Motorola Solutions 89FT5801 iDEN i2000plus User Manual

Motorola Solutions, Inc. iDEN i2000plus

UserManual.wiki >

Motorola Solutions >

89FT5801 User Manual >

Amended Users Manual

Contents

1. Users Manual
2. Amended Users Manual

Amended Users Manual

MotorolaiDEN®Digital Multi-Service Data Capable Phonei2000plus User’s Guide @NTN9487A@NTN9487A

iiwww.motorola.com

ContentsiiiContentsCONTENTSPatent and Trademark Information............................ iWireless Phone Safety Tips....................................... viiiWelcome ....................................................................... 11Setting Up Your i2000plus Phone for Use................................ 12TTY Access............................................................................... 12Large Print Manuals.................................................................. 12Features of Your i2000plus Phone ........................................... 13Inserting the SIM Card.............................................................. 15Charging and Attaching the Battery.......................................... 16Turning On Your i2000plus Phone........................................... 17Light Sensor .............................................................................. 18SIM Card PIN ........................................................................... 19Entering the PIN................................................................... 19Unblocking the PIN.............................................................. 19Changing the PIN ................................................................. 20Disabling the PIN Requirement............................................ 21Enabling the PIN Requirement............................................. 21Keypad Lock ............................................................................. 22Display Icons............................................................................. 22About Modes and Menus .......................................................... 23Setting the Time and Date......................................................... 24Changing the Display Language ............................................... 25Selectable Backlight Timer....................................................... 26Making Phone Calls .................................................... 27International Phone Calls Using Plus Dialing ...................... 27Inserting Pauses into Phone Numbers .................................. 27Using Other Dialing Methods................................................... 27Scroll..................................................................................... 28Speed Dial ............................................................................ 28Name Search......................................................................... 28Last Number Redial.............................................................. 28Turbo Dial® ......................................................................... 28Automatic Redial.................................................................. 29Emergency Dial.................................................................... 29Hands-Free Speakerphone ........................................................ 29Receiving a Phone Call ............................................................ 30

ivwww.motorola.comMissed Call Indicator................................................................ 30What Is My Phone Number?..................................................... 31VibraCall® Alert....................................................................... 31Selecting VibraCall Alert for All Incoming Callsand Messages........................................................................ 32Selecting VibraCall Alert for Individual Services................ 32Setting the Ringer Volume........................................................ 33Selecting a Ring Style ............................................................... 33Additional Call Services ............................................. 35Call Forwarding ........................................................................ 35Unconditional Call Forwarding............................................ 35Conditional Call Forwarding................................................ 36Call Waiting .............................................................................. 37Call Hold ................................................................................... 373-Way Calling ........................................................................... 37Call Barring............................................................................... 38Barring Incoming Calls ........................................................ 38Barring Outgoing Calls......................................................... 39Viewing Call Barring Status................................................. 40Changing Your Call Barring Passcode................................. 40Alternate Phone Line (iDEN Only) .......................................... 41Setting the Active Line......................................................... 41Receiving a Call ................................................................... 41Receiving a Call on Your Alternate Line............................. 42Phone Only Mode (iDEN Only) ............................................... 42Creating, Editing, and Using Stored Lists................ 44Combined Phone Number and Private ID List..................... 44Pre-Pend Feature ....................................................................... 44Last 10 Calls Received and Sent Lists ................................. 48Quickstore of Phone Numbers.............................................. 49Traveling Between Systems........................................ 51Searching for a Network....................................................... 51Storing Your Preferred List of Networks ............................. 52Storing New Networks to Your Known List ............................ 53Making Private Calls (iDEN Only) ........................... 55Receiving a Private Call............................................................ 55Private/Group Mode Speaker.................................................... 56Call Alert................................................................................... 56

ContentsvSending a Call Alert ............................................................. 56Receiving a Call Alert .......................................................... 56Call Alert Queuing ............................................................... 57Clearing or Queueing a Call Alert........................................ 57Responding to a Queued Call Alert...................................... 57Quickstore of Private IDs.......................................................... 57Viewing Your Private ID .......................................................... 58Making Group Calls (iDEN Only) ............................. 59Receiving a Group Call............................................................. 59Adding and Storing a Talkgroup............................................... 59Area Selection ........................................................................... 60Private/Group Mode Speaker.................................................... 60Using Mail Services. .................................................... 61Net Mail .................................................................................... 61Voice Mail................................................................................. 62Alert Receipt ............................................................................. 63Message Mail ............................................................................ 63Saving and Erasing Mail ...................................................... 64Auto Call Back ..................................................................... 64Mail Memory Full ................................................................ 64Using Your Phone as a Modem .................................. 65Setting Programming Menus...................................... 66About Status Messages................................................ 73Accessories.................................................................... 75Leather Carry Case.................................................................... 75Batteries ............................................................................... 75Charging Lithium Ion Batteries............................................ 75Battery Operating Instructions ............................................. 76Travel Charger .......................................................................... 76Using the Travel Charger ..................................................... 77Travel Charger Operating Specifications ............................. 77Vehicular Battery Charger ........................................................ 77Using the Vehicular Battery Charger ................................... 78Removing the Vehicular Battery Charger ............................ 78Vehicular Battery Charger Operating Specifications........... 79Desktop Dual-Pocket Charger .................................................. 79Charging a Battery................................................................ 79

viwww.motorola.comAudio Adapter........................................................................... 80Using the Audio Adapter...................................................... 80Attaching/Detaching the Earpiece Microphone ................... 80 Removing the Audio Adapter.............................................. 80Hands-Free Car Kit .................................................... 81Using the Hands-Free Car Kit................................................... 82Dash Mount Holder................................................................... 83Using the Dash Mount Holder.............................................. 84Safety and General Information................................ 85RF Operational Characteristics ................................................. 85Exposure To Radio Frequency Energy ..................................... 85Portable Radio Product Operation and EME Exposure ............ 86Antenna Care........................................................................ 86Phone Operation ................................................................... 86Two-way radio operation ..................................................... 86Body-worn operation............................................................ 86Data operation ...................................................................... 86Approved Accessories .......................................................... 87Electro Magnetic Interference/Compatibility ........................... 87Facilities ............................................................................... 88Aircraft ................................................................................. 88Medical Devices........................................................................ 88Pacemakers ........................................................................... 88Hearing Aids......................................................................... 88Other Medical Devices ......................................................... 88Use While Driving .................................................................... 89Operational Warnings................................................ 90For Vehicles Equipped with an Air Bag ................................... 90Potentially Explosive Atmospheres .......................................... 90Blasting Caps and Areas ........................................................... 90Operational Cautions ................................................. 91Antennas.................................................................................... 91Batteries .................................................................................... 91Cleaning and Drying Considerations ........................................ 91Accessory Safety Information.................................... 93Limited Warranty Motorola Communication Products (U.S.)............................................................................. 95

ContentsviiLimited Warranty Motorola Communication Products (international) .............................................................. 99Owner’s Information................................................. 103Private Number Directory .................................................. 104Talkgroup Directory ........................................................... 104European Union Directives ConformanceStatement.................................................................... 105Index ............................................................................107

viiiwww.motorola.comWireless Phone Safety Tips“Safety is your most important call!”Your Motorola wireless telephone gives you the powerful ability to communicate by voice--almost anywhere, anytime, wherever wireless phone service is available and safe conditions allow. But an important responsibility accompanies that benefits of wireless phones, one that every user must uphold.When driving a car, driving is your first responsibility. If you find it necessary to use your wireless phone while behind the wheel of a car, practice good common sense and remember the following tips:1. Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call with-out taking your attention off the road.2. When available, use a hands-free device. If possible, add an additional layer of convenience to your wireless phone with one of the many Motor-ola Original hands-free accessories available today.3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.5. If you receive an incoming call at an inconvenient time do not take notes or look up phone numbers while driving. Jotting down a “to do” list or going through your address book takes attention away from your primary respon-sibility--driving safely.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.7. Do not engage in stressful or emotional conversations that may be distract-ing. Make people you are talking with aware you are driving and suspend conversations which have the potential to divert your attention away from the road.8. Use your wireless phone to call for help. Dial 9-1-1 or other local emer-gency number in the case of fire, traffic accident or medical emergencies.*9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.** Wherever wireless phone service is available.

Wireless Phone Safety Tipsix10. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no seri-ous hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.** Wherever wireless phone service is available.

xwww.motorola.comIMPORTANT!Be sure to read “Safety and General Information” on page 85 before using your i2000plus phone.

Welcome11WelcomeWELCOMEongratulations on purchasing your Motorola iDEN i2000plus multi-service, data-capable, digital, portable global phone. The use of two state-of-the-art technologies, iDEN and GSM (Global System for Mobile communications), provides worldwide services to keep you in touch with your business and personal contacts when you travel. A removable Subscriber Identity Module (SIM) card holds all your personal information, including secure Personal Identification Numbers (PINs), names, and phone numbers. Just as you protect your credit and bank cards with PINs, you can safeguard your SIM card with a PIN.Exciting new features include a vibration-only key, call barring, and a missed-call indicator to help provide efficient operation of your i2000plus phone. And, new ease-of-dialing features, such as Turbo Dial® key and the Last Ten Received and Sent lists, as well as stored names and numbers, help you to quickly make and return phone calls.Your i2000plus phone offers: • Phone Mode - for cellular phone operation. See Page 27.• Private Mode - for two-way radio use to talk with one person in your iDEN service area. See Page 55.• Group Mode - for two-way radio use to talk with several people in your iDEN service area. See Page 59.• Messaging Services* - for message and voice mail. Page 61• Net Mode* - for accessing the built-in mini-browser. See the Net Mode User’s Guide.• Fax and Data Transfer* - for circuit data faxes and file transfers. See “Using Your Phone as a Modem” on page 65. See the Wireless Data Services User’s Guide for information about data calls and TTY access. * Network dependent feature. Not available in all areas.NOTE • Some features of your i2000plus phone are available only in the iDEN service area, and are indicated as such in this guide.• This guide describes the features of the i2000plus phone as they were set up by Motorola. However, your carrier or your organization may have changed or added features. For more information, check with your carrier or your organization.C

12www.motorola.comSetting Up Your i2000plus Phone for UseBefore you can use your new i2000plus phone, you’ll need to: 1. Insert the SIM card—see Page 15. 2. Attach the battery—see Page 17. 3. Turn on your i2000plus phone—see Page 17. 4. Optional: Enter a PIN for your SIM card—see Page 19.TTY AccessTTY access is available on your phone. See the Wireless Data ServicesUser’s Guide for complete instructions.Large Print ManualsA large-print version of the phone’s User’s Guide is available. Formore information on Motorola products for people with disabilities,contact Motorola Customer Care at 1-800-453-0920 or TTY 1-877-483-2840.

Welcome13Features of Your i2000plus Phone NOTE: *These features are available in the Net Mode mini-browser.(Subscription-dependent features are not available in all areas.)NOTE: Remove the plastic film lens protector from the display before you use your phone for the first time.plusnext7. LED14. Light Sensor15. Option Keys13. Alphanumeric Display18. Alphanumeric Keypad19. *Home Key21. Speaker Key20. *Next Key17. Menu Key22. Accessory and Data CableConnector2. Earpiece16. Send/End Key1. Antenna4. Push-To-Talk (PTT) Button3. Volume5. Scroll Key6. Mode Key8. On/Off9. *Punctuation10. *Back Key11. Vibe-all Key12. Microphone

14www.motorola.com 1. Antenna Extend for optimal signal. 2 . Earpiece Listen to calls when the speakerphone is off. 3 . Volume Control ButtonsPress to adjust volume levels in Phone, Private, and Group modes. In mail menus, press to scroll forward and backward. 4 . Push-To-Talk (PTT) ButtonTransmit a Private or Group Call, or a Call Alert. Press and hold to talk; release to listen. (iDEN use only) 5 . Scroll Key Press the left side to scroll backward or the right side to scroll forward through menu options and lists. When entering text, press to erase text or add a space. 6 . Mode Key Press to change modes. (iDEN use only) 7 . LED (Light Emitting Diode) Check the phone’s status. See Table on page 18 for more information. 8 . On/Off Button Press and hold to turn your i2000plus phone on or off. 9 . Punctuation Key*Add punctuation in the Net Mode mini-browser (within T9TM Text Input). 1 0 . Back* Key Return to the previous mini-browser screen. 1 1 . Vibe-All Key Press to deactivate or turn on the vibration alert. 1 2 . Microphone Use to speak during calls.13. Alphanumeric DisplayView up to four lines (up to 12 characters per line) on the display.14. Light Sensor When a key is pressed, the light sensor will activate the backlight only when your phone is in poor lighting conditions.15. Option Keys Press the right or left option key to select the menu option that appears directly above the key.

