Motorola Mobility T56HG2 i335&i290; iDEN, MOTOtalk TRANSCEIVER W/ BLUETOOTH User Manual Sprint i335 UG

Motorola Mobility LLC i335&i290; iDEN, MOTOtalk TRANSCEIVER W/ BLUETOOTH Sprint i335 UG

USERS GUIDE

First Draft 6-15-07
First Draft 6-15-07
IMPORTANT NOTICE: PLEASE READ PRIOR TO USING YOUR PHONEThe SIM card provided in this kit is intended for use with the phone provided in this package. Loss of certain features will result when using a SIM card from one of the following models: i30sx, i35s, i50sx, i55sr, i58s, i60c, i80s, i85s, i88s, i90c, i95cl series, and the i2000 series.For more information on SIM card compatibility, go to www.motorola.com/iden.Defects or damage to your Motorola phone that result from the use of non-Motorola branded or certified Accessories, including but not limited to replacement housings and or other peripheral accessories, are excluded from warranty coverage. Please refer to the text of Motorola's Limited One Year warranty located in this user’s guide for complete details.First Draft 6-15-07
First Draft 6-15-07
DECLARATION OF CONFORMITYPer FCC CFR 47 Part 2 Section 2.1077(a)Responsible Party Name: Motorola, Inc.Address: 8000 West Sunrise BoulevardPlantation, FL 33322 USAPhone Number: 1 (800) 453-0920Hereby declares that the product:Product Name: i335Model Number: H98XAH6JR5ANConforms to the following regulations:FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)Class B Digital DeviceAs a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.First Draft 6-15-07
First Draft 6-15-07
1HELLOMOTOIntroducing your new Motorola i335 phone. Here’s a quick anatomy lesson.Speaker On/O KeyPTT ButtonAudio JackVolume KeysSpeaker beneath keypadUSB ConnectorInternal Antenna located hereLeft Soft KeyPerform function in lower left display.Talk KeyMake &answer calls.Menu KeyFrom home screen,open main menu.4-Way Navigation KeyRight Soft KeyPerform function in lower right display.Power/Home/End KeyEnd calls, exit menu system.OK KeyIn menus & lists, press to select highlighted option.First Draft 6-15-07
2check it outup, down, left or right ( )12Press the soMmrO keyto open theSettings screen Press and hold the Power Keyfor a few seconds, or until the screen lights up, to turn on your phone.34Press the O keyto select.Press the Navigation Key to highlight a menu feature. ((Home ScreenMain MenuMore ExitMain MenuTuLDq0glPFirst Draft 6-15-07
3Motorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196www.hellomoto.com1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Product Support:www.motorola.com/idenCertain mobile phone features are dependent on the capabilities and settings of your service provider’s network. Additionally, certain features may not be activated by your service provider, and/or the provider's network settings may limit the feature’s functionality. Always contact your service provider about feature availability and functionality. All features, functionality, and other product specifications, as well as the information contained in this user's guide are based upon the latest available information and are believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation.MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.© Motorola, Inc., 2007.Manual Number: TBDSoftware Version: TBDCP Version: TBDUSR Version: TBDFirst Draft 6-15-07
4contentscontentscheck it out . . . . . . . . . . . . 2menu map . . . . . . . . . . . . . 6Use and Care. . . . . . . . . . . 8essentials . . . . . . . . . . . . . 9about this guide . . . . . . 9SIM card . . . . . . . . . . . 10battery . . . . . . . . . . . . . 10turn it on & off . . . . . . 14enable security . . . . . 15make phone a call . . . 15answer phone a call . 15make a walkie-talkie call 15answer a walkie-talkie call 16store a phone number or walkie-talkie number 16call a stored phone number or walkie-talkie. . . . . . . . 17your phone number and walkie-talkie number 18main attractions . . . . . . . 19send via PTT. . . . . . . . 19one touch walkie-talkie 25PT manager . . . . . . . . 27MMS. . . . . . . . . . . . . . 28bluetooth® . . . . . . . . . 42basics . . . . . . . . . . . . . . . 43display . . . . . . . . . . . . 43text entry . . . . . . . . . . 44volume . . . . . . . . . . . . 47navigation key . . . . . . 47handsfree speaker . . 47codes & passwords . 48lock & unlock phone 48airplane mode . . . . . . 49calls. . . . . . . . . . . . . . . . . 50turn off a call alert . . 50recent calls . . . . . . . . 50redial. . . . . . . . . . . . . . 51voice commands. . . . 51caller ID . . . . . . . . . . . 52emergency calls . . . . 52international calls. . . 53speed dial . . . . . . . . . . 54turbo dial . . . . . . . . . . . 54voice mail . . . . . . . . . . 54Nextel Group Walkie-Talkie calls . . . . . . . . . . . . . . . 55customize. . . . . . . . . . . . . 60ring tones . . . . . . . . . . 60wallpaper . . . . . . . . . . 61backlight . . . . . . . . . . . 62datebook . . . . . . . . . . . 62hide or show location information . . . . . . . . . 62other features . . . . . . . . . 64advanced calling . . . . 64contacts . . . . . . . . . . . 65datebook . . . . . . . . . . . 65GPS . . . . . . . . . . . . . . . 66handsfree . . . . . . . . . . 68SMS messages . . . . . 68personalize . . . . . . . . . 69Safety and General Information First Draft 6-15-07
5contents72Limited Warranty Motorola Com-munications Products (Interna-tional) . . . . . . . . . . . . . . . . 79Hearing Aid Compatibility 83Information From the World Health Organization. . . . 85California Perchlorate Label 87Privacy and Data Security 88Smart Practices While Driving 89Index. . . . . . . . . . . . . . . . . 91First Draft 6-15-07
6menu mapmenu mapmain menu1NetLJava Apps.• Java SystemuSettings• (see next page)0VoiceRecord• [New VoiceRec]AContacts• [New Contact]• [New Group]EMessages• [Create Message]•Voice Mail• Inbox•Drafts• Sent Items• Net Alert•SMSPCall ForwardDDatebooklMemoMCall Timers• Last Call• Phone Reset• Phone Lifetime•DC/GC Reset•DC/GC Life• Circuit Reset• Circuit Lifetime• Kbytes ResetBRecent CallsKShortcuts•[New Entry]• 1)Shortcuts• 2)Cntcs[New Contact]• 3)Recent Calls• 4)Contacts• 5)Datebook• 6)Messages• 7)VoiceRecord•8)Net• 9)Call ForwardJMy Info•My Name• Line 1• Line 2• Walkie-Talkie• Group ID:• Carrier IP• Call Forward• IP1 Address• IP2 Address•Circuit DataoProfiles• [New Profile]• Standard•Car• Meeting•Office• Outdoors• HeadsetpCall AlertcGPS• Position• Privacy• InterfacetRing Tones• Vibrate All: On/Off• Ringers• VibrateDirecTalk• Go To DirecTalk• Setup•HelpOMy Pictures• SilentBluetooth• Audio Devices• Pair to Devices• Device History• Setup• Find MeNPT Manager• Walkie-Talkie• Send Event• Send My Info• Send Contact• ConfigureLWalkie-TalkieFirst Draft 6-15-07
7menu mapsettings menuDisplay/Info• Wallpaper•Text Size• Theme• Home Icons• Backlight•Clock• Menu View• Large Dialing• LanguagePhone Calls• Set Line•Any Key Ans• Auto Redial• Call Waiting•Auto Ans• Minute Beep• Call Duration• TTY• Notifications• DTMF Dialing• PrependDC/GC Optiond• Tkgrp Silent•Tkgrp Area• One Touch DC• Alert Type• PTT Quick Notes•On/Off PTT• Store Rcvd InfoPersonalize• Menu Options•Up Key•Down Key•Left Key• Right Key• Center Key• Left Sftkey• Right Sftkey•Power UpVolu me• Line 1• Line 2• Messages• Earpiece• Speaker•Keypad• Java Earpiece• Java Spkr•DataSecurity• Phone Lock• Keypad Lock• SIM PIN•GPS PIN• Change PasswdsAdvanced• Alert Timeout• Headset/Spkr• Connectivity• Reset Defaults• Return to Home• Transmitters• Phone Only•Baud RateFirst Draft 6-15-07
8Use and CareUse and CareUse and CareTo care for your Motorola phone, please keep it away from:liquids of any kind dust and dirtDon’t expose your phone to water, rain, extreme humidity, sweat, or other moisture.Don’t expose your phone to dust, dirt, sand, food, or other inappropriate materials.extreme heat or cold cleaning solutionsAvoid temperatures below -10°C/14°F or above 45°C/113°F.To clean your phone, use only a dry soft cloth. Don’t use alcohol or other cleaning solutions.microwaves the groundDon’t try to dry your phone in a microwave oven.Don’t drop your phone.First Draft 6-15-07
9essentialsessentialsabout this guideThis guide shows how to locate a menu feature as follows:Find it: M > Settings.This means that, from the home screen: 1Press the Menu Button M to open the Main Menu.2Press the navigation key to scroll to Settings, and press the center key O to select it.CAUTION: Before using the phone for thefirst time, read the Important Safety and Legal Information included in the gray-edged pages at the back of this guide.032257osymbolsThis means a feature is network/subscription dependent and may not be available in all areas. Contact Nextel Customer Service at 1-800-639-6111 for more information.This means a feature requires an optional accessory.First Draft 6-15-07
10essentialsSIM cardinsert the SIM cardTurn off your phone and remove your battery before you install or remove a SIM card.Carefully slide the SIM chip into your phone, until it lies flat in the SIM chip holder.Warning: To avoid loss or damage, do not remove your SIM chip from your phone unless absolutely necessary.batteryBattery Use & Battery Safety• Motorola recommends you always use Motorola-branded batteries and chargers. The warranty does not cover damage caused by non-Motorola batteries and/or chargers. Caution: Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. Improper battery use, or use of a damaged battery, may result in a fire, explosion, or other hazard.•Battery usage by children should be supervised.First Draft 6-15-07
11essentials•Important: Motorola mobile devices are designed to work best with qualified batteries. If you see a message on your display such as Invalid Battery or Unable to Charge, take the following steps:•Remove the battery and inspect it to confirm that it bears a Motorola “Original Equipment” hologram;•If there is no hologram, the battery is not a qualified battery;•If there is a hologram, replace the battery and retry charging it;•If the message remains, contact a Motorola Authorized Service Center.•New batteries or batteries stored for a long time may take more time to charge.• Charging precautions: When charging your battery, keep it near room temperature. Never expose batteries to temperatures below 0°C (32°F) or above 45°C (113°F) when charging. Always take your mobile device with you when you leave your vehicle•When storing your battery, keep it in a cool, dry place.•It is normal over time for battery life to decrease, and for the battery to exhibit shorter runtime between charges or require more frequent or longer charging times.• Avoid damage to battery and mobile device. Do not disassemble, open, crush, bend, deform, puncture, shred, or submerge the battery or mobile device. Avoid dropping the battery or mobile device, especially on a hard surface. If your battery or mobile First Draft 6-15-07
12essentialsdevice has been subjected to such damage, take it to a Motorola Authorized Service Center before using. Do not attempt to dry it with an appliance or heat source, such as a hair dryer or microwave oven.• Use care when handling a charged battery—particularly when placing it inside a pocket, purse, or other container with metal objects. Contact with metal objects (e.g., jewelry, keys, beaded chains) could complete an electrical circuit (short circuit), causing the battery to become very hot, which could cause damage or injury.Promptly dispose of used batteries in accordance with local regulations. Contact your local recycling center for proper battery disposal.Warning: Never dispose of batteries in a fire because they may explode.battery installation1Slide the release button back until it releases the battery door.2Remove battery cover.3Insert battery as shown below. Push the battery down until it snaps in place.First Draft 6-15-07
