Motorola Mobility P6LE1 Motorola Finiti User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1320549
Application ID	zbsbLX1hVV2ocAGw/zjxrg==
Document Description	user manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	206.63kB (2582898 bits)
Date Submitted	2010-08-02 00:00:00
Date Available	2011-01-23 00:00:00
Creation Date	2010-03-23 16:16:00
Producing Software	Acrobat Distiller 9.3.2 (Windows)
Document Lastmod	2010-07-30 09:38:54
Document Title	untitled
Document Creator	FrameMaker 9.0

Congratulations
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
Your Motorola Finiti™ headset delivers the
best sound in any condition and without raising
your voice. CrystalTalk™ dual microphones are
used for everyday noise cancellation, and the
stealth mode for windy or extreme conditions.
Some other cool features:
• Hear and reply to phone text messages with
MotoSpeak™.
• Hear the caller’s name and use your voice to
answer or ignore calls.
• Stream Bluetooth® music from your phone.
• Voice prompts to guide you on connections,
battery level, and other functions.
• Simultaneous connect with two phones.
We’ve crammed all of the main features of
your headset into this handy guide, and in a
Congratulations
matter of minutes we’ll show you just how
easy your headset is to use.
So go on, check it out.
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
more information
on the Web: www.motorola.com/support
Caution: Before using your headset for the
first time, please read the important Safety,
Regulatory & Legal information at the back
of this guide (page 25).
Congratulations
Your headset
the important parts
MicroUSB
Charging
Connector
side view
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
Call
Button
Ear
Loop
Power
Switch
Status
Light
Volume
Buttons
Earhook
Earpiece with
the
Stealth the Stealth
Mode Sensor
Mode
Button
Warning: Do not apply pressure or squeeze
the stealth mode sensor (small rubber balloon),
as it can damage the parts inside and will void
the warranty.
Your headset
Charge it
let’s get you up and running
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
Status Light
Red/Yellow - charging
Green - fully charged
While your headset is charging, you won’t be
able to use it.
Note: Your battery is designed to last the life of
your product. It should only be removed by a
recycling facility. Any attempt to remove or
replace your battery will damage your headset.
Charge it
Basics
a few essentials to get you started
Change ear fitting
Left
Ear
Spring
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
Your headset comes with multiple ear fittings.
Right
Ear
Spring
Large
Ear
Loop
Medium Small
Ear
Ear
Loop
Loop
Choose your ear fitting (loop or spring) so your
headset is comfortable.
1 Lift the current ear fitting
up and slide it off the
headset in an upward
direction.
Basics
2 Slide the new ear loop
or spring downward
onto the earpiece,
then align and push
the bottom onto the
groove.
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
Wear it
Groove
1 Bend the ear
loop or spring
and insert the
earpiece into
your ear.
the Stealth mode
sensor
Make sure
Ear canal
the stealth
mode sensor
is in contact with your ear canal.
Basics
2 Place the ear loop or spring in the bend of
your ear.
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
3 Flex the earhook and loop it over your ear,
and point the headset microphone towards
your mouth.
Basics
Turn it on & off
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
Power
Switch
On
Off
Listen to music
Note: This feature is phone dependent.
Your headset allows you to stream Bluetooth
music from your phone. Music playback is
started and controlled from your phone.
While a call is active, music pauses. When the
call ends, music resumes playing.
Basics
Enhanced call features
Tell headset to answer or ignore calls
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
Use your voice to answer or ignore an
incoming call:
• say “answer” to answer the call
• say “ignore” to ignore the call
Note: This feature does not work for second
incoming calls.
Hear caller’s name
If your phone knows your caller’s name, then
you hear “call from ” on an incoming
call.
Clean your headset
Keep your headset clean and dry. High
humidity or perspiration can make the ear
fitting feel slippery. Remove the ear fitting and
Basics
wipe it with a soft cloth to remove dirt and
moisture.
Note: Be very careful when wiping near the
stealth mode sensor.
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
Also check for any debris that may be blocking
the small speaker port on the ear fitting.
10
Basics
Pair & connect
connect and go
Pair & connect with your phone
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
1 Turn off any Bluetooth® devices previously
paired with your headset.
