Motorola Solutions 89FT3809 Portable Two-Way Portable Radio User Manual BPR40 UG text Eng EME

Motorola Solutions, Inc. Portable Two-Way Portable Radio BPR40 UG text Eng EME

Contents

Ex8a Users Manual

Download: Motorola Solutions 89FT3809 Portable Two-Way Portable Radio User Manual BPR40 UG text Eng EME
Mirror Download [FCC.gov]Motorola Solutions 89FT3809 Portable Two-Way Portable Radio User Manual BPR40 UG text Eng EME
Document ID651927
Application IDcipOvDVIUZboFyVyWxS/PQ==
Document DescriptionEx8a Users Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize189.15kB (2364398 bits)
Date Submitted2006-04-27 00:00:00
Date Available2006-06-05 00:00:00
Creation Date2006-03-02 16:52:12
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2006-04-20 14:13:34
Document TitleBPR40_UG_text_Eng_EME.fm
Document CreatorPScript5.dll Version 5.2.2
Document Author: cal066

1301 E. Algonquin Rd., Schaumburg, IL 60196
Printed in Korea. 03/06. All Rights Reserved.
6881098C61-B
*6881098C61*
Mag One™ by Motorola is registered in the U.S. Patent and Trademark Office.
All other products and service names are the property of their own respective owners.
© Motorola, Inc. 2005, 2006
ATTENTION!
This radio is restricted to occupational use only to satisfy FCC RF energy exposure
requirements. Before using this product, read the RF energy awareness information and operating
instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola
Publication part number 6881095C98) to ensure compliance with RF energy exposure limits.
For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web
site which lists approved accessories: http://www.motorola.com/governmentandenterprise
Before using this product, read the operating instructions for safe usage contained in the
Product Safety and RF Exposure booklet enclosed with your radio.
PRODUCT SAFETY AND RF EXPOSURE COMPLIANCE
Attaching and Removing the Antenna
Attaching and Removing the Battery
Attaching and Removing the Belt Clip
Charging your Radio
Release Tab
Charger Pocket
Threaded End
of Antenna
Antenna
Connector
1.
Turn off your radio and the A/C power supply to your charger (if they are turned on).
2.
Place your radio in the charger pocket.
3.
Turn on the charger’s A/C power supply.
4.
While charging your radio, the charger’s
LED shows a steady red light. The radio
should be charged at least 16 hours initially
before decreasing charging time to 12 hours.
5.
Turn off the charger’s A/C power supply,
and remove the radio from the charger
pocket.
6.
For more details, refer to the Charger
Manual (6881013Y27).
To Attach Battery
To Attach Antenna
1.
2.
Fasten the antenna to the radio by placing
the threaded end of the antenna into the
Antenna Connector.
Rotate the antenna clockwise until tight.
To Remove Antenna
1.
Turn the antenna in a counter-clockwise
direction until it disengages from the radio.
1.
2.
Align and fit the battery tongue into the
groove of the chassis of the radio.
1.
Secure the latch at the bottom of the radio.
To Remove Battery
1.
To Attach Belt Clip
Unlatch the battery clasp at the bottom of
the radio.
2.
Gently lift the hilt of the battery nearest to
the battery latch away from the housing.
3.
Slide battery downwards to remove.
2.
Align mounting rails of the radio with the
grooves of the belt clip.
Slide the belt clip downwards until it clicks
into place.
To Remove Belt Clip
1.
Lift the release tab.
2.
Slide the belt clip upwards.
LED Indicator
• Colors indicate various states
of the radio
On/Off and Volume Knob
• Turn clockwise to turn radio ON
and increase volume.
• Turn counter-clockwise to decrease
volume and turn radio OFF.
LED Indicators
Colour
Channel Knob
• Turn knob to change channel.
Red
Green
Accessory Connector
• To connect compatible accessories to radio.
State
Illuminated
Blinking
Illuminated
Blinking
Illuminated
Blinking
Orange
Indication
Radio is transmitting.
Battery voltage is low.
Radio is receiving with PL/DPL disabled.
Radio is in active scanning mode.
Radio is receiving with PL/DPL enabled.
An error has occured.
Audio Alert Tones
Tone Name
Push-to-Talk (PTT) button
• Press to transmit and release
to receive messages.
Programmable Buttons
• Frequently used features can
be programmed here.
Programming Port
• To program the radio.
Speaker
• Where received messages are
heard.
Microphone
• Speak into microphone when sending message.
Accessories
Types
Part No.
PMAD4050_R
Antenna
PMAD4051_R
PMAE4019_R
PMAE4020_R
Audio Accessory PMMN4008_
PMLN4442_
PMLN4443_
PMLN4445_
PMLN4294_
PMLN4605_
PMLN4606_
PMLN4658 _
Battery
PMNN4071_R
Carry Accessory PMLN4743_
PMLN4691_R
PMLN4741_
PMLN4742_
Charger
PMLN4685_R
PMLN4738_R
PMLN4682_R
PMLN4683_R
PMLN4829_R
PMLN4822_R
Description
Mag One 136-150MHz Antenna
Mag One 150-174MHz Antenna
Mag One 403-425MHz Antenna
Mag One 450-470MHz Antenna
Remote Speaker Microphone
Earbud with in-line mic and PTT/VOX* Switch
Ear Receiver with in-line mic and PTT/VOX* Switch
Ultra Lightweight Headset with In-line PTT/VOX* Switch
Earbud with Microphone & PTT Combined
Clear Acoustic Kit
2-Wire Surveillance Kit with Clear Acoustic Tube
D-shell Earset with Boom Mic with PTT/VOX* Switch
Mag One NiMH batt 1200mAH
Mag One Spring Belt Clip
Mag One Belt Clip
Mag One Soft Leather Carry Case
Mag One Hard Leather Carry Case
Mag One Mid-rate Charger Base Only
Mag One Mid-rate Charger Kit, 120 V
Mag One Slow Charger Base Only
Mag One Slow Charger Kit, 120 V
Mag One Mid-rate Transformer, 120 V
Mag One Slow Transformer, 120 V
*Caution: Your radio does not support the VOX feature. Please set the accessory switch to ‘PTT’. If the accessory switch
is set to ‘VOX’, your radio transmits constantly and never receives.
Tone Cadence
Description
In Chirp Tone
Out Chirp Tone
Programmable buttons are pressed.
Programmable buttons are pressed.
Invalid programmable button function (i.e. pressing
programmable button while button lock is activated.)
Continuous tone is heard if PTT is pressed when transmit is
not allowed.
Repeating tone heard if battery level is low.
Bad Key Chirp
Tone
Talk Prohibit
Tone
Low Battery
Alert Tone
Priority
Channel Alert
Tone
Received priority channel in Priority Scan mode.
Low Tone
High Tone
Programmable Buttons
• The following functions can be assigned as short press (press and release) or long press (press and hold
for 1 second) in the programmable buttons.
Button
Function
High/Low Power
Selects desired power level to High† or Low*.
Volume Set
Allows you to check the audio and alert tone volume level.
Monitor
Allows you to monitor the current channel for activity; disables squelch.
Sticky Monitor*
The radio monitors continually until you press this button again.
Scan
Starts* or Stops† channel scan.
Nuisance Channel Delete† Removes unwanted channel(s) temporarily from scan list during scan.
Repeater/Talkaround
Toggles radio between functioning in Repeater mode† or Talkaround mode*.
PL/DPL
Enables†/Disables* radio from requiring matching PL/DPL to receive messages.
Button Lock
Locks* or unlocks† all buttons except PTT, Channel Knob and On/Off/Volume Knob.
Battery Save Mode
Toggles between functioning with Battery Saver ON* or Battery Saver OFF†.
Squelch
Selects desired squelch level: Normal† or Tight*.
No Operation
No function is programmed to this button.
† In Chirp Tone
* Out Chirp Tone
• Your radio’s default functions are described below. If re-programmed, enter the new functions .
Press Type
Programmable Button 1
Programmable Button 2
Default
Re-programmed
Default
Short Press
Monitor
Scan
Long Press
Sticky Monitor
Nuisance Channel Delete
Re-programmed

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:7c814411-6602-45a6-a915-0b1e382ede58
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2006:04:20 14:13:34+08:00
Create Date                     : 2006:03:02 16:52:12+08:00
Metadata Date                   : 2006:04:20 14:13:34+08:00
Document ID                     : uuid:959203a1-f67d-4af4-af79-784f1cea1696
Format                          : application/pdf
Title                           : BPR40_UG_text_Eng_EME.fm
Creator                         : cal066
Author                          : cal066
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AZ489FT3809

Navigation menu