Motorola Solutions 89FC3774-D Non-Broadcast Transmitter User Manual

Motorola Solutions, Inc. Non-Broadcast Transmitter

UserManual.wiki >

Motorola Solutions >

89FC3774 D User Manual

Exhibit D Users Manual per 2 1033 c3

APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC3774-DEXHIBIT 8 INSTRUCTION MANUALSDraft copy of the of the front matter of the following instruction manual is enclosed with this submission:68P81095E55-C ......................................................................... Quantar Digital Capable StationFor Conventional, ASTRO6809 Trunking, and IntelliRepeater SystemsInstruction ManualOther system and radio / configuration service software manuals are available to support the product and systemin operation. They can be provided to the Commission upon request.

APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC3774-DEXHIBIT 9TUNE-UP PROCEDUREThis exhibit contains the tune-up procedure as it will appear in the Configuration Service Software (CSS) manual.The following adjustments comprise the total transmitter alignment:1. Reference Oscillator2. Transmitter Power Output3. Transmit Deviation Control4. Reference Modulation CompensationNote: All adjustments are factory pre-set and do not require alignment under normal operating conditions. In theevent alignment is needed, refer servicing to qualified radio maintenance personnel only.TEST EQUIPMENTDescription Recommended model1. Service Monitor Motorola R-2001 or equivalent2. PC with CSSTRANSMITTER ALIGNMENT PROCEDURECSS/RSS Port: A 9-pin D connector is provided on the station control module front panel to allow servicepersonnel to connect a PC loaded with the Configuration Service Software (CSS) and perform programming andmaintenance tasks via this TIA RS-232 port. The following pages of this exhibit will show the important alignmentscreens.EXHIBIT DESCRIPTION9A Reference Oscillator Alignment Screen9B Transmitter Power Output Alignment Screen9C Transmitter Deviation Alignment Screen9D Reference Modulation Compensation Alignment ScreenAll adjustments are software controlled and are pre-set at the factory. Certain station operating parameters can bechanged via man-machine interface (MMI) commands, within predetermined limits. Examples include transmit /receiver operating frequencies and power level.

APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC3774-DEXHIBIT 9ATUNE-UP PROCEDURE - Reference Oscillator Alignment Screen

APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC3774-DEXHIBIT 9BTUNE-UP PROCEDURE - Transmitter Power Output Alignment Screen

APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC3774-DEXHIBIT 9CTUNE-UP PROCEDURE - Transmitter Deviation Alignment Screen

APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC3774-DEXHIBIT 9DTUNE-UP PROCEDURE - Reference Modulation Compensation Alignment Screen

Instruction Manual68P81095E05-CTMDigital-Capable StationFor Conventional, ASTRO,6809 Trunking, and IntelliRepeater SystemsVHF Ċ 25W & 125WUHF Ċ 25W, 100W, & 110W800 MHz Ċ 20W & 100W900 MHz Ċ 100WPRELIMINARY

COMPUTER SOFTWARE COPYRIGHTSThe Motorola products described in this instruction manual may include copyrighted Motorola computer programs stored in semiconductormemories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computerprograms, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrightedMotorola computer programs contained in the Motorola products described in this instruction manual may not be copied or reproduced in anymanner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant eitherdirectly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normalnon-exclusive, royalty free license to use that arises by operation of law in the sale of a product.EPS-34440-BCOMMERCIAL WARRANTY(STANDARD)Motorola radio communications products are warranted to be free from defects in material and workmanship for aperiod of ONE (1) YEAR, (except for crystals and channel elements which are warranted for a period of ten (10)years) from the date of shipment. Parts, including crystals and channel elements, will be replaced and labor will beprovided free of charge for the full warranty period. Thereafter purchaser must pay for the labor involved in repairingthe product or replacing the parts at the prevailing rates together with any transportation charges to or from theplace where warranty service is provided. This express warranty is extended by Motorola Communications andElectronics, Inc., 1301 E. Algonquin Road, Schaumburg, Illinois 60196, to the original purchaser only, and only tothose purchasing for purpose of leasing or solely for commercial, industrial, or governmental use.THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED WHICH ARESPECIFICALLY EXCLUDED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARĆTICULAR PURPOSE. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR INCIDENTAL OR CONSEQUENTIALDAMAGES TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.In the event of a defect, malfunction or failure to conform to specifications established be seller, or if appropriate, tospecifications accepted by Seller in writing, during the period shown, Motorola, at its option, will either repair orreplace the product or refund the purchase price thereof, and such action on the part of Motorola shall be the fullextent of Motorola's liability hereunder.This warranty is void if:a. the product is used in other than its normal and customary manner;b. the product has been subject to misuse, accident, neglect or damage;c. unauthorized alterations or repairs have been made, or unapproved parts used in the equipment.This warranty extends only to individual products, batteries are excluded. Because each radio system is unique,Motorola disclaims liability for range, coverage, or operation of the system as a whole under this warranty except bya separate written agreement signed by an officer of Motorola.LICENSED PROGRAMS Ċ Motorola software provided in connection with this order is warranted to be free from reĆproducible defects for a period of one (1) year. All material and labor to repair any such defects will be provided freeof charge for the full warranty period, and SUBJECT TO THE DISCLAIMER IN BOLD FACE TYPE.Non-Motorola manufactured products are excluded from this warranty, but subject to the warranty provided bytheir manufacturers, a copy of which will be supplied to you on specific written request.In order to obtain performance of this warranty, purchaser must contact its Motorola salesperson or Motorola at theaddress first above shown, attention Quality Assurance Department.This warranty applies only within the United States.EPS-48759-OFCC INTERFERENCE WARNINGThe FCC Requires that manuals pertaining to Class A and Class B computing devices must contain warningsabout possible interference with local residential radio and TV reception. This warning reads as follows:NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferĆence when the equipment is operated in a commercial or residential environment. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructionmanual, may cause harmful interference to radio communications.

EMotorola, Inc. 2002All Rights ReservedPrinted in U.S.A.68P81095E05-C8/30/02-UPCommercial Government andIndustrial Solutions Sector1301 E. Algonquin Road, Schaumburg, IL 60196tDigital-Capable Stationfor Conventional, ASTRO,6809 Trunking, and IntelliRepeater SystemsVHF Ċ 25W & 125WUHF Ċ 25W, 100W, & 110W800 MHz Ċ 20W & 100W900 MHz Ċ 100WCommercial Government andIndustrial Solutions SectorTable of ContentsModel/Option Information xi....................................................................Foreword xxiv...............................................................................General Safety Information xxvi.................................................................Performance Specifications xxviii................................................................DESCRIPTIONDESCRIPTION 68P81096E56.........................................................Introduction page 1...................................................................Compact Mechanical Design page 1............................................................StateĆofĆtheĆArt Electrical Design page 2.........................................................Summary of Operating Features page 3.........................................................Multiple System Capability page 4..............................................................Station Components page 6...........................................................Functional Theory of Operation page 8.................................................Transmitter Circuitry Operation page 8..........................................................Receiver Circuitry Operation page 9.............................................................Station Control Circuitry Operation page 9.......................................................Wireline Interface Board Operation page 10.....................................................Power Supply Module Operation page 10.......................................................INSTALLATIONINSTALLATION 68P81096E57........................................................Pre-Installation Considerations page 2................................................Installation Overview page 2...................................................................Environmental Conditions at Intended Site page 3................................................Equipment Ventilation page 3..................................................................AC Input Power Requirements page 4...........................................................Equipment Mounting Methods page 4...........................................................Site Grounding and Lightning Protection page 5..................................................Recommended Tools and Equipment page 6.....................................................Equipment Unpacking and Inspection page 6....................................................Physical Dimensions and Clearances page 7.....................................................Ċcontinued on next page Ċ

ii 8/30/0268P81095E05-CMechanical Installation page 14........................................................Unpacking the Equipment page 14............................................................Mounting Procedures page 20................................................................Stacking Cabinets page 25...................................................................Stacking Modular Racks page 26..............................................................Anti-Vibration/EMI Screws page 27............................................................Electrical Connections page 28........................................................Power Supply Connections page 28...........................................................RF Cabling Connections page 32..............................................................Connecting System Cables page 38...........................................................Connecting Telephone Lines page 46..........................................................Connecting V.24 Modems page 50.............................................................Connecting External Reference page 51........................................................Post-Installation Checkout page 54....................................................Applying Power page 54......................................................................Verifying Proper Operation page 54............................................................Proceeding to Optimization page 56...........................................................OPTIMIZATIONOPTIMIZATION 68P81086E72........................................................Description page 1....................................................................OPERATIONOPERATION 68P81096E58...........................................................Description page 1....................................................................Summary of Switches, Pushbuttons, and Connectors page 1.......................................Summary of LED Indicators page 1.............................................................MAINTENANCE & TROUBLESHOOTINGROUTINE MAINTENANCE 68P81086E39..............................................Introduction page 1...................................................................Routine Maintenance Overview page 1..........................................................Recommended Test Equipment page 1.................................................TROUBLESHOOTING 68P81096E59..................................................Introduction page 1...................................................................Troubleshooting Overview page 1..............................................................Recommended Test Equipment page 1.................................................List of Test Equipment page 1..................................................................Troubleshooting Procedures page 2....................................................Troubleshooting Overview page 2..............................................................Interpreting LED Indicators page 6..............................................................Interpreting Alarm Alert Tones page 9...........................................................Verifying Transmitter Circuitry page 10..........................................................Verifying Receiver Circuitry page 14...........................................................Ċcontinued on next page Ċ

iii8/30/02 68P81095E05-CModule Replacement Procedures page 19..............................................General Replacement Information page 19......................................................Replacing Power Amplifier Module page 21.....................................................Replacing Exciter Module page 22.............................................................Replacing Power Supply Module page 23.......................................................Replacing Station Control Module page 24......................................................Replacing Wireline Interface Board page 30.....................................................Replacing Receiver Module and/or Preselector Assembly (VHF and UHF) page 32...................Replacing Receiver Module (800 MHz and 900 MHz) page 33.....................................Replacing ASTRO Modem Card page 34........................................................Replacing Backplane Board page 35...........................................................Preselector Field Tuning Procedure page 36............................................Required Test Equipment page 36.............................................................VHF Tuning Procedure page 37...............................................................UHF Tuning Procedure page 40...............................................................STATION MODULESRECEIVER CIRCUITRYRECEIVER MODULE (VHF Ranges 1 and 2; Includes Preselector) 68P81086E28.........Description page 1....................................................................General Description page 1....................................................................Overview of Circuitry page 1...................................................................Controls, Indicators, and Inputs/Outputs page 2........................................Functional Theory of Operation page 3.................................................Synthesizer and VCO Circuitry page 3...........................................................Preselector Filter Assembly page 4.............................................................Receiver Front End Circuitry page 4.............................................................Custom Receiver IC Circuitry page 4............................................................Address Decode and A/D Converter Circuitry page 5..............................................Voltage Regulator Circuitry page 5..............................................................RECEIVER MODULE (UHF) 68P81086E48.............................................Description page 1....................................................................General Description page 1....................................................................Overview of Circuitry page 1...................................................................Controls, Indicators, and Inputs/Outputs page 2........................................Functional Theory of Operation page 3.................................................Synthesizer and VCO Circuitry page 3...........................................................Preselector Filter Assembly page 4.............................................................Receiver Front End Circuitry page 4.............................................................Custom Receiver IC Circuitry page 4............................................................Address Decode and A/D Converter Circuitry page 5..............................................Voltage Regulator Circuitry page 5..............................................................RECEIVER MODULE (800 MHz) 68P81086E76.........................................Description page 1....................................................................General Description page 1....................................................................Overview of Circuitry page 1...................................................................Controls, Indicators, and Inputs/Outputs page 2........................................Functional Theory of Operation page 3.................................................Synthesizer and VCO Circuitry page 3...........................................................Receiver Front End Circuitry page 4.............................................................Ċcontinued on next page Ċ

iv 8/30/0268P81095E05-CCustom Receiver IC Circuitry page 4............................................................Address Decode and A/D Converter Circuitry page 5..............................................Voltage Regulator Circuitry page 5..............................................................RECEIVER MODULE (900 MHz) 68P81091E92.........................................Description page 1....................................................................General Description page 1....................................................................Overview of Circuitry page 1...................................................................Controls, Indicators, and Inputs/Outputs page 2........................................Functional Theory of Operation page 3.................................................Synthesizer and VCO Circuitry page 3...........................................................Receiver Front End Circuitry page 4.............................................................Custom Receiver IC Circuitry page 4............................................................Address Decode and A/D Converter Circuitry page 5..............................................Voltage Regulator Circuitry page 5..............................................................TRANSMITTER CIRCUITRYEXCITER BOARD (VHF, UHF, 800/900 MHz) 68P81086E24..............................Description page 1....................................................................General Description page 1....................................................................Overview of Circuitry page 1...................................................................Controls, Indicators, and Inputs/Outputs page 2........................................Functional Theory of Operation page 3.................................................Synthesizer and VCO Circuitry page 3...........................................................RF Switch Circuitry page 4.....................................................................Microprocessor Circuitry page 4................................................................TX Power Control Circuitry page 5..............................................................VHF POWER AMPLIFIER MODULE (25W/125W R1 & R2) 68P81086E23....................Description page 1....................................................................General Description page 1....................................................................Overview of Circuitry page 1...................................................................Controls, Indicators, and Inputs/Outputs page 2........................................Functional Theory of Operation page 3.................................................RF Signal Path page 3........................................................................Output Power Control page 3..................................................................Sense and Detect Circuitry page 4..............................................................Cooling Fans Control Circuitry page 6...........................................................UHF POWER AMPLIFIER MODULE (R0/110W; R1 & R2/25W; R1-3/110W; R4/100W) 68P81088E44Description page 1....................................................................General Description page 1....................................................................Overview of Circuitry page 1...................................................................Controls, Indicators, and Inputs/Outputs page 2........................................Functional Theory of Operation page 3.................................................RF Signal Path page 3........................................................................Output Power Control page 3..................................................................Sense and Detect Circuitry page 4..............................................................Cooling Fans Control Circuitry page 6...........................................................

v8/30/02 68P81095E05-CPOWER AMPLIFIER MODULE (20W/100W 800 MHz; 100W 900 MHz;) 68P81091E91.........Description page 1....................................................................General Description page 1....................................................................Overview of Circuitry page 1...................................................................Controls, Indicators, and Inputs/Outputs page 2........................................Functional Theory of Operation page 3.................................................RF Signal Path page 3........................................................................Output Power Control page 3..................................................................Sense and Detect Circuitry page 4..............................................................Cooling Fans Control Circuitry page 6...........................................................STATION CONTROL CIRCUITRYSTATION CONTROL MODULE (CLN6960/CLN6961) 68P81094E76......................Description page 1....................................................................General Description page 1....................................................................Overview of Circuitry page 2...................................................................Controls, Indicators, and Inputs/Outputs page 3........................................Functional Theory of Operation page 4.................................................Host Microprocessor/Host ASIC Circuitry page 4.................................................Non-Volatile Memory page 5..................................................................DRAM Memory page 5........................................................................External Line Interface Circuitry page 6..........................................................Digital Signal Processor (DSP) and DSP ASIC Circuitry page 7.....................................Station Reference Circuitry page 8..............................................................HDLC Bus Control Circuitry page 8.............................................................Audio Interface Circuitry page 9................................................................Input/Output Ports page 10...................................................................6809/MRTI Interface Circuitry page 10..........................................................Front Panel LEDs and Switches page 11........................................................Supply Voltages Circuitry page 11.............................................................STATION CONTROL MODULE (CLN1614) 68P81096E87...............................Description page 1....................................................................General Description page 1....................................................................Overview of Circuitry page 2...................................................................Controls, Indicators, and Inputs/Outputs page 4........................................Functional Theory of Operation (CLN7060A Control Board) page 6.......................Host Microprocessor/Host ASIC Circuitry page 6.................................................Non-Volatile Memory page 7..................................................................DRAM Memory page 7........................................................................External Line Interface Circuitry page 8..........................................................Digital Signal Processor (DSP) and DSP ASIC Circuitry page 9.....................................Station Reference Circuitry page 10............................................................HDLC Bus Control Circuitry page 10...........................................................Audio Interface Circuitry page 11..............................................................Input/Output Ports page 12...................................................................6809/MRTI Interface Circuitry page 12..........................................................Supply Voltages Circuitry page 13.............................................................Ċcontinued on next page Ċ

vi 8/30/0268P81095E05-CFunctional Theory of Operation (CLN7098A LED Board) page 14.........................Front Panel LEDs and Switches page 14........................................................Front Panel Connectors page 14...............................................................WIRELINE CIRCUITRYWIRELINE INTERFACE BOARD (4-WIRE) 68P81094E77...............................Description page 1....................................................................General Description page 1....................................................................Overview of Circuitry page 1...................................................................Controls, Indicators, and Inputs/Outputs page 2........................................Functional Theory of Operation page 3.................................................Functional Overview page 3....................................................................Description of Audio/Data Signal Paths page 7...................................................WIRELINE INTERFACE MODULE (8-WIRE) 68P81094E78.............................Description page 1....................................................................General Description page 1....................................................................Overview of Circuitry page 1...................................................................Controls, Indicators, and Inputs/Outputs page 2........................................Functional Theory of Operation page 3.................................................Functional Overview page 3....................................................................Description of Audio/Data Signal Paths page 7...................................................STATION BACKPLANESTATION BACKPLANE BOARD 68P81086E33.........................................Description page 1....................................................................General Description page 1....................................................................Location of Backplane Connectors page 2..............................................Backplane Connectors Information page 3..............................................STATION POWER SUPPLY MODULES265W POWER SUPPLY MODULE (ac input) 68P81096E09..............................Description page 1....................................................................General Description page 1....................................................................Power Supply Module Simplified Block Diagram page 2...........................................Overview of Circuitry page 3...................................................................Performance Specifications page 6....................................................Controls, Indicators, and Inputs/Outputs page 7........................................Functional Theory of Operation (ACĆtoĆDC Converter Board) page 8......................Input Conditioning Circuitry page 8.............................................................Startup Delay Circuitry page 8..................................................................Boost/Power Factor Correction Circuitry page 9..................................................Battery Revert Trigger Circuitry page 9..........................................................VCC Supply Circuitry page 9...................................................................LED Status Indicators page 10................................................................Functional Theory of Operation (DCĆtoĆDC Converter Board) page 11.....................+14V Main Supply Circuitry page 11...........................................................Ċcontinued on next page Ċ

vii8/30/02 68P81095E05-C+5V Supply Circuitry page 12.................................................................Battery Charger Control Circuitry page 12.......................................................Reference Voltage Circuitry page 12...........................................................Diagnostics Circuitry page 13.................................................................Address Decode Circuitry page 13.............................................................Startup/Shutdown Control Circuitry page 14.....................................................Functional Theory of Operation (Battery Charger/Revert Board) page 15..................Charger Supply Circuitry page 15..............................................................Pulse Width Modulator Circuitry page 16.......................................................Battery Revert Circuitry page 16...............................................................Current Mode Controller Circuitry page 16......................................................SPI Bus Interface Circuitry page 17............................................................Shutdown Circuitry page 17...................................................................Local Supplies Circuitry page 17...............................................................625W POWER SUPPLY MODULE (ac input) 68P81095E88..............................Description page 1....................................................................Performance Specifications page 6....................................................Controls, Indicators, and Inputs/Outputs page 7........................................Functional Theory of Operation (ACĆtoĆDC Converter Board) page 8......................Input Conditioning Circuitry page 8.............................................................Startup Delay Circuitry page 8..................................................................Boost/Power Factor Correction Circuitry page 9..................................................Battery Revert Trigger Circuitry page 9..........................................................VCC Supply Circuitry page 9...................................................................LED Status Indicators page 10................................................................Functional Theory of Operation (DCĆtoĆDC Converter Board) page 11.....................+28V Main Supply Circuitry page 11...........................................................+14V Supply Circuitry page 12................................................................+5V Supply Circuitry page 12.................................................................Battery Charger Control Circuitry page 13.......................................................Reference Voltage Circuitry page 13...........................................................Diagnostics Circuitry page 13.................................................................Address Decode Circuitry page 14.............................................................Startup/Shutdown Control Circuitry page 14.....................................................Functional Theory of Operation (Battery Charger/Revert Board) page 15..................Charger Supply Circuitry page 15..............................................................Pulse Width Modulator Circuitry page 16.......................................................Battery Revert Circuitry page 16...............................................................Current Mode Controller Circuitry page 16......................................................SPI Bus Interface Circuitry page 17............................................................Shutdown Circuitry page 17...................................................................Local Supplies Circuitry page 17...............................................................210W POWER SUPPLY MODULE (12/24 and 48/60 V dc input) 68P81085E12.............Description page 1....................................................................General Description page 1....................................................................Overview of Circuitry page 2...................................................................Performance Specifications page 3....................................................Ċcontinued on next page Ċ

viii 8/30/0268P81095E05-CControls, Indicators, and Inputs/Outputs page 4........................................Functional Theory of Operation page 5.................................................Input Conditioning Circuitry page 5.............................................................Startup Inverter Circuitry page 6................................................................Main Inverter Circuitry page 6..................................................................+5 V Inverter Circuitry page 7..................................................................Diagnostics Circuitry page 8...................................................................Address Decode Circuitry page 8...............................................................600W POWER SUPPLY MODULE (24 V dc input) 68P81090E44.........................Description page 1....................................................................Performance Specifications page 3....................................................Controls, Indicators, and Inputs/Outputs page 4........................................Functional Theory of Operation page 5.................................................Input Conditioning Circuitry page 5.............................................................Startup Inverter Circuitry page 6................................................................Main Inverter Circuitry page 6..................................................................+14.2 V Inverter Circuitry page 7...............................................................+5 V Inverter Circuitry page 7..................................................................Diagnostics Circuitry page 8...................................................................Address Decode Circuitry page 8...............................................................600W POWER SUPPLY MODULE (48/60 V dc input) 68P81096E84......................Description page 1....................................................................General Description page 1....................................................................Power Supply Module Simplified Block Diagram page 2...........................................Overview of Circuitry page 3...................................................................Performance Specifications page 4....................................................Controls, Indicators, and Inputs/Outputs page 5........................................Functional Theory of Operation (DC Input Board) page 6................................Input Conditioning Circuitry page 6.............................................................Inverter Circuitry A and B page 7...............................................................Ouput Filter Circuitry page 7...................................................................Functional Theory of Operation (DC Output Board) page 8...............................Inverters A/B Control Circuitry page 8...........................................................+14.2 V Supply Circuitry page 9...............................................................+5 V Supply Circuitry page 9..................................................................Reference Voltage Circuitry page 9.............................................................Diagnostics Circuitry page 10.................................................................Address Decode Circuitry page 10.............................................................Startup/Shutdown Control Circuitry page 11.....................................................ANCILLARY EQUIPMENTANTENNA RELAY OPTIONANTENNA RELAY (Option X371AA) 68P81086E22.....................................Description page 1....................................................................General Description page 1....................................................................Input and Output Connections page 2..................................................Option Complement page 3............................................................Ċcontinued on next page Ċ

ix8/30/02 68P81095E05-CPerformance Specifications page 3....................................................Mounting Locations page 4............................................................Functional Theory of Operation page 5.................................................TRIPLE CIRCULATOR OPTIONSVHF TRIPLE CIRCULATOR OPTION (Options X676AA-AC) 68P81086E34...............Description page 1....................................................................General Description page 1....................................................................Options Complement page 2..........................................................Performance Specifications page 3....................................................Inputs/Outputs page 4................................................................Functional Theory of Operation page 5.................................................UHF TRIPLE CIRCULATOR OPTION (Options X676AN and X676AP) 68P81088E54.......Description page 1....................................................................General Description page 1....................................................................Option Complement page 2............................................................Performance Specifications page 3....................................................Inputs/Outputs page 4................................................................Functional Theory of Operation page 5.................................................800/900 MHz TRIPLE CIRCULATOR OPTION (Options X676AR and X676AQ) 68P81090E86Description page 1....................................................................General Description page 1....................................................................Option Complement page 2............................................................Performance Specifications page 2....................................................Inputs/Outputs page 3................................................................Functional Theory of Operation page 4.................................................DUPLEXER OPTIONSVHF DUPLEXERS (OPTIONS X182AA, AB, AJ) 68P81086E71...........................Description page 1....................................................................General Description page 1....................................................................Adjustments and Inputs/Outputs page 2................................................Performance Specifications page 3....................................................Typical Mounting Configuration page 3.................................................Field Tuning Procedure page 6.........................................................UHF DUPLEXER (Options X182AC thru X182AF) 68P81087E94.........................Description page 1....................................................................General Description page 1....................................................................Inputs/Outputs page 2................................................................Performance Specifications page 3....................................................Typical Mounting Configuration page 4.................................................Field Tuning Procedure page 6.........................................................Field Tuning Overview page 6..................................................................Required Test Equipment page 6...............................................................Setting Up for Tuning Duplexer page 7..........................................................Duplexer Tuning Procedure page 8.............................................................