2 Turn on the Bluetooth feature on your
phone.
3 Put the headset on your ear (see “Wear it”
on page 6).
4 Turn on your headset (see “Turn it on & off”
on page 8).
The status light becomes steadily lit in blue
and you hear “ready to pair”.
5 Follow the voice prompts to connect your
phone to your headset.
Note: When prompted for the passkey,
enter 0000.
Pair & connect
11
When your headset successfully pairs with
your phone, you hear “pairing complete”.
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
For daily use, make sure your headset is turned
on, and your phone’s Bluetooth feature is on.
Your headset and phone connect automatically.
Pair & connect a second phone
1 Turn off first phone and any other Bluetooth
devices previously paired with your headset.
2 Turn your headset off.
3 Turn on the Bluetooth feature on your
phone.
4 Put the headset on your ear.
5 Turn on your headset.
The status light becomes steadily lit in blue
and you hear “ready to pair”.
12
Pair & connect
6 Follow the voice prompts to connect your
phone to your headset.
Note: When prompted for the passkey,
enter 0000.
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
When your headset successfully pairs with
your phone, you hear “pairing complete”.
To connect to both phones, turn on the first
phone while the second phone is connected.
When you hear “
connected”, your headset is connected to both
phones.
Test your call connection
1 Place the headset on your ear.
2 On your phone, dial a phone number and
press the Call/Send key.
If your phone and headset are successfully
connected, you hear ringing on the headset.
Pair & connect
13
Be clear
your voice, not all the noise
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
Always be heard during calls with the
CrystalTalk dual microphones and the stealth
mode sensor:
• CrystalTalk is always on to cancel out
everyday background noise.
• The stealth mode can be turned on when
noise and wind get really bad to shut out all
background noise.
Turn on the stealth mode
Press the Stealth
Mode button and
listen for the
“stealth mode on”
or “stealth mode
off” prompt.
the Stealth
Mode Button
14
Be clear
L
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
Note: Make sure the stealth mode sensor is
placed correctly and is in contact with the ear
canal (see page 6). It is normal for the sound of
your voice to be less “natural” in the stealth
mode.
Be clear
15
Calls
it’s good to talk
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
Note: Some features are phone/network
dependent.
To...
answer call
reject call
16
Press and hold the Call
button until you hear a tone.
Press both Volume buttons.
make a
voice dial
call
redial last
call
mute or
unmute a
call
Say “answer” or press the
Call button.
Say “ignore” or press and
hold a Volume button until
you hear a tone.
Press the Call button and you
hear a tone.
Calls
Press the Call button.
Press the Call button.
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
To...
end a call
answer
second
incoming
call
reject
second
incoming
call
turn on/off
stealth
mode
Press and hold a Volume
button until you hear a tone.
Press the stealth mode
button.
Tip: When connected to two phones, follow
the voice prompts to perform functions such
as voice dial, redial, and end call on the desired
phone.
Calls
17
Talk time
check your chat time
Press both Volume buttons while not on a call.
red
yellow
green
and/or you
hear...
your remaining
talk time is..
“battery level
is low”
less than 1.5
hours
“battery level
is medium”
between 1.5 to
3.5 hours
“battery level
is high”
more than 3.5
hours
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
if light
shows...
To save battery power, turn off the headset
when not using it.
18
Talk time
Status light
know your headset
If light shows...
your headset is...
IA
NT
IDE
NF
CO ATIO
LA
RO OR
TO INF
MO RY
T - IETA
AF
DR ROPR
&P
powering on/off
steady blue
in pairing/connect
mode
rapid blue/purple
flashes
connecting to your
phone
quick blue flash
receiving or making a
call on phone 1
quick purple flash
receiving or making a
call on phone 2
slow blue pulse
on a call
slow blue flash
in standby (not on a
call—connected to
one phone)
three blue flashes
Status light
19

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Creator Tool                    : FrameMaker 9.0
Modify Date                     : 2010:07:30 09:38:54+08:00
Create Date                     : 2010:03:23 16:16Z
Metadata Date                   : 2010:07:30 09:38:54+08:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:9d15d142-a736-45cf-a332-98c98b185d39
Instance ID                     : uuid:7528033e-b559-4e73-9ff0-1a247b8e1278
Has XFA                         : No
Page Count                      : 20
Creator                         : FrameMaker 9.0

EXIF Metadata provided by EXIF.tools