Welcome15Inserting the SIM CardThe SIM card contains all your stored names, numbers, and PINs after you enter them in your i2000plus phone. You can make a phone call only when the SIM card is properly placed in the phone. Important! Insert and remove your SIM card with care so that you do not lose it. To insert the SIM card: 1. If your i2000plus phone is on, press and hold f until you see the message “Powering Off”. 2. Turn the phone over so that the antenna is at the upper left corner.16. Send/End Key Press to answer an incoming Phone call. After entering a phone number, press to dial the call or to redial the entered phone number. Press to end Phone calls.17. Menu Key Press to scroll through menu options.18. Alphanumeric KeypadEnter telephone numbers, Private Call IDs, and alphanumeric characters. 19. Home Key*Press to return to the mini-browser Home menu.20. Next Key*Press to display the next word choice in the mini-browser (within T9 Text Input).21. Speaker/Speakerphone KeyPress to switch between the earpiece and speaker during Private and Group calls. (iDEN use only) When in a phone call, press to activate speakerphone (iDEN and GSM)22. Accessory and Data Cable ConnectorUse to connect accessories or the battery charger.* These features are available in the Net Mode mini-browser.(Subscription-dependent features are not available in all areas.)NOTE Depending on the network that you are on, you may be able to make an emergency call without a SIM card.

16www.motorola.com 3. If the battery is attached, remove it. For information, see “Detaching the Battery” on page 17. 4. Slide the latch to the left position and open the SIM card holder. 5. If you have a full-size SIM card, gently punch out the mini SIM card. 6. Position the cut corner of the SIM card as illustrated and slide the card into the holder. 7. Close the card holder andslide the latch to the right. 8. Now, you can attach the battery. See “Attaching the Battery” on page 17.Charging and Attaching the BatteryRemove the battery from the protective case provided in the original packaging. When the battery is not attached to the phone or being charged, store it in this case.Charging the Battery Attach the charger connector to the i2000plus phone, then flip open the prongs and plug the charger into an electrical outlet. Fo r m ore information about chargers, see “Travel Charger” on page 76, “Vehicu la r Battery Charger” on page 77, and “Desktop Dual-Pocket Charger” on page 79.NOTE After attaching the battery, you must charge it before you use it for the first time. After the initial charging, the battery can be charged more quickly.LatchLatchSIM cardholderSIMcard

Welcome17Attaching the BatteryTo attach the battery to your i2000plus phone, align the battery as shown. Press down on the battery latch until you hear a click. Battery and Charging Sta-tusA low battery is indicated by a short, chirp-like sound through the speaker. The battery strength icon shows the remaining charge in the battery. Three bars indicate full charge. When you have less than five minutes of talk time remaining, the indicator flashes.Figure 1. Battery Charging Status Detaching the BatteryTo detach the battery, press the latch to release the battery and pull out the battery.Turning On Your i2000plus PhonePress f until a set of icons appears on your display. (For a description of the icons, see Page 22.) Then a message, such as “Please Wait”, displays while the i2000plus phone connects to your carrier’s network. First Screen Second Screen Third ScreenIconFlashesCharging Low Battery 0-30% 31-60% 61-90% 91-100%Discharging Low Battery 0-10% 11-40% 41-70% 71-100%NOTE Before removing the battery, make sure the phone is turned Off. LatchStandard Battery 900 mAhSlim Battery 500 mAh(Your Carrier(888)555-1212Message) Please WaitConnecting

18www.motorola.comThe second line of text on the Phone Ready screen displays the System Name, which is the name of the network providing service in the iDEN or GSM service area.If your Home carrier is an iDEN carrier, then when you are in an iDEN service area, the third line displays the local time and date. When you are in the GSM service area, the third line displays the name of your Home carrier.The LED indicator located on the front of the i2000plus phone shows the service state. See Table 1 .Turning Off Your i2000plus PhonePress and hold f until you see the message “Powering Off”.Light SensorOn your i2000plus phone, when a key is pressed, the light sensor will activate the backlight only when your phone is in low light conditions. If illumination is needed, even when the backlight is not present, you can manually override the sensor by pressing and holding n. This will activate the backlight. In a charger, the backlight will always be illuminated.Table 1: Status Light (LED) Indicator LED Indicator Status of Your i2000plus PhoneFlashing Red Registering—your i2000plus phone is signing on to your carrier’s network. Please wait.Solid Red No service—your i2000plus phone cannot sign on. It will continue trying to connect every two minutes as long as it is turned on.Flashing Green In service—your i2000plus phone is ready to use.You can now place and receive calls. Solid Green In use—your i2000plus phone is currently being used. Check to make sure that you ended the last call by pressing e.

Welcome19SIM Card PIN To prevent unauthorized use of your phone, you may set a SIM card PIN. After the PIN is set, each time the i2000plus phone is turned on, a PIN must be entered. After you set a PIN, you can later change or disable it.If your i2000plus phone requires a SIM PIN, follow the steps in “Entering the PIN” on page 19.If your i2000plus phone does not require a PIN and you wish to set one, follow the steps in “Enabling the PIN Requirement” on page 21.Entering the PIN 1. Carefully enter your PIN. As you enter it, an asterisk appears for each character. This prevents others from seeing your PIN. If you enter an incorrect PIN, the mes-sage, “Wrong PIN” appears. After three incorrect attempts, even if you turn off the phone and turn it on again, the SIM card PIN is blocked. If this happens, see “Unblocking the PIN” on page 19. 2. Select “OK”. Now you are ready to place calls or check your mail.You can disable the PIN entry requirement. For more information, see “Disabling the PIN Requirement” on page 21. Unblocking the PINIf you forget your PIN and try unsuccessfully to enter it three times, access to your i2000plus phone with that SIM will be blocked. To gain access, you must first unblock the PIN.NOTE The Time and Date will not appear on your display when operating in GSM phone networks. Enter****Cancl OkSIM PIN Phone Ready(System Name)Name Mail 2:12p 07/21 Name MailPIN BlockedCall Your Provider

20www.motorola.comTo unblock the PIN: 1. Call your carrier for your PUK (PIN unblock code). 2. At the “Enter PUK” screen, enter your PIN Unblocking Key (PUK). As you enter it, an asterisk appears for each character. This prevents others from seeing your PUK. 3. Select “OK”. 4. At the “New PIN” screen, enter a new PIN. 5. Select “OK. 6. At the “Repeat New PIN” screen, enter the new PIN again. 7. Select “OK”. After the SIM stores your new PIN, your phone is ready for normal use.Changing the PINTo change your SIM card PIN: 1. From the Phone Ready screen, press n until you see the “Prgm” menu option. 2. Select “Prgm”. 3. Press 4, 6. 4. Select “OK”. At the “Change PIN?” screen, select “OK”. 5. At the “Old PIN” screen, enter your current PIN then select “OK”. 6. At the “New PIN” screen, enter your new PIN then select “OK”. 7. At the “Repeat New PIN” screen, enter your new PIN again then select “OK”.NOTE If you unsuccessfully enter the PUK number ten times, the PUK is blocked. If this happens, you will get a message to call your service provider. Depending on the network that you are on, you may be able to make emergency calls without a SIM card. Enter PUK **_______Cancl Ok New PIN **_______Cancl Ok 46=Change SIM PINsExit Ok New PIN ****Cancl Ok

Welcome21Disabling the PIN RequirementImportant! If you disable the PIN requirement, you remove protection of the personal data on your SIM card each time your i2000plus phone is turned on. Anyone can then use your phone and your personal data. 1. From the Phone Ready screen, press n until you see the “Prgm” menu option. 2. Select “Prgm”. 3. Press 4, 7. The “47=Require SIM PIN:On” screen displays, indicating that the PIN requirement is set. 4. Select “Off”. 5. Enter your SIM PIN (your carrier provides the initial SIM Card PIN). 6. Select “Ok”. 7. Select “Exit”.Enabling the PIN Requirement 1. From the Phone Ready screen, press n until you see the “Prgm” menu option. 2. Select “Prgm”. 3. Press 4, 7. The 47=Require SIM PIN:Off” screen displays, indicating that the PIN requirement is off. 4. Select “On”. 5. Enter your SIM PIN (your carrier provides the initial SIM Card PIN). 6. Select “Ok”. 7. Select “Exit”.When the PIN is enabled, you are prompted to enter your PIN each time you turn on your i2000plus phone. Until a valid PIN is entered, you can use the phone only to enter the emergency number. After the PIN is accepted, the Phone Ready screen displays. NOTE Important! Incorrectly entering your PIN three times causes the phone to be blocked. To unblock your phone, you must contact your carrier. 47=Require Exit OffSIM PIN:On 47=Require SIM PIN:OffExit OnEnterSIM PIN

22www.motorola.comKeypad LockOn your i2000plus phone you may lock your keypad in Phone Mode so inadvertent key presses will not result in digits being dialed or a phone call being placed. When in Phone Mode, press n then * sequentially to activate the Keypad Lock feature. To deactivate the Keypad Lock feature, press n then * sequentially. While the keypad is locked, the only keys that may be pressed are f to turn off your phone, or n followed by * to turn off the keypad lock. The keypad lock will be automatically suspended if the i2000plus phone receives a Phone, Private, or Group call. At the end of the call, the keypad lock will be automatically re-activated (if in Phone mode).Display IconsDisplay icons appear on the screen to inform you of existing conditions. See the following list.The following icons may appear along the top of the display.NOTE: Emergency Calls cannot be placed while the keypad lock is active.Signal Strength IndicatorShows the signal strength. Six bars indicate the strongest signal. Calls and messages may not be sent or received in weak signal areas.Battery Strength IndicatorShows the remaining charge in your battery. Three bars show full charge. The indicator flashes when you have less than five minutes of talk time remaining.Voice MailIndicates that unplayed messages are waiting in your voice mail box.New Message MailIndicates that you have new text messages in your mail box.Unread Message MailIndicates that you have unread Message Mail.VibraCall® alertIndicates that the VibraCall alert option is turned on. You will not hear a ring tone.

Welcome23About Modes and Menus Modes and menus are the navigational tools, providing access to the various features of your i2000plus phone. Pressing m takes you through the mode choices. Pressing n takes you through the menu options within each mode.There are four modes: • Phone–For cellular phone calls. See Page 27. • Private–for one-to-one radio calls. See Page 55.• Group–For radio calls with all individuals in a designated talkgroup. See Page 59. • Net–for mini-browser use*. See the Net Mode User’s Guide.To change modes:Press m until you see the desired mode.To select menu options:Call Forward*Indicates that incoming phone calls are being forwarded.Active Line Indication Displays the active phone line (1 or 2). Private/Group SpeakerIndicates that the Private/Group speaker is off. You will hear calls through the earpiece. Packet Data*Indicates packet data registration. The blinking arrows indicate send and receive activity. For more information, see the Wireless Data User’s Guide.Some of the following icons may appear in the mini-browser.Secure Packet Data ConnectionIndicates that your packet data information is encrypted during transmission.More InformationIndicates that there is more text to read above, below, or above and below the current screen.* Network and subscription dependent feature. Not available in all areas.

24www.motorola.comPress n until you see the desired menu option, then press o under the desired menu option to select it.Setting the Time and Date If your carrier provides this option, you can set your phone to display the current time and date. Unless the phone is turned off, it continues to display the current time during a loss of service. You have a choice of a 12- or a 24-hour clock format. See Table 2.You have a choice of either a MM/DD (month/day) or a DD/MM (day/month) date format. See Table 3.If your carrier activates the time and date, they are displayed on the third line in all modes (Phone, Private, and Group). The time of day is also shown during an active Phone call. The time and date are not displayed in Group mode when you select an Area option.NOTE When this feature is activated, your phone automatically displays local time.Table 2: Time Display Options 12-Hour Display 24-Hour Display 12:00a 00:00 6:25a 06:25 12:00p 12:00 6:25p 18:25Table 3: Date Display OptionsDateMonth/Day Format(MM/DD)Day/Month Format (DD/MM)January 2nd 01/02 02/01January 31st 01/31 31/01October 9th 10/09 09/10December 31st 12/31 31/12

Welcome25To set the time and date format: 1. From the Phone Ready screen, press n until you see the “Prgm” menu option. 2. Select “Prgm” 3. Press 7, 1. 4. Select “Ok”. The Time/Date screen displays.The default (preset) time and date format that displays depends on your carrier. You can accept the default format or select an alternate format. 5. Press s until you see the Time Format screen. 6. Do one of the following: • To use the 12-hour format, go to the next step. • To use the 24-hour format, select “24hr”. See Table 2 on page 24. 7. Press s until you see the Date Format screen. 8. Do one of the following: • To use the MM/DD format, select “Exit”. • Or to use the DD/MM format, select “DD/MM”. See Table 3 on page 24. 9. Select “Exit”. The Ready screen for each mode (Phone, Group, and Private) now displays the selected time and date formats.Changing the Display LanguageYou can customize your i2000plus phone to display one of four languages: English, French, Spanish, or Portuguese. You can manually select one of these languages or have your SIM select it for you (Automatic).To change the displayed language: 1. From the Phone Ready screen, press n until you see the “Prgm” menu option. 2. Select “Prgm” 3. Press 7, 0.71=Time/Exit OkDateTime/DateDisplay:OnExit OffTime Format:12 HourExit 24hr Exit DD/MMMM/DDDate Format:

26www.motorola.com 4. Select “Ok”. 5. Press s to scroll through the language options. Selecting “Exit” at any time retains the current language selection. 6. When the desired language appears on your display, select “Ok”. The displayed text immediately changes to the selected language. 7. Select “Exit”. The language that you select will be the displayed language. Selectable Backlight TimerYour Phone’s backlight is what illuminates the display when you, for example, first receive or make calls. Through your Programming Menu. 1. Press n until you see “Prgm” on the display. 2. Select “Prgm”. 3. Select 1, 6. 4. Select “Ok”. 5. Press s to scroll through the backlight timer options.When the desired backlight timer period appears on your display, select “Ok”. The backlight timer value immediately changes to the selected value.70=LanguageAutomatic Exit OkLanguageEnglish OkCancl70=LanguageEnglish OkExit

Making Phone Calls27MAKING PHONE CALLSIn addition to making and receiving phone calls in Phone mode, you can use the speakerphone, set vibration alerts, forward calls*, use call waiting*, put calls on hold, use three-way calling*, and create and use stored lists. Phone Ready is the main screen. You can also have an optional, alternate line on your i2000plus phone (iDEN systems only). Your alternate line will have its own unique number so that you can designate special use for each line.You can place a call by entering the phone number on the keypad. 1. From the “Phone Ready” screen, using the keypad, enter the desired number.If you make a mistake, press l once to move back one digit, or select “Cancl” to start over. 2. Press e to place the call. 3. To end the call, press e.International Phone Calls Using Plus DialingPlus Dialing enables you to place an International call from any country -- without entering the local international access code.To make an international phone call, press and hold 0 before dialing the number. After about two seconds, the international dialing prefix + appears in the display. This allows you to call from any country without knowing the local international access code.Inserting Pauses into Phone NumbersTo add a three-second pause character to a phone number, press and hold * for two seconds where you want the pause. The pause symbol (P) will appear.Using Other Dialing MethodsTo use Scroll, Speed Dial, or Name Search, names and numbers must be programmed in your phone. See “Creating, Editing, and Using Stored Lists” on page 44.* Network and subscription dependent feature. Not available in all areas. Phone Ready3:15p 08/21Name Mail(System Name)

28www.motorola.comScroll 1. From the Phone Ready screen, press s to scroll backward or forward through your stored list of numbers and names. 2. Press e to place the call. 3. To end the call, press e.Speed Dial 1. From the Phone Ready screen, press n until you see the “Spd#” option on the last line of your display. 2. Select “Spd#”. 3. Enter the assigned speed-dial number (1-100). You will see the stored name and phone number associated with the speed-dial number. 4. Press e to place the call. 5. To end the call, press e.Name Search 1. From the Phone Ready screen, select “Name”. 2. Using the keypad, enter the first letter of the desired name. For example, to search for the name Bob: a. Enter “B” by pressing 2 twice.b. Press s to scroll through all the names starting with “B” until you see “Bob”. 3. Press e to place the call. 4. To end the call, press e.Last Number RedialTo redial the last number that you called, press and hold e for 2 seconds.Turbo Dial®Turbo Dial feature enables you to quickly place a phone call by simply pressing and holding the numeric key on the keypad that corresponds to the stored entry in your Phone list directory. There are nine Turbo Dial key positions, 1 through 9. NOTE If you are in a Phone call, place the call on hold before using Turbo Dial.

Making Phone Calls29From the Phone Ready screen: 1. Select one of the first nine entries in the Phone list using key numbers 1 through 9. For example, press 1 for speed dial #1. Keypad number 0 is not available for Turbo Dialing. 2. Press and hold the desired key for two seconds to activate Turbo Dial. The phone begins to dial the number and “Phone Ready” changes to “Phone-In Use”.Automatic RedialIf you receive a “System Busy, Try Later” message, press e to have your phone automatically redial the number. You will hear a ring-back tone when the call is successful.Emergency DialYou may choose to store any phone number, including 911 for emergencies in the US and 112 for emergencies in Europe, in any of the Turbo Dial keys (1-9). Should you decide to program any of the Turbo keys as 911, the phone will treat the call accordingly. See “Turbo Dial®” on page 28 to learn how to program phone numbers as Turbo Dial keys. 1. From any mode (Phone, Private, or Group), press and hold 9 for two seconds until the phone displays “EMERGENCY”. The phone then automatically dials the emergency number. 2. To end the call, press e. The emergency phone number will not be saved as the last number dialed.Hands-Free SpeakerphoneThe i2000plus phone provides the convenience of a speakerphone for holding impromptu meetings or listening to your voice mail messages. During speakerphone operation, you may either speak or listen, but you cannot do both at the same time.NOTE If you have enabled the keypad lock feature, you must unlock the phone’s keypad before any call can be made, including 911 emergency calls. For more information please contact your service provider.Phone Ready1CanclPhone-In UseVoice Mail 3Way Spkr12:45p 10/18

30www.motorola.comTo use the speakerphone: 1. Select “Spkr” soft key. The “Spkr” option flashes while the speakerphone is on. Or, press k while in a phone call. 2. Place the phone 15-30 inches (380-760 millimeters) away from you. In a noisy environment, you may want to move the i2000plus phone closer to you for better transmission.Receiving a Phone Call 1. Press e or press any numeric key(0 through 9). 2. To activate the speakerphone, select “Spkr” soft key, or press k . 3. To end the call, press e.Missed Call Indicator Your i2000plus phone notifies you of received, but unanswered phone calls. If you subscribe to Caller ID through your service provider, the caller’s phone number is stored in your Last 10 Calls Received list. Your screen displays a flashing message, for example, “2 Rcvd Calls”, with the number of missed calls. Press any key to clear the flashing indicator.NOTE If there is background noise in your area, you may have difficulty hearing a caller’s voice or messages. To resolve this problem: 1. Press n until you see the “Mute” menu option. 2. To listen, press o under “Mute”. The display changes from “Phone In Use” to “Phone -MUTE”, indicating that the microphone is muted. 3. To speak, press o under “Mute” again. The display changes from “Phone Mute” to “Phone In Use”, indicating that the microphone is on.While the microphone is muted, you can hear incoming audio, but a caller cannot hear any speech coming from your i2000plus phone. Incoming Phone Call SpkrEndPhone Ready(System Name) MailName2 Rcvd Calls

Making Phone Calls31To retrieve the missed calls: 1. From the Phone Ready screen, press n. The menu options change to “Calls” and “Prgm”. 2. Select “Calls”. The Rcvd Calls screen opens with the number, time, and date of the last call that you received. 3. Scroll to continue viewing the list.What Is My Phone Number?From the Phone Ready screen, press n until you see the “Prgm” menu option.Select “Prgm”.Press 1 to display your own phone number. VibraCall® AlertVibraCall alert is a vibration system that notifies you of incoming Messages, Phone, Private, and Group calls. You can set a vibration alert for all services or for individual services. The alert choices are: • Vibe All—produces a vibration alert for all incoming calls and messages.• Phone Vibrate—produces a vibration alert for incoming phone calls.• Phone Vibrate/Ring—produces a vibration alert followed by a ring tone for phone calls.• Mail Vibe—produces a vibration alert for mail messages.• Group/Prvt Vibe—produces a vibration alert for incoming group and private calls.NOTES When you set vibration alerts, they are set only for the current line. If you have a second phone line, you must select that line and repeat the procedure for selecting all services or selecting individual services to vibrate.Phone Ready (System Name)PrgmCalls10:42a 11/06Rcvd Calls1=555222210:42a 11/06Cancl Store1 =Own Ph#9545553434 Exit Edit

32www.motorola.com Selecting VibraCall Alert for All Incoming Calls and Mes-sagesTo set a vibration alert for all incoming calls and messages: 1. Press q once and a “VibeAll: On” message displays briefly. 2. Select “All”. You will receive a brief vibration alert.After you set the alert, the display returns to the previous mode and q (the Vibrate All icon) appears at the top of your display.Selecting VibraCall Alert for Individual ServicesTo set a vibration alert for specific phone or mail services: 1. From the Phone Ready screen, press n until you see the “Prgm” menu option. 2. Select “Prgm” 3. Press 9. 4. Press n until you see the “Selct” menu option. 5. Select “Selct”. The first choice is Phone Vibrate. To view the Vibe/Ring vibration alert choices, press n on the keypad.NOTE If VibraCall alert is set for incoming calls and messages, the power-up sequence includes a brief vibrate cycle.Name Mail Phone Ready(System Name)10:54p 12/09 10:54p 12/09(System Name)Phone ReadyName Mail9=VibrateAlert:OffExit All Alert:OffSelct9=Vibrate

Making Phone Calls33 6. To view other choices, press s. • To receive vibration alerts only for Mail, select “Mail Vibe”, then select “On”. • To receive vibration alerts for Group and Private calls, select “Group/Prvt”, then select “On”. 7. Select “Exit” to return to the Vibrate Alert menu. 8. Select “Exit” again to return to the previous mode. Setting the Ringer VolumeYou can adjust the ringer volume for incoming calls. If you have a second phone line, you must set each line separately. Be sure to select the desired line before setting the volume. 1. From the Phone Ready screen, press n until you see the “Prgm” menu option. 2. Select “Prgm” 3. Press 3, 0. The “30=Ringer Vo l u m e ” screen displays.The display shows your current ringer volume. 4. Press the Volume Control buttons on the side of the phone to listen as you raise or lower the volume. At the lowest setting, the screen displays “Volume Silent”. 5. When you reach the desired level, select “Exit”. Selecting a Ring StyleYour phone has nine selectable ring styles. Phones with two phone lines can use the same or different ring styles for each phone line. Setting a Ring Style 1. From the Phone Ready screen, press n until you see the “Prgm” menu option. 2. Select “Prgm” 3. Press 3, 1.The display shows your current ring style.Vibrate:Vibrate OffExit Vibe Phone:Group/PrvtVibe:Off Exit On Exit 30=RingerVolume31=Set RingStyle:1 OkExit

34www.motorola.com 4. Select “Ok”. 5. Press s to scroll through the available Ring Styles. 6. To listen to the selected ring style, press the Volume buttons on the side of the phone. 7. Select “Ok” to select the Ring Style shown. To leave the ring style unchanged, select “Cancl” 8. Select “Exit”.Setting a Ring Style for the Alternate Line 1. From the Phone Ready screen, press n until you see “Line2”. 2. Select “Line2”. 3. Repeat the procedure for "Setting a Ring Style", above.Ring Style 4 Ok Cancl

Additional Call Services35ADDITIONAL CALL SERVICESCall ForwardingCall forwarding lets callers reach you by forwarding incoming calls to a designated number. You have two options: forward all incoming calls (unconditional) or select those circumstances (conditional) when you want your calls forwarded. Unconditional Call ForwardingUnconditional call forwarding sends all incoming calls to the designated number. 1. From the Phone Ready screen, press n until you see “Forwd” on the last line of the display. 2. Select “Forwd”. 3. To select the number where you want your calls forwarded, do one of the following: • Enter a number. • Or, press the scroll keys to select a number from your stored list. 4. Select “On”. 5. After the “Please Wait” message displays, select “Exit”.Notice that the Call Forward icon z appears on your display when Unconditional Call Forwarding is set. NOTE These additional call services are network dependent or subscription dependent, and may not be available in all areas. Contact your service provider for more information.NOTE When you set unconditional call forwarding, your phone does not ring.Phone Ready(System Name)Forwd Spd# 9:06a 09/03 Forwd:OffTo:5551212Exit On

36www.motorola.comConditional Call ForwardingYou may want to forward your calls when your i2000plus phone is: • Busy on another call • Not answered (NoAns) • Outside the service area (NoRch). 1. From the Phone Ready screen, press n until you see “Forwd” on the last line of your display, then select it. 2. Press n once again until you see “Busy” and “NoAns” on the last line of your display. • To forward your calls when your phone is in use, select “Busy”. • To forward your calls when you do not want to answerthem, select “NoAns”. 3. Press n again until you see “NoRch” and “Rcl#”. • To forward your calls when you cannot be reached, select “NoRch”. • To see the call forward number, select “Rcl#”. 4. After you select the call forward option, either enter the number where you want your calls to be forwarded, or press the scroll buttons and select a number. 5. Select “On”. 6. Select “Exit”.You can set more than one condition by repeating steps 1 through 6.NOTE You must turn off Unconditional Call Forwarding before you can set Conditional Call Forwarding options.Phone Ready(System Name)Forwd Spd# 9:06a 09/03Forward:OffTo:Busy NoAnsForward:OffTo:NoRch Rcl#

Additional Call Services37Call WaitingUsing the Call Waiting feature, you can answer an incoming call when you are on another call. Call Waiting is on unless you turn it off for a particular call. 1. After the alert tone, your display shows the incoming number and asks “Accept Call?” (if you have Caller ID). To accept the call, select “Yes”. To decline the call, select “No”. 2. Press n, then select “Hold” to place the second call on hold and return to the first call. Selecting “Hold” switches you between the two calls. 3. To end the active call, press e. Call HoldWhen you are on a call, you can place the call on hold and make a second call. 1. To place the active call on hold, press n, then select “Hold”. You may then answer or place another call. 2. To remove the call from hold, press n, then select “Hold” again.The options “3way” and “Spkr” appear only when you are on an active call.3-Way CallingIf your carrier provides 3-way calling, you can combine two ongoing phone calls into one conversation. This option is available only when you initiate the second call.After you place or receive a phone call: 1. Select “3way”. This action places the current call on hold. 2. Enter the phone number for the second call and press e. 3. When the second call is connected, select “3way” to join the calls. Both phone numbers and “3way” appear on your screen. 4. To end the 3-way call, press e.5551212 No Yes Accept Call?Call 1-Hold5551212SHold SpkrPhone-In Use555121211:40p 05/083Way Spkr

38www.motorola.comCall BarringIf your carrier provides Call Barring, you can prevent incoming and outgoing calls on your i2000plus phone. Press s to view the call barring choices (incoming, outgoing, and recall status). See the following procedures for each.Barring Incoming CallsYou can choose to bar:• When Roaming—blocks all incoming calls while you roam away from your home system.• All Calls—blocks all incoming calls.Press the n to view the incoming call barring choices. See the following procedure. 1. From the Phone Ready screen, press n until you see the “Bar” menu option.The time, date, and menu option, “Line2”, do not appear in GSM. 2. Select “Bar”. The “Call Barring Incoming” screen displays. 3. Select “Ok”. The “Bar Incoming:Off” screen displays. 4. Do one of the following: • To leave the incoming call barring as shown (in this example, off), select “Exit”. • To see other barring options, press n. • Or, to bar all incoming calls, select “All”. At this point, you are requiredto enter your passcode. 5. Enter your call barring passcode and select “OK”.Phone ReadyBar Line2(System Name) 2:12p 09/03Call BarringExit OkIncomingBarExit AllIncoming:Off Enter Bar Cancl Ok Passcode****

Additional Call Services39Barring Outgoing CallsYou can choose to bar:• International Calls—blocks all outgoing international calls.• International Calls except Home Country—blocks all outgoing international calls except to your home country.• All Calls—blocks all outgoing calls.Press n to view the outgoing call barring choices. See the following procedure. 1. From the Phone Ready screen, press n until you see the “Bar” menu option.The time, date, and menu option, “Line2”, do not appear in GSM. 2. Select “Bar”. The “Call Barring Incoming” screen displays. 3. Press s once. The “Call Barring Outgoing” screen displays. 4. Select “Ok”. The “Bar Outgoing:Off” screen displays. 5. Do one of the following: • To leave the outgoing call barring as shown (in this example, off), select “Exit”. • Or, to bar all incoming calls, select “All”. At this point, you are requiredto enter your call barring passcode and select “OK”. 6. To access the “Intl” menu option, press n. 7. Do one of the following: • Select “All” to bar all outgoing international calls. • Or, press n again to select “xHome” to bar all outgoing calls except to your home country.Phone ReadyBar Line2(System Name) 2:12p 09/03Call BarringExit OkOutgoingBarExit AllOutgoing:Off Enter BarPasscodeCancl Ok *****

40www.motorola.comViewing Call Barring StatusTo view the Call Barring status: 1. From the Phone Ready screen, press n until you see the “Bar” menu option.The time, date, and menu option, “Line2”, do not appear in GSM. 2. Select “Bar”. The “Call Barring Incoming” screen displays. 3. Press s. The “Call Barring Outgoing” screen displays. 4. Press s again. The “Call Barring Recall Status” screen displays. 5. Select “OK”. At this point, you are now required to enter your passcode then select “OK”. Next, the “Please Wait” message displays.If you enter the wrong passcode, the “Wrong Bar Passcode” message displays then the “Enter Bar Passcode” screen displays again. Carefully re-enter your passcode. It must be between 4 and 8 digits. 6. After the “Please Wait” message, the “Call Bar Incoming” Status screen displays. Do one of the following: • To view only the Call Bar Incoming status, select “OK”. • To view the Call Bar Outgoing status, press s, then select “OK”.Changing Your Call Barring PasscodeTo change your call barring passcode: 1. From the Phone Ready screen, press n until you see the “Prgm” menu option.The time, date, and menu option, “Line2”, do not appear in GSM. 2. Press 4, 8. The “48=Change Bar Passcode” screen displays. 3. Select “OK”. The “Old Code?” screen displays. 4. Enter your current passcode then select “OK”. The “New Code?” screen displays.Phone ReadyBar Line2(System Name)Call BarringExit OkRecallStatus Enter BarPasscodeCancl Ok***** 48=ChangeBar PasscodeExit Ok

Additional Call Services41 5. Enter your new passcode then select “OK”. 6. At the “Repeat Code” screen, enter your new passcode again then select “OK”. Be sure to record your new passcode and store it in a safe place.Alternate Phone Line (iDEN Only)If your phone is activated with two phone lines, you can switch between them. To change phone lines, your phone must be at the Phone Ready screen. The following settings are independent for each phone line. When you enable a setting, it applies only to the active line. • Ringer Volume • Auto Answer • One-minute Beep • Automatic Display Timer • Resettable Timer • Total Call Timer • Selectable Ring Styles • Call ForwardingSetting the Active LineAt the “Phone Ready” screen: 1. Press n until you see “Line2”. (If you are on Line 2, you will see “Line1”.) 2. Do one of the following: • Select “Line2” to activate Line 2 when Line 1 is the active line. • Or, select “Line1” to activate Line 1 when Line 2 is the active line. Outgoing calls will be made on the selected line. Receiving a Call You can receive calls on either line, regardless of the active line setting.• If you receive a call on the currently active line, that icon simply flashes.• If you receive a call on the line that is not currently active, the active line icon remains lit and the alternate line icon flashes.Phone Ready(System Name)Line2 11:48p 08/21Line2

42www.motorola.comReceiving a Call on Your Alternate Line 1. Select “Yes” to answer the call on the other line. Your previous call will be placed on hold. 2. Do one of the following: • To end the call, press e. • Or, to place the current call on hold, or to toggle between calls, press n, then select “Hold”.When the call ends, the phone remains active in the last active line selected.Phone Only Mode (iDEN Only)If your carrier provides this option, you can turn off Private and Group services. You can still make and receive phone calls and receive Message Mail.Placing the phone in Phone Only mode increases the standby battery life. Make sure that the LED is blinking green, which indicates that you are in a coverage area.To turn on Phone Only mode: 1. From the Phone Ready screen, press n until you see the “Prgm” menu option. 2. Select “Prgm” 3. Press 8, 0. 4. Select “On”. 5. Select “Exit”.3055551212Take CallOn Line 2? No Yes12 Exit On 80=PhoneOnly:Off 80=PhoneOnly:OnExit Off

Additional Call Services43The “Phone ONLY” message displays. Group call and Private call services are now suspended.To restore all services: 1. From the Phone ONLY screen, press n until you see the “Prgm” menu option. 2. Select “Prgm” 3. Press 8, 0. 4. Select “Off”. 5. Select “Exit”. The display returns to Phone Ready.All services are now available.Phone ONLY 2:12p 07/21Name Mail(System Name)80=PhoneOnly:OnExit Off 80=PhoneOnly:OffExit On

44www.motorola.comCREATING, EDITING, AND USING STORED LISTSA stored list is a directory of phone numbers and Private IDs and their related names. Stored lists are convenient because you do not have to remember names and numbers—you simply scroll through your stored list. Combined Phone Number and Private ID List You can set a combined Phone and a Private ID with the associated name, which eliminates the need to program the Private ID separately. You can add up to 100 numbers to your Phone list, store them with names, and assign them to speed-dial numbers. Entering Numbers To enter a number, press the corresponding key on the keypad.Entering International Phone NumbersTo enter an international phone number, press and hold 0. After about two seconds, the international dealing prefix + will appear in the display. This allows you to call from any country without knowing the local international access code.Pre-Pend FeatureThe Pre-Pend feature allows you to add Plus Dialing to your already stored phone numbers. By adding the “+” to your already stored numbers, your phone will add the local international access code needed to place an international call. By using the Pre-Pend feature, you can automatically add the “+” without having to re-enter the stored number. Though you must always first add the “+”, you can also add other digits in addition to the “+”. For example, you might want to add an area code if you don’t already have it stored as part of the phone number. Or, you might want to add a Pause and another series of numbers such as a personal identification number (PIN) or password. See “Inserting Pauses into Phone Numbers” on page 45 for more information. The maximum number of digits is 20.To add a “+” to an already stored phone number: 1. Press n until you see “Prgm” on the display. 2. Select “Prgm”. 3. Select “Ok”.21=PhoneList EditExit Ok

Creating, Editing, and Using Stored Lists45 4. Press s to scroll to Programming Menu Option 21, or just enter the number of the Option. 5. Select Ok 6. At the Edit Entry screen select Ok 7. Scroll to the entry to be edited and select OkA flashing cursor displays under the first digit of the entry. 8. Press and hold 0 until the screen changes to the Insert screen. 9. Select Store to store the number with the inserted “+”. Select Cancl to return to the Edit Entry screenYou now have the option to change the alias or name of this entry if you do not want to save over the currently stored entry, in this example “Home”. 10. Select Store to save over the already existing entry name. To change the existing name, type in the new name and select Store.You now have the option to change the Speed Dial location of this entry if you do not want to save over the currently selected location number, in this example 2. 11. Select Store to save over the already assigned Speed Dial location. To change the location, type in the new Speed Dial location number and select Store.Inserting Pauses into Phone NumbersTo obtain a three-second pause character in a phone number, press and hold * for two seconds. The pause symbol (P) will appear.EditEntry? Exit Ok Edit Entry2=HomeExit Ok Edit Number9545551234Cancl Store Insert+9545551234Cancl Store Edit NameHomeExit Store

46www.motorola.comEntering NamesTo enter a letter, press the key the required number of times, which is related to the letter’s position on the key. Table 4 describes how to enter each letter on 7. To shift to lowercase letters, press and hold # after a letter is entered. Storing Names and Numbers 1. Press n until you see the “Prgm” menu selection. 2. Select “Prgm”. 3. Press 2, 0. 4. Select “Ok”. The next screen briefly displays the remaining number of phone numbers and private IDs that you can store. 5. Enter the name that you wish to store. 6. Select “Store”.See Figure 2 for an example of entering a name.Table 4: Entering Letters and Numbers on the Keypad To enter: Press 7P once.Q twice.R three times.S four times.7 five times.20=Phone/Prvt ListExit OkAvailable98 Phone #3 Prvt IDsEnter NameExit Store_

Creating, Editing, and Using Stored Lists47Figure 2. Entering a Name 7. Enter the phone number that you want to associate with this name and select “Store”. To skip the Phone Number entry, select “Skip”. You will go directly to the “Enter Prvt ID Number” screen.The next screen displays the name that you entered and a flashing speed-dial number where the entry will be stored. 8. Do one of the following: • To accept the speed-dial number shown, select “Store”. • To change the speed-dial number, enter the desired speed-dial number. The speed-dial number stops flashing. 9. At the next screen, enter the Private ID number associated with the name that you entered then select “Store”. To skip the Private ID number entry, select “Skip”.Editing and Erasing Phone List Entries 1. Press n until you see the “Prgm” menu selection. 2. Select “Prgm”. 3. Press 2, 1. 4. Select “Ok”. The “Edit Entry?” screen displays. 5. Do one of the following:a. To edit an entry, select “Ok”. (1) At the “Edit Entry” screen, press s until the desired EXAMPLETo store the name “TIM”: 1. Enter “T” by pressing 8 once. 2. Enter “I” by pressing 4 three times. 3. Enter “M” by pressing 6 once. Skip StoreEnter PhoneNumber_TIMSpd#=3 Cancl StoreEnter PrvtID Skip Store

48www.motorola.comentry appears, then select “OK.(2) At the “Edit Number” screen, edit the phone number, if you wish, then select “Store”.(3) At the “Edit Name” screen, edit the name, if you wish, then select “Store.(4) At the “Edit Spd#” screen, edit the speed number, if you wish, then select “Store”.b. To erase an entry:(1) At the “Edit Entry” screen, press s. (2) At the “Erase Entry” screen, select “Ok”.(3) Scroll to the desired entry, then select “Ok”. At the “Erase?” screen, select “Yes”. 6. Select “Exit” to close the Phone List Edit screen.Editing and Erasing Private ID List Entries 1. Press n until you see the “Prgm” menu selection. 2. Select “Prgm”. 3. Press 2, 2. 4. Select “Ok”. The “Edit Entry?” screen displays. 5. Do one of the following:a. To edit an entry, select “Ok”. (1) At the “Edit Entry” screen, press s until the desired entry appears, then select “OK.(2) At the “Edit ID” screen, edit the number, if you wish, then select “Store”.(3) At the “Edit Name” screen, edit the name, if you wish, then select “Store.b. To erase an entry at the “Edit Entry?” screen, press s once, then select “Ok”. Press s to scroll to the desired entry, then select “Ok”. At the “Erase?” screen, select “Yes”. 6. Select “Exit” to close the Private ID List Edit screen.Last 10 Calls Received and Sent ListsYou can view, dial, and store the list of the last ten phone numbers received and the last ten phone numbers dialed.

Creating, Editing, and Using Stored Lists49 The most recent call sent or received appears first in your call list.From the Phone Ready screen: 1. Press n. The menu options change to “Calls” and “Prgm”. 2. Select “Calls”. The Rcvd Calls screen opens. If the “Store” option appears, the number currently displayed is not in your Phone list. To add the number to your list, select “Store”.If you want to see the Sent list but the “Store” option is on your display, press n until you see the “Sent” menu option. 3. Do one of the following: • To view the Calls Received list, use s to view each entry.If the “Store” option is on your display, press n until you see the “Sent” menu option. • Or, to view the Calls Sent list, select “Sent”. Use s to view each entry. 4. To view the Calls Received list again, select “Rcvd”. 5. To close the Calls list, select “Cancl”.Quickstore of Phone Numbers If you subscribe to your carrier’s Caller ID service, you can use Quickstore to store the last number that you dialed or quickly store a NOTE You need Caller ID service from your service provider to see the received list. Not available in all areas.Phone Ready(System Name)Calls Prgm12:55p 10/18 Rcvd Calls1=5554444Cancl Store12:55p 10/18Cancl StoreRcvd Calls2=MAILBOXCancl Sent12:56p 10/18Sent Calls1=JOHNCancl Rcvd12:56p 10/18

50www.motorola.comnumber from the Last 10 Calls Received and Sent Lists without having to enter the programming menu.To use Phone Number Quickstore, from either the Phone Ready screen or from the Last 10 Calls Received or Sent List: 1. Do one of the following: • To go to the last call that you dialed, press s. • To view the Received and Sent Calls list,press n until you see “Calls”, then select it. 2. Select “Store”. The Enter Name screen displays. 3. Enter the name then select “Store”.The combined name and number entry is stored in the first available storage space.The Stored message displays with the name that you stored. NOTE As you scroll through the Last 10 Received or Last 10 Sent Calls List, only the name displays. If the name is not available, the phone number displays.Phone Ready(System Name)Name Mail12:43p 01/14Phone Ready0=5554455Cancl StoreEnter Name_Cancl StoreJOHN5551212Stored

Traveling Between Systems51TRAVELING BETWEEN SYSTEMSWhen you travel, you may have to change the phone system setting. You can choose from six phone system settings:• Last active—useful when you move between iDEN and GSM systems that do not overlap, for example, traveling between New York and Paris. If your i2000plus phone cannot locate the last system, for example, iDEN, it attempts to locate the other system, GSM. • Roam—useful when you are in an overlapping system-coverage area and have no preference for either system. This selection causes your i2000plus phone to switch between iDEN and GSM until it finds an acceptable network.• iDEN preferred—useful if your home system is iDEN and you are in a country or region where GSM coverage is also available. Your i2000plus phone always searches first for iDEN networks.• iDEN only—useful when you are in an area that is covered by iDEN and GSM, but you want to use iDEN. Your i2000plus phone attempts to register only on iDEN networks.• GSM preferred—useful if your home system is GSM and you are in a country or region where iDEN coverage is also available. Your i2000plus phone always searches first for GSM networks. • GSM only—useful when you are in an area that is covered by iDEN and GSM, but you want to use GSM. Your i2000plus phone attempts to register only on GSM networks.To reselect the phone system: 1. Press n until you see the “Prgm” menu option. 2. Select “Prgm”. 3. Press 5, 5, then select “OK”. 4. Press s until you see the desired system. 5. Select “OK”. Searching for a Network While you are on a GSM network, you can perform an automatic or manual search for available networks. A manual search allows you to view the available networks and make a selection rather than use the network automatically selected by the phone.55=Phone SysExit OkiDENPreferredPhone SystemCancl OkLast Active

52www.motorola.com 1. Press n until you see the “Prgm” menu selection. 2. Select “Prgm”. 3. Press 5, 7. 4. Select “OK” 5. At the “57=GSM Network Search” screen, do one of the following:• Select “OK”.• Or, press s. At “Manual Search”, select “OK”. Then press s to scroll through the network choices. The network choicesappear in the following order: Home,Preferred, Available.Storing Your Preferred List of Networks You can add, edit, or erase your preferred list of networks. 1. Press n until you see the “Prgm” menu selection. 2. Select “Prgm”. 3. Press 5, 8. 4. Select “OK”. The “Add New Entry?” screen displays. 5. At the “Add New Entry?” screen, select “OK”. This selection opens a network screen. 6. Do one of the following: • To add this network, select “Ok”. • Or, to exit this screen without adding this network, select “Cancl”. NOTE From the “Add New Entry?” screen, you may press s to go to the “Edit Entry” or “Erase Entry?” screen. Press s to view the network choices for each screen. 57=GSMExit OkNetwork Search58=GSMExit OkNetwork ListAdd NewCancl OkEntry?Cancl Ok234 10 UKAvailable UK Cellnet

Traveling Between Systems53 • Or, press s to view or enter another available or known network. At the desired network screen, select “OK”.Selecting “OK” adds the displayed network to your preferred network list. 7. At the preferred network screen, for example, UK Cellnet Pref#=_, assign a number, 1 through 8, to the network name. The number that you assign provides the priority in which the phone looks for the systems when it is scanning the preferred list of networks. 8. Select “Store”. Storing New Networks to Your Known ListYou can add new network names and network codes to your known list.This is useful if your carrier adds new roaming partners. 1. Press n until you see the “Prgm” menu selection. 2. Press o under “Prgm”. 3. Press 5, 6. 4. Press o under “OK”. The “Add New Entry?” screen displays. NOTE You can assign numbers 1 through 8 to your preferred network names. However, if you assign a new network name to a number that already has a stored network name, you will erase the stored name.NOTE Once you have added one new network name and network code to your known list, you also have the option to edit or erase these names and codes.UK CellnetCancl StorePref#=_56=GSM Exit OkNetwork NameAdd New Cancl OkEntry?

54www.motorola.com 5. At the “Add New Entry?” screen, press o under “OK”. The “Enter Code” screen appears. 6. Enter your five- or six-digit code. 7. Press o under “Store”. The “Enter Name” screen then appears. 8. Enter the network name. 9. Do one of the following: • To add this network, press o under “Store”. • Or, to exit this screen without adding this network, press o under “Cancl”. Selecting “Store” adds the displayed network to your known network list.Enter CodeCancl Ok_

Making Private Calls (iDEN Only)55Making Private Calls (iDEN Only)MAKING PRIVATE CALLS (iDEN ONLY)A Private call is a one-to-one conversation between two people. In Private mode, each i2000plus phone is identified by a name or a number called a Private ID.To make a Private Call: 1. Press m until you see “Prvt Ready” on your display. 2. Use the keypad to enter the Private ID of the person that you want to reach. 3. To speak, press and hold the PTT button, wait for the chirp, then speak into the microphone. 4. To listen, release the PTT button.To use Scroll or Name Search, you must have a Private ID list.Scroll 1. Press m until you see “Prvt Ready” on your display. 2. Press s to scroll through the stored Private ID list. 3. Press and hold the PTT button, wait for the chirp, then speak into the microphone.Name Search 1. Press m until you see “Prvt Ready” on your display. 2. Select “Name”. 3. Press the key with the first letter of the name you are searching for. 4. Press s to scroll through other stored names associated with the letter you entered. 5. Press and hold the PTT button, wait for the chirp, then speak into the microphone.Receiving a Private CallWhen you receive an incoming Private call, you hear a brief chirp-like tone. Your i2000plus phone automatically switches to Private mode, and the Private ID or the name of the caller displays. 1. Your phone must be idle, that is, not busy in an active call. 2. Wait for the caller to finish speaking. 3. Press and hold the PTT button. Begin speaking after you hear the chirp.Prvt ReadyJOHN SMITHCancl

56www.motorola.comPrivate/Group Mode SpeakerYou can hear Private calls through either the earpiece or the speaker. Press k on your i2000plus phone to turn the Private/Group Mode Speaker on or off.•With the Speaker on, you will hear incoming calls through the speaker.•With the Speaker off, you will hear incoming calls through the earpiece.Call AlertCall Alert enables you to page an individual by sending an audible tone. A Call Alert allows the individual to respond at a later time. The alert plays intermittently until the individual clears it.Sending a Call Alert 1. Press m to go to the “Prvt Ready” screen. 2. Select “Alert”. 3. Enter the Private ID, or press s to scroll to the desired name. You may also select the name by pressing n and using Name Search. 4. Press the PTT button.Receiving a Call AlertWhen you receive a Call Alert, you will hear an alert tone and see a message on your display.•To answer the Call Alert, press the PTT button.•To clear the Call Alert without answering it, select “Clear”.•To silence the Call Alert without clearing it, press any key other than the PTT button.NOTE Until the Call Alert is cleared or returned, the alert plays intermittently and you will not be able to receive any additional Phone, Private, or Group calls but you can receive additional call alerts.Prvt ReadyJOHNAlert NameExit QueueJOHNAlert

Making Private Calls (iDEN Only)57Call Alert QueuingIf your carrier provides Call Alert Queuing, you can save up to eight Call Alerts in a queue for later use.After you respond to the Call Alert, it is removed from the queue.Clearing or Queueing a Call AlertWhen you receive a Call Alert, do one of the following:•To clear a Call Alert, select “Clear”.•To place the Call Alert into the queue, select “Queue”. Pressing m also queues the Call Alert.If you receive multiple Call Alerts, the last received Call Alert displays and the remaining Call Alerts are stacked at the beginning of the queue.Responding to a Queued Call AlertYou can respond to the Call Alerts in any order. To select a Call Alert for response: 1. Select “Queue”. 2. Press s to scroll to the desired Call Alert. 3. Press the PTT button to respond to the Call Alert.Quickstore of Private IDs Quickstore allows you to quickly store a Private ID without having to enter the programming menu.From the Private Ready screen with the Private ID displayed: 1. Select “Store”. If an ID is greater than 12 characters, the ID wraps to the third line, replacing the time and date.Alert 3JOHN SMITH Clear QueuePrvt ReadyAlert Store12:43p 10/1856781

58www.motorola.com 2. Enter the name associated with the Private ID.Some systems allow you to edit. Please check with your carrier. 3. Select “Store”. The Stored message displays. If the list is full with the maximum 100 names, you will get the message, “Prvt List Full”. You cannot add names until you remove some names from the list. 4. Next, the Prvt Ready screen displays the stored name.Viewing Your Private IDTo view your private ID at any time after you store it: 1. Press n until you see the “Prgm” menu selection. 2. Select “Prgm”. 3. Press 2. The screen displays the message, “2=Own Pvt ID”. The next line displays your Private ID. This is the number supplied by your carrier that you store in your phone. 4. Select “Exit”.Enter Name_ Cancl StoreJOHNStoredPrvt ReadyJOHNAlert Name12:45p 10/18

Making Group Calls (iDEN Only)59Making Gr oup Calls (iDEN On ly)MAKING GROUP CALLS (iDEN ONLY)A Group Call allows you to communicate instantly with members of a selected Talkgroup–a pre-defined set of people who share a communication need.Talkgroups appear on your display as numbers or programmed names, such as Talkgrp10 or Sales Team.To make a Group Call: 1. Press m until “Group Ready” displays. Your most recently used talkgroup displays, for example, “Talkgrp 10”. 2. To place a call, do one of the following:•To speak to this talkgroup, press and hold the PTT button. Wait for the chirp, then speak into the microphone.•To speak to another talkgroup, press s until you see the desired talkgroup name. Press and hold the PTT button.Wait for the chirp, then speak into the microphone. 3. To listen, release the PTT button.Receiving a Group CallWhen you receive an incoming Group call, you will hear a brief chirp-like tone. Your i2000plus phone automatically switches to Group mode, and the Talkgroup name displays. 1. Your phone must be idle, that is, not busy in an active call. 2. Wait for the caller to finish speaking, then press and hold the PTT button. Begin speaking after you hear the chirp. 3. To listen, release the PTT button.You can receive group calls only in the Talkgroups that you have predefined. For more information, see “Adding or Storing a Talkgroup” on Page 59.Adding and Storing a TalkgroupTo add and store a talkgroup name to your i2000plus phone: 1. Press n until you see the “Prgm” menu selection. 2. Select “Prgm”. 3. Press 2, 3. 4. Select “Ok”.Group ReadyTalkgrp 10Alert Mail

60www.motorola.com 5. At “Add New Entry?”, select “Ok”. 6. At “Enter ID”, enter the desired talkgroup number and select “Store”. 7. At “Enter Name”, enter a name for the talkgroup and select “Store”.Area SelectionIn Group mode, you can call only those talkgroup members in a specific location. This is useful when you know where the individuals are located within the service area. 1. Press m until you see “Group Ready” on your display. 2. Press n, then select “Area”. 3. Press s to scroll through the targeted areas specified by your local carrier. 4. Select “Ok” to select the targeted area.Private/Group Mode SpeakerYou can hear Group calls through either the earpiece or the speaker.Press k on the i2000plus phone to turn the Private/Group Mode Speaker on or off.With the Speaker on, you will hear incoming calls through the speaker. This is useful to monitor talkgroup activity in Group mode.With the Speaker off, you will hear incoming calls through the earpiece.

Using Mail Services.61USING MAIL SERVICES.You r i2000plus phone provides the following mail services:• Net Mail• Voice Mail • Message Mail When you receive a new message, the c icon appears and flashes. • To read your new mail immediately, select “Now”. • To read your new mail later, select “Later”.An asterisk * next to a mail service indicates new mail.To use message services, select “Mail” from any Ready screen. The inbox screen opens with your message services listed.To select a message service, scroll to highlight the service or press the corresponding number. For example, to access your Message Mail, press 2. Net MailNet mail alerts you when you receive alerts from the mini-browser, for example, notification of an e-mail or fax.From any mode: 1. Select Mail. 2. Select Net Mail, then select Ok.The Alerts inbox opens and displays the type of Net Mail alerts.NOTE Mail Services are network and subscription dependent features. Not available in all areas.New MailLater NowRead?D 1>Voice MailExit Ok Ok 3>Net MailD 2>Mesg Mail 1>Voice MailExit Ok Ok 2>Mesg Mail*3>Net Maild

62www.motorola.comThe Inbox screen opens. 3. Scroll to the type of alert that you wish to view, then select Ok. 4. To read the message, select View. 5. After you read the message, do one of the following:• Select Menu to view a list of actions that you can take for this message, such as reply, delete, save, and so forth.• Or, select Next to read the next message.Voice MailWhen your i2000plus phone receives a Voice Mail message: • The g icon appears on your display.• The Voice Mail alert tone sounds (if Mail Notification is turned on).• The message, “New Voice Mail Waiting” appears on your display.• An exclamation point (!) on the display indicates that you have at least one urgent message.From any mode: 1. Select “Mail”. 2. Select “VoiceMail”.The Voice Mail inbox opens and displays the number of your new and total Voice Mail messages.To retrieve your voice mail immediately: 1. Select “Dial”. This action automatically places a call to your voice mailbox. The most recent message is retrieved first. 2. To close your voice mailbox, select “Exit”. InboxOk Del 1 Email 2 FaxdInbox:1unreadView Menu1*Lunch2 MEETINGd2>Mesg Mail1>VoiceMailExit OkExit DialVoice Mail 1 New 1 Total

Using Mail Services.63Alert ReceiptThrough your programming menu, you can delay Voice Mail and Message Mail Alerts so that you are not interrupted by the alert tone while on a call. You can choose the following:• Receive All Alerts• Delay All Alerts• Receive Message Mail Alerts onlyTo set your alerts: 1. Press n until you see “Prgm” on the display. 2. Select “Prgm”. 3. Select “Ok”.Press s to scroll to Programming Menu Option 15, or just enter the number of the Option. Message MailMessage Mail can be either a numeric page or a text message of up to 140 characters. Your phone can receive and store 16 mail messages at any time. 1. To postpone reading your mail and to clear the display, select “Later”. The icon stops flashing but remains on your display to remind you that you have unread messages.To read your mail now: 2. To read your mail now, select “Now”. The screen will briefly display the number of new and saved messages in your mailbox. 3. A list of all your messages will be displayed. Highlight the message that you wish to read and select “Read”.To read your mail later: 4. From any mode, select “Mail”. The Mail box opens. 5. Select “Mesg Mail”. Your Message mailbox opens and briefly displays the number of new and saved messages currently in your mailbox.1 Voice Mail2> Mesg Mail>*Exit Ok Message Mail 2 New 0 Saved

64www.motorola.com 6. Next, a list of all messages will display. Select the message that you wish to read and select “Read”. Your display shows the time and date that the sender entered the message into the network. Saving and Erasing MailAfter you read a text or numeric message, you can either Save or Erase the message. Press o under the desired option.Auto Call BackYou can respond to numeric pages and text messages containing a call-back number. To automatically dial a number contained within a Message Mail, press e.Mail Memory FullIf all 16 message registers are full, your phone displays the message “Mail Waiting, Memory Full”. You cannot receive new Message Mail until you empty register space by erasing saved or unread messages. *1>FR: Smith11:15a 04/02Exit Read*2>FR: Jones

Using Your Phone as a Modem65USING YOUR PHONE AS A MODEMYou can use your phone as a modem for data transfer from your laptop, handheld device, or desktop computer. This is particularly useful when there is no wired phone line (wall jack) available.You simply attach an optional data cable to your phone and your computer. From that point, your phone is your modem. This allows you to send or receive time-critical information such as e-mail, a field service report, or files. In addition, you can also send or receive faxes.This type of wireless connection uses one of two types of data connection: circuit-switched data and packet data.• Circuit-switched data is typically used for sending and receiving faxes and for transferring large files.• Packet data is used for small file transfers such as e-mail.To use these services, you must install the optional iDEN Wireless Data Services software. For more information on setting up your computer and your phone for Packet and Circuit Data calls, see the Wireless Data Services User’s Guide and contact your carrier.NOTE Modem features are network dependent or subscription dependent, and may not be available in all areas. Contact your service provider for more information.TTY USERSYou can use your phone and computer in TTY mode. Your computer screen and keyboard replace the standard TTY device. For more information, please see the Wireless Data Services User’s Guide.

66www.motorola.comSETTING PROGRAMMING MENUS You can customize the settings on your phone using the Programming Menu. 1. Press n until you see “Prgm” on the display. 2. Select “Prgm”. 3. Select “Ok”. 4. Press s to scroll to the desired Programming Menu Option or enter the number of the Option. Table 5: Programming Menu Options Keypad Number Menu Option Function 1 Own Ph # Automatically store the telephone number of your phone after you receive the first incoming call (Line1). You can also enter the number and view it. 2 Own Pvt ID Display the Private ID number of your phone. 3 Mail Display:Off Turn on and off the New Mail message that is displayed with incoming Voice or Message mail. 4 Manual Lock:Off Lock your phone to prevent unauthorized use. You must enter a pass code to unlock it. 5 Auto Lock:Off Automatically lock your phone each time it is powered off to prevent unauthorized use. 6 Auto Answer:Off Turn on or off automatic answering of incoming phone calls after 1-4 rings.

Setting Programming Menus67 9 Vibrate Alert:Off Receive a non-audible alert for incoming phone calls and messages. See “VibraCall® Alert” on page 31.10 Last Call Timer Display the duration of the most recent phone call.11 Display Timer:OffTurn on or off automatic display of the Last Call Timer at the end of each phone call.12 Reset Timer Display cumulative airtime of all phone calls since last reset.13 Total Timer Display cumulative airtime of all phone calls.14 1 Minute Beep:OffAutomatically signal each minute of elapsed phone airtime with an audible beep. 15 Alert Receipt Delay Voice Mail and Message Mail Alerts so that users are not interrupted by the alert tone while on a call. Users can choose to: Delay All Alerts; Receive All Alerts; Receive Message Mail Alerts only. See “Alert Receipt” on page 63.16 Selectable Backlight TimerSpecify the duration of the Backlight Timer (10, 20, or 30 seconds).20 Phone/Prvt List Add phone and private numbers in one procedure. See “Combined Phone Number and Private ID List” on page 44.Table 5: Programming Menu Options (Continued)Keypad Number Menu Option Function

68www.motorola.com21 Phone List Edit Edit and erase up to 255 frequently called phone numbers and associated names. See “Editing and Erasing Phone List Entries” on page 47.22 Prvt ID List Edit Edit and erase up to 100 Private numbers and associated names. See “Editing and Erasing Private ID List Entries” on page 48.23 Talkgrp List ProgramAdd/Edit/Erase numbers and associated names for up to 10 pre-programmed talkgroups. See “Adding and Storing a Talkgroup” on page 59.24 Area List Program Add/Edit/Erase numbers and associated names for up to 50 targeted areas.30 Ringer Volume Set the ringer volume using the volume control keys, or lower the volume to silence the ringer. See “Setting the Ringer Volume” on page 33.31 Set Ring Style Select a distinct ring style for incoming phone calls. See “Selecting a Ring Style” on page 33.32 Mail Volume Set the volume of incoming Message Mail and Voice Mail tones using the volume control keys, or lower the volume to silence the mail alert tones.Table 5: Programming Menu Options (Continued)Keypad Number Menu Option Function

Setting Programming Menus6933 Earpiece VolumeSet the default earpiece volume using the volume control keys.34 Keypad Volume Set the volume of the keypad tones using the volume control keys, or to silence the keypad tones.35 Speaker Volume Temporarily adjust the Group/Private Speaker or Speakerphone volume for noisy environments.36 Spkr Vol Set ToneTurn the speaker volume set tones on or off.38 Silent Group Silence all incoming Group call alerts and voice activity. When set, your screen displays the message, Group Silent.40 Change PasscodeChange your secret four-digit passcode from the initial setting 0000.46 Change SIM PINsChange your personal SIM card PIN.47 Require SIM PIN Set or remove PIN requirement when you turn on your i2000plus phone.48 Change Bar PasscodeChange your secret four-digit call barring passcode.55 Phone Sys Set your i2000plus phone for travel by choosing a phone system setting.Table 5: Programming Menu Options (Continued)Keypad Number Menu Option Function

70www.motorola.com56 GSM Network NameAdd, edit, or erase network names and network codes to the known list.57 GSM Network SearchAutomatically or manually search for an available network. (GSM only)58 GSM Network ListAdd, edit, or erase entries in your preferred list. View entries from the known list.60 Set Baud Rate Set the modem baud rate between the phone and the PC. See the Wireless Data Services User’s Guide.61 Data Ring VolumeSet the default data ringer volume using the volume control buttons. See the Wireless Data Services User’s Guide.62 Pgm Data # View your circuit data (fax) number. See the Wireless Data Services User’s Guide.63 IP Address Use the scroll keys to view the Internet Protocol (IP) Address -1 for your mini-browser, as programmed in your phone. If you phone is cabled to a computer, view IP Address-2, the stored IP address of your computer. See the Wireless Data Services User’s Guide.Table 5: Programming Menu Options (Continued)Keypad Number Menu Option Function

Setting Programming Menus71 64 Reset KBytes Tx/RxView the number of Kilobytes sent and received for packet data. See the Wireless Data Services User’s Guide.65 Lines per Screen (mini-browser and Mail menu)View the display in 4 lines, 12 characters or 6 lines, 16 characters.70 Language Select a language for your display text. The default is English. See “Changing the Display Language” on page 25.71 Time/Date Select the format for the time and date display. See “Setting the Time and Date” on page 24.80 Phone Only Turn on or off incoming Private and group services. See “Phone Only Mode (iDEN Only)” on page 42.NOTE Important! Do not perform the following shaded menu options unless you are instructed to do so by your carrier. You could damage your phone.Table 6: Other Programming Menu Options Option NumberMenu Option Function41 Feature Reset Returns all feature settings to their original defaults.42 Master Clear Performs Feature Reset and erases all stored lists.Table 5: Programming Menu Options (Continued)Keypad Number Menu Option Function

72www.motorola.com43 Master Reset Resets the phone’s identification number.44 Change Service KeyChanges or resets the fraud prevention service key.51 Network ID Edits the pre-programmed Network number list and selects roaming options.Table 6: Other Programming Menu Options (Continued)

About Status Messages73ABOUT STATUS MESSAGESYou may receive status messages under certain conditions. Before contacting your carrier, note the message, numeric code, and the conditions under which it appeared. Table 7 lists and describes the error messages. Table 7: Status Messages Status Messages Message DescriptionNumber Not in Service The number that you entered is not valid.User Not Available The party that you called is either busy, out-of-range, or turned off. Please try again later.User Not Authorized The party that you called has not purchased this service.Please Try Later This service is temporarily not available. Please try again later.User Busy in Private The party that you called is busy in a Private call.Service Restricted This service was restricted by your carrier or it was not purchased.Service Not Available This feature is not available on the current network.System Busy Try Later The system is experiencing heavy traffic. Please try again later.Service Conflict This service cannot be enabled because an incompatible service has already been turned on.

74www.motorola.comPlease Try Again An error occurred. Note the error code and try again.Self Check Error A fault was detected with your phone. If this error recurs, note the error code and contact your carrier.Self Check Fail An operational fault was detected with your phone. Note the numeric code, turn your phone off, and contact your carrier immediately. Table 7: Status Messages (Continued)Status Messages Message Description

Accessories75ACCESSORIESLeather Carry CaseThe NTN9247 and NTN9551, leather carry cases with belt clips, allow for easy attachment to a belt or purse. These cases accommodate i2000plus phone travel chargers, audio accessories, car accessories, and all battery types.Batteries Charging Lithium Ion Batteries Table 8 provides the approximate time to fully charge a battery using a Motorola iDEN Approved Lithium Ion battery charger.Table 8: Battery Charging Times * Charging times are based on a fully discharged battery.To find out whether you have the Slim Lithium Ion or Standard Lithium Ion battery, look at the label on your battery. If it reads 500 mAh, then you have the Slim Lithium Ion battery. If it reads 900 mAh, then you have the Standard Lithium Ion battery.NOTE • For best results, charge the batteries within the temperature range of 10oC to 40oC (50oF to 104oF).• Prolonged charging is not recommended. See Table 8 for battery charging guidelines.MOTOROLA BATTERIESKit Number Description/Chemistry Charging Time*NTN8615 Slim Lithium Ion –500 mAh2.5 HoursNTN8614 Standard Lithium Ion –900 mAh3 Hours

76www.motorola.comFor optimal battery life, use a Motorola iDEN Approved Lithium Ion battery charger with your Motorola iDEN Lithium Ion battery. Other chargers may not fully charge your Lithium Ion battery or may yield a reduced number of charge cycles.Battery Operating Instructions• Extreme temperatures will degrade battery performance. Do not store your battery where temperatures exceed 60°C (140°F) or fall below -20°C (4°F).• This Lithium Ion battery has a self discharge rate and without use, will lose about 1% of its charge per day.• The battery capacity will be degraded if stored for long periods while fully charged. If long term storage is required, store at half capacity. • The Motorola iDEN Approved Lithium Ion chargers will provide optimum performance. Other chargers may not fully charge your iDEN Lithium Ion battery or may yield reduced number of charge cycles. • If the battery appears inoperative, the internal protection circuitry may have been activated. Remove the battery from the phone and put it into the charger for several minutes to reset the circuitry.• When batteries are not in use, always store them in the plastic safety tray.Travel ChargerUsing the NPN6197 Travel Charger, you can charge a battery from an AC outlet. On one end of the travel charger, an accessory connector attaches to the bottom of the phone unit. At the other (AC outlet) end of the device, there is a compact housing that contains the plug-in power supply. A lightweight cable connects the two ends (accessory connector and supply).A green LED on the accessory power supply indicates that the Travel Charger is plugged in. Standard Label Slim Label

Hands-Free Car Kit81Hands-Free Car KitThe NTN8656 Hands-Free Car Kit enables in-vehicle communications by providing a built-in speaker, a power supply for the phone’s internal battery charger, hands-free visor microphone, dash-mount holder, and power to the phone.An external Push-To-Talk (PTT) switch is also included. When the phone is turned off, the Hands-Free Car Kit charges the Standard battery in 105 minutes to 90% capacity. Charging time will be longer if the phone is operational during charge timeThe Hands-Free Car Kit is also a charger. Therefore, DO NOT operate this kit and the Vehicular Battery Charger at the same time.NOTE: The use of wireless devices and their accessories (“devices”) may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these devices.!C a u t i o n

84www.motorola.comFigure 8. Installing the Dash Mount HolderUsing the Dash Mount Holder 1. Mount the Dash Mount Holder to the dash of your vehicle by securing the four self-tapping screws to the base of the Holder. Or, for a semi-permanent installation, use a piece of adhesive strip. 2. Snap your i2000plus phone securely into the holder.

Safety and General Information85SAFETY AND GENERAL INFORMATIONRF Operational CharacteristicsYour radio product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automatic signals used to sustain connection to the wireless network, and a receiver which enables you to receive communication and connection information from the network.Exposure To Radio Frequency EnergyYour Motorola Radio Product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy:•United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J•American National Standards Institute (ANSI) / Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1992•Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1999 Edition•National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986 •International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998•National Radiological Protection Board of the United Kingdom, 1995•Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999.•Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 1999 (applicable to wireless phones only)To assure optimal radio product performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures:IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR INTEGRATED MULTI-SERVICE PORTABLE RADIO.

86www.motorola.comPortable Radio Product Operation and EME ExposureAntenna CareUse only the supplied or an approved antenna. Unauthorized replacement antennas, modifications, or attachments could damage the phone and may violate FCC regulations. DO NOT hold the antenna when the radio product is “IN USE”. Holding the antenna affects call quality and may cause the radio product to operate at a higher power level than needed.Phone OperationWhen placing or receiving a phone call, or using the group and private call functions with a Group/Private Speaker OFF (muted speaker icon visible in the display), hold your radio product as you would a wireline telephone. Speak directly into the microphone.Two-way radio operationWhen using your radio product as a traditional two-way radio while making group or private calls with the Group/Private Speaker ON (no speaker icon visible in the display), hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.Body-worn operationTo maintain compliance with FCC RF exposure guidelines, if you wear a radio product on your body when transmitting, always place the radio product in a Motorola supplied or approved clip, holster, case harness, or body harness. Use of non-Motorola-approved accessories may exceed FCC RF exposure guidelines. If you do not use a body-worn accessory, ensure the antenna and radio product is at least one inch (2.5cm) from your body when transmitting.Data operationWhen using any data feature of the radio product, with or without an accessory cable, position the antenna and radio product at least one inch (2.5 cm) from the body.

Safety and General Information87Approved Accessories• For a list of approved Motorola accessories call 1-800-453-0920, visit our website at www.mot.com/iden, or look in the accessory section of this manual.Electro Magnetic Interference/CompatibilityNOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility.THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOREXPOSURE TO RADIO WAVES.Your wireless phone is a radio transmitter and receiver. It is designed and manufacturednot to exceed the emission limits for exposure to radiofrequency (RF) energy set by theFederal Communications Commission of the U.S. Government. These limits are part ofcomprehensive guidelines and establish permitted levels of RF energy for the generalpopulation. The guidelines are based on standards that were developed by independentscientific organizations through periodic and thorough evaluation of scientific studies.The standards include a substantial safety margin designed to assure the safety of allpersons, regardless of age and health.The exposure standard for wireless mobile phones employs a unit of measurementknown as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.*Tests for SAR are conducted using standard operating positions reviewed by the FCCwith the phone transmitting at its highest certified power level in all tested frequencybands. Although the SAR is determined at the highest certified power level, the actualSAR level of the phone while operating can be well below the maximum value. This isbecause the phone is designed to operate at multiple power levels so as to use only thepower required to reach the network. In general, the closer you are to a wireless basestation antenna, the lower the power output.Before a phone model is available for sale to the public, it must be tested and certified tothe FCC that is does not exceed the limit established by the government-adoptedrequirement for safe exposure. The tests are performed in positions and locations (e.g.,at the ear and worn on the body) as required by the FCC for each model. The highestSAR value for this model phone when tested for use at the ear is 0.81 W/kg and whentested on the body, as described in this user guide, is 0.38 W/kg during voicetransmission using Phone Mode and 0.72 W/kg during packet data transmission. (Body-worn measurements differ among phone models, depending upon available accessoriesand FCC requirements.) While there may be differences between the SAR levels orvarious phones and at various positions, they all meet the government requirement forsafe exposure.The FCC has granted an Equipment Authorization for this model phone with all reportedSAR levels evaluated as in compliance with the FCC RF exposure guidelines. SARinformation on this model phone is on file with the FCC and can be found under theDisplay Grant section of http://www.fcc.gov/oet/fccid after searching on FCC IDAZ489FT5801.Additional information on Specific Absorption Rates (SAR) can be found on the CellularTelecommunications Industry Association (CTIA) web-site at http://www.wow-com.com.______________________________________* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

88www.motorola.comFacilitiesTo avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your radio product when on board an aircraft. Any use of a radio product must be in accordance with applicable regulations per airline crew instructions.Medical DevicesPacemakersThe Health Industry Manufacturers Association recommends that a minimum separation of 6 inches (15 cm) be maintained between a handheld wireless radio product and a pacemaker. These recommendations are consistent with the independent research by, and recommendations of, Wireless Technology Research.Persons with pacemakers should:•ALWAYS keep the radio product more than six inches from their pacemaker when the radio product is turned ON. •Not carry the radio product in a breast pocket. •Use the ear opposite the pacemaker to minimize the potential for interference. •Turn the radio product OFF immediately if you have any reason to suspect that interference is taking place. Hearing AidsSome digital wireless radio products may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.

Safety and General Information89Use While DrivingCheck the laws and regulations on the use of radio products in the area where you drive. Always obey them.When using the radio product while driving, please:•Give full attention to driving and to the road.•Use hands-free operation, if available•Pull off the road and park before making or answering a call if driving conditions so require.

90www.motorola.comOPERATIONALWA R N I N G SFor Vehicles Equipped with an Air BagDo not place a portable radio product in the area over the air bag or in the air bag deployment area. An air bag inflates with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio product may be propelled with great force and cause serious injury to occupants of the vehicle. Potentially Explosive AtmospheresTurn off your radio product, prior to entering any area with a potentially explosive atmosphere, unless it is a radio product type especially qualified for use in such areas (for example, Factory Mutual Approved). Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.NOTE: The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air con-tains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmo-spheres are often but not always posted.Blasting Caps and AreasTo avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.!W A R N I N G!

91Cleaning and Drying ConsiderationsUsing a leather carry case may help protect the surfaces and help prevent liquids (e.g., rain) from entering into the interior of the radio product. This product is not water proof, and exposing the unit to liquids may result in permanent damage to the unit.If you radio product interior gets wet, then do not try to accelerate drying with the use of an oven or a dryer as this will damage the radio product and void the warranty. Instead, do the following:1. Immediately power off the radio product.2. Remove Battery from radio product.3. Shake excess liquid from phone.OPERATIONAL CAUTIONSAntennasDo not use any portable radio product that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result.BatteriesAll batteries can cause property damage and/or bodily injury, such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects.When the battery is detached from the phone, your batteries are packed with a protective battery cover. Please use this cover for storing your batteries when not in use.!C a u t i o n

92www.motorola.com4. Place phone and battery in an area that is at room temperature and has good air flow.5. Let phone and battery dry for 72 hours before reconnecting the battery and/or powering on the phone.If the phone does not work after following the steps listed above, contact your dealer for servicing information.Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners. Also, avoid applying liquids directly on the radio product.

Accessory Safety Information93ACCESSORY SAFETY INFORMATIONIMPORTANT:SAVE THESE ACCESSORY SAFETY INSTRUCTIONS • Before using any battery or battery charger, read all the instructions for and cautionary markings on (1) the battery, (2) the battery charger, which may include a separate wall-mounted power supply or transformer, and (3) the radio product using the battery.• Do not expose any battery charger to water, rain, or snow as they are designed for indoor or in-vehicle use only. • To reduce the risk of damage to the cord or plug, pull by the plug rather than the cord when you disconnect the battery charger from the power source outlet. • Do not operate any battery charger with a damaged cord or plug - replace them immediately.• Battery chargers may become warm during operation, but not hot. If it becomes hot to the touch, unplug it from the power outlet immediately and discontinue its use. • Use of a non-recommended attachment to a battery charger may result in a risk of fire, electric shock, or injury to persons.• Make sure the battery charger power cord is located so that it will not be stepped on, tripped over, or subjected to damage or stress.• An extension cord should not be used with any battery charger unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure that:• The pins on the plug of the extension cord are the same number, size, and shape as those on the plug of the charger.• The extension cord is properly wired and in good electrical condition. • The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet.• Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician.To reduce the risk of injury, charge only the rechargeable batteries listed in the Accessories section of this manual. Other types of batteries may burst, causing personal injury and damage.!W A R N I N G!

94www.motorola.com• Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.• Maximum ambient temperature around the power supply or transformer of any battery charger should not exceed 40°C (104°F).• The output power from the power supply or transformer must not exceed the rating given on the Desktop Dual-Pocket Charger.• The disconnection from the line voltage is made by unplugging the power supply from the AC receptacle.• To reduce risk of electric shock, unplug any battery charger from the outlet before attempting any maintenance or cleaning.• For optimum charging performance, turn off the radio product while charging it in any battery charger.

Limited Warranty Motorola Communication Products (U.s.)95LIMITED WARRANTY MOTOROLA COMMUNICATION PRODUCTS (U.S.)I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:MOTOROLA, INC. (“MOTOROLA”) warrants the MOTOROLA manufactured iDEN Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:Rechargeable Batteries will be replaced during the applicable warranty period if:a. the battery capacity falls below 80% of rated capacity, orb. the battery develops leakage.MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used NOTE: This Warranty applies within the fifty (50) united states and the District of ColumbiaiDEN Subscriber Digital Mobile and Portable UnitsOne (1) YearProduct Accessories One (1) Year

96www.motorola.comin connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty.II. GENERAL PROVISIONS:This warranty sets forth the full extent of MOTOROLA’S responsibilities regarding the Product, Repair, replacement or refund of the purchase price, at MOTOROLA’S options, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.III. STATE LAW RIGHTS:SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY.This warranty gives specific legal rights, and there may be other rights which may vary from state to state.IV. HOW TO GET WARRANTY SERVICE:You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call MOTOROLA at 1-800-453-0920 for warranty service location information.

Limited Warranty Motorola Communication Products (U.s.)97V. WHAT THIS WARRANTY DOES NOT COVER:a. Defects or damage resulting from use of the Product in other than its normal and customary manner.b. Defects or damage from misuse, accident, water, or neglect.c. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.d. Breakage or damage to antennas unless caused directly by defects in material workmanship.e. A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the audition to the Product of non-MOTOROLA supplied equipment) which adversely affect performance of the Product or interfere with MOTOROLA’S normal warranty inspection and testing of the Product to verify any warranty claim.f. Product which has had the serial number removed or made illegible.g. Rechargeable batteries if:1. Any of the seals on the battery enclosure of cells are broken or show evidence of tampering.2. The damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.h. Freight costs to the repair depot.i. A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLA’S published specifications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.j. Scratches or other cosmetic damage to Product surfaces that does not effect the operation of the Product.k. Normal and customary wear and tear.

98www.motorola.comVI. PATENT AND SOFTWARE PROVISIONS:MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:a. That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;b. That MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; andc. Should the Product or parts become, or in MOTOROLA’S opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product or any parts thereof.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.

Limited Warranty Motorola Communication Products (international)99LIMITED WARRANTY MOTOROLA COMMUNICATION PRODUCTS (INTERNATIONAL)I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:MOTOROLA warrants the MOTOROLA manufactured iDEN Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:Rechargeable Batteries will be replaced during the applicable warranty period if:a. the battery capacity falls below 80% of rated capacity, orb. the battery develops leakage.MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.NOTE: This Warranty applies in Singapore and the Philippines.iDEN Subscriber Digital Mobile and Portable UnitsOne (1) YearProduct Accessories (manufactured by or under license from MOTOROLA)One (1) Year

100www.motorola.comMOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty.II. GENERAL PROVISIONS:This warranty sets forth the full extent of MOTOROLA’S responsibilities regarding the Product, Repair, replacement or refund of the purchase price, at MOTOROLA’S options, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.III. HOW TO GET WARRANTY SERVICE:You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service.IV. WHAT THIS WARRANTY DOES NOT COVER:a. Defects or damage resulting from use of the Product in other than its normal and customary manner.b. Defects or damage from misuse, accident, water, or neglect.c. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.

Limited Warranty Motorola Communication Products (international)101d. Breakage or damage to antennas unless caused directly by defects in material workmanship.e. A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the audition to the Product of non-MOTOROLA supplied equipment).f. Product which has had the serial number removed or made illegible.g. Rechargeable batteries if: 1. Any of the seals on the battery enclosure of cells are broken or show evidence of tampering.2. The damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.h. Freight costs to the repair depot.i. A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLA’S published specifications or the local type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.j. Scratches or other cosmetic damage to Product surfaces that does not effect the operation of the Product.k. Normal and customary wear and tear.l. Exclusion for defects or damage arising from use of the products in connection with non-MOTOROLA equipment.V. PATENT AND SOFTWARE PROVISIONS:MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:a. That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;b. That MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise;

102www.motorola.comandc. Should the Product or parts become, or in MOTOROLA’S opinion be likely to become, the subject of a claim of infringement of a patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or sued in connection with the Product or any parts thereof. In no event shall MOTOROLA be liable for any incidental, special or consequential damages arising from any claim of patent infringement or alleged infringement.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.

Owner’s Information103OWNER’S INFORMATIONMobile Equipment Identifier (IMEI)_____________________________Own Phone Number_____________________________Own Private Number_____________________________Date Purchased______________Dealer Telephone Number_______________________Customer Service Number_______________________

104www.motorola.comPrivate Number DirectoryTalkgroup DirectoryPrivate Number Name123456789Talkgroup Number Name123456789

European Union Directives Conformance Statement105EUROPEAN UNION DIRECTIVES CONFORMANCE STATEMENTThis product is in conformance with the requirements of the R&TTE Directive (1999/5/EC).Declarations of Conformance with the requirements are located atMotorolaiDEN Subscriber Division8000 West Sunrise BoulevardPlantation, Florida 33322United States of America (U.S.A.)

106www.motorola.com

Index107IndexAAccessories 75Audio Adapter 80Batteries 75Desktop Dual-Pocket Charger 79Leather Carry Case 75Travel Charger 76Vehicular Battery Charger 77Accessory Connector 15Accessory Safety Information 93Alert Receipt 63Alphanumeric Display 14Alphanumeric Keypad 15Alternate Phone LineReceiving a Call 41Setting the Active Line 41Alternate Phone Line (iDEN Only) 41Antenna 14Area List 68Attaching the Battery 16, 17Audio Adapter 80Removing 80Using 80Audio AdaptorAttaching/Detaching the EarpieceMicrophone 80Auto Answer 66Auto Lock 66Automatic Redial 29BBack Key 14Background noise 30Backlight 26Batteries 75Attaching 17Charging 16, 75Detaching 17Operating Instructions 76Status 17BatteryDesktop Dual-Pocket Charger 79Vehicular Battery Charger 77CCall AlertSending a Call Alert 56Call Alert™ 14, 56Clearing 57Queuing 57Receiving 56Responding to a Queued Call Alert57Sending a Call Alert 56Call Barring 11, 38All Calls 39Changing Passcode 40Incoming Calls 38International Calls 39International Calls except HomeCountry 39Outgoing Calls 39passcode 38Viewing Status 40Call Forwarding 35Conditional 36Unconditional 35Call Hold 37Call Waiting 37Caller ID 30Carrier 11iDEN 18carrierHome 18Changing the Display Language 25ChargingStatus 17Charging the Battery 16DDesktop Dual-Pocket Charger 79Charging a Battery 79Detaching the Battery 17Dialing Methods 27Automatic Redial 29Emergency Dial 29Last Number Redial 28Name Search 28Speed Dial 28Turbo Dial® 28Display Icons 22Display LanguageChanging 25Display Timer 67

108www.motorola.comEEarpiece 14EmergencyCalls 15Dial 29Emergency Calls 22EnglishDisplay Language 25European Union Directives Conform-ance Statement 105FFax and Data Transfer 11Feature Reset 71FrenchDisplay Language 25GGlobal System for Mobile communi-cations, see also GSM 11Group Call 14, 59Adding and Storing a Talkgroup 59Receiving 59Group Call (iden only) 59Group Mode 11, 14, 59GSM 51Network List Program 70Network Name 70Network Search 70See also Global System for MobileCommunications 11Service Area 18HHands-Free Speakerphone 29HomeCarrier 18Home Key 15Ii2000 11, 14, 22, 233-Way Calling 37Accessories 75Alternate Phone Line (iDEN Only)41Call Alert™ 56Call Barring 38Call Forwarding 35Call Hold 37Call Waiting 37Dialing Methods 27Display Icons 22Display Language 25Group Calls (iden only) 59Hands-Free Speakerphone 29In service status 18In use status 18Last 10 Calls Received and SentLists 48Light Sensor 18Mail Services 61Menus 23Message Mail 63Modes 23Networks 53No service status 18Phone Calls 27Phone List Entries 47Phone Number 31Phone Numbers 49Phone Only Mode (iDEN Only) 42Private Calls 55Private ID 58Private ID List Entries 48Private/Group Mode Speaker 56Programming Menus 66Quickstore of Private IDs 57Receiving a Phone Call 30Registering status 18Setting Up 12SIM Card PIN 19Status 18Stored Lists 44Time and Date 24Traveling between Systems 51Turning Off 18Turning On 17VibraCall™ 31iDEN 11carrier 18Service Area 18International Phone Calls 27International Phone Numbers 44KKeypad Lock 33

Index109LLanguageChange 71Last 10 Calls Received and Sent Lists50Last 10 Calls Received list 30Last Call Timer 67Last Number Redial 28Last Ten Received and Sent lists 11Leather Carry Case 75LED (Light Emitting Diode) 14LED indicator 18Flashing Green 18Flashing Red 18Solid Green 18Solid Red 18Light Sensor 18MMail 64Mail Display 66Mail Memory Full 64Mail Services 61Manual Lock 66Master Clear 71Master Reset 72Menus 15, 23menusoptions 23Messaging Services 11Microphone 14Missed-Call Indicator 11Mode Key 14Modes 23Group 23Phone 23Private 23Motorola 11Mute 30NName Search 28Net Mail 61Network 51Network ID 72Networks 53Preferred List 52Next Word Key 15Noise 30Number Not in Service 73OOn/Off Button 14One-Minute Beep 67Option Keys 14Owner’s Information 103PPasscode 69Pausesinserting into phone numbers 27Personal Identification NumberSee also PIN 11Ph # 66Phone Call 303-Way Calling 37Call Barring 38Call Forwarding 35Call Hold 37Call Waiting 37Making 27Missed Call Indicator 30Receiving 30Stored Lists 44Phone List 68Phone Mode 11, 14Phone NumberWhat is my phone number 31Phone numbers 44Phone Only 71Phone Only Mode (iDEN Only) 42Phone Sys 69Phone/Prvt List 67PIN 15, 20Disabling 21Enabling 21Entering 19See also Personal IdentificationNumber 11Unblocking 19Please Try Again 74Please Try Later 73PortugueseDisplay Language 25

110www.motorola.comPre-Pend Feature 44Private Call 55Name Search 55Receiving 55Scroll 55Private ID 44, 57, 66, 68Storing 58Private Mode 11, 14Private/Group Mode Speaker 56Programming Menus 661 Minute BeepOff 67Area List Program 68Auto AnswerOff 66Auto LockOff 66Change Passcode 69Change SIM Card PINs 69Display TimerOff 67Earpiece Volume 69Feature Reset 71GSM Network List Program 70GSM Network Name 70GSM Network Search 70Keypad Volume 69Language 71Last Call Timer 67Mail DisplayOff 66Mail Volume 68Manual LockOff 66Master Clear 71Master Reset 72Network ID 72Own Ph # 66Own Pvt ID 66Phone List Edit 68Phone Only 71Phone Sys 69Phone/Prvt List 67Prvt ID List Edit 68Require SIM Card PIN 69Reset Timer 67Ringer Volume 68Set Ring Style 68Silent Group 69Speaker Volume 69Spkr Vol Set Tone 69Talkgrp List Program 68Time/Date 71Total Timer 67Vibrate AlertOff 67PUK 20Punctuation Key 14Push-To-Talk (PTT) Button 14QQuickstore 57Quickstore of Phone Numbers 49RReceiving a Phone Call 30Reset Timer 67Ring Style 33, 68Setting 33Setting for Alternate Line 34Ringer Volume 33, 68Roaming 38SSafety and General Information 85Safety Information 85Accessories 93Scroll 28Scroll Key 14Selectable Backlight Timer 26Self Check Error 74Self Check Fail 74Send/End Key 15Service AreaiDEN 18Service Conflict 73Service Not Available 73Service Restricted 73Setting the Time and Date 24Silent Group 69SIM 15, 25See also Subscriber Identity Module11SIM Card 15

Index111Inserting 15SIM Card PINChange 69Require 69SpanishDisplay Language 25Speaker Key 15Speakerphone 14Speed Dial 28Status LIght (LED) Indicator 18Status Messages 73Number Not in Service 73Please Try Again 74Please Try Later 73Self Check Error 74Self Check Fail 74Service Conflict 73Service Not Available 73Service Restricted 73System Busy Try Later 73User Busy in Private 73User Not Authorized 73User Not Available 73Stored Lists 44Editing and Erasing Phone List En-tries 47Editing and Erasing Private ID ListEntries 48Last 10 Calls Received and SentLists 48Quickstore of Phone Numbers 49Storing Names and Numbers 46Subscriber Identity ModuleSee also SIM 11System Busy Try Later 73System Name 18TTalkgroups 59Talkgrp List 68Three-Way Calling 37Time and Date 7112- or a 24-hour clock format 24setting 24Total Timer 67Travel Charger 76Operating 77Using 77Traveling Between SystemsLast active 51Traveling between Systems 51GSM only 51GSM preferred 51iDEN only 51iDEN preferred 51Roam all 51Searching for a Network 51Storing New Networks to YourKnown list 53Storing Your Preferred List of Net-works 52Turbo Dial® 11, 28Turning Off Your i2000 18Turning On Your i2000 17UUser Busy in Private 73User Not Authorized 73User Not Available 73VVehicular Battery Charger 77Operating Specifications 79Removing 78Using 78Vehicular battery Charger 78Vibe-All Key 14VibraCallSelecting 32VibraCall™ 31Group/Prvt Vibe 31Phone Vibrate/Ring 31Vibe All 31VibraCall™ Mail Vibe 31Vibrate Alert 67Vibration-Only Key 11Voice Mail 62VolumeEarpiece 69Keypad 69Mail 68Speaker 69Volume Control Buttons 14Volume Level 14

112www.motorola.comWWarranty 99