Motorola Solutions 89FT7051 Portable VoWLAN Transceiver with Bluetooth User Manual Exhibit 8 Users Manual RF Warning

Download:
Mirror Download [FCC.gov]
Document ID	1748481
Application ID	LjJ0DpZ8SbX2aylu453tfA==
Document Description	Exhibit 8 Users Manual RF Warning
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	74.31kB (928911 bits)
Date Submitted	2012-07-20 00:00:00
Date Available	2012-07-20 00:00:00
Creation Date	2017-10-30 22:12:17
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-30 22:12:17
Document Title	TRG7000 Trigger Handle Quick Reference Guide (P/N 72-73348-03 Rev. A)
Document Creator	FrameMaker 9.0
Document Author:	Motorola, Inc.

EWP2000 AND
EWP3000 SERIES
BUSINESS
SMARTPHONE
REGULATORY GUIDE
BEFORE USING THIS ENTERPRISE WiFi PHONE (EWP), READ THIS BOOKLET
WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE
AND RF ENERGY AWARENESS AND CONTROL INFORMATION AND
OPERATIONAL INSTRUCTIONS FOR COMPLIANCE WITH RF ENERGY
EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL
STANDARDS. ALSO READ THE OPERATIONAL INSTRUCTIONS FOR SAFE
USAGE.
Regulatory Information
This device is approved under Motorola Solutions, Inc.
This guide applies to the following Model Numbers: EWP2200 and EWP3200.
All Motorola devices are designed to be compliant with rules and regulations in locations
they are sold and will be labeled as required.
Local language translations are available at the following website:
supportcentral.motorola.com
Any changes or modifications to Motorola equipment, not expressly approved by
Motorola, could void the user's authority to operate the equipment.
Declared maximum operating temperature: 50°C (122°F).
CAUTION
Use only Motorola approved and UL Listed accessories, battery
packs and battery chargers.
Do NOT attempt to charge damp/wet devices or batteries. All
components must be dry before connecting to an external power
source.
RISK OF EXPLOSION IF BATTERY IS REPLACED WITH
INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE BATTERY MANUFACTURER’S
INSTRUCTIONS.
Bluetooth® Wireless Technology
This is an approved Bluetooth product. For more information or to view the End Product
Listing, please visit:
http://www.bluetooth.org/tpg/listings.cfm.
Wireless Devices Country Approvals
Motorola reserves the right to make changes to any product to improve reliability,
function, or design.
Motorola does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
Regulatory markings, subject to certification, are applied to the device signifying the
radio(s) are approved for use in the following countries: United States, Canada, S.
Korea, Australia, and Europe1.
Please refer to the Motorola Declaration of Conformity (DoC) for details of other country
markings. This is available at:
www.motorola.com/enterprisemobility/doc.
Note 1: For 2.4GHz or 5GHz Products: Europe includes Austria, Belgium, Bulgaria,
Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CAUTION Operation of the device without regulatory approval is illegal.
No license is granted, either expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which Motorola products might be used. An
implied license exists only for equipment, circuits, and subsystems contained in
Motorola products.
Country Roaming
Warranty
Frequency of Operation - FCC and IC
For the complete Motorola hardware product warranty statement, go to:
http://www.motorola.com/enterprisemobility/warranty.
This device incorporates the International Roaming feature (IEEE802.11d) which will
ensure the product operates on the correct channels for the particular country of use.
5 GHz Only
The use in the UNII (Unlicensed National Information Infrastructure) band 1 5150-5250
MHz band is restricted to Indoor Use Only; any other use will make the operation of this
device illegal.
Industry Canada Statement:
CAUTION
Motorola Solutions, Inc.
1301 E. Algonquin Rd.
Schaumburg, IL 60196-1078, U.S.A.
http://www.motorolasolutions.com
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC
and are used under license. All other trademarks are the property of their
respective owners.
© 2011 Motorola Solutions, Inc. All Rights Reserved.
@6802987C72@
6802987C72 Rev. B — February 2012
The device for the band 5150-5250 MHz is only for indoor usage
to reduce potential for harmful interference to co-Channel mobile
satellite systems. High power radars are allocated as primary
users (meaning they have priority) of 5250-5350 MHz and 56505850 MHz and these radars could cause interference and/or
damage to LE-LAN devices.
AVERTISSEMENT Le dispositive fonctionnant dans la bande 5150-5250 MHz
est réservé uniquement pour une utilisation à l'intérieur afin
de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux.
Les utilisateurs de radars de haute puissance sont désignés
utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les
bands 5250-5350 MHz et 5650-5850 MHz et que ces
radars pourraient causer du brouillage et/ou des dommages
aux dispositifs LAN-EL.
2.4 GHz Only
The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The
range of channels is limited by firmware.
Health and Safety Recommendations
Phone Mode - Operating Instructions
Ergonomic Recommendations
When placing or receiving a phone call, hold the product as you would a wireless
telephone, and talk directly into the microphone.
CAUTION In order to avoid or minimize the potential risk of ergonomic injury
follow the recommendations below. Consult with your local Health &
Safety Manager to ensure that you are adhering to your company’s
safety programs to prevent employee injury.
•
•
•
•
•
•
•
•
•
•
•
Reduce or eliminate repetitive motion
Maintain a neutral postures
Reduce or eliminate excessive force
Keep objects that are used frequently within easy reach
Perform tasks at correct heights
Reduce or eliminate vibration
Reduce or eliminate direct pressure
Provide adjustable workstations
Provide adequate clearance
Provide a suitable working environment
Improve work procedures
EU
Handheld Devices
This device was tested for typical body-worn operation. Use only Motorola tested and
approved belt-clips, holsters, and similar accessories to ensure EU Compliance.
US and Canada
Phones (placed to ear or used with headset)
Use only Motorola tested and approved belt-clips, holsters, and similar accessories to
ensure FCC Compliance. The use of third-party belt-clips, holsters, and similar
accessories may not comply with FCC RF exposure compliance requirements, and
should be avoided. The FCC has granted an Equipment Authorization for these model
phones with all reported SAR levels evaluated as in compliance with the FCC RF
emission guidelines. SAR information on these model phones is on file with the FCC
and can be found under the Display Grant section of:
http://www.fcc.gov/oet/fccid.
Co-located statement
RF Energy Exposure
This Enterprise WiFi Phone is intended for use in general population/uncontrolled
environment.
This Enterprise WiFi Phone uses electromagnetic energy in the radio frequency (RF)
spectrum to provide communications between two or more users over a distance. It
uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy
is one form of electromagnetic energy. Other forms include, but are not limited to,
sunlight and x-rays. RF energy, however, should not be confused with these other forms
of electromagnetic energy, which when used improperly, can cause biological damage.
Very high levels of x-rays, for example, can damage tissues and genetic material.
Experts in science, engineering, medicine, health, and industry work with organizations
to develop standards for safe exposure to RF energy. These standards provide
recommended levels of RF exposure for both workers and the general public. These
recommended RF exposure levels include substantial margins of protection.
All Motorola radio products are designed, manufactured, and tested to ensure they meet
government-established RF exposure levels. In addition, manufacturers also
recommend specific operating instructions to users of products with radios.
These instructions are important because they inform users about RF energy exposure
and provide simple procedures on how to control it.
Please refer to the following websites for more information on what RF energy exposure
is and how to control your exposure to assure compliance with established RF exposure
limits:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
http://www.osha.gov/SLTC/radiofrequencyradiation/ index.html
To comply with FCC RF exposure compliance requirement, the antenna used for this
transmitter must not be co-located or operating in conjunction with any other transmitter/
antenna except those already approved in this filling.
Handheld Devices
This device was tested for typical body-worn operation. Use only Motorola tested and
approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The
use of third-party belt-clips, holsters, and similar accessories may not comply with FCC
RF exposure compliance requirements, and should be avoided.
Approved Accessories
Use only Motorola-approved supplied or replacement, batteries, and accessories. Use
of non–Motorola batteries and accessories may exceed IEEE/ICNIRP RF exposure
guidelines.
For a list of Motorola-approved batteries and other accessories please see your dealer
or local Motorola contact. Your nearest dealer can be found at the following web site:
http://www.motorola.com/cgiss/emea/dealerlocator.html
Additional Information
For additional information on exposure requirements or other training information, visit:
http://www.motorola.com/rfhealth.
Compliance with RF Exposure Standards
Please observe all warning notices with regard to the usage of wireless devices.
Your Motorola Enterprise WiFi Phone is designed and tested to comply with a number of
national and International standards and guidelines (listed below) for human exposure
to radio frequency electromagnetic energy.
This Enterprise WiFi Phone complies with the IEEE (FCC) and ICNIRP exposure limits
for general population/uncontrolled environments.
Your Motorola Enterprise WiFi Phone complies with the following RF energy exposure
standards and guidelines:
• United States Federal Communications Commission,
• Code of Federal Regulations; 47 CFR part 2 sub-part J
• American National Standards Institute (ANSI) / Institute of Electrical and Electronic
Engineers (IEEE) C95. 1-1992
• Institute of Electrical and Electronic Engineers (IEEE)
• C95.1-1999 Edition
• Institute of Electrical and Electronic Engineers (IEEE)
• C95.1-2005 Edition
• International Commission on Non- Ionizing Radiation Protection (ICNIRP) 1998
• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio
frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz,
1999
• Australian Communications Authority Radio communications (Electromagnetic
Radiation – Human Exposure) Standard, 2003
•
ANATEL ANNEX to Resolution No. 303 of July 2, 2002
"Regulation of limitation of exposure to electrical, magnetic and electromagnetic
fields in the radio frequency range between 9 KHz and 300 GHz" and "Attachment to
resolution # 303 from July 2, 2002".
The device complies with Internationally recognized standards covering human
exposure to electromagnetic fields from radio devices. For information on "International"
human exposure to electromagnetic fields refer to the Motorola Declaration of
Conformity (DoC) at:
www.motorola.com/enterprisemobility/doc.
Electromagnetic Interference/Compatibility
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
RF Exposure Operating Instructions
To control your exposure and ensure compliance with the general population/
uncontrolled environment exposure limits, always adhere to the following procedures:
• When worn on the body, always place the Enterprise WiFi Phone in a Motorolaapproved clip, holder, holster, case, or body harness for this product. Using
approved body-worn accessories is important because the use of non-Motorolaapproved accessories may result in exposure levels, which exceed the IEEE/
ICNIRP general population/uncontrolled environment RF exposure limits.
NOTE Nearly every electronic device is susceptible to electromagnetic interference
(EMI) if inadequately shielded, designed or otherwise configured for electromagnetic
compatibility.
To avoid electromagnetic interference and/or compatibility conflicts, turn off your
Enterprise WiFi Phone in any facility where posted notices instruct you to do so.
Hospitals or health care facilities may be using equipment that is sensitive to external
RF energy.
When instructed to do so, turn off your Enterprise WiFi Phone when on board an
aircraft. Any use of an Enterprise WiFi Phone must be in accordance with applicable
regulations per airline crew instructions.
If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in
flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect medical electrical
equipment.
Wireless devices should be switched off wherever you are requested to do so in
hospitals, clinics or healthcare facilities. These requests are designed to prevent
possible interference with sensitive medical equipment.
Pacemakers
The Advanced Medical Technology Association (AdvaMed) recommends that a
minimum separation of 15 cms (6 inches) be maintained between an Enterprise WiFi
Phone with wireless radios and a pacemaker. These recommendations are consistent
with those of the U.S. Food and Drug Administration.
Persons with pacemakers should:
• ALWAYS keep the Enterprise WiFi Phone more than 15 cms from their pacemaker
when the Enterprise WiFi Phone is turned ON.
• Not carry the Enterprise WiFi Phone in the breast pocket.
• Use the ear opposite the pacemaker to minimize the potential for interference.
• Turn the Enterprise WiFi Phone OFF immediately if you have any reason to suspect
that interference is taking place.
Hearing Aids
Some digital Enterprise WiFi Phone with wireless radios may interfere with some
hearing aids. In the event of such interference, you may want to consult your hearing aid
manufacturer to discuss alternatives.
When some wireless devices are used near some hearing devices (hearing aids and
cochlear implants), users may detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this interference noise, and wireless
devices also vary in the amount of interference they generate. In the event of
interference you may want to consult your hearing aid supplier to discuss solutions.
When batteries are stored over six (6) months, some irreversible deterioration in overall
battery quality may occur. Store batteries at half of full charge in a dry, cool place,
removed from the equipment to prevent loss of capacity, rusting of metallic parts and
electrolyte leakage. When storing batteries for one year or longer, the charge level
should be verified at least once a year and charged to half of full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Motorola batteries is Three (3) months, regardless if the
battery was purchased separately or included as part of the mobile computer or bar
code scanner. For more information on Motorola batteries, please visit:
http://www.mysymbolcare.symbol.com/battery/batbasics1.html
Other Medical Devices
Battery Safety Guidelines
If you use any other personal medical device, consult the manufacturer of your device to
determine if it is adequately shielded from RF energy. Your physician may be able to
assist you in obtaining this information.
Use of Communication Devices While Driving
Always check the laws and regulations on the use of radios in the areas where you
drive.
• Give full attention to driving and to the road.
• Use hands-free operation, if available.
• Pull off the road and park before making or answering a call, if driving conditions or
regulations so require.
•
•
•
•
•
•
Operational Warnings
•
•
WARNING
For Vehicles with Air Bags
Refer to vehicle manufacturer's manual prior to installation of electronic equipment to
avoid interference with air bag wiring.
Do not place the Enterprise WiFi Phone in the area over an air bag or in the air bag
deployment area. Air bags inflate with great force. If an Enterprise WiFi Phone is placed
in the air bag deployment area and the air bag inflates, the Enterprise WiFi Phone may
be propelled with great force and cause serious injury to occupants of the vehicle.
Potentially Explosive Atmospheres
(Explosive atmospheres refer to hazard classified locations that may contain
hazardous gas, vapors, or dusts.)
Turn off your Enterprise WiFi Phone prior to entering any area with a potentially
explosive atmosphere. Do not remove, install, or charge batteries in such areas. Sparks
in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily
injury or even death.
The areas with potentially explosive atmospheres referred to above include fuelling
areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas
where the air contains chemicals or particles, such as grain, dust or metal powders.
Areas with potentially explosive atmospheres are often but not always posted.
Blasting Caps and Blasting Areas
To avoid possible interference with blasting operations, turn off your Enterprise WiFi
Phone when you are near electrical blasting caps, in a blasting area, or in areas posted:
"Turn off radio". Obey all signs and instructions.
Power Supply
Use ONLY a LISTED Motorola, Type no. PWRS-14000 (5Vdc, 850mA), direct plug-in
power supply, marked Class 2 or LPS (IEC60950-1, SELV). Use of alternative Power
Supply will invalidate any approvals given to this unit and may be dangerous.
Batteries
Operational Cautions
CAUTION
All batteries can cause property damage and/or bodily injury such as burns if a
conductive material such as jewelry, keys, or beaded chains touch exposed terminals.
The conductive material may complete an electrical circuit (short circuit) and become
quite hot. Exercise care in handling any charged battery, particularly when placing it
inside a pocket, purse, or other container with metal objects.
Taiwan - Recycling
EPA (Environmental Protection Administration) requires dry
battery producing or importing firms in accordance with Article 15
of the Waste Disposal Act are required to indicate the recycling
marks on the batteries used in sales, giveaway or promotion.
Contact a qualified Taiwanese recycler for proper battery
disposal.
Battery Information
Use only Motorola approved batteries. Accessories which have battery charging
capability are approved for use with the following battery models:
Motorola BK10 (3.7 Vdc, 1750 mAh) for EWP3200 and BK10 (3.7 Vdc, 1750 mAh) and
BK90 (3.7 Vdc, 1480 mAh) for EWP2200.
Motorola rechargeable battery packs are designed and constructed to the highest
standards within the industry.
However, there are limitations to how long a battery can operate or be stored before
needing replacement. Many factors affect the actual life cycle of a battery pack, such as
heat, cold, harsh environmental conditions and severe drops.
•
•
•
•
•
•
•
•
•
The area in which the units are charged should be clear of debris and combustible
materials or chemicals. Particular care should be taken where the device is charged
in a non commercial environment.
Follow battery usage, storage, and charging guidelines found in the user's guide.
Improper battery use may result in a fire, explosion, or other hazard.
To charge the mobile device battery, the battery and charger temperatures must be
between +32ºF and +104ºF (0ºC and +40ºC)
Do not use incompatible batteries and chargers. Use of an incompatible battery or
charger may present a risk of fire, explosion, leakage, or other hazard. If you have
any questions about the compatibility of a battery or a charger, contact Motorola
Enterprise Mobility support.
For devices that utilize a USB port as a charging source, the device shall only be
connected to products that bear the USB-IF logo or have completed the USB-IF
compliance program.
Do not disassemble or open, crush, bend or deform, puncture, or shred.
Severe impact from dropping any battery-operated device on a hard surface could
cause the battery to overheat.
Do not short circuit a battery or allow metallic or conductive objects to contact the
battery terminals.
Do not modify or remanufacture, attempt to insert foreign objects into the battery,
immerse or expose to water or other liquids, or expose to fire, explosion, or other
hazard.
Do not leave or store the equipment in or near areas that might get very hot, such as
in a parked vehicle or near a radiator or other heat source. Do not place battery into
a microwave, oven or dryer.
Battery usage by children should be supervised.
Please follow local regulations to promptly dispose of used re-chargeable batteries.
Do not dispose of batteries in fire.
Seek medical advice immediately if a battery has been swallowed.
In the event of a battery leak, do not allow the liquid to come in contact with the skin
or eyes. If contact has been made, wash the affected area with large amounts of
water and seek medical advice.
If you suspect damage to your equipment or battery, contact Motorola Enterprise
Mobility support to arrange for inspection.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of batteries according to instructions.
Radio Frequency Interference Requirements-FCC
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
For RLAN Devices:
The use of 5 GHz RLAN’s, for use in Canada, have the following restrictions:
• Restricted Band 5.60 – 5.65 GHz
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux
appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions
suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce
dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de
provoquer un fonctionnement indésirable.
www.motorola.com/recycling/weee.
www.motorola.com/recycling/weee
Label Marking: The Term “IC:” before the radio certification only signifies that Industry
Canada technical specifications were met.
Marking and European Economic Area (EEA)
The use of 2.4 GHz RLAN's, for use through the EEA, have the following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 2.4835 GHz
• France, outside usage is restricted to 2.4 - 2.454 GHz.
• Italy requires a user license for outside usage.
Bluetooth® Wireless Technology for use through the EEA has the following restrictions:
• Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 2.4835 GHz
• France, outside usage is restricted to 10mW EIRP
• Italy requires a user license for outside usage.
Motorola hereby, declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of
Conformity may be obtained from:
www.motorola.com/enterprisemobility/doc.
www.motorola.com/recycling/weee
Dansk: Til kunder i EU: Alle produkter skal returneres til Motorola til recirkulering, når de er udtjent. Læs
oplysningerne om returnering af produkter på:
www.motorola.com/recycling/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an
Motorola zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter:
www.motorola.com/recycling/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Motorola'ile.
Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi:
www.motorola.com/recycling/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Motorola al final de su
ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto, visite:
www.motorola.com/recycling/weee.
www.motorola.com/recycling/weee.
Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à
Motorola pour recyclage. Pour de plus amples informations sur le retour de produits, consultez :
www.motorola.com/recycling/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere
restituiti a Motorola al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il
seguente sito Web:
www.motorola.com/recycling/weee.
Korea Warning Statement for Class B ITE
기 종 별
B급 기기
(가정용 방송통신기기 )
사 용 자 안 내 문
www.motorola.com/recycling/weee.
이 기기는 가정용(B급)으로 전자파적합등록을
한 기기로서 주로 가정에서 사용하는 것을 목적
으로 하며, 모든 지역에서 사용할 수 있습니다 .
www.motorola.com/recycling/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Motorola vállalathoz kell eljuttatni
újrahasznosítás céljából. A termék visszajuttatásának módjával www.motorola.com/recycling/weee.
Other Countries
Australia
Use of 5GHz RLAN's in Australia is restricted in the following band 5.50 - 5.65GHz.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Motorola te
worden teruggezonden voor recycling. Raadpleeg
www.motorola.com/recycling/weee voor meer informatie over het terugzenden van producten.
Brazil
Declarações Regulamentares para EWP2200 e EWP3200
Nota: "A marca de certificação se aplica ao Transceptor, modelo EWP2200 e
EWP3200. Este equipamento opera em caráter secundário, isto é, não tem direito a
proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não
pode causar interferência a sistemas operando em caráter primário."
Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br
CHILE
Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de
telecomunicaciones, relativa a radiaciones electromagnéticas.
www.motorola.com/recycling/weee.
Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Motorola para
reciclagem. Para obter informações sobre como devolver o produto, visite:
www.motorola.com/recycling/weee.
Românesc: Pentru clienþii din UE: Toate produsele, la sfârºitul duratei lor de funcþionare, trebuie returnate la
Motorola pentru reciclare. Pentru informaþii despre returnarea produsului, accesaþi:
www.motorola.com/recycling/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Motorola za reciklažo.
Za informacije o vraèilu izdelka obišèite:
www.motorola.com/recycling/weee.
Mexico
Restrict Frequency Range to: 2.450 - 2.4835 GHz.
www.motorola.com/recycling/weee.
S. Korea
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Motorola-yhtiöön,
kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa:
www.motorola.com/recycling/weee.
해당 무선설비는 운용 중 전파혼신 가능성이 있음
해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 .
Taiwan
臺灣
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Motorola för
återvinning. Information om hur du returnerar produkten finns på
www.motorola.com/recycling/weee.
Turkish WEEE Statement of Compliance
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機 ，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之
特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方
得繼續使用。
前項合法通信，指依電信規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
在5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。
Waste Electrical and Electronic
Equipment (WEEE)
English: For EU Customers: All products at the end of their life must be returned to Motorola for recycling. For
information on how to return product, please go to:
EEE Yönetmeliğine Uygundur
Software Support
Motorola Enterprise Mobility wants to ensure that customers have the latest entitled
software at the time of device purchase in order to keep the device operating at peak
performance levels. To confirm that your Motorola device has the latest entitled software
available at the time of purchase, visit http://www.motorola.com/enterprisemobility.
Check for the latest software from Support > Enterprise Mobility Products, or search for
the device and select Support > Software Downloads.
If your device does not have the latest entitled software as of your device purchase
date, e-mail Motorola at entitlementservices@motorola.com and ensure you include the
following essential device information:
• Model number
• Serial number
• Proof of purchase
• Title of the software download you are requesting.
If it is determined by Motorola that your device is entitled to the latest version of
software, as of the date you purchased your device, you will receive an e-mail
containing a link directing you to a Motorola Web site to download the appropriate
software.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Motorola, Inc.
Create Date                     : 2011:02:11 14:11:17Z
Modify Date                     : 2012:07:20 13:23:58-04:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : Motorola, Inc.
Title                           : TRG7000 Trigger Handle Quick Reference Guide (P/N 72-73348-03 Rev. A)
Creator Tool                    : FrameMaker 9.0
Metadata Date                   : 2012:07:20 13:23:58-04:00
Producer                        : Acrobat Distiller 9.4.6 (Windows)
Document ID                     : uuid:5c1c12bf-f81e-405d-b6f5-3b82416ed3ff
Instance ID                     : uuid:94129d94-7c9a-4804-8246-7b162174dc1e
Page Mode                       : UseNone
Page Count                      : 2

EXIF Metadata provided by EXIF.tools