Motorola Solutions 92FT7076 Mobile 2-Way Radio User Manual MOTOTRBO Professional Digital Two Way Radio System

Motorola Solutions, Inc. Mobile 2-Way Radio MOTOTRBO Professional Digital Two Way Radio System

Contents

Manual

PROFESSIONAL DIGITAL TWO-WAY RADIOMOTOTRBO™XPR 5550/XPR 5580/XPR 5550e/XPR 5580e COLOR DISPLAY MOBILE USER GUIDE
ContentsDeclaration of Conformity....................... 14Important Safety Information........16Software Version............................17Version logicielle........................... 18Computer Software Copyrights....19Getting Started............................... 20How to Use This Guide..................................20What Your Dealer/System AdministratorCan Tell You.............................................20Preparing Your Radio for Use.......22Powering Up the Radio..................................22Adjusting the Volume.....................................22Identifying Radio Controls............ 24Radio Controls...............................................24Using the Volume/Channel Knob.................. 24Non-Connect Plus Operations......25Additional Radio Controlsin Non-Connect PlusMode.................................... 26Push-To-Talk (PTT) Button.................26Programmable Buttons....................... 26Assignable Radio Functions.....27Assignable Settings or UtilityFunctions............................ 30Accessing the ProgrammedFunctions....................................... 30Contents1English
Identifying Status Indicators................31Display Icons............................31Call Icons................................. 34Advanced Menu Icons..............34Mini Notice Icons......................35Sent Item Icons ....................35Bluetooth Device Icons............ 36Job Tickets Icons..................... 36LED Indicator........................... 36Alert Tones...............................37Indicator Tones........................ 38Switching Between ConventionalAnalog and Digital Mode................38IP Site Connect ...............................39Capacity Plus ..................................39Linked Capacity Plus ...................... 40Making and Receiving Callsin Non-Connect PlusMode.................................... 42Selecting a Zone.................................42Selecting a Channel............................42Receiving and Responding to aRadio Call...................................... 43Receiving and Respondingto a Group Call....................43Receiving and Respondingto a Private Call .............. 44Receiving an All Call ............... 44Receiving and Respondingto a Selective Call ........... 45Receiving and Respondingto a Phone Call ............... 46Making a Radio Call............................47Making a Group Call................ 48Making a Private Call ...........49Making an All Call ................... 50Making a Selective Call ....... 50Making a Phone Call................51Making a Private Call with aOne Touch Call Button........52Making a Group, Private orAll Call with theProgrammable NumberKey .....................................53Stopping a Radio Call .....................54Talkaround..........................................55Contents2English
Advanced Features in Non-Connect Plus Mode............ 56Radio Check....................................... 56Sending a Radio Check........... 56Remote Monitor.................................. 57Initiating Remote Monitor......... 58Stopping Remote Monitor........ 59Scan Lists........................................... 59Viewing an Entry in theScan List............................. 59Editing the Scan List................ 60Scan....................................................62Starting and Stopping Scan..... 62Responding to aTransmission During aScan....................................63Deleting a Nuisance Channel...63Restoring a NuisanceChannel...............................63Vote Scan ....................................... 64Contact Settings..................................64Making a Group Call fromContacts..............................65Making a Private Call fromContacts ..........................66Assigning an Entry to aProgrammable NumberKey ..................................66Removing the Associationbetween Entry andProgrammable NumberKey ..................................67Adding a New Contact............. 68Setting a Default Contact .....69Call Indicator Settings.........................69Activating and DeactivatingCall Ringers for Call Alert.........................................69Activating and DeactivatingCall Ringers for PrivateCalls ................................70Activating and DeactivatingCall Ringers for SelectiveCall ..................................71Activating and DeactivatingCall Ringers for TextMessage............................. 71Activating and DeactivatingCall Ringers forContents3English
Telemetry Status withText..................................... 72Assigning Ring Styles.............. 72Escalating Alarm ToneVolume................................73Call Log Features................................73Viewing Recent Calls............... 73Deleting a Call from a CallList...................................... 74Viewing Details from a CallList...................................... 74Call Alert Operation.............................75Receiving and Respondingto a Call Alert...................... 75Making a Call Alert from theContact List......................... 75Making a Call Alert with theOne Touch AccessButton..................................76Emergency Operation.........................76Receiving an EmergencyAlarm...................................77Responding to anEmergency Alarm............... 77Exiting Emergency ModeAfter Receiving theEmergency Alarm............... 78Sending an EmergencyAlarm...................................78Sending an EmergencyAlarm with Call.................... 79Sending an EmergencyAlarm with Voice toFollow ............................. 80Reinitiating an EmergencyMode................................... 82Exiting Emergency ModeAfter Sending theEmergency Alarm............... 82Text Message Features ..................83Sending a Quick TextMessage............................. 83Sending a Quick TextMessage with the OneTouch Access Button.......... 84Accessing the Drafts Folder.....84Managing Fail-to-Send TextMessages............................85Managing Sent TextMessages............................86Receiving a Text Message.......90Managing Received TextMessages............................91Contents4English
Job Tickets..........................................94Accessing the Job TicketFolder..................................95Logging In and Out of theRemote Server....................96Creating and Sending a JobTicket.................................. 96Responding to the Job Ticket...97Deleting a Job Ticket................98Privacy ............................................99Multi-Site Controls ........................ 100Starting an Automatic SiteSearch...............................100Stopping an Automatic SiteSearch...............................101Starting a Manual SiteSearch...............................102Security.............................................103Radio Disable.........................103Radio Enable..........................104Lone Worker..................................... 106Bluetooth Operation..........................107Turning Bluetooth On andOff..................................... 107Finding and Connecting to aBluetooth Device...............108Finding and Connectingfrom a Bluetooth Device(Discoverable Mode).........109Disconnecting from aBluetooth Device...............109Switching Audio Routebetween Internal RadioSpeaker and BluetoothDevice............................... 110Viewing Device Details...........110Deleting Device Name........... 110Bluetooth Mic Gain.................111Notification List..................................111Accessing the NotificationList.................................... 112Auto-Range Transponder System(ARTS) .....................................112Over-the-Air-Programming (OTAP).. 112Wi-Fi Operation.................................113Turning Wi-Fi On or Off..........113Connecting to a NetworkAccess Point..................... 114Refreshing the Network List...114Adding a Network...................115Viewing Details of NetworkAccess Points................... 116Contents5English
Removing Network AccessPoints................................ 116Third Party Peripherals ConnectionModes.......................................... 117Utilities.............................................. 118Setting the Squelch Level...... 118Setting the Power Level......... 118Turning the Option BoardFeature(s) On or Off..........119Identifying Cable Type........... 119Turning the Voice OperatingTransmission (VOX)Feature On or Off..............120Turning the Radio Tones/Alerts On or Off................. 121Setting the Tone AlertVolume Offset Level..........121Turning the Talk PermitTone On or Off.................. 122Turning the Power Up AlertTone On or Off.................. 122Setting the Text MessageAlert Tone......................... 123Changing the Display Mode...124Adjusting the DisplayBrightness......................... 124Language............................... 125Turning Horns/Lights On orOff..................................... 126Turning the LED IndicatorOn or Off........................... 126Turning the Public AddressSystem On or Off.............. 127Turning the External PublicAddress System On orOff..................................... 127Setting Dual KnobOperation Preference........127Turning the IntroductionScreen On or Off...............128Turning the VoiceAnnouncement On or Off.. 128Setting the Text-to-SpeechFeature..............................128Call Forwarding ..................129Menu Timer............................130Analog Mic AGC (Mic AGC-A)...................................... 130Digital Mic AGC (Mic AGC-D)...................................... 131Intelligent Audio......................131Contents6English
Turning the AcousticFeedback SuppressorFeature On or Off ..........132Setting the Audio Ambience...133Setting the Audio Profiles.......134Turning GPS/GNSS On orOff..................................... 134Flexible Receive List.............. 135Accessing General RadioInformation........................ 136Keypad MicrophoneFeatures.............................140Using the Keypad..............................140Turning Keypad Tones Onor Off................................. 141Additional Advanced Features..........142Selecting a Zone by AliasSearch...............................142Initiating a Radio Check byManual Dial ...................143Initiating a Remote Monitorby Manual Dial .............. 144Making a Private Call byManual Dial ...................145Making a Phone Call byManual Dial ...................146Making a Phone Call withthe One Touch AccessButton ........................... 147Making a Group, Private orAll Call with theProgrammable NumberKey ................................149Making a Phone Call withthe ProgrammablePhone Button ................ 150Making a Phone Call fromContacts ........................152Making a Group, Private,Phone or All Call by AliasSearch .......................... 154Viewing an Entry in theScan List by Alias Search. 156Editing the Scan List.............. 157Storing an Alias or ID from aCall List............................. 160Making a Call Alert byManual Dial ...................160RSSI Values...........................161Text Messaging ............................ 161Contents7English
Writing and Sending a TextMessage........................... 162Replying to Text Messagesfrom the Inbox................... 163Editing a Quick ReplyMessage........................... 164Accessing the Drafts Folder...165Managing Fail-to-Send TextMessages..........................166Dual Tone Multi Frequency (DTMF). 168Security .........................................168Radio Disable via ManualDial....................................168Radio Enable via ManualDial....................................169Password Lock Features.................. 170Accessing the Radio fromPassword.......................... 170Unlocking the Radio fromLocked State..................... 171Turning the Password LockOn or Off........................... 171Changing the Password.........172Text Entry Configuration................... 173Word Correct..........................173Word Predict.......................... 174Sentence Cap........................ 174Viewing Custom Words..........175Editing Custom Word............. 175Adding Custom Words........... 176Deleting a Custom Word........177Deleting All Custom Words.... 178Front Panel Configuration (FPC)...... 179Entering FPC Mode................179Editing FPC ModeParameters....................... 179Connect Plus Operations............ 180Additional Radio Controlsin Connect Plus Mode...... 181Push-To-Talk (PTT) Button...............181Programmable Buttons..................... 181Assignable Radio Functions...182Assignable Settings or UtilityFunctions.......................... 183Identifying Status Indicators inConnect Plus Mode..................... 183Display Icons..........................183Call Icons............................... 185Contents8English
Advanced Menu Icons............186Sent Item Icons ..................... 186Bluetooth Device Icons.......... 186LED Indicator......................... 187Indicator Tones...................... 188Alert Tones.............................188Switching Between Connect Plusand Non-Connect Plus Modes.....188Making and Receiving Callsin Connect Plus Mode...... 190Selecting a Site.................................190Roam Request....................... 190Site Lock On/Off.....................190Site Restriction.......................190Selecting a Zone...............................191Using Multiple Networks................... 191Selecting a Call Type........................192Receiving and Responding to aRadio Call.................................... 192Receiving and Respondingto a Group Call..................192Receiving and Respondingto a Private Call.................193Receiving a Site All Call.........193Receiving an InboundPrivate Phone Call............ 194Receiving an InboundPhone Talkgroup Call....... 195Inbound Phone Multi-GroupCall....................................195Making a Radio Call..........................196Making a Call with theChannel Selector Knob..... 196Making a Private Call with aOne Touch Call Button......198Making a Call with theProgrammable ManualDial Button........................ 199Making an Outbound PrivatePhone Call with theProgrammable ManualDial Button........................ 199Making an Outbound PrivatePhone Call via the PhoneMenu................................. 200Making an Outbound PrivatePhone Call from Contacts. 201Waiting for the ChannelGrant in an OutboundPrivate Phone Call............ 202Contents9English
Making a Buffered Over-Dialin a ConnectedOutbound Private PhoneCall....................................202Making a Live Over-Dial in aConnected OutboundPrivate Phone Call............ 203Advanced Features inConnect Plus Mode.......... 204Auto Fallback.................................... 204Indications of Auto FallbackMode................................. 204Making/Receiving Calls inFallback Mode...................204Returning to NormalOperation.......................... 205Radio Check..................................... 205Sending a Radio Check......... 206Remote Monitor................................ 206Initiating Remote Monitor....... 207Scan..................................................208Starting and Stopping Scan... 208Responding to aTransmission During aScan..................................208User Configurable Scan....................209Turning Scan On or Off.....................209Editing the Scan List......................... 210Add or Delete a Group via the AddMembers Menu............................211Understanding Scan Operation.........213Scan Talkback.................................. 214Contacts Settings..............................214Making a Private Call fromContacts............................215Making a Call Alias Search.... 215Adding a New Contact........... 216Call Indicator Settings.......................217Activating and DeactivatingCall Ringers for Call Alert .217Activating and DeactivatingCall Ringers for PrivateCalls.................................. 217Activating and DeactivatingCall Ringers for TextMessage........................... 218Escalating Alarm ToneVolume..............................218Call Log Features..............................219Contents10English
Viewing Recent Calls............. 219Deleting a Call from a CallList.................................... 219Viewing Details from a CallList.................................... 220Call Alert Operation...........................220Receiving and Respondingto a Call Alert.................... 220Making a Call Alert from theContact List....................... 221Making a Call Alert with theOne Touch AccessButton................................221Emergency Operation.......................222Receiving an IncomingEmergency........................224Saving the EmergencyDetails to the Alarm List.... 224Deleting the EmergencyDetails............................... 224Responding to anEmergency Call.................225Responding to anEmergency Alert............... 225Initiating an Emergency Call.. 226Initiating an Emergency Callwith Voice to Follow.......... 226Initiating an Emergency Alert. 227Exiting Emergency Mode....... 227Text Message Features.................... 228Sending a Quick TextMessage........................... 228Sending a Quick TextMessage with the OneTouch Access Button........ 229Accessing the Drafts Folder...229Managing Fail-to-Send TextMessages..........................231Managing Sent TextMessages..........................232Receiving a Text Message.....235Reading a Text Message....... 236Managing Received TextMessages..........................236Privacy.............................................. 239Making a Privacy-Enabled(Scrambled) Call............... 240Security.............................................240Radio Disable.........................241Radio Enable..........................242Bluetooth Operation..........................243Turning Bluetooth On andOff..................................... 244Contents11English
Finding and Connecting to aBluetooth Device...............245Finding and Connectingfrom a Bluetooth Device(Discoverable Mode).........246Disconnecting from aBluetooth Device...............246Switching Audio Routebetween Internal RadioSpeaker and BluetoothDevice............................... 247Viewing Device Details...........247Deleting Device Name........... 247Bluetooth Mic Gain.................248Notification List..................................248Accessing the NotificationList.................................... 249Wi-Fi Operation.................................249Turning Wi-Fi On or Off..........249Connecting to a NetworkAccess Point..................... 250Refreshing the Network List...250Adding a Network...................251Viewing Details of NetworkAccess Points................... 252Removing Network AccessPoints................................ 252Utilities.............................................. 253Turning the Radio Tones/Alerts On or Off................. 253Setting the Tone AlertVolume Offset Level..........254Turning the Talk PermitTone On or Off.................. 254Turning the Power Up AlertTone On or Off.................. 255Setting the Power Level......... 255Changing the Display Mode...256Adjusting the DisplayBrightness......................... 257Turning the IntroductionScreen On or Off...............257Language............................... 258Turning the LED IndicatorOn or Off........................... 258Identifying Cable Type........... 259Voice Announcement.............259Menu Timer............................260Turning Horns/Lights On orOff..................................... 260Setting Dual KnobOperation Preference........261Digital Mic AGC (Mic AGC-D)...................................... 261Contents12English
Intelligent Audio......................262Turning the AcousticFeedback SuppressorFeature On or Off..............263Turning GPS/GNSS On orOff..................................... 264Accessing General RadioInformation........................ 265Accessories..................................276Authorized AccessoriesList..................................... 277Antennas...........................................277Audio.................................................279Cables...............................................280Desktop Accessories........................ 280Mounting Kits.................................... 281Speakers...........................................281Miscellaneous Accessories...............281Maritime Radio Use in the VHFFrequency Range...............................282Special Channel Assignments.....................282Emergency Channel......................... 282Non-Commercial Call Channel......... 282Operating Frequency Requirements............282Declaration of Compliance for the Use ofDistress and Safety Frequencies............285Technical Parameters for InterfacingExternal Data Sources............................285Limited Warranty....................................286MOTOROLA COMMUNICATIONPRODUCTS........................................... 286I. WHAT THIS WARRANTY COVERSAND FOR HOW LONG:......................... 286II. GENERAL PROVISIONS:....................... 287III. STATE LAW RIGHTS:............................287IV. HOW TO GET WARRANTY SERVICE:.287V. WHAT THIS WARRANTY DOES NOTCOVER:..................................................288VI. PATENT AND SOFTWAREPROVISIONS:........................................ 288VII. GOVERNING LAW:...............................290Contents13English
Declaration of ConformityThis declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below.Declaration of ConformityPer FCC CFR 47 Part 2 Section 2.1077(a)Responsible PartyName: Motorola Solutions, Inc.Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A.Phone Number: 1-800-927-2744Hereby declares that the product:Model Name: XPR 5550/XPR 5580/XPR 5550e/XPR 5580econforms to the following regulations:FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)Declaration of Conformity14English
Class B Digital DeviceAs a personal computer peripheral, this device complies with Part 15 of the FCC Rules. This device complies withIndustry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:1This device may not cause harmful interference, and2This device must accept any interference received, including interference that may cause undesired operation.Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particular in-stallation.If this equipment does cause harmful interference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio or TV technician for help.Declaration of Conformity15English
Appareil numérique de Classe BEn tant que périphérique d'ordinateur personnel, cet appareil est conforme aux stipulations de la partie 15 des rè-glements de la FCC. Cet appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. Son utilisation est assujettie aux deux conditions suivantes :1Cet appareil ne doit pas causer d'interférence nuisible.2Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant entraîner un fonction-nement indésirable.RemarqueCe matériel a fait l'objet de tests et a été déclaré conforme aux limites établies pour un appareil numériquede classe B, comme il est stipulé à la section 15 des règlements de la FCC. Ces limites sont fixées afind'offrir une protection suffisante contre des interférences nuisibles dans une installation résidentielle. Cematériel génère, utilise et peut émettre de l'énergie radiofréquence et, s'il n'est pas installé ni utilisé confor-mément aux instructions, il peut provoquer un brouillage nuisible aux communications radio. Cependant,on ne peut garantir qu'il n'y aura aucune interférence dans une installation particulière.Si cet appareil cause une interférence nuisible de la réception de la radio ou de la télévision, ce qui peutêtre déterminé en éteignant et en allumant l'appareil, vous êtes encouragé à remédier à la situation enprenant une ou plusieurs des mesures suivantes :•Réorienter ou déplacer l'antenne réceptrice.• Augmenter la distance entre l'équipement et le récepteur.• Brancher l'appareil dans une autre prise sur un circuit différent de celui du récepteur.• Consulter un revendeur ou un technicien radio/télévision chevronné pour obtenir de l'aide.Déclaration de conformitéFrançais(Canada)
Important Safety InformationRF Energy Exposure and Product Safety Guidefor Mobile Two-Way RadiosATTENTION!This radio is restricted to Occupational use only.Before using the radio, read the RF Energy Exposureand Product Safety Guide for Mobile Two-WayRadios which contains important operatinginstructions for safe usage and RF energy awarenessand control for Compliance with applicable standardsand Regulations.For a list of Motorola-approved antennas and otheraccessories, visit the following website:http://www.motorolasolutions.comAny modification to this device, not expresslyauthorized by Motorola, may void the user’s authorityto operate this device.Under Industry Canada regulations, this radiotransmitter may only operate using an antenna of atype and maximum (or lesser) gain approved for thetransmitter by Industry Canada. To reduce potentialradio interference to other users, the antenna typeand its gain should be so chosen that the equivalentisotropically radiated power (e.i.r.p.) is not more thanthat necessary for successful communication.This radio transmitter has been approved by IndustryCanada to operate with Motorola-approved antennawith the maximum permissible gain and requiredantenna impedance for each antenna type indicated.Antenna types not included in this list, having a gaingreater than the maximum gain indicated for thattype, are strictly prohibited for use with this device.Important Safety Information16English
Consignes de sécurité importantesRadios bidirectionnelles mobiles : exposition auxradiofréquences et sécurité du produitATTENTION!Cette radio ne doit être utilisée qu'à des finsprofessionnelles. Avant d'utiliser la radio, lisez leguide Radios bidirectionnelles mobiles : expositionaux radiofréquences et sécurité du produit, quicontient d'importantes instructions de fonctionnementpour une utilisation sécuritaire et des informations surl'exposition aux fréquences radioélectriques, dans lebut d’assurer votre conformité aux normes etrèglements en vigueur.Visitez le site Web suivant pour obtenir la liste desantennes et des autres accessoires approuvés parMotorola :http://www.motorolasolutions.comToute modification effectuée à cet appareil sansl'autorisation explicite de Motorola peut annulerl'autorisation d'utiliser cet appareil.Selon la réglementation d'Industrie Canada, cetémetteur radio ne peut être utilisé qu'avec uneantenne dont le type et le gain maximal (ou minimal)sont approuvés par Industrie Canada pour cetémetteur. Afin de limiter les interférences radio pourles autres utilisateurs, le type et le gain de l'antennedoivent être choisis de façon à ce que la puissanceisotrope rayonnée équivalente (P.I.R.E.) ne soit pasplus forte qu'il ne le faut pour établir lacommunication.Cet émetteur radio a été approuvé par IndustrieCanada pour utilisation avec une antenne approuvéepar Motorola offrant le gain maximal autorisé etl'impédance requise pour le type d'antenne indiqué. Ilest strictement interdit d'utiliser avec cet appareil touttype d'antenne ne figurant pas dans cette liste etprésentant un gain supérieur au maximum indiquépour le type.Consignes de sécurité importantes2English
Software VersionAll the features described in the following sections aresupported by the software version R02.50.00 or later.See Checking the Firmware Version and CodeplugVersion on page 137 to determine the softwareversion of your radio.Check with your dealer or system administrator formore details of all the features supported.Software Version17English
Version logicielleToutes les fonctions décrites dans les sectionssuivantes sont prises en charge par la versionR02.50.00 ou les versions ultérieures du logiciel de laradio.Consultez la section Checking the Firmware Versionand Codeplug Version on page 137 pour connaître laversion logicielle de votre radio.Pour obtenir davantage de renseignements à proposdes fonctions prises en charge, adressez-vous àvotre détaillant ou à votre administrateur de système.Version logicielle18English
Computer Software CopyrightsThe Motorola products described in this manual mayinclude copyrighted Motorola computer programsstored in semiconductor memories or other media.Laws in the United States and other countriespreserve for Motorola certain exclusive rights forcopyrighted computer programs including, but notlimited to, the exclusive right to copy or reproduce inany form the copyrighted computer program.Accordingly, any copyrighted Motorola computerprograms contained in the Motorola productsdescribed in this manual may not be copied,reproduced, modified, reverse-engineered, ordistributed in any manner without the express writtenpermission of Motorola. Furthermore, the purchase ofMotorola products shall not be deemed to grant eitherdirectly or by implication, estoppel, or otherwise, anylicense under the copyrights, patents or patentapplications of Motorola, except for the normal non-exclusive license to use that arises by operation oflaw in the sale of a product.The AMBE+2™ voice coding Technology embodied inthis product is protected by intellectual property rightsincluding patent rights, copyrights and trade secretsof Digital Voice Systems, Inc.This voice coding Technology is licensed solely foruse within this Communications Equipment. The userof this Technology is explicitly prohibited fromattempting to decompile, reverse engineer, ordisassemble the Object Code, or in any other wayconvert the Object Code into a human-readable form.U.S. Pat. Nos. #5,870,405, #5,826,222, #5,754,974,#5,701,390, #5,715,365, #5,649,050, #5,630,011,#5,581,656, #5,517,511, #5,491,772, #5,247,579,#5,226,084 and #5,195,166.Computer Software Copyrights19English
Getting StartedHow to Use This GuideThis User Guide covers the basic operation of theMOTOTRBO Mobiles.However, your dealer or system administrator mayhave customized your radio for your specific needs.Check with your dealer or system administrator formore information.Throughout this publication, the icons described nextare used to indicate features supported in either theconventional Analog mode or conventional Digitalmode:Indicates a conventional Analog Mode-Only feature.Indicates a conventional Digital Mode-Only feature.For features that are available in both conventionalAnalog and Digital modes, no icon is shown.Conventional Analog Mode-Only features are notavailable in Connect Plus mode of operation. See Connect Plus Operations on page 180 for moreinformation.For features that are available in a conventional multi-site mode, see IP Site Connect on page 39 for moreinformation.Selected features are also available on the single-sitetrunking mode, Capacity Plus. See Capacity Plus onpage 39 for more information.Selected features are also available in the multi-sitetrunking mode, Linked Capacity Plus. See LinkedCapacity Plus on page 40 for more information.What Your Dealer/System Administrator CanTell YouYou can consult your dealer or system administratorabout the following:• Is your radio programmed with any presetconventional channels?• Which buttons have been programmed to accessother features?• What optional accessories may suit your needs?Getting Started20English
• What are the best radio usage practices foreffective communication?• What maintenance procedures will help promotelonger radio life?Getting Started21English
Preparing Your Radio for UsePowering Up the RadioAPress the On/Off Button ( ) briefly. You seeMOTOTRBO (TM) on the display of the radiomomentarily, followed by a welcome message orwelcome image.The green LED and the Home screen lights up.A brief tone sounds, indicating that the power up testis successful.Note:There is no power up tone if the radio tones/alerts function is disabled (see Turning theRadio Tones/Alerts On or Off on page 121).If your radio does not power up, contact your dealer.Turn off the radio by pressing and holding the On/OffButton until you see Powering Down on the displayof the radio.Note:Your radio may take up to 7 seconds tocompletely turn off.Adjusting the VolumeP1AIncrease the volume by turning the Volume/ChannelKnob ( ) clockwise.Decrease the volume by turning this knobcounterclockwise.Note:Your radio can be programmed to have aminimum volume offset where the volumelevel cannot be lowered past the programmedPreparing Your Radio for Use22English
minimum volume. Check with your dealer orsystem administrator for more information.Preparing Your Radio for Use23English
Identifying Radio ControlsRadio Controls12 3 4 65910 781On/Off/Information Button2Volume/Channel Knob3Display4Menu/OK Button5Scroll Up/Down Buttons6Speaker7Return/Home Button8Front Programmable Buttons[1]9Accessory Connector10 LED IndicatorsUsing the Volume/Channel KnobThe Volume/Channel Knob can be programmed asdual purpose for both volume and channel or as avolume-only control.To adjust the volume, see Adjusting the Volume onpage 22.To change channels, push and hold the knob untilchannel selection screen is displayed, then turn theknob to the required channel.To exit the channel selection state, do one of thefollowing:• Push the Volume/Channel Knob again.•Press .•Press .• Wait for the menu timer to expire.1These buttons are programmable.Identifying Radio Controls24English
Non-Connect Plus OperationsNon-Connect Plus Operations25English
Additional Radio Controls in Non-Connect Plus ModePush-To-Talk (PTT) ButtonThe PTT button on the side of the radio ( ) servestwo basic purposes:A• While a call is in progress, the PTT button allowsthe radio to transmit to other radios in the call.Press and hold the PTT button to talk. Release thePTT button to listen.The microphone is activated when the PTT buttonis pressed.• While a call is not in progress, the PTT button isused to make a new call (see Making a Radio Callon page 47).If the Talk Permit Tone or the PTT Sidetone isenabled, wait until the short alert tone ends beforetalking. During a call, if the Channel Free Indication featureis enabled on your radio (programmed by yourdealer), you will hear a short alert tone the momentthe target radio (the radio that is receiving your call)releases the PTT button, indicating the channel isfree for you to respond. You will also hear a continuous talk prohibit tone, ifyour call is interrupted, indicating that you shouldrelease the PTT button, for example when the radioreceives an Emergency Call.Programmable ButtonsYour dealer can program the programmable buttonsas shortcuts to radio functions depending on theduration of a button press:Short press Pressing and releasing rapidly.Additional Radio Controls in Non-Connect Plus Mode26English
Long press Pressing and holding for theprogrammed duration.Press and hold Keeping the button pressed.Note:The programmed duration of a button press isapplicable for all assignable radio/utilityfunctions or settings. See EmergencyOperation on page 76 for more informationon the programmed duration of theEmergency button.Assignable Radio FunctionsAudio Ambience Allows the user to select anenvironment the radio isoperating in.Audio Profiles Allows the user to select thepreferred audio profile.Bluetooth® AudioSwitchToggles audio routingbetween internal radiospeaker and externalBluetooth-enabled accessory.Call Alert Provides direct access to thecontacts list for you to select acontact to whom a Call Alertcan be sent.Call Forwarding Toggles Call Forwarding on oroff.Call Log Selects the call log list.Contacts Provides direct access to theContacts list.Emergency Depending on theprogramming, initiates orcancels an emergency.Ext PA On/Off Toggles the audio routingbetween the connected publicaddress (PA) loudspeakeramplifier and the radio’sinternal public address (PA)system.Intelligent Audio Toggles intelligent audio on oroff.Manual Dial Depending on theprogramming, initiates aPrivate or Phone Call bykeying in any subscriber ID orphone number.Additional Radio Controls in Non-Connect Plus Mode27English
Manual SiteRoam[2] Starts the manual site search.Mic AGC On/Off Toggles the internalmicrophone automatic gaincontrol (AGC) on or off.Monitor Monitors a selected channelfor activity.Notifications Provides direct access to theNotifications list.Nuisance ChannelDelete[2]Temporarily removes anunwanted channel, except forthe Selected Channel, fromthe scan list. The SelectedChannel refers to the selectedzone or channel combinationof the user from which scan isinitiated.One Touch Access Directly initiates a predefinedPrivate, Phone or Group Call,a Call Alert or a Quick Textmessage.Option BoardFeatureToggles option boardfeature(s) on or off for optionboard-enabled channels.PA On/Off Toggles the radio’s internalpublic address (PA) system onor off.PermanentMonitorMonitors a selected channelfor all radio traffic until functionis disabled.Phone Provides direct access to thePhone Contacts list.Privacy Toggles privacy on or off.Radio Alias and ID Provides radio alias and ID.Radio Check Determines if a radio is activein a system.Radio Enable Allows a target radio to beremotely enabled.Radio Disable Allows a target radio to beremotely disabled.Additional Radio Controls in Non-Connect Plus Mode28English
Remote Monitor Turns on the microphone of atarget radio without it givingany indicators.Repeater/Talkaround[2]Toggles between using arepeater and communicatingdirectly with another radio.Scan[2] Toggles scan on or off.Site Info Displays current LinkedCapacity Plus site name andID. Plays site announcementvoice messages for thecurrent site (this function isunavailable when VoiceAnnouncement is disabled).Site Lock On/Off[2] When toggled on, the radiosearches the current site only.When toggled off, the radiosearches other sites inaddition to the current site.Telemetry Control Controls the Output Pin on alocal or remote radio.Text Message Selects the text messagemenu.Transmit InterruptRemote Dekey Stops the transmission of aremote monitored radiowithout giving any indicators,or an ongoing interruptible callto free the channel.Trill EnhancementOn/OffToggles trill enhancement onor off.VoiceAnnouncement forChannelPlays zone and channelannouncement voicemessages for the currentchannel. This function isunavailable when VoiceAnnouncement is disabled.VoiceAnnouncementOn/OffToggles voice announcementon or off.Voice OperatingTransmission(VOX)Toggles VOX on or off.Zone Allows selection from a list ofzones.Additional Radio Controls in Non-Connect Plus Mode29English
Assignable Settings or Utility FunctionsAll Tones/AlertsToggles all tones and alerts on oroff.Backlight Toggles display backlight on oroff.Channel Up/DownDepending on the programming,changes channel to previous ornext channel.Display Mode Toggles the day/night displaymode on or off.Power Level Toggles transmit power levelbetween high and low.Squelch Toggles squelch level betweentight and normal.Accessing the Programmed FunctionsYou can access various radio functions through oneof the following ways:• A short or long press of the relevantprogrammable buttons.• Use the Menu Navigation Buttons as follows:1Press to access the menu. Press theappropriate Menu Scroll button ( or ) toaccess the menu functions.2To select a function or enter a sub-menu, pressthe button.3To go back one menu level, or to return to theprevious screen, press the button. Longpress the button to return to the Homescreen.Note:The Menu Navigation Buttons are alsoavailable on a keypad microphone (see Keypad Microphone Features on page140).2Not applicable in Capacity Plus and Linked Capacity PlusAdditional Radio Controls in Non-Connect Plus Mode30English
Note:Your radio automatically exits the menuafter a period of inactivity and returns toyour Home screen.Identifying Status IndicatorsDisplay IconsThe liquid crystal display (LCD) of your radio showsradio status, text entries, and menu entries.The following are icons that appear on the display ofthe radio. Icons are displayed on the status bar,arranged left-most in order of appearance/usage andare channel specific.Received Signal Strength Indicator(RSSI)The number of bars displayed repre-sents the radio signal strength. Fourbars indicate the strongest signal. Thisicon is only displayed while receiving.MonitorSelected channel is being monitored.BluetoothThe Bluetooth feature is enabled butthere is no remote Bluetooth device con-nected.Bluetooth ConnectedThe Bluetooth feature is enabled. Theicon stays lit when a remote Bluetoothdevice is connected.Sign InRadio is signed in to the remote server.Sign OutRadio is signed out of the remote server.Job Ticket NotificationNotification List has items to review. or Power LevelAdditional Radio Controls in Non-Connect Plus Mode31English
Radio is set at Low power or Radio isset at High power.Tones DisableTones are turned off.Option BoardThe Option Board is enabled.Option Board Non-FunctionThe Option Board is disabled.Over-the-Air Programming Delay Tim-erIndicates time left before automatic re-start of radio.GPS/GNSS Available The GPS/GNSS feature is enabled. Theicon stays lit when a position fix is avail-able.GPS/GNSS Not Available/Out ofRange The GPS/GNSS feature is enabled butis not receiving data from the satellite.Scan[3][4]Scan feature is enabled.Scan- Priority 1[3][4]Radio detects activity on channel/groupdesignated as Priority 1.Scan- Priority 2[3][4]Radio detects activity on channel/groupdesignated as Priority 2.Vote ScanVote scan feature is enabled.Flexible Receive ListFlexible receive list is enabled.Additional Radio Controls in Non-Connect Plus Mode32English
EmergencyRadio is in Emergency mode.SecureThe Privacy feature is enabled.UnsecureThe Privacy feature is disabled.Site Roaming[3]The site roaming feature is enabled.Talkaround[3][4]In the absence of a repeater, radio iscurrently configured for direct radio to ra-dio communication.Wi-Fi Excellent[5]Wi-Fi signal is excellent.Wi-Fi Good[5]Wi-Fi signal is good.Wi-Fi Average[5]Wi-Fi signal is average.Wi-Fi Poor[5]Wi-Fi signal is poor.Wi-Fi Unavailable[5]Wi-Fi signal is unavailable.3Not applicable in Capacity Plus4Not applicable in Linked Capacity Plus5Only applicable for XPR 5550e/XPR 5580eAdditional Radio Controls in Non-Connect Plus Mode33English
Call IconsThe following icons appear on the radio’s displayduring a call. These icons also appear in the Contactslist to indicate ID type.Private CallIndicates a Private Call in progress. Inthe Contacts list, it indicates a sub-scriber alias (name) or ID (number).Group Call/All CallIndicates a Group Call or All Call inprogress. In the Contacts list, it indi-cates a group alias (name) or ID(number).Phone Call as Private CallIndicates a Phone Call as Private Callin progress. In the Contacts list, it indi-cates a phone alias (name) or ID(number).Phone Call as Group/All CallIndicates a Phone Call as Group/AllCall in progress. In the Contacts list, itindicates a group alias (name) or ID(number).Bluetooth PC CallIndicates a Bluetooth PC Call in prog-ress. In the Contacts list, it indicates aBluetooth PC Call alias (name) or ID(number).Advanced Menu IconsThe following icons appear beside menu items thatoffer a choice between two options or as an indicationthat there is a sub-menu offering two options.Checkbox (Empty)Indicates the option is not selected.Checkbox (Checked)Indicates the option is selected.Solid Black BoxAdditional Radio Controls in Non-Connect Plus Mode34English
Indicates the option selected for the menuitem with a sub-menu.Mini Notice IconsThe following icons appear momentarily on theradio’s display after an action to perform task istaken.Successful Transmission (Posi-tive)Successful action taken.Failed Transmission (Negative)Failed action taken.Transmission in Progress (Transi-tional)Transmitting. This is seen before indi-cation for Successful Transmission orFailed Transmission.Sent Item Icons The following icons appear at the top right corner ofthe radio’s display in the Sent Items folder.ORSent SuccessfullyThe text message is sent successfully.ORSend FailedThe text message has not been sent.ORIn-Progress• The text message to a group alias or IDis pending transmission.• The text message to a subscriber aliasor ID is pending transmission, followedby waiting for acknowledgement.Additional Radio Controls in Non-Connect Plus Mode35English
Bluetooth Device IconsThe following icons also appear next to items in thelist of Bluetooth-enabled devices available to indicatethe device type.Bluetooth Data DeviceBluetooth-enabled data device, suchas a scanner.Bluetooth Audio DeviceBluetooth-enabled audio device,such as a headset.Bluetooth PTT DeviceBluetooth-enabled PTT device, suchas a PTT-Only Device (POD).Job Tickets IconsAll JobsIndicates all jobs listed.New JobsIndicates new jobs.LED IndicatorThe LED indicator ( ) shows the operational status ofyour radio.ABlinkingredRadio is transmitting at low batterycondition, receiving or sending anemergency transmission, has failedthe self-test upon powering up, or hasmoved out of range if radio isconfigured with Auto-RangeTransponder System.Additional Radio Controls in Non-Connect Plus Mode36English
SolidyellowRadio is monitoring a conventionalchannel or in Bluetooth DiscoverableMode.BlinkingyellowRadio is scanning for activity orreceiving a Call Alert, flexible receivelist is enabled or all local LinkedCapacity Plus channels are busy.DoubleblinkingyellowRadio is no longer connected to therepeater while in Capacity Plus orLinked Capacity Plus; all CapacityPlus or Linked Capacity Plus channelsare currently busy.Solid green Radio is powering up or transmitting.BlinkinggreenRadio is powering up, receiving a non-privacy-enabled call or data, ordetecting activity, or retrieving Over-the-Air Programming transmissionsover the air.DoubleblinkinggreenRadio is receiving a privacy-enabledcall or data.Note:While in conventional mode, when the LEDblinks green, it indicates the radio detectsactivity over the air. Due to the nature of thedigital protocol, this activity may or may notaffect the radio's programmed channel.For Capacity Plus and Linked Capacity Plus,there is no LED indication when the radio isdetecting activity over the air.Alert TonesAlert tones provide you with audible indications of thestatus, or response to data received on the radio.Continuous Tone A monotone sound.Sounds continuously un-til termination.Periodic Tone Sounds periodically de-pending on the durationset by the radio. Tonestarts, stops, and repeatsitself.Repetitive Tone A single tone that re-peats itself until it is ter-minated by the user.Additional Radio Controls in Non-Connect Plus Mode37English
Momentary Tone Sounds only once for ashort period of time de-fined by the radio.Indicator TonesHigh pitched tone Low pitched tonePositive Indicator ToneNegative Indicator ToneSwitching Between Conventional Analog andDigital ModeEach channel in your radio can be configured as aconventional analog or conventional digital channel.To switch between an analog or a digital channel, usethe•Scroll Up/Down ( ) buttons.•Volume/Channel Knob ( ).• Programmed Channel Up or Channel Downbuttons.ABWhen switching from digital to analog mode, certainfeatures are unavailable. Icons for the digital features(such as Messages) reflect this change by appearing‘grayed out’. Disabled features are hidden in themenu.Your radio also has features available in both analogand digital mode. However, the minor differences inthe way each feature works does not affect theperformance of your radio.Note:Your radio also switches between digital andanalog modes during a dual mode scan (see Scan on page 62).To use the Scroll Up/Down buttons, while inthe Home Screen of the required Zone, press or to select the required channel.Additional Radio Controls in Non-Connect Plus Mode38English
To use the programmed Channel Up orChannel Down buttons, while in the HomeScreen of the required Zone, press ChannelUp or Channel Down to select the requiredchannel.IP Site Connect This feature allows your radio to extend conventionalcommunication beyond the reach of a single site, byconnecting to different available sites which areconnected via an Internet Protocol (IP) network.When the radio moves out of range from one site andinto the range of another, it connects to the new site'srepeater to send or receive calls/data transmissions.Depending on your settings, this is doneautomatically or manually.If the radio is set to do this automatically, it scansthrough all available sites when the signal from thecurrent site is weak or when the radio is unable todetect any signal from the current site. It then lockson to the repeater with the strongest Received SignalStrength Indicator (RSSI) value.In a manual site search, the radio searches for thenext site in the roam list that is currently in range (butwhich may not have the strongest signal) and lockson to it.Note:Each channel can only have either Scan orRoam enabled, not both at the same time.Channels with this feature enabled can be added to aparticular roam list. The radio searches the channel(s)in the roam list during the automatic roam operationto locate the best site.A roam list supports a maximum of 16 channels(including the Selected Channel).Note:You cannot manually add or delete an entry tothe roam list. Check with your dealer orsystem administrator for more information.Capacity Plus Capacity Plus is a single-site trunking configuration ofthe MOTOTRBO radio system, which uses a pool ofchannels to support hundreds of users and up to 254Groups. This feature allows your radio to efficientlyutilize the available number of programmed channelswhile in Repeater Mode.Additional Radio Controls in Non-Connect Plus Mode39English
You hear a negative indicator tone if you try to accessa feature not applicable to Capacity Plus via aprogrammable button press.Your radio also has features that are available inconventional digital mode, IP Site Connect, CapacityPlus and Linked Capacity Plus. However, the minordifferences in the way each feature works does notaffect the performance of your radio.Check with your dealer or system administrator formore information on this configuration.Linked Capacity Plus Linked Capacity Plus is a multi-site multi-channeltrunking configuration of the MOTOTRBO radiosystem, combining the best of both Capacity Plus andIP Site Connect configurations.Linked Capacity Plus allows your radio to extendtrunking communication beyond the reach of a singlesite, by connecting to different available sites whichare connected via an Internet Protocol (IP) network. Italso provides an increase in capacity by efficientlyutilizing the combined available number ofprogrammed channels supported by each of theavailable sites.When the radio moves out of range from one site andinto the range of another, it connects to the new site'srepeater to send or receive calls/data transmissions.Depending on your settings, this is doneautomatically or manually.If the radio is set to do this automatically, it scansthrough all available sites when the signal from thecurrent site is weak or when the radio is unable todetect any signal from the current site. It then lockson to the repeater with the strongest Received SignalStrength Indicator (RSSI) value.In a manual site search, the radio searches for thenext site in the roam list that is currently in range (butwhich may not have the strongest signal) and lockson to it.Any channel with Linked Capacity Plus enabled canbe added to a particular roam list. The radio searchesthese channels during the automatic roam operationto locate the best site.Note:You cannot manually add or delete an entry tothe roam list. Check with your dealer orsystem administrator for more information.Additional Radio Controls in Non-Connect Plus Mode40English
Similar to Capacity Plus, icons of features notapplicable to Linked Capacity Plus are not availablein the menu. You hear a negative indicator tone if youtry to access a feature not applicable to LinkedCapacity Plus via a programmable button press.Check with your dealer or system administrator formore information on this configuration.Additional Radio Controls in Non-Connect Plus Mode41English
Making and Receiving Calls in Non-Connect Plus ModeSelecting a ZoneA zone is a group of channels. Your radio supports upto 99 channels and 2 zones, with a maximum of 99channels per zone.1Access the Zone feature.Radio Con-trolsStepsProgrammedZone buttonPress the programmed Zonebutton.Radio menu 1 to access the menu.2 or to Zone andpress to select.The current zone is displayed and indicated by a.2Select the required zone.Radio Control Steps or or and scroll to therequired zone.3Press to select.The display shows <Zone> Selectedmomentarily and returns to the selected zonescreen.Selecting a ChannelTransmissions are sent and received on a channel.Depending on your radio’s configuration, eachchannel may have been programmed differently tosupport different groups of users or supplied withdifferent features.Select a channel by using:•Scroll Up or Scroll Down buttons.•Volume/Channel Knob.• The programmed Channel Up or ChannelDown buttons.Making and Receiving Calls in Non-Connect Plus Mode42English
Receiving and Responding to a Radio CallOnce the channel, subscriber ID, or group ID isdisplayed, you can proceed to receive and respond tocalls.The LED lights up solid green while the radio istransmitting and blinks green when the radio isreceiving.Note:The LED lights up solid green while the radiois transmitting and double blinks green whenthe radio is receiving a privacy-enabled call.To unscramble a privacy-enabled call, yourradio must have the same Privacy Key, ORthe same Key Value and Key ID (programmedby your dealer), as the transmitting radio (theradio you are receiving the call from).See Privacy on page 99 for moreinformation.Receiving and Responding to a Group CallTo receive a call from a group of users, your radiomust be configured as part of that group.When you receive a Group Call (while on the Homescreen), the LED blinks green. The Group Call iconappears in the top right corner. The first text lineshows the caller alias. The second text line displaysthe group call alias. Your radio unmutes and theincoming call sounds through the radio's speaker.1Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.• If the Channel Free Indication feature isenabled, you hear a short alert tone themoment the transmitting radio releases thePTT button, indicating the channel is free foryou to respond. Press the PTT button torespond.• If the Voice Interrupt feature is enabled,press the PTT button to stop the current callfrom the transmitting radio and free the channelfor you to talk/respond.The LED lights up solid green.2Wait for one of the following tones to finish (ifenabled), and speak clearly into the microphone.• The Talk Permit ToneMaking and Receiving Calls in Non-Connect Plus Mode43English
•The PTT Sidetone 3Release the PTT button to listen.If there is no voice activity for a predetermined periodof time, the call ends.Note:See Making a Group Call on page 48 fordetails on making a Group Call.Receiving and Responding to a Private Call A Private Call is a call from an individual radio toanother individual radio.Your radio unmutes and the incoming call soundsthrough the speaker of the radio.1Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.• If the Channel Free Indication feature isenabled, you hear a short alert tone themoment the transmitting radio releases thePTT button, indicating the channel is free foryou to respond. Press the PTT button torespond.• If the Voice Interrupt feature is enabled,press the PTT button to stop the current callfrom the transmitting radio and free the channelfor you to talk/respond.The LED lights up solid green.2Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.3Release the PTT button to listen.If there is no voice activity for a predetermined periodof time, the call ends.See Making a Private Call on page 49 for details onmaking a Private Call.Receiving an All CallAn All Call is a call from an individual radio to everyradio on the channel. It is used to make importantannouncements requiring the user’s full attention.When you receive an All Call, a tone sounds and theLED blinks green.The Group Call icon appears in the top right corner.The first text line shows the caller alias. The secondMaking and Receiving Calls in Non-Connect Plus Mode44English
text line displays All Call. Your radio unmutes andthe incoming call sounds through the radio speaker.Once the All Call ends, the radio returns to theprevious screen before receiving the call. An All Calldoes not wait for a predetermined time before ending. If the Channel Free Indication feature is enabled,you hear a short alert tone the moment thetransmitting radio releases the PTT button, indicatingthe channel is now available for use.You cannot respond to an All Call.Note:See Making an All Call on page 50 fordetails on making an All Call.Note:The radio stops receiving the All Call if youswitch to a different channel while receivingthe call. During an All Call, you will not be ableto use any programmed button functions untilthe call ends.Receiving and Responding to a Selective Call A Selective Call is a call from an individual radio toanother individual radio. It is a Private Call on ananalog system.When you receive a Selective Call, the LED blinksgreen. The Private Call icon appears in the top rightcorner. The first text line shows the caller alias orSelective Call or Alert with Call. The first textline shows the Private Call icon. The radio displaysSelective Call or Alert with Call. Your radiounmutes and the incoming call sounds through theradio's speaker.1Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.2Press the PTT button to respond to the call.The LED lights up solid green.3Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.4Release the PTT button to listen.If there is no voice activity for a predetermined periodof time, the call ends.You hear a short tone. The display shows CallEnded.See Making a Private Call on page 49 for details onmaking a Private Call.Making and Receiving Calls in Non-Connect Plus Mode45English
Receiving and Responding to a Phone Call Note:If Phone Call capability is enabled, you areable to respond to a Phone Call. Check withyour dealer or system administrator for moreinformation.Phone Call as Private CallWhen you receive a Phone Call as a Private Call, thePhone Call icon appears in the top right corner; thedisplay shows the caller alias or Phone Call.If Phone Call capability is not enabled on your radio,the first line of the display shows Unavailable andyour radio mutes the call. Your radio returns to theprevious screen when the call ends.1Press the PTT button to talk and release it tolisten.2Press to end the call.The display shows Ending Phone Call.If successful, a tone sounds and the display showsCall Ended.If successful, a tone sounds and the display showsCall Ended.If unsuccessful, your radio returns to the PhoneCall screen. Repeat this step or wait for thetelephone user to end the call.Phone Call as Group CallWhen you receive a Phone Call as a Group Call, thePhone Group Call icon appears in the top rightcorner; the display shows the group alias and PhoneCall.If Phone Call capability is not enabled on your radio,the display shows Unavailable and your radiomutes the call. Your radio returns to the previousscreen when the call ends.1Press the PTT button to talk and release it tolisten.2Press to end the call.The display shows Ending Phone Call.If successful, a tone sounds and the display showsCall Ended.Making and Receiving Calls in Non-Connect Plus Mode46English
If unsuccessful, your radio returns to the PhoneCall screen. Repeat this step to end the call.Phone Call as All CallWhen you receive a Phone Call as an All Call, thePhone Call icon appears in the top right corner; thedisplay shows All Call and Phone Call.If Phone Call capability is not enabled on your radio,the display shows Unavailable and your radiomutes the call. Your radio returns to the previousscreen when the call ends.Note:When you receive a Phone Call as an All Call,you can respond to the call or end the call,only if an All Call type is assigned to thechannel.1Press the PTT button to talk and release it tolisten.2Press to end the call.The display shows Ending Phone Call.If successful, a tone sounds and the display showsAll Call and Call Ended.If unsuccessful, your radio returns to the PhoneCall screen. Repeat this step to end the call.Making a Radio CallAfter selecting your channel, you can select asubscriber alias or ID, or group alias or ID by using:• A programmed One Touch Access button – TheOne Touch Access feature allows you to make aGroup or Private Call to a predefined ID easily.This feature can be assigned to a short or longprogrammable button press. You can ONLY haveone ID assigned to a One Touch Access button.Your radio can have multiple One Touch Accessbuttons programmed.• The programmed number keys – This method isfor Group, Private and All Calls only and is usedwith the keypad (see Making a Group, Private orAll Call with the Programmable Number Key onpage 53).• The Contacts list (see Contact Settings on page64). • Manual Dial – This method is for Private andPhone Calls only and is dialed using the keypad(see Making a Private Call by Manual Dial on pageMaking and Receiving Calls in Non-Connect Plus Mode47English
145, and Making a Phone Call by Manual Dial onpage 146). Note:Your radio must have the Privacy featureenabled on the channel to send a privacy-enabled transmission. Only target radios withthe same Privacy Key OR the same Key Valueand Key ID as your radio will be able tounscramble the transmission.Note:See Privacy on page 99 for moreinformation.Making a Group CallTo make a call to a group of users, your radio mustbe configured as part of that group.1Do one of the following.• Select the channel with the active group aliasor ID. See Selecting a Channel on page 42.• Press the programmed One Touch Accessbutton.2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press the PTT button to make the call.The LED lights up solid green. The Group Callicon appears in the top right corner. The first textline shows the group call alias.4Release the PTT button to listen.When the target radio responds, the LED blinksgreen. You see the Group Call icon, the groupalias or ID, and transmitting radio alias or ID onyour display.5 If the Channel Free Indication feature isenabled, you hear a short alert tone the momentthe transmitting radio releases the PTT button,indicating the channel is free for you to respond.Press the PTT button to respond.If there is no voice activity for a predeterminedperiod of time, the call ends. Radio returns to thescreen you were on prior to initiating the call.Note:You can also make a Group Call via Contacts(see Making a Group Call from Contacts onpage 65).Making and Receiving Calls in Non-Connect Plus Mode48English
Making a Private Call While you can receive and/or respond to a PrivateCall initiated by an authorized individual radio, yourradio must be programmed for you to initiate a PrivateCall.There are two types of Private Calls. The first type,where a radio presence check is performed prior tosetting up the call, while the other sets up the callimmediately.Only one of these call types can be programmed toyour radio by your dealer.You will hear a negative indicator tone, when youmake a Private Call via the Menu, One TouchAccess button, the programmed number keys, or theVolume/Channel Selector Knob, if this feature is notenabled.Use the Text Message or Call Alert features tocontact an individual radio. See Text MessageFeatures on page 83 or Call Alert Operation onpage 75 for more information.1Do one of the following.• Select the channel with the active subscriberalias or ID. See Selecting a Channel on page42.• Press the programmed One Touch Accessbutton.2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press the PTT button to make the call.The LED lights up solid green. The Private Callicon appears on the top right corner. The first textline shows the subscriber alias. The second textline displays the call status.4Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.5Release the PTT button to listen.When the target radio responds, the LED blinksgreen.6 If the Channel Free Indication feature isenabled, you hear a short alert tone the momentthe transmitting radio releases the PTT button,indicating the channel is free for you to respond.Press the PTT button to respond.Making and Receiving Calls in Non-Connect Plus Mode49English
If there is no voice activity for a predeterminedperiod of time, the call ends. You hear a shorttone. The display shows Call Ended.You can also make a Private Call via Contacts (see Making a Private Call from Contacts on page 66).Making an All CallThis feature allows you to transmit to all users on thechannel. Your radio must be programmed to allowyou to use this feature.Users on the channel cannot respond to an All Call.1Select the channel with the active All Call groupalias or ID. See Selecting a Channel on page 42.2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press the PTT button to make the call.The LED lights up solid green.The Group Call iconappears in the top right corner. The first text lineshows All Call.4Wait for one of the following tones to finish (ifenabled), and speak clearly into the microphone.• The Talk Permit Tone•The PTT Sidetone Making a Selective Call Just like a Private Call, while you can receive and/orrespond to a Selective Call initiated by an authorizedindividual radio, your radio must be programmed foryou to initiate a Selective Call.1Select the channel with the active subscriber aliasor ID. See Selecting a Channel on page 42.2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press the PTT button to make the call.The LED lights up solid green. The Private Callicon appears in the top right corner. The first textline shows the subscriber alias. The second textline displays the call status.4Wait for one of the following tones to finish (ifenabled), and speak clearly into the microphone.• The Talk Permit Tone•The PTT Sidetone Making and Receiving Calls in Non-Connect Plus Mode50English
5Release the PTT button to listen.When the target radio responds, the LED blinksgreen. If the Channel Free Indication feature isenabled, you hear a short alert tone the momentthe transmitting radio releases the PTT button,indicating the channel is free for you to respond.Press the PTT button to respond.If there is no voice activity for a predeterminedperiod of time, the call ends.The display shows Call Ended.Making a Phone Call1Press the programmed One Touch Accessbutton to make a Phone Call to the predefinedalias or ID.If the entry for the One Touch Access button isempty, a negative indicator tone sounds. If theaccess code was not preconfigured in theContacts list, the display shows Access Code:.Enter the access code and press to proceed.The LED lights up solid green. The Phone Callicon appears in the top right corner. The first textline shows the subscriber alias. The second textline displays the call status.If the call-setup is successful, the DTMF tonesounds. You hear the dialing tone of the telephoneuser. The first text line shows the subscriber alias.The Phone Call icon remains in the top rightcorner.If the call-setup is unsuccessful, a tone soundsand the display shows Phone Call Failed. Yourradio returns to the Access Code input screen. Ifthe access code was preconfigured in theContacts list, the radio returns to the screen youwere on prior to initiating the call.2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press the PTT button to talk and release it tolisten.To enter extra digits, if requested by the PhoneCall, enter the extra digits using the keypad andpress to proceed.Making and Receiving Calls in Non-Connect Plus Mode51English
The DTMF tone sounds with each keypad press,and the radio returns to the previous screen.4Press to end the call.If de-access code was not preconfigured in theContacts list, the display shows De-AccessCode:. Do one of the following.•Enter the de-access code and press toproceed. The radio returns to the previousscreen.• Press the One Touch Access button. If theentry for the One Touch Access button isempty, a negative indicator tone sounds.The DTMF tone sounds with each keypad press,and the display shows Ending Phone Call.If the end-call-setup is successful, a tone soundsand the display shows Call Ended.If the end-call-setup is unsuccessful, your radioreturns to the Phone Call screen. Repeat Step 4 orwait for the telephone user to end the call.Note:When the telephone user ends the call, atone sounds and the display shows CallEnded.If the call ends while you are entering theextra digits requested by the Phone Call,your radio returns to the screen you wereon prior to initiating the call.During channel access, press todismiss the call attempt. A tone sounds toindicate success.During the call, if you press the One TouchAccess button with the deaccess codepreconfigured or enter the deaccess codeas the input for extra digits, your radioattempts to end the call.The access or deaccess code cannot bemore than 10 characters.Making a Private Call with a One Touch Call ButtonNote:Programmable buttons press must be initiatedfrom the Home screen.Making and Receiving Calls in Non-Connect Plus Mode52English
The One Touch Call feature allows you to easilymake a Private Call to a pre-defined Private Call aliasor ID. This feature can be assigned to a short or longprogrammable button press.You can ONLY have one alias or ID assigned to aOne Touch Call button. Your radio can have multipleOne Touch Call buttons programmed.1Press the programmed One Touch Call button tomake a Private Call to the pre-defined Private Callalias or ID.2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press the PTT button to make the call.The LED lights up solid green.The display shows the Private Call alias or ID.4Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.5Release the PTT button to listen.When the target radio responds, the LED blinksgreen.6If the Channel Free Indication feature is enabled,you will hear a short alert tone the moment thetarget radio releases the PTT button, indicating thechannel is free for you to respond. Press the PTTbutton to respond.If there is no voice activity for a predeterminedperiod of time, the call ends.Making a Group, Private or All Call with theProgrammable Number KeyThe Programmable Number Key feature allows you tomake a Group, Private or All Call to a predefined aliasor ID easily. This feature can be assigned to all theavailable number keys on a keypad.You can ONLY have one alias or ID assigned to anumber key, but you can have more than one numberkey associated to an alias or ID.1Long press the programmed number key, whenyou are on the Home screen, to make a Group,Private or All Call to the predefined alias or ID.If the number key is not associated to an entry, anegative indicator tone sounds.Making and Receiving Calls in Non-Connect Plus Mode53English
2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press the PTT button to make the call.The LED lights up solid green.4Release the PTT button to listen.When the target radio responds, the LED blinksgreen.5 If the Channel Free Indication feature isenabled, you hear a short alert tone the momentthe transmitting radio releases the PTT button,indicating the channel is free for you to respond.Press the PTT button to respond.If there is no voice activity for a predeterminedperiod of time, the call ends. Radio returns to thescreen you were on prior to initiating the call.For a Private Call, you hear a short tone when thecall ends.See Assigning an Entry to a ProgrammableNumber Key on page 66 for details on assigningan entry to a number key on the keypad.Stopping a Radio Call This feature allows you to stop an ongoing Group orPrivate Call to free the channel for transmission. Forexample, when a radio experiences a “stuckmicrophone” condition where the PTT button isinadvertently pressed by the user.Your radio must be programmed to allow you to usethis feature.1Press the programmed Transmit InterruptRemote Dekey button, while on the relevantchannel.The display shows Remote Dekey.2Wait for acknowledgement.If successful, the radio sounds a positive indicatortone and the display shows Remote DekeySuccess, indicating that the channel is now free.If unsuccessful, the radio sounds a negativeindicator tone and the display shows RemoteDekey Failed.Making and Receiving Calls in Non-Connect Plus Mode54English
TalkaroundYou can continue to communicate when yourrepeater is not operating, or when your radio is out ofthe repeater’s range but within talking range of otherradios.This is called “talkaround”.Note:This feature is not applicable in Capacity Plusand Linked Capacity Plus.The Talkaround setting is retained even afterpowering down.You can toggle between talkaround and repeatermodes by pressing the programmed Repeater/Talkaround button or using the radio menu asdescribed next.Note:This feature is not applicable in Citizens Bandchannels that are in the same frequency.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Talkaround and press toselect.5Press to enable/disable the Talkaround.The display shows beside Enabled.The disappears from beside Enabled.Making and Receiving Calls in Non-Connect Plus Mode55English
Advanced Features in Non-ConnectPlus ModeRadio CheckIf enabled, this feature allows you to determine ifanother radio is active in a system without disturbingthe user of that radio. No audible or visual notificationis shown on the target radio.This feature is only applicable for subscriber aliasesor IDs.Sending a Radio Check1Access the Radio Check feature.RadioControlStepsPro-gram-med Ra-dioCheckbutton1Press the programmed RadioCheck button.2 or to the required sub-scriber alias or ID and press to select.RadioControlStepsMenu 1 to access the menu.2 or to Contacts andpress to select.3Use one of the steps describednext to select the required sub-scriber alias or ID:• Select the subscriber alias or IDdirectly.• or to the re-quired subscriber alias or IDand press to select.•Use the Manual Dial menu.• or to ManualDial and press to se-lect.Advanced Features in Non-Connect Plus Mode56English
RadioControlSteps• or to RadioNumber and press toselect.• If there was previously dialedID, the ID appears along witha blinking cursor. Else, thefirst line of the display showsRadio Number:; the secondline of the display shows ablinking cursor. Use the key-pad to edit/enter the ID, andpress to select.4 or to the required sub-scriber alias or ID and press to select.5 or to Radio Check andpress to select.The display shows transitional mini notice,indicating the request is in progress. The LEDlights up solid green.2Wait for acknowledgement.If the button is pressed when the radio iswaiting for acknowledgement, a tone sounds, andthe radio terminates all retries and exits RadioCheck mode.If Radio Check is successful, a positive indicatortone sounds and the display shows positive mininotice.If Radio Check is unsuccessful, a negativeindicator tone sounds and the display showsnegative mini notice.Radio returns to the subscriber alias or ID screen.Remote MonitorUse the Remote Monitor feature to turn on themicrophone of a target radio (subscriber alias or IDsonly). The green LED will blink once on the targetsubscriber. You can use this feature to monitor,Advanced Features in Non-Connect Plus Mode57English
remotely, any audible activity surrounding the targetradio.Your radio must be programmed to allow you to usethis feature.Initiating Remote Monitor1Access the Remote Monitor feature.RadioControlStepsProgram-med Re-mote Mon-itor Button1Press the programmed RemoteMonitor button.2 or to the requiredsubscriber alias or ID and press to select.Menu 1 to access the menu2 or to Contacts andpress to selectRadioControlSteps3 or to the requiredsubscriber alias or ID and press to select.4 or to Remote Mon.and press to select.The display shows transitional mini notice,indicating the request is in progress. The LEDlights up solid green.2Wait for acknowledgement.If successful, a positive indicator tone sounds andthe display shows positive mini notice. Your radiostarts playing audio from the monitored radio for aprogrammed duration and display shows Rem.Monitor. Once the timer expires, the radio soundsan alert tone and the LED turns off.Advanced Features in Non-Connect Plus Mode58English
If unsuccessful, the radio sounds a negativeindicator tone the display shows negative mininotice.Stopping Remote MonitorRemote Monitor automatically stops after aprogrammed duration or when there is any useroperation on the target radio. Follow the steps belowto manually stop Remote Monitor.1Press the programmed Transmit InterruptRemote Dekey button.The display shows transitional mini notice,indicating the request is in progress. The LEDlights up solid green.2Wait for acknowledgement.If successful, the radio sounds a positive indicatortone and the display shows positive mini notice.If unsuccessful, the radio sounds a negativeindicator tone and the display shows negative mininotice.Scan ListsScan lists are created and assigned to individualchannels/groups. Your radio scans for voice activityby cycling through the channel/group sequencespecified in the scan list for the current channel/group.Your radio can support up to 250 scan lists, with amaximum of 16 members in a list. Each scan listsupports a mixture of both analog and digital entries.You can add, delete, or prioritize channels by editinga scan list.You can attach a new scan list to your radio via FrontPanel Programming.Note:This feature is not applicable in Capacity Plusand Linked Capacity Plus.Viewing an Entry in the Scan List1 to access the menu.2 or to Scan and press to select.Advanced Features in Non-Connect Plus Mode59English
3 or to Scan List and press toselect.4Use or to view each member on thelist.The Priority icon appears left of the member’salias, if set, to indicate whether the member is ona Priority 1 or Priority 2 channel list. You cannothave multiple Priority 1 or Priority 2 channels in ascan list.There is no Priority icon if priority is set to None.Editing the Scan ListAdding a New Entry to the Scan List1 to access the menu.2 or to Scan and press to select.3 or to Scan List and press toselect.4 or to Add Member and press toselect.5 or to the required alias or ID.6Press to select.7 or to the required priority level andpress to select.The display shows positive mini notice, followedimmediately by Add Another?.8Do one of the following:• or to Yes and press to select,and repeat Steps 5 to 7.• or to No and press to savethe current list.Deleting an Entry from the Scan List1 to access the menu.Advanced Features in Non-Connect Plus Mode60English
2 or to Scan and press to select.3 or to Scan List and press toselect.4 or to the required alias or ID.5Press to select.6 or to Delete and press toselect.7Do one of the following:• or to Yes and press to deleteentry. The display shows positive mini notice.• or to No and press to returnto the previous screen.8Repeat Steps 4 to 6 to delete other entries.After deleting all required aliases or IDs, longpress to return to the Home screen.Setting and Editing Priority for an Entry in theScan List1 to access the menu.2 or to Scan and press to select.3 or to Scan List and press toselect.4 or to the required alias or ID.5Press to select.6 or to Edit Priority and press to select.7 or to the required priority level andpress to select.The display shows positive mini notice beforereturning to the previous screen.Advanced Features in Non-Connect Plus Mode61English
Note:The Priority icon appears left of the nameof the member.There is no Priority icon if priority is set toNone.ScanWhen you start a scan, your radio cycles through theprogrammed scan list for the current channel lookingfor voice activity.The LED blinks yellow and the scan icon appears onthe status bar.During a dual mode scan, if you are on a digitalchannel, and your radio locks onto an analogchannel, it automatically switches from digital mode toanalog mode for the duration of the call. This is alsotrue for the reverse.There are two ways of initiating scan:•Main Channel Scan (Manual): Your radio scansall the channels/groups in your scan list. Onentering scan, your radio may (depending on thesettings) automatically start on the last scanned“active” channel/group or on the channel wherescan was initiated.•Auto Scan (Automatic): Your radio automaticallystarts scanning when you select a channel/groupthat has Auto Scan enabled.Note:This feature is not applicable in Capacity Plusand Linked Capacity Plus.Starting and Stopping Scan1 to access the menu.2 or to Scan and press to select.3 or to Scan State and press toselect.4 or to required scan state and press to select.•The display shows Scan On when Scan isenabled. The LED blinks yellow and the scanicon appears.Advanced Features in Non-Connect Plus Mode62English
•The display shows Scan Off if Scan isdisabled. The LED turns off and the scan icondisappears.Responding to a Transmission During a ScanDuring scanning, your radio stops on a channel/groupwhere activity is detected. The radio stays on thatchannel for a programmed time period known as“hang time”.1Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth. If the Channel Free Indication feature isenabled, you hear a short alert tone the momentthe transmitting radio releases the PTT button,indicating the channel is free for you to respond.2Press the PTT button during hang time.The LED lights up solid green.3Release the PTT button to listen.If you do not respond within the hang time, theradio returns to scanning other channels/groups.Deleting a Nuisance ChannelIf a channel continually generates unwanted calls ornoise (termed a “nuisance” channel), you cantemporarily remove the unwanted channel from thescan list.This capability does not apply to the channeldesignated as the Selected Channel.Deleting a “nuisance” channel is only possiblethrough the programmed Nuisance Channel Deletebutton. This feature is not accessible through themenu.1When your radio “locks on to” an unwanted ornuisance channel, press the programmedNuisance Channel Delete button until you hear atone.2Release the Nuisance Channel Delete button.The nuisance channel is deleted.Restoring a Nuisance ChannelTo restore the deleted nuisance channel, do one ofthe following:• Turn the radio off and then power it on again.Advanced Features in Non-Connect Plus Mode63English
• Stop and restart a scan via the programmed Scanbutton or menu.• Change the channel via the Channel Up/Downbuttons.Vote Scan Vote Scan provides you with wide area coverage inareas where there are multiple base stationstransmitting identical information on different analogchannels.Your radio scans analog channels of multiple basestations and performs a voting process to select thestrongest received signal. Once that is established,your radio unmutes to transmissions from that basestation.The LED blinks yellow and the vote scan iconappears on the status bar.To respond to a transmission during a Vote Scan,follow the same procedures as Responding to aTransmission During a Scan on page 63.Contact SettingsContacts provides “address-book” capabilities on yourradio. Each entry corresponds to an alias or ID thatyou use to initiate a call.Each entry, depending on context, associates withone of five types of calls: Group Call, Private Call, AllCall, PC Call or Dispatch Call.PC Call and Dispatch Call are data-related. They areonly available with the applications. Refer to the dataapplications documentation for more information.Note:If the Privacy feature is enabled on a channel,you can make privacy-enabled Group Call,Private Call, and All Call on that channel. Onlytarget radios with the same Privacy Key, or thesame Key Value and Key ID as your radio willbe able to unscramble the transmission.See Privacy on page 99 for moreinformation.Additionally, Contacts menu allows you to assigneach entry to a programmable number key or moreon a keypad microphone. If an entry is assigned to aAdvanced Features in Non-Connect Plus Mode64English
number key, your radio can perform a quick dial onthe entry.Your radio supports two Contacts lists, one for Analogcontacts and one for Digital contacts, with a maximumof 500 members for Analog and 1000 for Digital oneach Contacts list respectively.Each entry within Contacts displays the followinginformation:• Call Type• Call Alias• Call IDNote:You can add or edit subscriber IDs for theDigital Contacts list. Deleting subscriber IDscan only be performed by your dealer.For the Analog Contacts list, you can onlyview the subscriber IDs, edit the subscriberIDs, and initiate a Call Alert. Adding anddeleting capabilities can only be performed byyour dealer.Making a Group Call from Contacts1 to access the menu.2 or to Contacts and press toselect.The entries are alphabetically sorted.3 or to the required group alias or ID.4Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.5Press the PTT button to make the call.The LED lights up solid green.6Release the PTT button to listen.When any user in the group responds, the LEDblinks green. You see the Group Call icon, thegroup ID, and the user’s ID on your display.7 If the Channel Free Indication feature isenabled, you hear a short alert tone the momentthe transmitting radio releases the PTT button,indicating the channel is free for you to respond.Press the PTT button to respond.If there is no voice activity for a predeterminedperiod of time, the call ends.Advanced Features in Non-Connect Plus Mode65English
