Motorola Mobility T6EK1 Portable PCS GSM Transceiver w/ Embedded Bluetooth User Manual UG C330 GSM

Motorola Mobility LLC Portable PCS GSM Transceiver w/ Embedded Bluetooth UG C330 GSM

UserManual.wiki >

Motorola Mobility >

T6EK1 User Manual

Exhibit 8 Users Manual

APPLICANT: MOTOROLA, INC. FCC ID: IHDT6EK1EXHIBIT 8INSTRUCTION MANUALA preliminary draft copy of the Users Manual follows:

1DraftWelcomeWelcome to world of Motorola digital wireless communications! We are pleased that you have chosen the Motorola A1000 multimedia communicator.Status LightTouchscreenEarpieceNavigation KeyPush center button left, right, up, or down to move through items. Press center button to select highlighted item.End KeyPress and release to end calls and to display phone dial pad.Camera (Point 2 Point)Two-way video conferencingSend KeyPress to make and answer voice or video calls. When not in a call, press to display call history.Game A KeyGame Key B3 KeySpeakerphoneKey

3DraftContentsWelcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Safety and General Information . . . . . . . . . . . . . . . . . . . . 9European Union Directives Conformance Statement . . . . . . . . . . . . . . . . . . . . . . . . . 15Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Optional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 17Installing the USIM Card . . . . . . . . . . . . . . . . . . . . . . . . 17Installing the Memory Card . . . . . . . . . . . . . . . . . . . . . . 19Battery Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Charging the Battery using the Travel Charger . . . . . . . 22Charging the Battery using the DesktopCharging Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Turning Your Communicator On and Off . . . . . . . . . . . . 23Setting Up Your Communicator for the First Time . . . . . 24Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . 24Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Using Your Communicator. . . . . . . . . . . . . . . . . . . . . . . . 26Communicator Display . . . . . . . . . . . . . . . . . . . . . . . . . . 26Using Touchscreen Control . . . . . . . . . . . . . . . . . . . . . . 27Using the 8-way Navigation Key . . . . . . . . . . . . . . . . . . . 27Using the 3 Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Using the Game Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

4DraftGame Key A and Game Key B . . . . . . . . . . . . . . . . . . 28Opening Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Switching Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Filing New Entry in Folder . . . . . . . . . . . . . . . . . . . . . 30Moving Entry to a Different Folder . . . . . . . . . . . . . . . 31Adding, Renaming, and Deleting Folders . . . . . . . . . . 31Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Handwriting Recognition . . . . . . . . . . . . . . . . . . . . . . 34Virtual Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Using AGPS Location Information . . . . . . . . . . . . . . . . . 36Limitations of AGPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Home Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Displaying the Home Screen . . . . . . . . . . . . . . . . . . . . . 38Screen Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Personalizing Home Screen . . . . . . . . . . . . . . . . . . . . . . 40Calling Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Opening Phone Application . . . . . . . . . . . . . . . . . . . . . . 41Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . 42Using the Internal Speakerphone . . . . . . . . . . . . . . . . . 42Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Making a Voice Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Dialing with the Keypad . . . . . . . . . . . . . . . . . . . . . . . 43Dialing Stored Phone Numbers . . . . . . . . . . . . . . . . . 43Redialing Failed Voice Calls . . . . . . . . . . . . . . . . . . . . 43Making a Video Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Making a Video Call to Another Phone . . . . . . . . . . . 44Making a Video Call to a Computer . . . . . . . . . . . . . . 45Calling an Emergency Number . . . . . . . . . . . . . . . . . . . 46Using AGPS During an Emergency Call . . . . . . . . . . 46Dialing the Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

5DraftAnswering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Switching to Airplane Mode . . . . . . . . . . . . . . . . . . . . . . 49Turning off Call Ringing . . . . . . . . . . . . . . . . . . . . . . . . . 49Messages and Email. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Setting up Messaging Accounts . . . . . . . . . . . . . . . . . . . 50Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50MMS and SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Opening Messaging Application . . . . . . . . . . . . . . . . . . . 52Creating and Sending Messages . . . . . . . . . . . . . . . . . . 53Email and SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53MMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Receiving and Reading Messages . . . . . . . . . . . . . . . . . 57Contact List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Opening Contacts Application . . . . . . . . . . . . . . . . . . . . 58Adding Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Adding New Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Recording Voice Tags for Contacts . . . . . . . . . . . . . . . . 62Deleting Voice Tags . . . . . . . . . . . . . . . . . . . . . . . . . . 63Editing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Communicating with Contacts . . . . . . . . . . . . . . . . . . . . 64Using Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Customizing Communicator Settings. . . . . . . . . . . . . . . 66Setting the Wallpaper Image . . . . . . . . . . . . . . . . . . . . . 66Setting the Screen Brightness . . . . . . . . . . . . . . . . . . 66Setting the Screen Calibration . . . . . . . . . . . . . . . . . . . . 67Setting the Volume for System Sounds . . . . . . . . . . . 67Setting a 3 Key Shortcut . . . . . . . . . . . . . . . . . . . . . . . . . 68Choosing Ring Tones . . . . . . . . . . . . . . . . . . . . . . . . . 68Choosing Ring Tones for Calls . . . . . . . . . . . . . . . . . . 68Choosing Ring Tones for Messages . . . . . . . . . . . . . . 69Choosing a Vibrate Pattern . . . . . . . . . . . . . . . . . . . . . . 69

6DraftGetting More Out of Your Communicator. . . . . . . . . . . . 71Installing the A1000 Desktop Suite . . . . . . . . . . . . . . . . 71Connecting a Bluetooth Device . . . . . . . . . . . . . . . . . . . 72Changing Your Bluetooth Settings . . . . . . . . . . . . . . . 73Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . 74Setting Up a USB Cable Connection . . . . . . . . . . . . . 74Setting Up a Bluetooth Connection . . . . . . . . . . . . . . 74Using the Desktop Suite . . . . . . . . . . . . . . . . . . . . . . . 75Using Remote Synchronization . . . . . . . . . . . . . . . . . . . 75Setting Up Your Account . . . . . . . . . . . . . . . . . . . . . . 75Configuring the Settings . . . . . . . . . . . . . . . . . . . . . . . 76Using Picsel Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77Opening Documents . . . . . . . . . . . . . . . . . . . . . . . . . . 77Navigating Documents . . . . . . . . . . . . . . . . . . . . . . . . 78Setting Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . 80Personal Organizer Features. . . . . . . . . . . . . . . . . . . . . . 81Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Adding a Calendar Entry . . . . . . . . . . . . . . . . . . . . . . 81Switching Calendar Views . . . . . . . . . . . . . . . . . . . . . 83Moving Entries to the To Do Application . . . . . . . . . . . 84To Do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Adding Entries: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85Marking Tasks as Complete . . . . . . . . . . . . . . . . . . . . . . 86Deleting Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87Moving Entries to Calendar . . . . . . . . . . . . . . . . . . . . 87Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Adding Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Setting the Time and Date . . . . . . . . . . . . . . . . . . . . . . . 89Setting Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90Setting Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91Responding to Alarms . . . . . . . . . . . . . . . . . . . . . . . . 91

7DraftTurning Alarm Sounds Off . . . . . . . . . . . . . . . . . . . . . 92Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Making Voice Recordings . . . . . . . . . . . . . . . . . . . . . . . . 92Playing a Recording . . . . . . . . . . . . . . . . . . . . . . . . . . 94Deleting a Recording . . . . . . . . . . . . . . . . . . . . . . . . . 94Sending a Recording . . . . . . . . . . . . . . . . . . . . . . . . . 94Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Locking and Unlocking Communicator . . . . . . . . . . . . . . 95Establishing Password Protection . . . . . . . . . . . . . . . . 95News and Entertainment . . . . . . . . . . . . . . . . . . . . . . . . . 97Web Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Setting Up Your Internet Account . . . . . . . . . . . . . . . . 97Opening Web Browser . . . . . . . . . . . . . . . . . . . . . . . . 97Opening Web Pages . . . . . . . . . . . . . . . . . . . . . . . . . . 98Adding Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 98Saving Web Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Downloading Audio, Video, and Pictures . . . . . . . . . . 99Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Opening Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Playing an Audio Track . . . . . . . . . . . . . . . . . . . . . . . 101Managing Music Playlists . . . . . . . . . . . . . . . . . . . . . 103Playing a Music Playlist . . . . . . . . . . . . . . . . . . . . . . 104Saving Audio Files . . . . . . . . . . . . . . . . . . . . . . . . . . 106Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Opening Camera Application . . . . . . . . . . . . . . . . . . 107Using the Front and Back Camera Lens . . . . . . . . . . 108Using the Camera Control Keys . . . . . . . . . . . . . . . . 108Taking Still Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . 109Selecting Camera Settings . . . . . . . . . . . . . . . . . . . . 109Recording Video Clips . . . . . . . . . . . . . . . . . . . . . . . . . 110Using Self-Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110Available Memory Indicator . . . . . . . . . . . . . . . . . . . . 111

8DraftSwitching to Pictures . . . . . . . . . . . . . . . . . . . . . . . . 111Switching to Video . . . . . . . . . . . . . . . . . . . . . . . . . . 111Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112Opening Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112Playing a Video Clip . . . . . . . . . . . . . . . . . . . . . . . . . 113Playing Streaming Video and Audio . . . . . . . . . . . . . 114Saving Video Clips . . . . . . . . . . . . . . . . . . . . . . . . . . 115Sending Video Clips . . . . . . . . . . . . . . . . . . . . . . . . . 115Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Opening Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Viewing Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117Viewing Slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . 118Editing Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Sending Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Specific Absorption Rate Data . . . . . . . . . . . . . . . . . . . 121Motorola Limited Warrantyfor the United States and Canada . . . . . . . . . . . . . . . . 123Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

9PRELIMINARYSafety and General InformationSafety and General InformationIMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR PHONE.The information provided in this document supersedes the general safety information in user’s guides published prior to December 1, 2002.Exposure To Radio Frequency (RF) EnergyYour phone contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits.Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.Operational PrecautionsTo assure optimal phone performance and make sure human exposure to RF energy is within the guidelines set forth in the relevant standards, always adhere to the following procedures.External Antenna CareUse only the supplied or Motorola-approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone.Do NOT hold the external antenna when the phone is IN USE. Holding the external antenna affects call quality and may cause the phone to operate at a higher power level than needed. In addition, use of unauthorized antennas may result in non-compliance with the local regulatory requirements in your country.

10PRELIMINARYPhone OperationWhen placing or receiving a phone call, hold your phone as you would a wireline telephone. Body-Worn OperationTo maintain compliance with RF energy exposure guidelines, if you wear a phone on your body when transmitting, always place the phone in a Motorola-supplied or approved clip, holder, holster, case, or body harness for this phone, if available. Use of accessories not approved by Motorola may exceed RF energy exposure guidelines. If you do not use one of the body-worn accessories approved or supplied by Motorola, and are not using the phone held in the normal use position, ensure the phone and its antenna are at least 1 inch (2.5 centimeters) from your body when transmitting.Data OperationWhen using any data feature of the phone, with or without an accessory cable, position the phone and its antenna at least 1 inch (2.5 centimeters) from your body.Approved AccessoriesUse of accessories not approved by Motorola, including but not limited to batteries and antennas, may cause your phone to exceed RF energy exposure guidelines. For a list of approved Motorola accessories, visit our website at www.Motorola.com.RF Energy Interference/CompatibilityNote: Nearly every electronic device is susceptible to RF energy interference from external sources if inadequately shielded, designed, or otherwise configured for RF energy compatibility. In some circumstances your phone may cause interference.FacilitiesTurn off your phone in any facility where posted notices instruct you to do so. These facilities may include hospitals or health care facilities that may be using equipment that is sensitive to external RF energy.

11PRELIMINARYAircraftWhen instructed to do so, turn off your phone when on board an aircraft. Any use of a phone must be in accordance with applicable regulations per airline crew instructions.Medical DevicesPacemakersPacemaker manufacturers recommend that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless phone and a pacemaker.Persons with pacemakers should:•ALWAYS keep the phone more than 6 inches (15 centimeters) from your pacemaker when the phone is turned ON.•NOT carry the phone in the breast pocket.•Use the ear opposite the pacemaker to minimize the potential for interference.•Turn OFF the phone immediately if you have any reason to suspect that interference is taking place.Hearing AidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.Use While DrivingCheck the laws and regulations on the use of phones in the area where you drive. Always obey them.

12PRELIMINARYWhen using your phone while driving, please:•Give full attention to driving and to the road.•Use handsfree operation, if available.•Pull off the road and park before making or answering a call if driving conditions so require.Responsible driving best practices may be found in the “Wireless Phone Safety Tips” at the end of this manual and at the Motorola website: www.Motorola.com/callsmart.Operational WarningsFor Vehicles With an Air BagDo not place a phone in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a phone is placed in the air bag deployment area and the air bag inflates, the phone may be propelled with great force and cause serious injury to occupants of the vehicle.Potentially Explosive AtmospheresTurn off your phone prior to entering any area with a potentially explosive atmosphere. Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Areas with potentially explosive atmospheres are often but not always posted.Blasting Caps and AreasTo avoid possible interference with blasting operations, turn OFF your phone when you are near electrical blasting caps, in a blasting area, or in areas posted “Turn off electronic devices.” Obey all signs and instructions.

13PRELIMINARYBatteriesBatteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. Use only Motorola original batteries and chargers.Your battery or phone may contain symbols, defined as follows:Seizures/BlackoutsSome people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when watching television or playing video games. These seizures or blackouts may occur even if a person never had a previous seizure or blackout.If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult with your doctor before playing video games on your phone or enabling a flashing-lights feature on your phone. (The flashing-light feature is not available on all products.)Symbol DefinitionImportant safety information will follow.Your battery or phone should not be disposed of in a fire.Your battery or phone may require recycling in accordance with local laws. Contact your local regulatory authorities for more information.Your battery or phone should not be thrown in the trash.Your phone contains an internal lithium ion battery.LiIon BATT

14PRELIMINARYParents should monitor their children's use of video game or other features that incorporate flashing lights on the phones. All persons should discontinue use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation.To limit the likelihood of such symptoms, please take the following safety precautions:•Do not play or use a flashing-lights feature if you are tired or need sleep.•Take a minimum of a 15-minute break hourly.•Play in a room in which all lights are on.•Play at the farthest distance possible from the screen.Repetitive Motion InjuriesWhen you play games on your phone, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. Follow these instructions to avoid problems such as tendonitis, carpal tunnel syndrome, or other musculoskeletal disorders:•Take a minimum 15-minute break every hour of game playing.•If your hands, wrists, or arms become tired or sore while playing, stop and rest for several hours before playing again.•If you continue to have sore hands, wrists, or arms during or after play, stop playing and see a doctor.

15PRELIMINARYEuropean Union ConformanceEuropean Union Directives Conformance StatementHereby, Motorola declares that this product is in compliance with• The essential requirements and other relevant provisions of Directive 1999/5/EC• All other relevant EU DirectivesThe above gives an example of a typical Product Approval Number.You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the web site.IMEI: 350034/40/394721/90168Type: MC2-41H14

16DraftGetting StartedGetting StartedWhat’s in the Box?Your multimedia communicator comes with a:•Rechargeable battery•Rapid charger and regional adapter•Desktop charging station•Stylus•Stereo headset with send/end key•CD-ROM with PC sync software, downloadable media files, utilities, and various applications•USB data cable•Removable memory card with SD/MMC adapter (see Note)•Protective carrying case (see Note)•User documentationNote: The in-box items may vary by country. Contact 3 for more details.You can customize your communicator for maximum performance and portability. To buy Motorola Original™ accessories, contact the Motorola Customer Call Center at 1-800-331-6456 in the United States or 1-800-461-4575 in Canada.

17DraftGetting StartedFor more information, visit:www.motorola.com (United States)www.motorola.ca (Canada)About this GuideThis user’s guide describes the basic features in your multimedia communicator.Note: A More Here reference guide for your communicator is provided on the in-box CD that describes your communicator’s features in more detail.Optional Features Optional AccessoriesThis label identifies a feature that requires an optional Motorola Original™ accessory.Installing the USIM CardYour USIM (Universal Subscriber Identity Module) card contains your phone number, service details, and phonebook/message memory.This label identifies an optional network, USIM, or subscriber-dependent feature that may not be offered by all service providers in all geographical areas. Contact your service provider for more information.