13essentialsbattery chargingNew batteries are not fully charged. charge using the charger1Pull out the connector cover, and insert the charger into the accessory connector on your phone as shown.2Plug the other end of the charger into the appropriate electrical outlet.3When your phone displays Charge Complete, remove the charger.When you charge the battery, the battery level indicator at the upper right of the screen shows charging progress. At least one 4Replace the battery cover.First Draft 6-15-07
14essentialssegment of the indicator must be visible to ensure full phone functionality while charging.charge from your computerYou can partially charge your phone’s battery by connecting a Motorola-approved USB cable from your phone’s mini-USB port to a high power USB connector on a computer (not a low-power one, such as the USB connector on your keyboard or bus-powered USB hub). Typically, USB high-power connectors are located directly on your computer.Your computer must be turned on, and you must have correct software drivers installed on your computer. If the Phone is off when the USB cable is connected between the computer and the phone, the phone will power up in charging mode. This mode allows the phone to charge fastest and quickest. If the phone is turned on while charging from a computer, it will not fully charge the battery. In this case, the battery charge will be maintained approximately between 80% and 95% of the battery's capacity. Cables and software drivers are available in Motorola OriginalTM data kits, sold separately.Tip: Motorola batteries have circuitry that protects the battery from damage from overcharging. Of course, unplugging the charger from the wall will avoid current drain.turn it on & offTo turn on your phone, press and hold E for a few seconds or until the display turns on.To turn off your phone, press and hold E for two seconds.First Draft 6-15-07
15essentialsenable securityYou must enable security the first time you power on you phone or within 10 days of first activation.1Press - under Ok.2Your are prompted to enable security. Press - under Yes. A series of screens followed by the default home page displays.3Press O to return to the idle screen.make phone a callEnter a phone number and press S to make a call.To hang up press E.answer phone a callWhen your phone rings and/or vibrates press S to answer.To hang up press E.make a walkie-talkie callNextel Walkie-Talkie calls allow you use your phone as a long-range, digital 2-way radio to communicate with other Nextel Walkie-Talkie users within the Nextel Nation Network.Your Walkie-Talkie number is the number at which you receive Nextel Walkie-Talkie calls.Calling someone’s Walkie-Talkie number allows you to talk to the person one-to-one. You can also use your phone as a long-range, digital 2-way radio to communicate with groups of other Nextel Walkie-Talkie users by calling a Group (a group of Walkie-Talkie number of Nextel Group Walkie-Talkie users First Draft 6-15-07
16essentialsthat you put together) or Talkgroup ID (a group of Nextel Walkie-Talkie numbers put together for you by an account administrator).To make a Walkie-Talkie call:1Enter the Walkie-Talkie number you want to call.2Press and hold the Walkie-Talkie button. Begin talking after your phone emits a chirping sound.3Release the Walkie-Talkie button to listen.To end the call press O.A Walkie-Talkie call ends automatically if there is no activity on the call for a few seconds.Tip: To let someone know you want to talk to them on a Walkie-Talkie call, press - under Alert.answer a walkie-talkie callWhen your phone emits a chirping sound or vibrates to indicate you are receiving a Walkie-Talkie call, wait for the caller to finish speaking. 4Press and hold the Walkie-Talkie button and begin talking after your phone emits a chirping sound.5Release the Walkie-Talkie button to listen.To end the call, close the flip or press O, or press - under Exit.store a phone number or walkie-talkie numberYou can store a phone number or Walkie-Talkie number in Contacts:First Draft 6-15-07
17essentials1PressM > Contacts > [New Contact].2Enter a name for the new entry. Each entry’s name can contain up to 20 characters.3Select Ring Tones if you wish to assign a specific ring tone to that phone number.4Select a type for the entry (Mobile, Work1, Work2, Home, Fax, Pager, or Other). To store a Walkie-Talkie number, choose DC.5Enter the number for the entry and press - under Done to save the entry.Tip: Before saving the entry, you can save more information. You can store E-mail addresses, IP addresses, or Talkgroup IDs. You can assign each number a speed dial number and voice name. You can also create Contact entries that are groups of Walkie-Walkie numbers called Group\s.After you have saved the number, the new Contacts entry is displayed.call a stored phone number or walkie-talkieShortcut: From the idle screen press - under Contcs orFind it: M > Contacts1Scroll to the Contacts entry.Tip: By pressing the first letter of the name of the Contacts you want, you will be taken to all the contact names starting with the letter you pressed.2If the Contacts entry contains more than one number, scroll left or right until the type of the number you want to call is displayed (Mobile, DC, Work 1, Work 2, Home, etc.).3If you choose a phone number, press S to call the entry.First Draft 6-15-07
18essentialsorIf you choose a Walkie-Talkie number, Talkgroup ID, or Group, press and hold the Walkie-Talkie button to call the number.Tip: If the Contacts entry you scrolled to contains a Walki-Talkie number, you can make an instant Walkie-Talkie call to that Walkie-Talkie number by pressing and holding the Walkie-Talkie button, even if the Walkie-Talkie number is not the type of number displayed.your phone number and walkie-talkie numberFind it: M > My InfoTip: Want to see your phone number or Walkie-Talkie while you’re on a call? Press M > My Info.First Draft 6-15-07
19main attractionsmain attractionssend via PTTYour phone can send and receive the following items through Nextel Walkie-Talkie calls with other phones that have this capability:•Short text messages*•Pictures*•Datebook events•My Info•Contact information*Additional charges may apply.You can choose to send My Info and contact information to any Walkie-Talkie number.You can choose to send pictures, messages, events to the Walkie-Talkie number you are engaged in a Walie-Talkie call with, Walkie-Talkie numbers on the Recent Calls list, and Walkie-Talkie numbers stored in Contacts.When you make or receive a Walkie-Talkie call, your phone automatically determines whether the phone you are engaged in a Walkie-Talkie call with is able to receive each of these items. Your phone saves this information for as long as the Walkie-Talkie number is on your Recent Calls list or is saved in your Contacts. Your phone updates the saved information each time you make or receive a call to or from that Walkie-Talkie number.First Draft 6-15-07
20main attractionsYou can turn your phone’s ability to send and receive messages, pictures, events on and off.You cannot send any of these items during Talkgroup calls. You cannot send messages or pictures during Talkgroup calls or Group calls. send messagesThe Push to Send Messages feature lets you send short text messages through Walkie-Talkie calls. When you send a message, it appears on the display of the phone you are engaged in the Walkie-Talkie call with. After the call, the message appears in the Recent Calls list of that phone. begin a message and choosing a recipient You can begin a message during a Walkie-Talkie call, from the Contacts list, the Recent Calls list, or from the PT Manager.begin a message during a Walkie-Talkie call:While in a Walkie-Talkie call, press M > Use PTT Feature > Send Message.begin a message from the Contact or the Recent Calls list1From the Contacts or the Recent Calls list, select the entry containing the Walkie-Talkie number you want to send the message to.2Press M > Use PTT Feature > Send Message.The PT Manager lets you select the Walkie-Talkie number you want to send the message to from Contacts or the Recent Calls list.First Draft 6-15-07
21main attractionsFind it: M > PT Manager > Send Message > Send To.Then select A Contact or A Recent Call to see a list of entries from the Contacts or the Recent Calls list that can receive messages.create and send messages After you have begun a message and chosen a recipient, a screen appears that lets you create the text of the message you want to send. Your message may be up to 400 characters long. You can choose from a list of ready-made words or short phrases called Quick Notes. You can use it Note for this message only and will not change the Quick Note on the list. send a completed messageAfter you have completed your message, press the Walkie-Talkie button to send it.receive messages When you receive a message, a message notification appears on the display. To view the message: Press - under Read. To dismiss the message press - under Dismiss.reply to a message1View the message.2Press - under Reply.3Create the message and press the Walkie-Talkie button to send it.send picturesYou can send pictures stored in My Pictures through Walkie-Talkie calls. The picture you send appears on the Walkie-Talkie call recipient’s display. First Draft 6-15-07
22main attractionsIf the recipient accepts the picture, their phone saves the picture. The picture then appears in that phone’s recent call list.The first time you send a stored picture after turning the phone on, Picture Fees May Apply. Continue? appears and you are prompted to respond.Note: You cannot make or receive Walkie-Talkie calls while transmitting or receiving a picture.send a picture during a call1While in a Walkie-Talkie call, press - under Picture or press M > Use PTT Feature > Send Picture.A list of pictures that can be included in a Walkie-Talkie call appears.2Select the picture you want to send.3Press the Walkie-Talkie button to send the picture. 4Wait while the picture is transmitted. The Walkie-Talkie call is temporarily interrupted while a picture is transmitted. 5When prompted, press the Walkie-Talkie button to resume the Walkie-Talkie call. start a call by sending a picture from My PicturesFind it: M > My Pictures1Select the picture you want to send.2Press M > Use PTT Feature > Send Picture.A list of contacts that have Walkie-Talkie numbers and are able to receive pictures appears.3Select the name of the person you want to send the picture to.4Press the Walkie-Talkie button to send the picture. First Draft 6-15-07
23main attractions5When prompted, press the Walkie-Talkie button to resume the Walkie-Talkie call. from the PT Manager:Find it: M > PT Manager > Send Picture.1Select A Contact, or A Recent Call to see a list of entries that can receive pictures.2Select the entry containing the Walkie-Talkie numbers you want to send the message to.3Select the picture you want to send.4Press the Walkie-Talkie button to send the picture.5Once picture has been sent, when prompted press the Walkie-Talkie button to resume the call.receive a picture When someone sends you a picture, your phone emits a tone or vibrates and a message appears asking if you want to accept the picture. Pictures you receive are saved to your phone’s memory or a memory card. They are accessible through the media center. When you see a message asking if you want to accept the picture, press Yes to accept or No to decline.Tip: If you want to stop the transmission before it is finished, press E. Note: The first time you accept a stored picture after turning the phone on, Messaging Fees May Apply. Continue? appears and you are prompted to respond. Press - under Yes to accept the picture.clear a picture from the display If you want to clear a picture from your phone’s display while still on a call, press M > Clear Screen. First Draft 6-15-07
24main attractionsThe picture will not appear on the display again the next time you receive a call from person who sent it. This does not delete the picture from My Pictures.turn PTT features on and off You can turn your phone’s ability to send and receive messages, pictures, and Datebook events on and off. You cannot turn your phone’s ability to send and receive My Info and contact information on and off. Find it: M > PT Manager > Configure1Select On/Off PTT.2Check or uncheck Messages, Pictures and/or Events.set my info sending optionYou can control what portion of the information in My Info is sent and whether it is sent automatically in every call or only when you choose to send it. information sent The information your phone sends always includes My Name and DC. You may also send Line 1, Line 2, Carrier IP, and Circuit Data, depending on your sending options. To change the fields you send:Find it: M > PT Manager > Configure > PTT My Info > Info to Send1Select or remove the fields you want to send.2Press - under Done.First Draft 6-15-07
25main attractionsautomatic sending To control whether you send your information automatically: Find it: M > PT Manager > Configure > PTT My Info > Auto Send > On or OffWhen you make a call in which your information is sent automatically, the name you entered in the My Name field of My Info appears on the display of the recipient’s phone, even if your name and Walkie-Talkie number are not stored in the recipient’s Contacts.one touch walkie-talkieOne Touch Walkie-Talkie sets your phone to do any of the following each time you press the Walkie-Talkie button: •Call the most recent Walkie-Talkie number or Group on the recent calls list •Call a Walkie-Talkie you assign •Go to Walkie-Talkie •Go to PT Manager •Go to the first screen to send a message, picture, Datebook event, My Info, or contact information during a call set one touch PTT to call recent calls Find it: M > PT Manager > Configure > One Touch PTT > Last CallFirst Draft 6-15-07
26main attractionsset one touch PTT to call assigned IDsFind it: M > PT Manager > Configure > One Touch PTT > Assigned No.1Enter the number using your keypad or press Search > Contacts, Recent Calls, or Memo.2Select the number you want to enter. Tip: If you are entering a Talkgroup number, enter # before the number.set one touch walkie-talkie to another optionYou can set up the Walkie-Talkie button to access Walkie-Talkie, recent Walkie-Talkie calls or the PT Manager in one touch.Find it: M > PT Manager > Configure1Select Quick PTT, Last Call, or PT Managerturn off one touch walkie-talkie Find it: M > Settings > 2-Way Radio > One Touch PTT > OffWalkie-TalkieWalkie-Talkie lets you quickly make a call, create a Group or make a Group Walkie-Talkie call when accessing any Walkie-Talkie number on your phone. To view a list of Contacts with Walkie-Talkie numbers and Groups in Contacts: Find it: M > PT Manager > Quick PTTorFind it: M > Quick PTTTo move between Contacts, Recent Calls, or Memo, use the left or right, or press * or #.To make a Walkie-Talkie call or Group Walkie-Talkie call: First Draft 6-15-07
27main attractions1Select the entries you want.2Press Done.3Push the Walkie-Talkie button.save your selections as a Group1Press M > Store Group.2If you want to assign a name to the Group, enter the name.Note: If you do not assign a name, the Group is named “Group” followed by the number of members in the Group. For example, “Group (8”) for a Group with 8 members.PT manager The PT Manager lets you quickly access PTT features, and other Walkie-Talkie call features, from the main menu. You can also access the Walkie-Talkie feature and set the One Touch Walkie-Talkie feature. Find it: M > PT Manager 1Select Walkie-Talkie to quickly find a contact that has a Walkie-Talkie number.or2Select Send Message, Send Picture, Send Event, Send My Info, or Send Contact. After choosing what PTT item you are sending, select a contact and press the Walkie-Talkie button to send.or3Select Configure to configure your PTT Quick Notes, PTT My Info, One Touch PTT, or On/Off PTT.First Draft 6-15-07
28main attractionsMMSMulti-Media Messaging Service (MMS) lets you send and receive messages that may include text, pictures and audio recordings. create a message Shortcut: From the idle screen press - under Msgs > [Create Message]. or Find it: M > Messages > [Create Message].1Select To and add the phone number or email address or select from Contacts or Recent Calls and press - under Back.Tip: To remove a phone number or email address from the list of message recipients, scroll to the phone number or email address and press - under Remove.2Select Mesg and enter text or press - under QNotes to select a pre-written quick note. Press - under Back.3Scroll down and select .....MORE..... or press - under More.4Select Subject and enter text or press - under QNotes to select a pre-written quick note.5You can insert a list of replies the recipient can choose from when replying to your message by selecting Auto Replies. Yo u c a n enter several text choices or press - under QNotes to select a pre-written quick note. Press - under Back.6To set the priority of the message, select Priority > Normal or High. Press - under Back.7To receive a report confirming your message delivery, select Report > On Delivery.First Draft 6-15-07
29main attractions8To set a date after which attempts to deliver the message end, select Valid Until and choose a date.9Press - under Send. reply to a message You can reply to a message while you are viewing it, or while a previously viewed message is highlighted in the message center. You cannot reply to unread messages.Shortcut: From the idle screen press - under Msgs > [Create Message]. 1Scroll to the message you want to reply or press the number of the message.2To reply to the sender only, press - under Reply or if you wish to include all the people copied in the message, press - under Reply All. A list of short phrases appears. Select any of these phrases to add it to your messages or select [Create Reply].3Edit any message fields you want to change. 4Press - under Send. quick notesWhen you are filling in the Message and Subject message fields, you can add ready-made words or short phrases called Quick Notes. After you add these words or phrases, you can edit them as you would any other text. 1While you are creating a message, scroll to or select Message or Subject. 2Press - under QNotes.Select the Quick Note you want to insert into the message. 3Press - under Send.First Draft 6-15-07
30main attractionsattach a picture and audio recording or a ring toneYou can attach one or more pictures audio recordings or ring tones from your phone into the body of the message. You can include text in the body of your message in addition to these items. While you are filling in the Attach field, press [New] > My Pictures, VoiceRecord or Ring Tones.A list of available pictures, audio recordings and ring tones appears. Select the picture, voice record or ring tone you want to attach. Tip: To view or listen to the item before attaching it, highlight it and press View or Play. create a new voice record You can create a new voice record to send with a message:1Press M or press - under Attach > [New].2Select VoiceRecord > [New VoiceRec]. 3Say the message you want to record into the microphone. 4When you are finished recording, press O. 5When you are finished, press - under Back and - under Done. The voice record is attached to the message and saved to the list of voice records. remove an attachment To remove an attachment in a message you are creating: 1Select Attach.2Scroll to the attachment you want to remove. 3Press M > Unattach. First Draft 6-15-07
31main attractionsdrafts While you are creating a message, you can save it in the MMS drafts folder before you send it. You can view, edit, send, or delete saved drafts. save a message in the MMS drafts folder From the Message center press M > Save.You can continue to create the message. The version you saved in the MMS drafts folder will not change.send a draft Find it: M > Messages > Drafts.1Select the draft you want to send.2Press M > Send.edit a draft Find it: M > Messages > Drafts.Select the draft you want to edit and press O.delete a draft When you send a draft, it is removed from the MMS drafts folder.To delete a message in the MMS drafts folder without sending it, scroll to the message you want to delete and press - under Delete and - under Yes. MMS outbox MMS messages you have sent or tried to send are stored in the MMS Outbox.forward items from the outbox Find it: M > Messages > Sent Items. First Draft 6-15-07
32main attractions1Scroll to the message you want to forward.2Press M.3Select Forward. 4Edit and send your message.resendIf a message was not sent from your handset, you can resend it. Find it: M > Messages > Sent Items. 1Scroll to the message you want to resend. 2Press Resend. Note: If your message was sent successfully, Resend will not appear as an option.check delivery status If a message was successfully sent and you set the message to give a report confirming delivery, you can check the delivery status: Find it: M > Messages > Sent Items.1Scroll to the message you want to view.2Press M.3Select Delivery Status. delete a message1Scroll to the message you want to delete.2Press - under Delete or 3Press M > Delete Multiple.4Select the message or messages you want to delete5Press - under Delete to confirm. First Draft 6-15-07
33main attractionsreceive a message When you receive an MMS message, a message notification appears on the display. 1To view the message press O. 2If the message fills more than one screen, use the navigation key to scroll down and read the remaining text. message notificationsWhen you receive a message, your phone notifies you with text on the display, a notification tone or vibration.You can access the message or dismiss the notification.If you dismiss the notification, the message is not deleted. It can be accessed through the message center.If you are not on a phone call when you receive a message, your phone sounds a notification tone every 30 seconds until you access the message or dismiss the alert.If you are on a call when you receive a message, your phone may sound a notification tone during the call or after you end the call, depending on how you set your notification options.setting notification optionsTo control whether your phone sounds message notification tones while you are on a phone call:Find it: M > In Call Setup > Notifications.Select the option you want:•Receive All — Tones sound during calls for all types of messages.•Msg Mail Only — Tones sound during calls for mail messages; tones for all other types of messages are held until you end calls.First Draft 6-15-07
