Motorola Solutions 89FT4826 Portable Radio User Manual WarisPopUser
Motorola Solutions, Inc. Portable Radio WarisPopUser
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2846 |
| Application ID | v0nAMeetL/eOSLWaxsxwUg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 252.78kB (3159749 bits) |
| Date Submitted | 1998-06-11 00:00:00 |
| Date Available | 1998-08-10 00:00:00 |
| Creation Date | 1998-05-27 14:09:07 |
| Producing Software | Acrobat Distiller 3.0 for Power Macintosh |
| Document Lastmod | 1998-06-11 16:45:10 |
| Document Title | #WarisPopUser.book |
| Document Creator | FrameMaker5: AdobePS 8.5.1 |
| Document Author: | ramesh |
Motorola Inc. FCC ID: AZ489FT4826 GP328 Professional Two-Way Radio EXHIBIT 12 #WarisPopUser.book Page 1 27, May 1998, 2:06 PM 2-YEAR LIMITED WARRANTY FOR RADIOS We thank you for purchasing our Motorola radios. These radios are manufactured according to the highest quality standards set and are backed by Motorola’s two (2) year warranty. The rechargeable Motorola supplied batteries have a one (1) year warranty. Kindly approach your dealer for more information. Motorola warrants its radios and batteries against defects in material and workmanship under normal use and service for the period stated above. Motorola recommends that you use Motorola supplied accessories and batteries in connection with the radio. We would also advise you against attempting any modifications or repairs or any other form of unauthorised service to your radio. Should you have any queries, please contact: Singapore - Telephone/Fax: (65) 3810408&9/2871068 Beijing - Telephone/Fax: (86-10) 68437222/68438195 Please see next page for more information. Fill in the details of your radio below for your own reference: Model Name/No.: Serial Number: Date of Purchase: Dealer Name: Address: Telephone: English #WarisPopUser.book Page 2 27, May 1998, 2:06 PM LIMITED WARRANTY MOTOROLA RADIO PRODUCTS Limited Warranty This express limited warranty covers the Product manufactured by MOTOROLA Radio Products Group and applies to any warranty already mentioned. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless specifically made in writing and signed by an authorised officer of MOTOROLA. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty. This warranty sets forth the full extent of MOTOROLA’S responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLA’S option, is the sole and exclusive remedy of purchaser/user of the Product. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXCLUDED. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. Notwithstanding anything contained herein, MOTOROLA shall not be liable for any of the following situations: A) Defects or damage resulting from use of the Product in other than its normal and customary manner. B) Defects or damage from misuse, accident, water, liquid or neglect. C) Defects or damage from improper or unauthorised testing, operation, maintenance, service, repair, installation, alteration, modification, or adjustment. D) Product which has had the serial number removed or made illegible. E) A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with Motorola’s published specifications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from Motorola. F) Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. MOTOROLA shall have no liability whatsoever with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability whatsoever for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. HOW TO GET WARRANTY SERVICE: Provide proof of purchase and deliver or send the Product item, transportation and insurance prepaid to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized warranty service locations. If you contact the company that sold you the Product, it can facilitate your obtaining warranty service. You can also call Motorola for assistance: 65-3810408/9 (Singapore) or 86-10-68437222 (Beijing). English #WarisPopUser.book Page 1 27, May 1998, 2:06 PM Contents CONTENTS Sending a Call. . . . . . . . . . . . . . . . . . . . . . . . . . 13 Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . 13 Parts of the Radio. . . . . . . . . . . . . . . . . . . . . . . . On/Off/Volume Knob . . . . . . . . . . . . . . . . . Channel Selector Knob. . . . . . . . . . . . . . . . . Programmable Buttons. . . . . . . . . . . . . . . . . Push-to-Talk (PTT) Button . . . . . . . . . . . . . Microphone . . . . . . . . . . . . . . . . . . . . . . . . . Keypad Keys (for keypad radios only) . . . . Programmable Buttons Audio Indicators. . . Getting Started . . . . . . . . . . . . . . . . . . . . . 9 Battery Information . . . . . . . . . . . . . . . . . . . . . . 9 Battery Status . . . . . . . . . . . . . . . . . . . . . . . . 9 Charging your Battery . . . . . . . . . . . . . . . . . 9 Accessory Information. . . . . . . . . . . . . . . . . . . 10 Attaching the Battery . . . . . . . . . . . . . . . . . 10 Removing the Battery . . . . . . . . . . . . . . . . 10 Attaching the Antenna . . . . . . . . . . . . . . . . 11 Removing the Antenna. . . . . . . . . . . . . . . . 11 Attaching the Belt Clip. . . . . . . . . . . . . . . . 11 Removing the Belt Clip . . . . . . . . . . . . . . . 12 Turning the Radio On or Off . . . . . . . . . . . . . . 12 Adjusting the Radio’s Volume. . . . . . . . . . . . . 12 Selecting a Radio Channel . . . . . . . . . . . . . . . . 13 Radio Call Information . . . . . . . . . . . . . .15 Talkaround . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Squelch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Power Level . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 CONTENTS Radio Overview . . . . . . . . . . . . . . . . . . . . 3 Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Starting or Stopping a Scan Operation . . . . . . . 17 Talkback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Deleting a Nuisance Channel . . . . . . . . . . . . . . 17 Adding a Deleted Nuisance Channel back to the Scan List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Scan Channel Discovery Alert . . . . . . . . . . . . . 18 Scan List Member Priority . . . . . . . . . . . . . . . . 18 Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Making a Phone Call . . . . . . . . . . . . . . . . . . . . 19 Entering the Phone Mode . . . . . . . . . . . . . . 19 Sending the Access Code . . . . . . . . . . . . . . 19 Sending the Phone Number . . . . . . . . . . . . 20 The Phone Conversation . . . . . . . . . . . . . . . 22 Ending the Phone Call . . . . . . . . . . . . . . . . 22 English #WarisPopUser.book Page 2 27, May 1998, 2:06 PM Contents CONTENTS Safety Information . . . . . . . . . . . . . . . . . 23 Safe And Efficient Operation Of Motorola TwoWay Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Exposure To Radio Frequency Energy . . . 23 Portable Radio Operation And EME Exposure . . . . . . . . . . . . . . . . . . 24 Electromagnetic Interference/Compatibility . . . . . . . . . . . . . 24 Operational Warnings . . . . . . . . . . . . . . . . 25 Operational Cautions . . . . . . . . . . . . . . . . . 25 English #WarisPopUser.book Page 3 27, May 1998, 2:06 PM Radio Overview RADIO OVERVIEW PARTS OF THE RADIO Side Button 1 (programmable) Push-to-Talk (PTT) Button Side Button 2 (programmable) Side Button 3 (programmable) RADIO OVERVIEW Channel Selector Knob On/Off/Volume Knob Top Button (programmable) LED Indicator Microphone Dust Cover covering the Accessories Port Front Buttons (programmable) Keypad English #WarisPopUser.book Page 4 27, May 1998, 2:06 PM Radio Overview On/Off/Volume Knob Used to turn the radio on or off, and to increase the radio’s volume. Channel Selector Knob RADIO OVERVIEW Used to switch the radio to different channels. Programmable Buttons ,/. Key Short Press Monitor/ Permanent Monitor To monitor the selected channel for any activity. Volume Set Battery Gauge English The three Front Buttons (not available for radios without the keypad), as shown, the top button and the three side buttons can be programmed as short-cut buttons for many of the radio’s features. The following table shows the functions available by pressing the programmable buttons (short press) and by pressing and holding the programmable buttons for a period of time (long press). Check with your dealer for a complete list of the functions your radio’s programmable buttons support. Long Press Press and Hold To continually monitor the selected channel. You can use to adjust your radio’s volume level. To check the battery’s status. #WarisPopUser.book Page 5 27, May 1998, 2:06 PM Radio Overview Short Press Long Press Press and Hold Scan/Nuisance Channel Delete To toggle between the start/stop of the Scan operation. To delete a nuisance channel while scanning. Tx Power To toggle your radio’s transmit power level between High and Low power.† To toggle your radio’s transmit power level between High and Low power.† To toggle between locking/ unlocking your radio’s keypad. Keypad Lock Repeater/ Talkaround To choose to make/not to make a radio call through the repeater.† To choose to make/not to make a radio call through the repeater.† Squelch To toggle your radio’s squelch level between tight/normal squelch.† To toggle your radio’s squelch level between tight/normal squelch.† To toggle the activation/ deactivation of your radio’s option board (if one is installed).† To toggle the activation/ deactivation of your radio’s option board (if one is installed).† Option Board RADIO OVERVIEW Key English #WarisPopUser.book Page 6 27, May 1998, 2:06 PM Radio Overview Key Short Press RADIO OVERVIEW Press and Hold Phone To make a Phone Call.† To make a Phone Call.† Speed Dial To easily access the phone numbers in your phone list.† To easily access the phone numbers in your phone list.† To activate your radio’s backlight.† To activate your radio’s backlight.† Light English Long Press † Depending on how your radio has been programmed by your dealer, these functions are activated EITHER through short press OR long press, but not both. Push-to-Talk (PTT) Button Microphone Press and hold down this button to talk, release to listen. Speak clearly into it when sending a message. #WarisPopUser.book Page 7 27, May 1998, 2:06 PM Radio Overview Keypad Keys (for keypad radios only) 123 456 789 *0# Some programmable keys function as toggles. These keys use audio indicators to indicate the change. Programmable Buttons Medium pitched tone Positive Indicator Tone Negative Indicator Tone Negative Indicator Tone Scan Start Scan operation Stop Scan operation Tx Power Radio transmits at high power Radio transmits at low power Squelch Radio operates in tight squelch Radio operates in normal squelch Option Board Activates radio’s option board Deactivates radio’s option board INDICATOR TONES High pitched tone Positive Indicator Tone RADIO OVERVIEW These keys are used when dialing a phone number. Programmable Buttons Audio Indicators English #WarisPopUser.book Page 8 27, May 1998, 2:06 PM Radio Overview Positive Indicator Tone Negative Indicator Tone Keypad Lock Radio’s keypad is locked Radio’s keypad is unlocked Repeater/ Talkaround Radio DOES NOT use the repeater Radio uses the repeater RADIO OVERVIEW Programmable Buttons English #WarisPopUser.book Page 9 27, May 1998, 2:06 PM Getting Started Charging your Battery GETTING STARTED When the battery level is very low, you need to recharge the battery before you can continue to use your radio. BATTERY INFORMATION Battery Status 1. You can check your radio’s battery status by pressing the programmed Battery Gauge button (battery status is shown by the LED indicator). 2. Place the radio with the battery attached or the battery alone in the charger. The charger’s LED would indicate the charging progress. LED color Battery Level LED Indicator Green Satisfactory Yellow Low Flashing Red Very Low None Flashing Red* Battery is unchargeable. Flashing Yellow Charger is getting ready to charge. Red Battery is charging. Flashing Green Battery is 90% charged. Green Battery is fully charged. Battery is damaged. Please contact your dealer. GETTING STARTED High Status English #WarisPopUser.book Page 10 27, May 1998, 2:06 PM Getting Started ACCESSORY INFORMATION Removing the Battery battery latches Attaching the Battery 1. 2. slots 1. GETTING STARTED 2. English Fit the extensions at the bottom of the battery into the slots at the bottom of the radio’s body. Press the top part of the battery towards the radio until a click is heard. 10 3. Turn off the radio, if it is turned on. Slide the battery latches, on both sides of the battery, downwards. Pull the top part of the battery away from the radio’s body, and lift the battery from the radio’s body. #WarisPopUser.book Page 11 27, May 1998, 2:06 PM Getting Started Attaching the Antenna Attaching the Belt Clip attaching 1. 1. 2. Removing the Antenna Align the grooves of the belt clip with those of the battery. Press the belt clip downwards until a click is heard. Turn the antenna counter-clockwise until you can remove it. 11 GETTING STARTED 2. Align the threaded end of the antenna with the radio’s antenna connector. Turn the antenna clockwise to fasten it. English #WarisPopUser.book Page 12 27, May 1998, 2:06 PM Getting Started Removing the Belt Clip TURNING THE RADIO ON OR OFF belt clip tab GETTING STARTED 1. 2. English Use a key to press the belt clip tab away from the battery. Slide the belt clip upwards to remove it. ON • Turn the On-Off/Volume Control knob clockwise to turn on the radio. • Turn the On-Off/Volume Control knob counter-clockwise, until a click is heard, to turn off the radio. ADJUSTING THE RADIO’S VOLUME 1. 2. 3. 12 OFF Press and hold the Volume Set key; you will hear a continuous tone. Turn the On-Off/Volume Control knob and adjust the volume level. Release the Volume Set key. #WarisPopUser.book Page 13 27, May 1998, 2:06 PM Getting Started SELECTING A RADIO CHANNEL Your radio offers sixteen (16) channels for easy access to required conventional channels. Some channels on your radio may not programmed. Check with your dealer for more information. Turn the Channel Selector knob clockwise or counter-clockwise until you reach the desired channel. SENDING A CALL 1. 2. 3. Use the Channel Selector knob to change to the required channel. Press the PTT, and speak clearly with your mouth about 2.5 to 5 cm (one to two inches) away from the microphone. Release the PTT when you finish speaking. GETTING STARTED RECEIVING A CALL 1. 2. 3. 4. Turn your radio on. Adjust its volume level. Switch to the desired channel. If at any time a call comes through, you will hear the call at the volume level set. 13 English #WarisPopUser.book Page 14 27, May 1998, 2:06 PM GETTING STARTED Getting Started English 14 #WarisPopUser.book Page 15 27, May 1998, 2:06 PM Radio Call Information RADIO CALL INFORMATION In your communications network, you may be using a repeater to cover a larger area than what is possible with your radio. However, you can communicate with another radio within your radio’s range without going through the repeater by using the Talkaround feature. This is especially useful when the repeater is down. Press the programmed Repeater/Talkaround button to toggle between the options of making or not making a call through the repeater. A positive indicator tone indicates that the radio is in repeater mode, while a negative indicator tone indicates that the radio is in talkaround mode. SQUELCH If a particular channel receives many unwanted calls coming from radios that do not belong to your communications group and some distance away, or the “background noise” is excessive, you can try to filter these transmissions out by Press the programmed Squelch button to toggle between the options of having normal squelch or tightening the squelch of your radio. A positive indicator tone indicates that the radio is operating in tight squelch, while a negative indicator tone indicates that the radio is operating in normal squelch. RADIO CALL INFORMATION TALKAROUND tightening the channel’s squelch. However, tightening squelch could cause calls from members of your communications group that are farther away to be filtered out as well. POWER LEVEL You can transmit your calls at different transmit power levels. A higher level means you can reach a radio that is farther away. Lower power level conserves battery power. You are advised to transmit as frequently as possible on low power, and use high power only when needed. Press the programmed Tx Power button to toggle between the options for High or Low power transmit level. A positive indicator tone indicates that the radio is operating in high power mode, while a negative indicator tone 15 English #WarisPopUser.book Page 16 27, May 1998, 2:06 PM RADIO CALL INFORMATION Radio Call Information English indicates that the radio is operating in low power mode. 16 #WarisPopUser.book Page 17 27, May 1998, 2:06 PM Scan SCAN TALKBACK If the programmable Talkback option is set, you can respond to any calls received during the scan operation by pressing the PTT before the programmed hang-time ends. Check with your dealer for details. You can monitor several channels in order to receive any call that is transmitted on any of these channels. Sixteen different channels can be programmed into a scan list. Each channel can share the same scan list or have different scan lists assigned to them. Once the radio’s scan operation is activated and the radio detects a call coming through a channel in its scan list, it switches to that channel for you to receive the call. The LED Indicator will blink (yellow) during a scan operation. It will stop blinking when the radio switches to a channel. 1. 2. Press the Scan key to start a scan operation. Press the Scan key again to stop the scan operation. If a channel continually generates unwanted calls/noise, you can temporarily remove it from the scan list by performing a Nuisance Channel Delete operation. 1. 2. While the radio is on the Nuisance Channel, press and hold the Scan key until you hear a tone. Release the Scan key. Note: SCAN STARTING OR STOPPING A SCAN OPERATION DELETING A NUISANCE CHANNEL You cannot perform a Nuisance Channel Delete on a priority channel or if there is only one remaining channel in the scan list. 17 English #WarisPopUser.book Page 18 27, May 1998, 2:06 PM Scan ADDING A DELETED NUISANCE CHANNEL BACK TO THE SCAN LIST 1. 2. Press the Scan key to stop the scan operation. Press the Scan key again to re-start the scan operation. SCAN CHANNEL DISCOVERY ALERT SCAN Sometimes you need to know which channel the radio has switched to during a scan operation. The Scan Channel Discovery Alert gives you this information. This feature gives you audio feedback, after you have stopped a scan operation, when you change to the last channel that was switched to by the scan operation. 1. 2. 3. English Stop the scan operation. Turn the Channel Selector to change the channels. When you reach the last channel the scan operation switched to, the radio will give an alert tone. 18 SCAN LIST MEMBER PRIORITY A channel in your scan list may be prioritized (check with your dealer for details). In such a case, the radio will check that prioritized channel more frequently than the other nonprioritized channels. Note: Even though your radio has switched to a non-priority channel, your radio will still check for activity on the priority channel. If some activity is detected there, the radio will switch to that priority channel. #WarisPopUser.book Page 19 27, May 1998, 2:06 PM Phone PHONE You can use your radio to connect to a phone line to make a phone call. You need a radio with a keypad to do this. To do this, your radio must send an access code to a station that connects it to a phone line. After you have finished your call, the radio has to send a deaccess code to shutdown the connection to the phone line. MAKING A PHONE CALL A complete phone session consists of entering the phone mode • sending the access code • sending the phone number • having the phone conversation • ending the phone call. Before you can make a phone call, you must enter the radio’s phone mode. 1. Press the Phone button. Sending the Access Code Your radio can be programmed to send the access code in any of the following three ways: • manual (for radios with keypad only) • automatic delay • automatic immediate. Check with your dealer for more details. Method Used Steps to Take Manual Dial the access code from the keypad. Automatic Delay Press and release the PTT; the radio automatically sends the preprogrammed access code. 19 PHONE • Entering the Phone Mode English #WarisPopUser.book Page 20 27, May 1998, 2:06 PM Phone Method Used Automatic Immediate Steps to Take You do not have to do anything; the radio immediately sends the access code when it enters phone mode. • live dial • buffered dial. Check with your dealer for details. Sending a Stored Phone Number You can access the stored phone numbers by • recalling the last number dialed, • using the speed dial feature. Sending the Phone Number After the access code is sent, you should wait for a dialing tone before sending your phone number. PHONE You can send English • a phone number that is stored in the radio, or • a new number (for radios with keypad only). Additionally, depending on how your radio is programmed, if you use the keypad to send a number, the radio can send the numbers in one of the following ways: 20 Method Used Last Number Redial* Steps to Take Press and release the PTT again; the radio sends the last number dialed. #WarisPopUser.book Page 21 27, May 1998, 2:06 PM Phone Method Used Speed Dial Steps to Take 1. 2. 3. 4. Press and release the programmed Speed Dial button. Press the numbered keys (1-9) corresponding to the first nine phone numbers in the phone list. Press “0” if you want the last number dialed. If your radio uses buffered dial, press and release the PTT. The radio sends out the relevant phone number. * The method described is not applicable for radios which manually send the access code; these radios can access this number from the speed dial. Sending a New Number (for radios with keypad only) You enter the phone number by pressing the relevant keys on the keypad. Method Used Steps to Take Live Dial Enter the phone number by using the keypad; the radio sends out the numbers as the keys are pressed. Buffered Dial 1. 2. Enter the phone number by using the keypad; the radio saves the numbers selected in a buffer. Press and release the PTT; the radio sends out the numbers in its buffer. PHONE 21 English #WarisPopUser.book Page 22 27, May 1998, 2:06 PM Phone The Phone Conversation Once the radio has connected to the intended party, you can begin the conversation. Even though, this is a phone call, your conversation mimics a radio call (i.e. both parties speak in turn). 1. 2. 3. Press and hold the PTT, while talking into the microphone. Release the PTT when you finish what you want to say, and wait for the response. Continue in like manner until the conversation ends. PHONE Note: The radio starts a programmable Time-Out-Timer the moment both parties stop transmitting (talking). If the Time-Out-Timer expires, the radio will end the phone call. Ending the Phone Call Just as the radio needs to send the access code when starting a phone call, the radio needs to send the deaccess code to end the phone call. English 22 The radio can send the deaccess code in any of the following ways: • manual (for radios with keypad only) • automatic. Check with your dealer for details. 1. 2. If your radio sends the deaccess code manually, dial the deaccess code from the keypad. Press the Phone button to exit phone mode (radios using the automatic method will send the code automatically). #WarisPopUser.book Page 23 27, May 1998, 2:06 PM Safety Information SAFETY INFORMATION This document provides information and instructions for the safe and efficient operation of Motorola Portable and Mobile Two-Way Radios. The information provided in this document supersedes the general safety information contained in user guides published prior to 1st. January 1998. For information regarding radio use in hazardous areas, please refer to the Factory Mutual (FM) approval manual supplement or Instruction Card which is included with radio models that offer this capability. Exposure To Radio Frequency Energy Your Motorola Two-Way Radio, which generates and radiates radio frequency (RF) electromagnetic energy (EME) is designed to comply with the following National and SAFETY INFORMATION SAFE AND EFFICIENT OPERATION OF MOTOROLA TWO-WAY RADIOS International Standards and Guidelines regarding exposure of human beings to radio frequency electromagnetic energy: • Federal Communications Commission Report and Order No. FCC 96-326 (August 1996) • American National Standards Institute (C95.1 - 1992) • National Council on Radiation Protection and Measurements (NCRP-1986) • International Commission on Non-Ionizing Radiation Protection (ICNRP- 1986) • European Committee for Electrotechnical Standardisation (CENELEC): •ENV 50166-1 1995 E Human exposure to electromagnetic fields Low frequency (0 Hz to 10 kHz) •ENV 50166-2 1995 E Human exposure to electromagnetic fields High frequency (10 kHz to 300 GHz) 23 English #WarisPopUser.book Page 24 27, May 1998, 2:06 PM SAFETY INFORMATION Safety Information •Proceedings of SC211/B 1996 “Safety Considerations for Human Exposure to EMFs from Mobile Telecommunication Equipment (MTE) in the Frequency Range 30MHz - 6 GHz.”(EMF Electro-Magnetic Fields) To assure optimal radio performance and to ensure that your exposure to radio frequency electromagnetic energy is within the guidelines in the above standards, always adhere to the following procedures: • Electromagnetic Interference/Compatibility Note:Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. • To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospital or health facilities may be using equipment that is sensitive to external RF energy. • When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with airline regulations or crew instructions. Portable Radio Operation And EME Exposure •When transmitting with a portable radio, hold radio in a vertical position with the microphone 2.5 to 5 centimeters (one or two inches) away from the mouth. Keep antenna at least 2.5 centimeters (one inch) from your head or body when transmitting. MAN WITH RADIO English 24 If you wear a portable Two-Way radio on your body, ensure that the antenna is at least 2.5 centimeters (one inch) from the body when transmitting. #WarisPopUser.book Page 25 27, May 1998, 2:06 PM Safety Information Operational Warnings • WARNING Do not place a portable radio in the area over an airbag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of vehicle. Potentially explosive atmospheres • Turn off your Two-Way radio when you are in any area with a potentially explosive atmosphere, unless it is a radio type especially qualified for use in such areas (e.g. FM or Cenelec approved). Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. Blasting caps and areas • To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps. In a “blasting area” or in areas posted “turn off two-way radio”, obey all signs and instructions. Note: The areas with potentially explosive atmospheres referred to above include fuelling areas such as: below decks on boats; fuel or chemical transfer or storage facilities; areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. Operational Cautions Batteries • Do not replace or recharge batteries in a potentially explosive atmosphere. Contact sparking may occur while installing SAFETY INFORMATION Vehicles with an air bag or removing batteries and cause an explosion. Damaged antennas • Caution Do not use any portable twoway radio that has a damaged antenna. If 25 English #WarisPopUser.book Page 26 27, May 1998, 2:06 PM SAFETY INFORMATION Safety Information English a damaged antenna comes into contact with your skin, a minor burn can result. Batteries • All batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewellery, keys or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse or other container with metal objects. 26 Motorola Penang Bayan Lepas Free Industrial Zone Phase III 11900 Penang Malaysia May, 1998
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Create Date : 1998:05:27 14:09:07 Producer : Acrobat Distiller 3.0 for Power Macintosh Creator : FrameMaker5: AdobePS 8.5.1 Author : ramesh Title : #WarisPopUser.book Modify Date : 1998:06:11 16:45:10 Page Count : 30 Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools