Motorola Solutions 89FT5841 iDEN i740 with MOTOtalk User Manual i740Mot

Motorola Solutions, Inc. iDEN i740 with MOTOtalk i740Mot

Exhibit 8 Users Manual

MotorolaiDENDigital Multi-service Data-capable Phonei740 Phone User’s GuideFIRST DRAFT@NNTN6014A@TBD
IMPORTANT NOTICE: PLEASE READPRIOR TO USING YOUR PHONEThe SIM card provided in this kit is intended for use withthe phone provided in this package.Loss of certain features will result when using a SIMcard from one of the following models:i30sx,i35s,i50sx,i55sr,i58s,i60c,i80s,i85s,i88s,i90c,i95clseries, and thei2000 series.For more information on SIM card compatibility, go towww.motorola.com/iden/support.Defects or damage to your Motorola phone that resultfrom the use of non-Motorola branded or certifiedAccessories, including but not limited to replacementhousings and or other peripheral accessories, areexcluded from warranty coverage. Please refer to thetext of Motorola's Limited One Year warranty located inthis user’s guide for complete details.
iContentsGetting Started........................................... 1Battery...............................................................3Activating Service..............................................6Powering On and Off.........................................6Enabling Over-the-Air Security..........................6Phone Programming .........................................7Finding Your Phone Number.............................7Phone Basics ....................................................8Locating Your SIM Card..................................11SIM Card Security ...........................................12Antenna ...........................................................15Accessories.....................................................15For More Information.......................................15Making Calls............................................. 16Phone Calls.....................................................16Private Calls ....................................................16Receiving Calls................................................17Ways to Enter Calls.........................................17Missed Phone Calls.........................................20Using Speakerphone.......................................20Using Mute ......................................................21Making Emergency Phone Calls .....................21MOTOtalkTM .......................................................... 22Channels and Codes.......................................23Private MOTOtalk Calls...................................25Emergency Calls Using MOTOtalk .................26Setup Options .................................................26Call Alerts..................................................28Sending Call Alerts..........................................28Receiving Call Alerts .......................................28Using the Call Alert Queue..............................28Recent Calls..............................................30Viewing Recent Calls ......................................30Storing Recent Calls to Contacts ....................30Deleting Recent Calls......................................31Contacts ....................................................32Viewing Contacts ............................................33Creating Entries ..............................................34Storing Numbers From the Idle Screen...........35
iiEditing Entries .................................................36Deleting Entries ...............................................36Checking Capacity ..........................................36Creating Pauses and Waits.............................36International Numbers .....................................37Accessing Contacts with GSM Phones ...........37Call Forwarding........................................ 38Forwarding All Calls ........................................38Turning Off Call Forwarding ............................39Forwarding Missed Calls .................................39Viewing Call Forwarding Settings....................40Advanced Calling Features..................... 41Call Waiting .....................................................41Switching Between Calls .................................41Putting a Call on Hold......................................42Calling 2 People ..............................................42Creating Pauses and Waits While Dialing.......43Making International Calls ...............................43Setting One Touch PTT...................................43Setting Flip Actions..........................................44Call Timers ......................................................45Using Your Phone as a Modem ......................46Making TTY Calls............................................47Group Calls and Selective Dynamic GroupCalls .......................................................49Group Calls .....................................................49Emergency Group Calls ..................................50Selective Dynamic Group (SDG) Calls ...........52Memo .........................................................57Ring Tones................................................58Setting Your Phone to Vibrate.........................58Ring and Vibrate .............................................59Assigning Ring Tones to Contacts ..................59Viewing Ring Tone Assignments ....................59Downloading More Ring Tones .......................59Managing Memory ..........................................60Deleting Custom Ring Tones ..........................60Entering Text ............................................61Using Alpha Mode...........................................61Using Word Mode ...........................................61Special Function Keys.....................................62
iiiUsing Numeric Mode.......................................63Using Symbols Mode ......................................63Messages ................................................. 64Message Notifications .....................................64Message Center ..............................................65Voice Mail Messages ............................... 66Receiving a Message......................................66Accessing Voice Mail fromthe Message Center ...................................66Sending Unanswered Calls to Voice Mail .......66MOSMS Messages ................................... 67Setting Up........................................................67Receiving a Message......................................67Reading from the Message Center .................68Creating and Sending Messages ....................68Sorting Messages............................................71Managing Memory...........................................71Datebook .................................................. 72Viewing Datebook ...........................................72Creating Events...............................................73Editing Events .................................................75Deleting Events ...............................................75Receiving Reminders ......................................76Making Calls From Datebook..........................77Customizing Datebook Setup..........................77Java Applications.....................................79Installing Applications......................................79Running Applications ......................................79Suspending Applications .................................79Resuming Applications....................................80Ending Applications.........................................80Downloading Applications ...............................80Deleting Applications.......................................80Managing Memory ..........................................81Shortcuts on the Main Menu ...........................81Java Applications and GPS Enabled ..............82GPS Enabled.............................................84IMPORTANT: Things to Keep in Mind ............84Making an Emergency Call .............................85Viewing Your Approximate Location ...............86Enhancing GPS Performance .........................87
ivUpdating Satellite Almanac Data.....................89Setting Privacy Options ...................................89Using GPS with Map Software ........................91Voice Records.......................................... 93Creating Voice Records ..................................93Playing Voice Records ....................................93Labeling Voice Records ..................................93Deleting Voice Records...................................94Locking Voice Records....................................94Managing Memory...........................................94Customizing Your Phone ........................ 95Setting the Volume..........................................95Setting Your Phone to Vibrate.........................95Changing the Look of Your Phone ..................95Temporarily Turning Off Calls .........................97Using Settings .................................................97Profiles ................................................... 102Viewing Profiles.............................................102Switching Profiles ..........................................102How Changing Settings Affects Profiles........102Temporary Profiles........................................103Creating Profiles............................................104Editing Profiles ..............................................104Deleting Profiles ............................................104Setting Call Filtering ......................................105Shortcuts.................................................107Creating a Shortcut .......................................107Using a Shortcut............................................107Editing a Shortcut..........................................108Deleting Shortcuts.........................................108Using a Headset .....................................109Attaching a Headset......................................109Using a Remote PTT Button .........................109Understanding Status Messages ..........110Safety and General Information ............113RF Operational Characteristics .....................113Portable Radio Product Operation and EMEExposure...................................................113Electromagnetic Interference/Compatibility...116Medical Devices ............................................116
vOperational Warnings....................................117Operational Cautions.....................................118Accessory Safety Information........................119MOTOROLA LIMITED WARRANTY ...... 121Limited WarrantyMotorola Communication Products(International) ..................................... 125Patent and Trademark Information ...... 129Index ....................................................... 130Driving Safety Tips ................................ 136
viDECLARATION OF CONFORMITYPer FCC CFR 47 Part 2 Section 2.1077(a)Responsible Party Name: Motorola, Inc.Address: 8000 West Sunrise BoulevardPlantation, FL 33322 USAPhone Number: 1 (800) 453-0920Hereby declares that the product:Product Name:i740Model Number: H61XAN6RR4ANConforms to the following regulations:FCC Part 15, subpart B, section 15.107(a),15.107(d) and section 15.109(a)Class B Digital DeviceAs a personal computer peripheral, this devicecomplies with Part 15 of the FCC Rules. Operationis subject to the following two conditions: (1) thisdevice may not cause harmful interference, and (2)this device must accept any interference received,including interference that may cause undesiredoperation.Note: This equipment has been tested andfound to comply with the limits for a ClassB digital device, pursuant to part 15 of theFCC Rules. These limits are designed toprovide reasonable protection againstharmful interference in a residentialinstallation. This equipment generates,uses and can radiate radio frequencyenergy and, if not installed and used inaccordance with the instructions, maycause harmful interference to radiocommunications. However, there is noguarantee that interference will not occurin a particular installation.If this equipment does cause harmfulinterference to radio or television reception,which can be determined by turning theequipment off and on, the user isencouraged to try to correct the interferenceby one or more of the following measures:•Reorient or relocate the receivingantenna.•Increase the separation between theequipment and receiver.•Connect the equipment into an outlet ona circuit different from that to which thereceiver is connected.•Consult the dealer or an experiencedradio/TV technician for help.
vii
1Getting StartedvolumecontrolsPush-To-Talk(PTT) buttonaccessory connectoraudio jackspeaker(in back)retractableantennaEmergency Groupcall buttonmicrophonelight sensorear piece
2Getting StartedTo start using youri740 phone:•Make sure your SIM card is in place.•Charge the battery.•Activate your service.•Enable over-the-air security if you are promptedto.pPower button.Navigation key — press the arrows toscroll through menus and lists.OOK key — selects highlighted item;answers calls.mMenu key — accesses context-sensitivemenus.AOption key — selects the optionappearing above it on the display.sSend key — places phone calls.eEnd key — ends phone calls; returns toidle screen.tActs like swhentheflipisclosed;turnsspeaker on; used with voice names andvoice records..Press and hold for 3 seconds to make anEmergency Group Call.
3BatteryBatteryRemoving the Battery Door1Make sure the phone is powered off. See“Powering On and Off” on page 6.2Slide the release button back until it releases thebattery door.3Allow the battery door to pop up, slide it forward,and remove it from the back of your phone.Inserting the BatteryYour phone comes with a Standard Lithium IonBattery.1With the phone powered off, remove the batterydoor.2Insert the top of the battery into the battery area.Press the bottom of the battery to secure it.speaker
4Getting Started3Replace the battery door and press it gently untilyou hear a click.Charging the BatteryYour phone comes with a rapid travel charger.1Plug the charger into an electrical outlet.2Open the connector cover.3Plug the other end of the charger into theaccessory connector.Charger Attached appears on the full-sizeddisplay.Tip: To remove the charger from the accessoryconnector: Press the buttons on the sidesof the plug. Pull the plug straight out.4If you have purchased optional batteries orchargers, see “Charging Times” on page 5.Note: While the phone is charging, the keypadbacklight will not illuminate.connectorcover
5BatteryCharging TimesCheck your battery and charger type against thegrid below to determine appropriate chargingtimes.For best results, charge the batteries within thetemperature range of 50°F to 104°F (10°C to40°C).Prolonged charging is not recommended.Removing the Battery1With your phone powered off, remove thebattery door.2Remove the battery by pushing the batterytoward the antenna and lifting it out.Battery Use and Maintenance•The Motorola iDEN Approved Lithium Ionchargers provide optimum performance. Otherchargers may not fully charge the iDEN LithiumIon battery or may yield a reduced number oflifetime charge cycles.•Extreme temperatures degrade batteryperformance. Do not store the battery wheretemperatures exceed 140°F (60°C) or fall below4°F (-20°C).•Lithium Ion batteries have a self discharge rateand without use, lose about 1% of their chargeper day.•The battery capacity is degraded if the battery isstored for long periods while fully charged. Iflong term storage is required, store at halfcapacity.Battery ChargerRapid StandardStandardLithium Ion2 hours 3 hoursHighCapacityLithium Ion2 hours 4 hours
6Getting StartedActivating ServiceThe first time you power on your phone, you mustbe in your local calling area. This activates yourservice.Powering On and OffThe first time you power your phone on, a screenmay appear asking you to update your browserinformation. This means you must enable security.To power your phone on:1Open the flip.2Press p.To power your phone off:1Open the flip.2Press and hold p.When You Power On For the FirstTimeIf the Enter SIM PIN Code screen appears, enteryour SIM PIN. See “Entering the PIN” on page 12.Press Aunder Ok.When you receive your phone, the SIM PIN is0000. Change your PIN to prevent fraudulent useof the SIM card (see “Changing the PIN” on page12).As your phone connects to the network, you willsee a welcome message and a connectingmessage. When the idle screen appears, thephone is ready to use.Enabling Over-the-AirSecurityIf you are set up to receive over-the-airprogramming from your service provider, you mustenable security the first time you power on yourphone or within 10 days of first activation of yourphone:1When you power on your phone for the first time,after the idle screen appears, you will beprompted to select Ok to update your browserinformation.
7Phone ProgrammingNote: If you press Aunder Later, you will beprompted to enable security each timeyou power on your phone until you pressAunder Ok.2Press Aunder Ok.3You are prompted to enable security. Press Aunder Yes. A series of screens appears. If yousubscribe to your service provider’s plan, yourhome page appears.4Press eto return to the idle screen.Phone ProgrammingWithin 24 hours of enabling security, you mayreceive an alert notification containing your PrivateID and Talkgroup lists for Private calls.To accept programming:1When you receive an alert notification sayingNew Browser Message - ReceiveProgramming Info,pressOor press AunderGoto.2You are prompted to accept changes to yourlists. Press Oor press Aunder Ok.3If you are prompted again to accept changes toyour lists, press Oor press Aunder Ok.4A confirmation screen displays. Press Oorpress Aunder Ok.5Press eto return to the idle screen.Finding Your Phone NumberMy Info lets you view your phone number, PrivateID, and other phone information:1Press mto access the main menu.2Scroll to My Info.3Press O.4Scroll to see your information:•MyName— Enter your name.•Line1and Line 2 — your phone numbers forphone lines 1 and 2. Each is filled in when youreceive your first call on that line.•Private— Your Private ID is the number thatothers use to contact you using Private calls.ItisfilledinwhenyoureceiveyourfirstPrivatecall.•GroupID— the number of the Talkgroup youhave joined.• Carrier IP — the IP address assigned to yourserviceprovider.Itisfilledinwhenyouregister for packet data services.• IP1 Address and IP2 Address —theIPaddresses you use to access the Internet withyour phone.
8Getting Started• Circuit Data— Your circuit data number is thenumber you use if you want to use your phoneto transfer circuit data. See “Using YourPhone as a Modem” on page 46. You receivethis number from your service provider.Note: The context-sensitive menu under My Infocontains information that may be used byyour service provider if there is a problemwith your phone.Phone BasicsAny time your phone is powered on, the displayprovides you with information and options.The external display shows a shortened version ofthe internal display. To see more information, openthe flip.The screen shown is the idle screen. The text thatappears on your idle screen depends on yourservice provider. The idle screen appears whenyour phone is on, but not engaged in any activity.Text AreaThis area displays menus, messages, names,phone numbers, and other information.Display OptionsTwo display options appear at the bottom of mostscreens. You select a display option by pressingtheoptionkeybelowit.Menus and ListsYour phone’s features are arranged in menus,submenus, and lists.Toaccesstheitemsinamenuorlist,scrollusingthe navigation key at the top of your keypad. Thiskey lets you scroll up, down, left, or right. Holdingdown the appropriate part of the navigation keyspeeds up scrolling.In this guide, this symbol >tells you to select amenu or list item. For example, Settings >Security means:1Scroll to Settings on the main menu.2Press Oto see the Settings screen.status iconstext areamenu icondisplay options
9Phone Basics3Scroll to Security.4Press Oto see the Security screen.Quick Access to Main Menu ItemsEach arrow in the navigation key and Ocan beused to access a main menu item from the idlescreen. Each of these keys is assigned to a mainmenu item when you receive your phone. Toassign different main menu items, see “PersonalizeFeatures” on page 99.OK KeyPressing O:•Selects the highlighted menu item or list item•Sets options•Confirms actions•Places and answer callsMenu KeyMany features provide context-sensitive menusthat let you access related features and actions.This icon Sappears any time a context-sensitivemenu is available. Press mto access the menu.Main MenuAll your phone’s features can be accessed throughthe main menu. You can set the main menu toappear as a list or as large icons.aBrowser Browse the Web.qJava Apps Java applications on yourphone. See page 79.bSettings Customize your phone.Seepage95.mRing Tones Assign ring tones and turnringer off. See page 58.cVoiceRecord Record and play audiomessages. See page 93.jMy Info View personal phoneinformation, includingphone number and PrivateID. See page 7.lGPS Find your approximategeographical location. Seepage 84.dContacts Create, view, store, editContacts and SDG lists.Seepage32.
10Getting StartedStatus IconsStatus icons appear at the top of the display. Someappear at all times. Others appear only when yourphone is engaged in certain activities or when youhave activated certain features.eMessages Access messages. Seepage 53.fCall Forward Set call forwardingoptions. See page 38.oDatebook Schedule appointments.Seepage72.gMemo Store a number to accesslater.Seepage57.hCall Timers Phone usage information.Seepage45.iRecent Calls Lists recent calls. Seepage 30.sShortcuts Create shortcuts toscreens. See page 107.pProfiles Groups of settings youapply together. Seepage 102.kCall Alert Lists call alerts. Seepage 28.mMOTOtalk/MTOptionsLaunch/Exit MOTOtalkAccess MOTOtalk Setupand Help. See page 22.abcdefgdBattery Strength — A fuller batteryindicates a greater charge.opqrsSignal Strength — More bars nexttotheantennaindicateastrongersignal.APhone In Use — Your phone isactive on a phone call.BPrivate In Use — Your phone isactive on a Private call.mMOTOtalk — Your phone is set toMOTOtalk mode.SScan — Your phone is set toreceive Group calls from all theTalkgroups in a Hub.CTalkgroup In Use — Your phone isactive on a group call.SSDG Call In Use— Your phone isactive on a SDG call.
11Locating Your SIM CardLocating Your SIM CardYour SIM (Subscriber Identity Module) card is asmall piece of white plastic located in the SIM cardholder in the back of your phone, underneath thebattery.12 Active Phone Line —1indicatesphone line 1 is ready to make calls;2 indicates phone line 2 is ready tomake calls.eEmergency Group Call —YourphoneisactiveonanEmergencyGroup call.GJHKILCall Forward — Your phone is setto forward calls. See page 38.u M Q Ringer Off — Your phone is set notto ring. See page 58.wxT yzMessages — You have one ormore messages. See page 55.DE Internet — You are ready tobrowse the internet.UAirplane Mode — Your phone isset to airplane mode. See page 97.YZ Packet Data — You are ready totransfer packet data or aretransferring packet data. Seepage 46.N O TTY — You are ready to use yourphonetomakecallsusingateletypewriter device. See page 47.tRoaming — You are using yourphone outside your carrier'snetwork.SIM card
12Getting StartedIf your SIM card is not in the SIM card holder, itmay be in the box your phone came in, attached toa piece of white plastic about the size of a creditcard. If this is the case, carefully detach your SIMcard from the surrounding plastic and insert it asdescribed in “Inserting Your SIM Card” on page 14.If there is no SIM card in your phone or the box,contact your service provider.SIM Card SecurityYour SIM card protects your personal information.The SIM card stores all your Contacts information.Since this information is stored on your SIM card,not in your phone, you can remove the informationby removing your SIM card.Note: Except for making emergency calls, yourphone will not function without the SIMcard.To prevent unauthorized use of your phone, yourSIM card may be protected by a PIN that you entereach time the phone is powered on. You canchange the PIN or turn off the requirement that itbe entered.Entering the PINYou may be required to enter a SIM PIN when youfirst use your phone.When you receive your phone, the SIM PIN is0000. Change your PIN to prevent fraudulent useof the SIM card.Important: If you enter your PIN incorrectly 3 times,your SIM card is blocked. To unblockyour SIM card, you must contact yourservice provider. See “Unblocking thePIN” on page 13.1When the Enter SIM PIN Code screen appears,enter your SIM PIN. An asterisk appears foreach character entered.2Press Aunder Ok.Changing the PIN1From the main menu, select Settings >Security > Change Password > SIM PIN.2At the Enter Old SIM PIN screen, enter thecurrent SIM PIN.3Press Aunder Ok.4At the Enter New SIM PIN screen, enter thenew 4- to 8-digit SIM PIN.5Press Aunder Ok.6At the Re-enter New SIM PIN screen, re-enterthe new SIM PIN to confirm.7Press Aunder Ok.
13SIM Card SecurityTurning the PIN Requirement On andOffWhen the SIM PIN requirement is on, you areprompted to enter your PIN each time you turn onyour phone.Note: If a SIM PIN is required, your phone willnot function until the SIM PIN is entered,except for making emergency calls.When the PIN requirement is off, your phone canbe used without entering a PIN.Important: When the SIM PIN requirement is off,the personal data on your SIM card isnot protected. Anyone can use yourphone and access your personal data.1From the main menu, select Settings >Security > SIM PIN.2Select On or Off.3Enter the current SIM PIN.4Press Aunder Ok.Unblocking the PINIf you enter your PIN incorrectly 3 times, your SIMcard is blocked. To unblock your SIM card, youmust contact your service provider to get a PINUnblock Code (PUK).Important: If you unsuccessfully enter the PUKcode 10 times, your SIM card ispermanently blocked and must bereplaced. If this happens, all data islost. You will get a message to contactyour service provider. Except formaking emergency calls, your phonewill not function with a blocked SIMcard.To unblock the PIN:1Press *#m1.2At your service provider representative’srequest, provide the information needed to giveyouaPUKcode.3Select Unblock PIN.4Enter the PUK code.5Enter a new 4- to 8-digit SIM PIN.6Re-enter your SIM PIN.If you entered the codes properly, SIM Unlockedappears on the display.
14Getting StartedInserting and Removing Your SIMCardImportant: Do not touch the gold-colored areas ofyour SIM card.Switching SIM CardsMoving your SIM card from one phone to anothermoves all your Contacts information, but erasesother information. If you remove your SIM card anduse it with another phone, or use another SIM cardwith your phone, the following information iserased:•The recent calls list•Call forwarding settings•Net alerts•MOSMS drafts, outbox messages, andcustomized quick notes•InformationstoredinMemo•Images in My Pictures•3 most recent GPS Enabled locations•Voice records•Voice names•Datebook events•Options set using the Personalize menuInserting Your SIM Card1With your phone powered off, remove thebattery door and battery.2Hold your SIM card as shown.3Carefully slide your SIM card into your phoneuntil it lines up with the marks above and belowthe SIM card holder.cut cornerSIM cardholder
15AntennaRemoving Your SIM CardImportant: To avoid loss or damage, do not removeyour SIM card from your phone unlessabsolutely necessary.1With your phone powered off, remove thebattery door and battery.2While holding the tab down, slide your SIM cardout of the SIM card holder.Note: Protect your SIM card as you would anydelicate object. Store it carefully.AntennaThe retractable antenna on youri740 phone isdesigned to be extended during calls.To extend the antenna, pull gently on the roundedtip until the antenna is fully extended and clicks intoposition.When finished with a call, retract the antenna bypushing gently on the rounded tip until the antennaclicks into place.To optimize your phone’s performance, extend theantenna when you make or receive a call, andavoid touching the antenna with any body part.Important: Failure to fully extend or retract theantenna until the antenna clicks intoplace causes severely degradedperformance, which may result inmissed calls, dropped calls, or garbledaudio.AccessoriesTo order accessories, log on to our Web site atwww.motorola.com/store/iden or contact yourMotorola Authorized Retailer.For More InformationIf you have questions about youri740 phone,contact your sales representative or your serviceprovider.SIM cardholder
16Making CallsMaking CallsYouri740 phone makes two types of calls: digitalcellular phone calls and Private calls. With Privatecalls, you use your phone as a long-range, digitalwalkie-talkie.Phone CallsWith the Flip Open1Enter the number you want to call.2To place the call:Press s.-or-If you entered the number from the idle screen,press O.3To end the call:Press e.-or-Close the flip.To end a call by closing the flip, you must have theFlip to End feature turned on. See “Setting FlipActions” on page 44.With the Flip Closed1Select the number you want to call from therecent calls list and press t(see “From theRecent Calls List” on page 18). -or-Use a voice name to select the number andplace the call (see “Using a Voice Name” onpage 19).2To end the call, press ..Private Calls1If the flip is open, enter the Private ID you wantto call. -or-Iftheflipisclosed,selectthenumberasyouwould when making a phone call.2Press and hold the PTT button on the side ofyour phone. Begin talking after your phone emitsa chirping sound.3Release the PTT button to listen.Tip: To let someone know you want to talk tohim or her on a Private call, send a callalert. See “Call Alerts” on page 28.
17Receiving CallsReceiving CallsPhone CallsWhen you receive a phone call, your phone rings,vibrates, or lights up its backlight.AnsweringIf the flip is closed, press t.-or-Open the flip. -or-Press s.-or-Press O.-or-Press Aunder Yes.-or-Press any number key.To answer a call by opening the flip, you must havetheFliptoAnsfeatureturnedon(see“SettingFlipActions” on page 44). To answer a call by pressingany number key, you must have the Any Key Ansfeature turned on (see “Phone Calls Features” onpage 98).SendingtoVoiceMailIf the flip is closed, press ..-or-Press e.-or-Press Aunder No.EndingIf the flip is closed, press ..-or-Press e.-or-Close the flip.Private CallsWhen you receive a Private call, your phone emitsa chirping sound or vibrates.1Wait for the caller to finish speaking.2Press and hold the PTT button on the side ofyour phone. Begin talking after your phone emitsa chirping sound.3Release the PTT button to listen.Ways to Enter Calls•Use the numbers on the keypad•Select the number from the recent calls list•Select the number from Contacts•Select a number stored in Datebook•Redial the last phone number called•Sayavoicenameintoyourphone•Use Speed Dial or Turbo Dial®•UseOneTouchPTTtomakeaPrivatecall
18Making Calls•Use a TTY device — see “Making TTY Calls” onpage 47From the KeypadTo enter the number you want to call, press thenumbers on the keypad.Ifyoumakeamistake:•To clear a digit, press Aunder Delete.•To clear all digits, press and hold AunderDelete.•To insert or delete a digit anywhere in the stringof digits you have entered, scroll left or right.•To cancel, press e.From the Recent Calls ListThe recent calls list stores the last 20 calls youmade or received.With the Flip Open1From the main menu, select Recent Calls.2Scroll to the name or number you want to call.With the Flip Closed1Press .to display the most recent call.2To view the rest of the recent calls list, press thevolume controls.You can call the number displayed by pressing ton the top of your phone.From ContactsIf you have numbers stored in Contacts, you canuse these numbers to make calls. For informationon entering numbers into Contacts, see “CreatingEntries” on page 34.1From the main menu, select Contacts.2Scroll to the name or number you want to call.Tip: To find Contacts entries faster, use thekeypad to enter the first letter of the name.3Place the call now. -or-Scroll left or right to display the Contacts type forthe number you want to call.IfyouaremakingaPrivatecall,yourphoneplacesthecalltothePrivateIDstoredintheContactsentry, even if the Private icon is not displayed.Ifyouaremakingaphonecall:•Your phone places the call to the phone numberassigned to the Contacts type displayed.•If the Contacts type displayed is not a phonenumber, your phone places the call to the phonenumber stored in the Contacts entry.
19Ways to Enter Calls•If the Contacts type displayed is not a phonenumber and you have more than one phonenumber stored in the Contacts entry, your phoneprompts you to select the phone number youwant to place the call to.From DatebookIf you have numbers stored as part of events inDatebook, you can use these numbers to makecalls. For information on storing events inDatebook, see “Datebook” on page 72.1From the main menu, select Datebook.2Select the day of the event containing thenumber you want to call.3Highlight or select the event containing thenumber you want to call.For details, see “Making Calls From Datebook” onpage 77.Redialing the Last NumberPress and hold sto place a call to the last phonenumber you called.Using a Voice NameIf you have created a voice name in Contacts forthe number you want to call, say the voice nameinto your phone to enter the number. See page 33for information on voice names.You can use a voice name to enter a number withtheflipopenorclosed.1Press and hold tuntil a prompt appears tellingyoutosaythevoicename.2Speaking into the microphone, say the voicename assigned to the number you want to call.Your phone plays the name back to you.If you are making a phone call, the call is placedautomatically.Tip: To stop a phone call from being completed,press .if the flip is closed or press e.If you are making a Private call, press and hold thePTTbuttontoplacethecall.Using Speed Dial and Turbo Dial®Each phone number stored in Contacts is assigneda Speed Dial number which you can use to call thatnumber.
20Making CallsSpeed Dial1From the idle screen, use the keypad to enterthe Speed Dial number assigned to the phonenumber you want to call.2Press #.3Press s.Turbo DialFrom the idle screen, press and hold the SpeedDial number (1 through 9) assigned to the phonenumber you want to call.Using One Touch PTTOne Touch PTT sets your phone to call the mostrecent Private ID or SDG list on the recent calls list,or a Private ID or SDG list you choose, every timeyou press the PTT button. See “Setting One TouchPTT” on page 43.Missed Phone CallsWhen you miss a call, this icon Vand the numberof phone calls you have missed appear briefly.With the Flip OpenIfyouwanttodismissthemissedcallmessage,press Aunder Back.-or-If you want to view the missed call on the recentcalls list, press Aunder View.With the Flip ClosedIfyouwanttodismissthemissedcallmessage,press ..If you want to view the missed call on the recentcalls list, press .twice.Using SpeakerphoneTurning on speakerphone makes incoming soundcome out of the phone’s speaker instead of theearpiece. Speakerphone is available whenever youareonanactivephonecall.With the Flip OpenTo turn speakerphone on or off:Press Aunder Spkr.-or-Press t.With the Flip ClosedWhen you make a call with the flip closed,speakerphone is always on.Opening the flip turns speakerphone off.
21Using MuteUsing MuteMuting calls lets you listen to incoming soundwithout transmitting sound. Mute is availablewhenever you are on an active call.To turn mute on:Press Aunder Mute.Whilemuteison,Unmute appears as a displayoption.To turn mute off:Press Aunder Unmute.Making Emergency PhoneCallsYour phone supports emergency calling.Emergency phone calls can be made even whenyour SIM card is blocked or not in your phone.Dial 911 to be connected to an emergencyresponse center. If you are on an active call, youmust end it before calling 911.When you make an emergency call, your phone’sGPS Enabled feature can help emergency servicepersonnel find you, if you are in a location whereyour phone's GPS antenna has established a clearview of the open sky and your local emergencyresponse center has the equipment to processlocation information. See “GPS Enabled” on page84, and particularly “IMPORTANT: Things to Keepin Mind” on page 84 and “Making an EmergencyCall” on page 85, for more information on thelimitations of this feature. Because of thelimitations of this feature, always provide your bestknowledge of your location to the emergencyresponse center when you make an emergencycall.Important: Emergency calls cannot be placed whilethe keypad is locked.Important: If you have not registered on thenetwork, emergency calls cannot beplaced while your SIM card is in yourphone.
22MOTOtalkTMMOTOtalkTMMOTOtalk allows direct two-way phone-to-phonecommunications between two or more phonesequipped for MOTOtalk. You can make andreceive MOTOtalk calls even when network serviceis not available. You can talk to anyone on yourcode and channel within your range.Note: Range will vary based on terrain,man-made structures and atmosphericconditions.MOTOtalk allows you to:•Use code or private mode operation•Useupto10channels•Communicate with standalone MOTOtalk radiosNote: MOTOtalk is not compatible with olderFamily Radio Services products.The following features and main menu items willnotbeavailablewhileinMOTOtalk:•On-network phone calls•On-network Private calls•Data transmission•Incoming message notification•Musical ring tones•Call forwarding•Messages•Call Timers•Call alerts•Voice recordsUsing MOTOtalkTo set your phone to MOTOtalk:1From the main menu, scroll to MOTOtalk andpress Aunder Select.2Select Go to MOTOtalk.Switching to MOTOtalk Please Wait displays.After a few seconds, the MOTOtalk idle screenappears. MT Ready appears on the first line of thedisplay. The code you are set to appears on thesecond line of the display. The channel you are setto appears on the third line of the display.Note: When switching from the network toMOTOtalk, the last channel and code thatwere set appear on the MOTOtalk idlescreen.While in MOTOtalk, this icon mappears on thedisplay, indicating that there is no network signaland MOTOtalk is active.
23Channels and CodesExiting MOTOtalkTo set your phone to network mode whenMOTOtalk is active:1From the MOTOtalk idle screen, press m.2Scroll to MT Options and press AunderSelect.3Select Exit MOTOtalk.SwitchingtoNetworkPleaseWaitdisplays. Aftera few seconds, the network idle screen appears.Talk RangePhones used in MOTOtalk mode should be aminimum of 6 feet apart to maximize performanceand improve transmission range.Channels and CodesYour phone has 10 channels and 15 codes.Channels are divided into sets of frequencies thatallow you to make and receive MOTOtalk calls.Other parties may also be talking on the samechannel.Codes help minimize interference from unwantedmessages and other disturbances when you are onthe same channel as others.To have a conversation, all parties must be on thesame channel and code. For private MOTOtalkcalls, the person you are calling must be inMOTOtalk and set to the same channel to receiveyour call.Note: When making a code call, all parties thatare on your code and channel can hearyour conversation.To set a channel:1From the MOTOtalk idle screen, press AunderEdit.2Scroll to Channel.3Press Aunder Edit.4Select a channel.5When you are finished, press Aunder Back toreturn to the MOTOtalk idle screen.To set a code:1From the MOTOtalk idle screen, press AunderEdit.2Scroll to Code.3Press Aunder Edit.4Select a code.5When you are finished, press Aunder Back toreturn to the MOTOtalk idle screen.
24MOTOtalkTMMaking and Receiving Code Calls inMOTOtalkTomakeacodecallinMOTOtalk:1Press and hold the PTT button. MT Transmitappears on the first line of display. Beginspeaking after your phone emits the MOTOtalktone.2Release the PTT button to listen.The tone emitted from your phone when usingMOTOtalk is 4 beeps and sounds different from thestandard tone heard with on-network Private andgroup calls.If you receive an error message:•There may be no parties on your channel orcode.•Youareoutofrange.When you receive a code call using MOTOtalk, MTReceive appears on the first line of the display.Note: An incoming MOTOtalk call can beterminated at any time by pressing e.Receive AllYou can set your phone to receive MOTOtalktransmissions from any phone that is set to thesame channel, regardless of the code (1-15), bysetting the code to Receive All. When you receivetransmissions with the code set to Receive All,thedisplay changes from Receive All to the code onwhich the transmission was received.Tip: Youcanreplytoanincomingcallwithin6seconds after hearing the short endingbeep by pressing the PTT button.Note: You cannot initiate a code call when thecode is set to Receive All. If you pressthe PTT button with the code set toReceive All, you will receive an errormessage.To set the code to Receive All:1From the MOTOtalk idle screen, press AunderEdit.2Scroll to Code.3Press Aunder Edit.4Select Receive All.5When you are finished, press Aunder Back toreturn to the MOTOtalk idle screen.
25Private MOTOtalk CallsPrivate MOTOtalk CallsYou can have a private conversation with anotherperson using MOTOtalk. When on a privateMOTOtalk call, no other parties can hear yourconversation. In order to make a private MOTOtalkCall, you must use the valid 10-digit PersonalTelephone Number (PTN) of the person you arecalling. The person you are calling must be inMOTOtalk and set to the same channel to receiveyour call.If you receive an error message:•YoumaynotbeusingavalidPTN.•The person that you are trying to reach may notbe in MOTOtalk.•Thepersonthatyouaretryingtoreachissettoa different channel or is out of range.Private OnlyTo limit MOTOtalk to private conversation only, setyour code to Private Only. In this mode, code callswill be ignored and only private calls can be madeor received.Note: YouwillberequiredtoenteravalidPTNbefore pressing the PTT button.To set the code to Private Only:1From the MOTOtalk idle screen, press AunderEdit.2Scroll to Code.3Press Aunder Edit.4Select Pvt Only.Making a Private MOTOtalk Call1Enter the 10-digit PTN of the person you want tocall on your channel. -or-ScrolltoanumberornameinContacts.-or-Scroll to a number in the recent calls list.2Press and hold the PTT button. Begin speakingafter your phone emits the MOTOtalk tone.3Release the PTT button to listen.The number or name of the person you are callingwill appear in the first line of the display.Receiving a Private MOTOtalk CallThe number or name of the person who initiatedthe call will appear in the first line of the display.Note: You can reply within 6 seconds simply bypressing the PTT button.
26MOTOtalkTMEnding a Private MOTOtalk CallA private MOTOtalk call will end if there is nocommunication for 6 seconds.Note: A private MOTOtalk call may beinterruptedduringthe6secondidletimeby another code call or private call.The display will return to the MOTOtalk idle screen.Emergency Calls UsingMOTOtalkEmergency phone calls can still be made evenwhen you are not connected to network service.Dial 911 to be connected to an emergencyresponsecenter.IfyouareonanactiveMOTOtalkcall, you must end it before calling 911.Setup OptionsMOTOtalk setup options are available in the MTOptionsscreeninbothnetworkandMOTOtalkmodes.To access Setup Options in network:1From the main menu, select MOTOtalk.2Select Setup.To access Setup Options in MOTOtalk:1From the main menu, select MT Options.2Select Setup.You can set your phone to:•Launch directly into MOTOtalk when you selectMOTOtalk from the main menu.•NotifyyouperiodicallywithatonethatyouareinMOTOtalk.Using Direct LaunchTo set your phone to launch MOTOtalk when youselect MOTOtalk from the main menu:1From the Setup screen, scroll to Direct Launchand press Aunder Change.2Select On.Note: If Direct Launch is set to On,youwillnotsee MT Options when you selectMOTOtalk from the main menu. In orderto have access to your setup options,Direct Launch must be set to Off.Oryoucan access setup options while inMOTOtalk by pressing mand selecting MTOptions.
27Setup OptionsTo turn off Direct Launch:1From the Setup screen, scroll to Direct Launchand press Aunder Change.2Select Off.Your phone now displays MT Options when youselect MOTOtalk from the main menu.Using State ToneTo set your phone to notify you with a tone that youareinMOTOtalk:1From the Setup screen, scroll to State Tone andpress Aunder Change.2Select the time frame during which you want tobe notified that you are in MOTOtalk.For example, if you select 1 hour, you will benotified every hour that you are in MOTOtalk.To turn off State Tone:3From the Setup screen, scroll to State Tone andpress Aunder Change.4Select Off.
28Call AlertsCall AlertsSending a call alert lets the recipient know youwant to talk to him or her on a Private call.When you send a call alert, the recipient’s phoneemits a series of beeps, or vibrates, and displaysyour name or Private ID.The recipient can:•Answer — begin a Private call with the sender•Queue — store the call alert to the call alertqueue, which is a list of call alerts•Clear — dismiss and delete the call alertSending Call Alerts1Enter the Private ID you want to send to, as youwouldwhenmakingaPrivatecall.2Press Aunder Alert.Ready to Alert appearson the display.3Press the PTT button until Alert Successfulappears on the display.Note: If the alert is not successful, this maymeanthepersonyouaretryingtoreachison a call or has the phone turned off.Receiving Call AlertsWhen you receive a call alert, you must answer,queue, or clear it. You cannot receive phone callsor Private calls until you do.To answer a call alert:PressthePTTbuttontomakeaPrivatecalltothe sender.To queue a call alert:Press Aunder Queue.To clear a call alert:Press O.-or-Press Aunder Clear.-or-If the flip is closed, press ..Note: The recent calls list also stores call alertsyou have received. They appear asPrivate calls. Call alerts remain in yourrecent calls list until you delete them oruntil they reach the end of the list.Using the Call Alert QueueWhen you queue a call alert, it remains in the callalert queue until you make a Private call to thesenderordeleteit.
29Using the Call Alert QueueViewing Call Alerts1From the main menu, select Call Alert.2Scroll through the list.Viewing Date and TimeTo view the date and time a call alert was received:1From the main menu, select Call Alert.2Select the call alert you want information on.Responding to Call Alerts in theQueueAfter you queue a call alert, you can respond to itby making a Private call to the sender or sending acall alert to the sender.Making a Private Call to the Sender1From the main menu, select Call Alert.2Scrolltothecallalertyouwanttorespondto.3PressthePTTbuttontobeginthecall.This removes the call alert from the queue.Sending a Call Alert to the Sender1From the main menu, select Call Alert.2Scrolltothecallalertyouwanttorespondto.3Press Aunder Alert.Ready to Alert appearson the display.4Press the PTT button until Alert Successfulappears on the display.Deleting Call AlertsTo delete a call alert from the queue:1From the call alert queue, scroll to the call alertyou want to delete.2Press m.3Select Delete.4Press Oor press Aunder Yes to confirm.To delete all call alerts from the queue:1From the call alert queue, press m.2From the call alert menu, select Delete All.3Press Oor press Aunder Yes to confirm.Sorting Call AlertsTip: Youmusthaveatleastonecallalertinthequeue to access this feature.To sort call alerts by the order they were received:1From the main menu, select Call Alert.2Press m.3Select Sort By.4Select First on Top or Last on Top.
30Recent CallsRecent CallsThe recent calls list stores the numbers of the 20most recent calls you have made and received.If the number of a recent call is stored in Contacts,the name associated with the number appears onthe recent calls list.An icon appears beside the name or numberindicating the Contacts type of the number used inthecall.See“Contacts”onpage32.For phone calls, an icon appears to the left of thename or number giving more information about thecall:Note: The recent calls list also stores call alertsyou have received. They appear asPrivate calls. Call alerts remain in yourrecent calls list until you delete them oruntil they reach the end of the list.Viewing Recent CallsWith the Flip Open1From the main menu, select Recent Calls.2Scroll through the list.To get more information on a recent call:From the recent calls list, select the call youwant information on.This displays information such as the nameassociated with the call, the number, the date,time, and duration of the call.With the Flip Closed1Press .to display the most recent call.2To view the rest the recent call list, press thevolume controls.3Press .to dismiss the recent calls list.Tip: Press tto call the number displayed.Storing Recent Calls toContacts1From the recent calls list, scroll to the numberyou want to store.XA call you made.WA call you received.VA missed call. Missed calls appear on therecent calls list only if you have Caller ID.
31Deleting Recent Calls2Press Aunder Store.-or-If Store is not one of your options: Press m.Select Store.Tip: If Store is not on this menu, the number isalready stored in Contacts.3To store the number as a new entry, select [NewContact].-or-To store the number to an existing entry, selectthe entry.4With the Contacts type field highlighted, scrollleft or right to display the Contacts type you wantto assign the number. For information onContacts types, see page 32.5If you want to add more information to the entry,follow the applicable instructions in “CreatingEntries” on page 34.6Press Aunder Done.Deleting Recent CallsTo delete a call:1From the recent calls list, scroll to the call youwant to delete.2Press Aunder Delete.-or-If Delete is not one of your options: Press m.Select Delete.3Press Oor press Aunder Yes to confirm.To delete all calls:1From the recent calls list, press m.2Select Delete All.3Press Oor press Aunder Yes to confirm.
32ContactsContactsContacts stores up to 600 numbers or addresses.Each Contacts entry can store several numbers oraddresses.InformationstoredinContactsissavedonyourSIM card.A Contacts entry contains:•A name — A name is required if you are storingmore than one number or address to the entry;otherwise, it is optional. Typically, this is thename of the person whose contact information isstored in the entry.•Aringtone—Youcanassignaringtonetoeach entry. This is the sound your phone makeswhen you receive phone calls or call alerts fromany of the numbers stored in the entry.•A Contacts type — Each number or addressstored must be assigned a Contacts type:AMobile phone numberBPrivate Private IDCWork1 phone numberDWork2 phone numberEHome phone numberFEmail email addressGFax phone numberHPager phone numberITalkgroup Talkgroup numberSSDG SDG list numberJIP IP addressKOther phone numberHHub Hub number
33Viewing Contacts•A number or address — Each Contacts entrymust contain a number or address. This may beany type of phone number, Private ID, Talkgroupnumber, SDG list number, email address, or IPaddress.Note: You can store numbers up to 64 digitslong, but every 20 digits must beseparated by a pause or wait. See“Creating Pauses and Waits” on page 36.•A Speed Dial number — When you store aphone number, it is assigned a Speed Dialnumber. You can accept the default Speed Dialnumber or change it.•A voice name — If you create a voice name for anumber, you can then dial that number by sayingthe voice name into your phone. This icon Pappears to the left of the Contacts type icon if avoice name is assigned.Viewing ContactsTo access Contacts:From the main menu, select Contacts.-or-Ifyouareonacall:Pressm.SelectContacts.To view entries:1From the Contacts list, scroll to the entry youwant to view.2If an entry has more than one number oraddress stored, <> surrounds the Contacts typeicon. Scroll left or right to view the icon for eachnumber stored in the entry.3Press Oto view the entry.4Scroll to view the other numbers and addressesstored for the entry.Tip: To view more entries, continue scrolling.Searching for a NameTo search for a name in Contacts:1From the Contacts list, press Aunder Search.-or-If Search is not one of your options: Press m.Select Search.2Enter the name you want to see.3Press O.Your phone finds the name you entered or thenearest match.Showing Only Private IDs,Talkgroups,and SDG ListsTo set Contacts to show only entries that containPrivate IDs, Talkgroups, and SDG lists:1From the Contacts list, press m.