18DraftGetting StartedCaution: Do not bend or scratch your USIM card. Avoid exposing your USIM to static electricity, water, or dirt.Action1Push down the release latch, and slide the back cover down to remove it.2Slide the USIM card door toward the top, then lift upward to open.3Insert the USIM card into the tray (gold plated contacts facing down, and notch to the right).Release LatchUSIMCardNotch

19DraftGetting StartedInstalling the Memory CardThe memory card lets you an store multimedia files, such as audio clips, pictures, and video clips.4Close the USIM card door, then slide downward to lock, as shown on the door and in the illustration.Action1If back cover is on, remove it as described in the procedures.2Slide the memory card door to the left, as shown in the illustration, and lift open.3Insert the memory card into the tray (gold plated contacts facing down, and notches to the right).4Close the memory card door, then slide downward to lock it.ActionMemoryCard

20DraftGetting StartedBattery UseBattery performance depends on many factors including your wireless carrier’s network configuration; signal strength; the temperature at which you operate your phone; the features and/or settings you select and use; items attached to your phone’s accessory connector port; your voice, data, and other application usage pattern.Caution: To prevent injuries or burns, do not allow metal objects to contact or short-circuit the battery terminals.To maximize your battery’s performance:•Always use Motorola Original™ batteries and battery chargers. The phone warranty does not cover damage caused by using non-Motorola batteries and/or battery chargers.•New batteries or batteries stored for a long time may require a longer charge time.•Maintain the battery at or near room temperature when charging.•Do not expose batteries to temperatures below -10°C (14°F) or above 45°C (113°F). Always take your phone with you when you leave your vehicle.•When you do not intend to use a battery for a while, store it uncharged in a cool, dark, dry place, such as a refrigerator.•Batteries gradually wear down and require longer charging times. This is normal. If you charge your battery regularly and notice a decrease in talk time or

21DraftGetting Startedan increase in charging time, then it is probably time to purchase a new battery.The rechargeable batteries that power this phone must be disposed or properly and may need to be recycled. Refer to your battery’s label for battery type. Contact your local recycling center for proper disposal methods.Warning: Never dispose of batteries in a fire because they may explode.Installing the BatteryUse only Motorola Original™ batteries and accessories. Store batteries in their protective cases when not in use.Action1Remove the battery from its plastic bag2If the back cover is on, remove it as described in the procedures.3Insert the battery under the tab and push down.

22DraftGetting StartedCharging the Battery using the Travel ChargerNew batteries are shipped partially charged. Before you can use your communicator, you need to install and charge the battery, as indicated by the following instructions. Some batteries perform best after several charge/discharge cycles. 4Replace back cover and slide into place until it locks.Action1Plug the charger in with the release tab up.2Plug the other end into an electrical outlet. While the battery is charging, Charging Battery and the battery’s current charge level (Very Low to High) display on the screen.3When Charging Complete displays, press the release tab and remove the charger.Action

23DraftGetting StartedCharging the Battery using the Desktop Charging CradleTurning Your Communicator On and OffAfter you turn the communicator on, your personal home page displays after the startup sequence (see page 38).Action1Plug the travel charger, release tab end, into the back of the charging cradle with the release tab up.2Plug the other end into an electrical outlet. Slide switch down for 1 second to turn on or off.

24DraftGetting StartedSetting Up Your Communicator for the First TimeWhen you turn on the communicator for the first time, you need to:•Install the A1000 Desktop Suite from the in-box CD. See page 72 for set up and installation procedures.•Select primary and secondary languages •Calibrate the screen for accurate screen taps (see page 67).•Set time and date (see page 88).Making and Answering CallsTo make and answer calls, your communicator must:•be turned on•have a USIM card installed•have a network connection with adequate signal strength

25DraftGetting StartedMaking a CallAnswering a CallWhen you receive a call, the communicator rings or vibrates (unless set to Silent mode).Action1PressA or tap .2Select a voice or video call by tapping: voice call video call3Use the stylus to tap the number you want to dial on the keypad.4Press B.5Press a to turn on the speakerphone during the call (see page 42).Note: You must be in an active call to use the speakerphone.6To end the call, press A.Action1Press B or tap Answer.2To end the call, press A.

26DraftUsing Your CommunicatorUsing Your CommunicatorSee page 1 for a basic phone diagram.Communicator DisplayApplication Selector BarShows six icons that allow easy to access to commonly used applications.Menu BarShows menus for the open application.Application SpaceShows the open application.Button BarShows buttons you can select in the open application.Status BarShows communicator status information.Application SpaceApplication Selector BarMenu BarButton BarStatus Bar

27DraftUsing Your CommunicatorUsing Touchscreen ControlThe stylus fits in a compartment on the side of the communicator. Using the stylus, tap once on an icon, text, or on-screen button to select and open an item.Using the 8-way Navigation KeyYo u c an press the navigation key up, down, left, or right to highlight an item. Press the center key to select the highlighted item.Note: This guide describes how to use touchscreen control to use the features. In most cases, it does not include the equivalent 8-way Navigation key for using the feature.Using the 3 KeyThe 3 key (E) provides access to unique features from 3. See the 3 welcome package for more details.•Press to open the browser.•Press and hold for 3 seconds to go to My Shortcut.Note: The default shortcut is Home. To change the shortcut, see page 68.Navigation Key3 Key

28DraftUsing Your CommunicatorUsing the Game KeysGame Key A and Game Key BThese keys are used when you play games on your communication. The action of each key varies depending on the game being played.Tip: You can press Game Key A (A) to open the first (leftmost) menu in the menu bar. Press Aagain to close the menu.Opening ApplicationsYour communicator has many built-in applications for communications, personal organization, and entertainment. Each application has an associated icon.You can open an application in the following ways:•Select an icon in the Application Selector bar.•Select . The Application Launcher displays, showing icons of all of your communicator’s applications. Select the application you want to open.Note: You don’t have to save and close an application before going to another. Changes or entries in the opened application are automatically saved.Game Key A Game Key B

29DraftUsing Your CommunicatorThe following icons open the communicator applications:Calendar(see page 81)Messaging(see page 50)Calculator(see page 81)Phone(see page 41)Desktop Suite(see page 74)Time(see page 88)Contacts(see page 58)To d o(see page 84)Control Panel(see page 66)Browse(see page 97)Notes(see page 88)Pictures(see page 116)Music(see page 100)Camera(see page 107)Video(see page 112)Home(see page 38)SyncML(see page 75)Picsel Viewer(see page 100)SimApps(see page 120)Voice(see page 92)

30DraftUsing Your CommunicatorFoldersMany applications include a group of folders. The current folder name appears on the right side of the menu bar at the top of the screen. You can use folders to organize your entries. For example, you can create separate folders for business and personal entries.Switching FoldersTap the current folder name, then select a folder from the list. To view every entry in every folder, select All.Filing New Entry in FolderAction1In the application, select a folder.2Create a new entry. The entry is automatically assigned to the folder.

31DraftUsing Your CommunicatorMoving Entry to a Different FolderAdding, Renaming, and Deleting FoldersStatus IndicatorsThe status bar at the bottom display the following status indicators:Clock – Shows the current time. Tap clock to briefly display the date.Action1Open the entry.2Select a different folder. The entry is moved to the folder.Action1Tap the current folder, then select Edit folders.2To add a new folder, tap Add.To rename a folder, tap Rename.To remove a folder, tap Delete.Keyboard LauncherPhoneClockAlert ModeLocation Mode MessageBattery StrengthSignal StrengthNetworkBluetooth Status

32DraftUsing Your CommunicatorKeyboard Launcher – Tap to display the on-screen keyboard. (The keyboard displays only when the cursor is in a text-entry field.)Alert Mode – Shows the current alert mode:Audio: Vibrate: Silent: The alert mode indicates how the communicator notifies you of an incoming call or message. To change the alert mode, tap the indicator, then select a new setting.Bluetooth Status – Shows the current Bluetooth status:On: White Off: GrayTip: You can tap the icon, then select to turn on or turn off Bluetooth (see page 72).Location Mode – Shows if the GPS (Global Positioning System) Location service is off, idle (in standby), or busy (requesting location information). The color indicates the Location mode:Off: Gray Idle: White Busy: GreenTo turn the Location service on or off, tap the indicator, then select the setting you want. The Location service allows you to track your current location on the communicator screen.Phone – Shows the status of an active call: Connected: Muted:

33DraftUsing Your CommunicatorWhen not in an active call:Voicemail waiting: Videomail waiting: Note: Videomail may not be offered by all service providers in all geographical areas. Message – Shows that you have a new message and the type of message:Email: SMS: MMS: If an MMS or SMS message sender’s phone number is in your Contact list, the indicator is white. If the sender’s phone number is not in your Contact list, the indicator is amber. If multiple types of new messages are available, displays.Network – Shows the type of network service connection: No service: (gray)Emergency service: (red)Connected to GSM home network: (one green segment)Connected to GPRS home network: (two green segments)Connected to 3G home network: (three green segments)Roaming to non-home type network: (three amber segments)Airplane mode (phone disabled):

34DraftUsing Your CommunicatorTo turn Airplane mode on or off, tap the indicator, then select the setting you want (see page 49).Signal Strength – Shows the network signal strength. The more bars, the stronger the network signal.Battery Strength – Shows the amount of charge in your battery. The more bars, the greater the charge. The indicator is amber when the communicator is using a large amount of battery power, such as during a video call. When displays, the battery is charging, and when displays, the battery cannot receive a charge.Entering TextTwo text entry methods make it easy to enter names, numbers, and text messages on your communicator.Handwriting RecognitionNote: You can use the handwriting pad only when the screen cursor is in a field that allows you to enter text.You can use the stylus as a pen to write letters, numbers, and punctuation. To write with the stylus, tap in the status bar. The handwriting pad or the keyboard displays

37DraftUsing Your Communicatorcannot establish a view of a wide area of open sky. In these cases, the AGPS feature will not work. Such situations include, but are not limited to, the following: •in underground locations•inside of buildings, trains, or other covered vehicles•under any other metal or concrete roof or structure•between tall buildings or under dense tree cover•near a powerful radio or television tower•when your AGPS antenna is covered (for example, by your hand or other object) or facing the ground•when there are temperature extremes outside the operating limits of the phoneEven where location information can be calculated in such situations, it may take more time than usual, and your location estimate may not be as accurate. Walking or driving very slowly may also substantially reduce AGPS performance. Even where adequate signals from multiple satellites are available, your AGPS feature will provide only an approximate location, often within 150 feet (45 meters) but sometimes much farther from your actual location. The satellites used by your phone's AGPS feature are controlled by the U.S. government and are subject to changes implemented in accordance with the Department of Defense AGPS user policy and the Federal Radio Navigation Plan. These changes may affect the performance of your phone's AGPS feature.

38DraftHome ScreenHome ScreenThe Home screen shows a variety of content. This could be a summary of your appointments, messages, and personal links to content such as news, entertainment, and sports.Displaying the Home ScreenThe Home screen displays after the startup sequence when you turn on the communicator. You can also display the Home screen by tapping in the Application Selector bar.Screen ContentsInformation SnacksPersonal InformationApplication ShortcutsApplication Selector Bar

39DraftHome ScreenInformation Snacks – Shows the three most recently received information snacks (headlines). Tap a snack to go to a Web page with more information.Note: See the 3 welcome package for information about information snacks.Personal Information – Shows information you want displayed in your Personal Information section. Depending on the items you select, this section shows the number of new voicemail, messages, appointments, and active tasks you have.Application Shortcuts – Shows 3 icons for fast access to your favorite applications.

40DraftHome ScreenPersonalizing Home ScreenNote: To receive updated information from 3, tap Contents tab, then tap Update. Refer to the 3 package for more details.Action1Go to the Home screen (if not already shown).2Tap Home>Preferences.3Tap Events tab.4Select up to six items you want displayed in the Personal Information section by tapping the appropriate checkbox.Note: When six items are already selected, the other items are no longer selectable. To change or add a selection, you must remove the checkmark from a currently selected item.5Tap Applications tab.6Select the three applications you want displayed in the Applications Shortcuts section, then tap Done.

41DraftCalling FeaturesCalling FeaturesOpening Phone ApplicationUse the Phone application to make voice and video phone calls. You can open this application in the following ways:•Press B. When the Phone application opens, a list of the most recently dialed calls displays.•Press A or tap in the Application Selector bar or Application Launcher. When the Phone application opens, the dialing keypad displays:Tap keys to dial numberTap to erase last digitDisplayTap to place voice callTap to switch between keypad and call listTap to place video call

42DraftCalling FeaturesDisplaying Your Phone NumberYour phone number must be programmed on your USIM card to use this feature. Tap in the Application Selector bar. Tap Phone > My line(s). The communicator shows your phone number(s). Using the Internal SpeakerphoneTo turn on the internal speakerphone during an incoming or active call, pressa.Adjusting the VolumePress the top of the volume key to increase volume or the bottom of the key to decrease volume for the earpiece, speakerphone, or headset during a call. Speakerphone KeySpeakerphone PortVolume Keys

43DraftCalling FeaturesMaking a Voice CallDialing with the KeypadDialing Stored Phone NumbersYou can automatically dial stored phone numbers (see page 58)Redialing Failed Voice CallsIf a voice call fails (busy or not answered), Call Failed displays. To redial the call, tap the Retry button.Making a Video CallYou can make video calls to other devices that have video call capabilities.Action1Tap in the Application Selector bar or Application Launcher.2Select a voice call by tapping ( )3Tap the phone number on keypad.4If you make a mistake while dialing, tap to delete the last digit entered. Tap and hold to delete multiple or all digits.5Press B to make the call.

44DraftCalling FeaturesMaking a Video Call to Another PhoneYou can make a video call to another phone by dialing the phone number on the keypad.Shortcut: You can automatically place video calls to stored phone numbers.Action1Tap in the Application Selector bar or Application Launcher.2Position the front camera lens or P2P (point-to-point) lens so that it faces the image you want to send, (see page 108.)Note: The speakerphone automatically turns on during a video call.3Tap the phone number on keypad.If you make a mistake while dialing, tap to delete the last digit. Tap and hold to delete multiple or all displayed digits.

45DraftCalling FeaturesMaking a Video Call to a ComputerTo make a video call to a computer, you can use:• Call History List – To call a computer in your call history list, tap the email address you want to call.• Contacts – To call stored phone numbers, see page 58.4Ta p .When the call connects, the screen shows the remote camera image on top and the local image on the bottom.ActionRemote imageLocal image

46DraftCalling Features• Embedded email address – To call a computer’s email address, tap the address in an email, SMS, MMS, or text message, or an HTML page.Calling an Emergency NumberYour service provider may program one or more emergency phone numbers, such as 911 or 112, that you can call under any circumstances, even when your communicator is locked or the USIM card is not inserted.Your service provider can program additional emergency numbers into your USIM card. However, your USIM card must be inserted in your phone in order to use the numbers stored on it. See your service provider for additional information on this issue.Note: Emergency numbers vary by country. Your communicator’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.Using AGPS During an Emergency CallWhen you make an emergency call, your phone's assisted-Global Positioning System (AGPS) feature can calculate your approximate location and help emergency service personnel find you.

47DraftCalling FeaturesNotes: •This feature can work only if the emergency response center can receive and process location information. If you are concerned about whether your local emergency response center can receive AGPS location information, contact your local authorities.•In order for the AGPS feature to work when making emergency calls, the service must be turned on (see page 32).For best results, you should be located where your phone’s antenna can establish a clear view of the open sky. This allows your phone to access AGPS satellite signals. Even under good conditions, it may take 30 seconds or more to determine your approximate location. This time increases and the accuracy of the results decreases with reduced access to satellite signals.If your communicator does not have access to AGPS satellite signals, the location of the nearest cell tower in contact with your phone is automatically provided to the emergency response center. Because of the limitations of the AGPS feature, always provide your best knowledge of your location to the emergency response center, just as you would when using a phone without AGPS capabilities. Also, remain on the phone for as long as the emergency response center instructs you.

48DraftCalling FeaturesDialing the CallAnswering CallsWhen you receive an incoming voice or video call, the communicator rings or vibrates (unless set to Silent mode).Notes: Video calls display to the left of the call.Action1Press keypad keys to dial the emergency number.2Press B to call the emergency number.ActionPress B or tap Answer to answer the call.Note: Pressato turn on the speakerphone.If you do not want to accept the call, pressA or tap Busy.

49DraftCalling FeaturesSwitching to Airplane ModeIf you want to use the commuicator’s personal organization and entertainment features in a situation where telephone use is not allowed (such as on a plane), switch the communicator to Airplane mode. In Airplane mode, you cannot connect to the network to make phone calls or send messages. Also, Bluetooth and GPS Location service are not available.Turning off Call RingingYou can turn off ringing for incoming calls by setting the communicator’s alert mode to vibrate or silent (see page 32).Action1Tap the Network indicator ( ) in the Status bar.2In the Connection Mode box, tap Aeroplane Mode.3Ta p Done. displays when the communicator is in Airplane mode.4To return to normal operation, tap , then tap Handset On.

50DraftMessages and EmailMessages and EmailYou can create, send, and receive email, MMS (Multimedia Message Service), and SMS (Short Message Service) messages. To send stored audio, video, and picture files with your email and MMS messages. See the “News and Entertainment” beginning on page 97.Setting up Messaging AccountsBefore you can send and receive messages, you must set up your accounts. Contact your service provider for account details.EmailTo send and receive email, you must set up an Internet account and an email accountThe communicator supports IMAP4, POP3, and SMTP protocols.To create an Internet account:Action1Open Control Panel application ( ).2Tap Connections tab > Internet accounts > Accounts tab.3Tap New.