34main attractions•Delay All — Tones for all types of messages are held until you end calls.Note: Delay All is the default setting.Tip: To set notification options during a call press M > In Call Setup > Notifications.embedded objects and attachmentsMessages may contain pictures or audio recordings as part of the body of the message or as attachments. If a message contains pictures or audio recordings in the body of the message, highlight each picture or audio recording to view or play it. If a message contains a picture or audio recording as an attachment, open the attachment to view the picture or play the audio recording. open attachments 1View the message. 2Highlight the attachment you want to open and press O. Attachments appear at the end of a message.Note: Attachments that are of an unknown type cannot be opened, but they can be deleted.view received messages from the message center 1Press M > Messages > Inbox. 2Select the message. If the message has not yet been downloaded from the message server, it is downloaded now. First Draft 6-15-07
35main attractionsuse auto repliesIf the message you are replying to was sent with auto replies, it contains a numbered list of possible replies for you to send. Press the number of the reply you want to send. The reply is sent immediately without further action.delete unread messages 1Scroll to the message you want to delete. 2Press - under Delete. 3Press - under Yes to confirm. forward a message 1Press M > Forward. 2Create and send your message. Embedded objects and attachments are included when you forward a message. lock and unlock messagesLocked messages cannot be deleted until you unlock them. 1View the message you want to lock or unlock. 2Press M > Lock Message or M > Unlock Message. call a number in a message If a message you receive contains a phone number, Walkie-Talkie number, or Talkgroup ID in the From field, the To field, the Cc field, the subject line, or the body of the message, you can call or send a call alert to that number. send a call alert 1View the message.2Highlight the Walkie-Talkie number or Talkgroup ID you want to alert.First Draft 6-15-07
36main attractions3Press M > Alert.4Push the Walkie-Talkie button.make a group call1View the message.2Press M.3Highlight the Talkgroup ID you want to call.4Select Talkgroup.5Push the Walkie-Talkie button.store message information to contacts If a message you receive contains a phone number, Walkie-Talkie number, Talkgroup ID, or an email address in the From field, the To field, the Cc field, the subject line, or the body of the message, you can store this information to Contacts. 1View the message. 2Highlight the number or email address you want to save. 3Press M > Save Number or M > Save Email. 4To store the number or email address as a new entry, select [New Contact].To store the number or email address to an existing entry, select the entry. 5With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number or email address. 6Press Save. go to a website If a message contains one or more website URLs, you can go to that website. 1View the message. First Draft 6-15-07
37main attractions2Highlight the website URL you want to go to. 3Press M > Go To Website. Note: The entire URL must appear in the message to allow you to open the website. save an embedded picture or audio recording To save a picture or audio recording that is part of the body of a message you receive: 1View the message. 2Highlight the picture or audio recording you want to save. 3Press M > Save Picture or M > Save Audio. The item will save in the default storage location.Note: Some types of pictures and audio recordings can be viewed or played, but not saved. delete an embedded picture or audio recording To delete a picture or audio recording that is part of the body of a message you receive: 1View the message. 2Highlight the picture or audio recording you want to delete. 3Press M > Delete Picture or M > Delete Audio. Note: You may save or delete pictures and audio recordings from slide shows individually as you view or listen to them.save attachments 1View the message.2Highlight the attachment you want to save. 3Press M > Save Attachment. First Draft 6-15-07
38main attractionsSelected items save to the default storage location. Note: Some types of pictures and audio recordings can be viewed or played, but not saved.delete attachments 1View the message. 2Highlight the attachment you want to delete. 3Press M > Del Attachment. 4Press - under Yes to confirm. save a picture1View the slide show. 2When the picture you want to save appears, press M. 3Select Save Picture. save audio 1View the slide show. 2Press M > Save Audio. 3If the slide show contains more than one audio recording, a list of the audio recordings appears. Select the audio recording you want to save. delete a slide show1Highlight the slide show or view the slide show. 2Press M > Delete Slideshow.message transmission After you start to send a message you have created or start to download a message you have been sent, you can still stop the message transmission from being completed by pressing u.First Draft 6-15-07
39main attractionscustomize MMSFind it: M > Messages > M > SetupTip: This option is available from many context-sensitive menus when you are using MMS. The MMS Setup menu lets you customize MMS for your handset:Friendly Name — Enter text here to create a friendly name. Your friendly name is the name displayed in the From field on other iDEN handsets when they receive messages from you. Signature — Enter text here to create a signature. Your signature is text that is automatically inserted at the end of all messages you create. You can edit the text before sending the message. Quick Notes — Lets you create new Quick Notes and edit or delete Quick Notes you have created. Replies — Lets you create new reply phrases and edit or delete reply phrases you have created. Cleanup — Controls how long messages remain in the Inbox and Outbox before they are deleted.Download — Controls whether your phone automatically downloads new messages when they arrive, or only after you respond to a prompt or read the message from the Inbox. Set this option to Automatic if you want your phone to download new messages automatically; set the option to Manual if you want your phone to prompt you before downloading new messages. Memory Size — Shows the total amount of Used, Free:, and total Capacity of the phone’s memory.First Draft 6-15-07
40main attractionsnew quick notes and reply phrasescreate quick notes1From the MMS Setup menu, select Quick Notes or Replies. 2Select [New Quicknote] or [New Reply]. 3Enter text from the keypad. edit quick notesYou can edit only Quick Notes and reply phrases you have created. 1From the MMS Setup menu, select Quick Notes or Replies. 2Select the Quick Note or reply phrase you want to edit. 3Edit the text. delete only Quick Notes and reply phrases you have created1From the MMS Setup menu, select Quick Notes or Replies. 2Scroll to the Quick Note or reply phrase you want to delete. 3Press - under Delete. 4Press - under Yes to confirm. cleanupThe Cleanup option controls how long messages remain in the Inbox and Sent Items before they are deleted. You set the cleanup option for the Inbox and Sent Items separately. The cleanup option deletes only read, unlocked messages. First Draft 6-15-07
41main attractionscleanup options Off — Messages are never automatically deleted.5 Messages — If you have more than 5 messages, messages are deleted in the order they were received, starting with the oldest, until 5 are left. 10 Messages — If you have more than 10 messages, messages are deleted in the order they were received, starting with the oldest, until 10 are left.With these options, messages are deleted in the order they were received, starting with the oldest, until the selected number are left.1 Day — Messages are deleted if they are older than 1 day. 3 Days — Messages are deleted if they are older than 3 days. With these options, messages are deleted when you exit the message center after setting the option.Custom — Lets you create a clean-up option of up to 99 messages or 99 days. set cleanup1From the MMS Setup menu, select Cleanup > Inbox or Sent Items. 2Select Off, 5 Messages, 10 Messages, 1Day, 3 Days, or Custom to enter a different number of days.delete multiple or all messages To delete all unlocked messages from the MMS Inbox, all messages in the MMS Drafts folder, or all successfully sent messages in the MMS Sent Items: 1Press M > Delete Multiple, and check the messages you want to delete.First Draft 6-15-07
42main attractionsor2Select Delete All and press - under Yes to confirm.bluetooth®Your phone supports the use of wireless Bluetooth stereo headsets.Find it: M > m > Bluetooth.The Bluetooth connection menu contains an option to search for audio devices including stereo Bluetooth devices.set your phone for BluetoothYou can configure the following aspects of Bluetooth:•Power•Device name•Voice dialing•Find Me durationturn Bluetooth On or OffYou can turn your phone’s Bluetooth feature on or off. While Bluetooth power is on, your phone can communicate with other devices.Find it: M > m > Bluetooth > Setup > Power.You can turn off Bluetooth if you want to prolong battery life or you enter an area where Bluetooth is prohibited.First Draft 6-15-07
43basicsbasicsSee page 1 for a basic phone diagram.displayThe home screen shows when you turn on the phone. To dial a number from the home screen, press number keys andS.Note: Your home screen may look different.Soft key labels show the current soft key functions. For soft key - locations, see page 1.status indicatorsStatus indicators can show at the top of the home screen:1Signal Strength Indicator – Vertical bars show the strength of the network connection. You 1. 2. 3. 4. 5. 6. 7.First Draft 6-15-07
44basicscan’t make or receive calls when 1 or 0 shows.2Active Phone Line – 1 indicates phone line 1 is ready to make calls.3Speaker Off – Sounds associated with Walkie-Talkie calls and group calls are set to come through the earpiece rather than through the speaker.4Ringer Off – Your phone is set to not ring.5Message Indicator – Shows when you receive a text message. 6Packet Data– Your handset is ready to transfer packet data or is transferring packet data.7Battery Charge Indicator – A fuller battery indicates a greater charge. Recharge the battery when your phone shows Low Battery. text entrySome features let you enter text.Your phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when text messaging).change the character input mode:1When you display a screen where you can enter text, press M to change the character input mode.First Draft 6-15-07
45basics2Select one of the following options:Tip: When entering text, press # to change letter capitalization (Abc > ABC > abc).word modeWord English Text Input lets you enter text into your phone by pressing keys just once per letter.Word English Text Input analyzes the letters you enter using an intuitive word database and creates a suitable word. (The word may change as you type.) enter a word using Word Character Input:1Select the Word character input mode. 2Press the corresponding keys once per letter to enter a word (for example, to enter the word Jeff, press 5333). (If you make a mistake, press * to erase a single character. Press and hold * to delete an entire entry.)3To accept a word and insert a space, press#.alpha modeenter characters by tapping the keypad:1Select the Alpha mode.entry modesAlphaPress a key several times for each character.WordEnter words using a predictive text entering system that lets you enter a word with fewer keypresses.SymbolsEnter symbols.NumericEnter numbers by pressing the numbers on the keypad.First Draft 6-15-07
