Motorola Mobility T5ZX1 Mobile Cellular Transceiver User Manual Exhibit 8a

Download:
Mirror Download [FCC.gov]
Document ID	84052
Application ID	58oHlLflFeqIe4U8zzPLsA==
Document Description	Motorola updated users manual includes rf exposure responses to 11299
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.69kB (333616 bits)
Date Submitted	2000-01-28 00:00:00
Date Available	2000-03-03 00:00:00
Creation Date	2000-01-28 23:54:53
Producing Software	Acrobat PDFWriter 3.02 for Windows NT
Document Lastmod	2000-01-29 00:04:38
Document Title	Exhibit 8a.PDF
Document Author:	bachaj

APPLICANT: MOTOROLA, INC.
FCC ID: IHDT5ZX1
A draft copy of the latest users manual follows.
Note: RF exposure information is provided on page 7.
EXHIBIT 8b
Table of Contents
Getting Started.....................................................4
Welcome ................................................................4
Safety Information..................................................6
Introduction ..........................................................11
Phone Overview...................................................12
Basic Operation .................................................15
Turn Phone On and Off........................................15
Place a Call..........................................................17
Automatic Redial..................................................18
End a Call ............................................................19
Receive a Call......................................................19
Call in Absence Indicator.....................................19
Signal Strength Meter ..........................................20
Volume Meter.......................................................20
Speaker Volume...................................................21
Earpiece Volume..................................................21
Ringer Volume......................................................22
Display Own Phone Number ...............................22
Switch to Second Phone Number........................22
Place a Hands Free Call......................................24
Receive a Hands Free Call..................................24
Manual Handset to Hands Free Operation ..........25
Automatic Hands Free .........................................25
Hands Free to Handset Operation.......................25
Memory ...............................................................26
Storing Information in Memory ............................26
Storing a Phone Number and a Name ................26
Storing Phone Number Only................................28
Storing Area Code and Prefix (Postscripting)......28
Store to a Location Number.................................29
Memory Autoload.................................................29
Memory Blocks ....................................................30
Table of Contents
Memory Protect ...................................................31
Recalling/Scrolling from Memory.........................31
Recalling/Scrolling by Name................................31
Recalling/Scrolling by Location Number ..............32
Last Number Recall .............................................33
Recalling Last 10 Numbers Dialed ......................33
Recalling an Area Code and Prefix (Postscripting) ..34
Turbo Dial.............................................................34
One Touch Dialing Keys.......................................35
Super Speed Dialing............................................35
Scratch Pad Memory ...........................................36
Tone Dialing (Two-Part Calling) ...........................36
Pause Dialing (Memory Linking)..........................38
Calling Card Dialing .............................................40
One Touch Dialing Keys.......................................45
One Touch Emergency Dialing ............................45
Change Memory Entries - Alpha or Numeric ......46
Clear Memory Entries..........................................47
Features ..............................................................48
Feature Menu ......................................................48
To Select/Cancel Menu Features.........................49
Signal Strength Meter ..........................................49
Feature Status Review.........................................50
Microphone Muting ..............................................50
Auxiliary Alert.......................................................50
Number Preference..............................................52
Automatic Answer ................................................52
Multiple Key Answer.............................................53
Call Receive.........................................................53
Ringer ..................................................................54
Keypad Tones.......................................................54
Scratch Pad Tones ...............................................55
Remind Message.................................................55
Table of Contents
PIN Code Activation.............................................56
Timers ..................................................................57
Individual Call Timer ............................................57
Resettable Call Timer ..........................................58
Cumulative Call Timer..........................................58
Individual Timer....................................................59
One-Minute Timer ................................................59
Security Features.................................................59
Electronic Lock.....................................................60
Change Unlock Code...........................................60
Display Unlock Code............................................60
Automatic Lock ....................................................61
Theft Alarm ..........................................................61
Change Service Level..........................................62
Master Reset .......................................................64
Master Clear ........................................................64
Language Selection .............................................64
Extended Talk ......................................................65
Ringer Style .........................................................65
Reference............................................................66
The Cellular System ............................................66
Service Area ........................................................66
Weak Signal Alert ................................................66
Switchhook and Enhanced System Services ......67
Roaming...............................................................67
Selectable System Registration ..........................68
Troubleshooting....................................................71
Quick Reference Feature Guide ..........................72
Message Glossary ...............................................74
Rules, Regulations, & Precautions ......................76
Index ....................................................................79
Patent Information................................................82
Memory Location Directory..................................83
Getting Started
Welcome
Thank you for selecting Motorola – a world leader
in cellular technology.
All Motorola cellular phones are designed and
manufactured in the United States to meet
Motorola’s exacting specifications and world-class
quality standards. These phones withstand our
rigorous durability tests including temperature,
humidity, shock, dust, vibration, and a drop test.
Product superiority is yours with Motorola.
• For information about your product or accessories
for your product, please call Motorola at:
1-800-331-6456
1-800-461-4575 (Canada)
• For any information about your cellular service,
please call your service provider (Carrier).
Carrier’s Name ________________________
Carrier’s Phone Number _________________
Getting Started
• You will need to have the following information
when you inquire about your phone or service.
Your ESN (electronic serial number) and MSN
(mechanical serial number) are located on the
transceiver of your telephone.
ESN Number_____________________________
MSN Number ____________________________
Model Number ___________________________
Cellular Phone Number ____________________
• Unlock Code — The sequential code of 123 is
the standard unlock code programmed into all
phones by the factory. It is often changed to the
last three digits of your cellular phone number by
the carrier. For easy access to this unlock code in
the future, please list it here now: __ __ __.
(Please contact your place of purchase if your
unlock code has been changed and you do not
have this information.)
Warranty Expiration Date ________________
Date of Purchase ______________________
Getting Started
Safety Information
IMPORTANT: Read this information before
using your wireless mobile phone.
Exposure to Radio Frequency Signals
Your wireless mobile telephone is a low power
radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF)
signals.
International agencies have set standards and
recommendations for the protection of public
exposure to RF electromagnetic energy.
• International Commission on Non-Ionizing
Radiation Protection (ICNIRP)1996
• Verband Deutscher Elektrotechniker (VDE) DIN0848
• United States Federal Commission, Radio
Frequency Exposure Guidelines (1996)
• National Radiological Protection Board of the
United Kingdom, GS 11, 1988
• American National Standards Institute (ANSI)
IEEE. C95. 1-1992
• National Council on Radiation Protection and
Measurements (NCRP). Report 86
• Department of Health and Welfare Canada.
Safety Code 6
These standards are based on extensive scientific
review. For example, over 120 scientists,
engineers, and physicians from universities,
government health agencies, and industry
Getting Started
reviewed the available body of research to
develop the updated ANSI standard.
The design of your phone complies with these
standards when used as described under "Phone
Operation."
IMPORTANT: To maintain compliance with the
FCC's RF exposure guidelines, if you wear a
handset on your body use only the Motorola
supplied carrying case, holster or other
body-worn accessory for this product and ensure
that the antenna is at least 1 inch (2.5
centimeters) from your body when transmitting.
Antenna Care
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may
violate local agency regulations.
Carry Phone Operation
Do not operate your carry phone when a person is
within 4 inches (10 centimeters) of the antenna. A
person or object within 4 inches (10 centimeters)
of the antenna could impair call quality and may
cause the phone to operate at a higher power
level than necessary and expose that person to
RF energy in excess of that established by the
FCC RF Exposure Guidelines.
Mobile Phone Operation
Do not operate your mobile telephone when any
person is within 12 inches (30 centimeters) of its
vehicle-installed antenna.
Getting Started
Driving
Check the laws and regulations on the use of
wireless telephones in the areas where you drive.
Always obey them. Observe the following
guidelines when using your phone while driving.
• Give full attention to driving--driving safely is your
first responsibility.
• Use hands-free phone operation, if available.
• Pull off the road and park before making or
answering a call if driving conditions so require.
Electronic Devices
Most modern electronic equipment is shielded
from RF signals. However, certain equipment may
not be shielded against the RF signals from your
wireless phone.
Pacemakers
The Health Industry Manufacturers Association
recommends that a minimum separation of six
inches (6") be maintained between a wireless
phone's antenna and a pacemaker to avoid
potential interference with the pacemaker. These
recommendations are consistent with the
independent research by and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• should ALWAYS keep the phone more than six
inches from their pacemaker when the phone is
turned ON
• should turn the phone OFF immediately if you
have any reason to suspect that interference is
taking place
Getting Started
Other Medical Devices
If you use any other personal medical device,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist
you in obtaining this information.
Turn your phone OFF in health care facilities when
any regulations posted in these areas instruct you
to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should
also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted
notices so require.
Blasting Areas
To avoid interfering with blasting operations, turn
your phone OFF when in a "blasting area" or in
areas posted: "Turn off two-way radio." Obey all
signs and instructions.
Getting Started
Potentially Explosive Atmospheres
Turn your phone OFF and do not remove your
battery when you are in any area with a potentially
explosive atmosphere. Obey all signs and
instructions. Sparks from your battery in such
areas could cause an explosion or fire resulting in
bodily injury or even death. Areas with a
potentially explosive atmosphere are often but not
always clearly marked. They include, but are not
limited to: fueling areas such as gasoline stations;
below deck on boats; fuel or chemical transfer or
storage facilities; areas where fuel odors are
present (for example, if a gas/propane leak occurs
in a car or home); areas where the air contains
chemicals or particles, such as grain, dust, or
metal powders; and any other area where you
normally would be advised to turn off your vehicle
engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. Do NOT place
objects, including both installed or portable
wireless equipment, in the area over the air bag or
in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the
air bag inflates, serious injury could result.