x8/30/0268P81095E05-C800/900 MHz DUPLEXERS (Options X182AG and X182AH) 68P81091E93................Description page 1....................................................................General Description page 1....................................................................Inputs/Outputs page 2................................................................Performance Specifications page 3....................................................Typical Mounting Configuration page 3.................................................MODEM OPTIONASTRO MODEM CARD (OPTION X437AA) 68P81086E38...............................Description page 1....................................................................General Description page 1....................................................................PERIPHERAL TRAY OPTIONPERIPHERAL TRAY (OPTION X696AA) 68P81086E37..................................Description page 1....................................................................General Description page 1....................................................................Options Complement page 2..........................................................Peripheral Tray Contents and Inputs/Outputs page 3....................................UHSO OPTIONULTRA HIGH STABILITY OSCILLATOR (UHSO; Option X873AA) 68P81088E08...........Description page 1....................................................................General Description page 1....................................................................Inputs/Outputs page 2................................................................Functional Theory of Operation page 3.................................................SYSTEM APPLICATIONSRA/RT CONFIGURATION (TRC CONTROL) 68P81090E98..............................Overview page 1......................................................................Electrical Connections (RF Link) page 2................................................Console to Station 1 Wiring Connections page 2..................................................Station 2 to Station 3 Wiring Connections page 3.................................................Electrical Connections (Microwave Link) page 4........................................Console to Microwave Station 1 Wiring Connections page 4.......................................Microwave Station 2 to Station 3 Wiring Connections page 5.......................................RSS Programming page 6.............................................................TX Wireline Alignment page 7..........................................................Station 1 TX Wireline Alignment page 7..........................................................Station 2 TX Wireline Alignment page 7..........................................................Station 3 TX Wireline Alignment page 8..........................................................RA/RT CONFIGURATION (E&MKeying) 68P81090E99................................Overview page 1......................................................................Electrical Connections (RF Link) page 2................................................Console to Station 1 Wiring Connections page 2..................................................Station 2 to Station 3 Wiring Connections page 3.................................................Ċcontinued on next page Ċ

xi8/30/02 68P81095E05-CElectrical Connections (Microwave Link) page 5........................................Console to Microwave Station 1 Wiring Connections page 5.......................................Microwave Station 2 to Station 3 Wiring Connections page 6.......................................RSS Programming page 8.............................................................TX Wireline Alignment page 9..........................................................Station 1 TX Wireline Alignment page 9..........................................................Station 2 TX Wireline Alignment page 9..........................................................Station 3 TX Wireline Alignment page 10........................................................FALL BACK INĆCABINET REPEAT FEATURE 68P81095E96.............................Overview page 1......................................................................Configuring the FBICR Feature page 4.................................................MAIN / STANDBY CONFIGURATION 68P81095E89.....................................Overview page 1......................................................................Electrical Connections page 2.........................................................Setting Wireline Impedance Jumpers page 4............................................RSS Programming page 5.............................................................Main/Standby Operation page 6........................................................Customizing Main/Standby Operation page 8...........................................FAST KEYUP FEATURE 68P80800A02................................................Overview page 1......................................................................Electrical Connections page 2.........................................................RSS Programming page 4.............................................................Fast Keyup Performance Characteristics page 5........................................DUAL CONTROL OF GATED ADDESS VIA TRC AND SAM 68P81096E11.................Overview page 1......................................................................Station RSS Programming page 4......................................................SAM RSS Programming page 8........................................................INPUT/OUTPUT SPECIFICATIONS FOR EXTERNAL CONTROLLERS 68P81096E86.......Overview page 1......................................................................Electrical Connections page 2.........................................................Electrical Characteristics page 3.......................................................Editing Wildcard Tables page 8........................................................SERIAL INTERFACE SPECIFICATIONS 68P81131E57..................................Overview page 1......................................................................Making Serial Connection to Station page 1............................................Entering `'RSS Mode" page 3..........................................................Supported Commands page 4.........................................................Important Things to Know page 12....................................................., MOTOROLA, QUANTAR, and ASTRO are trademarks of Motorola, Inc.

xii 8/30/0268P81095E05-CThe sales model is T5365A (as translated from C99ED/001C).The following equipment ordering scenario is used by the sales representative to equip a Quantar stationwith the proper hardware and firmware for specific system types and customerĆdefined options and feaĆtures. The scenario is described here to explain the process and to show the structure and contents ofthe various options and models.MODEL AND OPTION SELECTION PROCEDURE(INCLUDES MODEL/OPTION COMPLEMENTS)1NOTE: The Sales Model includes only a TRN7795A Base Station Nameplate. EquipĆping the station with the proper modules is accomplished by ordering additional opĆtions, as described in the following steps.(Continued)2A System Family Option must be selected as follows:Conventional AnalogConventional ASTRO VSELPConventional ASTRO CAI6809 Trunking Analog6809 Trunking ASTRO VSELP6809 Trunking ASTRO CAISMARTZONE 6809 Trunking ASTRO VSELPSMARTZONE 6809 Trunking ASTRO CAISMARTZONE IntelliRepeater TrunkingSMARTZONE IntelliRepeater ASTRO VSELPSMARTZONE IntelliRepeater ASTRO CAISystem TypeX597X599X806X997X992X900X989X897X999X990X898FamilyOptionnnnnnnnnnnnVHF UHF 800MHZ900MHZnnnnnnnnnnnnnnnnnnnnnnnnn

xiii8/30/02 68P81095E05-CThe following tables show the available power and band options.3(Continued)UHF20W 100WOptionX250AAOptionX750AAOutputPowerFrequencyRange800 MHz800/900 MHzOutputPowerFrequencyRangeVHF High BandRange 1(132-154 MHz)VHF High BandRange 2(150-174 MHz)25W 125WOptionX330AAOptionX530AAOptionX530ABNOTE: Customer-specified frequencies which are in the 150-154 MHz range are automatically assignedto Range 2 by Order Processing unless one of the following options is ordered:X325 (125W only) Ċ Specifies Range 1 Exciter (overrides automatic assignment to Range 2) where thetransmit frequency is between 150 and 154 MHz.X326 Ċ Specifies Range 1 Receiver (overrides automatic assignment to Range 2) where the receive freĆquency is between 150 and 154 MHz.These options are typically used to ensure that the transmit and receive frequencies are in the requiredcustomer range; this is required for use with a duplexer module.VHFOutputPowerFrequencyRangeUHF Range 1(403-433 MHz)25W 100WOptionX240AA110WUHF Range 2(438-470 MHz)UHF Range 3(470-494 MHz) Not AvailableUHF Range 4(494-520 MHz) Not AvailableOptionX240AB Not AvailableNot AvailableNot AvailableOptionX640AD Not AvailableOptionX640ACOptionX640AAOptionX640ABOptionX660AA900 MHz Not AvailableUHF Range 0(380-433 MHz) Not Available OptionX640AKNot Available

xiv 8/30/0268P81095E05-CIf no other options are selected, Motorola's Order Processing appends the appropriate stanĆdard options (based on power and frequency band) to complete the station equipment list.The tables below show the completed equipment lists for the available options.If additional options are desired, they must be added to the initial order form. Step 5 lists theavailable options and the impact each has on the standard equipment configuration.4(Continued)OPTION X330AA SELECTED IN STEP 3(VHF Range 1; 25W Transmitter)OPTION X330AA SELECTED IN STEP 3(VHF Range 2; 25W Transmitter)Option/KitX330AA VHF High Band Ranges1&2;25WTransmitterTLD3110B 25 W Power Amplifier Module (VHF R1 & R2)TKN8699A PA-to-Exciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X131AA Exciter Module (VHF HighĆBand Range 1)CLD1270A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X333AA Receiver Module (VHF HighĆBand Range 1)CLD1250A Receiver Module (Board, Preselector, Hardware)CLN7334A Receiver Module Front PanelTRN7799A VHF/UHF Tuning KitCHN6100A AntiĆVibration/EFI Screws (2)X43AB Power Supply AssemblyCPN1049B 265W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AY Station Control Module (SCM); Standard EPIC IIICLN1614A Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)CGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955A Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AD Blank PanelsTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040A GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AA Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionVHFSource Option/KitX330AA VHF High Band Ranges1&2;25WTransmitterTLD3110B 25 W Power Amplifier Module (VHF R1 & R2)TKN8699A PA-to-Exciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X131AB Exciter Module (VHF HighĆBand Range 2)CLD1280A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X333AB Receiver Module (VHF HighĆBand Range 2)CLD1260A Receiver Module (Board, Preselector, Hardware)CLN7334A Receiver Module Front PanelTRN7799A VHF/UHF Tuning KitCHN6100A AntiĆVibration/EFI Screws (2)X43AB Power Supply AssemblyCPN1049B 265W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AY Station Control Module (SCM); Standard EPIC IIICLN1614A Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)CGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955A Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AD Blank PanelsTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040A GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AA Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionSource

xv8/30/02 68P81095E05-C(Continued)OPTION X530AA SELECTED IN STEP 3(VHF Range 1; 125W Transmitter)OPTION X530AB SELECTED IN STEP 3(VHF Range 2; 125W Transmitter)VHFOption/KitX530AA VHF High Band Range 1; 125W TransmitterTLD3101F 125 W Power Amplifier Module (VHF R1)TKN8699A PA-to-Exciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X131AA Exciter Module (VHF HighĆBand Range 1)CLD1270A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X333AA Receiver Module (VHF HighĆBand Range 1)CLD1250A Receiver Module (Board, Preselector, Hardware)CLN7334A Receiver Module Front PanelTRN7799A VHF/UHF Tuning KitCHN6100A AntiĆVibration/EFI Screws (2)X43AA Power Supply AssemblyCPN1047A 625W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AY Station Control Module (SCM); Standard EPIC IIICLN1614A Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)CGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955A Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AD Blank PanelsTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040A GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AA Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionSource Option/KitX530AB VHF High Band Range 2; 125W TransmitterTLD3102F 125 W Power Amplifier Module (VHF R2)TKN8699A PA-to-Exciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X131AB Exciter Module (VHF HighĆBand Range 2)CLD1280A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X333AB Receiver Module (VHF HighĆBand Range 2)CLD1260A Receiver Module (Board, Preselector, Hardware)CLN7334A Receiver Module Front PanelTRN7799A VHF/UHF Tuning KitCHN6100A AntiĆVibration/EFI Screws (2)X43AA Power Supply AssemblyCPN1047A 625W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AY Station Control Module (SCM); Standard EPIC IIICLN1614A Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)CGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955A Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AD Blank PanelsTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040A GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AA Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionSource

xvi 8/30/0268P81095E05-C(Continued)OPTION X640AK SELECTED IN STEP 3(Quantar UHF; Range 0, 110W Transmitter)UHFOption/KitX640AK Quantar UHF R0; 110W TransmitterCTX1146A 110 W Power Amplifier Module (UHF R0)TKN8699A PAĆtoĆExciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X132AV Exciter Module (UHF, R0)CLX1000A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X334BB Receiver Module (UHF, R0)CRX1027A Receiver Module (Board, Preselector, Hardware)CLN7884A Receiver Module Front Panel w/Tuning Screw CoverTRN7799A VHF/UHF Tuning KitCHN6100A AntiĆVibration/EFI Screws (2)X43AA Power Supply AssemblyCPN1047E 625W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AB Station Control Module (SCM); Standard EPIC IICLN6961D Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)TGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955B Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AD Blank PanelsTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040B GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AJ Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionSource

xvii8/30/02 68P81095E05-C(Continued)OPTION X240AA SELECTED IN STEP 3(Quantar UHF; Range 1, 25W Transmitter)OPTION X640AA SELECTED IN STEP 3(Quantar UHF; Range 1, 110W Transmitter)UHFOption/KitX240AA Quantar UHF R1; 25W TransmitterTLE2731A 25 W Power Amplifier Module (UHF R1)TKN8699A PA-to-Exciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X132AA Exciter Module (UHF, R1)CLE1230A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X334AA Receiver Module (UHF, R1)CLE1190A Receiver Module (Board, Preselector, Hardware)CLN7334A Receiver Module Front PanelTRN7799A VHF/UHF Tuning KitCHN6100A AntiĆVibration/EFI Screws (2)X43AB Power Supply AssemblyCPN1049B 265W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AY Station Control Module (SCM); Standard EPIC IIICLN1614A Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)CGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955A Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AD Blank PanelsTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040A GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AJ Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionSource Option/KitX640AA Quantar UHF R1; 110W TransmitterTTE2061A 110 W Power Amplifier Module (UHF R1)TKN8699A PA-to-Exciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X132AA Exciter Module (UHF, R1)CLE1230A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X334AA Receiver Module (UHF, R1)CLE1190A Receiver Module (Board, Preselector, Hardware)CLN7334A Receiver Module Front PanelTRN7799A VHF/UHF Tuning KitCHN6100A AntiĆVibration/EFI Screws (2)X43AA Power Supply AssemblyCPN1047A 625W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AY Station Control Module (SCM); Standard EPIC IIICLN1614A Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)CGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955A Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AD Blank PanelsTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040A GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AJ Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionSource

xviii 8/30/0268P81095E05-COPTION X240AB SELECTED IN STEP 3(Quantar UHF; Range 2, 25W Transmitter)OPTION X640AB SELECTED IN STEP 3(Quantar UHF; Range 2, 110W Transmitter)UHFOption/KitX240AB Quantar UHF R2; 25W TransmitterTLE2732A 25 W Power Amplifier Module (UHF R2)TKN8699A PA-to-Exciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X132AB Exciter Module (UHF, R2)CLE1240A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X334AB Receiver Module (UHF, R2)CLE1200A Receiver Module (Board, Preselector, Hardware)CLN7334A Receiver Module Front PanelTRN7799A VHF/UHF Tuning KitCHN6100A AntiĆVibration/EFI Screws (2)X43AB Power Supply AssemblyCPN1049B 265W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AY Station Control Module (SCM); Standard EPIC IIICLN1614A Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)CGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955A Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AD Blank PanelsTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040A GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AJ Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionSource Option/KitX640AB Quantar UHF R2; 110W TransmitterTTE2062A 110 W Power Amplifier Module (UHF R2)TKN8699A PA-to-Exciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X132AB Exciter Module (UHF, R2)CLE1240A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X334AB Receiver Module (UHF, R2)CLE1200A Receiver Module (Board, Preselector, Hardware)CLN7334A Receiver Module Front PanelTRN7799A VHF/UHF Tuning KitCHN6100A AntiĆVibration/EFI Screws (2)X43AA Power Supply AssemblyCPN1047A 625W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AY Station Control Module (SCM); Standard EPIC IIICLN1614A Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)CGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955A Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AD Blank PanelsTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040A GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AJ Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionSource(Continued)

xix8/30/02 68P81095E05-C(Continued)OPTION X640AD SELECTED IN STEP 3(Quantar UHF; Range 4, 100W Transmitter)OPTION X640AC SELECTED IN STEP 3(Quantar UHF; Range 3, 110W Transmitter)Option/KitX640AC Quantar UHF R3; 110W TransmitterTTE2063A 110 W Power Amplifier Module (UHF R3)TKN8699A PA-to-Exciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X132AC Exciter Module (UHF, R3)CLE1250A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X334AC Receiver Module (UHF, R3)CLE1210A Receiver Module (Board, Preselector, Hardware)CLN7334A Receiver Module Front PanelTRN7799A VHF/UHF Tuning KitCHN6100A AntiĆVibration/EFI Screws (2)X43AA Power Supply AssemblyCPN1047A 625W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AY Station Control Module (SCM); Standard EPIC IIICLN1614A Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)CGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955A Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AD Blank PanelsTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040A GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AJ Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionSourceUHFOption/KitX640AD Quantar UHF R4; 100W TransmitterTTE2064A 100 W Power Amplifier Module (UHF R4)TKN8699A PA-to-Exciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X132AD Exciter Module (UHF, R4)CLE1260A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X334AD Receiver Module (UHF, R4)CLE1220A Receiver Module (Board, Preselector, Hardware)CLN7334A Receiver Module Front PanelTRN7799A VHF/UHF Tuning KitCHN6100A AntiĆVibration/EFI Screws (2)X43AA Power Supply AssemblyCPN1047A 625W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AY Station Control Module (SCM); Standard EPIC IIICLN1614A Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)CGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955A Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AD Blank PanelsTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040A GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AJ Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionSource

xx 8/30/0268P81095E05-C(Continued)OPTION X250AA SELECTED IN STEP 3(800 MHz Quantar; 20W Transmitter)OPTION X750AA SELECTED IN STEP 3(800 MHz Quantar; 100W Transmitter)800 MHzOption/KitX250AA Quantar 800 MHz; 20W TransmitterTLF1940A 20 W Power Amplifier Module (800 MHz)TKN8699A PA-to-Exciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X133AA Exciter Module (800 MHz)CLF1510A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X335AA Receiver Module (800 MHz)CLF1530A Receiver Module (Board, Front Panel, Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X43AB Power Supply AssemblyCPN1049B 265W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AY Station Control Module (SCM); Standard EPIC IIICLN1614A Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)CGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955A Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AL Blank PanelsTRN7695A Single Slot Wide Blank PanelTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040A GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AH Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionSource Option/KitX750AA Quantar 800 MHz; 100W TransmitterTLF1930C 100 W Power Amplifier Module (800 MHz)TKN8699A PA-to-Exciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X133AA Exciter Module (800 MHz)CLF1510A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X335AA Receiver Module (800 MHz)CLF1530A Receiver Module (Board, Front Panel, Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X43AA Power Supply AssemblyCPN1047A 625W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AY Station Control Module (SCM); Standard EPIC IIICLN1614A Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)CGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955A Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AL Blank PanelsTRN7695A Single Slot Wide Blank PanelTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040A GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AH Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionSource

xxi8/30/02 68P81095E05-C(Continued)OPTION X660AA SELECTED IN STEP 3(900 MHz; 100W Transmitter)900 MHzOption/KitX660AA Quantar 900 MHz; 100W TransmitterTLF1800B 100 W Power Amplifier Module (900 MHz)TKN8699A PA-to-Exciter RF CableTRN7480A Station Interconnect Board (Backplane)TRN7708A PA Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X134AA Exciter Module (900 MHz)CLF1520A Exciter Module (Board and Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X336AA Receiver Module (900 MHz)CLF1540A Receiver Module (Board, Front Panel, Hardware)CHN6100A AntiĆVibration/EFI Screws (2)X43AA Power Supply AssemblyCPN1047A 625W Power Supply (AC input; w/o battery chrg)CLN7261A Ferrite RFI SuppressorCPN6086A Front Panel, Dummy Charger ConnectorCHN6100A AntiĆVibration/EFI Screws (2)X621AY Station Control Module (SCM); Standard EPIC IIICLN1614A Station Control ModuleTRN7476A SCM Internal SpeakerTKN8751A Internal Speaker CableX222AB Front Panel (Station Control Module)CGN6157A Station Control Module Front PanelCHN6100A AntiĆVibration/EFI Screws (2)X216AA Wireline Interface Module (WIM) (4-wire)CLN6955A Wireline Interface BoardTKN8731A WIM CableCLN6816A RFI SuppressorC831AA Card CageTRN7479A Card Cage Assembly (12")X142AA Duplex Interface AssemblyTRN7494A Duplex Interface (includes ant. connector bracket)X249AW RF CablingTKN8753A Receiver mini-UHF to N-type coax cableTKN9126A Transmitter N-type to N-type coax cableX187AA Domestic Power CableTRN7663A AC Line CordX163AL Blank PanelsTRN7695A Single Slot Wide Blank PanelTRN7696A Dual Slot Wide Blank PanelCHN6100A AntiĆVibration/EFI Screws (2)X842AB Ethernet Termination KitCLN6885A Ethernet Termination HardwareX430AA 12" CabinetTHN6700A 12" x 20" CabinetTTN5040A GrommetX362AA PackingTBN6625A Packing for 12" CabinetX436AD Instruction Manual68P81095E05 Quantar Station Functional ManualOptionfrom InitialSales OrderOptions/KitsInternally Addedby MotorolaOrderProcessingDescriptionSource

xxii 8/30/0268P81095E05-CThe following lists available options that may be selected in addition to the standard modeland options (described in Steps 1 thru 4).5AVAILABLE HARDWARE OPTIONS FOR QUANTAR STATIONOptionCategory Option and ComplementAC Input SuppliesX30AA 625W Power Supply with Battery ChargerąCPN1048C 625W Power Supply Assembly w/ Battery ChargerąTKN8732A Battery Charger Cable KitąTKN8786A Battery Temperature SensorąTRN5155A 10' Extension Cable w/connectors and fuse blockąCHN6100A AntiĆVibration/EFI Screws (2)ąCLN7261A AC Line Cord Ferrite RFI SuppressorąCLN7419A Power Supply Front Panel w/ScrewsDC Input SuppliesX121AA 210W Power Supply (12/24V DC Input)ąTRN7802A 210W Power Supply Assembly (12/24 V DC Input)ąTKN8732A Battery Charger Cable KitąTRN5155A 10' Extension Cable w/connectors and fuse blockąCHN6100A AntiĆVibration/EFI Screws (2)PowerSupplyX30AB 265W Power Supply with Battery ChargerąCPN1050E 265W Power Supply Assembly w/ Battery ChargerąTKN8732A Battery Charger Cable KitąTKN8786A Battery Temperature SensorąTRN5155A 10' Extension Cable w/connectors and fuse blockąCHN6100A AntiĆVibration/EFI Screws (2)ąCLN7261A AC Line Cord Ferrite RFI SuppressorąCPN6086APower Supply Front Panel w/ScrewsX112AA 600W Power Supply (24V DC Input)ąTRN7801A 600W Power Supply Assembly (24 V DC Input)ąTKN8732A Battery Charger Cable KitąTRN5155A 10' Extension Cable w/connectors and fuse blockąCHN6100A AntiĆVibration/EFI Screws (2)X113AA 210W Power Supply (48/60 V DC Input)ąTRN7803A 210W Power Supply Assembly (48/60 V DC Input)ąTKN8732A Battery Charger Cable KitąTRN5155A 10' Extension Cable w/connectors and fuse blockąCHN6100A AntiĆVibration/EFI Screws (2)X113AB 600W Power Supply (48/60 V DC Input)ąCPN1031B 600W Power Supply Assembly (48/60 V DC Input)ąTKN8732A Battery Charger Cable KitąTRN5155A 10' Extension Cable w/connectors and fuse blockąTTN4068A Power Supply Front Panel and ScrewsąCHN6100A AntiĆVibration/EFI Screws (2)WirelineInterfaceModuleX84AA Omit Standard Wireline Interface Module (WIM)X144AA Add 8-Wire Wireline Interface Module (WIM)CLN6956A 8-Wire Wireline Interface Board (WIB)TKN8731A WIM Cable KitCLN6816A RFI SuppressorAntennaRelayX371AA Add Antenna RelayTRN7664A Antenna Relay, Cables, and Mounting HardwareDuplexerX182BV Add Duplexer Module (UHF R0)0185417U10 Duplexer (UHF R0; 380-412 MHz)TTN5008A Duplexer Mtg HdwrX182AC Add Duplexer Module (UHF R1)0185417U04 Duplexer (UHF R1)TTN5008A Duplexer Mtg HdwrX182AD Add Duplexer Module (UHF R2)0185417U05 Duplexer (UHF R2)TTN5008A Duplexer Mtg HdwrX182AE Add Duplexer Module (UHF R3)0185417U06 Duplexer (UHF R3)TTN5008A Duplexer Mtg HdwrX182AF Add Duplexer Module (UHF R4)0185417U07 Duplexer (UHF R4)TTN5008A Duplexer Mtg HdwrX182AA Add Duplexer Module (132-146 MHz)0185417U01 Duplexer (132-146 MHz)TTN5008A Duplexer Mtg HdwrX182AB Add Duplexer Module (144-160MHz)0185417U02 Duplexer (144-160 MHz)TTN5008A Duplexer Mtg HdwrX182AJ Add Duplexer Module (158-174 MHz)0185417U03 Duplexer (158-174 MHz)TTN5008A Duplexer Mtg HdwrX182AG Add Duplexer Module (800 MHz)TDF6980A Duplexer (800 MHz)TTN5008A Duplexer Hardware (4 screws)X182AH Add Duplexer Module (900 MHz)TDF6542A Duplexer (900 MHz)TTN5008A Duplexer Hardware (4 screws)Modem X437AA Add ASTRO ModemTRN7668A ASTRO Modem Card