46basics2Press the corresponding keys repeatedly until the desired letter appears. (For example, to enter the word Jeff, press 5 once, 3 two times, 3 three times, and 3 three times again. If you make a mistake, press Delete to erase a single character. Press and hold Delete to erase an entire word.)By default, the first letter of an entry is capitalized and the following letters are lowercased. After a character is entered, the cursor automatically advances to the next space after two seconds or when you enter a character on a different key.Characters scroll in the following order: characters1. ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ ¥2A B C 23D E F 34G H I 45J K L 56M N O 67P Q R S 78T U V 89W X Y Z 90+ - 0 * / \ [ ] = > < # §#Space*ShiftcharactersFirst Draft 6-15-07
47basicsvolumePress the volume keys up or down to:•turn off an incoming call alert•change the earpiece volume during calls•change the ringer volume from the home screenTip: Sometimes silence really is golden. That’s why you can quickly set your ringer to Vibrate All by holding the down volume key in the home screen.navigation keyPress the navigation key up, down, left, or right to scroll to items in the display. When you scroll to something, pressO.handsfree speakerYou can use your phone’s hands-free speaker to make calls without holding the phone to your ear.During a call press the speaker key s to turn the hands-free speaker on.The hands-free speaker stays on until you press the speaker key or end the call. The next phone call will redirect the audio back to the earpiece.First Draft 6-15-07
48basicscodes & passwordsThe Security menu lets you turn security features on and off and change passwords:Find it: M > u > SecuritySIM PIN — Enables and disables your phone’s SIM PIN security feature.GPS PIN — Enables and disables your phone’s GPS PIN security feature.Change Passwds — Changes your phone unlock code, security code, SIM PIN, and GPS PIN.lock & unlock phoneFind it: M > u > SecurityPhone Lock — Turns on a feature that locks your phone: Lock Now takes effect immediately; Auto Lock takes effect when your phone is powered off and then on. An unlock code is required to enable this feature, to unlock the phone, and to set a new unlock code. Contact Nextel Customer Service at 1-800-639-6111 for your default unlock code.Keypad Lock — Locks the phone’s keypad, either immediately or automatically after a set period of inactivity.lock keypadYou can lock your phone’s external keys to prevent accidental key presses.lock the external keys automatically after a specified time:Find it: M > u > Security > Keypad Lock > Auto LockTip: You can lock the keypad inmediately by pressing M and *First Draft 6-15-07
49basicsairplane modeNote: Consult airline staff about the use of Airplane Mode during flight. Turn off your phone whenever instructed to do so by airline staff.Airplane mode turns off your phone’s calling features in situations where wireless phone use is prohibited. You can use the phone’s other non-calling features when Airplane Mode is turned on.Find it: M > u > Advanced > Transmitters1Select Off to activate airplane mode.First Draft 6-15-07
50callscallsTo make and answer calls, see page 15.turn off a call alertYou can press the volume keys to turn off a call alert before answering the call.recent callsThe Recent Calls list contains information associated with calls you have made and received and call alerts you have received.When you send or receive Walkie-Talkie calls, the Recent Call list contains the following Send via PTT items with those calls:•Messages•Pictures•Events•My Info•ContactsThe recent calls list displays up to 20 of the most recent calls and call alerts.Find it: M > Recent Calls.Tip: You can also access the Recent Calls list by pressing the navigation key down.1Scroll through the list.2Highlight the item you want to view or perform some action on.3To view more details of the item press O.First Draft 6-15-07
51callsstore an item to contact from recent callsPhone calls, Walkie-Talkie calls, My Info received from other phones, or Contacts entries received from other phones can be stored to the Contacts list from the Recent Calls list.Find it: M > Recent Calls.1Scroll to or select the item you want to store.2Press - under Save to store the information as a new entry in the Contacts list.or3If Save is not one or you options, press M > Update Contacts > Store To. And select the contact you want to update.4Press - under Done to save your changes.redialTo redial your last outgoing phone call, press and hold N or push the Walkie-Talkie button if it was a Walkie-Talkie call.voice commandsYou can place calls by speaking comands to your phone if you have previously assigned a voice name to your contacts.assign voice names to contacs:1Press - under Contcs and select [New Contact].2Assing a name, phone number and select [Options].3Select Voice Name and follow the propmt to record the voice name.4Press - under Back and - under Done to save the entry.First Draft 6-15-07
52callsplace a call using voice command:1From the home screen press and hold the speaker key s until you are prompted to say the voice name.The handset will automatically place the call.caller IDCaller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, just follow these easy steps.To block your phone number from being displayed for a specific outgoing call:1Press *67.2Enter the number you want to call.3Press S.To permanently block your number, call Nextel Customer Service at 1-800-639-6111.emergency callsNextel programs one or more emergency phone numbers that you can call under any circumstances, even when your phone is locked or the SIM card is not inserted.Note: Emergency numbers vary by country. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.Your phone supports emergency calling. Emergency phone calls can be made even when your SIM card is blocked or not in your phone.Dial 911 or your local emergency number to be connected to an emergency response First Draft 6-15-07
53callscenter. If you are on an active call, you must end it before making an emergency call. When you make an emergency call, your phone’s GPS Enabled feature can help emergency service personnel find you, if you are in a location where your phone's GPS antenna has established a clear view of the open sky and your local emergency response center has the equipment to process location information. Because of the limitations of this feature, always provide your best knowledge of your location to the emergency response center when you make an emergency call.Note: Emergency calls cannot be placed while the keypad is locked.Note: If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone.international callsYour service default is “International Calls Restricted”. Contact Nextel Customer Serive to obtain international dialing access.Calls placed between the United States and Canada do not require an international access code.Plus Dialing lets you place an international call to most countries without entering the local international access code.If your phone service includes international dialing, press and hold 0 to insert your local international access code (indicated by +). Then, press the keypad keys to dial the country code and phone number.You can aditionally enable a predefined prefix to the dialing number by using Prepend dialing.Find it: M > Settings > Phone Calls > Prepend.1Select Prepend and set it to On.First Draft 6-15-07
54calls2Select Number and add the prefix number of your choice.When the Prepend feature is set to On, the predefined prefix is inserted to the front of the number that you are dialing.speed dialEach phone number stored in Contacts is assigned a Speed Dial number, which you can use to call that number.1From the idle screen, use the keypad to enter the Speed Dial number assigned to the phone number you want to call.2Press #.3Press S.turbo dialThe first nine entries in your contacts are set for turbo dial. They can be called by pressing and holding the speed dial number (1 through 9).voice mailNote: To receive voice mail messages, you must first set up a voice mail account with Nextel.receive a messageWhen you receive a voice mail message, New VoiceMail Message appears on the display.To check voicemail messages press - under Call.To dismiss the message notification press O, or - under Back.First Draft 6-15-07
55callsIf the caller leaves a message, this icon y appears on the display, reminding you that you have a new message.Nextel Group Walkie-Talkie callsA Nextel Group Walkie-Talki call is similar to a Walkie-Talkie call, but is made to all members of a Group at once. A Group is a group of Walkie-Talkie numbers that you create using your phone. A Group must contain at least 2 members and can contain up to 20 members.You can create a Group for one call only or store it to Contacts so you can call it any time.You can use Send via PTT to send SDG lists to other phones that have this capability.create Group lists in contactsShortcut: From the idle screen press - under Contcts. 1Select [New Group].Tip: You can also create a Group by selecting [New Contact] and assigning the Group contact type. If you want to assign a name to the Group, enter the name.Note: If you do not assign a name, the Group is named “Group” followed by the number of members in the Group. For example, “Group (8)” for a Group list with 8 members.2Add Walkie-Talkie numbers. See “add walkie-talkie numbers”below.3If you want to create a voice name for the Group, select [Options] > Voice Name. As directed by the screen prompts, say and First Draft 6-15-07
56callsrepeat the voice name you want to assign to the Grou0. Speak clearly into the microphone. 4Press - under Save.add walkie-talkie numbersYou can add Walkie-Talkie numbers to a Group by selecting them from Contacts, the recent calls list, or memo. You can add all members in an existing Group by selecting the list. You can select more than one member from Contacts and the recent calls list. A checkmark appears next to each selected item.Tip: To deselect a selected item, highlight it and press O. You can also enter Walkie-Talkie numbers from the keypad. add members from Contacts, the recent calls list, or Memo1While creating a SDG list, select [Add Member] or select [Add Number] and press - under Browse.Tip: To move between Contacts, the recent calls list, and Memo, scroll left or right. 2Scroll to the members you want from Contacts, the recent calls list, or Memo, and press O. A checkmark appears next to each selected member. Tip: To deselect a selected member, highlight it and press O.3Press - under Done.add members manually from the keypad1While creating a Grou[, select [Add Number].First Draft 6-15-07
57calls2Enter the Walkie-Talkie number using the keypad.remove members or Groupsremove a member from a Group1From Contacts, scroll to the Group you want to delete the member from.2Press - under Edit.3Scroll to the member you want to remove. 4Press - > Remove Member.5Press - under Save.remove all members from a Group1From Contacts, scroll to the Group you want to delete the member from.2Press - under Edit.3Press M > Remove All Members.4Press - under Yes to confirm.delete a Group from Contacts1Scroll to the Group you want to delete.2Press M > Delete Group.make Group walkie-talkie calls1From Contacts or the recent calls list, scroll to or select the Group you want. orPress and hold s until a prompt appears telling you to say the voice name. Say the voice name assigned to the Group you want. orFrom the idle screen, press the number on your keypad for the shortcut you assigned to the Group you want.orEnter or select a Walkie-Talkie numbers and add more Walkie-Talkie numbers. First Draft 6-15-07
58calls“start a Group walkie-talkie call with a walkie-talkie number” below.2Push the Walkie-Talkie button.start a Group walkie-talkie call with a walkie-talkie numberYou can start a Group Walkie-Talkie call with any Walkie-Talkie number you want to call.Note: Choose the first Walkie-Talkie number that you want in the Group Walkie-Talkie call:1From the idle screen, enter the Walkie-Talkie number.orFrom the Contacts list, scroll to an entry containing the Walkie-Talkie number.orFrom recent calls list, scroll to an entry containing the Walkie-Talkie number.2Press M > Call New Group.3Add more Walkie-Talkie numbers. See “add walkie-talkie numbers” on page 56.If you want to save the Group you have created press M > Store Group.orIf you do not want to save the Group, press - under Done.4Push the Walkie-Talkie button to make the call. Group call informationWhile you are in a Group call, the following appears on the screen:•The name of the Group•The name or the Walkie-Talkie number of the person speakingFirst Draft 6-15-07
59calls•The number of participants in the Group Walkie-Talkie callGroup walkie-talkie call detailsDuring a Group Walkie-Talkie call, you can view details about the other Group members, such as their name or Walkie-Talkie number, and their status on the call. To view Group Walkie-Talkie call details, press - under Details.In the Group Call Details view, these icons appear next to member names or Walkie-Talkie numbers:TThe member of the Group who is speaking.AA member of the Group who is active on the Group Walkie-Talkie call, but not speaking.OA member of the Group who has exited the call.UA member of the Group who could not be reached on the Group Walkie-Talkie call.uA member of the Group whose status is unknown.First Draft 6-15-07
60customizecustomizering tonesTo set the ring tone your phone makes when you receive phone calls, call alerts, message notifications, pictures sent using Send via PTT or Datebook reminders:Note: Only ring tones stored in your phone’s memory are available in the ring tones list. Not all audio files can be assigned as ring tones.Find it: M > Ring Tones1Make sure Vibrate All is set to Off.2Scroll through the list of ring tones and select the one you want to assign. Vibrate sets your phone to vibrate instead of making a sound; Silent sets your phone to neither vibrate nor make a sound.Tip: Highlighting a ring tone lets you hear it.3Select the features you want to assign the ring tone to.4When you are finished, press Done.Note: This icon M appears on the display if you set your phone to neither vibrate nor make a sound for phone calls.set your phone to vibrateYou can set your phone to vibrate instead of making a sound when you receive all phone calls, Walkie-Talkie calls, group calls, call First Draft 6-15-07
61customizealerts, messages notifications, pictures sent using Send via PTT, and Datebook reminders.Find it: M > Ring Tones > Vibrate All1Set this option to On or Locked.Setting this option to On lets you turn Vibrate All off by pressing the up volume control. Setting this option to Locked requires you to press and hold the up volume control to turn Vibrate All off. The Locked option helps prevent you from accidentally turning Vibrate All off.To se t Vibrate All to On or Locked using the volume controls: Press the volume controls to turn down the volume as far as possible to set Vibrate All to On. Continue to hold the down volume control to set Vibrate All to Locked.To set your phone to vibrate instead of making a sound for some features but not others:Find it: M > Ring Tones1Make sure Vibrate All is set to Off.2Select Vibrate from the list of ring tones.3Select the features you want to set to make no sound.4When you are finished, press - under Done.wallpaperSet a photo or picture as a wallpaper (background) image in your phone’s home screen or throughout all menu screens.Find it: M > Settings > Display/Info > WallpaperTo select a wallpaper image scroll through the list of pictures and press O to select the picture of your choice.Note: You can set the wallpaper to change automatically after a certain period of time by First Draft 6-15-07
62customizeturning on the Auto Cycle feature located in the Wallpaper menu.backlightSet the amount of time that the display and java apps. backlights remain on, or turn off the backlight feature to extend battery life.Find it: M > Settings > Display/Info > BacklightdatebookFind it: M > Datebook > M > SetupYou can view or change these options:Start View — Sets Datebook to start in day view, week view, or month view when you access Datebook.Daily Begin — Sets the beginning of your day. This is the earliest time of day displayed in week view, if you have a 12-hour day view.Delete After — Sets the amount of time Datebook waits to delete an event after it occurs.Time Shift — Lets you shift the times of all Datebook events. This is useful if you are traveling to a different time zone.Alert Timeout — Sets the amount of time a tone continues to sound when you receive a Datebook reminder.Clock — Controls whether the time and date appear on the home screen; sets time and date format.hide or show location informationYour phone is equipped with a Location feature for use in connection with location-based services that may be available in the future. First Draft 6-15-07
63customizeThe Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except for your local emergency response center.Note: Turning Location on will allow the network to detect your position using GPS technology, making some applications and services easier to use. Turning Location off will disable the GPS location function for all purposes except 911, but will not hide your general location based on the cell site serving your call. No application or service may use your location without your request or permission. GPS-enhanced 911 is not available in all areas.set your privacy options:Find it: M > GPS > PrivacySelect Restricted, Unrestricted, or Ask Access.First Draft 6-15-07
64other features—advanced callingother featuresadvanced callingfeaturecall waitingFind it: To accept the second call and put the active call on hold press - under Yes.To accept the second call and end the active call press S.Your phone rings with the second call for you to answer.3-way callMake or receive a phone call and press M > 3 Way. Enter the second phone number, press N and - under Join.Tip: For quick ways to enter the number, press M to see the dialing menu.You cannot make any other calls after you have joined a 3-way call, even if one party disconnects.featureFirst Draft 6-15-07
65other features—contactscontacts datebookfeatureedit/delete contact entryPress - under Contacts. Select a contact and press M > Edit. Change the desired content and press - under Done.set ringer IDPress - under Contacts. Select a contact and press M > Edit > Ringer. Select desired ringer, press - under Back, and - under Done.featurecreate datebook eventsTo create a new Datebook event press M > D > [New Event].see datebook eventTo see a calendar event press M > D > left or right to see the day and up or down to see the events.event reminderWhen an event reminder occurs press - under View.Press - under Back to close the reminder.First Draft 6-15-07
66other features—GPSGPSTo improve GPS performance:•Stay in the open,•Move away from other electrical or electronic devices•Try to remain stationary.receive datebook events via PTTTo view the information while still in the Walkie-Talkie call press O.The 5 most recent events received from a Walkie-Talkie number are stored with the that Walkie-Talkie number on the recent calls list.To store events to the Datebook press - under Save while viewing the event you want to store.featurefeaturemake an emergency callDial your local emergency number to be connected to an emergency response center. If you are on an active call, you must end it before making an emergency call.First Draft 6-15-07
67other features—GPSview approximate locationTo see where you currently are press M > GPS > Position.Scroll to view the entire screen.To recalculate position press Rfrsh. This may take several minutes.set GPS privacy optionsTo set the level of privacy for your GPS system press M > GPS > Privacy.If your GPS PIN security feature is enabled, enter your GPS PIN and select the privacy option you want.featureset GPS PIN securityPress M > Settings > Security > GPS PIN > On or Off > Enter the current GPS PIN.Note: Your default GPS PIN is 0000. To change your GPS PIN press M > Settings > Security > Change Passwds > GPS PIN.Enter the current GPS PIN and enter the new 4- to 8-digit GPS PIN. Re-enter the new 4- to 8-digit GPS PIN to confirm.featureFirst Draft 6-15-07
68other features—handsfreehandsfreeNote: The use of wireless phones while driving may cause distraction. Discontinue a call if you can't concentrate on driving. Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these productsSMS messagesfeaturespeaker-phoneTo activate the speakerphone while driving press and hold the speakerphone key s.auto answerTo automatically answer calls when connected to a car kit or headset press M > Settings > Phone Calls > Auto Ans. Select the amount of rings before answering.featureread messagesWhen you receive an SMS message, it will automatically appear on your phone's main display screen. To view the entire message press down. If the messages is urgent, the message icon blinks in your display.reply to messagesWhile the message is open press - under Reply. Type the message and press - under Send.orPress - under Reply > [Create Reply] or select a quick reply from the list and press - under Send.First Draft 6-15-07
69other features—personalizepersonalizefeaturelanguageTo set the language of your menu press M > Settings > Display/Info > Language.backlight time lengthTo select how long the display screen and keypad are backlit press M > Settings > Display/Info > Backlight.menu styleTo show the Main Menu as graphic icons or a text-based list press M > Settings > Display/Info > Menu View.clock displayTo display the clock on your idle screen press M > Settings > Display/Info > Clock > Display > On.First Draft 6-15-07
70other features—personalizeFirst Draft 6-15-07
71Important Safety andLegal InformationFirst Draft 6-15-07
72Safety InformationSafety and General InformationSafety InformationThis section contains important information on the safe and efficient operation of your mobile device. Read this information before using your integrated multi-service portable radio.*Exposure to Radio Frequency (RF) EnergyYour phone contains a transmiter and receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits.Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.Portable Radio Product Operation and EME ExposureYour Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME):•United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J.•American National Standards Institute (ANSI) / Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1992.•Institute of Electrical and Electronics Engineers (IEEE). C95. 1-2005 Edition.*•International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998.•Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999.•Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2003.•ANATEL, Brasil Regulatory Authority, Resolution 303 (July 2, 2002) "Regulation of the limitation of exposure to * The information provided in this document superseedes the general safety information in user’s guides published prior to May 1, 2006First Draft 6-15-07
