Motorola Solutions 89FT7005 Models: F4420A and F4425 User Manual User Card and Manual

Download:
Mirror Download [FCC.gov]
Document ID	303866
Application ID	XMZM+KN+UGwMO5+jWmsb4Q==
Document Description	User Card and Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	138.52kB (1731534 bits)
Date Submitted	2003-02-19 00:00:00
Date Available	2003-02-19 00:00:00
Creation Date	2002-12-16 10:54:50
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2003-02-18 12:09:36
Document Title	User Card and Manual

Applicant: Motorola, Inc.
FCC ID: AZ489FT7005
Exhibit VIII
User Information and User Manual
1) User Card/Booklet
- 2 pages, contains important information for safe usage and RF energy
awareness and control
2) User Manual PowerPad Portable Data Terminal
- 33 PDF pages total, 22 numbered pages
Please find the information required by Part 15.19, 15.21 & 15.105 on
pages iii & iv of the Owners Manual or pages 8 & 9 of this PDF file.
Note: Items 1 & 2 above follow this cover page
Exhibit 8
ab
2-WAY PORTABLE
RADIO TERMINAL
PowerPad
BEFORE USING THIS RADIO TERMINAL, READ THIS BOOKLET
WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR
SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL
INFORMATION FOR COMPLIANCE WITH RF ENERGY EXPOSURE
LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS.
The information provided in this document supersedes information contained in user
guides published prior to February 2003.
For radio terminals that have been approved as intrinsically safe, read the instructions and information on intrinsic safety in this booklet.
Caution: changes or modifications made in the radio terminal, not expressly approved by Motorola, will void the user's authority to operate the equipment.
This radio terminal is intended for use in a business environment.
Federal Communication Commission Regulations:
This user safety booklet includes useful information about RF
exposure and helpful instructions on how to control your RF exposures.
Your Motorola two-way radio terminal is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding
human exposure to radio frequency electromagnetic energy. This radio terminal
complies with the IEEE (FCC) and ICNIRP exposure limits for general population
exposure RF exposure environment. This radio terminal complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
In terms of measuring RF energy for compliance with the FCC exposure guidelines,
your radio terminal radiates measurable RF energy only while it is transmitting, not
when it is receiving or in standby mode.
Your Motorola two-way radio terminal complies with the following
RF energy exposure standards and guidelines:
• United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J
• American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992
• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
• International Commission on Non-Ionizing Radiation Protection (ICNIRP)
1998
• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to
Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz
to 300 GHz, 1999
• Australian Communications Authority Radio communications (Electromagnetic
Radiation - Human Exposure) Standard 2001.
• ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) "additional requirements for SMR, cellular and PCS product certification."
The FCC established limits for safe exposure to radio frequency (RF) emissions
from portable two-way radio terminals. The FCC requires manufacturers to demonstrate
compliance with RF exposure limits before portable two-way radio terminals can be marketed in the U.S.
Compliance and Control Guidelines and Operating Instructions for
portable two-way radio terminals
To control your exposure and ensure compliance with the applicable exposure
environment limits always adhere to the following Procedures.
• If you are not using a body-worn accessory and are not using the radio termi-
68P02966C56-B
Please retain for future use
nal in the intended use position, then ensure the antenna
and the radio terminal are kept 2.5 cm (one inch) from the body when in use.
Keeping the radio terminal at a proper distance is important because of
RF exposures decrease with distance from the antenna.
• Use only Motorola approved supplied or replacement batteries, and accessories. Use of non-Motorola-approved, batteries and accessories may exceed
FCC RF exposure guidelines.
For additional information on RF exposure awareness information, visit the following
Motorola website: www.mot.com/rfhealth.
Electromagnetic Interference/Compatibility
Note:Nearly every electronic device is susceptible to electromagnetic interference
(EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio terminal in any facility where posted notices instruct you to do so. Hospitals or
health care facilities may be using equipment that is sensitive to external RF energy.
Aircraft
When instructed to do so, turn off your radio terminal when on board an aircraft. Any
use of a radio terminal must be in accordance with applicable regulations per airline
crew instructions.
Medical Devices
Pacemakers
The Advanced Medical Technology Association (AdvaMed) recommends that a
minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless radio terminal and a pacemaker. These recommendations are consistent with those of the U.S. Food and Drug Administration.
Persons with pacemakers should:
• ALWAYS keep the radio terminal more than 6 inches (15 centimeters) from
their pacemaker when the radio terminal is turned ON.
• Do not carry the radio terminal in the breast pocket.
• Turn the radio terminal OFF immediately if you have any reason to suspect
that interference is taking place.
Hearing Aids
Some digital wireless radio terminals may interfere with some hearing aids. In the
event of such interference, you may want to consult your hearing aid manufacturer
to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may
be able to assist you in obtaining this information.
Operational Warnings
For Vehicles With an Air Bag
Do not place a portable radio in the area over an air bag or in the
air bag deployment area. Air bags inflate with great force. If a portable radio terminal is placed in the air bag deployment area and
the air bag inflates, the radio terminal may be propelled with great
force and cause serious injury to occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your radio terminal prior to entering any area with a potentially explosive atmosphere, unless it is a radio terminal type especially qualified for use in such areas as "Intrinsically Safe" (for
example, Factory Mutual, CSA, UL, or CENELEC). Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire
resulting in bodily injury or even death. The areas with potentially
explosive atmospheres referred to above include fueling areas
such as below decks on boats, fuel or chemical transfer or storage
facilities, areas where the air contains chemicals or particles, such
as grain, dust or metal powders. Areas with potentially explosive
atmospheres are often but not always posted.
Blasting Caps and Blasting Areas
To avoid possible interference with blasting operations, turn off
your radio terminal when you are near electrical blasting caps, in
a blasting area, or in areas posted: "Turn off two-way radio terminal." Obey all signs and instructions.
Owner’s Manual
Powerpad
Portable
Data
Terminal
DRAFT Jan 6 2003
6802968C60-O
6802968C60-O
@6802968C60@
COMPUTER SOFTWARE COPYRIGHTS
The Motorola products described in this instruction manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the
United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form
the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained In the Motorola products described in this instruction manual may not be
copied or reproduced in any manner without the express written permission of Motorola.
Furthermore, the purchase of Motorola products shall not be deemed to grant either directly
or by implication, estoppel. or otherwise. any license under the copyrights, patents or patent
applications of Motorola, except for the normal non-exclusive, royalty free license to use
that arises by operation of law in the sale of a product.
EPS – 34440- B
This warranty applies within the fifty (50) United States, the District of Columbia and Canada.
LIMITED WARRANTY
MOTOROLA COMMUNICATION PRODUCTS
If the affected product is being purchased pursuant to a written Communications System
Agreement signed by Motorola, the warranty contained in that written agreement will apply.
Otherwise, the following warranty applies.
I.WHAT THIS WARRANTY COVERS AND FOR HOW LONG:
Motorola Inc. or, if applicable, Motorola Canada Limited ("Motorola") warrants the Motorola manufactured radio communications product, including original equipment crystal
devices and channel elements ("Product"), against material defects in material and workmanship under normal use and service for a period of One (1) Year from the date of shipment.
Motorola, at its option, will at no charge either repair the Product (with new or reconditioned
parts), replace it with the same or equivalent Product (using new or reconditioned Product),
or refund the purchase price of the Product during the warranty period provided purchaser
notifies Motorola according to the terms of this warranty. Repaired or replaced Product is
warranted for the balance of the original applicable warranty period. All replaced parts of
the Product shall become the property of Motorola.
This express limited warranty is extended by Motorola to the original end user purchaser
purchasing the Product for purposes of leasing or for commercial, industrial, or governmental use only, and is not assignable or transferable to any other party. This is the complete
warranty for the Product manufactured by Motorola. Motorola assumes no obligations or
liability for additions or modifications to this warranty unless made in writing and signed by
an officer of Motorola. Unless made in a separate written agreement between Motorola and
the original end user purchaser, Motorola does not warrant the installation, maintenance or
service of the Product.
Motorola cannot be responsible in any way for any ancillary equipment not furnished by
Motorola which is attached to or used in connection with the Product, or for operation of the
Product with any ancillary equipment, and all such equipment is expressly excluded from
this warranty. Because each system which may use the Product is unique, Motorola dis-
claims liability for range, coverage, or operation of the system as a whole under this warranty.