MOB010699
10
Getting Started
Introduction
The cellular telephone you have selected
represents the state-of-the-art in cellular telephones
today. The listing below shows just a few of the
exceptional features that your telephone provides.
• 14-character alphanumeric color LCD display
• 104 memories, including last number recall and
scratch pad
• Last 10 Number Redial
• Turbo Dialing
• Three One Touch Dial Keys
• Signal Strength Meter
• Auto Answer
• Five Call Timers
• Emergency Dialing
• Menu Mode/Alphanumeric Directory
• Two System Registration
• Multiple Key Answer
To help you become familiar with your telephone’s
features, we will take you through a logical stepby-step learning procedure. The tabs at the edge
of the manual mark the different categories that
the telephone’s operations have been broken into.
Please read the general safety information on
page 6, and the rules, regulations, & precautions
on page 76, before operating the phone.
11
Getting Started
Phone Overview
NOTE The telephone you receive may not look
exactly like the one shown on the facing page. All
features will operate as indicated.
Operating Display and Status Indicators
Provide a visual indication of telephone
numbers and messages associated with
mobile telephone service.
Green Dot – Lights when unit is powered.
In Use – Lights when unit is in use.
No Svc – Lights when the unit is out of
service range of a cellular system. Calls
cannot be placed or received.
Roam – Lights when the unit is within
range of a cellular system other than your
home registered system.
Three One Touch Dial Keys
Allows for direct access to important phone
numbers and carrier network services.
Volume Keys
Adjust earpiece, ringer, and speaker volume.
Also:
≤ scrolls forward.
≥ scrolls backward.
Numeric Keypad
Used to enter call information. Also:
Ï, ⁄ enters feature menu.
≤ or £ scrolls forward.
≥ or • scrolls backward.
12
Getting Started
In Use No Svc Roam
13
Getting Started
Control Keypad
‰
Recalls and displays telephone
numbers stored in memory.
Ç
Clears the last digit entered when
pressed and released. Press and hold
to clear the entire display in the event
of an error (does not affect numbers
stored in memory).
Í
Initiates a call to the entered
telephone number or answers a call.
∏
Controls power to the unit.
Ø
Stores telephone numbers into any of
the memory locations.
´
Terminates a call in progress.
Ï Function Key
Used in combination with other buttons for
specific user-programmed functions (e.g.,
Ï, fi activates lock mode).
14
Basic Operation
Turn Phone On and Off
1. If your ignition is on and your telephone is
off, press ∏.
2. Press ∏ again to turn unit off.
Most users find it convenient to have their mobile
telephone turn on and off in conjunction with the
vehicle ignition switch. If you want your mobile
telephone to operate independently of the ignition
switch, discuss this with your installer.
We recommend that the engine be running when
using your mobile telephone.
Start-up Self Tests
Each time the telephone is turned on, it performs
a series of self tests, sounds a tone, and lights all
display positions and status indicators to check
their operation.
Display Messages
Message
A1
A2
B1
B2
LOCKED
Explanation
•If your phone is programmed for
two cellular systems, one of these
messages will appear in the
display upon power up.
•These are reminders as to which
system and phone number are
currently in use.
•Indicates that the phone has been
locked and cannot send or receive
calls until unlocked. Refer to page
60, Electronic Lock.
15
Basic Operation
Start-up Status Indicators
Indicators
In Use No Svc Roam
In Use No Svc Roam
In Use No Svc Roam
In Use No Svc Roam
16
Explanation
On/Lock Indicator
(green light)
• Lights steadily to indicate the
phone is on and fully
operative
• Lights steadily to indicate the
phone is locked and will not
place calls
In Use Indicator
• Lights steadily while a call is
in progress
No Svc (No Service)
Indicator
• Lights steadily if phone is
beyond range of a cellular
service area
• Calls cannot be placed or
received while lit
Roam Indicator
• If flashing, you are accessing
a service area outside of
your home system
• Steady Illumination Roaming on a home type
system
• Flashing - Roaming on a
non-home type system
Basic Operation
Place a Call
1. With power on, enter the number you wish
to call.
2. Press Í. (You may leave the handset
mounted while dialing.)
The green In Use indicator will illuminate. You will
hear conventional ringing as the call is processed,
followed by the called party answering. Pick up the
handset and bring it up to your ear, or leave the
handset mounted and direct your conversation to
the Hands Free microphone for a hands free call.
If the green In Use indicator is extinguished, your
call has been terminated.
To Correct an Error
To clear the last digit entered, press and quickly
release Ç. To clear the entire entry, press and
hold Ç until the entire entry is erased.
Unsuccessful Call Attempts
If you hear one of the following signals, you have
not successfully completed your call.
17
Basic Operation
Tone
Tone
Description
fast busy
(reorder
signal)
Cellular System Busy
Press Í again before ending the
unsuccessful call attempt to
automatically redial the call (see
Automatic Redial below), or press ´
and dial the call again.
Cellular System Could Not
Complete the Call
You may have tried to place a call
before the green ON/LOCK indicator
was lit to let you know your phone
was fully operative. Either press Í
again before ending the unsuccessful
call attempt to automatically redial the
call (see Automatic Redial below), or
press ´ and dial the call again.
The Called Party’s Line is Busy
System
Busy
alternating
high/low
tone
(intercept)
No Service
busy signal
Automatic Redial
Your telephone includes a convenient feature
designed to make repetitive call attempts
unnecessary when a cellular system is busy.
If you receive an alternating high/low signal
(intercept), or the fast busy tone (reorder signal),
followed by System Busy in the display when
attempting to place a call and wish to retry the
call, press Í before ending the unsuccessful call
attempt. Redial is then displayed.
Your telephone will make the call attempt
continuously over the next four minutes. If four
minutes is insufficient time, press Í to begin
another cycle. You may terminate Automatic
18
Basic Operation
Redial by turning off the phone or ignition, or by
pressing ´.
NOTE Automatic Redial applies when the system
is busy, and will not engage when the called
party’s line is busy.
End a Call
Press ´ or return the handset to its mount.
The green In Use indicator will extinguish. If you
have activated the Automatic Hands Free feature,
you must press ´ to terminate the call. You may
terminate a call or procedure (except Master
Reset and Clear) at any time by pressing ´.
Receive a Call
Press Í upon hearing the ring, or lift the
handset to your ear.
Power must be on to receive calls.
Call in Absence Indicator
If your phone is on and an incoming call is
unanswered, Call is displayed. You must press
Ç or ´ to cancel the message and clear the
display.
If you wish to receive the Call message while you
are away from your vehicle, turn your phone on.
When you return to your vehicle, press any key
except Ç, ´, or ∏ to check for incoming calls.
19
Basic Operation
Signal Strength Meter
The Signal Strength Meter (SSM) represents the
relative strength of the signal received by your
phone. The SSM is displayed as a bar graph
following the letter S at the left side of the display.
The S alone represents the lowest strength with
each additional bar representing a stronger signal.
WEAK SIGNAL
S––==≠≠
STRONG SIGNAL
The SSM appears every time you turn your phone
on, unless this feature is turned off through the
feature menu (refer to pg. 48).
To best utilize the SSM, you should familiarize
yourself with the relative signal strength levels and
their associated call placement and call-inprogress qualities.
To deactivate the SSM, see pg. 49.
Any messages, such as LOCKED, which display as
a result of activation of a feature will take priority
over the SSM. You will not see the SSM displayed
in these cases.
Volume Meter
The Volume Meter represents the current volume
setting and will display whenever you adjust the
volume control. The volume level is displayed as a
bar graph following the letter V at the left side of
the display, with each additional bar representing
a higher volume setting.
20
Basic Operation
v––==≠≠
LOWEST
VOLUME SETTING
HIGHEST
VOLUME SETTING
The number of bars represents the number of
volume steps for speaker, earpiece, and ringer
volume. The volume levels can be adjusted by the
use of ≤ and ≥.
Speaker Volume
1. With the handset mounted, press and hold
≤. This will raise the volume.
2. To lower the volume, press and hold ≥.
The number of bars on the Volume Meter
will decrease.
The maximum number of bars that will appear on
the display is six bars.
v––==≠≠
Earpiece Volume
Lift the handset and use ≤ and ≥ as
described above.
The maximum number of bars that will appear on
the display is five bars.
v––==≠
21
Basic Operation
Ringer Volume
Press Ï and use ≤ and ≥ as
described above.
The maximum number of bars that will appear on
the display is six bars.
v––==≠≠
Display Own Phone Number
1. Press ‰, £.
2. The phone number that is currently active
will be displayed.
3. When you have finished viewing, press Ç.
Switch to Second Phone Number
1. Press ‰, £, Ø.
2. The display will go blank to confirm the switch
and the newly activated number will appear.
3. When you have finished viewing, press Ç.
Your telephone can operate over two different
home systems, if you have made proper
arrangements with your Cellular System Operator.
Both are designated as your ‘home system’ but
are accessed with separate telephone numbers.
While you may switch from one system to the
other, only one of the two can be active at any
given time. Calls are placed and received through
the active system only.
If you have two phone numbers programmed into
your phone, each time the telephone is turned on,
22
Basic Operation
it displays a message indicating which home
system type and phone number is currently active.
The message shows the system type and phone
number applied, as follows:
System Type and
Phone Number
Display
Non-wireline or A type
with phone number 1
A1
Non-wireline or A type
with phone number 2
A2
Wireline or B type with
phone number 1
B1
Wireline or B type with
phone number 2
B2
If a call is placed to the inactive phone number,
the caller will receive the recorded ‘Not In Service’
message.
When you turn your phone on, the telephone will
remember which system was active when you
turned it off. That system will stay active until you
change to the other system with the sequence ‰,
£, Ø. You cannot switch systems during a call.
