Motorola Solutions 89FT3831 VHF-MURS HANDHELD TRANSCEIVER User Manual RDX Series Two Way Radios

Motorola Solutions, Inc. VHF-MURS HANDHELD TRANSCEIVER RDX Series Two Way Radios

UserManual.wiki >

Motorola Solutions >

89FT3831 User Manual >

Contents

User Guide

User GuideGuide de l’utilisateurRM Series/Séries RM Two-Way RadiosRadios bidirectionnellesModels RMU2040, RMM2050 / Modèles RMU2043

CONTENTSEnglish 1CONTENTSContents . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Introduction . . . . . . . . . . . . . . . . . . . . . . . . .5Package Contents. . . . . . . . . . . . . . . . . . . . . .5Canada Licensing Information . . . . . . . . . .7General Information. . . . . . . . . . . . . . . . . . . . .7The License Application . . . . . . . . . . . . . . . . .7Batteries and Chargers Safety Information . . . . . . . . . . . . . . . . . . . .8Operational Safety Guidelines. . . . . . . . . . . . .9Radio Overview . . . . . . . . . . . . . . . . . . . . .10Parts of the Radio . . . . . . . . . . . . . . . . . . . . .10On/Off/Volume Knob. . . . . . . . . . . . . . . .11Accessory Connector . . . . . . . . . . . . . . .11Model Label . . . . . . . . . . . . . . . . . . . . . .11Microphone . . . . . . . . . . . . . . . . . . . . . . .11Antenna . . . . . . . . . . . . . . . . . . . . . . . . . 11LED Indicator . . . . . . . . . . . . . . . . . . . . . 11Side Buttons . . . . . . . . . . . . . . . . . . . . . 11The Lithium-Ion (Li-Ion) Battery . . . . . . . 11Battery Features. . . . . . . . . . . . . . . . . . . . . . 13About the Li-Ion Battery . . . . . . . . . . . . . 13Battery Recycling and Disposal . . . . . . . 14Installing the Lithium-Ion (Li-Ion) Battery . . . . . . . . . . . . . . . . . . . . 15Removing the Lithium-Ion (Li-Ion) Battery . . . . . . . . . . . . . . . . . . . . 15Power Supply, Adaptor and Drop-in Tray Charger. . . . . . . . . . . . . . . 17Battery Life Information . . . . . . . . . . . . . 18Charging the Battery . . . . . . . . . . . . . . . 20FCC Licensing Information . . . . . . . . . . . . .7

CONTENTSEnglish 2Getting Started . . . . . . . . . . . . . . . . . . . . . .27Turning radio ON/OFF. . . . . . . . . . . . . . . . . .27Adjusting Volume . . . . . . . . . . . . . . . . . . . . .27Selecting a Channel . . . . . . . . . . . . . . . . . . .27Talking and Monitoring . . . . . . . . . . . . . . . . .27Receiving a Call . . . . . . . . . . . . . . . . . . . . . .28Talk Range . . . . . . . . . . . . . . . . . . . . . . . . . .28Radio LED Indicators . . . . . . . . . . . . . . . . . .30Hands-Free Use/VOX . . . . . . . . . . . . . . . . . .31With Compatible VOX Accessories. . . . .31Setting VOX Sensitivity. . . . . . . . . . . . . .32Microphone Gain. . . . . . . . . . . . . . . . . . .32Battery Save . . . . . . . . . . . . . . . . . . . . . .32Reset to Factory Defaults . . . . . . . . . . . .32End of Transmission Tone (Roger Beep Tone) . . . . . . . . . . . . . . . . .33Programming Features . . . . . . . . . . . . . . .34Programming Mode. . . . . . . . . . . . . . . . . . . .34Reading the Values the Radio Signals You . . . . . . . . . . . . . . . . .34Entering Programming Mode . . . . . . . . .37Reading Frequencies Values . . . . . . . . .37Reading CTCSS/DPL Values . . . . . . . . 38Reading Auto-Scan Values . . . . . . . . . . 39Programming Frequencies, Codes and Auto-Scan . . . . . . . . . . . . . . . . . . . . 39Programming Mode FAQ. . . . . . . . . . . . 40Programming Values Example. . . . . . . . . . . 41Example of Programming a Frequency . 41Example of Programming a Code . . . . . 42Example of Programming Auto-Scan . . 43Other Programming Features . . . . . . . . . . . 44Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Editing Scan List . . . . . . . . . . . . . . . . . . 45Nuisance Channel Delete . . . . . . . . . . . 45CPS (Computer Programming Software). . . 46Bandwidth Select . . . . . . . . . . . . . . . . . . 47Time-Out Timer . . . . . . . . . . . . . . . . . . . 47Power Select . . . . . . . . . . . . . . . . . . . . . 47Battery Type Setting . . . . . . . . . . . . . . . 47Call Tones . . . . . . . . . . . . . . . . . . . . . . . 47Scramble . . . . . . . . . . . . . . . . . . . . . . . . 48Reverse Burst . . . . . . . . . . . . . . . . . . . . 48Cloning Radios. . . . . . . . . . . . . . . . . . . . . . . 49

CONTENTSEnglish 3Cloning with a Multi Unit Charger (MUC) . . . . . . . . . . . . . . . . . . . .49Cloning Radio using the Radio to Radio (R2R) Cloning Cable (Optional Accessory). . . . . . . . . . . . . . . .51Cloning using the CPS (Computer Programming Software) . . . . . . . . . . . . .53Troubleshooting . . . . . . . . . . . . . . . . . . . . .54Use and Care . . . . . . . . . . . . . . . . . . . . . . .58Frequency and Code Charts . . . . . . . . . . .59RMU2043 - UHF Default Frequencies Chart. . . . . . . . . . . . . . . . . . . . .59RMU2040 - UHF Default Frequencies Chart. . . . . . . . . . . . . . . . . . . . .60CTCSS and PL/DPL Codes . . . . . . . . . . . . .61Programming Customized Frequencies 66 Motorola Limited Warranty for the United States and Canada . . . . . . . . . .67Accessories . . . . . . . . . . . . . . . . . . . . . . . .71Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Audio Accessories . . . . . . . . . . . . . . . . . . . . 71Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Carry Accessories . . . . . . . . . . . . . . . . . . . . 72Power Supplies AC Pin Adaptors. . . . . . . . . 72Software Applications. . . . . . . . . . . . . . . . . . 72Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Power Supplies . . . . . . . . . . . . . . . . . . . . . . 73