Safety Information73electrical, magnetic, and electromagnetic fields in the radio frequency range between 9 kHz and 300 GHz." "Attachment to Resolution 303 from July 2, 2002." Operational PrecautionsTo assure optimal radio product performance and to be sure that human exposure to RF does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions :Two-way radio operationYour radio product has been designed and tested to comply with national and international standards and guidelines regarding human exposure to RF electromagnetic energy, when operated in the two-way mode (at the face, or at the abdomen when using an audio accessory) at usage factors of up to 50% talk/50% listen.Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the PTT button. To receive calls, release the PTT button. Transmitting 50% of the time or less, is important because this radio generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.Product OperationWhen placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone.If you wear a radio product on your body when transmitting, always place the radio product in a Motorola approved clip, holder, holster, case or body harness. If you do not use a body-worn accessory supplied or approved by Motorola and are not using the radio product in the intended use positions along side the head in the phone mode or in front of the face in the two-way radio mode—or if you hang your device from a lanyard around your neck—keep the device at least 2.5 centimeters (1 inch) from your body when transmitting.First Draft 6-15-07
74Safety InformationALL MODELS WITH FCC ID IHDT56HG2 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.1 Tests for SAR are conducted using standard operating positions reviewed by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.Before a phone model is available for sale to the public, it must be tested and certified to the FCC that is does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.53 W/kg and when tested on the body, as described in this user guide, is 1.55 W/kg during packet data transmission. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.)2 While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID IHDT56HG2.Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com.1 In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety First Draft 6-15-07
Safety Information75to give additional protection for the public and to account for any variations in measurements.2 The SAR information reported to the FCC includes the FCC-accepted Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.Approved AccessoriesFor a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.motorola.com/iden.RF Energy Interference/CompatibilityNearly every electronic device is subject to RF energy interference from external sources if inadequately shielded, designed or otherwise configured for RF energy compatibility. In some circumstances your handset may cause interference with other devices.Follow Instructions to Avoid Interference ProblemsTurn OFF your radio product where posted notices instruct you to do so.In an aricraft, turn off your radio product whenever instructed to do so by airline staff. If your radio product offers an airplane mode or similar feature, consult airline staff about using it in flight.Implantable Medical DevicesIf you have an implantable medical devices, such as a pacemaker or defibrillator, consult your physician before using this radio product.Persons with implantable medical devices should observe the following precautions:•ALWAYS keep the phone more than 20 centimeters (8 inches) from the the implantable medical device when the phone is turned ON.•DO NOT carry the phone in a breast pocket;•Use the ear opposite the implantable medical device to minimize the potential for interference.•Turn OFF the phone inmediately if you have any reason to suspect that the interference is taking place.Read and follow the directions from the manufacturer of your implantable medical device. If you have any questions about using your wireless phone with your implantable medical device, consult your health care provider.Hearing AidsSome mobile devices may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer or physician to discuss alternatives.First Draft 6-15-07
76Safety InformationOther Medical Devices and Health Care FacilitiesIf you use any other personal medical devices, consult your physician or the manufacturer or your device to determine if it is adequately shielded from RF energy. Turn off your radio product when instructed to do so in hospitals or health care facilities that may be using equipment that is sensitive to external RF energy.Driving PrecautionsCheck the laws and regulations on the use of radio products in the area where you drive. Always obey them.When using your radio product while driving, please:•Give full attention to driving and to the road. Using a mobile device may be distracting. Discontinue a call if you can’t concentrate on driving.•Use handsfree operation, if available.•Pull off the road and park before making or answering a call if driving conditions so require.•Do not place a handset in the airbag deployment area.Responsible driving practices can be found in the “Smart Practices While Driving” section at the end of this guide and/or at the Motorola Web site: www.motorola.com/callsmart.Note: The use of wireless phones while driving may cause distraction. Discontinue a call if you can’t concentrate on driving. Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.Operational WarningsObey all posted signs when using mobile devices in public areas.Potentially Explosive AtmospheresAreas with potentially explosive atmospheres are often but not always posted, and can include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air contains chemicals or particles, such as grain, dust or metal powders.When you are in such area, turn off your hanset, and do not remove, install, or charge batteries unless it is a radio product type especially qualified for use in such areas as “Intrinsically Safe” (for example, Factory Mutual, CSA, or UL approved). In such areas, sparks can occur and cause an explosion or fire.Batteries and ChargersCaution: Improper treatment or use of batteries may present a danger of fire, explosion, leakage, or other hazard. For more information, see the “Battery Use and Battery Safety” section in this user’s guide.First Draft 6-15-07
Safety Information77Your battery, charger, or portable radio may contain symbols, defined as follows:Choking HazardsYour portable radio or its accessories may include detachable parts, which may present a choking hazard to small children. Keep your device and its accessories away from small children.Glass PartsSome parts of your mobile device may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your mobile device until the glass is replaced by a qualified service center.Seizures/BlackoutsSome people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when playing video games. These may occur even if a person has never had a previous seizure or blackout.If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult with your Symbol DefinitionImportant safety information follows.Do not dispose of your battery or mobile device in a fire.Your battery or mobile device may require recycling in accordance with local laws. Contact your local regulatory authorities for more information.Do not throw your battery or mobile device in the trash.Your mobile device contains an internal lithium ion battery.Do not let your battery, charger, or mobile device get wet.032374o032376o032375o032378oLi Ion BATTListening at full volume to music or voice through a headset may damage your hearing.Symbol DefinitionFirst Draft 6-15-07
78Safety Informationphysician before playing video games or enabling a flashing-lights feature (if available) on your mobile device.Discontinue use and consult a physician if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the lights on in the room, take a 15-minute break every hour, and stop use if you are very tired.Caution About High Volume UsageListening at full volume to music or voice through a headset may damage your hearing.Repetitive MotionWhen you repetitively perform actions such as pressing keys or entering finger-written characters, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. If you continue to have discomfort during or after such use, stop use and see a physician.Service & RepairsIf you have questions or need assistance, we’re here to help.Go to www.motorola.com/iden, where you can select from a number of customer care options. You can also contact the Motorola Customer Support Center at 1-800-453-0920 (United States), 1-877-483-2840 (TTY/TDD United States for hearing impaired).First Draft 6-15-07
Safety Information79Limited Warranty Motorola Communications Products (International)Note: This Warranty applies in Singapore and the Philippines.What Does this Warranty Cover?MOTOROLA warrants the MOTOROLA manufactured iDEN Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below: Rechargeable Batteries will be replaced during the applicable warranty period if:•the battery capacity falls below 80% of rated capacity, or•the battery develops leakage.MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or Products Covered Length of CoverageiDEN Suscriber Digital Mobile and Portable UnitsOne (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.Product Accesories (manufactured by or under license from MOTOROLA).One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.Batteries. One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.Products Covered Length of CoverageFirst Draft 6-15-07
80Safety Informationtransferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole, or any portion of the system not produced by MOTOROLA, under this warranty.General Provisions:This warranty sets forth the full extent of MOTOROLA’S responsibilities regarding the Product, Repair, replacement or refund of the purchase price, at MOTOROLA’S options, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.How to Get Warranty Service:You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service.What This Warranty Does Not Cover:•Defects or damage resulting from use of the Product in other than its normal and customary manner.•Defects or damage from misuse, accident, water, or neglect.•Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.First Draft 6-15-07
Safety Information81•Breakage or damage to antennas unless caused directly by defects in material workmanship.•A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the audition to the Product of non-MOTOROLA supplied equipment).•Product which has had the serial number removed or made illegible.•Rechargeable batteries if:Any of the seals on the battery enclosure of cells are broken or show evidence of tampering.The damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.•Freight costs to the repair depot.•A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLA’S published specifications or the local type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.•Scratches or other cosmetic damage to Product surfaces that does not effect the operation of the Product.•Normal and customary wear and tear.•Exclusion for defects or damage arising from use of the products in connection with non-MOTOROLA equipment.Patent and Software Provisions:MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:•That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;•That MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and•Should the Product or parts become, or in MOTOROLA’S opinion be likely to become, the subject of a claim of infringement of a patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.First Draft 6-15-07
