Motorola Solutions 99FT3048 CM200/CM300 VHF Mobile Radio User Manual 96C22 O cvr
Motorola Solutions, Inc. CM200/CM300 VHF Mobile Radio 96C22 O cvr
Contents
exhibit 08b users guide cm300
96C22-O_cvr.qxd 7/2/2003 11:04 AM Page 1 MOTOROLA, the Stylized M Logo, and Radius are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2003. All rights reserved. Printed in U.S.A. MOTOROLA, le logotype au M stylisé et Radius sont enregistrés auprès du Bureau des marques et brevets des États-Unis. Tous les autres noms de produits et de services sont la propriété de leurs titulaires respectifs. © Motorola, Inc. 2003. Tous droits réservés. Imprimé aux États-Unis. CM300™ Commercial Series *6881096C22* Two-Way Radio User Guide 68P81096C22-O de la radio bidirectionnelle Manuel de l'utilisateur EnglishTOC.fm Page 0 Friday, July 11, 2003 11:13 AM COMPUTER SOFTWARE COPYRIGHTS The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. EnglishTOC.fm Page 1 Friday, July 11, 2003 11:13 AM Getting Started . . . . . . . . . . . . . . . . . . . . . .17 CONTENTS Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Safety and RF Exposure Compliance . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 5 Conventional Radio Systems . . . . . . . . . . . . CM300 Radio Features . . . . . . . . . . . . . . . . . Radio Wide Features . . . . . . . . . . . . . . . . Signaling Features . . . . . . . . . . . . . . . . . . Radio Overview . . . . . . . . . . . . . . . . . . . . . . 7 LED Indicators. . . . . . . . . . . . . . . . . . . . . . . . 8 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Optional Enhanced Keypad Microphone (RMN5029) . . . . . . . . . . . . . . . . . . . . . . . . . 9 Indicator Tones . . . . . . . . . . . . . . . . . . . . . . 11 Programmable Buttons . . . . . . . . . . . . . . . . 12 Menu Buttons . . . . . . . . . . . . . . . . . . . . . . . 15 Menu Button. . . . . . . . . . . . . . . . . . . . . . 15 Menu Scroll Buttons . . . . . . . . . . . . . . . . 15 Navigate the Menu . . . . . . . . . . . . . . . . . 15 CONTENTS Computer Software Copyrights . . . inside cover Turn the Radio On or Off . . . . . . . . . . . . . . .17 Adjust the Volume . . . . . . . . . . . . . . . . . . . .17 Select a Radio Channel . . . . . . . . . . . . . . . .17 Receive. . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Silent Monitor. . . . . . . . . . . . . . . . . . . . . .18 Open Squelch Monitor. . . . . . . . . . . . . . .18 Transmit . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Repeater or Talkaround Mode . . . . . . . . . . .19 Home Revert Memory Channel (1 & 2) . . . .20 Store Memory Channel (1 & 2) . . . . . . . . . . .20 Set Local or Distance Mode . . . . . . . . . . . . .20 VOX Operation . . . . . . . . . . . . . . . . . . . . . . .21 Program PL/DPL Codes . . . . . . . . . . . . . . . .21 Radio Calls . . . . . . . . . . . . . . . . . . . . . . . . .23 Selective Radio Inhibit . . . . . . . . . . . . . . . . .23 Receive a Selective Call . . . . . . . . . . . . . . . .23 Send a Selective Call . . . . . . . . . . . . . . . . . .23 Receive a Call Alert™ Page . . . . . . . . . . . . .24 Send a Call Alert Page . . . . . . . . . . . . . . . . .24 Repeater Access . . . . . . . . . . . . . . . . . . . . .25 Emergency Alerts . . . . . . . . . . . . . . . . . . . . .26 Send an Emergency Alert. . . . . . . . . . . . . . .26 Clear an Emergency Alert . . . . . . . . . . . . . .26 English CONTENTS EnglishTOC.fm Page 2 Friday, July 11, 2003 11:13 AM Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 User Settings . . . . . . . . . . . . . . . . . . . . . . . 47 Talkback . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Start System Scan . . . . . . . . . . . . . . . . . . . .27 Stop System Scan . . . . . . . . . . . . . . . . . . . .28 Start Auto Scan . . . . . . . . . . . . . . . . . . . . . .28 Stop Auto Scan. . . . . . . . . . . . . . . . . . . . . . .28 Delete a Nuisance Channel . . . . . . . . . . . . .29 Restore Channels to the Scan List . . . . .29 Edit a Scan List. . . . . . . . . . . . . . . . . . . . . . .29 Add or Delete Channels in a Scan List . . . . .30 Prioritize a Channel in a Scan List . . . . . . . .31 Set Squelch Level . . . . . . . . . . . . . . . . . . . . 49 Set Power Level . . . . . . . . . . . . . . . . . . . . . . 49 Option Board On/Off . . . . . . . . . . . . . . . . . . 50 Set the Backlight Intensity . . . . . . . . . . . . . . 50 Display the Software Version . . . . . . . . . . . . 51 Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Receive a Phone Call . . . . . . . . . . . . . . . . . .33 Make a Phone Call . . . . . . . . . . . . . . . . . . . .34 Edit the Phone List . . . . . . . . . . . . . . . . . . . .36 Add an Entry . . . . . . . . . . . . . . . . . . . . . .36 Delete an Entry . . . . . . . . . . . . . . . . . . . .37 Edit an Entry . . . . . . . . . . . . . . . . . . . . . .38 Edit Access/Deaccess Codes . . . . . . . . .39 Tone Preferences . . . . . . . . . . . . . . . . . . . .41 Tones On/Off . . . . . . . . . . . . . . . . . . . . . . . .43 Keypad On/Off Tones . . . . . . . . . . . . . . . . . .43 Call Tone Tagging . . . . . . . . . . . . . . . . . . . .44 Escalert. . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 English Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Limited Warranty . . . . . . . . . . . . . . . . . . . . . 53 Accessories . . . . . . . . . . . . . . . . . . . . . . . . 57 Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Alarm and Accessories . . . . . . . . . . . . . . . . 57 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Control Station . . . . . . . . . . . . . . . . . . . . . . . 58 Data - CES Wireless Technologies . . . . . . . 58 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Public Address . . . . . . . . . . . . . . . . . . . . . . . 59 Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . 59 00_SafetyNA.fm Page 3 Friday, July 11, 2003 11:11 AM SAFETY PRODUCT SAFETY AND RF EXPOSURE COMPLIANCE Caution Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. SAFETY ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 68P81095C99) to ensure compliance with RF energy exposure limits. For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: http://www.motorola.com/cgiss/ index.shtml. English 00_SafetyNA.fm Page 4 Friday, July 11, 2003 11:11 AM SAFETY Notes: English 00_Introduction.fm Page 5 Friday, July 11, 2003 11:11 AM INTRODUCTION CONVENTIONAL RADIO SYSTEMS Conventional radio systems typically refer to unit-to-unit communications through a single channel. Conventional systems also allow radio users to extend communication coverage by relaying their messages through a repeater. To ensure coordinated use by multiple users, each radio user must monitor the channel or repeater before transmitting to verify that the system is not currently busy. • • • • • • • Signaling Features • CM300 RADIO FEATURES • - PTT ID Encode/ Decode INTRODUCTION 32 Channels 8-Character Alphanumeric Display 4 Programmable Feature Buttons 2 Memory Channels Telephone Interconnect User-programmable Phone, Scan Lists, TPL/DPL MDC 1200 Signaling - Emergency Alert - Selective Radio Inhibit Radio Wide Features • • • • • • Option Board Expandability – Secure Voice/Scrambling – SmarTrunk II – DTMF Decode Busy Channel Lockout High/Low Power