Motorola Solutions 99FT3081 CDM1550LS+ 220MHz Mobile Radio User Manual 6864110R13 O cvr

Motorola Solutions, Inc. CDM1550LS+ 220MHz Mobile Radio 6864110R13 O cvr

Ex 8 Users Manual

Download: Motorola Solutions 99FT3081 CDM1550LS+ 220MHz Mobile Radio User Manual 6864110R13 O cvr
Mirror Download [FCC.gov]Motorola Solutions 99FT3081 CDM1550LS+ 220MHz Mobile Radio User Manual 6864110R13 O cvr
Document ID244085
Application IDMrxsDo0vFw6Kdl9YW1U1cA==
Document DescriptionEx 8 Users Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize227.54kB (2844234 bits)
Date Submitted2002-05-20 00:00:00
Date Available2002-09-25 00:00:00
Creation Date2002-04-15 20:44:30
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2002-05-03 11:40:56
Document Title6864110R13-O_cvr.qxd
Document CreatorPScript5.dll Version 5.2
Document Author: ckc015

6864110R13-O_cvr.qxd
4/15/2002
3:46 PM
Page 1
Motorola, The Stylized M logo, Intelligence Everywhere, Professional Radio - As Dedicated As You Are, CDM Series,
CDM1550•LS+, and Call Alert are trademarks of Motorola, Inc.
LTR is a mark of E.F. Johnson Company.
PassPort is a registered trademark of Trident Datacomm Technologies, Inc.
© 2002 Motorola, Inc. All rights reserved. Printed in U.S.A.
*6864110R13-O*
6864110R13-O
CDM1550•LS+ User Guide
Professional Radio - As Dedicated As You Are™
6864110R13-OTOC.fm Page 1 Monday, April 15, 2002 5:18 PM
Computer Software Copyrights . . . . . . . . . 6
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
User Safety, Training, and
General Information . . . . . . . . . . . . . . . . . . 7
Compliance with RF Energy Exposure
Standards. . . . . . . . . . . . . . . . . . . . . . . . . . 7
Operational Instructions and Training
Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . 8
Transmit and Receive . . . . . . . . . . . . . . 8
Mobile Antennas . . . . . . . . . . . . . . . . . . 9
Approved Accessories . . . . . . . . . . . . . 9
Fixed Site Antennas . . . . . . . . . . . . . . . 9
Electromagnetic Interference/
Compatibility. . . . . . . . . . . . . . . . . . . . . . . 10
Facilities . . . . . . . . . . . . . . . . . . . . . . . 10
Vehicles . . . . . . . . . . . . . . . . . . . . . . . 10
Driver Safety . . . . . . . . . . . . . . . . . . . . 11
Operational Warnings . . . . . . . . . . . . . . . 11
For Vehicles With an Air Bag . . . . . . . 11
Potentially Explosive Atmospheres. . . 11
Blasting Caps and Areas . . . . . . . . . . 11
Introduction . . . . . . . . . . . . . . . . . . . . . . . 13
CONTENTS
CONTENTS
Trunked Radio Systems . . . . . . . . . . . . . . 13
PassPort® Trunked Systems . . . . . . . . 13
LTR® Trunked Systems . . . . . . . . . . . . 13
Conventional Radio Systems . . . . . . . . . . 14
CDM1550•LS+™ Radio Features . . . . . . . 14
Radio Wide Features . . . . . . . . . . . . . . 14
PassPort Zone Features . . . . . . . . . . . 14
LTR Zone Features . . . . . . . . . . . . . . . 15
Conventional Zone Features . . . . . . . . 15
Radio Overview . . . . . . . . . . . . . . . . . . . . 17
Parts of the Radio . . . . . . . . . . . . . . . . . . .17
CDM1550•LS+ Model. . . . . . . . . . . . . . 17
On/Off/Volume Control Knob . . . . . . . . 18
LED Indicators . . . . . . . . . . . . . . . . . . .18
Push-to-Talk (PTT) Button . . . . . . . . . . 19
Microphone. . . . . . . . . . . . . . . . . . . . . . 19
Menu/Select Button ). . . . . . . . . . . 19
Menu Exit/Button (. . . . . . . . . . . . .19
Menu Buttons . . . . . . . . . . . . . . . . . . . . 19
Display . . . . . . . . . . . . . . . . . . . . . . . . . 20
Microphone Jack . . . . . . . . . . . . . . . . . 21
Optional DTMF Microphone (RMN4026). . 21
DTMF Microphone Keypad . . . . . . . . . 22
English
CONTENTS
6864110R13-OTOC.fm Page 2 Monday, April 15, 2002 5:18 PM
Programmable Buttons . . . . . . . . . . . . . . . 24
Audio Indicators for Programmable
Buttons . . . . . . . . . . . . . . . . . . . . . . . . 28
Getting Started . . . . . . . . . . . . . . . . . . . . 29
Turning the Radio On or Off . . . . . . . . . . .
Adjusting the Volume . . . . . . . . . . . . . . . .
Selecting a Trunked Zone
and Talkgroup. . . . . . . . . . . . . . . . . . . . . .
Sending a Trunked Call . . . . . . . . . . . . . .
Selecting a Conventional Zone
and Channel . . . . . . . . . . . . . . . . . . . . . . .
Direct Zone Access. . . . . . . . . . . . . . . . . .
Direct Channel Access . . . . . . . . . . . . . . .
Sending a Conventional Call . . . . . . . . . .
Receiving a Trunked or Conventional
Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeater or Talkaround J Mode
(Conventional Operation Only) . . . . . . . . .
Call Light
(Trunked Operation Only) . . . . . . . . . . . . .
Home Channel . . . . . . . . . . . . . . . . . . . . .
Horn and Lights . . . . . . . . . . . . . . . . . . . .
To Activate Horn and Lights
Programmed with Call Light
(Trunked Operation Only) . . . . . . . . . .
English
29
29
30
30
31
31
31
33
33
34
35
35
35
35
To Activate Horn and Lights
Programmed with Call Alert
(LTR Trunked and Conventional
Operation Only). . . . . . . . . . . . . . . . . . 36
Remote Monitor
(LTR Trunked and Conventional
Operation Only) . . . . . . . . . . . . . . . . . . . . 36
Passport Trunking . . . . . . . . . . . . . . . . . 39
Seamless Roaming . . . . . . . . . . . . . . . . .
Initial Registration . . . . . . . . . . . . . . . .
Roaming and Registering Between
Sites . . . . . . . . . . . . . . . . . . . . . . . . . .
Site/Min View . . . . . . . . . . . . . . . . . . . . . .
Roam Request . . . . . . . . . . . . . . . . . . . . .
To Start a Roam Request . . . . . . . . .
To Cancel a Roam Request . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . .
39
39
40
41
42
42
43
43
Radio Calls . . . . . . . . . . . . . . . . . . . . . . . 45
Making a Selective Call
(LTR Trunked and Conventional
Operation Only) . . . . . . . . . . . . . . . . . . . . 45
Receiving a Selective Call F
(LTR Trunked and Conventional
Operation Only) . . . . . . . . . . . . . . . . . . . . 46
6864110R13-OTOC.fm Page 3 Monday, April 15, 2002 5:18 PM
Selective Radio Inhibit
(LTR Trunked and Conventional
Operation Only) . . . . . . . . . . . . . . . . . . . .
Editing a Radio Call List K
(LTR Trunked and Conventional
Operation Only) . . . . . . . . . . . . . . . . . . . .
Name and Call Tone Tagging
(LTR Trunked and Conventional
Operation Only) . . . . . . . . . . . . . . . . . . . .
To Tag a Specific User’s Name. . . . . .
To Tag a Type of Radio Call . . . . . . . .
55
CONTENTS
Sending a Call Alert Page
(LTR Trunked and Conventional
Operation Only). . . . . . . . . . . . . . . . . . . . . 46
Receiving a Call Alert Page
(LTR Trunked and Conventional
Operation Only). . . . . . . . . . . . . . . . . . . . . 47
Radio Check
(LTR Trunked and Conventional
Operation Only). . . . . . . . . . . . . . . . . . . . . 48
Sending a Status
(Conventional Operation Only) . . . . . . . . . 48
Sending a Message
(Conventional Operation Only) . . . . . . . . . 49
Receiving a Message
(Conventional Operation Only) . . . . . . . . . 50
Responding to Emergency Alerts E
(Conventional Operation Only) . . . . . . . . . 50
Decoding an Emergency Alarm . . . . . . 51
Multiple Queued Emergencies. . . . . . . 52
Three Minute Timer . . . . . . . . . . . . . . . 52
After the Timer Expires . . . . . . . . . . . . 52
Clearing an Emergency Alert E
(Conventional Operation Only) . . . . . . . . . 53
Sending an Emergency Remote Monitor
(Conventional Operation Only) . . . . . . . . . 53
Sending an Emergency Alert E
(Conventional Operation Only) . . . . . . . . . 54
Sending a Remote Monitor . . . . . . . . . . . . 54
55
56
56
57
Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Talkback . . . . . . . . . . . . . . . . . . . . . . . . . .
PassPort Primary Auto Group Scan
(PassPort Trunked Operation Only) . . . . .
PassPort Group Scan G
(PassPort Trunked Operation Only) . . . . .
Enabled . . . . . . . . . . . . . . . . . . . . . . . .
To Start or Stop PassPort Group
Scan Operation through a
Preprogrammed Button . . . . . . . . . . . .
To Start or stop PassPort Group
Scan Operation through the Menu . . .
Auto Group Scan
(LTR Trunked Operation Only) . . . . . . . . .
To Start Auto Group Scan . . . . . . . . . .
To Stop Auto Group Scan . . . . . . . . . .
59
60
60
60
61
61
61
61
62
English
CONTENTS
6864110R13-OTOC.fm Page 4 Monday, April 15, 2002 5:18 PM
All Group Scan
(LTR Trunked Operation Only) . . . . . . . . .
To Start or Stop All Group Scan
Operation through a Preprogrammed
Button . . . . . . . . . . . . . . . . . . . . . . . . .
To Start or Stop All Group Scan
Operation Through the Menu . . . . . . .
System Scan G
(LTR Trunked and Conventional
Operation Only) . . . . . . . . . . . . . . . . . . . .
When System Scan is Enabled . . . . . .
To Start or Stop a System Scan
Operation. . . . . . . . . . . . . . . . . . . . . . .
Deleting a Nuisance Channel/Talkgroup
(PassPort Group Scan or System Scan
Operation Only) . . . . . . . . . . . . . . . . . . . .
To Temporarily Delete the
Channel/Talkgroup . . . . . . . . . . . . . . .
Restoring a Channel/Talkgroup Back
to the Scan List . . . . . . . . . . . . . . . . . .
Editing a Scan List
(PassPort Group Scan or System Scan
Operation Only) . . . . . . . . . . . . . . . . . . . .
Adding or Deleting Talkgroups or
Channels in a Scan List . . . . . . . . . . . . . .
English
62
62
62
63
63
63
Prioritizing a Talkgroup or Channel
in a Scan List
(System Scan Operation Only) . . . . . . . . 66
Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Making a Phone Call D Through a
Trunked System . . . . . . . . . . . . . . . . . . . .
Making a Phone Call D Through a
Conventional System . . . . . . . . . . . . . . . .
Receiving a Phone Call D Through a
Trunked or Conventional System. . . . . . .
Modifying the Phone List K . . . . . . . . . .
To Add an Entry . . . . . . . . . . . . . . . . .
To Delete an Entry . . . . . . . . . . . . . . .
To Edit an Entry . . . . . . . . . . . . . . . . .
69
70
72
73
73
74
75
64
Voice Storage . . . . . . . . . . . . . . . . . . . . . 77
64
Incoming Call Recording . . . . . . . . . . . . .
Selective Incoming Call Recording . . .
To Selectively Record an Incoming
Call . . . . . . . . . . . . . . . . . . . . . . . . . . .
All Incoming Call Recording . . . . . . . .
To Record All Incoming Calls . . . . . . .
Voice Memo Recording . . . . . . . . . . . . . .
To Record a Voice Memo using the
Preprogrammed Record/Playback
Button . . . . . . . . . . . . . . . . . . . . . . . . .
64
64
65
78
78
78
78
79
80
80
6864110R13-OTOC.fm Page 5 Monday, April 15, 2002 5:18 PM
Audio/Tone Settings . . . . . . . . . . . . . . . . 87
Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Selecting the Display Language
(LTR Trunked and Conventional
Operation Only) . . . . . . . . . . . . . . . . . . . . 93
CONTENTS
To Record a Voice Memo using the
Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Recorded Message Playback . . . . . . . . . . 81
To Playback a Message using the Preprogrammed Record/Playback Button . . . 81
To Playback a Message using the
Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Recorded Message Delete . . . . . . . . . . . . 82
To Delete a Message using the
Preprogrammed Delete Playback
Button . . . . . . . . . . . . . . . . . . . . . . . . . 82
To Delete a Message using the
Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Recorded Message Transmission . . . . . . 83
Answer Mode . . . . . . . . . . . . . . . . . . . . . . 84
To Enable the Answer Mode Feature . 84
To Record a Message . . . . . . . . . . . . . 84
To Disable the Answer Mode Feature . 85
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . 95
Accessories . . . . . . . . . . . . . . . . . . . . . . 99
Microphones . . . . . . . . . . . . . . . . . . . . . . . 99
Handsfree Kits . . . . . . . . . . . . . . . . . . . . . 99
Exchangeable Button Kits . . . . . . . . . . . . 99
Mounting Kits . . . . . . . . . . . . . . . . . . . . . . 99
Remote Mounts . . . . . . . . . . . . . . . . . . . 100
External Speakers . . . . . . . . . . . . . . . . . 100
Installation and Alarm Kits . . . . . . . . . . . 100
Antennas . . . . . . . . . . . . . . . . . . . . . . . . 100
Service Aids and Programming
Equipment Manuals . . . . . . . . . . . . . . . . 100
Manuals . . . . . . . . . . . . . . . . . . . . . . . . . 101
Control Station Kits. . . . . . . . . . . . . . . . . 101
Mobile Data Units Section . . . . . . . . . . . 101
Public Address . . . . . . . . . . . . . . . . . . . . 103
Retrofit Kit. . . . . . . . . . . . . . . . . . . . . . . . 103
Setting the Power Level B . . . . . . . . . . . . 91
Setting the Clock/Alarm. . . . . . . . . . . . . . . 92
Displaying the Time. . . . . . . . . . . . . . . . . . 93
English
6864110R13-OTOC.fm Page 6 Monday, April 15, 2002 5:18 PM
CONTENTS
COMPUTER SOFTWARE
COPYRIGHTS
The Motorola products described in this
manual may include copyrighted Motorola
computer programs stored in semiconductor
memories or other media. Laws in the United
States and other countries preserve for
Motorola certain exclusive rights for
copyrighted computer programs, including, but
not limited to, the exclusive right to copy or
reproduce in any form the copyrighted
computer program. Accordingly, any
copyrighted Motorola computer programs
contained in the Motorola products described
in this manual may not be copied, reproduced,
modified, reverse-engineered, or distributed in
any manner without the express written
permission of Motorola. Furthermore, the
purchase of Motorola products shall not be
deemed to grant either directly or by
implication, estoppel, or otherwise, any license
under the copyrights, patents or patent
applications of Motorola, except for the normal
non-exclusive license to use that arises by
operation of law in the sale of a product.
English
01_Safety.fm Page 7 Friday, May 3, 2002 11:38 AM
SAFETY
USER SAFETY, TRAINING, AND
GENERAL INFORMATION
READ THIS IMPORTANT INFORMATION ON
SAFE AND EFFICIENT OPERATION
BEFORE INSTALLING AND USING YOUR
MOTOROLA MOBILE TWO-WAY RADIO IN A
VEHICLE OR AS A CONTROL STATION.
Your Motorola two-way radio is designed and
tested to comply with a number of national and
international standards and guidelines (listed
below) regarding human exposure to radio
frequency electromagnetic energy. This radio
complies with the IEEE (FCC) and ICNIRP
exposure limits at duty cycles of up to 50%
talk-50% listen and should be used for
occupational use only. In terms of measuring
RF energy for compliance with the FCC
exposure guidelines, your radio radiates
measurable RF energy only while it is
transmitting (during talking), not when it is
receiving (listening) or in standby mode.
•
United States Federal Communications
Commission, Code of Federal Regulations;
47CFR part 2 sub-part J
•
American National Standards Institute
(ANSI) / Institute of Electrical and Electronic
Engineers (IEEE) C95. 1- 1992
•
Institute of Electrical and Electronic
Engineers (IEEE) C95.1- 1999 Edition
•
International Commission on Non-Ionizing
Radiation Protection (ICNIRP) 1998
•
Ministry of Health (Canada) Safety Code 6.
Limits of Human Exposure to Radiofrequency
Electromagnetic Fields in the Frequency
Range from 3 kHz to 300 GHz, 1999
•
Australian Communications Authority
Radiocommunications (Electromagnetic
Radiation - Human Exposure) Standard
2001
•
ANATEL, Brasil Regulatory Authority,
Resolution 256 (April 11, 2001) “additional
requirements for SMR, cellular and PCS
product certification.”
SAFETY
COMPLIANCE WITH RF ENERGY
EXPOSURE STANDARDS
Your Motorola two-way radio complies with the
following RF energy exposure standards and
guidelines:
English
01_Safety.fm Page 8 Friday, May 3, 2002 11:38 AM
OPERATIONAL INSTRUCTIONS
AND TRAINING GUIDELINES
Table 1: Rated Power and Lateral Distance
Rated Power of
Minimum Lateral
Vehicle-installed
Distance from
Mobile Two-way Radio Transmitting Antenna
To ensure optimal performance and
compliance with the RF energy exposure
limits in the above standards and
guidelines, users should transmit no more
than 50% of the time and always adhere to
the following procedures:
Less than 7 watts
8 inches
(20 centimeters)
7 to 15 watts
1 foot
(30 centimeters)
16 to 50 watts
2 feet
(60 centimeters)
51 to 110 watts
3 feet
(90 centimeters)
SAFETY
Transmit and Receive
•
•
To transmit (talk), push the Push-To-Talk
(PTT) button; to receive, release the PTT
button.
Transmit only when people outside the
vehicle are at least the minimum lateral
distance away, as shown in Table 1, from
a properly installed, externally-mounted
antenna.
Table 1 lists the minimum lateral distance
for bystanders in an uncontrolled
environment from the transmitting antenna
at several different ranges of rated radio
power for mobile radios installed in a
vehicle.
English
Mobile Antennas
•
Install antennas at the center of the roof
or the center of the trunk deck. These
mobile antenna installation guidelines
are limited to metal body vehicles.
•
The antenna installation must additionally be in accordance with:
a. The requirements of the antenna manufacturer/supplier
b. Instructions in the Radio Installation
Manual
01_Safety.fm Page 9 Friday, May 3, 2002 11:38 AM
•
Use only Motorola approved supplied
antenna or Motorola approved replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the radio and may violate FCC regulations.
Approved Accessories
For a list of Motorola approved antennas see
the Accessory section of this user manual.
Fixed Site Antennas
•
The antenna should be mounted outside
the building on the roof or a tower if at all
possible.
•
As with all fixed site antenna installations, it
is the responsibility of the licensee to manage the site in accordance with applicable
ELECTROMAGNETIC
INTERFERENCE/COMPATIBILITY
NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded,
designed or otherwise configured for
electromagnetic compatibility. It may be
necessary to conduct compatibility
testing to determine if any electronic
equipment used in or around vehicles
or near fixed antenna sites is sensitive
to external RF energy and if any procedures need to be followed to eliminate
or mitigate the potential for interaction
between the radio transmitter and the
equipment or device.
SAFETY
If mobile radio equipment is installed at a fixed
location and operated as a control station or as
a fixed unit, the antenna installation must
comply with the following requirements in order
to ensure optimal performance and compliance
with the RF energy exposure limits in the
above standards and guidelines.
regulatory requirements and may require
additional compliance actions such as site
survey measurements, signage, and site
access restrictions in order to insure that
exposure limits are not exceeded.
English
01_Safety.fm Page 10 Friday, May 3, 2002 11:38 AM
Facilities
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your radio in
any facility where posted notices instruct
you to do so. Hospitals or health care facilities
may be using equipment that is sensitive to
external RF energy.
SAFETY
Vehicles
To avoid possible interaction between the radio
transmitter and any vehicle electronic control
modules, for example, ABS, engine, or
transmission controls, we recommend that the
radio be installed by an experienced installer
and that the following precautions be used
when installing the radio:
1. Refer to any manufacturers instructions
or other technical bulletins or
recommendations on radio installation.
2. Before installing the radio, determine
the location of the electronic control
modules and their harnesses in the
vehicle.
10
English
3. Route all radio wiring, including the
antenna transmission line, as far away
as possible from the electronic control
units and associated wiring.
Driver Safety
Check the laws and regulations on the use of
radios in the area where you drive. Always
obey them.
When using your radio while driving, please:
• Give full attention to driving and to the
road.
• Pull off the road and park before making
or answering a call if driving conditions
so require.
OPERATIONAL WARNINGS
WARNING
For Vehicles With an Air Bag
Do not place a mobile radio in the area over an
air bag or in the air bag deployment area. Air
bags inflate with great force. If a radio is placed
01_Safety.fm Page 11 Friday, May 3, 2002 11:38 AM
in the air bag deployment area and the air bag
inflates, the radio may be propelled with great
force and cause serious injury to occupants of
the vehicle.
Potentially Explosive Atmospheres
Turn off your radio prior to entering any area
with a potentially explosive atmosphere.
Sparks in a potentially explosive atmosphere
can cause an explosion or fire resulting in
bodily injury or even death.
or in areas posted: “Turn off two-way radio.”
Obey all signs and instructions.
For radios installed in vehicles fuelled by
liquefied petroleum gas, refer to the (U.S.)
National Fire Protection Association standard,
NFPA 58, for storage, handling, and/ or
container information. For a copy of the LPgas standard, NFPA 58, contact the National
Fire Protection Association, One Battery Park,
Quincy, MA.
SAFETY
The areas with potentially explosive
atmospheres referred to above include fueling
areas such as below decks on boats, fuel or
chemical transfer or storage facilities, areas
where the air contains chemicals or particles,
such as grain, dust or metal powders, and any
other area where you would normally be
advised to turn off your vehicle engine. Areas
with potentially explosive atmospheres are
often but not always posted.
Blasting Caps and Areas
To avoid possible interference with blasting
operations, turn off your radio when you are
near electrical blasting caps, in a blasting area,
11
English
SAFETY
01_Safety.fm Page 12 Friday, May 3, 2002 11:38 AM
12
English
INTRODUCTION
Welcome to Motorola’s
CDM Series family of
radio users. The
CDM1550•LS+™, the
Intelligent Radio,
combines the very latest
in two-way technology
while delivering
outstanding functionality at the touch of a
button.
The CDM1550•LS+ mobile radio operates on
PassPort and LTR trunked and conventional
radio systems.
TRUNKED RADIO SYSTEMS
PassPort is an enhanced trunking protocol
developed by Trident Micro Systems that
supports wide area dispatch networking. A
network is formed by linking several trunked
sites together to form a single system. This
offers users an extended communication
coverage area. Additionally, users with
PassPort can seamlessly roam among all sites
within the network. Seamless roaming means
that the radio user does not have to manually
change the zones on the radio when roaming
from site-to-site.
LTR® Trunked Systems
LTR is a transmission based trunking protocol
developed by the E. F. Johnson Company for
primarily single site trunking applications. In
transmission trunking, a repeater is used for
only the duration of a single transmission.
Once a transmission is completed, that
repeater becomes available to other users.
This means that a conversation comprised of
many transmissions may occur over several
different channels within the LTR system. This
method of trunking provides system efficiency
INTRODUCTION
Trunked systems allow a large number of users
to share a relatively small number of
frequencies or repeaters without interfering
with each other. The airtime of all the repeaters
in a trunked system is pooled, which
maximizes the amount of airtime available to
any one radio and minimizes channel
congestion.
PassPort® Trunked Systems
13
English
by making repeaters available to all users after
every transmission.
CONVENTIONAL RADIO SYSTEMS
Conventional radio systems typically refers to
unit-to-unit communications through a single
channel. Conventional systems also allow
radio users to extend communication coverage
by relaying their messages through a repeater.
To ensure coordinated use by multiple
talkgroups, each radio user must monitor the
channel or repeater before transmitting to
verify that the system is not currently busy.
CDM1550•LS+ RADIO FEATURES
INTRODUCTION
Note:
Radio Wide Features
•
•
•
•
•
•
•
•
•
14-Character Alphanumeric Display
4 Programmable Feature Buttons
Up to 15 PassPort and/or LTR Zones with
up to 16 Talkgroups per Zone
Up to 16 Conventional Channels
X-Pand Audio Enhancement Selectable by
Conventional Channel, LTR Repeater or
PassPort Talkgroup
Home Channel
Telephone Interconnect
User-programmable Phone and Scan Lists
Voice Storage Capability
PassPort Zone Features
•
•
•
•
•
•
•
14
English
Throughout this manual there are
features listed as trunked and conventional. Trunked indicates the feature functions in both PassPort and
LTR zones unless otherwise noted.
Conventional indicates the feature
functions in Conventional zones
only.
CDM1550•LS+ Radio Feature Highlights:
Unique Mobile Identity Number per Radio
Unique Electronic Serial Number per
Radio
Registration/Deregistration upon power up/
power down
Automatic Seamless Roaming between
Networked Sites
Registered Site and Mobile Identity View
User Initiated Roam Request
PassPort Primary Group Auto Scan and
PassPort Scan
PassPort Zone Features (Cont.)
• Call Signalling Features
- PTT ID (Display of Mobile
Identification Number)
LTR Zone Features
•
MDC 1200 Signaling
- Call Alert
- Selective Call
•
•
- Radio Check
- Caller ID
Auto Group System, All Group Scan
System Scan with 2 Priority Levels
Conventional Zone Features
•
•
Monitor and Sticky Permanent Monitor
System Scan with 2 Priority Levels
INTRODUCTION
15
English
INTRODUCTION
Notes
16
English
03_Radio Overview.fm Page 17 Monday, April 15, 2002 5:26 PM
RADIO OVERVIEW
RADIO OVERVIEW
PARTS OF THE RADIO
HT1250•LS+ Model
Zone Selector Knob
Top Button (D)
(programmable)
On/Off/Volume Knob
Side Button 1 (A)
(programmable)
LED Indicator
Microphone
Display
Push-to-Talk (PTT)
Button
Side Button 2 (B)
(programmable)
Side Button 3 (C)
(programmable)
Menu Keys
(P1, P2, P3)
(programmable)
Keypad
Side
Connector
Cover
17
English
03_Radio Overview.fm Page 18 Monday, April 15, 2002 5:26 PM
RADIO OVERVIEW
On/Off/Volume Knob
LED Color
Turns the radio on or off, and adjusts the
radio’s volume.
Single flashing Group Selective call received
yellow
(trunked operation only)
Zone Selector Knob
Momentary
green
Radio has powered-up
successfully
Double
flashing green
System or All Group Scan
operation, PassPort Group Scan
Switches the radio to different trunked and
conventional zones. It is also used to scroll
through menu choices when in Menu Mode.
LED Indicator
Push-to-Talk (PTT) Button
Indicates battery status (see page 30); or the
status of power-up, scan, or receipt of a
talkgroup or selective call (see table below):
Press and hold down this button to talk;
release it to listen.
LED Color
Indicates
Steady red
Radio is transmitting (PTT button
pressed)
Flashing red
Radio is attempting to access
trunked system (PTT button
pressed), or
Radio is receiving (PTT button
released)
Double
flashing yellow
18
English
Indicates
Call Light feature, or
Individual Selective Call
Received (trunked operation only)
Microphone
When sending a message, hold the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth, and speak clearly into the
microphone.
Menu Keys
Exit
Up
Menu/Select
Left
Down
Right
03_Radio Overview.fm Page 19 Monday, April 15, 2002 5:26 PM
Left Key <
Used to enter menu mode. When in menu mode,
this key is also used to make menu selections.
Used as a backspace key when editing radio
call, scan, and phone lists. This key can also
be programmed with a radio feature (see
page 22).
Exit Key (
Used to move to the previous menu level (short
press) or to exit menu mode (long press).
Keypad Keys
Up Key + and Down Key ?
•
Used to scroll through the preprogrammed
talkgroups of a selected trunked zone, or
through conventional channels when in
conventional zone.
•
Used for scrolling when in menu mode.
•
The ? key can also be programmed with
a radio feature (see page 22).
Right Key >
Moves the cursor right or inserts a space when
editing call, scan, and phone lists. This key can
also be programmed with a radio feature (see
page 22).
RADIO OVERVIEW
Menu/Select Key )
These keys are used for:
•
Dialing a phone number
•
Entering a specific radio ID number when
making a selective call or call alert
•
Entering information when programming
radio call, scan, and phone lists
Each key can generate several different
characters. For example, to enter the character
“C,” press the 2 key three times. (Refer to the
following table.)
19
English
03_Radio Overview.fm Page 20 Monday, April 15, 2002 5:26 PM
RADIO OVERVIEW
Entering Characters Using the Keypad
Number of Times Key is Pressed
20
English
Key
10
11
12
13
Á
Ç
à
á
ç
È
É
Ê
è
é
ê
Í
ì
í
Ñ
Ó
Ô
ò
ó
ô
Ú
ù
ú
Y´
Blank
Space
’
”
y´
14
15
ö
03_Radio Overview.fm Page 21 Monday, April 15, 2002 5:26 PM
Display
Call Received
The top two screen rows display menu and
radio status information:
Symbol
X-Pand
Power Level
Monitor
Emergency
Call Received
Indication
The X-Pand feature is
activated. When in narrow
band, this feature improves
audio quality.
Scan
Indication
An Emergency Siren is being
sounded. (Trunked mode only.)
An Emergency Alarm is being
send (Conventional mode
only).
A Selective Call or Call Alert
has been received (LTR
trunked and Conventional
operation only).
When the green LED is
blinking, indicates that the
System, PassPort Scan, or All
Group Scan feature has been
activated.
Low Power “ R ” or High
Power “ S ” is activated.
When the green LED is off,
indicates that non-prioritized
Auto Group Scan has been
activated.
The selected channel is being
monitored (conventional
operation only).
Indicates activity on a priority
1 talkgroup or channel during
System Scan.
Phone mode is selected.
•Priority 1 Scan
flashing)
RADIO OVERVIEW
Symbol
•
Phone
21
English
RADIO OVERVIEW
03_Radio Overview.fm Page 22 Monday, April 15, 2002 5:26 PM
Symbol
Priority 2 Scan
steady)
•
Talkaround
Indication
Symbol
• When the green LED is on,
indicates activity on a
priority 2 talkgroup or
channel during System
Scan.
You are not transmitting
through a repeater
(Conventional operation
only).
A Program list is being edited.
Battery Level
22
English
Signal Strength
PassPort Zone
Shows the time (12- or
24-hour).
The more bars, the stronger
the signal being received by
your radio.
A PassPort zone has been
selected.
Programmable Buttons
Several of your radio’s buttons can be
programmed by your dealer as shortcuts to
many of the radio’s features.
Programmable buttons include:
•
The Three Side Buttons (A, B, C) and the
Top Button (D)
•
The Three Lower Menu Keys (P1, P2, P3)
(when the radio is not in menu mode)
Keypad is locked.
Keypad Lock
• When the green LED is off,
indicates prioritized Auto
Group Scan has been
activated.
Programming
Mode
Clock
Indication
The number of bars (0–4)
shown indicates the charge
remaining in your battery.
Each button can access up to two features,
depending on the type of button press:
03_Radio Overview.fm Page 23 Monday, April 15, 2002 5:26 PM
•
or
•
Long Press—pressing and holding the
programmable buttons for a period of time
(programmable for 1/2 to 1 1/2 seconds),
or
•
Hold Down—pressing and holding down
the programmable buttons while checking
status or making adjustments.
The table on page 24 summarizes the
programmable features available and shows
the page number where the feature is
explained.
In the “Button” column, have your dealer write
down the programmable buttons next to the
features that have been programmed to them.
Use the abbreviations (for example, A for Side
Button 1, D for Top Button, etc.) shown in the
radio illustration at the front of this manual.
RADIO OVERVIEW
Short Press—quickly pressing and
releasing the programmable buttons,
Also, where a choice exists, have your dealer
indicate whether the button press is short
press (SP) or long press (LP).
Check with your dealer for a complete list of
features your radio supports.
23
English
RADIO OVERVIEW
03_Radio Overview.fm Page 24 Monday, April 15, 2002 5:26 PM
Programmable Features
Feature
Indicator
Short Press
Long Press
Hold Down
Battery Gauge
LED
Color
—
—
Check the battery’s
charge status.
30
Cancel Emergency
Siren Trunked
mode only).
Cancel Emergency
Alarm (Conventional mode only).
—
39
50
—
39
—
—
—
—
Continually monitor
channel
—
—
66
Emergency
(Top button
only)
Initiate
Emergency Siren
(Trunked mode
only).
Initiate
Emergency Alarm
(Conventional
mode only).
Home Channel
Revert
—
Directly access your favorite trunked
zone and talkgroup or conventional channel.†
Keypad Lock
Light
—
Turn on your radio backlight.†
Monitor §
Exit permanent
monitor mode.
Phone
Directly access Phone mode.†
—
Enter permanent
monitor mode.
†
This feature is activated by EITHER a short OR a long press, but not both.
§
Conventional operation only.
24
English
Toggle keypad
between locked and
unlocked.
‡LTR
trunked operation only.
Page Button
*PassPort trunked operation only.
03_Radio Overview.fm Page 25 Monday, April 15, 2002 5:26 PM
Programmable Features (Cont.)
Indicator
Power Level
Radio Call ‡§
LED
Color
Repeater/
Talkaround §
Short Press
Hold Down
Page Button
—
88
Directly access radio call menu.†
—
47
Toggle between using a conventional
repeater or transmitting directly to
another radio.†
—
38
—
43
—
60
—
43
—
67
Manually initiate
Roam Request* Searching PassPort roaming
function.†
Scan/Delete
Nuisance
Channel
Long Press
Toggle transmit power level between high
and low.†
Turn PassPort
Group, All Group,
and System scan
on or off.
Stop PassPort
roaming function.
Delete a nuisance
channel while
scanning.
Site/MIN View*
—
Display the PassPort site number on
which the unit is registered, the Home
Site and unit’s MIN (Mobile Identity Number).†
Speed Dial
—
Quickly access speed dial phone list.†
†
This feature is activated by EITHER a short OR a long press, but not both.
§
Conventional operation only.
‡ LTR
trunked operation only.
RADIO OVERVIEW
Feature
*PassPort trunked operation only.
25
English
03_Radio Overview.fm Page 26 Monday, April 15, 2002 5:26 PM
RADIO OVERVIEW
Programmable Features (Cont.)
Feature
Indicator
Squelch §
—
Toggle squelch level between tight and
normal.†
—
88
Voice Storage
Record/Playback
—
Playback recorded
messages.
—
77
Voice Storage
Playback Exit
—
Exit Voice Storage Play Back mode.†
—
77
Voice Storage
Playback Delete
—
Delete recorded messages.†
—
78
Volume Set
—
Sound a tone for
adjusting your
radio’s volume level.
35
Edit Scan List
—
—
Long Press
Hold Down
Record voice
memos.
—
Add, Delete, or prioritize talkgroups or
channels.
†
This feature is activated by EITHER a short OR a long press, but not both.
§
Conventional operation only.
26
English
Short Press
‡ LTR
trunked operation only.
Page Button
60
*PassPort trunked operation only.
03_Radio Overview.fm Page 27 Monday, April 15, 2002 5:26 PM
In addition to having visual indicators, some
programmable buttons use tones to indicate
one of two modes:
Button
High-Low Tone Low-High Tone
Scan
Stop scan
Start scan
Power Level
High power
selected
Low power
selected
Squelch (no
Normal squelch Tight squelch
visual indicator)
High-Low Tone
Keypad Lock
Unlocked
Locked
Low-High Tone
Repeater/
Talkaround
Uses
conventional
repeater
Does not use
conventional
repeater
RADIO OVERVIEW
AUDIO INDICATORS FOR
PROGRAMMABLE BUTTONS
27
English
RADIO OVERVIEW
03_Radio Overview.fm Page 28 Monday, April 15, 2002 5:26 PM
Notes
28
English
04_GetStarted.fm Page 29 Monday, April 15, 2002 4:17 PM
ADJUSTING THE VOLUME
GETTING STARTED
TURNING THE RADIO ON OR OFF
On/Off/Volume
Control Knob
OFF
Push the On/Off/
Volume Control knob.
Push the On/Off/
Volume Control knob
until you hear a click and
the display clears.
If power-up is
successful, you hear
the Self-Test Pass Tone
–or–
Hold down the Volume Set button (see
page 26). You hear a continuous tone.
Turn the On/Off/Volume Control knob to
the desired volume level.
Release the Volume Set button.
GETTING STARTED
ON
Turn the On/Off/Volume Control knob
clockwise to increase the volume, or
counterclockwise to decrease the volume.
and see the LED
momentarily turn
green.
If the radio fails to
power up, you hear the
Self-Test Fail
Tone
29
English
04_GetStarted.fm Page 30 Monday, April 15, 2002 4:17 PM
SELECTING A TRUNKED ZONE
AND TALKGROUP
GETTING STARTED
Note:
Throughout this manual there are
features listed as trunked and conventional. Trunked indicates the feature functions in both PassPort and
LTR zones unless otherwise noted.
Conventional indicates the feature
functions in Conventional zones
only.
Up to 15 PassPort and/or LTR trunked zones
(containing 16 talkgroups each) can be
programmed into your radio.
To Send a Trunked Call
Hold the microphone in a vertical position
at a distance of about 1 to 2 inches (2.5
to 5 cm) from your mouth.
Press and hold the PTT button.
–or–
Press and release the PTT button and
wait 3 seconds.
•
v or w to select the appropriate
trunked zone.
y or z until you see the desired
preprogrammed talkgroup on the display.
30
If access to the trunked system was
successful, the red LED indicator
lights steady.
To select a trunked zone and talkgroup:
Note: N (the PassPort Zone symbol)
appears when a PassPort Zone has
been selected.
English
SENDING A TRUNKED CALL
•
In addition, your dealer can
program your radio to sound a
short, high-pitched (talk permit)
tone, indicating successful trunked
system access.
If access to the trunked system was
unsuccessful, the red LED indicator
flashes and a low-pitched (talk
prohibit) tone sounds, indicating that
the system was busy or out-of-range.
04_GetStarted.fm Page 31 Monday, April 15, 2002 4:17 PM
With the PTT button depressed, speak
clearly into the microphone
Release the PTT button to listen.
DIRECT ZONE ACCESS
The Direct Zone Access feature offers an
alternative way of accessing a trunked or
conventional zone.
To Activate Direct Zone Access
Press the preprogrammed Direct Zone
Access button (see page 26).
Up to a total of 16 conventional channels, in
one or more conventional zones, can be
programmed into your radio.
y or z until you see the desired
zone on the display.
u to confirm your selection.
To Select a Conventional Zone and Channel
v or w to select the appropriate
conventional zone.
y or z until you see the desired
conventional channel on the display.
DIRECT CHANNEL ACCESS
The direct channel access feature allows you
to directly access a specific trunked talkgroup
or conventional channel within the zone you
have currently selected. This feature can be
programmed on one of the radio
programmable buttons (P1, P2, P3 or P4) and/
or any DTMF microphone (RMN4026)
programmable buttons (A, B or C).
GETTING STARTED
SELECTING A CONVENTIONAL
ZONE AND CHANNEL
31
English
04_GetStarted.fm Page 32 Monday, April 15, 2002 4:17 PM
To Start Activate Direct Channel Access
Using the DTMF microphone:
Using the radio’s programmable buttons:
Press the preprogrammed Direct
Channel button.
The current talkgroup or channel flashes
intermittently.
The current talkgroup or channel flashes
intermittently.
GETTING STARTED
YR TKGP ALIAS
YR TKGP ALIAS
Up or down arrow y or z to select
the appropriate Trunked talkgroup or
channel.
If Menu/Channel Up feature is
preprogrammed on the DTMF microphone
press it to select the appropriate talkgroup or
channel.
Press y or z
The new selected talkgroup or channel
appears on the display
NW TKGP ALIAS
Up or down arrow y or z to select the
appropriate Trunked talkgroup or channel.
–or–
Press again the preprogrammed Direct
Channel button.
–or–
Press the preprogrammed Direct Channel
button (A, B, or C).
Press again the preprogrammed Direct
Channel button.
–or–
Press select/enter button on the microphone (if preprogrammed).
The new selected talkgroup or channel
appears on the display.
NW TKGP ALIAS
32
English
04_GetStarted.fm Page 33 Monday, April 15, 2002 4:17 PM
SENDING A CONVENTIONAL CALL
Note: In the United States, FCC regulations
require you to monitor the conventional
channels before sending a call. The
monitor feature (see page 25) can be
accessed through one of your
programmable buttons.
RECEIVING A TRUNKED OR
CONVENTIONAL CALL
Turn your radio on.
Adjust your radio’s volume (see page 29).
v or w to select the desired trunked
or conventional zone, then y or z
until you see the desired preprogrammed
talkgroup or conventional channel on the
display.
To send a conventional call:
Hold the microphone in a vertical position
at a distance of about 1 to 2 inches (2.5
to 5 cm) from your mouth.
Press the PTT button and speak clearly
into the microphone. The red LED indicator lights steady while the call is being
sent.
Release the PTT button to listen.
•
Make sure the PTT button is released.
Listen for voice activity. The red LED indicator flashes when your radio is receiving.
GETTING STARTED
Note: In PassPort mode, the Mobile
Identity Number (XXXX) of the
calling radio appears on the display
if enabled.
XXXX
33
English
04_GetStarted.fm Page 34 Monday, April 15, 2002 4:17 PM
REPEATER OR TALKAROUND J
MODE
(CONVENTIONAL OPERATION ONLY)
Talkaround Mode enables you to communicate
with another radio when either:
•
The repeater is not operating
GETTING STARTED
–or–
•
Your radio is out of the repeater’s range but
within communicating distance of another
radio.
Note: The J symbol appears on the LCD
screen when Talkaround Mode is
selected.
To Select either Repeater Mode or
Talkaround Mode
Press the preprogrammed Repeater/
Talkaround button (see page 25) to toggle
between Repeater Mode and Talkaround Mode.
34
English
–or–
) to enter Menu Mode.
y or z until
Rptr/Talkarnd
) to select
Rptr/Talkarnd
y or z until
Talkarnd Mode
–or–
Talkarnd Mode
) to confirm your selection.
04_GetStarted.fm Page 35 Monday, April 15, 2002 4:17 PM
CALL LIGHT
HORN AND LIGHTS
(TRUNKED OPERATION ONLY)
When you are away from your vehicle, the
Horn and Lights feature notifies you when a
call is received by activating your vehicle’s horn
and lights. This feature can be triggered by a
call alert in LTR trunked or conventional mode.
It also can be associated with call light in LTR
trunked and PassPort mode.
The Call Light indicator informs you that you
have received a call from a specified talkgroup
(as programmed by your dealer). The yellow
LED indicator flashes continuously, indicating
that a call has been received.
To Turn the Call Light Off
Turn the radio off, then on again.
•
Select another trunked or conventional
zone.
•
Press the PTT button.
•
Press any preprogrammed button.