If you enter the sequence during a call, the phone
will wait until the call is terminated and the In Use
indicator is extinguished before switching systems.
Each system (and phone number) has its own
Selectable System Registration state that you may
program (see page 68). That is, you can select
Home Only for system 1 (and phone number 1) and
23
Basic Operation
Standard Mode for system 2 (and phone number
2). Whenever you switch back to System 1, your
telephone will operate in Home Only mode again.
The Roam indicator will operate based on the
active system (see page 67 for detailed information
on Roaming). For example, if your active system
is A1 and you are roaming on a wireline (B)
system, the Roam indicator will flash rapidly.
Each system (and phone number) has its own
cumulative and resettable call timers. You can
only display the call timers of the active system
(and phone number).
Place a Hands Free Call
1. Leaving the handset mounted, dial the
number you wish to call.
2. Press Í.
3. When the called party answers, direct your
conversation to the Hands Free microphone
typically mounted on your vehicle’s sun
visor. The In Use indicator will remain on and
HF will display for the duration of the call.
4. Press ´ to terminate the call.
Receive a Hands Free Call
1. Press Í.
2. Direct your conversation to the Hands Free
microphone. The In Use indicator will remain
on and HF will display for the duration of the
call.
3. Press ´ to terminate the call.
24
Basic Operation
Manual Handset to
Hands Free Operation
1. If you are using the handset and want to
switch to Hands Free operation, press Ï, fl.
2. Mute will display. Note that M for Mute
appears on fl.
3. Return the handset to its mount.
4. Press Ï, fl again and HF will display.
5. Direct your conversation to the Hands Free
microphone.
Automatic Hands Free
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≥ or ≤
(• or £) until –HANG UP FOR HF displays.
3. Press Ç once to toggle this feature on (ø),
and again to toggle it off (–).
4. To exit the feature menu, press ´.
This feature allows you to automatically go to
Hands Free operation without pressing Ï, fl.
NOTE You must first activate the Automatic Hands
Free feature through the feature menu on page
48.
To go from handset to Hands Free operation, hang
up the handset and begin speaking. To go from
Hands Free to handset operation, lift the handset.
Hands Free to Handset Operation
Lift the handset while in a call.
25
Memory
Storing Information in Memory
Your telephone provides memory capable of
storing up to 99 frequently called phone numbers
as well as a fourteen-character name tag. Upon
entering a phone number in memory, the phone
will prompt you to store an associated alphabetic
name. If you are not interested in creating a name
tag for the selected location, alpha entry may be
bypassed and just the phone number would be
stored. (Refer to page 28 for details.)
Before setting up your memory, we suggest you
read the rest of this section to become familiar
with the ways in which you will access and use it.
Storing a Phone Number and a Name
1. Enter phone number to be stored (up to 32
digits).
2. Press Ø.
3. Enter two-digit location number or press •
for Autoload.
4. The phone will then automatically prompt
for alphabetic name input. The Alpha Entry
Mode display will flash ALPHA or sto.
5. Utilize the alphanumeric keypad to enter
each letter as described below (up to 14
letters). £ advances to the next position.
• backspaces, if necessary. Repeat until
name tag is complete. If you do not want to
store a name tag, continue with Step 6.
6. Press Ø.
7. Phone will confirm storage by displaying
memory location number.
26
Memory
Details on Utilizing Alpha Entry Mode
Once in Alpha Entry Mode, you can enter letters
using your numeric keypad. For example, ‘A’ is at
the first press of ¤, ‘B’ is at the second press of
¤, and ‘C’ is at the third press of ¤.
Key
¤
‹
›
fi
fl
‡
°
·
1st
Press
2nd
Press
3rd
Press
4th
Press
EXAMPLE To enter ‘Bob’ and his phone number
555-1234 into memory location 01:
1. Enter phone number by pressing fi, fi, fi,
⁄, ¤, ‹, ›.
2. Press Ø, ‚, ⁄. The display will flash
ALPHA or sto.
3. Press ¤ twice to select ‘B’. Press £ to
advance to the next position. Press fl three
times for ‘O’. Press £. Press ¤ twice more to
select the second ‘B’.
4. Press Ø. The display will flash 01 to confirm
that the name and phone number were
successfully stored in memory location 01.
27
Memory
NOTE If Full displays, refer to Memory Protect
on page 31.
Storing Phone Number Only
1. Enter the phone number you wish to store,
up to 32 digits.
2. Press Ø.
3. Enter two-digit location number or press •
for Autoload.
4. The phone is automatically in Alpha Entry
Mode. The display will flash ALPHA or sto.
Press Ø to bypass.
5. Phone will confirm storage by displaying
memory location number.
NOTE If Full displays, refer to Memory Protect
on page 31.
Storing Area Code and Prefix
(Postscripting)
1. Enter area code and prefix to be stored.
2. Press Ø.
3. Enter two-digit location number or press •
for Autoload.
4. The phone is automatically in Alpha Entry
Mode. The display will flash ALPHA or sto.
Enter a name or press Ø to bypass.
5. Phone will confirm storage by displaying
memory location number.
NOTE If Full displays, refer to Memory Protect
on page 31.
Storing an area code and prefix for a frequently
called location such as an office, offers a
28
Memory
convenient means of postscripting the four-digit
extension of the party you wish to call. To place a
call from this type of memory location, simply
recall the location and enter the four-digit
extension before pressing Í.
There are three ways to select a memory location.
You can select a specific location number; you can
choose to autoload which will store the information
in the next sequentially available location; or you
can arrange the directory into blocks.
Store to a Location Number
1. Enter phone number to be stored.
2. Press Ø.
3. Enter the two-digit location number in which
you wish to place the entry.
4. The phone is automatically in Alpha Entry
Mode. Enter a name or continue to step 5.
5. Press Ø.
6. Phone will confirm storage by displaying
memory location number.
NOTE If Full displays, refer to Memory Protect
on page 31.
Memory Autoload
1. Enter phone number to be stored.
2. Press Ø, •.
3. The phone is automatically in Alpha Entry
Mode. Enter a name or continue to step 4.
4. Press Ø.
5. Phone will confirm storage by displaying
the autoload memory location number.
29
Memory
NOTE If Full displays, refer to Memory Protect
on page 31.
This procedure automatically stores memory
entries into the next available memory location.
This method serves particularly well if you do not
remember the next available memory location.
Memory Blocks
1. Enter phone number to be stored.
2. Press Ø.
3. Enter the first digit of the desired block –
‚, ⁄, ¤, etc.
4. Press •.
5. The phone is automatically in Alpha Entry
Mode. Enter a name or continue to step 6.
6. Press Ø.
7. Phone will confirm storage by displaying
memory location number.
NOTE If Full displays, refer to Memory Protect
on page 31.
The directory can be arranged by location number
in blocks of ten (0-9, 10-19, 20-29, etc.).
Organizing your directory in this manner greatly
speeds review or recall of entries that share a
commonality: e.g., business associates, friends,
emergency numbers, etc. You will still be able to
recall your entries alphabetically.
To take advantage of memory blocks, store
entries into the next free location within a block of
ten numbers (0-9, 10-19, 20-29, etc.).
30
Memory
Memory Protect
The directory has an automatic memory protect
feature which prevents the accidental overwriting and
loss of previously stored names and numbers in
memory. If you attempt to store a number or name
in a location that already contains an entry, the
phone will display FULL and the name/number in
that memory location. The display will then show
the previously stored number and alternate between
the name stored and CHANGE?.
If you wish to save to that location, thus overwriting
and erasing the old information, press Ø.
If you wish to store the entry in an alternate
location, press ´, Ø and the alternate location
number. Memory autoload or memory blocks may
also be used in this case (see pages 29 and 30).
Recalling/Scrolling from Memory
Information stored in memory can be recalled or
reviewed by location number. You may also scroll
the memory during a call. Pressing ´ once in
this case will cancel scrolling, but not the call.
Recalling/Scrolling by Name
1. Press Ï, ‹.
2. Continually press £ or ≤ to scroll in
alphabetical order until the desired name
displays.
3. Press Í to place a call to the number
displayed.
31
Memory
Use ≤ and ≥ (• and £) to scroll forward
and backward.
To begin scrolling from a specific letter of the
alphabet, press Ï, ‹, then the letter from which
you wish to start. If no entries are stored under
this letter, the unit automatically searches forward,
alphabetically, until the next name is found.
To view the associated phone number
1. Press ‰. The display will flash the location
number, then the phone number.
2. Press ‰ again to view the name. If you
have the Name Preferred feature selected,
the phone will first show the alpha entry
when you recall by the memory location. To
view the location and phone number press
‰.
Recalling/Scrolling by
Location Number
1. Press ‰.
2. Enter the desired two-digit location number.
or
Press ‚, ⁄ and press £ or ≤ to begin
scrolling from the beginning of the stored
locations.
3. The display will show the location number,
then the first 10 digits of the number, or if
no number was entered, up to 14 characters
of the name will display.
4. Press Í to place a call to the number
displayed.
32
Memory
Use ≤ and ≥ (• and £) to scroll forward
and backward.
To scroll from a specific two-digit location, press
‰, then the location number where you wish to
begin scrolling.
The phone will display an apostrophe (’) after the
memory location number to indicate that memory
scrolling is active.
NOTE If you have the Name Preference feature
selected, the above information is reversed. Refer
to the Number Preference section on page 52 for
more details.
Last Number Recall
1. Press ‰ (optional, allows you to see
number).
2. Press Í to place a call to the last number
displayed.
This feature automatically remembers the last
phone number entered from the keypad or
recalled from memory.
Recalling Last 10 Numbers Dialed
1. Press ‰, ‚, ‚. L0’ will display followed
by the name or number of the most recently
placed call.
2. Scroll the last ten numbers dialed with ≤
and ≥ (• and £).
3. To place a call to a displayed number, press
Í.
33
Memory
This feature allows you to refer to or redial any of the
last ten phone numbers to which calls were placed.
The numbers are stored in the order placed and
always represent the ten most recent calls.
Successive calls to the same number are stored only
once, and all are retained when the unit is shut off.
NOTE When scrolling, you may observe that a
location number is skipped. This may be caused
by pressing Í when the display is empty and
does not mean that a number has been lost.
Recalling an Area Code and Prefix
(Postscripting)
1. Recall two-digit location number where an
area code and prefix is stored.
2. Add additional digits as needed.
3. Press Í.
You can add additional digits to the end of recalled
numbers by entering them before pressing Í.
This is particularly useful if you often place calls to
the same area code and prefix, e.g., an office, but
need to reach different extensions with each call.
Turbo Dial
Press and hold for one second any one of
the digit buttons ¤ through ·.
The digit buttons ¤ through · (⁄ is reserved
for Emergency Dialing) provide an advanced form
of Super Speed Dialing. Once numbers have been
stored in memory location 2-9, calls can be placed
from these locations by pressing the associated
34
Memory
key and holding for approximately one second.
There is no need to press Í.
NOTE If you wish to use memory location 1 for a
non-emergency number, the Emergcy message
may be deactivated through the feature menu
(refer to page 48).
In order to prevent the accidental pressing of
these keys, Turbo Dial can be deactivated through
the feature menu.
NOTE Turbo Dialing is affected by Call Restriction
Service Levels 1, 2, 3, and 8 (see page 62). Do
not select these service levels if you wish to use
Turbo Dialing.
One Touch Dialing Keys
Your phone has three special dialing keys, ≈,
¥, and Ω, which allow for easy one touch
access to numbers stored in these locations. See
page 45 for more details on how to use these keys.
Super Speed Dialing
1. Enter the location number.
2. Press Í.
Memory locations 1-99 are equipped with Super
Speed Dialing capability. Once information is
stored in these locations, Super Speed Dialing
allows you to place a call without pressing ‰.
The number dialed will not display for review.
NOTE Do not attempt the sequence ‚, Í. This
will place a call to the local operator.
35
Memory
Scratch Pad Memory
The scratch pad permits entry of numbers from
the keypad during conversation.
If your party gives you another number to call,
simply enter this from the keypad. If you make an
error, press Ç to erase the last digit entered or
hold Ç to erase the entire entry.
Advise your party that they will hear tones as you
store the number. To call the scratch pad number at
the end of an ongoing conversation, press ´, Í.
NOTE Refer to the Scratch Pad Tones feature
(page 55) for details on silencing the tones.
Tone Dialing (Two-Part Calling)
Your telephone provides the standard Dual Tone
Multi-Frequency (DTMF) signals typically used to
access alternate long distance services, signal
pagers, answering machines, etc. Generally, these
services use a two-part procedure: First, a call is
placed from the memory or through the keypad to
a central telephone number, then a secondary dial
tone is heard and the additional tone digits are sent.
To tone dial from the keypad, make the initial call.
Append additional tone digits using the keypad.
The tones are automatically sent as you press the
keys. Do not press Í.
EXCEPTION If you have selected silent scratch
pad, you must press ‰, Í after entering the
additional digits.
36
Memory
To tone dial from a memory location, place the
initial call. Recall from memory (using ‰, location
number) the number you wish to send as DTMF
digits. Press ‰, Í. Repeat these steps as
required to send separate groups of numbers.
Two-part calling can be automated by a unique
feature which permits the programming and
memory storage of pauses between groups of
numbers. When recalled or sent, the telephone
stops transmitting at the pause and waits for your
response (i.e., secondary dial tone).
Two methods of Pause Dialing are explained below:
• Memory Linking is used when constant number
sequences are required, such as banking
inquiries, answering machines, and voice mail.
• Calling Card Dialing provides you with a method
for storing lengthy calling card information in the
phone’s memory and sending this information
quickly and easily.
Once this information is stored, a few key
presses will transmit the linked information. The
phone will even prompt you to insert the number
you wish to call.
37
Memory
Pause Dialing (Memory Linking)
1. Enter the first group of numbers from
the keypad or recall them from memory
using ‰.
2. Insert a pause by pressing Ï, Í. ø will
appear where the pause is inserted. To
store, press Ø.
3. Enter the next group of numbers, or recall
them from memory by pressing Ï, ‰,
two-digit location number.
4. Repeat this sequence for as many groups
as you wish up to a maximum of 32 digits.
(Each pause occupies a digit.)
EXAMPLE To construct a number sequence
which you might use to inquire about your bank
balance, follow this example. The entry sequence
required by the bank is to call the access number,
wait for the tone, enter your ID number followed
by £, wait for the tone, then enter your account
number and £.
The bank’s telephone number is 123-4567. Your
ID number is 888. Your account number is 22.
NOTE Pressing • or £ may be required by the
bank.
38
Memory
Instruction and Key
Sequence
1 Enter the phone number of the
bank — ⁄, ¤, ‹, ›, fi,
fl, ‡ or recall it from memory
location xx — ‰, x, x
2 Create a pause —
Ï, Í
Display
1234567
INSERT
PAUS ø
3 Press Ø
4 Enter the ID number and a
pound sign — °, °, °, £
or recall it from memory location
xx — Ï, ‰, x, x
5 Create another pause —
Ï, Í
234567ø
12345
67ø888C
INSERT
PAUS ø
6 Press Ø
123456
7ø888Cø
7 Enter the account number and a
pound sign — ¤, ¤, £
34567ø8
88Cø22C
8 To store number, press Ø and
the two-digit location number.
Press Ø to bypass the Alpha
message in the display. The
memory location number will be
displayed to confirm storage.
ALPHA
or sto
–
To place a linked call, press Í to transmit the
first group of numbers, prior to the first pause.
39
Memory
After waiting for the system response, press Í to
send the second group of numbers. Continue to
press Í until all digit groups are sent.
If the PIN code feature is activated (see page 56),
the PIN code will automatically be sent after the
first pause by pressing Í.
To store a linked sequence, press Ø, then enter the
location number where you wish to store the number.
Each memory location will only accept up to 32 digits.
NOTE Long Tone DTMF signals cannot be sent
using this procedure. If Long Tone DTMF signals
are required, they must be sent manually. The tone
will be sent for as long as the key is depressed.
NOTE Do not add the PIN code to the linked
sequence. Your phone will automatically insert the
PIN code when placing a linked call. Follow the
instructions on page 56.
Calling Card Dialing
The following is a typical example of information
required to make a credit card call. The order of
information may vary depending on your service
provider. The information provided below is
designed to accommodate credit card dialing for
the three major long distance carriers.
To enter your calling
card number into memory:
1. Enter your calling card access phone
number. (Typically this is a 1-800 phone
number or a 0. If a 0, skip to step 4.)
2. Insert a pause by pressing Ï, Í, Ø. ø
will appear where the pause is inserted.
40
Memory
3. Press ‚. (Long distance carriers typically
require that a 0 be placed before the number
you are calling.)
4. Press Ï, Í, £. NUM ‘N’ will display. This
serves as a marker for the spot where the
phone number you wish to call will be
automatically inserted into the sequence.
5. Press Ø. This stores the N character.
6. Insert another pause by pressing Ï, Í,
Ø. ø will appear where the pause is inserted.
7. Enter your credit card PIN number.
8. Press Ø and one of the three One Touch
Dial keys or Turbo Dial locations (1-9).
9. The phone will then automatically prompt
for alphabetic name input. Enter a name and
then press Ø or simply press Ø to
bypass the addition of an alphabetic name.
10.The phone will confirm storage by
displaying STORED for One Touch Dial keys
or the memory location number for Turbo
Dial locations.
This feature provides you with a convenient
method for saving your credit card calling
information in the phone’s memory. You can then
readily place calls without having to enter your
credit card information every time you place a
credit card call. Your credit card call can
conveniently be sent to a phone number stored in
any memory location or you can dial the phone
number through the keypad. The only requirement
is that the number you wish to call through memory
recall or dialing, must include the area code.
41
Memory
Instruction and Key
Sequence
Display
1 Enter the access number.
1800
1234567
2 Enter a pause — Ï, Í
INSERT
PAUS ø
3 Press — Ø
18001
234567ø
4 Press — ‚
180012
34567ø0
5 Enter a pause — Ï, Í
INSERT
PAUS ø
6 Press — £
NUM ’N
7 Press — Ø
8001234
567ø0 ’N
8 Enter a pause — Ï, Í
INSERT
PAUS ø
9 Press — Ø
10 Enter your credit card PIN number
0012345
67ø0 ’Nø
67ø0’Nø
8901234
11 To store number, press Ø and the One Touch
Dial key or the Turbo Dial key. Press Ø again to
bypass Alpha display. The memory location
number will be displayed to confirm storage. If you
stored the number in a One Touch Dial location,
STORED will be displayed to confirm storage.
42
Memory
To place a call using your credit card:
1. Recall and send the credit card memory
location. You can do this in the following
ways:
a. If the credit card number is stored in a
One Touch Dial location, simply press and
hold the appropriate One Touch Dial key for
one second.
b. If the credit card number is stored in a
Turbo Dial location (1-9), simply press and
hold the appropriate key for one second.
2. The display will flash Enter Number. This is
the prompt to enter the phone number you
wish to call.
3. Enter the phone number you wish to call or
recall it from memory. Note that the area code
must be included. You may enter and send
the phone number in the following ways:
a. Enter the number manually. The number
must be three or more digits. Press Í to
initiate the call.
b. Enter the Turbo Dial location where the
number is stored. You do not need to press
Í to initiate the call.
c. Enter ‰ and the two-digit memory
location. Press Í to initiate the call.
4. The call is now initiated. The first group of
numbers will be transmitted (i.e., the access
number or number you are calling). After
waiting for the system response, press the
One Touch Dial key to send the second
group of numbers (i.e., the number you are
calling or the credit card PIN number). If a
third group is required for your credit card,
43
Memory
wait for the next system response and press
the One Touch Dial key again.
IMPORTANT If your credit card number is stored
in a Turbo Dial location, you must press Í rather
than the Turbo Dial key to send additional groups
of numbers.
EXAMPLE Use the credit card information stored
in One Touch Dial location 1 to place a credit card
call to a ten-digit phone number stored in memory
location 3.
Instruction and Key
Sequence
Display
1 Recall and send your credit card
number. In this example, use One
Touch Dialing. Press and hold
≈ for one second.
ENTER
NUMBER
2 Enter and send the phone number
you wish to call. In this example,
memory location 3 is sent via Turbo
Dialing. Press and hold ‹ for one
second. (The Signal Strength Meter
will display and the In Use light will
begin to flash to let you know that
the call has been initiated.)
S––––––
3 Send the final series of digits
(i.e., your credit card PIN
number) after you hear the
system response. (You will hear
the tones as the digits are sent.)
S––––––
44
Memory
One Touch Dialing Keys
Press and hold the One Touch Dial Key
≈, ¥, or Ω.
To Store a Number
1. Enter phone number to be stored.
2. Press Ø.
3. Press specific One Touch Dial Key.
4. The phone is automatically in Alpha Entry
Mode. Enter a name or bypass by pressing
Ø.
5. Phone will confirm storage by displaying
Stored.
These keys function like Turbo Dial keys. When you
press and hold ≈, ¥, or Ω, a call is placed to
the number stored in that position. To recall the number,
press ‰, and the specific One Touch Dial Key. To
clear the number, press Ç, Ø, and the specific
One Touch Dial Key. ALPHA or sto will appear.
Press Ø. The unit will display the name and number
along with Change?. Press Ø to clear both name
and number.
One Touch Emergency Dialing
1. Press and hold ⁄.
2. Emergcy will display.
Memory location 01, a Turbo Dial location, may be
used for 911 or any other emergency number you
may wish to dial even if your phone is locked.
NOTE Do not select Call Restriction Service
Levels 1, 2, 3, or 8 if you wish to use One Touch
Emergency Dialing.
45
Memory
Emergency dialing can be deactivated by using
the feature menu found on page 48. When this
feature is deactivated, the number stored in
memory location 01 will still be dialed if the phone
is unlocked and if you press and hold ⁄, but
Emergcy will not display.
NOTE Automatic Redial does not work with
emergency dialing while the phone is locked.
Change Memory Entries Alpha or Numeric
1. Press ‰ and the two-digit location number.
2. Press ‰ again, if necessary, so that the
phone number to be changed is displayed.
3. Edit phone number by pressing Ç to back
out the digits to be changed. Enter new digits.
4. Press Ø and the same two-digit location
number.
5. ALPHA or sto will be displayed.
6. Change or add alpha name tag if desired. To
edit name, press Ç to back out the letters
to be changed. Enter new alpha characters.
(Enter alphabetic characters as described
on page 27.)
7. Press Ø.
8. You will see a Memory Protect message;
press Ø to overwrite.
9. Memory location number will display as
confirmation.
NOTE See Number Preference feature on page
52 for more details on step 2 above.
46
Memory
Clear Memory Entries
Clearing via Memory Name
1. Press Ï, ‹ to enter alphabetic memory.
2. Review the memory locations using memory
review (see page 31), and recall the entry
you wish cleared.
3. Press Ç. The unit will display Clear?.
4. Press Ø to clear both name and number.
or
Press ´ to exit without deleting the entry.
Clearing via Memory Location Number
1. Press Ç, Ø, and the two-digit location
number to be cleared.
2. ALPHA or sto will display. Press Ø to
bypass.
3. The phone will display Full, flash number in
memory, followed by Change?.
4. Press Ø to clear.
or
Press ´ to exit without deleting the entry.
47
Features
Feature Menu
The feature menu permits review, selection, and
cancellation of most of your telephone’s features
through the keypad and display. The chart below
shows all features available through the menu and
the pages where detailed information is found.
Feature
Page
Auto Answer
Auto Lock
Call Receive
Emergency Call
Extended Talk
HF Auto
Individual Timer
Keypad Tones
Multi Key Answer
Number Preferred
One-Minute Timer
PIN Active
Remind Message
Ringer On
Ringer Style
Scratch Pad Tones
Select Language
52
61
19
45
65
25
59
54
53
52
59
56
55
54
65
55
64
Signal Meter
Theft Alarm
Turbo Dial
49
61
34
48
Features
Additional telephone features, that may be available
with your phone but are not accessed through the
feature menu, are also described in this section.
To Select/Cancel Menu Features
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≥ or ≤
(• or £) until the desired feature displays.
3. Press Ç to toggle the feature off or Ø to
activate.
4. Press ´ to exit the feature menu.
EXAMPLE To activate silent keypad, press Ï,
⁄, and scroll with £ or ≤ until the display
shows keypad tone on.
Press Ç to deactivate this feature. The display
will then show keypad Tone Off.
Press ´ to exit the menu.
Signal Strength Meter
To Disable the SSM from Displaying
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≥ or ≤
(• or £) until signal meter on displays.
3. Press Ç once to disable the SSM. To
reactivate the SSM press Ø.
4. Press ´ to exit the feature menu.
See page 20 for more details on the operation of
the SSM.
49
Features
Feature Status Review
To Review Status
1. Press Ï, ‚, ·, ‰.
2. Press ≤ or ≥ (• or £) to scroll
messages.
3. To activate a feature that is displayed press
Ø.. To deactivate a feature press Ç.
To End Review
Press ´.
Microphone Muting
To mute microphone
Press Ï, fl.
To disable mute
Press Ï, fl again.
This feature allows you to confer privately with
others in the car during a call. It will disable the
microphone and display Mute. Note that M for
Mute appears on fl. The mute feature is
canceled if you end your call.
Auxiliary Alert
1. Press Ï, › with the unit on, unlocked,
and Theft Alarm and Silent Ringer inactive.
ALERT will display.
2. Turn off the vehicle ignition.
The Auxiliary Alert feature allows an additional
alerting device (horn or lights) to be activated for
the first five rings (20 seconds) of an incoming
50
Features
call. This is useful if you intend to be outside of
the vehicle and expect a call.
NOTE Determination of whether the Auxiliary Alert
feature is desired and, if so, which alerting device
is to be used is made at the time of installation.
Note that H for Horn appears on ›. The external
alerting device (horn or lights) will only respond if
the vehicle ignition switch has been turned off.
NOTE A call cannot be in progress when you
enable Auxiliary Alert. Auto Answer is disabled
during Auxiliary Alert.
When the Auxiliary Alert mode is enabled, the
mobile telephone remains on despite the vehicle
ignition being turned off. Calls may be placed while
in the Auxiliary Alert mode unless the unit has also
been locked subsequent to pressing Ï, ›.
NOTE If left active for more than eight hours, the
telephone will turn itself off to preserve your
vehicle’s battery.
The Auxiliary Alert mode is automatically disabled
the next time the ignition is turned from off to on.
The Auxiliary Alert mode can also be disabled by
pressing ∏ or by pressing Ï, › again. ALERT
will turn off when the feature is disabled.
51
Features
Number Preference
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≥ or ≤
(• or £) until number pref on displays.
3. Press Ç once to toggle this feature off, and
Ø to toggle it on.
4. To exit the feature menu, press ´.
The Number Preference feature reverses the
display order of memory entries so that the
number will be displayed before the name.
Automatic Answer
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≥ or ≤
(• or £) until auto ansr off displays.
3. Press Ç once to toggle this feature off, and
Ø to toggle it on.
4. To exit the feature menu, press ´.
This feature permits you to answer calls without
pressing Í. When your phone receives a call, it
will ring twice, then activate the Hands Free system.
NOTE We suggest that you do not select the
Automatic Answer and Silent Ringer simultaneously
since incoming calls will then be announced only by
the flashing Call in the display. Also, this feature
may be incompatible with certain enhanced
system services, such as no-answer transfer.
Consult your Cellular Service Provider.
52
Features
Multiple Key Answer
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≤ or ≥
(• or £) until multkey ansr off displays.
3. Press Ç once to toggle this feature off, and
Ø to toggle it on.
4. To exit the feature menu, press ´.
The Multiple Key Answer feature allows you to
answer an incoming call by pressing Í or any
digit key ⁄ through ·.
Call Receive
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≥ or ≤
(• or £) until Call rcv on displays.
3. Press Ç once to toggle this feature off, and
Ø to toggle it on.
4. To exit the feature menu, press ´.
Use this feature if you prefer not to receive incoming
calls but wish to be informed of the attempt. If your
cellular service offers No-Answer Transfer, the
calls received while this feature is in effect can be
routed to a secretary or answering machine.
When the phone is on and this feature is selected,
incoming calls are signaled by several short bursts
of tone, Call in the display, and the green on
indicator. Without No-Answer Transfer, the caller
will receive the ‘Not in Service’ recording.
As a reminder that incoming call screening is
selected, the unit will sound the special tone burst
each time it is turned on.
53
Features
NOTE We suggest you do not select Incoming
Call Screening and Silent Ringer simultaneously
since the incoming call will not be signalled by a
short burst of tone.
Ringer
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≥ or ≤
(• or £) until ringer on displays.
3. Press Ç once to toggle this feature off, and
Ø to toggle it on.
4. To exit the feature menu, press ´.
The telephone’s ring tones may be silenced where
they could prove a distraction, as during a business
conference, etc. In this case, incoming calls are
announced only by a flashing Call in the display.
NOTE We suggest you do not select the Silent
Ringer and Automatic Answer simultaneously,
since the phone will then answer a call without
audible indication.
Keypad Tones
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≥ or ≤
(• or £) until Keypad tone on displays.
3. Press Ç once to toggle this feature off, and
Ø to toggle it on.
4. To exit the feature menu, press ´.
When selected, this feature silences the tones
used to indicate keypad depressions.
54
Features
Scratch Pad Tones
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≥ or ≤
(• or £) until scrpad tone on displays.
3. Press Ç once to toggle this feature off, and
Ø to toggle it on.
4. To exit the feature menu, press ´.
Use this feature to enter scratch pad numbers
during a call without transmitting DTMF tones. You
will hear the tones, but your called party will not.
NOTE Should you wish to transmit DTMF tones
(to access answering machines, pagers, automatic
menus, etc.) while Silent Scratch Pad is activated,
enter the digits and press ‰, Í.
Remind Message
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≥ or ≤
(• or £) until Remind Msg off displays.
3. Press Ç once to toggle this feature off, and
Ø to toggle it on.
4. To exit the feature menu, press ´.
Reminder tone is an audible message to alert the
user that they have received a short message. It
will beep every two minutes until the new
messages are read.
Your cellular carrier may offer enhanced features,
such as short messaging. Ask your cellular service
provider if this is supported in your system. If short
messaging is not supported in your system,
reminder beep selection will have no effect.
55
Features
PIN Code Activation
Activate PIN Code
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≥ or ≤
(• or £) until pin inactive displays.
3. Press Ç once to toggle this feature off, and
Ø to toggle it on.
4. To exit the feature menu, press ´.
Store PIN Code in Memory Location 07
1. Enter PIN code.
2. Press Ø.
3. Press ‚, ‡.
Place a Call With PIN Code Active
1. Enter number to be called, or recall from
memory.
2. Press Í. Wait for double tone – “beep, beep.”
3. Press Í. The phone will automatically send
the PIN code stored in memory location 07.
Your cellular carrier may require a personal
identification number (PIN) when placing outbound
calls. This code assures the cellular system that
the person placing the call is an authorized user.
Ask your cellular service provider if this is required
in your system.
Only select this feature if your cellular service
provider requires it.
This feature will allow you to automatically send
your PIN code with all outbound calls. If Invalid
PIN displays, check to see if you have activated
the feature in the menu without storing a PIN
56
Features
number in memory location 7. The PIN code must
be less than seven digits.
If you enter a service area which does not require a
PIN code, disable the feature in the feature menu.
Timers
Call timers provide a useful means of monitoring
the air-time spent in conversation. Several of
these operate in the background and can be
displayed at any time. Another offers tones heard
only on your side of the conversation.
Each timer begins counting as a cellular channel
is assigned, or when the phone rings to signal an
incoming call. If an incoming call is not answered,
the timers revert to their previous values.
Individual Call Timer
To Display
Press ‰, £, £.
This timer accumulates the air-time of a call in
minutes and seconds.
It automatically resets before a new call is placed
and when the phone is turned off.
57
Features
Resettable Call Timer
To Display
Press ‰, £, £, £.
To Reset
Press Ï, ‚, ‡, Ç.
This timer accumulates the air-time in minutes
from the point at which it is reset.
This resettable timer is generally utilized to track
monthly air-time usage and is set in conjunction
with the monthly billing cycle.
NOTE If you have two phone numbers
programmed in your phone, each phone number
has its own resettable call timer. To view the
resettable call timer associated with the other
phone number, switch your phone to that number,
then use the sequence above.
Cumulative Call Timer
To Display
Press ‰, £, £, £, £.
This is a non-resettable timer which accumulates
the phone’s total air-time in minutes, starting with
the initial factory setting.
NOTE If you have two phone numbers
programmed in your phone, each phone number
has its own cumulative call timer. To view the
cumulative call timer associated with the other
phone number, switch your phone to that number,
then use the sequence above.
58
Features
Individual Timer
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≥ or ≤
(• or £) until indiv timroff displays.
3. Press Ç once to toggle this feature off, and
Ø to toggle it on.
4. To exit the feature menu, press ´.
This feature automatically displays the
accumulated time in minutes and seconds during
and after each call.
One-Minute Timer
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≥ or ≤
(• or £) until one min timroff displays.
3. Press Ç once to toggle this feature off, and
Ø to toggle it on.
4. To exit the feature menu, press ´.
This timer provides a tone ten seconds before the
end of each minute during calls.
Security Features
Your telephone offers several forms of security
against unauthorized use. These require either
your three-digit unlock code, or the six-digit
security code. The factory programmed unlock
code is 123 and the factory programmed security
code is 000000.
59
Features
Electronic Lock
To Lock
1. Press Ï, fi.
2. Lock? will display.
3. Press Ø to lock.
4. Press ´ to exit.
To Unlock
Enter your three-digit unlock code. If you make
an error, press Ç and start again.
The electronic lock prevents use of the telephone
by disabling both incoming and outgoing calls. To
help remember which key to use, note that L for
Lock appears on fi.
If a call is received during this period, the phone
will ring and you must enter the unlock code
before the call can be answered.
Change Unlock Code
1.
2.
3.
4.
Press Ï, ‚.
Enter your six-digit security code.
Enter the new desired three-digit unlock code.
Press Ø. The new unlock code will display
to confirm storage.
Display Unlock Code
1. Press Ï, ‚.
2. Enter your six-digit security code.
3. Press ‰. The phone will display loccode
and the three-digit unlock code.
60
Features
NOTE Use this procedure if you have forgotten
your current three-digit unlock code.
Automatic Lock
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≤ or ≥
(• or £) until auto lock off displays.
3. Press Ç once to toggle this feature off, and
Ø to toggle it on.
4. To exit the feature menu, press ´.
This feature automatically locks your phone each
time it is turned off.
Theft Alarm
To Select (On)
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≤ or ≥
(• or £) until theft alrmoff displays.
3. Press Ç once to toggle this feature off, and
Ø to toggle it on.
4. Press ´ to exit the feature menu. The
phone will display Armed.
5. Enter the phone number to be called or
recall a number from memory.
6. Turn off the ignition. Your telephone will turn
off as well.
To Cancel (Off)
1. Turn on the ignition.
2. Enter your three-digit unlock code within 30
seconds.
When the theft alarm is selected or an
unauthorized person turns on your phone and does
61
Features
not enter your unlock code within 30 seconds, an
alerting call will be placed to the phone number you
have stored in this feature. If the phone receives a
busy signal, it will repeat the call automatically.
Anyone answering the call will hear alternating
high and low pitched tones (siren). If you elected
to have the Auxiliary Alert feature installed, the
auxiliary alerting device will also be activated. The
phone will then repeat the call.
The removal of the control unit will not prevent
your mobile telephone from attempting to place
the call. However, if the antenna has been
removed, the phone will be prevented from
successfully completing the call. The Auxiliary
Alert device will still be activated.
NOTE If you inadvertently trip the theft alarm and
the alarm call is placed, you can stop the alarm by
entering your three-digit unlock code. This feature
must be reset in the feature menu each time the
phone is disarmed.
If PIN code is activated, the theft alarm will not
work as the PIN code must be sent manually in
order to complete the call.
Change Service Level
1. Press Ï, ‚.
2. Enter your six-digit security code.
3. Enter the number of the service level you
wish to use.
4. Press Ø. The phone will display service
level and the number selected.
62
Features
Your telephone can be set to restrict call
placement (as when lending the phone to another
person). Using the six-digit security code, you may
select one of the following levels of restriction.
Service
No restrictions. (Standard setting)
Full keypad and directory dialing.
No storage in directory locations
1-10 or One Touch Dial locations.
Keypad dialing only. No directory
or Turbo Dial access.
Phone will place calls from all directory
locations (‰, ‚ ⁄ - · ·, Í).
No keypad dialing. No directory change
or storage.
Seven-digit (local) dialing only, including
directory and message calls (if seven
digits or less).
Phone will place calls only from
directory locations 1-10 (‰, ‚ ⁄⁄ ‚, Í). If locations 1-10 are
cleared, no outgoing calls can be made.
No keypad dialing. No directory or One
Touch Dial storage.
Turbo Dial and One Touch Dial locations
are restricted from display access.
Level
To change the phone to unrestricted operation, use
the procedure above and enter service level 4.
63
Features
Master Reset
CAUTION Once begun, this procedure cannot be
canceled or reversed.
1. Press Ï, ‚.
2. Enter your six-digit security code twice.
3. Press ⁄, Ø.
This feature allows you to reset the user selectable
options to their standard settings.
Master Clear
CAUTION Master Clear performs all the functions
of Master Reset, in addition to erasing all names
and numbers stored in memory, and clearing the
Resettable Call Timer. Once begun, this
procedure cannot be canceled or reversed.
1. Press Ï, ‚.
2. Enter your six-digit security code twice.
3. Press ·, Ø. Busy may display. You must
wait for this to clear before operating the
phone further. It may take several minutes,
depending on how full your dialing memory
is. Do not turn the phone off during this
operation.
Language Selection
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≤ or ≥
until Select Languag displays.
3. Press Ø to select this feature.
4. Scroll through menu by pressing ≤ or
≥.
64
Features
5. Press Ø to choose the desired language.
6. To exit the feature menu, press ´.
This feature allows you to change the language
that your menus and messages are displayed in.
You can choose from four different languages
(English, Spanish, French and Portuguese).
Extended Talk
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≤ or ≥
until Extend Talk On displays.
3. Press Ç once to toggle this feature off and
Ø to toggle it on.
4. To exit the feature menu, press ´.
The extended talk feature allows you to conserve
battery power when operating in a strong signal
area.
Ringer Style
1. Press Ï, ⁄.
2. Scroll the menu by pressing ≤ or ≥
until Ringer Style _ displays.
3. Press Ø to select this feature.
4. Press ⁄ - · to sample the different ringer
styles.
5. Press Ø to select the desired ringer style.
6. To exit the feature menu, press ´.
This feature allows you to select one of nine
different ringer styles to differentiate when your
phone is ringing. When selected, the phone will
give you a brief sample of that ringer style.
65
Reference
The Cellular System
There are generally two types of cellular systems
serving any metropolitan area. One of these will
most likely be operated by the telephone company
that provides telephone service to your community,
generally referred to as a wireline carrier. The
other cellular service provider is a radio common
carrier, referred to as a non-wireline carrier.
Your Cellular Service Operator will provide
information concerning specific features,
procedures, and coverage in your particular area.
Service Area
The area within which the telephone operates is
defined by your cellular service provider. Since this
is a radio system, no exact boundaries (as on a
map) can be drawn. The red No Svc (No Service)
indicator will be displayed if you are beyond range
of a service area. There may be locations within
your area, such as tunnels and underground parking
facilities, where the phone may act as if it were
beyond range.
Weak Signal Alert
If you are called while in a location the system
determines is inadequate for high quality service,
you may hear a series of beeps to inform you of
the call attempt. The caller will receive the
recorded ‘not in service’ message, Call will
display, and the green on indicator will flash
quickly. If this occurs, you must press Ç before
66
Reference
the phone will operate. Most systems do not
impose air-time charges for such call attempts.
NOTE This indicator is controlled through the
initial programming of your phone and is usually
deactivated. Refer to the Programming Guide
under Step 11 for more details.
Switchhook and Enhanced
System Services
Press Í.
During a call, pressing Í performs a switchhook
function used to access enhanced Cellular System
features such as call waiting and conference calls.
For the functioning of these features with Í,
consult your Cellular Service Provider.
Roaming
The term ‘Roaming’ applies to the use of cellular
telephones within systems other than those
designated as their ‘Home’ system. Roam will be
displayed whenever the phone comes within range
of a visited system. As your phone begins to
roam, it seeks service according to the conditions
you have selected (see page 68).
Steady illumination of Roam signals that your
phone is accessing a home type system, while
flashing indicates the phone is attempting
connection through a non-home type system.
Contact your system operator, or that of the visited
system, for information on dialing and billing
procedures.
67
Reference
To use alternate long distance services when
roaming, be certain to dial the appropriate area
code and local number to access the alternate
carrier in the visited area. Then use the tone
dialing sequence described on page 36. If you
selected two-system operation (see page 22),
enter ‰, £ to verify the currently active
number. This is especially important if your two
home systems have different area codes, or if
Roam is flashing within your home service area.
Selectable System Registration
To Review Current Setting
1. Press ‰, •. The display will show the
current active system choice.
2. Press ´ to exit without changing selection.
To Select (On)
1. Press ‰, •. The display will show the
current active system choice.
2. Repeatedly press • to review the system
type modes. (Press ´ to exit without
changing selections.)
3. If you chose Pref’d SIDs, press Ø and then
enter the five-digit number at this time. Use
• and £ to move to the next SID location.
4. Press Ø to activate the displayed selection.
5. Press ´ to exit.
68
Reference
System Type Selection
Your telephone seeks cellular service according to
the mode you have selected. If you have selected
two-system operation, the phone seeks cellular
service according to the system type mode
selected for each phone number.
Constant flashing of Roam, or a steadily lit No Svc
while within your home service area may indicate
an unintentional choice has been made. If this
occurs, re-enter system type selection to see if the
unit is operating in standard mode, or if an
alternate selection has been made.
69
Reference
System Type Selection
Standard Mode
Your phone first seeks a home type system,
then a non-home type.
Display
Std A B
Std B A
Invert Preference Mode
Your phone first seeks a non-home type
system, then home type. (Select this mode if
in a fringe area of your home system or in
certain roaming situations.)
If home system is type A
Fast flashing Roam = call on B system
Slow flashing Roam = call on home
type system
Slow flashing In Use = call on home system
Scan B A
If home system is type B
Fast flashing Roam = call on A system
Slow flashing Roam = call on home
type system
Slow flashing In Use = call on home system
Scan A B
Home Only Mode
Phone will not operate outside its home system.
Home
Scan A Mode
Phone will operate only within A systems.
Scan A
Scan B Mode
Phone will operate only within B systems.
Scan B
Enter SID Mode
Unit will operate only within specifically identified
systems. This choice requires entry of up to 60
system ID numbers for those systems over which
you wish to operate. The SID digits are entered
as obtained from your Cellular Service Operator.
p scan
70
Reference
Troubleshooting
Is the unit locked?
See Electronic Lock, page 60.
Is the No Svc (No Service) indicator lit?
See Status Indicators, page 16.
Have you programmed a unique operating mode?
Constant flashing of the Roam indicator while in
your home service area may indicate that an
incompatible system type has been selected. See
Roaming, page 67.
Is the unit operating with non-standard settings?
You may have inadvertently selected improper
operating characteristics. See Feature Status
Review, page 50.
Are you having difficulty accessing devices
such as answering machines which require
longer access tones?
Your phone ships with Long Tone DTMF (Dual
Tone Multiple Frequency) Signal enabled. Check
your user NAM programming to be sure this
feature is enabled.
71
Reference
Quick Reference Feature Guide
Basic Operation
Turn It On
Lock
Unlock
Turn It Off
Place a Call
Receive a Call
End Call
∏.
Ï, fi.
Three-digit unlock code.
∏.
Enter number, Í.
Í, or lift handset to ear.
´, or return handset to its
mount.
Volume Control
Earpiece Lift handset, ≤ or ≥.
Speaker With handset mounted,
press and hold ≤ or
≥.
Ringer Ï, then ≤ or ≥.
Store to Memory
Number Only Phone number, Ø, twodigit location. To store in
next available location, Ø,
•.
Memory Recall
By Location ‰, two-digit location. Í
to place call.
Super Speed Memory location, Í.
Dialing
Turbo Dialing Press and hold memory
location (⁄-·) for one
second.
72
Reference
Feature Menu
Enter Menu Ï, ⁄. ≥ or ≤ (•
or £) to scroll.
Select Feature Ø.
Cancel Feature Ç.
Exit ´.
Additional
Features
Status Review Ï, ‚, ·, ‰. ≥ or
≤ (• or £) to scroll.
Last Number ‰, Í.
Recall
Display Own ‰, £.
Number
Activate Other ‰, £, Ø.
Number
Mute Microphone Ï, fl.
Scratch Pad Enter numbers during call.
´ to terminate call and
Í to place call to scratch
pad number.
73
Reference
Message Glossary
’
A1
A2
ARMED
B––==≠≠
B1
B2
BUSY
CALL
delayed
HOME
LEVEL 1
LEVEL 2
LEVEL 3
LEVEL 4
LEVEL 5
LEVEL 6
LEVEL 8
MUTE
74
(Apostrophe) Scrolling activated
• displayed as “A”
Two System Operation (Active
system is non-wireline, using phone
number 1.)
Two System Operation (Active
system is non-wireline, using phone
number 2.)
Theft Alarm selected
Battery Strength Meter (number of
bars indicates relative level of
strength)
Two System Operation (Active
system is wireline, using phone
number 1.)
Two System Operation (Active
system is wireline, using phone
number 2.)
Master Clear functioning
Precedes Cumulative Timer display
(also used to display £)
Shows incoming call (also used to
indicate call in absence)
Delayed Call Placement activated
System Type Selection – Home
Mode
Service level selected
Service level selected
Service level selected
Service level selected
Service level selected
Service level selected
Service level selected
Microphone muted
Reference
ON
S––==≠≠
Telephone is on
Precedes display of Resettable Timer
Signal Strength Meter (SSM)
(number of bars indicates relative
signal strength)
SCAN A
System Type Selection (scan “A”
only)
SCAN AB
System Type Selection (scan “A”
type first, then “B”)
SCAN B
System Type Selection (scan “B”
only)
SCAN BA
System Type Selection (scan “B”
type first, then “A”)
STD
All user features set to standard
System Busy Cellular system is busy
V––==≠≠
Volume Meter (number of bars
indicates relative volume level)
75
Reference
Rules, Regulations, & Precautions
The U. S. Federal Communications Commission
and the Canadian Department of Communications
regulate cellular radiotelephone service in their
respective countries. It is important for you, the
cellular radiotelephone user, to observe the
applicable regulations when operating your cellular
phone in either country. In addition to these U. S.
and Canadian regulations, you may also be bound
by certain state, provincial, territorial, and local
rules and regulations, as well as by your cellular
carrier’s tariff (the rates, terms, and conditions of
its service). If you wish to use your cellular
radiotelephone in both the U.S. and Canada,
please consult with your system operator.
Furthermore, you should remember that your
cellular phone is a radiotelephone, – i.e., it
combines both wireline technology, as used in
your home or office telephone system, and radio
technology – and that the scope of regulations and
precautions is therefore broader than the scope of
regulations and precautions relating to wirelineonly telephone usage.
Some of the major points of consideration are set
out below. Please note, however, that this ‘Rules,
Regulations, & Precautions’ section does not
constitute legal advice; and is intended merely for
general information purposes. If you have any
specific questions, please contact your Cellular
Carrier (System Operator).
76
Reference
License
If your home system is in the U. S., you do not
require a separate license to operate your cellular
telephone; obtaining a cellular telephone access
number is sufficient to register you as a user. If
your home system is in Canada, a separate
license is required; your carrier will assist you in
the licensing process. If you wish to use your
cellular phone on both sides of the border, please
contact your Cellular Carrier (System Operator).
Denial of Service
A cellular carrier may deny service temporarily, or
terminate service for violation of any government
regulations or of its tariff.
Consumer Responsibilities
Remember that the wireline and radio regulations
with respect to harassing calls, false distress calls,
obscene language, etc. apply to cellular phone
usage.
Privacy
As a telephone user, you have come to assume a
certain standard of privacy when you place or
receive a telephone call via the traditional wireline
systems. However, because cellular
radiotelephones utilize radio transmissions to
effect calls, the same standard cannot always be
assured. While it is unlawful for an unauthorized
person to divulge or use any information obtained
from intercepting or “listening in on” conversations
intended for others, you should not assume that
your conversation is completely secure.
Commercially available scanning equipment can
77
Reference
permit a third party to monitor the radio channels
used for cellular telephone calls.
Interference
No person shall interfere with or cause
interference to any radio communication or signal.
Equipment Modifications
The U.S. Federal Communications Commission
has type-approved and the Canadian Department
of Communications has granted technical
acceptance to the model of cellular telephone
which you have purchased, and both have
allocated a specific frequency range for cellular
service. No changes or adjustments are to be
made to your cellular phone.
78
Reference
Index
Automatic Answer...........................................52-54
Automatic Hands Free...................................19, 25
Automatic Lock ....................................................61
Automatic Redial ......................................18-19, 46
Auxiliary Alert.................................................50, 62
Call in Absence Indicator.....................................19
Calling Card Dialing.......................................37, 40
Cancel Menu Features ........................................49
Change Memory Entries ......................................46
Change Service Level..........................................62
Change Unlock Code...........................................60
Clear Memory Entries ..........................................47
Cumulative Call Timer .........................................58
Delayed Call Placement ......................................74
Display Own Phone Number ...............................22
Display Unlock Code ...........................................60
Earpiece Volume .................................................21
Electronic Lock ..............................................60, 71
End a Call ............................................................19
Extended Talk......................................................65
Feature Menu .......12, 20, 25, 34-35, 46, 48-49, 73
Feature Status Review ..................................50, 71
General Safety Information..............................6, 11
Hands Free to Handset Operation.......................25
Incoming Call Screening.................................53-54
Individual Call Timer ............................................57
Individual Timer ...................................................59
Introduction ..........................................................11
Keypad Tones................................................49, 54
Language Selection .............................................64
Last Number Recall .................................11, 33, 73
Manual Handset to Hands Free Operation..........25
79
Reference
Master Clear ..................................................64, 74
Master Reset .................................................19, 64
Memory Autoload...........................................29, 31
Memory Blocks ...............................................30-31
Memory Linking ..............................................37-38
Memory Location Directory..................................83
Memory Protect ........................................28-31, 46
Message Glossary ...............................................74
Microphone Muting ..............................................50
Multiple Key Answer ......................................11, 53
Number Preference ............................32-33, 46, 52
One Touch Dialing Keys................................35, 45
One Touch Emergency Dialing............................45
One-Minute Timer................................................59
Pause Dialing .................................................37-38
Phone Overview ..................................................12
PIN Code Activation.............................................56
Place a Call...........17-18, 29, 31-33, 35, 43, 56, 72
Place a Hands Free Call......................................24
Postscripting .............................................28-29, 34
Quick Reference Feature Guide..........................72
Recalling an Area Code and Prefix .....................34
Recalling by Location Number.............................32
Recalling by Name...............................................31
Recalling from Memory........................................31
Recalling Last 10 Numbers Dialed ......................33
Receive a Call ...............................................19, 72
Receive a Hands Free Call..................................24
Remind Message.................................................55
Resettable Call Timer ....................................58, 64
Ringer ..................................................................54
Ringer Style .........................................................65
Ringer Volume................................................21-22
Roaming .............................................24, 67-68, 71
80
Reference
Rules, Regulations, & Precautions ................11, 81
Scratch Pad Memory ...........................................36
Scratch Pad Tones ........................................36, 55
Scrolling by Location Number..............................32
Scrolling by Name................................................31
Scrolling from Memory.........................................31
Security Features.................................................59
Selectable System Registration.....................23, 68
Service Area.................................57, 66, 68-69, 71
Signal Strength Meter........................11, 20, 49, 75
Silent Ringer .............................................50, 52-54
Speaker Volume ............................................12, 21
Store to a Location Number.................................29
Storing a Phone Number and a Name ................26
Storing Area Code and Prefix..............................28
Storing Information in Memory ............................26
Storing Phone Number Only................................28
Super Speed Dialing.......................................34-35
Switch to Second Phone Number........................22
Switchhook and Enhanced System Services ......67
The Cellular System ..................................6, 55, 66
Theft Alarm.........................................50, 61-62, 74
Timers......................................................11, 24, 57
To Select Menu Features ....................................49
Tone Dialing...................................................36, 68
Troubleshooting ...................................................71
Turbo Dial......................................34-35, 41, 43-45
Turn Phone On and Off .......................................15
Two-Part Calling .............................................36-37
Volume Meter ...........................................20-21, 75
Weak Signal Alert ................................................66
Welcome ................................................................4
81
Reference
Patent Information
Manufactured under one or more of the following
US patents.
4121218
4648125
4138681
4649543
4193036
D288683
4254382
4654655
4302845
D289156
4312074
4662691
4327319
4667333
4329666
4668917
4369516
4670747
4369522
4672502
4378603
4680787
4390963
4681476
D269873
4683585
4398265
4692726
4400584
4704588
4400585
D292578
D270835
4706036
D271491
D292920
Re.31470
4710724
4431977
4711361
4434461
4715063
4455534
4716319
4462098
4716391
D275951
4723305
4484153
D294257
4485486
4727306
4486624
4727583
D276809
4730195
4491972
4734635
D277667
4736277
4504834
4737976
D278708
4740794
4523155
4741018
4546329
4741034
4550426
4742562
4551696
D295627
4564821
4746242
D282169
D295973
4571595
D295975
4573017
4751737
4574243
D296187
4585957
4761621
4602218
4764737
D284759
D297734
D285439
D297735
4616314
4777564
4617520
Re.32768
D286778
D299136
4626309
4797929
4628529
4798975
4629829
4800348
4630304
4802236
4630305
4809356
4633141
4811377
4636593
4811404
4636741
4827226
D288432
4827507
Other patents pending
82
4829274
4837534
D301476
4843621
4845772
D302015
4851966
4868576
4870686
D303656
4876552
4879533
D305427
4896124
4897873
D305717
4904549
4905288
4905301
D306293
D306441
D306594
4912602
4918732
4922178
4945570
4954796
4959851
4963812
4963843
4965537
4972355
4972432
4972455
4975808
4984290
D314173
D315330
D315346
D315543
D315559
D315565
5004992
D315907
5008925
D316417
D316859
5017856
5018188
5020091
5020092
5020093
5028083
5028859
5029044
5029233
5031028
5036532
5053924
5057762
D320780
5059885
5060294
D322783
D322955
5081674
5083304
D324024
D324388
5095503
D325028
D325583
5109536
D325915
5113436
5117450
5121047
5122480
5122722
D327061
5128834
D328302
5142551
5142696
5146620
5148471
5148473
5148961
5150359
5150384
5152006
5157693
5163159
5164652
5166596
5175759
5175874
D332261
5182749
D332785
5185566
5187809
5193223
5195106
5195108
5201069
5204977
5210793
5214675
5222104
5222251
D337332
5230007
5230093
5233633
5235492
5237257
5239127
5241545
5241548
5241650
5241693
5242767
D339582
5249302
5251331
D340710
5260988
5261119
5262710
5263052
5276707
5278994
D343173
5280637
D344087
5287553
5287555
5287556
D344511
5301365
5321847
D348880
5349588
5359696
5361400
5363071
5365549
D352497
5366826
D353131
D353361
5375143
5375258
5379324
D354055
D354062
5384825
D356084
5402447
5406146
5406562
D357224
D357457
5410741
D357680
D357681
5428836
D359734
D359735
D359959
5432017
D360632
5438684
D361070
5442680
5446763
5448763
5448771
5453997
D362840
5457744
5459640
5463646
5465412
5469177
5475752
D365094
D365817
5486843
5487184
5488335
5488649
D366872
5493198
5493714
5497126
5497382
D367640
5499394
5506490
D368696
5510693
5511235
D369162
5513078
D369359
5519303
5519346
5524276
5524278
D370463
5530922
5542116
5544250
D372481
5546275
5546380
D372896
5551078
5559471
D374424
D374872
5572193
5574976
5577268
D375732
D375733
D375734
D375932
D375952
D376127
5588041
5589796
5590177
5594778
5594951
D377792
D377934
5604050
5606730
D378366
5613229
5613863
5615233
5621763
PAT111398
Reference
Memory Location Directory
Location
Name
Phone Number
83

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : 
Create Date                     : 2000:01:28 23:54:53
Title                           : Exhibit 8a.PDF
Author                          : bachaj
Producer                        : Acrobat PDFWriter 3.02 for Windows NT
Subject                         : 
Modify Date                     : 2000:01:29 00:04:38
Page Count                      : 84

EXIF Metadata provided by EXIF.tools