II.GENERAL PROVISIONS:
This warranty sets forth the full extent of Motorola’s responsibilities regarding the Product.
Repair, replacement or refund of the purchase price, at Motorola’s option, is the exclusive
remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. MOTOROLA DISCLAIMS ALL OTHER WARRANTIES OR CONDITIONS,
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN
NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME,
INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER
INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT
SUCH MAY BE DISCLAIMED BY LAW.
III.HOW TO GET WARRANTY SERVICE:
Purchaser must notify Motorola’s representative or call Motorola’s Customer Response Center at 1-800-247-2346 within the applicable warranty period for information regarding warranty service.
IV.WHAT THIS WARRANTY DOES NOT COVER:
A)Defects or damage resulting from use of the Product in other than its normal and customary manner.
B)Defects or damage from misuse, accident, water, or neglect.
C)Defects or damage from improper testing, operation, maintenance, installation, alteration,
modification, or adjustment.
D)Breakage or damage to antennas unless caused directly by defects in material workmanship.
E)A Product subjected to unauthorized Product modifications, disassemblies or repairs
(including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motorola’s normal warranty inspection and testing of the Product to verify any warranty claim.
F)Product which has had the serial number removed or made illegible.
G)Batteries (they carry their own separate limited warranty).
H)Freight costs to the repair depot.
I)A Product which, due to illegal or unauthorized alteration of the software/firmware in the
Product, does not function in accordance with Motorola’s published specifications or with
the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from Motorola.
J)Scratches or other cosmetic damage to Product surfaces that does not affect the operation
of the Product.
K)That the software in the Product will meet the purchaser’s requirements or that the operation of the software will be uninterrupted or error-free.
L)Normal and customary wear and tear.
M)Non-Motorola manufactured equipment unless bearing a Motorola Part Number in the
form of an alpha numeric number (i.e., TDE6030B).
V.GOVERNING LAW
ii
In the case of a Product sold in the United States and Canada, this Warranty is governed by
the laws of the State of Illinois and the Province of Ontario, respectively.
VI.PATENT AND SOFTWARE PROVISIONS:
Motorola will defend, at its own expense, any suit brought against the end user purchaser to
the extent that it is based on a claim that the Product or its parts infringe a United States
patent, and Motorola will pay those costs and damages finally awarded against the end user
purchaser in any such suit which are attributable to any such claim, but such defense and
payments are conditioned on the following:
A)that Motorola will be notified promptly in writing by such purchaser of any notice of such
claim;
B)that Motorola will have sole control of the defense of such suit and all negotiations for its
settlement or compromise; and
C)should the Product or its parts become, or in Motorola's opinion be likely to become, the
subject of a claim of infringement of a United States patent, that such purchaser will permit
Motorola, at its option and expense, either to procure for such purchaser the right to continue
using the Product or its parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or its parts as depreciated and accept
its return. The depreciation will be an equal amount per year over the lifetime of the Product
or its parts as established by Motorola.
Motorola will have no liability with respect to any claim of patent infringement which is
based upon the combination of the Product or its parts furnished hereunder with software,
apparatus or devices not furnished by Motorola, nor will Motorola have any liability for the
use of ancillary equipment or software not furnished by Motorola which is attached to or
used in connection with the Product. The foregoing states the entire liability of Motorola
with respect to infringement of patents by the Product or any its parts thereof.
Laws in the United States and other countries preserve for Motorola certain exclusive rights
for copyrighted Motorola software such as the exclusive rights to reproduce in copies and
distribute copies of such Motorola software. Motorola software may be used in only the
Product in which the software was originally embodied and such software in such Product
may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such Motorola software or exercise of rights in
such Motorola software is permitted. No license is granted by implication, estoppel or otherwise under Motorola patent rights or copyrights.
EPS – 48759 – O
FCC INTERFERENCE WARNING
The FCC requires that manuals pertaining to Class A and Class B computing devices must
contain warnings about possible interference with local residential radio and TV reception.
This warning reads as follows:
NOTE: This equipment has been tested and found to comply with limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
iii
or residential environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
For detailed product safety and RF exposure refer to safety.eme leaflet, Motorola publication
Number 68P02966C56-A
Caution: Changes or modifications made in the radio terminal, not expressly approved by
Motorola, will void the user's authority to operate the equipment.
Trademar ks
Motorola and the Motorola logo are registered trademarks of Motorola, Inc.
FlashFile is a trademark of Intel Corporation.
Microsoft, Windows and Pocket PC are registered trademarks of Microsoft Corporation.
The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license in the U.S.
and other countries.
iv
Contents
COMPUTER SOFTWARE COPYRIGHTS i
FCC INTERFERENCE WARNING iii
Introduction 1
What is the Powerpad Terminal 1
Unpacking 5
Installing the Battery 6
Removing the Battery 6
Charging the Battery 7
First Time Battery Charge 8
Routine Battery Charge 9
Battery Maintenance 9
Battery Storage 9
Extending Battery Life 9
Using the Powerpad 10
Starting the Powerpad 10
Turning Off the Powerpad 10
Suspend Mode 10
Using the Keyboard 11
Keys Function 11
Action Keys 12
Scanning With the Powerpad 13
Using the Stylus Pen 14
Resetting the Powerpad 14
Warm Reset 14
Cold Reset 15
Maintaining the Powerpad 15
Accessories 16
Commercial, Government and Industrial Solutions Sector
1301 E. Algonquin Road, Schaumburg, IL 60196
© Motorola Inc., 2002
68P02962C60-O
December, 2002
Troubleshooting 17
Troubleshooting the Powerpad 17
Troubleshooting the UOD 19
Safety Instructions 19
Laser Safety 19
Battery Warnings and Disposal 20
Powerpad On Board Aircraft 20
Battery Disposal 20
To Prevent Injury Or Burns 20
viii
Introduction
Motorola congratulates you on your purchase of the Powerpad
Data Terminal! Its unique functionality and features make this
state-of-the-art ruggedized Personal Digital Assistant (PDA) superior for use in a wide range of applications.
This manual covers the basic setup operations and use of the Powerpad Data Terminal. Since your Powerpad applications are
designed by your company or organization, this manual does not
cover any of the software applications resident in your Powerpad.
For software applications description, contact your company or
organization representative.
The Powerpad network communication and power charge is
through a Universal Office Docking (UOD) unit. Note that this
manual briefly mentions the UOD. For detailed installation and
operation of the UOD, refer to UOD User Manual, Motorola P.N
68P029967C35.
What is the Powerpad Terminal
The Powerpad is a versatile PDA device, based on Microsoft®
Pocket PCTM 2002 platform, with BluetoothTM radio for short distance communication with peripheral devices.
It supports multimedia and audio using a built-in microphone,
speaker and buzzer.
The Powerpad is equipped with a 3.8 inch 4 greyscale LCD with
EL backlighting, viewable in all light conditions. The touch sensitive screen enables stylus signature capture as well as easy selection from an on-screen menu.
A LASER barcode scanner enables reading of 2D barcode labels.
The Powerpad integrates 32MB Flash and 64MB SDRAM mem1
ory space. Memory expansion includes removable 64MB MultiMedia Card (MMC) and removable 3-300MB Compact Flash (CF)
Type II slot. The PowerPad communicates via the Universal Office
Dock (UOD) using an IrDA port or directly via the Bluetooth
radio.
The Powerpad 7.2V 1700 mAh Lithium-Ion battery pack supports
16 hours typical operation and is fully recharged within Three
hours.
Powerpad Parts
LED Indicator
ab
Touch Sensitive Screen
Ab
Barcode Scanner Key
(see page 12)
Navigation Keys
(see page 11)
Speaker
Alphabet Keys
(see page 11)
Numeric Keys
(see page 11)
Microphone
(see page 12)
Power Button
(On/Off/Suspend)
Figure 1.
(see page 10)
Figure 1. Powerpad Front View
Note that the gray and blue colors in picture are for illustration clarity purposes only and do not reflect the actual color of the unit.
Barcode Scanner LASER Window (see page 13)
ab
Buzzer
Battery Release
Button
(see page 6)
Battery Release
Button
Battery
(see page 7)
Docking
Contacts
IrDA Communication Window
Figure 2. Powerpad Back View
Unpacking
The Powerpad Data Terminal package includes the following
items:
• One Powerpad Data Terminal unit
• One 7.2V 1700 mAh Li-ion battery pack
• One Stylus pen
• This Owner’s Manual
Carefully unpack each item from the shipping carton. Check all
items for shipping damage, and check that you have received all
items ordered. If there is damage or missing items, retain the shipping carton for inspection.
The battery is shipped from factory uncharged and not installed.
Charge the battery fully for 24 hours before using the Powerpad for
the first time.
The Powerpad is shipped with a plastic film, protecting the screen.
Before usage, remove the film and use a soft cloth to buff the display. This ensures smooth gliding of the Stylus pen over the surface.
Installing the Battery
The battery is shipped from
the factory uncharged and
not installed. Charge the battery before using the Powerpad for the first time.
To install the battery:
1. Insert the battery, bottom
end first, into the battery
compartment (see Figure
3).
2. Carefully press the battery top downward until
it clicks into place.
Figure 3. Battery Installation
Removing the Battery
Important Note: The Powerpad
enables you to replace batteries without losing information stored in its
memory. To avoid losing information
stored in the memory, a charged battery must be installed within 8 hours
after removing the empty battery.
1. Turn the Powerpad off by holding
the Power button pressed (see Figure 1) for at least four seconds.
2. Press the Release Buttons on the
Figure 4. Battery Removal
battery sides (see Figure 4) and
remove the battery away from the Powerpad.
Charging the Battery
The UOD unit is used for charging the Powerpad battery. Each
UOD has nine slots, one LED per slot, one external IrDA port
(There is no associated LED for this), and the UOD status LED.
Each slot accepts either a Powerpad with a Battery attached, or a
battery by itself. Each of the nine slot LEDs has a number above it,
indicating the associated slot. The slots are laid out in the same
order as the LEDs. When a slot is empty, its corresponding LED
should be off. When you insert a battery, or a Powerpad with a battery into a slot, the slot LED should turn on, indicating the charging
status of the battery (see Table 1). The battery power can also be
tested by pressing the battery power TEST button (see Figure 5).
Battery charge
Universal Office
Dock (UOD)
Slot LEDs
Battery power
test button
Capacity level
LEDs indicator
UOD Status
LED
Powerpad charged
with battery
Figure 5. Universal Office Dock (UOD)
Table 1 shows how LED color relates to battery charging status.
Table 1: Battery Charging Status
Slot LED Color
Indication
No Light
No device inserted.
Blinking Amber
Battery temperature out of tolerance and
charging has been temporarily stopped.
Solid Amber
Powerpad Battery is being charged.
Solid Green
Powerpad Battery is at least 90% charged
after 2.5 hours and fully charged after 3.
Solid Red
Powerpad Battery is not fully charged
after 3 hours of charging, and is considered failed.
First Time Battery Charge
The battery is charged when installed inside the UOD. Charge your
new battery for at least 24 continuous hours before using it or until
the slot LED indicator, turns green. The first time charge is referred
to as initializing and will ensure maximum battery start capacity.
The UOD charges your battery effectively when it is at room temperature (approx. 20°C/68°F ). Battery charging temperature range
is 0°C to 45°C (32°F to 133°F).
The battery remaining capacity is shown by pressing the TEST pad
on back side of your battery and viewing the capacity level LEDs
indicator. Note that the Powerpad can either be in On, Off or Suspend mode, while charging.
Routine Battery Charge
A battery is charged to 90% of its capacity after two and a half
hours (approximately), and is fully charged after three hours,
excluding out-of-range periods. Note that the Powerpad can be in
either On, Off or Suspend mode while charging.
Important: The battery will not charge if Powerpad or battery is
not properly locked inside the UOD slot.
Battery Maintenance
The performance of the rechargeable battery delivered with your
Powerpad depends on the way the battery is treated. Therefore, to
comply with the Motorola warranty for batteries and to assure high
performance and a long life for your Motorola rechargeable battery,
please read and follow the maintenance sections that follows.
Battery Storage
Do not store your battery where the temperatures exceed 60°C/
140°F or fall below -20°C/-4°F.
New Lithium-Ion batteries (i.e. batteries that have never been
charged before) may be stored for up to 3 months in well-ventilated, cool and dry areas without significant loss in lifespan.
Batteries which have already been charged and then stored for
more than 2 months should be recharged before use.
Extending Battery Life
A battery is an expendable part and may need replacing during the
life of the Powerpad. To ensure maximum service life of your Powerpad, always replace the battery with a genuine Motorola replacement. Your UOD will charge your battery effectively when it is at
room temperature (approx. 20°C/68°F). Battery charging temperature range is 0°C to 45°C (32°F to 133°F).
Using the Powerpad
Starting the Powerpad
Press the Power button to start the Powerpad (see Figure 6). The
Powerpad also powers on immediately when the battery is inserted.
As the Powerpad initializes its unique FlashFileTM system, the
Motorola logo displays for about one minute. Note that this screen
also appears every time you perform a restart.
Turning Off the Powerpad
When the Powerpad is on or in Suspend mode, hold the Power button pressed (see Figure 6) for at least four seconds, to turn off the
Powerpad.
Suspend Mode
The Suspend mode is used for saving the Powerpad battery power
by turning off the display and computer sections of the Powerpad,
while keeping the Bluetooth radio powered on.
When the Powerpad is on, press the Power button (see Figure 6) to
toggle between Suspend and Resume modes. During the Suspend
mode, the display turns off and the LED indicator blinks (see Figure 1).
When the Powerpad resumes, it returns to the screen displayed
prior to the Suspend mode.
Use the Suspend mode as often as possible to save battery power.
10
Using the Keyboard
Keys Function
Figure 6 provides general function description of the Powerpad
keyboard.
Note: Key functions may change by application. In such case,
your keyboard does not function exactly as described.
Barcode Scanner
Up Key
Down Key
Help Key
(numeric mode)
Alpha Keys
Numeric Keys
Clear Screen
(alpha mode) or
All (numeric mode)
• Press to toggle between alpha and
numeric modes
• In numeric mode, press to produce yellow numbers/symbols
• Hold pressed for 2 sec to turn Back-light
On/Off
Hold pressed for 4
sec to turn On/
Off. When On,
press to toggle
between On &
Suspend
Blank Space (alpha mode)
Erase (numeric mode)
Figure 6. PowerPad Key Functions
11
Action Keys
Table 2 describes the action keys combinations.
Table 2: Action Keys Combinations
Action
Keys
Lower Case to Upper Case
Letters (default is capitalize)
SHIFT+ any alphabet key
Function Mode
SHIFT + SP toggles to function mode
Sound Record Application
In function mode, Press the R key
Touch Screen Calibration
Application
In function mode, Press the C key for
the touch screen calibration application
Warm Reset (see also Resetting the Powerpad)
GO + H + CLR
Increase Screen Contrast
Level
SHIFT + Up key to increase contrast
level
Decrease Screen Contrast
Level
SHIFT + Down key to decrease the
contrast level
Screen Calibration
SHIFT + SP + C to enter screen calibration mode
Pocket PC Menu
SHIFT + Scan to start Pocket PC
menu
12
Scanning With the Powerpad
The Powerpad has an integrated Laser scanner which gathers data
by scanning barcodes. The Powerpad is equipped with one SCAN
trigger button, designed for left-handed and right-handed users.
The button is located at the center of the terminal navigation key
panel.
To scan barcodes with the Powerpad, aim the scanner at the barcode and press the SCAN trigger button (see Figure 7). Ensure the
red scan beam covers the entire barcode. The LED indicator shows
green light and a beep sounds to indicate a successful decode.
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
LUMIERE LASER
NE PAS REGARDER LE RAYON FIXEMENT
PRODUIT LASER DE CLASSE 2
45° Scan
Angle
Scan Trigger Button
Figure 7. Scanning With the Powerpad
13
Using the Stylus Pen
The Stylus pen selects items and enters information. Use the pen as
you use your PC mouse.
•
•
•
To open and select screen items, tap on the item with the pen.
To drag text or image items, hold the pen on the item and drag
across the screen.
To see a list of actions available for a specific item, tap-andhold the pen on an item. When the pop-up menu appears, tap
the action you want to perform.
Resetting the Powerpad
You may need to reset your
Powerpad; for example, you
may reset due to communication cut-off, or when the operating system stops responding.
When your Powerpad stops
responding, do the following
actions:
Warm Reset
Figure 8. Warm Reset
Important Note: When Powerpad is warm booted, all
recorded information remains stored in memory.
Simultaneously press keys H + CLR + GO (see Figure 8) for one
second; the Powerpad will function again.
If your Powerpad still does not respond, perform “Cold Reset”:
14
Cold Reset
Cold reset restarts the
Powerpad by erasing
all stored records and
entries.
Memory Cards Door
Do Not perform Cold
reset unless Warm reset
does not resolve your
problem.
Cold reset is performed by removing
the battery and inserting a pin shaped object
into the hole located on
the back side of the
memory cards door
(see Figure 9).
Reset hole
For Cold Reset: insert a pin
shaped object into the hole
Figure 9. Cold Reset
Maintaining the Powerpad
In order to maintain your Powerpad in good working order:
•
•
•
•
•
Do not scratch the screen. Use only Motorola supplied stylus
pen with the touch-sensitive screen.
Never use a pen or pencil or any sharp object on the screen.
Although your Powerpad is water and dust resistant, do not
expose it to rain or moisture for long periods of time.
Protect your Powerpad from temperature extremes. Do not
leave the Powerpad on the dashboard of a car on a hot day, and
keep the Powerpad away from hot places.
Do not drop your Powerpad or subject it to strong impact.
15
•
Treat your Powerpad as you would a cellular phone or other
small and sensitive electronic devices.
Do not store or use your Powerpad in any location that is
extremely dusty, damp or wet.
If the battery contacts, screen or surface of the Powerpad
becomes dirty, use a soft lint free cloth moistened with diluted
Isopropyl Alcohol (IPA) solution for removing dirt. The Isopropyl Alcohol (IPA) can be diluted with water up to 20%.
•
•
Accessories
Motorola recommends the use of the following accessories with
your terminal. Please refer to your company for more information.
It is the responsibility of the user to use only the approved accessories supplied for this product, as detailed in Table 3 . Motorola is
not responsible for the use of accessories not approved for this
product.
The following Motorola approved accessories are for use with your
terminal. For information on the availability of these accessories,
please call your company supplier.
Table 3: Accessories
Motorola Approved Accessory
Part Number
Powerpad
F4420A
Battery
FTN6032A
Stylus
FLN9805A
16
Troubleshooting
Troubleshooting the Powerpad
Table 4: Troubleshooting the Powerpad
Problem
Powerpad does
not turn on.
Powerpad red
LED does not
stop blink or
battery refuse
to charge.
Cause
Solution
Battery not
charged.
Ensure proper battery installation in Powerpad.
Charge or replace the battery.
Powerpad in Suspend mode.
Press the Power Button.
Powerpad is not
locked in UOD.
Reinstall Powerpad in UOD.
Lock the Powerpad properly
in UOD (see that the UOD
amber LED is on and charge
for three hours.
Battery temperature is incorrect
Ensure that the battery temperature range is 0°C to 45°C
(32°F to 133°F).
Powerpad does
not detect scan
input.
Bad battery.
Replace battery.
LASER beam does
not cover the entire
barcode symbol.
Scan again and make sure
that the entire barcode symbol is covered.
Unreadable barcode.
Be sure the barcode symbol
is not covered or damaged.
17
Table 4: Troubleshooting the Powerpad
Problem
Powerpad
stopped
responding.
Cause
Solution
Problem in Powerpad operating system or
communication
network.
Simultaneously press soft
keys H+CLR+GO for at least
one second; the Powerpad
should function again.
If still does not respond, perform Cold rest (see “Resetting the Powerpad” on
page 14). The operation system will reboot for about a
minute.
Incomplete or
no data transmission
between Powerpad and PC.
18
Powerpad is not
locked in UOD.
Lock the Powerpad properly
in UOD (see that the red
LED is on).
UOD or Powerpad
contacts are not
clean.
Clean contacts and remove
dust and objects from within
the UOD.
Communication
software was incorrectly installed or
configured.
Refer to the UOD user manual or see your System
Administrator.
Troubleshooting the UOD
Following are some UOD unit LED status indications, and likely
root causes for the problems they indicate.
Table 5: Troubleshooting the UOD
LED Color
Status
Solid Red or Blinking Red
The UOD has failed start-up or self-test.
Blinking Amber
The UOD is unable to communicate over
the Fast Ethernet LAN.
Blinking Amber
The UOD is unable to obtain information.
Safety Instructions
Laser Safety
•
•
•
•
•
•
DANGER - LASER LIGHT WHEN OPEN, AVOID DIRECT
EYE EXPOSURE
CAUTION - LASER LIGHT - DO NOT STARE INTO BEAM
CLASS II LASER PRODUCT, 650 nm LASER, 0.9 mW
MAX. OUTPUT, COMPLIES WITH 21 CFR 1040.10 &
1040.11, IEC60825-1:1993 + A1:1997 + A2: 2001
Do not aim the beam into a human eye
Press the "SCAN" button only when the aperture is aimed at
the barcode
CAUTION - Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous radiation exposure
19
Battery Warnings and Disposal
Powerpad On Board Aircraft
Always remove the battery from the Powerpad when shipped via
air. Any use of the Powerpad must be in accordance with applicable regulations per airline crew instructions.
Battery Disposal
Batteries must be recycled or disposed of properly in accordance
with local requirements. Recycling facilities may not exist in all
areas. Please contact your local environmental agency for more
information regarding proper disposal.
To Prevent Injury Or Burns
• USE ONLY SPECIFIED BATTERIES AND CHARGERS.
• DO NOT DISPOSE OF ANY BATTERIES IN FIRE, AS
THEY MAY EXPLODE!
• DO NOT PUNCTURE OR ALLOW METAL TO CONTACT
THE BATTERY TERMINALS.
• DO NOT DISPOSE OF IN WATER.
• DO NOT DISASSEMBLE.
• DO NOT STORE ABOVE 60C/140F
20
21
Index
Accessories 16
Aircraft 20
Alpha Keys 11
Back 4
Barcode Scanner 11
Barcode Scanner Key 3
Barcode Scanner LASER
Window 4
Battery Charge 8
Battery charging temperature
range 8
Battery Life 9
Battery Maintenance 9
battery power 7
battery remaining capacity 8
Battery temperature 8
beam 13
Bluetooth 1
Burns 20
Buzzer 4
Calibration Application 12
CF 2
Charging Status 8
Clear Screen 11
Cold Reset 15
Compact Flash 2
Decrease Contrast 12
Disposal 20
Docking Contacts 4
Down Key 11
Erase 11
external IrDA port 7
Front 3
Function 11
Function Mode 12
Increase Contrast 12
Installing the Battery 6
IrDA Communication Window
Isopropyl Alcohol 16
Keyboard 11
Laser Safety 19
LCD 1
LED Indicator 3
locked 9
losing information stored in the
memory 6
Lower Case 12
22
M
Memory Cards Door 15
memory space 1
Microphone 3
MMC 2
nine slot LEDs 7
not charged 17
numbers/symbols 11
Numeric Keys 11
Numeric mode 11
Pocket PC 1
Pocket PC Menu 12
Power Button (On/Off/Suspend)
Prevent Injury 20
propyl Alcohol 16
Record Application 12
Release Buttons 6
removable MultiMedia Card 2
removing dirt 16
Removing the Battery 6
Resetting 14
Routine Battery Charge 9
Scanning 13
Screen Calibration 12
SDRAM 1
slots 7
Space 11
23
Speaker 3
Starting 10
Storage 9
Stylus 14
Suspend 10
toggle 11
Touch Sensitive Screen 3
trigger button 13
Troubleshooting 19
Turning Off 10
Unpacking 5
UOD 1
UOD status LED 7
Up Key 11
Upper Case 12
Using 10
Warm Reset 14
HOW TO REACH US:
Commercial, Government and
Industrial Solutions Sector
1301 E. Algonquin Road,
Schaumburg, IL 60196
Visit our Web site at
www.motorola.com
MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office.
All other product or service names are the property of their respective owners.
© Motorola, Inc. 2002.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:12:16 10:54:50Z
Modify Date                     : 2003:02:18 12:09:36-08:00
Page Count                      : 35
Creation Date                   : 2002:12:16 10:54:50Z
Producer                        : Acrobat Distiller 4.05 for Windows
Mod Date                        : 2003:02:18 12:09:36-08:00
Metadata Date                   : 2003:02:18 12:09:36-08:00

EXIF Metadata provided by EXIF.tools