Motorola Solutions 89FT7004 Handheld Data Terminal with WAN modem User Manual FCC Certification Report for the

Motorola Solutions, Inc. Handheld Data Terminal with WAN modem FCC Certification Report for the

Contents

Exhibit 8 EME User Card and User Manual

Applicant: Motorola, Inc. FCC ID: AZ489FT7004Exhibit 8Exhibit VIIIUser Information and User Manual1) User Card/Booklet - 2 pages, contains important information for safe usage and RF energyawareness and control information for compliance with RF energyexposure limits2) User Service Manual HDT 600 Data Terminal- 29 PDF pages total, 22 numbered pagesPlease find the information required by Part 15.19, 15.21 & 15.105 inOwners Manual on page 7 of this PDF file, or click tab to FCCINTERFERENCE WARNING.Note: Items 1 & 2 above follow this cover page
68P02963C77-A Please retain for future useBEFORE USING THIS RADIO TERMINAL, READ THIS BOOKLET WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STAN-DARDS. The information provided in this document supersedes information contained in user guides published prior to February 2002. For radio terminals that have been approved as intrinsically safe, read the instruc-tions and information on intrinsic safety in this booklet.Compliance with RF Energy Exposure StandardsNotice: This radio terminal is intended for use in occupational/controlled applica-tions, where users have been made aware of the potential for exposure and can ex-ercise control over their exposure. This radio terminal device is NOT authorized for general population, consumer or similar use. Federal Communication Commission Regulations: The FCC established limits for safe exposure to radio frequency (RF) emissions from portable two-way radios. The FCC requires manufacturers to demonstrate compliance with RF exposure limits before portable two-way radios can be market-ed in the U.S. When two-way radios are approved for occupational /controlled envi-ronment exposure limits, the FCC requires users to be fully aware of and exercise control over their exposure. Awareness and control of RF exposure can be accom-plished by the use of labels, or by education or training through appropriate means, such as information and instructions in user manuals or safety booklets. Your Mo-torola two-way radio terminal has a RF exposure information label in the battery compartment. This user safety booklet includes useful information about RF expo-sure and helpful instructions on how to control your RF exposures. Your Motorola two-way radio terminal is designed and tested to comply with a num-ber of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This radio terminal complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/con-trolled RF exposure environment at usage factors of up to 50% transmit -50% re-ceive. In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio terminal radiates measurable RF energy only while it is trans-mitting, not when it is receiving or in standby mode. Note: that the approved batter-ies, supplied with this radio terminal are rated for a 5-5-90 duty cycle (5% transmit-5% receive - 90% standby), even though this radio terminal complies with the FCC occupational exposure limits at usage factors of up to 50% transmit. Your Motorola two-way radio terminal complies with the following RF energy exposure standards and guidelines:•United States Federal Communications Commission, Code of Federal Regula-tions; 47CFR part 2 sub-part J•American National Standards Institute (ANSI) / Institute of Electrical and Elec-tronic Engineers (IEEE) C95. 1-1992•Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition•International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998•Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999•Australian Communications Authority Radio communications (Electromagnetic Radiation - Human Exposure) Standard 2001. •ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) "addi-tional requirements for SMR, cellular and PCS product certification."Compliance and Control Guidelines and Operating Instructions for portable two-way radio terminals To control your exposure and ensure compliance with the occupational /controlled environment exposure limits always adhere to the following Procedures.•If you are not using a body-worn accessory and are not using the radio termi-nal in the intended use position in front of the face, then ensure the antenna and the radio terminal are kept 2.5 cm (one inch) from the body when transmit-ting. Keeping the radio terminal at a proper distance is important because of RF exposures decrease with distance from the antenna. •Use only Motorola approved supplied or replacement batteries, and accesso-HANDHELD PORTABLETERMINALHDT600 ab
ries. Use of non-Motorola-approved, batteries and accessories may exceed FCC RF exposure guidelines. For additional information on RF exposure awareness information, visit the following Motorola website: www.mot.com/rfhealth.Electromagnetic Interference/CompatibilityNote:Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnet-ic compatibility.FacilitiesTo avoid electromagnetic interference and/or compatibility conflicts, turn off your ra-dio terminal in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your radio terminal when on board an aircraft. Any use of a radio terminal must be in accordance with applicable regulations per airline crew instructions.Medical DevicesPacemakersThe Advanced Medical Technology Association (AdvaMed) recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a hand-held wireless radio terminal and a pacemaker. These recommendations are consis-tent with those of the U.S. Food and Drug Administration.Persons with pacemakers should:•ALWAYS keep the radio terminal more than 6 inches (15 centimeters) from their pacemaker when the radio terminal is turned ON.