English 4PRODUCT SAFETY AND RF EXPOSURE COMPLIANCEATTENTION!Models RMU2040 and RMU2043 are restricted to occupational use only to satisfy FCC RF energy exposure requirements. Model RMM2050 complies with general population and uncontrolled environment requirements. Before using this product, read the operating instructions and RF energy awareness information contained in the Product Safety and RF Exposure guide enclosed with your radio.!C a u t i o nNotice to Users (FCC and Industry Canada)This device complies with Part 15 of the FCC rules and RSS 210 of the Industry Canada rules per the conditions listed below:1.- This device may not cause harmful interference.2.- This device must accept any interference received including interference that may cause undesired operation.3.- Changes or modifications made to this device, not expressly approved by Motorola, could void the user's authority to operate this equipment.Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (orlesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

INTRODUCTIONEnglish 5INTRODUCTIONThank you for purchasing the Motorola® RM Series Radio. This radio is a product of Motorola's 80 plus years of experience as a world leader in the designing and manufacturing of communications equipment. The RM Series radios provide cost-effective communications for businesses such as retail stores, restaurants, schools, construction sites, manufacturing, property management , hospitality and more. Motorola professional two-way radios are the perfect communications solution for all of today's fast-paced industries. Note: Read this user guide carefully to ensure you know how to properly operate the radio before useBusiness Radios, Mailstop 1C15, Motorola8000 West Sunrise Boulevard Plantation, Florida 33322PACKAGE CONTENTS•Radio•Holster• Lithium-Ion Battery• Power Supply•Quick Reference Guide• Warranty Card• Drop-in Tray Charger• Product Safety & RF Exposure Booklet

INTRODUCTIONEnglish 6This User Guide can be downloaded from www.motorolasolutions.com/RMSeries. Product-related questions, contact:1-800-448-6686 (US and Canada)1-888-390-6456 on your TTY (Text Telephone)

FCC LICENSING INFORMATIONEnglish 9FCC LICENSING INFORMATIONINTERFERENCE INFORMATIONThis device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.RM Series Business two-way radios operate on radio frequencies that are regulated by the Federal Communications Commission (FCC). To transmit on these frequencies, you are required to have a license issued by the FCC. Application is made available on FCC Form 601 and Schedules D, H, and Remittance Form 159.To obtain these FCC forms, request document 000601 which includes all forms and instructions. If you wish to have the document faxed, mailed or have questions, use the following contact information.Faxed contact the Fax-On- Demand system at:Mailed call the FCC forms hotline at: Questions regarding FCC license contact the FCC at:1-202-418-0177 1-800-418-FORM1-800-418-3676 1-888-CALL-FCC1-888-225-5322Or: http://www.fcc.gov

FCC LICENSING INFORMATIONEnglish 10Before filling out your application, you must decide which frequency(ies) you can operate on. See “Frequencies and Code Charts”. For questions on determining the radio frequency, call Motorola Product Services at: 1-800-448-6686Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules.Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited.

CANADA LICENSING English 7CANADA LICENSING INFORMATIONGENERAL INFORMATIONThe operation of your Motorola radio is subject to the Radiocommunications Act and must comply with rules and regulations of the Federal Government’s department of Industry Canada. Industry Canada requires that all operators using Private Land Mobile frequencies obtain a radio license before operating their equipment.An application for your Industry Canada license is made on the form included with your radio. Additional forms and latest license application versions can be obtained from the nearest Industry Canada District office. A list of these offices is included for your information.THE LICENSE APPLICATIONGeneral Instructions1. Fill in the items as per the instructions. If you need additional space for any item use the reverse side of the application.2. Be sure to use a typewriter or print legibly.3. Make a copy for your files.4. Prepare a cheque or money order made out tothe “Receiver General for Canada”, for an amount, which is on the following schedule, for each radio purchased. (License is valid until April 1st of each year, and the renewed. 5. Mail your completed application, along with your cheque or money order to the closest IndustryCanada District office, according to the list on pagesTo obtain the latest Canadian License Application form, please go to:www.ic.gc.ca

BATTERIES AND CHARGERS SAFETY INFORMATIONEnglish 8BATTERIES AND CHARGERS SAFETY INFORMATIONThis document contains important safety and operating instructions. Read these instructions carefully and save them for future reference. Before using the battery charger, read all the instructions and cautionary markings on•The charger,•The battery, and •The radio using the battery.1. To reduce risk of injury, charge only the rechargeable Motorola-authorized batteries. Other batteries may explode, causing personal injury and damage. 2. Use of accessories not recommended by Motorola may result in risk of fire, electric shock, or injury. 3. To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger. 4. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in risk of fire and electric shock. If an extension cord must be used, make sure that the cord size is 18AWG for lengths up to 6.5 feet (2.0 m), and 16AWG for lengths up to 9.8 feet (3.0 m). 5. To reduce risk of fire, electric shock, or injury, donot operate the charger if it has been broken or damaged in any way. Take it to a qualified Motorola service representative. 6. Do not disassemble the charger; it is not repairable and replacement parts are not available. Disassembly of the charger may result in risk of electrical shock or fire. 7. To reduce risk of electric shock, unplug the charger from the AC outlet before attemptingany maintenance or cleaning

BATTERIES AND CHARGERS SAFETY INFORMATIONEnglish 9OPERATIONAL SAFETY GUIDELINES • Turn the radio OFF when charging battery. • The charger is not suitable for outdoor use. Use only in dry locations/conditions. • Connect charger only to an appropriately fused and wired supply of the correct voltage (as specified on the product). • Disconnect charger from line voltage by removingmain plug. • The outlet to which this equipment is connected should be nearby and easily accessible.• In equipment using fuses, replacements must comply with the type and rating specified in the equipment instructions. • Maximum ambient temperature around the power supply equipment must not exceed 40°C (104°F). • Power output from the power supply unit must not exceed the ratings stated on the product label located at the bottom of the charger. • Make sure that the cord is located where it will not be stepped on, tripped over, or subjected towater, damage, or stress.

RADIO OVERVIEWEnglish 10RADIO OVERVIEWPARTS OF THE RADIOPTT ButtonSB1-Monitor ButtonSB2- Down Button (Default)AntennaMicrophoneOn/Off/Volume knob LED IndicatorAccessory Connector Model Label Lithium-Ion battery

RADIO OVERVIEWEnglish 11On/Off/Volume KnobUsed to turn the radio ON or OFF and to adjust the radio’s volume.Accessory ConnectorUsed to connect compatible audio accessories. Model LabelIndicates the model of the radio.MicrophoneSpeak clearly into the microphone when sending a message.Antenna On all RM Series radios, the antenna is non-removable LED In dicatorUsed to give battery status, power-up status, radio call information and scan status.Side ButtonsPush-to-Talk (PTT) Button•Press and hold down this button to talk, release to listen itSide Button 1 (SB1)•The Side Button 1 is a general buttonthat can be configured by the ComputerProgramming Software - CPS. Thedefault setting of SB1 is ‘Monitor’.Side Button 2 (SB2)•The Side Button 2 is a general button that can be configured by the CPS. The SB2 default setting is set to scroll down until the desired channel is selected.RM Series provides a Li-Ion battery. For more information, see “Battery Feature on Pg.13.

RADIO OVERVIEWEnglish 12This User Guide covers multiple RM Series models, and may detail some features your radio does not have. The radio’s model is shown on the bottom of the radio and provides you the following information: Model Frequency BandTransmit Power (Watts)Number of Channels AntennaRMU2043 UHF 2Non-RemovableVHF- MURSRMM2050 245Non-RemovableNon-RemovableRMU2043 UHF 24

RADIO OVERVIEWEnglish 13BATTERY FEATURESAbout the Li-Ion BatteryThe RM Series radio comes equipped with a rechargeable Li-Ion battery. This battery should be charged before initial use to ensure optimum capacity and performance. Battery life is determined by several factors. Among the more critical are the regular overcharge of batteries and the average depth of discharge with each cycle. Typically, the greater the overcharge and the deeper the average discharge, the fewer cycles a battery will last. For example, a battery which is overcharged and discharged 100% several times a day, lasts fewer cycles than a battery that receives less of an overcharge and is discharged to 50% per day. Further, a battery which receives minimal overcharging and averages only 25% discharge, lasts even longer.Motorola batteries are designed specifically to be used with a Motorola charger and vice versa. Charging in non-Motorola equipment may lead to battery damage and void the battery warranty. The battery should be at about 77°F (25°C) (room temperature), whenever possible. Charging a cold battery (below 50° F [10°C]) may result in leakage of electrolyte and ultimately in failure of the battery. Charging a hot battery (above 95°F [35°C]) results in reduced discharge capacity, affecting the performance of the radio. Motorola rapid-rate battery chargers contain a temperature-sensing circuit to ensure that batteries are charged within the temperature limits stated above.

RADIO OVERVIEWEnglish 14Battery Recycling and DisposalLi-Ion rechargeable batteries can be recycled. However, recycling facilities may not be available in all areas. Under various U.S. state laws and the laws of several other countries, batteries must be recycled and cannot be disposed of in landfills or incinerators. Contact your local waste management agency for specific requirements and information in your area. Motorola fully endorses and encourages the recycling of Li-Ion batteries. In the U.S. and Canada, Motorola participates in the nationwide Rechargeable Battery Recycling Corporation (RBRC) program for Li-Ion battery collection and recycling. Many retailers and dealers participate in this program. For the location of the drop-off facility closest to you, access RBRC's Internet web site at:www.rbrc.com or call: 1-800-8-BATTERYThis internet site and telephone number also provides other useful information concerning recycling options for consumers, businesses and governmental agencies.

RADIO OVERVIEWEnglish 17Holster1. Slide the radio into the base of the holster and then press the radio against the back of the holster until the top clips are inserted in the top latches of the battery. 2. To remove, detach the top clips of the holster from the top latches of the battery and then slide the radio up from the holster pocket. Power Supply and Drop-in Tray ChargerThe radio is equipped with one Drop-in Tray Charger and one Power Supply with Adaptor. For details, see “Chargers” on page 72.

RADIO OVERVIEWEnglish 18Battery Life InformationWhen the Battery Save feature is ON (enabled by default) the battery life will be longer. The following chart summarizes battery life estimations:Note: Battery life is estimated based on 5% transmit/ 5% receive/ 90% standby standard duty cycle

RADIO OVERVIEWEnglish 20Charging the BatteryThe RM series radios offers two types of power supplies:•Standard Power Supply and,•Rapid Power Supply.Note: The radio comes equipped with a Standard Power Supply To charge the battery (with the radio attached), place it in a Motorola-approved Drop-in Tray Single Unit Charger or Drop-in Tray Multi Unit Charger.Note: When acquiring additional chargers or power supplies, make sure you have similar drop-in tray chargers and power supplies sets (all “rapid” or all “standard”). For part number details, refer to “Chargers” on page 72Charging with the Drop-in Tray Single Unit Charger (SUC)1. Place the drop-in tray charger on a flat surface.2. Insert the connector of the power supply into the port on the side of the drop-in tray charger.3. Plug the AC adaptor into a power outlet. 4. Insert the radio into the tray with the front of the radio facing the front of the charger, as shown. Note: When charging a battery attached to a radio, turn the radio OFF to ensure a full charge. See “Operational Safety Guidelines” on page 9 for more information

RADIO OVERVIEWEnglish 21To charge only the battery - at step 4, insert the battery into the tray, with the inside surface of the battery facing the front of the charger, as shown. Ensure the slots in the battery correctly engage in the charger

RADIO OVERVIEWEnglish 23Drop-in Tray Charger LED IndicatorsTable 1

RADIO OVERVIEWEnglish 25Estimated Charging TimeThe following table provides the estimated charging time of the battery. For further details, see “Battery” on page 71.

RADIO OVERVIEWEnglish 26Charging a Radio and Battery using a Multi Unit Charger- MUC (Optional Accessory)The Multi Unit Charger (MUC) allows drop-in charging of up to 6 radios or batteries. Batteries can be charged with the radios or removed and placed in the MUC separately. Each of the 6 charging pockets can hold a radio (with or without holster) or battery, but not both.1.Place the charger on a flat surface.2.Insert the power cord plug into the MUC’s jack.3. Plug the cord into an AC outlet.4. Turn the radio OFF.5. Insert the radio or battery into the charging pocket.Notes:•This Multi Unit Charger also allows you to clone up to 2 radios (2 Source radios and 2 Target radios). Refer to page 51 for details.• Further details on MUC’s operation are explained in the Instructions Sheet provided with the MUC. For part number details, refer to the Accessories section. Table 1

GETTING STARTEDEnglish 27GETTING STARTED SELECTING A CHANNEL To select a channel, press SB2 side button until you reach the desired channel. Voice announcement will indicate the channel selected. Each channel has its own Frequency, Interference Eliminator Code and Scan Settings.TALKING AND MONITORING It is important to monitor for traffic before transmitting to avoid ‘talking over’ someone who is already transmitting.To monitor, long press and hold the SB1(*) button to access channel traffic. If no activity is present, you will hear ‘static’. To release, press SB1 again. Once channel traffic has cleared, proceed with your call by pressing the PTT button. When transmitting, the LED Indicator will be On solid red during transmission. 2 channels are active with factory default setting. Refer to "Advanced Radio Configuration" on Page 34 to active more channels. The radio can operate up to 4 channels (UHF models) or up to 5 channels (MURS models).For the following explanations, refer to “Parts of the Radio” on page 8.TURNING RADIO ON/OFFTo turn the radio ON, rotate the ON/OFF/Volume Knob clockwise. The radio will play either one of the following options:•Power up tone and channel number announcement•Battery level and channel numberannouncement•SilentThe LED blinks red briefly.To turn the radio OFF, rotate the On/Off/Volume Knob counterclockwise until you hear a ‘click’ and the radio LED Indicator turns OFF.ADJUSTING VOLUME Turn the On/Off/Volume Knob clockwise to increase the volume, or counterclockwise to decrease the volume.Note: Do not hold the radio too close to the ear when the volume is high or when adjusting the volume.

GETTING STARTEDEnglish 28Notes:• To listen to all activity on a current channel, short press the SB1 to set the CTCSS/DPL code to 0. This feature is called ‘CTCSS/DPL Defeat (Squelch set to SILENT)’.• (*) This assumes SB1 is not being programmed for a different mode. RECEIVING A CALLTo select a channel, press SB2 side button until you reach the desired channel, Voice announcement will indicate the channel selected1.Make sure the PTT button is released and listen for voice activity.2.The LED Indicator will be solid red while the radio is receiving a call.3.To respond, hold the radio vertically 1 to 2 inches (2.5 to 5cm) from mouth. Press the PTT button to talk; release it to listen.TALK RANGE

GETTING STARTEDEnglish 30RADIO LED INDICATORS

GETTING STARTEDEnglish 31HANDS-FREE USE/VOXMotorola RM Series radios can operate hands-free (VOX) when used with compatible VOX accessories. With Compatible VOX AccessoriesThe default factory setting for VOX sensitivity level is OFF. Before using VOX, set VOX level to a setting different from ‘OFF’ via the CPS (Customer Programming Software). Then, perform the following steps:1. Turn the radio OFF.2. Open accessory cover.3. Insert the audio accessory’s plug firmly intoaccessory port.4. Turn radio ON. The LED Indicator willblink double red.5. Lower radio volume BEFORE placing accessory near ear.6. To transmit, speak into accessory microphone and to receive, stop talking.Note: To order accessories, refer to: www.motorolasolutions.com/RMseries or call 1 (800) 448-6686, or contact your Motorola point of purchaseVOX AccessoryAccessory Port/Connector

GETTING STARTEDEnglish 32Setting VOX SensitivityThe sensitivity of the radio's accessory or microphone can be adjusted to suit different operating environments. VOX sensitivity can be programmed via the CPS. Default value is OFF. If you want to use the VOX feature, VOX level should be set at a value different from OFF.•1 = High audio input levels will trigger the Tx• 2 = Medium sensitivity•3 = Low audio input levels will trigger the TxMicrophone GainThe sensitivity of the microphone can be adjusted to fit different users or operating environments.This feature can be adjusted only through the CPS. Microphone default setting is set to 2 = Medium Gain.Hands Free without Accessories (iVOX)•Enable iVOX by pressing the PTTbutton while turning the radio ON.•iVOX operation can be temporarilydisabled by pressing the PTT button.Note•There is a short delay between when youstart talking and when the radio transmits.

GETTING STARTEDEnglish 33Toggle Voice Prompt in User ModeShort press the SB1 button while turning ON the radio to enable/disable Voice Prompt in User mode. By default is ON.Power Up - Tone Mode Toggle power up mode, To enable/disable press SB1 and SB2 buttons simultaneously for 2 or 3 seconds while powering up the radio until you hear a quick series of beeps and a voice announcement. Reset to Factory DefaultsReset to Factory Defaults will set back all radio features to the original factory default settings. To do so, press PTT, SB2 and SB1 simultaneously while turning ON the radio until you hear a high tone chirp.

PROGRAMMING FEATURESEnglish 34PROGRAMMING FEATURESTo easily program all the features in your radio, it is recommended to use the Customer Programming Software (CPS) and programming cable.CPS software download is available for free at www.motorolasolutions.com/RMseriesAdvanced ConfigurationAdvanced Configuration is a configuration mode that allows the customization of additional features via the front panel.When the radio is set to Advanced Configuration, you are able to read and modify four features: •Frequency Selection•CTCSS/DPL Codes•Auto-Scan. The Frequency Select feature allows you to choose frequencies from a pre-defined list. The Interference Eliminator Code (CTCSS/DPL) helps minimize interference by providing you with a choice of code combinations that filter out static, noise, and unwanted messages. The Auto-Scan feature allows you to set a particular channel to automatically enable Scan each time you switch to that channel.The non-display models don't have a display to show programmed values, then navigation is guided via voice prompt. •Active ChannelsThe Active Channels feature allows you to increase or decrease the amount of channels active (In the range of maximum channels).

PROGRAMMING FEATURESEnglish 37Entering Advanced Configuration ModeNote: Before programming the features, make sure your radio is set to the channel youwish to program. You can do so before entering Advanced Configuration Mode or at any time during the Advanced Configuration Mode by pressing SB2 until reaching the desired channel.To read or modify Frequencies, Codes, Auto-Scan or Active Channels, set the radio to 'Advanced Configuration Mode' by pressing and holding the PTT and SB1 buttons simultaneously for 3 to 5 seconds while powering up the radio and until you hear a voice prompt saying "Programming Mode" and "Channel #".Note: 'Idle' Programming Mode is the stage of the Programming Mode in which the radio is waiting for the user to start the radio programming cycle.Once you are in the 'Idle' Programming Mode, you will be able to hear the Frequencies, Codes, Auto-Scan and active channels settings by short pressing the PTT button tomove along the different programmable features.Entering Frequencies ValuesRM Series radios have 89 frequencies for UHF in US and for Canada UHF, there are only 2 frequencies.Once in ‘Idle’ Programming Mode, the first value available to change is Channel number, you can change the channel by pressing SB2 button until you reach desired Channel, voice announcement will indicate channel selected. Using SB1 and SB2 you can change values. The value selected is announced by voice prompt.

PROGRAMMING FEATURESEnglish 38Reading CTCSS/DPL ValuesIf you continue short pressing the PTT button the radio will move forward to programming CTCSS/PL Codes. After hearing the current value for CTCSS/PL Code you can scroll to a new code value using the SB1 or SB2 button. RM Series have up to 219 codes available (refer to “Frequencies and Codes Charts” Section).Reading Auto-Scan Values After hearing the CTCSS/DPL codes, short press the PTT button and the radio will advance to programming Auto-Scan.Auto-Scan only has two values: - Enabled- Disabled Note: While in Auto-Scan Mode, if you short press PTT button, the radio will move forward to programming the "Active Channels" feature, so you can modify the amount of channels available for your unit using the SB1 or SB2 button.Saving SettingsIf you are satisfied with the setting, you can either:•short press PTT to continueprogramming.•long press PTT to save and return to'Idle' Programming Mode, or return tonormal radio operation if the radio isalready in idle mode or•long press the PTT button twice to exit'Idle' Programming Mode and return tothe normal radio operation.Note:•If you do not wish to save the value you just programmed, turn the radio OFF.•If you ‘roll-over’ to the beginning of ‘Idle’ Programming Mode you will hear "Channel #" and the LED Indicator will be a green heartbeat again. All values that were changed will be automatically saved.•If long PTT press or radio return to "Idle" Programming mode, radio will save the changes.

PROGRAMMING FEATURESEnglish 40Programming Mode FAQ1. I got distracted while programming andforgot which feature I wasprogramming. What should I do?Return to 'Idle' Programming Mode and start over. • Long press the PTT button. The radio will return to the 'Idle' Programming Mode or,• Turn OFF the radio and enter Programming Mode again (see instructions in the beginning of this section)2. I am trying to program a frequency (orcode) value but the radio would not do it.It rolled over and took me back to value‘0’.The radio will not allow you to program any values that are not available in the frequencies and codes pool. For example, if you try to program code 220, the radio would not accept it, as the maximum value allowed is 219. Same thing will happen with frequencies. Check the Frequencies and Codes Charts section to make sure you are programming a valid number.3. I am trying to enter the ProgrammingMode but the radio would not do it.The radio might be locked using the CPS to not allow Front Panel Programming. To re-enable, use the CPS.

PROGRAMMING FEATURESEnglish 414. When I was programming I made amistake and programmed the wrongvalue. How can I erase it or re-programit?If you make a mistake while programming a value you have two choices: •The radio settings will roll-over each time they reach a maximum or minimum value. Keep increasing (short press SB1) or decreasing (short pressing SB2) until you get the desired value or,•Turn OFF the radio and start-over.5. I just programmed the value I wanted.How do I exit Programming Mode?• If you are in Programming Mode you can exit by long pressing the PTT button twice.• If you are already in the ‘Idle’ Programming Mode, long press the PTT button once.6. I am done programming the features inthis channel and want to program another channel.PROGRAMMING VALUES EXAMPLEExample of Programming a Frequency Assuming current frequency value is set to Channel 1, with the UHF default frequency ‘02’ (equivalent to 464.5500 MHz), and you want to change it to Frequency Number = ‘13’ (which is mapped to 461.1375 MHz), follow this sequence:• Enter Programming ModePress short PTT several times until you hear "Channel #", then switch channel using SB2 button. If you wish to save the changes, make sure you are in the ‘Idle’ Programming Mode before switching the channel as otherwise you will lose the changes made.

PROGRAMMING FEATURESEnglish 42•Short press the PTT button to enter Frequency Programming Selection Mode. Radio will announce current value ‘2’•Press SB1 button eleven times to scroll up the frequency list and you will hear frequency "13"Long press the PTT button to exit Programming Mode or turn radio OFF.Example of Programming a Code Assuming current code value is set to factory default ‘001’, and you want to change it to CTCSS/DPL Code = 103 follow the sequence below:•Enter into Advanced Configuration Mode•Short press the PTT button twice and you will hear "Code #" (Entering CTCSS/DPL Programming Selection Mode). •Press and hold SB1 or SB2 will cause the radio to increment by 10's - 10, 20, 30 ... 100, 110.Will not hear 103. Need to release SB1 or SB2, then slowly press/release SB1 or SB2 until the user reaches the desired code, in this case "103"Long press the PTT button. LED Indicator will show a green heartbeat to indicate 'Programming'/'Idle' state. Long press the PTT button to exit Programming Mode or turn radio OFF.••••Long press the PTT button. LED Indicator will show a heartbeat to indicate 'Idle' state.

PROGRAMMING FEATURESEnglish 43•Example of Programming Auto-ScanAuto-Scan is the third Programming Mode and can be set to either ON or OFF on a particular channel. To set Auto-Scan to ON:•Enter into advanced Configuration Mode and select the desired channel.•Short press the PTT button three times to enter Auto-Scan Programming Selection Mode. The radio will announce "Auto-Scan" and currentsetting (Enabled or Disabled).•To change, press side button 1 or 2.Example of Programming Active ChannelsActive Channels is the last Programming Mode and It allows you to modify the number of active channels the radio will be programmed to support.To set Active Channels:Enter Programming Mode and select the desired channel Short press the PTT button Four times to enter Active Channels Programming Selection Mode. The radio will announce "Active Channels" and current value.To change, press side button 1 or 2.••Long press the PTT button. LED Indicator will show a green heartbeat to indicate Programming/Idle” state.•Long press the PTT button to exit Programming Mode or turn radio OFF.•Long press the PTT button. LED Indicator will show a green heartbeat to indicate “Idle” state.•Long press the PTT button to exit Programming Mode or turn radio OFF.••

PROGRAMMING FEATURESEnglish 44OTHER PROGRAMMING FEATURESScanScan allows you to monitor other channels to detect conversations. When the radio detects a transmission, it will stop scanning and will receive on the active channel. This will allow you to listen and talk to people on that channel without having to change channel. If there are transmissions on another channel once the radio has stopped scanning then you will not hear that activity. After activity has ceased on the channel which the radio has stopped, scanning will resume again after 5 seconds of no activity on that channel.•By pressing the PTT button while the radio is scanning, the radio will transmit on the channel which was selected before Scan was activated. If no transmission occurs within five seconds, scanning will resume.•If you want to scan a channel without Interference Eliminator Codes (CTCSS/DPL), set the code settings for the channels to ‘0’ in the CTCSS/DPL Programming Selection Mode.Whenever the radio is set up in Scan, the LED Indicator will signal a Red heartbeat.•To start scanning, press the SBx (x=1 or 2) button (Scan has to be programmed to either SB1 or SB2 via CPS). SB2 default to Down Button for RMU2040/RMU2043/RMM2050 models.•To stop scanning, short press the SBxbutton again.

PROGRAMMING FEATURESEnglish 45Editing Scan ListScan Lists can be edited by using the CPS (refer to CPS section on page 46) Nuisance Channel DeleteNuisance Channel Delete allows you to temporarily remove channels from the Scan List. This feature is useful when frequent, irrelevant conversations on a channel tie up the scanning feature, becoming a nuisance to the user.To delete a channel from the Scan List:• To start scanning, press the SBx (x=1or x=2) button (Scan has to beprogrammed to either SB1 or SB2 viaCPS). SB2 by default programmed toDown Channel.•Wait until the radio stops on thechannel you wish to eliminate, thenlong press the SBx button to delete it.(Cannot delete home channel - thechannel that the user enables scan on).•The channel will not be scannedagain until you exit Scan by shortpressing the SBx button again or byturning the radio OFF and back ON.

PROGRAMMING FEATURESEnglish 47Bandwidth Select (Only Canada models) All US models are compliants with the narrowbandwith FCC regulation.Default setting for Bandwidth Select depends on the specific frequency and channel. Some frequencies have selectable channel spacing, which must match with other radios for optimum audio quality. For details, refer to Frequency and Code Charts section.Time-Out TimerThis timer sets the amount of time that the radio can continuously transmit before transmission is automatically terminated. The default setting is 60 seconds and can be changed using the CPS.Power SelectPower Select allows you to select between high and low transmission power per channel. The power levels for RM Series toggle between 2W and 1W.Call TonesCall Tones feature allows you to transmit an audible tone to other radios on the same channel and alerting them that you are about to talk or alerting themwithout speaking. The call tones feature must be programmed to SB1 or SB2 and 1 of 3 pre-recorded tones selectedScramble The Scramble feature makes transmissions sound garbled to anyone listening without the same code. Scramble default value is OFF. The Scramble feature should be programmed to SB1 or SB2, If the scramble code need to be changed during radio's normal operation.Reverse Burst Reverse Burst eliminates unwanted noise (squelch tail) during loss of carrier detection. You can select values of either 180 or 240 to be compatible with other radios. Default 180. Notes: The features described are just some of the features CPS has. There are many more capabilities that this software offers. For more information refer to the HELP file in the CPS.

PROGRAMMING FEATURESEnglish 51CPS and Cloning Cables (Optionals)•CPS CableBoth CPS and Cloning cables are made to work either with RM Series radios or RDX series. Cloning cable also can work with a mix of RDX and RM radios.The CPS cable is made to program RM series radio when the switch is in either "Flash" or "CPS" position. If you want to use the CPS cable to program a RDX radio, make sure the switch is in "CPS" position and attach a USB converter provided as part of the CPS cable kit.•Cloning cable allows you to clone:- RM Series, make sure the switch is in "Cloning" position.- RDX radios, make sure the switch is in either "Cloning" or "Legacy" position there is one USB converter attached on each end.- RM and RDX radios, make sure the switch is in "Legacy" position and use a USB converter to connect to the RDX SUC. Cloning cable kit provides 1 USB converter.•Cloning CableMicro-to-Mini USB ConvertorUSB Converter

PROGRAMMING FEATURESEnglish 51Cloning Radio using the Radio to Radio (R2R) Cloning Cable (Optional Accessory)Operating Instructions1. Before beginning the cloning process, make sure you have:•A fully charged battery on each oneof the radios.•Two Single Unit Chargers (SUC).Either 2 SUC for RM Series or 1 SUC for RM Series and 1 SUC for RDX Series•Turn OFF the radios and,2. Unplug any cables (power supply or USB cables) from the SUCs.3. Plug one side of the cloning cable mini connector to one SUC. Plug the other end to the second SUC.Note: During the cloning process no power is being applied to the SUC. The batteries will not be charged. A data communication is being established between the two radios.4. Turn ON the Target radio and place it into one of the SUCs.5. On the Source radio, power the radio following the sequence below:•Long press the PTT button and SB2 simultaneously while turning the radio ON.• Wait for 3 seconds before releasing thebuttons until you hear a distinctive audible tone and the word "Cloning" 6. Place the Source radio in its SUC, press and release SB1. buttons until you hear a distinctive audible tone and the word "Cloning"

PROGRAMMING FEATURESEnglish 527. After cloning is completed, the Source radio will announce either ‘Successful’ (cloning was successful) or ‘failed’ (cloning process has failed).8. Once you have completed the cloning process, turn the radios OFF and ON to exit ‘clone’ mode. What To Do if Cloning FailsThe radio will emit "Fail" indicating that the cloning process has failed. In the event that cloning fails, try performing each of the following before trying to start the cloning process again:1. Ensure that the batteries on both radios are fully charged.2. Check the cloning cable connection on bothSUCs.3. Ensure that the battery is engaged properly on to the radio.4. Ensure that there is no debris in the charging tray or on the radio contacts.5.Ensure that the Source radio is in cloning mode.6.Ensure that the Target radio is turned ON.7. Ensure that radios are both from the same frequency band, same region and same transmission power.Note: This cloning cable is designed to operate only with compatible Motorola SUC RLN6175 and PMLN6394AWhen ordering Cloning Cable please refer to P/N HKKN4028A. For details about accessories refer to Accessories section.

PROGRAMMING FEATURESEnglish 53Cloning using the CPS (Computer Programming Software)When cloning using this method, you will need to have the CPS software, a Drop-in Tray Charger and the CPS Programming Cable. To order the CPS Programming Cable, please refer to HKKN4027AInformation on how to clone using the CPS is available either in: • the CPS Help File --> Content and Index --> Cloning Radios, or •in the CPS Programming Cable Accessory Leaflet.

TROUBLESHOOTINGEnglish 54TROUBLESHOOTINGSymptom No PowerTry This... Recharge Replace the battery. Extreme operating temperatures may affect battery life. Refer to See “About the Li-Ion Battery” on page 14.Hearing other noises or conversation on a channelConfirm Interference Eliminator Code is set. Frequency or Interference Eliminator Code may be in use. Change settings: either change frequencies or codes on all radios. Make sure radio is at the right frequency and code when transmitting. Refer to “Talking and Monitoring” on page 24.Message Scrambled Scramble Code might be ON, and/or setting does not match the other radios' settings. Audio quality not good enough Radio settings might not be matching up correctly. Double check frequency codes to make sure they are identical in all radios

TROUBLESHOOTINGEnglish 55Limited talk rangeTry This... Check for clear line of sight to improve transmission. Wearing radio close to body such as in a pocket or on a belt decreases range. Change location of radio. To increase range and coverage, you can reduce obstructions, increase power. UHF radios provides greater coverage in industrial and commercial buildings. Increasing power provides greater signal range and increased penetration through obstructions.Refer to See “Talking and Monitoring” on page 24.Message not transmitted or receivedMake sure the PTT button is completely pressed when transmitting. Confirm that the radios have the same Channel, Frequency, Interference Eliminator Code and Scramble Code settings. Refer to “Talking and Monitoring” section on page 24 for further information. Recharge, replace and/or reposition batteries. Refer to “About your Li-Ion Battery” section on page 11.Obstructions and operating indoors, or in vehicles, may interfere. Change location. Refer to “Talking and Monitoring” Section on page 24.Verify that the radio is not in Scan. Refer to “Scan” on page 41 and “Nuisance Channel Delete” on page 41.Symptom

TROUBLESHOOTINGEnglish 56Heavy static or interferenceRadios are too close; they must be at least five feet apart. Radios are too far apart or obstacles are interfering with transmission. Refer to “Talking and Monitoring” on page 24.Low batteriesRecharge or replace Li-Ion battery. Extreme operating temperatures affect battery life. Refer to “About the Li-Ion Battery” on page 11.Drop-in Charger LED light does not blink Refer to “Charging the Battery” section on page 21, “Drop-in Tray Charger LED Indicators” section on page 24 and “Installing the Lithium-Ion Battery” section on page 13.Low battery indicator is blinking although new batteries are insertedRefer to “Installing the Li-Ion Battery” section on page 13 and “About your Li-Ion Battery” section on page 11.Symptom Try This...

USE AND CAREEnglish 58Use a soft damp clothto clean the exteriorDo not immersein waterDo not use alcohol orcleaning solutionsTurn radio OFF andremove batteriesDry with soft cloth Do not use radio untilcompletely dryIf the radio is submerged in water...USE AND CARE

FREQUENCY AND CODE English 59FREQUENCY AND CODE CHARTS RMU2043 - UHF DEFAULT FREQUENCIES CHARTRM UHF 4CH Radios Default Frequencies - RMU2043Channel Frequency # Frequency (MHz) Code # Code Bandwidth1 1 458.6625 1 67.0 Hz 12.5 kHz2 2 469.2625 167.0 Hz 12.5 kHz

FREQUENCY AND CODE English 60RMU2040 - UHF DEFAULT FREQUENCIES CHART RM UHF 4 CH Radios Default Frequencies - RMU2040

FREQUENCY AND CODE EnglishRMM2050 - MURS DEFAULT FREQUENCIES CHART

FREQUENCY AND CODE English 61CTCSS AND PL/DPL CODESCTCSS CodesCTCSS Hz CTCSS Hz CTCSS Hz1 67.0 14 107.2 27 167.9271.9 15 110.9 28 173.83 74.4 16 114.8 29 179.9477.0 17 118.8 30 186.25 79.7 18 123 31 192.8682.5 19 127.3 32 203.57 85.4 20 131.8 33 210.7888.5 21 136.5 34 218.19 91.5 22 141.3 35 225.710 94.8 23 146.2 36 233.611 97.4 24 151.4 37 241.812 100.0 25 156.7 38 250.313 103.5 26 162.2 122 (*) 69.3Note: (*) New CTCSS code.

FREQUENCY AND CODE English 62PL/DPL CodesDPL Code DPL Code DPL Code39 23 55 116 71 24340 25 56 125 72 24441 26 57 131 73 24542 31 58 132 74 25143 32 59 134 75 26144 43 60 143 76 26345 47 61 152 77 26546 51 62 155 78 27147 54 63 156 79 30648 65 64 162 80 31149 71 65 165 81 31550 72 66 172 82 33151 73 67 174 83 34352 74 68 205 84 34653 114 69 223 85 35154 115 70 226 86 364

FREQUENCY AND CODE English 6387 365 104 565 121 75488 371 105 606 123 64589 411 106 612 124 Customized PL90 412 107 624 125 Customized PL91 413 108 627 126 Customized PL92 423 109 631 127 Customized PL93 431 110 632 128 Customized PL94 432 111 654 129 Customized PL95 445 112 662 130 Inverted DPL 3996 464 113 664 131 Inverted DPL 4097 465 114 703 132 Inverted DPL 4198 466 115 712 133 Inverted DPL 4299 503 116 723 134 Inverted DPL 43100 506 117 731 135 Inverted DPL 44101 516 118 732 136 Inverted DPL 45102 532 119 734 137 Inverted DPL 46103 546 120 743 138 Inverted DPL 47PL/DPL Codes (Continued) DPL Code DPL Code DPL Code

FREQUENCY AND CODE English 64139 Inverted DPL 48 156 Inverted DPL 65 173 Inverted DPL 82140 Inverted DPL 49 157 Inverted DPL 66 174 Inverted DPL 83141 Inverted DPL 50 158 Inverted DPL 67 175 Inverted DPL 84142 Inverted DPL 51 159 Inverted DPL 68 176 Inverted DPL 85143 Inverted DPL 52 160 Inverted DPL 69 177 Inverted DPL 86144 Inverted DPL 53 161 Inverted DPL 70 178 Inverted DPL 87145 Inverted DPL 54 162 Inverted DPL 71 179 Inverted DPL 88146 Inverted DPL 55 163 Inverted DPL 72 180 Inverted DPL 89147 Inverted DPL 56 164 Inverted DPL 73 181 Inverted DPL 90148 Inverted DPL 57 165 Inverted DPL 74 182 Inverted DPL 91149 Inverted DPL 58 166 Inverted DPL 75 183 Inverted DPL 92150 Inverted DPL 59 167 Inverted DPL 76 184 Inverted DPL 93151 Inverted DPL 60 168 Inverted DPL 77 185 Inverted DPL 94152 Inverted DPL 61 169 Inverted DPL 78 186 Inverted DPL 95153 Inverted DPL 62 170 Inverted DPL 79 187 Inverted DPL 96154 Inverted DPL 63 171 Inverted DPL 80 188 Inverted DPL 97155 Inverted DPL 64 172 Inverted DPL 81 189 Inverted DPL 98PL/DPL Codes (Continued) DPL Code DPL Code DPL Code

FREQUENCY AND CODE English 65190 Inverted DPL 99 200 Inverted DPL 109 210 Inverted DPL 119191 Inverted DPL 100 201 Inverted DPL 110 211 Inverted DPL 120192 Inverted DPL 101 202 Inverted DPL 111 212 Inverted DPL 121193 Inverted DPL 102 203 Inverted DPL 112 213 Inverted DPL 123194 Inverted DPL 103 204 Inverted DPL 113 214 Customized DPL195 Inverted DPL 104 205 Inverted DPL 114 215 Customized DPL196 Inverted DPL 105 206 Inverted DPL 115 216 Customized DPL197 Inverted DPL 106 207 Inverted DPL 116 217 Customized DPL198 Inverted DPL 107 208 Inverted DPL 117 218 Customized DPL199 Inverted DPL 108 209 Inverted DPL 118 219 Customized DPLPL/DPL Codes (Continued) DPL Code DPL Code DPL Code

WARRANTYEnglish 67MOTOROLA LIMITED WARRANTY FOR THE UNITED STATES AND CANADAWhat Does this Warranty Cover?Subject to the exclusions contained below, Motorola, Inc. warrants its telephones, pagers, and consumer and business two-way radios (excluding commercial, government or industrial radios) that operate via Family Radio Service or General Mobile Radio Service, Motorola-branded or certified accessories sold for use with these Products (“Accessories”) and Motorola software contained on CD-ROMs or other tangible media and sold for use with these Products (“Software”) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Motorola Products, Accessories and Software purchased by consumers in the United States, which are accompanied by this written warranty.Products and Accessories Products Covered Length of CoverageProducts and Accessories as defined above, unless otherwise provided for below.One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.Decorative Accessories and Cases.Decorative covers, bezels, PhoneWrap™ covers and cases.Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product.Business Two-way Radio AccessoriesOne (1) year from the date of purchase by the first consumer purchaser of the product.Products and Accessories that are Repaired or Replaced.The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer.

WARRANTYEnglish 68ExclusionsNormal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty.Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage. Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage.Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage.Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, or parts, are excluded form coverage.

WARRANTYEnglish 69Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products Accessories or Software is excluded from coverage.Software ExclusionsSoftware Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected.Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided “as is” and without warranty.WHO IS COVERED?This warranty extends only to the first consumer purchaser, and is not transferable.HOW TO OBTAIN WARRANTY SERVICE OR OTHER INFORMATION?Contact your Motorola point of purchase.SOFTWARE COPYRIGHT NOTICEThe Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law.Products Covered Length of CoverageSoftware. Applies only to physical defects in the media that embodies the copy of the software (e.g. CD-ROM, or floppy disk).Ninety (90) days from the date of purchase.

WARRANTYEnglish 70Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.PATENT NOTICEThis product is covered by one or more of the following United States patents.5896277 5894292 5864752 5699006 5742484 D408396 D399821 D387758 D389158 5894592 5893027 5789098 5734975 5861850 D395882 D383745 D389827 D389139 5929825 5926514 5953640 6071640 D413022 D416252 D416893 D433001EXPORT LAW ASSURANCESThis product is controlled under the export regulations of the United States of America. The Governments of the United States of America may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce.

ACCESSORIESEnglish 71ACCESSORIES AUDIO ACCESSORIES BATTERYPart No.53815HMN9026ERHKLN4477B DescriptionHeadset w/Boom Mic BRRemote Speaker Mic BRSurveillance Earpiece BR538655386656517RLN6423BDescriptionHeadset w/Swivel Boom MicEarbud w/Clip PTT Mic BREarpiece w/Inline MicSwivel Earpiece BRPart No.

ACCESSORIESEnglish 72CARRY ACCESSORIESCABLESCHARGERSDescriptionPart No.HKKN4028AHKKN4027ADescriptionRadio to Radio Cloning Cable CPS Programming Cable Part No. DescriptionPMLN6384APMLN6394AMulti Unit Charger (MUC) Kit - North America Standard Drop-in Tray ChargerPart No.HKLN4510A Swivel Holster