Making a Private Call from Contacts 1 to access the menu.2 or to Contacts and press toselect.The entries are alphabetically sorted.3 or to the required subscriber alias orID and press to select.4Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.5Press the PTT button to make the call.The LED lights up solid green. The display showsthe destination alias.6Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.7Release the PTT button to listen.When the target radio responds, the LED blinksgreen and the display shows the transmittinguser's ID.8 If the Channel Free Indication feature isenabled, you hear a short alert tone the momentthe transmitting radio releases the PTT button,indicating the channel is free for you to respond.Press the PTT button to respond.If there is no voice activity for a predeterminedperiod of time, the call ends.The display shows Call Ended.Assigning an Entry to a Programmable Number Key Note:See Making a Group, Private or All Call withthe Programmable Number Key on page 53for details on making a Group, Private or AllCall with the programmed number key(s).1 to access the menu.2 or to Contacts and press toselect.The entries are alphabetically sorted.Advanced Features in Non-Connect Plus Mode66English
3 or to the required alias or ID and press to select.4 or to Program Key and press toselect.5 or to the desired number key andpress to select.If the number key is currently assigned to anotherentry, the display shows The Key is AlreadyAssigned and then, the first line of the displayshows Overwrite?. Do one of the following.• or to Yes and press tooverwrite the number key assignment.• or to No and press to returnto the previous step.Each entry can be associated to different numberkeys. You see a before each number key that isassigned to an entry. If the is before Empty, thatnumber key is not assigned.If a number key is assigned to an entry in aparticular mode, this feature is not supported whenyou long press the number key in another mode.The radio sounds a positive indicator tone and thedisplay shows positive mini notice.The screen automatically returns to the previousmenu.Removing the Association between Entry andProgrammable Number Key 1Access the required alias or ID via:RadioControlStepsProgram-mednumberkeyLong press the programmed numberkey to the required alias or ID; press to select.Menu 1 to access the menu.Advanced Features in Non-Connect Plus Mode67English
RadioControlSteps2 or to Contacts andpress to select. The entriesare alphabetically sorted.3 or to the required sub-scriber alias or ID and press to select.2 or to Program Key and press toselect.3 or to Empty and press to select.The first line of the display shows Clear fromall keys? .4 or to Yes and press to select.Note:When an entry is deleted, the associationbetween the entry and its programmednumber key(s) is removed.The radio sounds a positive indicator tone and thedisplay shows positive mini notice.The screen automatically returns to the previousmenu.Adding a New Contact1 to access the menu.2 or to Contacts and press toselect.3 or to New Contact and press toselect.4 or to the required contact type, eitherRadio Contact or Phone Contact, and press to select.Advanced Features in Non-Connect Plus Mode68English
5Use the keypad to enter the contact number andpress to confirm.6Use the keypad to enter the contact name andpress to confirm.7If adding a Radio Contact, or to therequired ringer type and press to select.The radio sounds a positive indicator tone and thedisplay shows positive mini notice.Setting a Default Contact 1 to access the menu.2 or to Contacts and press toselect.3 or to the required alias or ID and press to select.4 or to Set as Default and press to select.The radio sounds a positive indicator tone and thedisplay shows positive mini notice.A appears beside the selected default alias orID.Call Indicator SettingsActivating and Deactivating Call Ringers for Call AlertYou can select, or turn on or off ringing tones for areceived Call Alert.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.Advanced Features in Non-Connect Plus Mode69English
4 or to Tones/Alert and press toselect.5 or to Call Ringers and press to select.6 or to Call Alert and press toselect.The current tone is indicated by a .7 or to the required tone and press to select. appears beside selected tone.Activating and Deactivating Call Ringers for PrivateCalls You can turn on or off the ringing tones for a receivedPrivate Call.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Tones/Alerts and press to select.5 or to Call Ringers and press to select.6 or to Private Call and press to select.7Press to enable/disable the Private Callringing tones.The display shows beside Enabled, if PrivateCall ringing tones are enabled.The disappears from beside Enabled, if PrivateCall ringing tones are disabled.Advanced Features in Non-Connect Plus Mode70English
Activating and Deactivating Call Ringers for SelectiveCall You can select, or turn on or off ringing tones for areceived Selective Call.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Tones/Alert and press toselect.5 or to Call Ringers and press to select.6 or to Selective Call and press to select.The current tone is indicated by a .7 or to the required tone and press to select. appears beside selected tone.Activating and Deactivating Call Ringers for TextMessageYou can turn on or off the ringing tones for a receivedText Message.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Tones/Alerts and press to select.Advanced Features in Non-Connect Plus Mode71English
5 or to Call Ringers and press to select.6 or to Text Message and press to select.The current tone is indicated by a .7 or to the required tone and press to select. appears beside selected tone.Activating and Deactivating Call Ringers for TelemetryStatus with TextYou can turn on or off the ringing tones for a receivedTelemetry Status with Text.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Tones/Alerts and press to select.5 or to Call Ringers and press to select.6 or to Telemetry and press toselect.The current tone is indicated by a .Assigning Ring StylesYou can program your radio to sound one of tenpredefined ringing tones when receiving a Call Alertor a Text Message from a particular contact.The radio sounds out each ring style as you navigatethrough the list.1 to access the menu.Advanced Features in Non-Connect Plus Mode72English
2 or to Contacts and press toselect.The entries are alphabetically sorted.3 or to the required alias or ID and press to select.4 or to Edit and press to select.5 or to Edit Ringtone and press to select.6 or to the required tone and press to select. appears beside selected tone.Escalating Alarm Tone VolumeYou can program your radio to continually alert youwhen a radio call remains unanswered. This is doneby automatically increasing the alarm tone volumeover time. This feature is known as Escalert.Call Log FeaturesYour radio keeps track of all recent outgoing,answered, and missed Private Calls. Use the call logfeature to view and manage recent calls.You can perform the following tasks in each of yourcall lists:• Store alias or ID to Contacts• Delete• View DetailsViewing Recent CallsThe lists are Missed, Answered, and Outgoing.1 to access the menu.2 or to Call Log and press toselect.3 or to preferred list and press toselect.The display shows the most recent entry at the topof the list.Advanced Features in Non-Connect Plus Mode73English
4 or to view the list.Press the PTT button to start a Private Call withthe current selected alias or ID.Deleting a Call from a Call List1 to access the menu.2 or to Call Log and press toselect.3 or to the required list and press to select.When you select a call list and it contains noentries, the display shows List Empty, andsounds a low tone if Keypad Tones are turned on(see Turning Keypad Tones On or Off on page141).4 or to the required alias or ID and press to select.5 or to Delete Entry? and press to select.6Do one of the following:•Press to select Yes to delete the entry.The display shows Entry Deleted.• or to No, and press the buttonto return to the previous screen.Viewing Details from a Call List1 to access the menu.2 or to Call Log and press toselect.3 or to the required list and press to select.4 or to the required alias or ID and press to select.Advanced Features in Non-Connect Plus Mode74English
5 or to View Details and press to select.Display shows details.Call Alert OperationCall Alert paging enables you to alert a specific radiouser to call you back when they are able to do so.This feature is applicable for subscriber aliases or IDsonly and is accessible through the menu via Contactsor manual dial.Receiving and Responding to a Call AlertWhen you receive a Call Alert page, you thenotification list listing a Call Alert with the alias or ID ofthe calling radio on the display.When you hear a repetitive tone and the LEDblinks yellow, do one of the following:• Press the PTT button while the display stillshows the Call Alert in the Notification List torespond with a Private Call.•Press to exit the Notification List. Thealert is moved to the Missed Call Log.See Notification List on page 111 for details aboutthe Notification List.See Call Log Features on page 73 for detailsabout the Missed Call List.Making a Call Alert from the Contact List1 to access the menu.2 or to Contacts and press toselect.3 or to the required subscriber alias orID and press to select.4 or to Call Alert and press toselect.The display shows Call Alert and thesubscriber alias or ID, indicating that the Call Alerthas been sent.The LED lights up solid green when your radio issending the Call Alert.Advanced Features in Non-Connect Plus Mode75English
If the Call Alert acknowledgement is received, thedisplay shows positive mini notice.If the Call Alert acknowledgement is not received,the display shows negative mini notice.Making a Call Alert with the One Touch Access ButtonPress the programmed One Touch Accessbutton to make a Call Alert to the predefined aliasor ID.The display shows Call Alert and thesubscriber alias or ID, indicating that the Call Alerthas been sent.The LED lights up solid green when your radio issending the Call Alert.If the Call Alert acknowledgement is received, thedisplay shows positive mini notice.If the Call Alert acknowledgement is not received,the display shows negative mini notice.Emergency OperationAn Emergency Alarm is used to indicate a criticalsituation. You are able to initiate an Emergency atany time on any screen display even when there isactivity on the current channel.Your dealer can set the duration of a button press forthe programmed Emergency button, except for longpress, which is similar with all other buttons:Short press Between 0.05 seconds and 0.75seconds.Long press Between 1.00 second and 3.75seconds.The Emergency button is assigned with theEmergency On/Off feature. Check with your dealer forthe assigned operation of the Emergency button.Note:If the short press for the Emergency button isassigned to turn on the Emergency mode,then the long press for the Emergency buttonis assigned to exit the Emergency mode.If the long press for the Emergency button isassigned to turn on the Emergency mode,then the short press for the Emergency buttonis assigned to exit the Emergency mode.Your radio supports three Emergency Alarms:Advanced Features in Non-Connect Plus Mode76English
• Emergency Alarm• Emergency Alarm with Call•Emergency Alarm with Voice to Follow Note:Only one of the Emergency Alarms above canbe assigned to the programmed Emergencybutton.In addition, each alarm has the following types:•Regular – Radio transmits an alarm signal andshows audio and/or visual indicators.•Silent – Radio transmits an alarm signal withoutany audio or visual indicators. Radio receives callswithout any sound through the radio’s speaker,until you press the PTT button to initiate the call.•Silent with Voice – Radio transmits an alarmsignal without any audio or visual indicators, butallow incoming calls to sound through the radio’sspeaker.Receiving an Emergency AlarmOn receiving an emergency alarm the emergencyicon appears, a tone sounds, the LED blinks red andthe radio displays the emergency caller alias. If morethan one alarm has occurred all emergency calleraliases are displayed in an Alarm List.1When receiving an emergency alarm, do one ofthe following:• If a single emergency call alias is displayed,press to view more details. Press again to view your action details.• If the multiple emergency caller aliases aredisplayed in the Alarm List, or tothe required alias and press to view moredetails. Press again to view your actionitems.2Press and select Yes to exit the Alarm List.To revisit the Alarm List, press to access themenu and select Alarm List.Responding to an Emergency Alarm1In the Alarm List, or to the requiredalias.Advanced Features in Non-Connect Plus Mode77English
2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.If the Channel Free Indication feature is enabled,you will hear a short alert tone the moment thetransmitting radio releases the PTT button,indicating the channel is now available for use.3Press PTT button to transmit non-emergencyvoice to the same group that the EmergencyAlarm was targeted to.Emergency voice can only be transmitted by theemergency initiating radio. All other radios(including the emergency receiving radio) transmitnon-emergency voice.The LED lights up solid green. Your radio remainsin the Emergency mode.4Do one of the following:• Wait for the Talk Permit Tone to finish (ifenabled) and speak clearly into themicrophone.• Wait for the PTT Sidetone to finish (if enabled)and speak clearly into the microphone.5Release the PTT button to listen.When the emergency initiating radio responds, theLED blinks green. You see the Group Call icon,the group ID, and transmitting radio ID on yourdisplay.6Your radio displays the Alarm List.Exiting Emergency Mode After Receiving theEmergency AlarmExit the Emergency mode by performing one ofthe following actions:• Delete the alarm items, see Deleting an AlarmItem from the Alarm List for more information.• Power down the radio.Sending an Emergency AlarmThis feature allows you to send an Emergency Alarm,a non-voice signal, which triggers an alert indicationon a group of radios.If your radio is set to Silent, it does not display anyaudio or visual indicators during Emergency mode.Press the programmed Emergency On button.The display shows one of the following:Advanced Features in Non-Connect Plus Mode78English
•Tx Alarm and the destination alias.•Tx Telegram and the destination alias.The LED lights up solid green and the Emergencyicon appears on the Home screen display.When an Emergency Alarm acknowledgement isreceived, the Emergency tone sounds and theLED blinks green. The display shows Alarm Sent.If your radio does not receive an EmergencyAlarm acknowledgement, and after all retries havebeen exhausted, a tone sounds and the displayshows Alarm Failed.Radio exits the Emergency Alarm mode andreturns to the Home screen.Sending an Emergency Alarm with CallThis feature allows you to send an Emergency Alarmto a group of radios. Upon acknowledgement by aradio within the group, the group of radios cancommunicate over a programmed Emergencychannel.If your radio is set to Silent, it does not display anyaudio or visual indicators during Emergency mode, orallow any received calls to sound through the speakerof the radio, until you press the PTT button to initiatethe call.If your radio is set to Silent with Voice, it does notdisplay any audio or visual indicators duringEmergency mode, but allow incoming calls to soundthrough the speaker of the radio. The indicators onlyappear once you press the PTT button to initiate, orrespond to, the call.1Press the programmed Emergency On button orthe Emergency footswitch.The display shows Sending Alarm, whichalternates with your radio ID.•Tx Alarm and the destination alias.•Tx Telegram and the destination alias.The LED lights up solid green and the Emergencyicon appears on the Home screen display.When an Emergency Alarm acknowledgement isreceived, the Emergency tone sounds and theLED blinks green. The display shows Alarm Sent.Your radio enters the emergency call mode whenthe display shows Emergency and the destinationgroup alias.Advanced Features in Non-Connect Plus Mode79English
2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press PTT button to make the call.The LED lights up solid green and the Group iconappears on the display.4Wait for one of the following tones to finish (ifenabled), and speak clearly into the microphone.• The Talk Permit Tone•The PTT Sidetone 5Release the PTT button to listen. If the Channel Free Indication feature isenabled, you hear a short alert tone the momentthe transmitting radio releases the PTT button,indicating the channel is free for you to respond.6Press the PTT button to respond.7Once your call ends, press Emergency Off buttonto exit the Emergency mode.Sending an Emergency Alarm with Voice to Follow This feature allows you to send an Emergency Alarmto a group of radios. The microphone of your radio isautomatically activated, allowing you to communicatewith the group of radios without pressing the PTTbutton.This activated microphone state is also known as “hotmic”.Note:Your radio cannot detect a non-IMPRESmicrophone that is attached to the rearaccessory connector.When no microphone is detected at thespecified programmed connector, your radiochecks the alternative connector. Here, yourradio gives priority to the detectedmicrophone. See the table for examples.Type of microphoneconnected to...Program-medConnec-tor*Radiouses...FrontConnec-torRearConnec-torNon-IM-PRESAny mi-crophoneRear Rear mi-crophoneAdvanced Features in Non-Connect Plus Mode80English
Type of microphoneconnected to...Program-medConnec-tor*Radiouses...FrontConnec-torRearConnec-torAny mi-crophoneNon-IM-PRESFront Front mi-crophoneIMPRES Non-IM-PRESRear Front mi-crophoneNon-IM-PRESIMPRES Front Rear mi-crophone*Check with your dealer or system adminis-trator for more information.If your radio has Emergency Cycle Mode enabled,repetitions of hot mic and receiving period are madefor a programmed duration.If you press the PTT button during the programmedreceiving period, you hear a prohibit tone, indicatingthat you should release the PTT button. The radioignores the PTT press and remains in Emergencymode.Note:If you press the PTT button during hot mic,and continue to press it after the hot micduration expires, the radio continues totransmit until you release the PTT button.If your radio is set to Silent, it does not display anyaudio or visual indicators during Emergency mode, orallow any received calls to sound through the speakerof the radio, until the programmed hot mictransmission period is over, and you press the PTTbutton.If your radio is set to Silent with Voice, it does notdisplay any audio or visual indicators duringEmergency mode when you are making the call withhot mic, but allow sound through the speaker of theradio when the target radio responds after theprogrammed hot mic transmission period is over. Theindicators only appear when you press the PTTbutton.Note:If the Emergency Alarm request fails, the radiodoes not retry to send the request, and entersthe hot mic state directly.Advanced Features in Non-Connect Plus Mode81English
1Press the programmed Emergency On button orthe Emergency On footswitch.The display shows one of the following:•Tx Alarm and the destination alias.•Tx Telegram and the destination alias.The LED lights up solid green and the Emergencyicon is displayed.2Once the display shows Alarm Sent, speakclearly into the microphone.When hot mic has been enabled, the radioautomatically transmits without a PTT button pressuntil the hot mic duration expires. Whiletransmitting, the LED lights up solid green and theEmergency icon appears on the display.3The radio automatically stops transmitting whenthe cycling duration between hot mic and receivingcalls expires, if Emergency Cycle Mode isenabled.4Once the hot mic duration expires, the radioautomatically stops transmitting. To transmitagain, press the PTT button.Reinitiating an Emergency ModeNote:This feature is only applicable to the radiosending the Emergency Alarm.There are two instances where this can happen:• You change the channel while the radio is inEmergency mode. This exits the Emergencymode. If Emergency Alarm is enabled on this newchannel, the radio reinitiates Emergency.• You press the programmed Emergency Onbutton during an Emergency initiation/transmissionstate. This causes the radio to exit this state, andto reinitiate Emergency.Exiting Emergency Mode After Sending the EmergencyAlarmYour radio exits Emergency mode when one of thefollowing occurs:• Emergency Alarm acknowledgement is received(for Emergency Alarm only).• All retries to send the alarm have been exhausted.• The Emergency Off button is pressed.Advanced Features in Non-Connect Plus Mode82English
Note:If your radio is powered off, it exits theEmergency mode. The radio will not reinitiatethe Emergency mode automatically when it isturned on again.If you change channels when your radio is inEmergency mode to a channel that has noemergency system configured, No Emergencyis shown on your display.Text Message Features Your radio is able to receive data, for example a textmessage, from another radio or an e-mail application.Sending a Quick Text MessageYour radio supports a maximum of 50 Quick Textmessages as programmed by your dealer.While Quick Text messages are predefined, you canedit each message before sending it.1Access the Text Message feature.Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Quick Text and press toselect.3 or to the required and press toselect. Press to select.4 or to the required alias or ID and press to select.The display shows the transitional mini notice,confirming your message is being sent.Advanced Features in Non-Connect Plus Mode83English
If the message is sent, a tone sounds and thedisplay shows the positive mini notice.If the message is not sent, a low tone sounds andthe display shows the negative mini notice.Sending a Quick Text Message with the One TouchAccess ButtonPress the programmed One Touch Accessbutton to send a predefined Quick Text messageto a predefined alias or ID.The display shows the transitional mini notice,confirming your message is being sent.If the message is sent, a tone sounds and thedisplay shows the positive mini notice.If the message cannot be sent, a low tone soundsand the display shows the negative mini notice.If the text message fails to send, the radio returnsyou to the Resend option screen (see ManagingFail-to-Send Text Messages on page 85).Accessing the Drafts FolderThe Drafts folder stores a maximum of ten (10) lastsaved messages. When the folder is full, the nextsaved text message automatically replaces the oldesttext message in the folder.Note:You can edit saved text message beforesending it. Only available with a keypadmicrophone (see Editing and Sending a SavedText Message on page 165. Long press at any time to return to the Home screen.Viewing a Saved Text Message1Access the Text Message feature.Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.Advanced Features in Non-Connect Plus Mode84English
2 or to Drafts and press toselect.3 or to the required message and press to select.Deleting a Saved Text Message from Drafts1Access the Text Message feature.Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Drafts and press toselect.3 or to the required message and press to select.4 or to Delete and press to deletethe text message.Managing Fail-to-Send Text MessagesYou can select one of the following options while atthe Resend option screen:• Resend• Forward• Edit (only available with a keypad microphone.See Editing a Text Message on page 167 formore information).Note:If the channel type (i.e. conventional digital orCapacity Plus or Linked Capacity Plus) is nota match, you can only edit and forward a Fail-to-Send message.Advanced Features in Non-Connect Plus Mode85English
Resending a Text MessagePress to resend the same message to thesame subscriber/group alias or ID.If the message is sent successfully, a tone soundsand the display shows the positive mini notice.If the message cannot be sent, the display showsthe negative mini notice.Forwarding a Text MessageSelect Forward to send the message to anothersubscriber/group alias or ID.1 or to Forward and press toselect.2Select the message recipient by or tothe required alias or ID and press to select.The display shows transitional mini notice,confirming your message is being sent.If the message is sent successfully, a tone soundsand the display shows positive mini notice.If the message cannot be sent, a low tone soundsand the display shows negative mini notice.Note:You can also manually select a target radioaddress (see Forwarding a Text Messageby Manual Dial on page 166).Managing Sent Text MessagesOnce a message is sent to another radio, it is savedin Sent Items. The most recent sent text message isalways added to the top of the Sent Items list.The Sent Items folder is capable of storing amaximum of thirty (30) last sent messages. When thefolder is full, the next sent text message automaticallyreplaces the oldest text message in the folder.Note:Long press at any time to return to theHome screen.Viewing a Sent Text Message1Access the Text Message feature by performingone of the following actions:Advanced Features in Non-Connect Plus Mode86English
Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Sent Items and press toselect.3 or to the required message and press to select.A subject line may be shown if the message isfrom an e-mail application.The icon at the top right corner of the screenindicates the status of the message (see Sent ItemIcons on page 35).Sending a Sent Text MessageYou can select one of the following options whileviewing a sent text message:• Resend• Forward• Edit• DeleteNote:If the channel type (i.e. conventional digital orCapacity Plus or Linked Capacity Plus) is nota match, you can only edit, forward, or deletea Sent message.1Press again while viewing the message.2 or to one of the following options andpress to select.Op-tionStepsFor‐wardSelect Forward to send the selectedtext message to another subscriber/Advanced Features in Non-Connect Plus Mode87English
Op-tionStepsgroup alias or ID (see Forwarding a TextMessage on page 86).De‐leteSelect Delete to delete the text mes-sage.Re‐send Select Resend to resend the selectedtext message to the same subscriber/group alias or ID.The display shows transitional mini no-tice, confirming that the same messageis being sent to the same target radio.If the message is sent successfully, atone sounds and the display shows posi-tive mini notice.If the message cannot be sent, a lowtone sounds and the display shows neg-ative mini notice.If the message fails to send, the radioreturns you to the Resend option screen.Op-tionStepsPress to resend the message tothe same subscriber/group alias or ID.Note:Changing the volume, andpressing any button, except for, , or , returnsyou to the message.The radio exits the Resend op-tion screen if you press the PTTbutton to initiate a Private orGroup Call, or to respond to aGroup Call. The radio also exitsthe screen when it receives atext message, an emergencycall or alarm, or a call alert.The display returns to the Re‐send option screen if you pressthe PTT button to respond to aPrivate Call (except when the ra-dio is displaying the Missed CallAdvanced Features in Non-Connect Plus Mode88English
Op-tionStepsscreen), and at the end of an AllCall.If you exit the message sending screen while themessage is being sent, the radio updates thestatus of the message in the Sent Items folderwithout providing any indication in the display orvia sound.If the radio changes mode or powers down beforethe status of the message in Sent Items isupdated, the radio cannot complete any In-Progress messages and automatically marks itwith a Send Failed icon.The radio supports a maximum of five (5) In-Progress messages at one time. During thisperiod, the radio cannot send any new messageand automatically marks it with a Send Failed icon.Deleting All Sent Text Messages from Sent Items1Access the Text Message feature by performingone of the following actions:Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Sent Items and press toselect.When you select Sent Items and it contains notext messages, the display shows List Empty,and sounds a low tone if Keypad Tones are turnedon (see Turning Keypad Tones On or Off on page141).3 or to Delete All and press toselect.4Choose one of the following.Advanced Features in Non-Connect Plus Mode89English
• or to Yes and press to select.The display shows positive mini notice.• or to No and press to returnto the previous screen.Receiving a Text MessageWhen your radio receives a message, the displayshows the alias or ID of the sender and the Messageicon.You can select one of the following options whenreceiving a text message:• Read• Read Later• DeleteNote:If the channel type (i.e. conventional digital orCapacity Plus or Linked Capacity Plus) is nota match, you can only forward, delete, ordelete all Received messages.Long press at any time to return to theHome screen.Reading a Text Message1 or to one of the options described nextand press to select.Option StepsRead? Choosing this option, opens the se-lected message in the Inbox. A subjectline may be shown if the message isfrom an e-mail application.Press to return to the Inbox.Press a second time to reply,forward, or delete the text message.ReadLater Choosing this option, returns you tothe screen you were on prior to receiv-ing the text message.Delete Choosing this option, deletes the se-lected text message.2 or to Read? and press to select.Advanced Features in Non-Connect Plus Mode90English
Selected message in the Inbox opens.A subject line may be shown if the message isfrom an e-mail application.3Do one of the following:•Press to return to the Inbox.•Press a second time to reply, forward, ordelete the text message.Managing Received Text MessagesUse the Inbox to manage your text messages. TheInbox is capable of storing a maximum of 30messages.Text messages in the Inbox are sorted according tothe most recently received.Your radio supports the following options for textmessages:• Reply (via Quick Text)• Forward• Delete• Delete AllNote:If the channel type (i.e. conventional digital orCapacity Plus or Linked Capacity Plus) is nota match, you can only forward, delete, ordelete all Received messages.Note:Long press at any time to return to theHome screen.Viewing a Text Message from the Inbox1 to access the menu.2 or to Messages and press toselect.3 or to Inbox and press to select.4 or to view the messages.A subject line may be shown if the message isfrom an e-mail application.5Do one of the following:Advanced Features in Non-Connect Plus Mode91English
•Press to select the current message, andpress again to reply, forward, or deletethat message.•Long press to return to the Home screen.Viewing a Telemetry Status Text Message fromthe Inbox1 to access the menu.2 or to Messages and press toselect.3 or to Inbox and press to select.4 or to the required message and press to select.You cannot reply to a Telemetry Status textmessage.The display shows Telemetry: <Status TextMessage>.5Long press to return to the Home screen.Replying to a Text Message from the Inbox1Access the Text Message feature.Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Inbox and press to select.3 or to the required message and press to select.A subject line may be shown if the message isfrom an e-mail application.Advanced Features in Non-Connect Plus Mode92English
4Press once more to access the sub-menu.5 or to Reply and press to select.6 or to Quick Reply and press toselect.7 or to the required message and press to select.The display shows transitional mini notice,confirming your message is being sent.If the message is sent successfully, a tone soundsand the display shows positive mini notice.If the message cannot be sent, a low tone soundsand the display shows negative mini notice.If the message cannot be sent, the radio returnsyou to the Resend option screen (see ManagingFail-to-Send Text Messages on page 85).Deleting a Text Message from the Inbox1Access the Text Message feature by performingone of the following actions:Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Inbox and press to select.3 or to the required message and press to select.A subject line may be shown if the message isfrom an e-mail application.Advanced Features in Non-Connect Plus Mode93English
4Press once more to access the sub-menu.5 or to Delete and press toselect.6 or to Yes and press to select.The display shows positive mini notice and thescreen returns to the Inbox.Deleting All Text Messages from the Inbox1Access the Text Message feature by performingone of the following actions:Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Inbox and press to select.When you select Inbox and it contains no textmessages, the display shows List Empty, andsounds a low tone if Keypad Tones are turned on(see Turning Keypad Tones On or Off on page141).3 or to Delete All and press toselect.4 or to Yes and press to select.The display shows positive mini notice.Job TicketsYour radio is able to receive Job Tickets, which aremessages from the dispatcher listing out tasks thatneed to be performed.You can respond to Job Tickets in order to sort theminto Job Ticket Folders. By default, the folders are“All", "New", "Started", and "Completed". Check withyour dealer or system administrator for an additional10 folders.Advanced Features in Non-Connect Plus Mode94English
Your radio supports a maximum of 100 Job Tickets,all of which can be seen in the "All" folder. New JobTickets and Job Tickets with recent change in stateare listed first. Upon reaching the maximum numberof Job Tickets, the next Job Ticket automaticallyreplaces the last Job Ticket in your radio.Note:Job Tickets are retained even after radio ispowered down and powered up again.Your radio will automatically detect anddiscard the duplicated Job Tickets with thesame subject line.Accessing the Job Ticket FolderAccess the Job Ticket folder.RadioControlStepsPro-gram-medJobTicketbutton1Press the programmed Job Ticketbutton.2 or to the required folderand press to select.RadioControlStepsNote:You can also press and the corresponding num-ber key (1–9) to access therequired folder.Menu 1 to access the menu.2 or to Job Tickets andpress to select.3 or to the required folderand press to select.Note:You can also press and the corresponding num-ber key (1–9) to access therequired folder.Advanced Features in Non-Connect Plus Mode95English
RadioControlSteps4 or to the required JobTicket and press to select.Logging In and Out of the Remote ServerThis feature allows you to log in and log out of theremote server by using your user ID via the menu.1 to access the menu.2 or to Log In and press toselect.If you are already logged in, menu displays LogOut.The display shows a transitional mini notice,confirming that you have been logged insuccessfully.If you have failed to log in, the display shows anegative mini notice.Creating and Sending a Job TicketYour radio is able to create Job Tickets, which isbased on a Job Ticket template and send out tasksthat need to be performed.Note:CPS is required to configure the Job Tickettemplate. Check with your dealer or systemadministrator to determine how your radio hasbeen programmed.1 to access the menu.2 or to Job Tickets and press toselect.3 or to Create Ticket and press to select.4Depending on how your radio is configured, doone of the following:Advanced Features in Non-Connect Plus Mode96English
If ThenIf your radio isconfigured withone Job Tickettemplate,1Use the keypad to type therequired room number andpress to select.2 or to Room Sta‐tus and press to se-lect.3 or to the re-quired option and press to select.If your radio isconfigured withmore than oneJob Ticket tem-plate, or to the requiredoption and press to se-lect.5 or to Send and press to select.The display shows transitional mini notice,confirming your message is sent.If the message is not sent, the display showsnegative mini notice.Responding to the Job Ticket1 to access the menu.2 or to Job Tickets and press toselect.3 or to the required folder and press to select.You can also press the corresponding number key(1–9) to access the required folder.4 or to the required Job Ticket andpress to select.5Press once more to access the sub-menu.You can also press the corresponding number key(1–9) to Quick Reply.Advanced Features in Non-Connect Plus Mode97English
6 or to the required Job Ticket andpress to select.You can also press the corresponding number key(1–9) to respond to the job ticket.The display shows transitional mini notice, confirmingyour message being sent.If the message is sent, a tone sounds and the displayshows positive mini notice.If the message is not sent, a low tone sounds and thedisplay shows negative mini notice.Deleting a Job TicketDelete a Job Ticket.RadioControlStepsPro-gram-medJobTicketbutton1Press the programmed Job Ticketbutton.2 or to All and press to select.RadioControlStepsMenu 1 to access the menu.2 or to Job Tickets andpress to select.3 or to All and press to select.4 or to the required JobTicket and press to select.Note:At Step 4, while viewing theJob Ticket, press todelete.5Press again while viewing theJob Ticket.6 or to Delete and press to select.Advanced Features in Non-Connect Plus Mode98English
RadioControlStepsNote:You can also press todelete.Privacy If enabled, this feature helps to preventeavesdropping by unauthorized users on a channelby the use of a software-based scrambling solution.The signaling and user identification portions of atransmission are not scrambled.Your radio must have privacy enabled on the channelto send a privacy-enabled transmission, although thisis not a necessary requirement for receiving atransmission. While on a privacy-enabled channel,the radio is still able to receive clear (unscrambled)transmissions.Your radio supports two types of privacy:• Basic Privacy.• Enhanced Privacy.Only one of the privacy types above can be assignedto the radio.To unscramble a privacy-enabled call or datatransmission, your radio must be programmed tohave the same Privacy Key (for Basic Privacy), or thesame Key Value and Key ID (for Enhanced Privacy)as the transmitting radio.If your radio receives a scrambled call that is of adifferent Privacy Key, or a different Key Value andKey ID, you will either hear a garbled transmission(Basic Privacy) or nothing at all (Enhanced Privacy).Note:This feature is not applicable in Citizens Bandchannels that are in the same frequency.The LED lights up solid green while the radio istransmitting and blinks green rapidly when the radio isreceiving an ongoing privacy-enabled transmission.You can access this feature by performing one of thefollowing actions:• Press the programmed Privacy button to toggleprivacy on or off.• Using the Radio Menu as described by the stepsdescribed next.Advanced Features in Non-Connect Plus Mode99English
Note:Some radio models may not offer this Privacyfeature. Check with your dealer or systemadministrator for more information.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Privacy and press toselect.5Press to enable/disable Privacy.The display shows beside Enabled.The disappears from beside Enabled.Multi-Site Controls These features are applicable when your currentradio channel is part of an IP Site Connect or LinkedCapacity Plus configuration.See IP Site Connect on page 39 and Linked CapacityPlus on page 40 for more details about theseconfigurations.Starting an Automatic Site SearchNote:The radio only scans for a new site if thecurrent signal is weak or when the radio isunable to detect any signal from the currentsite. If the RSSI value is strong, the radioremains on the current site.RadioControlsStepsSiteLockOn/OffbuttonPress the programmed Site LockOn/Off button to toggle the start/stopautomatic site search.Advanced Features in Non-Connect Plus Mode100English
RadioControlsStepsRadiomenu 1 to access the menu.2 or to Utilities andpress to select.3 or to Radio Settingsand press to select.4 or to Site Roamingand press to select.5 or to Site Lock andpress to select.If the current channel is a multi-site channel withan attached roam list and is out of range, the radioalso performs an automatic site search (site isunlocked) during:• a PTT button press.• data transmission.A tone sounds and the display shows SiteUnlocked.The radio then returns to the Home screen. Thedisplay shows the Site Roaming icon and channelalias.The LED blinks yellow rapidly when the radio isactively searching for a new site, and turns offonce the radio locks on to a site.Stopping an Automatic Site SearchWhen your radio is actively searching for a newsite, you can stop the search byRadioControlsStepsSite LockOn/OffbuttonRadiomenu 1 to access the menu.2 or to Utilities andpress to select.Advanced Features in Non-Connect Plus Mode101English
RadioControlsSteps3 or to Radio Set‐tings and press to select.4 or to Site Roamingand press to select.5 or to Site Lock andpress to select.A tone sounds and the display shows SiteLocked.The radio then returns to the Home screen. andthe display shows the channel alias.Starting a Manual Site SearchStart a Manual Site Search byRadioControlsStepsManualSiteRoambuttonPress the programmed Manual SiteRoam button to start the manual sitesearch.Radiomenu 1 to access the menu.2 or to Utilities andpress to select.3 or to Radio Set‐tings and press to select.4 or to Site Roamingand press to select.5 or to Active Searchand press to select.A tone sounds, the display shows Finding Site,and the LED blinks green.Advanced Features in Non-Connect Plus Mode102English
If a new site is found, a tone sounds and the LEDturns off. The display shows Site <Alias>Found.If there is no available site within range, a tonesounds and the LED turns off. The display showsOut of Range.If a new site is within range, but the radio is unableto connect to it, a tone sounds and the LED turnsoff. The display shows Channel Busy.The radio returns to the Home screen.SecurityYou can enable or disable any radio in the system.For example, you might want to disable a stolenradio, to prevent the thief from using it, and enablethat radio, when it is recovered.Note:Performing Radio Disable and Enable islimited to radios with these functions enabled.Check with your dealer or systemadministrator for more information.Radio Disable1Access this feature byRadioCon-trolsStepsRadioDisablebutton1Press the programmed Radio Disa-ble button.2 or to the required aliasor ID and press to select.Radiomenu 1 to access the menu.2 or to Contacts andpress to select. The entriesare alphabetically sorted.3Use one of the steps described nextto select the required subscriberalias or ID:• Select the required alias or ID di-rectly.Advanced Features in Non-Connect Plus Mode103English
RadioCon-trolsSteps• or to the requiredalias or ID and press toselect.•Use the Manual Dial menu.• or to Manual Di‐al and press to select.• or to Radio Num‐ber and press to select.• The first line of the displayshows Radio Number:. Thesecond line of the displayshows a blinking cursor. Usethe keypad to enter the sub-scriber alias or ID and press.RadioCon-trolsSteps4 or to Radio Disableand press to select.The display shows Radio Enable: <SubscriberAlias or ID> and the LED lights up solid green.2Wait for acknowledgement.If successful, the radio sounds a positive indicatortone and the display shows positive mini notice.If not successful, the radio sounds a negativeindicator tone and the display shows negative mininotice.Do not press during the Radio Disableoperation as you will not get an acknowledgementmessage.Radio Enable1Access this feature byAdvanced Features in Non-Connect Plus Mode104English
RadioCon-trolsStepsRadioEnablebutton1Press the programmed Radio Ena-ble button.2 or to the required aliasor ID and press to select.Radiomenu 1 to access the menu.2 or to Contacts andpress to select. The entriesare alphabetically sorted.3Use one of the steps described nextto select the required subscriberalias or ID• Select the required alias or ID di-rectly.RadioCon-trolsSteps• or to the requiredalias or ID and press toselect.•Use the Manual Dial menu.• or to Manual Di‐al and press to select.• or to Radio Num‐ber and press to select.• The first line of the displayshows Radio Number:. Thesecond line of the displayshows a blinking cursor. Usethe keypad to enter the sub-scriber alias or ID and press.Advanced Features in Non-Connect Plus Mode105English
RadioCon-trolsSteps4 or to Radio Enableand press to select.The display shows Radio Enable: <SubscriberAlias or ID> and the LED lights up solid green.2Wait for acknowledgement.If successful, the radio sounds a positive indicatortone and the display shows positive mini notice.If not successful, the radio sounds a negativeindicator tone and the display shows negative mininotice.Do not press during the Radio Enableoperation as you will not get an acknowledgementmessage.Lone WorkerThis feature raises an emergency if there is no useractivity, such as any radio button press or activationof the channel selector, for a predefined time.Before raising the emergency, when the inactivitytimer expires, the radio warns the user via an audioindicator.If there is still no acknowledgement by the userbefore the predefined reminder timer expires, theradio initiates an Emergency Alarm.Only one of the following Emergency Alarms can beassigned to this feature:• Emergency Alarm• Emergency Alarm with Call•Emergency Alarm with Voice to Follow The radio remains in the emergency state allowingvoice messages to proceed until action is taken. See Emergency Operation on page 76 on ways to exitEmergency.Advanced Features in Non-Connect Plus Mode106English
Note:This feature is limited to radios with thisfunction enabled. Check with your dealer orsystem administrator for more information.Bluetooth OperationNote:If disabled via the CPS, all Bluetooth-relatedfeatures are disabled and the Bluetooth devicedatabase is erased.This feature allows you to use your radio with aBluetooth-enabled device (accessory) via a wirelessBluetooth connection. Your radio supports bothMotorola and COTS (Commercially available Off-The-Shelf) Bluetooth-enabled devices.Bluetooth operates within a range of 10 meters (32feet) line of sight. This is an unobstructed pathbetween your radio and your Bluetooth-enableddevice.It is not recommended that you leave your radiobehind and expect your Bluetooth-enabled device towork with a high degree of reliability when they areseparated.At the fringe areas of reception, both voice and tonequality will start to sound “garbled” or “broken”. Tocorrect this problem, simply position your radio andBluetooth-enabled device closer to each other (withinthe 10-meter/32 feet defined range) to re-establishclear audio reception. Your radio’s Bluetooth functionhas a maximum power of 2.5 mW (4 dBm) at the 10-meter/32 feet range.Your radio can support up to 3 simultaneousBluetooth connections with Bluetooth-enableddevices of unique types. For example, a headset, ascanner, and a PTT-Only Device (POD). Multipleconnections with Bluetooth-enabled devices of thesame type are not supported.Refer to your respective Bluetooth-enabled device’suser manual for more details on your Bluetooth-enabled device’s full capabilities.Turning Bluetooth On and Off1 to access the menu.2 or to Bluetooth and press toselect.Advanced Features in Non-Connect Plus Mode107English
3 or to My Status and press toselect.The display shows On and Off. The current statusis indicated by a .4Do one of the following:• or to On and press to select.The display shows On and a appears left ofthe selected status.• or to Off and press to select.The display shows Off and a appears left ofthe selected status.Finding and Connecting to a Bluetooth DeviceDo not turn off your Bluetooth-enabled device duringthe finding and connecting operation as this cancelsthe operation.1Turn on your Bluetooth-enabled device and placeit in pairing mode. Refer to respective Bluetooth-enabled device’s user manual.2On your radio, press to access the menu.3 or to Bluetooth and press toselect.4 or to Devices and press toselect.5Do one of the following:• or to the required device and press to select.• or to Find Devices to locateavailable devices. or to the requireddevice and press to select.6 or to Connect and press toselect.Display shows Connecting to <Device>. YourBluetooth-enabled device may require additionalsteps to complete the pairing. Refer to respectiveBluetooth-enabled device’s user manual.Advanced Features in Non-Connect Plus Mode108English
If successful, the radio display shows <Device>Connected. A tone sounds and appears besidesthe connected device. The Bluetooth Connected iconappears on the status bar.If unsuccessful, the radio display shows ConnectingFailed.Note:If pin code is required, use the same entrymethod as Step 2 in Accessing the Radio fromPassword on page 170.Finding and Connecting from a Bluetooth Device(Discoverable Mode)Do not turn off your Bluetooth or your radio during thefinding and connecting operation as this may cancelthe operation.1Turn Bluetooth On.See Turning Bluetooth On and Off on page 107.2 to access the menu.3 or to Bluetooth and press toselect.4 or to Find Me and press toselect.Your radio can now be found by other Bluetooth-enabled devices for a programmed duration. Thisis called Discoverable Mode.5Turn on your Bluetooth-enabled device and pair itwith your radio.Refer to respective Bluetooth-enabled device’suser manual.Disconnecting from a Bluetooth Device1On your radio, press to access the menu.2 or to Bluetooth and press toselect.3 or to Devices and press toselect.4 or to the required device and press to select.Advanced Features in Non-Connect Plus Mode109English
5 or to Disconnect and press toselect.Display shows Disconnecting from <Device>.Your Bluetooth-enabled device may requireadditional steps to disconnect. Refer to respectiveBluetooth-enabled device’s user manual.The radio display shows <Device> Disconnected. Apositive indicator tone sounds and disappearsbeside the connected device. The BluetoothConnected icon disappears on the status bar.Switching Audio Route between Internal Radio Speakerand Bluetooth DeviceYou can toggle audio routing between internal radiospeaker and external Bluetooth-enabled accessory.Press the programmed Bluetooth Audio Switchbutton.•A tone sounds and display shows Route Audioto Radio.•A tone sounds and display shows Route Audioto Bluetooth.Viewing Device Details1 to access the menu.2 or to Bluetooth and press toselect.3 or to Devices and press toselect.4 or to the required device and press to select.5 or to View Details and press to select.Deleting Device NameYou can remove a disconnected device from the listof Bluetooth-enabled devices.1 to access the menu.Advanced Features in Non-Connect Plus Mode110English
2 or to Bluetooth and press toselect.3 or to Devices and press toselect.4 or to the required device and press to select.5 or to Delete and press toselect.The display shows Device Deleted.Bluetooth Mic GainAllows control of the connected Bluetooth-enableddevice’s microphone gain value.1 to access the menu.2 or to Bluetooth and press toselect.3 or to BT Mic Gain and press toselect.4 or to the BT Mic Gain type and thecurrent values.To edit values, press to select.5 or to increase or to decrease valuesand press to select.Notification ListYour radio has a Notification List that collects all your“unread” events on the channel, such as unread textmessages, telemetry messages and missed calls.Unread Job Tickets are also stored in the notificationlist.The Notification icon appears on the status bar whenthe Notification List has one or more events.For TMS and missed call/call alert notification events,the maximum number are 30 TMS and 10 missedcalls/call alerts. This maximum number depends onAdvanced Features in Non-Connect Plus Mode111English
individual feature (job tickets or TMS or missed calls/call alerts) list capability.Note:After the events are read, they are removedfrom the Notification List.Accessing the Notification List1 to access the menu.2 or to Notification and press to select.3 or to the required event and press to select.Long press to return to the Home Screen.Auto-Range Transponder System (ARTS) ARTS is an analog-only feature designed to informyou when your radio is out-of-range of other ARTS-equipped radios.ARTS-equipped radios transmit or receive signalsperiodically to confirm that they are within range ofeach other. Your dealer can program your radio totransmit or receive the ARTS signal.Your radio provides indications of states as follows:•First-Time Alert – A tone sounds and the displayshows In Range after the channel alias.•ARTS-in-Range Alert – A tone sounds, ifprogrammed, and the display shows In Rangeafter the channel alias.•ARTS-Out-of-Range Alert – A tone sounds, theLED rapidly blinks red, and the display alternatesbetween Out of Range and the home screen.Over-the-Air-Programming (OTAP)Your radio can be updated by your dealer remotely,via OTAP, without needing to be physicallyconnected. Additionally, some settings can also beconfigured via OTAP.While undergoing OTAP, the LED blinks green.Advanced Features in Non-Connect Plus Mode112English
Note:When the radio is receiving high volume data,the High Volume Data icon appears andchannel is busy. A PTT button press at thistime may cause a negative tone to sound.Once the programming is complete, depending onyour radio’s configuration:•A tone sounds, the display shows UpdatingRestarting, and your radio restarts (powers offand on again).•Select between Restart Now or Postpone.Selecting Postpone allows your radio to return tothe previous display, with an OTAP Timer iconvisible, for a period of time before the automaticrestart occurs.Upon power up after the automatic restart occurs, thedisplay shows Sw Update Completed if the OTAPupdate is successful or Sw Update Failed if theOTAP update is unsuccessful.See Software Update on page 138 for your updatedsoftware version.Wi-Fi OperationWi-Fi® is a registered trademark of Wi-Fi Alliance®.Note:This feature is applicable to XPR 5550e/XPR5580e only.This feature allows you to setup and connect to a Wi-Fi® network. Wi-Fi supports updates for radiofirmware, codeplug, and resources such as languagepacks and voice announcement.Turning Wi-Fi On or OffNote:This feature is applicable to XPR 5550e/XPR5580e only.The programmed Wi-Fi On or Off button isassigned via CPS. Check with your dealer orsystem administrator to determine how yourradio has been programmed.You can turn on or turn off Wi-Fi® by performing oneof the following actions.•Press the programmed Wi-Fi On or Off button.Voice Announcement sounds Turning On Wi-Fi orTurning Off Wi-Fi.•Access this feature via the menu.a) Press to access the menu.Advanced Features in Non-Connect Plus Mode113English
b) Press or to WiFi and press to select.c) Press or to WiFi Status andpress to select.Press to turn on Wi-Fi. The display shows beside Enabled.Press to turn off Wi-Fi. The disappearsfrom beside Enabled.Connecting to a Network Access PointNote:This feature is applicable to XPR 5550e/XPR5580e only.When you turn on Wi-Fi®, the radio scans andconnects to a network access point.You can also connect to a network access point viathe menu.1Press to access the menu.2Press or to WiFi and press toselect.3Press or to Networks and press to select.4Press or to a network access pointand press to select.5Press or to Connect and press to select.6Enter the password and press .When the connection is successful, the radiodisplays a notice and the network access point issaved into the profile list.Refreshing the Network ListNote:This feature is applicable to XPR 5550e/XPR5580e only.Advanced Features in Non-Connect Plus Mode114English
•Perform the following actions to refresh thenetwork list.a) Press to access the menu.b) Press or to WiFi and press to select.c) Press or to Networks and press to select.When you enter the Networks menu, the radioautomatically refreshes the network list.•If you are already in the Networks menu, performthe following action to refresh the network list.a) Press or to Refresh and press to select.The radio refreshes and displays the latestnetwork list.Adding a NetworkNote:This feature is applicable to XPR 5550e/XPR5580e only.If a preferred network is not in the available networklist, perform the following actions to add a network.1Press to access the menu.2Press or to WiFi and press toselect.3Press or to Networks and press to select.4Press or to Add Network and press to select.5Enter the Service Set Identifier (SSID) and press.6Press or to Open and press toselect.7Enter the password and press .Advanced Features in Non-Connect Plus Mode115English
The radio displays to indicate that thenetwork is successfully saved.Viewing Details of Network Access PointsNote:This feature is applicable to XPR 5550e/XPR5580e only.Perform the following actions to view details ofnetwork access points.1Press to access the menu.2Press or to WiFi and press toselect.3Press or to Networks and press to select.4Press or to a network access pointand press to select.5Press or to View Details and press to select.For a connected network access point, the ServiceSet Identifier (SSID), Security Mode, MediaAccess Control (MAC) address, and InternetProtocol (IP) address are displayed.For a non-connected network access point, theService Set Identifier (SSID) and Security Modeare displayed.Removing Network Access PointsNote:This feature is applicable to XPR 5550e/XPR5580e only. Enterprise network access pointsthat are added via CPS can only be removedvia CPS.Perform the following actions to remove networkaccess points from the profile list.1Press to access the menu.Advanced Features in Non-Connect Plus Mode116English
2Press or to WiFi and press toselect.3Press or to Networks and press to select.4Press or to the selected networkaccess point and press to select.5Press or to Remove and press toselect.6Press or to Yes and press toselect.The radio displays to indicate that theselected network access point is successfullyremoved.Third Party Peripherals Connection ModesYou can select one of the third party peripheralsconnection modes:• Motorola• PC and Audio• Data Accessory• Telemetry• Generic1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Cable Type and press toselect.5 or to the required connection modeand press to select.The display shows the selected connection mode.The screen automatically returns to the previousmenu.Advanced Features in Non-Connect Plus Mode117English
Note:You cannot change the connection modewhile the cable of the third party peripheralis still attached to your radio.UtilitiesSetting the Squelch LevelYou can adjust your radio's squelch level to filter outunwanted calls with low signal strength or channelsthat have a higher than normal background noise.Normal is the default. Tight filters out (unwanted)calls and/or background noise; however, calls fromremote locations may also be filtered out.Note:This feature is not applicable in Citizens Bandchannels that are in the same frequency.Press the programmed Squelch button to togglesquelch level between normal and tight. Follow theprocedure described next to access this feature viathe radio’s menus.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Squelch and press toselect.5 or to the required setting and press to select. appears besides selected setting. Screenreturns to the previous menu.Setting the Power LevelNote:This feature is not applicable in Citizens Bandchannels that are in the same frequency.You can customize the power setting of the radio tohigh or low for each channel.Advanced Features in Non-Connect Plus Mode118English
High enables communication with radios located at aconsiderable distance from you. Low enablescommunication with radios in closer proximity.Press the programmed Power Level button to toggletransmit power level between high and low. Followthe procedure described next to access this featurevia the radio menu.1Press to access the menu.2Press or to Utilities and press to select.3Press or to Radio Settings andpress to select.4Press or to Power and press toselect.5Press or to the required setting andpress to select. appears beside selected setting. At any time,long press to return to the Home screen.Screen returns to the previous menu.Turning the Option Board Feature(s) On or OffA channel can support up to 6 option board features.Refer to your dealer or system administrator for moreinformation.Press the programmed Option Board Featurebutton to toggle the feature on or off.Identifying Cable TypeYou can select the type of cable your radio uses.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.Advanced Features in Non-Connect Plus Mode119English
4 or to Cable Type and press toselect.5The current cable type is indicated by a .Turning the Voice Operating Transmission (VOX)Feature On or OffThis feature allows you to initiate a hands-free voiceactivated call on a programmed channel. The radioautomatically transmits, for a programmed period,whenever the microphone on the VOX-capableaccessory detects voice.Note:This feature is not applicable in Citizens Bandchannels that are in the same frequency.Pressing the PTT button during radio operation willdisable VOX. To re-enable VOX, do one of thefollowing:• Turn the radio off and power it on again.• Change the channel via the Scroll Up/Downbuttons.• Change the channel via Volume/Channel Knob.• Press the programmed VOX button to toggle thefeature on or off.• Follow the steps described next to access thisfeature via the radio menu.If the Talk Permit Tone feature is enabled (see Turning the Talk Permit Tone On or Off on page122), use a trigger word to initiate the call. Wait forthe Talk Permit Tone to finish before speaking clearlyinto the microphone.Note:Turning this feature on or off is limited toradios with this function enabled. Check withyour dealer or system administrator for moreinformation.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to VOX and press to select.Advanced Features in Non-Connect Plus Mode120English
5Press to disable/enable VOX.Turning the Radio Tones/Alerts On or OffYou can enable and disable all radio tones and alerts(except for the incoming Emergency alert tone) ifneeded.Press the programmed All Tones/Alerts button totoggle all tones on or off, or follow the proceduredescribed next to access this feature via the radiomenu.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Tones/Alerts and press to select.5 or to All Tones and press toselect.6Press to enable/disable all tones and alerts.The display shows beside Enabled.The disappears from beside Enabled.Setting the Tone Alert Volume Offset LevelYou can adjust the Tone Alert Volume Offset level ifneeded. This feature adjusts the volume of the tones/alerts, allowing it to be higher or lower than the voicevolume.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.Advanced Features in Non-Connect Plus Mode121English
4 or to Tones/Alerts and press to select.5 or to Vol. Offset and press toselect.6 or to the required volume value.The radio sounds a feedback tone with eachcorresponding volume value.7Do one of the following:•Press to keep the required displayedvolume value.•Press to exit without changing the currentvolume offset settings.Turning the Talk Permit Tone On or OffYou can enable and disable the Talk Permit Tone ifneeded.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Tones/Alerts and press to select.5 or to Talk Permit and press toselect.6Press to enable/disable the Talk PermitTone.The display shows beside Enabled.The disappears from beside Enabled.Turning the Power Up Alert Tone On or OffYou can enable and disable the Power Up Alert Toneif needed.Advanced Features in Non-Connect Plus Mode122English
1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Tones/Alerts and press to select.5 or to Power Up and press toselect.6Press to enable/disable the Power Up AlertTone.The display shows beside Enabled.The disappears from beside Enabled.Setting the Text Message Alert ToneYou can customize your radio’s text message alerttone to Momentary or Repetitive for each entry in theContacts list.1 to access the menu.2 or to Contacts and press toselect.3 or to the required subscriber alias orID and press to select.4 or to Message Alert and press to select.The display shows Momentary and Repetitive.5 or to the required setting and press to enable. appears besides selected setting.Advanced Features in Non-Connect Plus Mode123English
Changing the Display ModeYou can change radio’s display mode between Dayor Night, as needed. This affects the color palette ofthe display.Change the Display Mode:RadioControlStepsProgram-med Dis-playModeButtonPress the programmed DisplayMode button.Menu 1 to access the menu.2 or to Utilities andpress to select.3 or to Radio Set‐tings and press to select.RadioControlSteps4 or to Display andpress to select.The display shows Day Mode andNight Mode.5 or to the required set-ting and press to enable. appears besides selected setting.Adjusting the Display BrightnessYou can adjust the display brightness of the radio asneeded.Note:Display brightness cannot be adjusted whenAuto Brightness is enabled.Adjust the Display Brightness by performing one ofthe following actions:Advanced Features in Non-Connect Plus Mode124English
RadioControlStepsProgram-med Dis-playBright-nessButton1Press the programmed Bright-ness button.2Decrease display brightness bypressing or increase the dis-play brightness by pressing .Select from setting of 1 to 8. Press to confirm your entry.Menu 1 to access the menu.2 or to Utilities andpress to select.3 or to Radio Settingsand press to select.4 or to Brightness andpress to select.RadioControlStepsThe display shows a progress bar.5Decrease display brightness bypressing or increase the dis-play brightness by pressing .Select from setting of 1 to 8. Press to confirm your entry.LanguageYou can set your radio display to be in your requiredlanguage.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.Advanced Features in Non-Connect Plus Mode125English
4 or to Languages and press toselect.5 or to the required language and press to enable. appears beside selectedlanguage.Turning Horns/Lights On or OffThis feature needs to be installed through your radio’srear accessory connector by your dealer.Your radio is able to notify you of an incoming call viathe horns and lights feature. When activated, anincoming call sounds your vehicle's horn and turns onits lights.Press the programmed Horns/Lights button to togglehorns and light feature on or off.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Horn/Lights and press toselect.5Press to enable/disable Horns/Lights.The display shows beside Enabled.The disappears from beside Enabled.Turning the LED Indicator On or OffYou can enable and disable the LED Indicator ifneeded.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.Advanced Features in Non-Connect Plus Mode126English
4 or to LED Indicator and press to select.5Press to enable/disable the LED Indicator.The display shows beside Enabled.The disappears from beside Enabled.Turning the Public Address System On or OffYou can enable and disable the radio’s internal publicaddress (PA) system.Press the programmed PA On/Off button to togglethe feature on or off.Turning the External Public Address System On or OffYou can enable or disable the audio routing betweenthe connected public address (PA) loudspeakeramplifier and the radio’s internal public address (PA)system.Press the programmed Ext PA On/Off button totoggle the feature on or off.Setting Dual Knob Operation PreferenceYour radio has a dual-purpose Volume/ChannelKnob. Disabling the dual-purpose option sets theknob to work as a Volume Knob only.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Dual Knob and press toselect.5The display shows Volume Only and Volume &Ch. or to the required setting andpress to select. appears beside selected setting.Screen returns to the previous menu.Advanced Features in Non-Connect Plus Mode127English
Turning the Introduction Screen On or OffYou can enable and disable the Introduction Screen ifneeded.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Display and press toselect.5 or to Intro Screen and press to select.6Press to enable/disable the IntroductionScreen.The display shows beside Enabled.The disappears from beside Enabled.Turning the Voice Announcement On or OffThis feature enables the radio to audibly indicate thecurrent Zone or Channel the user has assigned, orprogrammable button press. This audio indicator canbe customized per customer requirements. This istypically useful when the user is in a difficult conditionto read the content shown on the display.Setting the Text-to-Speech FeatureNote:The Text-to-Speech feature can only beenabled via the MOTOTRBO CustomerProgramming Software. If enabled, the VoiceAnnouncement feature is automaticallydisabled, and vice versa. Check with yourdealer or system administrator for moreinformation.This feature enables the radio to audibly indicate thefollowing features:• Current Channel• Current Zone• Programmed button feature on or offAdvanced Features in Non-Connect Plus Mode128English
• Content of received text messages• Content of received Job TicketsThis audio indicator can be customized per customerrequirements. This is typically useful when the user isin a difficult condition to read the content shown onthe display.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Voice Announcement and press to select.5 or to any of the following features andpress to select.You can also use or to change the selectedoption.•All•Messages•Job Tickets•Channel•Zone•Program Button appears beside the selected setting.Call Forwarding You can enable your radio to automatically forwardvoice calls to another radio.1 to access the menu.2 or to Utilities and press toselect.3 or to Call Forward and press to select.4Do one of the following:Advanced Features in Non-Connect Plus Mode129English
•Press to enable Call Forwarding. Thedisplay shows beside Enabled.•Press to disable Call Forwarding. The disappears from beside Enabled.Menu TimerSet the period of time your radio stays in the menubefore it automatically switches to the Home screen.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Display and press toselect.5 or to Menu Timer and press toselect.6 or to the required setting and press to select.Analog Mic AGC (Mic AGC-A)This feature controls the your radio's microphone gainautomatically while transmitting on an analog system.It suppresses loud audio or boosts soft audio to apreset value in order to provide a consistent level ofaudio.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Mic AGC-A and press toselect.5Do one of the following:Advanced Features in Non-Connect Plus Mode130English
•Press to enable Mic AGC-A. The displayshows beside Enabled.•Press to disable Mic AGC-A. The disappears from beside Enabled.Digital Mic AGC (Mic AGC-D)This feature controls the your radio's microphone gainautomatically while transmitting on a digital system. Itsuppresses loud audio or boosts soft audio to apreset value in order to provide a consistent level ofaudio.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Mic AGC-D and press toselect.5Do one of the following:•Press to enable Mic AGC-D. The displayshows beside Enabled.•Press to disable Mic AGC-D. The disappears from beside Enabled.Intelligent AudioYour radio can automatically adjust its audio volumeto overcome background noise in the environment,inclusive of all stationary and non-stationary noisesources. This feature is a Receive-only feature anddoes not affect Transmit audio.Note:This feature is not applicable during aBluetooth session.Toggle Intelligent Audio On or Off.RadioControlStepsProgram-med In-telligentPress the programmed IntelligentAudio button.Advanced Features in Non-Connect Plus Mode131English
RadioControlStepsAudioButtonMenu 1 to access the menu.2 or to Radio Set‐tings and press to select.3 or to Radio Set‐tings and press to select.4 or to IntelligentAudio and press to select.5Do one of the following:•Press to enable Intelli-gent Audio. The display shows beside Enabled.RadioControlSteps•Press to disable Intelli-gent Audio. The disappearsfrom beside Enabled.Turning the Acoustic Feedback Suppressor Feature Onor Off This feature allows you to minimize acoustic feedbackin received calls.Toggle the Acoustic Feedback SuppressorFeature On or Off by performing one of thefollowing actions:RadioControlStepsProgram-medAcousticFeedbackSuppres-sor ButtonPress the programmed AcousticFeedback Suppressor button.Advanced Features in Non-Connect Plus Mode132English
RadioControlStepsMenu 1 to access the menu.2 or to Utilities andpress to select.3 or to Radio Set‐tings and press to select.4 or to AF Suppressorand press to select.5Do one of the following:•Press to enable Acous-tic Feedback Suppressor. Thedisplay shows beside Ena-bled.•Press to disable Acous-tic Feedback Suppressor. The disappears from beside En-abled.Setting the Audio AmbienceYou can customize the audio ambience of the radioaccording to your environment.Default enables the default factory settings.Loud enables Noise Suppressor and increasesspeaker loudness for use in noisy surroundings.Work Group enables AF Suppressor and disablesAGC for use when a group of radios are near to eachother.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Audio Ambience and press to select.Advanced Features in Non-Connect Plus Mode133English
5 or to the required setting and press to select. appears beside the selected setting.Setting the Audio ProfilesYou can customize the audio profiles of the radioaccording to your preference.Default disables the previously selected audioprofile and the radio’s audio profile returns to normal.Level 1, Level 2, and Level 3 are audio profilesintended to compensate for noise-induced hearingloss that is typical for adults in their 40’s, 50’s, and60’s or over.Treble Boost, Mid Boost, and Bass Boost are fora tinnier sound, a more nasal sound, and a deepersound.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Audio Profiles and press to select.5 or to the required setting and press to select. appears beside the selected setting.Turning GPS/GNSS On or OffGlobal Navigation Satellite System (GNSS) is asatellite navigation system that determines the radio’sprecise location. GNSS includes Global PositioningSystem (GPS), Global Navigation Satellite System(GLONASS), and BeiDou Navigation Satellite System(BDS).Press the programmed GPS/GNSS button to togglethe feature on or off.Advanced Features in Non-Connect Plus Mode134English
Note:Selected radio models may offer GPS,GLONASS, and BDS. GNSS constellation isconfigured via CPS. Check with your dealer orsystem administrator to determine how yourradio has been programmed.1Press to access the menu.2Press or to Utilities and press to select.3Press or to Radio Settings andpress to select.4Press or to GPS and press toselect.5Press to enable/disable GPS/GNSS.The display shows beside Enabled.The disappears from beside Enabled.See Checking the GPS/GNSS Information on page137 for details on retrieving GPS/GNSS information.Flexible Receive ListFlexible Receive List is a digital-only (currentlysupported in Capacity Plus and Linked Capacity Plus)feature that allows you to add, delete or edit memberson the receive talkgroup list. Your radio can support amaximum of 16 members in the list.Turning the Flexible Receive List On or OffYou can enable and disable the Flexible Receive Listif needed.Enable the Flexible Receive List by performingone of the following actions:Radio Con-trolStepsProgrammedFlexible Re-ceive ListButtonPress the programmed FlexibleReceive List button.Menu 1 to access the menu.Advanced Features in Non-Connect Plus Mode135English
Radio Con-trolSteps2 or to Flexible RxList and press to select.3Press to enable or disa-ble the Flexible Receive Listfeature.PreviousdisplayCurrent displayTurn On Flexible Rx List OnTurn Off Flexible Rx List OffAccessing General Radio InformationYour radio contains information on the following:• Radio Alias and ID• Firmware and Codeplug Versions• GPS Information• Software Update• Site InformationPress at any time to return to the previousscreen or long press to return to the Homescreen. The radio exits the current screen once theinactivity timer expires.Checking the Radio Alias and IDThis feature displays the ID of your radio.Press the programmed Radio Alias and ID button tocheck your radio alias and ID. You hear a positiveindicator tone.Follow the procedure described next to access thisfeature via the radio screen.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to My ID and press to select.Advanced Features in Non-Connect Plus Mode136English
The first line of the display shows the radio alias.The second line of the display shows the radio ID.You can also press the programmed Radio Alias andID button to return to the previous screen.Checking the Firmware Version and CodeplugVersionDisplays the firmware version on your radio.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to Versions and press toselect.The display shows the current firmware andcodeplug versions.Checking the GPS/GNSS InformationDisplays the GPS/GNSS information on your radio,such as values of:• Latitude• Longitude• Altitude• Direction• Velocity• Horizontal Dilution of Precision (HDOP)• Satellites• Version1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to GPS Info and press toselect.Advanced Features in Non-Connect Plus Mode137English
5 or to the required item and press to select.The display shows the requested GPS/GNSSinformation.See Turning GPS/GNSS On or Off on page 134 fordetails on GPS/GNSS.Software UpdateDisplays the date and time of the latest softwareupdate carried out via Over-the-Air Programming.Note:Software Update menu is only available afterat least one successful OTAP session.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to SW Update and press toselect.The display shows the date and time of the latestsoftware update.See Over-the-Air-Programming (OTAP) on page 112for details on OTAP session.Site InformationDisplays the current Linked Capacity Plus site nameyour radio is on.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to Site Info and press toselect.The display shows the current Linked CapacityPlus site name.Advanced Features in Non-Connect Plus Mode138English
See Linked Capacity Plus on page 40 for details onLinked Capacity Plus.Advanced Features in Non-Connect Plus Mode139English
Keypad Microphone FeaturesUsing the KeypadYou can use the 3 x 4 alphanumeric keypad on the 4–Way Navigation Keypad Microphone (Motorola part numberRMN5127_) to access your radio’s features. You can use the keypad to enter subscriber aliases or IDs, and textmessages. Many characters require that you press a key multiple times. The next table shows the number of times akey needs to be pressed to generate the required character.Key Number of Times Key is Pressed1 2 3 4 5 6 7 8 9 10 11 12 131 . , ? ! @ & ' % — : * #A B C 2D E F 3G H I 4J K L 5M N O 6Keypad Microphone Features140English
Key Number of Times Key is Pressed1 2 3 4 5 6 7 8 9 10 11 12 13P Q R S 7T U V 8W X Y Z 90Note:Press to enter “0” and long press to activate the CAPS lock. Another long press to turn offthe CAPS lock.* ordel Note:Press during text entry to delete the character. Press during numeric entry to enter a “*”.# orspace Note:Press during text entry to insert a space. Press during numeric entry to enter a “#”. Longpress to change text entry method.Turning Keypad Tones On or OffYou can enable and disable keypad tones if needed.Keypad Microphone Features141English
1 to access the menu.2 or to Utilities and press to select.3 or to Radio Settings and press to select.4 or to Tones/Alerts and press to select.5 or to Keypad Tones and press to select.6Press to enable/disable keypad tones.The display shows beside Enabled.The disappears from beside Enabled.Additional Advanced FeaturesSelecting a Zone by Alias Search1 to access the menu.2 or to Zone and press to select.The current zone is displayed and indicated by a.3Key in the first character of the required zone.A blinking cursor appears.4Use the keypad to type the required zone. Press to move one space to the left. Press to moveKeypad Microphone Features142English
one space to the right. Press the key todelete any unwanted characters.Long press to change the text entry method.The first line of the display shows the charactersyou keyed in. The next lines of the display showthe shortlisted search results.Note:The alias search is case-insensitive. Ifthere are two or more zones with the samename, the radio displays the zone that islisted first in the zone list.5 to select.The display shows <Zone> Selectedmomentarily and returns to the selected zonescreen.Initiating a Radio Check by Manual Dial 1 to access the menu.2 or to Contacts and press toselect.3 or to Manual Dial and press toselect.4 or to Radio Number and press toselect.5Do one of the following:• If there was previously dialed ID, the IDappears along with a blinking cursor. Use thekeypad to edit the ID. Press to select.• Key in the subscriber alias or ID and press.6 or to Radio Check and press toselect.The display shows transitional mini notice,indicating the request is in progress. The greenLED lights up.7Wait for acknowledgement.If successful, a positive indicator tone sounds andthe display shows positive mini notice.Keypad Microphone Features143English
If unsuccessful, a negative indicator tone soundsand the display shows negative mini notice.Note:If the button is pressed when theradio is waiting for acknowledgement, atone sounds and the radio terminates allretries and exits Radio Check mode.Radio returns to the subscriber alias or ID screen.Initiating a Remote Monitor by Manual Dial 1 to access the menu.2 or to Contacts and press toselect.3 or to Manual Dial and press toselect.4 or to Radio Number and press toselect.5Do one of the following:• If there was previously dialed ID, the IDappears along with a blinking cursor. Use thekeypad to edit the ID. Press to select.• Key in the subscriber alias or ID and press.6 or to Remote Mon. and press toselect.The display shows transitional mini notice,indicating the request is in progress. The greenLED lights up.7Wait for acknowledgement.If successful, a positive indicator tone sounds andthe display shows positive mini notice. Your radiostarts playing audio from the monitored radio for aprogrammed duration and display shows Rem.Monitor. Once the timer expires, the radio soundsan alert tone and the LED turns off.If unsuccessful, a negative indicator tone soundsand the display shows negative mini notice.Keypad Microphone Features144English
Note:If the button is pressed when theradio is waiting for acknowledgement, atone sounds and the radio terminates allretries and exits Radio Check mode.Radio returns to the subscriber alias or ID screen.Making a Private Call by Manual Dial 1 to access the menu.2 or to Contacts and press toselect.3 or to Manual Dial and press toselect.4 or to Radio Number and press toselect.5Do one of the following:• If there was previously dialed ID, the IDappears along with a blinking cursor. Use thekeypad to edit the ID. Press to select.• Key in the subscriber alias or ID and press.6Press the PTT button to make the call. The greenLED lights up. The display show the destinationalias.7Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.8Release the PTT button to listen. When the targetradio responds, the green LED blinks.If the Channel Free Indication feature is enabled,you hear a short alert tone the moment the targetradio releases the PTT button, indicating thechannel is free for you to respond. Press the PTTbutton to respond.If there is no voice activity for a programmedperiod of time, the call ends.You hear a short tone. The display shows CallEnded.Keypad Microphone Features145English
Making a Phone Call by Manual Dial 1 to access the menu.2 or to Contacts and press toselect.3 or to Manual Dial and press toselect.4 or to Phone Number and press toselect.5Do one of the following:•The display shows Number:. The second lineof the display shows a blinking cursor. Use thekeypad to enter a telephone number and press to proceed.• If the access code was not preconfigured in theContacts list, the first line of the display showsAccess Code:. The second line of the displayshows a blinking cursor. Enter the access codeand press to proceed.The green LED lights up. The Phone Call iconappears in the top right corner. The first text lineshows the subscriber alias. The second text linedisplays the call status.If successful, the DTMF tone sounds. You hearthe dialing tone of the telephone user. The firsttext line shows the subscriber alias. The PhoneCall icon remains in the top right corner.If unsuccessful, a tone sounds and the displayshows Phone Call Failed. Your radio returns tothe Access Code input screen. If the access codewas preconfigured in the Contacts list, the radioreturns to the screen you were on prior to initiatingthe call.6Do one of the following:•Press to end the call.If deaccess code was not preconfigured in theContacts list, the first line of the display showsDe-Access Code:. The second line of thedisplay shows a blinking cursor. Enter thedeaccess code and press to proceed.The radio returns to the previous screen.Keypad Microphone Features146English
• Press One Touch Access button. The DTMFtone sounds. If the entry for the One TouchAccess button is empty, a negative indicatortone sounds.The DTMF tone sounds and the display showsEnding Phone Call.If successful, a tone sounds and the display showsCall Ended. Your radio returns to the Phone Callscreen.If unsuccessful, your radio returns to the PhoneCall screen. Repeat the step above or wait for thetelephone user to end the call.Note:When you press PTT button while in thePhone Contacts screen, a tone sounds andthe display shows Press OK to PlacePhone Call.When the telephone user ends the call, atone sounds and the display shows CallEnded.If the call ends while you are entering theextra digits requested by the Phone Call,your radio returns to the screen you wereon prior to initiating the call.During the channel access, press todismiss the call attempt and a tone sounds.During the call, when you press OneTouch Access button with the deaccesscode preconfigured or enter the deaccesscode as the input for extra digits, your radioattempts to end the call.During channel access and access/deaccess code or extra digits transmission,you radio responds to On/Off button,Volume Knob, and Channel Rocker only.A tone sounds for every invalid input.The access or deaccess code cannot bemore than 10 characters.Making a Phone Call with the One Touch AccessButton 1Press the programmed One Touch Accessbutton to make a Phone Call to the predefinedalias or ID.Keypad Microphone Features147English
If the entry for the One Touch Access button isempty, a negative indicator tone sounds.2If the access code was not preconfigured in theContacts list, the first line of the display showsAccess Code:. The second line of the displayshows a blinking cursor. Enter the access codeand to proceed.The green LED lights up. The Phone Call iconappears in the top right corner. The first text lineshows the subscriber alias. The second text linedisplays the call status.If successful, the DTMF tone sounds. You hearthe dialing tone of the telephone user. The firsttext line shows the subscriber alias. The PhoneCall icon remains in the top right corner.If unsuccessful, a tone sounds and the displayshows Phone Call Failed. Your radio returns tothe Access Code input screen. If the access codewas preconfigured in the Contacts list, the radioreturns to the screen you were on prior to initiatingthe call.3Do one of the following:•Press to end the call.If deaccess code was not preconfigured in theContacts list, the first line of the display showsDe-Access Code:. The second line of thedisplay shows a blinking cursor. Enter thedeaccess code and press to proceed.The radio returns to the previous screen.• Press One Touch Access button. The DTMFtone sounds. If the entry for the One TouchAccess button is empty, a negative indicatortone sounds.The DTMF tone sounds and the display showsEnding Phone Call.If successful, a tone sounds and the display showsCall Ended. Your radio returns to the Phone Callscreen.If unsuccessful, your radio returns to the PhoneCall screen. Repeat the step above or wait for thetelephone user to end the call.Note:During the channel access, press todismiss the call attempt and a tone sounds.Keypad Microphone Features148English
During the call, when you press OneTouch Access button with the deaccesscode preconfigured or enter the deaccesscode as the input for extra digits, your radioattempts to end the call.During channel access and access/deaccess code or extra digits transmission,you radio responds to On/Off button,Volume Knob, and Channel Rocker only.A tone sounds for every invalid input.The access or deaccess code cannot bemore than 10 characters.Making a Group, Private or All Call with theProgrammable Number Key The Programmable Number Key feature allows you tomake a Group, Private or All Call to a predefined aliasor ID easily. This feature can be assigned to all theavailable number keys on a keypad microphone.You can ONLY have one alias or ID assigned to anumber key, but you can have more than one numberkey associated to an alias or ID.When you are on the Home Screen:1Long press the programmed number key to makea Group, Private or All Call to the predefined aliasor ID.If the number key is not associated to an entry, anegative indicator tone sounds.2Press the PTT button to make the call.The green LED lights up. The Group/Private Callicon appears in the top right corner. The first textline shows the subscriber alias. The second textline displays the call status for a Private Call orAll Call for All Call.3Wait for one of the following tones to finish (ifenabled), and speak clearly into the microphone.• The Talk Permit Tone• the PTT Sidetone (Group Call only).4Release the PTT button to listen.When the target radio responds, the green LEDblinks. The display shows the destination alias.5 If the Channel Free Indication feature isenabled, you hear a short alert tone the momentthe transmitting radio releases the PTT button,Keypad Microphone Features149English
indicating the channel is free for you to respond.Press the PTT button to respond.If there is no voice activity for a predeterminedperiod of time, the call ends. Radio returns to thescreen you were on prior to initiating the call.For a Private Call, you hear a short tone when thecall ends.See Assigning an Entry to a ProgrammableNumber Key on page 66 for details on assigningan entry to a number key on the keypad.Making a Phone Call with the Programmable PhoneButton 1Press the programmed Phone button to enter intothe Phone Entry list.2 or to the required subscriber alias orID, and press to select.If the access code was not preconfigured in theContacts list, the first line of the display showsAccess Code:. The second line of the displayshows a blinking cursor. Enter the access codeand press the button to proceed.The first line of the display shows Calling. Thesecond line of the display shows the subscriberalias or ID, and the Phone Call icon.If successful, The DTMF tone sounds. You hearthe dialing tone of the telephone user. The first lineof the display shows the subscriber alias or ID,and the RSSI icon. The second line of the displayshows Phone Call and the Phone Call icon,If unsuccessful, a tone sounds and the displayshows Phone Call Failed. Your radio returns tothe Access Code input screen. If the access codewas preconfigured in the Contacts list, the radioreturns to the screen you were on prior to initiatingthe call.3Press the PTT to talk and release it to listen. TheRSSI icon disappears during transmission.4To enter extra digits, if requested by the PhoneCall, do one of the following.• Press any keypad key to begin the input of theextra digits. The first line of the display showsKeypad Microphone Features150English
Extra Digits:. The second line of the displayshows a blinking cursor. Enter the extra digitsand press the button to proceed. TheDTMF tone sounds and the radio returns to theprevious screen.• Press One Touch Access button. The DTMFtone sounds. If the entry for the One TouchAccess button is empty, a negative indicatortone sounds.5Press to end the call. If deaccess code wasnot preconfigured in the Contacts list, the first lineof the display shows De-Access Code:. Thesecond line of the display shows a blinking cursor.Enter the deaccess code and press toproceed. The radio returns to the previous screen.The DTMF tone sounds and the display showsEnding Phone Call.If successful, a tone sounds and the display showsPhone Call Ended. Your radio returns to thescreen you were on prior to initiating the call.If unsuccessful, your radio returns to the PhoneCall screen. Repeat the Step 5 or wait for thetelephone user to end the call.When you press the PTT button while in thePhone Contacts screen, as tone sounds and thedisplay shows Press OK to Place Phone Call.When the telephone user ends the call, a tonesounds and the display shows Phone CallEnded.If the call ends while you are entering the extradigits requested by the Phone Call, your radioreturns to the screen you were on prior to initiatingthe call.Note:During the channel access, press todismiss the call attempt and a tone sounds.During the call, when you press OneTouch Access button with the deaccesscode preconfigured or enter the deaccesscode as the input for extra digits, your radioattempts to end the call.Keypad Microphone Features151English
During channel access and access/deaccess code or extra digits transmission,you radio responds to On/Off button,Volume Knob, and Channel Rocker only.A tone sounds for every invalid input.The access or deaccess code cannot bemore than 10 characters.Making a Phone Call from Contacts 1 to access the menu.2 or to Contacts and press toselect.The entries are alphabetically sorted.3Do one of the following:• or to the required subscriber aliasor ID.• or to Manual Dial and press to select. or to Phone Number and press to select.The first line of the display shows PhoneNumber:. The second line of the display showsa blinking cursor. Use the keypad to enter atelephone number.4Press to select.If the entry selected is empty, a negative indicatortone sounds and the display shows Phone CallInvalid #.5 or to Call Phone and press toselect.If the access code was not preconfigured in theContacts list, the first line of the display showsAccess Code:. The second line of the displayshows a blinking cursor. Enter the access codeand press the button to proceed.The first line of the display shows Calling. Thesecond line of the display shows the subscriberalias or ID, and the Phone Call icon.Keypad Microphone Features152English
If successful, The DTMF tone sounds. You hearthe dialing tone of the telephone user. The first lineof the display shows the subscriber alias or ID,and the RSSI icon. The second line of the displayshows Phone Call and the Phone Call icon,If unsuccessful, a tone sounds and the displayshows Phone Call Failed. Your radio returns tothe Access Code input screen. If the access codewas preconfigured in the Contacts list, the radioreturns to the screen you were on prior to initiatingthe call.6Press the PTT button to talk and release it tolisten.The RSSI icon disappears during transmission.7To enter extra digits, if requested by the PhoneCall, do one of the following.• Press any keypad key to begin the input of theextra digits. The first line of the display showsExtra Digits:. The second line of the displayshows a blinking cursor. Enter the extra digitsand press the button to proceed. TheDTMF tone sounds and the radio returns to theprevious screen.• Press One Touch Access button. The DTMFtone sounds. If the entry for the One TouchAccess button is empty, a negative indicatortone sounds.8Press to end the call. If deaccess code wasnot preconfigured in the Contacts list, the first lineof the display shows De-Access Code:. Thesecond line of the display shows a blinking cursor.Enter the deaccess code and press toproceed. The radio returns to the previous screen.The DTMF tone sounds and the display showsEnding Phone Call.If successful, a tone sounds and the display showsPhone Call Ended. Your radio returns to thePhone Call screen.If unsuccessful, your radio returns to the PhoneCall screen. Repeat the Step 8 or wait for thetelephone user to end the call.When you press the PTT button while in thePhone Contacts screen, as tone sounds and thedisplay shows Press OK to Place Phone Call.Keypad Microphone Features153English
When the telephone user ends the call, a tonesounds and the display shows Phone CallEnded.If the call ends while you are entering the extradigits requested by the Phone Call, your radioreturns to the screen you were on prior to initiatingthe call.Note:During the channel access, press todismiss the call attempt and a tone sounds.During the call, when you press OneTouch Access button with the deaccesscode preconfigured or enter the deaccesscode as the input for extra digits, your radioattempts to end the call.During channel access and access/deaccess code or extra digits transmission,you radio responds to On/Off button,Volume Knob, and Channel Rocker only.A tone sounds for every invalid input.The access or deaccess code cannot bemore than 10 characters.Making a Group, Private, Phone or All Call by AliasSearch 1 to access the menu.2 or to Contacts and press toselect.The entries are alphabetically sorted.3Do one of the following:• or to the required subscriber aliasor ID.• or to Manual Dial and press to select. or to Phone Number and press to select.The first line of the display shows PhoneNumber:. The second line of the display showsa blinking cursor. Use the keypad to enter atelephone number.Keypad Microphone Features154English
4Press to select.If the entry selected is empty, a negative indicatortone sounds and the display shows Phone CallInvalid #.5 or to Call Phone and press toselect.If the access code was not preconfigured in theContacts list, the first line of the display showsAccess Code:. The second line of the displayshows a blinking cursor. Enter the access codeand press the button to proceed.The first line of the display shows Calling. Thesecond line of the display shows the subscriberalias or ID, and the Phone Call icon.If successful, the DTMF tone sounds. You hearthe dialing tone of the telephone user. The first lineof the display shows the subscriber alias or ID,and the RSSI icon. The second line of the displayshows Phone Call and the Phone Call icon,If unsuccessful, a tone sounds and the displayshows Phone Call Failed. Your radio returns tothe Access Code input screen. If the access codewas preconfigured in the Contacts list, the radioreturns to the screen you were on prior to initiatingthe call.6Press the PTT button to talk and release it tolisten.The RSSI icon disappears during transmission.7To enter extra digits, if requested by the PhoneCall, do one of the following.• Press any keypad key to begin the input of theextra digits. The first line of the display showsExtra Digits:. The second line of the displayshows a blinking cursor. Enter the extra digitsand press the button to proceed. TheDTMF tone sounds and the radio returns to theprevious screen.• Press One Touch Access button. The DTMFtone sounds. If the entry for the One TouchAccess button is empty, a negative indicatortone sounds.8Press to end the call. If deaccess code wasnot preconfigured in the Contacts list, the first lineof the display shows De-Access Code:. TheKeypad Microphone Features155English
second line of the display shows a blinking cursor.Enter the deaccess code and press toproceed. The radio returns to the previous screen.The DTMF tone sounds and the display showsEnding Phone Call.If successful, a tone sounds and the display showsPhone Call Ended. Your radio returns to thePhone Call screen.If unsuccessful, your radio returns to the PhoneCall screen. Repeat the Step 8 or wait for thetelephone user to end the call.When you press the PTT button while in thePhone Contacts screen, as tone sounds and thedisplay shows Press OK to Place Phone Call.When the telephone user ends the call, a tonesounds and the display shows Phone CallEnded.If the call ends while you are entering the extradigits requested by the Phone Call, your radioreturns to the screen you were on prior to initiatingthe call.Note:During the channel access, press todismiss the call attempt and a tone sounds.During the call, when you press OneTouch Access button with the deaccesscode preconfigured or enter the deaccesscode as the input for extra digits, your radioattempts to end the call.During channel access and access/deaccess code or extra digits transmission,you radio responds to On/Off button,Volume Knob, and Channel Rocker only.A tone sounds for every invalid input.The access or deaccess code cannot bemore than 10 characters.Viewing an Entry in the Scan List by Alias Search1 to access the menu.2 or to Scan and press to select.Keypad Microphone Features156English
3 or to Scan List and press toselect.4Key in the first character of the required alias.A blinking cursor appears.5Use the keypad to type the required alias.Press to move one space to the left.Press to move one space to the right.Press to delete any unwanted characters.Long press to change the text entry method.The first line of the display show the charactersyou keyed in. The next lines of the display showthe shortlisted search results.The alias search is case-insensitive. If there aretwo or more aliases with the same name, the radiodisplays the alias that is listed first in the Scan list.Editing the Scan ListAdding a New Entry to the Scan List1 to access the menu.2 or to Scan and press to select.3 or to Scan List and press toselect.4 or to Add Member and press toselect.5Key in the first character of the required alias.A blinking cursor appears.6Use the keypad to type the required alias.Press to move one space to the left.Press to move one space to the right.Press to delete any unwanted characters.Keypad Microphone Features157English
Long press to change the text entry method.The first line of the display show the charactersyou keyed in. The next lines of the display showthe shortlisted search results.The alias search is case-insensitive. If there aretwo or more aliases with the same name, the radiodisplays the alias that is listed first in the Scan list.7Press to select.8 or to the required priority level andpress to select.The display shows positive mini notice, followedimmediately by Add Another?.9Do one of the following:• or to Yes and press to select,to add another entry, and repeat Steps 5 to 8.• or to No and press to selectto save the current list.Deleting an Entry from the Scan List1 to access the menu.2 or to Scan and press to select.3 or to Scan List and press toselect.4Key in the first character of the required alias.A blinking cursor appears.5Use the keypad to type the required alias.Press to move one space to the left.Press to move one space to the right.Press to delete any unwanted characters.Long press to change the text entry method.The first line of the display show the charactersyou keyed in. The next lines of the display showthe shortlisted search results.Keypad Microphone Features158English
The alias search is case-insensitive. If there aretwo or more aliases with the same name, the radiodisplays the alias that is listed first in the Scan list.6Press to select.7 or to Delete and press toselect.8Do one of the following:• or to Yes and press to select,to delete the entry. The display shows positivemini notice.• or to No and press to selectto return to the previous screen.Repeat Steps 4 to 8 to delete other entries.After deleting all required aliases or IDs, longpress the button to return to the HomeScreen.Setting and Editing Priority for an Entry in theScan List1 to access the menu.2 or to Scan and press to select.3 or to Scan List and press toselect.4Key in the first character of the required alias.A blinking cursor appears.5Use the keypad to type the required alias.Press to move one space to the left.Press to move one space to the right.Press to delete any unwanted characters.Long press to change the text entry method.The first line of the display show the charactersyou keyed in. The next lines of the display showthe shortlisted search results.Keypad Microphone Features159English
The alias search is case-insensitive. If there aretwo or more aliases with the same name, the radiodisplays the alias that is listed first in the Scan list.6Press to select.7 or to Edit Priority and press to select.8 or to the required priority level andpress to select.The display shows positive mini notice beforereturning to the previous screen.The priority icon appears left of the name of themember.There is no priority icon if priority is set to None.Storing an Alias or ID from a Call List1 to access the menu.2 or to Call Log and press toselect.3 or to the required list and press to select.4 or to the required alias or ID and press to select.5 or to Store and press to select.A blinking cursor appears.6If needed, key in the alias for the ID and press to select.The display shows positive mini notice.You can also store an ID without an alias.Making a Call Alert by Manual Dial 1 to access the menu.Keypad Microphone Features160English
2 or to Contacts and press toselect.3 or to Manual Dial and press toselect.A blinking cursor appears.4Enter the subscriber ID you want to send the CallAlert to and press .5 or to Call Alert and press toselect.The display shows Call Alert and thesubscriber alias or ID, indicating that the Call Alerthas been sent.The green LED lights up when your radio issending the Call Alert.If the Call Alert acknowledgement is received, thedisplay shows positive mini notice.If the Call Alert acknowledgement is not received,the display shows negative mini notice.RSSI ValuesYour radio shows the Received Signal StrengthIndicator (RSSI) icon at the top of your display. Thisfeature allows you to view the RSSI values.When you are on the Home screen:1Press three times ( _ _ ) and immediatelypress three times ( _ _ ), all within 5seconds.The display shows the current RSSI values.2Long press the button to return to the Homescreen.See Display Icons on page 31 for details on theRSSI Icon.Text Messaging The maximum length of characters for sending a textmessage, including the subject line (seen whenreceiving message from an e-mail application),depends on CPS configuration which can beconfigured up to maximum 280 characters. Your radioKeypad Microphone Features161English
can receive a text message with maximum length of280 characters.If user forwards a text message with characters morethan the maximum length, the text message will betruncated to the maximum length.Note:The radio exits the current screen once theinactivity timer expires. Any text message inthe writing/editing screen is automaticallysaved to the Drafts folder.Writing and Sending a Text Message1Access the Text Message feature.Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Compose and press toselect.3Use the keypad to type your message.Press to move one space to the left.Press or the key to move one space tothe right.Press to delete any unwanted characters.4Press once message is composed.5Do one of the following:• or to the required or ID and press to select.• or to Manual Dial and press to select. Key in the subscriber ID and press.• to edit the message.Keypad Microphone Features162English
again to discard the message or save itto the Drafts folder.The display shows transitional mini notice,confirming your message is being sent.If the message is sent, a tone sounds and thedisplay shows positive mini notice.If the message is not sent, a low tone sounds andthe display shows negative mini notice.Note:If the text message fails to send, the radioreturn you to the Resend option screen(see Managing Fail-to-Send TextMessages on page 85).Replying to Text Messages from the Inbox1Access the Text Message feature.Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Radio Con-trolsStepsMenu 1 to access the menu.2 or to Messagesand press to select.2 or to Inbox and press to select.3 or to the required message and press to select.A subject line may be shown if the message isfrom an e-mail application.4Press once more to access the additionaloptions.5 or to Reply and press to select.A blinking cursor appears.6Use the keypad to type your message.Keypad Microphone Features163English
Press to move one space to the left.Press to move one space to the right.Press to delete any unwanted characters.Long press to change text entry method.7Press once message is composed.The display shows transitional mini notice,confirming your message is being sent.If the message is sent, a tone sounds and thedisplay shows positive mini notice.If the message is not sent, a low tone sounds andthe display shows negative mini notice.Note:If the text message fails to send, the radioreturn you to the Resend option screen(see Managing Fail-to-Send TextMessages on page 166).If a subject line is present (for messagesreceived from an e-mail application), youcannot edit it.Editing a Quick Reply Message1Access the Text Message feature.Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Quick Reply and press toselect.3 or to the required Quick Text andpress to select.Keypad Microphone Features164English
A blinking cursor appears.4Use the keypad to type your message.Press to move one space to the left.Press to move one space to the right.Press to delete any unwanted characters.Long press to change text entry method.5Press once message is composed.The display shows transitional mini notice,confirming your message is being sent.If the message is sent, a tone sounds and thedisplay shows positive mini notice.If the message is not sent, a low tone sounds andthe display shows negative mini notice.Note:If the text message fails to send, the radioreturn you to the Resend option screen(see Managing Fail-to-Send TextMessages on page 166).Accessing the Drafts FolderYou can save a text message to send it at a latertime.If a PTT button press or a mode change causes theradio to exit the text message writing/editing screenwhile you are in the process of writing or editing a textmessage, your current text message is automaticallysaved to the Drafts folder.The most recent saved text message is always addedto the top of the Drafts list. See Accessing the DraftsFolder on page 84.Note:Long press at any time to return to theHome screen.Editing and Sending a Saved Text Message1Press again while viewing the message.2 or to Edit and press to select.Keypad Microphone Features165English
A blinking cursor appears.3Use the keypad to type your message.Press to move one space to the left.Press to move one space to the right.Press to delete any unwanted characters.Long press to change text entry method.4Press once message is composed.5Do one of the following:• or to the required alias or ID andpress to select.• or to Manual Dial and press to select.The first line of the display shows RadioNumber:.Key in the subscriber alias or ID and press.The display shows transitional mini notice,confirming your message is being sent.If the message is sent, a tone sounds and thedisplay shows positive mini notice.If the message is not sent, a low tone sounds andthe display shows negative mini notice.Note:If the text message fails to send, it ismoved to the Sent Items folder and markedwith a Send Failed icon.Managing Fail-to-Send Text MessagesIf the message fails to send, the radio returns you tothe Resend option screen. You can select one of thefollowing options while at the Resend option screen:• Forward• EditForwarding a Text Message by Manual DialSelect Forward to send the message to anothersubscriber/group alias or ID.Keypad Microphone Features166English
1 or to Forward and press toselect.2 or to Manual Dial and press toselect.The first line of the display shows Radio Number:3Key in the subscriber ID and press .The display shows transitional mini notice,confirming your message is being sent.If the message is sent, a tone sounds and thedisplay shows positive mini notice.If the message is not sent, a low tone sounds andthe display shows negative mini notice.Editing a Text MessageSelect Edit to edit the message before sending it.Note:If a subject line is present (for messagesreceived from an e-mail application), youcannot edit it.1 or to Edit and press to select.A blinking cursor appears.2Use the keypad to type the required alias.Press to move one space to the left.Press to move one space to the right.Press to delete any unwanted characters.Long press to change the text entry method.3Press once message is composed.4Do one of the following:• or to the required alias or ID andpress to select.• or to Manual Dial and press to selectThe first line of the display shows Radio Number:.Keypad Microphone Features167English
5Key in the subscriber ID and press .The display shows transitional mini notice,confirming your message is being sent.If the message is sent, a tone sounds and thedisplay shows positive mini notice.If the message is not sent, a low tone sounds andthe display shows negative mini notice.Dual Tone Multi Frequency (DTMF)The Dual Tone Multi Frequency (DTMF) featureallows the radio to operate in a radio system with aninterface to telephone systems.To initiate a DTMF call.1Press and hold the PTT button.2Enter the desired number, or .You can turn off the DTMF tone by disabling allradio tones and alerts (see Turning the RadioTones/Alerts On or Off on page 121).Security Radio Disable via Manual Dial1 to access the menu.2 or to Contacts and press toselect.The entries are alphabetically sorted.3 or to Manual Dial and press toselect.4 or to Private Call and press to select.The first line of the display shows Radio Number:.5Key in the subscriber ID and press .6 or to Radio Disable and press to select.Keypad Microphone Features168English
The display shows transitional mini notice,indicating the request is in progress. The greenLED blinks.7Wait for acknowledgement.If successful, a positive indicator tone sounds andthe display shows positive mini notice.If unsuccessful, a negative indicator tone soundsand the display shows negative mini notice.Note:Do not press during the RadioDisable operation as you will not get anacknowledgement message.Radio Enable via Manual Dial1 to access the menu.2 or to Contacts and press toselect.The entries are alphabetically sorted.3 or to Manual Dial and press toselect.4 or to Private Call and press to select.The first line of the display shows Radio Number:.5Key in the subscriber ID and press .6 or to Radio Enable and press to select.The display shows Radio Enable and thesubscriber alias or ID. The green LED blinks.7Wait for acknowledgement.If successful, a positive indicator tone sounds andthe display shows positive mini notice.If unsuccessful, a negative indicator tone soundsand the display shows negative mini notice.Keypad Microphone Features169English
Note:Do not press during the RadioEnable operation as you will not get anacknowledgement message.Password Lock FeaturesIf enabled, this feature only allows you access yourradio if the correct password is entered uponpowering up.You can use a keypad microphone or Scroll Up/Down buttons to enter password.Accessing the Radio from Password1Power up your radio.You hear a continuous tone.2Do one of the following:• Enter your current four-digit password viakeypad microphone. The display shows .Press to proceed.• Enter your current four-digit password. Press or to edit each digit’s numericvalue and to enter the selected digit andmove to the next digit. Each digit changes to .Press to confirm your selection.You hear a positive indicator tone for every digitentered. Press to remove each on thedisplay. You hear a negative indicator tone, if youpress when the line is empty, or if you pressmore than four digits.If the password is correct, your radio proceeds topower up. See Powering Up the Radio on page22.If the password is incorrect, the display showsWrong Password. Repeat Step 2.After the third incorrect password, the displayshows Wrong Password and then, shows RadioLocked. A tone sounds and the LED double blinksyellow.Your radio enters into locked state for 15 minutes,and responds to inputs from On/Off Button andprogrammed Backlight button only.Keypad Microphone Features170English
Note:The radio is unable to receive any call,including emergency calls, in locked state.The use of Emergency footswitch cancelspassword input to access radio.Unlocking the Radio from Locked StateDo one of the following.Your radio restarts the 15 minutes timer for lockedstate when you power up.• Wait for 15 minutes. Repeat Steps 1 to 2 in Accessing the Radio from Password on page170.• Power up the radio, if you have powered downthe radio during locked state.A tone sounds and the yellow LED doubleblinks. The display shows Radio Locked.Wait for 15 minutes. Repeat Accessing theRadio from Password on page 170.Turning the Password Lock On or Off1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Passwd Lock and press toselect.5Enter a four-digit password.See Step 2 in Accessing the Radio from Passwordon page 170.6If the password is correct, do one of the following.•Press to enable Password Lock. Thedisplay shows beside Enabled.•Press to disable Password Lock. The disappears from beside Enabled.Keypad Microphone Features171English
7If the password is incorrect:The display shows Wrong Password andautomatically returns to the previous menu.Changing the Password1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Passwd Lock and press toselect.5Enter your current four-digit password via keypadmicrophone.See Step 2 in Accessing the Radio from Passwordon page 170.6Press to proceed.If the password is incorrect, the display showsWrong Password, and automatically returns to theprevious menu.7If the password entered in the previous step iscorrect, or to Change Pwd and press to select.8Enter a new four-digit password via keypadmicrophone.See Step 2 in Accessing the Radio from Passwordon page 170.9Re-enter the new four-digit password.See Step 2 in Accessing the Radio from Passwordon page 170.10 Press to proceed.If the reentered password matches the newpassword entered earlier, the display showsPassword Changed.If the reentered password does NOT match thenew password entered earlier, the display showsPasswords Do Not Match.Keypad Microphone Features172English
The screen automatically returns to the previousmenu.Text Entry ConfigurationYou can configure the following settings for enteringtext on your radio:• Word Correct• Word Predict• Sentence Cap• My WordsNote:Press at any time to return to theprevious screen.Long press at any time to return to theHome screen.The radio exits the current screen once theinactivity timer expires.Word CorrectSupplies alternative word choices when the wordentered into the text editor is not recognized by the in-built dictionary.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Text Entry and press toselect.5 or to Word Correct and press to select.You can also use or to change the selectedoption.6Do one of the following:Keypad Microphone Features173English
•Press to enable Word Correct. Thedisplay shows beside Enabled.•Press to disable Word Correct. The disappears from beside Enabled.Word PredictYour radio can learn common word sequences thatyou often enter. It then predicts the next word youmay want to use after you enter the first word of acommon word sequence into the text editor.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Text Entry and press toselect.5 or to Word Predict and press to select.You can also use or to change the selectedoption.6Do one of the following:•Press to enable Word Predict. Thedisplay shows beside Enabled.•Press to disable Word Predict. The disappears from beside Enabled.Sentence CapAutomatically enables capitalization for the first letterin the first word for every new sentence.1 to access the menu.2 or to Utilities and press toselect.Keypad Microphone Features174English
3 or to Radio Settings and press to select.4 or to Text Entry and press toselect.5 or to Sentence Cap and press to select.You can also use or to change the selectedoption.6Do one of the following:•Press to enable Sentence Cap. Thedisplay shows beside Enabled.•Press to disable Sentence Cap. The disappears from beside Enabled.Viewing Custom WordsYou can add your own custom words into your radio’sin-built dictionary. Your radio maintains a list tocontain these words.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Text Entry and press toselect.5 or to My Words and press toselect.6 or to List of Words and press to select.Display shows the list of custom words.Editing Custom WordYou can edit the custom words saved in your radio.1 to access the menu.Keypad Microphone Features175English
2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Text Entry and press toselect.5 or to My Words and press toselect.6 or to List of Words and press to select.Display shows the list of custom words.7 or to the required word and press to select.8 or to Edit and press to select.9Use the keypad to edit your custom word.•Press to move one space to the left.•Press or to move one space to theright.•Press to delete any unwantedcharacters.•Long press to change text entry method.10 Press once your custom word is complete.The display shows transitional mini notice,confirming your custom word is being saved.If the custom word is saved, a tone sounds andthe display shows positive mini notice.If the custom word is not saved, a low tone soundsand the display shows negative mini notice.Adding Custom WordsYou can add your own custom words into your radio’sin-built dictionary.1 to access the menu.Keypad Microphone Features176English
2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Text Entry and press toselect.5 or to My Words and press toselect.6 or to Add New Word and press to select.Display shows the list of custom words.7Use the keypad to edit your custom word.Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change text entrymethod. Press once your custom word iscompleted.The display shows transitional mini notice, confirmingyour custom word is being saved.If the custom word is saved, a tone sounds and thedisplay shows positive mini notice.If the custom word is not saved, a low tone soundsand the display shows negative mini notice.Deleting a Custom WordYou can delete the custom words saved in your radio.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.Keypad Microphone Features177English
4 or to Text Entry and press toselect.5 or to My Words and press toselect.6 or to the required word and press to select.7 or to Delete and press toselect.8Choose one of the following.•At Delete Entry?, press to select Yes.The display shows Entry Deleted.• or to No and press to returnto the previous screen.Deleting All Custom WordsYou can delete all custom words from your radio’s in-built dictionary.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Text Entry and press toselect.5 or to My Words and press toselect.6 or to Delete All and press toselect.7Choose one of the following.•At Delete Entry?, press to select Yes.The display shows All Entries Deleted.Keypad Microphone Features178English
• or to No and press to returnto the previous screen.Front Panel Configuration (FPC)Your radio is able to customize certain featureparameters to enhance the use of your radio.Entering FPC ModeNote:Long press at any time to return to theHome screen.1 to access the menu.2 or to Utilities and press toselect.3 or to Program Radio and press to select.Editing FPC Mode ParametersUse the following buttons as required while navigatingthrough the feature parameters.•, , , – Scroll through options,increase/decrease values, or navigate vertically.• – Select the option or enter a sub-menu.• – Short-press to return to previous menu orto exit the selection screen. Long-press to returnto Home screen.Keypad Microphone Features179English
Connect Plus OperationsConnect Plus Operations180English
Additional Radio Controls in ConnectPlus ModePush-To-Talk (PTT) ButtonThe PTT button on the side of the radio ( ) servestwo basic purposes:A• While a call is in progress, the PTT button allowsthe radio to transmit to other radios in the call.Press and hold the PTT button to talk. Release thePTT button to listen.The microphone is activated when the PTT buttonis pressed.• While a call is not in progress, the PTT button isused to make a new call (see Making a Radio Callon page 196).If the Talk Permit Tone is enabled, wait until the shortalert tone ends before talking.Programmable ButtonsYour dealer can program the programmable buttonsas shortcuts to radio functions depending on theduration of a button press:Short press Pressing and releasing rapidly.Long press Pressing and holding for theprogrammed duration.Press and hold Keeping the button pressed.Note:The programmed duration of a button press isapplicable for all assignable radio/utilityfunctions or settings. See EmergencyOperation on page 222 for more informationon the programmed duration of theEmergency button.Additional Radio Controls in Connect Plus Mode181English
Assignable Radio FunctionsBluetooth® AudioSwitchToggles audio routingbetween internal radiospeaker and externalBluetooth-enabled accessory.Busy QueueCancellationExits the busy mode when anon-Emergency call in theBusy Queue was initiated.Emergency calls, onceaccepted into the BusyQueue, cannot be cancelled.Call Log Selects the call log list.Contacts Provides direct access to theContacts list.Emergency On/Off Depending on theprogramming, initiates orcancels an emergency.Horns/Lights Toggles horns and lightsfeature on or off.Intelligent Audio Toggles intelligent audio on oroff.Manual Dial Depending on theprogramming, initiates aPrivate or Phone Call bykeying in any subscriber ID orphone number.One Touch Access Directly initiates a predefinedPrivate Call, a Call Alert or aQuick Text message.Privacy Toggles privacy on or off.Radio Check Determines if a radio is activein a system.Radio Enable Allows a target radio to beremotely enabled.Radio Disable Allows a target radio to beremotely disabled.Remote Monitor Turns on the microphone of atarget radio without it givingany indicators.Roam Request Requests to search for adifferent site.Scan Toggles scan on or off.Additional Radio Controls in Connect Plus Mode182English
Site Lock On/Off When toggled on, the radiosearches the current site only.When toggled off, the radiosearches other sites inaddition to the current site.Text Message Selects the text messagemenu.VoiceAnnouncement forChannelPlays zone and channelannouncement voicemessages for the currentchannel. This function isunavailable when VoiceAnnouncement is disabled.VoiceAnnouncementOn/OffToggles voice announcementon or off.Zone Allows selection from a list ofzones.Assignable Settings or Utility FunctionsAF Suppressor Toggles the Acoustic FeedbackSuppressor feature on or off.All Tones/Alerts Toggles all tones and alerts onor off.BacklightBrightnessAdjusts the brightness level.Channel Up/DownDepending on the programming,changes channel to previous ornext channel.Display Mode Toggles the day/night displaymode on or off.GlobalPositioningSystem (GPS)Toggles the satellite navigationsystem on or off.Power Level Toggles transmit power levelbetween high and low.Unassigned Indicates that the buttonfunction has not yet beenassigned.Identifying Status Indicators in Connect PlusModeDisplay IconsAdditional Radio Controls in Connect Plus Mode183English
The following are icons that appear on the display ofthe radio.Received Signal Strength Indicator(RSSI)The number of bars displayed repre-sents the radio signal strength. Fourbars indicate the strongest signal. Thisicon is only displayed while receiving.BluetoothThe Bluetooth feature is enabled butthere is no remote Bluetooth device con-nected.Bluetooth ConnectedThe Bluetooth feature is enabled. Theicon stays lit when a remote Bluetoothdevice is connected.Notification List has items to review. or Power LevelRadio is set at Low power or Radio isset at High power.Tones DisableTones are turned off.Option BoardThe Option Board is enabled.Option Board Non-FunctionThe Option Board is disabled.GPS/GNSS AvailableThe GPS/GNSS feature is enabled. Theicon stays lit when a position fix is avail-able.GPS/GNSS Not Available/Out ofRangeThe GPS/GNSS feature is enabled butis not receiving data from the satellite.Additional Radio Controls in Connect Plus Mode184English
ScanScan feature is enabled.EmergencyRadio is in Emergency mode.SecureThe Privacy feature is enabled.UnsecureThe Privacy feature is disabled.Site RoamingThe site roaming feature is enabled.Wi-Fi Excellent[6]Wi-Fi signal is excellent.Wi-Fi Good[6]Wi-Fi signal is good.Wi-Fi Average[6]Wi-Fi signal is average.Wi-Fi Poor[6]Wi-Fi signal is poor.Wi-Fi Unavailable[6]Wi-Fi signal is unavailable.Call IconsThe following icons appear on the radio’s displayduring a call. These icons also appear in the Contactslist to indicate ID type.Private CallIndicates a Private Call in progress. Inthe Contacts list, it indicates a sub-scriber alias (name) or ID (number).6Only applicable for XPR 5550e/XPR 5580eAdditional Radio Controls in Connect Plus Mode185English
Group Call/Site All CallIndicates a Group Call or Site All Callin progress. In the Contacts list, it indi-cates a group alias (name) or ID(number).Phone Call as Private CallIndicates a Phone Call as Private Callin progress.Dispatch CallThe Dispatch Call contact type is usedto send a text message to a dispatch-er PC through a third-party Text Mes-sage Server.Advanced Menu IconsThe following icons appear beside menu items thatoffer a choice between two options or as an indicationthat there is a sub-menu offering two options.Checkbox (Empty)Indicates the option is not selected.Checkbox (Checked)Indicates the option is selected.Solid Black BoxIndicates the option selected for the menuitem with a sub-menu.Sent Item IconsThe following icons appear at the top right corner ofthe radio’s display in the Sent Items folder.ORSent SuccessfullyThe text message is sent successfully.Bluetooth Device IconsThe following icons also appear next to items in thelist of Bluetooth-enabled devices available to indicatethe device type.Additional Radio Controls in Connect Plus Mode186English
Bluetooth Data DeviceBluetooth-enabled data device, suchas a scanner.Bluetooth Audio DeviceBluetooth-enabled audio device,such as a headset.Bluetooth PTT DeviceBluetooth-enabled PTT device, suchas a PTT-Only Device (POD).LED IndicatorThe LED indicator ( ) shows the operational status ofyour radio.ABlinking red Radio is transmitting at low batterycondition, receiving an emergencytransmission or has failed the self-test upon powering up, or hasmoved out of range if radio is config-ured with Auto-Range TransponderSystem.Rapidlyblinking redRadio is receiving over-the-air filetransfer (Option Board firmware file,Network Frequency file or OptionBoard Codeplug file) or upgrading toa new Option Board firmware file.Blinkinggreen andyellowRadio is receiving a Call Alert, re-ceived a text message or Scan is en-abled and is receiving activity.Additional Radio Controls in Connect Plus Mode187English
Solid yellow Radio is in Bluetooth DiscoverableMode.Doubleblinking yel-lowRadio is actively searching for a newsite.Blinking yel-lowRadio is receiving a Call Alert orScan is enabled and is idle (radio willremain muted to any activity).Solid green Radio is powering up or transmitting.BlinkinggreenRadio is powering up, receiving anon-privacy- enabled call or data.DoubleblinkinggreenRadio is receiving a privacy-enabledcall.Indicator TonesHigh pitched tone Low pitched tonePositive Indicator ToneNegative Indicator ToneAlert TonesAlert tones provide you with audible indications of thestatus, or response to data received on the radio.Continuous Tone A monotone sound.Sounds continuously un-til termination.Periodic Tone Sounds periodically de-pending on the durationset by the radio. Tonestarts, stops, and repeatsitself.Repetitive Tone A single tone that re-peats itself until it is ter-minated by the user.Momentary Tone Sounds only once for ashort period of time de-fined by the radio.Switching Between Connect Plus and Non-Connect Plus ModesTo switch to a non-Connect Plus mode, you mustchange to another zone, if programmed by yourAdditional Radio Controls in Connect Plus Mode188English
dealer or system administrator. Check with yourdealer or system administrator to see if your radio hasbeen programmed with non-Connect Plus zones, andwhat features are available while operating in non-Connect Plus zones.Additional Radio Controls in Connect Plus Mode189English
Making and Receiving Calls in ConnectPlus ModeSelecting a SiteA site provides coverage for a specific area. AConnect Plus site has a site controller and amaximum of 15 repeaters. In a multi-site network, theConnect Plus radio will automatically search for a newsite when the signal level from the current site dropsto an unacceptable level.Roam RequestA Roam Request tells the radio to search for adifferent site, even if the signal from the current site isacceptable.If there are no sites available,•The radio display shows Searching andcontinues to search through the list of sites.• The radio will return to the previous site, if theprevious site is still available.Note:This is programmed by your dealer.Press the programmed Roam Request button.You hear a tone, indicating the radio has switchedto a new site. The display shows Site ID <SiteNumber>.Site Lock On/OffWhen toggled on, the radio searches the current siteonly. When toggled off, the radio searches other sitesin addition to the current site.Press the programmed Site Lock button.• You hear a positive indicator tone, indicatingthe radio has locked to the current site. Thedisplay shows Site Locked.• You hear a negative indicator tone, indicatingthe radio is unlocked. The display shows SiteUnlocked.Site RestrictionYour Connect Plus radio system administrator has theability to decide which network sites your radio is andis not allowed to use. Your radio does not need to bereprogrammed to change the list of allowed anddisallowed sites. If your radio attempts to register at adisallowed site, you see a brief message stating:Making and Receiving Calls in Connect Plus Mode190English
Site <number given> Not Allowed. The radiothen searches for a different network site.Selecting a ZoneThe radio can be programmed with a maximum of 16Connect Plus Zones and each Connect Plus zonecontains a maximum of 16 assignable positions onthe Channel Selector Knob.Each assignable knob position can be used to startone of the following voice call types:• Group Call• Multigroup Call• Site All Call• Private Call1Access the Zone feature by performing one of thefollowing actions:Radio Con-trolsStepsProgrammedZone buttonPress the programmed Zonebutton.Radio menu 1 to access the menu.Radio Con-trolsSteps2 or to Zone andpress to select.The current zone is displayed and indicated by a.2Select the required zone.Radio Control Steps or or and scroll to therequired zone.3Press to select.The display shows <Zone> Selectedmomentarily and returns to the selected zonescreen.Using Multiple NetworksIf your radio has been programmed to use multipleConnect Plus networks, you can select a differentMaking and Receiving Calls in Connect Plus Mode191English
network by switching to the Connect Plus zone that isassigned to the desired network. These network-to-zone assignments are configured by your dealerthrough radio programming.Selecting a Call TypeUse the Channel Selector Knob to select a call type.This can be a Group Call, Multi-group Call, Site AllCall or Private Call, depending on how your radio isprogrammed. If you change the Channel SelectorKnob to a different position (that has a call typeassigned to it), this causes the radio to re-registerwith the Connect Plus site. The radio registers withthe Registration Group ID that has been programmedfor the new Channel Selector Knob position call type.If you select a position that has no call type assignedto it, your radio sounds a continuous tone and thedisplay shows Unprogrammed. Your radio does notoperate when selected to an unprogrammed channel,use the Channel Selector Knob to select aprogrammed channel instead.Once the required zone is displayed (if you havemultiple zones in your radio), turn the programmedChannel Selector Knob to select the call type.Receiving and Responding to a Radio CallOnce the channel, subscriber ID or call type isdisplayed, you can proceed to receive and respond tocalls.The LED lights up solid green while the radio istransmitting and blinks green when the radio isreceiving.Note:The LED lights up solid green while the radiois transmitting and double blinks green whenthe radio is receiving a privacy-enabled call.To unscramble a privacy-enabled call, yourradio must have the same Privacy Key, ORthe same Key Value and Key ID (programmedby your dealer), as the transmitting radio (theradio you are receiving the call from).Note:See Privacy on page 239 for moreinformation.Receiving and Responding to a Group CallTo receive a call from a group of users, your radiomust be configured as part of that group.Making and Receiving Calls in Connect Plus Mode192English
When you receive a Group Call (while on the Homescreen), the LED blinks green.The Group Call iconappears in the top right corner. The first text lineshows the caller alias. The second text line displaysthe group call alias. Your radio unmutes and theincoming call sounds through the radio's speaker.1Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.The LED lights up solid green.2Wait for one of the Talk Permit Tone to finish (ifenabled), and speak clearly into the microphone.3Release the PTT button to listen.If there is no voice activity for a predeterminedperiod of time, the call ends.Note:See Making a Group Call on page 196 fordetails on making a Group Call.Receiving and Responding to a Private CallA Private Call is a call from an individual radio toanother individual radio.When you receive a Private Call, the LED blinksgreen. The first line of the display shows thesubscriber alias or ID, and the RSSI icon. The secondline displays Private Call and the Private Call icon.Your radio unmutes and the incoming call soundsthrough the speaker of the radio.1Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.2Press the PTT button to respond to the call.The LED lights up solid green.3Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.4Release the PTT button to listen.If there is no voice activity for a predetermined periodof time, the call ends.The display shows Call Ended.See Making a Private Call on page 197 for details onmaking a Private Call.Receiving a Site All CallA Site All Call is a call from an individual radio toevery radio on the site. It is used to make importantannouncements requiring the user’s full attention.Making and Receiving Calls in Connect Plus Mode193English
When you receive an Site All Call, a tone sounds andthe LED blinks green.The Group Call icon appears in the top right corner.The first text line shows the caller alias. The secondtext line displays Site All Call. Your radiounmutes and the incoming call sounds through theradio speaker.Once the Site All Call ends, the radio returns to theprevious screen before receiving the call. A Site AllCall does not wait for a predetermined period of timebefore ending.You cannot respond to an Site All Call.Note:See Making a Site All Call on page 197 fordetails on making a Site All Call.Note:The radio stops receiving the Site All Call ifyou switch to a different channel whilereceiving the call. During a Site All Call, youwill not be able to use any programmed buttonfunctions until the call ends.Receiving an Inbound Private Phone CallWhen you receive an Inbound Private Phone Call, thePhone Call as Private Call icon appears in the topright corner. The first text line shows Phone Call.1Press and hold the PTT button to answer and talk.Release the PTT button to listen.2Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display returns to the Phone Call screen.The display shows Phone Call Ended.Making a Buffered Over-Dial in an Inbound PhonePrivate CallDuring the call, the Phone Call as Private Call iconappears in the top right corner. The first text line ofthe display shows Phone Call.1Use the keypad to enter the digits and press the button.Making and Receiving Calls in Connect Plus Mode194English
Press followed by within 2 seconds toinsert a pause. The P replaces * and # on thedisplay.The Phone Call as Private Call icon appears in thetop right corner. The first text line of the displayshows the entered digits.2Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display returns to the Phone Call screen.The display shows Phone Call Ended.Making a Live Over-Dial in an Inbound PhonePrivate CallDuring the call, the Phone Call as Private Call iconappears in the top right corner. The first text line ofthe display shows Phone Call.1Press the PTT button and use the keypad to enterthe digits.The Phone Call as Private Call icon appears in thetop right corner. The first text line of the displayshows the Live Dial digits.2Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display returns to the Phone Call screen.The display shows Phone Call Ended.Receiving an Inbound Phone Talkgroup CallWhen you receive an Inbound Phone Talkgroup Call,the Group Call icon appears in the top right corner.The first text line shows Call1.Press the PTT button to talk and release it tolisten.Inbound Phone Multi-Group CallWhen you receive an Inbound Phone Multi-GroupCall, the Group Call icon appears in the top rightcorner. The first text line shows Multigroup Call.The radio unmutes and the incoming multi-group callsounds through the radio's speaker.Making and Receiving Calls in Connect Plus Mode195English
Making a Radio CallAfter selecting your channel, you can select asubscriber alias or ID, or group alias or ID by using:• The Channel Selector Knob.• A programmed One Touch Access button – TheOne Touch Access feature allows you to make aPrivate Call to a predefined ID easily. This featurecan be assigned to a short or long programmablebutton press. You can ONLY have one IDassigned to a One Touch Access button. Yourradio can have multiple One Touch Accessbuttons programmed.• The Contacts list (see Contacts Settings on page214).Note:Your radio must have the Privacy featureenabled on the channel to send a privacy-enabled transmission. Only target radios withthe same Key Value and Key ID as your radiowill be able to unscramble the transmission.Note:See Privacy on page 239 for moreinformation.Making a Call with the Channel Selector KnobMaking a Group CallTo make a call to a group of users, your radio mustbe configured as part of that group.1Select the channel with the active group alias orID. See Selecting a Call Type on page 192.2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press the PTT button to make the call.The LED lights up solid green. The Group Callicon appears in the top right corner. The first textline shows the group call alias.4Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.5Release the PTT button to listen.When the target radio responds, the LED blinksgreen, the radio unmutes and the responsesounds through the radio’s speaker. You see theGroup Call icon, the group alias or ID, andtransmitting radio alias or ID on your display.Making and Receiving Calls in Connect Plus Mode196English
If there is no voice activity for a predeterminedperiod of time, the call ends. Radio returns to thescreen you were on prior to initiating the call.Making a Private CallWhile you can receive and/or respond to a PrivateCall initiated by an authorized individual radio, yourradio must be programmed for you to initiate a PrivateCall.You will hear a negative indicator tone, when youmake a Private Call via the One Touch Accessbutton, or the Channel Selector Knob, if this feature isnot enabled.1Do one of the following.• Select the channel with the active subscriberalias or ID. See Selecting a Call Type on page192.• Press the programmed One Touch Accessbutton.2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press the PTT button to make the call.The LED lights up solid green. The Private Callicon appears on the top right corner. The first textline shows the target subscriber alias. The secondtext line displays the call status.4Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.5Release the PTT button to listen.When the target radio responds, the LED blinksgreen.If there is no voice activity for a predeterminedperiod of time, the call ends. You hear a shorttone. The display shows Call Ended.Your radio may be programmed to perform a radiopresence check prior to setting up the Private Call. Ifthe target radio is not available, you hear a short toneand see negative mini notice on the display.Making a Site All CallThis feature allows you to transmit to all users on thesite that are currently not engaged in another call.Your radio must be programmed to allow you to usethis feature.Making and Receiving Calls in Connect Plus Mode197English
Users on the channel/site cannot respond to an SiteAll Call.1Select the channel with the active Site All Callgroup alias. See Selecting a Call Type on page192.2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press the PTT button to make the call.The LED lights up solid green. The Group Callicon appears in the top right corner. The first textline shows Site All Call.4Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.Making a Multi-group CallThis feature allows you to transmit to all users onmultiple groups. Your radio must be programmed toallow you to use this feature.Note:Users on the groups cannot respond to aMulti-group Call.1Turn the Channel Selector Knob to select theMulti-group alias or ID.2Press the PTT button to make the call.The LED lights up solid green. The display showsthe Multi-group alias or ID.Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.Making a Private Call with a One Touch Call ButtonNote:Programmable buttons press must be initiatedfrom the Home screen.The One Touch Call feature allows you to easilymake a Private Call to a pre-defined Private Call aliasor ID. This feature can be assigned to a short or longprogrammable button press.You can ONLY have one alias or ID assigned to aOne Touch Call button. Your radio can have multipleOne Touch Call buttons programmed.1Press the programmed One Touch Call button tomake a Private Call to the pre-defined Private Callalias or ID.Making and Receiving Calls in Connect Plus Mode198English
2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press the PTT button to make the call.The LED lights up solid green.The display shows the Private Call alias or ID.4Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.5Release the PTT button to listen.When the target radio responds, the LED blinksgreen.If there is no voice activity for a predeterminedperiod of time, the call ends.Making a Call with the Programmable Manual DialButtonMaking a Private Call1Press the programmed Manual Dial button toenter into the Manual Dial screen.The display shows Number:.2Use the keypad to enter a subscriber alias orPrivate ID.3Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.4Press the PTT button to make the call.The LED lights up solid green. The Private Callicon appears in the top right corner. The first textline shows the subscriber alias. The second textline displays the call status.5Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.6Release the PTT button to listen.When the target radio responds, the LED blinksgreen.If there is no voice activity for a predeterminedperiod of time, the call ends. You hear a shorttone. The display shows Call Ended.Making an Outbound Private Phone Call with theProgrammable Manual Dial Button1Press the programmed Manual Dial button toenter into the Manual Dial screen.Making and Receiving Calls in Connect Plus Mode199English
The display shows Number:.2Use the keypad to enter a telephone number, andpress to place a call to the entered number.Press to delete any unwanted characters. Press followed by within 2 seconds to inserta pause. The P replaces * and # on the display.If successful, the first line of the display showsPhone Call. The second line of the display showsthe dialed telephone number.If an invalid telephone number is selected, thedisplay shows a negative mini notice, Phone CallFailed, Resource Not Available, or InvalidPermissions.If is pressed with no telephone numberentered, the radio sounds a positive indicator tonethen a negative indicator tone. The displayremains the same.3Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display shows Phone Call Ended.Making an Outbound Private Phone Call via the PhoneMenu1 to access the menu.2 or to Phone and press to select.3Press to select Manual Dial.The first line of the display shows Number, thesecond line of the display shows a blinking cursor.4Use the keypad to enter a telephone number, andpress to place a call to the entered number.Press to delete any unwanted characters. Press followed by within 2 seconds to inserta pause. The P replaces * and # on the display.Making and Receiving Calls in Connect Plus Mode200English
If successful, the first line of the display showsPhone Call. The second line of the display showsthe dialed telephone number.If an invalid telephone number is selected, thedisplay shows a negative mini notice, Phone CallFailed, Resource Not Available, or InvalidPermissions.If is pressed with no telephone numberentered, the radio sounds a positive indicator tonethen a negative indicator tone. The displayremains the same.5Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display shows Phone Call Ended.Making an Outbound Private Phone Call from ContactsNote:If the Phone Manual Dial is disabled inMOTOTRBO Connect Plus Option BoardCPS, the Phone Number item will not bedisplayed in the Menu.1 to access the menu.2 or to Contacts and press toselect.3 or to Manual Dial and press toselect.4 or to Phone Number and press to select.The first line of the display shows Number, thesecond line of the display shows a blinking cursor.5Use the keypad to enter a telephone number, andpress to place a call to the entered number.If the PTT button is pressed, the display shows anegative mini notice, Press OK to Send andreturns to the previous screen.Press to delete any unwanted characters. Press followed by within 2 seconds to inserta pause. The P replaces * and # on the display.Making and Receiving Calls in Connect Plus Mode201English
If successful, the first line of the display showsPhone Call. The second line of the display showsthe dialed telephone number.If is pressed with no telephone numberentered, the radio sounds a positive indicator tonethen a negative indicator tone. The displayremains the same.6Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display shows Phone Call Ended.Waiting for the Channel Grant in an Outbound PrivatePhone CallWhen you make a Private Phone Call, the first line ofthe display shows Phone Call. The second line ofthe display shows the dialed telephone number.When the call is connected, the Phone Call as PrivateCall icon appears in the top right corner. The first lineof the display shows the telephone number.If unsuccessful, the display shows a negative mininotice, Phone Call Failed, Resource NotAvailable, or Invalid Permissions.Long press to end the call.The display returns to the previous screen.Making a Buffered Over-Dial in a Connected OutboundPrivate Phone CallDuring the call, the Phone Call as Private Call iconappears in the top right corner. The first text line ofthe display shows the telephone number.1Use the keypad to enter the digits.Press to delete any unwanted characters. Press followed by within 2 seconds to inserta pause. The P replaces * and # on the display.The first text line of the display shows ExtraDigits, the second text line of the display showsthe entered extra digits.2Press the button.Making and Receiving Calls in Connect Plus Mode202English
If the PTT button is pressed, the display shows anegative mini notice, Press OK to Send andreturns to the previous screen.The Phone Call as Private Call icon appears in thetop right corner. The first text line of the displayshows the telephone number with the over-dialdigits appended.3Do one of the following.•Press to return to the Phone Call screen.•Long press to end the call.Making a Live Over-Dial in a Connected OutboundPrivate Phone CallDuring the call, the Phone Call as Private Call iconappears in the top right corner. The first text line ofthe display shows the telephone number.1Press the PTT button and use the keypad to enterthe digits.The Phone Call as Private Call icon appears in thetop right corner. The first text line of the displayshows the telephone number with the over-dialdigits appended.2Long press to end the call.The first line of the display shows Ending. Thesecond line of the display shows Phone Call....The display shows Phone Call Ended.Making and Receiving Calls in Connect Plus Mode203English
Advanced Features in Connect PlusModeAuto FallbackAuto Fallback is a system feature that allows you tocontinue to make and receive non-emergency callson the selected Group Contact in the event of certaintypes of Connect Plus system failures.If one of these failures occurs, your radio attempts toroam to a different Connect Plus site. This searchprocess may result in your radio finding an operableConnect Plus site, or it may result in your radio findinga “Fallback Channel” (if your radio is enabled for AutoFallback). A Fallback Channel is a repeater that isnormally part of an operable Connect Plus site, but iscurrently unable to communicate with either its sitecontroller or the Connect Plus network. In Fallbackmode, the repeater operates as a single digitalrepeater. Auto Fallback Mode supports non-emergency Group Calls only. No other call types aresupported in Fallback Mode.Indications of Auto Fallback ModeWhen your radio is using a Fallback channel, youhear the intermittent “Fallback Tone” approximatelyonce every 15 seconds (except while transmitting).The display periodically shows a brief message,“Fallback Channel”. Your radio only permits PTT onthe selected Group Contact (Group Call, MultigroupCall, or Site All Call). It does not allow you to makeother types of calls.Making/Receiving Calls in Fallback ModeNote:Calls are heard only by radios that aremonitoring the same Fallback channel andselected to the same Group. Calls are notnetworked to other sites or other repeaters.Emergency voice calls or Emergency Alertsare not available in Fallback mode. If youpress the emergency button in Fallback mode,the radio provides an invalid key press tone.Display-equipped radios also show themessage, “Feature not available”.Private (radio to radio) and Phone calls are notavailable in Fallback mode. If you attempt aAdvanced Features in Connect Plus Mode204English
call to a private contact, you will receive adenial tone. At this point you should select adesired group contact. Other non-supportedcalls include Remote Monitor, Call Alert, RadioCheck, Radio Enable, Radio Disable, Textmessaging, Location Updates, and packetdata calls.Enhanced Traffic Channel Access (ETCA) isnot supported in Auto Fallback mode. If two ormore radio users press PTT at the same time(or at almost the same time), it is possible thatboth radios transmit until PTT is released. Inthis event, it is possible that none of thetransmissions will be understood by receivingradios.Making calls in Fallback mode is similar to normalfunctioning. Simply select the group contact you wishto use (using the radio’s normal channel selectionmethod), and then press the PTT to start your call. Itis possible that the channel may be in use already byanother group. If the channel is in use, you receive abusy tone and the display will say “Channel Busy”.You may select Group, Multi-group or Site All Callcontacts using your radio’s normal channel selectionmethod. While the radio is operating on the FallbackChannel, the Multigroup operates just like otherGroups. It is only heard by radios that are currentlyselected to the same Multi-group.Returning to Normal OperationIf the site returns to normal trunking operation whileyou are in range of your Fallback repeater, your radioautomatically exits Auto Fallback mode. You hear aregistration “beep” when the radio successfullyregisters. If you are in the range of an operable site(that is not in Fallback mode), you may press theRoam Request button (if programmed for your radio)to force your radio to search for and register on anavailable site. If no other site is available, your radioreturns to Auto Fallback mode after searching iscomplete. If you drive out of coverage of yourFallback repeater, your radio enters Search mode(display indicates “Searching”).Radio CheckIf enabled, this feature allows you to determine ifanother radio is active in a system without disturbingthe user of that radio. No audible or visual notificationis shown on the target radio.This feature is only applicable for subscriber aliasesor IDs.Advanced Features in Connect Plus Mode205English
Sending a Radio Check1Access the Radio Check feature.RadioControlStepsProgram-med Ra-dio Checkbutton1Press the programmed RadioCheck button.2 or to the requiredsubscriber alias or ID and press to select.Menu 1 to access the menu.2 or to Contacts andpress to select.3 or to the requiredsubscriber alias or ID and press to select.4 or to Radio Checkand press to select.The display shows the Target Alias, indicating therequest is in progress. The LED lights up solidgreen.2Wait for acknowledgement.If the target radio is active in the system, a tonesounds and the display briefly shows TargetRadio Available.If the target radio is not active in the system, atone sounds and the display briefly shows TargetRadio Not Available.Radio returns to the subscriber alias or ID screenwhen initiated via Menu.Radio returns to the Home Screen if initiated viathe programmable button.Remote MonitorUse the Remote Monitor feature to turn on themicrophone of a target radio (subscriber alias or IDsonly). The green LED will blink once on the targetsubscriber. You can use this feature to monitor,remotely, any audible activity surrounding the targetradio.Advanced Features in Connect Plus Mode206English
Your radio must be programmed to allow you to usethis feature.Initiating Remote MonitorNote:Remote Monitor automatically stops after aprogrammed duration or when there is anyattempt to initiate transmission, changechannels or power down the radio.1Access the Remote Monitor feature.RadioControlStepsProgram-med Re-moteMonitorButton1Press the programmed RemoteMonitor button.2 or to the required sub-scriber alias or ID and press to select.Menu 1 to access the menu.2 or to Contacts andpress to select.RadioControlSteps3 or to the required sub-scriber alias or ID and press to select.4 or to Manual Dialand press to select.5 or to Remote Mon.and press to select.The first text line shows Rem. Monitor. Thesecond text line displays the Target Alias,indicating the request is in progress. The LEDlights up blinking green.2Wait for acknowledgement.If successful, a positive indicator tone sounds andthe display momentarily shows Rem. MonitorSuccessful. Your radio starts playing audio fromthe monitored radio for a programmed durationand display shows Rem. Monitor, followed byAdvanced Features in Connect Plus Mode207English
target alias. Once the timer expires, the radiosounds an alert tone and the LED turns off.If unsuccessful, the radio sounds a negativeindicator tone the display shows Rem. MonitorFailed.ScanThis feature allows your radio to monitor and join callsfor groups defined in a pre-programmed scan list.When scan is enabled, the scan icon appears on thestatus bar and the LED blinks yellow when idle.Starting and Stopping ScanNote:This procedure turns the Scan feature On orOff for all Connect Plus zones with the sameNetwork ID as your currently selected zone. Itis important to note that even when the Scanfeature is turned on via this procedure, scanmay still be disabled for some (or all) groupson your scan list. See Editing the Scan List onpage 210 for more information.You can start and stop scanning by pressing theprogrammed Scan button OR follow the proceduredescribed next.1 to access the menu.2 or to Scan and press to select.3 or to Turn On or Turn Off and press to select.•The display shows Scan On if scan is enabled.•The Scan menu shows Turn Off if scan isenabled.•The display shows Scan Off if scan isdisabled.•The Scan menu shows Turn On if scan isdisabled.Responding to a Transmission During a ScanDuring scanning, your radio stops on a group whereactivity is detected. The radio continuously listens forany member in the scan list when idle on the controlchannel.Advanced Features in Connect Plus Mode208English
1Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.2Press the PTT button during hang time.The LED lights up solid green.3Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.4Release the PTT button to listen.If you do not respond within the hang time, theradio returns to scanning other groups.User Configurable ScanIf the Edit List menu is enabled, a user is able to Addand Remove the scan members from the AddMember menu. A Scan List member must be aregular Group Contact (i.e. not Multi-group or Site AllCall/Network Wide All Call) that is currently assignedto a Channel Selector position in a Connect PlusZone with the same Network ID as the currentlyselected Zone. The Talkgroup alias must not matchany Talkgroup that has been included in the currentZone's Scan List.Scan can be turned on or off from the menu or bypressing a programmed Scan On/Off button.This feature functions only when the radio is notcurrently involved in a call. If you are presentlylistening to a call, your radio cannot scan for othergroup calls, and is therefore unaware they are inprogress. Once your call is finished, your radioreturns to the control channel time slot and is able toscan for groups that are in the scan list.Turning Scan On or OffNote:This procedure turns the Scan feature On orOff for all zones with the same Network ID asyour currently selected zone. It is important tonote that even when the Scan feature isturned on via this procedure, scan may still bedisabled for some (or all) groups on your scanlist. See the next section for more information.If Scan is turned on, the Scan icon appears on yourdisplay. When Scan is on and you are notparticipating in a call, the LED blinks green andyellow.Advanced Features in Connect Plus Mode209English
The procedure for turning Scan on or off depends onhow your radio is programmed. If programmed with aScan On/Off button, use the button to toggle thefeature on or off. If your radio has been programmedso that Scan can be turned on or off via the menu,follow the procedure described next.1 to access the menu.2 or to Scan and press to select.3 or to Turn On or Turn Off and press to select.•The display shows Scan On momentarily ifscan is disabled.•The display shows Scan Off momentarily ifscan is enabled.Editing the Scan ListNote:If the scan list entry happens to be the radio’scurrently selected group, the radio listens foractivity on this group regardless of whether thelist entry currently shows a check mark or not.Whenever a radio is not in a call, the radiolistens for activity on its Selected Group,Multigroup, the Site All Call, and its DefaultEmergency Revert Group (if configured forone). This operation cannot be disabled. IfScan is enabled the radio will also listen foractivity on enabled Zone Scan List members.Your scan list determines which groups can bescanned. The list is created when your radio isprogrammed. If your radio has been programmed toallow you to edit the scan list, you can,• Enable/disable scan for individual groups on thelist.• Add and Remove the scan members from the AddMember menu. Refer to Add or Delete a Group viathe Add Members Menu on page 211.Note:A Scan List member must be a regular GroupContact (i.e. not Multigroup or Site All Call/Network Wide All Call) that is currentlyassigned to a Channel Selector position in aConnect Plus Zone with the same Network IDas the currently selected Zone.Advanced Features in Connect Plus Mode210English
The Talkgroup alias must not match anyTalkgroup that has been included in thecurrent Zone's Scan List.1 to access the menu.2 or to View/Edit List and press to select.3 or to the desired Group name.If a check mark precedes the Group name, thenscan is currently enabled for this Group.If there is no check mark preceding the Groupname, then scan is currently disabled for thisGroup.4 to select the desired Group.The display shows Enable if scan is currentlydisabled for the Group.The display shows Disable if scan is currentlyenabled for the Group.5Select the displayed option (Enable or Disable)and press to select.Depending on which option was selected, theradio momentarily displays Scan Enabled or ScanDisabled as confirmation.The radio displays the Zone scan list again. If scanwas enabled for the Group, the check mark displaysbefore the Group name. If scan was disabled for theGroup, the check mark is removed before the Groupname.Add or Delete a Group via the Add MembersMenuThe Connect Plus radio does not allow a duplicategroup number or a duplicate group alias to be placedon a zone scan list (or to be shown as a “scancandidate”). Thus, the list of “scan candidates”described in steps 6 and 7 sometimes changes afteradding or deleting a group from the zone scan list.If your radio has been programmed to allow you toedit the scan list, you can use the Add Membersmenu to add a group to the scan list of the currentlyAdvanced Features in Connect Plus Mode211English
selected zone, or to delete a group from the san list ofthe currently selected zone.1 to access the menu.2 or to Scan option and press toselect.3 or to <Add Members> and press to select.The display shows “Add Members from Zone n” (n= the Connect Plus zone number of the firstConnect Plus zone in your radio with the sameNetwork ID as your currently selected zone).4Do one of the following.• If the group you want to add to the scan list isassigned to a channel selector position in thatzone, go to step 6.• If the group you want to add to the scan list isassigned to a channel selector position in adifferent Connect Plus zone, go to step 5.5 or to scroll a list of Connect Pluszones that have the same Network ID as thecurrently selected zone.6After locating the Connect Plus zone where thedesired group is assigned to a channel selectorposition, press to select.Your radio displays the first entry in a list of groupsassigned to a channel position in that zone. Thegroups on the list are called “scan candidates”,because they can be added to the scan list of yourcurrently selected zone (or they are already on thezone scan list).If the zone does not have any groups that can beadded to the scan list, the radio displays NoCandidates.7 or to scroll through the list ofcandidate groups.If a plus sign (+) is displayed immediately beforethe group alias, this indicates the group iscurrently on the scan list for the selected zone.Advanced Features in Connect Plus Mode212English
If the plus sign (+) is not displayed immediatelybefore the alias, the group is not currently on thescan list, but can be added.8Press when the desired group alias isdisplayed.If this group is not currently on the scan list for thecurrently selected zone, the Add (Group Alias)message is displayed.If this group is already on the scan list for thecurrently selected zone, the Delete (Group Alias)message is displayed.9Press to accept the displayed message (Addor Delete).If deleting a group from the list, you will know theoperation is successful because the plus sign (+)will no longer display immediately before the alias.If adding a group to the list, you will know theoperation is successful because the plus sign (+)will display before the alias.If you are attempting to add a group, and the list isalready full, the radio displays List Full. If thisshould occur, it will be necessary to delete a groupfrom the scan list prior to adding a new one.10 When finished, press as many times asnecessary to return to the desired menu.Understanding Scan OperationNote:If the Radio joins a call for a Zone Scan Listmember from a different Zone and Call HangTimer expires before you are able to respond,in order to respond, you must navigate to theZone and Channel of the Scan List Memberand start a new call.There are some circumstances in which you can misscalls for groups that are in your scan list. When youmiss a call for one of the following reasons, this doesnot indicate a problem with your radio. This is anormal scan operation for Connect Plus.• Scan feature is not turned on (check for the scanicon on the display).• Scan list member has been disabled via the menu(see Editing the Scan List on page 210).• You are participating in a call already.Advanced Features in Connect Plus Mode213English
• No member of the scanned group is registered atyour site (Multisite systems only).Scan TalkbackIf your radio scans into a call from the selectablegroup scan list, and if the PTT button is pressedduring the scanned call, the operation of the radiodepends on whether Scan Talkback was enabled ordisabled during radio programming. For moreinformation on how your radio is programmed,contact your radio dealer (or your radio systemadministrator).ScanTalkbackDisabledThe radio leaves the scanned call andattempts to transmit on the contact forthe currently selected channelposition. After the Call Hang Time onthe currently selected contact expires,the radio returns to the home channeland starts the Scan Hang Time Timer.The radio resumes group scan after itsScan Hang Time Timer expires.ScanTalkbackEnabledIf the PTT button is pressed during theGroup Hang Time of the scanned call,the radio attempts to transmit to thescanned group.Note:If you scan into a call for a group that is notassigned to a channel position in the currentlyselected zone and you miss the Hang Time ofthe call, switch to the proper zone and thenselect the channel position of the group to talkback to that group.Contacts SettingsNote:You can add, or edit subscriber IDs forConnect Plus Contacts. Deleting subscriberIDs can only be performed by your dealer.If the Privacy feature is enabled on a channel,you can make a privacy-enabled voice call onthat channel. Only target radios with the samePrivacy Key, or the same Key Value and KeyID as your radio are able to unscramble thetransmission.Contacts provide “address-book” capabilities on yourradio. Each entry corresponds to an alias or ID thatyou use to initiate a call.Advanced Features in Connect Plus Mode214English
Each zone provides a Contact List with up to 100contacts. The following contact types are available:• Private Call• Group Call• Multigroup Call• Site All Call Voice• Site All Call Text• Dispatch CallThe Dispatch Call contact type is used to send a textmessage to a dispatcher PC through a third-partyText Message Server.Making a Private Call from Contacts1 to access the menu.2 or to Contacts and press toselect.The entries are alphabetically sorted.3Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.4Press the PTT button to make the call.The LED lights up solid green.5Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.6Release the PTT button to listen.When the target radio responds, the LED blinksgreen and the display shows the transmittinguser's ID.If there is no voice activity for a predeterminedperiod of time, the call ends.You hear a short tone. The display shows CallEnded.Making a Call Alias SearchYou can also use alias or alphanumeric search toretrieve the required subscriber alias.This feature is only applicable while in Contacts.1 to access the menu.2 or to Contacts and press toselect.Advanced Features in Connect Plus Mode215English
The entries are alphabetically sorted.3Key in the first character of the required alias, andthen press or to locate the requiredalias.4Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.5Press the PTT button to make the call.The LED lights up solid green. The display showsthe destination alias.6Wait for the Talk Permit Tone to finish (if enabled),and speak clearly into the microphone.7Release the PTT button to listen.When the target radio responds, the LED blinksgreen.If there is no voice activity for a predeterminedperiod of time, the call ends.The display shows Call Ended.Adding a New Contact1 to access the menu.2 or to Contacts and press toselect.3 or to New Contact and press toselect.4Use the keypad to enter the contact number andpress to confirm.5Use the keypad to enter the contact name andpress to confirm.6If adding a Radio Contact, or to therequired ringer type and press to select.The radio sounds a positive indicator tone and thedisplay shows Contact Saved.Advanced Features in Connect Plus Mode216English
Call Indicator SettingsActivating and Deactivating Call Ringers for Call AlertYou can select, or turn on or off ringing tones for areceived Call Alert.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Tones/Alert and press toselect.5 or to Call Ringers and press to select.6 or to Call Alert and press toselect.The current tone is indicated by a .7 or to the required tone and press to select. appears beside selected tone.Activating and Deactivating Call Ringers for PrivateCallsYou can turn on or off the ringing tones for a receivedPrivate Call.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Tones/Alerts and press to select.Advanced Features in Connect Plus Mode217English
5 or to Call Ringers and press to select.6 or to Private Call and press to select.7Press to enable/disable the Private Callringing tones.The display shows beside Enabled, if PrivateCall ringing tones are enabled.The is not displayed when Private Call ringingtones are disabled.Activating and Deactivating Call Ringers for TextMessageYou can turn on or off the ringing tones for a receivedText Message.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Tones/Alerts and press to select.5 or to Call Ringers and press to select.6 or to Text Message and press to select.The current tone is indicated by a .7 or to the required tone and press to select. appears beside selected tone.Escalating Alarm Tone VolumeYou can program your radio to continually alert youwhen a radio call remains unanswered. This is doneby automatically increasing the alarm tone volumeover time. This feature is known as Escalert.Advanced Features in Connect Plus Mode218English
Call Log FeaturesYour radio keeps track of all recent outgoing,answered, and missed Private Calls. Use the call logfeature to view and manage recent calls.You can perform the following tasks in each of yourcall lists:• Delete• View DetailsViewing Recent CallsThe lists are Missed, Answered, and Outgoing.1 to access the menu.2 or to Call Log and press toselect.3 or to preferred list and press toselect.The display shows the most recent entry at the topof the list.4 or to view the list.Press the PTT button to start a Private Call withthe current selected alias or ID.Deleting a Call from a Call List1 to access the menu.2 or to Call Log and press toselect.3 or to the required list and press to select.When you select a call list and it contains noentries, the display shows List Empty, andsounds a low tone if Keypad Tones are turned on(see Turning Keypad Tones On or Off on page141).4 or to the required alias or ID and press to select.Advanced Features in Connect Plus Mode219English
5 or to Delete and press toselect.6Do one of the following:•Press to select Yes to delete the entry.The display shows Entry Deleted.• or to No, and press the buttonto return to the previous screen.Viewing Details from a Call List1 to access the menu.2 or to Call Log and press toselect.3 or to the required list and press to select.4 or to the required alias or ID and press to select.5 or to View Details and press to select.Display shows details.Call Alert OperationCall Alert paging enables you to alert a specific radiouser to call you back when they are able to do so.This feature is accessible through the menu viaContacts, manual dial or a programmed One TouchAccess button.Receiving and Responding to a Call AlertWhen you receive a Call Alert page, you see thenotification list listing a Call Alert with the alias or ID ofthe calling radio on the display.When you hear a repetitive tone and the LEDblinks yellow, do one of the following:• Press the PTT button while the display stillshows the Call Alert in the Notification List torespond with a Private Call.•Press to exit the Notification List. Thealert is moved to the Missed Call Log.Advanced Features in Connect Plus Mode220English
See Notification List on page 248 for details aboutthe Notification List.See Call Log Features on page 219 for detailsabout the Missed Call List.Making a Call Alert from the Contact List1 to access the menu.2 or to Contacts and press toselect.3Use one of the steps described next to select therequired subscriber alias or ID:• select the subscriber alias directly• or to the required subscriberalias and press to select.•use the Manual Dial menu• or to Manual Dial and press to select.• The Manual Dial text entry screen shall bedisplayed. Enter the Subscriber ID andpress .4 or to Call Alert and press toselect.The display shows Call Alert: <SubscriberAlias or ID>Call Alert and the subscriberalias or ID, indicating that the Call Alert has beensent.The LED lights up solid green when your radio issending the Call Alert.If the Call Alert acknowledgement is received, thedisplay shows Call Alert Successful.If the Call Alert acknowledgement is not received,the display shows Call Alert Failed.Making a Call Alert with the One Touch Access ButtonPress the programmed One Touch Accessbutton to make a Call Alert to the predefined alias.The display shows Call Alert and thesubscriber alias or ID, indicating that the Call Alerthas been sent.Advanced Features in Connect Plus Mode221English
The LED lights up solid green when your radio issending the Call Alert.If the Call Alert acknowledgement is received, thedisplay shows Call Alert Successful.If the Call Alert acknowledgement is not received,the display shows Call Alert Failed.Emergency OperationNote:If your radio is programmed for Silent or Silentwith Voice emergency initiation, in most casesit automatically exits silent operation after theEmergency Call or Emergency Alert isfinished. The exception to this rule is whenEmergency Alert is the configured EmergencyMode and Silent is the configured EmergencyType. If your radio is programmed in thismanner, the silent operation continues untilyou cancel silent operation by pressing PTT orthe button configured for Emergency Off.Emergency voice calls and Emergency Alertsare not supported when operating in ConnectPlus Auto Fallback mode. For moreinformation see the Auto Fallback on page204.An Emergency Alert is used to indicate a criticalsituation. You can initiate an Emergency at any timeon any screen display, even when there is activity onthe current channel. Pressing the Emergency buttoninitiates the programmed Emergency mode. Theprogrammed Emergency mode may also be initiatedby triggering the optional Man Down feature. TheEmergency feature may be disabled in your radio.Your dealer can set the duration of a button press forthe programmed Emergency button, except for longpress, which is similar with all other buttons:Short press Between 0.05 seconds and 0.75seconds.Long press Between 1.00 second and 3.75seconds.The Emergency button is assigned with theEmergency On/Off feature. Check with your dealer forthe assigned operation of the Emergency button.• If the short press for the Emergency button isassigned to turn on the Emergency mode, then theAdvanced Features in Connect Plus Mode222English
long press for the Emergency button is assignedto exit the Emergency mode.• If the long press for the Emergency button isassigned to turn on the Emergency mode, then theshort press for the Emergency button is assignedto exit the Emergency mode.When your radio is selected to a Connect Plus zone,it supports three Emergency modes:EmergencyCallYou must press the PTT button totalk on the assigned emergency timeslot.EmergencyCall withVoice toFollowFor the first transmission on theassigned emergency time slot, themicrophone is automaticallyunmuted and you may talk withoutpressing the PTT button. Themicrophone stays “hot” in thisfashion for a time periodprogrammed into the radio. Forsubsequent transmissions in thesame Emergency call, you mustpress the PTT button.EmergencyAlertAn Emergency Alert is not a voicecall. It is an emergency notificationthat is sent to radios that areconfigured to receive these alerts.The radio sends an emergency alertvia the control channel of thecurrently registered site. TheEmergency Alert is received byradios in the Connect Plus networkthat are programmed to receivethem (no matter which network sitethey are registered to).Only one of the Emergency Modes can be assignedto the Emergency button per zone. In addition, eachEmergency mode has the following types:Regular Radio initiates an Emergency andshows audio and/or visual indicators.Silent Radio initiates an Emergency withoutany audio or visual indicators. The radiosuppresses all audio or visualindications of the Emergency until youpress the PTT button to start a voicetransmission.SilentwithVoiceThe same as Silent operation, exceptthat the radio also unmutes for somevoice transmissions.Advanced Features in Connect Plus Mode223English
Receiving an Incoming EmergencyYour radio may be programmed to sound an alerttone and also display information about the incomingEmergency. If so programmed, upon receiving theincoming Emergency, the display shows theEmergency Details screen with the emergency icon,the Alias or ID of the radio that requested theEmergency, the Group Contact being used for theEmergency, and one additional line of information.The additional information is the name of the zonethat contains the Group Contact.At the present time, the radio displays only the mostrecently decoded Emergency. If a new Emergency isreceived before the prior Emergency is cleared, thedetails for the new Emergency replace the details ofthe previous Emergency.Depending on how your radio has been programmed,the Emergency Details screen (or Alarm List screen)will stay on your radio’s display even after theEmergency ends. You can save the emergencydetails to the Alarm List, or you can delete theemergency details as described in the followingsections.Saving the Emergency Details to the Alarm ListSaving the emergency details to the Alarm List allowsyou to view the details again at a later time byselecting Alarm List from the Main Menu.1While the Emergency Details (or Alarm List)screen is displayed, press .The Exit Alarm List screen displays.2Perform one of the following actions:•Select Yes and press to save theemergency details to the Alarm List, and to exitthe Emergency Details (or Alarm List) screen.•Select No and press to return to theEmergency Details (or Alarm List) screen.Deleting the Emergency Details1While the Emergency Details screen is displayed,press .The Delete screen displays.2Perform one of the following actions:Advanced Features in Connect Plus Mode224English
•Select Yes and press to delete theemergency details.•Select No and press to return to theEmergency Details screen.Responding to an Emergency CallNote:If you do not respond to the Emergency Callwithin the time allotted for the Emergency CallHang Time, the Emergency call will end. If youwant to speak to the group after theEmergency Call Hang Time expires, you mustfirst select the channel position assigned tothe group (if not already selected). Then,press PTT to start a non-Emergency Call tothe group.1When receiving an Emergency Call, press anybutton to stop all Emergency Call receivedindications.2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press the PTT button to initiate a voicetransmission on the Emergency group.All radios that are monitoring this group hear yourtransmission.4Wait for the Talk Permit Tone to finish (if enabled)and speak clearly into the microphone.The LED lights up green.5Release the PTT button to listen.When the emergency initiating radio responds, theLED blinks green. You see the Group Call icon,the group ID, and transmitting radio ID on yourdisplay.Responding to an Emergency AlertNote:The Group contact used for the EmergencyAlert should not be used for voicecommunication. This could prevent otherradios from sending and receiving EmergencyAlerts on the same group.An Emergency Alert from a radio indicates that theuser is in an urgent situation. You may respond to thealert by initiating a private call to the radio whodeclared the emergency, initiating a group call to aAdvanced Features in Connect Plus Mode225English
designated talk group, sending the radio a Call Alert,initiating a Remote Monitor of that radio, etc. Theproper response is determined by your organizationand the individual situation.Initiating an Emergency CallNote:If your radio is set to Silent, it does not displayany audio or visual indicators duringEmergency mode until you press the PTTbutton to initiate a voice transmission.If your radio is set to Silent with Voice, it doesnot initially display any audio or visualindicators that the radio is in Emergencymode. However, your radio unmutes for thetransmissions of radios responding to youremergency. The emergency indicators onlyappear once you press the PTT button toinitiate a voice transmission from your radio.For both “Silent” and “Silent with Voice”operation, the radio automatically exits silentoperation after the Emergency Call is finished.1Press the programmed Emergency button.2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3Press the PTT button to initiate a voicetransmission on the Emergency group.When you release the PTT button, the Emergencycall continues for the time allotted for theEmergency Call Hang Time.If you press the PTT button during this time, theEmergency call continues.Initiating an Emergency Call with Voice to FollowYour radio must be programmed for this type ofoperation.When enabled for this operation, when you press theprogrammed Emergency button, and when yourradio receives the time slot assignment, themicrophone is automatically activated withoutpressing the PTT button. This activated microphonestate is also known as “hot mic”. The “hot mic” appliesto the first voice transmission from your radio duringthe Emergency call. For subsequent transmissions inthe same Emergency call, you must press the PTTbutton.Advanced Features in Connect Plus Mode226English
1Press the programmed Emergency button.2Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)from your mouth.3The microphone remains active for the “hot mic”time specified in your radio's codeplugprogramming.During this time, the LED lights up green.4Press and hold the PTT button to talk longer thanthe programmed duration.Initiating an Emergency AlertNote:If your radio is programmed for “Silent” or“Silent with Voice”, it will not provide any audioor visual indications that it is sending anEmergency Alert. If programmed for “Silent”,the silent operation continues indefinitely untilyou press PTT or the button configured for“Emergency Off”. If programmed for “Silentwith Voice”, the radio automatically cancelssilent operation when the site controllerbroadcasts the Emergency Alert.Press the orange Emergency button.Upon transmitting the Emergency Alert to the sitecontroller, the radio’s display shows theEmergency icon, the Group contact used for theEmergency Alert, and TX Alarm.Once the Emergency Alert is successfully sent and isbeing broadcast for other radios to hear, a positiveindicator tone sounds and the radio’s display showsAlarm Sent. If the Emergency Alert is unsuccessful,a negative indicator tone sounds and the radiodisplays Alarm Failed.Exiting Emergency ModeNote:If the Emergency call ends due to theexpiration of the Emergency Hang Time, butthe emergency condition is not over, press theEmergency button again to restart theprocess.If you initiate an Emergency Alert by pressing theprogrammed Emergency button, your radioautomatically exits Emergency mode after receiving aresponse from the Connect Plus system.If you initiate an Emergency call by pressing theprogrammed Emergency button, your radio will beAdvanced Features in Connect Plus Mode227English
assigned a channel automatically when one becomesavailable. Once your radio has transmitted amessage indicating the emergency, you cannotcancel your Emergency call. However, if you pressedthe button by accident or the emergency no longerexists, you may wish to say this over the assignedchannel. When you release the PTT button, theEmergency call is discontinued after the EmergencyCall Hang Time expires.If your radio was configured for Emergency with Voiceto Follow, use the “hot mic” period to explain yourerror, then press and release the PTT button todiscontinue the transmission. The Emergency call isdiscontinued after the Emergency Call Hang Timeexpires.Text Message FeaturesYour radio is able to receive data, for example a textmessage, from another radio or a text messageapplication.The maximum length of characters for sending a textmessage, including the subject line (seen whenreceiving message from an e-mail application),depends on CPS configuration which can beconfigured up to maximum 280 characters. Your radiocan receive a text message with maximum length of280 characters.If user forwards a text message with characters morethan the maximum length, the text message will betruncated to the maximum length.The radio exits the current screen once the inactivitytimer expires.Note:Long press at any time to return to theHome screen.Sending a Quick Text MessageYour radio supports a maximum of 10 Quick Textmessages as programmed by your dealer.While Quick Text messages are predefined, you canedit each message before sending it.If you are sending the message, select therecipient by• or to the required alias and press to select.Advanced Features in Connect Plus Mode228English
• or to Manual Dial, and press to select. The first line of the displayshows Number:. The second line of the displayshows a blinking cursor. Key in the subscriberalias or ID and press .The display shows Sending Message, confirmingyour message is being sent.If the message is sent successfully, a tone soundsand the display shows Message Sent.If the message cannot be sent, a low tone soundsand the display shows Message Send Failed.If the text message fails to send, the radio returnsyou to the Resend option screen (see ManagingFail-to-Send Text Messages on page 231).Sending a Quick Text Message with the One TouchAccess ButtonPress the programmed One Touch Accessbutton to send a predefined Quick Text messageto a predefined alias.The display shows Sending Message, confirmingyour message is being sent.If the message is sent, a tone sounds and the displayshows Message Sent.If the message cannot be sent, a low tone soundsand the display shows Message Send Failed.If the text message fails to send, the radio returns youto the Resend option screen (see Managing Fail-to-Send Text Messages on page 231).Accessing the Drafts FolderThe Drafts folder stores a maximum of ten (10) lastsaved messages. When the folder is full, the nextsaved text message automatically replaces the oldesttext message in the folder.Note:You can edit saved text message beforesending it. Only available with a keypadmicrophone (see Editing and Sending a SavedText Message on page 165. Long press at any time to return to the Home screen.Viewing a Saved Text Message1Access the Text Message feature.Advanced Features in Connect Plus Mode229English
Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Drafts and press toselect.3 or to the required message and press to select.Editing and Sending a Saved Text Message1Press again while viewing the message.2 or to Edit and press to select.A blinking cursor appears.3Use the keypad to type your message.Press to move one space to the left. Press orthe key to move one space to the right.Press the key to delete any unwantedcharacters. Long press to change text entrymethod.4Press once message is composed.5Select the message recipient by• or to the required alias and press to select.• or to Manual Dial, and press to select. The first line of the displayshows Number:. The second line of the displayshows a blinking cursor. Key in the subscriberalias or ID and press .Advanced Features in Connect Plus Mode230English
The display shows Sending Message, confirmingyour message is being sent.If the message is sent successfully, a tone soundsand the display shows Message Sent.If the message cannot be sent, a low tone soundsand the display shows Message Send Failed.If the text message cannot be sent, it is moved tothe Sent Items folder and marked with a SendFailed icon.Deleting a Saved Text Message from Drafts1Access the Text Message feature.Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Drafts and press toselect.3 or to the required message and press to select.4 or to Delete and press to deletethe text message.Managing Fail-to-Send Text MessagesYou can select one of the following options while atthe Resend option screen:• Resend• Forward• EditResending a Text MessagePress to resend the same message to thesame subscriber/group alias or ID.If the message is sent successfully, a tone soundsand the display shows the positive mini notice.Advanced Features in Connect Plus Mode231English
If the message cannot be sent, the display showsthe negative mini notice.Forwarding a Text MessageSelect Forward to send the message to anothersubscriber/group alias or ID.1 or to Forward and press toselect.2Select the message recipient by or tothe required alias or ID and press to select.The display shows Sending Message, confirmingyour message is being sent.If the message is sent successfully, a tone soundsand the display shows Message Sent.If the message cannot be sent, a low tone soundsand the display shows Message Send Failed.Managing Sent Text MessagesOnce a message is sent to another radio, it is savedin Sent Items. The most recent sent text message isalways added to the top of the Sent Items list.The Sent Items folder is capable of storing amaximum of thirty (30) last sent messages. When thefolder is full, the next sent text message automaticallyreplaces the oldest text message in the folder.Note:Long press at any time to return to theHome screen.Viewing a Sent Text Message1Access the Text Message feature.RadioControlsStepsProgram-med TextMessagebuttonPress the programmed Text Mes-sage button.Menu 1 to access the menu.2 or to Messages andpress to select.Advanced Features in Connect Plus Mode232English
2 or to Sent Items and press toselect.3 or to the required message and press to select.The icon at the top right corner of the screenindicates the status of the message (see Sent ItemIcons on page 186).Sending a Sent Text MessageYou can select one of the following options whileviewing a sent text message:• Resend• Forward• Edit• Delete1Press again while viewing the message.2 or to one of the following options andpress to select.Option StepsForward Select Forward to send the selectedtext message to another subscriber/group alias or ID (see Forwarding aText Message on page 232).Delete Select Delete to delete the textmessage.Resend Select Resend to resend the select-ed text message to the same sub-scriber/group alias or ID.The display shows Sending Mes‐sage, confirming that the same mes-sage is being sent to the same tar-get radio.If the message is sent successfully,a tone sounds and the displayshows Message Sent.If the message cannot be sent, alow tone sounds and the displayshows Message Send Failed.Advanced Features in Connect Plus Mode233English
Option StepsIf the message fails to send, the ra-dio returns you to the Resend optionscreen. Press to resend themessage to the same subscriber/group alias or ID.Note:If you exit the messagesending screen while themessage is being sent, theradio updates the status ofthe message in the SentItems folder without provid-ing any indication in the dis-play or via sound.Note:If the radio changes mode orpowers down before the sta-tus of the message in SentItems is updated, the radiocannot complete any In-Progress messages and au-tomatically marks it with aSend Failed icon.Option StepsNote:The radio supports a maxi-mum of five (5) In-Progressmessages at one time. Dur-ing this period, the radiocannot send any new mes-sage and automaticallymarks it with a Send Failedicon.If you exit the message sending screen while themessage is being sent, the radio updates thestatus of the message in the Sent Items folderwithout providing any indication in the display orvia sound.If the radio changes mode or powers down beforethe status of the message in Sent Items isupdated, the radio cannot complete any In-Progress messages and automatically marks itwith a Send Failed icon.The radio supports a maximum of five (5) In-Progress messages at one time. During thisAdvanced Features in Connect Plus Mode234English
period, the radio cannot send any new messageand automatically marks it with a Send Failed icon.Deleting All Sent Text Messages from Sent Items1Access the Text Message feature by performingone of the following actions:Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Sent Items and press toselect.When you select Sent Items and it contains notext messages, the display shows List Empty,and sounds a low tone if Keypad Tones are turnedon (see Turning Keypad Tones On or Off on page141).3 or to Delete All and press toselect.4Choose one of the following.• or to Yes and press to select.The display shows positive mini notice.• or to No and press to returnto the previous screen.Receiving a Text MessageWhen your radio receives a message, the displayshows the Notification List with the alias or ID of thesender and the Message icon.You can select one of the following options whenreceiving a text message:• Read• Read Later• DeleteAdvanced Features in Connect Plus Mode235English
Reading a Text Message1 or to Read? and press to select.Selected message in the Inbox opens.2Do one of the following:•Press to return to the Inbox.•Press a second time to reply, forward, ordelete the text message.Managing Received Text MessagesUse the Inbox to manage your text messages. TheInbox is capable of storing a maximum of 30messages.Text messages in the Inbox are sorted according tothe most recently received.Your radio supports the following options for textmessages:• Reply (via Quick Text)• Forward• Delete• Delete AllNote:If the channel type is not a match, you canonly forward, delete, or delete all Receivedmessages.Long press at any time to return to theHome screen.Viewing a Text Message from the Inbox1 to access the menu.2 or to Messages and press toselect.3 or to Inbox and press to select.4 or toview the messages.5Do one of the following:•Press to select the current message, andpress again to reply, forward, or deletethat message.Advanced Features in Connect Plus Mode236English
•Long press to return to the Home screen.Replying to a Text Message from the Inbox1Access the Text Message feature.RadioControlsStepsProgram-med TextMessagebuttonPress the programmed Text Mes-sage button.Menu 1 to access the menu.2 or to Messages andpress to select.2 or to Inbox and press to select.3 or to the required message and press to select.4Press once more to access the sub-menu.5Use your keypad to write/edit your message.6Press once message is composed.The display shows Sending Message, confirmingyour message is being sent.If the message is sent successfully, a tone soundsand the display shows Message Sent.If the message cannot be sent, a low tone soundsand the display shows Message Send Failed.If the message cannot be sent, the radio returnsyou to the Resend option screen (see ManagingFail-to-Send Text Messages on page 231).Deleting a Text Message from the Inbox1Access the Text Message feature by performingone of the following actions:Advanced Features in Connect Plus Mode237English
Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Inbox and press to select.3 or to the required message and press to select.4Press once more to access the sub-menu.5 or to Delete and press toselect.6 or to Yes and press to select.The display shows Message Deleted, and thescreen returns to the Inbox.Deleting All Text Messages from the Inbox1Access the Text Message feature by performingone of the following actions:Radio Con-trolsStepsProgrammedText MessagebuttonPress the programmed TextMessage button.Menu 1 to access the menu.2 or to Messagesand press to select.2 or to Inbox and press to select.When you select Inbox and it contains no textmessages, the display shows List Empty, andsounds a low tone if Keypad Tones are turned onAdvanced Features in Connect Plus Mode238English
(see Turning Keypad Tones On or Off on page141).3 or to Delete All and press toselect.4 or to Yes and press to select.The display shows Inbox Cleared.PrivacyIf enabled, this feature helps to preventeavesdropping by unauthorized users on a channelby the use of a software-based scrambling solution.The signaling and user identification portions of atransmission are not scrambled.Your radio must have privacy enabled on the currentchannel selector position to send a privacy-enabledtransmission, although this is not a necessaryrequirement for receiving a transmission. While on aprivacy-enabled channel selector position, the radio isstill able to receive clear (unscrambled)transmissions.Your radio supports Enhanced Privacy.To unscramble a privacy-enabled call transmission,your radio must be programmed to have the sameKey Value and Key ID (for Enhanced Privacy) as thetransmitting radio.If your radio receives a scrambled call that is of adifferent Key Value and Key ID, you hear nothing atall (Enhanced Privacy).If the radio has a privacy type assigned, the Homescreen shows the Secure or Unsecure icon, exceptwhen the radio is sending or receiving an Emergencycall or alarm.The LED lights up solid green while the radio istransmitting and blinks green rapidly when the radio isreceiving an ongoing privacy-enabled transmission.You can access this feature by performing one of thefollowing actions:• Press the programmed Privacy button to toggleprivacy on or off.• Using the Radio Menu as described by the stepsdescribed next.Advanced Features in Connect Plus Mode239English
Note:Some radio models may not offer this Privacyfeature. Check with your dealer or systemadministrator for more information.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings or or to Connect Plus and press to select.4 or to Enhanced Privacy.If the display shows Turn On, press toenable Privacy. The radio displays a messageconfirming your selection.If the display shows Turn Off, press todisable Privacy. The radio displays a messageconfirming your selection.If the radio has a privacy type assigned, thesecure or unsecure icon appears on the statusbar, except when the radio is sending or receivingan Emergency Alert.Making a Privacy-Enabled (Scrambled) CallToggle privacy on using the programmed privacybutton or by using the menu. Your radio must havethe Privacy feature enabled for the currently selectedchannel position to send a privacy-enabledtransmission. When privacy is enabled for thecurrently selected channel position, all voicetransmissions made by your radio will be scrambled.This includes Group Call, Multigroup Call, talk-backduring scanned calls, Site All Call, Emergency Call,and Private Call. Only receiving radios with the sameKey Value and Key ID as your radio will be able tounscramble the transmission.SecurityYou can enable or disable any radio in the system.For example, you might want to disable a stolenradio, to prevent the thief from using it, and enablethat radio, when it is recovered.Advanced Features in Connect Plus Mode240English
Note:Performing Radio Disable and Enable islimited to radios with these functions enabled.Check with your dealer or systemadministrator for more information.Radio Disable1Access this feature byRadioControlsStepsRadio Dis-able but-ton1Press the programmed RadioDisable button.2 or to the requiredalias or ID and press to se-lect.Radiomenu 1 to access the menu.2 or to Contacts andpress to select. The entriesare alphabetically sorted.RadioControlsSteps3Use one of the steps describednext to select the required sub-scriber alias or ID:• Select the required alias or IDdirectly.• or to the re-quired alias or ID andpress to select.•Use the Manual Dial menu• or to ManualDial and press toselect.• or to RadioNumber and press toselect.Advanced Features in Connect Plus Mode241English
RadioControlsSteps• The first line of the displayshows Radio Number:.The second line of the dis-play shows a blinking cur-sor. Use the keypad to en-ter the subscriber alias orID and press .4 or to Radio Disa‐ble and press to select.The display shows Radio Disable: <TargetAlias or ID> and the LED blinks green.2Wait for acknowledgement.If successful, a positive indicator tone sounds andthe display shows Radio Disable Successful.If not successful, a negative indicator tone soundsand the display shows Radio Disable Failed.Radio Enable1Access this feature byRadioCon-trolsStepsRadioEnablebutton1Press the programmed Radio Ena-ble button.2 or to the required aliasor ID and press to select.Radiomenu 1 to access the menu.2 or to Contacts andpress to select. The entriesare alphabetically sorted.3Use one of the steps described nextto select the required subscriberalias or ID• Select the required alias or ID di-rectly.Advanced Features in Connect Plus Mode242English
RadioCon-trolsSteps• or to the requiredalias or ID and press toselect.•Use the Manual Dial menu• or to Manual Di‐al and press to select.• or to Radio Num‐ber and press to select.• The first line of the displayshows Radio Number:. Thesecond line of the displayshows a blinking cursor. Usethe keypad to enter the sub-scriber alias or ID and press.RadioCon-trolsSteps4 or to Radio Enableand press to select.The display shows Radio Enable: <SubscriberAlias or ID> and the LED lights up solid green.2Wait for acknowledgement.If successful, a positive indicator tone sounds andthe display shows Radio Enable Successful.If not successful, a negative indicator tone soundsand the display shows Radio Enable Failed.Bluetooth OperationNote:If disabled via the CPS, all Bluetooth-relatedfeatures are disabled and the Bluetooth devicedatabase is erased.Advanced Features in Connect Plus Mode243English
This feature allows you to use your radio with aBluetooth-enabled device (accessory) via a wirelessBluetooth connection. Your radio supports bothMotorola and COTS (Commercially available Off-The-Shelf) Bluetooth-enabled devices.Bluetooth operates within a range of 10 meters (32feet) line of sight. This is an unobstructed pathbetween your radio and your Bluetooth-enableddevice.It is not recommended that you leave your radiobehind and expect your Bluetooth-enabled device towork with a high degree of reliability when they areseparated.At the fringe areas of reception, both voice and tonequality will start to sound “garbled” or “broken”. Tocorrect this problem, simply position your radio andBluetooth-enabled device closer to each other (withinthe 10-meter/32 feet defined range) to re-establishclear audio reception. Your radio’s Bluetooth functionhas a maximum power of 2.5 mW (4 dBm) at the 10-meter/32 feet range.Your radio can support up to 4 simultaneousBluetooth connections with Bluetooth-enableddevices of unique types. For example, a headset, anda PTT-Only Device (POD). Multiple connections withBluetooth-enabled devices of the same type are notsupported.Refer to your respective Bluetooth-enabled device’suser manual for more details on your Bluetooth-enabled device’s full capabilities.Turning Bluetooth On and Off1 to access the menu.2 or to Bluetooth and press toselect.3 or to My Status and press toselect.The display shows On and Off. The current statusis indicated by a .4Do one of the following:• or to On and press to select.The display shows On and a appears left ofthe selected status.Advanced Features in Connect Plus Mode244English
• or to Off and press to select.The display shows Off and a appears left ofthe selected status.Finding and Connecting to a Bluetooth DeviceDo not turn off your Bluetooth-enabled device orpress during the finding and connectingoperation as this cancels the operation.1Turn on your Bluetooth-enabled device and placeit in pairing mode. Refer to respective Bluetooth-enabled device’s user manual.2On your radio, press to access the menu.3 or to Bluetooth and press toselect.4 or to Devices and press toselect.5Do one of the following:• or to the required device and press to select.• or to Find Devices to locateavailable devices. or to the requireddevice and press to select.6 or to Connect and press toselect.Display shows Connecting to <Device>. YourBluetooth-enabled device may require additionalsteps to complete the pairing. Refer to respectiveBluetooth-enabled device’s user manual.If successful, the radio display shows<Device>Connected. A tone sounds and appearsbesides the connected device. The BluetoothConnected icon appears on the status bar.If unsuccessful, the radio display shows ConnectingFailed.Advanced Features in Connect Plus Mode245English
Note:If pin code is required, use the same entrymethod as Step 2 in Accessing the Radio fromPassword on page 170.Finding and Connecting from a Bluetooth Device(Discoverable Mode)Do not turn off your Bluetooth or your radio during thefinding and connecting operation as this may cancelthe operation.1Turn Bluetooth On.See Turning Bluetooth On and Off on page 107.2 to access the menu.3 or to Bluetooth and press toselect.4 or to Find Me and press toselect.Your radio can now be found by other Bluetooth-enabled devices for a programmed duration. Thisis called Discoverable Mode.5Turn on your Bluetooth-enabled device and pair itwith your radio.Refer to respective Bluetooth-enabled device’suser manual.Disconnecting from a Bluetooth Device1On your radio, press to access the menu.2 or to Bluetooth and press toselect.3 or to Devices and press toselect.4 or to the required device and press to select.5 or to Disconnect and press toselect.Display shows Disconnecting from <Device>.Your Bluetooth-enabled device may requireAdvanced Features in Connect Plus Mode246English
additional steps to disconnect. Refer to respectiveBluetooth-enabled device’s user manual.The radio display shows <Device> Disconnected. Apositive indicator tone sounds and disappearsbeside the connected device. The BluetoothConnected icon disappears on the status bar.Switching Audio Route between Internal Radio Speakerand Bluetooth DeviceYou can toggle audio routing between internal radiospeaker and external Bluetooth-enabled accessory.Press the programmed Bluetooth Audio Switchbutton.•A tone sounds and display shows Route Audioto Radio.•A tone sounds and display shows Route Audioto Bluetooth.Viewing Device Details1 to access the menu.2 or to Bluetooth and press toselect.3 or to Devices and press toselect.4 or to the required device and press to select.5 or to View Details and press to select.Deleting Device NameYou can remove a disconnected device from the listof Bluetooth-enabled devices.1 to access the menu.2 or to Bluetooth and press toselect.Advanced Features in Connect Plus Mode247English
3 or to Devices and press toselect.4 or to the required device and press to select.5 or to Delete and press toselect.The display shows Device Deleted.Bluetooth Mic GainAllows control of the connected Bluetooth-enableddevice’s microphone gain value.1 to access the menu.2 or to Bluetooth and press toselect.3 or to BT Mic Gain and press toselect.4 or to the BT Mic Gain type and thecurrent values.To edit values, press to select.5 or to increase or to decrease valuesand press to select.Notification ListYour radio has a Notification List that collects all your“unread” events on the channel, such as unread textmessages, missed calls, and call alerts.The Notification icon appears on the status bar whenthe Notification List has one or more events.The list supports a maximum of forty (40) unreadevents. When it is full, the next event automaticallyreplaces the oldest event.Note:After the events are read, they are removedfrom the Notification List.Advanced Features in Connect Plus Mode248English
Accessing the Notification List1 to access the menu.2 or to Notification and press to select.3 or to the required event and press to select.Long press to return to the Home Screen.Wi-Fi OperationWi-Fi® is a registered trademark of Wi-Fi Alliance®.Note:This feature is applicable to XPR 5550e/XPR5580e only.This feature allows you to setup and connect to a Wi-Fi® network. Wi-Fi supports updates for radiofirmware, codeplug, and resources such as languagepacks and voice announcement.Turning Wi-Fi On or OffNote:This feature is applicable to XPR 5550e/XPR5580e only.The programmed Wi-Fi On or Off button isassigned via CPS. Check with your dealer orsystem administrator to determine how yourradio has been programmed.You can turn on or turn off Wi-Fi® by performing oneof the following actions.•Press the programmed Wi-Fi On or Off button.Voice Announcement sounds Turning On Wi-Fi orTurning Off Wi-Fi.•Access this feature via the menu.a) Press to access the menu.b) Press or to WiFi and press to select.c) Press or to WiFi Status andpress to select.Advanced Features in Connect Plus Mode249English
Press to turn on Wi-Fi. The display shows beside Enabled.Press to turn off Wi-Fi. The disappearsfrom beside Enabled.Connecting to a Network Access PointNote:This feature is applicable to XPR 5550e/XPR5580e only.When you turn on Wi-Fi®, the radio scans andconnects to a network access point.You can also connect to a network access point viathe menu.1Press to access the menu.2Press or to WiFi and press toselect.3Press or to Networks and press to select.4Press or to a network access pointand press to select.5Press or to Connect and press to select.6Enter the password and press .When the connection is successful, the radiodisplays a notice and the network access point issaved into the profile list.Refreshing the Network ListNote:This feature is applicable to XPR 5550e/XPR5580e only.•Perform the following actions to refresh thenetwork list.a) Press to access the menu.b) Press or to WiFi and press to select.Advanced Features in Connect Plus Mode250English
c) Press or to Networks and press to select.When you enter the Networks menu, the radioautomatically refreshes the network list.•If you are already in the Networks menu, performthe following action to refresh the network list.a) Press or to Refresh and press to select.The radio refreshes and displays the latestnetwork list.Adding a NetworkNote:This feature is applicable to XPR 5550e/XPR5580e only.If a preferred network is not in the available networklist, perform the following actions to add a network.1Press to access the menu.2Press or to WiFi and press toselect.3Press or to Networks and press to select.4Press or to Add Network and press to select.5Enter the Service Set Identifier (SSID) and press.6Press or to Open and press toselect.7Enter the password and press .The radio displays to indicate that thenetwork is successfully saved.Advanced Features in Connect Plus Mode251English
Viewing Details of Network Access PointsNote:This feature is applicable to XPR 5550e/XPR5580e only.Perform the following actions to view details ofnetwork access points.1Press to access the menu.2Press or to WiFi and press toselect.3Press or to Networks and press to select.4Press or to a network access pointand press to select.5Press or to View Details and press to select.For a connected network access point, the ServiceSet Identifier (SSID), Security Mode, MediaAccess Control (MAC) address, and InternetProtocol (IP) address are displayed.For a non-connected network access point, theService Set Identifier (SSID) and Security Modeare displayed.Removing Network Access PointsNote:This feature is applicable to XPR 5550e/XPR5580e only. Enterprise network access pointsthat are added via CPS can only be removedvia CPS.Perform the following actions to remove networkaccess points from the profile list.1Press to access the menu.2Press or to WiFi and press toselect.3Press or to Networks and press to select.Advanced Features in Connect Plus Mode252English
4Press or to the selected networkaccess point and press to select.5Press or to Remove and press toselect.6Press or to Yes and press toselect.The radio displays to indicate that theselected network access point is successfullyremoved.UtilitiesTurning the Radio Tones/Alerts On or OffYou can enable and disable all radio tones and alerts(except for the incoming Emergency alert tone) ifneeded.Press the programmed All Tones/Alerts button totoggle all tones on or off, or follow the proceduredescribed next to access this feature via the radiomenu.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Tones/Alerts and press to select.5 or to All Tones and press toselect.6Press to enable/disable all tones and alerts.The display shows beside Enabled.The disappears from beside Enabled.Advanced Features in Connect Plus Mode253English
Setting the Tone Alert Volume Offset LevelYou can adjust the Tone Alert Volume Offset level ifneeded. This feature adjusts the volume of the tones/alerts, allowing it to be higher or lower than the voicevolume.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Tones/Alerts and press to select.5 or to Vol. Offset and press toselect.6 or to the required volume value.The radio sounds a feedback tone with eachcorresponding volume value.7Do one of the following:•Press to keep the required displayedvolume value.•Press to exit without changing the currentvolume offset settings.Turning the Talk Permit Tone On or OffYou can enable and disable the Talk Permit Tone ifneeded.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.Advanced Features in Connect Plus Mode254English
4 or to Tones/Alerts and press to select.5 or to Talk Permit and press toselect.6Press to enable/disable the Talk PermitTone.The display shows beside Enabled.The disappears from beside Enabled.Turning the Power Up Alert Tone On or OffYou can enable and disable the Power Up Alert Toneif needed.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Tones/Alerts and press to select.5 or to Power Up and press toselect.6Press to enable/disable the Power Up AlertTone.The display shows beside Enabled.The disappears from beside Enabled.Setting the Power LevelYou can customize your radio’s power setting to highor low for each Connect Plus zone.High enables communication with tower sites inConnect Plus mode located at a considerabledistance from you. Low enables communication withtower sites in Connect Plus mode in closer proximity.Advanced Features in Connect Plus Mode255English
Press the programmed Power Level button to toggletransmit power level between high and low.Follow the procedure described next to access thisfeature via the radio menu.1Press to access the menu.2Press or to Utilities and press to select.3Press or to Radio Settings andpress to select.4Press or to Power and press toselect.5Press or to the required setting andpress to select. appears beside selected setting. At any time,long press to return to the Home screen.Screen returns to the previous menu.Changing the Display ModeYou can change radio’s display mode between Dayor Night, as needed. This affects the color palette ofthe display.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Display and press toselect.The display shows Day Mode and Night Mode.5 or to the required setting and press to enable. appears besides selectedsetting.Advanced Features in Connect Plus Mode256English
Adjusting the Display BrightnessYou can adjust the display brightness of the radio asneeded.Note:Display brightness cannot be adjusted whenAuto Brightness is enabled.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Display and press toselect.5 or to Brightness and press toselect.The display shows a progress bar.6Decrease display brightness by pressing orincrease the display brightness by pressing .Select from setting of 1 to 8. Press toconfirm your entry.Turning the Introduction Screen On or OffYou can enable and disable the Introduction Screen ifneeded.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Display and press toselect.Advanced Features in Connect Plus Mode257English
5 or to Intro Screen and press to select.6Press to enable/disable the IntroductionScreen.The display shows beside Enabled.The disappears from beside Enabled.LanguageYou can set your radio display to be in your requiredlanguage.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Languages and press toselect.5 or to the required language and press to enable. appears beside selectedlanguage.Turning the LED Indicator On or OffYou can enable and disable the LED Indicator ifneeded.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to LED Indicator and press to select.Advanced Features in Connect Plus Mode258English
5Press to enable/disable the LED Indicator.The display shows beside Enabled.The disappears from beside Enabled.Identifying Cable TypeYou can select the type of cable your radio uses.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Cable Type and press toselect.5The current cable type is indicated by a .Voice AnnouncementThis feature enables the radio to audibly indicate thecurrent Zone or Channel the user has just assigned,or programmable button press. This audio indicatorcan be customized per customer requirements. Thisis typically useful when the user is in a difficultcondition to read the content shown on the display.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Voice Announcement and press to select.You can also use or to change the selected option.5Do one of the following:Advanced Features in Connect Plus Mode259English
•Press to enable Voice Announcement.The display shows beside Enabled.•Press to disable Voice Announcement.The disappears from beside Enabled.Menu TimerSet the period of time your radio stays in the menubefore it automatically switches to the Home screen.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Display and press toselect.5 or to Menu Timer and press toselect.6 or to the required setting and press to select.Turning Horns/Lights On or OffThis feature needs to be installed through your radio’srear accessory connector by your dealer.Your radio is able to notify you of an incoming call viathe horns and lights feature. When activated, anincoming call sounds your vehicle's horn and turns onits lights.Press the programmed Horns/Lights button to togglehorns and light feature on or off.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.Advanced Features in Connect Plus Mode260English
4 or to Horn/Lights and press toselect.5Press to enable/disable Horns/Lights.The display shows beside Enabled.The disappears from beside Enabled.Setting Dual Knob Operation PreferenceYour radio has a dual-purpose Volume/ChannelKnob. Disabling the dual-purpose option sets theknob to work as a Volume Knob only.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Dual Knob and press toselect.5The display shows Volume Only and Volume &Ch. or to the required setting andpress to select. appears beside selected setting.Screen returns to the previous menu.Digital Mic AGC (Mic AGC-D)This feature controls the your radio's microphone gainautomatically while transmitting on a digital system. Itsuppresses loud audio or boosts soft audio to apreset value in order to provide a consistent level ofaudio.1 to access the menu.2 or to Utilities and press toselect.Advanced Features in Connect Plus Mode261English
3 or to Radio Settings and press to select.4 or to Mic AGC-D and press toselect.5Do one of the following:•Press to enable Mic AGC-D. The displayshows beside Enabled.•Press to disable Mic AGC-D. The disappears from beside Enabled.Intelligent AudioYour radio can automatically adjust its audio volumeto overcome background noise in the environment,inclusive of all stationary and non-stationary noisesources. This feature is a Receive-only feature anddoes not affect Transmit audio.1 to access the menu.RadioCon-trolStepsMenu 1 to access the menu.2 or to Radio Settingsand press to select.3 or to Radio Settingsand press to select.4 or to Intelligent Au‐dio and press to select.Note:You can also use or tochange the selected option.5Do one of the following:•Press to enable IntelligentAudio. The display shows be-side Enabled.Advanced Features in Connect Plus Mode262English
RadioCon-trolSteps•Press to disable IntelligentAudio. The disappears from be-side Enabled.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to Intelligent Audio and press to select.5Do one of the following:•Press to enable Intelligent Audio. Thedisplay shows beside Enabled.•Press to disable Intelligent Audio. The disappears from beside Enabled.See Authorized Accessories List on page 277 forrecommended Bluetooth-enabled audio accessorieswith in-built Automatic Volume Control for similarperformance.Turning the Acoustic Feedback Suppressor Feature Onor OffThis feature allows you to minimize acoustic feedbackin received calls.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Settings and press to select.4 or to AF Suppressor and press to select.Advanced Features in Connect Plus Mode263English
You can also use or to change the selected option.5Do one of the following.•Press to enable Acoustic FeedbackSuppressor. The display shows besideEnabled.•Press to disable Acoustic FeedbackSuppressor. The disappears from besideEnabled.Turning GPS/GNSS On or OffGlobal Navigation Satellite System (GNSS) is asatellite navigation system that determines the radio’sprecise location. GNSS includes Global PositioningSystem (GPS), Global Navigation Satellite System(GLONASS), and BeiDou Navigation Satellite System(BDS).Press the programmed GPS/GNSS button to togglethe feature on or off.Note:Selected radio models may offer GPS,GLONASS, and BDS. GNSS constellation isconfigured via CPS. Check with your dealer orsystem administrator to determine how yourradio has been programmed.1Press to access the menu.2Press or to Utilities and press to select.3Press or to Radio Settings andpress to select.4Press or to GPS and press toselect.5Press to enable/disable GPS/GNSS.The display shows beside Enabled.The disappears from beside Enabled.See Checking the GPS/GNSS Information on page137 for details on retrieving GPS/GNSS information.Advanced Features in Connect Plus Mode264English
Accessing General Radio InformationYour radio contains information on the following:• Battery• Degree of Tilt (Accelerometer)• Radio Model Number Index• Option Board Over-the-Air (OTA) Codeplug CRC• Site Number• Site Info• Radio Alias and ID• Firmware and Codeplug Versions• GPS InformationPress at any time to return to the previousscreen or long press to return to the Homescreen. The radio exits the current screen once theinactivity timer expires.Checking the Radio Model Number IndexThis index number identifies your radio’s model-specific hardware. Your radio system administratormay ask for this number when preparing a newOption Board codeplug for your radio.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to Model Index and press toselect.The display shows the Model Number Index.Checking the CRC of the Option Board OTACodeplug FileFollow the instructions below if your radio systemadministrator asks you to view the Option Board OTACodeplug File CRC (Cyclic Redundancy Check). Thismenu option only appears if the Option Boardreceived its last codeplug update OTA.1 to access the menu.Advanced Features in Connect Plus Mode265English
2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to OB OTA CPcrc and press to select.The display shows some letters and numbers.Communicate this information to your radiosystem administrator exactly as shown.Displaying the Site ID (Site Number)Note:If you are not currently registered at a site, thedisplay shows Not Registered.The radio briefly shows the Site ID as it registers witha Connect Plus site. Following registration, the radiodoes not generally indicate the Site number. Todisplay the registered Site number, do the following:1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to Site Number and press toselect.The display shows the Network ID and the SiteNumber.Checking the Site InfoNote:If you are not currently registered at a site, thedisplay shows Not Registered.The Site Info feature provides information that can beuseful to a service technician. It consists of thefollowing information:• Repeater number of current Control Channelrepeater.• RSSI: Last signal strength value measured fromControl Channel repeater.Advanced Features in Connect Plus Mode266English
• Neighbor List sent by Control Channel repeater(five numbers separated by commas).If you are requested to use this feature, please reportthe displayed information exactly as it appears on thescreen.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to Site Info and press toselect.The display shows the Site Info.Checking the Radio IDThis feature displays the ID of your radio.Follow the procedure described next to access thisfeature via the radio screen.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to My ID and press to select.The display shows the radio ID.Checking the Firmware Version and CodeplugVersionDisplays the firmware version on your radio.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.Advanced Features in Connect Plus Mode267English
4 or to Versions and press toselect.The display a list with the following information:• (Radio) Firmware Version• (Radio) Codeplug Version• Option Board Firmware Version• Option Board Frequency Version• Option Board Hardware Version• Option Board Codeplug VersionChecking for UpdatesConnect Plus provides the ability to update certainfiles (Option Board Codeplug, Network FrequencyFile and Option Board Firmware File) over-the-air.Note:Check with the dealer or network administratorto determine whether this feature has beenenabled for your radio.Any display Connect Plus radio has the ability toshow its current Option Board OTA Codeplug CRC,Frequency File version or Option Board firmware fileversion via a menu option. In addition, display radiosthat have been enabled for over-the-air file transfercan display the version of a "pending file". A "pendingfile" is a Frequency File or Option Board firmware filethat the Connect Plus radio knows about via systemmessaging, but the radio has not yet collected all ofthe file’s packets. If a display Connect Plus radio hasa pending file, the menu provides options to:• See the version number of the pending file.• See what percentage of packets has beencollected so far.• Request the Connect Plus radio to resumecollecting file packets.If the radio is enabled for Connect Plus over-the-airfile transfer, there may be times when the radioautomatically joins a file transfer without first notifyingthe radio user. While the radio is collecting filepackets, the LED rapidly blinks red and the radiodisplays the High Volume Data icon on the HomeScreen status bar.Note:The Connect Plus radio cannot collect filepackets and receive calls at the same time. Ifyou wish to cancel the file transfer, press andrelease the PTT button. This causes the radioto request a call on the selected ContactName, and it will also cancel the file transferAdvanced Features in Connect Plus Mode268English
for that radio until the process resumes at alater time.There are several things that can make the filetransfer process start again. The first example appliesto all over-the-air file types. The other examples applyonly to the Network Frequency File and Option BoardFirmware File:• The radio system administrator re-initiates theover-the-air file transfer.• The Option Board's pre-defined timer expires,which causes the Option Board to automaticallyresume the process of collecting packets.• The timer has not yet expired, but the radio userrequests the file transfer to resume via the menuoption.After the Connect Plus radio finishes downloading allfile packets, it must upgrade to the newly acquiredfile. For the Network Frequency File, this is anautomatic process and does not require a radio reset.For the Option Board Codeplug File, this is anautomatic process that will cause a brief interruptionto service as the Option Board loads the newcodeplug information and re-acquires a network site.How quickly the radio upgrades to a new OptionBoard firmware file depends on how the radio hasbeen configured by the dealer or systemadministrator. The radio will either upgradeimmediately after collecting all file packets, or it willwait until the next time that the user turns the radioon.Note:Check with your dealer or systemadministrator to determine how your radio hasbeen programmed.The process of upgrading to a new Option Boardfirmware file takes several seconds, and it requiresthe Connect Plus Option Board to reset the radio.Once the upgrade starts, the radio use will not beable to make or receive calls until the process iscompleted.Firmware FileFirmware Up to DateNote:If the Option Board firmware file is not Up toDate (and if the radio has partially collected amore recent Option Board firmware fileversion) the radio displays a list with additionaloptions; Version, %Received, and Download.Advanced Features in Connect Plus Mode269English
1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to Updates and press toselect.5 or to Firmware and press toselect.The display shows Firmware is Up to Date.Pending Firmware – Version1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to Updates and press toselect.5 or to Firmware and press toselect.6 or to Version and press toselect.If there is a pending Option Board firmware file,the display shows the pending firmware versionnumber.If there is a pending Option Board firmware file,the display shows Firmware is Up to Date.Pending Firmware – % Received1 to access the menu.Advanced Features in Connect Plus Mode270English
2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to Updates and press toselect.5 or to Firmware and press toselect.6 or to %Received and press toselect.The screen displays the percentage of firmwarefile packets collected so far.Note:When at 100%, the radio needs to bepower cycled Off and then On to initiate thefirmware upgrade.Pending Firmware – DownloadIf the Connect Plus radio has previously left an OTAOption Board Firmware File Transfer with a partialfile, the unit automatically rejoins the file transfer (ifstill ongoing) when an internal timer expires. If youwant the unit to rejoin an ongoing Option BoardFirmware File transfer prior to expiration of thisinternal timer, use the Download option as describedbelow.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to Updates and press toselect.5 or to Firmware and press toselect.Advanced Features in Connect Plus Mode271English
6 or to Download and press toselect.The display shows the following:Download Available Start DownloadNo Download Availa-bleDownload not availa‐ble7Do one of the following:•Select Yes and press to start thedownload.•Select No and press to return to theprevious menu.Frequency FileFrequency File Up to DateNote:If the Frequency File is not Up to Date (and ifthe radio has partially collected a more recentfrequency file version) the radio displays a listwith additional options; Version, %Received,and Download.1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to Frequency and press toselect.The display shows Freq. File is Up to Date.Frequency File Pending – Version1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.Advanced Features in Connect Plus Mode272English
4 or to Updates and press toselect.5 or to Frequency and press toselect.6 or to Version and press toselect.If there is a pending Frequency File, the displayshows the pending Frequency File versionnumber.Frequency File Pending – % Received1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to Updates and press toselect.5 or to %Received and press toselect.The screen displays the percentage of frequencyfile packets collected so far.Frequency File Pending – DownloadIf the Connect Plus radio has previously left an OTANetwork Frequency File Transfer with a partial file,the unit automatically rejoins the file transfer (if stillongoing) when an internal timer expires. If you wantthe unit to rejoin an ongoing Network Frequency Filetransfer prior to expiration of this internal timer, usethe Download option as described below.1 to access the menu.2 or to Utilities and press toselect.Advanced Features in Connect Plus Mode273English
3 or to Radio Info and press toselect.4 or to Updates and press toselect.5 or to Frequency and press toselect.6 or to Download and press toselect.Download CurrentlyUnavailableDownload not avail‐ableDownload CurrentlyAvailableStart Download7Do one of the following:•Select Yes and press to start the download.•Select No and press to return to the previousmenu.Checking the GPS/GNSS InformationDisplays the GPS/GNSS information on your radio,such as values of:• Latitude• Longitude• Altitude• Direction• Velocity• Horizontal Dilution of Precision (HDOP)• Satellites• Version1 to access the menu.2 or to Utilities and press toselect.3 or to Radio Info and press toselect.4 or to GPS Info and press toselect.Advanced Features in Connect Plus Mode274English
5 or to the required item and press to select.The display shows the requested GPS/GNSSinformation.See Turning GPS/GNSS On or Off on page 134 fordetails on GPS/GNSS.Advanced Features in Connect Plus Mode275English
AccessoriesAccessories276English
Authorized Accessories ListAntennas• VHF, 136 – 144 MHz, 1/4 Wave, Through-HoleMount, Mini-U (HAD4006_)• VHF, 146 – 150.8 MHz, 1/4 Wave, Through-HoleMount, Mini-U (HAD4007_)• VHF, 150.8 – 162 MHz, 1/4 Wave, Through-HoleMount, Mini-U (HAD4008_)• VHF, 162 – 174 MHz, 1/4 Wave, Through-HoleMount, Mini-U (HAD4009_)• VHF, 132 – 174 MHz, 3.0 dB Gain, Through-HoleMount, Mini-U (HAD4022_)• UHF, 403 – 430 MHz, 1/4 Wave, Through-HoleMount, Mini-U (HAE4002_)• UHF, 450 – 470 MHz, 1/4 Wave, Through-HoleMount, Mini-U (HAE4003_)• UHF, 470 – 527 MHz, 1/4 Wave, Through-HoleMount, Mini-U (HAE4004_)• UHF, 406 – 420 MHz, 3.5 dB Gain, Through-HoleMount, Mini-U (HAE4010_)• UHF, 450 – 470 MHz, 3.5 dB Gain, Through-HoleMount, Mini-U (HAE4011_)• UHF, 470 – 494 MHz, 3.5 dB Gain, Through-HoleMount, Mini-U (HAE4012_)• UHF, 494 – 512 MHz, 3.5 dB Gain, Through-HoleMount, Mini-U (HAE4013_)• Fixed Mount GPS Active Antenna (PMAN4000_)• Window Mount GPS Active Antenna(PMAN4001_)• Magnetic Mount GPS Active Antenna(PMAN4002_)• Combination GPS+RF, Base Only, Through-holeMount, Mini-U (PMAN4004_)• UHF, 403 – 527 MHz, 2.0 dB Gain, Through-HoleMount, Mini-U (HAE6022_)• Combination GPS+RF, 806 – 941 MHz, 1/4 Wave,Through-Hole Mount, Mini-U (HAF4029_)• Combination GPS+RF, 806 – 941 MHz, 3.0 dBGain, Through-Hole Mount, Mini-U (HAF4030_)• Combination GPS+RF, 806 – 941 MHz, 5.0 dBGain, Through-Hole Mount, Mini-U (HAF4032_)• Combination GPS+RF, 806 – 941 MHz, 5.0 dBGain, Through-Hole Mount, Mini-U (HAF4033_)• UHF, 445 – 470 MHz, 5.0 dB Gain, Through-HoleMoun, Mini-U (with base) (RAE4004_RB)• UHF, 445 – 470 MHz, 5.0 dB Gain, Through-HoleMount, Mini-U (without base) (RAE4004_)Authorized Accessories List277English
• Combination GPS/VHF, 136 – 144 MHz, 1/4Wave, Through-Hole Mount, Mini-U (RAD4214_)• Combination GPS/VHF, 146 – 150.8 MHz, 1/4Wave, Through-Hole Mount, Mini-U (RAD4215_)• Combination GPS/VHF, 150.8 – 162 MHz, 1/4Wave, Through-Hole Mount, Mini-U (RAD4216_)• Combination GPS/VHF, 162 – 174 MHz, 1/4Wave, Through-Hole Mount, Mini-U (RAD4217_)• Combination GPS/VHF, 146 – 172 MHz, 3.0 dBGain, Through-Hole Mount, Mini-U (RAD4218_)• Combination GPS/UHF, 403 – 527 MHz, 2.0 dBGain, Through-Hole Mount, Mini-U (HAE6019_)• Combination GPS/UHF, 470 – 527 MHz, 1/4Wave, Through-Hole Mount, Mini-U (HAE6020_)• Combination GPS/UHF, 470 – 494 MHz, 3.0 dBGain, Through-Hole Mount, Mini-U (HAE6024_)• Combination GPS/UHF, 494 – 512 MHz, 3.0 dBGain, Through-Hole Mount, Mini-U (HAE6026_)• Combination GPS/UHF, 403 – 430 MHz, 1/4Wave, Through-Hole Mount, Mini-U (PMAE4030_)• Combination GPS/UHF, 450 – 470 MHz, 1/4Wave, Through-Hole Mount, Mini-U (PMAE4031_)• Combination GPS/UHF, 406 – 420 MHz, 3.5 dBGain, Through-Hole Mount, Mini-U (PMAE4032_)• Combination GPS/UHF, 450 – 470 MHz, 3.5 dBGain, Through-Hole Mount, Mini-U (PMAE4033_)• Combination GPS/UHF, 450 – 470 MHz, 5.0 dBGain, Through-Hole Mount, Mini-U (PMAE4034_)• 800/900, 806 – 941 MHz, 1/4 Wave, Through-HoleMount, Mini-U (HAF4025_)• 800/900, 806 – 941 MHz, 3.0dB Gain, Through-Hole Mount, Mini-U (HAF4026_)• 800/900, 806 – 941 MHz, Stubby Antenna,Through-Hole Mount, Mini-U (HAF4013_)• 800/900, 806 – 941 MHz, 5.0dB Gain, Through-Hole Mount, Mini-U (HAF4027_)For use with base PMAN4004_ only:• UHF, 403 – 430 MHz, 1/4 Wave (PMAE4039_)• UHF, 450 – 470 MHz, 1/4 Wave (PMAE4041_)• UHF, 406 – 420 MHz, 3.5 dB Gain (PMAE4040_)• UHF, 450 – 470 MHz, 3.5 dB Gain (PMAE4042_)• UHF, 450 – 470 MHz, 5.0 dB Gain (PMAE4043_)• VHF, 162 – 174 MHz, 1/4 Wave (RAD4223_)• VHF, 150.8 – 162 MHz, 1/4 Wave (RAD4224_)• VHF, 146 – 150.8 MHz, 1/4 Wave (RAD4225_)• VHF, 136 – 144 MHz, 1/4 Wave (RAD4226_)• VHF, 146 – 172 MHz, 3.0 dB Gain (RAD4227_)Authorized Accessories List278English
• UHF, 470 – 527 MHz, 1/4 Wave, Through-HoleMount (HAE6030_)• UHF, 403 – 527 MHz, 2.0 dB Gain, Through-HoleMount (HAE6029_)• UHF, 470 – 494 MHz, 3.0 dB Gain, Through-HoleMount (HAE6028_)• UHF, 494 – 512 MHz, 3.0 dB Gain, Through-HoleMount (HAE6027_)Audio• Telephone Style Handset (HMN4098_)• Desktop Microphone (RMN5050_)• Compact Microphone (RMN5052_)• IMPRES 4-Way Navigation Keypad Microphone(RMN5127_)• Heavy Duty Microphone with Enhanced Audio(RMN5053_)• Visor Microphone with Enhanced Audio(RMN5054_)• Operations Critical Wireless Earpiece, 12” Cable(NNTN8125_)• Operations Critical Wireless Push-to-Talk POD(NNTN8127_)• Non-Secure Wireless Headset & Push-to-TalkDevice with Push-to-Talk Audio, 12-Inch Cable(NNTN8189_)• Bluetooth Accessory Kit, SP, 9.5” Cable(NNTN8190_)• Operations Critical Wireless Earpiece, 9.5” Cable(NNTN8126_)• Wireless Covert Kit, includes two sets of 2-WireEarbuds (1 Black and 1 White), 1-Wire Earbud(Black), and a 3.5 mm Adapter to plug into any off-the-shelf headphones (NNTN8296_) [7]• Wireless Neckloop Y-adapter and retention hookfor Completely Discreet Kit (NNTN8385_) [7]• HK200 Bluetooth Headset (89409N)• Compact Microphone Replacement Cable(3075336B07)• Heavy Duty/Keypad Microphone ReplacementCable (3075336B10)• Completely Discreet Earpiece Kit (RLN4922_) [7]• XBT Behind-the-Neck, Non-Secure WirelessHeavy Duty Headset (RLN6490_)• XBT Overhead, Non-Secure Wireless Heavy DutyHeadset (RLN6491_)• MOTOTRBO Bluetooth Accessory Kit with NAPower Supply (RLN6500_)Authorized Accessories List279English
• Swivel Earpiece with In-Line Microphone forBluetooth Accessory Kit Pod, Pack of 3(RLN6550_) [7]• Flexible Fit Swivel Earpiece with Boom Mic(PMLN7181_) [7]• Flexible Fit Swivel Earpiece with Boom Mic,Multipack (PMLN7203_) [7]Cables• Power Cable to Battery, 10-foot (3-metre) Cable,15 amp (1 – 25 Watt) (HKN4137_)• Power Cable to Battery, 10-foot (3-metre) Cable,20 amp (1 – 45 Watt) (HKN4191_)• Power Cable to Battery, 20-foot (6-metre) Cable,20 amp (1 – 45 Watt) (HKN4192_)• Mobile and Repeater Rear Accessory ConnectorUniversal Cable (PMKN4018_)• Ignition Sense Cable (RKN4136_)• Mobile Mic Extension Cable, 10 feet(PMKN4033_)• Mobile Mic Extension Cable, 20 feet(PMKN4034_)• Mobile Front (MMP) Programming Cable(HKN6184_)• MAP Programming Cable (PMKN4010_)• MAP Programming and Test Cable (PMKN4016_)• Remote Mount (3-metre) Cable (PMKN4143_)• Remote Mount (5-metre) Cable (PMKN4144_)Desktop Accessories• Radio Power Cable for GPN6145 (GKN6266_)• Desktop Tray without Speaker (GLN7318_)• Desktop Tray with Speaker (RSN4005_)• Switchmode Power Supply (1 – 25 Watt Models)(CE marked) (GPN6145_)• Power Supply and Cable (HPN4007_)• Hardware Kit for Rear Accessory Connector(PMLN5072_)• US Line Cord (3060665A04)• Euro Line Cord (3060665A05)• Power Cable, UK Plug (Straight) (3002695B05)7Your radio is compatible with the accessories listed here. Contact your dealer for details.Authorized Accessories List280English
Mounting Kits• In Dash (DIN) Mounting Kit (RLN6465_)• Low Profile Trunnion Kit (RLN6466_)• High Profile Trunnion Kit (RLN6467_)• Key Lock Trunnion Kit (RLN6468_)• Low Profile Trunnion – Bag (RLN6469_)• Remote Mount Transceiver Interface(PMLN6402_)• Remote Mount Control Head Interface(PMLN6403_)Speakers• 13-Watt External Speaker (RSN4002_)• 7.5-Watt External Speaker (RSN4003_)• 5-Watt External Speaker (RSN4004_)Miscellaneous Accessories• PL259/Mini-U Antenna Adapter, 8-foot (2.4-metre)Cable (HKN9557_)• Microphone Hang Up Clip (All Microphones)(HLN9073_)• Universal Microphone Hang Up Clip (AllMicrophones) (HLN9414_)• Push Button PTT (RLN5926_)• Emergency Footswitch (RLN5929_)• IMPRES Mobile MMP Non-PC Adapter(PMKN4072_)• IMPRES Mobile MAP Non-PC Adapter(PMKN4070_)• Surge Protector, Tower Mount Kit (DQT1)• Surge Protector, Coax Protector Bulkhead(DSISB50LNC2MA)• Generic Option Board (PMLN5718_S)• Operations Critical Wireless 1-Wire SurveillanceKit with translucent tube (PMLN7052_)Authorized Accessories List281English
Maritime Radio Use in the VHFFrequency RangeSpecial Channel AssignmentsEmergency ChannelIf you are in imminent and grave danger at sea andrequire emergency assistance, use VHF Channel 16to send a distress call to nearby vessels and theUnited States Coast Guard. Transmit the followinginformation, in this order:1“MAYDAY, MAYDAY, MAYDAY.”2“THIS IS _____________________, CALL SIGN__________.” State the name of the vessel indistress 3 times, followed by the call sign or otheridentification of the vessel, stated 3 times.3Repeat “MAYDAY” and the name of the vessel.4“WE ARE LOCATED AT_______________________.” State the positionof the vessel in distress, using any information thatwill help responders to locate you, e.g.:• latitude and longitude• bearing (state whether you are using true ormagnetic north)• distance to a well-known landmark• vessel course, speed or destination5State the nature of the distress.6Specify what kind of assistance you need.7State the number of persons on board and thenumber needing medical attention, if any.8Mention any other information that would behelpful to responders, such as type of vessel,vessel length and/or tonnage, hull color, etc.9“OVER.”10 Wait for a response.11 If you do not receive an immediate response,remain by the radio and repeat the transmission atintervals until you receive a response. Beprepared to follow any instructions given to you.Non-Commercial Call ChannelFor non-commercial transmissions, such as fishingreports, rendezvous arrangements, repair scheduling,or berthing information, use VHF Channel 9.Operating Frequency RequirementsA radio designated for shipboard use must complywith Federal Communications Commission Rule Part80 as follows:Maritime Radio Use in the VHF Frequency Range282English
• on ships subject to Part II of Title III of theCommunications Act, the radio must be capable ofoperating on the 156.800 MHz frequency.• on ships subject to the Safety Convention, theradio must be capable of operating:• in the simplex mode on the ship stationtransmitting frequencies specified in the156.025 – 157.425 MHz frequency band, and• in the semiduplex mode on the two frequencychannels specified in the table below.Note:Simplex channels 3, 21, 23, 61, 64, 81, 82,and 83 cannot be lawfully used by the generalpublic in US waters.Additional information about operatingrequirements in the Maritime Services can beobtained from the full text of FCC Rule Part 80and from the US Coast Guard.Table 1: VHF Marine Channel ListChannel Num-berFrequency (MHz)Transmit Receive1 156.050 160.6502 156.100 160.700* 156.150 160.7504 156.200 160.8005 156.250 160.8506 156.300 –7 156.350 160.9508 156.400 –9 156.450 156.45010 156.500 156.50011 156.550 156.55012 156.600 156.60013** 156.650 156.65014 156.700 156.70015** 156.750 156.75016 156.800 156.80017** 156.850 156.850Maritime Radio Use in the VHF Frequency Range283English
18 156.900 161.50019 156.950 161.55020 157.000 161.600* 157.050 161.65022 157.100 161.700* 157.150 161.75024 157.200 161.80025 157.250 161.85026 157.300 161.90027 157.350 161.95028 157.400 162.00060 156.025 160.625* 156.075 160.67562 156.125 160.72563 156.175 160.775* 156.225 160.82565 156.275 160.87566 156.325 160.92567** 156.375 156.37568 156.425 156.42569 156.475 156.47571 156.575 156.57572 156.625 –73 156.675 156.67574 156.725 156.72575 *** ***76 *** ***77** 156.875 –78 156.925 161.52579 156.975 161.57580 157.025 161.625* 157.075 161.675* 157.125 161.725* 157.175 161.775Maritime Radio Use in the VHF Frequency Range284English
84 157.225 161.82585 157.275 161.87586 157.325 161.92587 157.375 161.97588 157.425 162.025Note:* Simplex channels 3, 21, 23, 61, 64, 81, 82,and 83 cannot be lawfully used by thegeneral public in US waters.** Low power (1 W) only.*** Guard band.Note:A – in the Receive column indicates that thechannel is transmit only.Declaration of Compliance for the Use ofDistress and Safety FrequenciesThe radio equipment does not employ a modulationother than the internationally adopted modulation formaritime use when it operates on the distress andsafety frequencies specified in RSS-182 Section 7.3.Technical Parameters for Interfacing ExternalData SourcesRS232 USB SB9600Input Volt-age (VoltsPeak-to-peak)18V 3.6V 5VMax DataRate28 kb/s 12 Mb/s 9.6 kb/sImpedance 5000 ohm 90 ohm 120 ohmMaritime Radio Use in the VHF Frequency Range285English
Limited WarrantyMOTOROLA COMMUNICATION PRODUCTSI. WHAT THIS WARRANTY COVERS AND FORHOW LONG:MOTOROLA SOLUTIONS, INC. (“MOTOROLA”)warrants the MOTOROLA manufacturedCommunication Products listed below (“Product”)against defects in material and workmanship undernormal use and service for a period of time from thedate of purchase as scheduled below:Digital Mobile Radios 24 MonthsProduct Accessories 12 MonthsMOTOROLA, at its option, will at no charge eitherrepair the Product (with new or reconditioned parts),replace it (with a new or reconditioned Product), orrefund the purchase price of the Product during thewarranty period provided it is returned in accordancewith the terms of this warranty. Replaced parts orboards are warranted for the balance of the originalapplicable warranty period. All replaced parts ofProduct shall become the property of MOTOROLA.This express limited warranty is extended byMOTOROLA to the original end user purchaser onlyand is not assignable or transferable to any otherparty. This is the complete warranty for the Productmanufactured by MOTOROLA. MOTOROLAassumes no obligations or liability for additions ormodifications to this warranty unless made in writingand signed by an officer of MOTOROLA.Unless made in a separate agreement betweenMOTOROLA and the original end user purchaser,MOTOROLA does not warrant the installation,maintenance or service of the Product.MOTOROLA cannot be responsible in any way forany ancillary equipment not furnished by MOTOROLAwhich is attached to or used in connection with theProduct, or for operation of the Product with anyancillary equipment, and all such equipment isexpressly excluded from this warranty. Because eachsystem which may use the Product is unique,MOTOROLA disclaims liability for range, coverage, oroperation of the system as a whole under thiswarranty.Limited Warranty286English
II. GENERAL PROVISIONS:This warranty sets forth the full extent ofMOTOROLA'S responsibilities regarding the Product.Repair, replacement or refund of the purchase price,at MOTOROLA’s option, is the exclusive remedy.THIS WARRANTY IS GIVEN IN LIEU OF ALLOTHER EXPRESS WARRANTIES. IMPLIEDWARRANTIES, INCLUDING WITHOUT LIMITATION,IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE,ARE LIMITED TO THE DURATION OF THISLIMITED WARRANTY. IN NO EVENT SHALLMOTOROLA BE LIABLE FOR DAMAGES INEXCESS OF THE PURCHASE PRICE OF THEPRODUCT, FOR ANY LOSS OF USE, LOSS OFTIME, INCONVENIENCE, COMMERCIAL LOSS,LOST PROFITS OR SAVINGS OR OTHERINCIDENTAL, SPECIAL OR CONSEQUENTIALDAMAGES ARISING OUT OF THE USE ORINABILITY TO USE SUCH PRODUCT, TO THEFULL EXTENT SUCH MAY BE DISCLAIMED BYLAW.III. STATE LAW RIGHTS:SOME STATES DO NOT ALLOW THE EXCLUSIONOR LIMITATION OF INCIDENTAL ORCONSEQUENTIAL DAMAGES OR LIMITATION ONHOW LONG AN IMPLIED WARRANTY LASTS, SOTHE ABOVE LIMITATION OR EXCLUSIONS MAYNOT APPLY.This warranty gives specific legal rights, and theremay be other rights which may vary from state tostate.IV. HOW TO GET WARRANTY SERVICE:You must provide proof of purchase (bearing the dateof purchase and Product item serial number) in orderto receive warranty service and, also, deliver or sendthe Product item, transportation and insuranceprepaid, to an authorized warranty service location.Warranty service will be provided by MOTOROLAthrough one of its authorized warranty servicelocations. If you first contact the company which soldyou the Product (e.g., dealer or communicationservice provider), it can facilitate your obtainingwarranty service. You can also call MOTOROLA at1-800-927-2744 US/Canada.Limited Warranty287English
V. WHAT THIS WARRANTY DOES NOTCOVER:1Defects or damage resulting from use of theProduct in other than its normal and customarymanner.2Defects or damage from misuse, accident, water,or neglect.3Defects or damage from improper testing,operation, maintenance, installation, alteration,modification, or adjustment.4Breakage or damage to antennas unless causeddirectly by defects in material workmanship.5A Product subjected to unauthorized Productmodifications, disassembles or repairs (including,without limitation, the addition to the Product ofnon-MOTOROLA supplied equipment) whichadversely affect performance of the Product orinterfere with MOTOROLA's normal warrantyinspection and testing of the Product to verify anywarranty claim.6Product which has had the serial number removedor made illegible.7Rechargeable batteries if:• any of the seals on the battery enclosure ofcells are broken or show evidence oftampering.• the damage or defect is caused by charging orusing the battery in equipment or service otherthan the Product for which it is specified.8Freight costs to the repair depot.9A Product which, due to illegal or unauthorizedalteration of the software/firmware in the Product,does not function in accordance withMOTOROLA’s published specifications or the FCCcertification labeling in effect for the Product at thetime the Product was initially distributed fromMOTOROLA.10 Scratches or other cosmetic damage to Productsurfaces that does not affect the operation of theProduct.11 Normal and customary wear and tear.VI. PATENT AND SOFTWARE PROVISIONS:MOTOROLA will defend, at its own expense, any suitbrought against the end user purchaser to the extentthat it is based on a claim that the Product or partsinfringe a United States patent, and MOTOROLA willpay those costs and damages finally awarded againstLimited Warranty288English
the end user purchaser in any such suit which areattributable to any such claim, but such defense andpayments are conditioned on the following:1that MOTOROLA will be notified promptly inwriting by such purchaser of any notice of suchclaim,2that MOTOROLA will have sole control of thedefense of such suit and all negotiations for itssettlement or compromise, and3should the Product or parts become, or inMOTOROLA’s opinion be likely to become, thesubject of a claim of infringement of a UnitedStates patent, that such purchaser will permitMOTOROLA, at its option and expense, either toprocure for such purchaser the right to continueusing the Product or parts or to replace or modifythe same so that it becomes non-infringing or togrant such purchaser a credit for the Product orparts as depreciated and accept its return. Thedepreciation will be an equal amount per year overthe lifetime of the Product or parts as establishedby MOTOROLA.MOTOROLA will have no liability with respect to anyclaim of patent infringement which is based upon thecombination of the Product or parts furnishedhereunder with software, apparatus or devices notfurnished by MOTOROLA, nor will MOTOROLA haveany liability for the use of ancillary equipment orsoftware not furnished by MOTOROLA which isattached to or used in connection with the Product.The foregoing states the entire liability ofMOTOROLA with respect to infringement of patentsby the Product or any parts thereof.Laws in the United States and other countriespreserve for MOTOROLA certain exclusive rights forcopyrighted MOTOROLA software such as theexclusive rights to reproduce in copies and distributecopies of such MOTOROLA software. MOTOROLAsoftware may be used in only the Product in whichthe software was originally embodied and suchsoftware in such Product may not be replaced,copied, distributed, modified in any way, or used toproduce any derivative thereof. No other useincluding, without limitation, alteration, modification,reproduction, distribution, or reverse engineering ofsuch MOTOROLA software or exercise of rights insuch MOTOROLA software is permitted. No license isgranted by implication, estoppel or otherwise underMOTOROLA patent rights or copyrights.Limited Warranty289English
VII. GOVERNING LAW:This Warranty is governed by the laws of the State ofIllinois, U.S.A.Limited Warranty290English
Motorola Solutions, Inc.1303 East Algonquin RoadSchaumburg, Illinois 60196 U.S.A.MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2011–2015 Motorola Solutions, Inc. All rights reserved.November 2015www.motorolasolutions.com/mototrbo*68009504001*68009504001-GC

Navigation menu