xxiii8/30/02 68P81095E05-COptionCategory Option and ComplementCirculatorCA00187AA Add Triple Circulator (UHF, R0)TLE9120B Dual CirculatorTLN3391A 50 Ohm Load with Heat SinkTLE9140A Low Pass FilterTRN7796A Fan, Peripheral TrayX676AN Add Triple Circulator (UHF, R1 and R2)TLE9120A Dual CirculatorTLN3391A 50 Ohm Load with Heat SinkTLE9140A Low Pass FilterTRN7796A Fan, Peripheral TrayX676AP Add Triple Circulator (UHF, R3 and R4)TLE9130A Dual CirculatorTLN3391A 50 Ohm Load with Heat SinkTLE9140A Low Pass FilterTRN7796A Fan, Peripheral TrayX676AA Add Triple Circulator (132-146 MHz)TYD4001A Dual CirculatorTLN3391A 50 Ohm Load with Heat SinkTYD4010A Low Pass FilterTRN7796A Cooling FanX676AB Add Triple Circulator (144-160 MHz)Same as X676AA except substitute TYD4002A Dual CirculatorX676AC Add Triple Circulator (158-174 MHz)Same as X676AA except substitute TYD4003A Dual CirculatorX676AQ Add Triple Circulator (800 MHz)TLF7320A Dual CirculatorTLN3391A 50 Ohm Load with Heat SinkTLF7340A Low Pass FilterTRN7796A Fan, Peripheral TrayX676AR Add Triple Circulator (900 MHz)TLF7330A Dual CirculatorTLN3391A 50 Ohm Load with Heat SinkTLF7340A Low Pass FilterTRN7796A Fan, Peripheral TrayUHSOX873AA Add Internal Ultra High Stability OscillatorCLN7012A BNC TerminatorCHN6100A AntiĆVibration/EFI Screws (2)CLN1477A UHSO ModuleąTTN5070CąUHSO BoardąTTN5071AąUHSO Housing and Front PaneląTTN5072AąUHSO 5 PPB Ovenized ElementPeripheralTrayX696AA Add Peripheral TrayTRN7751A Quantar Peripheral ShelfMiscellaneousHSN1000 External SpeakerTRN7738A External Speaker Hardware (bracket and cable)HMN1001A MicrophoneNote that the external speaker and microphone are not options and must beordered as line items on the STIC-1 order form.

xxiv 8/30/0268P81095E05-CFOREWORDProduct MaintenancePhilosophyDue to the high percentage of surfaceĆmount components andmulti-layer circuit boards, the maintenance philosophy for this prodĆuct is one of Field Replaceable Unit (FRU) substitution. The station iscomprised of selfĆcontained modules (FRUs) which, when determinedto be faulty, may be quickly and easily replaced with a known goodmodule to bring the equipment back to normal operation. The faultymodule must then be shipped to the Motorola System Support Centerfor further troubleshooting and repair to the component level.Scope of ManualThis manual is intended for use by experienced technicians familiarwith similar types of equipment. In keeping with the maintenance phiĆlosophy of Field Replaceable Units (FRU), this manual contains funcĆtional information sufficient to give service personnel an operationalunderstanding of all FRU modules, allowing faulty FRU modules to beidentified and replaced with known good FRU replacements.The information in this manual is current as of the printing date.Changes which occur after the printing date are incorporated by InĆstruction Manual Revisions (SMR). These SMRs are added to the manĆuals as the engineering changes are incorporated into the equipment.

xxv8/30/02 68P81095E05-CService andReplacement ModulesMotorola System Support Center2214 Galvin DriveElgin, IL 601231-800-221-7144Int'l 1-847-576-7300FAX 1-847-576-2172For complete information on ordering FRU replacement modules, orinstructions on how to return faulty modules for repair, contact the SysĆtem Support Center (see sidebar).The following FRU replacement modules are available:Receiver Module (VHF Range 1) TLN3250AReceiver Module (VHF Range 2) TLN3251AReceiver Module (UHF, Range 0) DLN1215AReceiver Module (UHF, Range 1) TLN3313AReceiver Module (UHF, Range 2) TLN3314AReceiver Module (UHF, Range 3) TLN3373AReceiver Module (UHF, Range 4) TLN3374AReceiver Module (800 MHz) TLN3315AReceiver Module (900 MHz) TLN3316AExciter Module (VHF Range 1) TLN3252AExciter Module (VHF Range 2) TLN3253AExciter Module (UHF, Range 0) DLN1214AExciter Module (UHF, Range 1) TLN3305AExciter Module (UHF, Range 2) TLN3306AExciter Module (UHF, Range 3) TLN3375AExciter Module (UHF, Range 4) TLN3376AExciter Module (800 MHz) TLN3307AExciter Module (900 MHz) TLN3308APower Amplifier Module (VHF 25W, R1 & R2) TLN3255APower Amplifier Module (VHF 125W, R1) TLN3379APower Amplifier Module (VHF 125W, R2) TLN3254APower Amplifier Module (UHF R0; 110W) DLN1216APower Amplifier Module (UHF R1; 25W) TLN3443APower Amplifier Module (UHF R2; 110W) TLN3446APower Amplifier Module (UHF R4; 100W) TLN3450APower Amplifier Module (800 MHz 20W) TLN3441APower Amplifier Module (800 MHz 100W) TLN3442APower Amplifier Module (900 MHz 100W) TLN3299AStation Control Module (Conventional/6809) CLN1293AStation Control Module (Conventional/6809 EPIC III) CLN1621AStation Control Module (IntelliRepeater) CLN1294A4-Wire Wireline Interface Module CLN1295A8-Wire Wireline Interface Module CLN1296APower Supply Module (625W AC) TLN3259APower Supply Module (625W AC w/charger) TLN3260APower Supply Module (265W AC) TLN3261APower Supply Module (265W AC w/charger) TLN3262APower Supply Module (210W 12/24 V DC) TLN3264APower Supply Module (210W 48/60 V DC) TLN3378APower Supply Module (600W 24 V DC) TLN3263APower Supply Module (600W 48/60 V DC) TLN3377AASTRO Modem Card TLN3265A

xxvi 8/30/0268P81095E05-CGENERAL SAFETY INFORMATIONThe following general safety precautions must be observed during all phases of operation, service, and repair ofthe equipment described in this manual. The safety precautions listed below represent warnings of certain dangersof which we are aware. You should follow these warnings and all other safety precautions necessary for the safeoperation of the equipment in your operating environment.General Safety Precautions"Read and follow all warning notices and instructions marked on the product or included in this manual beĆfore installing, servicing or operating the equipment. Retain these safety instructions for future reference.Also, all applicable safety procedures, such as Occupational, Safety, and Health Administration (OSHA)requirements, National Electrical Code (NEC) requirements, local code requirements, safe working practicĆes, and good judgement must be used by personnel."Refer to appropriate section of the product service manual for additional pertinent safety information."Because of danger of introducing additional hazards, do not install substitute parts or perform any unauthoĆrized modifications of equipment."Identify maintenance actions that require two people to perform the repair. Two people are required when:- A repair has the risk of injury that would require one person to perform first aid or call for emergencysupport. An example would be work around high voltage sources. A second person may be requiredto remove power and call for emergency aid if an accident occurs to the first person.NoteąUse the National Institute of Occupational Safety and Health (NIOSH) lifting equation to deterĆmine whether a one or two person lift is required when a system component must be removed and reĆplaced in its rack."If troubleshooting the equipment while power is applied, be aware of the live circuits."DO NOT operate the transmitter of any radio unless all RF connectors are secure and all connectors areproperly terminated."All equipment must be properly grounded in accordance with Motorola Standards and Guideline for ComĆmunications Sites R56" 68P81089E50 and specified installation instructions for safe operation."Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the productand to protect if from overheating, these slots and openings must not be blocked or covered."Only a qualified technician familiar with similar electronic equipment should service equipment."Some equipment components can become extremely hot during operation. Turn off all power to the equipĆment and wait until sufficiently cool before touching.Human Exposure ComplianceThis equipment is designed to generate and radiate radio frequency (RF) energy by means of an external antenna.When terminated into a non-radiating RF load, the base station equipment is certified to comply with Federal ComĆmunications Commission (FCC) regulations pertaining to human exposure to RF radiation in accordance with theFCC Rules Part 1 section 1.1310 as published in title 47 code of federal regulations and procedures establishedin TIA/EIA TSB92, Report On EME Evaluation for RF Cabinet Emissions Under FCC MPE Guidelines. Complianceto FCC regulations of the final installation should be assessed and take into account site specific characteristics