82Safety InformationMOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or sued in connection with the Product or any parts thereof. In no event shall MOTOROLA be liable for any incidental, special or consequential damages arising from any claim of patent infringement or alleged infringement.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.First Draft 6-15-07
Safety Information83Hearing Aid CompatibilityA number of Motorola phones have been tested for hearing aid compatibility. When some wireless phones are used with certain hearing aids, users may detect a noise which can interfere with the effectiveness of the hearing aid. Some hearing aids are more “immune” than others to this interference noise, and phones can also vary in the amount of interference noise they may generate. ANSI standard C63.19 was developed to provide a standardized means of measuring both mobile phone and hearing aids to determine usability rating categories for both. Ratings have been developed for mobile phones to assist hearing aid users find phones that may be compatible with their hearing aid. Not all phones have been rated for compatibility with hearing aids. Phones that have been rated have a label with the rating(s) located on the box, and at www.motorola.com/accessibility.These ratings are not guarantees of compatibility. Results will vary depending on the user's hearing aid and individual type and degree of hearing loss. If a hearing aid is particularly vulnerable to interference, even a phone with a higher rating may still cause unacceptable noise levels in the hearing aid Trying out the phone with your hearing aid is the best way to evaluate it for your personal needs.“M” Rating: Phones rated M3 or M4 meet FCC requirements for hearing aid compatibility and are likely to generate less interference to hearing aids than unrated phones. (M4 is the “better” or higher of the two ratings.) On those models with an extendable antenna, this rating is determined only with the antenna extended.“T” Rating: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing aid's telecoil (“T Switch” or “Telephone Switch”) than unrated phones. (T4 is the “better” or higher of the two ratings.) On those models with a telecoil mode setting, this rating is determined only with the phone so set. For setting instructions, see “Features for the Hearing Impaired” in the section entitled “Advanced Calling Features”. Note that not all hearing aids have telecoils in them.Hearing aids may also be measured for immunity to interference from wireless phones and may have ratings similar to wireless phones. Ask your hearing healthcare professional for the rating of your hearing aid. Add the rating of your hearing aid and your phone to determine the estimated usability: •Any combined rating equal to or greater than six offers excellent use.•Any combined rating equal to five is considered normal use.First Draft 6-15-07
84Safety Information•Any combined rating equal to four is considered usable.Thus, if you use an M3 phone with a M3 hearing aid you will have a combined rating of six for “excellent use.” This methodology applies equally for T ratings.More information about hearing aid compatibility may be found at: www.motorola.com/accessibility, www.fcc.gov, www.fda.gov, and www.hearingloss.org/learn/cellphonetech.aspFirst Draft 6-15-07
WHO Information85Information From the World Health OrganizationWHO InformationPresent scientific information does not indicate the need for any special precautions for the use of mobile phones. If you are concerned, you may want to limit your own or your children’s RF exposure by limiting the length of calls or by using hands-free devices to keep mobile phones away from your head and body.Source: WHO Fact Sheet 193Further information: http://www.who.int./peh-emfProduct RegistrationRegistrationOnline Product Registration:http://direct.motorola.com/hellomoto/ Motosupport/source/registration.aspProduct registration is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty service, and permits us to contact you should your product require an update or other service. Registration is for U.S. residents only and is not required for warranty coverage.Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications Product you will need to provide a copy of your dated sales receipt to confirm warranty status.Thank you for choosing a Motorola product.First Draft 6-15-07
86Export LawExport Law AssurancesExport LawThis product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade.Wireless: The New RecyclableRecyclingYour wireless mobile device can be recycled. Recycling your mobile device reduces the amount of waste disposed in landfills and allows recycled materials to be incorporated into new products.The Cellular Telecommunications Industry Association (CTIA) and its members encourage consumers to recycle their mobile devices and have taken steps to promote the collection and environmentally sound recycling of end-of-life devices.As a mobile device user, you have an important role in ensuring that this device is recycled properly. When it comes time to give this mobile device up or trade it in for a new one, please remember that the mobile device, the charger, and many of its accessories can be recycled. It's easy. To learn more about CTIA's Recycling Program for Used Wireless Devices, please visit us at: http://recycling.motorola.young-america.com/ index.htmlFirst Draft 6-15-07
Perchlorate Label87California Perchlorate LabelPerchlorate LabelSome mobile phones use an internal, permanent backup battery on the printed circuit board that may contain very small amounts of perchlorate. In such cases, California law requires the following label:“Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.”There is no special handling required by consumer.First Draft 6-15-07
88Privacy and Data SecurityPrivacy and Data SecurityPrivacy and Data SecurityMotorola understands that privacy and data security are important to everyone. Because some features of your mobile device may affect your privacy or data security, please follow these recommendations to enhance protection of your information:• Monitor access — Keep your mobile device with you and do not leave it where others may have unmonitored access. Lock your device’s keypad where this feature is available.• Keep software up to date — If Motorola or a software/application vendor releases a patch or software fix for your mobile device which updates the device’s security, install it as soon as possible.• Erase before recycling — Delete personal information or data from your mobile device prior to disposing of it or turning it in for recycling. For step-by-step instructions on how to delete all personal information from your device, please contact your local iDEN Customer Service.Note: Note: For information on backing up your mobile device data before erasing it, go to www.motorola.com and then navigate to the “downloads” section of the consumer Web page for “Motorola Backup” or “Motorola Phone Tools.”• Understanding AGPS — In order to comply with emergency caller location requirements of the FCC, certain Motorola mobile devices incorporate Assisted Global Positioning System (AGPS) technology. AGPS technology also can be used in non-emergency applications to track and monitor a user’s location — for example, to provide driving directions. Users who prefer not to permit such tracking and monitoring should avoid using such applications.If you have further questions regarding how use of your mobile device may impact your privacy or data security, please contact Motorola at privacy@motorola.com, or contact your service provider.First Draft 6-15-07
Driving Safety89Smart Practices While DrivingDriving SafetyDrive Safe, Call Smart SMCheck the laws and regulations on the use of mobile devices and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. Go to www.motorola.com/callsmart for more information.Your mobile device lets you communicate by voice and data—almost anywhere, anytime, wherever wireless service is available and safe conditions allow. When driving a car, driving is your first responsibility. If you choose to use your mobile device while driving, remember the following tips:• Get to know your Motorola mobile device and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.• When available, use a hands-free device. If possible, add an additional layer of convenience to your mobile device with one of the many Motorola Original hands-free accessories available today.• Position your mobile device within easy reach. Be able to access your mobile device without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.• Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.• Do not take notes or look up phone numbers while driving. Jotting down a “to do” list or going through your address book takes attention away from your primary responsibility—driving safely.• Dial sensibly and assess the traffic; if possible, place calls when your car is not moving or before pulling into traffic. If you must make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.• Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that can divert your attention away from the road.• Use your mobile device to call for help. Dial 911 or other local emergency number in the case of fire, traffic accident, or medical emergencies.*First Draft 6-15-07
90Driving Safety• Use your mobile device to help others in emergencies. If you see an auto accident, crime in progress, or other serious emergency where lives are in danger, call 911 or other local emergency number, as you would want others to do for you.*• Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.** Wherever wireless phone service is available.First Draft 6-15-07
91IndexIndexAaccessories 9, 68active phone line 44advanced calling 643-way calls 64airplane mode 49alertset 47, 60turn off 47, 50answer a call 15auto replies 35Bbacklight 62, 69battery 10, 12, 13life, extend 10battery indicator 44Bluetoothsetting your phone 42turning on or off 42bluetooth 42Ccallanswer 15end 15make 15caller ID 52calls 50center key 47center select key 9clock 69codes 48combined power/end/home key 14, 15contacts 65Ddatebook 65receive events via PTT 66setup 62dial a phone number 15dialed calls 50display 43Eearpiece volume 47emergency number 52end a call 15export regulations 86First Draft 6-15-07
92IndexFfrequently asked questionsservice and repairs 78GGPS 66GPS enabledemergency calls 53GPS PIN 48GPS, see GPS enabledHhandsfree 68handsfree speaker 47Hearing Aid Compatibility 83home screen 43Iincoming call message 52international calls 53iTAP text entry mode 45Kkeypadlocking 48Llanguage 69lockphone 48low battery message 44Mmake a call 15messages 68MMS 28auto replies 28priority 28Nnavigation key 9, 47Oone touch walkie-talkie 25optional accessory 9, 68optional feature 9Ppacket data 44passwords 48passwords. See codespersonalize 68, 69phonelocking 48phone number 18PT Manager 27Rradio frequency 72received calls 50recent calls 50recycling 86redial 51First Draft 6-15-07
93Indexring style indicator 44ring style, setting 47ring tonesoff 60setting 60vibrate 60, 61ringer volume 47Ssafetyradio frequency 72RF energy interference 75safety information 72safety tips 89security 48security code 48send key 15send via PTT 19SIM card 10SIM PIN 48soft keys 43speaker 44, 66speed dial 54store your number 18Ttap text entry mode 45text entry 44turn on/off 14Uunlockphone 48unlock code 48Vvoice commands 51voice mailreceiving 54setting up 54voicemail 54volume 47Wwalkie-talkie 27walkie-talkie callsanswer 16make 15wallpaper 61WHO information 85Yyour phone number 18First Draft 6-15-07
94IndexFirst Draft 6-15-07
First Draft 6-15-07
www.motorola.comNNTN7280A00000000 XX XX Month/07Printed in USAFirst Draft 6-15-07

Navigation menu