Motorola Solutions 99FT5001 CDM1550LS+ Mobile Radio User Manual 6864110R13 O cvr
Motorola Solutions, Inc. CDM1550LS+ Mobile Radio 6864110R13 O cvr
Contents
- 1. Ex 8a Users Manual Part 1
- 2. Ex 8b Users Manual Part 2
- 3. Antenna Installation Manual
Ex 8a Users Manual Part 1
6864110R13-O_cvr.qxd 2/21/02 12:39 PM Page 1 Motorola, The Stylized M logo, Intelligence Everywhere, Professional Radio - As Dedicated As You Are, CDM Series, CDM1550•LS+, and Call Alert are trademarks of Motorola, Inc. LTR is a mark of E.F. Johnson Company. PassPort is a mark of Trident Micro Systems. © 2002 Motorola, Inc. All rights reserved. Printed in U.S.A. CDM1550•LS+ ™ *6864110R13-O* 6864110R13-O User Guide Professional Radio - As Dedicated As You Are™ 6864110R13-OTOC.fm Page 1 Thursday, April 4, 2002 5:52 PM Computer Software Copyrights . . . . . . . . . 6 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 User Safety, Training, and General Information . . . . . . . . . . . . . . . . . . 7 Compliance with RF Energy Exposure Standards. . . . . . . . . . . . . . . . . . . . . . . . . . 7 Operational Instructions and Training Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . 8 Transmit and Receive . . . . . . . . . . . . . . 8 Mobile Antennas . . . . . . . . . . . . . . . . . . 9 Approved Accessories . . . . . . . . . . . . . 9 Fixed Site Antennas . . . . . . . . . . . . . . . 9 Electromagnetic Interference/ Compatibility. . . . . . . . . . . . . . . . . . . . . . . 10 Facilities . . . . . . . . . . . . . . . . . . . . . . . 10 Vehicles . . . . . . . . . . . . . . . . . . . . . . . 10 Driver Safety . . . . . . . . . . . . . . . . . . . . 11 Operational Warnings . . . . . . . . . . . . . . . 11 For Vehicles With an Air Bag . . . . . . . 11 Potentially Explosive Atmospheres. . . 11 Blasting Caps and Areas . . . . . . . . . . 11 Introduction . . . . . . . . . . . . . . . . . . . . . . . 13 CONTENTS CONTENTS Trunked Radio Systems . . . . . . . . . . . . . . 13 PassPort™ Trunked Systems . . . . . . . 13 LTR™ Trunked Systems . . . . . . . . . . . 13 Conventional Radio Systems . . . . . . . . . . 14 CDM1550•LS+ Radio Features . . . . . . . . . 14 Radio Wide Features . . . . . . . . . . . . . . 14 PassPort Zone Features . . . . . . . . . . . 14 LTR Zone Features . . . . . . . . . . . . . . . 15 Conventional Zone Features . . . . . . . . 15 Radio Overview . . . . . . . . . . . . . . . . . . . . 17 Parts of the Radio . . . . . . . . . . . . . . . . . . .17 CDM1550•LS+ Model. . . . . . . . . . . . . . 17 On/Off/Volume Control Knob . . . . . . . . 18 LED Indicators . . . . . . . . . . . . . . . . . . .18 Push-to-Talk (PTT) Button . . . . . . . . . . 19 Microphone. . . . . . . . . . . . . . . . . . . . . . 19 Menu/Select Button ). . . . . . . . . . . 19 Menu Exit/Button (. . . . . . . . . . . . .19 Menu Buttons . . . . . . . . . . . . . . . . . . . . 19 Display . . . . . . . . . . . . . . . . . . . . . . . . . 20 Microphone Jack . . . . . . . . . . . . . . . . . 21 Optional DTMF Microphone (RMN4026). . 21 DTMF Microphone Keypad . . . . . . . . . 22 English CONTENTS 6864110R13-OTOC.fm Page 2 Thursday, April 4, 2002 5:52 PM Programmable Buttons . . . . . . . . . . . . . . . 24 Audio Indicators for Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . . 28 Getting Started . . . . . . . . . . . . . . . . . . . . 29 Turning the Radio On or Off . . . . . . . . . . . Adjusting the Volume . . . . . . . . . . . . . . . . Selecting a Trunked Zone and Talkgroup. . . . . . . . . . . . . . . . . . . . . . Sending a Trunked Call . . . . . . . . . . . . . . Selecting a Conventional Zone and Channel . . . . . . . . . . . . . . . . . . . . . . . Direct Zone Access. . . . . . . . . . . . . . . . . . Direct Channel Access . . . . . . . . . . . . . . . Sending a Conventional Call . . . . . . . . . . Receiving a Trunked or Conventional Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repeater or Talkaround J Mode (Conventional Operation Only) . . . . . . . . . Call Light (Trunked Operation Only) . . . . . . . . . . . . . Home Channel . . . . . . . . . . . . . . . . . . . . . Horn and Lights . . . . . . . . . . . . . . . . . . . . To Activate Horn and Lights Programmed with Call Light (Trunked Operation Only) . . . . . . . . . . English 29 29 30 30 31 31 31 33 33 34 35 35 35 35 To Activate Horn and Lights Programmed with Call Alert (LTR Trunked Operation Only) . . . . . . 36 Remote Monitor (LTR Trunked and Conventional Operation Only) . . . . . . . . . . . . . . . . . . . . 36 Passport Trunking . . . . . . . . . . . . . . . . . 39 Seamless Roaming . . . . . . . . . . . . . . . . . Initial Registration . . . . . . . . . . . . . . . . Roaming and Registering Between Sites . . . . . . . . . . . . . . . . . . . . . . . . . . Site/Min View . . . . . . . . . . . . . . . . . . . . . . Roam Request . . . . . . . . . . . . . . . . . . . . . To Start a Roam Request . . . . . . . . . To Cancel a Roam Request . . . . . . . . Troubleshooting . . . . . . . . . . . . . . . . . . . . 39 39 40 41 42 42 43 43 Radio Calls . . . . . . . . . . . . . . . . . . . . . . . 45 Making a Selective Call (LTR Trunked and Conventional Operation Only) . . . . . . . . . . . . . . . . . . . . 45 Receiving a Selective Call F (LTR Trunked and Conventional Operation Only) . . . . . . . . . . . . . . . . . . . . 46 Sending a Call Alert Page (LTR Trunked and Conventional Operation Only) . . . . . . . . . . . . . . . . . . . . 46 6864110R13-OTOC.fm Page 3 Thursday, April 4, 2002 5:52 PM Editing a Radio Call List K (LTR Trunked and Conventional Operation Only) . . . . . . . . . . . . . . . . . . . . Name and Call Tone Tagging (LTR Trunked and Conventional Operation Only) . . . . . . . . . . . . . . . . . . . . To Tag a Specific User’s Name. . . . . . To Tag a Type of Radio Call . . . . . . . . 55 CONTENTS Receiving a Call Alert Page (LTR Trunked and Conventional Operation Only). . . . . . . . . . . . . . . . . . . . . 47 Radio Check (LTR Trunked and Conventional Operation Only). . . . . . . . . . . . . . . . . . . . . 48 Sending a Status (Conventional Operation Only) . . . . . . . . . 48 Sending a Message (Conventional Operation Only) . . . . . . . . . 49 Receiving a Message (Conventional Operation Only) . . . . . . . . . 50 Responding to Emergency Alerts E (Conventional Operation Only) . . . . . . . . . 50 Decoding an Emergency Alarm . . . . . . 51 Multiple Queued Emergencies. . . . . . . 52 Three Minute Timer . . . . . . . . . . . . . . . 52 After the Timer Expires . . . . . . . . . . . . 52 Clearing an Emergency Alert E (Conventional Operation Only) . . . . . . . . . 53 Sending an Emergency Remote Monitor (Conventional Operation Only) . . . . . . . . . 53 Sending an Emergency Alert E (Conventional Operation Only) . . . . . . . . . 54 Sending a Remote Monitor . . . . . . . . . . . . 54 Selective Radio Inhibit (Conventional Operation Only) . . . . . . . . . 55 56 56 57 Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Talkback . . . . . . . . . . . . . . . . . . . . . . . . . . PassPort Primary Auto Group Scan (PassPort Trunked Operation Only) . . . . . PassPort Group Scan G (PassPort Trunked Operation Only) . . . . . Enabled . . . . . . . . . . . . . . . . . . . . . . . . To Start or Stop PassPort Group Scan Operation through a Preprogrammed Button . . . . . . . . . . . . To Start or stop PassPort Group Scan Operation through the Menu . . . Auto Group Scan (LTR Trunked Operation Only) . . . . . . . . . To Start Auto Group Scan . . . . . . . . . . To Stop Auto Group Scan . . . . . . . . . . 59 60 60 60 61 61 61 61 62 English CONTENTS 6864110R13-OTOC.fm Page 4 Thursday, April 4, 2002 5:52 PM All Group Scan (LTR Trunked Operation Only) . . . . . . . . . To Start or Stop All Group Scan Operation through a Preprogrammed Button . . . . . . . . . . . . . . . . . . . . . . . . . To Start or Stop All Group Scan Operation Through the Menu . . . . . . . System Scan G (LTR Trunked and Conventional Operation Only) . . . . . . . . . . . . . . . . . . . . When System Scan is Enabled . . . . . . To Start or Stop a System Scan Operation. . . . . . . . . . . . . . . . . . . . . . . Deleting a Nuisance Channel/Talkgroup (PassPort Group Scan or System Scan Operation Only) . . . . . . . . . . . . . . . . . . . . To Temporarily Delete the Channel/Talkgroup . . . . . . . . . . . . . . . Restoring a Channel/Talkgroup Back to the Scan List . . . . . . . . . . . . . . . . . . Editing a Scan List (PassPort Group Scan or System Scan Operation Only) . . . . . . . . . . . . . . . . . . . . Adding or Deleting Talkgroups or Channels in a Scan List . . . . . . . . . . . . . . English 62 62 62 63 63 63 Prioritizing a Talkgroup or Channel in a Scan List (System Scan Operation Only) . . . . . . . . 66 Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Making a Phone Call D Through a Trunked System . . . . . . . . . . . . . . . . . . . . Making a Phone Call D Through a Conventional System . . . . . . . . . . . . . . . . Receiving a Phone Call D Through a Trunked or Conventional System. . . . . . . Modifying the Phone List K . . . . . . . . . . To Add an Entry . . . . . . . . . . . . . . . . . To Delete an Entry . . . . . . . . . . . . . . . To Edit an Entry . . . . . . . . . . . . . . . . . 69 70 72 73 73 74 75 64 Voice Storage . . . . . . . . . . . . . . . . . . . . . 77 64 Incoming Call Recording . . . . . . . . . . . . . Selective Incoming Call Recording . . . To Selectively Record an Incoming Call . . . . . . . . . . . . . . . . . . . . . . . . . . . All Incoming Call Recording . . . . . . . . To Record All Incoming Calls . . . . . . . Voice Memo Recording . . . . . . . . . . . . . . To Record a Voice Memo using the Preprogrammed Record/Playback Button . . . . . . . . . . . . . . . . . . . . . . . . . 64 64 65 78 78 78 78 79 80 80 6864110R13-OTOC.fm Page 5 Thursday, April 4, 2002 5:52 PM Audio/Tone Settings . . . . . . . . . . . . . . . . 87 Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Selecting the Display Language (LTR Trunked and Conventional Operation Only) . . . . . . . . . . . . . . . . . . . . 93 CONTENTS To Record a Voice Memo using the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Recorded Message Playback . . . . . . . . . . 81 To Playback a Message using the Preprogrammed Record/Playback Button . . . 81 To Playback a Message using the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Recorded Message Delete . . . . . . . . . . . . 82 To Delete a Message using the Preprogrammed Delete Playback Button . . . . . . . . . . . . . . . . . . . . . . . . . 82 To Delete a Message using the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Recorded Message Transmission . . . . . . 83 Answer Mode . . . . . . . . . . . . . . . . . . . . . . 84 To Enable the Answer Mode Feature . 84 To Record a Message . . . . . . . . . . . . . 84 To Disable the Answer Mode Feature . 85 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . 95 Accessories . . . . . . . . . . . . . . . . . . . . . . 99 Microphones . . . . . . . . . . . . . . . . . . . . . . . 99 Handsfree Kits . . . . . . . . . . . . . . . . . . . . . 99 Exchangeable Button Kits . . . . . . . . . . . . 99 Mounting Kits . . . . . . . . . . . . . . . . . . . . . . 99 Remote Mounts . . . . . . . . . . . . . . . . . . . 100 External Speakers . . . . . . . . . . . . . . . . . 100 Installation and Alarm Kits . . . . . . . . . . . 100 Antennas . . . . . . . . . . . . . . . . . . . . . . . . 100 Service Aids and Programming Equipment Manuals . . . . . . . . . . . . . . . . 100 Manuals . . . . . . . . . . . . . . . . . . . . . . . . . 101 Control Station Kits. . . . . . . . . . . . . . . . . 101 Mobile Data Units Section . . . . . . . . . . . 101 Public Address . . . . . . . . . . . . . . . . . . . . 103 Retrofit Kit. . . . . . . . . . . . . . . . . . . . . . . . 103 Setting the Power Level B . . . . . . . . . . . . 91 Setting the Clock/Alarm. . . . . . . . . . . . . . . 92 Displaying the Time. . . . . . . . . . . . . . . . . . 93 English 6864110R13-OTOC.fm Page 6 Thursday, April 4, 2002 5:52 PM CONTENTS COMPUTER SOFTWARE COPYRIGHTS The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. English SAFETY USER SAFETY, TRAINING, AND GENERAL INFORMATION READ THIS IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION BEFORE INSTALLING AND USING YOUR MOTOROLA MOBILE TWO-WAY RADIO IN A VEHICLE OR AS A CONTROL STATION. receiving (listening) or in standby mode. Note that the approved, supplied batteries for this radio are rated for a 5-5-90 duty cycle (5% talk5% listen - 90% standby), even though this radio complies with the FCC occupational exposure limits at duty cycles of up to 50% talk. Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines: United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1- 1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1- 1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 COMPLIANCE WITH RF ENERGY EXPOSURE STANDARDS Your Motorola two-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environment at duty cycles of up to 50% talk-50% listen and should be used for occupational use only. In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio radiates measurable RF energy only while it is transmitting (during talking), not when it is SAFETY • English • Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2001 (applicable to wireless phones only) • ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) “additional requirements for SMR, cellular and PCS product certification.” SAFETY OPERATIONAL INSTRUCTIONS AND TRAINING GUIDELINES • Transmit only when people outside the vehicle are at least the minimum lateral distance away, as shown in Table 1, from a properly installed, externally-mounted antenna. Table 1 lists the minimum lateral distance for bystanders in an uncontrolled environment from the transmitting antenna at several different ranges of rated radio power for mobile radios installed in a vehicle. Table 1: Rated Power and Lateral Distance To ensure optimal performance and compliance with the occupational/controlled environment RF energy exposure limits in the above standards and guidelines, users should transmit no more than 50% of the time and always adhere to the following procedures: Rated Power of Vehicle-installed Mobile Two-way Radio Minimum Lateral Distance from Transmitting Antenna Less than 7 watts 8 inches (20 centimeters) 7 to 15 watts 1 foot (30 centimeters) 16 to 50 watts 2 feet (60 centimeters) 51 to 110 watts 3 feet (90 centimeters) Transmit and Receive • English To transmit (talk), push the Push-To-Talk (PTT) button; to receive, release the PTT button. Mobile Antennas Fixed Site Antennas • Install antennas at the center of the roof or the center of the trunk deck. These mobile antenna installation guidelines are limited to metal body vehicles. • The antenna installation must additionally be in accordance with: If mobile radio equipment is installed at a fixed location and operated as a control station or as a fixed unit, the antenna installation must comply with the following requirements in order to ensure optimal performance and compliance with the RF energy exposure limits in the above standards and guidelines. a. The requirements of the antenna manufacturer/supplier • Use only Motorola approved supplied antenna or Motorola approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC regulations. Approved Accessories The antenna should be mounted outside the building on the roof or a tower if at all possible. • As with all fixed site antenna installations, it is the responsibility of the licensee to manage the site in accordance with applicable regulatory requirements and may require additional compliance actions such as site survey measurements, signage, and site access restrictions in order to insure that exposure limits are not exceeded. SAFETY b. Instructions in the Radio Installation Manual • For a list of Motorola approved antennas see the appendix of this user manual. English SAFETY ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. It may be necessary to conduct compatibility testing to determine if any electronic equipment used in or around vehicles or near fixed antenna sites is sensitive to external RF energy and if any procedures need to be followed to eliminate or mitigate the potential for interaction between the radio transmitter and the equipment or device. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. 10 English Vehicles To avoid possible interaction between the radio transmitter and any vehicle electronic control modules, for example, ABS, engine, or transmission controls, we recommend that the radio be installed by an experienced installer and that the following precautions be used when installing the radio: 1. Refer to any manufacturers instructions or other technical bulletins or recommendations on radio installation. 2. Before installing the radio, determine the location of the electronic control modules and their harnesses in the vehicle. 3. Route all radio wiring, including the antenna transmission line, as far away as possible from the electronic control units and associated wiring. Driver Safety Potentially Explosive Atmospheres Check the laws and regulations on the use of radios in the area where you drive. Always obey them. Turn off your radio prior to entering any area with a potentially explosive atmosphere. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. When using your radio while driving, please: • Give full attention to driving and to the road. OPERATIONAL WARNINGS For Vehicles With an Air Bag WARNING Do not place a mobile radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a mobile radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle. SAFETY • Pull off the road and park before making or answering a call if driving conditions so require. The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio.” Obey all signs and instructions. For radios installed in vehicles fuelled by liquefied petroleum gas, refer to the (U.S.) 11 English SAFETY National Fire Protection Association standard, NFPA 58, for storage, handling, and/ or container information. For a copy of the LPgas standard, NFPA 58, contact the National Fire Protection Association, One Battery Park, Quincy, MA. 12 English INTRODUCTION Welcome to Motorola’s CDM Series family of radio users. The CDM1550•LS+, the Intelligent Radio, combines the very latest in two-way technology while delivering outstanding functionality at the touch of a button. The CDM1550•LS+ mobile radio operates on PassPort and LTR trunked and conventional radio systems. TRUNKED RADIO SYSTEMS PassPort is an enhanced trunking protocol developed by Trident Micro Systems that supports wide area dispatch networking. A network is formed by linking several trunked sites together to form a single system. This offers users an extended communication coverage area. Additionally, users with PassPort can seamlessly roam among all sites within the network. Seamless roaming means that the radio user does not have to manually change the zones on the radio when roaming from site-to-site. LTR™ Trunked Systems LTR is a transmission based trunking protocol developed by the E. F. Johnson Company for primarily single site trunking applications. In transmission trunking, a repeater is used for only the duration of a single transmission. Once a transmission is completed, that repeater becomes available to other users. This means that a conversation comprised of many transmissions may occur over several different channels within the LTR system. This method of trunking provides system efficiency INTRODUCTION Trunked systems allow a large number of users to share a relatively small number of frequencies or repeaters without interfering with each other. The airtime of all the repeaters in a trunked system is pooled, which maximizes the amount of airtime available to any one radio and minimizes channel congestion. PassPort™ Trunked Systems 13 English by making repeaters available to all users after every transmission. CONVENTIONAL RADIO SYSTEMS Conventional radio systems typically refers to unit-to-unit communications through a single channel. Conventional systems also allow radio users to extend communication coverage by relaying their messages through a repeater. To ensure coordinated use by multiple talkgroups, each radio user must monitor the channel or repeater before transmitting to verify that the system is not currently busy. CDM1550•LS+ RADIO FEATURES INTRODUCTION Note: Radio Wide Features • • • • • • • • • 14-Character Alphanumeric Display 4 Programmable Feature Buttons Up to 15 PassPort and/or LTR Zones with up to 16 Talkgroups per Zone Up to 16 Conventional Channels X-Pand Audio Enhancement Selectable by Conventional Channel, LTR Repeater or PassPort Talkgroup Home Channel Telephone Interconnect User-programmable Phone and Scan Lists Voice Storage Capability PassPort Zone Features • • • • • • • 14 English Throughout this manual there are features listed as trunked and conventional. Trunked indicates the feature functions in both PassPort and LTR zones unless otherwise noted. Conventional indicates the feature functions in Conventional zones only. CDM1550•LS+ Radio Feature Highlights: Unique Mobile Identity Number per Radio Unique Electronic Serial Number per Radio Registration/Deregistration upon power up/ power down Automatic Seamless Roaming between Networked Sites Registered Site and Mobile Identity View User Initiated Roam Request PassPort Primary Group Auto Scan and PassPort Scan PassPort Zone Features (Cont.) • Call Signalling Features - PTT ID (Display of Mobile Identification Number) LTR Zone Features • MDC 1200 Signaling - Call Alert - Selective Call • • - Radio Check - Caller ID Auto Group System, All Group Scan System Scan with 2 Priority Levels Conventional Zone Features • • Monitor and Sticky Permanent Monitor System Scan with 2 Priority Levels INTRODUCTION 15 English INTRODUCTION Notes 16 English 03_Radio Overview.fm Page 17 Tuesday, April 2, 2002 5:48 PM PARTS OF THE RADIO CDM1550•LS+ Model Red/Yellow/Green LED Indicators LCD Screen On/Off/Volume Control Knob Talkgroup/Channel Selector/ Menu Navigation Buttons (Up/Down) Programmable Menu Enter/Select Button 3 (P3) Menu Exit/Escape (Interchangeable) Button Button Microphone Jack Programmable Button 1 (P1) (Interchangeable) Programmable Button 2 (P2) (Interchangeable) Zone Selector/ Editing Buttons (Left/Right) RADIO OVERVIEW RADIO OVERVIEW Programmable Button 4 (P4) (Interchangeable) 17 English 03_Radio Overview.fm Page 18 Tuesday, April 2, 2002 5:48 PM RADIO OVERVIEW On/Off/Volume Control Knob Turns the radio on or off, and adjusts the radio’s volume. Double flashing green Indicates System, All Group Scan or PassPort Group Scan Operation LED Indicators Indicates power-up, scan, or receipt of a talkgroup or selective call (see table below): LED Color Left Button v and Right Button • Used to scroll through the preprogrammed trunked and conventional zones. Used to scroll through menu choices when in Menu Mode. Indicates Steady red Radio is transmitting (PTT button pressed) • Flashing red Radio is attempting to access trunked system (PTT button pressed), or • Radio is receiving (PTT button released) Up Button y and Down Button Call Light feature, or • Used to scroll through the preprogrammed talkgroups of a selected trunked zone, or through conventional channels when in conventional zone. • Used to scroll through menu choices when in Menu Mode. Double flashing yellow Momentary green 18 Radio has powered-up successfully When editing Call, Scan, and Phone lists, v is used as a backspace key and w is used to add a space. Individual Selective Call Received Single flashing Group Selective call received yellow (LTR trunked and conventional operation only) English LED Color 03_Radio Overview.fm Page 19 Tuesday, April 2, 2002 5:48 PM Push-to-Talk (PTT) Button Exit Up Menu/ Select Left Down Right RADIO OVERVIEW Press and hold down this button to talk; release it to listen. Menu Buttons Microphone When sending a message, hold the microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth, and speak clearly into the microphone. Menu/Select Button ) Used to enter Menu Mode. When in Menu Mode, this button is used to make menu selections. Menu Exit/Button ( Used to move to the previous Menu level (short press) or to exit Menu Mode (long press). 19 English 03_Radio Overview.fm Page 20 Tuesday, April 2, 2002 5:48 PM RADIO OVERVIEW Display Indication When the green LED is blinking, indicates that the System, PassPort Scan, or All Group Scan feature has been activated. The top display row displays menu and radio status information: Symbol X-Pand Power Level Monitor Call Received 20 Scan When the green LED is off, indicates that non-prioritized Auto Group Scan has been activated. Indicates activity on a priority 1 talkgroup or channel during System Scan. Indication The X-Pand feature is activated. When in narrow band, this feature improves audio quality. •Priority 1 Scan ( flashing) • Low Power “ R ” or High Power “ S ” is activated. The selected channel is being monitored (conventional operation only). Phone mode is selected. Phone English Symbol A Selective Call or Call Alert has been received . Priority 2 Scan ( steady) • • When the green LED is on, indicates activity on a priority 2 talkgroup or channel during System Scan. • When the green LED is off, indicates prioritized Auto Group Scan has been activated. 03_Radio Overview.fm Page 21 Tuesday, April 2, 2002 5:48 PM Talkaround Indication You are not transmitting through a repeater (Conventional operation only). A Program list is being edited. Programming Mode Clock Signal Strength PassPort Zone OPTIONAL DTMF MICROPHONE (RMN4026) Your radio may be ordered with an optional DTMF (Dual-Tone Multi-Frequency) microphone that has a direct-entry keypad. This microphone has three buttons (A, B, C) below the keypad that can be programmed by your dealer to conveniently activate available radio features. Shows the time (12- or 24-hour). RADIO OVERVIEW Symbol Microphone The more bars, the stronger the signal being received by your radio. Keypad A PassPort zone has been selected. Microphone Jack Plug the optional DTMF Microphone (RMN4026) or other microphone into this jack. Push-to-Talk (PTT) Button Programmable Buttons (A, B, C) 21 English RADIO OVERVIEW 03_Radio Overview.fm Page 22 Tuesday, April 2, 2002 5:48 PM DTMF Microphone Keypad The keypad is used for: • Dialing a phone number • Entering a specific radio ID number when making an MDC radio call • Entering information when programming radio call, scan, and phone lists. • Directly accessing preprogrammed features page 24]) , and buttons [see Each key can generate several different characters. For example, to enter the character “C,” press the 2 button three times. (Refer to the following table on page 23.) 22 English 03_Radio Overview.fm Page 23 Tuesday, April 2, 2002 5:48 PM Entering Characters Using the DTMF Microphone Keypad Button 10 11 12 13 14 Á Ç à á ç È É Ê è é ê Í ì í Ñ Ó Ô ò ó ô Ú ù ú Blank Space ’ ” 15 RADIO OVERVIEW Number of Times Button is Pressed ö 23 English RADIO OVERVIEW 03_Radio Overview.fm Page 24 Tuesday, April 2, 2002 5:48 PM PROGRAMMABLE BUTTONS Your radio has several programmable buttons that can be programmed by your dealer as shortcuts to various radios’ features. Programmable buttons include: • The four front buttons (P1, P2, P3, and P4). • The three buttons (A. B, and C) of the optional DTMF microphone. Some buttons can access up to two features, depending on the type of button press: • Short Press—quickly pressing and releasing the programmable buttons, or • Long Press—pressing and holding the programmable buttons, or • 24 English Hold Down—pressing and holding down the programmable buttons while checking status or making adjustments. The table on page 25 summarizes the programmable features available and shows the page number where the feature is explained. In the “Button” column, have your dealer record the name of the programmable button next to the feature that has been programmed to them. Use the abbreviations for instance P1, P2, P3, and P4 shown in the radio illustrations at the front of this manual. Also, where a choice exists, have your dealer indicate whether the button press is short press (SP), or long press (LP). Check with your dealer for a complete list of features your radio supports. 03_Radio Overview.fm Page 25 Tuesday, April 2, 2002 5:48 PM Feature Indicator Short Press Home Channel — Backlight Control — Monitor § Enter/Exit permaOpen Squelch. nent monitor mode. Phone Power Level Radio Call LED Color Repeater/ Talkaround § Hold Down Page Button Directly access your favorite trunked zone and talkgroup or conventional channel.† — 35 Turn on your radio backlight.† — — Continually monitor channel. — Directly access Phone mode.† — 71 Toggle transmit power level between high and low.† — 93 Directly access radio call menu.† — 47 Toggle between using a conventional repeater or transmitting directly to another radio.† — 34 — 42 — 66 Manually initiate Roam Request* Searching PassPort roaming function. Scan/Delete Nuisance Channel Long Press Turn PassPort Group, All Group, and System scan on or off. Stop PassPort roaming function. Delete a nuisance channel while scanning. † This feature is activated by EITHER a short OR a long press, but not both. § Conventional operation only. ‡LTR trunked operation only. RADIO OVERVIEW Programmable Features *PassPort trunked operation only. 25 English 03_Radio Overview.fm Page 26 Tuesday, April 2, 2002 5:48 PM RADIO OVERVIEW Programmable Features (Continued) Feature Indicator Site/MIN View* — Displays the PassPort site number on which the unit is registered, the home site and unit’s MIN (Mobile Identity Number).† — 41 Speed Dial — Quickly access speed dial phone list.† — 71 Voice Storage Record/Playback — Playback recorded messages. — 82 Voice Storage Playback Exit — Exit Voice Storage Play Back mode.† — 83 Voice Storage Playback Delete — Delete recorded messages.† — Volume Set — Edit Scan List Direct Zone Access — — Long Press Hold Down Record voice memos. Sound a tone for adjusting your radio’s volume level. — Add, delete, or prioritize talkgroups or channels. Direct entry to zone selection menu.† † This feature is activated by EITHER a short OR a long press, but not both. § Conventional operation only. 26 English — Short Press ‡ LTR trunked operation only. Page Button 84 29 66 — 31 *PassPort trunked operation only. 03_Radio Overview.fm Page 27 Tuesday, April 2, 2002 5:48 PM Programmable Features (Continued) Indicator Short Press Long Press Hold Down Page Button Direct Channel Access — Direct access to a trunked talkgroup or conventional channel through a Smart Microphone † Horn and Lights — Toggles external alarm feature or cancels a triggered alarm.