xxvii8/30/02 68P81095E05-Csuch as type and location of antennas, as well as site accessibility of occupational personnel (controlled environĆment) and the general public (uncontrolled environment). This equipment should only be installed and maintainedby trained technicians. Licensees of the FCC using this equipment are responsible for insuring that its installationand operation comply with FCC regulations Part 1 section 1.1310 as published in title 47 code of federal regulations.Whether a given installation meets FCC limits for human exposure to radio frequency radiation may depend not onlyon this equipment but also on whether the environments" being assessed are being affected by radio frequencyfields from other equipment, the effects of which may add to the level of exposure. Accordingly, the overall exposuremay be affected by radio frequency generating facilities that exist at the time the licensee's equipment is beinginstalled or even by equipment installed later. Therefore, the effects of any such facilities must be considered in siteselection and in determining whether a particular installation meets the FCC requirements.FCC OET Bulletin 65 provides materials to assist in making determinations if a given facility is compliant with thehuman exposure to RF radiation limits. Determining the compliance of transmitter sites of various complexities maybe accomplished by means of computational methods. For more complex sites direct measurement of the powerdensity may be more expedient. Additional information on the topic of electromagnetic exposure is contained inthe Motorola Standards and Guideline for Communications Sites publication. Persons responsible for installationof this equipment are urged to consult the listed reference material to assist in determining whether a given installaĆtion complies with the applicable limits.In general the following guidelines should be observed when working in or around radio transmitter sites:"All personnel should have electromagnetic energy awareness training"All personnel entering the site must be authorized"Obey all posted signs"Assume all antennas are active"Before working on antennas, notify owners and disable appropriate transmitters"Maintain minimum 3 feet clearance from all antennas"Do not stop in front of antennas"Use personal RF monitors while working near antennas"Never operate transmitters without shields during normal operation"Do not operate base station antennas in equipment roomsFor installations outside of the U.S., consult with the applicable governing body and standards for RF energy humanexposure requirements and take the necessary steps for compliance with local regulations.ReferencesTIA/EIA TSB92 Report On EME Evaluation for RF Cabinet Emissions Under FCC MPE Guidelines," Global EngiĆneering Documents: http://global.ihs.com/FCC OET Bulletin 65 Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency ElectroĆmagnetic Fields": http://www.fcc.gov/oet/rfsafety/.Motorola Standards and Guideline for Communications Sites, Motorola manual 68P81089E50.IEEE Recommended Practice for the Measure of Potentially Hazardous Electromagnetic Fields - RF and MicroĆwave, IEEE Std C95.3-1991, Publication Sales, 445 Hoes Lane, P.O. Box 1331, Piscattaway, NJ 08855-1331IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3kHz to 300 GHz, IEEE C95.1-1991, Publication Sales, 445 Hoes Lane, P.O. Box 1331, Piscattaway, NJ 08855-1331.

xxviii 8/30/0268P81095E05-CPERFORMANCE SPECIFICATIONSGeneralTX Sub-Band RangeVHF UHF 800 900132-154 MHz (R1) 380-433 MHz (R0) 851-870 MHz 935-941 MHz403-433 MHz (R1)150-174 MHz (R2) 438-470 MHz (R2)470-494 MHz (R3)494-520 MHz (R4)RX Sub-Band RangeVHF UHF 800 900132-154 MHz (R1) 380-433 MHz (R0) 806-825 MHz 896-902 MHz403-433 MHz (R1)150-174 MHz (R2) 438-470 MHz (R2)470-494 MHz (R3)494-520 MHz (R4)Number of Channels 16Channel Spacing VHF: 30, 25, 12.5 kHz UHF/800: 12.5, 25 kHz 900: 12.5 kHzFrequency Generation SynthesizedPower Supply Type SwitchingPower Supply Input Voltage 90-280 V acPower Supply Input Frequency 47-63 HzBattery Revert 12V (25W radios)24V (100W, 110W, and 125W radios)T/R Separation (without duplexer option) VHF/UHF: Any spacing within same subĆband 800: 45 MHz 900: 39 MHzT/R Separation (with duplexer option) VHF/UHF: 1.5 MHz 800: 45 MHz 900: 39 MHzTemperature Range (ambient) Ċ30_Cto+60_C

xxix8/30/02 68P81095E05-CPERFORMANCE SPECIFICATIONS (Cont'd)ReceiverI-F FrequenciesVHF UHF 800 90021.45 MHz (1st) 73.35 MHz (1st) 73.35 MHz (1st) 73.35 MHz(1st)450 kHz (2nd) 450 kHz (2nd) 450 kHz (2nd) 450 kHz (2nd)Preselector Bandwidth VHF/UHF: 4 MHz 800: 19 MHz 900: 6 MHzSensitivity (12 dB SINAD) VHF: 0.25 mVUHF: 0.35 mV800/900: 0.30 mVSensitivity (20 dB Quieting) VHF: 0.35 mVUHF: 0.5 mV800/900: 0.42 mVAdjacent Channel RejectionVHF UHF 800 90090 dB (25/30 kHz) 75 dB (12.5 kHz) 70 dB (12.5 kHz) 70dB80 dB (23.5 kHz) 85 dB (25 kHz) 80 db (25 kHz)Intermodulation RejectionVHF UHF 800 90085 dB (25/30 kHz) 85 dB 85 dB 70 dB80 dB (30 kHz)Spurious and Image Rejection 100 dBWireline Output -20 dBm to 0 dBm @ 60% Rated System Deviation, 1 kHzAudio Response (Analog Mode) +1,-3dB from6 dBper octavede-emphasis;300-3000 Hzreferenced to1000Hz at line inputAudio Distortion Less than 3% @ 1000 HzFM Hum and Noise (300 to 3000 kHz bandĆwidth)VHF UHF 800 90050 dB (25/30 kHz) 45 dB (12.5 kHz) 45 dB (12.5 kHz) 45 db45 dB (12.5 kHz) 50 dB (25 kHz) 50 dB (25 kHz)Frequency Stability VHF/UHF/800: 1 ppm 900: 0.1 ppmRF Input Impedance 50 WFCC Designation (FCC Rule Part 15) VHF: ABZ89FR3776 UHF: ABZ89FR4796 800: ABZ89FR5757900: ABZ89FR5768

xxx 11/08/0268P81095E05-CPERFORMANCE SPECIFICATIONS (Cont'd)TransmitterPower OutputVHF UHF 800 9006-25W 5-25W 5-20W 25-100W25-125W 25-110W 20-100WElectronic Bandwidth Full sub-bandIntermodulation AttenuationVHF: 20 dB (single circulator; standard on all PAs)65 dB (triple circulator - requires triple circulator option)UHF: 50 dB (single circulator; standard on all PAs)800: 50 dB (single circulator; standard on all PAs)900: 20 dB (single circulator; standard on all PAs)70 dB (triple circulator - requires triple circulator option)SpuriousandHarmonicEmissionsAttenuation 90 dBDeviationVHF, UHF, and 800 900±5 kHz (25 kHz) ±2.5 kHz±2.5 kHz (12.5 kHz)Audio Sensitivity -35 dBm to 0 dBm (variable)Audio Response (Analog Mode) +1, -3 dB from 6 dB per octave pre-emphasis; 300-3000 Hz referenced to1000 Hz at line inputAudio Distortion Less than 2% @ 1000 Hz @ 60% rated system deviationFMHum andNoise (300to3000Hzbandwidth) 45 dB nominal (12.5 kHz)50 dB nominal (25/30 kHz)Frequency Stability VHF, UHF, 800:1ppm900:0.1ppmRF Output Impedance 50 WVHF 25W: ABZ89FC3774 (Parts 22, 74, 80, 90); ABZ89FC3774-D (Part 90)125W: ABZ89FC3773 (Parts 22, 74, 80, 90); ABZ89FC3773-D (Part 90)FCC DesignationUHF 25W/R1-2: ABZ89FC4797 (Parts 22, 74, 90); ABZ89FC4797-D (Part 90)110W/R0-1: ABZ89FC4798-D (Part 90); ABZ89FC4798-A (Part 90)110W/R1-4: ABZ89FC4798 (Part 22, 74, 90)(Derate R4 to 100W; 100W limit for Part 74 operation R1-4)800 20W: ABZ89FC5775 (Parts 22, 90); ABZ89FC5775-D (Part 90)100W: ABZ89FC5776 (Parts 22, 90); ABZ89FC5776-D (Part 90)FCC Designation 900100W: ABZ89FC5767 (FCC Rule Part 90)Measurement Methods per TIA/EIA-603Specifications subject to change without notice

Navigation menu