34Contacts2Select Filter.3Set this option to Show Prvt/Grp/Hub.To set Contacts to show all entries:1From the Contacts list, press m.2Select Filter.3Set this option to Show All.Creating EntriesA number or address and a Contacts type arerequired for all Contacts entries. Other informationis optional. You may enter the information in anyorder by scrolling through the entry details.After you have entered the number or address,Contacts type, and any other information you want,you can press Aunder Done to save the entry toContacts.To cancel a Contacts entry at any time press, eto return to the idle screen.To create a Contacts entry:1To access the entry details screen:Select Contacts > [New Contact].-or-From the Contacts list, press m. Select NewContact.2Ifyouwanttoassignanametotheentry:Select Name.Enter the name. When you are finished, pressO.Tip: Press Aunder Browse to select a namealready in Contacts.3Ifyouwanttoassignaringtonetothename:Select Ringer.Selecttheringtoneyouwanttoassign.4ToassignaContactstypetothenumberoraddress being stored:Select the Contacts type field.Select the Contacts type you want to assign.Note: For information about creating SDG lists,see “Creating SDG Lists in Contacts” onpage 52.5To store a number or address:Select the #field (or ID for an email address, orIP for an IP address).Enter the number or address. For phonenumbers, use the 10-digit format. For emailaddresses, see “Entering Text” on page 61.Tip: Press Aunder Browse to select a numberor address from Contacts, the recent callslist, or Memo.
35Storing Numbers From the Idle ScreenWhen you are finished, press O.6Ifyouwanttoassignmoreoptionstothenumber, select [Options]. See “AssigningOptions”.7If you want to add more numbers or addressesto the entry:Scroll past the information you already entered.Enter the additional information for the entryusingstep2throughstep6.Youmustassignaname to the entry, if you have not already.8Press Aunder Done.Assigning Options1Ifyouhavenotalready,select[Options].2The default Speed Dial number assigned to aphone number is displayed in the Speed # field.This is always the next available Speed Diallocation.Ifyouwanttoassignthephonenumbertoadifferent Speed Dial location:With the Speed # field highlighted, press O.Press Aunder Delete to delete the currentSpeed Dial number.Enter the new Speed Dial number using thekeypad.When you are finished, press O.3Ifyouwanttocreateavoicenameforaphonenumber, select Voic e Name.As directed by the screen prompts, say andrepeat the name you want to assign to thenumber. Speak clearly into the microphone.4When you are finished, press Aunder Back.Storing Numbers From theIdle ScreenTo store numbers to Contacts from the idle screen:1Use the keypad to enter the number you want tostore.2Press m.3Select Store Number.4To store the number as a new entry, select [NewContact].-or-To store the number to an existing entry, selectthe entry.5With the Contacts type field highlighted, scrollleft or right to display the Contacts type you wantto assign the number.6Press Aunder Done.
36ContactsEditing Entries1From the Contacts list, scroll to the entry youwant to edit.2Press Aunder Edit.-or-If Edit is not one of your options: Press m.Select Edit.The entry details screen displays.3Follow the applicable instructions in “CreatingEntries” on page 34 to edit the various fields.Deleting EntriesDelete an Entry1From the Contacts list, scroll to the entry youwant to delete.2Press m.3To delete the entire entry, select DeleteContact.4Press Oor press Aunder Yes to confirm.Delete a Number or Address1From the Contacts list, scroll to the entry thatcontains the number or address you want todelete.2Scroll left or right to display the Contacts type forthe number you want to delete.3Press m.4Select Delete Number.5Press Oor press Aunder Yes to confirm.Note: If an entry contains only one number oraddress, deleting the number or addressdeletes the entry.Checking CapacityTo see how many numbers are stored in Contacts:1From the Contacts list, press m.2Select Capacity.Creating Pauses and WaitsWhen storing a number, you can program yourphone to pause or wait between digits whiledialing. A pause makes your phone pause for 3seconds before dialing further. A wait makes yourphone wait for your response before dialing further.This feature is useful when using voice mail orother automated phone systems that require you todial a phone number and then enter an accessnumber.To program a pause:
37International NumbersPress and hold *until the letter P appears.The P represents a 3-second pause.If you store 17035551235P1234, when you selectthis number and make a call, your phone dials thefirst 11 digits, pauses for 3 seconds, then dials thelast 4 digits.If you want a pause longer than 3 seconds, pressand hold *more than once. Each P represents a3-second pause.To program a wait:Press and hold *until the letter W appears.The W means your phone waits before dialingfurther.If you store 17035551235W1234, when you selectthis number and make a call, your phone dials thefirst 11 digits and then waits. A message appearsasking if you want to send the rest of the digits.Press Aunder Yes to dial the last 4 digits.Tip: You can create pauses and waits whiledialing a number from the keypad. See“Creating Pauses and Waits While Dialing”on page 43.International NumbersNote: This feature may not be offered by yourservice provider.When storing a number that you plan to use forinternational calls, use Plus Dialing:1Press and hold 0for two seconds. A “0”appears, then changes to a “+”.Note: The network translates the “+” into theappropriate international access codeneeded to place the call.2Enter the country code, city code or area code,and phone number.For information about making international calls,see “Making International Calls” on page 43.Accessing Contacts with GSMPhonesIfyouplantousetheinformationstoredinContacts with ani2000,i2000plus,oranyotherGSM phone, download iDEN Phonebook Manager.Go to idenphones.motorola.com/iden/support formore information.You can use iDEN Phonebook Manager to makethe Contacts information saved to youri740phone’s SIM card accessible in this type of phone.
38Call ForwardingCall ForwardingCall forwarding sends calls to the phone numbersyou specify. You can forward all calls to onenumber or forward missed calls to differentnumbers depending on the reason you missed thecall.You can forward phone lines 1 and 2independently.Forwarding All CallsWhen you set your phone to forward all calls, anicon appears in the top row of the display:To forward all calls:1From the main menu, select Call Forward >Forward > All Calls.2Select To.If you specified a forwarding number for all callsbefore, this number displays.To forward calls to this number, press AunderBack.To delete this number, press O,thenpressandhold Aunder Delete.3To enter the number you want to forward calls to:Enter the number using your keypad. -or-Press Aunder Search. Select Contacts,Recent Calls,orMemo. Select the number youwant to enter.4Press O.All your calls are now forwarded to the number youspecified.GPhone line 1 is active; calls to phone line 1are being forwarded.IPhone line 1 is active; calls to phone line 2are being forwarded.HPhone line 1 is active; calls to phone lines 1and 2 are being forwarded.JPhone line 2 is active; calls to phone line 1are being forwarded.LPhone line 2 is active; calls to phone line 2are being forwarded.KPhone line 2 is active; calls to phone lines 1and 2 are being forwarded.
39Turning Off Call ForwardingTurning Off Call ForwardingIf you don’t want all your calls forwarded, turn thefeature off:1From the main menu, select Call Forward > To.2Set this option to Off.All your calls are now sent to your phone.Calls you miss are forwarded according to theoptions set for missed calls. By default, missedcalls are forwarded to voice mail.Note: To receive voice mail messages, you mustfirst set up a voice mail account with yourservice provider.Forwarding Missed CallsYou can specify a forwarding number for each typeof missed call:•IfBusy— Your phone is on a call or transferringdata.•IfNoAnswer— You do not answer on the first4rings.• If Unreachable — Your phone is out ofcoverage or powered off.Note: If you want a type of missed call sent tovoicemail,thecallforwardingnumberforthat type of missed call must be yourvoice mail access number.Toforwardmissedcalls:1From the main menu, select Call Forward >Forward > Detailed.2Select If Busy to specify a forwarding numberfor calls received when your phone is busy.3If you specified a forwarding number for this typeof call before, this number displays.To forward calls to this number, press AunderBack andgotostep6.-or-To delete this number, press O,thenpressandhold Aunder Delete.4To enter the number you want to forward thistype of call to:Enter the number using your keypad. -or-Press Aunder Search. Select Contacts,Recent Calls,orMemo. Select the number youwant to enter.5Press O.6Repeat step 2 through step 5 for If No Answerand If Unreachable.7When you are finished, press Aunder Back.
40Call ForwardingViewing Call ForwardingSettings1From the main menu, select Call Forward >Forward > All Calls.2With To highlighted, press Aunder Status.
41Call WaitingAdvanced CallingFeaturesCall WaitingCall Waiting lets you receive a second call while onan active call. Call Waiting is always available,unless you turn it off for a specific call.Ifyouareonacallandreceiveasecondcall,yourphone emits a tone and displays a message sayingyouarereceivingasecondcall.To accept the second call and put the active call onhold:Press Aunder Yes.To accept the second call and end the active call:1Press e.Your phone rings with the second call.2Answer the second call.To decline the second call:Press Aunder No.Ifyousubscribetovoicemail, the call is forwarded to your voice mail box,unless you set Call Forward for If Busy to adifferent number.Turn Off Call WaitingTo turn off Call Waiting during a call:1Press m.2Select In Call Setup > Call Waiting.3Set this option to Off.Tip: To turn Call Waiting back on while still onthe call, set this option to On.To turn off Call Waiting for the next call you makeor receive:1From the main menu, select Settings > PhoneCalls > Call Waiting.2Set this option to Off.Call Waiting is turned back on when you end thecall.Switching Between CallsAny time you have one call active and one call onhold, to make the call on hold active and put theactive call on hold:Press Aunder Switch.-or-If Switch is not one of your options: Press m.Select Switch.
42Advanced Calling FeaturesPutting a Call on Hold1Whileonanactivecall,pressm.2Select Hold.If you want to make the call active again, press Aunder Resume.Calling 2 PeoplePutting a Call on Hold, Making aSecond Call1Place or receive a phone call.2While the call is active, press m.3Select 2nd Call. This puts the call on hold.4Enter the second phone number you want tocall.Tip: For quick ways to enter the number, pressm.5Press sto place the call.To end the second call and make the call on holdactive again:Press e.Tomakethecallonholdactiveandputtheactivecall on hold:Press Aunder Switch.Merging 2 Calls into a 3-Way CallAfter you put a call on hold and place a secondcall, you can combine these calls into a 3-way call:1Press m.2Select Join.All 3 people in the call can speak to and hear eachother.Making a 3-Way Call1Place or receive a phone call.2While the call is active, press m.3Select 3Way. This puts the call on hold.4Enter the second phone number you want tocall.Tip: For quick ways to enter the number, pressm.5Press sto place the call.6Press Aunder Join.All 3 people in the call can speak to and hear eachother.
43Creating Pauses and Waits While DialingCreating Pauses and WaitsWhile DialingYou can enter a pause or wait while dialing anumber. For information on using pauses andwaits, see “Creating Pauses and Waits” on page36.To create a pause while dialing a phone number:1From the keypad, enter the digits you want tooccur before the pause.2Press m.3Select Insert Pause.4Enter the digits you want to occur after thepause.To create a wait while dialing a phone number:1From the keypad, enter the digits you want tooccur before the wait.2Press m.3Select Insert Wait.4Enter the digits you want to occur after the wait.Making International CallsNote: This feature may not be offered by yourservice provider.Plus Dialing lets you place an international call tomost countries without entering the localinternational access code.1Press and hold 0for two seconds. A “0”appears, then changes to a “+”.Note: The network translates the “+” into theappropriate international access codeneeded to place the call.2Enter the country code, city code or area code,and phone number.Setting One Touch PTTOne Touch PTT sets your phone to call the mostrecent Private ID or SDG list on the recent calls list,or a Private ID or SDG list you choose, every timeyou press the PTT button.To set your phone to call the most recent Private IDor SDG list on the recent calls list:1From the main menu, select Settings > 2-WayRadio > One Touch PTT.2Set this option to Last Call.
44Advanced Calling FeaturesTo set your phone to call a Private ID or SDG listyou choose:1From the main menu, select Settings > 2-WayRadio > One Touch PTT > Assigned Number.2To enter the Private ID or SDG list number youwant your phone to call every time you press thePTT button:Enter the number using your keypad. -or-Press Aunder Search. Select Contacts,Recent Calls,orMemo. Select the number youwant to enter.Tip: If you are entering a Talkgroup number,enter # before the number.3Press O.To turn off One Touch PTT:1From the main menu, select Settings > 2-WayRadio > One Touch PTT.2Set this option to Off.Setting Flip ActionsFor Answering CallsTo set your phone to answer calls when you openthe flip:1From the main menu, select Settings > PhoneCalls > Flip Activation > Flip to Ans.2Set this option to On.To set your phone not to answer calls when youopen the flip:Set Flip to Ans to Off in step 2.For Ending CallsTo set your phone to end calls when you close theflip:1From the main menu, select Settings > PhoneCalls > Flip Activation > Flip to End.2Set this option to On.To set your phone not to end calls when you closethe flip:Set Flip to End to Off in step 2.
45Call TimersNote: If you are using your phone with aheadset, and you have the Flip to Endoption set to On, closing your flip sendsincoming sound to the headset and doesnot end the call.Call TimersCall timers measure the duration of your phonecalls, Private or group calls, and circuit data use,as well as the number of Kilobytes sent andreceived by your phone:•LastCall— displays the duration of your mostrecent phone call.• Phone Reset — keeps a running total of yourphone call minutes, until you reset it.• Phone Lifetime — displays the total minutes ofall your phone calls.• Prvt/Grp Reset — keeps a running total of all ofyour Private and group call minutes, until youreset it.• Prvt/Grp Lifetime — displays the total minutesof all your Private and group calls.• Circuit Reset — keeps a running total of all ofyour circuit data use, until you reset it.• Circuit Lifetime — displays the total minutes ofall of your circuit data use.• Kbytes Reset — keeps a running total of thenumber of Kilobytes sent and received by yourphone, until you reset it.To view or reset a timer:1From the main menu, select Call Timers.2Select the feature you want to view or reset.3To view a feature without resetting: Press Owhen you are finished viewing. -or-To reset a feature: Press Aunder Reset.PressOor press Aunder Yes to confirm.Note: The values displayed by Call Timersshould not be used for billing. Call timersare estimates only.
46Advanced Calling FeaturesUsing Your Phone as a ModemNote: This feature may not be offered by yourservice provider.To use your phone as a modem with a laptop,handheld device, or desktop computer:1Open the connector cover.2With the phone’s display facing up, insert a datacable’s connector into the accessory connector,until you hear a click.3InsertthedataplugintotheCOMportoftheother device.When used as a modem, your phone has thesedata transfer modes:•Circuit data — used for sending and receivingfaxes and for transferring large files•Packet data — used for small file transfers suchas emailconnectorcover
47Making TTY CallsTo use these services, you must install the iDENWireless Data Services software (availableseparately). For more information on setting upyour computer and youri740 phone for packet andcircuit data calls, refer to theWireless DataServices User’s Guideor contact your serviceprovider.Making TTY CallsNote: This feature may not be offered by yourservice provider.To use your phone to make phone calls using ateletypewriter (TTY) device:1Connect one end of a 2.5mm cable into theaudio jack on your phone. Connect the otherendofthecabletoyourTTYdevice.2Make sure that your phone’s TTY feature is onand select the TTY mode you want to use.3Use your phone to enter phone numbers andmake calls.When you make a TTY call, these icons appear onthe phone’s display:TTY device features such as Turbo-Code,High-Speed, and Interruption are not supported byyour phone. These features must be turned off ordisabled to use your TTY device with your phone.Turning On the TTY FeatureYour phone’s TTY feature must be on if you wantto make TTY calls, set the TTY mode, or changethe TTY baud rate. To make sure the TTY featureis on:From the main menu, select Settings > PhoneCalls > TTY > Use TTY. This field must say On.Choosing a ModeYour phone supports these TTY modes:•TTY— You type and read text on your TTYdevice.•VCO(Voice-Carry-Over) — You speak into yourphone and read text replies on your TTY device.• HCO (Hearing-Carry-Over) — You type text onyour TTY device and listen to voice replies onyour phone speaker.To change mode while not in a call:1From the main menu, select Settings > PhoneCalls > TTY > Type.2SelecttheTTYmodeyouwant.NPhone call is active.OPhone call is on hold.
48Advanced Calling FeaturesWhen you make a TTY call, the call begins in theTTY mode you last selected.To change mode during a call using your phone:1Press m.2Select In Call Setup > TTY > Type.3Selectthemodeyouwant.To change mode during a call using your TTYdevice, issue one of the following commands:•“VCO please” — to select VCO mode•“HCO please” — to select HCO mode•“HCO off please” — to turn off HCO modeImportant: When you are using HCO, the soundcoming from your phone speaker maybe uncomfortably loud. Use cautionwhen putting the phone to your ear.(For information on setting the volumeof your phone speaker, see “Setting theVolume” on page 95.)Changing the TTY Baud RateBy default, your phone’s TTY baud rate is set to45.45, the baud rate required for TTY calls withinthe U.S. To make calls outside the U.S., set yourTTY baud rate to 50.0.To change the TTY baud rate:1From the main menu, select Settings > PhoneCalls > TTY > Baud.2Selectthebaudrateforyourlocation.
49Group CallsGroup Calls andSelective DynamicGroup CallsYour phone gives you 2 ways to call more than onePrivate ID at once:•Group calls — calls to a Talkgroup•Selective Dynamic Group calls — calls to a SDGlistNote: In order to store SDG lists to youri740,you must use a Group ConnectPlus-capable SIM card. For moreinformation about Group ConnectPlus-capable SIM cards, contact yourservice provider. SDG lists created withyouri740 phone are not readable by anolder iDEN SIM- based phone.Group CallsA group call is similar to a Private call, but is madeto all members of a Talkgroup at once. A Talkgroupis a predetermined group of your service provider’scustomers.Before you can make or receive group calls, aTalkgroup must be established. After the Talkgroupis established, you must join the Talkgroup.Group Calls SDG CallsSet-up Predefined, viayour serviceprovideradministratorusing GroupManagementDynamically,via your phoneGroup Names Talkgroups ISDG lists SVoiceActivatedDialingNo Yes
50Group Calls and Selective Dynamic Group CallsJoining a TalkgroupYour sales representative or your service providerestablishes Talkgroups for you and assigns eachTalkgroup a Talkgroup number. You can choose aname for each of your Talkgroups when you createentries for them in Contacts.To receive group calls made to any of theseTalkgroups, you must join the Talkgroup.1Press Aunder Contcs.-or-From the main menu, scroll to Contacts andpress O.2Scroll to the Talkgroup you want to join.3Press Aunder Join.Note: You can only monitor one Talkgroup at atime.Making Group Calls1Press #. Then enter the Talkgroup numberusing the keypad. -or-Choose the Talkgroup name from Contacts orrecent calls list.2Proceed as if making a Private call.Receiving Group CallsTo answer a group call:Proceed as if answering a Private call. Only onepersonatatimemayspeakonagroupcall.The Private ID or name of the person who isspeaking will appear on the display below theTalkgroup number.TurningoffGroupCallsTo set your phone to prevent you from hearinggroup calls to your Talkgroup:1From the main menu, select Settings > 2-WayRadio > Tkgrp Silent.2Set this option On.To set your phone to let you hear group calls toyour Talkgroup:Set Tkgrp Silent to Off in step 2.Emergency Group CallsAn Emergency Group call is a Hub call that takespriority over all other phone activities in the phonemaking the call and sounds a special emergencytone in the phones receiving the call.
51Emergency Group CallsWhenyoumakeanEmergencyGroupcall,agroupcall is made using a designated emergency Hub orthe Hub you currently belong to.A designated emergency Hub must be created foryou by your service provider and is stored on yourSIM card.If no designated emergency Hub has been createdfor you, Emergency Group calls you make aremade using the Hub you currently belong to. If nodesignated emergency Hub has been created foryouandyouhavenotjoinedaHub,youcannotmake Emergency Group calls.Making an Emergency Group CallImportant: Making an Emergency Group call endsall other activity on your phone,including 911 emergency calls.Unlike other group calls, pressing the PTT buttondoes not start an Emergency Group call. PressingTstarts the call. Pressing the PTT button lets youbegin talking.To make an Emergency Group call:1Press and hold .for 3 seconds to start theEmergency Group call.2Press and hold the PTT button on the side ofyour phone to talk. Begin talking after yourphoneemitsachirpingsound.3Release the PTT button to listen.ToendanEmergencyGroupcall:Press and hold .for 3 seconds.An Emergency Group call automatically ends ifthere is no activity for 30 seconds.Emergency Group calls you make do not appear inthe recent calls list.Receiving an Emergency Group CallWhenreceiveanEmergencyGroupcall,yourphone sounds a special emergency tone, unlessyour phone is set to make no sounds.To answer an Emergency Group call:Proceed as if answering a Private call.Emergency Group calls you receive do not appearin the recent calls list.