† — 35 Auxiliary Control (1/2) — Activates or deactivates a pin on the accessory connector.† — — Status§ — Direct entry to the message menu.† — 50 Message§ — Direct entry to the message menu.† — 51 Emergency§ Initiate Emergency Alert — 56 Cancel Emergency Alert † This feature is activated by EITHER a short OR a long press, but not both. § Conventional operation only. ‡ LTR trunked operation only. — 31 RADIO OVERVIEW Feature *PassPort trunked operation only. 27 English 03_Radio Overview.fm Page 28 Tuesday, April 2, 2002 5:48 PM RADIO OVERVIEW Audio Indicators for Programmable Buttons High-Low Tone In addition to having visual indicators, some programmable buttons use tones to indicate one of two modes: High-Low Tone Low-High Tone Scan Stop scan Start scan Power Level High power selected Low power selected Repeater/ Talkaround Uses conventional repeater Does not use conventional repeater Low-High Tone 28 English Button 04_GetStarted.fm Page 29 Tuesday, April 2, 2002 4:38 PM ADJUSTING THE VOLUME GETTING STARTED TURNING THE RADIO ON OR OFF On/Off/Volume Control Knob OFF Push the On/Off/ Volume Control knob. Push the On/Off/ Volume Control knob until you hear a click and the display clears. If power-up is successful, you hear the Self-Test Pass Tone –or– Hold down the Volume Set button (see page 26). You hear a continuous tone. Turn the On/Off/Volume Control knob to the desired volume level. Release the Volume Set button. GETTING STARTED ON Turn the On/Off/Volume Control knob clockwise to increase the volume, or counterclockwise to decrease the volume. and see the LED momentarily turn green. If the radio fails to power up, you hear the Self-Test Fail Tone 29 English 04_GetStarted.fm Page 30 Tuesday, April 2, 2002 4:38 PM SELECTING A TRUNKED ZONE AND TALKGROUP GETTING STARTED Note: Throughout this manual there are features listed as trunked and conventional. Trunked indicates the feature functions in both PassPort and LTR zones unless otherwise noted. Conventional indicates the feature functions in Conventional zones only. Up to 15 PassPort and/or LTR trunked zones (containing 16 talkgroups each) can be programmed into your radio. To Send a Trunked Call Hold the microphone in a vertical position at a distance of about 1 to 2 inches (2.5 to 5 cm) from your mouth. Press and hold the PTT button. –or– Press and release the PTT button and wait 3 seconds. • v or w to select the appropriate trunked zone. y or z until you see the desired preprogrammed talkgroup on the display. 30 If access to the trunked system was successful, the red LED indicator lights steady. To select a trunked zone and talkgroup: Note: N (the PassPort Zone symbol) appears when a PassPort Zone has been selected. English SENDING A TRUNKED CALL • In addition, your dealer can program your radio to sound a short, high-pitched (talk permit) tone, indicating successful trunked system access. If access to the trunked system was unsuccessful, the red LED indicator flashes and a low-pitched (talk prohibit) tone sounds, indicating that the system was busy or out-of-range. 04_GetStarted.fm Page 31 Tuesday, April 2, 2002 4:38 PM With the PTT button depressed, speak clearly into the microphone Release the PTT button to listen. DIRECT ZONE ACCESS The Direct Zone Access feature offers an alternative way of accessing a trunked or conventional zone. To Activate Direct Zone Access Press the preprogrammed Direct Zone Access button (see page 27). Up to a total of 16 conventional channels, in one or more conventional zones, can be programmed into your radio. y or z until you see the desired zone on the display. u to confirm your selection. To Select a Conventional Zone and Channel v or w to select the appropriate conventional zone. y or z until you see the desired conventional channel on the display. DIRECT CHANNEL ACCESS The direct channel access feature allows you to directly access a specific trunked talkgroup or conventional channel within the zone you have currently selected. This feature can be programmed on one of the radio programmable buttons (P1, P2, P3 or P4) and/ or any DTMF microphone (RMN4026) programmable buttons (A, B or C). GETTING STARTED SELECTING A CONVENTIONAL ZONE AND CHANNEL 31 English 04_GetStarted.fm Page 32 Tuesday, April 2, 2002 4:38 PM To Start Activate Direct Channel Access Using the DTMF microphone: Using the radio’s programmable buttons: Press the preprogrammed Direct Channel button. The current talkgroup or channel flashes intermittently. The current talkgroup or channel flashes intermittently. GETTING STARTED YR TKGP ALIAS YR TKGP ALIAS Up or down arrow y or z to select the appropriate Trunked talkgroup or channel. If Menu/Channel Up feature is preprogrammed on the DTMF microphone press it to select the appropriate talkgroup or channel. Press y or z The new selected talkgroup or channel appears on the display NW TKGP ALIAS Up or down arrow y or z to select the appropriate Trunked talkgroup or channel. –or– Press again the preprogrammed Direct Channel button. –or– Press the preprogrammed Direct Channel button (A, B, or C). Press again the preprogrammed Direct Channel button. –or– Press select/enter button on the microphone (if preprogrammed). The new selected talkgroup or channel appears on the display. NW TKGP ALIAS 32 English 04_GetStarted.fm Page 33 Tuesday, April 2, 2002 4:38 PM SENDING A CONVENTIONAL CALL Note: In the United States, FCC regulations require you to monitor the conventional channels before sending a call. The monitor feature (see page 25) can be accessed through one of your programmable buttons. RECEIVING A TRUNKED OR CONVENTIONAL CALL Turn your radio on. Adjust your radio’s volume (see page 29). v or w to select the desired trunked or conventional zone, then y or z until you see the desired preprogrammed talkgroup or conventional channel on the display. To send a conventional call: Hold the microphone in a vertical position at a distance of about 1 to 2 inches (2.5 to 5 cm) from your mouth. Press the PTT button and speak clearly into the microphone. The red LED indicator lights steady while the call is being sent. Release the PTT button to listen. • Make sure the PTT button is released. Listen for voice activity. The red LED indicator flashes when your radio is receiving. GETTING STARTED Note: In PassPort mode, the Mobile Identity Number (XXXX) of the calling radio appears on the display if enabled. XXXX 33 English 04_GetStarted.fm Page 34 Tuesday, April 2, 2002 4:38 PM REPEATER OR TALKAROUND J MODE (CONVENTIONAL OPERATION ONLY) Talkaround Mode enables you to communicate with another radio when either: • The repeater is not operating GETTING STARTED –or– • Your radio is out of the repeater’s range but within communicating distance of another radio. Note: The J symbol appears on the LCD screen when Talkaround Mode is selected. To Select either Repeater Mode or Talkaround Mode Press the preprogrammed Repeater/ Talkaround button (see page 25) to toggle between Repeater Mode and Talkaround Mode. 34 English –or– ) to enter Menu Mode. y or z until Rptr/Talkarnd ) to select Rptr/Talkarnd y or z until Talkarnd Mode –or– Talkarnd Mode ) to confirm your selection. 04_GetStarted.fm Page 35 Tuesday, April 2, 2002 4:38 PM CALL LIGHT HORN AND LIGHTS (TRUNKED OPERATION ONLY) When you are away from your vehicle, the Horn and Lights feature notifies you when a call is received by activating your vehicle’s horn and lights. This feature can be triggered by a call alert in LTR mode. It also can be associated with call light in LTR and PassPort mode. The Call Light indicator informs you that you have received a call from a specified talkgroup (as programmed by your dealer). The yellow LED indicator flashes continuously, indicating that a call has been received. To Turn the Call Light Off Turn the radio off, then on again. • Select another trunked or conventional zone. • Press the PTT button. • Press any preprogrammed button. To Activate Horn and Lights Programmed with Call Light (Trunked Operation Only) HOME CHANNEL The Home Channel feature allows you to instantly access your favorite trunked talkgroup or channel at the touch of a button. To Activate Home Channel Press the preprogrammed Home Channel button (see page 25). Press the preprogrammed Horn and Lights button. The LED flashes yellow continuously, indicating that a call has been received. you see YR CURRENT TKGP Once the delay timer has expired, the horn and lights of the vehicle go off. Press any buttons on the radio or the DTMF microphone to deactivate it. GETTING STARTED • 35 English 04_GetStarted.fm Page 36 Tuesday, April 2, 2002 4:38 PM To Activate Horn and Lights Programmed with Call Alert (LTR Trunked Operation Only) Press the preprogrammed Horn and Lights button. When you receive a call alert, you can see the preprogrammed name or ID of the calling radio: GETTING STARTED YOUR NAME OR ID Note: If preprogrammed, alert tones (either once or continuously) may sound. Press any buttons on the radio or the DTMF microphone to deactivate it. Note: There are options available in the CPS (Customer Programming Software), which don’t require you to manually activate Horn and Lights. Please see your dealer for additional information. REMOTE MONITOR (LTR TRUNKED AND CONVENTIONAL OPERATION ONLY) Remote Monitor allows you to automatically key-up another radio to listen-in on all surrounding audio. This feature can be initiated by a dispatcher to a mobile radio, or from a mobile radio to another mobile radio. To Activate Remote Monitor ) to enter Menu Mode. y or z until Radio Call ) to select Radio Call y or z until Remote Monitor ) to select the appropriate call list member: MDC CALL 01 Note: An audio or visual indication may come up on the receiving radio if preprogrammed by your dealer. 36 English 04_GetStarted.fm Page 37 Tuesday, April 2, 2002 4:38 PM To cancel Remote Monitor, press any button on the radio. Note: Remote monitor automatically ceases after one transmit and one receive cycle. GETTING STARTED 37 English 04_GetStarted.fm Page 38 Tuesday, April 2, 2002 4:38 PM GETTING STARTED Notes 38 English PASSPORT TRUNKING PassPort is an enhanced, wide-area trunking protocol developed by Trident Micro Systems. Up to 128 trunked sites can be linked together to form one PassPort system, which means that your communications can extend far beyond the reach of a single trunked site. SEAMLESS ROAMING Initial Registration Before communications with your talkgroup can begin, your radio needs to register on the PassPort system. Registration automatically takes place upon radio power up or after selecting the desired PassPort zone on the selector knob. What you see: 1 Upon radio Power up, you see: (if you select a PassPort zone after the radio is powered up, see step 2). PASSPORT 2 The selected PassPort zone alias appears on the display. YOUR ZONE ALIAS 3 The selected Talkgroup Alias appears on the display. TLKGRP ALIAS PASSPORT TRUNKING PassPort Trunking systems offer you the ability to seamlessly roam among all sites in a network. Seamless Roaming means that you do not have to manually change the zones on the radio when roaming from site-to-site. As you roam throughout a PassPort System’s coverage area, your CDM1550•LS+ radio is regularly monitoring the RSSI (Received Signal Strength Indication) level of the site on which you are currently registered. In addition, if the signal strength falls below the acceptable threshold pre-programmed by your dealer, your radio starts monitoring the RSSI level of adjacent sites within the network. This allows the CDM1550•LS+ radio to quickly roam to the site with the strongest signal, which provides you with optimal audio quality throughout your communications. 39 English Note: If the radio performs a more extensive frequency search in order to attempt successful registration, you may see on the display: SEARCHING 4 Upon successful PassPort Registration, you see: REG SITE XXX Note: Your radio sounds a “Low-High” tone upon successful PassPort System registration. The XXX number indicates the site within the PassPort system on which you have registered. TLKGRP ALIAS PASSPORT TRUNKING After successfully registering at a site, the selected PassPort talkgroup alias appears and remains on the display. Roaming and Registering Between Sites Once initial registration with the PassPort system has occurred, your radio constantly monitors the RSSI to ensure an acceptable signal level is maintained (as programmed by your dealer). When the RSSI in the radio falls below this acceptable level, the CDM1550•LS+ attempts to roam to and register onto another site within the PassPort system. This process happens automatically and requires no action by you. What you see: 1 When the radio is searching for a new site or attempting successful registration to a site, you see on the display: SEARCHING Note: This message is displayed until successful registration. 2 When the radio has successfully registered to the new PassPort System, XXX indicates the site number you see on the display. REG SITE XXX 40 English 3 The selected PassPort talkgroup alias appears and remains on the display. TLKGRP ALIAS The display indicates the Home Site Number (HSID) and Mobile Identity Number. IAM XXX-YYYYY XXX indicates the HSID, YYYYY indicates the MIN. SITE/MIN VIEW There may be circumstances when you want to view the number of the PassPort site on which you are registered as well as your Mobile Identity Number (MIN). Note: This message can be activated if the radio is not registered. To Start And Stop Viewing Site/Min 1 Press the preprogrammed SITE/MIN View button (see page 26). The display shows the number of the site on which you are currently registered. site now XXX PASSPORT TRUNKING Note: If the preprogrammed button is activated prior to or during registration, a bad key chirp is sounded and you see on the display: site now n/a 41 English ROAM REQUEST Because of the RSSI feature, the CDM1550•LS+ radio automatically roams to a different site when the signal from the registered site becomes too weak for quality communication. This RSSI threshold is programmed by your dealer. However, if you believe the signal strength would be better on another site, you may want to manually initiate the roaming process. This feature is called Roam Request. To Start a Roam Request 1 Press the preprogrammed Roam Request button (see page 25). 2 When the radio is searching for a new site or attempting successful registration to a site, you see on the display: PASSPORT TRUNKING SEARCHING REG SITE XXX Note: A bad key chirp may sound and you see on the display: Roam Not Avail • When registration to a site with a higher RSSI than your current site is unavailable. • When the preprogrammed button is pressed before the radio has collected its “neighbor list”. A Neighbor list” is a list of frequencies from adjoining sites within the PassPort system that are used during the roam process. • When the radio is programmed for a single home system. In these cases, wait a few seconds and try again. 42 English 3 When the radio has successfully registered to the new PassPort System, you see on the display: 4 The selected PassPort talkgroup alias appears and remains on the display: TLKGRP ALIAS To Cancel a Roam Request Press and hold the preprogrammed Roam Request button (see page 25) again. You see: Note: Cncl Roam Req TROUBLESHOOTING While in PassPort zones, there are some specific display messages that indicate you should contact your dealer for assistance. Message What it Means “Invalid Group ID” Your dealer needs to verify talkgroup programming in your radio or the PassPort system. “DISABLED” Your radio requires reactivation on the PassPort system (not applicable to conventional and LTR functionality). Blank display upon power up . Your radio needs to be returned to your dealer for reactivation or service. The radio then attempts to return to the previously registered site. PASSPORT TRUNKING 43 English PASSPORT TRUNKING Notes: English 44 RADIO CALLS MAKING A SELECTIVE CALL (LTR TRUNKED AND CONVENTIONAL OPERATION ONLY) You can make a selective call to a particular radio or to a group of radios, as programmed by your dealer. –or– Enter with the DTMF microphone the ID number of the radio you want to call. 7 Press the PTT button to send the call. To Make a Selective Call • The radio sounds a continuous tone, if programmed by your dealer. Press the preprogrammed Radio Call button (see page 25), and proceed to step 4. • The LED lights a solid yellow. RADIO CALLS 6 y or z to locate the desired ID in the Radio Call List. 8 Press the PTT button and talk; release the PTT button to listen. –or– 1 ) to enter menu mode. If not received, you see: 2 y or z until Radio Call 3 ) to select Radio Call 4 y or z until Selective Call –or– 5 ) to select Selective Call Hold down ( to exit menu mode. No Acknowledge 9 ( to return to Selective Call 45 English RADIO CALLS RECEIVING A SELECTIVE CALL F To Send a Call Alert Page (LTR TRUNKED AND CONVENTIONAL OPERATION ONLY) Press the preprogrammed Radio Call button (see page 25) and proceed to step 4: When you Receive a Selective Call The display shows F and the preprogrammed name or ID of the calling radio. 2 y or z until Radio Call • The LED indicator flashes yellow, if programmed by your dealer. 3 ) to select Radio Call • You hear an alert tone. 4 y or z until Call Alert 5 ) to select Call Alert To answer the call, press the PTT button. Note: Unless you make a Selective Call back to the caller, your response is heard by all members of your talkgroup. 6 y or z to locate the desired ID in the Radio Call List. SENDING A CALL ALERT PAGE –or– (LTR TRUNKED AND CONVENTIONAL OPERATION ONLY) Enter with the DTMFmicrophone the ID number of the radio you want to page. You can alert another person by sending a Call Alert page. 46 English 1 ) to enter menu mode. • 7 Press the PTT button, you see: RECEIVING A CALL ALERT PAGE and the preprogrammed name or ID alternating on the display. • The LED alternates between a solid yellow and solid red while the call is in process. 8 If the Call Alert page is received by the target radio, you see: Acknowledge If not received, you see: No Acknowledge • The radio sounds a short alert tone if, programmed by your dealer. 9 ( to return to Call Alert –or– (LTR TRUNKED AND CONVENTIONAL OPERATION ONLY) When You Receive a Call Alert Page • The display shows F Call Received and the preprogrammed name or ID of the calling radio. • You hear four alert tones, either once or continuously, as programmed by your dealer. • The LED indicator flashes a single yellow for a group call, or flashes a double yellow for an individual call. RADIO CALLS Call in Prog To answer the page, press the PTT button; to cancel the page, press any other button. Note: Your radio displays only the last Call Alert page received. Also, your radio does not receive any Selective Calls until you clear the page. Hold down ( to exit menu mode. 47 English RADIO CALLS RADIO CHECK (LTR TRUNKED AND CONVENTIONAL OPERATION ONLY) Radio Check allows you to determine if a radio is within the range of the trunked system and turned on, without disturbing the user of that radio. This feature can also be used when attempts with Selective Call and Call Alert fail. To Perform a Radio Check 1 ) to enter menu mode. you see: Call In Prog 8 If the Radio Check is received by the target radio, you see: Acknowledge If not received, you see: No Acknowledge 9 ( to return to Radio Call 2 y or z until Radio Call –or– 3 ) to select Radio Call Hold down ( to exit menu mode. 4 y or z until Radio Check 5 ) to select Radio Check 6 y or z to locate the desired ID in the Radio Call list –or– Enter the ID number of the radio you are checking. 48 English 7 Press the PTT button, SENDING A STATUS (CONVENTIONAL OPERATION ONLY) This feature gives you the ability to send a status update to the base. The status feature makes more efficient use of the channel compared to voice transmissions. Status updates of up to 14 characters may be programmed by your dealer. SENDING A MESSAGE To Send a Status ) to enter Menu Mode. y or z until Status ) to select Status y or z to locate the desired status in the preprogrammed list. –or– when using the enhanced keypad microphone only, enter the number of the status you wish to send. –or– if programmed by your dealer (see page 27), (CONVENTIONAL OPERATION ONLY) This feature gives you the ability to send and receive preprogrammed messages. Data messages make more efficient use of channels compared to voice transmissions. Messages of up to 14 characters may be programmed by your dealer. RADIO CALLS To Send an Electronic (Data) Message ) to enter Menu Mode. y or z until Message ) to select Message press the button that has been preprogrammed for a specific status. Note: You cannot retransmit the current status update. 49 English RADIO CALLS y or z to locate the desired message in the preprogrammed list. –or– when using the enhanced keypad microphone only, enter the number of the message you wish to send. –or– if programmed by your dealer (see page 27), press the button that has been preprogrammed for a specific message. RECEIVING A MESSAGE (CONVENTIONAL OPERATION ONLY) When your radio receives a message: • • You hear two alert tones. The yellow LED indicator flashes. • You see: Msg Received alternating with the preprogrammed alias. Note: If you receive a message that is programmed into your radio, the display will alternate with the following: Message #_ and No Alias RESPONDING TO EMERGENCY ALERTS E (CONVENTIONAL OPERATION ONLY) Your radio offers choices for initiating and responding to Emergency Alert communications. Choices may include: • 50 English Emergency Cycles - Allows the radio to automatically cycle between transmit and receive mode over a preprogrammed number of times by keying with voice after it • • Note: All the choices listed above are dealer preprogrammed. See your dealer for more details. Decoding an Emergency Alarm If preprogrammed by your dealer, and provided the signaling protocol supports it, your radio decodes (responds to) an Emergency Alarm or Emergency Call by: • Sounding a unique, repeating alert tone • Activating an external alarm • Displaying alternating message parts on a single line, similar to the following example RADIO CALLS • has received an Acknowledge to the alarm you send. The default number of transmits is one (10, maximum); the default value of the retransmit interval is 5 seconds (one, minimum; 60, maximum). Emergency Alarm/Call - Gives you access to a voice resource, on a priority basis, over all other types of call traffic. Emergency Remote Monitor - Enables the dispatcher to activate the transmit circuit of your radio, during an Emergency, to hear the situation through your microphone. See page 53 for more about sending an Emergency Remote Monitor. Remote Monitor - Enables the dispatcher to activate the transmit circuit of your radio, during a normal dispatch, to hear the situation through your microphone. See page 54 for information about sending a Remote Monitor. Emergency • the word Emergency, followed by MDC CALL 01 • Emergency Alias from the Radio Call List (example, MDC CALL 01), followed by 51 English RADIO CALLS • Timestamp of the Emergency Alert (example, 03:55). 03:55 • Flashing the E icon (while decoding only; lights steady when encoding) Multiple Queued Emergencies Clearing the existing displayed Emergency shows the next in the queue, if one exists.The display updates and shows “Emerg (queued number) of (total number)”. If no additional Emergencies are queued, the radio exits Emergency mode and resumes normal mode. Three Minute Timer Responding to an Emergency starts a threeminute timer. The radio does not generate another Emergency Alert tone against that Emergency Alias or ID until the three-minute period expires. If cleared within 3 minutes, the alarm will regenerate the alert. If the radio receives another Emergency Alert from the same Alias or ID, the radio acknowledges the Emergency but does not restart the tone, 52 English activate the external alarm, or display updated information. After the Timer Expires If the three-minute timer has expired for a specific Emergency Alias or ID, and the radio decodes an Emergency that is currently in queue, the radio: • • • • Acknowledges the Emergency Restarts the Emergency Alert tone Activates the external alarm Updates the time stamp on the matching Emergency Note: If the Radio Call List does not include an alias for the radio ID, the ID displays. Radios that do not support the signaling protocol sound the alert tone, activate the external alarm and display data. SENDING AN EMERGENCY REMOTE MONITOR (CONVENTIONAL OPERATION ONLY) (CONVENTIONAL OPERATION ONLY) To Clear an Emergency Alert As your radio responds to an Emergency Alert, only the Emergency Queue menu is available. Press any button on the radio to cancel the Emergency Alert tone. Press (or activate) an external pushbutton or foot switch. To access the Emergency Queue menu: ) to enter Menu Mode. The radio displays the list of aliases currently in the Emergency queue, similar to that shown, oldest to newest. Note: You must press an external switch to clear the visible Emergency Alias and display the next queued Emergency Alias, if present. You must clear all decoded Emergency Alerts before encoding (sending) your own Emergency Alert. RADIO CALLS CLEARING AN EMERGENCY ALERT E MDC CALL 01 z or y to view the next oldest Emergency Remote Monitor packet and to choose the packet to send. Press the PTT to send the packet. 53 English RADIO CALLS SENDING AN EMERGENCY ALERT E (CONVENTIONAL OPERATION ONLY) A priority Emergency Alert can be sent to a specific radio or dispatch center by pressing: • • • A button preprogrammed by your dealer (see page 27). The foot switch A pushbutton accessory Emergency Alerts have priority over all other calls. The E symbol will appear on the display when your radio is in the Emergency Alert state. An Emergency Alert can be programmed to: Show E and sound a tone –or– • Show the normal display –or– • Activate the microphone so that all activity can be transmitted (for a predetermined amount of time). See your dealer for more information. • To cancel the Emergency Alert, press and hold down the preprogrammed Emergency button. 54 English SENDING A REMOTE MONITOR The Remote Monitor gives the ability to activate the transmit circuit of your radio – both silently and normally – and key it. The Remote Monitor feature depends on how your radio responds to the Remote Monitor Command. Upon receiving a Remote Monitor Command, the radio: 1. Keys the transmitter. 2. Acknowledges the command 3. Sends the PTT-ID 4. Activates the microphone. Note: If a remote microphone is attached, it responds. Remote Monitor capability depends on which of two modes are preprogrammed: • Silent Mode – When the command is sent in Silent Mode, and the receiving radio keys and transmits for the time set by the Remote Monitor Command, the receiving radio will not generate an indicator of the event. • Non-Silent Mode – When the command is sent in Non-Silent Mode, and the receiving radio keys and transmits for the time set by The amount of time that the radio remains in receive mode or in transmit mode is set by the Remote Monitor Command and the time settings in the radio. When in this state, touching any button on the radio takes it out of the Remote Monitor mode. See your dealer for more details. Note: When your radio has been disabled by the base station, all controls will be inoperative except for the On/Off button. When the radio is powered up, You see: Radio Disabled EDITING A RADIO CALL LIST K (LTR TRUNKED AND CONVENTIONAL OPERATION ONLY) Your radio is equipped with a security feature that can temporarily render the unit inoperative when an inhibit signal is sent from the base station. Your radio has a Radio Call list that contains the names and radio IDs of several talkgroups or individuals. The ID numbers in the Radio Call List are programmed by your dealer, and cannot be changed from your radio. However, you can edit the names associated with these IDs. The K symbol appears on the display when you are editing. This feature is commonly used to disable radios: Note: • • • To Edit a Call List Entry SELECTIVE RADIO INHIBIT (CONVENTIONAL OPERATION ONLY) In case of theft When your vehicle is being serviced For system control reasons RADIO CALLS the Remote Monitor Command, the receiving radio will generate an indicator of the event. The radio cannot receive any calls while you are editing. 1 ) to enter menu mode. 2 y or z until Program Lists 55 English RADIO CALLS 3 ) to select Program Lists 4 y or z until RadioCall List 5 ) to select RadioCall List 6 y or z until Edit Entry? 7 ) to select Edit Entry? NAME AND CALL TONE TAGGING (LTR TRUNKED AND CONVENTIONAL OPERATION ONLY) You can program your radio to sound a particular alert tone when a specific user is calling (name tone tagging), or when receiving a particular type of radio call (call tone tagging). Note: 8 y or z until you locate the desired entry. 9 ) to select the entry. Name and call tone tagging are valid only for selective calls and call alerts. There are seven alert tones to select from. (see page 87.) To Tag a Specific User’s Name 10 Use your keypad to edit the entry. 1 ) to enter menu mode. 11 ) to save your changes. Edit Entry? 12 ( to return to Edit Entry? –or– Hold down ( to exit menu mode. 2 y or z until Name Tone Tag 3 ) to select Name Tone Tag 4 y or z until you see the name you want to tag. 5 ) to confirm the selection. 56 English 7 ) to confirm the selection, you see: 8 ( to return to Name Tone Set Name Tone Tag –or– Hold down ( to exit menu mode. To Tag a Type of Radio Call 7 ) to confirm the selection. 8 y or z until you see and hear the tone you want to use for this type of call. 9 ) to confirm the selection, you see: 10 ( to return to Call Tone Set RADIO CALLS 6 y or z until you see and hear the tone you want to use for this name. Call Tone Tag –or– Hold down ( to exit menu mode. 1 ) to enter menu mode. 2 y or z until Audio/Tones 3 ) to select Audio/Tones 4 y or z until Call Tone Tag 5 ) to select Call Tone Tag 6 y or z until you see the call type you want to tag. 57 English RADIO CALLS Notes: 58 English
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2002:02:21 12:39:55Z Creator : AdobePS5.dll Version 5.1.1 Modify Date : 2002:04:05 09:26:45-06:00 Page Count : 59 Creation Date : 2002:02:21 12:39:55Z Producer : Acrobat Distiller 4.05 for Windows Mod Date : 2002:04:05 09:26:45-06:00 Metadata Date : 2002:04:05 09:26:45-06:00 Title : 6864110R13-O_cvr.qxd Has XFA : NoEXIF Metadata provided by EXIF.tools