Motorola Solutions 89FT5794 iDEN i2000 User Manual

Motorola Solutions, Inc. iDEN i2000

UserManual.wiki >

Motorola Solutions >

89FT5794 User Manual >

Contents

1. User Manual
2. User manual

User manual

Motorola TM iDEN ¨ Digital Multi-Service i 2000 UserÕs Guide Final Draft 6/28/99

i Contents CONTENTS Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Setting Up Your i 2000 for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Features of Your i 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Inserting the SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Charging and Attaching the Battery . . . . . . . . . . . . . . . . . . . . . . . . 5Turning On Your i 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Light Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7SIM Card PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Entering the PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Unblocking the PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Changing the PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Disabling the PIN Requirement . . . . . . . . . . . . . . . . . . . . . . . 9Enabling the PIN Requirement . . . . . . . . . . . . . . . . . . . . . . . . 9Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11About Modes and Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Setting the Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Changing the Display Language . . . . . . . . . . . . . . . . . . . . . . . . . 14 Making Phone Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 International Phone Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Inserting Pauses into Phone Numbers . . . . . . . . . . . . . . . . . . 15Using Other Dialing Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Scroll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Name Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Last Number Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Turbo Dial¨ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Automatic Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Emergency Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Hands-Free Speakerphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Receiving a Phone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Missed Call Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18What Is My Phone Number? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19VibraCallª . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Selecting VibraCall for All Incoming Calls and Messages . 20Selecting VibraCall for Individual Services . . . . . . . . . . . . . 20Keypad Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Setting the Ringer Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Selecting a Ring Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Unconditional Call Forwarding . . . . . . . . . . . . . . . . . . . . . . 22

ii i2000 UserÕs Guide Conditional Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . 23Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Call Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243-Way Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Call Barring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Barring Incoming Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Barring Outgoing Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Viewing Call Barring Status . . . . . . . . . . . . . . . . . . . . . . . . . 27Changing Your Call Barring Passcode . . . . . . . . . . . . . . . . . 28Alternate Phone Line (iDEN Only) . . . . . . . . . . . . . . . . . . . . . . . 28Setting the Active Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Receiving a Call on Your Alternate Line . . . . . . . . . . . . . . . 29Phone Only Mode (iDEN Only) . . . . . . . . . . . . . . . . . . . . . . . . . . 29Creating, Editing, and Using Stored Lists . . . . . . . . . . . . . . . . . . 30Combined Phone Number and Private ID List . . . . . . . . . . . 30Last 10 Calls Received and Sent Lists . . . . . . . . . . . . . . . . . 34Quickstore of Phone Numbers . . . . . . . . . . . . . . . . . . . . . . . 34 Traveling between Systems . . . . . . . . . . . . . . . . . . . . . . 36 Searching for a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Storing Your Preferred List of Networks . . . . . . . . . . . . . . . 37Storing New Networks to Your Known list . . . . . . . . . . . . . . . . . 38 Making Private Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Receiving a Private Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Private/Group Mode Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Call Alertª . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Sending a Call Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Receiving a Call Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Call Alert Queuing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Clearing or Queueing a Call Alert . . . . . . . . . . . . . . . . . . . . 42Responding to a Queued Call Alert . . . . . . . . . . . . . . . . . . . 42Quickstore of Private IDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Storing Your Private ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Making Group Calls (iden only) . . . . . . . . . . . . . . . . . . 44 Receiving a Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Adding and Storing a Talkgroup . . . . . . . . . . . . . . . . . . . . . . . . . 45Area Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Private/Group Mode Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Using Mail Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

iii Contents Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Message Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Saving and Erasing Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Auto Call Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Mail Memory Full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Setting Programming Menus . . . . . . . . . . . . . . . . . . . . 49About Status Messages . . . . . . . . . . . . . . . . . . . . . . . . . 54Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Leather Carry Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Charging the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Battery Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . 56Travel Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Using the Travel Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Travel Charger Operating Specifications . . . . . . . . . . . . . . . 57Vehicular Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Using the Vehicular Battery Charger . . . . . . . . . . . . . . . . . . 58Removing the Vehicular Battery Charger . . . . . . . . . . . . . . . 58Vehicular Battery Charger Operating Specifications . . . . . . 59Desktop Dual-Pocket Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Charging a Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Audio Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Using the Audio Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Attaching/Detaching the Earpiece Microphone . . . . . . . . . . 60 Removing the Audio Adapter . . . . . . . . . . . . . . . . . . . . . . . 60 Safety and General Information . . . . . . . . . . . . . . . . . . 61 Exposure To Radio Frequency Energy . . . . . . . . . . . . . . . . . . . . 61Interference to Medical and Personal Electronic Devices . . . . . . 62Pacemakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Hearing Aids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Other Medical Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Interference to Other Electronic Devices . . . . . . . . . . . . . . . 63Safety and General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Use While Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63OPERATIONAL WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Potentially Explosive Atmospheres . . . . . . . . . . . . . . . . . . . 64Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

iv i2000 UserÕs Guide Blasting Caps and Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64For Vehicles Equipped with an Air Bag . . . . . . . . . . . . . . . . 64OPERATIONAL CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Damaged Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Cleaning Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Antenna Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Accessory Safety Information . . . . . . . . . . . . . . . . . . . . 66Limited Warranty Motorola Communication Products 68 I. What This Warranty Covers and For How Long: . . . . . . . . . . . 68II. General Provisions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69IV. How to Get Warranty Service: . . . . . . . . . . . . . . . . . . . . . . . . 69V. What This Warranty Does Not Cover: . . . . . . . . . . . . . . . . . . 69VI. Patent and Software Provisions: . . . . . . . . . . . . . . . . . . . . . . 70 OwnerÕs Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Private Number Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Talkgroup Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 European Union Directives Conformance Statement 74

v Patent and Trademark Information This product is protected under one or more of the following patents: 4817157, 4896361, 4857928, 5041793, 5060294, 5066923, 5134718, 5140156, 5239963, 5257411, 5287387, 5265219, 5289504, 5316168, 5317247, 5338396, 5389927, 5406588, 5424921, 5457376, 5460906, 5551063, 5557079, 5596487, 5615412, 5638403, 5559468, 5469465, 5170413, 5140615, 5519730, 5241544, 5584059, 5574992, 5396656, 5487091, 5533004, 5299199, 5343499, 5369501, 5509031, 5515379, 5528723, 5598417, 5066923, 5241650, 5278833, 5359696, 5548631, 5410632, 5440582, 5457735, 5457818, 5471670, 5477550, 5481537, 5566181, 5229767, 5208804, 5295140, 5381449, 5440590, 5467398, 5490230, 5620242, 5623523, 5655913, 5715240, 5771440, 5854578, 5675281 Additional patents are pending. , Motorola, iDEN, Turbo Dial, VibraCall, Call Alert, and Message Mail are trademarks or registered trademarks of Motorola, Inc.¨Reg. U.S. Pat. & Tm. Off.All other trademarks mentioned in this manual are trademarks of their respective companies.© Copyright 1999, Motorola, Inc. All rights reserved. Important! Be sure to read ÒSafety and General InformationÓ on page 61 before using your i1000 plus .

vi i2000 UserÕs Guide

1 Getting Started GETTING STARTED ongratulations on purchasing your Motorola iDEN i 2000 multi-service, digital, portable global phone. The use of two state-of-the-art technologies, iDEN and GSM (Global System for Mobile communications), provides worldwide services to keep you in constant touch with your business and personal contacts wherever you travel. A removable Subscriber Identity Module (SIM) card holds all your personal information, including secure Personal IdentiÞcation Numbers (PINs), names, and phone numbers. Just as you protect your credit and bank cards with PINs, you can safeguard your SIM card with a PIN.Exciting new features include a vibration-only key, call barring, and a missed-call indicator to help provide efÞcient operation of your i 2000. And, new ease-of-dialing features, such as Turbo Dial ¨ and the Last Ten Received and Sent lists, as well as stored names and numbers, help you to quickly make and return phone calls. Your i 2000 offers: ¥ Phone Mode - for cellular phone operation. See page 15. ¥ Private Mode - for two-way radio use to talk with one person in your iDEN service area. See page 40. ¥ Group Mode - for two-way radio use to talk with several people in your iDEN service area. See page 44. ¥ Messaging Services - for message and voice mail. See page 47. Setting Up Your i 2000 for Use Before you can use your new i 2000, youÕll need to: 1. Insert the SIM cardÑ see page 4 . 2. Attach the batteryÑ see page 5 . 3. Turn on your i 2000Ñ see page 6 . 4. Optional: Enter a PIN for your SIM cardÑ see page 7 . NOTE ¥ Some features of your i 2000 are available only in the iDEN service area, and are indicated as such in this guide.¥ This guide describes the features of the i 2000 as they were set up by Motorola. However, your carrier or your organization may have changed or added features. For more information, check with your carrier or your organization.C

2 i2000 UserÕs Guide Features of Your i 2000 NOTE Before you use your i 2000 for the Þrst time, remove the plastic lens protector from the display.1. Antenna12. Option Keys8. On/Off Key 16. Speaker Key 4. Push-To-Talk (PTT) Button3. Volume Control Buttons15. Alphanumeric Keypad6. Mode Key7. LED14. Menu Key2. Earpiece11. Alphanumeric Display5. Scroll Key13. Send/End Key10. Microphone17. Accessory Connector9. Vibe-all Key

3 Getting Started 1. Antenna Extend for optimal signal. 2 . Earpiece Listen to calls when the speakerphone is off. 3 . Volume Control ButtonsPress to adjust volume levels in Phone, Private, and Group modes. In mail menus, press to scroll forward and backward. 4 . Push-To-Talk (PTT) ButtonTransmit a Private or Group Call, or aCall Alert ª . Press and hold to talk; release to listen. (iDEN use only) 5 . Scroll Key Press the left side to scroll backward or the right side to scroll forward through menu options and lists. When entering text, press to erase text or add a space. 6 . Mode Key Press to change modes. (iDEN use only) 7 . LED (Light Emitting Diode) Check the phoneÕs status. See Table 1 on page 6 for more information. 8 . On/Off Button Press and hold to turn your i 2000 on or off. 9 . Vibe-All Key Press to silence or turn on the ringer tone. 1 0 . Microphone Use to speak during calls.11. Alphanumeric DisplayView up to four lines (up to 12 characters per line) or six lines (up to 16 characters per line) on the display.12. Option Keys Press the right or left option key to select the menu option that appears directly above the key. 13. Send/End Key Press to answer an incoming Phone call. After entering a phone number, press to dial the call or to redial the entered phone number. Press to end Phone calls.14. Menu Key Press to scroll through menu options.15. Alphanumeric KeypadEnter telephone numbers, Private Call IDs, and alphanumeric characters. 16. Speaker Key Press to switch between the earpiece and speaker during Private and Group calls. (iDEN use only) 17. Accessory ConnectorUse to connect accessories or the battery charger.