•Do not carry the radio terminal in the breast pocket.•Turn the radio terminal OFF immediately if you have any reason to suspect that interference is taking place.Hearing AidsSome digital wireless radio terminals may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer of your de-vice to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.Operational WarningsFor Vehicles With an Air BagDo not place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a por-table radio terminal is placed in the air bag deployment area and the air bag inflates, the radio terminal may be propelled with great force and cause serious injury to occupants of the vehicle.Potentially Explosive AtmospheresTurn off your radio terminal prior to entering any area with a poten-tially explosive atmosphere, unless it is a radio terminal type espe-cially qualified for use in such areas as "Intrinsically Safe" (for example, Factory Mutual, CSA, UL, or CENELEC). Do not re-move, install, or charge batteries in such areas. Sparks in a poten-tially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust or metal powders. Areas with potentially explosive atmospheres are often but not always posted.Blasting Caps and Blasting AreasTo avoid possible interference with blasting operations, turn off your radio terminal when you are near electrical blasting caps, in a blasting area, or in areas posted: "Turn off two-way radio termi-nal." Obey all signs and instructions.
Owner’s ManualHDT 600Portable Draft Feb 18 03 Data Terminal68P02966C70-O68P02966C70-O@6802966C70@a
Commercial, Government and Industrial Solutions Sector1301 E. Algonquin Road, Schaumburg, IL 6019668P02966C70-OFebruary, 2003© Motorola Inc., 2003ContentsCOMPUTER SOFTWARE COPYRIGHTS iiFCC INTERFERENCE WARNING vWhat is the HDT 600 Terminal 1HDT 600 Parts 3Unpacking 4HDT 600 Cradle Connections 5Installing the Battery 6Removing the Battery 6First Time Battery Charge 7Charging the Battery 8 Battery Maintenance 9Turning on the HDT 600 10Suspend Mode 10Turning off the HDT 600 10Using the HDT 600 11Using the Stylus Pen 11Scanning With the HDT 600 12Resetting the HDT 600 13Cradle Installation 14Maintaining the HDT 600 16Accessories 17What to Do If 18Battery Warnings and Disposal 20
iiCOMPUTER SOFTWARE COPYRIGHTSThe Motorola products described in this instruction manual may include copyrighted Motorola computerprograms stored in semiconductor memories or other media. Laws in the United States and other countriespreserve for Motorola certain exclusive rights for copyrighted computer programs, including the exclu-sive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copy-righted Motorola computer programs contained In the Motorola products described in this instructionmanual may not be copied or reproduced in any manner without the express written permission of Motor-ola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or byimplication, estoppel. or otherwise. any license under the copyrights, patents or patent applications ofMotorola, except for the normal non-exclusive, royalty free license to use that arises by operation of lawin the sale of a product.EPS – 34440- BThis warranty applies within the fifty (50) United States, the District of Columbia and Canada.LIMITED WARRANTYMOTOROLA COMMUNICATION PRODUCTSIf the affected product is being purchased pursuant to a written Communications System Agreementsigned by Motorola, the warranty contained in that written agreement will apply. Otherwise, the follow-ing warranty applies.I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:Motorola Inc. or, if applicable, Motorola Canada Limited ("Motorola") warrants the Motorola manu-factured radio communications product, including original equipment crystal devices and channel ele-ments ("Product"), against material defects in material and workmanship under normal use and servicefor a period of One (1) Year from the date of shipment.Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts),replace it with the same or equivalent Product (using new or reconditioned Product), or refund the pur-chase price of the Product during the warranty period provided purchaser notifies Motorola accordingto the terms of this warranty. Repaired or replaced Product is warranted for the balance of the originalapplicable warranty period. All replaced parts of the Product shall become the property of Motorola.This express limited warranty is extended by Motorola to the original end user purchaser purchasingthe Product for purposes of leasing or for commercial, industrial, or governmental use only, and is notassignable or transferable to any other party. This is the complete warranty for the Product manufac-tured by Motorola. Motorola assumes no obligations or liability for additions or modifications to thiswarranty unless made in writing and signed by an officer of Motorola. Unless made in a separate writ-ten agreement between Motorola and the original end user purchaser, Motorola does not warrant theinstallation, maintenance or service of the Product.Motorola cannot be responsible in any way for any ancillary equipment not furnished by Motorolawhich is attached to or used in connection with the Product, or for operation of the Product with anyancillary equipment, and all such equipment is expressly excluded from this warranty. Because eachsystem which may use the Product is unique, Motorola disclaims liability for range, coverage, or oper-ation of the system as a whole under this warranty.
iiiII. GENERAL PROVISIONS:This warranty sets forth the full extent of Motorola’s responsibilities regarding the Product. Repair,replacement or refund of the purchase price, at Motorola’s option, is the exclusive remedy. THISWARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. MOTOROLA DIS-CLAIMS ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDINGTHE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGESIN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSSOF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OROTHER INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISINGOUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCHMAY BE DISCLAIMED BY LAW.III.HOW TO GET WARRANTY SERVICE:Purchaser must notify Motorola’s representative or call Motorola’s Customer Response Center at 1-800-247-2346 within the applicable warranty period for information regarding warranty service.IV. WHAT THIS WARRANTY DOES NOT COVER:A) Defects or damage resulting from use of the Product in other than its normal and customary manner.B) Defects or damage from misuse, accident, water, or neglect.C) Defects or damage from improper testing, operation, maintenance, installation, alteration, modifica-tion, or adjustment.D) A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, with-out limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affectperformance of the Product or interfere with Motorola’s normal warranty inspection and testing of theProduct to verify any warranty claim.E) Product which has had the serial number removed or made illegible.F) Batteries (they carry their own separate limited warranty).G) Freight costs to the repair depot.H) A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product,does not function in accordance with Motorola’s published specifications or with the FCC typeacceptance labeling in effect for the Product at the time the Product was initially distributed fromMotorola.I) Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Prod-uct.J) That the software in the Product will meet the purchaser’s requirements or that the operation of thesoftware will be uninterrupted or error-free.K) Normal and customary wear and tear.L) Non-Motorola manufactured equipment unless bearing a Motorola Part Number in the form of analpha numeric number (i.e., TDE6030B).
ivV. GOVERNING LAWIn the case of a Product sold in the United States and Canada, this Warranty is governed by the laws ofthe State of Illinois and the Province of Ontario, respectively.VI.PATENT AND SOFTWARE PROVISIONS:Motorola will defend, at its own expense, any suit brought against the end user purchaser to the extentthat it is based on a claim that the Product or its parts infringe a United States patent, and Motorola willpay those costs and damages finally awarded against the end user purchaser in any such suit which areattributable to any such claim, but such defense and payments are conditioned on the following:A) that Motorola will be notified promptly in writing by such purchaser of any notice of such claim;B) that Motorola will have sole control of the defense of such suit and all negotiations for its settlement orcompromise; andC) should the Product or its parts become, or in Motorola's opinion be likely to become, the subject of aclaim of infringement of a United States patent, that such purchaser will permit Motorola, at its optionand expense, either to procure for such purchaser the right to continue using the Product or its parts orto replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit forthe Product or its parts as depreciated and accept its return. The depreciation will be an equal amountper year over the lifetime of the Product or its parts as established by Motorola.Motorola will have no liability with respect to any claim of patent infringement which is based uponthe combination of the Product or its parts furnished hereunder with software, apparatus or devices notfurnished by Motorola, nor will Motorola have any liability for the use of ancillary equipment or soft-ware not furnished by Motorola which is attached to or used in connection with the Product. The fore-going states the entire liability of Motorola with respect to infringement of patents by the Product orany its parts thereof.Laws in the United States and other countries preserve for Motorola certain exclusive rights for copy-righted Motorola software such as the exclusive rights to reproduce in copies and distribute copies ofsuch Motorola software. Motorola software may be used in only the Product in which the softwarewas originally embodied and such software in such Product may not be replaced, copied, distributed,modified in any way, or used to produce any derivative thereof. No other use including, without limi-tation, alteration, modification, reproduction, distribution, or reverse engineering of such Motorolasoftware or exercise of rights in such Motorola software is permitted. No license is granted by impli-cation, estoppel or otherwise under Motorola patent rights or copyrights.EPS – 48759 – O
vFCC INTERFERENCE WARNINGThe FCC requires that manuals pertaining to Class A and Class B computing devices must contain warn-ings about possible interference with local residential radio and TV reception. This warning reads as fol-lows:NOTE: This equipment has been tested and found to comply with limits for a Class B digital device, pur-suant to Part90 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference when the equipment is operated in a commercial or residential environment. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accor-dance with the instruction manual, may cause harmful interference to radio communications. This device complies with Part 90 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesiredoperation.Caution: Changes or modifications made in the radio terminal, not expressly approved by Motorola, willvoid the user's authority to operate the equipment.For detailed product safety and RF exposure for portable terminals with two-way radios, refer to Electro-magnetic Emission (EME) safety leaflet, Motorola publication number 68P02963C77.TrademarksMotorola and the Motorola logo are registered trademarks of Motorola, Inc. FlashFile is a trademark of Intel Corporation.Microsoft, Windows, and Windows CE are registered trademarks of Microsoft Corporation.
1What is the HDT 600 TerminalThe HDT 600 is a portable terminal designed for field applications where fast data acquisition is required. Its ergonomic design is easy to hold and carry. Its unique shape fits the hand, and the back strap provides extra grip. The Windows CE operating system with touch screen and soft-keys provides easy access to various applications. The HDT 600 is equipped with a 3.6 inch color LCD screen with LED front-light, viewable in all light conditions, including direct sunlight. The touch sensitive screen enables signature capture as well as easy selection from an on-screen menu. A LASER beam barcode reader (optional) enables one-hand bar-code reading on both vertical and horizontal labels. Activation of the barcode is by one of four direct access dedicated trigger keys for right or left handed users. The unit operates in all weather conditions and is protected against hostile environment factors, such as impact, rain, vibrations and ESD. An RS232 port serves for uploading and downloading data between the HDT 600 and a PC via the HDT 600 Cradle. Connec-tions for external power supply are also provided. The 1400mA Lithium-Ion battery pack provides at least one shift of normal oper-ation before charging is needed. The HDT 600 uses the following methods of communication:• Short distance: Each HDT 600 contains a Bluetooth radio mod-ule for short distance communication with peripheral devices such as printers etc.• Local Area Network (LAN) communication: An optional Spread Spectrum 2.4GHz radio module provides coverage within a local distribution hub.
2• Wide Area Network (WAN) communication:1. An optional GPRS radio module provides coverage within cellular infrastructure. 2. An optional DataTAC radio module provides coverage within DataTAC network infrastructure.3. An optional iDEN radio module provides coverage within iDEN network infrastructure.It is also possible to use GPRS and WLAN communication by installing both radios within the HDT 600. In such case the HDT 600 software switches between radios when moving from one cov-erage area to another.
3HDT 600 Parts LED Indicator BuzzerTouch Sensitive Screen Function Soft Keys Battery Charge ContactsBarcode Scanner Power Button (On/Off/Suspend)Barcode Scanner Triggers Battery LockLASER WindowTerminal Release Button Stylus Pen Stylus Pen Silo & Communication Front View Back View Terminal Release Button Battery Hand Strap HDT 600 CradleRed LED indicating HDT 600 locked into Cradle
4UnpackingThe HDT 600 Data Terminal and HDT 600 Cradle are shipped in separate packages. The HDT 600 Data Terminal package includes the following items:• One HDT 600 Data Terminal unit• One 7.2V 1400mAH Li-ion battery pack• One Stylus pen• This Owner’s ManualThe HDT 600 Cradle package includes the following items:• HDT 600 Cradle• 12/24 VDC vehicle power cable with 3 Amps fuse or Cigarette lighter adapter• This Owner’s ManualIf ordered, you may also receive optional accessories such as: Cig-arette Lighter Cable for Vehicle Cradle or Desktop Adaptor for Vehicle Cradle or Wall Mounting Kit.Carefully unpack each item from the shipping carton. Check all items for shipping damage, and check that you have received all items ordered. If there is damage or missing items, retain the ship-ping carton for inspection.The battery is shipped from factory uncharged and not installed. Charge the battery before using the HDT 600 for the first time. See “First Time Battery Charge” on page 7.The HDT 600 is shipped with a plastic film protecting the screen. Before using, remove the film and use a soft cloth to buff the dis-play. This ensures smooth gliding of the Stylus pen over the sur-face.
5HDT 600 Cradle ConnectionsRS232 Cable to DesktopCigarette Lighter Cable (To 12/24VDC 3 Amps fuse The HDT 600 terminal can communicate with a host PC directly through its communications port (COM Port) using an RS232 serial cable 3 Amps Fuse inside Important Note: This product should be installed according to local applicable laws and directives.PC COM PortPower Cable for vehicle power system)Vehicle Cradlefor HDT 600 CradleAdapter
6Installing the BatteryThe battery is shipped from the factory uncharged and not installed. Charge the battery before using the HDT 600 for the first time.1. Before installing the battery, release the terminal hand strap, as shown below.2. Verify that the battery lock is in Unlock position.3. To install the battery, position the battery in the right-hand side of the battery compartment and lower it downward to its place.4. Use a coin to lock the battery by turning the battery lock clock-wise to the Lock position. Note that the battery is locked only when the two dots align (see figure below). Removing the BatteryImportant Note: The HDT 600 enables you to replace batter-ies without losing information stored in its memory. To avoid los-ing information stored in the memory, charged battery must be installed within 2 minutes after removing empty battery.Battery LockPower Button Hand StrapLockUnlock
71. Turn the HDT 600 off by holding the Power button pressed for at least two seconds.2. Release the terminal hand strap as shown in the figure above.3. Use a coin to unlock the battery by turning the battery lock counter-clockwise.4. To remove the battery, lift the left-hand side of the battery and pull it out.First Time Battery ChargeThe battery is charged when installed inside the HDT 600. Charge your new battery for at least six continuous hours before using it or until the LED indicator of the HDT 600 turns from red to green. The first time charge is referred to as initializing and will ensure maximum battery start capacity. The HDT 600 Cradle charges your battery effectively when it is at room temperature (approx. 20° C). Battery charging temperature range is 0°C to 45°C.
8Charging the BatteryThe battery remaining capacity indication may show by the LED indicator of your HDT 600 (see figure below). Note that the HDT 600 can either be in On, Off or Suspend mode, while charging. To avoid damage and provide optimal performance of the HDT 600 and Cradle, use only the Power Supply provided by your company.To charge the battery, perform the following steps:1. Connect the power cable to the socket at the base of the Cradle.2. Slide the HDT 600 into the Cradle and lock the HDT 600 inside by pushing it towards the back of the Cradle.Press to unlock Red LED indicating HDT 600 lockedPush back to lock HDT 600 into Cradle into CradlePress to unlockRed: charging Green: battery full Red blinks: charging problem LED indicator HDT 600 HDT 600 !Caution
9When installed in a vehicle, the HDT 600 must be locked into the Cradle. If not locked, the HDT 600 may be propelled with great force and may cause serious injury to occupants of the vehicle. Important Note: The HDT 600 will not charge if not locked into the Cradle. Once the HDT 600 is locked, the Cradle red LED will turn on, indi-cating lock status.3. To remove the HDT 600 from the Cradle, press one or two unlock buttons until the HDT 600 pops out a bit, and remove the HDT 600 from the Cradle. Battery MaintenanceThe performance of the rechargeable battery delivered with your HDT 600 depends on the way the battery is treated. Therefore, to comply with the Motorola warranty for batteries and to assure high performance and a long life for your Motorola rechargeable battery, please read and follow the maintenance rules stated below.Battery StorageDo not store your battery where the temperatures will exceed 65°C or fall below -20°C.New Lithium-Ion batteries (i.e. batteries that have never been charged before) may be stored for up to 3 months in well-venti-lated, cool and dry areas without significant loss in lifespan.Batteries which have already been charged and then stored for more than 2 months should be recharged before use.Extending Battery LifeA battery is an expendable part and may need replacing during the life of the HDT 600. To ensure maximum service life of your HDT !Warning
10600, always replace the battery with a genuine Motorola replace-ment.Your Cradle will charge your battery effectively when it is at room temperature (approx. 20° C). Battery charging temperature range is 0°C to 45°C.Turning on the HDT 600 Press the Power button to start the HDT 600. The HDT 600 also powers on immediately when the battery is inserted. As the HDT 600 initializes its unique flash file system, the Motor-ola logo displays for about one minute. Note that this screen also appears every time you perform a restart.Suspend ModeThe Suspend mode is used for saving the HDT 600 battery power by turning off the display and computer sections of the HDT 600, while keeping the radio(s) powered on.When the HDT 600 is on, press the Power button to toggle between Suspend and Resume modes. During the Suspend mode, the dis-play turns off and the LED indicator blinks. When the HDT 600 resumes, it returns to the screen displayed prior to the Suspend mode. Use the Suspend mode as often as possible to save battery power.Turning off the HDT 600When the HDT 600 is on or in Suspend mode, hold the Power but-ton pressed for at least two seconds, to turn off the HDT 600.
11Using the HDT 600When using the HDT 600, the hand strap on the back of the unit provides stability. Insert your left or right hand under the strap while holding the stylus pen in the other hand.Using the Stylus PenThe Stylus pen selects items and enters information. Use the pen as you use your PC mouse.• To open and select screen items, tap on the item twice with the pen.• To drag text or image items, hold the pen on the item and drag across the screen. • To see a list of actions available for specific item, tap-and-hold the pen on an item. When the pop-up menu appears, tap the action you want to perform.
12Scanning With the HDT 600 The HDT 600 is equipped with four scan trigger buttons, designed for left-handed and right-handed users. The buttons are located on the left-hand and right-hand sides of the terminal and on the left-hand and right-hand sides of the upper front panel.The HDT 600 has an integrated scanner which gathers data by scanning barcodes. To scan barcodes with the HDT 600, aim the scanner at the barcode.Press one of the four scan trigger buttons. Ensure the red scan beam covers the entire barcode. The green scan LED lights and a beep sounds to indicate a successful decode.Scan Trigger Buttons45° Scan AngleScan Trigger ButtonsLASER LIGHT DO NOT STARE INTO BEAMCLASS 2 LASER PRODUCT LUMIERE LASER NE PAS REGARDER LE RAYON FIXEMENT PRODUIT LASER DE CLASSE 2
13Resetting the HDT 600You may need to reset your HDT 600; for example, you may reset due to communication cut-off with your desktop PC or radio network, or when the oper-ating system stops responding. When your HDT 600 stops responding, do the following actions:Warm BootImportant Note: When HDT 600 is warm booted, all informa-tion remains stored in memory.1. Simultaneously press soft keys 1, 2 and the Power but-ton for at least 5 seconds; the HDT 600 will function again. If your HDT 600 still does not respond perform:Cold ResetImportant Note: When HDT 600 is cold reset, all information stored in its memory will be lost.2. Simultaneously press soft keys 2, 3 and 4 to restart your HDT 600. The operation system will reboot for about a minute. 1234Power Button
14Cradle InstallationThe Cradle can be installed by using the four threaded holes on its back side (See figure in page 14). Use the holes to attach the Cradle to any surface, such as: vehicle dashboard, office wall or table. Planning is the key to fast, easy HDT 600 Cradle installation. Before a hole is drilled or a wire is run, inspect the vehicle and determine how and where you intend to mount the Cradle and accessories. Plan wire and cable runs to provide maximum protec-tion from pinching, crushing, and overheating.The installation planning should only be undertaken by persons who are competent and able to ensure that the complete installation fulfills its regulatory requirements, such as EMC (ElectroMagnetic Compatibility).Please note that it is the responsibility of the installing party to ensure that the inclusion of mount accessories and connections to the battery system is according to local standards and is not in vio-lation of applicable safety specifications. When routing the power cable to the Cradle, it is important to use as much cable as needed and cut off the remainder. Using the exact cable length ensures proper power supply to the Cradle. Make sure that the power cable has a 3 Amps fuse (See “HDT 600 Cradle Connections” on page 5). The power cable must originate after the vehicle current protection system. In order to prevent continuous consumption from the vehi-cle's battery, route the power cable after the ignition switch. Note that the input voltage to the Cradle may range from 10.6 to 32 VDC (Max peak current: 2 Amps). The Cradle output voltage is 12 VDC (Max continuous current: 1 Amp at -30 to +50°C, 0.5 Amp at 50 to 60°C).Classification level 5 for power supplies having output circuit that meet the requirements for SELV circuit.
15For continued protection against risk of fire, replace only with same type and rating of fuse. Back side of HDT 600 CradleThreaded holesOffice AdapterThreaded holes50 mm125 mmM4X10Dashboard MountingWall Mount Bracket for installationM4X10(Pedestal)
16Maintaining the HDT 600 In order to maintain your HDT 600 in good working order:• Do not scratch the screen. Use only Motorola supplied stylus pen with the touch-sensitive screen.• Never use a pen or pencil or any sharp object on the screen.• Although your HDT 600 is water and dust resistant, do not expose it to rain or moisture for long periods of time.• Protect your HDT 600 from temperature extremes. Do not leave the HDT 600 on the dashboard of a car on a hot day, and keep the HDT 600 away from hot places.• The touch-sensitive screen of your HDT 600 contains glass. Do not drop your HDT 600 or subject it to strong impact.• Treat your HDT 600 as you would a cellular phone or other small and sensitive electronic devices.• Do not store or use your HDT 600 in any location that is extremely dusty, damp or wet.• If the battery contacts, screen or surface of the HDT 600 becomes dirty, use a soft lint free cloth, moistened with diluted Isopropyl Alcohol (IPA) solution, for removing dirt. The IPA can be diluted with water up to 20%.
17AccessoriesMotorola recommends the use of the following accessories with your terminal. Please refer to your company for more information.Motorola is not responsible for the use of accessories not approved for this product.The following Motorola approved accessories are for use with your terminal. For information on the availability of these accessories, please call your company supplier.Table 1: AccessoriesMotorola Approved Accessory Part NumberHDT 600 F4415ASpare Battery FNN5105ASpare Stylus FLN9805ACigarette Lighter Cable for Vehicle Cradle FKN6009APower Cable for Vehicle FKN8044AWall Mounting Kit FLN9782AHDT 600 Cradle F4416ADesktop Adapter 110V VA00054AADesktop Adapter 220V VA00055AABelt Holster, Leather, HDT 600 FHN6394ACarrying Case, Leather, HDT 600 (shoulder strap, D-Ring belt loop)FHN6395ACarrying Case, Leather, HDT 600 (shoulder strap, fixed belt loop)FHN6396A
18What to Do If Table 2: TroubleshootingProblem Cause SolutionHDT 600 does not turn on.Battery not charged.Ensure proper battery instal-lation in HDT 600.Charge or replace the battery.HDT 600 in Sus-pend mode.Press the Power Button. HDT 600 red LED does not stop blink orbattery refuse to charge.HDT 600 is not locked in Cradle.Reinstall HDT 600 in Cradle. Lock the HDT 600 properly in Cradle (See that the HDT 600 and Cradle red LEDs are on) and charge for 6 hours.Battery tempera-ture is incorrectEnsure that the battery tem-perature range is -0 to 45° CBad battery. Replace battery.HDT 600 does not detect scan input.LASER beam does not cover the entire barcode symbol.Scan again and make sure that the entire barcode sym-bol is covered.Unreadable bar-code.Be sure the barcode symbol is not covered.
19HDT 600 stopped responding.Problem in HDT 600 operating sys-tem or communica-tion network.Simultaneously press soft keys 1, 2 and the Power but-ton for at least 5 seconds; the HDT 600 should function again.If still does not respond, simultaneously press soft keys 2, 3 and 4 to restart your HDT 600. The operation sys-tem will reboot for about a minute.Incomplete or no data trans-mission between HDT 600 and PC.HDT 600 is not locked in Cradle. Lock the HDT 600 properly in Cradle (See that the red LED is on).Cradle contacts are not clean.Clean contacts and remove dust and objects from within the Cradle.Bad RS232 cable. Replace the RS232 cable.Communication software was incor-rectly installed or configured.See your System Administra-tor.Table 2: TroubleshootingProblem Cause Solution
20Battery Warnings and DisposalHDT 600 On Board AircraftAlways remove the battery from the HDT 600 when shipped via air. Any use of the HDT 600 must be in accordance with applicable regulations per airline crew instructions.Battery Disposal Batteries must be recycled or disposed of properly in accordance with local requirements. Recycling facilities may not exist in all areas. Please contact your local environmental agency for more information regarding proper disposal.To Prevent Injury Or Burns• USE ONLY SPECIFIED BATTERIES AND CHARGERS.• DO NOT DISPOSE OF ANY BATTERIES IN FIRE, AS THEY MAY EXPLODE!• DO NOT PUNCTURE OR ALLOW METAL TO CONTACT THE BATTERY TERMINALS.• DO NOT DISPOSE OF IN WATER.• DO NOT DISASSEMBLE.• DO NOT STORE ABOVE 60C/140F
HOW TO REACH US:Commercial, Government and Industrial Solutions Sector1301 E. Algonquin Road, Schaumburg, IL 60196Visit our Web site atwww.motorola.comMOTOROLA and the Stylized M Logo are regis-tered in the U.S. Patent and Trademark Office. All other product or service names are the prop-erty of their respective owners.© Motorola, Inc. 2003.

Navigation menu