51DraftMessages and EmailTo create an email account:Note: See the A1000 More Here reference guide on the in-box CD for more information.MMS and SMSYour service provider should already have set up MMS and SMS (text messages) accounts on your communicator.To check account settings:4Enter information about your account.5Ta p Done.Action1Open Control Panel application ( ).2Ta p Connections tab > Messaging accounts > Email tab.3Ta p New. 4Enter information about your account on the Basic, Inbox, Outbox, and Advanced tabs.5Ta p Done.Action1Open Control Panel application ( ).2Ta p Connections tab > Messaging accounts.Action

52DraftMessages and EmailOpening Messaging ApplicationUse the Messaging application to create, send, and receive messages.3Tap the Email, Text message, Multimedia message, or Info Service tabs to view account settings. Tap the left and right arrows to move between the account tabs.ActionTap in the Application Selector bar or Application Launcher. When the Messaging application opens, it shows a list of your established accounts.Note: The account stores data received using Bluetooth (see page 72).Action

53DraftMessages and EmailCreating and Sending MessagesEmail and SMSAction1Tap the email or SMS account in the list of accounts.2Ta p Message > New.3Ta p Text only, Media only, or Text & media, then tap Done.4In the To field, enter the recipient’s address (email) or phone number (SMS).To enter a stored address or phone number from Contacts, tap To.To enter several addresses or phone numbers, enter a comma between each.5In the Subj field (email only), write a subject line.6In the text area, write the text message.7To add an attachment, tap the tab, then tap Add.8In the Type field, select the file type you want to attach, then tapDone.9Tap the stored file you want to attach, then tap Add.Note: You cannot send or forward media files that are forward-locked.10When message is complete, tap Send.

54DraftMessages and EmailNote: If you accept a video call while composing an email or SMS message, the message is automatically saved to either the email or SMS draft folder.MMSYou can create and send MMS messages that contain one or more slides with audio, video, images, and documents. Action1Tap the MMS account in the list of accounts.2Tap Message > New.3Tap Text only, Media only, or Text & media, then tap Done.The first slide of the message displays:Image areaText areaDuration label

56DraftMessages and EmailNotes: •The maximum file size of an MMS message is 30 KB. If you exceed this size, a warning message displays. Remove audio or video files to reduce the file size.•If you accept a video call while composing and email or SMS message, the message is automatically saved to either the email or SMS draft folder.8To set the slide duration, tap the duration label (10/10s). Specify how long (in seconds) you want the slide to play before automatically advancing to the next slide in the message.The first number in the duration label indicates the duration of the current slide. The second number indicates the total duration of all slides in the message.9To add another slide to the message, tap .10To play the slide presentation, tap Play.11When message completes, tap Send. Action

57DraftMessages and EmailReceiving and Reading MessagesWhen a new message is received, a message indicator displays in the status bar (see page 31).Action1Tap the message indicator in Status bar.The Messaging application opens, showing a list of established accounts. The number of unread messages displays next to each account.2Tap the account containing the message you want to read.A list of messages displays. Unread messages display in bold.3Tap the message you want to read.4Attachments display with a . Tap the attachment to open it.

Draft58Contact ListContact ListUse the Contacts application to store details such as names, phone numbers, and email addresses in an alphabetical list of entries. You can call or send a message to any stored contact from this list.Opening Contacts ApplicationTap in the Application Selector bar or Application Launcher. An alphabetical list of stored contacts displays:The following icons can display next to a contact name: – Displays if contact has a voice tag assigned to a phone number (see page 62). – Displays if contact is saved in the USIM folder.

Draft59Contact ListTo see each contact’s preferred phone number next to their name, tap Edit >Preferences, then tap the Show preferred phone number tab.Adding ContactsAction1Open the folder in which you want to save the contact. To store the contact on your USIM card, open the USIM folder.2Ta p Contacts >New to display the Contact information form.3Enter contact name, phone numbers, email address, and other information.

Draft60Contact ListNote: If you enter more than one phone number, (for example, a work and home number), you can select which number displays in the contact list as the preferred phone number. To do so, tap Edit>Preferred number, then select the desired preferred phone number from the list.4Tap preceding each phone number to select its communication method: Phone (land line), Mobile, Email, Web, or Web call (email address for 2-stage dialing video call).5To record a voice tag, refer to “Recording Voice Tags for Contacts” on page 62.6To assign a unique ring tone to the contact, tap the down arrow, if necessary, then tap the Ring tone box.7Select a tone from the list. When you receive a voice or video call from this contact, the selected ring tone plays.8Tap to play the selected ring tone.9To add a new field to the contact, tap Edit > Add Field. “Adding New Fields” on page 61.Note: This step is optional. However, the fields must be added when entering the contact information. You can not add new fields after you save the contact. Action

Draft61Contact ListAdding New Fields10To add a note to a contact, tap , then enter the note.11You can mark a note as Private. Private notes are not included when you send or synchronize contact details.12To assign a stored photo or image to the contact, tap , then , then select the photo or image.ortap to take a photoThe contact’s assigned image displays when you make a call to or receive a call from the contact.13When you have entered all contact information, tap .The contact now displays in the alphabetical list of contact names.Action1When entering information for a new contact, tap Edit >Add field.2Ta p New Field, then the field from the list.Action

Draft62Contact ListRecording Voice Tags for ContactsYou can record a voice tag when adding a new contact (page 59), or when editing a contact (page 64).Note: The contact must have at least one phone number entered to assign a voice tag.You can record a voice tag for all phone numbers for a contact. However, each phone number must have a unique voice tag.Tip: Make your recording in a quiet location. Hold the communicator about 4 inches (10 centimeters) from your mouth, and speak directly into the communicator in a normal tone. 3Tap Add.The Contact Information form displays and (new field) displays next to the added field.4Repeat these steps to add more fields.Action1When adding or editing a contact, tap the Voice tag box under the phone number.2When prompted, tap Record and speak the desired voice tag.Action

Draft63Contact ListDeleting Voice Tags3When prompted, tap Record again and repeat the voice tag.A checkmark (o) in the Voice tag box indicates the voice tag has been recorded.4Tap the field next to the Voice tag box, then select Voice call or Video call.5Repeat these steps to record additional voice tags for this contact.Action1Tap in the Application Selector bar or Application Launcher to display your list of contacts.2Tap a contact in the list.3Ta p Edit >Edit Contact.4Tap the Voice tag box for the tag you want to delete.5Ta p Yes.Action

Draft64Contact ListEditing ContactsCommunicating with ContactsYou can easily phone, email, or send messages to your stored contacts.Action1Tap in the Application Selector bar or Application Launcher to display your list of contacts.2Tap a contact in the list.3Tap Edit >Edit Contact.Note: Your changes are automatically saved.Action1In the list of contact entries, tap the contact name. The contact’s defined phone numbers and email addresses display:

Draft65Contact ListUsing Voice DialingPress and release a (speakerphone key) then say the recorded voice tag within 2 seconds.A phone number or email address might have additional icons next to it, depending on its defined communication method.2Tap the icon for the call or message you want:or Voice Call to a phoneVideo Call to a phone or computer (for phone number contacts)Video Call to a computer (for email address contacts)Email message to a phone or computerMMS message to a phone or computerSMS message to a phoneActionSpeakerphone KeySpeakerphone Port

66DraftCustomizing Communicator SettingsCustomizing Communicator SettingsSetting the Wallpaper ImageYou can set an image to display in the background of the Application Launcher.Setting the Screen BrightnessAction1Open Application Launcher ( ).2Tap View > Appearance.3Tap Background and select from the list, or select Find image to select a stored image.4Tap Done.Action1Open Control Panel application ( ).Note: Tap Screen from the Handset tab.2Slide the Brightness switch button to the desired setting.3Tap Done.

67DraftCustomizing Communicator SettingsSetting the Screen CalibrationSetting the Volume for System SoundsSet the volume level for screen taps, button presses, alerts, and system notices.Action1Open Control Panel application ( ).2Ta p Screen from the Handset tab.3Ta p Calibrate.4When prompted, tap the center of points 1, 2, and 3 to calibrate the screen.orPress the center of the screen to reset calibration to the factory default setting.orPress S in any direction to exit without making changes.5Ta p Done.Action1Open Control Panel application ( ).2Ta p Sound from the Handset tab.3Select desired settings for button clicks, screen taps, ringer, and alert mode.4Ta p Done.

68DraftCustomizing Communicator SettingsSetting a 3 Key ShortcutThe 3 key (E) has 1 default shortcut setting, Browser, and one shortcut that you can customize to open your favorite application, for example, Camera.Choosing Ring TonesWhen you set the alert mode to audio, the communicator rings during an incoming call or message (see page 32).Personalized ring tones assigned to stored contacts override the ring tones you select here (see page 59).Choosing Ring Tones for CallsAction1Open Control Panel application ( ).2Tap Shortcut key from the Handset tab.3Select an application from the list.4Tap Done.Action1Open the Phone application ( ).2Tap Settings > Tones.3Select the ring tones you want for line 1, line 2 (if applicable), video, voicemail, and videomail. To hear the selected ring tone, tap .4Select a setting for Keypad tones.5Tap Done.

69DraftCustomizing Communicator SettingsChoosing Ring Tones for MessagesChoosing a Vibrate PatternWhen you set the alert mode to vibrate, the communicator vibrates to indicate an incoming call or message. You can select from the different vibrate patterns provided.Note: See page 32 to view and set the alert mode.Action1Open the Messaging application ( ).2Ta p Edit > Preferences.3Select the ring tones you want for each messaging account.To hear the selected ring tone, tap .4Ta p Done.Action1Open Control Panel application ( ).2Ta p General tab.3Ta p Ringtune Manager.4Tap the Vibrate tab.5Tap the vibrate pattern you want to use. To test the pattern, tap the left arrow.6Ta p Done.

70DraftCustomizing Communicator Settings

71DraftGetting More Out of Your CommunicatorGetting More Out of Your CommunicatorInstalling the A1000 Desktop SuiteImportant: Before connecting your communicator to another device such as a computer or Bluetooth device, install the A1000 Desktop Suite, located on the in-box CD. Follow the on-screen prompts for installation instructions. This program enables you to establish a connection with a computer or Bluetooth device to:•Synchronize email and Calendar, Contacts, and To Do entries between your communicator and a computer•Back up and restore information between your communicator and a computer•Transfer files between your communicator and a computer•Install applications on your communicator

72DraftGetting More Out of YourCommunicatorConnecting a Bluetooth DeviceImportant: Before connecting your communicator to a Bluetooth device, set up the other device as described in its user guide. Action1Open Control Panel application ( ) 2Tap Connections tab > Bluetooth.3Tap the Devices tab, then tap Add.Your communicator searches for all Bluetooth enabled devices in the vicinity.orTap Show, select from the list of available devices, then tap Refresh,4In the list of available devices, tap the one you want to bond.If prompted, enter a passkey, then tap Done. A passkey is a set of numbers or letters (at least four characters) that you agree to exchange with the owner of the other device. When the communicator accepts the passkey, the bonding process completes.

73DraftGetting More Out of Your CommunicatorChanging Your Bluetooth SettingsReceiving Items settings determine what your communicator does when it receives information from connected Bluetooth devices.Action1Open Control Panel application ( ) 2Ta p Connections tab >Bluetooth >Settings tab.3To turn on Bluetooth, tap the box next to Bluetooth on. A check mark in the box indicates Bluetooth hardware is turned on.4Tap a selection in Visible for other devices.5You can change your Receiving itemssettings (see below), and enter a Bluetooth name for your communicator.6Ta p Done.Setting DescriptionAlways receive accepts the informationAsk firstprompts you to accept the informationNever receiverejects the information

74DraftGetting More Out of YourCommunicatorConnecting to a ComputerImportant: Before connecting your communicator to a computer, ensure the A1000 Desktop Suite, located on the in-box CD has been installed.Setting Up a USB Cable ConnectionConnect the USB cable from the accessory port on the bottom of the communicator to the USB port on the computer. To complete the connection, tap (Desktop Suite) in the Application Launcher, then tap Connect.Setting Up a Bluetooth ConnectionAction1Make sure the PC is Bluetooth enabled, then establish a connection as described on page 72.2Open Control Panel application ( ) 3Tap Connections tab >Desktop Suite.4In the Link using, field tap Bluetooth.5To select a Preferred PC, tap the box next to it, then tap Done.6To complete the connection, tap (Desktop Suite) in the Application Launcher and tap Connect.

75DraftGetting More Out of Your CommunicatorUsing the Desktop SuiteAfter connecting your communicator to the computer, start the A1000 Desktop Suite program on the computer. Refer to the A1000 Desktop Suite online help for more information about using the program.Using Remote SynchronizationThe communicator allows you to synchronize Calendar, To Do, and Contract entries over the air (OTA) with a synchronization server. It is designed to synchronize with basic features of the initial release of many popular Personal Information Management (PIM) software and hardware products. Setting Up Your AccountTo use remote synchronization, contact your service provider to set up an account. To synchronize over the Web, you also need an Internet account.

76DraftGetting More Out of YourCommunicatorConfiguring the SettingsWhen you have your account information, you can configure the communicator for remote synchronization.Action1Tap ( ).2Tap Edit >Settings.3Enter the Server address, Username, and Password.4Tap Done.5Tap on a task you want to enable.6Tap Enable task checkbox.7Enter the path to the Server database.8Tap Done.9Tap Edit >Settings, then tap the Protocol tab.10Tap Use transporter login checkbox.11Enter a Username and Password.12Tap Done.

77DraftGetting More Out of Your CommunicatorUsing Picsel ViewerPicsel Viewer automatically reformats many popular file formats such as text, presentation, and database management files, to fit in the display area of your communicator. Use Picsel Viewer to open documents from the internet, received messages, and documents stored on your A1000 communicator or personal computer. The stylus and icons allow you to open, scroll, zoom, and navigate through documents with ease.Opening DocumentsAction1Open Picsel Viewer ( ).2Locate the document from your saved Bookmarks, History list, folders, or lists.3Tap on the document name to open it.Document options allows you to display and select options such as send, delete, rename, view history, and bookmarks.

78DraftGetting More Out of YourCommunicatorNavigating DocumentsIcons on the navigation bar allows you to easily zoom in and out, change views, and move to other pages of the document.Navigation Icon Description and ProcedureExpand control bar ()Displays thumbnail images of a document 3 pages at a time. The larger thumbnail indicates the currently displayed page. Tap a thumbnail to display its page. Tap the left arrow twice to go to the first page, tap the right arrow twice to go to the last page.DocumentOptionsNavigationIcons

79DraftGetting More Out of Your CommunicatorFit to width ( ) Display a document to the full width of the viewing area.Fit to page ( ) Display a document to the full width and height of the viewing area.Zoom in ( ) Increase document sizeZoom out ( ) Decrease document sizeDisplay as actual size ( )Display a document or image in its full, original size.Tapping the Expand control bar displays thumbnails for easier navigation. Tap and hold the red box in the thumbnail to move around the current screen.Full screenmode ( )Display a document or image in its full, original size and hides the status and application bars.Rotate screen ( ) Rotate screen horizontally. Tap again to go back to vertical view.Go back ( ) Display previous pageNavigation Icon Description and Procedure

80DraftGetting More Out of YourCommunicatorSetting PreferencesAction1Tap Edit > Preferences.2Make your selections from the list.Page flick – go to the next or previous page in a document by tapping and sliding the stylus across the bottom of the display.•Slide stylus right to go to the previous page•Slide stylus left to go to the next page.Show pictures – available only for HTML and PDF documentsReflow text – reformats documents to fit the width of the display.Keep for – select the number of days documents are kept before they are automatically deleted.Clear history – delete all history documents3Tap the filename to open the document.

81DraftPersonal Organizer FeaturesPersonal Organizer FeaturesCalendarUse Calendar to schedule and organize events such as appointments and meetings. You can review your schedule of events for the day, week, or month, and have the communicator play a reminder alarm for specific events.Note: Ensure the correct time and date are set before using Calendar (page 88).Adding a Calendar EntryYou can enter the following types of Calendar entries:•Appointment – An entry with a start and end time (for example, a meeting)•Reminder – An entry that does not need a time (for example, a birthday)•All day event – An entry with a start and end date, but no specific times. Use an all day event for an entry that lasts a whole day or several days (for example, a conference).

82DraftPersonal Organizer FeaturesTo add a Calendar entry:Action1Open Calendar ( ).2Tap Calendar > New.The Calendar Entry form displays.3Use the stylus or virtual keyboard to enter a description.4Select the type of entry.5Enter the date, time, and location of the event.6Tap the Alarm box if you want the communicator to sound a reminder alarm for this entry.The time and date of the alarm display below the Alarm box. To change when the alarm sounds, tap the time or date.

83DraftPersonal Organizer FeaturesSwitching Calendar ViewsYou can see your Calendar entries in several views: Day, Week, or Month. When you first open Calendar, the Day view displays.To switch to Week, tap .To switch to Month, tap .To switch back to Day, tap .To return to the current day in the selected view, tap .To see the details of an entry, tap the entry.7If this entry recurs, tap Repeat to select a repeat interval. Check the Forever box to have the alarm repeat indefinitely.8To mark this entry as Private when you synchronize Calendar entries with a computer, tap Private.9To add a note to the entry, tap , then enter the note.10Tap to save the entry.Action

84DraftPersonal Organizer FeaturesMoving Entries to the To Do ApplicationYou can move Calendar entries to the To Do application, which lists tasks you need to complete.Notes: To Do entries do not have repeats, times, or locations, so Calendar entries that you move to To Do lose this information. If you copy an entry back to Calendar, the information is not restored. If you move an entry with an alarm, it sounds in To Do.To DoUse the To Do application to list and track tasks you need to complete. You can set due dates for activities, reminder alarms, and mark tasks as completed.Action1Open the entry.2Tap Calendar >Move to To do.

85DraftPersonal Organizer FeaturesAdding Entries:Action1Open To do ().2Ta p To do >New.The To Do entry form displays.3Use stylus or virtual keyboard to enter a description.4Select a priority (1-9, with 1 highest) for the task.5Tap the Due date box if you want to this task to have a due date.The current date displays next to the Due date box. To select a different due date, tap the date, and select a date from the displayed calendar.

86DraftPersonal Organizer FeaturesMarking Tasks as CompleteWhen you open To Do, a list of tasks and their due dates displays. 6Tap the Alarm box if you want the communicator to sound a reminder alarm for this entry. The time and date of the alarm displays below the Alarm box. To change the alarm, tap the time or date.7To mark this entry as Private when you synchronize To Do entries with a computer, tap Private.8To add a note to the entry, tap and enter the note.9Tap to save the entry.ActionTo mark a task as completed, tap the box next to it. The due date disappears, indicating the task is completed.Note: To hide completed entries, tap Edit > Preferences, then remove the check from Display completed.Action

87DraftPersonal Organizer FeaturesDeleting EntriesWhen you no longer need a record of your completed entries, delete them.Moving Entries to CalendarYou can schedule To Do entries on your calendar by moving them to the Calendar application (page 81).Notes: If you do not set a due date for the To Do entry, the communicator uses the current date for the new entry.If you move an entry with an alarm, it sounds in Calendar.ActionTo delete an individual entry, tap the entry in the list and tap Delete.To delete all completed entries, in your list of entries, tap To do > Delete completed.Action1Open the entry.2Ta p To do >Move to Calendar.

88DraftPersonal Organizer FeaturesNotesUse Notes to write notes and sketch graphics.Adding NotesTimeUse Time to set the current time and date, and to set alarms you do not want to include in your Calendar or To Do list.Action1Open Notes ( ).2Tap Notes > New.3Enter the note using the stylus or virtual keyboard.4To add a graphic to the note, tap .5Use the stylus to sketch your graphic.Use the on-screen buttons to change line width and color, and erase lines.6Tap to save the note.

89DraftPersonal Organizer FeaturesSetting the Time and DateIf you have not already set the current time and date:.:Action1Open Time ( ). The Date and Time screen displays:2Ta p Time > Set time & date.3Enter the current time and date.4To set the time and date format, tap the Format tab, then select the format from the lists of available formats.5Ta p Done.Current time and date Other city time and dateAlarm slotsCurrent city

90DraftPersonal Organizer FeaturesSetting LocationTime can display time and date information for two locations:•Current – The place where you are at the moment. The time and date of your current location display in the top half of the screen.•Other – A city of your choice. The time and date of this city displays below the time and date of your current location. If you are abroad, you can check the time at home by setting this location to your home city.Action1Tap Date and Time > Set location.2Select your current location from the Current country and Current city lists.Note: If the city you want is not listed, select another city in the same time zone.3Select another location (optional) from the Other country and Other city lists.4Tap Done.

91DraftPersonal Organizer FeaturesSetting AlarmsYou can use Time as an alarm clock. It is ideal for wake-up alarms and other regular alarms you do not want to include in your Calendar or To Do list.You can set up to three alarms in Time. The alarm slots display in the lower half of the Time screen.Responding to AlarmsWhen an alarm sounds, the message you selected displays. Tap the Snooze button to reset the alarm to sound again in 5 minutes.Note: The alarm does not sound while you are making a phone call or recording a voice note.Action1Tap one of the alarm slots.2Set the following alarm details:Time – time of day you want the alarm to sound.When – how often you want the alarm to sound: once, during the next 24 hours, daily, on workdays only, or weekly.Alarm sound – the sound you want the alarm to make. Tap to listen to the selected sound.Message – one of several preset alarm messages or enter your own.3Ta p Done.4Tap the alarm checkbox to turn on the alarm.

92DraftPersonal Organizer FeaturesTurning Alarm Sounds OffTo silence an alarm before it sounds, do one of the following:•Uncheck the alarm slot checkbox.•Tap the alarm slot, then select Silent in Alarm sound.CalculatorTo open Calculator, tap in the Application Launcher.Use the calculator by tapping the on-screen keys. Making Voice RecordingsYou can record personal messages on your communicator.Note: Recording of phone calls is subject to varying State and Federal laws regarding privacy and recording of phone conversations.Tip: Make your recording in a quiet location. Hold the communicator about 4 inches (10 centimeters) from your mouth, and speak directly into the communicator in a normal tone.

93DraftPersonal Organizer FeaturesTip: Adjust your volume setting for playback.Action1Open Voice ( ).2Ta p Voice>New Voice note or tap New (at the bottom of the screen).3Tap to begin recording.4Tap to stop recording.5Tap to playback the recording.A counter at the top of the screen indicates the number of the current recording and the total number of recordings. For example, 1/2 indicates you are on the first of two records.Tap to pause during playback.Tap to resume playback.Tap and slide left to decrease volume or right to increase volume during playback.To delete a recording, tap Delete while on the record.

94DraftPersonal Organizer FeaturesPlaying a RecordingDeleting a RecordingSending a RecordingAction1Open Voice ( ).2Tap or to go to the recording you want to play.3Tap to play the recording.Action1Open Voice ( ).2Tap or to scroll to the recording you want to delete, then tap Voice> Delete note or tap Delete (at the bottom of the screen).Action1Open Voice ( ).2Tap or to scroll to the recording you want to send, then tap Voice > Send as.3Tap one of the selections in the Send as box, then press Done.4Follow the normal procedure for your selection.

95SecurityDraftSecurityLocking and Unlocking CommunicatorYou can lock the communicator so that the touchscreen and keys do not work. When you lock the communicator, you can still use the B and A keys for incoming phone calls.Establishing Password ProtectionYou can establish password protection to prevent unauthorized access to information in the communicator.Action1Open Control Panel application ( ).2On the Handset tab, tap Password.3Tap the Security tab, then tap Set Security Code.4Tap in your current security code, then tap Done.5Enter a new security code, then tap Done. Confirm the new security code, then tap Done.Slide up to lock. Slide down to center to unlock.

96SecurityDraft6To set a phone lock code, tap Phone Lock > Set lock code. Enter a lock code, then tap Done. Confirm the lock code, then tap Done.Tap the On or Off button for Auto Phone Lock.To delete the code, tap Clear, enter your current code, then tap Done.7If you want the password entry screen to display owner information: aTap Owner.bIn the Owner Information box, enter the text that you want displayed.cTap Done.Action

97DraftNews and EntertainmentNews and EntertainmentWeb BrowserThe Web browser lets you open Web pages and use Web-based applications (such as on-line banking, shopping, and games) on your communicator. Setting Up Your Internet AccountBefore you can use the Web browser, you must set up an Internet account (see page 50).Opening Web BrowserTap in the Application Launcher or Application Selector Bar.To open the Web browser and go directly to the Hutchison portal, press E.If you have saved bookmarks and/or Web pages, an alphabetical list of your bookmarks or saved Web pages displays, depending on which you displayed last.Note: If your bookmarks or saved pages do not display, tap Browse > Bookmarks or Saved pages.

98DraftNews and EntertainmentOpening Web PagesAdding BookmarksTo add a bookmark for a Web page so you can return to the page without having to enter its address:Action1Tap the bookmark or saved Web page you want to open.2Tap Browse > Open new. Enter the Web page address, in the Location field, then tap Open.Note: you can omit the http://.3Change the Title if desired, then tap Save.Action1Open the Web page.2Tap Browse > Page information.3Tap Bookmark.Note: You can change the Title before saving the bookmark, if desired, in the Title field.4Tap Add.

99DraftNews and EntertainmentSaving Web PagesTo save a Web page so you can view it later when not connected to the Internet (offline browsing):Downloading Audio, Video, and PicturesYou can download audio files, video clips, and pictures from the Web. To download a file, follow the instructions on the Web page. When the download completes, the file opens in the browser or in another communicator application (depending on the file type). You can save the file to a folder in the communicator or to the memory card.You need a license to open media files that have digital rights protection. If you do not have a license for a protected file, your communicator prompts you to launch the Web browser and download one. Action1Open the Web page.2Ta p Browse> Page information.3Ta p Save and change the Title if desired.Note: You can change the Title before saving the page, if desired, in the Title field.4Ta p Save.

100DraftNews and EntertainmentMusicUse Music to listen to the following types of audio files: AU, AMR, MIDI, MP3, and WAV. You can listen to audio files that you downloaded from the Web, received as an email attachment, or stored on the removable memory card.Opening MusicTap in the Application Launcher. When Music opens, it shows a list of all saved audio tracks.To see the audio tracks saved in a specific folder, tap the current folder name (upper right corner) and select the desired folder from the list.Sample music files are provided on the CD supplied with the communicator.You need a license to open media files that have digital rights protection. If you do not have a license for a protected file, your communicator prompts you to launch the Web browser and download one.

$101DraftNews and EntertainmentNote: Audio tracks must be stored in the proper directory on the memory card for you to see and play them in Music. When you copy audio files to the memory card from a computer, ensure that the files are stored in a third-level directory under: Media Files\Audio\For example, you can store audio files in any of the following directories:Media Files\Audio\ClassicalMedia Files\Audio\RockMedia Files\Audio\UnfiledPlaying an Audio TrackAction1In the list of tracks, tap the track you want to play.Information about the track displays (artist, album, etc.) and the track begins to play.$

102DraftNews and Entertainment2While the track plays, you can tap the following buttons at the bottom of the screen: Tap and hold down to rewind the track. Tap to stop playing and return to the start of the track. Tap to switch between play and pause mode.Tap and hold down to advance (fast forward) the track.Note: The S key also controls audio play:left = rewind, right = fast forward, center = play/pause.Action

103DraftNews and EntertainmentManaging Music PlaylistsMusic can play all of the tracks in a folder in a sequence that you specify. To specify the sequence, you must edit the folder’s playlist:Action1Open the folder containing the tracks you want to play.2Tap to switch to Playlist view.3Ta p Edit >Edit Playlist. The Reorder Playlist screen displays:4To arrange the sequence, tap a track and then tap the arrows to move it up or down in the sequence.5When the tracks are arranged in the sequence you want, tap Done.

104DraftNews and EntertainmentPlaying a Music PlaylistAction1Open the desired folder.2Tap to switch to the Playlist view3Tap to play the highlighted trackorSelect a track by tapping on it. The track automatically starts playing.The Music Player plays the tracks in the sequence you selected.

105DraftNews and Entertainment4While the playlist plays, you can tap the following buttons at the bottom of the screen: Tap and release to start playing from the beginning of the current track or to jump to the beginning of the previous track in the playlist (if already at the start of the current track).Tap and hold down to rewind the current track. Tap to stop playing and return to the start of the track. Tap to switch between play and pause mode. Tap and release to start playing from the beginning of the next track in the playlist.Tap and hold down to advance (fast forward) the current track.Action

106DraftNews and EntertainmentSaving Audio FilesWhen you download an audio file from the Web or open an audio email attachment, the Save Audio File screen displays. To save the file to a folder in the communicator or to the Memory card:Note: To ensure optimum use of communicator memory, save audio clips to the memory card when possible.Action1Tap the down arrow to the left of the filename.The File information screen displays.2In the Audio screen, tap to play the audio file, or the right arrow to install as a Ring Tone.3Tap Save.4Select the location to which you want to save the file.5Tap Save.

107DraftNews and EntertainmentCameraYou can use the built-in camera to take still pictures and record video clips.Opening Camera ApplicationTap in the Application Launcher. When the Camera application opens, a camera viewfinder displays the image viewed by the camera lens.ViewfinderCamera Mode buttons (Still and Video)Memory available

108DraftNews and EntertainmentUsing the Front and Back Camera LensYou can use the front or back of the camera to take pictures. To switch between the front or the back lens, tap .Using the Camera Control KeysYou can hold you communicator like you would hold a standard camera to take pictures. When in camera mode, the volume keys are used for zooming the image in and out.VGA Camera,Point to Point (P2P) 1.2 Mega Pixel Press the right side to zoom in, and the left side to zoom out.Press to take a picture.

109DraftNews and EntertainmentTaking Still PicturesSelecting Camera SettingsYou select the picture size, quality, lighting, and flicker settings.Action1Tap to place camera in Still mode.2Point the camera lens at the subject.3Tap or press C (center key) to take the picture.The picture displays in the viewfinder.4Tap or press C (center key) to save the picture.If you want to delete the picture without saving it, press C (right arrow) or tap . Action1Tap to place camera in Still mode.2Ta p Camera >Camera settings.3Select the desired settings.4Ta p Done.

110DraftNews and EntertainmentRecording Video ClipsYou can use the camera to record a video clip up to 60 seconds long.Using Self-TimerThe camera has a self-timer that automatically takes a picture or records a video clip 5 seconds after you turn it on.Action1Tap to place camera in Video mode.2Point the camera lens at the subject.3Press C (center key) and hold for 2 seconds to start recording the video.The video image displays in the viewfinder.4To stop recording, press C (center key) again.The video is saved to the currently selected folder.Action1Set camera to desired mode (still or video), as described in the previous sections2Point the camera lens at the subject.3Tap Camera > Self timer on.

111DraftNews and EntertainmentAvailable Memory IndicatorThe available memory indicator below the viewfinder shows an estimation of how many more pictures or video clips you can take before the selected folder’s memory is full. When memory is full, the camera stops recording.Switching to PicturesWhen the Camera is in Still mode, you can quickly switch to Pictures to view, edit, and send the pictures you have taken. See “Pictures” on page 116.To switch to Pictures, tap . Switching to VideoWhen the Camera is in Video mode, you can quickly switch to Video to watch and send the video clips you have recorded. See “Video” ahead.To switch to Video, tap . 4Press C (center key) and hold for 1 seconds to start the timer.The camera starts counting down from 5 to 0. When it reaches 0, it takes the picture or starts recording.Action

112DraftNews and EntertainmentVideoUse Video to watch video clips and streaming video and audio from the Web. You can watch video clips that you recorded with the communicator’s camera, downloaded from the Web, received as an email attachment, or stored on the removable memory card.Opening VideoTap in the Application Launcher. When Video opens, it shows a list of all saved video clips.To view the video clips saved in a specific folder, tap the current folder name (upper right corner) and select the desired folder from the list.Sample video files are provided on the in-box CD supplied with the communicator.You need a license to open media files that have digital rights protection. If you do not have a license for a protected file, your communicator prompts you to launch the Web browser and download one. Note: Video clips must be stored in the proper directory on the memory card for you to see and play them in Video. When you copy video files to the memory card from a computer, ensure that the files are stored in a third-level directory under:

$113DraftNews and EntertainmentMedia Files\Video\For example, you can store video files in any of the following directories:Media Files\Video\Movie TrailersMedia Files\Video\HomeMedia Files\Video\UnfiledPlaying a Video ClipAction1In the list of video clips, tap the clip you want to play.The video begins to play in portrait (vertical) view:$

114DraftNews and EntertainmentTo see the video in landscape (full-screen) view, tap anywhere on the playing video. To return to portrait view, tap the playing video again.Playing Streaming Video and AudioTo play streaming video and audio from the Web, use the Web browser to select the link to the video or audio clip or broadcast. The communicator establishes a connection with the server and buffering begins. When buffering completes, the video or audio starts playing.2While the video plays, you can tap the following buttons at the bottom of the screen: Tap to switch between play and pause mode. Tap to stop the video and return to the beginning. Tap to open the Camera application. Tap to return to the list of video tracks.Note: The C key also controls video play: left = rewind, right = fast forward, center = play/pause.Action

115DraftNews and EntertainmentSaving Video ClipsWhen you download a video clip from the Web or open a video email attachment, the clip begins playing in Video. You can save the clip to a folder in the communicator or to the memory card.Note: To ensure optimum use of communicator memory, save video clips to the memory card when possible.Sending Video ClipsYou can send video clips by email, SMS message, MMS message, or Bluetooth.Note: For more information on Bluetooth, see page 72.Action1Ta p Video > Save.2Select the location to which you want to save the file.3Ta p Save.Action1In the list of video clips, tap the clip you want to send.2Ta p Video > Send as.3Select the method by which you want to send the video clip.4Ta p Done.

$116DraftNews and EntertainmentPicturesUse Pictures to view and edit picture files. You can view pictures that you took with the camera, downloaded from the Web, received as an email attachment, or stored on the removable memory card.Opening PicturesTap in the Application Launcher. When Pictures opens, it shows small thumbnail pictures of all saved picture files or a list of picture files (depending on the view you selected when Pictures was last open).To switch views, tap Setting > List.To see the pictures saved in a specific folder, tap the current folder name and select the desired folder from the list.Note: Pictures must be stored in the proper directory on the memory card for you to see them in Pictures. When you copy picture files to the memory card from a computer, ensure that the files are stored in a third-level directory under:Media Files\Image\For example, you can store pictures in any of the following directories:Media Files\Image\KidsMedia Files\Image\VacationMedia Files\Image\Unfiled$