Motorola Solutions 99FT4086 UHF 4W PORTABLE RADIO User Manual MOTOTRBO User Guide

Motorola Solutions, Inc. UHF 4W PORTABLE RADIO MOTOTRBO User Guide

1. MANUAL
2. USERS MANUAL

MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	1692171
Application ID	Hde4LAwKHbDUy5BDYrsr2A==
Document Description	MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	280.75kB (3509362 bits)
Date Submitted	2012-05-08 00:00:00
Date Available	2012-05-09 00:00:00
Creation Date	2011-08-10 18:25:25
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2011-08-10 18:29:14
Document Title	MOTOTRBO User Guide
Document Creator	FrameMaker 8.0
Document Author:	Motorola Solutions (GCD Penang)

MOTOTRBO XPRTM 7550
Display Portable
User Guide
68009502001-A
Contents
This User Guide contains all the information you need to
use the MOTOTRBO XPR Series Digital Portable
Radios.
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . 7
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Important Safety Information . . . . . . . . . . . . . . . . . 10
Product Safety and RF Exposure Compliance . . 10
Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Computer Software Copyrights . . . . . . . . . . . . . . . 11
Handling Precautions . . . . . . . . . . . . . . . . . . . . . . . 12
Contents
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . 1
What Your Dealer/System Administrator
Can Tell You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Preparing Your Radio for Use . . . . . . . . . . . . . . . . .
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . .
Attaching the Battery . . . . . . . . . . . . . . . . . . . . . . . .
Attaching the Antenna . . . . . . . . . . . . . . . . . . . . . . .
Attaching the Belt Clip . . . . . . . . . . . . . . . . . . . . . . .
English
Attaching the Universal Connector Cover (Dust Cover)
Powering Up the Radio . . . . . . . . . . . . . . . . . . . . . . 5
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . 6
Identifying Radio Controls . . . . . . . . . . . . . . . . . . . . 6
Radio Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . 8
Assignable Radio Functions . . . . . . . . . . . . . . . . . 8
Assignable Settings or Utility Functions . . . . . . . 10
Using the 4-Way Navigation Button . . . . . . . . . . . . 10
Accessing the Programmed Functions . . . . . . . . . 11
Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . 13
Switching Between Conventional Analog and Digital
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Capacity Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Identifying Status Indicators . . . . . . . . . . . . . . . . .
Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Advanced Menu Icons . . . . . . . . . . . . . . . . . . . . . .
Mini Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . .
Sent Item Icons . . . . . . . . . . . . . . . . . . . . . . . . . . .
LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
15
17
17
18
18
19
20
Permanent Monitor . . . . . . . . . . . . . . . . . . . . . . . 35
Making and Receiving Calls . . . . . . . . . . . . . . . . . . 21
Selecting a Site . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Selecting a Radio Channel, Subscriber ID,
or Group ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Receiving and Responding to a Radio Call . . . . . . 23
Receiving and Responding to a Group Call . . . . . 23
Receiving and Responding to a Private Call . . . 24
Receiving an All Call . . . . . . . . . . . . . . . . . . . . . . 25
Receiving and Responding to a Selective Call . . 26
Making a Radio Call . . . . . . . . . . . . . . . . . . . . . . . . 27
Making a Call with the Channel Selector Knob . . 27
Making a Group Call . . . . . . . . . . . . . . . . . . . . . 27
Making a Private Call . . . . . . . . . . . . . . . . . . . . 28
Making an All Call . . . . . . . . . . . . . . . . . . . . . . . 29
Making a Selective Call . . . . . . . . . . . . . . . . . . 30
Making a Group or Private Call with the One Touch
Access Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Making a Group, Private or All Call with the
Programmable Number Key . . . . . . . . . . . . . . . . 32
Stopping a Radio Call . . . . . . . . . . . . . . . . . . . . . . 33
Talkaround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Monitoring Features . . . . . . . . . . . . . . . . . . . . . . . . 34
Monitoring a Channel . . . . . . . . . . . . . . . . . . . . . . 34
Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . 36
Radio Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Sending a Radio Check . . . . . . . . . . . . . . . . . . . . 37
Remote Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Initiating Remote Monitor . . . . . . . . . . . . . . . . . . . 38
Stopping Remote Monitor . . . . . . . . . . . . . . . . . . 40
Scan Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Viewing an Entry in the Scan List . . . . . . . . . . . . 40
Viewing an Entry in the Scan List by Alias Search 41
Editing the Scan List . . . . . . . . . . . . . . . . . . . . . . 41
Adding a New Entry to the Scan List . . . . . . . . 41
Deleting an Entry from the Scan List . . . . . . . . 42
Setting and Editing Priority for an Entry in the Scan
List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Starting and Stopping Scan . . . . . . . . . . . . . . . . . 45
Responding to a Transmission During a Scan . . 45
Deleting a Nuisance Channel . . . . . . . . . . . . . . . 46
Restoring a Nuisance Channel . . . . . . . . . . . . . . 46
Vote Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Contacts Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Making a Group Call from Contacts . . . . . . . . . . . 48
Making a Private Call from Contacts . . . . . . . . . 49
Making a Call by Alias Search . . . . . . . . . . . . . . 50
Contents
Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
English
Contents
Assigning an Entry to a Programmable
Number Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Removing the Association between Entry and
Programmable Number Key . . . . . . . . . . . . . . . 52
Setting Default Contact . . . . . . . . . . . . . . . . . . . 53
Call Indicator Settings . . . . . . . . . . . . . . . . . . . . . . 53
Activating and Deactivating Call Ringers for Call Alert
53
Activating and Deactivating Call Ringers for Private
Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Activating and Deactivating Call Ringers for Selective
Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Activating and Deactivating Call Ringers for Text
Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Activating and Deactivating Call Ringers for
Telemetry Status with Text . . . . . . . . . . . . . . . . 55
Assigning Ring Styles . . . . . . . . . . . . . . . . . . . . 56
Escalating Alarm Tone Volume . . . . . . . . . . . . . . 56
Call Log Features . . . . . . . . . . . . . . . . . . . . . . . . . 57
Viewing Recent Calls . . . . . . . . . . . . . . . . . . . . . 57
Storing an Alias or ID from a Call List . . . . . . . . . 57
Deleting a Call from a Call List . . . . . . . . . . . . . . 58
Viewing Details from a Call List . . . . . . . . . . . . . 58
Call Alert Operation . . . . . . . . . . . . . . . . . . . . . . . . 59
Receiving and Responding to a Call Alert . . . . . 59
English
Making a Call Alert from the Contacts List . . . . . 59
Making a Call Alert with the One Touch Access Button
60
Emergency Operation . . . . . . . . . . . . . . . . . . . . . . 60
Receiving an Emergency Alarm . . . . . . . . . . . . . 61
Responding to an Emergency Alarm . . . . . . . . . 62
Sending an Emergency Alarm . . . . . . . . . . . . . . 63
Sending an Emergency Alarm with Call . . . . . . . 63
Sending an Emergency Alarm with Voice to Follow
64
Reinitiating an Emergency Mode . . . . . . . . . . . . 65
Exiting Emergency Mode . . . . . . . . . . . . . . . . . . 66
Text Message Features . . . . . . . . . . . . . . . . . . . . 67
Writing and Sending a Text Message . . . . . . . . . 67
Sending a Quick Text Message . . . . . . . . . . . . . 68
Sending a Quick Text Message with the One Touch
Access Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Accessing the Drafts Folder . . . . . . . . . . . . . . . . 69
Viewing a Saved Text Message . . . . . . . . . . . 70
Editing and Sending a Saved Text Message . . 70
Deleting a Saved Text Message from Drafts . . 71
Managing Fail-to-Send Text Messages . . . . . . . 71
Resending a Text Message . . . . . . . . . . . . . . . 71
Forwarding a Text Message . . . . . . . . . . . . . . 72
Editing a Text Message . . . . . . . . . . . . . . . . . . 72
Stopping an Automatic Site Search . . . . . . . . . . . 86
Starting a Manual Site Search . . . . . . . . . . . . . . . 87
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Radio Disable . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Radio Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Lone Worker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Password Lock Features . . . . . . . . . . . . . . . . . . . . 90
Accessing the Radio from Password . . . . . . . . . . 90
Unlocking the Radio from Locked State . . . . . . . 90
Turning the Password Lock On or Off . . . . . . . . . 91
Changing the Password . . . . . . . . . . . . . . . . . . . . 92
Bluetooth Operation . . . . . . . . . . . . . . . . . . . . . . . . 93
Finding and Connecting to a Bluetooth Device . . 93
Disconnecting from a Bluetooth Device . . . . . . . . 94
Switching Audio Route . . . . . . . . . . . . . . . . . . . . . 95
Viewing Device Details . . . . . . . . . . . . . . . . . . . . 95
Editing Device Name . . . . . . . . . . . . . . . . . . . . . . 95
Notification List . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Accessing the Notification List . . . . . . . . . . . . . . . 96
Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Turning the Radio Tones/Alerts On or Off . . . . . . 96
Turning Keypad Tones On or Off . . . . . . . . . . . . . 97
Setting the Tone Alert Volume Offset Level . . . . 97
Turning the Talk Permit Tone On or Off . . . . . . . 98
Setting the Power Level . . . . . . . . . . . . . . . . . . . . 98
Contents
Managing Sent Text Messages . . . . . . . . . . . . . . 73
Viewing a Sent Text Message . . . . . . . . . . . . . 74
Sending a Sent Text Message . . . . . . . . . . . . . 74
Deleting All Sent Text Messages from Sent Items
75
Receiving a Text Message . . . . . . . . . . . . . . . . . 76
Reading a Text Message . . . . . . . . . . . . . . . . . . . 76
Managing Received Text Messages . . . . . . . . . . 77
Viewing a Text Message from the Inbox . . . . . 77
Viewing a Telemetry Status Text Message from the
Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Replying to a Text Message from the Inbox . . . 78
Deleting a Text Message from the Inbox . . . . . 79
Deleting All Text Messages from the Inbox . . . 79
Analog Message Encode . . . . . . . . . . . . . . . . . . . . 80
Sending MDC Message Encode to Dispatcher . . 80
Sending 5-Tone Message Encode to Contact . . . 80
Analog Status Update . . . . . . . . . . . . . . . . . . . . . . 81
Sending Status Update to Predefined Contact . . 81
Viewing 5-Tone Status Details . . . . . . . . . . . . . . . 81
Editing 5-Tone Status Details . . . . . . . . . . . . . . . 81
Privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Dual Tone Multi Frequency (DTMF) . . . . . . . . . . . . 84
IP Site Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Starting an Automatic Site Search . . . . . . . . . . . . 85
English
Contents
English
Changing the Display Mode . . . . . . . . . . . . . . . . 99
Adjusting the Display Brightness . . . . . . . . . . . . 99
Controlling the Display Backlight . . . . . . . . . . . 100
Setting the Squelch Level . . . . . . . . . . . . . . . . 100
Turning the Introduction Screen On or Off . . . . 101
Locking and Unlocking the Keypad . . . . . . . . . . 101
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Turning the LED Indicator On or Off . . . . . . . . . 102
Turning the Voice Operating Transmission (VOX)
Feature On or Off . . . . . . . . . . . . . . . . . . . . . . . 103
Turning the Option Board Feature(s) On or Off 104
Identifying Cable Type . . . . . . . . . . . . . . . . . . . 104
Voice Announcement . . . . . . . . . . . . . . . . . . . . 104
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . 105
Menu Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Analog Mic AGC . . . . . . . . . . . . . . . . . . . . . . . . 106
Digital Mic AGC . . . . . . . . . . . . . . . . . . . . . . . . . 106
Intelligent Audio . . . . . . . . . . . . . . . . . . . . . . . . 107
GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Accessing General Radio Information . . . . . . . 108
Accessing the Battery Information . . . . . . . . . 108
Checking the Radio Alias and ID . . . . . . . . . 108
Checking the Firmware Version and Codeplug Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Checking the GPS Information . . . . . . . . . . . 109
Front Panel Programming (FPP) . . . . . . . . . . . . . 110
Entering FPP Mode . . . . . . . . . . . . . . . . . . . . . . 110
Editing FPP Mode Parameters . . . . . . . . . . . . . 110
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Carry Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Headsets and Headset Accessories . . . . . . . . . .
Earbuds and Earpieces . . . . . . . . . . . . . . . . . . . .
Remote Speaker Microphones . . . . . . . . . . . . . . .
Surveillance Accessories . . . . . . . . . . . . . . . . . . .
Miscellaneous Accessories . . . . . . . . . . . . . . . . .
111
111
111
112
112
112
112
112
112
113
Batteries and Chargers Warranty . . . . . . . . . . . . 114
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Declaration of Conformity
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party
Name: Motorola Solutions, Inc.
Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A.
Phone Number: 1-800-927-2744
Declaration of Conformity
This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below.
Hereby declares that the product:
Model Name: XPR 7550
conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)
Class B Digital Device
As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
English
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
Declaration of Conformity
• Increase the separation between the equipment and receiver.
English
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Notes
Notes
English
Important Safety Information
Software Version
Product Safety and RF Exposure Compliance
All the features described in the following sections are
supported by the radio's software version R02.00.00.
Important Safety Information
Before using this product, read the operating
instructions for safe usage contained in the
Product Safety and RF Exposure booklet
enclosed with your radio.
ATTENTION!
This radio is restricted to occupational use only to
satisfy FCC RF energy exposure requirements.
Before using this product, read the RF energy awareness
information and operating instructions in the Product
Safety and RF Exposure booklet enclosed with your radio
(Motorola Publication part number 6881095C98) to
ensure compliance with RF energy exposure limits.
For a list of Motorola-approved antennas, batteries, and
other accessories, visit the following website:
http://www.motorolasolutions.com/governmentandenterprise
10
English
See Checking the Firmware Version and Codeplug
Version on page 109 to determine your radio's software
version.
Check with your dealer or system administrator
for more details of all the features supported.
Computer Software Copyrights
This voice coding Technology is licensed solely for use
within this Communications Equipment. The user of this
Technology is explicitly prohibited from attempting to
decompile, reverse engineer, or disassemble the Object
Code, or in any other way convert the Object Code into a
human-readable form.
U.S. Pat. Nos. #5,870,405, #5,826,222, #5,754,974,
#5,701,390, #5,715,365, #5,649,050, #5,630,011,
#5,581,656, #5,517,511, #5,491,772, #5,247,579,
#5,226,084 and #5,195,166.
Computer Software Copyrights
The Motorola products described in this manual may
include copyrighted Motorola computer programs stored
in semiconductor memories or other media. Laws in the
United States and other countries preserve for Motorola
certain exclusive rights for copyrighted computer
programs including, but not limited to, the exclusive right
to copy or reproduce in any form the copyrighted
computer program. Accordingly, any copyrighted
Motorola computer programs contained in the Motorola
products described in this manual may not be copied,
reproduced, modified, reverse-engineered, or distributed
in any manner without the express written permission of
Motorola. Furthermore, the purchase of Motorola
products shall not be deemed to grant either directly or by
implication, estoppel, or otherwise, any license under the
copyrights, patents or patent applications of Motorola,
except for the normal non-exclusive license to use that
arises by operation of law in the sale of a product.
The AMBE+2TM voice coding Technology embodied in
this product is protected by intellectual property rights
including patent rights, copyrights and trade secrets of
Digital Voice Systems, Inc.
11
English
Handling Precautions
The MOTOTRBO Series Digital Portable radio meets
IP57 specifications, allowing the radio to withstand
adverse field conditions such as being submersed in
water.
• If the radio has been submersed in water, shake the
radio well to remove any water that may be trapped
inside the speaker grille and microphone port. Trapped
water could cause decreased audio performance.
Handling Precautions
• If the radio’s battery contact area has been exposed to
water, clean and dry battery contacts on both the radio
and the battery before attaching the battery to the
radio. The residual water could short-circuit the radio.
• If the radio has been submersed in a corrosive
substance (e.g. saltwater), rinse the radio and battery
in fresh water then dry the radio and battery.
• To clean the exterior surfaces of the radio, use a diluted
solution of mild dishwashing detergent and fresh water
(i.e. one teaspoon of detergent to one gallon of water).
12
English
• Never poke the vent (hole) located on the radio chassis
below the battery contact. This vent allows for pressure
equalization in the radio. Doing so may create a leak
path into the radio and the radio’s submersibility may
be lost.
• Never obstruct or cover the vent, even with a label.
• Ensure that no oily substances come in contact with the
vent.
• The radio with antenna attached properly is designed to
be submersible to a maximum depth of 1 meter (3.28
feet) and a maximum submersion time of 30 minutes.
Exceeding either maximum limit or use without antenna
may result in damage to the radio.
• When cleaning the radio, do not use a high pressure jet
spray on the radio as this will exceed the 1 meter depth
pressure and may cause water to leak into the radio.
Do not disassemble the radio. This could
damage radio seals and result in leak paths into
the radio. Radio maintenance should only be
done in service depot that is equipped to test
and replace the seal on the radio.
Notes
Notes
13
English
Notes
14
English
Getting Started
How to Use This Guide
This User Guide covers the basic operation of the MOTOTRBO
Portables.
However, your dealer or system administrator may have
customized your radio for your specific needs. Check with your
dealer or system administrator for more information.
Throughout this publication, the icons below are used to
indicate features supported in either the conventional Analog
mode or conventional Digital mode:
Selected features are also available on the single-site trunking
mode, Capacity Plus. See Capacity Plus on page 14 for more
information.
What Your Dealer/System Administrator
Can Tell You
You can consult your dealer or system administrator about the
following:
Getting Started
Take a moment to review the following:
How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . page 1
What Your Dealer/System Administrator
Can Tell You. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1
For features that are available in both conventional Analog and
Digital modes, no icon is shown.
• Is your radio programmed with any preset conventional
channels?
• Which buttons have been programmed to access other
features?
• What optional accessories may suit your needs?
Indicates a conventional Analog Mode-Only feature.
Indicates a conventional Digital Mode-Only feature.
English
Charging the Battery
Preparing Your Radio for Use
Preparing Your Radio for Use
Assemble your radio by following these steps:
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . .
Attaching the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . .
Attaching the Antenna. . . . . . . . . . . . . . . . . . . . . . . . . .
Attaching the Belt Clip. . . . . . . . . . . . . . . . . . . . . . . . . .
Attaching the Universal Connector
Cover (Dust Cover) . . . . . . . . . . . . . . . . . . . . . . . . . .
Powering Up the Radio . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . .
English
page 2
page 3
page 3
page 4
page 4
page 5
page 6
Your radio is powered by a Nickel Metal-Hydride (NiMH) or
Lithium-Ion (Li-lon) battery. To avoid damage and comply with
warranty terms, charge the battery using a Motorola charger
exactly as described in the charger user guide.
Charge a new battery 14 to 16 hours before initial use for best
performance.
IMPORTANT: ALWAYS charge your IMPRES battery with an
IMPRES charger for optimized battery life and
valuable battery data. IMPRES batteries
charged exclusively with IMPRES chargers
receive a 6-month capacity warranty extension
over the standard Motorola Premium battery
warranty duration.
Attaching the Battery
Attaching the Antenna
To remove the
battery, turn the
radio off. Move
the battery latch
into unlock
position and
hold, and slide
the battery down
and off the rails.
With the radio turned off, set the antenna in its receptacle and
turn clockwise.
To remove the antenna, turn the antenna counterclockwise.
Preparing Your Radio for Use
Align the battery with the rails on the back of the radio. Press
the battery firmly, and slide upward until the latch snaps into
place. Slide battery latch into lock position.
If antenna needs to be replaced, ensure that only
MOTOTRBO antennas are used. Neglecting this will
damage your radio. See Antennas on page 111 for a
list of available antennas.
Battery Latch
English
Attaching the Belt Clip
Preparing Your Radio for Use
Align the grooves on the clip
with those on the battery and
press downward until you hear
a click.
To remove the clip, press the
belt clip tab away from the
battery. Using a key may be
helpful. Then slide the clip
upward and away from the
radio.
English
Attaching the Universal Connector Cover
(Dust Cover)
The universal connector is located on the antenna side of the
radio. It is used to connect MOTOTRBO accessories to the
radio.
Universal
Connector
Insert the hooked end of the
cover into the slots above
the universal connector.
Press downward on the
cover to seat the lower tab
properly into the RF
connector.
Turn the thumbscrew
clockwise to secure the
connector cover to the
radio.
To remove the universal
connector cover, press down on the cover and turn the
thumbscrew counterclockwise. Lift the cover up, slide the
connector cover loop upwards, and remove it from the attached
antenna.
Replace the dust cover when the universal connector is not in
use.
Powering Up the Radio
The LED lights up solid
green and the Home screen
lights up if the backlight
setting is set to turn on
automatically.
A brief tone sounds, indicating that the power up test is
successful.
NOTE: There is no power up tone if the radio tones/alerts
function is disabled (see Turning the Radio Tones/
Alerts On or Off on page 96).
LED
If your radio does not power up, check your battery. Make sure
that it is charged and properly attached. If your radio still does
not power up, contact your dealer.
To turn off the radio, rotate this knob counterclockwise until you
hear a click. You see a brief Powering Down on the radio’s
display.
Preparing Your Radio for Use
Rotate the On/Off/Volume
Control Knob clockwise
until you hear a click. You
see MOTOTRBO (TM) on the
radio’s display momentarily,
followed by a welcome
message or welcome
image.
NOTE: The Home screen does not light up during a power up if
the LED indicator is disabled (see Turning the LED
Indicator On or Off on page 102).
English
Adjusting the Volume
To increase the volume,
turn the On/Off/Volume
Control Knob clockwise.
Identifying Radio Controls
To decrease the volume,
turn this knob
counterclockwise.
NOTE: Your radio can be
programmed to
have a minimum
volume offset
where the volume
level cannot be
turned down fully.
Check with your
dealer or system
administrator for
more information.
English
Identifying Radio Controls
Take a moment to review the following:
Radio Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . . . page 8
Using the 4-Way Navigation Button . . . . . . . . . . . . . . . page 10
Accessing the Programmed Functions . . . . . . . . . . . . page 11
Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 12
Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . . . . page 13
Switching Between Conventional Analog and
Digital Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
Capacity Plus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
Radio Controls
4 Side Button 1*
5 Push-to-Talk (PTT) Button
6 Side Button 2*
18
7 Side Button 3*
17
8 Front Button P1*
16
9 Menu/OK Button
10 4-Way Navigation Button
15
14
13
12 Back/Home Button
12
13 Front Button P2*
11
11 Keypad
14 Display
15 Microphone
16 Speaker
10
17 Universal Connector for Accessories
1 Channel Selector Knob
18 Emergency Button*
2 On/Off/Volume Control Knob
19 Antenna
3 LED Indicator
Identifying Radio Controls
19
* These buttons are programmable.
English
Programmable Buttons
Your dealer can program the programmable buttons as
shortcuts to radio functions or preset channels/groups
depending on the duration of a button press:
• Short press – Pressing and releasing rapidly.
• Long press – Pressing and holding for the programmed
duration.
Identifying Radio Controls
• Hold down – Keeping the button pressed.
NOTE: The programmed duration of a button press is
applicable for all assignable radio/utility functions or
settings. See Emergency Operation on page 60 for
more information on the programmed duration of the
Emergency button.
English
Assignable Radio Functions
Bluetooth Audio Switch – Toggles audio routing between
internal radio speaker and external Bluetooth-enabled
accessory.
Contacts – Provides direct access to the contacts list.
Call Alert – Direct access to the radio contacts list to select a
radio contact to send a call alert to.
Call Forwarding – Toggles Call Forwarding on or off.
Call Log – Selects the call log list.
Voice Announcement for Channel – Plays zone and channel
announcement voice messages for the current channel. This
function is unavailable when Voice Announcement is disabled.
Emergency – Depending on the programming, initiates or
cancels an emergency alarm or call.
Intelligent Audio On/Off – Toggles Intelligent Audio on or off.
Manual Dial
ID.
– Initiates a call by keying in any subscriber
Manual Site Roam*
– Starts the manual site search.
Mic AGC On/Off – Toggles the internal microphone automatic
gain control (AGC) on or off. Not applicable during a Bluetooth
session.
* Not applicable in Capacity Plus
Monitor – Monitors a selected channel for activity.
One Touch Access – Directly initiates a predefined Private or
Group Call, a Call Alert or a Quick Text message.
Scan* – Toggles scan on or off.
Site Lock On/Off*
off.
– Toggles the automatic site roam on or
Status – Selects the status list menu.
Option Board Feature – Toggles option board feature(s) on or
off for option board-enabled channels.
Telemetry Control
remote radio.
Permanent Monitor* – Monitors a selected channel for all radio
traffic until function is disabled.
Text Message – Selects the text message menu.
Privacy
– Toggles privacy on or off.
Radio Alias and ID – Provides radio alias and ID.
– Controls the Output Pin on a local or
Transmit Interrupt Remote Dekey
– Stops the
transmission of a remote monitored radio without giving any
indicators, or an ongoing interruptible call to free the channel.
Voice Announcement On/Off – Toggles Voice Announcement
on or off.
Radio Check
– Determines if a radio is active in a system.
Radio Enable
enabled.
– Allows a target radio to be remotely
Voice Operating Transmission (VOX) – Toggles VOX on or
off.
Radio Disable
disabled.
– Allows a target radio to be remotely
Zone – Allows selection from a list of zones.
Identifying Radio Controls
Nuisance Channel Delete* – Temporarily removes an
unwanted channel, except for the Selected Channel, from the
scan list. The Selected Channel refers to the user’s selected
zone/channel combination from which scan is initiated.
Repeater/Talkaround* – Toggles between using a repeater
and communicating directly with another radio.
Remote Monitor
– Turns on the microphone of a target
radio without it giving any indicators.
* Not applicable in Capacity Plus
English
Assignable Settings or Utility Functions
Using the 4-Way Navigation Button
All Tones/Alerts – Toggles all tones and alerts on or off.
You can use the 4-way navigation button, e, to scroll through
Backlight On/Off – Toggles display backlight on or off.
options, increase/decrease values, and navigate vertically.
Backlight Brightness – Adjusts the brightness level.
Category
^ or v
< or >
Keypad Lock – Toggles keypad between locked and unlocked.
Menu
Vertical Navigation
–
Power Level – Toggles transmit power level between high and
low.
Lists
Vertical Navigation
–
View Details
Vertical Navigation
Previous/Next Item
Identifying Radio Controls
Display Mode – Toggles the day/night display mode on or off.
Squelch
normal.
10
English
– Toggles squelch level between tight and
You can use the 4-way navigation button, e, as a number,
alias, or free form text editor.
Editor Category
^ or v
< or >
Number
–
Left: Delete last digit
Right: –
Alias
–
Move cursor one
character left/right
Free Form Text
Move cursor up/
down
Move cursor one
character left/right
Numeric Values
Increase/Decrease
–
Accessing the Programmed Functions
• A short or long press of the
relevant programmable buttons.
OR
ed
• Use the 4-way navigation button as follows:
1 To access the menu, press the c button. Press the
appropriate direction of the e to access the menu
functions.
2 To select a function or enter a sub-menu, press the c
button.
3 To go back one menu level, or to return to the previous
Identifying Radio Controls
You can access various radio functions through one of the
following ways:
screen, press the d button. Long press the d button to
return to the Home screen.
NOTE: Your radio automatically exits the menu after a period
of inactivity and returns to your Home screen.
11
English
Using the Keypad
You can use the 3 x 4 alphanumeric keypad to access your radio’s features. You can use the keypad to enter subscriber aliases or IDs,
and text messages. Many characters require that you press a key multiple times. The table below shows the number of times a key
needs to be pressed to generate the required character.
Identifying Radio Controls
Number of Times Key is Pressed
12
Key
10
11
12
13
‘
English
* or del
# or space
NOTE: Press to enter “0” and long press to activate the CAPS lock. Another long press to turn off the CAPS lock.
NOTE: Press during text entry to delete the character. Press during numeric entry to enter a “*”.
NOTE: Press during text entry to insert a space. Press during numeric entry to enter a “#”.
Push-To-Talk (PTT) Button
or Off on page 98) or the PTT Sidetone
is enabled, wait
until the short alert tone ends before talking.
During a call, if the Channel Free Indication feature is
enabled on your radio (programmed by your dealer), you
will hear a short alert tone the moment the target radio (the
radio that is receiving your call) releases the PTT button,
indicating the channel is free for you to respond.
PTT Button
You will also hear the Channel Free Indication tone if your
call is interrupted, for example when the radio receives an
Emergency Call.
You can turn off the Channel Free Indication tone or the
PTT Sidetone
by disabling all radio tones and alerts
(see Turning the Radio Tones/Alerts On or Off on
page 96).
Identifying Radio Controls
The PTT button on the side of the radio serves two basic
purposes:
If the Talk Permit Tone (see Turning the Talk Permit Tone On
• While a call is in progress, the PTT button allows the radio to
transmit to other radios in the call.
Press and hold down PTT button to talk. Release the PTT
button to listen.
The microphone is activated when the PTT button is pressed.
• While a call is not in progress, the PTT button is used to make
a new call (see Making a Radio Call on page 27).
13
English
Switching Between Conventional Analog
and Digital Mode
Each channel in your radio can be configured as a conventional
analog or conventional digital channel. Use the Channel
Selector Knob to switch between an analog or a digital channel.
Identifying Radio Controls
Channel
Selector
Knob
Capacity Plus
Capacity Plus is a single-site trunking configuration of the
MOTOTRBO radio system, which uses a pool of channels to
support hundreds of users and up to 254 Groups. This feature
allows your radio to efficiently utilize the available number of
programmed channels while in Repeater Mode.
You can only access channel(s) with Capacity Plus via the
Channel Selector Knob, while features supported in Capacity
Plus can be accessed via the menu and/or a programmable
button press.
Icons of features not applicable to Capacity Plus will not be
available in the menu. You will hear a negative indicator tone if
you access a feature not applicable to Capacity Plus via a
programmable button press.
When switching from digital to analog mode, certain features
are unavailable. Icons for the digital features (such as
Messages) reflect this change by appearing ‘grayed out’.
Disabled features are hidden in the menu.
Your radio also has features available in both analog and digital
mode. However, the minor differences in the way each feature
works does NOT affect the performance of your radio.
NOTE: Your radio also switches between digital and analog
modes during a dual mode scan (see Scan on
page 44).
14
English
Your radio also has features that are available in both
conventional digital mode and Capacity Plus. However, the
minor differences in the way each feature works does NOT
affect the performance of your radio.
Check with your dealer or system administrator for more
information on this system.
Identifying Status Indicators
The 132 x 90 pixels, 256 colors, liquid crystal display (LCD) of
your radio shows radio status, text entries, and menu entries.
The following are icons that appear on the status bar at the top
of the radio’s display. Icons are displayed on the status bar,
arranged left-to-right, in order of appearance/usage.
Received Signal Strength Indicator (RSSI)
The number of bars displayed represents the radio
signal strength. Four bars indicate the strongest
signal. This icon is only displayed while receiving.
Battery
The number of bars (0 – 4) shown indicates the
charge remaining in the battery.
Blinks when the battery is low.
Bluetooth
The Bluetooth feature is enabled but there is no
remote Bluetooth device connected.
Identifying Status Indicators
Your radio indicates its operational status through the following:
Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 15
Call Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 17
Advanced Menu Icons . . . . . . . . . . . . . . . . . . . . . . . . . page 17
Mini Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 18
Sent Item Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 18
LED Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 19
Audio Tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20
Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20
Display Icons
Bluetooth Connected
The Bluetooth feature is enabled. The icon stays lit
when one or more remote Bluetooth devices are
connected.
Emergency
Radio is in Emergency mode.
15
English
Notification
Notification list is not empty.
GPS Available
The GPS feature is enabled. The icon stays lit when
a position fix is available.
Scan*
Scan feature is enabled.
GPS Not Available/Out of Range
The GPS feature is enabled but is not receiving data
from the satellite.
Identifying Status Indicators
Scan – Priority 1*
Radio detects activity on channel/group designated
as Priority 1).
16
English
Option Board
The Option Board is enabled.
Scan – Priority 2 *
Radio detects activity on channel/group designated
as Priority 2.
Option Board Non-Function
The Option Board is disabled.
Vote Scan
Vote scan feature is enabled.
Tones Disable
Tones are turned off.
Monitor
Selected channel is being monitored.
Power Level
Radio is set at Low power.
Talkaround*
In the absence of a repeater, radio is currently
configured for direct radio to radio communication.
OR
Radio is set at High power.
* Not a pplicable in C apacity Plus
Site Roaming*
The site roaming feature is enabled.
Secure
The Privacy feature is enabled.
Unsecure
The Privacy feature is disabled.
* Not applicable in Capacity Plus
Call Icons
Private Call
Indicates a Private Call in progress.
In the Contacts list, it indicates a subscriber alias
(name) or ID (number).
Group Call/All Call
Indicates a Group Call or All Call in progress.
In the Contacts list, it indicates a group alias (name)
or ID (number).
The following icons appear beside menu items that offer a
choice between two options or as an indication that there is a
sub-menu offering two options.
Checkbox (Empty)
Indicates the option is not selected.
Checkbox (Checked)
Indicates the option is selected.
Solid Black Box
Indicates the option selected for the menu item with a
sub-menu.
Identifying Status Indicators
The following icons appear on the radio’s display during a call.
These icons also appear in the Contacts list to indicate ID type.
Advanced Menu Icons
17
English
Mini Notice Icons
The following icons appear momentarily on the radio’s display
after an action to perform task is taken.
Identifying Status Indicators
Successful Transmission (Positive)
Successful action taken.
18
English
Sent Item Icons
The following icons appear in the Sent Items folder.
OR
Sent Successfully
The text message is sent successfully.
OR
Send Failed
The text message cannot be sent.
Failed Transmission (Negative)
Failed action taken.
Transmission in Progress (Transitional)
Transmitting. This dynamic icon is seen before
indication for Successful Transmission or Failed
Transmission.
In-Progress
• The text message to a subscriber alias or ID is
OR
pending transmission, followed by waiting for
acknowledgement.
• The text message to a group alias or ID is pending
transmission.
LED Indicator
LED Indicator
Double blinking yellow – Radio is no longer connected to the
repeater while in Capacity Plus, all Capacity Plus channels are
currently busy, Auto Roaming is enabled, radio is actively
searching for a new site. Also indicates radio has yet to respond
to a group call alert, or radio is locked.
NOTE: While in conventional mode, when the LED blinks
green, it indicates the radio detects activity over the air.
Due to the nature of the digital protocol, this activity
may or may not affect the radio's programmed channel.
For Capacity Plus, there is no LED indication when the
radio is detecting activity over the air.
Blinking red – Radio is transmitting at low battery condition,
receiving an emergency transmission or has failed the self-test
upon powering up.
Identifying Status Indicators
The LED indicator shows the operational status of your radio.
Blinking yellow – Radio is scanning for activity or receiving a
Call Alert.
Solid green – Radio is powering up, or transmitting.
Blinking green – Radio is receiving a non-privacy-enabled call
or data, or detecting activity over the air.
Double blinking green – Radio is receiving a privacy-enabled
call or data
Solid yellow – Radio is monitoring a conventional channel.
19
English
Audio Tones
Alert tones provide you with audible indications of the radio’s
status or the radio’s response to data received.
Continuous Tone A monotone sound. Sounds
continuously until termination.
Identifying Status Indicators
Periodic Tone
Repetitive Tone
Sounds periodically depending on the
duration set by the radio. Tone starts,
stops, and repeats itself.
A single tone that repeats itself until it is
terminated by the user.
Momentary Tone Sounds only once for a short period of
time defined by the radio.
20
English
Indicator Tones
High pitched tone
Low pitched tone
Positive Indicator Tone
Negative Indicator Tone
Making and Receiving Calls
Use this navigation guide to familiarize yourself with the basic
Call features:
Selecting a Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 21
Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 21
Selecting a Radio Channel, Subscriber ID,
or Group ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 23
Receiving and Responding to a Radio Call . . . . . . . . . page 23
Making a Radio Call . . . . . . . . . . . . . . . . . . . . . . . . . . page 27
Stopping a Radio Call . . . . . . . . . . . . . . . . . . . . . . . . . page 33
Talkaround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 33
Monitoring Features. . . . . . . . . . . . . . . . . . . . . . . . . . . page 34
A site is a specific area where a base station is placed to
provide optimal coverage for the radio.
If enabled, your radio is able to connect to different available
sites via an Internet Protocol (IP) network.
See IP Site Connect on page 84 for more information.
Selecting a Zone
A zone is a group of channels. Your radio supports up to 1000
channels and 250 zones, with a maximum of 160 channels per
zone.
Use the following procedure to select a zone.
Procedure:
Press the programmed Zone button and proceed to Step 3.
OR
Follow the procedure below.
Making and Receiving Calls
Once you understand how your MOTOTRBO Portable is
configured, you are ready to use your radio.
Selecting a Site
1 c to access the menu.
2 ^ or v to Zone and press c to select.
3 The current zone is displayed and indicated by a 9.
21
English
4 ^ or v to the required zone and proceed to Step 7.
OR
Key in the first character of the required zone.
Selecting a Radio Channel, Subscriber ID,
or Group ID
5 A blinking cursor appears.
Use the keypad to type the required zone.
Press < to move one space to the left.
Making and Receiving Calls
Press > to move one space to the right.
Press the *DEL key to delete any unwanted characters.
6 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
results.
The alias search is case-insensitive. If there are two or more
zones with the same name, the radio displays the zone that
is listed first in the zone list.
7 Press c to select.
8 The display shows Selected momentarily and
returns to the selected zone screen.
22
English
Procedure:
Once the required zone is displayed (if you have multiple
zones in your radio), turn the programmed Channel Selector
Knob to select the channel.
Receiving and Responding to a Radio Call
LED Indicator
To receive a call from a group of users, your radio must be
configured as part of that group.
Procedure:
When you receive a Group Call (while on the Home screen):
The LED lights up solid green
while the radio is transmitting
and blinks green when the
radio is receiving.
1 The LED blinks green.
NOTE: The LED lights up solid green while the radio is
transmitting and double blinks green when the radio is
receiving a privacy-enabled call.
To unscramble a privacy-enabled call, your radio must
have the same Privacy Key, OR the same Key Value
and Key ID (programmed by your dealer), as the
transmitting radio (the radio you are receiving the call
from).
3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
See Privacy on page 82 for more information.
2 The Group Call icon appears in the top right corner. The first
text line shows the caller alias. The second text line displays
the group call alias.
your mouth.
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
Press the PTT button to respond to the call.
OR
Making and Receiving Calls
Once the channel, subscriber
ID or group ID is displayed,
you can proceed to receive
and respond to calls.
Receiving and Responding to a Group Call
If the Voice Interrupt feature is enabled, press the PTT
button to stop the current call from the transmitting radio and
free the channel for you to talk/respond.
23
English
5 The LED lights up solid green.
Receiving and Responding to a Private Call
6 Wait for the Talk Permit Tone to finish (if enabled) and speak
A Private Call is a call from an individual radio to another
individual radio.
clearly into the microphone.
OR
Making and Receiving Calls
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
There are two types of Private Calls. The first type, where a
radio presence check is performed prior to setting up the call,
while the other sets up the call immediately.
7 Release the PTT button to listen.
When your radio is checked, the LED blinks green.
8 If there is no voice activity for a predetermined period of
Only one of these call types can be programmed to your radio
by your dealer.
time, the call ends.
See Making a Group Call on page 27 for details on making a
Group Call.
NOTE: If the radio receives a Group Call while not on the
Home screen, it remains on its current screen prior to
answering the call.
24
English
Long press the d button to go to the Home screen to
view the caller alias before replying.
Procedure:
When you receive a Private Call:
1 The LED blinks green.
2 The Private Call icon appears in the top right corner. The
first text line shows the caller alias.
3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
4 If the Channel Free Indication feature is enabled, you will
5 The LED lights up solid green.
6 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
7 Release the PTT button to listen.
8 If there is no voice activity for a predetermined period of
time, the call ends.
9 You hear a short tone. The display shows Call Ended.
See Making a Private Call on page 28 for details on making a
Private Call.
Receiving an All Call
An All Call is a call from an individual radio to every radio on the
channel. It is used to make important announcements requiring
the user’s full attention.
Procedure:
When you receive an All Call:
1 A tone sounds and the LED blinks green.
2 The Group Call icon appears in the top right corner. The first
text line shows the caller alias. The second text line displays
All Call.
3 Once the All Call ends, the radio returns to the previous
screen before receiving the call.
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is now
available for use.
Making and Receiving Calls
hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
Press the PTT button to respond to the call.
OR
If the Voice Interrupt feature is enabled, press the PTT
button to stop the current call from the transmitting radio and
free the channel for you to talk/respond.
You cannot respond to an All Call.
See Making an All Call on page 29 for details on making an All
Call.
NOTE: The radio stops receiving the All Call if you switch to a
different channel while receiving the call.
During an All Call, you will not be able to use any
programmed button functions until the call ends.
25
English
Receiving and Responding to a Selective Call
A Selective Call is a call from an individual radio to another
individual radio. It is a Private Call on an analog system.
Procedure:
When you receive a Selective Call:
1 The LED blinks green.
Making and Receiving Calls
2 The Private Call icon appears in the top right corner. The
first text line shows the caller alias or Selective Call or
Alert with Call.
3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
4 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
Press the PTT button to respond to the call.
5 The LED lights up solid green.
6 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
7 Release the PTT button to listen.
8 If there is no voice activity for a predetermined period of
time, the call ends.
26
9 You hear a short tone. The display shows Call Ended.
English
NOTE: See Making a Selective Call on page 30 for details on
making a Private Call.
Making a Radio Call
Making a Call with the Channel Selector Knob
Making a Group Call
• The Channel Selector Knob
To make a call to a group of users, your radio must be
configured as part of that group.
• A programmed One Touch Access button
• The programmed number keys – This method is for Group,
Procedure:
Private and All Calls only and is used with the keypad (see
Making a Group, Private or All Call with the
1 Turn the Channel Selector Knob to select the channel with
Programmable Number Key on page 32).
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
• The Contacts list (see Contacts Settings on page 47)
• Manual Dial (via Contacts) – This method is for Private Calls
only and is dialed using the keypad (see Making a Private
Call from Contacts on page 49).
NOTE: Your radio must have the Privacy feature enabled on
the channel to send a privacy-enabled transmission.
Only target radios with the same Privacy Key OR the
same Key Value and Key ID as your radio will be able
to unscramble the transmission.
See Privacy on page 82 for more information.
the active group alias or ID.
your mouth.
3 Press the PTT button to make the call. The LED lights up
solid green. The Group Call icon appears in the top right
corner. The first text line shows the group call alias.
4 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
OR
Making and Receiving Calls
You can select a channel, subscriber ID, or group by using:
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
5 Release the PTT button to listen.When the target radio
responds, the LED blinks green. You see the Group Call
icon, the group alias or ID, and transmitting radio alias or ID
on your display.
27
English
6
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the target radio
releases the PTT button, indicating the channel is free for
you to respond. Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
7 Radio returns to the screen you were on prior to initiating the
Making and Receiving Calls
call.
You can also make a Group Call via Contacts (see Making a
Group Call from Contacts on page 48).
28
English
Making a Private Call
While you can receive and/or respond to a Private Call
initiated by an authorized individual radio, your radio
must be programmed for you to initiate a Private Call.
You will hear a negative indicator tone, when you make a
Private Call via the Contacts list, Call Log, One Touch Access
button, the programmed number keys, or the Channel Selector
Knob, if this feature is not enabled.
Use the Text Message or Call Alert features to contact an
individual radio. See Text Message Features on page 67 or
Call Alert Operation on page 59 for more information.
Procedure:
1 Turn the Channel Selector Knob to select the channel with
the active subscriber alias or ID.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3 Press the PTT button to make the call. The LED lights up
solid green. The Private Call icon appears in the top right
corner. The first text line shows the subscriber alias. The
second text line displays the call status.
4 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
responds, the LED blinks green.
6 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
7 You hear a short tone. The display shows Call Ended.
You can also make a Private Call via Contacts (see Making a
Private Call from Contacts on page 49) or perform a quick
alphanumeric search for the required alias via a keypad entry
(see Making a Call by Alias Search on page 50).
This feature allows you to transmit to all users on the channel.
Your radio must be programmed to allow you to use this feature.
Procedure:
1 Turn the Channel Selector Knob to select the channel with
the active All Call group alias or ID.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3 Press the PTT button to make the call. The LED lights up
solid green. The Group Call icon appears in the top right
corner. The first text line shows All Call.
4 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
Making and Receiving Calls
5 Release the PTT button to listen. When the target radio
Making an All Call
Users on the channel cannot respond to an All Call.
29
English
Making a Selective Call
Just like a Private Call, while you can receive and/or
respond to a Selective Call initiated by an authorized
individual radio, your radio must be programmed for you
to initiate a Selective Call.
Procedure:
1 Turn the Channel Selector Knob to select the channel with
Making and Receiving Calls
the active subscriber alias or ID.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3 Press the PTT button to make the call. The LED lights up
solid green. The Private Call icon appears in the top right
corner. The first text line shows the subscriber alias. The
second text line displays the call status.
30
English
4 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and speak
clearly into the microphone.
5 Release the PTT button to listen. When the target radio
responds, the LED blinks green.
6 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
7 You hear a short tone. The display shows Call Ended.
Making a Group or Private Call with the One Touch
Access Button
You can ONLY have one alias or ID assigned to a One Touch
Access button. Your radio can have multiple One Touch
Access buttons programmed.
Procedure:
1 Press the programmed One Touch Access button to make
a Group or Private Call to the predefined alias or ID.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3 Press the PTT button to make the call. The LED lights up
solid green. The Group/Private Call icon appears in the top
right corner. The first text line shows the caller alias. The
second text line displays the call status for a Private Call.
speak clearly into the microphone.
OR
For Group Call only: Wait for the PTT Sidetone to
finish (if enabled) and speak clearly into the microphone.
5 Release the PTT button to listen. When the target radio
responds, the LED blinks green.
6 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
7 Radio returns to the screen you were on prior to initiating the
call.
For a Private Call, you hear a short tone when the call ends.
Making and Receiving Calls
The One Touch Access feature allows you to make a Group or
Private Call to a predefined alias or ID easily. This feature can
be assigned to a short or long programmable button press, or to
a long numeric button press.
4 Wait for the Talk Permit Tone to finish (if enabled) and
31
English
Making a Group, Private or All Call with the
Programmable Number Key
Making and Receiving Calls
The Programmable Number Key feature allows you to make a
Group, Private or All Call to a predefined alias or ID easily. This
feature can be assigned to all the available number keys on a
keypad.
You can ONLY have one alias or ID assigned to a number key,
but you can have more than one number key associated to an
alias or ID.
Procedure:
When you are on the Home screen:
1 Long press the programmed number key to make a Group,
Private or All Call to the predefined alias or ID.
If the number key is not associated to an entry, a negative
indicator tone sounds.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3 Press the PTT button to make the call. The LED lights up
solid green. The Group/Private Call icon appears in the top
right corner. The first text line shows the caller alias. The
second text line displays either the call status for a Private
Call or All Call for All Call.
32
English
4 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
OR
For Group Call only: Wait for the PTT Sidetone to
finish (if enabled) and speak clearly into the microphone.
5 Release the PTT button to listen. When the target radio
responds, the LED blinks green.
6 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
7 Radio returns to the screen you were on prior to initiating the
call.
For a Private Call, you hear a short tone when the call ends.
See Assigning an Entry to a Programmable Number Key on
page 51 for details on assigning an entry to a number key on
the keypad.
Stopping a Radio Call
You can continue to communicate when your repeater is not
operating, or when your radio is out of the repeater’s range but
within talking range of other radios.
This is called “talkaround”.
Your radio must be programmed to allow you to use this feature.
Procedure:
While on the required channel:
NOTE: This feature is not applicable in Capacity Plus.
2 The display shows Remote Dekey.
Procedure:
Press the programmed Repeater/Talkaround button to toggle
between talkaround and repeater modes.
OR
Follow the procedure below.
3 Wait for acknowledgment.
1 c to access the menu.
4 The radio sounds a positive indicator tone and the display
2 ^ or v to Utilities and press c to select.
1 Press the programmed Transmit Interrupt Remote Dekey
button.
shows Remote Dekey Success, indicating that the channel
is now free.
OR
The radio sounds a negative indicator tone and the display
shows Remote Dekey Failed.
On the interrupted radio, the display shows Call Interrupted
and your radio sounds a negative indicator tone until you
release the PTT button, if it is transmitting an interruptible call
that is stopped via this feature.
3 ^ or v to Radio Settings and press c to select.
Making and Receiving Calls
This feature allows you to stop an ongoing Group or Private Call
to free the channel for transmission. For example, when a radio
experiences a “stuck microphone” condition where the PTT
button is inadvertently pressed by the user.
Talkaround
4 ^ or v to Talkaroundc.
5 Press c to enable Talkaround. The display shows 9
beside Enabled.
OR
Press c to disable Talkaround. The 9 disappears from
beside Enabled.
33
English
6 The screen automatically returns to the previous menu.
Monitoring Features
The Talkaround setting is retained even after powering down.
NOTE: At Step 4, you can also use < or > to change the
selected option.
Monitoring a Channel
Use the Monitor feature to make sure a channel is clear before
transmitting.
NOTE: This feature is not applicable in Capacity Plus.
Making and Receiving Calls
Procedure:
34
English
1 Press and hold the programmed Monitor button and listen
for activity.
2 The monitor icon appears on the status bar and the LED
lights up solid yellow.
3 You hear radio activity or total silence, depending on how
your radio is programmed.
4 When you hear “white noise” (that is, the channel is free),
press the PTT button to talk and release it to listen.
Permanent Monitor
NOTE: This feature is not applicable in Capacity Plus.
Procedure:
1 Press the programmed Permanent Monitor button.
2 Radio sounds an alert tone, the LED lights up solid yellow,
and the display shows Permanent Monitor On. The
monitor icon appears on the status bar.
3 Press the programmed Permanent Monitor button to exit
Permanent Monitor mode.
4 Radio sounds an alert tone, the LED turns off, and display
shows Permanent Monitor Off.
Making and Receiving Calls
Use the Permanent Monitor feature to continuously monitor a
selected channel for activity.
35
English
Advanced Features
Advanced Features
36
Use this navigation guide to learn more about advanced
features available with your radio:
Radio Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 37
Remote Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 38
Scan Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 40
Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 44
Vote Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 47
Contacts Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 47
Call Indicator Settings . . . . . . . . . . . . . . . . . . . . . . . . . page 53
Call Log Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 57
Call Alert Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . page 59
Emergency Operation . . . . . . . . . . . . . . . . . . . . . . . . . page 60
Text Message Features. . . . . . . . . . . . . . . . . . . . . . . . page 67
Analog Message Encode . . . . . . . . . . . . . . . . . . . . . . page 80
Analog Status Update . . . . . . . . . . . . . . . . . . . . . . . . . page 81
Privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 82
Dual Tone Multi Frequency (DTMF) . . . . . . . . . . . . . . page 84
IP Site Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 84
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 87
Lone Worker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 89
Password Lock Features. . . . . . . . . . . . . . . . . . . . . . . page 90
Bluetooth Operation . . . . . . . . . . . . . . . . . . . . . . . . . . page 93
Notification List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 96
English
Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 96
Front Panel Programming (FPP) . . . . . . . . . . . . . . . . page 110
Radio Check
5 If successful, a positive indicator tone sounds and the
If enabled, this feature allows you to determine if another radio
is active in a system without disturbing the user of that radio. No
audible or visual notification is shown on the target radio.
This feature is only applicable for subscriber aliases or IDs.
6 Radio returns to the subscriber alias or ID screen.
Sending a Radio Check
OR
Procedure:
Use the programmed Radio Check button.
Procedure:
Use the menu.
1 Press the programmed Radio Check button.
1 c to access the menu.
2 ^ or v to the required subscriber alias or ID and press c
2 ^ or v to Contacts and press c to select.
to select.
3 The display shows transitional mini notice, indicating the
request is in progress. The LED lights up solid green.
4 Wait for acknowledgement.
Advanced Features
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
3 ^ or v to the required subscriber alias or ID and press c
to select.
OR
^ or v to Manual Dial and press c to select.
If there was previously dialed ID, the ID appears along with
a blinking cursor. Use the keypad to edit the ID. Press c to
select.
OR
^ or v to Manual
Dial and press c to select. Key in the
subscriber alias or ID and press c.
4 ^ or v to Radio Check and press c to select.
37
English
5 The display shows transitional mini notice, indicating the
request is in progress. The LED lights up solid green.
6 Wait for acknowledgement.
7 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
8 Radio returns to the subscriber alias or ID screen.
Advanced Features
If the d button is pressed when the radio is waiting for
acknowledgement, a tone sounds, and the radio terminates all
retries and exits Radio Check mode.
38
English
Remote Monitor
Use the Remote Monitor feature to turn on the microphone of a
target radio (subscriber alias or IDs only). No audible or visual
indication is given to the target radio. You can use this feature to
monitor, remotely, any audible activity surrounding the target
radio.
Your radio must be programmed to allow you to use this feature.
Initiating Remote Monitor
Procedure:
Use the programmed Remote Monitor button.
1 Press the programmed Remote Monitor button.
2 ^ or v to the required subscriber alias or ID and press c
to select.
3 The display shows transitional mini notice, indicating the
request is in progress. The LED lights up solid green.
4 Wait for acknowledgment.
5 If successful, a positive indicator tone sounds and the
display shows positive mini notice. Your radio starts playing
audio from the monitored radio for a programmed duration
and display shows Rem. Monitor.
Once the timer expires, the radio sounds an alert tone and
the LED turns off.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
Procedure:
Use the menu.
1 c to access the menu.
2 ^ or v to Contacts and press c to select.
3 ^ or v to the required subscriber alias or ID and press c
to select.
OR
^ or v to Manual Dial and press c to select.
If there was previously dialed ID, the ID appears along with
display shows positive mini notice. Your radio starts playing
audio from the monitored radio for a programmed duration
and display shows Rem. Monitor.
Once the timer expires, the radio sounds an alert tone and
the LED turns off.
OR
If unsuccessful, the radio sounds a negative indicator tone
the display shows negative mini notice.
Advanced Features
OR
7 If successful, a positive indicator tone sounds and the
a blinking cursor. Use the keypad to edit the ID. Press c to
select.
OR
^ or v to Manual
Dial and press c to select. Key in the
subscriber alias or ID and press c to select.
4 ^ or v to Remote Mon. and press c to select.
5 The display shows transitional mini notice, indicating the
request is in progress. The LED lights up solid green.
6 Wait for acknowledgment.
39
English
Stopping Remote Monitor
Remote Monitor automatically stops after a programmed
duration or when there is any user operation on the target radio.
Procedure:
1 Press the programmed Transmit Interrupt Remote Dekey
button.
2 The display shows transitional mini notice, indicating the
request is in progress. The LED lights up solid green.
3 Wait for acknowledgment.
Advanced Features
4 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
Scan Lists
Scan lists are created and assigned to individual channels/
groups. Your radio scans for voice activity by cycling through the
channel/group sequence specified in the scan list for the current
channel/group.
Your radio can support up to 250 scan lists, with a maximum of
16 members in a list. Each scan list supports a mixture of both
analog and digital entries.
You can add, delete, or prioritize channels by editing a scan list.
You can attach a new scan list to your radio via Front Panel
Programming.
NOTE: This feature is not applicable in Capacity Plus.
Viewing an Entry in the Scan List
Procedure:
1 c to access the menu.
2 ^ or v to Scan and press c to select.
3 ^ or v to Scan List and press c to select.
4 Use ^ or v to view each member on the list.
The priority icon appears left of the member’s alias, if set, to
indicate whether the member is on a Priority 1 or Priority 2
40
English
Editing the Scan List
There is no priority icon if priority is set to None.
Adding a New Entry to the Scan List
Viewing an Entry in the Scan List by Alias Search
Procedure:
Procedure:
1 c to access the menu.
1 c to access the menu.
2 ^ or v to Scan and press c to select.
2 ^ or v to Scan and press c to select.
3 ^ or v to Scan List and press c to select.
3 ^ or v to Scan List and press c to select.
4 ^ or v to Add Member and press c to select.
4 Key in the first character of the required alias.
5 ^ or v to the required alias or ID and proceed to Step 8.
5 A blinking cursor appears.
Use the keypad to type the required alias.
Press < to move one space to the left.
Press > to move one space to the right.
Press the *DEL key to delete any unwanted characters.
6 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
results.
The alias search is case-insensitive. If there are two or more
entries with the same name, the radio displays the entry that is
listed first in the scan list.
OR
Key in the first character of the required alias.
Advanced Features
channel list. You cannot have multiple Priority 1 or Priority 2
channels in a scan list.
6 A blinking cursor appears.
Use the keypad to type the required alias.
Press < to move one space to the left.
Press > to move one space to the right.
Press the *DEL key to delete any unwanted characters.
7 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
results.
The alias search is case-insensitive. If there are two or more
aliases with the same name, the radio displays the alias that
is listed first in the list.
41
English
8 Press c to select.
Deleting an Entry from the Scan List
9 ^ or v to the required priority level and press c to select.
Procedure:
10 The display shows positive mini notice, followed
immediately by Add Another?.
11 ^ or v to Yes and press c to select, to add another
entry, and repeat Steps 5 to 9.
OR
^ or v to No and press c to select to save the current
list.
1 c to access the menu.
2 ^ or v to Scan and press c to select.
3 ^ or v to Scan List and press c to select.
4 ^ or v to the required alias or ID and proceed to Step 7.
OR
Key in the first character of the required alias.
5 A blinking cursor appears.
Advanced Features
Use the keypad to type the required alias.
42
English
Press < to move one space to the left.
Press > to move one space to the right.
Press the *DEL key to delete any unwanted characters.
6 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
results.
The alias search is case-insensitive. If there are two or more
entries with the same name, the radio displays the entry that
is listed first in the scan list.
7 Press c to select.
8 ^ or v to Delete and press c to select.
9 At Delete Entry?, ^ or v to Yes and press c to select,
^ or v to No and press c to select to return to the
previous screen.
10 Repeat Steps 4 to 9 to delete other entries.
After deleting all required aliases or IDs, long press d to return
to the Home screen.
Setting and Editing Priority for an Entry in the Scan
List
Procedure:
1 c to access the menu.
2 ^ or v to Scan and press c to select.
3 ^ or v to Scan List and press c to select.
4 ^ or v to the required alias or ID and proceed to Step 7.
OR
Key in the first character of the required alias.
5 A blinking cursor appears.
Advanced Features
to delete the entry. The display shows positive mini notice.
OR
Use the keypad to type the required alias.
Press < to move one space to the left.
Press > to move one space to the right.
Press the *DEL key to delete any unwanted characters.
6 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
results.
The alias search is case-insensitive. If there are two or more
entries with the same name, the radio displays the entry that
is listed first in the scan list.
43
English
7 Press c to select.
8 ^ or v to Edit Priority and press c to select.
9 ^ or v to the required priority level and press c to select.
10 The display shows positive mini notice before returning to
the previous screen.
11 The priority icon appears left of the member’s name.
There is no priority icon if priority is set to None.
Scan
When you start a scan, your radio cycles through the
programmed scan list for the current channel looking for voice
activity.
The LED blinks yellow and the scan icon appears on the status
bar.
During a dual mode scan, if you are on a digital channel, and
your radio locks onto an analog channel, it automatically
switches from digital mode to analog mode for the duration of
the call. This is also true for the reverse.
Advanced Features
There are two ways of initiating scan:
44
English
• Main Channel Scan (Manual): Your radio scans all the
channels/groups in your scan list. On entering scan, your
radio may – depending on the settings – automatically start
on the last scanned “active” channel/group or on the channel
where scan was initiated.
• Auto Scan (Automatic): Your radio automatically starts
scanning when you select a channel/group that has Auto
Scan enabled.
NOTE: This feature is not applicable in Capacity Plus.
Responding to a Transmission During a Scan
Procedure:
Press the programmed Scan button to start or stop Scan.
OR
Follow the procedure below.
During scanning, your radio stops on a channel/group where
activity is detected. The radio stays on that channel for a
programmed time period known as “hang time”.
1 Use the Channel Selector Knob to select a channel
programmed with a scan list.
2 c to access the menu.
3 ^ or v to Scan and press c to select.
4 ^ or v to Scan State and press c to select.
Procedure:
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
5 ^ or v to required scan state and press c to select.
2 Press the PTT button during hang time. The LED lights up
6 The display shows Scan On when scan is enabled. The LED
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
blinks yellow and the scan icon appears.
OR
The display shows Scan Off if scan is disabled. The LED
turns off and the scan icon disappears.
appearsdisappearsWhile scanning, the radio will only accept
data (e.g. text message, location, telemetry, or PC data) if
received on its Selected Channel.
Advanced Features
Starting and Stopping Scan
solid green.
clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
4 Release the PTT button to listen.
5 If you do not respond within the hang time, the radio returns
to scanning other channels/groups.
45
English
Deleting a Nuisance Channel
Restoring a Nuisance Channel
If a channel continually generates unwanted calls or noise
(termed a “nuisance” channel), you can temporarily remove the
unwanted channel from the scan list.
Procedure:
To restore the deleted nuisance channel, do one of the
following:
This capability does not apply to the channel designated as the
Selected Channel.
• Turn the radio off and then power it on again, OR
Procedure:
1 When your radio “locks on to” an unwanted or nuisance
channel, press the programmed Nuisance Channel Delete
button until you hear a tone.
2 Release the Nuisance Channel Delete button. The
Advanced Features
nuisance channel is deleted.
Deleting a “nuisance” channel is only possible through the
programmed Nuisance Channel Delete button. This feature is
not accessible through the menu.
46
English
• Stop and restart a scan via the programmed Scan button or
menu, OR
• Change the channel via the Channel Selector Knob.
Vote Scan
Contacts Settings
Contacts provides “address-book” capabilities on your radio.
Each entry corresponds to an alias or ID that you use to initiate
a call.
Your radio scans analog channels of multiple base stations and
performs a voting process to select the strongest received
signal. Once that is established, your radio unmutes to
transmissions from that base station.
Each entry, depending on context, associates with one of five
types of calls: Group Call, Private Call, All Call, PC Call or
Dispatch Call.
The LED blinks yellow and the vote scan icon appears on the
status bar.
To respond to a transmission during a Vote Scan, follow the
same procedures as Responding to a Transmission During a
Scan on page 45.
PC Call and Dispatch Call are data-related. They are only
available with the applications. Refer to the data applications
documentation for more information.
NOTE: If the Privacy feature is enabled on a channel, you
can make privacy-enabled Group Call, Private Call,
and All Call on that channel. Only target radios with
the same Privacy Key OR the same Key Value and
Key ID as your radio will be able to unscramble the
transmission.
Advanced Features
Vote Scan provides you with wide area coverage in areas where
there are multiple base stations transmitting identical
information on different analog channels.
See Privacy on page 82 for more information.
Additionally, Contacts menu allows you to assign each entry to a
programmable number key or more on a keypad. If an entry is
assigned to a number key, your radio can perform a quick dial
on the entry.
47
English
Your radio supports two Contacts lists, one for Analog contacts
and one for Digital contacts, with a maximum of 500 members
for each Contacts list.
Each entry within Contacts displays the following information:
• Call Type
• Call Alias
• Call ID
Advanced Features
NOTE: You can add, or edit subscriber IDs for the Digital
Contacts list. Deleting subscriber IDs can only be
performed by your dealer.
For the Analog Contacts list, you can only view the
subcriber IDs, edit the subscriber IDs, and initiate a
Call Alert. Adding and deleting capabilities can only be
performed by your dealer.
Making a Group Call from Contacts
Procedure:
1 c to access the menu.
2 ^ or v to Contacts and press c to select.The entries
are alphabetically sorted.
3 ^ or v to the required group alias or ID.
48
English
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
5 Press the PTT button to make the call. The LED lights up
solid green.
6 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
7 Release the PTT button to listen. When any user in the
group responds, the LED blinks green. You see the Group
Call icon, the group ID, and that user’s ID on your display.
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the target radio
releases the PTT button, indicating the channel is free for
you to respond. Press the PTT button to respond.
OR
If there is no voice activity for a programmed period of time,
the call ends.
Making a Private Call from Contacts
solid green. The display shows the destination alias.
1 c to access the menu.
6 Wait for the Talk Permit Tone to finish (if enabled) and speak
2 ^ or v to Contacts and press c to select.The entries
7 Release the PTT button to listen. When the target radio
are alphabetically sorted.
3 ^ or v to the required subscriber alias or ID.
OR
^ or v to Manual
Dial and press c to select.
If there was previously dialed subscriber alias or ID, the
alias or ID appears along with a blinking cursor.
Use the keypad to edit the ID.
OR
^ or v to Manual
Dial and press c to select.
Use the keypad to enter a new subscriber alias or ID.
clearly into the microphone.
responds, the LED blinks green and the display shows the
transmitting user's ID.
8 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a programmed period of time,
the call ends.
Advanced Features
Procedure:
5 Press the PTT button to make the call. The LED lights up
9 You hear a short tone. The display shows Call Ended.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
49
English
Making a Call by Alias Search
7 Press the PTT button to make the call. The LED lights up
You can also use alias or alphanumeric search to retrieve the
required subscriber alias.
8 Wait for the Talk Permit Tone to finish (if enabled) and speak
This feature is only applicable while in Contacts.
Procedure:
1 c to access the menu.
2 ^ or v to Contacts and press c to select. The entries
are alphabetically sorted.
3 Key in the first character of the required alias.
Advanced Features
4 A blinking cursor appears.
Use the keypad to type the required alias.
Press < to move one space to the left.
Press > to move one space to the right.
Press the *DEL key to delete any unwanted characters.
5 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
results.
The alias search is case-insensitive. If there are two or more
aliases with the same name, the radio displays the alias that
is listed first in the Contacts list.
6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
50
English
solid green. The display shows the destination alias.
clearly into the microphone.
9 Release the PTT button to listen. When the target radio
responds, the LED blinks green.
10 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a programmed period of time,
the call ends.
11 You hear a short tone. The display shows Call Ended.
NOTE: Press d button or c to exit alias search.
Your radio may be programmed to perform a radio
presence check prior to setting up the Private Call. If
the target radio is not available, you hear a short tone
and see negative mini notice on the display.
The radio returns to the menu prior to initiating the
radio presence check.
Number Key
Procedure:
1 c to access the menu.
2 ^ or v to Contacts and press c to select. The entries
are alphabetically sorted.
3 ^ or v to the required alias or ID and press c to select.
4 ^ or v to Program Key and press c to select.
5 ^ or v to the desired number key and press c to select.
OR
If the number key is currently assigned to another entry, the
display shows The Key is Already Used and then, the
first line of the display shows Overwrite?.
Advanced Features
If you release the PTT button while the radio is setting
up the call, it exits without any indication and returns to
the previous screen.
Assigning an Entry to a Programmable
^ or v to Yes and press c to select.
6 The radio sounds a positive indicator tone and the display
shows positive mini notice.
7 The screen automatically returns to the previous menu.
51
English
NOTE: Each entry can be associated to different number keys.
You see a checkmark before each number key that is
assigned to an entry. If the checkmark is before Empty,
you have not assign a number key to the entry.
If a number key is assigned to an entry in a particular
mode, this feature is not supported when you long
press the number key in another mode.
See Making a Group, Private or All Call with the
Programmable Number Key on page 32 for details on making
a Group, Private or All Call with the programmed number
key(s).
Removing the Association between Entry and
Programmable Number Key
Procedure:
Long press the programmed number key to the required alias or
ID, press c to select, and proceed to Step 4.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Contacts and press c to select. The entries
are alphabetically sorted.
Advanced Features
3 ^ or v to the required alias or ID and press c to select.
52
English
4 ^ or v to Program Key and press c to select.
5 ^ or v to Empty and press c to select.
6 The first line of the display shows Clear from all keys?.
7 ^ or v to Yes and press c to select.
8 The radio sounds a positive indicator tone and the display
shows positive mini notice.
9 The screen automatically returns to the previous menu.
NOTE: When an entry is deleted, the association between the
entry and its programmed number key(s) is removed.
Setting Default Contact
Call Indicator Settings
Follow the procedure below.
1 c to access the menu.
Activating and Deactivating Call Ringers for Call
Alert
2 ^ or v to Contacts and press c to select.
You can select, or turn on or off ringing tones for a received Call
Alert.
3 ^ or v to the required alias or ID and press c to select.
Procedure:
4 ^ or v to Set as Default and press c to select.
1 c to access the menu.
5 The radio sounds a positive indicator tone and the display
2 ^ or v to Utilities and press c to select.
shows positive mini notice.
6 A 9 appears beside the selected default alias or ID.
3 ^ or v to Radio Settings and press c to select.
Advanced Features
Procedure:
4 ^ or v to Tones/Alerts and press c to select.
5 ^ or v to Call Ringers and press c to select.
6 ^ or v to Call Alert and press c to select. The current
tone is indicated by a 9.
7 ^ or v to the required tone and press c to select. 9
appears beside selected tone.
NOTE: At Step 6, you can also use < or > to change the
selected option.
53
English
Activating and Deactivating Call Ringers for
Advanced Features
Private Calls
Activating and Deactivating Call Ringers for
Selective Call
You can turn on or off the ringing tones for a received Private
Call.
You can select, or turn on or off ringing tones for a received
Selective Call.
Procedure:
Procedure:
1 c to access the menu.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Tones/Alerts and press c to select.
4 ^ or v to Tones/Alerts and press c to select.
5 ^ or v to Call Ringers and press c to select.
5 ^ or v to Call Ringers and press c to select.
6 ^ or v to Private Callc.
6 ^ or v to Selective Call and press c to select. The
7 Press c to enable Private Call ringing tones. The display
shows 9 beside Enabled.
OR
Press c to disable Private Call ringing tones. The 9
disappears from beside Enabled.
NOTE: At Step 6, you can also use < or > to change the
selected option.
54
English
current tone is indicated by a 9.
7 ^ or v to the required tone and press c to select. 9
appears beside selected tone.
NOTE: At Step 6, you can also use < or > to change the
selected option.
Activating and Deactivating Call Ringers for Text
Message
Activating and Deactivating Call Ringers for
Telemetry Status with Text
You can turn on or off the alert tones for a received Telemetry
Status with Text.
Procedure:
Procedure:
1 c to access the menu.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Tones/Alerts and press c to select.
4 ^ or v to Tones/Alerts and press c to select.
5 ^ or v to Call Ringers and press c to select.
5 ^ or v to Call Ringers and press c to select.
6 ^ or v to Messages and press c to select. The current
6 ^ or v to Telemetry and press c to select. The current
tone is indicated by a 9.
7 ^ or v to the required tone and press c to select. 9
appears beside selected tone.
NOTE: At Step 6, you can also use < or > to change the
selected option.
Advanced Features
You can select, or turn on or off the ringing tones for a received
Text Message.
tone is indicated by a 9.
7 ^ or v to the required tone and press c to select. 9
appears beside selected tone.
NOTE: At Step 6, you can also use < or > to change the
selected option.
55
English
Assigning Ring Styles
Escalating Alarm Tone Volume
You can program your radio to sound one of ten predefined
ringing tones when receiving a Call Alert or a Text Message
from a particular contact.
You can program your radio to continually alert you when a
radio call remains unanswered. This is done by automatically
increasing the alarm tone volume over time. This feature is
known as Escalert.
Procedure:
1 c to access the menu.
2 ^ or v to Contacts and press c to select.The entries
Advanced Features
are alphabetically sorted.
Procedure:
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to the required alias or ID and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Edit and press c to select.
4 ^ or v to Tones/Alerts and press c to select.
5 Press c until display shows Edit Ringtone menu.
5 ^ or v to Escalert.
6 A 9 indicates the current selected tone.
6 Press c to enable Escalert. The display shows 9 beside
7 ^ or v to the required tone and press c to select. 9
appears beside selected tone.
8 The display shows a positive mini notice.
The radio sounds out each ring style as you navigate through
the list.
56
English
Enabled.
OR
Press c to disable Escalert. The 9 disappears from
beside Enabled.
NOTE: At Step 5, you can also use < or > to change the
selected option.
Call Log Features
You can perform the following tasks in each of your call lists:
• Store ID to Contacts
Procedure:
1 c to access the menu.
2 ^ or v to Call Log and press c to select.
3 ^ or v to the required list and press c to select.
• Delete
4 ^ or v to the required alias or ID and press c to select.
• View Details
5 ^ or v to Store and press c to select.
Viewing Recent Calls
The lists are Missed, Answered, and Outgoing.
Procedure:
1 c to access the menu.
6 A blinking cursor appears. If needed, key in the alias for that
ID and press c.
Advanced Features
Your radio keeps track of all recent outgoing, answered, and
missed Private Calls. Use the call log feature to view and
manage recent calls.
Storing an Alias or ID from a Call List
7 The display shows positive mini notice.
You can also store an ID without an alias.
2 ^ or v to Call Log and press c to select.
3 ^ or v to required list and press c to select.
4 The display shows the most recent entry at the top of the
list.
5 ^ or v to view the list.
Press the PTT button to start a Private Call with the current
selected alias or ID.
57
English
Deleting a Call from a Call List
Viewing Details from a Call List
Procedure:
Procedure:
1 c to access the menu.
1 c to access the menu.
2 ^ or v to Call Log and press c to select.
2 ^ or v to Call Log and press c to select.
3 ^ or v to the required list and press c to select.
3 ^ or v to the required list and press c to select.
4 ^ or v to the required alias or ID and press c to select.
4 ^ or v to the required alias or ID and press c to select.
5 ^ or v to Delete and press c to select.
5 ^ or v to View Details and press c to select. Display
6 Press c to select Yes to delete the entry. The display
Advanced Features
shows positive mini notice.
OR
^ or v to No to return to the previous screen.
When you select a call list and it contains no entries, the display
shows List Empty, and sounds a low tone if Keypad Tones are
turned on (see Turning Keypad Tones On or Off on page 97).
58
English
shows details.
Call Alert Operation
This feature is applicable for subscriber aliases or IDs only and
is accessible through the menu via Contacts or manual dial.
Receiving and Responding to a Call Alert
When you receive a Call Alert page, you see the notification list
listing a Call Alert with the alias or ID of the calling radio on the
display.
Procedure:
Procedure:
1 c to access the menu.
2 ^ or v to Contacts and press c to select.
3 ^ or v to the required subscriber alias or ID and press c
to select.
OR
^ or v to Manual Dial and press c to select.
A blinking cursor appears. Enter the subscriber ID you want
to page and press c.
1 You hear a repetitive tone. The LED blinks yellow.
4 ^ or v to Call Alert and press c to select.
2 Press the PTT button while the display still shows the Call
5 The display shows Call Alert and the subscriber alias or
Alert in the Notification List to respond with a Private Call.
OR
Press d to exit the Notification List. The alert is moved to
the Missed Call Log.
See Notification List on page 96 for details about the
Notification List.
See Call Log Features on page 57 for details about the Missed
Call List.
Advanced Features
Call Alert paging enables you to alert a specific radio user to call
you back when they are able to do so.
Making a Call Alert from the Contacts List
ID, indicating that the Call Alert has been sent.
6 The LED lights up solid green when your radio is sending
the Call Alert.
7 If the Call Alert acknowledgement is received, the display
shows positive mini notice.
OR
If the Call Alert acknowledgement is not received, the
display shows negative mini notice.
59
English
Making a Call Alert with the One Touch Access
Emergency Operation
Button
Procedure:
1 Press the programmed One Touch Access button to make
a Call Alert to the predefined alias or ID.
2 The display shows Call Alert and the subscriber alias or
ID, indicating that the Call Alert has been sent.
3 The LED lights up solid green when your radio is sending
the Call Alert.
Advanced Features
4 If the Call Alert acknowledgement is received, the display
shows positive mini notice.
OR
If the Call Alert acknowledgement is not received, the
display shows negative mini notice.
An Emergency Alarm is used to indicate a critical situation. You
are able to initiate an Emergency at any time on any screen
display even when there is activity on the current channel.
Your dealer can set the duration of a button press for the
programmed Emergency button, except for long press, which is
similar with all other buttons:
• Short press – Between 0.05 seconds and 0.75 seconds
• Long press – Between 1.00 second and 3.75 seconds
The Emergency button is assigned with the Emergency On/Off
feature. Check with your dealer for the assigned operation of
the Emergency button.
If short press the Emergency button is assigned to turn on the
Emergency mode, then long press the Emergency button is
assigned to exit the Emergency mode.
If long press the Emergency button is assigned to turn on the
Emergency mode, then short press the Emergency button is
assigned to exit the Emergency mode.
Your radio supports three Emergency Alarms:
• Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
60
English
In addition, each alarm has the following types:
• Regular – Radio transmits an alarm signal and shows audio
To revisit the Alarm List, press c to access the menu and
select Alarm List.
• Silent – Radio transmits an alarm signal without any audio or
visual indicators. Radio receives calls without any sound
through the radio’s speaker, until you press the PTT button to
initiate the call.
• Silent with Voice – Radio transmits an alarm signal without
any audio or visual indicators, but allow incoming calls to
sound through the radio’s speaker.
Only ONE of the Emergency Alarms above can be assigned to
the programmed Emergency button.
When your radio receives an Emergency Alarm, it displays the
Emergency Alarm received indications until acknowledgement
is sent (if enabled) and you exit the Emergency mode.
You will not be able to receive any other indications or displays
for any other calls until you exit the Emergency Alarm received
screen.
The Emergency icon appears on the status bar if there are
undeleted emergency alarms in the Alarm List.
Receiving an Emergency Alarm
NOTE:
Procedure:
When your radio receives an Emergency Alarm, and you
change the radio channel, the Emergency Alarm list is hidden.
The new channel displays the Emergency icon and the LED
blinks red. When you change the radio channel back to the
previous channel, it also displays the Emergency icon and the
LED blinks red.
1 The emergency icon appears, a tone sounds, the LED
blinks red, and the radio displays the Alarm List if there is
more than one alarm listed. The emergency caller aliases
are listed. ^ or v to the required alias and press c to
view more details. Press c again to view your action
options.
OR
The emergency icon appears, a tone sounds, the LED
blinks red, and the radio displays the emergency caller alias
Press c to view more details. Press c again to view your
action options.
Advanced Features
and/or visual indicators.
2 Press d and select Yes to exit the Alarm List.
61
English
Responding to an Emergency Alarm
Procedure:
When receiving an Emergency Alarm:
1 In the Alarm List, ^ or v to the required alias.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is now
available for use.
Advanced Features
3 Press PTT button to transmit non-emergency voice to the
same group that the Emergency Alarm was targeted to. The
LED lights up solid green. Your radio remains in the
Emergency mode.
62
English
4 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
5 Release the PTT button to listen. When the emergency
initiating radio responds, the LED blinks green. You see the
Group Call icon, the group ID, and transmitting radio ID on
your display.
6 Your radio displays the Alarm List.
Emergency voice can only be transmitted by the emergency
initiating radio. All other radios (including the emergency
receiving radio) transmit non-emergency voice.
Sending an Emergency Alarm with Call
This feature allows you to send an Emergency Alarm, a
non-voice signal, which triggers an alert indication on a group of
radios.
This feature allows you to send an Emergency Alarm to a group
of radios. Upon acknowledgement by a radio within the group,
the group of radios can communicate over a programmed
Emergency channel.
Procedure:
1 Press the programmed Emergency On button.
2 The display shows Tx Alarm and the destination alias. The
LED lights up solid green and the Emergency icon appears.
OR
The display shows Tx Telegram and the destination
alias. The LED lights up solid green and the Emergency icon
appears.
3 When an Emergency Alarm acknowledgment is received,
the Emergency tone sounds and the LED blinks green. The
display shows Alarm Sent.
OR
If your radio does not receive an Emergency Alarm
acknowledgement, and after all retries have been
exhausted, a tone sounds and the display shows Alarm
Failed.
4 Radio exits the Emergency Alarm mode and returns to the
Home screen.
If your radio is set to Silent, it will not display any audio or visual
indicators during Emergency mode.
Procedure:
1 Press the programmed Emergency On button.
2 The display shows Tx Alarm and the destination alias. The
LED lights up solid green and the Emergency icon appears.
OR
The display shows Tx Telegram and the destination
alias. The LED lights up solid green and the Emergency icon
appears.
Advanced Features
Sending an Emergency Alarm
3 When an Emergency Alarm acknowledgment is received,
the Emergency tone sounds and the LED blinks green. The
display shows Alarm Sent.
4 Your radio enters the emergency call mode when the
display shows Emergency and the destination group alias.
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
6 Press PTT button to make the call. The LED lights up solid
green and the group icon appears on the display.
63
English
7 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
8 Release the PTT button to listen.
When you receive a group call, the display shows the caller
alias and group alias.
Advanced Features
9 When the channel is free for you to respond, a short alert
tone sounds (
if the Channel Free Indication feature is
enabled). Press the PTT button to respond.
OR
Once your call ends, press Emergency Off button to exit
the Emergency mode.
10 The radio returns to the Home screen.
Sending an Emergency Alarm with Voice to
Follow
This feature allows you to send an Emergency Alarm to a group
of radios. Your radio’s microphone is automatically activated,
allowing you to communicate with the group of radios without
pressing the PTT button.
This activated microphone state is also known as “hot mic”.
If you press the PTT button during the programmed hot mic
transmission period, the radio ignores the PTT press and
remains in Emergency mode.
NOTE: If you press the PTT button during hot mic, and
continue to press it after the hot mic duration expires,
the radio continues to transmit until you release the
PTT button.
Procedure:
If your radio is set to Silent, it will not display any audio or visual
indicators during Emergency mode, or allow any received calls
to sound through the radio’s speaker, until you press the PTT
button to initiate the call.
If your radio is set to Silent with Voice, it will not display any
audio or visual indicators during Emergency mode, but allow
incoming calls to sound through the radio’s speaker. The
indicators will only appear once you press the PTT button to
initiate, or respond to, the call.
64
English
1 Press the programmed Emergency On button.
2 The display shows Tx Alarm and the destination alias. The
LED lights up solid green and the Emergency icon appears.
OR
The display shows Tx Telegram and the destination
alias. The LED lights up solid green and the Emergency icon
appears.
3 Once the display shows Alarm Sent, speak clearly into the
microphone. When hot mic has been enabled, the radio
automatically transmits without a PTT press until the hot mic
duration expires.
Emergency icon appears.
5 Once the hot mic duration expires, the radio automatically
stops transmitting. To transmit again, press the PTT button.
6 Press Emergency Off button to exit the Emergency mode.
7 The radio returns to the Home screen.
If your radio is set to Silent, it will not display any audio or
visual indicators during Emergency mode, or allow any
received calls to sound through the radio’s speaker, until the
programmed hot mic transmission period is over, and you
press the PTT button.
NOTE: This feature is only applicable to the radio sending the
Emergency Alarm.
There are two instances where this can happen:
• You change the channel while the radio is in Emergency
mode. This exits the Emergency mode. If Emergency Alarm
is enabled on this new channel, the radio reinitiates
Emergency.
• You press the programmed Emergency On button during an
Emergency initiation/transmission state. This causes the
radio to exit this state, and to reinitiate Emergency.
Advanced Features
4 While transmitting, the LED lights up solid green and the
Reinitiating an Emergency Mode
If your radio is set to Silent with Voice, it will not display any
audio or visual indicators during Emergency mode when you
are making the call with hot mic, but allow sound through the
radio’s speaker when the target radio responds after the
programmed hot mic transmission period is over. The
indicators will only appear when you press the PTT button.
NOTE: If the Emergency Alarm request fails, the radio does
not retry to send the request, and enters the hot mic
state directly.
65
English
Exiting Emergency Mode
NOTE: This feature is only applicable to the radio sending the
Emergency Alarm.
Your radio exits Emergency mode when one of the following
occurs:
• Emergency Alarm acknowledgement is received (for
Emergency Alarm only), OR
•
An Emergency Exit Telegram is received, OR
• All retries to send the alarm have been exhausted, OR
Advanced Features
• The Emergency Off button is pressed.
NOTE: If your radio is powered off, it exits the Emergency
mode. The radio will not reinitiate the Emergency mode
automatically when it is turned on again.
66
English
If you change channels when your radio is in
Emergency mode to a channel that has no emergency
system configured, No Emergency is shown on your
display.
Text Message Features
Your radio is able to receive data, for example a text message,
from another radio or an e-mail application.
The maximum length of characters for a text message,
including the subject line (seen when receiving message from
an e-mail application), is 280.
The radio exits the current screen once the inactivity timer
expires. Any text message in the writing/editing screen will
automatically be saved to the Drafts folder.
NOTE: Long press d at any time to return to the Home
screen.
Writing and Sending a Text Message
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Messages and press c to select.
3 ^ or v to Compose and press c to select.
4 A blinking cursor appears.
Use the keypad to type your message.
Press < to move one space to the left.
Press > or the # key to move one space to the right.
Press the *DEL key to delete any unwanted characters.
5 Press c once message is composed.
6 ^ or v to the required alias or ID and press c to select.
OR
^ or v to Manual
Dial and press c to select.
Key in the subscriber ID and press c.
OR
d to edit the message.
d again to discard the message or save it to the Drafts
folder.
7 The display shows transitional mini notice, confirming your
message is being sent.
8 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
67
English
If the text message fails to send, the radio returns you to the
Resend option screen (see Managing Fail-to-Send Text
Messages on page 71).
Sending a Quick Text Message
6 Press c once message is composed.
7 ^ or v to the required alias or ID and press c to select.
OR
^ or v to Manual
Dial and press c to select.
Your radio supports a maximum of 50 Quick Text messages as
programmed by your dealer.
Key in the subscriber alias or ID and press c.
OR
While Quick Text messages are predefined, you can edit each
message before sending it.
d to edit the message.
d again to discard the message or save it to the Drafts
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
folder.
1 c to access the menu.
2 ^ or v to Messages and press c to select.
3 ^ or v to Quick Text and press c to select.
4 ^ or v to the required Quick Text and press c to select.
5 A blinking cursor appears.
Use the keypad to edit the message, if required.
Press < to move one space to the left.
Press > or the # key to move one space to the right.
Press the *DEL key to delete any unwanted characters.
68
English
8 The display shows transitional mini notice, confirming your
message is being sent.
9 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
If the text message fails to send, the radio returns you to the
Resend option screen (see Managing Fail-to-Send Text
Messages on page 71).
Sending a Quick Text Message with the One Touch
Access Button
Procedure:
1 Press the programmed One Touch Access button to send
a predefined Quick Text message to a predefined alias or
ID.
2 The display shows transitional mini notice, confirming your
message is being sent.
3 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Accessing the Drafts Folder
You can save a text message to send it at a later time.
If a PTT button press or a mode change causes the radio to exit
the text message writing/editing screen while you are in the
process of writing or editing a text message, your current text
message is automatically saved to the Drafts folder.
The most recent saved text message is always added to the top
of the Drafts list.
The Drafts folder stores a maximum of ten (10) last saved
messages. When the folder is full, the next saved text message
automatically replaces the oldest text message in the folder.
NOTE: Long press d at any time to return to the Home
screen.
If the text message fails to send, the radio returns you to the
Resend option screen (see Managing Fail-to-Send Text
Messages on page 71).
69
English
Viewing a Saved Text Message
Editing and Sending a Saved Text Message
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
Procedure:
1 c to access the menu.
2 ^ or v to Messages and press c to select.
3 ^ or v to Drafts and press c to select.
4 ^ or v to the required message and press c to select.
1 Press c again while viewing the message.
2 ^ or v to Edit and press c to select.
A blinking cursor appears.
Use the keypad to edit your message.
Press < to move one space to the left.
Press > or the # key to move one space to the right.
Press the *DEL key to delete any unwanted characters.
Press c once message is composed.
3 ^ or v to the required alias or ID and press c to select.
OR
^ or v to Manual
Dial and press c to select.
Key in the subscriber alias or ID and press c.
4 The display shows transitional mini notice, confirming your
message is being sent.
70
English
5 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Managing Fail-to-Send Text Messages
You can select one of the following options while at the Resend
option screen:
• Resend
If the text message fails to send, it is moved to the Sent Items
folder and marked with a Send Failed icon.
• Forward
Deleting a Saved Text Message from Drafts
NOTE: If the channel type (i.e. conventional digital or Capacity
Plus) is not a match, you can only edit and forward a
Fail-to-Send message.
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Messages and press c to select.
3 ^ or v to Drafts and press c to select.
4 ^ or v to the required message and press c to select.
5 Press c again while viewing the message.
• Edit
Resending a Text Message
Procedure:
1 Press c to resend the same message to the same
subscriber/group alias or ID.
2 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
6 ^ or v to Delete and press c to delete the text
message.
71
English
Forwarding a Text Message
Editing a Text Message
Select Forward to send the message to another subscriber/
group alias or ID.
Select Edit to edit the message before sending it.
Procedure:
NOTE: If a subject line is present (for messages received from
an e-mail application), you cannot edit it.
1 ^ or v to Forward and press c to select.
Procedure:
2 ^ or v to the required alias or ID and press c to select.
1 ^ or v to Edit and press c to select.
OR
^ or v to Manual
Dial and press c to select.
Key in the subscriber ID and press c.
3 The display shows transitional mini notice, confirming your
message is being sent.
4 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
2 A blinking cursor appears.
Use the keypad to edit your message.
Press < to move one space to the left.
Press > or the # key to move one space to the right.
Press the *DEL key to delete any unwanted characters.
3 Press c once message is composed.
4 ^ or v to Send and press c to send the message.
OR
^ or v to Save and press c to save the message to the
Drafts folder.
OR
d to edit the message.
d again to delete the message or save it to the Drafts
folder.
72
English
5 ^ or v to the required alias or ID and press c to select.
OR
^ or v to Manual
Dial and press c to select.
Key in the subscriber ID and press c.
6 The display shows transitional mini notice, confirming your
message is being sent.
7 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Managing Sent Text Messages
Once a message is sent to another radio, it is saved in Sent
Items. The most recent sent text message is always added to
the top of the Sent Items list.
The Sent Items folder is capable of storing a maximum of
thirty (30) last sent messages. When the folder is full, the next
sent text message automatically replaces the oldest text
message in the folder.
NOTE: Long press d at any time to return to the Home
screen.
73
English
Viewing a Sent Text Message
Sending a Sent Text Message
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
You can select one of the following options while viewing a sent
text message:
1 c to access the menu.
• Edit
2 ^ or v to Messages and press c to select.
• Delete
3 ^ or v to Sent Items and press c to select.
NOTE: If the channel type (i.e. conventional digital or Capacity
Plus) is not a match, you can only edit, forward, or
delete a Sent message.
4 ^ or v to the required message and press c to select.
A subject line may be shown if the message is from an
e-mail application.
The icon beside each message indicates the status of the
message (see Sent Item Icons on page 18).
• Resend
• Forward
Procedure:
1 Press c again while viewing the message.
2 ^ or v to Resend and press c to select.
3 The display shows transitional mini notice, confirming that
the same message is being sent to the same target radio.
4 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
74
English
If the message fails to send, the radio returns you to the Resend
option screen. Press c to resend the message to the same
subscriber/group alias or ID.
NOTE: Changing the volume, and pressing any button, except
for c, <, or >, returns you to the message.
The radio exits the Resend option screen if you press
the PTT button to initiate a Private or Group Call, or to
respond to a Group Call. The radio also exits the
screen when it receives a text or telemetry message,
an emergency call or alarm, or a call alert.
The display returns to the Resend option screen if you
press the PTT button to respond to a Private Call
(except when the radio is displaying the Missed Call
screen), and at the end of an All Call.
Press ^ or v to access the Forward, Edit, or Delete option
screen:
• Select Forward to send the selected text message to another
subscriber/group alias or ID (see Forwarding a Text
Message on page 72).
• Select Edit to edit the selected text message before sending
it (see Editing a Text Message on page 72).
• Select Delete to delete the text message.
NOTE: If you exit the message sending screen while the
message is being sent, the radio updates the status of
the message in the Sent Items folder without providing
any indication in the display or via sound.
If the radio changes mode or powers down before the
status of the message in Sent Items is updated, the
radio cannot complete any In-Progress messages and
automatically marks it with a Send Failed icon.
The radio supports a maximum of five (5) In-Progress
messages at one time. During this period, the radio
cannot send any new message and automatically
marks it with a Send Failed icon.
Deleting All Sent Text Messages from Sent Items
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Messages and press c to select.
3 ^ or v to Sent Items and press c to select.
4 ^ or v to Delete All and press c to select.
5 ^ or v to Yes and press c to select. The display shows
positive mini notice
OR
75
English
^ or v to No and press c to return to the previous
Receiving a Text Message
screen.
When your radio receives a message, the display shows the
Notification List with the alias or ID of the sender and the
message icon .
When you select Sent Items and it contains no text messages,
the display shows List Empty, and sounds a low tone if
Keypad Tones are turned on (see Turning Keypad Tones On
or Off on page 97).
You can select one of the following options when receiving a
text message:
• Read
• Read Later
• Delete
NOTE: The radio exits the Text Message alert screen and sets
up a Private or Group Call to the sender of the
message if the PTT button is pressed when the radio is
displaying the alert screen.
Reading a Text Message
Procedure:
1 ^ or v to Read? and press c to select.
2 Selected message in the Inbox opens.
A subject line may be shown if the message is from an
e-mail application.
3 Press d to return to the Inbox.
OR
76
English
Press c to reply, forward, or delete the text message.
Press ^ or v to access the Read Later or Delete option
screen:
Procedure:
• Select Read Later to return to the screen you were on prior
1 c to access the menu.
to receiving the text message.
• Select Delete to delete the text message.
Managing Received Text Messages
Use the Inbox to manage your text messages. The Inbox is
capable of storing a maximum of 30 messages.
Your radio supports the following options for text messages:
• Reply
• Forward
• Delete
Viewing a Text Message from the Inbox
2 ^ or v to Messages and press c to select.
3 ^ or v to Inbox and press c to select.
4 ^ or v to view the messages.
A subject line may be shown if the message is from an
e-mail application.
5 Press c to select the current message, and press c
again to reply, forward, or delete that message.
OR
Long press d to return to the Home screen.
• Delete All
NOTE: If the channel type (i.e. conventional digital or Capacity
Plus) is not a match, you can only forward, delete, or
delete all Received messages.
Viewing a Telemetry Status Text Message from the
Text messages in the Inbox are sorted according to the most
recently received.
Procedure:
NOTE: Long press d at any time to return to the Home
screen.
2 ^ or v to Messages and press c to select.
Inbox
1 c to access the menu.
3 ^ or v to Inbox and press c to select.
77
English
4 ^ or v to the required message and press c to select.
5 The display shows Telemetry: .
6 Long press d to return to the Home screen.
You cannot reply to a Telemetry Status text message.
Replying to a Text Message from the Inbox
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Messages and press c to select.
3 ^ or v to Inbox and press c to select.
4 ^ or v to the required message and press c to select.
A subject line may be shown if the message is from an
e-mail application.
5 Press c once more to access the sub-menu.
6 ^ or v to Reply and press c to select.
OR
78
^ or v to Quick
English
Reply and press c to select.
A blinking cursor appears. Use the keypad to edit your
message, if required.
7 Press c once message is composed.
8 The display shows transitional mini notice, confirming your
message is being sent.
9 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
If the message fails to send, the radio returns you to the Resend
option screen (see Managing Fail-to-Send Text Messages on
page 71).
Deleting a Text Message from the Inbox
Deleting All Text Messages from the Inbox
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
1 c to access the menu.
1 c to access the menu.
2 ^ or v to Messages and press c to select.
2 ^ or v to Messages and press c to select.
3 ^ or v to Inbox and press c to select.
4 ^ or v to the required message and press c to select.
A subject line may be shown if the message is from an
e-mail application.
5 Press c once more to access the sub-menu.
6 ^ or v to Delete and press c to select.
7 ^ or v to Yes and press c to select.
3 ^ or v to Inbox and press c to select.
4 ^ or v to Delete All and press c to select.
5 ^ or v to Yes and press c to select.
6 The display shows positive mini notice.
When you select the Inbox and it contains no text messages,
the display shows List Empty, and sounds a low tone if
Keypad Tones are turned on (see Turning Keypad Tones On
or Off on page 97).
8 The display shows positive mini notice.
9 The screen returns to the Inbox.
79
English
Analog Message Encode
Your radio is able to send preprogrammed messages from the
Message list to a radio alias or to the dispatcher.
Sending MDC Message Encode to Dispatcher
Procedure:
1 ^ or v to Message and press c to select.
2 ^ or v to Quick Text and press c to select.
3 ^ or v to the required message. Press c to send.
4 The display shows transitional mini notice, confirming your
message is being sent.
5 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Sending 5-Tone Message Encode to Contact
Procedure:
1 ^ or v to Message and press c to select.
2 ^ or v to Quick Text and press c to select.
80
English
3 ^ or v to the required message. Press c to select.
4 ^ or v to the required contact. Press c to select.
5 The display shows transitional mini notice, confirming your
message is being sent.
6 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Analog Status Update
For 5-Tone systems, see Setting Default Contact on page 53
for details on setting the default contact.
Your radio is able to send preprogrammed messages from the
Status List indicating your current activity to a radio contact (for
5-Tone systems) or to the dispatcher (for MDC systems).
For 5-Tone systems, a PTT button press while in the status list
sends the selected status update and returns to the Home
screen to initiate a voice call.
The last acknowledged message is kept at the top of the Status
List. The other messages are arranged in alphanumeric order.
Viewing 5-Tone Status Details
Sending Status Update to Predefined Contact
Procedure:
1 ^ or v to Status and press c to select.
2 ^ or v to the required status. Press c to select.
3 ^ or v to Set as Default. Press c to send the status
update.
4 The display shows transitional mini notice, confirming your
status update is being sent.
5 If the status update is acknowledged, a tone sounds and the
display shows positive mini notice. A 9 appears beside the
acknowledged status.
OR
If the status update is not acknowledged, a low tone sounds
and the display shows negative mini notice. A 9 remains
beside the previous status.
Procedure:
1 ^ or v to Status and press c to select.
2 ^ or v to the required status. Press c to select.
3 ^ or v to View Details. Press c to select.
4 The display shows details of the selected status.
Editing 5-Tone Status Details
Procedure:
1 ^ or v to Status and press c to select.
2 ^ or v to the required status. Press c to select.
3 ^ or v to Edit. Press c to select.
4 A blinking cursor appears.
Use the keypad to edit the status details.
Press < to move one space to the left.
Press > or the # key to move one space to the right.
81
English
Press the *DEL key to delete any unwanted characters.
Press c once editing is complete.
5 The display shows Status Saved.
6 Radio returns to Status List.
Privacy
If enabled, this feature helps to prevent eavesdropping by
unauthorized users on a channel by the use of a softwarebased scrambling solution. The signaling and user identification
portions of a transmission are not scrambled.
Your radio must have privacy enabled on the channel to send a
privacy-enabled transmission, although this is not a necessary
requirement for receiving a transmission. While on a privacyenabled channel, the radio is still able to receive clear
(unscrambled) transmissions.
Your radio supports two types of privacy:
• Basic Privacy
• Enhanced Privacy.
Only ONE of the privacy types above can be assigned to the
radio.
To unscramble a privacy-enabled call or data transmission, your
radio must be programmed to have the same Privacy Key (for
Basic Privacy), OR the same Key Value and Key ID (for
Enhanced Privacy) as the transmitting radio.
If your radio receives a scrambled call that is of a different
Privacy Key, OR a different Key Value and Key ID, you will
either hear a garbled transmission (Basic Privacy) or nothing at
all (Enhanced Privacy).
82
English
The LED lights up solid green while the radio is transmitting and
double blinks green when the radio is receiving an ongoing
privacy-enabled transmission.
If the radio has a privacy type assigned, the secure or unsecure
icon appears on the status bar, except when the radio is
sending or receiving an Emergency call or alarm.
NOTE: Some radio models may not offer this Privacy feature.
Check with your dealer or system administrator for
more information.
NOTE: At Step 4, you can also use < or > to change the
selected option.
Procedure:
Press the programmed Privacy button to toggle privacy on or
off.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Privacy.
6 Press c to enable Privacy. The display shows 9 beside
Enabled.
OR
Press c to disable Privacy. The 9 disappears from beside
Enabled.
83
English
Dual Tone Multi Frequency (DTMF)
IP Site Connect
The Dual Tone Multi Frequency (DTMF) feature allows the radio
to operate in a radio system with an interface to telephone
systems.
This feature allows your radio to extend communication beyond
the reach of a single site, by connecting to different available
sites via an Internet Protocol (IP) network.
Procedure:
NOTE: This feature is not applicable in Capacity Plus.
To initiate a DTMF call.
When the radio moves out of range from one site and into the
range of another, it connects to the new site's base station to
send or receive calls/data transmissions. Depending on your
settings, this is done automatically or manually.
1 Press and hold the PTT button.
2 Enter the desired number, * or #.
You can turn off the DTMF tone by disabling all radio tones and
alerts (see Turning the Radio Tones/Alerts On or Off on
page 96).
If the radio is set to do this automatically, it scans through all
available sites when the signal from the current site is weak or
when the radio is unable to detect any signal from the current
site. It then locks on to the base station with the strongest
Received Signal Strength Indicator (RSSI) value.
In a manual site search, the radio searches for the next site in
the roam list that is currently in range (but which may not have
the strongest signal) and locks on to it.
NOTE: Each channel can only have either Scan or Roam
enabled, not both at the same time.
Channels with this feature enabled can be added to a particular
roam list. The radio searches the channel(s) in the Members list
during the automatic roam operation to locate the best site.
84
English
A Members list supports a maximum of 16 channels (including
the Selected Channel).
NOTE: You cannot manually add or delete an entry to the
Members list. Check with your dealer or system
administrator for more information.
Starting an Automatic Site Search
NOTE: The radio only scans for a new site if the current signal
is weak or when the radio is unable to detect any signal
from the current site. If the RSSI value is strong, the
radio remains on the current site.
Procedure:
Press the programmed Site Lock On/Off button.
1 A tone sounds and the display shows Site Unlocked.
2 The LED blinks yellow rapidly when the radio is actively
searching for a new site, and turns off once the radio locks
on to a site.
3 The display shows the channel alias and the site roaming
icon appears.
Procedure:
Use the menu.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Site Roaming and press c to select.
5 ^ or v to Unlock Site and press c to select. A tone
sounds and the display shows Site Unlocked.
6 The radio returns to the Home screen. The display shows
the channel alias and the site roaming icon appears.
7 The LED blinks yellow rapidly when the radio is actively
searching for a new site, and turns off once the radio locks
on to a site.
The radio also performs an automatic site search (site is
unlocked) during a PTT button press or data transmission if
the current channel, an IP Site Select channel with an
attached roam list, is out of range.
OR
85
English
Stopping an Automatic Site Search
When the radio is actively searching for a new site:
Procedure:
Press the programmed Site Lock On/Off button.
1 A tone sounds and the display shows Site Locked.
2 The LED turns off and the display shows the channel alias.
OR
Procedure:
Use the menu.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Site Roaming and press c to select.
5 ^ or v to Lock Site State. c
6 Press c to lock site. The display shows 9 beside Enabled.
OR
Press c to unlock site. The 9 disappears from beside
Enabled. The LED turns off and the radio returns to the
Home screen. The display shows the channel alias.
86
English
NOTE: At Step 5, you can also use < or > to change the
selected option.
Starting a Manual Site Search
Procedure:
Press the programmed Manual Site Roam button and proceed
to Step 6.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Site Roaming and press c to select.
Security
You can enable or disable any radio in the system. For example,
you might want to disable a stolen radio, to prevent the thief
from using it, and enable that radio, when it is recovered.
NOTE: Performing Radio Disable and Enable is limited to
radios with these functions enabled. Check with your
dealer or system administrator for more information.
Radio Disable
Procedure:
Use the programmed Radio Disable button.
5 ^ or v to Active Search and press c to select.
1 Press the programmed Radio Disable button.
6 A tone sounds and the display shows Finding Site.
2 ^ or v to the required alias or ID and press c to select.
The LED blinks green.
3 The display shows transitional mini notice, indicating the
request is in progress. The LED blinks green.
7 If a new site is found, a tone sounds and the LED turns off.
The display shows Site Found.
OR
If there is no available site within range, a tone sounds and
the LED turns off. The display shows Out of Range.
OR
If a new site is within range, but the radio is unable to
connect to it, a tone sounds and the LED turns off. The
display shows Channel Busy.
8 The radio returns to the Home screen.
4 Wait for acknowledgment.
5 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
OR
87
English
Radio Enable
Procedure:
Use the menu.
1 c to access the menu.
Procedure:
Use the programmed Radio Enable button.
2 ^ or v to Contacts and press c to select. The entries
1 Press the programmed Radio Enable button.
are alphabetically sorted.
3 ^ or v to the required alias or ID and press c to select.
OR
^ or v to Manual
Dial and press c to select.
Key in the subscriber alias or ID and press c.
4 ^ or v to Radio Disable and press c to select.
2 ^ or v to the required alias or ID and press c to select.
3 The display shows Radio Enable and the subscriber alias
or ID. The LED lights up solid green.
4 Wait for acknowledgment.
5 If successful, the radio sounds a positive indicator tone and
the display shows positive mini notice.
OR
If unsuccessful, the radio sounds a negative indicator tone
and the display shows negative mini notice.
5 The display shows transitional mini notice, indicating the
request is in progress. The LED blinks green.
6 Wait for acknowledgment.
7 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
Do not press d during the Radio Disable operation as you will
not get an acknowledgement message.
OR
Procedure:
Use the menu.
1 c to access the menu.
2 ^ or v to Contacts and press c to select. The entries
are alphabetically sorted.
3 ^ or v to the required alias or ID and press c to select.
OR
88
English
^ or v to Manual
Dial and press c to select.
Key in the subscriber alias or ID and press c.
4 ^ or v to Radio Enable and press c to select.
5 The display shows Radio Enable and the subscriber alias
or ID. The LED lights up solid green.
6 Wait for acknowledgment.
7 If successful, the radio sounds a positive indicator tone and
the display shows positive mini notice.
OR
If unsuccessful, the radio sounds a negative indicator tone
and the display shows negative mini notice.
Do not press d during the Radio Enable operation as you will
not get an acknowledgement message.
Lone Worker
This feature prompts an emergency to be raised if there is no
user activity, such as any radio button press or activation of the
channel selector, for a predefined time.
Following no user activity for a programmed duration, the radio
pre-warns the user via an audio indicator once the inactivity
timer expires.
If there is still no acknowledgment by the user before the
predefined reminder timer expires, the radio initiates an
Emergency Alarm.
Only one of the following Emergency Alarms is assigned to this
feature:
• Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
The radio remains in the emergency state allowing voice
messages to proceed until action is taken. See Emergency
Operation on page 60 on ways to exit Emergency.
NOTE: This feature is limited to radios with this function
enabled. Check with your dealer or system
administrator for more information.
89
English
Password Lock Features
If enabled, this feature allows you to access your radio via
password upon powering up.
Accessing the Radio from Password
Procedure:
Power up the radio.
1 You hear a continuous tone.
2 Enter your current four-digit password with the radio’s
keypad. The display shows ●●●●. Press cto proceed.
OR
Enter your current four-digit password. Press ^ or v to edit
each digit’s numeric value. Press > or c to move to the
next digit. Each digit changes to ●. Press c to confirm
your selection.
You hear a positive indicator tone for every digit pressed.
Press < to remove the each ● on the display. You hear a
negative indicator tone, if you press < when the line is
empty, or if you press more than four digits.
3 If the password is correct:
90
Your radio proceeds to power up. See Powering Up the
Radio on page 5.
English
OR
If the password is incorrect:
The display shows Wrong Password. Repeat Steps 2.
OR
After the third incorrect password, the display shows Wrong
Password and then, shows Radio Locked. A tone sounds
and the LED double blinks yellow.
Your radio enters into locked state for 15 minutes, and responds
to inputs from On/Off/Volume Control Knob and programmed
Backlight Auto button only.
NOTE: The radio is unable to receive any call, including
emergency calls, in locked state.
Unlocking the Radio from Locked State
Procedure:
Wait for 15 minutes. Repeat Steps 1 to 3 in Accessing the
Radio from Password on page 90.
OR
Power up the radio, if you have powered down the radio during
locked state:
1 A tone sounds and the LED double blinks yellow. The
display shows Radio Locked.
2 Wait for 15 minutes. Repeat Accessing the Radio from
Password on page 90.
Your radio restarts the 15 minutes timer for locked state when
you power up.
Turning the Password Lock On or Off
Procedure:
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Passwd Lock and press c to select.
5 Enter your current four-digit password.
See Step 2 in Accessing the Radio from Password on
page 90.
6 If the password is correct:
Press c to enable Password Lock. The display shows 9
beside Enabled.
OR
Press c to disable Password Lock. The 9 disappears from
beside Enabled.
OR
If the password is incorrect:
The display shows Wrong Password and automatically
returns to the previous menu.
NOTE: At Step 6, you can also use < or > to change the
selected option.
91
English
Changing the Password
Procedure:
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Passwd Lock and press c to select.
5 Enter your current four-digit password.
See Step 2 in Accessing the Radio from Password on
page 90.
6 If the password is correct:
^ or v to Change
Pwd and press c to select.
OR
If the password is incorrect:
The display shows Wrong Password and automatically
returns to the previous menu.
7 Enter a new four-digit password. See Step 2 in Accessing
the Radio from Password on page 90.
8 Re-enter the new four-digit password. See Step 2 in
Accessing the Radio from Password on page 90.
9 If both of the new password inputs match:
The display shows Password Changed.
OR
92
English
If both of the new password inputs do not match:
The display shows Passwords Do Not Match.
10 The screen automatically returns to the previous menu.
Bluetooth Operation
This feature allows you to use your radio with a Bluetoothenabled device (accessory) via a Bluetooth connection. Your
radio supports both Motorola and COTS (Commercially
available Off-The-Shelf) Bluetooth-enabled devices.
Bluetooth operates within a range of 10 meters line of sight.
This is an unobstructed path between your radio and your
Bluetooth-enabled device.
It is not recommended that you leave your radio behind and
expect your Bluetooth-enabled device to work with a high
degree of reliability when they are separated.
At the fringe areas of reception, both voice and tone quality will
start to sound "garbled" or "broken". To correct this problem,
simply position your radio and Bluetooth-enabled device closer
to each other (within the 10-meter defined range) to re-establish
clear audio reception. Your radio’s Bluetooth function has a
maximum power of 2.5 mW (4 dBm) at the 10-meter range.
Your radio can support up to 3 simultaneous Bluetooth
connections with Bluetooth-enabled devices of unique types.
For example, a headset, a scanner, and a PTT-Only Device
(POD). Multiple connections with Bluetooth-enabled devices of
the same type are not supported.
Refer to your respective Bluetooth-enabled device’s user
manual for more details on your Bluetooth-enabled device’s full
capabilities.
Turning Bluetooth On or Off
Procedure:
1 c to access the menu.
2 ^ or v to Bluetooth and press c to select.
3 ^ or v to My Status and press c to select.
4 The display shows On and Off. ^ or v to On and press c
to enable Bluetooth. 9 appears beside On. The Bluetooth
icon appears on the status bar.
OR
The display shows On and Off. ^ or v to Off and press
c to disable Bluetooth. 9 appears beside Off.
Finding and Connecting to a Bluetooth Device
Procedure:
1 Turn on your Bluetooth-enabled device and place it in
pairing mode. Refer to respective Bluetooth-enabled
device’s user manual.
1 On your radio, press c to access the menu.
2 ^ or v to Bluetooth and press c to select.
3 ^ or v to Devices and press c to select.
93
English
4 ^ or v to the required device and press c to select.
OR
^ or v to Find Devices to locate available devices.
^ or v to the required device and press c to select.
5 ^ or v to Connect and press c to select. Display shows
Connecting to .
Your Bluetooth-enabled device may require additional steps
to complete the pairing. Refer to respective Bluetoothenabled device’s user manual.
6 If successful, the radio display shows
Connected. A tone sounds and 9 appears beside the
connected device. The Bluetooth Connected icon appears
on the status bar.
OR
If unsuccessful, the radio display shows Connecting
Failed.
Do not turn off your Bluetooth-enabled device or press d
during the finding and connecting operation as this cancels the
operation.
NOTE: If pin code is required, use the same entry method as
Step 2 in Accessing the Radio from Password on
page 90.
94
English
Disconnecting from a Bluetooth Device
Procedure:
1 On your radio, press c to access the menu.
2 ^ or v to Bluetooth and press c to select.
3 ^ or v to Devices and press c to select.
4 ^ or v to the required device and press c to select.
5 ^ or v to Disconnect and press c to select. Display
shows Disconnecting from .
Your Bluetooth-enabled device may require additional steps
to disconnect. Refer to respective Bluetooth-enabled
device’s user manual.
6 The radio display shows Disonnected. A
positive indicator tone sounds and 9 disappears beside the
connected device. The Bluetooth Connected icon
disappears on the status bar.
Switching Audio Route
Editing Device Name
You can toggle audio routing between internal radio speaker
and external Bluetooth-enabled accessory.
You can edit the name of available Bluetooth-enabled devices.
Procedure:
1 c to access the menu.
1 Press the programmed Bluetooth Audio Switch button .
2 A tone sounds and display shows Route Audio to Radio.
OR
A tone sounds and display shows Route Audio to
Bluetooth.
Viewing Device Details
Procedure:
1 c to access the menu.
2 ^ or v to Bluetooth and press c to select.
3 ^ or v to Devices and press c to select.
Procedure:
2 ^ or v to Bluetooth and press c to select.
3 ^ or v to Devices and press c to select.
4 ^ or v to the required device and press c to select.
5 ^ or v to Edit Name and press c to select.
6 A blinking cursor appears.
Use the keypad to type the required zone.
Press < to move one space to the left.
Press > to move one space to the right.
Press the *DEL key to delete any unwanted characters.
7 The display shows Device Name Saved.
4 ^ or v to the required device and press c to select.
5 ^ or v to View Details and press c to select.
95
English
Notification List
Your radio has a Notification List that collects all your “unread”
events on the channel, such as unread text messages,
telegrams, telemetry messages, missed calls, and call alerts.
The Notification icon appears on the status bar when the
Notification List has one or more events.
The list supports a maximum of forty (40) unread events. When
it is full, the next event automatically replaces the oldest event.
After the events are read, they are removed from the
Notification List.
Utilities
Turning the Radio Tones/Alerts On or Off
You can enable and disable all radio tones and alerts (except for
the incoming Emergency alert tone) if needed.
Procedure:
Press the programmed All Tones/Alerts button to toggle all
tones on or off.
OR
Follow the procedure below.
1 c to access the menu.
Accessing the Notification List
2 ^ or v to Utilities and press c to select.
Procedure:
3 ^ or v to Radio Settings and press c to select.
1 c to access the menu.
2 ^ or v to Notification and press c to select.
3 ^ or v to the required event and press c to select.
Long press d to return to the Home screen.
4 ^ or v to Tones/Alerts and press c to select.
5 ^ or v to All Tones and press c to select.
6 Press c to enable all tones. The display shows 9 beside
Enabled.
OR
Press c to disable all tones. The 9 disappears from
beside Enabled.
96
English
NOTE: At Step 5, you can also use < or > to change the
selected option.
Turning Keypad Tones On or Off
You can enable and disable keypad tones if needed.
Procedure:
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Tones/Alerts and press c to select.
5 ^ or v to Keypad Tones and press c to select.
6 Press c to enable keypad tones. The display shows 9
beside Enabled.
OR
Press c to disable keypad tones. The 9 disappears from
beside Enabled.
NOTE: At Step 5, you can also use < or > to change the
selected option.
Setting the Tone Alert Volume Offset Level
You can adjust the Tone Alert Volume Offset level if needed.
This feature adjusts the volume of the tones/alerts, allowing it to
be higher or lower than the voice volume.
Procedure:
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Tones/Alerts and press c to select.
5 ^ or v to Vol. Offset and press c to select.
6 ^ or v to the required volume value. The radio sounds a
feedback tone with each corresponding volume value.
7 Press c to keep the required displayed volume value.
OR
Repeat Step 6 to select another volume value.
OR
d to exit without changing the current volume offset
settings.
97
English
Turning the Talk Permit Tone On or Off
Setting the Power Level
You can enable and disable the Talk Permit Tone if needed.
You can customize your radio’s power setting to high or low for
each channel.
Procedure:
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
Settings: High enables communication with radios located at
a considerable distance from you. Low enables communication
with radios in closer proximity.
5 ^ or v to Talk Permit and press c to select.
Procedure:
Press the programmed Power Level button to toggle transmit
power level between high and low.
OR
Follow the procedure below.
6 Press c to enable Talk Permit Tone. The display shows 9
1 c to access the menu.
4 ^ or v to Tones/Alerts and press c to select.
beside Enabled.
OR
Press c to disable Talk Permit Tone. The 9 disappears
from beside Enabled.
NOTE: At Step 5, you can also use < or > to change the
selected option.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Power and press c to select.
6 ^ or v to the required setting and press c to select. 9
appears beside selected setting.
7 Screen returns to the previous menu.
98
English
Long press d to return to the Home screen. The power level
icon is visible.
NOTE: At Step 4, you can also use < or > to change the
selected option.
Changing the Display Mode
You can change radio’s display mode between Day or Night, as
needed. This affects the color palette of the display.
Procedure:
Press the programmed Display Mode button to toggle the
display mode settings.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Day/Night and press c to select.
Adjusting the Display Brightness
You can adjust radio’s display brightness as needed.
Procedure:
Press the programmed Brightness button and proceed to
Step 5.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Brightness and press c to select.
5 The display shows a progress bar. Decrease display
brightness by pressing < or increase the display brightness
by pressing >. Press c to confirm your entry.
5 The display shows Day Mode and Night Mode. ^ or v to
the required setting and press c to enable. 9 appears
beside selected setting.
NOTE: At Step 4, you can also use < or > to change the
selected option.
99
English
Controlling the Display Backlight
You can enable or disable the radio’s display backlight as
needed. The setting also affects the Menu Navigation Buttons
and keypad backlighting accordingly.
Procedure:
Press the programmed Backlight Auto button to toggle the
backlight settings.
OR
Follow the procedure below.
1 c to access the menu.
NOTE: At Step 4, you can also use < or > to change the
selected option.
Setting the Squelch Level
You can adjust your radio's squelch level to filter out unwanted
calls with low signal strength or channels that have a higher
than normal background noise.
Settings: Normal is the default. Tight filters out (unwanted)
calls and/or background noise. However, calls from remote
locations may also be filtered out.
4 ^ or v to Backlight Auto
Procedure:
Press the programmed Squelch button to toggle squelch level
between normal and tight.
OR
Follow the procedure below.
5 Press c to enable backlight. The display shows 9 beside
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
Enabled.
OR
Press c to disable backlight. The 9 disappears from
beside Enabled.
The display backlight and keypad backlighting are automatically
turned off if the LED indicator is disabled (see Turning the LED
Indicator On or Off on page 102).
10
English
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Squelch and press c to select.
5 The display shows Tight and Normal. ^ or v to the
required setting and press c to enable. 9 appears besides
selected setting.
6 Screen returns to the previous menu.
Locking and Unlocking the Keypad
NOTE: At Step 4, you can also use < or > to change the
selected option.
You can lock your radio’s keypad to avoid inadvertent key entry.
Turning the Introduction Screen On or Off
Procedure:
1 c to access the menu.
You can enable and disable the Introduction Screen if needed.
2 ^ or v to Utilities and press c to select.
Procedure:
3 ^ or v to Radio Settings and press c to select.
1 c to access the menu.
4 ^ or v to Keypad Lock and press c to select.
2 ^ or v to Utilities and press c to select.
5 The display shows Keypad Locked and returns to the Home
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Intro Screen and press c to select.
5 Press c to enable Introduction Screen. The display shows
9 beside Enabled.
OR
Press c to disable Introduction Screen. The 9 disappears
from beside Enabled.
screen.
6 To unlock the keypad, press c followed by *.
7 The display shows Keypad Unlocked and returns to the
Home screen.
NOTE: At Step 4, you can also use < or > to change the
selected option.
NOTE: At Step 4, you can also use < or > to change the
selected option.
10
English
Language
Turning the LED Indicator On or Off
You can set your radio display to be in your required language.
You can enable and disable the LED Indicator if needed.
Procedure:
Procedure:
1 c to access the menu.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Language and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to the required language and press c to enable.
4 ^ or v to LED Indicator and press c to select.
9 appears beside selected language.
NOTE: At Step 4, you can also use < or > to change the
selected option.
5 Press c to enable LED indicator. The display shows 9
beside Enabled.
OR
Press c to disable LED indicator. The 9 disappears from
beside Enabled.
The display backlight, buttons, and keypad backlighting are
automatically turned off if the LED indicator is disabled (see
Controlling the Display Backlight on page 100).
NOTE: At Step 4, you can also use < or > to change the
selected option.
10
English
Turning the Voice Operating Transmission (VOX)
Feature On or Off
This feature allows you to initiate a hands-free voice activated
call on a programmed channel. The radio automatically
transmits, for a programmed period, whenever the microphone
on the VOX-capable accessory detects voice.
Pressing the PTT button during radio operation will disable
VOX. To re-enable VOX, do one of the following:
• Turn the radio off and power it on again, OR
• Change the channel via the Channel Selector Knob, OR
• Follow the procedure below.
NOTE: Turning this feature on or off is limited to radios with
this function enabled. Check with your dealer or system
administrator for more information.
4 ^ or v to VOX.
5 Press c to enable VOX. The display shows 9 beside
Enabled.
OR
Press c to disable VOX. The 9 disappears from beside
Enabled.
If the Talk Permit Tone feature is enabled (see Turning the Talk
Permit Tone On or Off on page 98), use a trigger word to
initiate the call. Wait for the Talk Permit Tone to finish before
speaking clearly into the microphone.
NOTE: At Step 4, you can also use < or > to change the
selected option.
Procedure:
Press the programmed VOX button to toggle the feature on or
off.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
10
English
Turning the Option Board Feature(s) On or Off
Voice Announcement
Option board capabilities within each channel and can be
assigned to programmable buttons. Refer to your dealer or
system administrator for more information.
This feature enables the radio to audibly indicate the current
Zone or Channel the user has just assigned, or programmable
button press. This audio indicator can be customized per
customer requirements. This is typically useful when the user is
in a difficult condition to read the content shown on the display.
Procedure:
Press the programmed Option Board Feature button to toggle
the feature on or off.
Identifying Cable Type
You can select the type of cable your radio uses.
Procedure:
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Cable Type and press c to select.
5 The current cable type is indicated by a 9.
NOTE: At Step 4, you can also use < or > to change the
selected option.
Use the following features to toggle Voice Announcement on or
off.
Procedure:
Press the programmed Voice Announcement button.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Voice Announcement.
4 Press c to enable Voice Announcement. The display
shows 9 beside Enabled.
OR
Press c to disable Voice Announcement. The 9
disappears from beside Enabled.
NOTE: At Step 3, you can also use < or > to change the
selected option.
10
English
Call Forwarding
Menu Timer
You can enable your radio to automatically forward voice calls
to another radio.
Set the period of time your radio stays in the menu before it
automatically switches to the Home screen.
Procedure:
Procedure:
1 c to access the menu.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Call Forward.
4 Press c to enable Call Forwarding. The display shows 9
beside Enabled.
OR
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Menu Timer and press c to select.
5 ^ or v to the required setting and press c to enable.
Press c to disable Call Forwarding. The 9 disappears
from beside Enabled.
NOTE: At Step 3, you can also use < or > to change the
selected option.
10
English
Analog Mic AGC
Digital Mic AGC
This feature controls the your radio's microphone gain
automatically while transmitting on an analog system. It
supresses loud audio or boosts soft audio to a preset value in
order to provide a consistent level of audio.
This feature controls the your radio's microphone gain
automatically while transmitting on an digital system. It
supresses loud audio or boosts soft audio to a preset value in
order to provide a consistent level of audio.
Procedure:
Procedure:
1 c to access the menu.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Analog Mic AGC.
4 ^ or v to Digital Mic AGC.
5 Press c to enable Analog Mic AGC. The display shows 9
5 Press c to enable Digital Mic AGC. The display shows 9
beside Enabled.
OR
beside Enabled.
OR
Press c to disable Analog Mic AGC. The 9 disappears
from beside Enabled.
Press c to disable Digital Mic AGC. The 9 disappears
from beside Enabled.
NOTE: At Step 3, you can also use < or > to change the
selected option.
10
English
NOTE: At Step 3, you can also use < or > to change the
selected option.
Intelligent Audio
GPS
Your radio automatically adjusts its audio volume to overcome
current background noise in the environment.
Global Positioning System (GPS) is a satellite navigation
system that determines the radio’s precise location.
Use the following features to toggle Intelligent Audio on or off.
It is recommended you only disable GPS to save battery life
when the GPS signal is unavailable.
Procedure:
Press the programmed Intelligent Audio button to toggle the
feature on or off.
OR
Follow the procedure below.
Procedure:
1 c to access the menu.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Intelligent Audio.
4 ^ or v to GPS.
5 Press c to enable Intelligent Audio. The display shows 9
5 Press c to enable GPS. The display shows 9 beside
beside Enabled.
OR
Press c to disable Intelligent Audio. The 9 disappears
from beside Enabled.
NOTE: At Step 3, you can also use < or > to change the
selected option.
Press the programmed GPS button to toggle the feature on or
off.
OR
Enabled.
OR
Press c to disable GPS. The 9 disappears from beside
Enabled.
See Checking the GPS Information on page 109 for details on
retrieving GPS information.
NOTE: At Step 4, you can also use < or > to change the
selected option.
10
English
Accessing General Radio Information
Your radio contains information on the following:
• Battery
• Radio Alias and ID
• Firmware and Codeplug Versions
• GPS Information
NOTE: Press d at any time to return to the previous screen
or long press d to return to the Home screen. The
radio exits the current screen once the inactivity timer
expires.
Accessing the Battery Information
Displays information on your radio battery.
Procedure:
5 The display shows the battery information.
OR
For IMPRES batteries ONLY: The display reads
Recondition Battery if the battery requires
reconditioning in an IMPRES charger.
After the reconditioning process, the display then shows the
battery information.
Checking the Radio Alias and ID
Displays the ID of your radio.
Procedure:
Press the programmed Radio Alias and ID button to check your
radio alias and ID. You hear a positive indicator tone.
OR
Follow the procedure below.
1 c to access the menu.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Info and press c to select.
3 ^ or v to Radio Info and press c to select.
4 ^ or v to Battery Info and press c to select.
10
English
4 ^ or v to My Number and press c to select.
5 The first line of the display shows the radio alias. The
second line of the display shows the radio ID
You can also press the programmed Radio Alias and ID button
to return to the previous screen.
Checking the Firmware Version and Codeplug
Checking the GPS Information
Version
Displays the GPS information on your radio, such as values of:
Displays the firmware and codeplug versions on your radio.
Procedure:
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
• Latitude
• Longitude
• Altitude
• Direction
3 ^ or v to Radio Info and press c to select.
• Velocity
4 ^ or v to Versions and press c to select.
• Horizontal Dilution of Precision (HDOP)
5 The display shows the current firmware and codeplug
• Satellites
versions.
• Version
Procedure:
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Info and press c to select.
4 ^ or v to GPS Info and press c to select.
5 ^ or v to the required item and press c to select.
6 The display shows the requested GPS information.
See GPS on page 107 for details on GPS.
10
English
Front Panel Programming (FPP)
Your radio is able to customize certain feature parameters to
enhance the use of your radio.
Entering FPP Mode
Procedure:
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Program Radio and press c to select.
NOTE: Long press d at any time to return to the Home
screen.
11
English
Editing FPP Mode Parameters
Use the following buttons as required while navigating through
the feature parameters.
^, v, <, > – Scroll through options, increase/decrease values,
or navigate vertically
c – Select the option or enter a sub-menu
d – Short-press to return to previous menu or to exit the
selection screen. Long-press to return to Home screen.
Accessories
• UHF, 403 – 527 MHz, Whip Antenna (PMAE4068_)
Accessories
Your radio is compatible with the accessories listed in this
chapter. Contact your dealer for details.
Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 111
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 111
Carry Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 112
Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 112
Earbuds and Earpieces . . . . . . . . . . . . . . . . . . . . . . . page 112
Headsets and Headset Accessories . . . . . . . . . . . . . page 112
Remote Speaker Microphones . . . . . . . . . . . . . . . . . page 112
Surveillance Accessories. . . . . . . . . . . . . . . . . . . . . . page 112
Miscellaneous Accessories . . . . . . . . . . . . . . . . . . . . page 113
Antennas
• UHF, 403 – 450 MHz, Stubby Antenna (PMAE4069_)
• UHF, 440 – 490 MHz, Stubby Antenna (PMAE4070_)
• UHF, 470 – 527 MHz, Stubby Antenna (PMAE4071_)
• VHF, 144 – 165 MHz, Helical Antenna (PMAD4116_)
• VHF, 136 – 155 MHz, Helical Antenna (PMAD4117_)
• VHF, 152 – 174 MHz, Helical Antenna (PMAD4118_)
• VHF, 136 – 148 MHz, Stubby Antenna (PMAD4119_)
• VHF, 146 – 160 MHz, Stubby Antenna (PMAD4120_)
• VHF, 160 – 174 MHz, Stubby Antenna (PMAD4121_)
Batteries
• Core NiMH, 1300mAh Battery (PMNN4412_)
• Core Slim Li-Ion, 1500 mAh Battery (PMNN4406_)
• IMPRES Li-Ion, 1500 mAh Slim Battery (PMNN4407_)
• IMPRES Hi-Capacity Li-Ion, 2150 mAh Battery (PMNN4409_)
• IMPRES Hi-Capacity Li-Ion, 2300 mAh Battery (NNTN8129_)
11
English
Carry Devices
• Nylon Carry Case with 3-Inch Fixed Belt Loop for Full-Keypad
and Limited-Keypad Radio (PMLN5844_)
• Belt Clip for 2-Inch Belt Width (PMLN4651_)
• Belt Clip for 2.5-Inch Belt Width (PMLN7008_)
Headsets and Headset Accessories
• Heavy Duty Noise-Canceling Headset (PMLN5275_)
• Non-Secure Wireless Headset & Pod with Push-to-Talk
Audio, 12-Inch Cable (NNTN8125_)
• Non-Secure Wireless Headset & Pod with Push-to-Talk
Audio, 9.5-Inch Cable (NNTN8126_)
Accessories
Chargers
•
•
•
•
•
•
•
•
IMPRES Multi-Unit Charger (WPLN4212_)
IMPRES Multi-Unit Charger with Display (WPLN4219_)
IMPRES Single-Unit Charger (WPLN4232_)
• Non-Secure HK200 Mobile Bluetooth Headset (89409N)
Earbuds and Earpieces
D-Shell Earset (PMLN5096_)
Remote Speaker Microphones
Core Single-Unit Charger (NNTN8117_)
• Remote Speaker Microphone (PMMN4024_)
IMPRES Vehicular Charger (NNTN7616_)
• IMPRES Remote Speaker Microphone (PMMN4025_)
IMPRES Battery Reader (NNTN7392_)
Surveillance Accessories
• Receive-Only Surveillance Kit, Black (Single Wire)
(RLN5878_)
• Receive-Only Surveillance Kit, Beige (Single Wire)
11
English
(RLN5879_)
• IMPRES 2-Wire Surveillance Kit, Black (RLN5880_)
• IMPRES 2-Wire Surveillance Kit, Beige (RLN5881_)
Acoustic Tube, Black (RLN5882_)
• IMPRES 2-Wire Surveillance Kit with Clear, Comfortable
Acoustic Tube, Beige (RLN5883_)
• IMPRES 3-Wire Surveillance, Black (PMLN5097_)
• IMPRES 3-Wire Surveillance, Beige (PMLN5106_)
Accessories
• IMPRES 2-Wire Surveillance Kit with Clear, Comfortable
• IMPRES 3-Wire Surveillance Kit with Clear, Comfortable
Acoustic Tube, Black (PMLN5111_)
• IMPRES 3-Wire Surveillance Kit with Clear, Comfortable
Acoustic Tube, Beige (PMLN5112_)
Miscellaneous Accessories
• Universal Chest Pack (HLN6602_)
• Shoulder Strap (Attaches to D-Rings on Carry Case)
(NTN5243_)
• Break-A-Way Chest Pack (RLN4570_)
• Universal RadioPAK and Utility Case (Fanny Pack)
(RLN4815_)
11
English
The Capacity Warranty
Batteries and Chargers Warranty
The capacity warranty guarantees 80% of the rated capacity for the
warranty duration.
The Workmanship Warranty
The workmanship warranty guarantees against defects in
Batteries and Chargers Warranty
workmanship under normal use and service.
All MOTOTRBO Batteries
Two (2) Years
IMPRES Chargers (Single-Unit and Multi-Unit,
Non-Display)
Two (2) Years
IMPRES Chargers (Multi-Unit with Display)
One (1) Year
11
English
Nickel Metal-Hydride (NiMH) or Lithium-Ion
(Li-lon) Batteries
12 Months
IMPRES Batteries, When Used Exclusively
with IMPRES Chargers
18 Months
obligations or liability for additions or modifications to this warranty
unless made in writing and signed by an officer of MOTOROLA.
Limited Warranty
I. WHAT THIS WARRANTY COVERS AND FOR HOW
LONG:
MOTOROLA SOLUTIONS, INC. (“MOTOROLA”) warrants the
MOTOROLA manufactured Communication Products listed below
(“Product”) against defects in material and workmanship under
normal use and service for a period of time from the date of
purchase as scheduled below:
XPR Series Digital Portable Radios
Two (2) Years
Product Accessories (Excluding
Batteries and Chargers)
One (1) Year
MOTOROLA, at its option, will at no charge either repair the
Product (with new or reconditioned parts), replace it (with a new or
reconditioned Product), or refund the purchase price of the Product
during the warranty period provided it is returned in accordance
with the terms of this warranty. Replaced parts or boards are
warranted for the balance of the original applicable warranty period.
All replaced parts of Product shall become the property of
MOTOROLA.
This express limited warranty is extended by MOTOROLA to the
original end user purchaser only and is not assignable or
transferable to any other party. This is the complete warranty for the
Product manufactured by MOTOROLA. MOTOROLA assumes no
Unless made in a separate agreement between MOTOROLA and
the original end user purchaser, MOTOROLA does not warrant the
installation, maintenance or service of the Product.
MOTOROLA cannot be responsible in any way for any ancillary
equipment not furnished by MOTOROLA which is attached to or
used in connection with the Product, or for operation of the Product
with any ancillary equipment, and all such equipment is expressly
excluded from this warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims liability for range,
coverage, or operation of the system as a whole under this
warranty.
Limited Warranty
MOTOROLA COMMUNICATION PRODUCTS
II. GENERAL PROVISIONS:
This warranty sets forth the full extent of MOTOROLA'S
responsibilities regarding the Product. Repair, replacement or
refund of the purchase price, at MOTOROLA’s option, is the
exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR
DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME,
INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR
SAVINGS OR OTHER INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
11
English
INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT
SUCH MAY BE DISCLAIMED BY LAW.
III. STATE LAW RIGHTS:
SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES
OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY
NOT APPLY.
This warranty gives specific legal rights, and there may be other
rights which may vary from state to state.
Limited Warranty
IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the date of purchase
and Product item serial number) in order to receive warranty
service and, also, deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty service location.
Warranty service will be provided by MOTOROLA through one of its
authorized warranty service locations. If you first contact the
company which sold you the Product (e.g., dealer or
communication service provider), it can facilitate your obtaining
warranty service. You can also call MOTOROLA at 1-800-927-2744
US/Canada.
V. WHAT THIS WARRANTY DOES NOT COVER:
A) Defects or damage resulting from use of the Product in other
than its normal and customary manner.
B) Defects or damage from misuse, accident, water, or neglect.
11
English
C)Defects or damage from improper testing, operation,
maintenance, installation, alteration, modification, or adjustment.
D)Breakage or damage to antennas unless caused directly by
defects in material workmanship.
E) A Product subjected to unauthorized Product modifications,
disassembles or repairs (including, without limitation, the addition
to the Product of non-MOTOROLA supplied equipment) which
adversely affect performance of the Product or interfere with
MOTOROLA's normal warranty inspection and testing of the
Product to verify any warranty claim.
F) Product which has had the serial number removed or made
illegible.
G)Rechargeable batteries if:
(1) any of the seals on the battery enclosure of cells are broken
or show evidence of tampering.
(2) the damage or defect is caused by charging or using the
battery in equipment or service other than the Product for which it
is specified.
H)Freight costs to the repair depot.
I) A Product which, due to illegal or unauthorized alteration of the
software/firmware in the Product, does not function in
accordance with MOTOROLA’s published specifications or the
FCC certification labeling in effect for the Product at the time the
Product was initially distributed from MOTOROLA.
J) Scratches or other cosmetic damage to Product surfaces that
does not affect the operation of the Product.
K) Normal and customary wear and tear.
VI. PATENT AND SOFTWARE PROVISIONS:
Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA
software such as the exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software. MOTOROLA
software may be used in only the Product in which the software was
originally embodied and such software in such Product may not be
replaced, copied, distributed, modified in any way, or used to
produce any derivative thereof. No other use including, without
limitation, alteration, modification, reproduction, distribution, or
reverse engineering of such MOTOROLA software or exercise of
rights in such MOTOROLA software is permitted. No license is
granted by implication, estoppel or otherwise under MOTOROLA
patent rights or copyrights.
Limited Warranty
MOTOROLA will defend, at its own expense, any suit brought
against the end user purchaser to the extent that it is based on a
claim that the Product or parts infringe a United States patent, and
MOTOROLA will pay those costs and damages finally awarded
against the end user purchaser in any such suit which are
attributable to any such claim, but such defense and payments are
conditioned on the following:
A) that MOTOROLA will be notified promptly in writing by such
purchaser of any notice of such claim;
B) that MOTOROLA will have sole control of the defense of such
suit and all negotiations for its settlement or compromise; and
C)should the Product or parts become, or in MOTOROLA’s opinion
be likely to become, the subject of a claim of infringement of a
United States patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to procure for
such purchaser the right to continue using the Product or parts or
to replace or modify the same so that it becomes non-infringing
or to grant such purchaser a credit for the Product or parts as
depreciated and accept its return. The depreciation will be an
equal amount per year over the lifetime of the Product or parts as
established by MOTOROLA.
MOTOROLA will have no liability with respect to any claim of patent
infringement which is based upon the combination of the Product or
parts furnished hereunder with software, apparatus or devices not
furnished by MOTOROLA, nor will MOTOROLA have any liability
for the use of ancillary equipment or software not furnished by
MOTOROLA which is attached to or used in connection with the
Product. The foregoing states the entire liability of MOTOROLA with
respect to infringement of patents by the Product or any parts
thereof.
VII. GOVERNING LAW:
This Warranty is governed by the laws of the State of Illinois, U.S.A.
11
English
Notes
Notes
11
English
m
XPR Series Digital
Portable Radios
Quick Reference Card
NOTE: Refer to User Guide for more details on
your radio's operations/features.
Radio Controls
17
16
15
13
12
11
10
Record your radio’s programmable button
functions in the blanks provided. SP represents
Short Press, LP represents Long Press.
Emergency Button (Programmable)
SP: _____________ LP: _____________
17
Antenna
On/Off/Volume Control Knob
LED Indicator
Side Button 1 (Programmable)
SP: _____________ LP: _____________
Push-to-Talk (PTT) Button
Side Button 2 (Programmable)
SP: _____________ LP: _____________
Side Button 3 (Programmable)
SP: _____________ LP: _____________
Front Button P1 (Programmable)
SP: _____________ LP: _____________
A Left/Right Navigation Keys
Keypad
B Menu Button
14
16
10
Menu Navigation Keys
11
Front Button P2 (Programmable)
SP: _____________ LP: _____________
12
Display
13
Microphone
14
Universal Connector for Accessories
15
Speaker
Channel Selector Knob
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are
used under license. All other trademarks are the property of their respective owners.
© 2011 Motorola Solutions, Inc. All Rights Reserved. 08/11
1301 E. Algonquin Rd., Schaumburg, IL 60196-1078, U.S.A.
Printed in the U.S.A.
Menu Navigation Buttons
C OK Button
D Back/Home Button
Display Icons
The following are the icons that appear on the
radio’s display.
The number of bars displayed represents
the radio signal strength. Four bars
indicates the strongest signal. This icon is
only displayed while receiving.
*6880309T13*
68xxxxxxxx-A
English
Selected channel is being monitored.
or
Radio is currently set at Low Power (L) or
High Power (H).
Tones are turned off.
Radio bypasses the repeater and
communicates directly with another radio.*
The number of bars (0 – 4) shown
indicates the charge remaining in the
battery. Blinks when the battery is low.
* Not applicable in Capacity Plus
The Option Board is enabled.
Call Icons
The following icons appear during a call, and in
The Option Board is disabled.
The GPS feature is enabled. The icon
stays lit when a position fix is available.
The GPS feature is enabled but is not
receiving data from the satellite.
Scan feature is enabled.*
Radio recognizes activity on the channel/
group designated as Priority 1 (if is
blinking) or as Priority 2 (if is steady).*
•
•
Unread message in the Inbox.
the Contacts list to indicate ID type.
Indicates a Private Call in progress. In
Contacts list, it indicates a subscriber
alias or ID.
Indicates a Group Call or All Call in
progress. In Contacts list, it indicates a
group alias or ID.
Sent Items Icons
The following icons appear at the top right corner
of the radio’s display in the Sent Items folder.
LED Indicator
Blinking red – Radio is receiving an Emergency
transmission or has failed the self-test upon
powering up.
Solid yellow – Radio is receiving a request for a
Private Call, or monitoring a channel.
Blinking yellow – Radio is scanning for activity
or receiving a .
Double blinking yellow – Radio is no longer
connected to the repeater while in Capacity Plus,
all Capacity Plus channels are currently busy or
in locked state.
Rapidly blinking yellow – Radio is searching for
a new site.
Solid green – Radio is transmitting.
Blinking green – Radio is powering up,
receiving a non-privacy-enabled call or data, or
detecting activity over the air.
User’s Inbox is full.
The text message is sent successfully.
Radio is in Emergency mode.
The text message cannot be sent.
Rapidly blinking green – Radio is receiving a
privacy-enabled call or data.
The Privacy feature is enabled.
• The text message to a group alias or
ID is pending transmission.
For Capacity Plus, there is no LED indication
when the radio is detecting activity over the air.
The Privacy feature is disabled.
• The text message to a subscriber alias
or ID is pending transmission, followed
by waiting for acknowledgement.
The Site Roaming feature is enabled.*
English
Powering Up and Turning Off the
Radio
Rotate the On/Off/Volume Control Knob
clockwise until you hear a click to turn on the
radio, and counterclockwise until you hear a click
to turn it off.
Adjusting the Volume
Turn the On/Off/Volume Control Knob clockwise
or counterclockwise.
After the third incorrect password, the display
shows Wrong Password and then, shows
Radio Locked. A tone sounds and the LED
double blinks yellow.
NOTE: Your radio can be programmed to have a
minimum volume offset where the
volume level cannot be turned down
fully. Check with your dealer or system
administrator for more information.
Your radio enters into locked state for 15
minutes, and responds to inputs from On/Off/
Volume Control Knob and programmed
Backlight button only.
Accessing the Radio from Password
NOTE: The radio is unable to receive any call,
including emergency calls, in locked
state.
Power up the radio.
1 You hear a continuous tone. The first line of
the display shows Enter Password:. The
second line of the display shows a blinking
cursor.
2 Enter a four-digit password. The second line
of the display shows ****. Press N to
proceed.
You hear a positive indicator tone for every
digit pressed. Press P to remove the last *
on the display. You hear a negative indicator
tone, if you press P when the second line of
the display is empty, or if you press more than
four digits.
3 If the password is correct:
Your radio proceeds to power up.
OR
If the password is incorrect:
The display shows Wrong Password. Repeat
Steps 1 and 2.
Password less than four digits is incorrect.
OR
6 The first line of the display shows the
characters you keyed in. The second line of
the display shows the required zone.
The alias search is case-insensitive. If there
are two or more zones with the same name,
the radio displays the zone that is listed first in
the zone list.
7 The display shows Selected
momentarily and returns to the selected zone
screen.
Selecting a Radio Channel,
Subscriber ID, or Group ID
Press the programmed Zone button and proceed
to Step 3.
OR
Follow the procedure below.
1 S to access the menu.
2 Por Q to Zone and press N to select.
3 The current zone is displayed and indicated
by a .
4 Por Q to the required zone and proceed
to Step 7.
OR
Key in the first character of the required zone.
5 A blinking cursor appears.
Use the keypad to type the required zone.
Press P to move one space to the left.
Press Q to move one space to the right.
Press the *DEL key to delete any unwanted
characters.
1 Turn the On/Off/Volume Control Knob to
power up your radio.
2 Turn the Channel Selector Knob to select the
required channel, subscriber ID, or group ID.
Capacity Plus
Turn the Channel Selector Knob clockwise or
counterclockwise to access channels with
Capacity Plus.
Making a Group Call
Press the programmed One Touch Access
button and proceed to Step 2.
OR
Long press the programmed number key and
proceed to Step 2.
OR
English
Follow the procedure below.
1 Turn the Channel Selector Knob to select the
channel with the active group alias or ID.
OR
S to access the menu.
Por Q to Contacts. Press N to select.
Por Q to the alias or ID you want to call
and press N to select.
2 Hold the radio vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
3 Press the PTT button to make the call. The
LED lights up solid green. The display shows
the group alias or ID, and the Group Call icon.
4 Wait for the Talk Permit Tone to finish (if
enabled).
OR
Wait for the PTT Sidetone to finish (if
enabled).
5 Speak clearly into the microphone.
6 Release the PTT button to listen. When the
target radio responds, the LED blinks green.
Display shows the Group Call icon, the group
ID, and target radio ID.
If the Channel Free Indication feature is
enabled, you will hear a short alert tone
the moment the target radio releases the
PTT button, indicating the channel is free
for you to respond. Press the PTT button
to respond.
OR
English
If the Voice Interrupt feature is enabled,
press the PTT button to stop the current
call from the transmitting radio and free the
channel for you to talk/respond.
OR
If there is no voice activity for a
programmed period of time, the call ends.
To make a call to a group of users, your radio
must be configured as part of that group.
Your radio must have the Privacy feature
enabled on the channel to send a privacyenabled transmission. Only target radios with
the same Privacy Key OR the same Key
Value and Key ID as your radio will be able to
unscramble the transmission.
Making a Private Call
NOTE: Your radio must be programmed for you
to initiate a Private Call.
Press the programmed One Touch Access
button and proceed to Step 2.
OR
Long press the programmed number key and
proceed to Step 2.
OR
Follow the procedure below.
1 Turn the Channel Selector Knob to select the
channel with the active subscriber alias or ID.
OR
S to access the menu.
Por Q to Contacts. Press N to select.
Por Q to the ID you want to call and
press N to select.
OR
Use the keypad to type the required alias.
The first line of the display shows the
characters you keyed in. The second line of
the display shows the required alias.
2 Hold the radio vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
3 Press the PTT button to make the call. The
LED lights up solid green. The first line
displays the subscriber alias or ID. The
second line displays Private Call and the
Private Call icon.
4 Wait for the Talk Permit Tone to finish (if
enabled). Speak clearly into the microphone.
5 Release the PTT button to listen. When the
target radio responds, the LED blinks green.
6 If the Channel Free Indication feature is
enabled, you will hear a short alert tone the
moment the target radio releases the PTT
button, indicating the channel is free for you
to respond. Press the PTT button to respond.
OR
If the Voice Interrupt feature is enabled, press
the PTT button to stop the current call from
the transmitting radio and free the channel for
you to talk/respond.
OR
If there is no voice activity for a programmed
period of time, the call ends.
7 You hear a short tone. The display shows
Call Ended.
Your radio must have the Privacy feature
enabled on the channel to send a privacyenabled transmission. Only target radios with the
same Privacy Key OR the same Key Value and
Key ID as your radio will be able to unscramble
the transmission.
Making an All Call
NOTE: Your radio must be programmed to allow
you to use this feature. Users on the
channel cannot respond to an All Call.
Long press the programmed number key and
proceed to Step 2.
OR
Follow the procedure below.
1 Turn the Channel Selector Knob to select the
channel with the active All Call group alias or
ID.
2 Hold the radio vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
3 Press the PTT button to make the call. The
LED lights up solid green. The display shows
the All Call group alias or ID, and the All Call
icon.
4 Wait for the Talk Permit Tone to finish (if
enabled).
OR
Wait for the PTT Sidetone to finish (if
enabled).
5 Speak clearly into the microphone.
6 If there is no voice activity for a programmed
period of time, the call ends.
When you receive an All Call, a message
appears and remains on your radio’s display until
the call ends. You will not be able to continue
with any menu navigation or editing until the call
ends.
Once the All Call ends, the radio returns to the
menu prior to receiving the call.
Scanning Channels
NOTE: This feature is not applicable in Capacity
Plus.
Press the programmed Scan button to turn scan
on or off.
OR
Follow the procedure below.
1 S to access the menu.
2 Por Q to Scan and press N to select.
3 You see Scan On or Scan Off depending on
previous selection.
During scan, the LED blinks yellow and the scan
icon is displayed.
Making a
Press the programmed One Touch Access
button and proceed to Step 5.
OR
Follow the procedure below.
1 S to access the menu.
2 Por Q to Contacts. Press N to select.
3 Por Q to the required subscriber alias or
ID and press N to select.
4 Por Q to and press N to select.
5 The display shows : . The LED lights up solid green.
6 If the acknowledgement is received, a tone
sounds. Display shows Successful.
OR
If the acknowledgement is not received, a
tone sounds. Display shows Failed.
Sending a Quick Text Message
Press the programmed Text Message button
and proceed to Step 3.
OR
Press the programmed One Touch Access
button to send a predefined Quick Text message
to a predefined alias or ID and proceed to Step 6.
OR
Follow the procedure below.
1 S to access the menu.
2 Por Q to Messages. Press N to select.
3 Por Q to Quick Text and press N to
select.
4 Por Q to the required Quick Text and
press N to select.
5 Por Q to the required alias or ID and
press N to select.
English
6 The display shows Text Message:
.
7 If the message is sent successfully, a tone
sounds. Display shows Message Sent.
OR
If the message cannot be sent, the display
shows Message Send Failed.
Replying to a Text Message with
Quick Text from the Inbox
Press the programmed Text Message button
and proceed to Step 3.
OR
Follow the procedure below.
1 S to access the menu.
If the message fails to send, the radio returns you
to the Resend option screen.
2 Por Q to Messages. Press N to select.
• Press N to resend the message to the same
subscriber/group alias or ID.
3 Por Q to Inbox. Press N to select.
• Select Forward to send the message to
another subscriber/group alias or ID.
• Select Edit to edit the message before
sending it.
NOTE: Once a message is sent to another
radio, it is saved in Sent Items. The most
recent sent text message is always
added to the top of the Sent Items list.
The Sent Items folder stores a maximum
of thirty (30) last sent messages. When
the folder is full, the next sent text
message automatically replaces the
oldest text message in the folder.
The icon at the top right corner of the
screen indicates the status of the
message.
English
4 Por Q to the required message and
press N to select.
A subject line may be shown if the message
is from an e-mail application.
5 Press N once more to access the submenu.
6 Por Q to Reply and press N to select.
7 Por Q to Quick Text and press N to
select.
8 Press N once more to send the reply.
9 The display shows Text Message:
.
10 If the message is sent successfully, a tone
sounds. Display shows Message Sent.
OR
If the message cannot be sent, the display
shows Message Send Failed.
If the message fails to send, the radio returns you
to the Resend option screen.
• Press N to resend the message to the same
subscriber/group alias or ID.
• Select Forward to send the message to
another subscriber/group alias or ID.
• Select Edit to edit the message before
sending it.
Sending an Emergency Alarm
1 Press the programmed Emergency On
button.
2 The display shows Sending Alarm, which
alternates with your radio ID. The LED lights
up solid green and the Emergency icon
appears on the Home screen display.
3 When an Emergency Alarm acknowledgment
is received, the Emergency tone sounds and
the LED blinks green. The display shows
Emergency Alarm Successful.
OR
If your radio does not receive an Emergency
Alarm acknowledgement, and after all retries
have been exhausted, a tone sounds and the
display shows Emergency Alarm Failed.
4 Radio exits the Emergency Alarm mode and
returns to the Home screen.
If your radio is set to Silent, it will not display any
audio or visual indicators during Emergency
mode.
Privacy
Press the programmed Privacy button to toggle
privacy on or off.
OR
Follow the procedure below.
1 S to access the menu.
2 Por Q to Utilities. Press N to
select.
3 Por Q to Radio Settings. Press N to
select.
4 Por Q to Privacy. Press N to select.
5 The display shows Privacy and Turn On.
Press N to enable privacy. The display
shows Privacy On.
OR
The display shows Privacy and Turn Off.
Press N to disable privacy. The display
shows Privacy Off.
IP Site Connect
NOTE: This feature is not applicable in Capacity
Plus.
Follow the procedure below.
1 S to access the menu.
2 Por Q to Utilities. Press N to
select.
3 Por Q to Radio Settings. Press N to
select.
4 Por Q to Site Roaming. Press N to
select.
5 Por Q to Unlock Site. Press N to
select. The display shows Site Unlocked.
The LED blinks yellow rapidly when the radio
is actively searching for a new site, and turns
off once the radio locks on to a site. The
display shows the site roaming icon.
OR
Por Q to Lock Site. Press N to
select. The display shows Site Locked. The
LED turns off.
OR
Press the programmed Manual Site Roam
button and proceed to Step 6.
OR
Follow the procedure below.
1 S to access the menu.
2 Por Q to Utilities. Press N to
select.
3 Por Q to Radio Settings. Press N to
select.
4 Por Q to Site Roaming. Press N to
select.
5 Por Q to Active Search. Press N to
select.
6 A tone sounds. The display shows Finding
Site.
The LED blinks green.
7 If a new site is found, a tone sounds, and the
LED turns off. The display shows Site
Found.
OR
If there is no available site within range, a
tone sounds, and the LED turns off. The
display shows Out of Range.
OR
If a new site is within range, but the radio is
unable to connect to it, a tone sounds, and
the LED turns off. The display shows
Channel Busy.
8 The radio returns to the Home screen.
Press the programmed Site Lock On/Off button
to toggle automatic site roaming on or off.
OR
English
Notes
English

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Copyright                       : Motorola Solutions, Inc.
Creator Tool                    : FrameMaker 8.0
Modify Date                     : 2011:08:10 18:29:14+08:00
Create Date                     : 2011:08:10 18:25:25Z
Metadata Date                   : 2011:08:10 18:29:14+08:00
Format                          : application/pdf
Title                           : MOTOTRBO User Guide
Creator                         : Motorola Solutions (GCD Penang)
Document ID                     : uuid:93d820a6-d29c-4641-abf5-f117b0065dc1
Instance ID                     : uuid:bec76ec5-7db2-45e6-9c0c-ee8c0e840723
Page Count                      : 140
Author                          : Motorola Solutions (GCD Penang)

EXIF Metadata provided by EXIF.tools

Motorola Solutions 99FT4086 UHF 4W PORTABLE RADIO User Manual MOTOTRBO User Guide

Motorola Solutions, Inc. UHF 4W PORTABLE RADIO MOTOTRBO User Guide

Contents

MANUAL

FCC ID Filing: ABZ99FT4086

Navigation menu

Namespaces

Views

Navigation