4 i2000 UserÕs Guide Inserting the SIM Card The SIM card contains all your stored names, numbers, and PINs after you enter them in your i 2000. You can make a phone call only when the SIM card is properly placed in the phone. Important! Insert and remove your SIM card with care so that you do not lose it. To insert the SIM card: 1. If your i 2000 is on, press and hold the On/Off button until you see the message ÒPowering OffÓ. 2. If the battery is attached, remove it. For information, see ÒDetaching the BatteryÓ on page 5. 3. Turn the phone over so that the antenna is at the upper left corner. 4. Slide the latch to the left position and open the SIM card holder. 5. If you have a full-size SIM card, gently punch out the mini SIM card. 6. Position the cut corner of the SIM card as illustrated and slide the card into the holder. 7. Close the card holder andslide the latch to the right. 8. Now, you can attach the battery. See ÒAttaching the BatteryÓ on page 5. NOTE Depending on the network that you are on, you may be able to make an emergency call without a SIM card.LatchLatchSIM cardholderSIMcard

5 Getting Started Charging and Attaching the Battery Remove the battery from the protective case provided in the original packaging. When the battery is not attached to the phone or being charged, store it in this case. Charging the Battery Attach the charger connector to the i 2000, then ßip open the prongs and plug the charger into an electrical outlet. For more information about chargers, see ÒTravel ChargerÓ on page 57, ÒVehicular Battery ChargerÓ on page 58, and ÒDesktop Dual-Pocket ChargerÓ on page 59. Attaching the Battery To attach the battery to your i 2000, align the battery as shown. Press down on the battery until you hear a click. Battery and Charging Status A low battery is indicated by a short, chirp-like sound through the speaker. The battery strength icon shows the remaining charge in the battery. Three bars indicate full charge. When you have less than Þve minutes of talk time remaining, the indicator ßashes. Figure 1. Battery Charging Status Detaching the Battery To detach the battery, press the latch to release the battery and slide the battery downward. NOTE Before you use the battery for the Þrst time, charge it for at least three hours. IconFlashes Charging Low Battery 0-30% 31-60% 61-90% 91-100%Discharging Low Battery 0-10% 11-40% 41-70% 71-100% NOTE Before removing the battery, make sure the phone is turned Off.Latch

6 i2000 UserÕs Guide Turning On Your i 2000 Press the On/Off button until a set of icons appears on your display. (For a description of the icons, see page 7.) Then a message, such as ÒPlease WaitÓ, displays while the i 2000 connects to your carrierÕs network. First Screen Second Screen Third Screen The second line of text on the Phone Ready screen displays the System Name, which is the name of the network providing service in the iDEN or GSM service area.If your Home carrier is an iDEN carrier, then when you are in an iDEN service area, the third line displays the local time and date. When you are in the GSM service area, the third line displays the name of your Home carrier.The LED indicator located on top of the i 2000 shows the service state. See Table 1 . Table 1: Status LIght (LED) Indicator Turning Off Your i 2000 Press and hold the On/Off button until you see the message ÒPowering OffÓ. LED Indicator Status of Your i 2000 Flashing Red RegisteringÑyour i 2000 is signing on to your carrierÕs network. Please wait.Solid Red No serviceÑyour i 2000 cannot sign on. It will continue trying to connect every two minutes as long as it is turned on.Flashing Green In serviceÑyour i 2000 is ready to use.You can now place and receive calls. Solid Green In useÑ-your i 2000 is currently being used. Check to make sure that you ended the last call by pressing .(Your Carrier(888)555-1212Message) Please WaitConnecting

7 Getting Started Light Sensor On your i2000, when a key is pressed, the light sensor will activate the backlight only when your phone is in poor lighting conditions. If illumination is needed, even when the backlight is disabled, you can manually override the sensor by pressing and holding the MENU key. This will activate the backlight. In a charger, the backlight will always be illuminated. SIM Card PIN To prevent unauthorized use of your phone, you may set a SIM card PIN. After the PIN is set, each time the i 2000 is turned on, a PIN must be entered. After you set a pin, you can later change or disable it.If your i 2000 requires a SIM PIN, follow the steps in ÒEntering the PINÓ on page 7.If your i 2000 does not require a PIN and you wish to set one, follow the steps in ÒEnabling the PIN RequirementÓ on page 9. Entering the PIN 1. Enter your PIN. As you enter it, an asterisk appears for each character. This prevents others from seeing your PIN. If you enter an incorrect PIN, the message, ÒWrong PINÓ appears. After three incorrect attempts, even if you turn off the phone and turn it on again, the SIM card PIN is blocked. If this happens,see "Unblocking the PIN", below. 2. Select ÒOKÓ. Now you are ready to place calls or check your mail.You can disable the PIN entry requirement. For more information, see ÒDisabling the PIN RequirementÓ on page 9. NOTE As you enter PIN and PUK (pin unblock) numbers, remember that pressing and holding the 9 key dials the emergency number. NOTE The Time and Date will not appear on your display when operating in GSM phone networks. Enter****Cancl OKSIM PIN Phone Ready(System Name)Name Mail 2:12p 07/21

8 i2000 UserÕs Guide Unblocking the PINIf you forget your PIN and try, unsuccessfully, to enter it three times, access to your i2000 with that SIM will be blocked. To gain access, you must Þrst unblock the PIN.To unblock the PIN: 1. Call your carrier for your PUK (PIN unblock code). 2. At the ÒEnter PUKÓ screen, enter your PIN Unblocking Key (PUK). As you enter it, an asterisk appears for each character. This prevents others from seeing your PUK. 3. Select ÒOKÓ. 4. At the ÒNew PINÓ screen, enter a new PIN. 5. Select ÒOK. 6. At the ÒRepeat New PINÓ screen, enter the new PIN again. 7. Select ÒOKÓ. After the system validates your new PIN, your phone is ready for normal use.Changing the PINTo change your SIM card PIN: 1. From the Phone Ready screen, press until you see the ÒPrgmÓ menu option. 2. Select ÒPrgmÓ. 3. Press , 4. Select ÒOKÓ. At the ÒChange PIN?Ó screen, select ÒOKÓ. 5. At the ÒOld PINÓ screen, enter your current PIN then select ÒOKÓ.NOTE If you unsuccessfully enter the PUK number ten times, the PUK is blocked. If this happens, you will get a message to call your service provider. You may, however, make emergency calls. Name MailPIN BlockedCall Your Provider Enter PUK **_______Cancl OK New PIN **_______Cancl OK 46=Change SIM PINsExit OK

9 Getting Started 6. At the ÒNew PINÓ screen, enter your new PIN then select ÒOKÓ. 7. At the ÒRepeat New PINÓ screen, enter your new PIN again then select ÒOKÓ.Disabling the PIN RequirementImportant! If you disable the PIN requirement, you remove protection of the personal data on your SIM card each time your i2000 is turned on. Anyone can then use your phone and your personal data. 1. From the Phone Ready screen, press until you see the ÒPrgmÓ menu option. 2. Select ÒPrgmÓ. 3. Press , . The Ò47=Require SIM PIN:OnÓ screen displays, indicating that the PIN requirement is set. 4. Select ÒOffÓ. 5. Enter your SIM PIN (your carrier provides the initial SIM Card PIN). 6. Select ÒOkÓ. 7. Select ÒExitÓ.Enabling the PIN Requirement 1. From the Phone Ready screen, press until you see the ÒPrgmÓ menu option. 2. Select ÒPrgmÓ. 3. Press , . The 47=Require SIM PIN:OffÓ screen displays, indicating that the PIN requirement is off. 4. Select ÒOnÓ. 5. Enter your SIM PIN (your carrier provides the initial SIM Card PIN). 6. Select ÒOkÓ. 7. Select ÒExitÓ. New PIN ****Cancl OK 47=Require Exit OffSIM PIN:On 47=Require SIM PIN:OffExit On

10 i2000 UserÕs Guide When the PIN is enabled, you are prompted to enter your PIN each time you turn on your i2000 . Until a valid PIN is entered, you can use the phone only to enter the emergency number. After the PIN is accepted, the Phone Ready screen displays. NOTE Important! Incorrectly entering your PIN three times causes the phone to be blocked. To unblock your phone, you must contact your carrier.EnterSIM PIN

11 Getting StartedDisplay IconsDisplay icons appear on the screen to inform you of existing conditions. See the following list.The following icons may appear along the top of the display.Signal Strength IndicatorShows the signal strength. Six bars indicate the strongest signal. Calls and messages may not be sent or received in weak signal areas.Battery Strength IndicatorShows the remaining charge in your battery. Three bars show full charge. The indicator ßashes when you have less than Þve minutes of talk time remaining.Voice MailIndicates that unplayed messages are waiting in your voice mail box.New Message MailIndicates that you have new text messages in your mail box.Unread Message MailIndicates that you have unread Message Mail.Vibrate AllIndicates that the Vibrate All option is turned on. You will not hear a ring tone. Call ForwardIndicates that incoming phone calls are being forwarded.Active Line Indication Displays the active phone line (1 or 2). Private/Group Mode SpeakerIndicates that the Private/Group speaker is off. You will hear calls through the earpiece.

12 i2000 UserÕs Guide About Modes and Menus Modes and menus are the navigational tools, providing access to the various features of your i2000. Pressing the Mode key takes you through the mode choices. Pressing the Menu key takes you through the menu options within each mode.There are four modes: ¥ PhoneÐFor cellular phone calls. See page 15. ¥ PrivateÐfor one-to-one radio calls. See page 36.¥ GroupÐFor radio calls with all individuals in a designated talkgroup. See page 44. To change modes:Press until you see the desired mode.To select menu options:Press until you see the desired menu option, then press under the desired menu option to select it.Setting the Time and Date If your carrier provides this option, you can set your phone to display the current time and date. Unless the phone is turned off, it continues to display the current time during a loss of service. You have a choice of a 12- or a 24-hour clock format. See Table 2.NOTE When this feature is activated, your phone automatically displays local time.Table 2: Time Display Options12-Hour Display 24-Hour Display 12:00a 00:00 6:25a 06:25 12:00p 12:00 6:25p 18:25odeModeM

13 Getting StartedYou have a choice of either a MM/DD (month/day) or a DD/MM (day/month) date format. See Table 3.If your carrier activates the time and date, they are displayed on the third line in all modes (Phone, Private, and Group). The time of day is also shown during an active Phone call. The time and date are not displayed in Group mode when you select an Area option.To set the time and date format: 1. From the Phone Ready screen, press until you see the ÒPrgmÓ menu option. 2. Select ÒPrgmÓ 3. Press , . 4. Select ÒOkÓ. The Time/Date screen displays.The default (preset) time and date format that displays depends on your carrier. You can accept the default format or select an alternate format. 5. Press until you see the Time Format screen. 6. Do one of the following: ¥ To use the 12-hour format, go to the next step. ¥ To use the 24-hour format, select Ò24hrÓ. See Table 2 on page 12. Table 3: Date Display OptionsDateMonth/Day Format(MM/DD)Day/Month Format (DD/MM)January 2nd 01/02 02/01January 31st 01/31 31/01October 9th 10/09 09/10December 31st 12/31 31/1271=Time/Exit OkDateTime/DateDisplay:OnExit OffTime Format:12 HourExit 24hr

14 i2000 UserÕs Guide 7. Press until you see the Date Format screen. 8. Do one of the following: ¥ To use the MM/DD format, select ÒExitÓ. ¥ Or to use the DD/MM format, select ÒDD/MMÓ. See Table 3 on page 13. 9. Select ÒExitÓ. The Ready screen for each mode (Phone, Group, and Private) now displays the selected time and date formats.Changing the Display LanguageYou can customize your i2000 to display one of four languages: English, French, Spanish, or Portuguese. You can manually select one of these languages or have your SIM select it for you (Automatic).To change the displayed language: 1. From the Phone Ready screen, press until you see the ÒPrgmÓ menu option. 2. Select ÒPrgmÓ 3. Press , . 4. Select ÒOkÓ. 5. Press to scroll through the language options. Selecting ÒExitÓ at any time retains the current language selection. 6. When the desired language appears on your display, select ÒOkÓ. The displayed text immediately changes to the selected language. 7. Select ÒExitÓ. The language that you select will be the displayed language. Exit DD/MMMM/DDDate Format: 70=LanguageAutomatic Exit Ok70=LanguageEnglish OkCancl70=LanguageFrancais OkCancl

15 Making Phone CallsMAKING PHONE CALLSIn addition to making and receiving phone calls in Phone mode, you can use the speakerphone, set vibration alerts, forward calls, use call waiting, put calls on hold, use three-way calling, and create and use stored lists. Phone Ready is the main screen. You can also have an optional, alternate line on your i2000. Your alternate line will have its own unique number so that you can designate special use for each line.You can place a call by entering the phone number on the keypad. 1. From the ÒPhone ReadyÓ screen, using the keypad, enter the desired number.If you make a mistake, press once to move back one digit, or select ÒCanclÓ to start over. 2. Press to place the call. 3. To end the call, press .International Phone CallsTo make an international phone call, press and hold . After about two seconds, the international dialing preÞx + appears in the display. This allows you to call from any country without knowing the local international access code.Inserting Pauses into Phone NumbersTo add a three-second pause character to a phone number, press and hold for about two seconds. The pause symbol (P) will appear.Using Other Dialing MethodsTo use Scroll, Speed Dial, or Name Search, names and numbers must be programmed in your phone. See ÒCreating, Editing, and Using Stored ListsÓ on page 30.Scroll 1. From the Phone Ready screen, press to scroll backward or forward through your stored list of numbers and names. 2. Press to place the call. 3. To end the call, press . Phone Ready3:15p 08/21Name Mail(System Name)

16 i2000 UserÕs Guide Speed Dial 1. From the Phone Ready screen, press until you see the ÒSpd#Ó option on the last line of your display. 2. Select ÒSpd#Ó. 3. Enter the assigned speed-dial number (1-100). You will see the stored name and phone number associated with the speed-dial number. 4. Press to place the call. 5. To end the call, press .Name Search 1. From the Phone Ready screen, select ÒNameÓ. 2. Using the keypad, enter the Þrst letter of the desired name, for example, to search for the name Bob: a. Enter ÒBÓ by pressing twice.b. Press to scroll through all the names starting with ÒBÓ until you see ÒBobÓ. 3. Press to place the call. 4. To end the call, press .Last Number RedialTo redial the last number that you called, press .Turbo Dial¨Turbo Dial enables you to quickly place a phone call by simply pressing and holding the numeric key on the keypad that corresponds to the stored entry in your Phone list directory. There are eight Turbo Dial positions, 1 through 8. From the Phone Ready screen: 1. Select one of the Þrst eight entries in the Phone list using key numbers 1 through 8. For example, press for speed dial #1. Keypad numbers 0 and 9 are not available for Turbo Dialing.NOTE If you are on a Phone call, place the call on hold before using Turbo Dial.Phone Ready1Cancl

17 Making Phone Calls 2. Press and hold the desired key for two seconds to activate Turbo Dial. The phone begins to dial the number and ÒPhone ReadyÓ changes to ÒPhone-In UseÓ.Automatic RedialIf you receive a ÒSystem Busy, Try LaterÓ message, press to have your phone automatically redial the number. You will hear a ring-back tone when the call is successful.Emergency DialYou can dial the emergency phone number even if the keypad is locked. You can make the call regardless of any security codes and, depending on the network, with or without a SIM card inserted. If you are on an active call, you must end it before using the emergency number. 1. From any mode (Phone, Private, or Group), press and hold for two seconds until the phone displays ÒEMERGENCYÓ. The phone then automatically dials the emergency number. 2. To end the call, press . The emergency phone number will not be saved as the last number dialed.Hands-Free SpeakerphoneThe i2000 provides the convenience of a speakerphone for holding impromptu meetings or listening to your voice mail messages. During speakerphone operation, you may either speak or listen, but you cannot do both at the same time.To use the speakerphone: 1. Select ÒSpkrÓ. The ÒSpkrÓ option ßashes while the speakerphone is on. 2. Place the phone 15-30 inches (380-760 millimeters) away from you. In a noisy environment, you may want to move the i2000 closer to you for better transmission.NOTE For more information on the Emergency Dial feature, contact your carrier.Phone-In UseVoice Mail 3Way Spkr12:45p 10/18

18 i2000 UserÕs Guide Receiving a Phone Call 1. Press or press any numeric key (0 through 9). 2. To activate the speakerphone, select ÒSpkrÓ. 3. To end the call, press .Missed Call Indicator Your i2000 notiÞes you of received, but unanswered phone calls. If you subscribe to Caller ID, the callerÕs phone number is stored in your Last 10 Calls Received list. Your screen displays a ßashing message, for example, Ò2 Rcvd CallsÓ, with the number of missed calls. Press any key to clear the ßashing indicator.To retrieve the missed calls: 1. From the Phone Ready screen, press . The menu options change to ÒCallsÓ and ÒSpd#Ó.NOTE If there is background noise in your area, you may have difÞculty hearing a callerÕs voice or messages. To resolve this problem: 1. Press until you see the ÒMuteÓ menu option. 2. To listen, press under ÒMuteÓ. The display changes from ÒPhone In UseÓ to ÒPhone MuteÓ, indicating that the microphone is muted. 3. To speak, press under ÒMuteÓ again. The display changes from ÒPhone MuteÓ to ÒPhone In UseÓ, indicating that the microphone is on.While the microphone is muted, you can hear incoming audio, but a caller cannot hear any speech coming from your i2000. odeMIncoming Phone Call SpkrEndPhone Ready(System Name) MailName2 Rcvd CallsPhone Ready (System Name)Spd#Calls10:42a 11/06

19 Making Phone Calls 2. Select ÒCallsÓ. The Rcvd Calls screen opens with the number, time, and date of the last call that you received. 3. Scroll to continue viewing the list.What Is My Phone Number?From the Phone Ready screen, press until you see the ÒPrgmÓ menu option.Select ÒPrgmÓ.Press to display your own phone number. VibraCallªVibraCall is a vibration alert system that notiÞes you of incoming Messages, Phone, Private, and Group calls. You can set a vibration alert for all services or for individual services. The alert choices are: ¥ Vibe AllÑproduces a vibration alert for all incoming calls and messages.¥ Phone VibrateÑproduces a vibration alert for incoming phone calls.¥ Phone Vibrate/RingÑproduces a vibration alert followed by a ring tone for phone calls.¥ Mail VibeÑproduces a vibration alert for mail messages.¥ Group/Prvt VibeÑproduces a vibration alert for incoming group and private calls. NOTES When you set vibration alerts, they are set only for the current line.If you have a second phone line, you must select that line and repeat the procedure for selecting all services or selecting individual services to vibrate.NOTE If VibraCall is set for incoming calls and messages, the power-up sequence includes a brief vibrate cycle.Rcvd Calls1=555222210:42a 11/06Cancl Store1=Own Ph#9545553434 Exit Edit

20 i2000 UserÕs Guide Selecting VibraCall for All Incoming Calls and MessagesTo set a vibration alert for all incoming calls and messages: 1. Press once and a ÒVibeAll: OnÓ message displays brießy. 2. Select ÒAllÓ. You will receive a brief vibration alert.After you set the alert, the display returns to the previous mode and (the Vibrate All icon) appears at the top of your display.Selecting VibraCall for Individual ServicesTo set a vibration alert for speciÞc phone or mail services: 1. From the Phone Ready screen, press until you see the ÒPrgmÓ menu option. 2. Select ÒPrgmÓ 1. Press . 2. Press until you see the ÒSelctÓ menu option. 3. Select ÒSelctÓ. The Þrst choice is Phone Vibrate. 4. To view the Vibe/Ring vibration alert choices, press on the keypad. 5. To view other choices, press . ¥ To receive vibration alerts only for Mail, select ÒMail VibeÓ, then select ÒOnÓ. ¥ To receive vibration alerts for Group and Private calls, select ÒGroup/PrvtÓ, then select ÒOnÓ.Exit All Phone Ready(System Name)10:54p 12/09 10:54p 12/09(System Name)Phone ReadyName Mail9=VibrateAlert:OffExit All Alert:OffSelct9=VibrateVibrate:Vibrate OffExit Vibe Phone:

21 Making Phone Calls 6. Select ÒExitÓ to return to the Vibrate Alert menu. 7. Select ÒExitÓ again to return to the previous mode. Keypad LockOn your i2000 you may lock your keypad in Phone Mode so inadvertent key presses will not result in digits being dialed or a phone call being placed. When in Phone Mode, pressing and simultaneously will activate the Keypad Lock. While the keypad is locked, the only keys that may be pressed are the Power Key, to turn off your phone, or the and keys together to turn off the keypad lock. The keypad lock will be automatically disabled if the i2000 receives a Phone, Private, or Group call. At the end of the call, the keypad lock will be automatically re-activated.Setting the Ringer VolumeYou can adjust the ringer volume for incoming calls. If you have a second phone line, you must set each line separately. Be sure to select the desired line before setting the volume. 1. From the Phone Ready screen, press until you see the ÒPrgmÓ menu option. 2. Select ÒPrgmÓ 3. Press , . The Ò30=Ringer VolumeÓ screen displays.The display shows your current ringer volume. 4. Press the Volume Control buttons on the side of the phone to listen as you raise or lower the volume. At the lowest setting, the screen displays ÒVolume SilentÓ. 5. When you reach the desired level, select ÒExitÓ. Selecting a Ring StyleYour phone has nine selectable ring styles. Phones with two phone lines can use the same or different ring styles for each phone line. NOTE: Emergency Calls cannot be placed while the keypad lock is active.Group/PrvtVibe:Off Exit On Exit 30=RingerVolume

22 i2000 UserÕs Guide Setting a Ring Style 1. From the Phone Ready screen, press until you see the ÒPrgmÓ menu option. 2. Select ÒPrgmÓ 1. Press , . The display shows your current ring style. 2. Select ÒOkÓ. 3. Press to scroll through the available Ring Styles. 4. To listen to the selected ring style, press the Volume buttons on the side of the phone. 5. Select ÒOkÓ to select the Ring Style shown. To leave the ring style unchanged, select ÒCanclÓ 6. Select ÒExitÓ.Setting a Ring Style for the Alternate Line 1. From the Phone Ready screen, press until you see ÒLine2Ó. 2. Select ÒLine2Ó. 3. Repeat the procedure for "Setting a Ring Style", above.Call ForwardingCall forwarding lets callers reach you by forwarding incoming calls to a designated number. You have two options: forward all incoming calls (unconditional) or select those circumstances (conditional) when you want your calls forwarded. Unconditional Call ForwardingUnconditional call forwarding sends all incoming calls to the designated number. NOTE When you set unconditional call forwarding, your phone does not ring.31=Set RingStyle:1 OkExitRing Style 4 Ok Cancl

23 Making Phone Calls 1. From the Phone Ready screen, press until you see ÒForwdÓ on the last line of the display. 2. Select ÒForwdÓ. 3. To select the number where you want your calls forwarded, do one of the following: ¥ Enter a number. ¥ Or, press the scroll keys to select a number from your stored list. 4. Select ÒOnÓ. 5. After the ÒPlease WaitÓ message displays, select ÒExitÓ.Notice that the Call Forward icon appears on your display when Unconditional Call Forwarding is set. Conditional Call ForwardingYou may want to forward your calls when your i2000 is: ¥ Busy on another call ¥ Not answered (NoAns) ¥ Outside the service area (NoRch). 1. From the Phone Ready screen, press until you see ÒForwdÓ on the last line of your display, then select it. 2. Press once again until you see ÒBusyÓ and ÒNoAnsÓ on the last line of your display. ¥ To forward your calls when your phone is in use, select ÒBusyÓ. ¥ To forward your calls when you do not want to answerthem, select ÒNoAnsÓ.NOTE You must turn off Unconditional Call Forwarding before you can set Conditional Call Forwarding options.Phone Ready(System Name)Forwd Memo 9:06a 09/03 Forwd:OffTo:5551212Exit OnPhone Ready(System Name)Forwd Memo 9:06a 09/03Forward:OffTo:Busy NoAns

24 i2000 UserÕs Guide 3. Press again until you see ÒNoRchÓ and ÒRcl#Ó. ¥ To forward your calls when you cannot be reached, select ÒNoRchÓ. ¥ To see the call forward number, select ÒRcl#Ó. 4. After you select the call forward option, either enter the number where you want your calls to be forwarded, or press the scroll buttons and select a number. 5. Select ÒOnÓ. 6. Select ÒExitÓ.You can set more than one condition by repeating steps 2 through 6.Call WaitingUsing the Call Waiting feature, you can answer an incoming call when you are on another call. Call Waiting is on unless you turn it off for a particular call. 1. After the alert tone, your display shows the incoming number and asks ÒAccept Call?Ó (if you have Caller ID). To accept the call, select ÒYesÓ. To decline the call, select ÒNoÓ. 2. Press , then select ÒHoldÓ to place the second call on hold and return to the Þrst call. Selecting ÒHoldÓ switches you between the two calls. 3. To end the active call, press . Call HoldWhen you are on a call, you can place the call on hold and make a second call. 1. To place the active call on hold, press , then select ÒHoldÓ. You may then answer or place another call. 2. To remove the call from hold, press , then select ÒHoldÓ again.The options Ò3wayÓ and ÒSpkrÓ appear only when you are on an active call.Forward:OffTo:NoRch Rcl# odeM5551212 No Yes Accept Call?Call 1-Hold5551212SHold Spkr

25 Making Phone Calls3-Way CallingIf your carrier provides 3-way calling, you can combine two ongoing phone calls into one conversation. This option is available only when you initiate the second call.After you place or receive a phone call: 1. Select Ò3wayÓ. This action places the current call on hold. 2. Enter the phone number for the second call and press . 3. When the second call is connected, select Ò3wayÓ to join the calls. Both phone numbers and Ò3wayÓ appear on your screen. 4. To end the 3-way call, press .Call BarringIf your carrier provides Call Barring, you can prevent incoming and outgoing calls on your i2000. Press to view the call barring choices (incoming, outgoing, and recall status). See the following procedures for each.Barring Incoming CallsYou can choose to bar:¥ When RoamingÑblocks all incoming calls while you roam away from your home system.¥ All CallsÑblocks all incoming calls.Press the to view the incoming call barring choices. See the following procedure. 1. From the Phone Ready screen, press until you see the ÒBarÓ menu option.The time, date, and menu option, ÒLine2Ó, do not appear in GSM. 2. Select ÒBarÓ. The ÒCall Barring IncomingÓ screen displays.Phone-In Use555121211:40p 05/08Hold 3way Phone ReadyBar Line2(System Name) 2:12p 09/03Call BarringExit OKIncoming

26 i2000 UserÕs Guide 3. Select ÒOkÓ. The ÒBar Incoming:OffÓ screen displays. 4. Do one of the following: ¥ To leave the incoming call barring as shown (in this example, off), select ÒExitÓ. ¥ Or, to bar all incoming calls, select ÒAllÓ. At this point, you are requiredto enter your passcode. 5. Enter your call barring passcode and select ÒOKÓ. Barring Outgoing Calls You can choose to bar:¥ International CallsÑblocks all outgoing international calls.¥ International Calls except Home CountryÑblocks all outgoing international calls except to your home country.¥ All CallsÑblocks all outgoing calls. Press to view the outgoing call barring choices. See the following procedure. 1. From the Phone Ready screen, press until you see the ÒBarÓ menu option. The time, date, and menu option, ÒLine2Ó, do not appear in GSM. 2. Select ÒBarÓ. The ÒCall Barring IncomingÓ screen displays. 3. Press once. The ÒCall Barring OutgoingÓ screen displays. 4. Select ÒOkÓ. The ÒBar Outgoing:OffÓ screen displays. 5. Do one of the following: ¥ To leave the outgoing call barring as shown (in this example, off), select ÒExitÓ.BarExit AllIncoming:Off Enter Bar Cancl OKPasscode****Phone ReadyBar Line2(System Name) 2:12p 09/03Call BarringExit OKOutgoingBarExit AllOutgoing:Off

27 Making Phone Calls ¥ Or, to bar all incoming calls, select ÒAllÓ. At this point, you are requiredto enter your call baring passcode and select ÒOKÓ. 6. To access the ÒIntlÓ menu option, press . 7. Do one of the following: ¥ Select ÒAllÓ to bar all outgoing international calls. ¥ Or, press again to select ÒxHomeÓ to bar all outgoing calls except to your home country. Viewing Call Barring Status To view the Call Barring status: 1. From the Phone Ready screen, press until you see the ÒBarÓ menu option. The time, date, and menu option, ÒLine2Ó, do not appear in GSM. 2. Select ÒBarÓ. The ÒCall Barring IncomingÓ screen displays. 3. Press . The ÒCall Barring OutgoingÓ screen displays. 4. Press again. The ÒCall Barring Recall StatusÓ screen displays. 5. Select ÒOKÓ. At this point, you are required to enter your passcode then select ÒOKÓ. Next, the ÒPlease WaitÓ message displays. If you enter the wrong passcode, the ÒWrong Bar PasscodeÓ message displays then the ÒEnter Bar PasscodeÓ screen displays again. Carefully re-enter your passcode. It must be between 4 and 8 digits. 6. After the ÒPlease WaitÓ message, the ÒCall Bar Incoming:OffÓ screen displays. Do one of the following: ¥ To view only the Call Bar Incoming status, select ÒOKÓ. ¥ To view the Call Bar Outgoing status, press , then select ÒOKÓ. Enter BarPasscodeCancl OK *****Phone ReadyBar Line2(System Name) 2:12p 09/03Call BarringExit OKRecallStatus Enter BarPasscodeCancl OK*****

28 i2000 UserÕs Guide Changing Your Call Barring Passcode To change your call barring passcode: 1. From the Phone Ready screen, press until you see the ÒPrgmÓ menu option. The time, date, and menu option, ÒLine2Ó, do not appear in GSM. 2. Press , . The Ò48=Change Bar PasscodeÓ screen displays. 3. Select ÒOKÓ. The ÒOld Code?Ó screen displays. 4. Enter your current passcode then select ÒOKÓ. The ÒNew Code?Ó screen displays. 5. Enter your new passcode then select ÒOKÓ. 6. At the ÒRepeat CodeÓ screen, enter your new passcode again then select ÒOKÓ. Be sure to record your new passcode and store it in a safe place. Alternate Phone Line ( i DEN Only) If your phone is activated with two phone lines, you can switch between them. To change phone lines, your phone must be at the Phone Ready screen. The following settings are independent for each phone line. When you enable a setting, it applies only to the active line. ¥ Ringer Volume ¥ Auto Answer ¥ One-minute Beep ¥ Automatic Display Timer ¥ Resettable Timer ¥ Total Call Timer ¥ Selectable Ring Styles ¥ Call Forwarding Setting the Active Line At the ÒPhone ReadyÓ screen: 1. Press until you see ÒLine2Ó. (If you are on Line 2, you will see ÒLine1Ó.) 2. Do one of the following: ¥ Select ÒLine2Ó to activate Line 2 when Line 1 is the active line. 48=ChangeBar PasscodeExit OKPhone Ready(System Name)Line2 11:48p 08/21

29 Making Phone Calls ¥ Or, select ÒLine1Ó to activate Line 1 when Line 2 is the active line. Outgoing calls will be made on the selected line. Receiving a Call You can receive calls on either line, regardless of the active line setting.¥ If you receive a call on the currently active line, that icon simply ßashes.¥ If you receive a call on the line that is not currently active, the active line icon remains lit and the alternate line icon ßashes. Receiving a Call on Your Alternate Line 1. Select ÒYesÓ to answer the call on the other line. Your previous call will be placed on hold. 2. Do one of the following: ¥ To end the call, press . ¥ Or, to place the current call on hold, or to toggle between calls, press , then select ÒHoldÓ.When the call ends, the phone remains active in the last active line selected. Phone Only Mode ( i DEN Only) If your carrier provides this option, you can turn off Private and Group services. You can still make and receive phone calls and receive Message Mail. Placing the phone in Phone Only mode increases the standby battery life. Make sure that the LED is blinking green, which indicates that you are in a coverage area. To turn on Phone Only mode: 1. From the Phone Ready screen, press until you see the ÒPrgmÓ menu option. 2. Select ÒPrgmÓ 1. Press , . 2. Select ÒOnÓ.3055551212Accept CallOn Line 2? No Yes12 80=PhoneOnly:Off On Exit

30 i2000 UserÕs Guide 3. Select ÒExitÓ.The ÒPhone ONLYÓ message displays. Group call and Private call services are now suspended.To restore all services: 1. From the Phone Ready screen, press until you see the ÒPrgmÓ menu option. 2. Select ÒPrgmÓ 3. Press , 4. Select ÒOffÓ. 5. Select ÒExitÓ. The display returns to Phone Ready. All services are now available. Creating, Editing, and Using Stored Lists A stored list is a directory of phone numbers and Private IDs and their related names. Stored lists are convenient because you do not have to remember names and numbersÑyou simply scroll through your stored list. Combined Phone Number and Private ID List You can set a combined Phone and a Private ID with the associated name, which eliminates the need to program the Private ID separately. You can add up to 100 numbers to your Phone list, store them with names, and assign them to speed-dial numbers. Entering Numbers To enter a number, press the corresponding key on the keypad. 80=PhoneOnly:OnExit Off Phone ONLY 2:12p 07/21Name Mail(System Name)80=PhoneOnly:OnExit Off 80=PhoneOnly:OffExit On

31 Making Phone Calls Entering International Phone Numbers To enter an international phone number, press and hold . After about two seconds, the international dealing preÞx + will appear in the display. This allows you to call from any country without knowing the local international access code. Inserting Pauses into Phone Numbers To obtain a three-second pause character in a phone number, press and hold for about two seconds. The pause symbol (P) will appear. Entering Names To enter a letter, press the key the required number of times, which is related to the letterÕs position on the key. Table 4 describes how to enter each letter on the key. Table 4: Entering Letters and Numbers on the Keypad To shift to lowercase letters, press and hold after a letter is entered. Storing Names and Numbers 1. Press until you see the ÒPrgmÓ menu selection. 1. Select ÒPrgmÓ. 2. Press , . 3. Select ÒOkÓ. To enter: Press P once .Q twice .R three times .S four times .7 Þve times .20=Phone/Prvt ListExit Ok

32 i2000 UserÕs Guide The next screen brießy displays the remaining number of phone numbers and private IDs that you can store. 4. Enter the name that you wish to store. 5. Select ÒStoreÓ. See Figure 2. for an example of entering a name. Figure 2. Entering a Name 5. Enter the phone number that you want to associate with this name and select ÒStoreÓ. To skip the Phone Number entry, select ÒSkipÓ. You will go directly to the ÒEnter Prvt ID NumberÓ screen. The next screen displays the name that you entered and a ßashing speed-dial number where the entry will be stored. 6. Do one of the following: ¥ To accept the speed-dial number shown, select ÒStoreÓ. ¥ To change the speed-dial number, enter the desired speed-dial number. The speed-dial number stops ßashing. 7. At the next screen, enter the Private ID number associated with the name that you entered then select ÒStoreÓ. To skip the Private ID number entry, select ÒSkipÓ. EXAMPLE To store the name ÒTIMÓ: 1. Enter ÒTÓ by pressing once. 2. Enter ÒIÓ by pressing three times. 3. Enter ÒMÓ by pressing once. Available98 Phone #3 Prvt IDsEnter NameExit Store_Skip StoreEnter PhoneNumber_TIMSpd#=3 Cancl StoreEnter PrvtID Skip Store

33 Making Phone Calls Editing and Erasing Phone List Entries 1. Press until you see the ÒPrgmÓ menu selection. 2. Select ÒPrgmÓ. 3. Press , . 4. Select ÒOkÓ. The ÒEdit Entry?Ó screen displays. 5. Do one of the following:a. To edit an entry, select ÒOkÓ. (1) At the ÒEdit EntryÓ screen, press until the desired entry appears, then select ÒOK.(2) At the ÒEdit NumberÓ screen, edit the phone number, if you wish, then select ÒStoreÓ.(3) At the ÒEdit NameÓ screen, edit the name, if you wish, then select ÒStore.(4) At the ÒEdit Spd#Ó screen, edit the speed number, if you wish, then select ÒStoreÓ.b. To erase an entry:(1) At the ÒEdit EntryÓ screen, press . (2) At the ÒErase EntryÓ screen, select ÒOkÓ.(3) Scroll to the desired entry, then select ÒOkÓ. At the ÒErase Entry?Ó screen, select ÒYesÓ. 4. Select ÒExitÓ to close the Phone List Edit screen. Editing and Erasing Private ID List Entries 1. Press until you see the ÒPrgmÓ menu selection. 2. Select ÒPrgmÓ. 3. Press , . 4. Select ÒOkÓ. The ÒEdit Entry?Ó screen displays. 5. Do one of the following:a. To edit an entry, select ÒOkÓ. (1) At the ÒEdit EntryÓ screen, press until the desired entry appears, then select ÒOK.(2) At the ÒEdit IDÓ screen, edit the number, if you wish, then select ÒStoreÓ.(3) At the ÒEdit NameÓ screen, edit the name, if you wish, then select ÒStore.

34 i2000 UserÕs Guide b. To erase an entry at the ÒEdit EntryÓ screen, press once, then select ÒOkÓ. Press to scroll to the desired entry, then select ÒOkÓ. At the ÒErase Entry?Ó screen, select ÒYesÓ. 4. Select ÒExitÓ to close the Private ID List Edit screen. Last 10 Calls Received and Sent Lists If you subscribe to your carrierÕs Caller ID service, you can view, dial, and store the list of the last ten phone numbers received and the last ten phone numbers dialed. The most recent call sent or received appears Þrst in your call list.From the Phone Ready screen: 1. Press . The menu options change to ÒCallsÓ and ÒSpd#Ó. 2. Select ÒCallsÓ. The Rcvd Calls screen opens. If the ÒStoreÓ option appears, the number currently displayed is not in your Phone list. To add the number to your list, select ÒStoreÓ.If you want to see the Sent list but the ÒStoreÓ option is on your display, press until you see the ÒSentÓ menu option . 3. Do one of the following: ¥ To view the Calls Received list, use the Scroll key to view each entry. If the ÒStoreÓ option is on your display, press until you see the ÒRcvdÓ menu option. ¥ Or, to view the Calls Sent list, select ÒSentÓ. Use the Scroll key to view each entry. 4. To view the Calls Received list again, select ÒRcvdÓ. 5. To close the Calls list, select ÒCanclÓ. Quickstore of Phone Numbers If you subscribe to your carrierÕs Caller ID service, you can use Quickstore to store the last number that you dialed or quickly store a Phone Ready(System Name)Calls Spd#12:55p 10/18 Rcvd Calls1=5554444Cancl Store12:55p 10/18Cancl StoreRcvd Calls2=MAILBOXCancl Sent12:56p 10/18Sent Calls1=JOHNCancl Rcvd12:56p 10/18

35 Making Phone Calls number from the Last 10 Calls Received and Sent Lists without having to enter the programming menu.To use Phone Number Quickstore, from either the Phone Ready screen or from the Last 10 Calls Received or Sent List: 1. Do one of the following: ¥ To go to the last call that you dialed, press . ¥ To view the Received and Sent Calls list,press until you see ÒCallsÓ, then select it. 2. Select ÒStoreÓ. The Enter Name screen displays. 3. Enter the name then select ÒStoreÓ.The combined name and number entry is stored in the Þrst available storage space.The Stored message displays with the name that you stored. NOTE As you scroll through the Last 10 Received or Last 10 Sent Calls List, only the name displays. If the name is not available, the phone number displays.Phone Ready(System Name)Name Mail12:43p 11:35aPhone Ready0=5554455Cancl StoreEnter Name_Cancl StoreJOHN5551212Stored

36 i2000 UserÕs Guide TRAVELING BETWEEN SYSTEMSWhen you travel, you may have to change the phone system setting. You can choose from six phone system settings:¥ Last activeÑuseful when you move between iDEN and GSM systems that do not overlap, for example, traveling between New York and Paris. If your i2000 cannot locate the last system, for example, iDEN, it attempts to locate the other system, GSM. ¥ Roam allÑuseful when you are in an overlapping system-coverage area and have no preference for either system. This selection causes your i2000 to switch between iDEN and GSM until it Þnds an acceptable network.¥ iDEN preferredÑuseful if your home system is iDEN and you are in a country or region where GSM coverage is also available. Your i2000 always searches Þrst for iDEN networks.¥ iDEN onlyÑuseful when you are in an area that is covered by iDEN and GSM, but you want to use iDEN. Your i2000 attempts to register only on iDEN networks.¥ GSM preferredÑuseful if your home system is GSM and you are in a country or region where iDEN coverage is also available. Your i2000 always searches Þrst for GSM networks. ¥ GSM onlyÑuseful when you are in an area that is covered by iDEN and GSM, but you want to use GSM. Your i2000 attempts to register only on GSM networks.To reselect the phone system: 1. Press until you see the ÒPrgmÓ menu option. 2. Select ÒPrgmÓ. 3. Press , , then select ÒOKÓ. 4. Press until you see the desired system. 5. Select ÒOKÓ. Searching for a Network While you are on a GSM network, you can perform an automatic or manual search for available networks. A manual search allows you to view the available networks and make a selection rather than use the network automatically selected by the phone. 1. Press until you see the ÒPrgmÓ menu selection. 2. Select ÒPrgmÓ. 55=Phone SysExit OKiDEN PreferredPhone SystemCancl OKLast Active

37 Traveling between Systems 3. Press ,. 4. Select ÒOKÓ 5. At the Ò57=GSM Network SearchÓ screen, do one of the following:¥ Select ÒOKÓ.¥ Or, press . At ÒManual SearchÓ, select ÒOKÓ. Then press to scroll through the network choices. The network choicesappear in the following order: Home,Preferred, Available.Storing Your Preferred List of Networks While you are on a GSM network, you can add, edit, or erase your preferred list of networks. 1. Press until you see the ÒPrgmÓ menu selection. 2. Select ÒPrgmÓ. 3. Press ,. 4. Select ÒOKÓ. The ÒAdd New Entry?Ó screen displays. 5. At the ÒAdd New Entry?Ó screen, select ÒOKÓ. This selection opens a network screen. 6. Do one of the following: ¥ To add this network, select ÒOkÓ. ¥ Or, to exit this screen without adding this network, select ÒCanclÓ. ¥ Or, press to view or enter another available or known network. At the desired network screen, select ÒOKÓ.NOTE From the ÒAdd New Entry?Ó screen, you may press to go to the ÒEdit EntryÓ or ÒErase Entry?Ó screen. Press to view the network choices for each screen. 57=GSMExit OKNetwork Search58=GSMExit OKNetwork ListAdd NewCancl OKEntry?Cancl OK234 10 UKAvailable UK Cellnet

38 i2000 UserÕs Guide Selecting ÒOKÓ adds the displayed network to your preferred network list. 7. At the preferred network screen, for example, UK Cellnet Pref#=_, assign a number, 1 through 8, to the network name. The number that you assign provides the priority in which the phone looks for the systems when it is scanning the preferred list of networks. 8. Select "OKÓ. Storing New Networks to Your Known listWhile you are on a GSM network, you can add new network names and network codes to your known list This is useful if Nextel adds new roaming partners. 1. Press until you see the ÒPrgmÓ menu selection. 2. Press under ÒPrgmÓ. 3. Press ,. 4. Press under ÒOKÓ. The ÒAdd New Entry?Ó screen displays. NOTE You can assign numbers 1 through 8 to your preferred network names. However, if you assign a new network name to a number that already has a stored network name, you will erase the stored name.NOTE Once you have added one new network name and network code to your known list, you also have the option to edit or erase these names and codes.UK CellnetCancl OKPref#=_56=GSM Exit OKNetwork NameAdd New Cancl OKEntry?

39 Traveling between Systems 5. At the ÒAdd New Entry?Ó screen, press under ÒOKÓ. The ÒEnter CodeÓ screen appears. 6. Enter your Þve- or six-digit code. 7. Press under ÒStoreÓ. The ÒEnter NameÓ screen then appears. 8. Enter the network name. 9. Do one of the following: ¥ To add this network, press under ÒStoreÓ. ¥ Or, to exit this screen without adding this network, press under ÒCanclÓ. Selecting ÒStoreÓ adds the displayed network to your known network list.Enter CodeCancl OK_

40 i2000 UserÕs Guide MAKING PRIVATE CALLSA Private call is a one-to-one conversation between two people. In Private mode, each i2000 is identiÞed by a name or a number called a Private ID.To make a Private Call: 1. Press until you see ÒPrvt ReadyÓ on your display. 2. Use the keypad to enter the Private ID of the person that you want to reach. 3. To speak, press and hold the PTT button, wait for the chirp, then speak into the microphone. 4. To listen, release the PTT button.To use Scroll or Name Search, you must have a Private ID list.Scroll 1. Press until you see ÒPrvt ReadyÓ on your display. 2. Press to scroll through the stored Private ID list. 3. Press and hold the PTT button, wait for the chirp, then speak into the microphone.Name Search 1. Press until you see ÒPrvt ReadyÓ on your display. 2. Select ÒNameÓ. 3. Press the key with the Þrst letter of the name you are searching for. 4. Press to scroll through other stored names associated with the letter you entered. 5. Press and hold the PTT button, wait for the chirp, then speak into the microphone.Prvt ReadyJOHN SMITHAlert NameodeModeModeM

41 Making Private Calls Receiving a Private Call When you receive an incoming Private call, you hear a brief chirp-like tone. Your i 2000 automatically switches to Private mode, and the Private ID or the name of the caller displays. 1. Your phone must be idle, that is, not busy in an active call. 2. Wait for the caller to Þnish speaking. 3. Press and hold the PTT button. Begin speaking after you hear the chirp. Private/Group Mode Speaker You can hear Private calls through either the earpiece or the speaker. Press the Speaker button on your i 2000 to turn the Private/Group Mode Speaker on or off.¥ With the Speaker on, you will hear incoming calls through the speaker.¥ With the Speaker off, you will hear incoming calls through the earpiece. Call Alertª Call Alert enables you to page an individual by sending an audible tone. A Call Alert allows the individual to respond when it is convenient. The alert plays intermittently until the individual clears it. Sending a Call Alert 1. Press to go to the ÒPrvt ReadyÓ screen. 2. Select ÒAlertÓ. 3. Enter the Private ID, or press to scroll to the desired name. You may also select the name by pressing and using Name Search. 4. Press the PTT button.Prvt ReadyJOHNAlert NameodeMExit QueueJOHNAlert

42 i2000 UserÕs Guide Receiving a Call Alert When you receive a Call Alert, you will hear an alert tone and see a message on your display.¥ To answer the Call Alert, press the PTT button.¥ To clear the Call Alert without answering it, select ÒClearÓ.¥ To silence the Call Alert without clearing it, press any key other than the PTT button. Call Alert Queuing If your carrier provides Call Alert Queuing, you can save up to eight Call Alerts in a queue for later use.After you respond to the Call Alert, it is removed from the queue. Clearing or Queueing a Call Alert When you receive a Call Alert, do one of the following:¥ To clear a Call Alert, select ÒClearÓ.¥ To place the Call Alert into the queue, select ÒQueueÓ. Pressing also queues the Call Alert.If you receive multiple Call Alerts, the last received Call Alert displays and the remaining Call Alerts are stacked at the beginning of the queue. Responding to a Queued Call Alert You can respond to the Call Alerts in any order. To select a Call Alert for response: 1. Select ÒQueueÓ. 2. Press to scroll to the desired Call Alert. 3. Press the PTT button to respond to the Call Alert. Quickstore of Private IDs Quickstore allows you to quickly store a Private ID without having to enter the programming menu. NOTE Until the Call Alert is cleared or returned, the alert plays intermittently and you will not be able to receive any additional Phone, Private, or Group calls.Alert 3JOHN SMITH Clear QueueodeM

43 Making Private Calls From the Private Ready screen with the Private ID displayed: 1. Select ÒStoreÓ. If an ID is greater than 12 characters, the ID wraps to the third line, replacing the time and date. 2. Enter the name associated with the Private ID. 3. Select ÒStoreÓ. The Stored message displays. If the list is full with the maximum 100 names, you will get the message, ÒPrvt List FullÓ. You cannot add names until you remove some names from the list. 4. Next, the Prvt Ready screen displays the stored name. Storing Your Private ID To store your Private ID in your i 2000: 1. Press until you see the ÒPrgmÓ menu selection. 2. Select ÒPrgmÓ. 3. Press . The screen displays the message, Ò2=Own Pvt IDÓ. 4. Select ÒOkÓ. 5. Enter the Private ID provided by your carrier. 6. Select ÒStoreÓ.To view your private ID at any time after you store it: 1. Press until you see the ÒPrgmÓ menu selection. 2. Select ÒPrgmÓ. 3. Press . The screen displays the message, Ò2=Own Pvt IDÓ. The next line displays your Private ID. This is the number supplied by your carrier that you store in your phone. 4. Select ÒExitÓ.Prvt ReadyAlert Store12:43p 10/1856781Enter Name_ Cancl StoreJOHNStoredPrvt ReadyJOHNAlert Name12:45p 10/18

44 i2000 UserÕs Guide MAKING GROUP CALLS (IDEN ONLY) A Group Call allows you to communicate instantly with members of a selected TalkgroupÐa pre-deÞned set of people who share a communication need.Talkgroups appear on your display as numbers or programmed names, such as Talkgrp10 or Sales Team.To make a Group Call: 1. Press until ÒGroup ReadyÓ displays. Your most recently used talkgroup displays, for example, ÒTalkgrp 10Ó. 2. To place a call, do one of the following:¥ To speak to this talkgroup, press and hold the PTT button. Wait for the chirp, then speak into the microphone.¥ To speak to another talkgroup, press until you see the desired talkgroup name. Press and hold the PTT button.Wait for the chirp, then speak into the microphone. 3. To listen, release the PTT button. Receiving a Group Call When you receive an incoming Group call, you will hear a brief chirp-like tone. Your i 2000 automatically switches to Group mode, and the Talkgroup name displays. 1. Your phone must be idle, that is, not busy in an active call. 2. Wait for the caller to Þnish speaking, then press and hold the PTT button. Begin speaking after you hear the chirp. 3. To listen, release the PTT button.You can receive group calls only in the Talkgroups that you have predeÞned. For more information, see ÒAdding or Storing a TalkgroupÓ on page 45.Group ReadyTalkgrp 10Alert MailodeM

45 Making Group Calls (iden only) Adding and Storing a Talkgroup To add and store a talkgroup name to your i 2000: 1. Press until you see the ÒPrgmÓ menu selection. 2. Select ÒPrgmÓ. 3. Press , . 4. Select ÒOkÓ. 5. At ÒAdd New Entry?Ó, select ÒOkÓ. 6. At ÒEnter IDÓ, enter the desired talkgroup number and select ÒStoreÓ. 7. At ÒEnter NameÓ, enter a name for the talkgroup and select ÒStoreÓ. Area Selection In Group mode, you can call only those talkgroup members in a speciÞc location. This is useful when you know where the individuals are located within the service area. 1. Press until you see ÒGroup ReadyÓ on your display. 2. Press , then select ÒAreaÓ. 3. Press to scroll through the targeted areas speciÞed by your local carrier. 4. Select ÒOkÓ to select the targeted area. Private/Group Mode Speaker You can hear Group calls through either the earpiece or the speaker.Press the Speaker button on the i 2000 to turn the Private/Group Mode Speaker on or off.With the Speaker on, you will hear incoming calls through the speaker. This is useful to monitor talkgroup activity in Group mode.With the Speaker off, you will hear incoming calls through the earpiece.odeM

46 i2000 UserÕs Guide USING MAIL SERVICES Your i 2000 provides the following mail services: ¥ Voice Mail ¥ Message Mail When you receive a new message, the icon appears and ßashes. ¥ To read your new mail immediately, select ÒNowÓ. ¥ To read your new mail later, select ÒLaterÓ. An asterisk * next to a mail service indicates new mail. To use message services, select ÒMailÓ from any Ready screen. The inbox screen opens with your message services listed.To select a message service, scroll to highlight the service or press the corresponding number. For example, to access your Message Mail, press 2. Voice Mail When your i 2000 receives a Voice Mail message: ¥ The icon appears on your display.¥ The Voice Mail alert tone sounds (if Mail NotiÞcation is turned on).¥ The message, ÒNew Voice Mail WaitingÓ appears on your display.¥ An exclamation point (!) on the display indicates that you have at least one urgent message.From any mode: 1. Select ÒMailÓ. 2. Select ÒVoiceMailÓ.The VoiceMail inbox opens and displays the number of your new and total VoiceMail messages.To retrieve your voice mail immediately: 1. Select ÒDialÓ. This action automatically places a call to your voice mailbox. The most recent message is retrieved Þrst. 2. To close your voice mailbox, select ÒExitÓ. New MailLater NowRead?1>VoiceMail2>Mesg Mail*Exit Ok2>Mesg Mail1>VoiceMailExit OkExit DialVoice Mail 1 New 1 Total

47 Using Mail Services Message Mail Message Mail can be either a numeric page or a text message of up to 140 characters. Your phone can receive and store 16 mail messages at any time. 1. To postpone reading your mail and to clear the display, select ÒLaterÓ. The icon stops ßashing but remains on your display to remind you that you have unread messages. To read your mail now : 2. To read your mail now, select ÒNowÓ. The screen will brießy display the number of new and saved messages in your mailbox. 3. A list of all your messages will be displayed. Highlight the message that you wish to read and select ÒReadÓ. To read your mail later: 4. From any mode, select ÒMailÓ. The Mail box opens. 5. Select ÒMesg MailÓ. Your Message mailbox opens and brießy displays the number of new and saved messages currently in your mailbox. 6. Next, a list of all messages will display. Select the message that you wish to read and select ÒReadÓ. Your display shows the time and date that the sender entered the message into the network. Saving and Erasing Mail After you read a text or numeric message, you can either Save or Erase the message. Press under the desired option. Auto Call Back You can respond to numeric pages and text messages containing a call-back number. To automatically dial a number contained within a Message Mail, press . Exit Ok1 Voice Mail2> Mesg Mail>* Message Mail 2 New 0 Saved*1>FR: Smith11:15a 04/02Exit Read*2>FR: Jones

48 i2000 UserÕs Guide Mail Memory Full If all 16 message registers are full, your phone displays the message ÒMail Waiting, Memory FullÓ. You cannot receive new Message Mail until you empty register space by erasing saved or unread messages.

49 Setting Programming Menus SETTING PROGRAMMING MENUS You can customize the settings on your phone using the Programming Menu. 1. Press until you see ÒPrgmÓ on the display. 2. Select ÒPrgmÓ. 3. Select ÒOkÓ. 4. Press to scroll to the desired Programming Menu Option or enter the number of the Option. Table 5: Programming Menu Options Keypad Number Menu Option Function 1 Own Ph # Automatically store the telephone number of your phone after you receive the Þrst incoming call (Line1). You can also enter the number and view it. 2 Own Pvt ID Display the P rivate ID number of your phone. You must Þrst store this number. 3 Mail Display:Off Turn on and off the New Mail message that is displayed with incoming Voice or Message mail. 4 Manual Lock:Off Lock your phone to prevent unauthorized use. You must enter a pass code to unlock it.Even with the manual lock on, you can reach emergency help by pressing and holding the emergency key designated by your carrier. 5 Auto Lock:Off Automatically lock your phone each time it is powered off to prevent unauthorized use.

50 i2000 UserÕs Guide 6 Auto Answer:Off Turn on or off automatic answering of incoming phone calls after 1-4 rings. 9 Vibrate Alert:Off Receive a non-audible alert for incoming phone calls and messages. See ÒVibraCallªÓ on page 19.10 Last Call Timer Display the duration of the most recent phone call.11 Display Timer:Off Turn on or off automatic display of the Last Call Timer at the end of each phone call.12 Reset Timer Display cumulative airtime of all phone calls since last reset.13 Total Timer Display cumulative airtime of all phone calls.14 1 Minute Beep:Off Automatically signal each minute of elapsed phone airtime with an audible beep. 20 Phone/Prvt List Add phone and private numbers in one procedure. See ÒCombined Phone Number and Private ID ListÓ on page 30.21 Phone List Edit Edit and erase up to 100 frequently called phone numbers and associated names. See ÒEditing and Erasing Phone List EntriesÓ on page 33. Table 5: Programming Menu Options (Continued)Keypad Number Menu Option Function

51 Setting Programming Menus 22 Prvt ID List Edit Edit and erase up to 100 Private numbers and associated names. See ÒEditing and Erasing Private ID List EntriesÓ on page 33.23 Talkgrp List ProgramAdd/Edit/Erase numbers and associated names for up to 10 pre-programmed talkgroups. See ÒAdding and Storing a TalkgroupÓ on page 45.24 Area List Program Add/Edit/Erase numbers and associated names for up to 50 targeted areas.30 Ringer Volume Set the ringer volume using the volume control keys, or lower the volume to silence the ringer. See ÒSetting the Ringer VolumeÓ on page 21.31 Set Ring Style Select a distinct ring style for incoming phone calls. See ÒSelecting a Ring StyleÓ on page 21.32 Mail Volume Set the volume of incoming Message Mail and Voice Mail tones using the volume control keys, or lower the volume to silence the mail alert tones.33 Earpiece Volume Set the default earpiece volume using the volume control keys.34 Keypad Volume Set the volume of the keypad tones using the volume control keys, or to silence the keypad tones. Table 5: Programming Menu Options (Continued)Keypad Number Menu Option Function

52 i2000 UserÕs Guide 35 Speaker Volume Temporarily adjust the Group/Private Speaker volume for noisy environments.36 Spkr Vol Set Tone Turn the speaker volume set tones on or off.38 Silent Group Silence all incoming Group call alerts and voice activity. When set, your screen displays the message, Group Silent.40 Change Passcode Change your secret four-digit passcode from the initial setting 0000.46 Change SIM Card PINsChange your personal SIM card PIN.47 Require SIM Card PINSet or remove PIN requirement when you turn on your i 2000.48 Change Bar PasscodeChange your secret four-digit call barring passcode.55 Phone Sys Set your i 2000 for travel by choosing a phone system setting.56 GSM Network NameAdd, edit, or erase network names and network codes to the known list. (GSM only) 57 GSM Network SearchAutomatically or manually search for an available network. (GSM only) 58 GSM Network List ProgramAdd, edit, or erase entries in your preferred list. View entries from the known list. (GSM only) Table 5: Programming Menu Options (Continued)Keypad Number Menu Option Function

53 Setting Programming Menus 70 Language Select a language for your display text. The default is English. See ÒChanging the Display LanguageÓ on page 14.71 Time/Date Select the format for the time and date display. See ÒSetting the Time and DateÓ on page 12.80 Phone Only Turn on or off incoming Private and group services. See ÒPhone Only Mode (iDEN Only)Ó on page 29. NOTE Important! Do not perform the following shaded menu options unless you are instructed to do so by your carrier. You could damage your phone. Table 6: Other Programming Menu Options Option NumberMenu Option Function 41 Feature Reset Returns all feature settings to their original defaults.42 Master Clear Performs Feature Reset and erases all stored lists.43 Master Reset Resets the phoneÕs identiÞcation number.51 Network ID Edits the pre-programmed Network number list and selects roaming options. Table 5: Programming Menu Options (Continued)Keypad Number Menu Option Function

54 i2000 UserÕs Guide ABOUT STATUS MESSAGES You may receive status messages under certain conditions. Before contacting your carrier, note the message, numeric code, and the conditions under which it appeared. Table 7 lists and describes the error messages. Table 7: Status Messages Status Messages Message Description Number Not in Service The number that you entered is not valid.User Not Available The party that you called is either busy, out-of-range, or turned off. Please try again later.User Not Authorized The party that you called has not purchased this service.Please Try Later This service is temporarily not available. Please try again later.User Busy in Private The party that you called is busy in a Private call.Service Restricted This service was restricted by your carrier or it was not purchased.Service Not Available This feature is not available on the current network.System Busy Try Later The system is experiencing heavy trafÞc. Please try again later.Service Conßict This service cannot be enabled because an incompatible service has already been turned on.Please Try Again An error occurred. Note the error code and try again.

55 About Status Messages Self Check Error A fault was detected with your phone. If this error recurs, note the error code and contact your carrier.Self Check Fail An operational fault was detected with your phone. Note the numeric code, turn your phone off, and contact your carrier immediately. Table 7: Status Messages (Continued) Status Messages Message Description

56 i2000 UserÕs Guide ACCESSORIES Leather Carry Case The NTN9072A, leather carry case with belt clip, allows for easy attachment to a belt or purse. This case accomodates i2000 travel chargers, audio accessories, car accessories, and all battery types. Batteries Charging the Batteries Table 8 provides the approximate time to fully charge a battery using a Motorola iDEN-Approved Lithium Ion battery charger. Table 8: Battery Charging Times * Charging times are based on a fully discharged battery.For optimal battery life, use a Motorola iDEN Approved Lithium Ion charger with your Motorola iDEN Lithium Ion battery. Other chargers may not fully charge your Lithium Ion battery or may yield a reduced number of cycles. Battery Operating Instructions ¥ Extreme temperatures will degrade battery performance. Do not store your battery where temperatures exceed 60¡C (140¡F) or fall below -20¡C (4¡F).¥ This Lithium Ion battery has a self discharge rate and without use, will lose about 1% of its charge per day.¥ The battery capacity will be degraded if stored for long periods while fully charged. If long term storage is required, store at half capacity. ¥ The Motorola iDEN Approved Lithium Ion chargers will provide optimum performance. Other chargers may not fully charge your NOTE ¥ For best results, charge the batteries within the temperature range of 10 o C to 40 o C (50 o F to 104 o F).¥ Prolonged charging is not recommended. See Table 8 for battery charging guidelines. MOTOROLA BATTERIESKit Number Description/Chemistry Charging Time* NTN8615 Slim Lithium Ion 2.5 HoursNTN8614 Standard Lithium Ion 3 Hours

61 Safety and General Information SAFETY AND GENERAL INFORMATION For the Safe and EfÞcient Operation of Your Radio, Observe These Guidelines: Your radio product contains a transmitter and a receiver. When it is ON , it receives and transmits radio frequency (RF) energy. The radio operates in the frequency range of 806 MHz to 870 MHz or 890 MHz to 960 MHz, and employs digital modulation techniques. When you communicate with your radio product, the system handling your call controls the power level at which your radio product transmits. The output power level typically may vary over a range from 0.00024 watts to 0.6 watts at, or below, 870MHz, and 3.2 watts at, or above, 890 MHz. Exposure To Radio Frequency Energy Your Motorola Radio Product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy:¥ United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J¥ American National Standards Institute (ANSI) IEEE. C95. 1-1992¥ National Council on Radiation Protection and Measurements (NCRP). Report 86 ¥ International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998¥ National Radiological Protection Board of the United Kingdom, GS 11, 1988¥ Verband Deutscher Elektrotechniker (VDE) DIN-0848¥ Department of Health and Welfare Canada. Safety Code 6To assure optimal radio product performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures:When placing or receiving a phone call, or using the group and private call functions with a Group/Private Speaker OFF (muted speaker icon visible in the display), hold your radio product as you would a telephone. Speak directly into the microphone and position the antenna up and over your shoulder. IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR INTEGRATED MULTI-SERVICE PORTABLE RADIO.

62 i2000 UserÕs Guide When using your radio product as a traditional two-way radio while making group or private calls with the Group/Private Speaker ON (no speaker icon visible in the display), hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.For body-worn operation, with or without an earpiece or any other accessory, the antenna should be kept at least one inch (2.5 cm) from the body when transmitting. A Motorola accessory, a leather carry case with a belt clip, is available for body-worn use.DO NOT hold the antenna when the radio is ÒIN USEÓ. Holding the antenna affects call quality and may cause the radio product to operate at a higher power level than needed. Interference to Medical and Personal Electronic Devices Most electronic equipment is shielded from RF energy. However, certain equipment may not be shielded against the RF signals from your radio product. Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of 6 inches (15 cm) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.Persons with pacemakers should:¥ ALWAYS keep the radio product more than six inches from the pacemaker when the radio product is turned ON. ¥ Not carry the radio product in a breast pocket. ¥ Use the ear opposite the pacemaker to minimize the potential for interference. ¥ Turn the radio product OFF immediately if you have any reason to suspect that interference is taking place. Hearing Aids Some radio products may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.

63 Safety and General Information Turn your radio product OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Interference to Other Electronic Devices RF energy may affect improperly installed or inadequately shielded electronic operating and entertainment systems in motor vehicles. Check with the manufacturer or representative to determine if these systems are adequately shielded from external RF energy. Also check with the manufacturer of any equipment that has been added to the vehicle.Turn your radio product OFF before boarding any aircraft to prevent possible interference to aircraft systems. Regulations of the United States Federal Communications Commission prohibit use when the plane is airborne. The United States Department of Transportation regulations require you have permission from a crew member to use your radio product while the plane is on the ground. Safety and General Use While Driving Check the laws and regulations on the use of wireless telephones in the area where you drive. Always obey them. When using the radio product while driving, please:¥ Give full attention to driving and to the road¥ Use hands-free operation, if available¥ Pull off the road and park before making or answering a call if driving conditions so require.

64 i2000 UserÕs Guide OPERATIONAL WARNINGSPOTENTIALLY EXPLOSIVE ATMOSPHERESTurn off your radio product when you are in any area with a potentially explosive atmosphere, unless it is a radio product type especially qualiÞed for use in such areas (for example, Factory Mutual Approved). Sparks in a potentially explosive atmosphere can cause an explosion or Þre resulting in bodily injury, or even death.Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as: below decks on boats; fuel or chemical transfer or storage facilities; areas where the air contains chemicals or particles such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often, but not always posted.BatteriesDo not replace or charge batteries in a potentially explosive atmosphere. Contact sparking may occur while installing or removing batteries and cause an explosion.BLASTING CAPS AND AREASTo avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: ÒTurn off two-way radioÓ. Obey all signs and instructions.FOR VEHICLES EQUIPPED WITH AN AIR BAGDo NOT place objects, including both installed and portable wireless equipment, in the area over the air bag or in the air bag deployment area. An air bag inßates with great force. If in-vehicle wireless equipment is improperly installed and the air bag inßates, serious injury could result.!W A R N I N G!

65 Safety and General Information Cleaning Instructions Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners. Also, avoid applying liquids directly on the radio product. Antenna Considerations Use only the supplied or an approved antenna. Unauthorized antennas, modiÞcations, or attachments could impair call quality, damage the radio product, or result in violation of local agency regulations. OPERATIONAL CAUTIONSDAMAGED ANTENNASDo not use any portable radio product that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result.BATTERIESAll batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects.!C a u t i o n

66 i2000 UserÕs Guide Accessory Safety Information IMPORTANT:SAVE THESE ACCESSORY SAFETY INSTRUCTIONS ¥ Before using any battery or battery charger, read all the instructions for and cautionary markings on (1) the battery, (2) the battery charger, which may include a separate wall-mounted power supply or transformer, and (3) the radio product using the battery.¥ Do not expose any battery charger to water, rain, or snow as they are designed for indoor or in-vehicle use only.¥ Since a battery charger is designed for indoor or in-vehicle use only, do not expose a battery charger to water, rain, or snow. ¥ To reduce the risk of damage to the cord or plug, pull by the plug rather than the cord when you disconnect the battery charger from the power source outlet. ¥ Do not operate any battery charger with a damaged cord or plug - replace them immediately.¥ Battery chargers may become warm during operation, but not hot. If it becomes hot to the touch, unplug it from the power outlet immediately and discontinue its use. ¥ Use of a non-recommended attachment to a battery charger may result in a risk of Þre, electric shock, or injury to persons.¥ Make sure the battery charger power cord is located so that it will not be stepped on, tripped over, or subjected to damage or stress.¥ An extension cord should not be used with any battery charger unless absolutely necessary. Use of an improper extension cord could result in a risk of Þre and electric shock. If an extension cord must be used, make sure that:¥ The pins on the plug of the extension cord are the same number, size, and shape as those on the plug of the charger.¥ The extension cord is properly wired and in good electrical condition. ¥ The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet.To reduce the risk of injury, charge only the rechargeable batteries listed in the Accessories section of this manual. Other types of batteries may burst, causing personal injury and damage.!W A R N I N G!

67 Accessory Safety Information¥ Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualiÞed service technician.¥ Do not disassemble a battery charger; take it to a qualiÞed service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or Þre.¥ Maximum ambient temperature around the power supply or transformer of any battery charger should not exceed 40¡C (104¡F).¥ The output power from the power supply or transformer must not exceed the rating given on the Desktop Dual-Pocket Charger.¥ The disconnection from the line voltage is made by unplugging the power supply from the AC receptacle.¥ To reduce risk of electric shock, unplug any battery charger from the outlet before attempting any maintenance or cleaning.¥ For optimum charging performance, turn off the radio product while charging it in any battery charger.

68 i2000 UserÕs Guide LIMITED WARRANTY MOTOROLA COMMUNICATION PRODUCTSI. What This Warranty Covers and For How Long:MOTOROLA, INC. (ÒMOTOROLAÓ) warrants the MOTOROLA manufactured iDEN Communication Products listed below (ÒProductÓ) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:Rechargeable Batteries will be replaced during the applicable warranty period if:A) the battery capacity falls below 80% of rated capacity, orB) the battery develops leakage.MOTOROLA, at its options, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modiÞcations to this warranty unless made in writing and signed by an ofÞcer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty. Because each system which may use the Product is NOTE: This Warranty applies within the Þfty (50) United States and the District of ColumbiaiDEN Subscriber Digital Mobile and Portable UnitsOne (1) YearProduct Accessories One (1) Year

69 Limited Warranty Motorola Communication Productsunique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty.II. General Provisions:This warranty sets forth the full extent of MOTOROLAÕS responsibilities regarding the Product, Repair, replacement or refund of the purchase price, at MOTOROLAÕS options, is the exclusive remedy. THIS WARRENTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.III. State Law Rights:SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY.This warranty gives speciÞc legal rights, and there may be other rights which may vary from state to state.IV. How to Get Warranty Service:You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you Þrst contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call MOTOROLA at 1-800-453-0920 for warranty service location information.V. What This Warranty Does Not Cover:a. Defects or damage resulting from use of the Product in other than its normal and customary manner.b. Defects or damage from misuse, accident, water, or neglect.c. Defects or damage from improper testing, operation,

70 i2000 UserÕs Guide maintenance, installation, alteration, modiÞcation, or adjustment.d. Breakage or damage to antennas unless caused directly by defects in material workmanship.e. A Product subjected to unauthorized Product modiÞcations, disassemblies or repairs (including, without limitation, the audition to the Product of non-MOTOROLA supplied equipment) which adversely affect performance of the Product or interfere with MOTOROLAÕS normal warranty inspection and testing of the Product to verify any warranty claim.f. Product which has had the serial number removed or made illegible.g. Rechargeable batteries if:h. 1.Any of the seals on the battery enclosure of cells are broken or shoe evidence of tampering.i. 2.the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is speciÞed.j. Freight costs to the repair depot.k. A Product which, due to illegal or unauthorized alteration of the software/Þrmware in the Product, does not function in accordance with MOTOROLAÕS published speciÞcations or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.l. Scratches or other cosmetic damage to Product surfaces that does not effect the operation of the Product.m. Normal and customary wear and tear.VI. Patent and Software Provisions:MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and Motorola will pay those costs and damages Þnally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:a. that MOTOROLA will be notiÞed promptly in writing by such purchaser of any notice of such claim;b. that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; andc. Should the Product or parts become, or in MOTOROLAÕS

71 Limited Warranty Motorola Communication Productsopinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue to using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by Motorola, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or sued in connection with the Product or any parts thereof.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted. MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modiÞed in any way, or used to product any derivative thereof. No other use including, without limitation, alteration, modiÞcation, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.

72 i2000 UserÕs Guide OWNERÕS INFORMATIONMobile Equipment IdentiÞer (IMEI)_____________________________Own Phone Number_____________________________Own Private Number_____________________________Date Purchased______________Dealer Telephone Number_______________________Customer Service Number_______________________

73 OwnerÕs InformationPrivate Number DirectoryTalkgroup DirectoryPrivate Number Name123456789Talkgroup Number Name123456789

74 i2000 UserÕs Guide EUROPEAN UNION DIRECTIVES CONFORMANCE STATEMENTThis product is in conformance with the requirements of the applicable EU Council Directives.Declarations of Conformance with the requirements are located atMotorolaiDEN Subscriber Division8000 West Sunrise BoulevardPlantation, Florida 33322United States of America (U.S.A.)APPROVED for connection to telecommunications systems speciÞed in the instructions for use subject to the conditions set out in them.S/1357/4/V/503894

Navigation menu