To Activate Horn and Lights Programmed
with Call Light (Trunked Operation Only)
HOME CHANNEL
The Home Channel feature allows you to
instantly access your favorite trunked talkgroup
or channel at the touch of a button.
To Activate Home Channel
Press the preprogrammed Home Channel
button (see page 25).
Press the preprogrammed Horn and
Lights button. The LED flashes yellow
continuously, indicating that a call has
been received.
you see
CURRENT TKGP
Once the delay timer has expired, the
horn and lights of the vehicle go off.
Press any buttons on the radio or the
DTMF microphone to deactivate it.
GETTING STARTED
•
35
English
04_GetStarted.fm Page 36 Monday, April 15, 2002 4:17 PM
To Activate Horn and Lights Programmed
with Call Alert
(LTR Trunked and Conventional Operation
Only)
GETTING STARTED
Press the preprogrammed Horn and
Lights button. When you receive a call
alert, you can see the preprogrammed
name or ID of the calling radio:
NAME OR ID
Note:
If preprogrammed, alert tones (either
once or continuously) may sound.
Press any buttons on the radio or the
DTMF microphone to deactivate it.
Note: There are options available in the
CPS (Customer Programming
Software), which don’t require you
to manually activate Horn and
Lights. Please see your dealer for
additional information.
REMOTE MONITOR
(LTR TRUNKED AND CONVENTIONAL
OPERATION ONLY)
Remote Monitor allows you to automatically
key-up another radio to listen-in on all
surrounding audio. This feature can be initiated
by a dispatcher to a mobile radio, or from a
mobile radio to another mobile radio.
To Activate Remote Monitor
) to enter Menu Mode.
y or z until
Radio Call
) to select
Radio Call
y or z until
Remote Monitor
) to select the appropriate call list
member:
MDC CALL 01
Note: An audio or visual indication may
come up on the receiving radio if
preprogrammed by your dealer.
36
English
04_GetStarted.fm Page 37 Monday, April 15, 2002 4:17 PM
To cancel Remote Monitor, press any
button on the radio.
Note: Remote monitor automatically
ceases after one transmit and one
receive cycle.
GETTING STARTED
37
English
04_GetStarted.fm Page 38 Monday, April 15, 2002 4:17 PM
GETTING STARTED
Notes
38
English
PASSPORT TRUNKING
PassPort is an enhanced, wide-area trunking
protocol developed by Trident Micro Systems.
Up to 128 trunked sites can be linked together
to form one PassPort system, which means
that your communications can extend far
beyond the reach of a single trunked site.
SEAMLESS ROAMING
Initial Registration
Before communications with your talkgroup
can begin, your radio needs to register on the
PassPort system. Registration automatically
takes place upon radio power up or after
selecting the desired PassPort zone on the
selector knob. What you see:
1 Upon radio Power up, you see:
(if you select a PassPort zone after the
radio is powered up, see step 2).
PASSPORT
2 The selected PassPort zone alias
appears on the display.
ZONE ALIAS
3 The selected Talkgroup Alias appears
on the display.
TLKGRP ALIAS
PASSPORT
TRUNKING
PassPort Trunking systems offer you the ability
to seamlessly roam among all sites in a
network. Seamless Roaming means that you
do not have to manually change the zones on
the radio when roaming from site-to-site. As
you roam throughout a PassPort System’s
coverage area, your CDM1550•LS+ radio is
regularly monitoring the RSSI (Received
Signal Strength Indication) level of the site on
which you are currently registered. In addition,
if the signal strength falls below the acceptable
threshold pre-programmed by your dealer, your
radio starts monitoring the RSSI level of
adjacent sites within the network. This allows
the CDM1550•LS+ radio to quickly roam to the
site with the strongest signal, which provides
you with optimal audio quality throughout your
communications.
39
English
Note: If the radio performs a more
extensive frequency search in order to
attempt successful registration, you may see
on the display:
SEARCHING
4 Upon successful PassPort Registration,
you see:
REG SITE XXX
Note: Your radio sounds a “Low-High” tone
upon successful PassPort System registration. The XXX number indicates the site within
the PassPort system on which you have registered.
TLKGRP ALIAS
PASSPORT
TRUNKING
After successfully registering at a site,
the selected PassPort talkgroup alias
appears and remains on the display.
Roaming and Registering Between Sites
Once initial registration with the PassPort
system has occurred, your radio constantly
monitors the RSSI to ensure an acceptable
signal level is maintained (as programmed by
your dealer). When the RSSI in the radio falls
below this acceptable level, the CDM1550•LS+
attempts to roam to and register onto another
site within the PassPort system.
This process happens automatically and
requires no action by you. What you see:
1 When the radio is searching for a new
site or attempting successful registration
to a site, you see on the display:
SEARCHING
Note: This message is displayed until successful registration.
2 When the radio has successfully registered to the new PassPort System, XXX
indicates the site number you see on the
display.
REG SITE XXX
40
English
3 The selected PassPort talkgroup alias
appears and remains on the display.
TLKGRP ALIAS
The display indicates the Home Site
Number (HSID) and Mobile Identity
Number.
IAM XXX-YYYYY
XXX indicates the HSID, YYYYY indicates the MIN.
SITE/MIN VIEW
There may be circumstances when you want to
view the number of the PassPort site on which
you are registered as well as your Mobile
Identity Number (MIN).
Note:
This message can be activated if the
radio is not registered.
To Start And Stop Viewing Site/MIN
1 Press the preprogrammed SITE/MIN
View button (see page 26).
The display shows the number of the site
on which you are currently registered.
site now XXX
PASSPORT
TRUNKING
Note: If the preprogrammed button is activated prior to or during registration, a bad key
chirp is sounded and you see on the display:
site now n/a
41
English
ROAM REQUEST
Because of the RSSI feature, the
CDM1550•LS+ radio automatically roams to a
different site when the signal from the
registered site becomes too weak for quality
communication. This RSSI threshold is
programmed by your dealer. However, if you
believe the signal strength would be better on
another site, you may want to manually initiate
the roaming process. This feature is called
Roam Request.
To Start a Roam Request
1 Press the preprogrammed Roam
Request button (see page 25).
2 When the radio is searching for a new
site or attempting successful registration
to a site, you see on the display:
PASSPORT
TRUNKING
SEARCHING
REG SITE XXX
Note: A bad key chirp may sound and you
see on the display:
Roam Not Avail
• When registration to a site with a
higher RSSI than your current site is
unavailable.
• When the preprogrammed button is
pressed before the radio has collected
its “neighbor list”. A Neighbor list” is a
list of frequencies from adjoining sites
within the PassPort system that are
used during the roam process.
• When the radio is programmed for a
single home system.
In these cases, wait a few seconds and
try again.
42
English
3 When the radio has successfully registered to the new PassPort System, you
see on the display:
4
The selected PassPort talkgroup alias
appears and remains on the display:
TLKGRP ALIAS
To Cancel a Roam Request
Press and hold the preprogrammed
Roam Request button (see page 25)
again.
You see:
Note:
Cncl Roam Req
TROUBLESHOOTING
While in PassPort zones, there are some
specific display messages that indicate you
should contact your dealer for assistance.
Message
What it Means
“Invalid Group ID” Your dealer needs to verify talkgroup programming in your
radio or the PassPort system.
“DISABLED”
Your radio requires reactivation
on the PassPort system (not
applicable to conventional and
LTR functionality).
Blank display
upon power up .
Your radio needs to be returned
to your dealer for reactivation or
service.
The radio then attempts to return to
the previously registered site.
PASSPORT
TRUNKING
43
English
PASSPORT
TRUNKING
Notes:
English
44
RADIO CALLS
MAKING A SELECTIVE CALL
(LTR TRUNKED AND CONVENTIONAL
OPERATION ONLY)
You can make a selective call to a particular
radio or to a group of radios, as programmed
by your dealer.
–or–
Enter with the DTMF microphone the ID
number of the radio you want to call.
7 Press the PTT button to send the call.
To Make a Selective Call
• The radio sounds a continuous tone, if
programmed by your dealer.
Press the preprogrammed Radio Call button
(see page 25), and proceed to step 4.
• The LED lights a solid yellow.
RADIO CALLS
6 y or z to locate the desired ID in
the Radio Call List.
8 Press the PTT button and talk; release
the PTT button to listen.
–or–
1 ) to enter menu mode.
If not received, you see:
2 y or z until
Radio Call
3 ) to select
Radio Call
4 y or z until
Selective Call
–or–
5 ) to select
Selective Call
Hold down ( to exit menu mode.
No Acknowledge
9 ( to return to
Selective Call
45
English
RADIO CALLS
RECEIVING A SELECTIVE CALL F
To Send a Call Alert Page
(LTR TRUNKED AND CONVENTIONAL
OPERATION ONLY)
Press the preprogrammed Radio Call button
(see page 25) and proceed to step 4:
When you Receive a Selective Call
The display shows F and the preprogrammed name or ID of the calling radio.
2 y or z until
Radio Call
•
The LED indicator flashes yellow, if programmed by your dealer.
3 ) to select
Radio Call
•
You hear an alert tone.
4 y or z until
Call Alert
5 ) to select
Call Alert
To answer the call, press the PTT button.
Note:
Unless you make a Selective Call back to
the caller, your response is heard by all
members of your talkgroup.
6 y or z to locate the desired ID in
the Radio Call List.
SENDING A CALL ALERT PAGE
–or–
(LTR TRUNKED AND CONVENTIONAL
OPERATION ONLY)
Enter with the DTMF microphone the ID
number of the radio you want to page.
You can alert another person by sending a Call
Alert page.
46
English
1 ) to enter menu mode.
•
7 Press the PTT button.
You see:
RECEIVING A CALL ALERT PAGE
and the preprogrammed name or ID
alternating on the display.
• The LED alternates between a solid
yellow and solid red while the call is in
process.
8 If the Call Alert page is received by the
target radio, you see:
Acknowledge
If not received,
you see:
No Acknowledge
• The radio sounds a short alert tone if,
programmed by your dealer.
9 ( to return to
Call Alert
–or–
(LTR TRUNKED AND CONVENTIONAL
OPERATION ONLY)
When You Receive a Call Alert Page
•
The display shows F Call Received
and the preprogrammed name or ID of the
calling radio.
•
You hear four alert tones, either once or
continuously, as programmed by your
dealer.
•
The LED indicator flashes a single yellow
for a group call, or flashes a double yellow
for an individual call.
RADIO CALLS
Call in Prog
To answer the page, press the PTT button; to
cancel the page, press any other button.
Note:
Your radio displays only the last Call Alert
page received. Also, your radio does not
receive any Selective Calls until you clear
the page.
Hold down ( to exit menu mode.
47
English
RADIO CALLS
RADIO CHECK
(LTR TRUNKED AND CONVENTIONAL
OPERATION ONLY)
Radio Check allows you to determine if a radio
is within the range of the trunked system and
turned on, without disturbing the user of that
radio. This feature can also be used when
attempts with Selective Call and Call Alert fail.
To Perform a Radio Check
1 ) to enter menu mode.
you see:
Call In Prog
8 If the Radio Check is received by the target radio, you see:
Acknowledge
If not received, you see:
No Acknowledge
9 ( to return to
Radio Call
2 y or z until
Radio Call
–or–
3 ) to select
Radio Call
Hold down ( to exit menu mode.
4 y or z until
Radio Check
5 ) to select
Radio Check
6 y or z to locate the desired ID in
the Radio Call list
–or–
Enter the ID number of the radio you are
checking.
48
English
7 Press the PTT button,
SENDING A STATUS
(CONVENTIONAL OPERATION ONLY)
This feature gives you the ability to send a
status update to the base. The status feature
makes more efficient use of the channel
compared to voice transmissions. Status
updates of up to 14 characters may be
programmed by your dealer.
SENDING A MESSAGE
To Send a Status
) to enter Menu Mode.
y or z until
Status
) to select
Status
y or z to locate the desired status in
the preprogrammed list.
–or–
when using the enhanced keypad
microphone only,
enter the number of the status you wish
to send.
–or–
if programmed by your dealer (see page
27),
(CONVENTIONAL OPERATION ONLY)
This feature gives you the ability to send and
receive preprogrammed messages. Data
messages make more efficient use of channels
compared to voice transmissions. Messages of
up to 14 characters may be programmed by
your dealer.
RADIO CALLS
To Send an Electronic (Data) Message
) to enter Menu Mode.
y or z until
Message
) to select
Message
press the button that has been
preprogrammed for a specific status.
Note: You cannot retransmit the current
status update.
49
English
RADIO CALLS
y or z to locate the desired message
in the preprogrammed list.
–or–
when using the enhanced keypad
microphone only,
enter the number of the message you
wish to send.
–or–
if programmed by your dealer (see page 27),
press the button that has been
preprogrammed for a specific message.
RECEIVING A MESSAGE
(CONVENTIONAL OPERATION ONLY)
When your radio receives a message:
•
•
You hear two alert tones.
The yellow LED indicator flashes.
•
You see:
Msg Received
alternating with the preprogrammed alias.
Note: If you receive a message that is
programmed into your radio, the display will
alternate with the following:
Message #_
and
No Alias
RESPONDING TO EMERGENCY
ALERTS E
(CONVENTIONAL OPERATION ONLY)
Your radio offers choices for initiating and
responding to Emergency Alert
communications. Choices may include:
•
50
English
Emergency Cycles - Allows the radio to
automatically cycle between transmit and
receive mode over a preprogrammed
number of times by keying with voice after it
•
•
Note: All the choices listed above are dealer
preprogrammed. See your dealer for more
details.
Decoding an Emergency Alarm
(Conventional Operation Only)
If preprogrammed by your dealer, your radio
decodes (responds to) an Emergency Alarm or
Emergency Call by:
• Sounding a unique, repeating alert tone
• Activating an external alarm
• Displaying alternating message parts on a
single line, similar to the following example:
RADIO CALLS
•
has received an Acknowledge to the alarm
you send. The default number of transmits
is one (10, maximum); the default value of
the retransmit interval is 5 seconds (one,
minimum; 60, maximum).
Emergency Alarm/Call - Gives you access
to a voice resource, on a priority basis, over
all other types of call traffic.
Emergency Remote Monitor - Enables the
dispatcher to activate the transmit circuit of
your radio, during an Emergency, to hear
the situation through your microphone. See
page 53 for more about sending an
Emergency Remote Monitor.
Remote Monitor - Enables the dispatcher
to activate the transmit circuit of your radio,
during a normal dispatch, to hear the
situation through your microphone. See
page 54 for information about sending a
Remote Monitor.
