Motorola MC35 Quick Start Guide User Manual To The 5b687d5e Bf75 4484 A182 0ef9512b3872
User Manual: Motorola MC35 to the manual
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Pantone 7459 Pantone 1375 Gray MC35 FEATURES GETTING STARTED KEYPADS Quick Start Guide 12 13 14 15 16 17 11 1 2 10 Main Battery Speaker Camera Lens (Optional) Camera Flash (Optional) Infrared (IR) Port SD/MMC Expansion Slot 18 19 20 21 22 Stylus Push To Talk Button Power Button Camera Button* Battery Release Latch 1 2 3 4 5 6 Send Button Start Button Left Soft Button Joystick Right Soft Button OK Button 1 3 9 4 3 2 22 12 13 14 15 7 8 9 10 11 1 Install the Battery Pack End Button Orange Key Star Key Backlight/0 Key Messaging Button Align the tabs on the battery pack with the groves on the MC35, then insert the battery pack into the back of the device. 2 Charge the MC35 NOTE: Use the clip plug applicable in your country. 7 8 9 10 11 Connector Microphone Keypad Charging LED Phone Speaker 3 Start the MC35 20 19 16 17 LCD Touch Screen GSM Status/Notification LED Volume Up/Down Button Camera/Bar Code Switch Reset Button Earphone Jack 5 Connect the MC35 to a Host Computer The battery pack locks to the chassis with an audible click. 7 1 2 3 4 5 6 Download ActiveSync 4.0 or higher from http://www.microsoft.com and follow the instructions to install ActiveSync onto the host computer. LED status during charging: Flashing orange: Charging Solid orange: Charging complete 6 8 6 4 Install ActiveSync 7 5 4 21 5 After the AC connection is made, the charging LED indicator on the front panel lights orange. 18 11 8 10 9 Orange Key * Programmable on no-camera versions. After you have initially charged the MC35 for approximately eight hours, the device is ready for use. Use this key to access the secondary layer of characters and actions. > Press the key once to activate this mode followed by another key. > Press the key twice to lock this mode. Press the key a third time to unlock. > Press and hold the key while entering characters or actions. 1 Install the replaceable clip plug to the AC adapter. Slide the clip plug into the clip plug holder and snap into place. The clip plug locks to the clip plug holder with an audible click. 2 Plug the AC adapter cable into the connector on the bottom of the MC35. 3 Connect the AC adapter power cable into an electrical outlet. 1 Turn on the MC35 by pressing the Power button the right side of the device. located on 6 Create a Partnership Follow the onscreen ActiveSync instructions to establish a connection between the MC35 and the computer. 2 Follow the onscreen instructions on the Welcome Screen Wizard. IMPORTANT: For initial use, charge the MC35 for approximately eight hours. Thereafter, charge the MC35 everyday to recharge the battery to full capacity. Charge the MC35 using the USB sync cable. NOTE : To reset the MC35, press the reset button with the tip of the stylus. SUPPORT INFORMATION More information on the MC35 Visit the Symbol Web site at http://www.symbol.com/mc35 ACCESSORIES Install the Memory Card 1 Open the expansion slot cover. Setting up and using the MC35 MC35 User Guide Available at: http://www.symbol.com/mc35 PHONE SETUP 1 Install the SIM Card 1 Press the Power button to turn off the MC35. 2 Slide the battery latch to the unlock icon The battery pack ejects slightly. to remove the battery. 3 Remove the battery pack from the MC35. Product Video Tutorial BAR CODE READING Visit the Symbol Web site at http://www.symbol.com/mc35 Connecting and synchronizing with the host computer 2 Enter Your PIN 4 Turn Off the Phone Function 3 With rear panel facing you, slide the SIM card holder to the right. 4 Lift the holder halfway from the recess area. 5 Insert the SIM card into SIM card holder. After installing the SIM card activate your mobile service connection. In most cases, SIM cards are preset with a PIN (Personal Identity Number), provided by your service provider. NOTE : The proper position of the SIM card—the card connector (i.e., gold area) should be facing downward with the bevelled corner fitting the lower left corner of the recess area. 1 Press the Power button to turn on the MC35. 1 Launch the Wireless Manager application. On the Today screen, tap the Wireless Manager icon. or On the Today screen, tap the signal icon and select Wireless Manager. 2 Tap Start – Help within the specific program. 3 Travel Charger Hands-free Headset Protective Boot Stylus 3-pack Standard Life Battery Extended Life Battery 6 Press the SIM card holder down. 7 Slide the SIM card holder to the left to lock it into place. 2 3 To remove the SD/MMC card, push down on the card and release. The card ejects from the slot. Quick Start Guide http://www.symbol.com/mc35 SYMBOL TECHNOLOGIES, INC. One Symbol Plaza Holtsville, New York 11742-1300 Charging LED: Flashing orange: Battery charging On the Today screen, tap the Wireless Manager icon. or 7 72-93873-01 Rev A - December 2006 Notifications 3 Turn On the Phone Function 1 Launch the Wireless Manager application. 1 Vehicle Kit - Auto Mounting Kit - Auto Charger - Hands-free Headset Leather Case USB Charge/Sync Cable MC35 4 2 Slide the SD/MMC card into the slot and push in until it locks into place. Accessories © 2006 Symbol Technologies, Inc. 5 1 Information on using programs on the MC35 MC35 Regulatory Guide 2 On the Wireless Manager screen, tap Phone to turn off phone function. 3 Enter the PIN from your service provider. 4 Tap Enter. ActiveSync®Help on the host computer. To view help, start ActiveSync®, click Help - Microsoft ActiveSync Help. Service and Warranty 2 Tap Start > Phone. 8 Reinstall the battery pack. 6 On the Today screen, tap the signal icon Wireless Manager. Solid orange: Charging complete and select 2 On the Wireless Manager screen, tap Phone to turn on the phone function. The signal icon changes indicating the MC35 is searching for a mobile connection. This may take a few seconds. The signal icon changes to and to once a mobile connection is established. GSM Status/Notification LED: Fast flashing green: GSM activity Solid green: Voice call in progress Flashing red: System notification 1 Place the Camera/Bar Code switch to the Bar Code position. 2 Launch a bar code reading application on MC35. 3 Point the MC35 toward the bar code and align if necessary. 4 Press the Camera button to read the bar code data. Pantone 7459 Pantone 1375 Gray MC35 FEATURES GETTING STARTED KEYPADS Quick Start Guide 12 13 14 15 16 17 11 1 2 10 Main Battery Speaker Camera Lens (Optional) Camera Flash (Optional) Infrared (IR) Port SD/MMC Expansion Slot 18 19 20 21 22 Stylus Push To Talk Button Power Button Camera Button* Battery Release Latch 1 2 3 4 5 6 Send Button Start Button Left Soft Button Joystick Right Soft Button OK Button 1 3 9 4 3 2 22 12 13 14 15 7 8 9 10 11 1 Install the Battery Pack End Button Orange Key Star Key Backlight/0 Key Messaging Button Align the tabs on the battery pack with the groves on the MC35, then insert the battery pack into the back of the device. 2 Charge the MC35 NOTE: Use the clip plug applicable in your country. 7 8 9 10 11 Connector Microphone Keypad Charging LED Phone Speaker 3 Start the MC35 20 19 16 17 LCD Touch Screen GSM Status/Notification LED Volume Up/Down Button Camera/Bar Code Switch Reset Button Earphone Jack 5 Connect the MC35 to a Host Computer The battery pack locks to the chassis with an audible click. 7 1 2 3 4 5 6 Download ActiveSync 4.0 or higher from http://www.microsoft.com and follow the instructions to install ActiveSync onto the host computer. LED status during charging: Flashing orange: Charging Solid orange: Charging complete 6 8 6 4 Install ActiveSync 7 5 4 21 5 After the AC connection is made, the charging LED indicator on the front panel lights orange. 18 11 8 10 9 Orange Key * Programmable on no-camera versions. After you have initially charged the MC35 for approximately eight hours, the device is ready for use. Use this key to access the secondary layer of characters and actions. > Press the key once to activate this mode followed by another key. > Press the key twice to lock this mode. Press the key a third time to unlock. > Press and hold the key while entering characters or actions. 1 Install the replaceable clip plug to the AC adapter. Slide the clip plug into the clip plug holder and snap into place. The clip plug locks to the clip plug holder with an audible click. 2 Plug the AC adapter cable into the connector on the bottom of the MC35. 3 Connect the AC adapter power cable into an electrical outlet. 1 Turn on the MC35 by pressing the Power button the right side of the device. located on 6 Create a Partnership Follow the onscreen ActiveSync instructions to establish a connection between the MC35 and the computer. 2 Follow the onscreen instructions on the Welcome Screen Wizard. IMPORTANT: For initial use, charge the MC35 for approximately eight hours. Thereafter, charge the MC35 everyday to recharge the battery to full capacity. Charge the MC35 using the USB sync cable. NOTE : To reset the MC35, press the reset button with the tip of the stylus. SUPPORT INFORMATION More information on the MC35 Visit the Symbol Web site at http://www.symbol.com/mc35 ACCESSORIES Install the Memory Card 1 Open the expansion slot cover. Setting up and using the MC35 MC35 User Guide Available at: http://www.symbol.com/mc35 PHONE SETUP 1 Install the SIM Card 1 Press the Power button to turn off the MC35. 2 Slide the battery latch to the unlock icon The battery pack ejects slightly. to remove the battery. 3 Remove the battery pack from the MC35. Product Video Tutorial BAR CODE READING Visit the Symbol Web site at http://www.symbol.com/mc35 Connecting and synchronizing with the host computer 2 Enter Your PIN 4 Turn Off the Phone Function 3 With rear panel facing you, slide the SIM card holder to the right. 4 Lift the holder halfway from the recess area. 5 Insert the SIM card into SIM card holder. After installing the SIM card activate your mobile service connection. In most cases, SIM cards are preset with a PIN (Personal Identity Number), provided by your service provider. NOTE : The proper position of the SIM card—the card connector (i.e., gold area) should be facing downward with the bevelled corner fitting the lower left corner of the recess area. 1 Press the Power button to turn on the MC35. 1 Launch the Wireless Manager application. On the Today screen, tap the Wireless Manager icon. or On the Today screen, tap the signal icon and select Wireless Manager. 2 Tap Start – Help within the specific program. 3 Travel Charger Hands-free Headset Protective Boot Stylus 3-pack Standard Life Battery Extended Life Battery 6 Press the SIM card holder down. 7 Slide the SIM card holder to the left to lock it into place. 2 3 To remove the SD/MMC card, push down on the card and release. The card ejects from the slot. