Motorola Solutions 89FT4827 HAND HELD PORTABLE RADIO TO BE USED IN THE FAMILY User Manual iNSTRUCTION MANUAL

Motorola Solutions, Inc. HAND HELD PORTABLE RADIO TO BE USED IN THE FAMILY iNSTRUCTION MANUAL

iNSTRUCTION MANUAL

Download: Motorola Solutions 89FT4827 HAND HELD PORTABLE RADIO TO BE USED IN THE FAMILY User Manual iNSTRUCTION MANUAL
Mirror Download [FCC.gov]Motorola Solutions 89FT4827 HAND HELD PORTABLE RADIO TO BE USED IN THE FAMILY User Manual iNSTRUCTION MANUAL
Document ID4039
Application IDJP+gjGPBqT6oxps4Y++qkQ==
Document DescriptioniNSTRUCTION MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.13kB (14086 bits)
Date Submitted1998-07-14 00:00:00
Date Available1998-09-09 00:00:00
Creation Date2001-07-16 11:24:00
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2001-07-16 11:24:01
Document TitleiNSTRUCTION MANUAL

MOTOROLA INC
FCC ID: AZ489FT4827
INSTRUCTION MANUAL
Preliminary Manual attached.
Complete Manual attached.
MOTOROLA INC
FP7 SLK Manual updates ver 0.1
TEXT REMOVALS:
• Remove 3rd Note under To Set
Channel and Code regarding
voice verification of settings.
• Remove section on To Check
Channel and Code.
• Remove Belt Clip
FEATURE REVISIONS:
After Let’s Talk About Your New Radio section, insert:
Batteries
Talk About SLK radios operate on either 3 AA alkaline batteries
or a nickel metal hydride rechargeable battery pack, providing
????
• installation of both types to be noted
Set The Channel And Code
1. Current channel is the large number on the LCD
2. Press the Mode Button once, Channel indicator will appear on
display. Use the Scroll Button to set new channel.
3. Press the Mode Button twice, current code (small number)
will
flash and radio beeps to indicate code change mode.
4. Use Scroll buttons to select a new code while number is
flashing.
Note:
• To talk to other radios that do not have Interference Eliminator
Codes, set your code to 0.
• Radio automatically saves new code after 3 seconds.
Lock
Lock allows you to disable the radios primary settings so they
can not be changed accidentally. To activate the Lock feature,
press the Lock button. The radio will beep and the Lock
indicator will appear on the display. Only the Push-To-Talk
(PTT), Monitor, Light, and Power buttons will remain active.
• verify with software statement of work
The radio will beep if any disabled buttons are pressed. To
disable the Lock feature, press the Lock button again. The radio
will beep and the Lock indicator will disappear.
Light
Talk About radios have a backlit display for usage in low-light
conditions. To activate the Light, press the Light button. The
light will turn on for five seconds. Pressing any other buttons on
the radio will extend the period of time the display is backlit.
Scan (TalkAbout SLK 200 only)
FCC ID: AZ489FT4827
MOTOROLA INC
Scan allows you to monitor the radio’s channels and code. When
the radio detects channel activity on your radio’s code, it stops
Scanning and locks in on the active channel. It allows you to
listen and talk back automatically to the person transmitting
without having to switch channels.
The Scan function is user adjustable to monitor either selected
Interference Eliminator Codes, all Interference Eliminator Codes,
or all frequency usage.
Note:
• To communicate in selected Interference Eliminator Code
Scan, your radio must be set to the same code as the other
radio(s) in your group. If your radio is set to a different code,
the Scan feature in this setting will not detect channel activity in
your group.
• When selected Scan type is all Interference Eliminator Codes,
you will hear all channel activity except from radios without
codes (CSQ). To hear uncoded radios, set the Scan type to
setting 3 to hear all Interference Eliminator Codes and CSQ.
To use Scan Feature
1. Press the Scan button, radio will beep and
flashing Scan indicator will appear on the
display.
2. When the radio detects channel activity,
you will hear the message. The Scan
indicator will stop flashing and the
display will indicate the active
channel.
3. Press Push-To-Talk button to talk back on
the active channel. If channel activity ceases,
the radio will return to Scan mode after
three seconds. The display will return to
the primary channel and the Scan indicator
will begin to flash again.
4. In Scan, you will always transmit back
to the channel visible on the display.
5. To turn off Scan, press the Scan
button again. The radio will beep and the
Scan indicator will disappear.
Notes:
• In Scan, after you receive a message, the radio will remain on
the active channel for three seconds before returning to Scan
mode. This will be indicated by the flashing Scan indicator.
• In Scan, you will not be able to change the primary channel or
code setting. To change the primary channel or code, first
disable Scan operation by pressing the Scan button again.
Call (TalkAbout SLK 200 only)
The TalkAbout SLK 200 has 9 user-selectable call alert tones
to alert other radio users to an incoming message and identify
the transmitting radio. Other radio users will hear your call
FCC ID: AZ489FT4827
MOTOROLA INC
FCC ID: AZ489FT4827
alert tone before receiving the incoming message. To use the
call feature, press the Call Button before pressing the Push-ToTalk button.
To change Call Tone
1. Press the Mode button four times, the call indicator will
appear on the display and the call number will appear on the
display.
2. Use the Scroll buttons to change the call tone.
VOX REVISIONS:
To Use VOX Feature:
1. Make sure the radio is off.
2. Open accessory jack cover and plug
accessory’s connector into jack.
3. Turn radio on and lower volume before
placing accessory on head or in ear. The
VOX indicator will appear on the display to
indicate that the VOX feature is active.
4. Press Monitor button while rotating Volume
Dial to adjust volume to a comfortable
listening level.
5. To transmit, speak into accessory
microphone. To receive, stop talking.
Note: There will be a brief delay between when you start or stop
talking and radio transmission.
Reset to Push-To-Talk Mode:
1. Press Push-To-Talk button once. The VOX
indicator will disappear.
2. To transmit, press Push-To-Talk button on
radio. To receive, release the Push-To-Talk.
3. To return to VOX mode, turn the radio off,
then on again.
Note: The accessory jack cover is not detachable and should be
closed when not in use.
EXHIBIT 11

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:07:16 11:24:00
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:07:16 11:24:01-04:00
Page Count                      : 4
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AZ489FT4827

Navigation menu