Motorola Solutions 89FT4837 Hand Held Transmitter, FM Communication User Manual ELP Display
Motorola Solutions, Inc. Hand Held Transmitter, FM Communication ELP Display
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 41217 |
| Application ID | uQg0IuwDdjaSkYHBY9N5Bg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 269.53kB (3369138 bits) |
| Date Submitted | 1999-06-09 00:00:00 |
| Date Available | 1999-08-17 00:00:00 |
| Creation Date | 1999-05-14 17:42:28 |
| Producing Software | Acrobat Distiller 3.0 for Power Macintosh |
| Document Lastmod | 1999-06-03 14:12:20 |
| Document Title | #ELP_Display.book |
| Document Creator | FrameMaker 5.5 PowerPC: AdobePS 8.5.1 |
| Document Author: | ramesh |
#ELP_Display.book Page 1 Friday, May 14, 1999 5:39 PM CONTENTS Parts of the Radio . . . . . . . . . . . . . . . . . . . On-Off/Volume Knob. . . . . . . . . . . . . . . Channel Selector Knob . . . . . . . . . . . . . Push-to-Talk (PTT) Button . . . . . . . . . . Microphone . . . . . . . . . . . . . . . . . . . . . . LED Indicator . . . . . . . . . . . . . . . . . . . . Programmable Buttons . . . . . . . . . . . . . Menu Keys . . . . . . . . . . . . . . . . . . . . . . Keypad Keys . . . . . . . . . . . . . . . . . . . . . LCD Screen . . . . . . . . . . . . . . . . . . . . . Indicator Tones . . . . . . . . . . . . . . . . . . . . . Programmable Buttons’ Audio Indicators. . Getting Started . . . . . . . . . . . . . . . . . . . . . 9 Battery Information. . . . . . . . . . . . . . . . . . . 9 Charging your Battery . . . . . . . . . . . . . . 9 Accessory Information . . . . . . . . . . . . . . . 10 Attaching the Battery. . . . . . . . . . . . . . 10 Removing the Battery . . . . . . . . . . . . . 10 Attaching the Antenna. . . . . . . . . . . . . 11 Removing the Antenna . . . . . . . . . . . . 11 Attaching the Belt Clip. . . . . . . . . . . . . 12 Removing the Belt Clip . . . . . . . . . . . . 12 Radio Call Information . . . . . . . . . . . . . .15 CONTENTS Radio Overview . . . . . . . . . . . . . . . . . . . . 3 Turning the Radio On or Off . . . . . . . . . . .13 Adjusting the Radio’s Volume . . . . . . . . . .13 Selecting a Radio Channel . . . . . . . . . . . .13 Sending a Call . . . . . . . . . . . . . . . . . . . . . .14 Receiving a Call. . . . . . . . . . . . . . . . . . . . .14 Repeater or Talkaround Mode. . . . . . . . . .15 Setting Tight or Normal Squelch . . . . . . . .15 Setting the Power Level. . . . . . . . . . . . . . .16 Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Starting or Stopping a Scan Operation . . .18 Talkback . . . . . . . . . . . . . . . . . . . . . . . . . .19 Deleting a Nuisance Channel . . . . . . . . . .19 Adding a Deleted Nuisance Channel back to the Scan List . . . . . . . . . . . . . . . . . . . . . . .19 Prioritization of a Scan List member . . . . .19 Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Making a Phone Call . . . . . . . . . . . . . . . . .21 Entering the Phone Mode. . . . . . . . . . .21 Sending the Access Code . . . . . . . . . .21 Sending the Phone Number . . . . . . . . .22 The Phone Conversation . . . . . . . . . . .23 Ending the Phone Call . . . . . . . . . . . . .23 English CONTENTS #ELP_Display.book Page 2 Friday, May 14, 1999 5:39 PM Phone List . . . . . . . . . . . . . . . . . . . . . . . . Adding an Entry to the Phone List . . . Deleting an Entry . . . . . . . . . . . . . . . . Editing an Entry. . . . . . . . . . . . . . . . . . 24 24 24 25 Audio/Tone Settings . . . . . . . . . . . . . . . 27 General Instructions . . . . . . . . . . . . . . . . . 27 Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . 28 General Instructions . . . . . . . . . . . . . . . . . 28 Safety Information . . . . . . . . . . . . . . . . . 29 Safe And Efficient Operation Of Motorola TwoWay Radios . . . . . . . . . . . . . . . . . . . . . . . 29 Exposure To Radio Frequency Energy 29 Portable Radio Operation and EME Exposure . . . . . . . . . . . . . . . 30 Electromagnetic Interference/Compatibility . . . . . . . . . . 30 Operational Warnings . . . . . . . . . . . . . 30 Operational Cautions . . . . . . . . . . . . . 31 Recycling/Disposal of NiCd Batteries. . . . 32 English #ELP_Display.book Page 3 Friday, May 14, 1999 5:39 PM RADIO OVERVIEW PARTS OF THE RADIO Channel Selector Knob RADIO OVERVIEW On-Off/Volume Knob Side Button 1 (programmable) Side Button 2 (programmable) Push-to-Talk (PTT) Button LED Indicator Microphone Dust Cover covering the Accessories Port LCD Screen Menu Keys Keypad English #ELP_Display.book Page 4 Friday, May 14, 1999 5:39 PM On-Off/Volume Knob LED State/Color Turns the radio on or off, and adjusts the radio’s volume. Channel Selector Knob Switches the radio to different channels. RADIO OVERVIEW Push-to-Talk (PTT) Button Press and hold down this button to talk; release it to listen. Microphone Scan Scanning for activity. Blinking Green* Low Battery Blinking Red when Low battery level. sending message * Only if this feature is programmed into your radio. Check with your dealer for more details. Programmable Buttons Your radio’s two side buttons can be programmed by your dealer as short-cut buttons for many of the radio’s features. Speak clearly into the microphone when sending a message. Check with your dealer for a complete list of the functions your radio’s programmable buttons support. LED Indicator The table on page 5 shows the functions available by Indicates power-up, radio call and scan status. LED State/Color Radio Call Continuous Red Blinking Red Power Level *Continuous Red *Continuous Green English Indication Indication Sending message. Receiving message. Sending message in high power. Sending message in low power. • short press - quickly pressing and releasing the programmable buttons, or • long press - pressing and holding the programmable buttons for a period of time (at least 1.5 seconds) before releasing, or • hold down- pressing and holding down the programmable buttons while checking status or making adjustments. #ELP_Display.book Page 5 Friday, May 14, 1999 5:39 PM Depending on how your radio has been programmed by your dealer, these functions are Button activated EITHER through short press OR long press, but NOT both. Short Press/Long Press Hold Down Monitor — Monitors the selected channel for any activity. Volume Set — Sounds a tone for adjusting the radio’s volume level. Starts or stops the Scan operation. — Nuisance Channel Delete Deletes a nuisance channel while scanning. — Power Level Toggles your radio’s transmit power level between High and Low power. — Repeater/ Talkaround Toggles between using a repeater and transmitting directly to another radio. — Squelch Toggles your radio’s squelch level between tight and normal squelch. — Keypad Lock Locks or unlocks your radio’s keypad. — Phone Makes a Phone Call. — Speed Dial Accesses the phone numbers in your phone list. — Light Turns on your radio’s backlight. — RADIO OVERVIEW Scan English GuidePics Page 6 Friday, May 14, 1999 6:06 PM Menu Keys Keypad Keys Exit Up Menu/Select RADIO OVERVIEW Down Menu/Select Key Enters Menu Mode. When already in Menu Mode, makes Menu selections. When entering information for the programming lists, each key can generate numeric information. LCD Screen Exit Key Backs up one level in the Menu hierarchy (short press); also exits the Menu Mode (long press). Up Key Used for scrolling when in Menu Mode. Used as a backspace key when editing. Down Key Used for scrolling when in Menu Mode. Moves the cursor right or inserts a space when editing. English Used to dial a phone number or enter programming list entries. Used to display channel, menu as well as other iconic information. ABCDEFGHJ #ELP_Display.book Page 7 Friday, May 14, 1999 5:39 PM Symbol Name and Description Symbol Companding Indicator Indicates that you have activated the companding feature. Talkaround Indicator Power Level Indicator Phone Indicator Indicates that you are performing a Phone operation. When lit, indicates that you are not transmitting through the repeater. When not lit, you are transmitting through the repeater. Programming Mode Indicator Indicates that you are editing one of the Program Lists. Keypad Lock Indicator Indicates that your keypad is locked. Scan Indicator Indicates that you have activated the Scan feature. Also during Scan, indicates that there is some activity on a non-priority channel. RADIO OVERVIEW “L” is lit up when your radio is configured to transmit in Low Power, while “H” is lit up when your radio is configured to transmit in High Power. Name and Description Priority 1 Scan Indicator ( flashing) During Scan, indicates that there is some activity on a Priority 1 channel. Monitor Indicator Indicates that you are monitoring the selected channel. English #ELP_Display.book Page 8 Friday, May 14, 1999 5:39 PM INDICATOR TONES High pitched tone Low pitched tone Button Self Test Pass Tone RADIO OVERVIEW Positive Indicator Tone Negative Indicator Tone PROGRAMMABLE BUTTONS’ AUDIO INDICATORS Some programmable keys function as toggles (alternating between two different choices). These keys use audio indicators to indicate the change. English Negative Indicator Tone Start Scan Stop Scan operation operation Radio Radio Power Level transmits at transmits at high power low power Radio operates Radio operates Squelch* in tight in normal squelch squelch Radio DOES Radio uses the Repeater/Talkaround NOT use the repeater repeater Radio’s keypad Radio’s keypad Keypad Lock is locked. is unlocked. * There is no visual indicator for the Squelch function. Scan Self Test Fail Tone Positive Indicator Tone #ELP_Display.book Page 9 Friday, May 14, 1999 5:39 PM GETTING STARTED BATTERY INFORMATION Charging your Battery When the battery level is very low, a blinking red LED indicator lights up during transmit mode, and an alert tone sounds. You will need to recharge the battery before you can continue to use your radio. Place the radio with the battery attached or the battery alone in the charger. The charger’s LED indicator will indicate the charging progress. LED color Single flash of Green Flashing Red* Status Red Successful charger power-up. Battery is unchargeable. Charger is getting ready to charge. Battery is charging. Flashing Green† Green Battery is fully charged. Flashing Yellow Battery is 90% charged. * Remove the battery from charger and use a pencil eraser to clean the four metal contacts on the bottom of the battery. Place the battery back into the charger. If the LED indicator continues to flash red, replace the battery. † A standard battery may require one hour to charge to 90% capacity. GETTING STARTED NOTE: Since new batteries or batteries that have not been used for several months could prematurely indicate full charge (solid green LED), charge the batteries for 14 to 16 hours prior to initial use to achieve optimal performance. English #ELP_Display.book Page 10 Friday, May 14, 1999 5:39 PM ACCESSORY INFORMATION Removing the Battery Attaching the Battery GETTING STARTED 1. 2. English Fit the extensions at the bottom of the battery into the slots at the bottom of the radio’s body. 1. Turn off the radio, if it is turned on. 2. Slide the battery latches on both sides of the battery downwards. Press the top part of the battery toward the radio until you hear a click. 3. Pull the top part of the battery away from the radio body. 10 #ELP_Display.book Page 11 Friday, May 14, 1999 5:39 PM Attaching the Antenna Turn the antenna counter-clockwise to remove it. 11 GETTING STARTED Turn the antenna clockwise to attach it. Removing the Antenna English #ELP_Display.book Page 12 Friday, May 14, 1999 5:39 PM Attaching the Belt Clip Removing the Belt Clip GETTING STARTED 1. Align the grooves of the belt clip with those of the battery. 1. Use a key to press the belt clip tab away from the battery. 2. Press the belt clip downward until you hear a click is heard. 2. Slide the belt clip upward to remove it. English 12 #ELP_Display.book Page 13 Friday, May 14, 1999 5:39 PM TURNING THE RADIO ON OR OFF ADJUSTING THE RADIO’S VOLUME 1. Press and hold the preprogrammed Volume Set button; you will hear a continuous tone. 2. Turn the On-Off/Volume Control knob and adjust the volume level. 3. Release the preprogrammed Volume Set button. SELECTING A RADIO CHANNEL ON 1. OFF Turn the On-Off/Volume Control knob clockwise to turn on the radio. You will hear the Self Test Pass Tone ( ) and see a green LED if the radio powers up successfully. If the radio fails its self test, you will hear Your radio offers 16 channels for easy access to required conventional channels. Some channels on your radio may not be programmed. Check with your dealer for more information. Turn the Channel Selector knob clockwise or counter-clockwise until you reach the desired channel. 2. GETTING STARTED the Self Test Fail Tone ( ). Switch off and on again and if fault persists contact your dealer. To turn off the radio, turn the On-Off/Volume Control knob counter-clockwise, until you hear a click. 13 English #ELP_Display.book Page 14 Friday, May 14, 1999 5:39 PM SENDING A CALL RECEIVING A CALL 1. Turn your radio on. 1. 2. Use the Channel Selector knob to select the desired channel. 2. Adjust the radio’s volume. 3. Switch to the desired channel. Hold the radio in a vertical position with its microphone 2.5 to 5 cm (one to two inches) away from your mouth. Hold the radio in a vertical position, press the PTT button, and talk at a distance of about 2.5 to 5 cm (one to two inches) from the microphone. 4. Release the PTT button to listen. GETTING STARTED 3. English 14 Turn your radio on. #ELP_Display.book Page 15 Friday, May 14, 1999 5:39 PM —or— RADIO CALL INFORMATION Talkaround Mode enables you to communicate with another radio when either: • the repeater is not operating 1. ) to enter Menu Mode. 2. < or > until TLK ARD 3. ) to select TLK ARD 4. < or > until OFF —or— (talk through repeater) • your radio is out of the repeater’s range but within communicating distance of another radio. NOTE: The F symbol will appear on the LCD screen when Talkaround Mode is selected. To select either Repeater Mode or Talkaround Mode: Press the preprogrammed Repeater/ Talkaround button to toggle between the two modes. A positive indicator tone indicates that the radio is in talkaround mode, while a negative indicator tone indicates that the radio is in repeater mode. RADIO CALL INFORMATION REPEATER OR TALKAROUND MODE or until ON (talk directly without going through repeater). 5. ) to select the desired option. SETTING TIGHT OR NORMAL SQUELCH Use this feature to filter out nuisance (unwanted) calls and/or background noise. However, tightening squelch could cause calls from remote locations to be filtered out as well. In this case, normal squelch may be more desirable. To select tight or normal squelch: Press the preprogrammed Squelch button to toggle between tight and normal squelch. A 15 English RADIO CALL INFORMATION #ELP_Display.book Page 16 Friday, May 14, 1999 5:39 PM positive indicator tone indicates that the radio is operating in tight squelch, while a negative indicator tone indicates that the radio is operating in normal squelch. SETTING THE POWER LEVEL Each channel in your radio has a predefined transmit power level that can be changed. • High power (H) allows you to reach a radio that is farther away. • Low power (L) conserves the battery’s charge. —or— 1. ) to enter Menu Mode. 2. < or > until UTILITY 3. ) to select UTILITY 4. < or > until SQUELCH 5. ) to select SQUELCH 6. < or > until TIGHT To set the power level: (tighten channel’s squelch), or until NORMAL (channel operates under normal squelch). 7. English ) to select the squelch setting. 16 Press the preprogrammed Power Level button to toggle between low and high transmit power level. A positive indicator tone indicates that the radio is in high power mode, while a negative indicator tone indicates that the radio is in low power mode. —or— 1. ) to enter Menu Mode. 2. < or > until UTILITY 3. ) to select UTILITY 4. < or > until TX PWR 5. ) to select TX PWR #ELP_Display.book Page 17 Friday, May 14, 1999 5:39 PM 6. HIGH RADIO CALL INFORMATION < or > until (to transmit at high power), or until LOW (to transmit at low power). 7. ) to select the power level. 17 English #ELP_Display.book Page 18 Friday, May 14, 1999 5:39 PM To start or stop a scan operation: SCAN You can monitor several channels in order to receive any call that is transmitted on any of these channels. Sixteen different channels can be programmed into each scan list by the dealer. 1. Press the preprogrammed Scan button to start a scan operation. You will hear a positive indicator tone. 2. Press the preprogrammed Scan button again to stop the scan operation. You will hear a negative indicator tone. Once the radio’s scan operation is activated and the radio detects a call coming through a channel in its scan list, it switches to that channel for you to receive the call. SCAN NOTE: The same channels can be assigned to different scan lists. STARTING OR STOPPING A SCAN OPERATION The E symbol, and the channel you are transmitting on, will appear on the LCD screen when you start a scan operation. —or— 1. ) to enter Menu Mode. 2. < or > until SCAN 3. ) to select SCAN 4. < or > until ON (to start a scan operation), or until The LED indicator blinks green during a scan operation, and stops blinking when the radio switches to a channel. NOTE: If you enter Menu Mode while the radio is scanning, scanning will stop. It will resume when you exit Menu Mode. English 18 OFF (to stop a scan operation). 5. ) to select the desired option. NOTE: The LED indicator will blink (green) during a scan operation. It will stop blinking when the radio switches to a channel. #ELP_Display.book Page 19 Friday, May 14, 1999 5:39 PM TALKBACK If the programmable Talkback option is set, you can respond to any calls received during the scan operation by pressing the PTT before the programmed hang-time ends. Check with your dealer for details. DELETING A NUISANCE CHANNEL 1. While the radio is on the Nuisance Channel, press the preprogrammed Nuisance Channel Delete button until you hear a tone. 2. Release the Nuisance Channel Delete button. The nuisance channel is deleted. NOTE: You cannot perform a Nuisance Channel Delete on a priority channel or if there is only one remaining channel in the scan list. 1. Press the Scan button to stop the scan operation. 2. Press the Scan button again to re-start the scan operation. The Deleted Nuisance Channel is reinstated to the scan list. PRIORITIZATION OF A SCAN LIST MEMBER You may want your radio to check a particular channel more frequently for calls. Prioritization of scan list members is done by your dealer using the Customer Programming Software. Check with your dealer for details. Priority Channel SCAN If a channel continually generates unwanted calls or noise (a “nuisance” Channel), you can temporarily remove it from the scan list by performing a Nuisance Channel Delete operation. ADDING A DELETED NUISANCE CHANNEL BACK TO THE SCAN LIST Scanning Sequence None specified Ch1➠Ch2➠Ch3➠ Ch4➠...Ch1 Channel 2 Ch2➠Ch1➠Ch2➠Ch3➠ Ch2➠Ch4➠Ch2➠...Ch1 19 English #ELP_Display.book Page 20 Friday, May 14, 1999 5:39 PM SCAN Even though your radio has switched to a nonpriority channel, your radio will still check for activity on the priority channel. If activity is detected the radio will switch to the priority channel. English 20 #ELP_Display.book Page 21 Friday, May 14, 1999 5:39 PM Entering the Phone Mode PHONE Before you can make a phone call, you must enter the radio’s Phone mode. You can use your radio to connect to a phone line to make a phone call. To do this, your radio must send an access code to a station that connects it to a phone line. After you have finished your call, the radio has to send a deaccess code to shutdown the connection to the phone line. MAKING A PHONE CALL You can make a phone call by using the menu or by using the programmed Phone button. The D icon will light up on the LCD screen when you are in Phone mode. A complete phone session consists of entering the Phone mode sending the access code sending the phone number having the phone conversation ending the phone call. To enter the Phone mode via the menu: 1. ) to enter Menu Mode. 2. < or > until PHONE 3. ) to select PHONE You will see the last phone number dialed; shown here as 5554567 Sending the Access Code Your radio can be programmed to send the access code in any of the following ways: • manual (for radios with keypad only) • automatic delayed • automatic immediate. Check with your dealer for more details. 21 PHONE • • • • • 1. Press the Phone button. English #ELP_Display.book Page 22 Friday, May 14, 1999 5:39 PM Sending a Stored Phone Number Method Manual* Automatic Delayed Automatic Immediate Steps to Take Dial the access code from the keypad. Press and release the PTT; the radio automatically sends the preprogrammed access code. You do not have to do anything; the radio immediately sends the access code when it enters phone mode. for radios with keypad only You can access the stored phone numbers by • recalling the last number dialed, • using the phone list, or • using the speed dial feature (for radios with keypad only). Method Last Number Redial* Press and release the PTT; the radio sends the last number dialed. Phone List 1. Press < or > to scroll the phone list until you reach the desired phone number.† 2. Press and release the PTT to send the number. Speed Dial 1. Press and release the programmed Speed Dial button. 2. Press the numbered keys (1-9) corresponding to the first nine phone numbers in the phone list. Press “0” if you want the last number dialed. 3. If your radio uses buffered dial, press and release the PTT. 4. The radio sends out the phone number. Sending the Phone Number After the access code is sent, you should wait for a dialing tone before sending your phone number. You can send PHONE • a phone number that is stored in the radio, or • a new number (for radios with keypad only). Additionally, depending on how your radio is programmed, if you use the keypad to send a number, the radio can send the numbers in one of the following ways: • live dial • buffered dial. Check with your dealer for details. English 22 Steps to Take * The method described is not applicable for radios which manually send the access code; these radios can access this number from the phone list or the speed dial. † For radios that manually send the access code, press the Down Key once to access the last number dialed. #ELP_Display.book Page 23 Friday, May 14, 1999 5:39 PM Sending a New Number (for radios with keypad only) You enter the phone number by pressing the relevant keys on the keypad. Method Live Dial Buffered Dial Steps to Take 3. NOTE: The radio starts a programmable Time-OutTimer the moment both parties stop transmitting (talking). If the Time-Out-Timer expires, the radio will end the phone call. Enter the phone number by using the keypad; the radio sends out the numbers as the keys are pressed. 1. Enter the phone number by using the keypad; the radio saves the selected numbers in a buffer. 2. Press and release the PTT; the radio sends out the numbers in its buffer. Ending the Phone Call Just as the radio needs to send the access code when starting a phone call, the radio needs to send the deaccess code to end the phone call. The radio can send the deaccess code in any of the following ways: • manual (for radios with keypad only), and • automatic. The Phone Conversation 1. Press and hold the PTT, while talking into the microphone. 2. Release the PTT when you finish what you want to say, and wait for the response. Check with your dealer for details. 1. If your radio sends the deaccess code manually, dial the deaccess code from the keypad. 2. Press the Phone button to exit phone mode. NOTE: Radios using the automatic method will send the deaccess code automatically. PHONE Once the radio has connected to the intended party, you can begin the conversation. Even though this is a phone call, your conversation mimics a radio call (that is, both parties speak in turn). Repeat steps 1 and 2 until the conversation ends. or 2. Exit the phone mode using the menu: 23 English Phone Page 24 Friday, May 14, 1999 6:17 PM ( to exit phone mode and return to PHONE or Hold ( to exit the Menu Mode. NOTE: Radios using the automatic method will send the deaccess code automatically. PHONE LIST 5. ) to select PHONE 6. < or > until ADD 7. ) to select ADD You will see NUMBER 8. Use the keypad to enter the phone number. Press the numeric keys to enter the numbers. You can also add a dash (press >) and a Pause Indicator (press and hold # the key until the # character on the LCD screen changes to a “P”). 9. ) to store the phone number. ) again to confirm its storage. Your radio can store a list of frequently accessed phone numbers. The G icon will light up on the LCD screen when you edit the phone list. NOTE: The radio will not receive any calls when you are editing the phone list. PHONE Adding an Entry to the Phone List 1. ) to enter Menu Mode. 2. < or > until PROGRAM 3. ) to select PROGRAM 4. < or > until PHONE English 24 10. ( to return to ADD or Hold ( to exit Menu Mode. Phone Page 25 Friday, May 14, 1999 6:17 PM Deleting an Entry Editing an Entry 1. ) to enter Menu Mode. 1. ) to enter Menu Mode. 2. < or > until PROGRAM 2. < or > until PROGRAM 3. ) to select PROGRAM 3. ) to select PROGRAM 4. < or > until PHONE 4. < or > until PHONE 5. ) to select PHONE 5. ) to select PHONE 6. < or > until DELETE 6. < or > until EDIT 7. ) to select DELETE 7. ) to select EDIT 8. < or > until you see the entry you wish to delete. 8. < or > until you see the entry you wish to edit. 9. ) to select the entry. ) again to confirm the deletion. 9. ) to select the entry. DELETE or Hold ( to exit Menu Mode. or until NUMBER (to edit the entry’s phone number), or until LOCATN PHONE 10. ( to return to (to edit the entry’s location in the phone list). 25 English Phone Page 26 Friday, May 14, 1999 6:17 PM 11. ) to select the edit type. 12. Use the keypad to edit the entry. See Keypad Keys on page 6. 13. ) to store the information. 14. ( to return to EDIT or PHONE Hold ( to exit Menu Mode. English 26 #ELP_Display.book Page 27 Friday, May 14, 1999 5:39 PM AUDIO/TONE SETTINGS 4. GENERAL INSTRUCTIONS 1. ) to enter Menu Mode. 2. < or > until TONES 3. ) to select TONES Menu Items Optional Settings setting you wish to change. 5. ) to select the tones setting. You will see 6. < or > to see the available optional the current status of the setting. settings. 7. ) to select the desired setting. AUDIO/TONE SETTINGS The Audio/Tones menu allows you to customize the audio and tone settings on your radio. < or > until you see the audio/tone Use instructions above to change your radio’s audio and tones settings shown in the table below. Function ALERT ON OFF Allows you to turn all tones on or off. KEYPAD ON OFF Allows you to turn the tones associated with the radio keys on or off. 27 English #ELP_Display.book Page 28 Friday, May 14, 1999 5:39 PM UTILITIES 4. The Utilities menu allows you to customize some general settings on your radio. GENERAL INSTRUCTIONS ) to enter Menu Mode. 2. < or > until UTILITY 3. ) to select UTILITY UTILITIES 1. Menu Items English Optional Settings < or > until you see the setting that you wish to change. 5. ) to select the setting to change. You will 6. < or > to see the available optional see the current status of the setting. settings. 7. ) to select the desired setting. Use the instructions above to change your radio settings shown in the table below. Function SQUELCH NORMAL TIGHT Allows you to change the squelch setting of the radio between normal and tight. TX LEVEL HIGH LOW Allows you to change the power level of the radio between high or low. LIGHT ON OFF Allows you to turn the back-light feature of the radio on or off. 28 #ELP_Display.book Page 29 Friday, May 14, 1999 5:39 PM SAFETY INFORMATION SAFE AND EFFICIENT OPERATION OF MOTOROLA TWO-WAY RADIOS This document provides information and instructions for the safe and efficient operation of Motorola Portable Two-Way Radios. For information regarding radio use in hazardous areas, please refer to the Factory Mutual (FM) approval manual supplement or Instruction Card which is included with radio models that offer this capability. Exposure To Radio Frequency Energy • Federal Communications Commission Report and Order No. FCC 96-326 (August 1996) • American National Standards Institute (C95.1 - 1992) ENV 50166-1 1995 E ENV 50166-2 1995 E Proceedings of SC211/B 1996 Human exposure to electromagnetic fields Low frequency (0 Hz to 10 kHz) Human exposure to electromagnetic fields High frequency (10 kHz to 300 GHz) “Safety Considerations for Human Exposure to EMFs from Mobile Telecommunication Equipment (MTE) in the Frequency Range 30MHz - 6 GHz.”(EMF - Electro-Magnetic Fields) To assure optimal radio performance and to ensure that your exposure to radio frequency electromagnetic energy is within the guidelines in the above standards, always adhere to the following procedures: 29 SAFETY INFORMATION Your Motorola Two-Way Radio, which generates and radiates radio frequency (RF) electromagnetic energy (EME) is designed to comply with the following National and International Standards and Guidelines regarding exposure of human beings to radio frequency electromagnetic energy: • National Council on Radiation Protection and Measurements (NCRP-1986) • International Commission on Non-Ionizing Radiation Protection (ICNRP- 1986) • European Committee for Electrotechnical Standardisation (CENELEC): English #ELP_Display.book Page 30 Friday, May 14, 1999 5:39 PM Portable Radio Operation and EME Exposure •When transmitting with a portable radio, hold radio in a vertical position with the microphone 2.5 to 5 centimeters (one or two inches) away from the mouth. Keep antenna at least 2.5 centimeters (one inch) from your head or body when transmitting. • If you wear a portable Two-Way radio on your body, ensure that the antenna is at least 2.5 centimeters (one inch) from the body when transmitting. MAN WITH RADIO SAFETY INFORMATION Electromagnetic Interference/Compatibility English Note:Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. 30 • To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospital or health facilities may be using equipment that is sensitive to external RF energy. • When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with airline regulations or crew instructions. Operational Warnings Vehicles with an air bag • Do not place a portable radio in WARNING the area over an airbag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of vehicle. #ELP_Display.book Page 31 Friday, May 14, 1999 5:39 PM Potentially explosive atmospheres • Turn off your Two-Way radio when you are in any area with a potentially explosive atmosphere, unless it is a radio type especially qualified for use in such areas (e.g. FM or Cenelec approved). Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. Batteries • Do not replace or recharge batteries in a potentially explosive atmosphere. Contact sparking may occur while installing or removing batteries and cause an explosion. Blasting caps and areas • To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps. In a “blasting area” or in areas posted “turn off two-way radio”, obey all signs and instructions. explosive atmospheres are often but not always posted. Operational Cautions Damaged antennas • Do not use any portable two-way Caution radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Batteries • All batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewellery, keys or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse or other container with metal objects. SAFETY INFORMATION Note: The areas with potentially explosive atmospheres referred to above include fuelling areas such as: below decks on boats; fuel or chemical transfer or storage facilities; areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially 31 English #ELP_Display.book Page 32 Friday, May 14, 1999 5:39 PM RECYCLING/DISPOSAL OF NICD BATTERIES The Basel Convention classifies used NiCd batteries as hazardous waste, unless certain exemptions apply. At the end of your battery’s useful life, it can be recycled. However, recycling facilities may not be available in all areas. Under various state or local laws, such batteries must be recycled or disposed of properly, and cannot be dumped in landfills or incinerators. Motorola fully endorses and encourages the recycling of NiCd batteries. The following is a list of recycling facilities around the world, where you can ship your NiCd batteries to be recycled: SAFETY INFORMATION United States INMETCO P.O. Box 720 245 Porteville Road Ellwood City, PA 16117 Tel:(412) 758-5515 Fax:(412) 758-9311 Europe English S.N.A.M. Rue de la Garenne Z.I. Chesnes Tharabie -BP733 Saint Quentin Fallavier 38297 La Verpilliere Cedex, France Tel: 033-74-94-59-85 Fax: 033-74-94-13-18 32 Asia Hanil Metal Recycle Co. Ltd. 2404 Palryong-dong Changwon-Shi Kyongsangnam-Do, Korea Tel: 082-551-93-1911 Fax: 082-551-96-0050 Japan Onahama Refinery of Toho Zinc Co., Ltd., 10 Aza-Yoshihama, Onahama, Iwaki-City Fukushima Prefecture, Japan Marubeni Co. Head Office/Attn. B6B2 4-2 Ohtemachi 1-Choma Ciyoda-Ku, Tokyo, Japan Nippon Recycle Ctr., Corp. 6-3-19, Nishitamma, Kita-Ku Osaka, 530, Japan Tel: 081-6-311-9071 Fax: 081-311-0949 You should consider the methods of collecting, labeling, and shipping used NiCd batteries. Consult your federal, state, or local environmental authority for specific legal requirements and for recycling options in your area. Motorola, as a responsible corporate citizen, has always been concerned with the protection of the environment. Please feel free to call our toll-free number,1-800-422-4210, for further battery information.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Create Date : 1999:05:14 17:42:28 Producer : Acrobat Distiller 3.0 for Power Macintosh Creator : FrameMaker 5.5 PowerPC: AdobePS 8.5.1 Author : ramesh Title : #ELP_Display.book Modify Date : 1999:06:03 14:12:20 Page Count : 32EXIF Metadata provided by EXIF.tools