Emergency
• the word Emergency, followed by:
MDC CALL 01
• Emergency Alias from the Radio Call List
(example, MDC CALL 01), followed by:
51
English
RADIO CALLS
• Timestamp of the Emergency Alert (example, 03:55).
03:55
•
Flashing the E icon (while decoding only;
lights steady when encoding)
Multiple Queued Emergencies
Clearing the existing displayed Emergency
shows the next in the queue, if one exists.The
display updates and shows “Emerg (queued
number) of (total number)”. If no additional
Emergencies are queued, the radio exits
Emergency mode and resumes normal mode.
Three Minute Timer
Responding to an Emergency starts a threeminute timer. The radio does not generate
another Emergency Alert tone against that
Emergency Alias or ID until the three-minute
period expires. If cleared within 3 minutes, the
alarm will regenerate the alert. If the radio
receives another Emergency Alert from the
same Alias or ID, the radio acknowledges the
Emergency but does not restart the tone,
52
English
activate the external alarm, or display updated
information.
After the Timer Expires
If the three-minute timer has expired for a
specific Emergency Alias or ID, and the radio
decodes an Emergency that is currently in
queue, the radio:
•
•
•
•
Acknowledges the Emergency
Restarts the Emergency Alert tone
Activates the external alarm
Updates the time stamp on the matching
Emergency
Note: If the Radio Call List does not include an
alias for the radio ID, the ID displays. Radios
that do not support the signaling protocol
sound the alert tone, activate the external
alarm and display data.
SENDING AN EMERGENCY
REMOTE MONITOR
(CONVENTIONAL OPERATION ONLY)
(CONVENTIONAL OPERATION ONLY)
To Clear an Emergency Alert
As your radio responds to an Emergency Alert,
only the Emergency Queue menu is available.
Press any button on the radio to
cancel the Emergency Alert tone.
Press (or activate) an external push
button or foot switch.
To Access the Emergency Queue Menu
) to enter Menu Mode.
The radio
displays the list
of aliases
currently in the
Emergency
queue, similar to
that shown,
oldest to newest.
Note: You must press an external switch to clear
the visible Emergency Alias and display the
next queued Emergency Alias, if present.
You must clear all decoded Emergency
Alerts before encoding (sending) your own
Emergency Alert.
RADIO CALLS
CLEARING AN EMERGENCY
ALERT E
MDC CALL 01
z or y to view the next oldest
Emergency Remote Monitor packet and
to choose the packet to send.
Press the PTT to send the packet.
53
English
RADIO CALLS
SENDING AN EMERGENCY
ALERT E
(CONVENTIONAL OPERATION ONLY)
A priority Emergency Alert can be sent to a
specific radio or dispatch center by pressing:
•
•
•
A button preprogrammed by your dealer
(see page 27).
The foot switch
A push button accessory
Emergency Alerts have priority over all other
calls.
The E symbol appears on the display when
your radio is in the Emergency Alert state.
An Emergency Alert can be programmed to:
Show E and sound a tone
–or–
• Show the normal display
–or–
• Activate the microphone so that all activity
can be transmitted (for a predetermined
amount of time). See your dealer for more
information.
•
To cancel the Emergency Alert, press and hold
down the preprogrammed Emergency button.
54
English
SENDING A REMOTE MONITOR
The Remote Monitor gives the ability to
activate the transmit circuit of your radio – both
silently and normally – and key it. The Remote
Monitor feature depends on how your radio
responds to the Remote Monitor Command.
Upon receiving a Remote Monitor Command,
the radio:
1. Keys the transmitter.
2. Acknowledges the command
3. Sends the PTT-ID
4. Activates the microphone.
Note: If a remote microphone is attached, it
responds.
Remote Monitor capability depends on which
of two modes are preprogrammed:
• Silent Mode – When the command is sent
in Silent Mode, and the receiving radio keys
and transmits for the time set by the Remote
Monitor Command, the receiving radio will
not generate an indicator of the event.
• Non-Silent Mode – When the command is
sent in Non-Silent Mode, and the receiving
radio keys and transmits for the time set by
The amount of time that the radio remains in
receive mode or in transmit mode is set by the
Remote Monitor Command and the time
settings in the radio. When in this state,
touching any button on the radio takes it out of
the Remote Monitor mode. See your dealer for
more details.
SELECTIVE RADIO INHIBIT
(LTR TRUNKED AND CONVENTIONAL
OPERATION ONLY)
Your radio is equipped with a security feature
that can temporarily render the unit inoperative
when an inhibit signal is sent from a device that
supports Selective Inhibit Encode.
This feature is commonly used to disable radios:
•
•
•
In case of theft
When your vehicle is being serviced
For system control reasons
Note: When your radio has been disabled by the
base station, all controls will be inoperative
except for the On/Off button. When the radio
is powered up,
You see:
Radio Disabled
EDITING A RADIO CALL LIST K
(LTR TRUNKED AND CONVENTIONAL
OPERATION ONLY)
RADIO CALLS
the Remote Monitor Command, the receiving radio will generate an indicator of the
event.
Your radio has a Radio Call list that contains
the names and radio IDs of several talkgroups
or individuals. The ID numbers in the Radio
Call List are programmed by your dealer, and
cannot be changed from your radio. However,
you can edit the names associated with these
IDs. The K symbol appears on the display
when you are editing.
Note:
The radio cannot receive any calls while
you are editing.
To Edit a Call List Entry
1 ) to enter menu mode.
2 y or z until
Program Lists
55
English
RADIO CALLS
3 ) to select
Program Lists
4 y or z until
RadioCall List
5 ) to select
RadioCall List
6 y or z until
Edit Entry?
7 ) to select
Edit Entry?
NAME AND CALL TONE TAGGING
(LTR TRUNKED AND CONVENTIONAL
OPERATION ONLY)
You can program your radio to sound a
particular alert tone when a specific user is
calling (name tone tagging), or when receiving
a particular type of radio call (call tone
tagging).
Note:
8 y or z until you locate the desired
entry.
9 ) to select the entry.
Name and call tone tagging are valid only
for selective calls and call alerts.
There are seven alert tones to select from.
(see page 87.)
To Tag a Specific User’s Name
10 Use your keypad to edit the entry.
1 ) to enter menu mode.
11 ) to save your
changes.
Edit Entry?
12 ( to return to
Edit Entry?
–or–
Hold down ( to exit menu mode.
2 y or z until
Name Tone Tag
3 ) to select
Name Tone Tag
4 y or z until you see the name you
want to tag.
5 ) to confirm the selection.
56
English
7 ) to confirm the selection,
you see:
8 ( to return to
Name Tone Set
Name Tone Tag
–or–
Hold down ( to exit menu mode.
To Tag a Type of Radio Call
7 ) to confirm the selection.
8 y or z until you see and hear the
tone you want to use for this type of call.
9 ) to confirm the selection,
you see:
10 ( to return to
Call Tone Set
RADIO CALLS
6 y or z until you see and hear the
tone you want to use for this name.
Call Tone Tag
–or–
Hold down ( to exit menu mode.
1 ) to enter menu mode.
2 y or z until
Audio/Tones
3 ) to select
Audio/Tones
4 y or z until
Call Tone Tag
5 ) to select
Call Tone Tag
6 y or z until you see the call type
you want to tag.
57
English
RADIO CALLS
Notes:
58
English
SCAN
Zone
Your radio is equipped with the Scan feature,
which allows you to search for, lock onto, and
monitor voice activity on trunked talkgroups
and conventional channels.
PassPort
Primary
Auto Scan
Conventional
PassPort
Group
Scan
LTR
Auto
Group
Scan
LTR All
Group
Scan
System
Scan
•
Auto Group Scan
TALKBACK
•
All Group Scan
•
PassPort Primary Auto Scan
•
PassPort Group Scan
•
System Scan
When activity is detected during any type of
scan, scanning stops and the active talkgroup
or channel appears and remains on the display
until scanning resumes. Your dealer can
program the amount of time you can respond
(or “TALKBACK”) to the caller before your radio
resumes scanning.
The table below summarizes the Scan types
available in each zone type.
Zone
PassPort
Trunked
LTR
Trunked
PassPort
Primary
Auto Scan
PassPort
Group
Scan
LTR
Auto
Group
Scan
LTR All
Group
Scan
System
Scan
SCAN
There are five types of Scan available in your
radio:
Shaded areas indicate that Scan can be
enabled through a programmable button (see
page 20) or through your radio menu.
You must press the PTT button to participate in
the call; otherwise, scanning continues to the
other talkgroups or channels.
59
English
PASSPORT PRIMARY AUTO
GROUP SCAN
(PASSPORT TRUNKED OPERATION ONLY)
PassPort Primary Auto Group Scan
automatically scans the primary (first)
talkgroup within the selected PassPort zone.
Any time you are positioned on a PassPort
talkgroup other than the first one, your radio
automatically scans activity on the first
talkgroup within that zone.
SCAN
Note:
This feature is enabled AUTOMATICALLY
with your radio. It is not enabled through
the radio menu or through a preprogrammed scan button.
When PassPort Group Scan is Enabled
•
The G symbol appears on the display.
•
The LED indicator blinks green during
PassPort Group Scan operation; it stops
blinking when the radio switches to an
active talkgroup or channel.
Note:
•
PassPort Group Scan is not available when
registered on a non-home site.
•
If you switch to another PassPort zone, LTR,
or conventional zone while the radio is scanning, scanning resumes upon return to the
PassPort zone where PassPort Group Scan
was enabled.
•
If the radio is turned off while scanning, the
radio resumes scanning when you turn it back
on. If the radio registers on a non-home site,
scanning is not enabled until the radio registers at its home site.
PASSPORT GROUP SCAN G
(PASSPORT TRUNKED OPERATION ONLY)
PassPort Group Scan scans talkgroups within
the selected PassPort trunked zone, as
programmed by your dealer. Up to 16 different
talkgroups can be programmed into each Scan
list, with one Scan list assigned to each position
on the Zone Selector. You can edit these Scan
lists through your radio’s menu (see page 64).
60
English
To Start or Stop PassPort Group Scan
Operation through a Preprogrammed
Button (see page 20)
•
Press the preprogrammed Scan button to
start PassPort Group Scan.
•
Press the preprogrammed Scan button
again to stop the PassPort Group Scan.
AUTO GROUP SCAN
(LTR TRUNKED OPERATION ONLY)
Auto Group Scan automatically scans
talkgroups within an LTR zone as programmed
by your dealer. Auto Group Scan can be either
non-prioritized or prioritized.
Non-prioritized Auto Group Scan
automatically scans all talkgroups
programmed with Auto Group Scan.
To Start or Stop PassPort Group Scan
Operation through the Menu
•
Prioritized Auto Group Scan automatically
scans the selected talkgroup and all lower
4-numbered talkgroups. For example, if
talkgroups 1, 3, and 4 have been
programmed by your dealer with Auto
Group Scan and talkgroup 4 is selected,
the radio automatically scans talkgroups 1,
3, and 4, and skips talkgroup 2.
1 ) to enter menu mode.
2 y or z until
Pass Grp Scan
3 ) to select
Pass Grp Scan
You see the current scan status.
4 y or z until
–or–
PpGp Scan Off?
PpGp Scan On?
5 ) to confirm your selection.
SCAN
•
–or–
To Start Auto Group Scan
Select a talkgroup that has been programmed
for Auto Group Scan by your dealer.
Note:
You do not need to press a
preprogrammed Scan button.
61
English
•
The G symbol appears on the display
when non-prioritized Auto Group Scan has
been activated.
Note:
•
The H symbol appears on the display
when prioritized Auto Group Scan has
been activated.
To Start or Stop All Group Scan Operation
through a Preprogrammed Button (see
page 20)
•
There is no LED indicator during Auto
Group Scan.
•
Press the preprogrammed All Group Scan
button once to start All Group Scan.
•
Press the preprogrammed All Group Scan
button again to stop All Group Scan.
SCAN
To Stop Auto Group Scan
Select a talkgroup that has not been
programmed for Auto Group Scan by your
dealer.
ALL GROUP SCAN
If you enter menu mode while the radio is
scanning, scanning stops. It resumes when
you exit menu mode.
–or–
To Start or Stop All Group Scan Operation
Through the Menu
(LTR TRUNKED OPERATION ONLY)
1 ) to enter menu mode.
All Group Scan scans all talkgroups within the
selected LTR trunked zone.
2 y or z until
All Group Scan
When All Group Scan is enabled:
3 ) to select
All Group Scan
•
The G symbol appears on the display.
•
The LED indicator blinks green during All
Group Scan operation; it stops blinking
when the radio switches to an active talkgroup.
You see the current scan status.
4 y or z until
–or–
All Group On?
All Group Off?
5 ) to confirm your selection.
62
English
SYSTEM SCAN G
(LTR TRUNKED AND CONVENTIONAL
OPERATION ONLY)
System Scan scans trunked talkgroups and
conventional channels between LTR and
conventional zones, as programmed by your
dealer. Up to 16 different talkgroups or
conventional channels can be programmed
into each Scan list. You can edit these lists
through your radio’s menu (see page 64).
•
The G symbol appears on the display.
•
The LED indicator blinks green during System Scan operation; it stops blinking when
the radio switches to an active talkgroup or
channel.
Note:
If you enter menu mode while the radio is
scanning, scanning stops. It resumes when
you exit menu mode.
1 ) to enter menu mode.
2 y or z until
System Scan
3 ) to select
System Scan
You see the current scan status.
4 y or z until
–or–
Sys Scan On?
Sys Scan Off?
5 ) to confirm your selection.
Note:
SCAN
When System Scan is Enabled
Do the following:
In conventional zones only, if there is
activity on a non-priority channel, the
radio disconnects the user from the
current conversation and automatically switches to an active priority
channel. This is indicated with a
short alert tone.
To Start or Stop a System Scan Operation
Press the preprogrammed Scan button (see
page 20) to start or stop scanning,
–or–
63
English
DELETING A NUISANCE CHANNEL/
TALKGROUP
Restoring a Channel/Talkgroup Back to the
Scan List
(PASSPORT GROUP SCAN OR SYSTEM
SCAN OPERATION ONLY)
To restore a previously deleted talkgroup or
channel back to the Scan list, restart the scan
operation or turn your radio off and on again.
SCAN
If a talkgroup or channel continually generates
unwanted calls (a “nuisance” channel), use the
preprogrammed Scan button to temporarily
delete the talkgroup or channel from the Scan
list.
To Temporarily Delete the Channel/
Talkgroup
1 While the radio’s receiving activity is on
the nuisance channel, press and hold the
Scan button until you hear a high-pitched
tone (valid key press).
2 Release the Scan button. The nuisance
channel has been temporarily deleted
from your Scan list.
Note:
64
English
In PassPort mode, you cannot delete
a priority channel/talkgroup (see
page 66), or the currently selected
talkgroup in a Scan list.
Note:
In PassPort mode, the talkgroup can also
be restored by scrolling through the list, or
switching the current selected talkgroup or
zone
EDITING A SCAN LIST
(PASSPORT GROUP SCAN OR SYSTEM
SCAN OPERATION ONLY)
One Scan list is assigned to each of the 16
positions on the Zone Selector. Each Scan list
can contain up to 16 talkgroups and/or
channels. The same talkgroup or channel can
be included in several Scan lists, and the same
Scan list can be assigned to several Zone
Selector positions.
When you edit a Scan list, you can either add,
delete, or prioritize talkgroups or channels.
Note:
In PassPort mode, talkgroups cannot be prioritized.
5 ) to select
Scan List
Your radio cannot receive any calls while you
are editing a Scan list. The K symbol is
displayed while you are in edit mode.
6 y or z until
Add Entry?
Note:
7 ) to confirm your selection.
In Conventional operation only, even if
there is activity on a non-priority channel,
your radio automatically switches to an
active priority channel and indicates the
activity with a short tone.
1 ) to enter menu mode.
2 y or z until
Program Lists
3 ) to select
Program Lists
4 y or z until
Scan List
Note:
One Scan list per mode of operation
is available.
y or z until you see the talkgroup or
channel you want to add or delete.
Note:
You cannot delete the Primary talkgroup or your selected talkgroup off a
Scan List in PassPort mode.
) to confirm your selection.
SCAN
ADDING OR DELETING
TALKGROUPS OR CHANNELS
IN A SCAN LIST
Delete Entry?
or until
10 If you added a talkgroup or channel,
you see:
–or–
Entry Saved
If you delete a talkgroup or channel,
you see:
Delete?
) to confirm the deletion.
you see:
Entry Deleted
65
English
11 ( to return to
to return to
–or–
Add Entry?
Priority Channel
Delete Entry?
Channel 2
(Priority 1) and
Channel 8
(Priority 2)
Hold down t to exit menu mode.
Note:
PRIORITIZING A TALKGROUP OR
CHANNEL IN A SCAN LIST
SCAN
(SYSTEM SCAN OPERATION ONLY)
You may want to check the activity on one or
two talkgroups or channels more frequently
than others. You can do this by prioritizing
them:
Priority Channel
None specified
Ch1➠Ch2➠Ch3➠
Ch4➠…Ch1
Channel 2
(Priority 1)
Ch2➠Ch1➠Ch2➠Ch3➠
Ch2➠Ch4➠Ch2➠…Ch1
66
English
Scanning Sequence
Scanning Sequence
Ch2➠Ch1➠Ch8➠Ch3➠
Ch2➠Ch4➠Ch8➠…Ch1
In Conventional operation only, even if
there is activity on a non-priority channel,
your radio automatically switches to an
active priority channel and indicates the
activity with a short tone.
Setting Priority Talkgroups or Channels
1 ) to enter menu mode.
Program Lists
3 ) to select
Program Lists
4 y or z until
Scan List
5 ) to select
Scan List
6 y or z until
Edit Priority?
7 ) to select
Edit Priority?
8 y or z until
Priority #1?
or until
12 ( to return to
Edit Priority?
–or–
Hold down ( to exit menu mode.
Note:
You cannot reprioritize a priority 1 talkgroup or channel to priority 2.
SCAN
2 y or z until
11 ) to prioritize that talkgroup or
channel.
Priority #2?
You see the current priority talkgroup or
channel.
9 ) to select the desired priority level.
10 y or z until you see the talkgroup or
channel you want to prioritize.
67
English
SCAN
Notes
68
English
PHONE
Your radio allows you to place and receive
telephone calls through trunked and
conventional systems (depending on phone
line availability). Telephone calls through a
repeater allow only one person to speak at a
time.
2 ) to enter menu mode.
–or–
Press the preprogrammed radio or DTMF
microphone Phone button, and skip to
step 5.
–or–
a. Press and release the Speed Dial
button to use the speed dial feature.
MAKING A PHONE CALL D
THROUGH A TRUNKED SYSTEM
Note:
b. Press the (1 to 9) key corresponding
to the number you want to call on the
Phone list. Or press 0 if you want to
call the last number dialed.
The following instructions assume your
radio has been programmed as follows by
your dealer using CPS (Customer Programming Software).
c. Press the PTT button. A dial tone
sounds.
Dial type: Live
d. Press the PTT button again to send
the phone number.
•
Access/Deaccess type: Immediate Auto
–or–
•
Tone Span: Timed - 100 ms tone duration
For LTR trunked systems, press and hold
the PTT button while dialing a number.
To Initiate a Phone Call
Do the following:
1 Select a trunked zone and talkgroup that
have been programmed for telephone.
3 y or z until
Phone
) to confirm
Phone
PHONE
•
69
English
D appears on the display when you are
in Phone mode.
Hold the radio in a vertical position with
the microphone 1 to 2 inches (2.5 to 5
cm) away from your mouth. Press the
PTT button to talk; release it to listen.
To disconnect the phone call:
Press and hold ( to exit Phone.
D no longer appears on the display.
5 Press and Release the PTT button.
•
If phone access is successful, a dial
tone sounds.
•
If phone access is unsuccessful, a
low-pitched alternating tone sounds.
Disconnect the call (see step 8) and
try again.
Enter the phone number with the DTMF
microphone. The number is automatically
sent without pressing the PTT button
again.
–or–
PHONE
y or z to
select a number
from the phone list.
Press and release the PTT button again
to send the number.
70
English
XXX-XXX-XXXX
MAKING A PHONE CALL D
THROUGH A CONVENTIONAL
SYSTEM
To Initiate a Phone Call
Press the preprogrammed Phone button, and
skip to step 5.
–or–
Press the PTT button, and if the Hot keypad
feature has been programmed by your dealer,
do the following:
1 Select a conventional zone and channel
that have been programmed for telephone.
2 ) to enter menu mode.
3 y or z until
Phone
4 ) to select
Phone
D appears on the display when you are
in Phone Mode.
(For conventional operation with auto
access only). You hear a series of tones,
indicating that an access code is being
sent automatically, and see your access
code:
–or–
Enter your access code using the DTMF
microphone keypad.
When you hear a dial tone:
–or–
XXX-XXX-XXXX
XXX-XXX-XXXX
a. Press and release the preprogrammed Speed Dial button (see
step 6) to use the Speed Dial feature.
b. Press the key (1 to 9) corresponding
to the number you want to call, or
press 0 if you want to call the last
number dialed.
Note:
To redial the last number dialed (if
not using Speed Dial), press and
release the PTT button immediately
after the access code is sent. The
radio sends the last number dialed.
–or–
If you entered your access code
using the keypad, press z once
to access the last number dialed;
then press and release the PTT button.
PHONE
Enter the phone
number using the
DTMF microphone
keypad.
y or z to
select a number
from the phone list.
–or– (see step 7)
71
English
8
Press and release the PTT button, if
required for your radio.
Hold the radio in a vertical position with
the microphone 1 to 2 inches (2.5 to 5
cm) away from your mouth. Press the
PTT button to talk; release it to listen.
10 To disconnect a phone call, do one of the
following:
RECEIVING A PHONE CALL D
THROUGH A TRUNKED OR
CONVENTIONAL SYSTEM
To Receive a Phone Call
1 y o r z to select a LTR talkgroup or
conventional channel that has been
programmed for telephone.
–or–
Enter the deaccess code using the DTMF
microphone keypad.
–or–
Activate any scan type containing a telephone talkgroup or channel (see page
59).
If your radio has the deaccess code
programmed, go to step 9.
Note:
11 To exit Phone Mode:
PHONE
Press and hold # to disconnect the
call. D disappears from the display.
When a phone call is received, a ringing tone sounds, alerting you to
answer the phone call.
Note:
72
English
•
No PassPort talkgroup or zone
selection is needed in PassPort
mode.
The D also appears on the display in
PassPort mode.
2 Press the PTT button to answer the
phone call. Press the PTT button to talk;
release it to listen.
To Add an Entry
) to enter menu mode.
y or z until
Program Lists
) to select
Program Lists
y or z until
Phone List
) to select
Phone List
MODIFYING THE PHONE LIST K
y or z until
Add Entry?
Your radio contains a Phone list that holds up
to 25 phone numbers. The Phone list is shared
between trunked and conventional Phone
operation. You can modify the Phone list in
three ways through your radio’s menu:
) to select,
Add Entry?
you see:
Entry Name
3 To disconnect the phone call and exit
Phone and menu mode:
Press and hold to disconnect the call.
Note:
D no longer appears on the display
in PassPort mode.
Add an entry
•
Delete an entry
•
Edit an existing entry
The K symbol appears on the display when
you are modifying the phone list.
Use the DTMF microphone keypad to
enter the name (see page 23 and page
24).
) to store the name,
you see:
PHONE
•
Enter Phone #
73
English
10 Use the DTMF microphone keypad to enter
the phone number. You can also add a dash
(press w) and a Pause Indicator (hold
down # until the # character on the display changes to a “P”).
) to select
Program Lists
y or z until
Phone List
) to select
Phone List
11 ) to store the phone number.
y or z until
Delete Entry?
12 y or z until you see the location in
the list where you want to store the phone
number.
) to select
Delete Entry?
y or z until you see the entry you
want to delete.
) to select the entry,
13 ) to store the phone number,
Entry Saved
you see:
14 ) to return to
Add Entry?
PHONE
Hold down ( to exit menu mode.
To Delete an Entry
) to enter menu mode.
y or z
74
English
until
Program Lists
you see:
Delete?
10 ) again to confirm the deletion,
you see:
11 ( to return to
–or–
Entry Deleted
Delete Entry?
Hold down ( to exit menu mode.
To Edit an Entry
10 y or z until
) to enter menu mode.
y or z until
Program Lists
(to edit the name),
) to select
Program Lists
(to edit the phone number),
y or z until
Phone List
or until
) to select
Phone List
(to edit the location in the phone list).
y or z until
Edit Entry?
11 ) to confirm your selection.
) to select
Edit Entry?
y or z until you see the entry you
want to edit.
) to select the entry.
12 Use the DTMF microphone keypad to
edit the entry (see page 19),
–or–
y or z until you see the location
where you want to store the phone number.
Edit Name?
or until
Edit Number?
Edit Location?
13 ) to store the information.
PHONE
14 ( to return to
Edit Entry?
–or–
Hold down ( to exit menu mode.
75
English
PHONE
Notes
76
English
The CDM1550•LS+ radio’s voice storage feature
enables your radio to perform seven types of
voice related functions:
•
Incoming Call Recording
•
Voice Memo Recording
•
Recorded Message Playback
•
Recorded Message Delete
•
Recorded Message Transmission
•
Automatic Message Reply (“When
Available”)
•
Message Time Stamping
There is a total of 120 seconds recording time
available for all voice storage activity. Your
dealer can divide the 120 seconds into a
defined number of equal length time slots. The
following table summarizes the slot length
options available with the CDM1550•LS+ radio:
Number of Equal
Length Slots
Slot Length
(Seconds)
120
60
24
10
12
20
VOICE STORAGE
VOICE STORAGE
When recording calls, keep in mind these
time slot guidelines:
•
As a time slot becomes close to full, you
see a timer count down the final 5
seconds.
When a time slot is completely full, an
alert tone sounds
The display shows:
Recording stops.
•
Msg Slot Full
When all message slots have at least one
message stored, an alert tone sounds.
77
English
VOICE STORAGE
If a voice storage
record function is
requested, the display shows:
Memory Full
INCOMING CALL RECORDING
The CDM1550•LS+ radio allows you to record
incoming calls in either of two ways:
•
Selective Incoming Call Recording
•
All Incoming Call Recording
Note:
Only the audio transmissions of your caller
is recorded.
Selective Incoming Call Recording
This feature enables you to record incoming
calls selectively, or on a call-by-call basis.
To Selectively Record an Incoming Call
1 Press and hold the preprogrammed
Record/Playback button (see page 26)
while receiving the call.
The display shows
78
English
Recording
A confirmation tone sounds, indicating
that the radio begins recording.
2 The radio records the call until the message slot is full or until you release the
preprogrammed Record/Playback button.
3 Release the Record/Playback button to
stop recording.
All Incoming Call Recording
This feature enables you to automatically
record all incoming trunked and conventional
dispatch calls, trunked and conventional
telephone interconnect calls, and MDC
selective calls.
This feature is useful when you need to keep
informed of channel activity while away from
your radio.
Note:
This feature does not work while in scan
mode.
To Record All Incoming Calls
VOICE STORAGE
9 The display shows while your radio is
recording.
Recording
) to enter menu mode.
y or z until
Voice Storage
) to select
Voice Storage
y or z until
Record
) to select
Record
–or–
y or z until
All Incoming
Go to step 1 again to continue recording
in the next available slot.
) to select
All Incoming
The display continuously flashes,
except while a call
is being recorded.
All Incoming
The radio also records the time stamp
and the channel alias to the message
slot.
10 Press ( to stop recording.
Note: Five seconds
before the message
slot ends, the radio
display shows
Time Left XX
(where XX = remaining seconds).
The “voice storage full” alert sounds when the
message slot is full, and recording stops.
The display shows:
Msg Slot Full
79
English
VOICE STORAGE
VOICE MEMO RECORDING
In addition to recording calls received, the
CDM1550•LS+ radio offers you the ability to
record voice memos (or personal reminders)
into the radio. The voice memo recording
feature is useful for quickly saving phone
numbers, names, or any other brief voice
information. You can record voice memos using
the preprogrammed Record/Playback button
(see page 26) or your radio’s menu.
To record properly, incoming calls cannot be
received while a voice memo is being
recorded.
To Record a Voice Memo using the
Preprogrammed Record/Playback Button
1 Press and hold the preprogrammed
Record/Playback button.
The display shows:
Recording
•
80
English
3 Release the Record/Playback button to
stop recording.
To Record a Voice Memo using the Menu
Important Note:
•
2 Without pressing the PTT button, speak
clearly into the microphone to record your
memo. The radio records your memo
until the message slot is full or until you
release the preprogrammed Record/
Playback button.
A confirmation tone sounds, indicating
that the radio begins recording.
1 ) to enter menu mode.
2 y or z until
Voice Storage
3 ) to select
Voice Storage
4 y or z until
Record
5 ) to select
Record
6 y or z until
Voice Memo
7 ) to select
Recording
Note:
To Playback a Message using the
Preprogrammed Record/Playback Button
To stop recording at any time, press
(.
Press and release the preprogrammed
Record/Playback button.
• The first mesPlaying Msg XXX
sage plays, and
the display shows (XXX = the message number)
9 Press ( to stop recording.
VOICE STORAGE
8 Without pressing the PTT button, speak
clearly into the microphone to record your
memo. The radio records your memo
until the message slot is full or until you
press (.
–or–
Repeat steps 7 and 8 to store additional
messages.
RECORDED MESSAGE PLAYBACK
The CDM1550•LS allows you to list, select,
and Playback previously recorded incoming
call or voice memo messages. You can play
back a message by using the preprogrammed
Record/Playback button (see page 26) or your
radio’s menu.
Note:
To advance to the next message at any
time during Play back, press and release
the Record/Playback button again.
To exit/cancel Playback mode:
Press and release the preprogrammed
Playback Exit button (see page 26).
–or–
Press ( to stop Play Back.
Recorded message Playback cannot be
initiated while your radio is receiving. Also,
you don’t receive any incoming calls while
you play back messages.
Playing Msg XXX
81
English
VOICE STORAGE
To Playback a Message using the Menu
1 ) to enter menu mode.
2 y or z until
Voice Storage
3 ) to select
Voice Storage
4 y or z until
Playback
5 ) to select
Playback
6 y or z until
001 12:00A
Message #
Time Stamp
005
10 y or z anytime during playback to
advance to the next message.
82
Press and release the preprogrammed
Record/Playback button.
y or z to select the desired message.
Press and hold the preprogrammed
Delete Playback button to delete current
message.
( to stop deleting messages.
Duration (in seconds)
9 Press ) to play the selected message.
Messages must be deleted one at a time.
To Delete a Message using the
Preprogrammed Delete Playback Button
(see page 26)
005
8 y or z to select the desired message.
English
The CDM1550•LS+ radio allows you to delete
previously recorded incoming call or voice
memo messages. You can delete a message
using either the preprogrammed Delete
Playback button (see page 26) or your radio’s
menu.
Note:
7 ) to select
001 12:00A
RECORDED MESSAGE DELETE
To Delete a Message using the Menu
2 y or z until
Voice Storage
3 ) to select
Voice Storage
4 y or z until
Delete
5 ) to select
Delete
This feature allows you to transmit a recorded
message to another radio user.
To Transmit a Recorded Message
Press and hold the PTT button to initiate
the message transmission.
While holding down the PTT button,
press the preprogrammed Record/Playback button to select and play back the
desired recorded call or memo.
When finished transmitting your message, press the Record/Playback button again to stop transmitting.
6 y or z to select the desired message.
7 Press ) to delete the selected message.
8 y or z to select the another message to be deleted, then go to step 7.
VOICE STORAGE
1 ) to enter menu mode.
RECORDED MESSAGE
TRANSMISSION
–or–
Press ( to stop deleting messages.
83
English
VOICE STORAGE
ANSWER MODE
The Answer Mode feature allows radio callers
to leave recorded audio messages on your
radio.
Note:
This feature is available via the radio’s
menu and/or the radio or the DTMF microphone programmable button.
To Enable the Answer Mode Feature
1 ) to enter menu mode.
Alternate Msg?
4 ) to select
Greeting Msg?
The display shows:
Recording
5 Without pressing the PTT button, speak
clearly into the microphone to record your
memo. The radio records your greeting
until the message slot is full or until you
press (.
2 y or z until
Voice Storage
6 To exit or cancel recording, press (.
3 ) to select
Voice Storage
Voice Storage
With this feature enabled, the recorded
message is automatically transmitted
whenever your radio receives a call.
4 y or z until
Ans Mode On?
5 ) to select
Ans Mode On
To Record a Message
1 y or z until
Record Msg
2 ) to select
Greeting Msg?
84
English
3 y or z until
To Disable the Answer Mode Feature
VOICE STORAGE
1 ) to enter menu mode.
2 y or z until
Voice Storage
3 ) to select
Voice Storage
4 y or z until
Ans Mode Off?
5 ) to select
Ans Mode Off
85
English
VOICE STORAGE
Notes
86
English
AUDIO/TONE SETTINGS
You can customize the audio and tone feature
settings on your radio by:
1 ) to enter menu mode.
2 y or z until
Audio/Tones
3 ) to select
Audio/Tones
AUDIO/TONE
SETTINGS
4 y or z until you see the feature you
want to change (see the table on the next
page).
5 ) to select the feature. You see the
feature’s current setting.
6 y or z for available settings. (For
Name and Call Tone Tagging, see
page 56.)
7 ) to set the desired setting.
87
English
Audio/Tone Settings
AUDIO/TONE
SETTINGS
Feature
Settings
Alert Vol Lvl
Makes the volume level of the audio and alert tones independent. If turned on, it makes the alert tones follow the
settings in the CPS; if turned off, the alert tones follow the
setting of the volume knob.
Ind Alert Off
Ind Alert On
Tone Disable
Turns all alert and audio tones on or off.
Tones On
Tones Off
Name and Call
Tone Tagging ‡§
Assigns a specific ring tone when receiving a call from a
specific user (see page 56 for details).
Standard
Alert #1 – #7
Call Tone Tag ‡§
Assigns a specific tone when receiving a specific type of
radio call (see page 56 for details).
Standard
Alert #1 – #7
Escalert ‡
Increases the volume of the alarm tones when a radio
call is not answered.
Escalert On
Escalert Off
Companding
Provides the same audio quality for 12.5 kHz and for
25 kHz channels.
Compand On
Compand Off
‡
88
English
What it Does
LTR trunking operation only.
§
Conventional operation only.
UTILITIES
You can customize some of your radio’s feature
by:
1 ) to enter menu mode.
2 y or z until
Utilities
3 ) to select
Utilities
4 y or z until you see the feature you
want to change (see table on the next
page).
5 ) to select the feature. You see the
feature’s current setting.
6 y or z
for available settings.
UTILITIES
7 ) to select the desired setting.
89
English
Utilities Features
Feature
Settings
Power Level
Changes the power level of the radio to high, low (see
page 91).
Power High
Power Low
Clock
Sets the time, or turns the clock on or off (see page 92).
Clock On
Clock Off
Set Time
Reminder Alarm
Sets the alarm, or turns it on or off (see page 92).
Alarm On
Alarm Off
Set Time
Language
Selection § ‡
Selects the language to be shown on your radio’s displays.
English
Spanish
Portuguese
French
Software Ver #
In LTR trunked and conventional operation, displays the
radio’s software version number when you press ).
UTILITIES
In PassPort operation, displays the PassPort software
version number when you press ).
Note: The LTR and conventional software version number may
be different than the PassPort software version number.
§
90
English
What it Does
Conventional Operation only.
‡
LTR Trunked Operation only.
——
SETTING THE POWER LEVEL B
Each channel in your radio has a predefined
transmit power level that can be changed.
•
High power (S) allows you to reach a radio
that is farther away.
•
Low power (R) conserves the battery’s
charge.
Note:
•
•
Be aware that a message received
from a nearby radio might change
your radio’s power level to low. This
may cause radios that are farther
away not to receive your transmissions.
In PassPort mode, the power level is
predefined radio wide.
Do the following:
) to enter menu mode.
y or z until
Utilities
) to select
Utilities
y or z until
Power Level
) to select
Power Level
The display shows the current power level.
y or z until
Power High?
or until
Power Low?
) to confirm the selection.
UTILITIES
To set the power level:
Press the preprogrammed Power Level button
(see page 25) to toggle between low and high,
–or–
91
English
SETTING THE CLOCK/ALARM
To Set the Clock/Alarm
10 ) to save your changes.
1 ) to enter menu mode.
Utilities
11 ( to return to
3 ) to select
Set time?
–or– to return to
Reminder Alarm
4 y or z until
Clock
–or–
Clock
Reminder Alarm
–or–
5 ) to confirm your selection.
UTILITIES
Utilities
2 y or z until
or until
6 y or z until
Set time?
7 ) to select
Set time?
8 When a setting is blinking, you can
change it with y or z.
Hour (AM or
PM)
Minutes
Note:
3:05 PM
(AM/PM or 24 hr)
You cannot select “24 hr” for
Reminder Alarm
92
English
9 v or w to move to the previous or
next setting.
Hold down ( to exit menu mode.
DISPLAYING THE TIME
To Display the Time
1 ) to enter menu mode.
2 y or z until
Utilities
3 ) to select
Utilities
4 y or z until
Clock
5 ) to confirm your selection.
6 y or z until
Display Clock?
7 ) to select
Display Clock?
The radio displays
the time for a preprogrammed duration.
(LTR TRUNKED AND CONVENTIONAL
OPERATION ONLY)
To Select the Display Language
1 ) to enter menu mode.
2 y or z until
Utilities
3 ) to select
Utilities
4 y or z until
Language Select
5 ) to confirm your selection.
6 y or z until the desired language is
displayed.
7 ) to confirm your selection.
UTILITIES
8 ( to exit the menu.
SELECTING THE DISPLAY
LANGUAGE
8 ( to exit the menu.
93
English
UTILITIES
Notes
94
English
12_Warranty.fm Page 95 Monday, April 15, 2002 5:09 PM
WARRANTY
I. WHAT THIS WARRANTY COVERS AND
FOR HOW LONG:
MOTOROLA INC. (“MOTOROLA”) warrants the
MOTOROLA manufactured Communication
Products listed below (“Product”) against defects
in material and workmanship under normal use
and service for a period of time from the date of
purchase as scheduled below:
CDM1550•LS+ Mobile Units Two (2) Years
Product Accessories
One (1) Year
Motorola, at its option, will at no charge either
repair the Product (with new or reconditioned
parts), replace it (with a new or reconditioned
Product), or refund the purchase price of the
Product during the warranty period provided it is
returned in accordance with the terms of this
warranty. Replaced parts or boards are warranted
WARRANTY
LIMITED WARRANTY
MOTOROLA COMMUNICATION
PRODUCTS
for the balance of the original applicable warranty
period. All replaced parts of Product shall become
the property of MOTOROLA.
This express limited warranty is extended by
MOTOROLA to the original end user purchaser
only and is not assignable or transferable to any
other party. This is the complete warranty for the
Product manufactured by MOTOROLA.
MOTOROLA assumes no obligations or liability
for additions or modifications to this warranty
unless made in writing and signed by an officer
of MOTOROLA. Unless made in a separate
agreement between MOTOROLA and the
original end user purchaser, MOTOROLA does
not warrant the installation, maintenance or
service of the Product.
MOTOROLA cannot be responsible in any way
for any ancillary equipment not furnished by
MOTOROLA which is attached to or used in
connection with the Product, or for operation of
the Product with any ancillary equipment, and all
such equipment is expressly excluded from this
warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims
liability for range, coverage, or operation of the
system as a whole under this warranty.
95
English
12_Warranty.fm Page 96 Monday, April 15, 2002 5:09 PM
II. GENERAL PROVISIONS:
WARRANTY
This warranty sets forth the full extent of
MOTOROLA'S responsibilities regarding the
Product. Repair, replacement or refund of the
purchase price, at MOTOROLA’s option, is the
exclusive remedy. THIS WARRANTY IS GIVEN
IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY. IN NO EVENT SHALL MOTOROLA
BE LIABLE FOR DAMAGES IN EXCESS OF
THE PURCHASE PRICE OF THE PRODUCT,
FOR ANY LOSS OF USE, LOSS OF TIME,
INCONVENIENCE, COMMERCIAL LOSS, LOST
PROFITS OR SAVINGS OR OTHER
INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE SUCH PRODUCT, TO THE
FULL EXTENT SUCH MAY BE DISCLAIMED BY
LAW.
III. STATE LAW RIGHTS:
SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL
96
English
OR CONSEQUENTIAL DAMAGES OR
LIMITATION ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE
LIMITATION OR EXCLUSIONS MAY NOT
APPLY.
This warranty gives specific legal rights, and there
may be other rights which may vary from state to
state.
IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the
date of purchase and Product item serial
number) in order to receive warranty service and,
also, deliver or send the Product item,
transportation and insurance prepaid, to an
authorized warranty service location. Warranty
service will be provided by Motorola through one
of its authorized warranty service locations. If you
first contact the company which sold you the
Product (e.g., dealer or communication service
provider), it can facilitate your obtaining warranty
service. You can also call Motorola at 1-800-9272744 US/Canada.
12_Warranty.fm Page 97 Monday, April 15, 2002 5:09 PM
V. WHAT THIS WARRANTY DOES NOT
COVER:
B)
C)
D)
E)
F)
G)
Defects or damage resulting from use of the
Product in other than its normal and
customary manner.
Defects or damage from misuse, accident,
water, or neglect.
Defects or damage from improper testing,
operation, maintenance, installation,
alteration, modification, or adjustment.
Breakage or damage to antennas unless
caused directly by defects in material
workmanship.
A Product subjected to unauthorized
Product modifications, disassembles or
repairs (including, without limitation, the
addition to the Product of non-Motorola
supplied equipment) which adversely affect
performance of the Product or interfere with
Motorola's normal warranty inspection and
testing of the Product to verify any warranty
claim.
Product which has had the serial number
removed or made illegible.
Rechargeable batteries if:
1) any of the seals on the battery
enclosure of cells are broken or show
evidence of tampering.
the damage or defect is caused by
charging or using the battery in
equipment or service other than the
Product for which it is specified.
H) Freight costs to the repair depot.
I) A Product which, due to illegal or
unauthorized alteration of the software/
firmware in the Product, does not function in
accordance with MOTOROLA’s published
specifications or the FCC type acceptance
labeling in effect for the Product at the time
the Product was initially distributed from
MOTOROLA.
J) Scratches or other cosmetic damage to
Product surfaces that does not affect the
operation of the Product.
K) Normal and customary wear and tear.
WARRANTY
A)
2)
VI. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any
suit brought against the end user purchaser to
the extent that it is based on a claim that the
Product or parts infringe a United States patent,
and MOTOROLA will pay those costs and
damages finally awarded against the end user
purchaser in any such suit which are attributable
to any such claim, but such defense and
payments are conditioned on the following:
97
English
12_Warranty.fm Page 98 Monday, April 15, 2002 5:09 PM
WARRANTY
A) that MOTOROLA will be notified promptly in
writing by such purchaser of any notice of
such claim;
B) that MOTOROLA will have sole control of the
defense of such suit and all negotiations for
its settlement or compromise; and
C) should the Product or parts become, or in
MOTOROLA’s opinion be likely to become,
the subject of a claim of infringement of a
United States patent, that such purchaser
will permit MOTOROLA, at its option and
expense, either to procure for such
purchaser the right to continue using the
Product or parts or to replace or modify the
same so that it becomes non-infringing or to
grant such purchaser a credit for the Product
or parts as depreciated and accept its
return. The depreciation will be an equal
amount per year over the lifetime of the
Product or parts as established by
MOTOROLA.
MOTOROLA will have no liability with respect to
any claim of patent infringement which is based
upon the combination of the Product or parts
furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will
MOTOROLA have any liability for the use of
ancillary equipment or software not furnished by
MOTOROLA which is attached to or used in
98
English
connection with the Product. The foregoing
states the entire liability of MOTOROLA with
respect to infringement of patents by the Product
or any parts thereof.
Laws in the United States and other countries
preserve for MOTOROLA certain exclusive rights
for copyrighted MOTOROLA software such as
the exclusive rights to reproduce in copies and
distribute copies of such Motorola software.
MOTOROLA software may be used in only the
Product in which the software was originally
embodied and such software in such Product
may not be replaced, copied, distributed,
modified in any way, or used to produce any
derivative thereof. No other use including, without
limitation, alteration, modification, reproduction,
distribution, or reverse engineering of such
MOTOROLA software or exercise of rights in
such MOTOROLA software is permitted. No
license is granted by implication, estoppel or
otherwise under MOTOROLA patent rights or
copyrights.
VII. GOVERNING LAW:
This Warranty is governed by the laws of the
State of Illinois, USA.
13_Accessory.fm Page 99 Monday, April 15, 2002 5:09 PM
ACCESSORIES
Motorola offers a number of accessories to
enhance the productivity of your two-way radio.
Many of the available accessories are listed
below. For a complete list, see your Motorola
dealer.
MICROPHONES
EXCHANGEABLE BUTTON KITS
Note: Other individual exchangeable buttons
are available through AAD. Please see
Basic Service Manual for button
numbers.
Standard Button Kit: MON, SCAN, CALL,
HOME, PHONE
RLN5324_
Standard Button Kit: MON, SCAN, CALL,
HOME, PHONE, ROAM, SITE
AARMN4025_ Standard Compact Microphone
AARMN4026_ Enhanced DTMF Keypad Microphone
AARMN4038_ Heavy Duty Microphone
MOUNTING KITS
AAREX4617_ Telephone Style Handset with Hang-Up
Cup
GLN7324_R
Standard Low Profile Bracket (VHF/UHF)
GLN7317_
High Profile Mounting Bracket (VHF/UHF)
RLN4779_
Key Lock Mounting Bracket (VHF/UHF)
RLN4781_
Direct in Dashboard Mounting Kit (VHF/
UHF)
HLN8097_
Removable Slide Mount Tray Package
(VHF/UHF - A maximum of two external
accessory wires can be attached to the
slide tray)
HLN9073_R
Microphone Hang-Up Clip (all
microphones)
HANDSFREE KITS
AARMN4027_ Visor Mounted Microphone
RLN4856_
Footswitch PTT
RLN4857_
Pushbutton PTT
RLN4858_
Gooseneck PTT
ACCESSORIES
RLN4831_
99
English
13_Accessory.fm Page 100 Monday, April 15, 2002 5:09 PM
REMOTE MOUNTS
RLN4802_
Remote Mount Kit - CDM1250 and
CDM1550 models (requires HKN4192
power cable)
RKN4077_
Remote Mount Cable, 3 meter length
RKN4078_
Remote Mount Cable, 5 meter length
RKN4079_
Remote Mount Cable, 7 meter length
HLN9457_R
ANTENNAS
HKAD4001_
220 MHz, 1/4-Wave Roof Mount
HAF4012_
Mini-U 746-794 MHz, 1/4-Wave Roof
Mount
ACCESSORIES
EXTERNAL SPEAKERS
RSN4001_
13 Watt External Loudspeaker
HSN8145_
7.5 Watt External Speaker - for Receiver
Audio
SERVICE AIDS AND
PROGRAMMING EQUIPMENT
H5177
INSTALLATION AND ALARM KITS
HKN4137_
Standard 12V 10” Power Cable to Battery
(VHF/UHF)
HKN4192_
12V 20 Ft. Power Cable to Battery (VHF/
UHF)
GKN6272_
External Alarm Relay and Cable
RLN4836_
Emergency Footswitch
HKN9327_
Ignition Switch Cable
HKN9557_R
PL259/Mini-U Antenna Adapter - 8” Cable
Hardware Kit for use with the Expanded
Accessory Connector (includes 16
connector pins, (five) 8” wires with pins
attached and an extra housing)
Portable/Mobile Programming Software
(CPS) 3 Year Subscription Package Includes CPS CD ROM Software:
HVN9025 for the HT/EX500/CDM/MTX.LS
Series and HVN9067 for MTX Series
Privacy Plus. Includes HT/MTX Series
Programming/Test Cable (AARKN4074).
Also is compatible with RLN4460 used for
radio testing. (HVN9025 is compatible with
Windows® 95/98/2000/Millennium (ME)/
Windows NT®. HVN9067 is compatible
with Windows® 95/98/Windows NT®).
Note:
100
English
Software requires a license
agreement and is not intended for
resale.
13_Accessory.fm Page 101 Monday, April 15, 2002 5:09 PM
AARKN4081_ Programming Cable with Internal RIB
(direct connection from computer to radio
microphone connector)
CONTROL STATION KITS
HMN3000_
Desk Microphone (Black)
AARKN4083_ Programming Cable (allows radio
programming via rear accessory
connector)
GLN7326_
Desktop Tray with Speaker
3080070N01 Programming Cable (connection from RIB
to radio)
3080369B72
9 Pin PC to Radio Interface Box Cable
(IBM AT or compatible)
RLN4460_
Test Box for Portables and Mobiles
Radio Interface Box (RIB)
0180357A57
Wall Mounted Power Supply, 120V - used
with RLN4008
RLN4853_
10 to 20 Pin Adapter
MANUALS
6864110R14
CDM1550•LS+ 220/700 MHz Detailed
Service Manual
6864110R16
CDM1550•LS+ 200/700 MHz Basic
Service Manual
6881092C58 Installation Manual (English)
Desktop Tray without Speaker
HKN9088_
Mobile Mini-U Antenna Adapter - 8 Ft.
Cable
HPN4002_R
Power Supply and Cable (1-25 Watt
Models)
HPN4001_R
Power Supply and Cable (25-60 Watt
Models)
MOBILE DATA UNITS SECTION
Terminals:
RDN7365_
Mobile Status Terminal - Mobile
messaging device equipped with a data
modem. This will allow a mobile user to
report “status messaging” back to the
dispatcher by activating one of the status
keys.
RDN7366_
Mobile Status Terminal with GPS - Mobile
status terminal equipped with an
Automatic Vehicle Location (AVL) device
compatible with Global Positioning System
(GPS).
ACCESSORIES
RLN4008_
GLN7318_
101
English
13_Accessory.fm Page 102 Monday, April 15, 2002 5:09 PM
RDN7367_
ACCESSORIES
RDN7368_
Mobile Display Terminal - Mobile
messaging device equipped with a data
modem. This unit features a 4x40 backlit
LCD display and the keypad allows users
to send information to the dispatcher in
response to base instructions.
RDN7369_
Standalone Modem/GPS - Cost efficient
Automatic Vehicle Location (AVL) device
compatible with Global Positioning System
(GPS).
RDN7738_
Serial Breakout Unit (used in multiple
applications that allow up to eight base
modems to be connected).
RDN7740_
15 Ft. Flying Cable (same as regular
interface cable, but omits connectors).
Peripherals:
RDN7371_
Credit Card Reader - Card reader is used
to perform automatic online credit card
authorization transaction. Used with
RDN7379 (credit card software).
RDN7373_
Mobile Printer - The mobile printer
provides users with a hard copy of the
information transmitted from the base
dispatch location.
Global Positioning System (GPS) Antennas:
Antenna is required with purchase of any GPS
unit
RDN7372_
Fixed Mount GPS Active Antenna
RDN7375_
Magnetic Mount GPS Active Antenna
Radio Interface Cables: One radio interface
cable is required with purchase of each
hardware device
Software:
RDN7370_
3 Ft. Interface Cable with 16 Pin
Connector
RDN7374_
Programming Software - Used for mobile
data units.
RDN7376_
15 Ft. Interface Cable with 16 Pin
Connector
RDN7377_
Regional Map Software - Will allow up to
10 selected US counties.
RDN7739_
3 Ft. Flying Cable (same as regular
interface cable, but omits connectors).
102
English
Mobile Display Terminal with GPS - Mobile
display terminal equipped with an
Automatic Vehicle Location (AVL) device
compatible with Global Positioning system
(GPS).
13_Accessory.fm Page 103 Monday, April 15, 2002 5:09 PM
RDN7378_
RDN7379_
AVL Messaging Status Software Mapping software that provides the user
with Automatic Vehicle Location to track
vehicles along with message dispatch and
status tracking capability.
PUBLIC ADDRESS
HKN9323_
8 Ft. Public Address Speaker Cable
Credit Card Software - Used with
RDN7371 (credit card reader).
HKN9324_
15 Ft. Public Address Speaker Cable (one
cable per speaker)
HSN1000_R
6 Watt Amplified External Speaker
RLN5288_
Public Address Kit (includes interface
cable
Miscellaneous:
RDN7364_
RETROFIT KIT
6686119B01
Dismantling Tool
ACCESSORIES
RDN7380_
Radio Channel Card - A radio channel
controller and modem that interface with
the base radio. Required with every radio
channel or wireless circuit used within the
system.
Mobile Programming Hardware
103
English
13_Accessory.fm Page 104 Monday, April 15, 2002 5:09 PM
ACCESSORIES
Notes:
104
English
Selecting a Trunked Zone and Talkgroup
1.
2.
v or w to select desired trunked zone.
y or z until you see desired preprogrammed talkgroup on the display.
CDM1550•LS+ Quick Reference Card
Sending a Trunked Call
1.
2.
Press PTT button. If trunked system access was successful — Red LED = steady;
if unsuccessful —LED = flashing; red-low pitched tone sounds.
Speak clearly into microphone. Release PTT button to listen.
Record the functions for your radio’s programmable buttons in the table provided below. For further
information, see pages 24 and 25 in this User Guide.
Red/Yellow/Green
LED Indicators
LCD Screen
Initial PassPort System Registration
PASSPORT
Upon power up, PassPort alias appears on the LCD.
TLKGRP ALIAS
The selected talkgroup alias appears on the LCD.
SEARCHING
May appear if a PassPort site cannot be quickly
located.
REG SITE XXX
Appears indicating successful PassPort registration
(XXX = PassPort site on which you are registered).
TLKGRP ALIAS
Selected talkgroup alias appears and remains on the
display upon successful registration.
Selecting a Conventional Zone and Channel
1.
2.
v or w to select desired conventional zone.
y or z until you see desired conventional channel on the display.
Sending a Conventional Call
•
Press PTT button and speak clearly into microphone. LED = steady while call is being
sent. Release PTT button to listen.
Receiving a Trunked or Conventional Call
•
v or w, then y or z to desired talkgroup or channel. Make sure PTT button
is released. When a call is received, the LED flashes.
Making a Selective Call (LTR Trunked and Conventional Operation only)
1.
2.
3.
From Selective Call menu, select or enter desired radio ID number.
Press PTT button to send the call. The radio sounds a continuous tone.
Press PTT button and talk; release PTT button to listen.
Receiving a Selective Call (LTR Trunked and Conventional Operation only)
•
When a Selective Call is received, the radio displays F symbol and name or ID of calling
radio; the yellow LED flashes. Press PTT button to answer.
Talkgroup/Channel Selector/
Menu Navigation Buttons
(Up/Down)
Programmable
Menu Enter/Select
Button 3 (P3)
Menu Exit/Escape
(Interchangeable)
Button
Button
On/Off/Volume
Control Knob
Microphone
Jack
Programmable
Button 1 (P1)
(Interchangeable)
Button
Programmable
Button 2 (P2)
(Interchangeable)
Feature
Short Press
Zone Selector/
Editing Buttons
(Left/Right)
Long Press
Programmable
Button 4 (P4)
(Interchangeable)
Hold Down
Page
Menu Navigation Chart
* — Available in PassPort trunked zones only
(Refer to Menu Navigation guidelines—
lower, left-hand corner of this page)
Radio Call
Rptr/
Talkarnd§
(p. 34)
(LTR) All
Group
Scan‡(p. 62)
PP Group
Scan*
(p. 60)
on/off
repeater mode/
talkarnd mode
‡ — Available in LTR trunked zones only
LTR /Con
System
Scan
Voice
Storage
§ — Available in conventional zones only
Program
Lists
Phone
(p. 69)
on/off
on/off
Delete
(p. 82)
Selective
Call‡§
Call Alert
‡§
Radio
Check‡§
select/enter
ID
select/enter
ID
select/enter
ID
Record
(page 78)
Playback
(p. 81)
all incoming
Menu Navigation
voice
memo
( to return to previous menu level
—or—
Hold down ( to exit menu mode
) to select sub-menu item
on/off
high/low/
auto (‡ and §)
on/off
on/off/set time
Call‡§
Tone Tag
Reminder
Alarm
standard/alert
#1 - #7
on/off/set time
Scan List
(p. 64)
edit
priority
(‡ and §)
y or z to scroll through sub-list
Power Level
add/delete/
edit entry
add/delete
entry
) to select menu item
Alert Vol Lvl
Tone
Disable
edit entry
y or z to scroll through the list
Phone List
(p. 73)
RadioCall
List
(p. 55)
) to enter menu mode
Utilities
(p. 89)
Audio/Tones
(p. 87)
Escalert‡§
on/off
Clock
Language
Selection‡§
Companding
English/French/
Portuguese/
Spanish
on/off
Software
Version#
6864110R13-O_cvr.qxd
4/15/2002
3:46 PM
Page 1
Motorola, The Stylized M logo, Intelligence Everywhere, Professional Radio - As Dedicated As You Are, CDM Series,
CDM1550•LS+, and Call Alert are trademarks of Motorola, Inc.
LTR is a mark of E.F. Johnson Company.
PassPort is a registered trademark of Trident Datacomm Technologies, Inc.
© 2002 Motorola, Inc. All rights reserved. Printed in U.S.A.
*6864110R13-O*
6864110R13-O
CDM1550•LS+ User Guide
Professional Radio - As Dedicated As You Are™

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2002:04:15 20:44:30Z
Modify Date                     : 2002:05:03 11:40:56-04:00
Page Count                      : 108
Creation Date                   : 2002:04:15 20:44:30Z
Mod Date                        : 2002:05:03 11:40:56-04:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : ckc015
Metadata Date                   : 2002:05:03 11:40:56-04:00
Creator                         : ckc015
Title                           : 6864110R13-O_cvr.qxd
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ABZ99FT3081

Navigation menu