Settings Local/Distance Mode Time-Out Timer Monitor and Sticky Permanent Monitor System Scan with 2 Priority Levels and Revert Scan Quik-Call II Signaling - Call Alert - Selective Call - Radio Call List - Call Tone Tagging English 00_Introduction.fm Page 6 Friday, July 11, 2003 11:11 AM • DTMF Signaling INTRODUCTION - DTMF PTT ID Encode/Decode - DTMF Call Alert English - DTMF Selective Call 01_Overview.fm Page 7 Friday, July 11, 2003 11:27 AM RADIO OVERVIEW RADIO OVERVIEW Push-To-Talk (PTT) Button Channel Selector/ Menu Scroll Buttons Red/Yellow/Green LED Indicators Speaker On/Off/Volume Knob Display PERS4 CM300 P1 Microphone Jack Menu Buttons (P1, P2) P2 P3 P4 Programmable Buttons (P1, P2, P3, P4) English RADIO OVERVIEW 01_Overview.fm Page 8 Friday, July 11, 2003 11:27 AM LED INDICATORS DISPLAY Indicates power up, transmit, receive, scan, monitor status, channel busy, Call Alert™ receive/transmit, and Selective Call receive/ transmit. LED State/Color Indication The top row displays menu and radio status information: Radio Call Red Transmitting Flashing Red Receiving Flashing Red Channel Busy Flashing Green Symbol Signal Strength Scan Scanning for activity Call Alert Power Level Flashing Yellow Indicates receiving a Call Alert Yellow Indicates sending a Call Alert Monitor Selective Call Flashing Yellow Indicates receiving a Selective Call Yellow Indicates sending a Selective Call Yellow Scan While monitoring Indication The more bars, the stronger the signal being received by your radio. Low Power “ R” or High Power “ S” is activated. The selected channel is being monitored. Phone mode is selected. Phone Sticky Monitor/Open Squelch English PERS4 Indicates that the Scan feature has been activated. 01_Overview.fm Page 9 Thursday, July 24, 2003 4:14 PM Priority 1 Scan ( flashing) • Priority 2 Scan ( steady) • Talkaround Call Received Indication Indicates scan has stopped and landed on an active Priority 1 channel. Indicates scan has stopped and landed on an active Priority 2 channel. OPTIONAL ENHANCED KEYPAD MICROPHONE (RMN5029) Your radio may be ordered with an optional DTMF (Dual-Tone Multi-Frequency) microphone that has a direct entry keypad. This keypad microphone has three programmable buttons (A, B, C) below the keypad that can be programmed to conveniently activate select radio features. Microphone You are not transmitting through a repeater A Selective Call or Call Alert has been received. Not Used An Emergency Alarm is being sent. RADIO OVERVIEW Symbol DTMF Keypad Push-to-Talk (PTT) button Emergency An Option Board has been activated. Programmable Buttons (A, B, C) Option Board English 01_Overview.fm Page 10 Friday, July 11, 2003 11:27 AM RADIO OVERVIEW The keypad is used for: • Dialing a phone number. • Entering information when programming phone lists. • Directly accessing preprogrammed features (see page 13). Each key can generate several different characters. For example, to enter the character “C,” press the 2 button three times. (Refer to the Entering Characters Using the DTMF Microphone Keypad table.) 10 English Entering Characters Using the DTMF Microphone Keypad Number of Times Button is Pressed Button 01_Overview.fm Page 11 Friday, July 11, 2003 11:27 AM INDICATOR TONES Low pitched tone Self Test Pass Tone Self Test Fail Tone Positive Indicator Tone Programmable Buttons Scan Power Level Squelch Repeater/ Talkaround Positive Indicator Tone Start High Tight Does not use repeater Negative Indicator Tone Stop Low Normal Uses repeater Enabled Disabled Local/Distance Local Distance Sticky Monitor/ Open Squelch — Enabled Home Revert Memory Channel (1&2) — Enabled Story Memory Channel (1&2) — Stored Menu Mode — Accessed Radio Call — Enabled Scan List Edit — Enabled Speed Dial — Enabled VOX Negative Indicator Tone Good Key Press Bad Key Press RADIO OVERVIEW High pitched tone Some programmable buttons use tones to indicate one of two modes: 11 English RADIO OVERVIEW 01_Overview.fm Page 12 Friday, July 11, 2003 11:27 AM Programmable Buttons Positive Indicator Tone Negative Indicator Tone Phone Mode — Enabled Option Board Enabled Disabled Escalert Enabled Disabled PROGRAMMABLE BUTTONS Your radio has four programmable buttons. Your dealer/programmer can program these buttons as shortcuts to various radio features. Check with your dealer/programmer for a complete list of functions your radio supports. Programmable buttons include: • • The four front buttons (C, D, E, and F). The three buttons (A, B, and C) of the optional DTMF microphone. Some buttons can access up to two features, depending on the type of button press: • Short Press — quickly pressing and releasing the programmable buttons, or 12 English • Long Press — pressing and holding the programmable buttons for a preprogrammed period of time, or • Hold Down — pressing and holding down the programmable buttons while checking status or making adjustments. The table on page 13 summarizes the programmable features available and shows the page number where the feature is explained. In the “Button” column, have your dealer/ programmer record the name of the programmable button next to the feature that has been programmed to it. The dealer/programmer can use the abbreviations (P1, P2, P3, or P4) shown in the radio illustration on page 7. Also, where appropriate, have your dealer/ programmer indicate whether the button press requires a short press, a long press, or needs to be held down. 01_Overview.fm Page 13 Friday, July 11, 2003 11:27 AM Function Menu Mode Indicator — Short Press Long Press Hold Down D button enters Menu Mode and selects menu options. C button is automatically — Page Button 15 re-assigned to exit Menu Mode.† Volume Set Monitor — — Toggle silent monitor operation (also turn off open squelch monitor when it has been activated). — Sounds a tone for adjusting your radio’s volume level. Turn on open squelch monitor. 17 — 18 Repeater/ Talkaround Toggle between using a repeater or transmitting directly to another radio.† — 19 Home Revert Memory Channel (1&2) — Provides direct channel access. — — 20 Store Memory Channel (1&2) — Stores current channel. — 20 Local/Distance — — 20 † — Toggle between local mode and distance mode.† RADIO OVERVIEW Programmable Features This function is activated by EITHER a short OR a long press, but not both. 13 English RADIO OVERVIEW 01_Overview.fm Page 14 Friday, July 11, 2003 11:27 AM Programmable Features (Continued) Function Indicator Voice Operated Transmission (VOX) — Toggle VOX on and off.† — 21 Radio Call — Directly access the radio call menu.† — 23, 24 — 27, 29 Scan/Nuisance Channel Delete Toggle scan on and off. Long Press Hold Down Delete a nuisance channel while scanning. Page Button Edit Scan List — Directly access the Scan Edit menu to add, delete, or prioritize channels.† — 29 Phone Directly access Phone mode.† — 33,34 Speed Dial Directly Access Phone mode to quickly access phone list for speed dial.† — 35 Escalert On/Off — Toggles escalert on and off.† — 44 Squelch — Toggles squelch level between tight and normal squelch.† — 49 Power Level Toggle transmit power level between High and Low.† — 49 Option Board Toggle the option board on and off.† — 50 † 14 English Short Press This function is activated by EITHER a short OR a long press, but not both. 01_Overview.fm Page 15 Friday, July 11, 2003 11:27 AM MENU BUTTONS If preprogrammed by your dealer/programmer, the two front buttons (C and D) can be used, in conjunction with other programmable features, to access and select menu options (D); and exit menu mode (C). The D button can be preprogrammed by your dealer/programmer to either a short or long press to access the Menu Mode. Menu Scroll Buttons Used to scroll while in Menu Mode. Refer to the menu navigation chart for menu selectable features at the back of this manual. Exit the Menu While in Menu Mode, the C button is automatically assigned to completely exit the Menu Mode by a long press or by a series of short presses to exit from a sub-level of the menu hierarchy. The radio also exits the menu mode if there has been no inputs via the navigation buttons for the “Inactivity Time” or after a selection has been made. RADIO OVERVIEW Menu Button G or H to scroll through the sub-menu options. Select the option with a short press of the D button. Once you have exited Menu Mode, the C and D buttons return to normal programmable condition. Navigate the Menu G or H to scroll through the menu options. If you scroll past the last option, the selection wraps around and starts again. When you reach the required option, a short press of the D button selects that option and enters the Sub-menu. 15 English RADIO OVERVIEW 01_Overview.fm Page 16 Friday, July 11, 2003 11:27 AM Notes: 16 English 02_GetStarted.fm Page 17 Friday, July 11, 2003 11:03 AM ADJUST THE VOLUME GETTING STARTED TURN THE RADIO ON OR OFF On/Off/Volume Control Knob Turn the On/Off/Volume Control knob clockwise to increase the volume, or counterclockwise to decrease the volume. – or – Note: Your dealer/programmer can preprogram one of the programmable buttons to Volume Set. ON OFF Rotate the On/Off/ Volume Control knob clockwise. If power-up is successful, you will hear the Self-Test Pass Tone ( ) and see the green LED indicator and display icons light momentarily. If the radio fails to power up, you will hear the Self Test Fail Tone ). The radio will need to be returned for re-programming. Rotate the On/Off/ Volume Control knob counterclockwise until you hear a click and both the display and LED indicators turn off. Hold down the Volume Set button (see page 13). • You will hear a continuous tone. Turn the On/Off/Volume Control knob to the desired volume level. Release the Volume Set button. GETTING STARTED PERS4 SELECT A RADIO CHANNEL Up to a total of 32 channels can be programmed into your radio. Select a Channel G or H to select the desired channel. 17 English 02_GetStarted.fm Page 18 Friday, July 11, 2003 11:03 AM RECEIVE Turn your radio on. Adjust the radio’s volume, if necessary (see page 17). G or H to select the desired channel. GETTING STARTED • The red LED indicator flashes while your radio is receiving. A short press of the Monitor button cancels Silent Monitor mode and returns the radio to normal operation. Open Squelch Monitor To respond, hold the microphone vertically 1 to 2 inches (2.5 to 5 cm) from your mouth. Press the PTT button to talk; release it to listen. It is important to monitor traffic before transmitting to ensure that you do not “talk over” someone who is already transmitting. 18 You hear a high-pitched tone. Listen for voice activity. • A short press of the preprogrammed Monitor button places the radio in Silent Monitor mode. • Make sure the PTT button is released. MONITOR English Silent Monitor To place the radio in Open Squelch mode, press and hold the preprogrammed Monitor button until you hear a high-pitched tone. • If no activity is present, you will hear “white noise.” Momentarily press the Monitor button to return to normal operation. Note: Depending on how your radio has been programmed, per channel for transmit and receive conditions, when the microphone has been taken off-hook, the radio will go into Open Squelch mode. 02_GetStarted.fm Page 19 Monday, July 14, 2003 12:45 PM TRANSMIT Turn your radio on. G or H to select the desired channel. Hold the microphone vertically 1 to 2 inches (2.5 to 5 cm) from your mouth. Press the PTT button to talk. The red LED indicator lights steady while the call is being sent. Release the PTT button to listen. REPEATER OR TALKAROUND J MODE Talkaround Mode enables you to communicate with another radio when either: • Press the preprogrammed Repeater/ Talkaround button (see page 13) to toggle between Repeater Mode and Talkaround Mode. – or – D to enter menu mode. G or H until D to select the current setting. G or H until TALKARND – or – until REPEATER TALKARND GETTING STARTED • Select either Repeater Mode or Talkaround Mode D to select the current setting. The repeater is not operating. – or – • Your radio is out of the repeater’s range but within communicating distance of another radio. Note: The J symbol appears on the display when Talkaround Mode is selected. 19 English 02_GetStarted.fm Page 20 Friday, July 11, 2003 11:03 AM HOME REVERT MEMORY CHANNEL (1 & 2) The Home Revert Memory Channel feature allows you to instantly access up to two of your favorite channels at the touch of a button. GETTING STARTED To Activate Home Revert Memory Channel Press the preprogrammed Home Revert Memory Channel 1 button or Home Revert Memory Channel 2 button (see page 13). STORE MEMORY CHANNEL (1 & 2) The Store Memory Channel (1 & 2) feature allows you to store a channel for the Home Revert Memory Channel feature. G or H to select the desired channel. Press the preprogrammed Store Memory Channel 1 button or Store Memory Channel 2 button to store that channel (see page 13). 20 English SET LOCAL OR DISTANCE MODE Use this feature between Local mode (low sensitivity) and Distance mode (normal sensitivity). Local mode reduces interference from other radios in close proximity. Distance mode improves the radio’s range. Press the preprogrammed Local/Distance button (see page 13) to toggle between Local and Distance mode. 02_GetStarted.fm Page 21 Friday, July 11, 2003 11:03 AM VOX OPERATION PROGRAM PL/DPL CODES When hands-free operation is desired, your radio can transmit by voice alone using the VOX feature when you speak through a voice activated external microphone that is connected to your radio. Use this feature to edit the Private-Line/Digital Private-Line codes for a selected channel. To enable or disable VOX operation on a channel, press the preprogrammed VOX button (see page 14). D to enter menu mode. G or H until EDIT PL D to select EDIT PL G or H until RX XXX.X – or – until TX XXX.X D to select the current setting. G or H to scroll through the standard TPL Note: Pressing the PTT button disables VOX. – or – frequencies or DPL codes. You can select channels to enable or disable VOX as preprogrammed by your dealer/ programmer. – or – Enter a non-standard or standard 4-digit TPL frequency or the 3-digit octal code (numbers 0-7 only) for DPL via the DTMF microphone keypad. G or H to select a channel that has been preprogrammed to enable VOX. Note: Pressing the PTT button disables VOX. G or H to select a channel that has not GETTING STARTED Note: A voice activated external microphone must be connected to your radio prior to power-up of the radio in order to activate the VOX feature. D to confirm selection. C until you exit menu mode. been preprogrammed to disable VOX. 21 English 02_GetStarted.fm Page 22 Friday, July 11, 2003 11:03 AM GETTING STARTED Notes: 22 English 03_RadioCall.fm Page 23 Friday, July 11, 2003 1:37 PM RADIO CALLS RECEIVE A SELECTIVE CALL F When you receive a Selective Call: SELECTIVE RADIO INHIBIT • Your radio is equipped with a security feature that can temporarily render the unit inoperative when an inhibit signal is sent from the base station. The display shows F and the preprogrammed name or ID of the calling radio. • The yellow LED indicator flashes, if programmed by your dealer/programmer. • You hear two high-pitched tones. This feature is commonly used to disable radios: • • • In case of theft When your vehicle is being serviced For system control reasons When your radio has been rendered inoperative by the base station, all controls will be inoperative except for the On/Off/Volume knob and the display shows INHIBIT. To acknowledge the call, press and release the PTT button. Press and hold the PTT button to talk; release to listen. SEND A SELECTIVE CALL Press the preprogrammed Radio Call button (see page 14), and proceed to step 4. – or – RADIO CALLS You can send a Selective Call to a particular radio or to a group of radios, as programmed by your dealer/programmer. D to enter menu mode 23 English 03_RadioCall.fm Page 24 Wednesday, August 6, 2003 2:21 PM G or H until RAD CALL D to select RAD CALL G or H until SEL CALL D to select SEL CALL G or H to locate the desired ID in the Radio Call List. - or - RADIO CALLS When using the enhanced keypad microphone, enter a valid DTMF digit to move to that location in the list. Press the PTT button to send the call. Press and hold the PTT button to talk; release to listen. When the call is completed, C until you exit menu mode. 24 English RECEIVE A CALL ALERT™ PAGE F When you receive a Call Alert page: • The display shows F and the preprogrammed name or ID of the calling radio. • The yellow LED indicator flashes, if programmed by your dealer/programmer. • You hear four high-pitched tones. To acknowledge the page, press and release the PTT button; to cancel the page, press any other key. SEND A CALL ALERT PAGE You can alert another person by sending a Call Alert page. Press the preprogrammed Radio Call button (see page 14) and proceed to step 4. – or – D to enter menu mode G or H until RAD CALL D to select RAD CALL 03_RadioCall.fm Page 25 Wednesday, August 6, 2003 2:21 PM G or H until CALL ALT D to select CALL ALT G or H to locate the desired ID in the Radio Call List. - or When using the enhanced keypad microphone, enter a valid DTMF digit to move to that location in the list. Press the PTT button to send the page. When the page is completed, C until you exit menu mode. REPEATER ACCESS Use with Enhanced Keypad Microphone (RMN5029) Use this feature to send DTMF tones to a repeater. Enter your access code using the DTMF microphone keypad and press and hold the PTT button. Press and release the required DTMF buttons. Release the microphone’s PTT button. RADIO CALLS 25 English 03_RadioCall.fm Page 26 Friday, July 11, 2003 1:37 PM EMERGENCY ALERTS E SEND AN EMERGENCY ALERT E Your radio offers choices for initiating and responding to Emergency Alert communications. An Emergency Alert can be programmed to: A priority Emergency Alert can be sent to a specific radio or dispatch center by pressing either a foot switch or a push button accessory. Show E and sound a tone –or– • Show the normal display –or– • Activate the microphone so that all activity can be transmitted (for a predetermined amount of time). See your dealer/ programmer for more information. RADIO CALLS • Note: All choices listed are preprogrammable. See your dealer/programmer for more details. • The E symbol appears on the display when your radio is in the Emergency Alert state. All emergency features are preprogrammed. See your dealer/programmer for further information on the emergency features that are available. 26 English • The display shows: EMER IN Note: Emergency alerts have priority over all other calls. CLEAR AN EMERGENCY ALERT An Emergency Alert can be cleared by long pressing either a foot switch or a push button accessory. 04_Scan.fm Page 27 Friday, July 11, 2003 11:31 AM SCAN • The green LED indicator blinks during scan mode; it stops blinking when the radio switches to an active channel. • The Gsymbol appears on the display while in scan mode. • Your dealer/programmer can preprogram your radio where if the microphone is taken off-hook while in Scan mode, the scanning activity becomes suspended until the microphone is replaced. There are two types of Scan available in your radio: • System Scan • Auto Scan The Talkback feature allows you to respond to a transmission while scanning. If transmission is detected on a channel while scanning, the radio will stop and land on that channel for a preprogrammed period of time after activity has ceased. This is referred to as “hangtime”. During this hangtime you may respond by pressing the PTT button. SCAN Your radio is equipped with the Scan feature, which allows you to search for, lock onto, and monitor voice activity on channels. Scan lists are assigned per channel, by your dealer/ programmer. Your radio automatically switches to a channel, within that scan list, when it detects activity. You can also edit these lists through your radio’s menu (see page 29). TALKBACK Note: The LED scan indicator stops blinking while the radio is in hangtime. If the PTT button is not pressed after the preprogrammed hangtime, the radio reverts back to scan. START SYSTEM SCAN G Press the preprogrammed Scan button to start System Scan (see page 14). – or – G or H to select a channel that contains a Scan list. D to enter menu mode. G or H until SYS SCAN 27 English 04_Scan.fm Page 28 Thursday, July 24, 2003 4:18 PM D to select SYS SCAN SCAN The display shows the current scan status. G or H until D to select the current setting. SCAN ON STOP SYSTEM SCAN Press the preprogrammed Scan button to stop System Scan (see page 14). – or – D to enter menu mode. G or H until SYS SCAN D to select SYS SCAN G or H until D to select the current setting. 28 English START AUTO SCAN G Auto Scan automatically starts scanning once a channel with Auto Scan enabled is selected. G or H to select a channel that has been preprogrammed for Auto Scan by your dealer/ programmer. STOP AUTO SCAN The display shows the current scan status. • Note: Your dealer/programmer can preprogram your radio when exiting System Scan to automatically revert to the last scan channel that had activity on it or to automatically revert to the channel where scan was initiated. SCAN OFF The Gsymbol disappears from the display. G or H to select a channel that has not been preprogrammed for Auto Scan by your dealer/ programmer. • The Gsymbol disappears from the display. 04_Scan.fm Page 29 Friday, July 11, 2003 11:31 AM DELETE A NUISANCE CHANNEL If a channel continually generates unwanted calls or noise (a “nuisance” channel), you can temporarily remove it from the scan list: While the radio is on the Nuisance Channel, press the preprogrammed Nuisance Channel Delete button until you hear a tone. Release the Nuisance Channel Delete button. The nuisance channel is deleted. Note: You cannot temporarily delete the channel that has been preprogrammed by your dealer/programmer as your designated scan channel, a priority channel, or the last remaining channel in the scan list. Restore Channels to the Scan List Power off the radio. Once the radio is powered on again, the deleted nuisance channels are restored to the scan list. –or– Press the preprogrammed Scan button to stop the scan. Press the preprogrammed Scan button again to start scanning again. The Deleted Nuisance Channels are restored to the scan list. SCAN Note: Your dealer/programmer must preprogram a button to Nuisance Delete to access this feature. – or – G or H to select a channel that has not been preprogrammed by your dealer/ programmer to stop Scan. Once you return to the original channel, the deleted nuisance channels are restored to the scan list. EDIT A SCAN LIST Your radio can support up to 16 Scan lists. Each Scan list can contain up to 16 channels. The same channel can be included in several Scan lists, and the same Scan list can be assigned to several channels. Scan lists are assigned per channel, by your dealer/ programmer. When you edit a Scan list, you can either add, delete, or prioritize channels. 29 English 04_Scan.fm Page 30 Friday, July 11, 2003 11:31 AM SCAN Note: Your radio cannot receive any calls while you are editing a Scan list. ADD OR DELETE CHANNELS IN A SCAN LIST 10 11 If you added a channel, you see: – or – G or H to select a channel that contains a Scan list you want to edit. D to enter menu mode. G or H until PROG LST D to select PROG LST G or H until SCAN LST D to select SCAN LST G or H until ADD ITEM – or – until DELETE D to select the current setting. G or H until you see the channel you want to add or delete. 30 English ADDED If you delete a channel, you see: 12 13 Note: One Scan list per channel is available. D to confirm your selection. 14 DELETE D to confirm the deletion. you see: DELETED C to return to ADD ITEM – or – DELETE C until you exit menu mode. 04_Scan.fm Page 31 Friday, July 11, 2003 11:31 AM PRIORITIZE A CHANNEL IN A SCAN LIST Priority Channel None specified Scanning Sequence Ch1➠Ch2➠Ch3➠ Ch4➠…Ch1 Channel 2 (Priority 1) Ch2➠Ch1➠Ch2➠Ch3➠ Ch2➠Ch4➠Ch2➠…Ch1 Channel 2 (Priority 1) and Channel 8 (Priority 2) Ch2➠Ch1➠Ch8➠Ch3➠ Ch2➠Ch4➠Ch8➠…Ch1 Note: If you are receiving on a non-priority channel and traffic becomes active on a priority channel, your radio will automatically switch to that priority channel and indicate the activity with a short tone. Note: You cannot have the same priority on two different channels. D to enter menu mode. G or H until PROG LST D to select PROG LST G or H until SCAN LST D to select SCAN LST G or H until EDIT PRI D to select EDIT PRI G or H until PRI #1 – or – until PRI #2 SCAN You may want to check the activity on one or two channels more frequently than others. You can do this by prioritizing them: Set Priority Channels D to select the desired priority level. You see the current priority channel. 10 G or H until you see the channel you want to prioritize. 31 English 04_Scan.fm Page 32 Friday, July 11, 2003 11:31 AM SCAN 11 you see: SAVED 12 C to return to EDIT PRI 13 C until you exit menu mode. 32 English D to prioritize that channel. 05_Phone.fm Page 33 Friday, July 11, 2003 11:32 AM PHONE Your radio allows you to place and receive telephone calls through a repeater (depending on phone line availability). You can edit the phone list through your radio’s menu (see page 36). • D appears on the display when you are in Phone mode. Immediate Auto – your radio will transmit the access/deaccess code automatically upon entering phone mode or disconnecting a phone call. You will hear a series of tones, and see your access/deaccess code on the display, indicating that an access/deaccess code is being sent automatically. Delayed Auto – your radio will transmit the access code upon a PTT button press. The deaccess code is sent automatically when you exit phone mode. RECEIVE A PHONE CALL D When a phone call is received, a ringing tone sounds, alerting you to answer the phone call. Press the preprogrammed Phone button (see page 14), and skip to step 6. – or – Press the PTT button, and if the Hot Keypad feature has been preprogrammed by your dealer/programmer, do the following: G or H to select a channel that has been programmed for telephone. D to enter menu mode. G or H until PHONE D to select PHONE Note: PHONE Your dealer/programmer can preprogram your radio in one of three ways to enter your access/ de-access code to the repeater. Manual - Enter your access/deaccess code using the DTMF microphone keypad and press the PTT button. The D appears on the display. 33 English 05_Phone.fm Page 34 Friday, July 11, 2003 11:32 AM PHONE 34 English Your dealer/programmer can preprogram your radio in one of three ways to enter your access code to the repeater. Immediate Auto – automatically sends the access code. Delayed Auto – your radio will transmit the access code upon a PTT button press. Manual - Enter your access code using the DTMF microphone keypad and press the PTT button. Hold the radio in a vertical position with the microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth. Press and hold the PTT button to talk. Release the PTT button when the other party wants to talk, both parties will need to speak in turn. To exit Phone Mode: Press the preprogrammed Phone button (see page 14). – or – Press and hold C to disconnect the call. Note: D disappears from the display. MAKE A PHONE CALL D Press the preprogrammed Phone button (see page 14), and skip to step 6. – or – Press the PTT button, and if the Hot Keypad feature has been preprogrammed by your dealer/programmer, do the following: To disconnect a phone call, do one of the following: G or H to select a channel that has been programmed for telephone. If your radio has Immediate Auto or Delayed Auto programmed, go to step 8. – or – D to enter menu mode. Enter the deaccess code using the DTMF microphone keypad and press the PTT button. G or H until PHONE D to select PHONE 05_Phone.fm Page 35 Friday, July 11, 2003 11:32 AM a. Press and release the preprogrammed Speed Dial button. Your dealer/programmer can preprogram your radio in one of three ways to enter your access code to the repeater. Immediate Auto – automatically sends the access code. Delayed Auto – your radio will transmit the access code upon a PTT button press. Manual - Enter your access code using the DTMF microphone keypad and press the PTT button. b. Note: G or H to select a number from the phone list. XXXXXXXX Note: – or – Only the first 8 digits are displayed. Press and release the PTT button, if required for your radio. Hold the radio in a vertical position with the microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth. Press and hold the PTT button to talk. Release the PTT button when the other party wants to talk, both parties will need to speak in turn. PHONE XXXXXXX To redial the last number dialed (if not using Speed Dial), press and release the PTT button immediately after the access code is sent. The radio sends the last number dialed. – or – If you entered your access code using the DTMF keypad, press G once to access the last number dialed; then press and release the PTT button. When you hear a dial tone: Enter the phone number using the DTMF microphone keypad. The number will scroll to the left, – or – Press the key (0 to 9) corresponding to the number you want to call. 35 English 05_Phone.fm Page 36 Friday, July 11, 2003 11:32 AM To disconnect a phone call, do one of the following: D to enter menu mode. G or H until PROG LST D to select PROG LST G or H until PHN LST D to select PHN LST Press the preprogrammed Phone button (see page 14). G or H until ADD ITEM – or – D to select, ADD ITEM you see: NAME If your radio has Immediate Auto or Delayed Auto programmed, go to step 10. – or – Enter the deaccess code using the DTMF microphone keypad and press the PTT button. 10 To exit Phone Mode: PHONE Add an Entry Press and hold C to disconnect the call. Note: D disappears from the display. Use the DTMF microphone keypad to enter the name (see Entering Characters Using the DTMF Microphone Keypad on page 10). D to store the name, EDIT THE PHONE LIST Your radio contains a Phone list that holds up to 25 phone numbers. You can edit the Phone list in three ways through your radio’s menu: • Add an entry • Delete an entry • Edit an existing entry 36 English you see: NUMBER 05_Phone.fm Page 37 Friday, July 11, 2003 11:32 AM 10 Use the DTMF microphone keypad to enter the phone number. You can also add a Pause Indicator (press # three times until the # character on the display changes to a “-”). 11 D to store the phone number. you see: 12 LOC XX G or H until you see the location in the list G or H until PHN LST D to select PHN LST G or H until DELETE D to select DELETE G or H until you see the entry you want to delete. where you want to store the phone number. 14 D to store the location. you see: SAVED C to return to ADD ITEM you see: 10 – or – C until you exit menu mode. D to select the entry, 11 PHONE 13 DELETE D again to confirm the deletion, you see: DELETED C to return to – or – DELETE C until you exit menu mode. Delete an Entry D to enter menu mode. G or H until PROG LST D to select PROG LST 37 English 05_Phone.fm Page 38 Friday, July 11, 2003 11:32 AM PHONE Edit an Entry 11 D to enter menu mode. G or H until PROG LST D to select PROG LST G or H until PHN LST D to select PHN LST G or H until EDIT D to select EDIT G or H until you see the entry you want to edit. D to select the entry. 10 G or H until NAME (to edit the name), 38 English – or – until (to edit the phone number), NUMBER – or – until (to edit the location in the phone list). LOC D to confirm your selection. 12 Use the DTMF microphone keypad to edit the entry (see Entering Characters Using the DTMF Microphone Keypad on page 10), – or – G or H until you see the location where you want to store the phone number. 13 14 D to store the information. you see: SAVED C to return to EDIT – or – C until you exit menu mode. Edit Access/Deaccess Codes You can edit the access/de-access codes that are used to connect or disconnect you from a repeater. D to enter menu mode. G or H until PROG LST 05_Phone.fm Page 39 Friday, July 11, 2003 11:32 AM D to select PROG LST G or H until PHN LST D to select PHN LST G or H until EDT CODE D to select EDT CODE G or H until ACCESS – or – until DEACCESS PHONE D to select the current setting. 10 Enter the number using the DTMF keypad microphone. 11 D to select the entry. you see: SAVED 12 G or H to edit another code. 13 C until you exit menu mode. 39 English 05_Phone.fm Page 40 Friday, July 11, 2003 11:32 AM PHONE Notes: 40 English 06_Tone.fm Page 41 Friday, July 11, 2003 11:05 AM TONE PREFERENCES You can use the radio’s menu to access useradjustable settings to customize the tones on your radio by: D to enter menu mode. G or H until TONES D to select TONES G or H until you see the feature you want to change (see the table on page 42). D to select the feature. You see the feature’s current setting. G or H to see a list of available settings. D to select the desired setting. C until you exit the menu mode. TONE PREFERENCES 41 English 06_Tone.fm Page 42 Friday, July 11, 2003 11:05 AM Tone Settings Feature TONE Settings Turns all alert tones on or off. ON OFF Turns the keypad tones on or off. ON OFF TONE TAG Assigns a specific tone when receiving a specific type of radio call. STANDARD ALERT 1 – 6 ESCALERT Increases the volume of the alarm tones when a radio call is not answered. ON OFF TONE PREFERENCES KPD 42 English What it Does TONE 06_Tone.fm Page 43 Monday, July 14, 2003 10:21 AM TONES ON/OFF KEYPAD ON/OFF TONES You can program your radio to enable or disable all alert tones. You can program your radio to enable or disable all keypad tones. Note: Tones for the programmable buttons D to enter Menu mode. G or H until TONES D to select TONES D to enter Menu mode. G or H until TONE G or H until TONES D to select TONE D to select TONES G or H until ON G or H until KPD TONE – or – until OFF D to select KPD TONE G or H until ON – or – until OFF D to select the desired setting. disabled. TONE PREFERENCES C, D, E, and F can not be D to select the desired setting. 43 English 06_Tone.fm Page 44 Monday, July 14, 2003 10:21 AM CALL TONE TAGGING You can program your radio to sound a particular alert tone when receiving a Selective Call or Call Alert (call tone tagging). TONE PREFERENCES Note: TONE SET 10 C to return to TONE TAG 11 C until you exit the menu mode. ESCALERT D to enter menu mode. G or H until TONES D to select TONES G or H until TONE TAG D to select TONE TAG D to enter menu mode. G or H until CALL ALT G or H until TONES – or – until SEL D to select TONES You can program your radio to increase the volume of the alarm tones when a radio call is not answered. Press the preprogrammed Escalert button (see page 14) and proceed to step 5. CALL – or – D to select the desired setting. G or H until ESCALERT G or H until you see and hear the tone you D to select ESCALERT want to use for this type of call. 44 English Seven alert tones are available to select from in the list. you see: D to select the desired setting, 06_Tone.fm Page 45 Monday, July 14, 2003 10:21 AM G or H until ON – or – until OFF D to select the desired setting. TONE PREFERENCES 45 English 06_Tone.fm Page 46 Monday, July 14, 2003 10:21 AM TONE PREFERENCES Notes: 46 English 07_Utilities.fm Page 47 Friday, July 11, 2003 11:08 AM USER SETTINGS USER SETTINGS You can use the radio’s menu to access useradjustable settings to customize some of your radio features by: D to enter menu mode. G or H until UTILITY D to select UTILITY G or H until you see the feature you want to change (see the table on page 48). D to select the feature. You see the feature’s current setting. G or H for available settings. D to select the desired setting. 47 English 07_Utilities.fm Page 48 Friday, July 11, 2003 11:08 AM USER SETTINGS Utilities Features Feature Settings SQUELCH Changes the squelch of the radio to tight or normal. TIGHT NORMAL PWR LVL Changes the power level of the radio to high or low. HIGH LOW OPT BRD Enables or disables an option board. ON OFF BKLT Changes the brightness of the backlight. HIGH MED LOW Displays the radio’s software version number. XX’XX’XX INT SOFTWARE 48 English What it Does 07_Utilities.fm Page 49 Friday, July 11, 2003 11:08 AM SET SQUELCH LEVEL Press the preprogrammed Squelch button (see page 14) to toggle between tight and normal squelch. – or – D to select the current setting. SET POWER LEVEL B Each channel in your radio has a predefined transmit power level that can be changed. • High power (S) allows you to reach a radio that is farther away. Low power (R) to reach a radio within close proximity. • USER SETTINGS Use this feature to filter out nuisance (unwanted) calls and/or background noise. However, tightening squelch could cause calls from remote locations to be filtered out as well. In this case, normal squelch may be more desirable. Note: The R or S symbol appears on the display when High/Low Power Level is selected. D to enter menu mode. G or H until UTILITY D to select UTILITY G or H until SQUELCH D to select SQUELCH D to enter menu mode. G or H until NORMAL G or H until UTILITY -or - until TIGHT D to select UTILITY To set the power level, press the preprogrammed Power Level button (see page 14) to toggle between low and high power. – or – 49 English USER SETTINGS 07_Utilities.fm Page 50 Friday, July 11, 2003 11:08 AM G or H until PWR LVL G or H until OPT BRD D to select PWR LVL D to select OPT BRD G or H until HIGH G or H until ON -or - until LOW -or- until OFF D to select the current setting. D to select the current setting. OPTION BOARD ON/OFF A SET THE BACKLIGHT INTENSITY Use this feature to enable or disable an option board. Use this feature to change the brightness of the backlight. The A symbol appears on the display when the option board feature is On. • Press the preprogrammed Option Board button (see page 14) to toggle the option board on or off. – or – D to enter menu mode. G or H until UTILITY D to select UTILITY 50 English D to enter menu mode. G or H until UTILITY D to select UTILITY G or H until BKLT INT D to select BKLT INT 07_Utilities.fm Page 51 Friday, July 11, 2003 11:08 AM G or H until HIGH -or- until MED -or- until LOW USER SETTINGS D to select the current setting. DISPLAY THE SOFTWARE VERSION Use this feature to view the current software version of your radio. D to enter menu mode. G or H until UTILITY D to select UTILITY G or H until SOFTWARE D to view the software version. C until you exit menu mode. 51 English 07_Utilities.fm Page 52 Friday, July 11, 2003 11:08 AM USER SETTINGS Notes: 52 English 08_Warranty.fm Page 53 Friday, July 11, 2003 11:12 AM WARRANTY LIMITED WARRANTY MOTOROLA COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG: CM300 Mobile Units Two (2) Years Product Accessories One (1) Year Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty. WARRANTY MOTOROLA INC. (“MOTOROLA”) warrants the MOTOROLA manufactured Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below: for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. 53 English 08_Warranty.fm Page 54 Friday, July 11, 2003 11:12 AM II. GENERAL PROVISIONS: WARRANTY This warranty sets forth the full extent of MOTOROLA'S responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLA’s option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. III. STATE LAW RIGHTS: SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL 54 English OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. IV. HOW TO GET WARRANTY SERVICE: You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call Motorola at 1-800-9272744 US/Canada. 08_Warranty.fm Page 55 Friday, July 11, 2003 11:12 AM V. WHAT THIS WARRANTY DOES NOT COVER: A) B) C) E) F) G) the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified. H) Freight costs to the repair depot. I) A Product which, due to illegal or unauthorized alteration of the software/ firmware in the Product, does not function in accordance with MOTOROLA’s published specifications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA. J) Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. K) Normal and customary wear and tear. WARRANTY D) Defects or damage resulting from use of the Product in other than its normal and customary manner. Defects or damage from misuse, accident, water, or neglect. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. Breakage or damage to antennas unless caused directly by defects in material workmanship. A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motorola's normal warranty inspection and testing of the Product to verify any warranty claim. Product which has had the serial number removed or made illegible. Rechargeable batteries if: 1) any of the seals on the battery enclosure of cells are broken or show evidence of tampering. 2) VI. PATENT AND SOFTWARE PROVISIONS: MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following: 55 English 08_Warranty.fm Page 56 Friday, July 11, 2003 11:12 AM WARRANTY A) that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim; B) that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and C) should the Product or parts become, or in MOTOROLA’s opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in 56 English connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights. VII. GOVERNING LAW: This Warranty is governed by the laws of the State of Illinois, USA. 09_Accessory.fm Page 57 Thursday, March 18, 2004 4:43 PM ACCESSORIES Motorola offers a number of accessories to enhance the productivity of your two-way radio. Many of the available accessories are listed below. ANTENNAS HAD4006 VHF 136-144 MHz, 1/4 Wave Roof Mount HAD4007 VHF 144-150.8 MHz, 1/4 Wave Roof Mount HAD4008 VHF 150.8-162 MHz, 1/4 Wave Roof Mount VHF 162-174 MHz, 1/4 Wave Roof Mount RAD4000 VHF 136-174 MHz, 3 dB Gain (no mount) HAD4014 VHF 140-174 MHz, 3.5 dB Gain Roof Mount HAE4002 UHF 403-430 MHz, 1/4 Wave Roof Mount HAE4003 UHF 450-470 MHz, 1/4 Wave Roof Mount RAE4004_MB UHF 445-470 MHz, 5 dB Gain Magnetic Mount TAE6053 UHF 430-450 MHz, 1/4 Wave Roof Mount ALARM AND ACCESSORIES RLN4856 Footswitch with Remote PTT RLN4857 Pushbutton with Remote PTT RLN4858 Gooseneck PTT RLN4836 External PTT with Emergency Footswitch HLN9328 External Alarm Relay (used in conjunction with GLN7282) GLN7282 Buzzer Kit (used in conjunction with HLN9328) AUDIO HMN3596 Standard Microphone HMN1035 Heavy Duty Microphone RMN5029 Enhanced Keypad Microphone HAE4004 UHF 470-512 MHz, 1/4 Wave Roof Mount RMN5018 HAE4010 UHF 406-420 MHz, 3.5 dB Gain Roof Mount Mag One Microphone (Low Cost) (6 months warranty only) RMN5019 UHF 450-470 MHz, 3.5 dB Gain Roof Mount Mag One Keypad Microphone (Low Cost) (6 months warranty only) AAREX4617 Telephone Style Handset Kit HAE4011 ACCESSORIES HAD4009 RAE4004_RB UHF 445-470 MHz, 5 dB Gain Roof Mount 57 English 09_Accessory.fm Page 58 Thursday, March 18, 2004 4:43 PM GMMN4065 Visor Microphone (Omni-Direction) AARMN4027 Visor Microphone - High Noise (Uni-Direction) RSN4001 HSN8145 HLN9073 HLN9414 External Speaker 13 W External Speaker 7.5 W Microphone Hang-up Clip (requires install) Microphone Hang-up Clip (Universal - no install required) CABLES HKN9327 Ignition Switch Cable HKN4137 Low Power Cable to Battery (1-25 W) ACCESSORIES RDN7364 Base Modem RDN7367 Mobile Display Terminal with GPS RDN7368 Mobile Display Terminal RDN7369 Stand Alone Modem with GPS RDN7370 Interface Cable, 3 ft RDN7376 Interface Cable, 15 ft RDN7372 Fixed Mount GPS Active Antenna RDN7373 Mobile Printer RDN7374 Programming Software for CES Equipment RDN7380 Mobile Programming Hardware RDN7375 Magnetic Mount GPS Antenna CONTROL STATION RDN7377 MAPS (US) Regional RDN7378 AVL Messaging Statue Software HPN4002 Desktop Power Supply 1-25 W RDN7371 Credit Card Reader HPN4001 Desktop Power Supply 25-60 W RDN7738 Serial Breakout Unit (multiple modems) HMN3000 Black Desk Microphone RDN7739 Flying Lead Cable, 3 ft. RLN5390 Desktop Tray with Speaker RDN7740 Flying Lead Cable, 15 ft. RLN5391 Desktop Tray without Speaker RLN5492 Low Power Control Station Kit (1-25 W) (includes power supply, desktop tray, and desk mic) RLN5493 High Power Control Station Kit (25-60 W) (includes power supply, desktop tray, and desk mic) HKN4191 58 English DATA - CES WIRELESS TECHNOLOGIES High Power Cable to Battery (25-60 W) 09_Accessory.fm Page 59 Thursday, March 18, 2004 4:43 PM MOUNTING GLN7324 Low Profile Mounting Bracket GLN7317 High Profile Mounting Bracket FTN6083 DIN Mount HLN8097 Removable Slide Mount with Mini-U Connector HLN9227 8 in. Gooseneck Trunnion RLN4779 Keylock Mounting Bracket PUBLIC ADDRESS RLN5288 Public Address Kit (includes switch box and cabling) HKN9324_R Speaker Cable for PA (15 ft) HSN1000 External Speaker, 6 W for public address PERIPHERALS Basic RICK (Repeater Interface Comm Kit) HLN3333 RICK (Repeater Interface Comm Kit) ACCESSORIES HLN3948 59 English 09_Accessory.fm Page 60 Thursday, March 18, 2004 4:43 PM ACCESSORIES Notes: 60 English 10_QR-Card.fm Page 61 Friday, July 11, 2003 11:34 AM Turn the Radio On or Off 1. Rotate the On/Off/Volume Control knob clockwise. You will hear the selftest pass tone and see the green LED indicator and display icons light momentarily. 2. Rotate the On/Off/Volume Control knob counterclockwise until you hear a click and both the display and the LED indicators turn off. Adjust the Volume CM300™ Quick Reference Card Record the functions for your radio’s programmable buttons in the table provided below. For further information, see page 12 of this User Guide. 1. Turn the On/Off/Volume Control knob clockwise to increase the volume, or counterclockwise to decrease the volume. Channel Selector Menu Scroll Buttons Select a Radio Channel On/Off/Volume Knob 1. G or H to select the desired channel. Red/Yellow/Green LED Indicators Speaker Display Receive 1. Turn radio on and adjust volume to the desired level. 2. Select desired channel. 3. Listen for voice activity. The red LED indicator flashes while your radio is receiving. PERS4 Transmit CM300 1. Hold the microphone vertically 1 to 2 inches (2.5 to 5 cm) from your mouth. Press the PTT button to talk. The red LED indicator lights steady while the call is being sent. 2. Release PTT button to listen. P1 Start or Stop System Scan 1. Press the preprogrammed Scan button to start scan. – OR – G or H to select a channel that contains a Scan list. From the Scan menu, select SCAN ON. The green LED indictor blinks during scan operation. 2. Press the preprogramed Scan button again to stop scan. – OR – from the Scan menu, select SCAN OFF. Start or Stop Auto Scan G or H to select a channel that has been preprogrammed for Auto Scan by your dealer/programmer. 2. G or H to select a channel that has not been preprogrammed for Auto Scan by your dealer/programmer. 1. Delete a Nuisance Channel During Scanning 1. While radio is on a nuisance channel, hold down preprogrammed Nuisance Delete button until you hear a tone. 2. Release Nuisance Delete button. Microphone Jack Button Menu Buttons (P1, P2) Function P2 P3 P4 Programmable Buttons (P1, P2, P3, P4)) Short Press Long Press Hold Down Page 10_QR-Card.fm Page 62 Friday, July 11, 2003 11:34 AM Audio Indicators for Programmable Buttons Restore Channels to the Scan List Power off the radio then turn it on. – OR – Press the preprogrammed Scan button to stop the scan. The Deleted Nuisance Channels are restored to the scan list. – OR – G or H to select a channel that has not been preprogrammed by your dealer/programmer to stop Scan. Once you return to the original channel, the deleted nuisance channels are restored to the scan list. Positive Indicator Tone Negative Indicator Tone Scan Start Stop Power Level High Low Send a Selective Call Squelch Tight Normal 1. From the Selective Call menu, select or enter desired radio ID number. 2. Press PTT button to send the call. 3. Press and hold the PTT button to speak; release to listen. Repeater/Talkaround Does not use repeater Uses repeater Receive a Selective Call 1. When a Selective Call is received, the radio displays F and the name or ID of the calling radio; the yellow LED flashes and two tones are heard. 2. Press PTT button to acknowledge the call. 3. Press and hold the PTT button to speak; release to listen. LED Indicators LED State/Color Indication Radio Call Red Transmitting Flashing Red Receiving Flashing Red Channel Busy Scan Flashing Green Scanning for activity Call Alert Programmable Buttons VOX Enabled Disabled Local Distance Sticky Monitor/Open Squelch – Enabled Home Revert Memory Channel (1&2) – Enabled Story Memory Channel (1&2) – Stored Menu Mode D – Accessed Radio Call – Enabled Scan List Edit – Enabled Speed Dial – Enabled Phone Mode – Enabled Local/Distance Flashing Yellow Indicates receiving a Call Alert Option Board Enabled Disabled Yellow Indicates sending a Call Alert Escalert Enabled Disabled Selective Call Flashing Yellow Indicates receiving a Selective Call Yellow Indicates sending a Selective Call Sticky Monitor/Open Squelch Yellow While monitoring menu_nav.fm Page 105 Thursday, July 24, 2003 4:25 PM Menu Navigation Chart (Refer to Menu Navigation guidelines— lower, left-hand corner of this page) Rptr/ Talkarnd (p. 19) Radio Call G H System Scan (p. 27) repeater mode/ talkarnd mode on/off Edit PL/ DPL Codes (p. 21) Program Lists Phone (p. 33) G H Rx/Tx Phone List (p. 36) add/delete/ edit/edit code entry Selective Call Call Alert Scan List (p. 29) select/enter ID select/enter ID add/delete entry Menu Navigation priority to enter menu mode D to select menu item C to return to previous menu level —or— Hold down C to exit menu mode G or H to scroll through sub-list D to select sub-menu item G H Alert Squelch on/off normal/ tight Keypad Power Level on/off high/low Tone Tag Backlight Intensity standard/alert #1 - #6 Escalert on/off G or H to scroll through the list Utility (p. 47) Tones (p. 41) high/med/low Option Board on/off Software Ver# 96C22-O_cvr.qxd 7/2/2003 11:04 AM Page 1 MOTOROLA, the Stylized M Logo, and Radius are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2003. All rights reserved. Printed in U.S.A. MOTOROLA, le logotype au M stylisé et Radius sont enregistrés auprès du Bureau des marques et brevets des États-Unis. Tous les autres noms de produits et de services sont la propriété de leurs titulaires respectifs. © Motorola, Inc. 2003. Tous droits réservés. Imprimé aux États-Unis. CM300™ Commercial Series *6881096C22* Two-Way Radio User Guide 6881096C22-O de la radio bidirectionnelle Manuel de l'utilisateur
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2003:07:02 16:04:21Z Modify Date : 2004:03:18 16:48:04-06:00 Page Count : 68 Creation Date : 2003:07:02 16:04:21Z Mod Date : 2004:03:18 16:48:04-06:00 Producer : Acrobat Distiller 5.0 (Windows) Author : ckc015 Metadata Date : 2004:03:18 16:48:04-06:00 Creator : ckc015 Title : 96C22-O_cvr.qxd Has XFA : No Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools