Motorola Mobility T6YH1 User Manual d520 bk
Motorola Mobility LLC d520 bk
UserManual.wiki
>
Motorola Mobility
>
T6YH1 User Manual
Exhibit 15
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![4EnglishSpecial KeysSPress and hold to turn the phone on; press to turn the phone off.OPress to accept call, accept setting, accept option.CPress to reject call, reject setting, clear digits, reject option.[] Press to move through the menu and feature choices, or to edit an SMS message.\Press to adjust the speaker or ringer volume.Making a CallEnter the number using the digit keys and press O.Receiving a CallTo receive a phone call, press O or any other key except S or C.Ending a CallTo end a phone call, press O.GSM Emergency CallsTo dial the GSM emergency number, press 112O. The call will be directed to a central emergency operator.Redialling the Last Number CalledWhen in standby mode, press OO.Dialling Phone Book NumbersTo dial a specific Phone Book Number, dialLocation #OOne-Touch DiallingPress and hold the appropriate digit key 1 to 9. Locking the KeypadPress * and # simultaneously.Quick Access FeaturesPress E followed by the appropriate key (1-9) or press E, scroll to the feature and press O to select.d520.bk : qkref.fm5 Page 4 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-5.png)
![About Your Phone, Battery and SIM Card 11 EnglishAbout Your Phone, Battery and SIM CardThe KeysSPress and hold to turn the phone on; press to turn the phone off.OPress to make and receive calls.Press to end calls.Press to confirm the choice of menu or feature.CPress and release to clear a digit in the display; press and hold to clear the entire display.[ Press to move through the ]menu and feature choices, or to edit an SMS message.EPress to access the Quick Access Menu features.\Press to adjust the earpiece speaker volume. Release the key and hold it down again to change direction. The DisplayThe display on your phone can show alphanumeric characters as well as useful information symbols. The various elements of the display are as follows:rx Signal Strength - indicates the strength of the coverage in your current cellular system area. The more bars lit, the better the chances of successfully making and receiving calls. Also indicates phone is switched on.qBattery Charge Indicator. The more segments displayed, the greater the battery charge. Flashing indicates charging.kIn Use. Displayed when a call is in progress.lRoam. Displayed when you are registered on a Network other than your home Network.oShort Message Service1- Displayed when the phone has received a message. The symbol will flash when your message storage area is full.pVoicemail1- Displayed when your voicemail has received a message.h Ringer On. Displayed when the call ringer is selected. If you select the No Ring option this symbol will not be displayed.1. Network and subscription dependent feature.d520.bk : abtphone.fm5 Page 11 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-16.png)
![Making and Receiving Phone Calls 15 EnglishMaking and Receiving Phone CallsSwitching Your Phone On and OffPress and hold S to turn phone on and off. If you switch the phone on and there is no SIM card inserted, you will be asked to check and insert one. Once inserted, the phone will check that the SIM card is valid.As the phone searches and finds a suitable network to connect to, the network name will be displayed. You may be required to enter a PIN Code or Unlock Code.Entering Your SIM Card PIN CodeEnter the Pin Code and press O.As you type in each digit of the PIN code a * character will be displayed.If you make a mistake, press and release the C key to remove the last digit. Holding the C key down will remove the entire entry.If the PIN code entered is incorrect, the warning message Wrong PIN will be displayed, followed by Enter PIN.!If the PIN number is entered incorrectly three times in a row, your phone will automatically lock-up and the Blocked message will be displayed. See ‘Unblocking Your Phone’ later in this manual, under the heading ‘Phone Setup - Require SIM Card PIN’ for details on unblocking your phone.Entering Your Unlock CodeIf your phone displays the message Enter Phone Unlock Code you must enter your unlocking code by entering the Unlock Code and pressing O.The unlock code is a four digit number which is set at manufacture to 1234. The code can be changed. See ‘Phone Lock’ in the Phone Setup Menu section for more details.If you forget your unlock code, press the [ or ] key. This will display the ‘Change Unlock Code’ option. Press O, Security Code, enter a new unlock code, and press O.Locking the KeypadPress the * and # keys simultaneously to prevent accidental usage of the phone. To remove the lock, press * and # simultaneously. All keys with the exception of the S key will be disabled. You can still answer an incoming call by pressing O when the keypad is locked.d520.bk : usephone.fm5 Page 15 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-20.png)
![Making and Receiving Phone Calls16EnglishMaking a Phone CallEnter the number using the digit keys and press O.If you make a mistake, press and release the C key to remove the last digit. Holding the C key down will remove the entire number.To end your call press O.Automatic RedialIf your call attempt does not succeed as a result of the system being busy, the message Redial? will be displayed for five seconds. Pressing O at this point will automatically redial the phone number.Redialling the Last Number CalledWhen in standby mode, press O O. One-Touch Dialling Phone Book NumbersTo quickly retrieve and dial a number stored in the first nine locations of your Phone Book, press and hold the appropriate digit key. For example, pressing and holding 2 will dial the phone number stored in location 2 of your Phone Book.Dialling Phone Book NumbersEnter a Phone Book Location and press # O.If you don’t know the exact location, you can enter a random location and then use the [ or ] key to scroll to the number you want.International Phone CallsTo make an international phone call press and hold the 0 key. After a couple of seconds the international dialling prefix + will appear in the display, this allows you to call from any country without knowing the local international access code.Inserting Pauses Into Phone NumbersTo obtain a three second 'pause' character in a phone number, press and hold the * key for a couple of seconds, the pause symbol Ü will appear.The pause character produces a three second delay whenever it is used. However, the first pause character in a phone number is a special case, it will not begin its delay until the call is answered. GSM Emergency CallsProvided that your phone has found a network, you will be able to dial the worldwide GSM emergency number. The call can be made regardless of any security codes and, depending on the network, with or without a SIM card inserted.The emergency call will be directed to a central emergency operator.To dial the worldwide GSM emergency number, press 112O.d520.bk : usephone.fm5 Page 16 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-21.png)
![Making and Receiving Phone Calls18EnglishIn-Call MenuThe “In-Call” menu provides access to additional functionality during a call. Entering the In-Call MenuThe “In-Call” menu is accessed by pressing the [ or ] key during a call.Leaving the In-Call MenuTo leave the “In-Call” menu press the C key.In-Call Menu OptionsThe options listed in the “In-Call” menu will dynamically change depending on the current call state. The following list contains all of the possible options in the “In-Call” menu.AOnly some of the options will appear at any given time. The order of the options may vary.Hold CallThis option will put the active call on hold.Make a New CallThis option allows you to make another call. Restrict My NumberThis option allows you to make a call without the remote user getting advanced warning of the number.Turn Mute On or OffTemporarily turns the microphone off during a phone call. Reselect this option to resume your conversation.End Active CallThis option terminates the active call, and makes the call that was previously on hold, the active call. d520.bk : usephone.fm5 Page 18 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-23.png)
![Making and Receiving Phone Calls20EnglishCall Holding and Call WaitingYour phone supports the GSM options of Call Holding and Call Waiting. Using these options you can place a current phone call on hold and accept an incoming call or start a second call (See ‘Call Waiting’ in the ‘Call Related Features’ menu for details of how to control this feature).Call Holding and Call Waiting ScenariosThe display will automatically change according to the status of your current call (or calls) and will propose the option that you are most likely to want. Press O to accept this option or press [ or ] to scroll through the “In-Call” menu for the alternative options. By following this procedure you will find that even the triple combination of an active call, a held call, and a call waiting is easy to manage.The following points summarise the more common situations:• To end the active call, press O. If you have a call on hold it is automatically connected.• To put the active call on hold and make another call, press [ or ] and select the Hold Call option, and then press [ or ] again and select the Make New Call option1.• To put the active call on hold and reconnect a held call, press [ or ] and then select the Switch Calls option.1. A quicker method of making another call is to enter the number to be called directly. As soon as you press the first digit, the display will change to Call?. This will disappear three seconds after the last key press, but if you press O before then, your phone will place the current call on hold and attempt to call the number entered.• To accept a waiting call, press O. The active call will be placed on hold. If you prefer to end the active call before accepting the waiting call, press [ or ] and select the End Active Call option, or End Held Call option as appropriate.• To reject a waiting call, press [ or ] and select the Reject Call Waiting option (or simply press the C key).AIf you have an active call, a call on hold and a call waiting, you cannot accept the waiting call until you end either the active call or the held call, or join the active and held calls.d520.bk : usephone.fm5 Page 20 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-25.png)