52Group Calls and Selective Dynamic Group CallsSelective Dynamic Group(SDG) CallsA SDG call is similar to a Private call, but is madeto all members of a SDG list at once. A SDG list isa group of Private IDs that you create using yourphone. A SDG list must contain at least 2 membersand can contain up to 20 members.You can create a SDG list for one call only or storeit to Contacts so you can call it any time.YoucanuseDirectSendtosendSDGliststootherphones that have this capability.Creating SDG Lists in Contacts1From the main menu, select Contacts.2Select [New SDG List].Note: You can also create a SDG list byselecting [New Contact] and assigningthe SDG contact type.3IfyouwanttoassignanametotheSDGlist,enter the name.Note: Ifyoudonotassignaname,theSDGlistis named “SDG” followed by the numberof members in the SDG list. For example,“SDG (8)” for a SDG list with 8 members.4AddPrivateIDs.See“AddingPrivateNumbers”.5If you want to create a voice name for the SDGlist, select [Options] > Voice Name.Asdirectedby the screen prompts, say and repeat the voicenameyouwanttoassigntotheSDGlist.Speakclearly into the microphone.6Press Aunder Save.Adding Private NumbersYoucanaddPrivateIDstoaSDGlistbyselectingthem from Contacts, the recent calls list, or memo.YoucanaddallmembersinanexistingSDGlistbyselecting the list.You can select more than one member fromContacts and the recent calls list. A check markappears next to each selected item.Tip: To deselect an item: Scroll to a selecteditem and press O.You can also enter Private IDs from the keypad.From Contacts1While creating a SDG list, select [Add Member].-or-Select [Add Number] and press AunderBrowse.AlistofthePrivateIDsandSDGlistsstoredinContacts appears.
53Selective Dynamic Group (SDG) Calls2Select the members you want from the list.3Press Aunder Done.From Recent Calls1While creating a SDG list, select [Add Member].-or-Select [Add Number] and press AunderBrowse.2To view the recent calls list, scroll left or right.-or-Press mand select Recent Calls.3Select the members you want from the list.4Press Aunder Done.From Memo1While creating a SDG list, select [Add Member].-or-Select [Add Number] and press AunderBrowse.2To view memo, scroll left or right. -or-Press mand select Memo.3Press O.From the Keypad1While creating a SDG list, select [Add Number].2Enter the number using the keypad.3Press O.Moving Between Contacts, Recent Calls, andMemoWhile adding members or numbers to a SDG list,you can press mto access Contacts, Recent Calls,or Memo.To move between Contacts, Recent Calls, andMemo, select mand then the option you want.Removing Members or SDG ListsTo remove a member from the SDG list:1Scroll to the member you want to remove.2Press m.3Select Remove Member.To remove all members from the SDG list:1From the SDG list screen, press m.2Select Remove All Members.To delete a SDG list from Contacts:1Scroll to the SDG list you want to delete.2Press m.3Select Delete Contact.
54Group Calls and Selective Dynamic Group CallsStoring SDG Lists FasterFrom Recent Calls1From the recent calls list, select the SDG list youwant.2Press Aunder Store.3If you want, add more information to the entry.4Press Aunder Save.From an Active SDG Call1During an active SDG call, press m.2Select Store SDG.3If you want, add more information to the entry.Note: You can not record a voice name duringan active call.4Press Aunder Save.Making SDG CallsWith the Flip Open1From Contacts, scroll to or select the SDG listyou want. -or-From the recent calls list, scroll to or select theSDG list you want. -or-Press and hold tuntil a prompt appears tellingyou to say the voice name. Say the voice nameassigned to the SDG list you want.-or-Enter or select a Private ID and add morePrivate IDs. See “Starting a SDG Call with aPrivate ID” on page 54.2Press the PTT button.With the Flip ClosedTo make a SDG call from the recent calls list withtheflipclosed:1Press ..Pressthevolumecontrolstoscrolltothe SDG list you want. -or-Press and hold tuntil a prompt appears tellingyoutosaythevoicename.Saythevoicenameassigned to the SDG list you want.2Press the PTT button.Starting a SDG Call with a Private IDYou can start a SDG call with any Private ID youwant to call.1Choose the first Private ID that you want in theSDG call:From the idle screen, enter the Private ID. -or-From the Contacts list, scroll to an entrycontaining the Private ID. -or-From recent calls list, scroll to an entrycontaining the Private ID.
55Selective Dynamic Group (SDG) Calls2Press m.3Select Call SDG.4AddmorePrivateIDs.See“AddingPrivateNumbers” on page 52.5IfyouwanttosavetheSDGlistyouhavecreated: Press m. Select Save SDG.6To make the call, press the PTT button. -or-Press Aunder Done.7Press the PTT button.Receiving SDG CallsTo answer a SDG call:Proceed as if answering a Private call. Only oneperson at a time may speak on a SDG call.SDG Call InformationWhile you are in a SDG call, the following appearson the screen:•The name of the SDG list•The name or the Private ID of the personspeaking•The number of participants in the SDG callSDG Call DetailsDuring a SDG call, you can view details about theother SDG list members, such as their name orPrivate ID, and their status on the call.To view SDG call details, press Aunder Details.In the SDG Call Details view, these icons appearnext to member names or Private IDs:Sending SDG Lists Using Direct SendYou can send a SDG list using Direct Send so thatthe person who receives the SDG list can use thelist.1From Contacts, scroll to or select the SDG listyou want. -or-TThe member of the SDG list who is speaking.AA member of the SDG list who is active on theSDG call, but not speaking.OA member of the SDG list who has exited thecall.UA member of the SDG list who could not bereached on the SDG call.uA member of the SDG list whose status isunknown.
56Group Calls and Selective Dynamic Group CallsFrom the recent calls list, scroll to or select theSDG list you want.2Press m.3Select Send Group Connect Plus via PTT.4To include yourself in the list, press AunderYes.-or-To exclude yourself from the list, press AunderNo.Note: Ifyouchoosetoincludeyourselfandthelist already contains 20 members, you willbe prompted that list is full. You will beexcluded from the list.5Enter the Private ID of the person you want tosend the SDG list to. -or-Select Browse to select a contact from RecentCalls, Contacts, or Memo.6Press O.7To send the SDG list, push the PTT button.The SDG list will display in the recent calls liston the phone that you send the SDG list to.
57MemoMemoletsyoustoreanumber,makeacalltothatnumber, and save it to Contacts.To create a memo:1From the main menu, select Memo.2Enter the number using your keypad.3Press O.Toviewthememolater:1From the main menu, select Memo.To delete the memo:1From the main menu, select Memo.2Press and hold Aunder Delete.3Press O.To edit the memo:1From the main menu, select Memo.2Enter the new number.3Press O.To make a call to the memo number:1From the main menu, select Memo.2To make a phone call, press s.-or-To make a Private call, press the PTT button.To store the memo number to Contacts:1From the main menu, select Memo.2Press m.3Select Store to Cntcs.4To store the number as a new entry, select [NewContact].-or-To store the number to an existing entry, selectthe entry.5With the Contacts type field highlighted, scrollleft or right to display the Contacts type you wantto assign the number.6Press Aunder Done.
58Ring TonesRing TonesTo set the ring tone your phone makes when youreceive phone calls, message notifications, or callalerts:1From the main menu, select Ring Tones.2Make sure VibeAll is set to Off.3Scroll through the list of ring tones and select theone you want to assign. Vibrate sets your phoneto vibrate instead of making a sound; Silent setsyour phone to neither vibrate nor make a sound.Tip: Highlighting a ring tone lets you hear it.4Select the features you want to assign the ringtone to.5When you are finished, press Aunder Done.Note: This icon Mappears on the display if youset your phone to neither vibrate nor makea sound for phone calls.Setting Your Phone to VibrateYou can set your phone to vibrate instead ofmaking a sound when you receive all phone calls,Private calls, group calls, SDG calls, messagesnotifications, and call alerts.1From the main menu, select Ring Tones >VibeAll.2Set this option to On.Tip: Pressing the volume controls to turn downthe volume as far as possible sets VibeAllto On.To set your phone to vibrate instead of making asound for some features but not others:1From the main menu, select Ring Tones.2Make sure VibeAll is set to Off.3Select Vibrate from the list of ring tones.4Select the features you want to set to make nosound.5When you are finished, press Aunder Done.Note: To set ring options for Private calls andgroup calls, see “Setting Your Phone toVibrate” on page 95.These icons indicate how the ringer is set.These icons may appear at the same time.QThe phone always vibrates instead of makinga sound.RThe phone vibrates instead of making asound for phone calls.uPrivate calls, group calls, and SDG calls areheard through the earpiece, not the speaker.
59Ring and VibrateRing and VibrateTo set your phone to ring and vibrate when youreceive phone calls or call alerts:1From the main menu, select Ring Tones.2Make sure VibeAll is set to Off.3Scroll through the list of ring tones and highlightthe one you want to assign.4Press m.5Select Assign w/Vibe.6Select the features you want to set to ring andvibrate.7When you are finished, press Aunder Done.This icon Sappears on the display.Assigning Ring Tones toContactsYou can set the ring tone your phone makes whenyou receive phone calls or call alerts fromsomeone you have stored in Contacts.1From the main menu, select Ring Tones.2Make sure VibeAll is set to Off.3Scroll through the list of ring tones and select theone you want to assign.4Select AContact.5Select the Contacts entry you want to assign thering tone to.Viewing Ring ToneAssignments1From the main menu, select Ring Tones.2Make sure VibeAll is set to Off.3Highlight any ring tone.4Press m.5Select Overview.6Scroll to view ring tones assigned to featuresand Contact entries.Downloading More RingTonesIf you want to use other ring tones, you candownload them into your phone for a fee. Go towww.motorola.com/idenupdate for a selection ofcustom ring tones and downloading instructions.Note: Ring tones purchased from this web sitemay be downloaded only once. If youdelete a ring tone from your phone, youmust purchase it again to download itagain.
60Ring TonesManaging MemoryTo view the amount of memory available forcustom ring tones:1From the main menu, select Ring Tones.2Make sure VibeAll is set to Off.3Highlight any ring tone.4Press m.5Select Memory Usage.Deleting custom ring tones frees memory.Note: Ring tones are stored in your phone usingthe same memory space used to storemessages, voice records, Javaapplications, pictures, and wallpaperimages. Deleting some of these otheritems frees memory for ring tones.Deleting Custom Ring TonesTo delete a custom ring tone:1From the main menu, select Ring Tones.2Make sure VibeAll is set to Off.3Scroll to the ring tone you want to delete.4Press m.5Select Delete.6Press Aunder Yes to confirm.
61Using Alpha ModeEntering TextYou can enter text into your phone using thetraditional method of pressing a key several timesfor each character, or by pressing a key once foreach letter while words likely to be the one youwant are chosen from a database. You can alsoenter symbols and numbers into a text field.In screens that require you to enter text, you seethe following icons. These icons tell you which textinput mode you are using:When you access a screen that requires you toenter text, you start in the mode last used.To choose a text input mode:1At a screen that requires you to enter text, pressm.2Select the text input mode you want to use. Acheckmark appears next to the current mode.Using Alpha Mode•Press any key on the keypad to enter the letters,numbers, and symbols on that key. For example,to enter the letter Y, press 9three times.•Type a letter then scroll up to make that letteruppercase, or type a letter then scroll down tomake that letter lowercase.•See “Special Function Keys” on page 62 formore information on adding spaces,capitalization, and punctuation.Using Word ModeIn Word mode, T9 Text Input analyzes the letterson the keypad button you press and arranges themto create words. As you type, T9 Text Inputmatches your keystrokes to words in its databaseand displays the most commonly used matchingword. You can add you own words to thisdatabase.Entering a Word1Select Word as your text input mode.lAlpha — Press a key several times for eachcharacter.jWord — Press a key once for each letterwhile words likely to be the one you want arechosen from a database.iSymbols — Enter punctuation and othersymbols.kNumeric — Enter numbers.
62Entering Text2Type a word by pressing one key for each letter.For example, to type “test” press 8378.The displayed word may change as you type it.Do not try to correct the word as you go. Type tothe end of the word before editing.3If the word that appears is not the desired word,press 0to change the word on the display tothe next most likely word in the database.Repeat until the desired word appears.If the desired word does not appear, you can add itto the database.Adding Words to the Database1Select Alpha as your text input mode.2Type the word using Alpha mode.3Select Word as your text input mode.4Press #.ThewordyoutypedinAlphatextentrymodeisnow in the database.Note: You cannot store alphanumericcombinations, such as Y2K.Choosing a LanguageTo change the language of the database:1At a screen that requires you to enter text, pressm.2Select Languages.3Select the language you want for your database.Special Function KeysSome of the phone’s keys assume differentfunctions while in Alpha or Word mode.SpacesPress #for a space.CapitalizationWhen you press and hold the #key, it acts as a3-way toggle. Press and hold #to make the nextletter typed uppercase (shift), to make allsubsequent letters typed uppercase (caps lock), orto go back to lowercase letters.These icons appear in the top row of your display:mor XShift is on.nor WCaps lock is on.
63Using Numeric ModeWhen neither of these icons appear, letters typedare lowercase. Scrolling up after typing a lettermakes that letter uppercase.Note: Your phone automatically makes the firstletter of a sentence uppercase.PunctuationPress 1or 0to insert punctuation. Continue topress the key to view the list of symbols availablethrough that key. Pause to select the symbol youwant.Note: Additional punctuation symbols areavailable in Symbols mode.Using Numeric Mode1Select Numeric as your text input mode.2Press the number buttons on your keypad toenter numbers.Using Symbols Mode1Select Symbols as your text input mode.A row of symbols appears along the bottom ofthe phone’s display. Scroll right to view thecomplete row.2Press Oto select the highlighted symbol.
64MessagesMessagesYou can receive the following types of messageson your phone:•Voice mail messages•Short Message Service (SMS) text messages•Depending on your service provider, you mayhave the option to receive fax mail and Netalerts.You have 2 ways to access the messages youreceive:•Respond to the message notification thatappears when the message is received.•Dismiss the message notification and accessthe message later through the message center.You can listen to or view these messages, deletethem, or continue to store them in the messagecenter.Message NotificationsWhen you receive a message, your phone notifiesyouwithtextonthedisplayandanotificationtoneor vibration. You can access the message ordismiss the notification.If you dismiss the notification, the message is notdeleted. It can be accessed through the messagecenter.If you are not on a phone call when you receive amessage, your phone sounds a notification toneevery 30 seconds until you access the message,you dismiss the notification, or the alert time-outexpires.Setting Notification OptionsTo control whether your phone sounds messagenotification tones while you are on phone calls:1From the main menu, select Settings > PhoneCalls > Notifications.2Select the option you want:• Receive All — Tones sound during calls forall types of messages.•MsgMailOnly— Tones sound during callsfor SMS messages; tones for all other typesof messages are held until you end calls.• Delay All — Tones for all types of messagesare held until you end calls.Tip: To set notification options during a call:Press m. Select In Call Setup >Notifications.
65Message CenterMessage CenterThe message center manages your messages.All your messages are stored in the messagecenter. The message center shows how manymessages you have of each type.To access your messages through the messagecenter:1From the main menu, select Messages.2Scrolltothetypeofmessageyouwanttoaccess.3Press Oor press Aunder the display option onthe left.
66Voice Mail MessagesVoice Mail MessagesNote: To receive voice mail messages, you mustfirst set up a voice mail account with yourservice provider.Receiving a MessageWhen you receive a voice mail message, NewVoice Mail Message appears on the display.To call your service provider’s voice mail systemand listen to the message:Press Aunder Call.To dismiss the message notification:If the flip is closed, press ..-or-If the flip is open, press Oor press AunderBack, or close the flip.If the caller leaves a message, this icon yappears on the display, reminding you that youhave a new message.Accessing Voice Mail fromthe Message CenterFromthemainmenu,selectMessages > VoiceMail.Sending Unanswered Calls toVoice MailTosendaphonecalltovoicemailinsteadofanswering it:If the flip is closed, press ..-or-Press e.-or-Press Aunder No.
67Setting UpMOSMS MessagesMobile originated text messages (MOSMS) letsyou send and receive SMS messages to and fromother phones that are using MOSMS.Setting UpBefore you begin using MOSMS, you may need toset up your signature, service center number, andexpiration information:1From the main menu, select Messages.2Scroll to Text Inbox.3Press m.4Select Text Msg Setup.5Select Signature.Enter your signature. It may be up to 11characters long. When you are finished, pressO.6Select Srvc Cntr No.Enter the phone number of your service center.If you do not know this number, contact yourservice provider.When you are finished, press O.7Select Expire After.This is the amount of time messages you sendare saved at the service center if they cannot bedelivered. After this period, they are discarded.Scroll to select the number of days you wantyour messages to be saved.When you are finished, press O.8Select Auto Clean Up. Set this option to On ifyou want your phone to delete sent messages.If you set Auto Clean Up to On,selectCleanUp After to set the number of days after whichsent messages are deleted or the number ofmessages to be kept.9Press Aunder Done to save the informationyou entered.Receiving a MessageTo view the message:Press Aunder Read.To dismiss the message notification:If the flip is closed, press ..-or-If the flip is open, press Aunder Exit or closethe flip.
68MOSMS MessagesIf your phone is powered off when you receive atext message, your phone notifies you the nexttime you power it on. If you are out of yourcoverage area, your phone alerts you when youreturn to your coverage area.Tip: While reading a text and numeric messagethat contains a phone number, you canpress sto call that number.Reading from the MessageCenter1From the main menu, select Messages > TextInbox.2Selectthemessageyouwanttoread.-or-Press the number of the message you want toread.3If the message fills more than one screen, scrollto read it.Tip: Scrolling through one message lets youview the next message.4To save the message, press Aunder Ok.-or-To reply to the message, press Aunder Reply.-or-To see all other choices, including forwardingand deleting the message, calling the sender, orstoring the sender’s number in Contacts, pressm.Creating and SendingMessages1From the main menu, select Messages >[Create Message].-or-Select [Create Message] from Text Inbox, TextOutbox, or Drafts. -or-Highlight Quick Notes and press AunderCompose.Tip: This option is available from manycontext-sensitive menus in the messagecenter.2To address the message:Use the keypad to enter the phone number ofthe person you want to send the message to.-or-Press Aunder Browse. Select Contacts,Recent Calls,orMemo. Select the number youwant to enter.When you are finished, press O.3Enter the text of the message. -or-
69Creating and Sending MessagesTo use a quick note: Press Aunder Browse.Scroll to the quick note you want. For moreinformationonquicknotes,see“UsingQuickNotes”.When you are finished, press O.4If you want to send the message, press Oorpress Aunder Send.-or-To delete the message without sending it, pressAunder Cancel.-or-If you want to request confirmation of delivery,save the message as a draft, or set the sendingmethod, press m. Select the option you want.Beginning Messages From the RecentCalls List1From the recent calls list, scroll to the name youwant to send a message to.2If the entry has more than one phone numberstored, view the phone number you want to sendthe message to.3Press m.4Select Compose SMS. The message isautomatically addressed to the phone numberyou chose.5Follow step 3 through step 4 of “Creating andSending Messages” on page 68.Beginning Messages From the IdleScreen1Using the keypad, enter the number you want tosendamessageto.2Press m.3Select Compose SMS.Themessageisautomatically addressed to the phone numberyou chose.4Follow step 3 through step 4 of “Creating andSending Messages” on page 68.Using Quick NotesQuick notes are short, pre-written text messagesthat you can create, edit, and send. You can storeup to 20 quick notes. A quick note may be up to 30characters long.To create a quick note:1From the main menu, select Messages > QuickNotes > [New Note].2Press Oor press Aunder Create. Enter text.-or-To choose from pre-installed notes, select thenote you want.Tip: For more options, including sending thequick note, press m.
70MOSMS MessagesUsing DraftsWhen you save a message as a draft, it is saved inthe drafts folder.To edit a draft:1From the main menu, select Messages >Drafts.2Selectthedraftyouwanttoedit.3To edit the fields you want to change, followstep 2 through step 4 in “Creating and SendingMessages” on page 68.Resending MessagesTo resend a message:1From the main menu, select Messages > TextOutbox.2Scroll to the message you want to resend. -or-Press the number of the message you want toresend.3Press s.-or-Press m. Select Resend.Deleting Sent MessagesTo delete a sent message:1From the main menu, select Messages > TextOutbox.2Scroll to the message you want to delete.3Press Aunder Delete.4Press Aunder Yes to confirm.To delete all unlocked sent messages:1From the main menu, select Messages > TextOutbox.2Press m.3Select Delete All.4Press Aunder Yes to confirm.Locking and Unlocking SentMessagesWhen you lock a message, it cannot be deleteduntil you unlock it.Locking a Message1From the main menu, select Messages > TextOutbox.2Scroll to the message you want to lock orunlock.3Press m.
71Sorting Messages4Select Lock.Unlocking a Message1From the main menu, select Messages > TextOutbox.2Scroll to the message you want to lock orunlock.3Press Aunder Unlock.Sorting MessagesYou can sort messages in your inbox by sender,time and date, and status. You can sort messagesin your outbox by recipient, time and date, andstatus.1From the main menu, select Messages > TextInbox or Messages > Text Outbox.2Highlight any messages.3Press m.4Select Sort and Order.5Select Sort By to specify the sorting method.6Select Order By to specify the sorting order.Managing MemoryYour text inbox, outbox, and drafts folder have aset amount of memory available for storingmessages.The text inbox holds 20 messages. If the text inboxis full, you cannot receive messages until youdelete some.The outbox and drafts folder share memory space.Together they can hold 30 messages. If the outboxand drafts folder memory is full, you cannot sendmessages or save drafts until you delete some.To view the amount of memory available in yourtext inbox:1From the main menu, select Messages > TextInbox.2Press Aunder Memory.To view the amount of memory available in youroutbox and drafts folder:1From the main menu, select Messages > TextOutbox or Messages > Drafts.2Press Aunder Memory.
72DatebookDatebookDatebook stores up to 250 events. You can storeevents over a 13 month period — 12 months afterand 1 month before the current date.A Datebook event contains:•Asubject—Anameyouassigntotheevent.You can also enter a phone number, Private ID,or Talkgroup number here. After the event isstored, you can call this number from Datebookor when you get a reminder of this event.•A location — The location of the event. You canalso enter a phone number, Private ID, orTalkgroup number here. After the event isstored, you can call this number from Datebookor when you get a reminder of this event.•A start time — The start time automaticallyassigned to an event is the beginning of the day.You can change the start time, or assign no starttime, before storing the event.•A duration — the length of time the event lasts•A date — The date automatically assigned to anevent is the date that was highlighted orselected when you began creating the event.You can change this date before storing theevent.•A repeat — lets you store the event as arecurring event.•A reminder — If an event has a start time, youcan set Datebook to remind you that the event isgoingtostart.•a ring tone for the reminder•a profile that your phone is switched to while theevent is occurring•a Java application that starts when the eventstartsOnly the subject and date are required.Viewing DatebookTo access Datebook:From the main menu, select Datebook.You can view Datebook by the day, by the week, orby the month. You can also view the details of anyevent.In day view, brief information about each event forthat day appears.In week view, events appear as markerscorresponding to their times.In month view, days with events appear with amarker in the corner.
73Creating EventsTo view an event:1Select the day the event occurs.2Select the event.To change the current view:1While viewing Datebook, press m.2Select the view you want.Navigating DatebookTo scroll through Datebook:Scroll left and right using the navigation key. -or-In week view and month view, press *or #.Toseemoreindayview:Scroll up and down using the navigation key.To highlight a day in month view:Enter the date using the keypad.To go to today’s date:1While viewing Datebook, press m.2Select Go To Today.To go to any date in Datebook:1While viewing Datebook, press m.2Select Go To Date.3Selectthedateyouwant.Creating EventsEvery Datebook event must have a subject and bestored to a date. Other information is optional.You may enter the information in any order byscrolling through the event details.After you have entered the information you want,you can press Aunder Done to store the event toDatebook.If you decide you don’t want to store the event:Press Aunder Cancel.To create a Datebook event:1While viewing datebook, press Aunder New.-or-In day view, select [New Event].2To assign a subject to the event:Select Subject.Enter the name. -or-Press Aunder Browse to choose from commonevent names. -or-Enter a phone number, Private ID, or Talkgroupnumber. After the event is stored, you can callthis number.When you are finished, press O.
74Datebook3Ifyouwanttoassignalocationtotheevent:Select Location.Enter the location. -or-Enter a phone number, Private ID, or Talkgroupnumber. After the event is stored, you can callthis number.When you are finished, press O.4The start time automatically assigned to anevent is the beginning of the day. If you want tochange the start time or assign no start time:Select Start.Enter the start time you want. -or-Press Aunder No Time to assign no start time.5Ifyouwanttoassignadurationtotheevent:Select Duration.Select the duration you want. -or-Select Custom to enter a duration.6The date automatically assigned to an event isthe date that was highlighted or selected whenyou began creating the event. To change thedate of the event:Select Date.Enter the date you want.7If you want to make the event a recurring event:Select Repeat.Select the repeat cycle you want.If the event occurs more than once a week:Select Multiple Day. Select the days you want.Press Aunder Done.Select the date you want this event to stoprecurring.8If you want to create a reminder for this event:Select Reminder.Select the reminder time you want. -or-Select Custom to enter a reminder time.Note: If an event has no start time, you can notcreate a reminder for it.9If you have entered all the information you wantfor this event, press Aunder Done.-or-Ifyouwanttoassignaringtone,aprofile,oraJava application to the event, see “AssigningMore Options” on page 75.
75Editing EventsAssigning More OptionsTo assign more options before storing an event:1If you have created a reminder for the event andwant to set the ring tone for that reminder:Select Ring Tone.Select the ring tone you want from the ring tonesstored in your phone.2If you want to assign a profile that your phone isswitched to while the event is occurring:Select Profile.Select the profile you want from the profilesstored in your phone.Your phone switches to this profile when theevent starts and switches back to the previousprofile when the event ends.3IfyouwanttoassignaJavaapplicationtostartwhen the event starts:Select App.Select the application you want from the Javaapplications stored in your phone.If you created a reminder for this event, yourphonepromptsyoutostarttheJavaapplicationwhen you get the reminder.Editing EventsTo change the details of an event:1Select the day the event occurs.2Select the event.3Press Aunder Edit.4Follow the applicable instructions in “CreatingEvents”onpage73toeditthevariousfields.To copy an event to another date:1Select the day the event occurs.2Select the event.3Press m.4Select Copy.5Press Aunder Yes to confirm.6Enter the date you want.7Press O.8If you want to change more information, followthe applicable instructions in “Creating Events”on page 73 to edit the various fields.Deleting Events1Select the day the event occurs.2Select the event.3Press m.4Select Delete.
76Datebook5If the event is not a recurring event, press Oorpress Aunder Yes to confirm. -or-If the event is a recurring event:Select This Event Only to delete only the eventselected in step 2.Select Repeat Event to delete all occurrencesof the event.Receiving RemindersIf you created a reminder for a Datebook event,when the reminder time occurs, your phone notifiesyou with text on the display and a reminder tone.To view more details about the event:Open the flip. -or-Press Aunder View.To dismiss the reminder:If the flip is closed, press ..-or-If the flip is open, press O,pressAunderDismiss, or close the flip.Tip: You can set your phone to power on whenyou receive a reminder. See “CustomizingDatebook Setup” on page 77.For Events with Java ApplicationsIf you assigned a Java application to start when theevent starts, you can start the application when youget the reminder.1Press m.2Select Launch.For Events with Numbers to CallIfyoustoredaphonenumber,PrivateID,orTalkgroup number in the Subject or Location fieldof a Datebook event, you can call or send a callalert to that number from the reminder for thatevent.Making Calls from RemindersYou can make phone calls, Private calls and Groupcalls to numbers in Datebook reminders.To call a number from a reminder:Press s.To make Private calls or Group calls to a numberfrom a reminder:Press the PTT button.
77Making Calls From DatebookMaking Calls From DatebookIfyoustoredaphonenumber,PrivateID,orTalkgroup number in the Subject or Location fieldof a Datebook event, you can call or send a callalert to that number from Datebook.YoucancallthenumberstoredinSubject and thenumber stored in Location if one is a phonenumber and the other is a Private ID or Talkgroupnumber. If both are the same type of number, thenumber in Subject is called or sent a call alert. Tocall or send a call alert to the number stored inLocation, you must delete the number stored inSubject.To make a call or send a call alert:1Highlight or select the event containing thenumber you want to call or send a call alert to.2To make a phone call:Press s.-or-Press m. Select Call # in Event.To make a Private call or group call:Press and hold the PTT button on the side ofyour phone. -or-If you did not include a #before the Talkgroupyou want to call: Press m. Select Talkgroup.To send a call alert:Press m. Select Alert # in Event.Customizing Datebook SetupTo access Datebook set up options:1From the main menu, select Datebook.2Press m.3Select Setup.You can view or change these options:•StartView— sets Datebook to start in day view,week view, or month view when you accessDatebook.•DailyBegin— sets the beginning of your day.Thisistheearliesttimeofdaydisplayedinweekview, if you have a 12-hour day view.•Reminders— If this option is set to Only WhenOn, your phone reminds you of events onlywhen it is on. If this option is set to Always,yourphone powers itself on when you receivereminders. To avoid draining the battery, yourphone then powers itself off after a short time.• Delete After — sets the amount of timeDatebook waits to delete an event after itoccurs.
78Datebook•TimeShift— lets you shift the times of allDatebook events. This is useful if you aretraveling to a different time zone.• Alert Timeout — sets the amount of time a tonecontinues to sound when you receive amessage notification, call alert, or Datebookreminder.•Clock— controls whether the time and dateappear on the idle screen; sets time and dateformat; sets year.
79Installing ApplicationsJava ApplicationsYour phone arrives with Java applications loadedand ready to install. You can download and installmore Java applications.Note: Using Java applications may cause yourphone to use up more battery power thanother uses of your phone.Installing Applications1From the main menu, select Java Apps.2Select the application or suite of applicationsyou want to install.Installation messages appear as the applicationinstalls.3IfyouwanttocreateashortcuttotheJavaapplication on the main menu: Press AunderNext.PressAunder Yes.PressO.4Press Aunder Done.Running ApplicationsTorunanapplicationthathasashortcutonthemain menu:1From the main menu, select the application orsuite of applications you want to run.2Ifyouhaveselectedasuiteofapplications,selecttheapplicationyouwanttorun.To run an application that does not have a shortcuton the main menu:1From the main menu, select Java Apps.2Select the application or suite of applicationsyou want to run.3Ifyouhaveselectedasuiteofapplications,selecttheapplicationyouwanttorun.Tip: If you don’t hear the sounds associated withthe Java application, select Settings >Volume and check the volumes of JavaSpeaker and Java Earpiece.Suspending ApplicationsWhen you suspend an application, it does not stoprunning. It goes to the background so that you canrun another application in the foreground.To suspend an application:Press eor close the flip.To view your suspended applications:From the Java menu, select Suspended Apps.You can have up to 3 applications running at onetime — 1 running in the foreground and 2 in thebackground.
80Java ApplicationsResuming ApplicationsYou can resume a suspended application at anytime. This brings it to the foreground.1From the Java menu, select Suspended Apps.2Select the application you want to resume.Ending ApplicationsToendanapplication:1From the main menu, select Java Apps.2If the application you want to end is part of asuite of applications, select the suite.3Scroll to the application you want to end.Press Aunder End.-or-If End is not one of your options: Press m.Select End.Tip: You can also end applications from theSuspended Apps screen.To end all applications:1From the main menu, select Java Apps.2Scroll to Suspended Apps.3Press m.4Select End All.5Press Oor press Aunder Yes to confirm.6If you want to end all applications without lettingthem exit, press Aunder EndNow.Downloading ApplicationsIf you want to run more Java applications, you candownload them into your phone.Go to www.motorola.com/idenupdate for aselection of Java applications and downloadinginstructions.Deleting ApplicationsTo delete an application:1From the main menu, select Java Apps.2Scroll to the application you want to delete.3Press m.4Select Deinstall.5Press Oor press Aunder Yes to confirm.6When your phone has finished deleting theapplication, press Aunder Done.To delete all Java applications:1From the main menu, select Java Apps.2Scroll to Java System.3Press m.4Select Delete All.
81Managing Memory5Press Oor press Aunder Yes to confirm.Managing MemoryTo view the amount of memory available for Javaapplications:1From the main menu, select Java Apps > JavaSystem.2Press Aunder Next.3To see more memory information, press Aunder Next again.Deleting Java applications frees memory.Note: Java application data is stored in yourphone using the same memory spaceused to store messages, voice records,pictures, ring tones, and wallpaperimages. Deleting some of these otheritems frees memory for Java applications.Shortcuts on the Main MenuWhen you install an application, you can create ashortcut to the application on the main menu.Tocreateashortcuttoanapplicationthatisalready installed:1From the main menu, select Settings >Personalize > Menu Options > Add/RemoveApps.-or-From the main menu: Press m.SelectMainMenu Setup > Add/Remove Apps.2Scroll to view the list of Java applications. Anyapplication that has a shortcut on the main menuhas a checkmark next to it.3Scroll to the application you want to create ashortcut for.4Press O.5Press Aunder Done.Toremoveashortcut:1From the main menu, select Settings >Personalize > Menu Options > Add/RemoveApps.-or-From the main menu: Press m.SelectMainMenu Setup > Add/Remove Apps.2Scroll to view the list of Java applications. Anyapplication that has a shortcut on the main menuhas a checkmark next to it.3Scroll to the application you want to remove theshortcut for.
82Java Applications4Press O.5Press Aunder Done.Java Applications and GPSEnabledSome Java applications can make use of yourphone’s GPS feature to determine the approximategeographical location of your phone. (See “GPSEnabled” on page 84 for more information on theGPS feature.) However, for privacy reasons, youmay not always want Java applications to accessthe location of your phone. Your phone protectsyour privacy by giving you the option to block all orsome Java applications from accessing thelocation of your phone.Setting Privacy for All JavaApplicationsThese options control the privacy of all Javaapplications on your phone:• Restricted — No Java or similar softwareapplications may access the location of yourphone. However, location information may stillbe available to the phone’s owner, fleetmanager, or account administrator.• Unrestricted — All Java applications mayaccess the location of your phone, withoutnotifying you.•ByPermission— When a Java applicationattempts to access the location of your phone,you are prompted to give permission. However,location information may still be available to thephone’s owner, fleet manager, or accountadministrator.See “Setting Privacy Options” on page 89 forinformation on choosing these options.Granting or Denying PermissionIf you choose By Permission, you must grant ordeny each Java application access to the locationof your phone when the application requestsaccess for the first time. You may be required togrant or deny subsequent requests from the sameapplication, depending on the privacy setting youchoose for the individual Java application (see“Setting Privacy for Each Java Application”).When a Java application requests access to thelocation of your phone, a screen appears informingyou.To deny this request:1Press Aunder Deny. The application does notaccess the location of your phone.
83Java Applications and GPS Enabled2Select the denying option you want:• Always — If the application requests accessto the location of your phone again, therequest is denied without notifying you.• For this session — If the applicationrequests access to the location of your phoneagain before you power off your phone, therequest is denied without notifying you.•OnlyOnce— If the application requestsaccess to the location of your phone again,you are prompted to grant or denypermission.To grant this request:1Press Aunder Grant. The application accessesyour phone’s location.2Select the granting option you want:• Always — If the application requests accessto the location of your phone again, therequest is granted without notifying you.• For this session — If the applicationrequests access to the location of your phoneagain before you power off your phone, therequest is granted without notifying you.•OnlyOnce— If the application requestsaccess to the location of your phone again,you are prompted to grant or denypermission.Setting Privacy for Each JavaApplicationAfter a given Java application requests access tothe location of your phone for the first time, youhave the opportunity to set the GPS privacy optionfor that Java application.1From the main menu, select Java Apps.2Scroll to the application or suite of applicationsyouwanttosettheprivacyoptionfor.If the application has requested access to thelocation of your phone, this icon Sappearswhen you highlight the application.3Press m.4Select Permissions.5Select the privacy option you want for thisapplication:•Always— The application always haspermission to access the location of yourphone, without notifying you.•Ask— When the application requests accessto the location of your phone, you areprompted to grant or deny permission (see“Granting or Denying Permission” on page82).• Never — When the application requestsaccess to the location of your phone, therequest is denied without notifying you.
84GPS EnabledGPS EnabledYour phone’s GPS Enabled feature usesinformation from Global Positioning System (GPS)satellites orbiting the Earth to determine theapproximate geographical location of your phone,expressed as latitude and longitude. Theavailability and accuracy of this locationinformation (and the amount of time that it takes tocalculate it) will vary depending on the environmentin which you are using the GPS feature. Forexample, GPS location fixes are often difficult toobtain indoors, in covered locations, between highbuildings, or in other situations where you have notestablished a clear broad view of the sky. SEE:“IMPORTANT: Things to Keep in Mind”.When you make a 911 emergency call, the GPSfeature of your phone can help emergencypersonnel locate you if your phone has adequateaccess to GPS satellite signals and youremergency response center is equipped to processsuch information.You can also use the GPS feature to view yourapproximate location. Location informationappears on the phone’s display.Java applications loaded on your phone can alsorequest your location. If your phone is connected toa laptop computer or similar device, softwarerunning on that device can request your location.To protect your privacy, you can control whetherthese requests are granted.IMPORTANT: Things to Keepin MindIf you are using the GPS feature of your phonewhile driving, please give full attention to drivingand to the road.Where adequate signals from multiple satellitesare not available (usually because your GPSantenna cannot establish a view of a wide area ofopen sky), the GPS feature of your phone WILLNOT WORK. Such situations include but arenot limited to:• In underground locations• Inside of buildings, trains, or other coveredvehicles• Under any other metal or concrete roof orstructure• Between tall buildings or under densetree-cover• Near a powerful radio or television tower
85Making an Emergency Call• When your GPS antenna is covered (forexample, by your hand or other object) orfacing the ground• In temperature extremes outside theoperating limits of your phoneWalking or driving very slowly may alsosubstantially reduce GPS performance.Even where location information can becalculated in such situations, it may take muchlonger to do so, and your location estimate maynot be as accurate. Therefore, in any 911 call,always report the location to the emergencyresponse center if you can and if you cannot,remain on your phone for as long as theemergency response center instructs you.Even where adequate signals from multiplesatellites are available, your GPS feature willonly provide an approximate location, oftenwithin 150 feet (45 meters) but sometimesmuch further from your actual location. Adviceon how to improve GPS performance isprovided in “Enhancing GPS Performance” onpage 87.While the GPS feature of your phone can be avaluable navigational aid, it does not replace theneed for careful navigating and good judgment.Never rely solely on one device for navigation.Remember that the accuracy of the locationinformation and the time needed to obtain it willvary depending on circumstances, particularly theability to receive signals from adequate numbers ofsatellites.On emergency calls, your phone uses assistanceinformation from the phone network to improve thespeed and accuracy of your phone’s locationcalculation: if such assistance informationbecomes unavailable, it may reduce the speed andaccuracy of the location calculation.The satellites used by the GPS feature of yourphone are controlled by the U.S. government andare subject to changes implemented in accordancewith the Department of Defense GPS user policyand the Federal Radionavigation Plan. Thesechanges may affect the performance of the GPSfeature of your phone.Making an Emergency CallDial 911 to be connected to an emergencyresponse center. If you are on an active call, youmust end it before calling 911.When you make an emergency 911 call, the GPSfeature of your phone begins to seek information tocalculate your approximate location. It will takethe GPS feature of your phone some time todetermine your approximate location. Evenwhere your phone has good access to sufficient
86GPS EnabledGPS satellite signals and network assist data, itmay take 30 seconds or more to determine theapproximate location. This time will increase wherethere is reduced access to satellite signals. Whenyour approximate location is determined, it is madeavailable to the appropriate emergency responsecenter.In some cases, your local 911 emergencyresponse center may not be equipped toreceive GPS location information. For thisreason, and because the GPS location informationreported is only approximate or may not beavailable in your location (see “IMPORTANT:Things to Keep in Mind” on page 84), alwaysreport your location to the 911 operator youspeak to when making an emergency call, if able,just as you would when using a phone without GPScapabilities.Note: If you are concerned about whether yourlocal 911 emergency response center isequipped to receive GPS locationinformation, contact your local authorities.In general, if your phone has access to signalsfrom more GPS satellites, your location will bedetermined faster and more accurately than if yourphone has access to signals from fewer GPSsatellites.If your phone does not have adequate access toGPS satellites signals, the location of the nearestcell tower in contact with your phone isautomatically made available to the emergencyresponse center, if the center has the capability toreceive such information.See “Enhancing GPS Performance” on page 87for information on how to help your phonedetermine your location.Viewing Your ApproximateLocation1From the main menu, select GPS > Position.2Scroll to view the entire screen.This displays the following information about thelast time your location was calculated:•The time (as Greenwich Mean Time) and datethat the location was last calculated•The approximate location, expressed as latitudeand longitude•The estimated accuracy of the calculatedlocation. This estimate of accuracy is only a veryrough estimate and may vary substantially fromthe actual accuracy of the approximate locationinformation reported.
87Enhancing GPS Performance•The number of satellites used to calculate thelocation. In general, more satellites make forbetter accuracy.To calculate your location again:Press Aunder Rfrsh.It may take your phone several minutes tocomplete the process of determining your location.During this time, a message usually appears onyour phone’s display saying your phone isscanning for satellites. For tips on getting the bestlocation calculation, see “Enhancing GPSPerformance”.The Position screen displays the updatedinformation.To cancel a location calculation before it iscompleted:Press Aunder Cancel to return to the Positionscreen. -or-Press eto return to the idle screen.Each time approximate location of your phone iscalculated, the latest location information is storedin your phone and remains there even when yourphone is powered off. You will see this informationthenexttimeyouviewthePosition screen.If you received a phone call or alert whileattempting to determine your location, the Positionscreen will disappear, but your phone will continueattempting to determine its location. If it issuccessful, the new location information will bedisplayed the next time you view the Positionscreen.Enhancing GPS PerformanceSometimes the GPS feature of your phone may beunable to complete a location calculationsuccessfully. If this happens when you are makingan emergency call, the location of the nearest celltower in contact with your phone is made availableto the appropriate emergency response center ifthe center has the capability to receive suchinformation. If this happens when you are trying toview your location on the phone’s display, you willsee a message indicating that your phone cannotaccess satellites.
88GPS EnabledTo improve accuracy and increase your chances ofa successful calculation, do the following whileyour phone is determining your approximatelocation:•Stay in the open. The GPS feature works bestwhere there is nothing between your phone anda large amount of open sky. If possible, gooutside, away from tall buildings and foliage.While performance in a building is improved bymoving closer to windows, glass with certain sunshielding films may block satellite signals.•Extend your phone antenna.•Hold your phone to enhance reception. Signalsfrom GPS satellites are transmitted to your GPSantenna, which is in your phone antenna. Holdyour phone away from your body, giving theantenna clear access to satellite signals. Do notcovertheantennaareawithyourfingersoranything else.•Stand still. If possible, stand still until your phoneis finished determining your location. Movingyour phone at a walking pace while your phoneis calculating your approximate location maysubstantially decrease GPS performance.GPS antenna
89Updating Satellite Almanac Data•In a car. When using the GPS Enabled feature ina car, position your phone so that the GPSantenna has good access to GPS signalsthrough the car’s windows. Typically, the GPSantenna has best access to GPS signals in a carwhen placed near a window.Note: Although moving your phone at a walkingpace decreases GPS performance,moving it at the speed of a moving cardoes not.•Stay in network coverage. Depending on whoyour service provider is, the network will provideyour phone with information that helpsdetermine your location more quickly andaccurately.Updating Satellite AlmanacDataAnother way to keep the GPS feature of yourphone working well is to keep your satellitealmanac data up to date.The United States government maintains analmanac of data about where GPS satellites are asthey orbit the Earth. This information is available toyour phone. Keeping your satellite almanac up todate helps your phone determine your locationmore quickly.The almanac contains information about thelocation of satellites, their operational status, andother satellite information. Keeping this informationupdated enhances the performance of your GPSfeature. In most cases, your phone will be able toget a fix in strong satellite signal conditions withoutdated almanac data, but it may take longer.Note: When you make an emergency call, yourphone does not rely upon the almanac todetermine your location.If your satellite almanac data is out of date, yourphone may prompt you to update it. Follow theinstructions that appear on the phone’s display.Youmaybeaskedtogotoawebsiteorcallacustomer care number.Setting Privacy OptionsYour phone’s GPS privacy options control whetherJava applications on your phone or other softwareapplications may view the location of yourphone.You may set your phone to one of theseGPS privacy options.Note: Privacy options do not apply to thetransmission of location informationduring emergency 911 calls.
90GPS EnabledTo set your GPS privacy options:1From the main menu, select GPS > Privacy.2If your GPS PIN security feature is enabled,enter your GPS PIN. (See “Setting the GPS PINSecurity Feature” for more information.)3Select the privacy option you want:• Restricted — No Java or similar softwareapplications may view the location of yourphone. However, location information may stillbe available to the phone’s owner, fleetmanager, or account administrator.• Unrestricted — All applications may view thelocation of your phone, without notifying you.•ByPermission—Whenanapplicationattempts to view the location of your phone,youwillbepromptedtogivepermission.However, location information may still beavailable to the phone’s owner, fleet manager,or account administrator.Setting the GPS PIN Security FeatureTo prevent your GPS privacy settings from beingaltered without your knowledge, your GPS privacyoptioncanbeprotectedbyaPIN.When you receive your phone, the GPS securityfeature is turned off, so you do not have to enter aGPS PIN to access your GPS privacy options. Ifyou turn this feature on, you will be required toenter a GPS PIN to access your GPS privacyoptions.To turn the GPS Enabled security feature on or off:1From the main menu, select Settings >Security > GPS PIN.2Select On or Off.3Enter the current GPS PIN.Note: When you receive your phone, your GPSPIN is 0000.4Press Aunder Ok.To change your GPS PIN:1From the main menu, select Settings >Security > Change Password > GPS PIN.2Enter the current GPS PIN.Note: When you receive your phone, your GPSPIN is 0000.3Press Aunder Ok.4Enter the new 4- to 8-digit GPS PIN.5Press Aunder Ok.6Enter the new 4- to 8-digit GPS PIN to confirm.7Press Aunder Ok.
91Using GPS with Map SoftwareUsing GPS with Map SoftwareYou can use the GPS feature of your phone toprovide approximate location data to a laptopcomputer or similar device that is runninginteractive map software such as that made byDeLorme or Microsoft. This way, if your phone hasgood access to GPS signals, your approximateposition on a map can be made available as youtravel in a vehicle.To do this, connect your phone to your laptop (orother device) with a data cable and set your phoneto transmit data (see “Getting Started” on page 91).Your phone then provides your approximatelocation to the device running the map software,which displays your location on a map. Your phoneprovides an updated location every second and themap software displays your changing location onits map.See “Enhancing GPS Performance” on page 87for more details on obtaining good locationinformation.Note: Because your phone is continuouslydetermining your location, using the GPSfeature of your phone with map softwareuses the phone’s battery power quickly.Software CompatibilityYour phone sends location information to yourlaptop or other device using the standard NationalMarine Electronics Association (NMEA) format.Your phone supports output messages inNMEA-0183 format and supports the followingNMEA-0183 sentences: GGA, GLL, GSA, GSV,RMC, and VTG.Themapsoftwarerunningonyourlaptoporotherdevice must support NMEA 3.0.Getting StartedTo connect your phone to your laptop or otherdevice:1Open the connector cover.connectorcover
92GPS Enabled2With the phone’s display facing up, insert thedata cable’s connector into the accessoryconnector, until you hear a click.3InsertthedataplugintotheCOMportofyourlaptop or other device.Make sure no other application is using the COMport selected.Make sure the COM port settings of your laptop orother device are set to the following:•Bits per second: 4800•Data bits: 8•Parity: None•Stop bits: 1•Flow control: HardwareTo set your phone to send location information toyour laptop or other device:1From the main menu, select GPS > Interface.2Set NMEA OUT to On.Your phone is now sending location data to yourlaptop or other device.To stop your phone from sending location data toyour laptop or other device:Set NMEA OUT to Off.Each time you power your phone on, NMEA OUTis automatically set to Off.
93Creating Voice RecordsVoice RecordsA voice record is a recording you make with yourphone and can play back. You can record notes toyourself or phone calls.Your phone can store up to 20 voice records.Creating Voice RecordsTorecordanotetoyourself:1From the main menu, select VoiceRecord >[New VoiceRec].2Say the message you want to record into themicrophone.Tip: To stop recording before you are finished,press Aunder Pause. To start recordingagain, press Aunder Resume.Tostoprecording and discard the voice record atany time, press Aunder Cancel.3When you are finished recording, press O.Toaddtotheendofvoicerecord:1From the main menu, select VoiceRecord.2Scroll to the voice record you want to add to.3Press m.4Select Add To.5When you are finished recording, press O.To record a phone call:1Whileonanactivecall,pressm.2Select Record.3When you are finished recording, press O.Note: Recording of phone calls is subject toapplicable laws regarding privacy andrecording of phone conversations.Playing Voice Records1From the main menu, select VoiceRecord.2Select the voice record you want to play.3To stop the voice record while it is playing, pressO.Tip: To fast forward, scroll right. To rewind, scrollleft. To pause or resume, press any numberkey.Labeling Voice RecordsWhen you create a voice record, it is labeled withthe time and date it was recorded. You can thenrename it with a custom label.1From the main menu, select VoiceRecord.2Scroll to the voice record you want to label.3Press Aunder Label.4Enter the label you want to assign.
94Voice Records5Press O.Deleting Voice RecordsTo delete a voice record:1From the main menu, select VoiceRecord.2Scroll to the unlocked voice record you want todelete.3Press m.4Select Delete.5Press Oor Aunder Yes to confirm.To delete all voice records:1From the main menu, select VoiceRecord.2Scroll to any voice record.3Press m.4Select Delete All.5Press Oor Aunder Yes to confirm.Locking Voice RecordsWhen you lock a voice record, it cannot be deleteduntil you unlock it.1From the main menu, select VoiceRecord.2Scroll to the voice record you want to lock orunlock.3Press m.4Select Lock to lock the message. -or-Select Unlock to unlock the message.When a voice record is locked, this icon Rappearsnext to it.Managing MemoryTo view the amount of memory available for voicerecords:1From the main menu, select VoiceRecord.2With [New VoiceRec] highlighted, press Aunder Memory.-or-With any voice record highlighted, press m.Select Memory.To free more memory by deleting all unlockedvoice records:1From the voice records memory screen, pressAunder Delete.2Press Oor Aunder Yes to confirm.Note: Voice records are stored in your phoneusing the same memory space used tostore messages, Java application data,pictures, ring tones, and wallpaperimages. Deleting some of these otheritems frees memory for voice records.
95Setting the VolumeCustomizing Your PhoneSetting the VolumeOf the Earpiece and Speaker1From the main menu, select Settings > Volume.2Scroll to Earpiece to set the earpiece volume.-or-Scroll to Speaker to set the speaker volume.3To set the volume:Scroll left or right. -or-Press the volume controls.Of the RingerPress the volume controls.Setting Your Phone to VibrateTo set your phone to vibrate instead of making asound when you receive phone calls, Private calls,group calls, SDG calls, message notifications, andcall alerts, see “Setting Your Phone to Vibrate” onpage 58.To set your phone to vibrate instead of making asound when you receive Private calls, group calls,and SDG calls, even if you want your phone to ringfor other features:1From the main menu, select Settings > 2-WayRadio > Alert Type.Tip: If Alert Type does not appear: From themain menu, select Ring Tones.MakesureVibeAll is set to Off. Repeat step 1.2Select Vibrate to set your phone to vibrate.Tip: Select Silent in step 2 to set your phone toneither vibrate nor make a sound.Changing the Look of YourPhoneWallpaperA wallpaper is an image that appears on the idlescreen.Choosing a Wallpaper1From the main menu, select Settings >Display/Info > Wallpaper > Wallpaper.2Select the wallpaper you want.Tip: If you want to see what the wallpaper lookslike, press Aunder View.
96Customizing Your PhoneSetting Wallpaper to Change AutomaticallyNote: This feature may not be offered by yourservice provider.1From the main menu, select Settings >Display/Info > Wallpaper > Auto Cycle.2Select how often you want the wallpaper tochange.Any of the wallpapers in your phone may appearon your idle screen.Setting Text SizeTo set the size of the text on the internal display:1From the main menu, select Settings >Display/Info > Text Size.2Select the option you want:• Zoom — 11 characters per line• Standard — 14 characters per line• Compressed — 18 characters per lineTo set your phone to briefly display very largedigits when you enter numbers at the idle screen:1From the main menu, select Settings >Display/Info > Large Dialing.2Set this option to Large Digits.Setting ContrastTo set the contrast of the display:1From the main menu, select Settings >Display/Info > Contrast.2To set the contrast of the internal display, selectInt. Display.-or-To set the contrast of the external display, selectExt. Display.3Scroll left or right to set the contrast.Setting the Menu ViewYoucansettheitemsonyourmainmenuandJavaapplications menu to appear as large icons or alist:1From the main menu, select Settings >Display/Info > Menu View.-or-From the main menu: Press m.SelectMainMenu Setup > Menu View.2To choose a list, select List View.-or-To choose large icons, select Icon View.Setting the BacklightA backlight lights the display and keypad when youmake or receive a call, open or close the flip, orpress keys or buttons.
97Temporarily Turning Off CallsTo control how long the backlight stays on:1From the main menu, select Settings >Display/Info > Backlight > Backlight.2Select the number of seconds you want thebacklight to stay on. -or-Select Off if you never want the backlight on.To set the keypad backlight to light up only in lowlight conditions:1From the main menu, select Settings >Display/Info > Backlight > Sensor.2Set this option to On.Temporarily Turning Off CallsSometimes you may want to have your phone on,but turn off its ability to make and receive calls,such as when you are on an airplane.To set your phone so that it cannot make or receivephone calls, Private calls, or group calls; or transferdata:1From the main menu, select Settings >Advanced > Airplane Mode.2Set this option to On.This icon Uappears.To restore your phone’s ability to do all thesethings:Set this option to Off.Using SettingsSettings contains many submenus that let youcustomize your phone.For information on applying groups of settings toyour phone together, see “Profiles” on page 102.Display/Info FeaturesThe Display/Info menu controls how the keypadand display appear:• Wallpaper — changes the wallpaper thatappears on the idle screen.•Palette— changes the color scheme of thedisplay.•TextSize— sets size of text on the display.• Home Icons — controls whether main menuicons appear on the idle screen.• Backlight — controls backlight illumination.•Clock— controls whether the time and dateappear on the idle screen; sets time and dateformat; sets year.•MenuView— controls whether the items onyour main menu and Java applications menuappear as large icons or a list.
98Customizing Your Phone• Large Dialing — sets large digits to appear onthe idle screen when you enter a number.•Contrast— sets the contrast of the display.• Language — sets the language that your phonedisplays.Phone Calls FeaturesThe Phone Calls menu controls how your phonehandles phone calls:•SetLine— sets phone line 1 or phone line 2 asthe active line for outgoing calls.•AnyKeyAns— If this feature is on, you cananswer calls by pressing any key on the keypad.•AutoRedial— sets your phone to automaticallyredial calls you make when the system is busy.•CallWaiting— See “Call Waiting” on page 41.• Auto Ans — sets your phone to automaticallyanswer an incoming call after a specifiednumber of rings. When this feature is on, thephone answers by connecting you to the caller;it does not send the call to voice mail, unlessyou are out of coverage or on the line.• Flip Activation — See “Setting Flip Actions” onpage 44.• Minute Beep — causes a beep to sound everyminute of an active call.• Call Duration — causes the duration of a call toappear on the display when the call ends.•TTY—See“MakingTTYCalls”onpage47.• Notifications — See “Message Notifications” onpage 55.•JavaAppControl— If you have installed aJava application that answers phone calls, thissetting lets you turn that application on.2-Way Radio FeaturesThe 2-Way Radio menu controls how your phonehandles Private calls, group calls, and SDG calls:•Scan— controls whether your phone receivesGroup calls from all the Talkgroups in a Hub.See“SettingTalkgroupScan”onpage69.Note: This feature may not be offered by yourservice provider.• Tkgrp Silent — controls whether you heargroup calls to your Talkgroup. See “Group Calls”on page 49.•TkgrpArea— lets you define your Talkgrouparea.• One Touch PTT — See “Setting One TouchPTT” on page 43.
99Using Settings•AlertType— controls how your phone notifiesyouwhenyoureceivePrivatecalls,groupcalls,and.SDG calls.Personalize FeaturesThe Personalize menu makes main menu itemseasier to access.• Menu Options —Reorder Menu lets youchange the order of the items on the main menuby grabbing and moving them; Add/RemoveApps letsyoucreateashortcuttoaJavaapplication on the main menu.•UpKey— sets the main menu item you accesswhen you scroll up from the idle screen.•DownKey— sets the main menu item youaccess when you scroll down from the idlescreen.• Left Key — sets the main menu item you accesswhen you scroll left from the idle screen.•RightKey— sets the main menu item youaccess when you scroll right from the idlescreen.• Center Key — sets the main menu item youaccess when you press Ofrom the idle screen.• Left Sftkey — sets the main menu item youaccess when you press the left option key fromthe idle screen.• Right Sftkey — sets the main menu item youaccess when you press the right option key fromthe idle screen.•PowerUp— sets the main menu item you seewhen you power on your phone. To set the idlescreen to be the first thing you see when youpower on your phone, select Default Ready.Volume FeaturesThe Volume menu sets the volume of sounds yourphone makes:•Line1— sets ringer volume for phone line 1.•Line2— sets ringer volume for phone line 2.•Messages— sets the volume of messagenotifications and Datebook reminders.• Earpiece — sets the volume of sound comingoutoftheearpiece.• Speaker — sets the volume of sound comingoutofthespeaker.•Keypad— sets the volume of sound associatedwith pressing keys and buttons.• Java Earpiece — sets the volume of soundassociated with Java applications coming out ofthe earpiece.
100Customizing Your Phone• Java Speaker —sets the volume of soundassociated with Java applications coming out ofthe speaker.•Data— sets the volume of sounds that notifyyou that you are receiving a circuit data call.Security FeaturesThe Security menu lets you turn security featureson and off and change passwords:• Phone Lock — turns on a feature that locksyour phone: Lock Now takes effect immediately;Auto Lock takes effect when your phone ispowered off and then on. An unlock code isrequired to enable this feature, to unlock thephone, and to set a new unlock code. Contactyour service provider for your default unlockcode.•KeypadLock— locks the phone’s keypad,either immediately or automatically after a setperiod of inactivity.•SIMPIN— enables and disables your phone’sSIM PIN security feature. See “Turning the PINRequirement On and Off” on page 13.•GPSPIN— enables and disables your phone’sGPS PIN security feature. See “Setting the GPSPIN Security Feature” on page 90.• Change Passwords — changes your phoneunlock code, security code, SIM PIN, and GPSPIN.Advanced FeaturesThe Advanced menu contains advanced and rarelyused Settings features.• Alert Timeout — sets the amount of time a tonecontinues to sound when you receive amessage notification, call alert, or Datebookreminder.• Headset/Spkr — sets headset option. See“Using a Headset” on page 109.•DiscoLights— sets the lights in the externaldisplay to light up when a musical ring tonesounds.Note: Some musical ring tones you download toyour phone may not activate disco lights.• Connectivity —Network ID sets the phone’snetwork IDs and their roaming options under thedirection of your service provider; Master Resetlets your service provider reset your service inthe event of a security or provisioning problem.
101Using Settings• Reset Defaults —Reset Settings returns allsettings to their original defaults; Reset Allreturns all settings to their original defaults anderases all stored lists. Use only under thedirection of your service provider.• ReturntoHome— controls how long the recentcalls list displays after calls.• Airplane Mode — prevents your phone frommaking or receiving phone calls, Private calls,group calls, or SDG calls; or transferring data.• Phone Only — prevents your phone frommaking or receiving Private calls, group calls, orSDG calls; or transferring data.Note: This feature may not be offered by yourservice provider.•BaudRate— sets the baud rate at which yourphone communicates with a laptop computer,PC, or similar device.
102ProfilesProfilesA profile is a group of settings saved together sothat you can apply them to your phone easily.A profile contains these settings:•RingTones— sets all options described in“Ring Tones” on page 58, except assigning ringtones to Contacts.• Display/Info —setsWallpaper,Color Palette,Text Size,andBacklight options. See“Display/Info Features” on page 97.• Phone Calls —setsSet Line and Auto Ansoptions. See “Phone Calls Features” on page98.• Volume — sets all options described in “VolumeFeatures” on page 99.•CallFilter— controls which calls, call alerts,and message notifications your phone respondsto. See “Setting Call Filtering” on page 105.• Advanced — sets headset option. See “Using aHeadset” on page 109.Your phone arrives with pre-set profiles. You canalso create your own profiles.Viewing ProfilesTo view the profiles stored in your phone:1From the main menu, select Profiles.2Scrolltotheprofileyouwanttoview.Tip: The profile that is currently in effect on yourphone has a checkmark next to it.3Press Aunder View.4Scroll to view settings.Switching ProfilesTo apply a profile to your phone:1From the main menu, select Profiles.2Scrolltotheprofileyouwanttoapply.3Press O.The profile you selected is now in effect.How Changing SettingsAffects ProfilesMany of the settings contained in profiles can beset without switching or editing profiles — forexample, by selecting Settings or Ring Tones toset options, or by setting the volume of the phone’sring using the volume controls.
103Temporary ProfilesWhen you do this, your phone either:•Updates the profile in effect to reflect thesechanges, without notifying you -or-•Creates a temporary profile that contains thesechangesNote: This feature may not be offered by yourservice provider.To set your phone to create a temporary profilethat contains changes you make to settings:1From the main menu, select Profiles.2Press m.3Select Setup > Temp Profile.4Set this option to On.To set your phone to update the profile in effect toreflect any changes you make to settings:Set Temp Profile to Off in step 4.If your service provider does not offer the TempProfile option, your phone always updates theprofile in effect to reflect the changes you make tosettings.Temporary ProfilesIf your phone is set to create temporary profiles, atemporary profile is created when you makechanges to settings without switching or editingprofiles.A temporary profile is based on the profile in effectwhen you made the changes, but reflects thechanged settings. Making more changes furtherupdates the temporary profile, for as long as it is ineffect.A temporary profile stays in effect until you switchprofiles, power off your phone, or delete it (or theprofile it is based on) from the list of profiles.If you do not store a temporary profile, it is deletedwhen you switch profiles or power off your phone.A temporary profile is automatically given the samename as the profile it is based on, but with anasterisk (*) in front of it.When you view a temporary profile’s settings, theoptions that differ from the profile it is based onhave an asterisk in front of them.Storing a Temporary ProfileTo store a temporary profile as a new profile:1From the main menu, select Profiles.
104Profiles2Scroll to the temporary profile.3Press m.4Select StoreAsNew.5Enter the name you want to give the profile.When you are finished, press O.To overwrite the profile the temporary profile isbased on:1From the main menu, select Profiles.2Scroll to the temporary profile.3Press m.4Select Store Changes.The temporary profile is stored with the name ofthe profile it is based on. The profile it is based on,as it existed before you made changes to settings,is gone.Creating Profiles1From the main menu, select Profiles.2Select [New Profile].-or-Scroll to any profile. Press m. Select New.3Enter the name you want to give the profile.When you are finished, press O.4If you want to base this profile on an existingprofile: Select Copy from. Select the profile youwant to base this profile on. If you do not choosea profile to copy from, the new profile is basedon a default profile.5Press Aunder Create.6Scroll through the list of options and set theirvalues.7Press Aunder Done.Editing Profiles1From the main menu, select Profiles.2Scrolltotheprofileyouwanttoedit.3Press m.4Select Edit.5Scroll through the list of options and set theirvalues.Deleting ProfilesTo delete a profile:1From the main menu, select Profiles.2Select the profile you want to delete.Note: A temporary profile is automaticallydeleted when the profile it is based on isdeleted.3Press m.4Select Delete.
105Setting Call Filtering5Press Oor press Aunder Yes to confirm.To delete all profiles:1From the main menu, select Profiles.2Press m.3Select Delete All.4Press Oor press Aunder Yes to confirm.Setting Call FilteringThe call filtering setting in each profile lets youcontrol which calls, call alerts, and messagenotifications your phone notifies you of, and whichit ignores.To set call filtering:1While setting options for a profile, select CallFilter.2To set filtering options for phone calls, selectPhone.•Offsets your phone to notify you of all phonecalls.•Allsets your phone to ignore all phone calls.•AllContactssets your phone to notify youonly of phone calls from numbers stored inContacts.•SomeCntcssets your phone to notify youonly of phone calls from numbers you selectfrom Contacts.3If you set the Phone option to Some Cntcs,select up to 5 Contacts entries that containphone numbers you want to be notified of callsfrom.When you are finished, press Aunder Done.4To set filtering options for Private calls and groupcalls, select Prvt/Grp.•Offsets your phone to notify you of all Privatecalls and group calls.•Onsets your phone to ignore all Private callsand group calls.5To set filtering options for SDG calls, selectSDGC.•Offsets your phone to notify you of all SDGcalls.•Onsets your phone to ignore all SDG calls.6To set filtering options for call alerts, selectAlerts.•Offsets your phone to notify you of all callalerts.•Onsets your phone to ignore all call alerts.7To set filtering options for message notifications,select Notifications.
106Profiles•Offsets your phone to notify you of allmessages.• Voice Messages sets your phone not tosound a tone or vibrate when you receivevoice messages.• Text Messages sets your phone not to soundatoneorvibratewhenyoureceivetextmessages.•Allsets your phone not to sound a tone orvibrate when you receive any message.Note: Whenyoureceiveatypeofmessageyouhave set not to sound a tone or vibrate,the message notification screen appearsas usual.8Press Aunder Done.
107Creating a ShortcutShortcutsShortcuts lets you access most menu options bypressing a number on your keypad (1 through 9) orsaying the voice name of the shortcut. You createtheshortcutandthenuseittotakeyoutothatscreen any time.Creating a ShortcutNote: When you receive your phone, all numberkeys may already be assigned toshortcuts. If this is the case, you cancreate new shortcuts by deleting orreplacing existing shortcuts.1Go to the menu item you want to create ashortcut for.Forexample,ifyouwanttocreateashortcuttothe screen for creating a new Contacts entry:From the main menu, select Contacts,thenhighlight [New Contact].2Press and hold muntil a confirmation screenappears.3Press Oor press Aunder Yes.4Select Key.5Press the number key you want to assign to theshortcut.6Press O.7Ifyouwanttorecordavoicenamefortheshortcut: Select Vo ice.Asdirectedbythescreen prompts, say and repeat the name youwant to assign to the number. Speak clearly intothe microphone.8Press Aunder Done.9If the number key you chose is already assignedto a shortcut, a prompt appears asking if youwant to replace the existing shortcut.Press Aunder Yes to replace the existingshortcut. -or-Press Aunder No ifyouwanttokeeptheexisting shortcut and assign another number keyto the shortcut.Using a ShortcutIf you know the shortcut number:1From the idle screen, press m.2On your keypad, press the number assigned tothe shortcut.If you do not know the shortcut number:1From the main menu, select Shortcuts.2Scroll to the shortcut you want to use. -or-
108ShortcutsIfyouassignedavoicenametotheshortcut:Press and hold t. Say the voice name intoyour phone. The shortcut with that voice name isthen highlighted.3Press O.Editing a ShortcutTo change the number assigned to a shortcut:1From the main menu, select Shortcuts.2With any shortcut highlighted, press m.3Select Reorder.4Scroll to the shortcut you want to move.5Press Aunder Grab.6Scroll to the place where you want the shortcutto appear.7Press Aunder Insert.8Repeat step 4 through step 7 for all the itemsyou want to move.9Press Aunder Done.To change the number or voice name assigned toashortcut:1From the main menu, select Shortcuts.2Highlight any shortcut.3Press Aunder Edit.4With Key or Voice highlighted, press Otochange assignments.Deleting ShortcutsTo delete a shortcut:1From the main menu, select Shortcuts.2Scroll to the shortcut you want to delete.3Press m.4Select Delete.5Press Oor press Aunder Yes to confirm.To delete all shortcuts:1From the main menu, select Shortcuts.2With any shortcut highlighted, press m.3Select Delete All.4Press Oor press Aunder Yes to confirm.
109Attaching a HeadsetUsing a HeadsetIfyouuseaheadsetorsimilardevicewithyourphone, you can set your phone to send incomingsound to the headset only, or to the headset andthe speaker at the same time:1From the main menu, select Settings >Advanced > Headset/Spkr.2Select HdsetOnly to send incoming sound tothe headset only. -or-Select Hdset&Spkr to send incoming sound tothe headset and ring tones to the speaker.Note: If you are using your phone with aheadset, and you have the Flip to Endoption set to On, closing your flip sendsincoming sound to the headset and doesnot end the call. See “Setting Flip Actions”on page 44.Attaching a Headset1Lift the audio jack cover.2Insert the headset connector firmly into theaudio jack. You may have to rotate the headsetconnector until it fits securely into the audio jack.Using a Remote PTT ButtonIf you are using a headset or other accessory witha remote PTT button, you can use the remote PTTbutton for phone calls and Private calls.For phone calls, use the remote PTT button toanswer calls, switch between calls, and end calls.HoldtheremotePTTbuttonforlessthan2secondstoanswercallsandswitchbetweencalls.Hold the remote PTT button for more than 2seconds to end calls.For Private calls, use the remote PTT button asyou would the PTT button on your phone.Note: When using a headset, the PTT button onyour phone works the same way as whenyou are not using a headset. Soundsassociated with Private calls and groupcalls are heard through the headset.
110Understanding Status MessagesUnderstanding StatusMessagesYou may receive status messages under certainconditions. Before contacting Customer Care, notethe message, numeric code, and the conditionsunder which it appeared. The following table listsand describes status messages.Note: When your flip is closed, the internaldisplay screen shows a shortened versionof the status message displayed in theexternal screen. To see complete statusmessages, open the flip.StatusMessages(internaldisplay)StatusMessages(externaldisplay)MessageDescriptionNumber Notin ServiceNumber Not inServiceThe number that youentered is not valid.Not Avail. User NotAvailableThe phone that youcalled is either busy, outof coverage, or turnedoff. Please try againlater.Not Avail. User NotAuthorizedThe person that youcalled has notpurchased this service.Failed Please TryLaterThis service istemporarily notavailable. Please tryagain later.Restricted ServiceRestrictedThis service wasrestricted by yourservice provider, or thisservice was notpurchased.Not Avail. Service NotAvailableYou are either out ofcoverage or havingproblems withprovisioning.System Busy System Busy The system isexperiencing heavytraffic. Please try againlater.Failed ServiceConflictThis service cannot beenabled because anincompatible servicehas already been turnedon.StatusMessages(internaldisplay)StatusMessages(externaldisplay)MessageDescription
111Try Again Please TryAgainAn error occurred.Please try again.Wrong PIN You have entered anincorrect PIN number.Please EnterSpecial CodeYouhaveinsertedaSIMcard that will not workwith a your serviceprovider phone. ContactCustomer Care if youbelieve this is a validSIM card.Self Check Self CheckError +Number CodeA fault was detectedwith your phone. If thiserror recurs, note theerror code and contactCustomer Care.Self Check Self Check Fail+ NumberCodeAn operational fault wasdetected with yourphone. Note the numericcode, turn your phoneoff, and contactCustomer Care.StatusMessages(internaldisplay)StatusMessages(externaldisplay)MessageDescriptionPIN Blocked PIN BlockedCall YourProviderThe incorrect PIN wasentered 3 consecutivetimes. You will be unableto place or receive callson your phone. ContactCustomer Care to havethem obtain the PINUnblocking Key (PUK)code.Insert SIM Insert SIM Your SIM card is notbeing detected. Pleasecheck to ensure that youhave inserted the SIMcard correctly into yourphone.Enter PIN Enter SIM PIN Please enter your 4- to8- digit SIM PIN code.Unit Lock Enter UnlockCodeAuto Phone Lock isactivated. Enter yourunlock code.Low Memory New BrowserMessageMemory Full!Warns of low memoryfor Net Alerts.StatusMessages(internaldisplay)StatusMessages(externaldisplay)MessageDescription
112Understanding Status MessagesScanning forSatellitesSearching for GPSsatellites.Unable toLocate SatsCould not find GPSsatellites.Technical Error A problem occurred inyour phone’s GPScircuitry. If this erroroccurs, contactCustomer Care.StatusMessages(internaldisplay)StatusMessages(externaldisplay)MessageDescription
113RF Operational CharacteristicsSafety and GeneralInformationIMPORTANT INFORMATION ON SAFE ANDEFFICIENT OPERATION.READ THIS INFORMATION BEFORE USINGYOUR INTEGRATED MULTI-SERVICEPORTABLE RADIO.RF OperationalCharacteristicsYour radio product contains a radio frequencytransmitter to convey the information you wish tosend as well as occasional automatic signals usedto sustain connection to the wireless network, anda receiver which enables you to receivecommunication and connection information fromthe network.Portable Radio ProductOperation and EME ExposureYour Motorola radio product is designed to complywith the following national and internationalstandards and guidelines regarding exposure ofhuman beings to radio frequency electromagneticenergy (EME):•United States Federal CommunicationsCommission, Code of Federal Regulations; 47CFR part 2 sub-part J.•American National Standards Institute (ANSI) /Institute of Electrical and Electronics Engineers(IEEE). C95. 1-1992.•Institute of Electrical and Electronics Engineers(IEEE). C95. 1-1999 Edition.•International Commission on Non-IonizingRadiation Protection (ICNIRP) 1998.•Ministry of Health (Canada). Safety Code 6.Limits of Human Exposure to RadiofrequencyElectromagnetic Fields in the Frequency Rangefrom 3 kHz to 300 GHz, 1999.•Australian Communications AuthorityRadiocommunications (ElectromagneticRadiation - Human Exposure) Standard 2003.•ANATEL, Brasil Regulatory Authority, Resolution303 (July 2, 2002) "Regulation of the limitation ofexposure to electrical, magnetic, andelectromagnetic fields in the radio frequencyrangebetween9kHzand300GHz.""Attachment to Resolution 303 from July 2,2002."
114Safety and General InformationTo assure optimal radio product performanceand make sure human exposure to radiofrequency electromagnetic energy is within theguidelines set forth in the above standards,always adhere to the following procedures:Phone OperationWhen placing or receiving a phone call, hold yourradio product as you would a wireline telephone.Speak directly into the microphone.Two-way radio operation•When using your radio product asa traditional two-way radio, holdthe radio product in a verticalposition with the microphoneone to two inches (2.5 to 5 cm)away from the lips.•Your radio product has been designed andtested to comply with national and internationalstandards and guidelines regarding humanexposure to RF electromagnetic energy, whenoperated in the two-way mode (at the face, or atthe abdomen when using an audio accessory) atusage factors of up to 50% talk/50% listen.•Transmit no more than the rated duty factor of50%ofthetime.Totransmit(talk),pushthePush-To-Talk (PTT) button. To receive calls,release the PTT button. Transmitting 50% of thetime or less, is important because this radiogenerates measurable RF energy only whentransmitting (in terms of measuring for standardscompliance).Body-worn operationTo maintain compliance with FCC RF exposureguidelines, if you wear a radio product on yourbody when transmitting, always place the radioproduct in a Motorola approved clip, holder,holster, case or body harness for this product.Use of non-Motorola-approved accessories mayexceed FCC RF exposure guidelines. If you donot use a Motorola approved body-wornaccessory and are not using the radio productin the intended use positions along side thehead in the phone mode or in front of the facein the two-way radio mode, then ensure theantenna and the radio product are kept thefollowing minimum distances from the bodywhen transmitting• Phone or Two-way radio mode: one inch (2.5cm)• Data operation using any data feature with orwithout an accessory cable: one inch (2.5cm)
115Portable Radio Product Operation and EME ExposureAntenna CareUse only the supplied or an approvedreplacement antenna. Unauthorized antennas,modifications, or attachments could damage theradio product and may violate FCC regulations.DO NOT hold the antenna when the radioproduct is “IN USE”. Holding the antenna affectscall quality and may cause the radio product tooperate at a higher power level than needed.Approved AccessoriesFor a list of approved Motorola accessories call1-800-453-0920, or visit our website atwww.motorola.com/iden.ALL MODELS WITH FCC ID AZ489FT5841 MEET THEGOVERNMENT’S REQUIREMENTS FOR EXPOSURETO RADIO WAVES.Your wireless phone is a radio transmitter and receiver. Itis designed and manufactured not to exceed the emissionlimits for exposure to radiofrequency (RF) energy set bythe Federal Communications Commission of the U.S.Government. These limits are part of comprehensiveguidelines and establish permitted levels of RF energy forthe general population. The guidelines are based onstandards that were developed by independent scientificorganizations through periodic and thorough evaluation ofscientific studies. The standards include a substantialsafety margin designed to assure the safety of all persons,regardless of age and health.The exposure standard for wireless mobile phonesemploys a unit of measurement known as the SpecificAbsorption Rate, or SAR. The SAR limit set by the FCC is1.6W/kg.1Tests for SAR are conducted using standardoperating positions reviewed by the FCC with the phonetransmitting at its highest certified power level in all testedfrequency bands. Although the SAR is determined at thehighest certified power level, the actual SAR level of thephone while operating can be well below the maximumvalue. This is because the phone is designed to operate atmultiple power levels so as to use only the power requiredto reach the network. In general, the closer you are to awireless base station antenna, the lower the power output.Before a phone model is available for sale to the public, itmust be tested and certified to the FCC that is does notexceed the limit established by the government-adoptedrequirement for safe exposure. The tests are performed inpositions and locations (e.g., at the ear and worn on thebody) as required by the FCC for each model. The highestSAR value for this model phone when tested for use at theear is 0.68 W/kg and when tested on the body, asdescribed in this user guide, is 1.38 W/kg during packetdata transmission. (Body-worn measurements differamong phone models, depending upon availableaccessories and FCC requirements.)2While there may be differences between the SAR levels ofvarious phones and at various positions, they all meet thegovernment requirement for safe exposure.
116Safety and General InformationThe FCC has granted an Equipment Authorization for thismodel phone with all reported SAR levels evaluated as incompliance with the FCC RF exposure guidelines. SARinformation on this model phone is on file with the FCCand can be found under the Display Grant section ofhttp://www.fcc.gov/oet/fccid after searching on FCC IDAZ489FT5841.Additional information on Specific Absorption Rates (SAR)can be found on the Cellular Telecommunications IndustryAssociation (CTIA) web-site at http://www.wow-com.com.1In the United States and Canada, the SAR limit formobile phones used by the public is 1.6 watts/kg (W/kg)averaged over one gram of tissue. The standardincorporates a substantial margin of safety to giveadditional protection for the public and to account for anyvariations in measurements.2The SAR information reported to the FCC includes theFCC-accepted Motorola testing protocol, assessmentprocedure, and measurement uncertainty range for thisproduct.ElectromagneticInterference/CompatibilityNote: Nearly every electronic device issusceptible to electromagneticinterference (EMI) if inadequatelyshielded, designed or otherwiseconfigured for electromagneticcompatibility.FacilitiesTo avoid electromagnetic interference and/orcompatibility conflicts, turn off your radio product inany facility where posted notices instruct you to doso. Hospitals or health care facilities may be usingequipment that is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your radioproduct when on board an aircraft. Any use of aradio product must be in accordance withapplicable regulations per airline crew instructions.Medical DevicesPacemakersThe Advanced Medical Technology Association(AdvaMed) recommends that a minimumseparation of 6 inches (15 cm) be maintainedbetween a handheld wireless radio product and apacemaker. These recommendations areconsistent with those of the U.S. Food and DrugAdministration.Persons with pacemakers should:•ALWAYS keep the radio product more than 6inches (15 cm) from their pacemaker when theradio product is turned ON.
117Operational Warnings•Not carry the radio product in a breast pocket.•Use the ear opposite the pacemaker to minimizethe potential for interference.•Turn the radio product OFF immediately if youhave any reason to suspect that interference istaking place.Hearing AidsSome digital wireless radio products may interferewith some hearing aids. In the event of suchinterference, you may want to consult your hearingaid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical device,consult the manufacturer of your device todetermine if it is adequately shielded from RFenergy. Your physician may be able to assist youin obtaining this information.Use While DrivingCheck the laws and regulations on the use of radioproducts in the area where you drive. Always obeythem.When using the radio product while driving, please:•Give full attention to driving and to the road.•Use hands-free operation, if available.•Pull off the road and park before making oranswering a call if driving conditions so require.Operational WarningsFor Vehicles with an AirBagDo not place a portable radio product in the areaover the air bag or in the air bag deployment area.Air bags inflate with great force. If a portable radiois placed in the air bag deployment area and the airbag inflates, the radio product may be propelledwith great force and cause serious injury tooccupants of the vehicle.Potentially Explosive AtmospheresTurn off your radio product prior to entering anyarea with a potentially explosive atmosphere,unless it is a radio product type especially qualifiedfor use in such areas as “Intrinsically Safe” (forexample, Factory Mutual, CSA, or UL approved).Do not remove, install, or charge batteries in suchareas. Sparks in a potentially explosiveatmosphere can cause an explosion or fireresulting in bodily injury or even death.
118Safety and General InformationNote: The areas with potentially explosiveatmospheres referred to above includefueling areas such as below decks onboats, fuel or chemical transfer orstorage facilities, areas where the aircontains chemicals or particles, suchas grain, dust or metal powders, andany other area where you wouldnormally be advised to turn off yourvehicle engine. Areas with potentiallyexplosive atmospheres are often butnot always posted.Blasting Caps and AreasTo avoid possible interference with blastingoperations, turn off your radio product when youare near electrical blasting caps, in a blasting area,or in areas posted: “Turn off two-way radio”. Obeyall signs and instructions.Operational CautionsBatteriesAll batteries can cause property damage and/orbodily injury, such as burns if a conductive materialsuch as jewelry, keys, or beaded chains touchesexposed terminals. The conductive material maycomplete an electrical circuit (short circuit) andbecome quite hot. Exercise care in handling anycharged battery, particularly when placing it insidea pocket, purse, or other container with metalobjects. To reduce the risk of injury, batteriesshould not be exposed to fire, disassembled, orcrushed.Cleaning and Drying ConsiderationsUsing a leather carry case may help protect thesurfaces and help prevent liquids (e.g., rain) fromentering into the interior of the radio product. Thisproduct is not water proof, and exposing the unit toliquids may result in permanent damage to the unit.If your radio product interior gets wet, then do nottrytoacceleratedryingwiththeuseofanovenoradryer as this will damage the radio product andvoid the warranty. Instead, do the following:1Immediately power off the radio product.2Remove Battery and SIM card (if so equipped)from radio product.3Shake excess liquid from radio product.4Place the radio product and battery in an areathat is at room temperature and has good airflow.5Let the radio product, battery, and SIM card dryfor 72 hours before reconnecting the batteryand/or powering on the radio product.
119Accessory Safety InformationIf the radio product does not work after followingthe steps listed above, contact your dealer forservicing information.Clean the external surfaces of the radio productwithadampcloth,usingamildsolutionofdishwashing detergent and water. Somehousehold cleaners may contain chemicals thatcould seriously damage the radio product. Avoidthe use of any petroleum-based solvent cleaners.Also, avoid applying liquids directly on the radioproduct.Accessory Safety InformationImportant: Save these accessory safetyinstructions.•Before using any battery or battery charger, readall the instructions for and cautionary markingson (1) the battery, (2) the battery charger, whichmay include a separate wall-mounted powersupply or transformer, and (3) the radio productusing the battery.•Do not expose any battery charger to water,rain, or snow as they are designed for indoor orin-vehicle use only.•To reduce the risk of damage to the cord or plug,pull by the plug rather than the cord when youdisconnect the battery charger from the powersource outlet.•Do not operate any battery charger with adamaged cord or plug — replace themimmediately.•Battery chargers may become warm duringoperation, but not hot. If it becomes hot to thetouch, unplug it from the power outletimmediately and discontinue its use.•Use of a non-recommended attachment to abattery charger may result in a risk of fire,electric shock, or injury to persons.•Make sure the battery charger power cord islocated so that it will not be stepped on, trippedover, or subjected to damage or stress.Warning: To reduce the risk of injury,charge only the rechargeablebatteries described in “Battery Useand Maintenance” on page 5. Othertypes of batteries may burst, causingpersonal injury and damage.
120Safety and General Information•An extension cord should not be used with anybattery charger unless absolutely necessary.Useofanimproperextensioncordcouldresultin a risk of fire and electric shock. If an extensioncord must be used, make sure that:•The pins on the plug of the extension cord arethe same number, size, and shape as thoseon the plug of the charger.•The extension cord is properly wired and ingood electrical condition.•The cord size is 18AWG for lengths up to 100feet and 16AWG for lengths up to 150 feet.•Do not operate any battery charger if it hasreceived a sharp blow, has been dropped, orhas been damaged in any way; take it to aqualified service technician.•Do not disassemble a battery charger; take ittoaqualifiedservicetechnicianwhenserviceor repair is required. Incorrect reassemblymay result in a risk of electric shock or fire.•Maximum ambient temperature around thepower supply or transformer of any batterycharger should not exceed 40°C (104°F).•The output power from the power supply ortransformer must not exceed the rating givenon the Desktop Dual-Pocket Charger.•The disconnection from the line voltage ismade by unplugging the power supply fromthe AC receptacle.•To reduce risk of electric shock, unplug anybattery charger from the outlet beforeattempting any maintenance or cleaning.For optimum charging performance, turn off theradio product while charging it in any batterycharger.
121MOTOROLA LIMITEDWARRANTYNote: FOR IDEN SUBSCRIBER PRODUCTS,ACCESSORIES AND SOFTWAREPURCHASED IN THE UNITED STATESOR CANADAWhat Does this Warranty Cover?Subject to the exclusions contained below,Motorola, Inc. warrants its Motorola iDEN DigitalMobile and Portable Handsets ("Products"),Motorola-branded or certified accessories sold foruse with these Products ("Accessories") andMotorola software contained on CD-Roms or othertangible media and sold for use with theseProducts ("Software") to be free from defects inmaterials and workmanship under normalconsumer usage for the period(s) outlined below.Thislimitedwarrantyisaconsumer'sexclusiveremedy, and applies as follows to newProducts, Accessories and Softwarepurchased by consumers in the United Statesor Canada, which are accompanied by thiswritten warranty:PRODUCTSCOVEREDLENGTH OFCOVERAGEProducts as definedabove.One (1) year from thedate of purchase by thefirst consumerpurchaser of theproduct.Accessories asdefined above.One (1) year from thedate of purchase by thefirst consumerpurchaser of theproduct.Products orAccessories that areRepaired or Replaced.The balance of theoriginal warranty orfor ninety (90) daysfrom the date returnedto the consumer,whichever is longer.Software as definedabove. Applies only tophysical defects in themedia that embodiesthe copy of the software(e.g. CD-ROM, orfloppy disk).Ninety (90) days fromthe date of purchase.
122MOTOROLA LIMITED WARRANTYWhat is not covered? (Exclusions)Normal Wear and Tear. Periodic maintenance,repair and replacement of parts due to normal wearand tear are excluded from coverage.Ornamental Decorations.Ornamentaldecorations such as emblems, graphics,rhinestones, jewels, gemstones and their settings,and other decorative elements, are excluded fromcoverage.Batteries. Only batteries whose fully chargedcapacity falls below 80% of their rated capacity andbatteries that leak are covered by this limitedwarranty.Abuse & Misuse. Defects or damage that resultfrom: (a) improper operation, storage, misuse orabuse, accident or neglect, such as physicaldamage (cracks, scratches, etc.) to the surface ofthe product resulting from misuse; (b) contact withliquid, water, rain, extreme humidity or heavyperspiration, sand, dirt or the like, extreme heat, orfood; (c) use of the Products or Accessories forcommercial purposes or subjecting the Product orAccessory to abnormal usage or conditions; or (d)other acts which are not the fault of Motorola, areexcluded from coverage.Use of Non-Motorola Products andAccessories. Defects or damage that result fromthe use of Non-Motorola branded or certifiedProducts, Accessories, Software or otherperipheral equipment are excluded from coverage.Unauthorized Service or Modification.Defectsor damages resulting from service, testing,adjustment, installation, maintenance, alteration,including without limitation, software changes, ormodification in any way by someone other thanMotorola, or its authorized service centers, areexcluded from coverage.Altered Products. Products or Accessories with(a) serial numbers or date tags that have beenremoved, altered or obliterated; (b) broken seals orthat show evidence of tampering; (c) mismatchedboard serial numbers; or (d) nonconforming ornon-Motorola housings, antennas, or parts, areexcluded from coverage.Communication Services. Defects, damages, orthe failure of Products, Accessories or Softwaredue to any communication service or signal youmay subscribe to or use with the Products,AccessoriesorSoftwareisexcludedfromcoverage.
123Software Embodied in Physical Media. Nowarranty is made that the software will meet yourrequirements or will work in combination with anyhardware or software applications provided by thirdparties, that the operation of the software productswill be uninterrupted or error free, or that all defectsin the software products will be corrected.Software NOT Embodied in Physical Media.Software that is not embodied in physical media(e.g. software that is downloaded from theinternet), is provided "as is" and without warranty.Who is covered? This warranty extends only tothe first consumer purchaser, and is nottransferable.What will Motorola Do? Motorola, at its option,will at no charge repair, replace or refund thepurchase price of any Products, Accessories orSoftware that does not conform to this warranty.We may use functionally equivalentreconditioned/refurbished/pre-owned or newProducts, Accessories or parts. No data, softwareor applications added to your Product, Accessoryor Software, including but not limited to personalcontacts, games and ringer tones, will bereinstalled. To avoid losing such data, softwareand applications please create a back up prior torequesting service.How to Obtain Warranty Service or OtherInformation? To obtain service or information,please call:Motorola iDEN Customer Services1-800-453-0920 or 954-723-4910TTY-877-483-2840Or visit us online athttp://www.motorola.com/iden/supportYou will receive instructions on how to ship theProducts, Accessories or Software, at yourexpense, to a Motorola Authorized Repair Center.To obtain service, you must include: (a) a copy ofyour receipt, bill of sale or other comparable proofof purchase; (b) a written description of theproblem; (c) the name of your service provider, ifapplicable; (d) the name and location of theinstallation facility (if applicable) and, mostimportantly; (e) your address and telephonenumber.What Other Limitations Are There? ANYIMPLIED WARRANTIES, INCLUDING WITHOUTLIMITATION THE IMPLIED WARRANTIES OFMERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE, SHALL BE LIMITEDTO THE DURATION OF THIS LIMITEDWARRANTY, OTHERWISE THE REPAIR,REPLACEMENT, OR REFUND AS PROVIDEDUNDER THIS EXPRESS LIMITED WARRANTY IS
124MOTOROLA LIMITED WARRANTYTHE EXCLUSIVE REMEDY OF THECONSUMER, AND IS PROVIDED IN LIEU OFALL OTHER WARRANTIES, EXPRESS OFIMPLIED. IN NO EVENT SHALL MOTOROLA BELIABLE, WHETHER IN CONTRACT OR TORT(INCLUDING NEGLIGENCE) FOR DAMAGES INEXCESS OF THE PURCHASE PRICE OF THEPRODUCT, ACCESSORY OR SOFTWARE, ORFOR ANY INDIRECT, INCIDENTAL, SPECIAL ORCONSEQUENTIAL DAMAGES OF ANY KIND, ORLOSS OF REVENUE OR PROFITS, LOSS OFBUSINESS, LOSS OF INFORMATION OR DATA,SOFTWARE OR APPLICATIONS OR OTHERFINANCIAL LOSS ARISING OUT OF OR INCONNECTION WITH THE ABILITY OR INABILITYTO USE THE PRODUCTS, ACCESSORIES ORSOFTWARE TO THE FULL EXTENT THESEDAMAGES MAY BE DISCLAIMED BY LAW.Some states and jurisdictions do not allow thelimitation or exclusion of incidental orconsequential damages, or limitation on thelength of an implied warranty, so the abovelimitations or exclusions may not apply to you.This warranty gives you specific legal rights,and you may also have other rights that varyfrom state to state or from one jurisdiction toanother.Laws in the United States and other countriespreserve for Motorola certain exclusive rights forcopyrighted Motorola software such as theexclusive rights to reproduce and distribute copiesof the Motorola software. Motorola software mayonly be copied into, used in, and redistributed with,theProductsassociatedwithsuchMotorolasoftware. No other use, including without limitationdisassembly of such Motorola software or exerciseof the exclusive rights reserved for Motorola, ispermitted.
125Limited WarrantyMotorolaCommunicationProducts (International)Note: This Warranty applies in Singapore andthe Philippines.I. What This Warranty Coversand For How Long:MOTOROLA warrants the MOTOROLAmanufactured iDEN Communication Productslisted below (“Product”) against defects in materialand workmanship under normal use and servicefor a period of time from the date of purchase asscheduled below:Rechargeable Batteries will be replaced during theapplicable warranty period if:a. the battery capacity falls below 80% of ratedcapacity, orb. the battery develops leakage.MOTOROLA, at its option, will at no charge eitherrepair the Product (with new or reconditionedparts), replace it (with a new or reconditionedProduct), or refund the purchase price of theProduct during the warranty period provided it isreturned in accordance with the terms of thiswarranty. Replaced parts or boards are warrantedfor the balance of the original applicable warrantyperiod. All replaced parts of Product shall becomethe property of MOTOROLA.This express limited warranty is extended byMOTOROLA to the original end user purchaseronly and is not assignable or transferable to anyother party. This is the complete warranty for theProduct manufactured by MOTOROLA.MOTOROLA assumes no obligations or liability foradditions or modifications to this warranty unlessmadeinwritingandsignedbyanofficerofMOTOROLA. Unless made in a separateagreement between MOTOROLA and the originalend user purchaser, MOTOROLA does not warrantthe installation, maintenance or service of theProduct.iDEN Subscriber Digital Mobile andPortable UnitsOne (1) YearProduct Accessories(manufactured by or under licensefrom MOTOROLA)One (1) YearBatteries One (1) Year
126Limited Warranty Motorola Communication Products (International)MOTOROLA cannot be responsible in any way forany ancillary equipment not furnished byMOTOROLAwhichisattachedtoorusedinconnection with the Product, or for operation of theProduct with any ancillary equipment, and all suchequipment if expressly excluded from thiswarranty. Because each system which may usethe Product is unique, MOTOROLA disclaimsliability for range, coverage, or operation of thesystem as a whole, or any portion of the system notproduced by MOTOROLA, under this warranty.II. General Provisions:This warranty sets forth the full extent ofMOTOROLA’S responsibilities regarding theProduct, Repair, replacement or refund of thepurchase price, at MOTOROLA’S options, is theexclusive remedy. THIS WARRANTY IS GIVENIN LIEU OF ALL OTHER EXPRESSWARRANTIES. IMPLIED WARRANTIES,INLCUDING WITHOUT LIMITATION, IMPLIEDWARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE, ARELIMITED TO THE DURATION OF THIS LIMITEDWARRANTY TO THE FULL EXTENT SUCH MAYBE DISCLAIMED BY LAW. IN NO EVENT SHALLMOTOROLA BE LIABLE FOR DAMAGES INEXCESS OF THE PURCHASE PRICE OF THEPRODUCT, FOR ANY LOSS OF USE, LOSS OFTIME, INCONVENIENCE, COMMERCIAL LOSS,LOST PROFITS OR SAVINGS OR OTHERINCIDENTAL, SPECIAL OR CONSEQUENTIALDAMAGES ARISING OUT OF THE USE ORINABILITY TO USE SUCH PRODUCT, TO THEFULL EXTENT SUCH MAY BE DISCLAIMED BYLAW.III. How to Get WarrantyService:You must provide proof of purchase (bearing thedate of purchase and Product item serial number)in order to receive warranty service and, also,deliver or send the Product item, transportationand insurance prepaid, to an authorized warrantyservice location. Warranty service will be providedby MOTOROLA through one of its authorizedwarranty service locations. If you first contact thecompany which sold you the Product (e.g., dealeror communication service provider), it can facilitateyour obtaining warranty service.IV. What This Warranty DoesNot Cover:a. Defects or damage resulting from use of theProduct in other than its normal and customarymanner.
127b. Defects or damage from misuse, accident,water, or neglect.c. Defects or damage from improper testing,operation, maintenance, installation, alteration,modification, or adjustment.d. Breakage or damage to antennas unlesscaused directly by defects in materialworkmanship.e. A Product subjected to unauthorized Productmodifications, disassemblies or repairs(including, without limitation, the audition to theProduct of non-MOTOROLA suppliedequipment).f. Product which has had the serial numberremoved or made illegible.g. Rechargeable batteries if:1.Any of the seals on the battery enclosure ofcells are broken or show evidence oftampering.2.The damage or defect is caused bycharging or using the battery in equipmentor service other than the Product for which itis specified.h. Freight costs to the repair depot.i. A Product which, due to illegal or unauthorizedalteration of the software/firmware in theProduct, does not function in accordance withMOTOROLA’S published specifications or thelocal type acceptance labeling in effect for theProduct at the time the Product was initiallydistributed from MOTOROLA.j. Scratches or other cosmetic damage toProduct surfaces that does not effect theoperation of the Product.k. Normal and customary wear and tear.l. Exclusion for defects or damage arising fromuse of the products in connection withnon-MOTOROLA equipment.VI. Patent and SoftwareProvisions:MOTOROLA will defend, at its own expense, anysuit brought against the end user purchaser to theextent that it is based on a claim that the Product orparts infringe a patent, and Motorola will pay thosecosts and damages finally awarded against theend user purchaser in any such suit which areattributable to any such claim, but such defenseand payments are conditioned on the following:a. That MOTOROLA will be notified promptly inwriting by such purchaser of any notice of suchclaim;b. That MOTOROLA will have sole control of thedefense of such suit and all negotiations for its
128Limited Warranty Motorola Communication Products (International)settlement or compromise; andc. Should the Product or parts become, or inMOTOROLA’S opinion be likely to become, thesubject of a claim of infringement of a patent,that such purchaser will permit MOTOROLA, atits option and expense, either to procure forsuch purchaser the right to continue using theProduct or parts or to replace or modify thesame so that it becomes non-infringing or togrant such purchaser a credit for the Product orparts as depreciated and accept its return. Thedepreciation will be an equal amount per yearover the lifetime of the Product or parts asestablished by MOTOROLA.MOTOROLA will have no liability with respect toany claim of patent infringement which is basedupon the combination of the Product or partsfurnished hereunder with software, apparatus ordevices not furnished by MOTOROLA, nor willMOTOROLA have any liability for the use ofancillary equipment or software not furnished byMOTOROLAwhichisattachedtoorsuedinconnection with the Product or any parts thereof. Inno event shall MOTOROLA be liable for anyincidental, special or consequential damagesarising from any claim of patent infringement oralleged infringement.Laws in the United States and other countriespreserve for MOTOROLA certain exclusive rightsfor copyrighted MOTOROLA software, such as theexclusive rights to reproduce in copies anddistribute copies of such MOTOROLA software.MOTOROLA software may be used in only theProduct in which the software was originallyembodied and such software in such Product maynot be replaced, copied, distributed, modified inany way, or used to produce any derivative thereof.No other use including, without limitation,alteration, modification, reproduction, distribution,or reverse engineering of such MOTOROLAsoftware or exercise or rights in such MOTOROLAsoftware is permitted. No license is granted byimplication, estoppel or otherwise underMOTOROLA patent rights or copyrights.
129Patent and TrademarkInformationMOTOROLA, the Stylized M Logo and all othertrademarks indicated as such herein aretrademarks of Motorola, Inc. ® Reg. U.S. Pat. &Tm. Off. © 2004 Motorola, Inc. All rights reserved.Microsoft and Microsoft Internet Explorer areregistered trademarks of Microsoft Corporation.T9 is a trademark owned by TegicCommunications.T9®Text Input Patent and Trademark InformationThis product is covered by U.S. Pat. 5,818,437,U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and otherpatents pending.Java and all other Java-based marks aretrademarks or registered trademarks of SunMicrosystems, Inc. in the U.S. and other countries.All other product names or services mentioned inthis manual are the property of their respectivetrademark owners.Software Copyright NoticeThe Motorola products described in this manualmay include copyrighted Motorola and third partysoftware stored in semiconductor memories orother media. Laws in the United States and othercountries preserve for Motorola and third partysoftware providers certain exclusive rights forcopyrighted software, such as the exclusive rightsto distribute or reproduce the copyrighted software.Accordingly, any copyrighted software contained inthe Motorola products may not be modified,reverse-engineered, distributed, or reproduced inany manner to the extent allowed by law.Furthermore, the purchase of the Motorolaproducts shall not be deemed to grant eitherdirectly or by implication, estoppel, or otherwise,any license under the copyrights, patents, or patentapplications of Motorola or any third party softwareprovider, except for the normal, non-exclusive,royalty-free license to use that arises by operationof law in the sale of a product.
130IndexIndexNumerics2-way radio 98seealsoPrivatecalls,groupcalls, SDG calls, and callalerts3-way calling 42AAccessories 15safety 119Alpha mode 61Antenna 15BBacklight 97Batterycare 5charging 4door 3inserting 3safety 118Baud rate 101CCall alerts 28deleting 29queue 28receiving 28responding 28, 29sending 28sorting 29viewing 29Call filtering 105Call forwarding 38all calls 38missed calls 39off 39Call Timers 45Call Waiting 41off 41Calls3-way 42answering automatically 98answering with any key 17,98emergency 21ending 17entering number 17from Contacts 18from Datebook 19from memo 57from Recent calls 18group, see Group callsinternational 43making 16on hold 42phone calls 16Private calls 16, 20, 98receiving 17redialing 19, 98remote PTT 109SDG, see SDG CallsSpeed Dial 19TTY, see TTY callsTurbo Dial 19voice name 19Circuit data 46Clock 97Contacts 18, 32capacity 36creating entries 34
131deleting 36icons 32iDEN Phonebook Manager37international numbers 37searching 33showing all entries 34showing only Private IDs 33SIM card 32storing from idle screen 35storing from Memo 57storing from recent calls 30type 30, 32viewing 33voice name 35with non-i830 phones 37DDatebook 19profiles 75Direct Launch 26Displaybacklight 97contrast 96, 98options 8screen 8Drafts 70see also MOSMS messages,draftsEEmail 33, 34, 46Emergency calls 21Emergency Group calls 50ending 51making 51receiving 51End key 2FFaxesreceiving 46sending 46Flip action 16, 17, 44GGPS Enabled 84almanac data 89best results 87emergency calls 21, 85map software 91privacy options 89security 90viewing location 86GPS PIN 100GPS, see GPS EnabledGroup calls 49, 98seealsoEmergencyGroupcallsmaking 50off 50receiving 50HHandset, see phoneHeadset 109IIconsContacts 32Recent calls 30SDG calls 55status 10text entry 61iDEN Phonebook Manager 37Idle screen 8creating MOSMS messages
132Index69storingtoContacts35International numbers 43calling 43storing 37JJava applicationsdeleting 80memory 81, 94KKeypad 2locking 100LLanguage 98Lists, see menusMMemo 57calling from 57creating 57editing 57storingtoContacts57viewing 57MemoryJava applications 81, 94MOSMS messages 71ring tones 60voice records 94Menu key 2, 9Menus 8context-sensitive 2, 9main menu 9SDG list 52Message center 64, 66seealsomessagesMOSMS messages 68Message notifications 64setting options 64Messages 64seealsovoicemail,MOSMSmessages, and SMSmessagesreceiving 64MOSMS messages 67creating 68deleting 70, 71drafts 70memory 71message center 68quick notes 69receiving 67sending 68sent messages 70setting up 67sorting 71MOTOtalkchannels 23codes 23emergency 26private MOTOtalk calls 25setup options 26talk range 23using 22Mute 21NNavigation key 2Numeric mode 63OOver-the-air programming 6PPacket data 46Passwords 100
133Patent information 129Pausesdialing 43storing 36Phone 1, 8active line 98flip action 16, 17, 44locking 100modem 46off 6on 6only 101setting up 2Profiles 102call filtering 105changing settings 102creating 104Datebook 75deleting 104editing 104switching 102temporary 103viewing 102Programming, over-the-air 6PTTOne Touch 20One Touch, setting 43PUK code 13QQuick notes 69see also MOSMS messages,Quick notesRRadio frequency 113Recent calls 18, 30creating MOSMS messages69deleting 31display time 101icons 30storingtoContacts30viewing 30Redialing 19, 98Ring tones 32, 58deleting 60downloading 59memory 60off 58setting 58settinginContacts34, 59vibrate 58viewing assigned 59Ringer 95seealsoRingtonesoff 95SSafety 113accessory 119battery 118driving 136electromagnetic interference116medical devices 116radio frequency 113SDG Calls 52icons 55lists, adding numbers 52lists, creating 52lists, deleting 53lists, removing members 53lists, sending 55lists, storing faster 54
134Indexmaking 54receiving 55settings 98starting 54status icons 10Security 100Selective Dynamic Group Calls,see SDG Calls 52Service provider 15Service, activating 6Settings 97resetting 101Shortcutscreating 107deleting 108editing 108using 107SIM card 11, 12, 14Contacts 32inserting 14removing 15with non-i830 phones 37SIM PIN 12, 100changing 12default 12entering 12requirement 13unblocking 13SMS messages 64, 67also see MOSMS messages67Speakerphone 20Speed Dial 19, 33, 35State Tone 27Status messages 110Symbols mode 63TT9 Text Input, see text entryTalkgroups 49, 50, 98joining 50Text display area 8Text entry 61Alpha mode 61database 61, 62icons 61mode 61Numeric mode 63Symbols mode 63Word mode 61Trademark information 129TTY calls 47baud rate 48making 47mode 47on 47Turbo Dial 19VVoice mail 64, 66receiving 66sending calls to 17, 66setting up 39, 66Voice name 19, 33creating 35Voice records 93creating 93deleting 94labelling 93locking 94memory 94playing 93Volume, setting 95, 99
135WWaitsdialing 43storing 36Warranty 125Word mode 61
136Driving Safety TipsDriving Safety Tips“Safety is your most important call!”Your Motorola wireless telephone gives you thepowerful ability to communicate by voice — almostanywhere, anytime, wherever wireless phoneservice is available and safe conditions allow. Butan important responsibility accompanies thatbenefits of wireless phones, one that every usermust uphold.When driving a car, driving is your firstresponsibility. If you find it necessary to use yourwireless phone while behind the wheel of a car,practice good common sense and remember thefollowing tips:•Get to know your Motorola wireless phone andits features such as speed dial and redial. Ifavailable, these features help you to place yourcall without taking your attention off the road.•When available, use a hands-free device. Ifpossible, add an additional layer of convenienceto your wireless phone with one of the manyMotorola Original hands-free accessoriesavailable today.•Position your wireless phone within easy reach.Be able to access your wireless phone withoutremoving your eyes from the road. If you receivean incoming call at an inconvenient time, ifpossible, let your voice mail answer it for you.•Let the person you are speaking with know youare driving; if necessary, suspend the call inheavy traffic or hazardous weather conditions.Rain, sleet, snow, ice, and even heavy traffic canbe hazardous.•If you receive an incoming call at aninconvenient time do not take notes or look upphone numbers while driving. Jotting down a “todo” list or going through your address booktakes attention away from your primaryresponsibility — driving safely.•Dial sensibly and assess the traffic; if possible,place calls when you are not moving or beforepullingintotraffic.Trytoplancallswhenyourcarwill be stationary. If you need to make a callwhile moving, dial only a few numbers, checkthe road and your mirrors, then continue.•Do not engage in stressful or emotionalconversations that may be distracting. Makepeople you are talking with aware you aredriving and suspend conversations which havethe potential to divert your attention away fromthe road.
137•Your phone can perform many other functionsbesides allowing you to make and receive calls.Do not let these features distract you fromdriving. Use them only when it is safe to do so.•Use your wireless phone to call for help. Dial9-1-1 or other local emergency number in thecase of fire, traffic accident or medicalemergencies.•Use your wireless phone to help others inemergencies. If you see an auto accident, crimein progress or other serious emergency wherelives are in danger, call 9-1-1 or other localemergency number, as you would want others todo for you.•Call roadside assistance or a specialnon-emergency wireless assistance numberwhen necessary. If you see a broken-downvehicle posing no serious hazard, a brokentraffic signal, a minor traffic accident where noone appears injured, or a vehicle you know to bestolen, call roadside assistance or other specialnon-emergency wireless number.

Navigation menu