![Making and Receiving Phone Calls22EnglishMaking a Conference CallThis option joins the active call with a held call. With Conference Call, you can have a conference with up to five other telephones. At any time during your call, you can add, disconnect or separate individuals from the Conference Call using other “In-Call” menu options. AYou must subscribe to both Conference Call and Call Waiting Supplementary Services to be able to use this feature.Initiating a Conference CallTo initiate a Conference Call, place the active call on hold, and dial another phone number. You will then have one active call and one call on hold.Press the [ or ] key to enter the “In-Call” menu and select Conference Call. The currently active call and the call on hold will then join into one Conference Call.Managing a Conference CallWhile in a Conference Call, you will have the option to add new calls to the Conference Call or separate one of the members from the Conference Call.Adding a New CallThere are a number of different ways to add new calls to the Conference Call:• Using the digit keys.•Using the Make New Call option from the “In-Call” menu.• Recalling a Phone Book Entry using Quick Access• Answer Call Waiting.No matter which method is chosen to add a new call, the original Conference Call will be first placed on hold while the new call is being connected. You must then enter the “In-Call” menu and select Conference Call to join the New Call with the original Conference Call in progress.Separate One of the Members in the ConferenceDuring a Conference Call, you will also have the option to separate a selected member from the main Conference Call.AIn order to separate a member from the main Conference Call, there must not be any calls on hold.Press [ or ] during a Conference Call and select Split Call. You will then be presented with the phone number or name of all members of the Conference Call. Use the scroll keys to find the selected member of the Conference Call. Once the desired member is selected, press the O key and select Split Call.At this point, the selected call will be separated from the main Conference Call and private conversation between you and the selected member is possible.To re-join all the parties again, select Conference Call from the “In-Call” menu.d520.bk : usephone.fm5 Page 22 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-27.png)
![Menu Navigation 23 EnglishMenu NavigationMenus and Sub-MenusPlease read this section carefully before attempting to access a menu or feature.A menu is a simple list of options. Some of these options provide access to a further list of options called a sub-menu.Entering the Menus[ or ] accesses the Features menuE accesses the Quick Access menu Once the menus are entered, use the [, ], O and C keys to access and change individual options.Leaving the MenusTo leave any of the menus, you can either press and hold the C key or repeatedly press the C key.Moving to and Selecting a Menu FeatureTo move from one option to another on the same level, use the ] key to scroll forwards and the [ key to scroll backwards. When you find the option you want, press the O key to select it.Depending on the feature you select, one of three things will happen:• either a brief message will be displayed confirming an action, for example Completed.or• a prompt will be displayed requesting you to enter information, for example Enter PIN or Enter Name.or• the first option of a sub-menu will be displayed. You can select this option using the O key or browse through the other options using the scroll keys.To leave an option or sub-menu, press the C key. This will take you back to the parent menu item.Menu Options with Security CodesSome options are protected from misuse by requiring you to enter one of the security codes. In order to use these options, you must enter the requested code before proceeding.Short, Extended and Personalised MenusThe menu diagrams show the condition of the menu settings when you first receive your phone. Some features are in the Short Menu and are shown in bold type. Other features are in the Extended Menu and appear in shaded italics - these features do not appear when you first scroll through the menus.You can change which features appear in the Short and Extended Menus, and therefore personalise the menus, to suit your requirements.If you want to move a feature from the Short Menu to the Extended Menu (or from the Extended Menu to the Short Menu), go to the feature and then hold down the O key until a prompt appears offering the following choices:• Add the current feature to the Short Menu/Extended Menu.• Leave the current feature in the Short Menu/Extended Menu.Select the option you want by pressing the O key.AThe settings for some menu features cannot be changed.d520.bk : navigat.fm5 Page 23 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-28.png)
![Using The Options Menu 27 EnglishHow to Enter a NameThe 0, 1,... ...,8 and 9 keys are used to enter alphabetic characters.For example, if you press the 5 key, the first displayed character will be J. If this is not the required character, then you can press the same key again to show K. Another press will display L, another... ...will display 5.A long press of any of the keys will switch all the characters to lower case, a second long press will switch back to upper case.To enter the next character press the appropriate key. If, however, the next character is on the same key as the previous character you will first need to press the ] key. Pressing the ] key a second time will produce a space.If a mistake has been made, you can go back to the incorrect character by pressing [.Characters can be removed from the display by pressing the C key.The character under or before the cursor (Ö) will be deleted.Press the O key to store the information.Available CharactersPress the appropriate keys to get the following characters:1Space .1 ? ! , Ÿ Ä & : " ( ) ' ` @ % ¡ ¢Space .1 ? ! , Ÿ Ä & : " ( ) ' ` @ % ¡ ¢2A B C 2 [ ® ± ¼ ¾ ©a b c 2 { ¯ ± ½ ¾ ©3D E F 3 ° ¿ ¤ ²d e f 3 ° ¥ ¤ ²4G H I 4 À §g h i 4 À §5J K L 5 Áj k l 5 Á 6M N O 6 ] \ « ¨ µm n o 6 } | ¬ ¨ µ7P Q R S 7 Â ¾ ¸p q r s 7 Â ¾ ¸8T U V 8 ¹ ^ ¦t u v 8 ¹ ~ ¦ 9W X Y Z 9 º ·w x y z 9 º · 0+ - 0 x * / = > < #+ - 0 x * / = > < #The top line for each key shows the upper case characters, the lower line shows the lower case.d520.bk : phnbook.fm5 Page 27 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-32.png)
![Using The Options Menu28EnglishPersonal NumbersTo Find Entry By NamePress O to select this feature and enter the first three characters of a name.The Phone Book entries will be searched and the first matching entry will be displayed. To display adjacent Phone Book entries use the [ or ] key.To Find Entry By LocationPress O to select this feature and enter a location number and press O.The Phone Book entries will be searched and an entry will be displayed. To display adjacent Phone Book entries use the [ or ] keys.Call Number, Modify Name or Number or Erase Name And Number OptionsOnce a Phone Book entry has been selected, it can be called, modified or deleted.Add EntryThis option is used to add (store) entries to the Phone Book.Check CapacityThis option is used to check the number of free Phone Book entries in the SIM card.Prevent AccessThis option enables you to prevent access to the Personal Numbers list.Show ServicesThis option displays a list of phone numbers and services provided by your Cellular Service Provider.Last Ten CallsThe Last Ten Calls Made and Last Calls Received options can be used to call the ten most recently used phone numbers.Once an option has been selected, use the [ or ] key to scroll through the list of phone numbers. Press the O key to call the displayed number.Erase All NumbersThis option erases all the numbers stored in your Last Ten Call Made and Last Ten Calls Received lists.My Phone Number(s)This option allows you to recall your cellular phone number.To enter or change a number, scroll to the location and press O. You will be prompted to enter a phone number and then a name. Press O to store the information.Fixed DiallingAAvailability of the Fixed Dialling menu depends on the type of SIM card.This feature allows you to limit use of your phone to a predefined list of telephone numbers (apart from an emergency number).d520.bk : phnbook.fm5 Page 28 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-33.png)
![Using The Options Menu 33 EnglishTalk and FaxThis is a network feature that allows you to speak and then send or receive a fax during the course of a single call.AYour phone supports a data and fax transmission speed of up to 9600 bps.Before making a Talk and Fax call, ensure that:• Your phone is “fax-ready” (it has been switched off, connected to the fax, then switched back on). Connecting your phone to the fax in the middle of the call will not work.• The Talk and Fax mode is set to On.A Talk and Fax call automatically switches to fax mode when you start sending the fax. While the fax is being transmitted, the message Fax in progress will be displayed. The call automatically ends when the fax transmission is complete. You cannot switch back to voice mode in the same call.AWhile a Talk and Fax call is active, incoming call services like Call Waiting and Call Holding are suspended.If you receive a Talk and Fax call when:• Your phone is not fax-ready - you can only talk.• Your phone is fax-ready but Talk and Fax mode is off - the call is automatically routed to your fax (you cannot talk).OnSwitches Talk and Fax mode on for the next and all subsequent calls.OffSwitches Talk and Fax mode off for the next and all subsequent calls.Call Holding and Call WaitingUsing these options you can place a current phone call on hold and accept an incoming call or start a second call.If Call Waiting is On, you will be notified of a waiting call by an audible alert and by the message Call Waiting - Answer? . You can press the O key to accept the waiting call, or use the [ or ] keys to scroll to an alternative option and then press O.AIf you have Caller Line Identification, the caller’s number or name is displayed instead of the Call Waiting message.Call BarringThis is a network feature which can be used to selectively bar outgoing and incoming calls.If you change the barring setting, you may be asked to enter your barring password. There will be a short delay while the phone notifies the network of the new setting. When the change has been made by the network, the phone will display a confirmation message.The initial password will be supplied to you by your Cellular Service Provider when you subscribe to this service.AThis option may be affected by the Call Diverting or Fixed Dialling settings.d520.bk : clrltd.fm5 Page 33 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-38.png)
![Using The Options Menu 35 EnglishHow to read SMS MessagesYou can use the scroll keys ([ and ]) to scroll through messages in either the Received Messages or Outgoing Messages lists.To display a specific message, enter the message number, for example press 5 to display the 5th message. If the message does not exist, Invalid Msg Number will be displayed.Alternatively, to display the next message, press O and select Go To Next Message .How to Create and Edit SMS MessagesUse the Message Editor to create or modify text messages. When you enter the editor, the last message that was edited will be displayed. Press and hold C to clear the message and start a new one, or modify the message displayed.Press O once you have completed your message. You will then be presented with the following options:Send Message - If you select this option you will be prompted for a phone number, enter the number and then press O to send the message.Store Message - Select this option to store your edited message in your Outgoing Messages list.AIf you don’t store the message after it has been edited, you will lose all your changes as soon as you select another message to be edited.Call VoicemailThis option will make a call to the current voicemail number. The voicemail number is entered using the ‘Voicemail Number’ option in the Messages menu.Received MessagesUsed to view and manage any SMS messages that have been sent to your phone number. When selected, a message indicating the total number of messages and how many are new will be displayed.Press the O key, when viewing any message, to enter the ‘Delete Message’, ‘Return Call’, ‘Edit Message’ and ‘Go to Next Message’ sub-menu.Outgoing MessagesUsed to view and manage any outgoing messages. These messages will be stored on your SIM card. When you select this option, the total number of messages will be displayed followed by the first message in the list.AYou cannot send an outgoing message until the Message Service Centre number has been set. See ‘Message Settings’.Press the O key, when viewing any message, to enter the ‘Send Message‘, ‘Edit Message’, ‘Delete Message’ and ‘Go to Next Message‘ sub-menu.Message EditorThe Message Editor is used to edit the currently selected message and then to either send the modified message or store it in your Outgoing Messages list.d520.bk : messages.fm5 Page 35 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-40.png)
![Using The Options Menu36EnglishCell BroadcastPlease contact your Cellular Service Provider for a list of available channels and the information they provide. While a broadcast message is scrolling across the display you can stop and start it by pressing [. Press ] to restart the message from the beginning.AIf you need to use the [ and ] keys for their normal functions while you are receiving a cell broadcast message, you must first remove the message.Message SettingsVoicemail NumberUsed to enter a phone number which will be used by the ‘Call Voicemail’ option.This location can be programmed to call any other number if you do not want instant access to voicemail.This location may be programmed and locked by your service provider. If so, this feature option will not appear.Service CentreBefore you can send any messages you must use this option to enter your Message Service Centre number. This number is obtained from your Cellular Service Provider.Expiry PeriodYou can use this option to specify the maximum time, in hours, that your unforwarded messages are to remain with the Message Service Centre before being deleted. Outgoing Message TypeThis option is network dependent and can be used to specify the format of your outgoing messages. You can select from the following message types: Text (default), Fax, X400, Paging, E-Mail, ERMES or Voice.d520.bk : messages.fm5 Page 36 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-41.png)
![Using the Options Menu40EnglishUsing The Network Selection MenuIn order for the phone to make and receive calls it must be connected to a GSM900 network.Available NetworksThis option will scan to see which networks are operating in your current location. When the scan is complete, use the [ or ] key to scroll through the list. When you see a network you wish to register with or store in your preferred list, press the O key.Network SearchThese options determine how often your phone tries to register with a network and how the attempt is made.!Fast and Continuous Search may use up a significant amount of battery power.Preferred NetworksAdd Network To ListEnables you to add networks to your preferred list.Show List Of NetworksUsed to display the networks you have stored in your preferred list. In addition, pressing the O key will select the currently displayed entry and enter a move/delete sub-menu.Find New NetworkWhen selected, the phone will try to register with a network. If the attempt fails, your phone will then try to re-register with the previous network.d520.bk : network.fm5 Page 40 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-45.png)
![Using the Options Menu42EnglishAccessory Setup† This option will be displayed only when the headset accessory is attached.You will only be able to access this menu when your phone is mounted in a car kit.Automatic AnswerAllows your phone to automatically answer an incoming call after two rings.Automatic HandsfreeIf this feature is set to on, the phone will always receive incoming calls in handsfree mode. To toggle between handsfree and private while in a call press the [ or ] key and then O.d520.bk : accmenu.fm5 Page 42 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-47.png)
![Using the Quick Access Menu 43 EnglishUsing the Quick Access MenuAThe menu shown above represents the default setting supplied with your phone.Although the features in your phone are available through easy access menus, some of the most commonly used features are also available in the Quick Access menu. Each feature in the menu is allocated a number from 1 to 9.To use a Quick Access feature, press the quick access key (E) followed by the number of the feature, or use the [ or ] key to scroll through the menu and then press O.Find by NameYou will be prompted to Enter Name. Enter the first three characters of the name and press O. The first matching entry in the Phone Book will be displayed. Press O to call the number.Read MessagesYour newest message will be displayed; you can then read, delete and edit messages as normal. See ‘Received Messages’ for more information.Call VoicemailYour phone will make a call to your voicemail number.AYou must have defined a Voicemail number in orderb to use this feature.See ‘Call Voicemail’ for more information.d520.bk : qkaccess.fm5 Page 43 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-48.png)
![What to do if... 47 EnglishWhat to do if...You can’t switch your phone on Check the battery. Is it charged, properly fitted and are the contacts clean and dry? See ‘Important Battery Information’.You can’t make calls Check the antenna. Is it fully extended?Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you are in a building, move closer to a window.Check the Network Selection settings. Try Manual Selection, or try another network. See ‘Network Search’.Check your Operator coverage map.Is Restricted displayed? Check the Call Barring and Fixed Dialling settings.Has the call charge limit been reached? Use your PIN2 code to reset the limit or contact your Service Provider. See ‘Set Total Charge Limit’.Has a new SIM card been inserted? Check that no new restrictions have been imposed.You can’t receive calls Check the antenna. Is it fully extended?Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you are in a building, move closer to a window.Check the Call Diversion and Call Barring settings.Check the Ringer settings. If it is off, there is no audible alert. See ‘Ringer On or Off’.Your phone won’t unlock Have you inserted a new SIM card? Enter the new PIN code. See ‘Entering Your SIM Card PIN Code’.Do you have a replacement phone? Enter the default phone unlock code - 1234.Have you forgotten the unlock code? Press [ or ] to change the unlock code (you will need your security code).Your PIN is blocked Enter the PIN unblocking code supplied with your SIM card (see ‘Unblocking Your Phone’).Your PIN2 is blocked Enter the PIN2 unblocking code supplied with your SIM card (see ‘Change SIM PIN2 Code’).Your SIM card won’t work Is the card inserted the right way round? See ‘SIM Card Insertion’.Is the gold chip visibly damaged or scratched? Return the card to your Service Provider.Check the SIM contacts. If they are dirty, clean them with an antistatic cloth.d520.bk : notes.fm5 Page 47 Friday, May 1, 1998 3:10 PM](https://usermanual.wiki/Motorola-Mobility/T6YH1/User-Guide-2662-Page-52.png)
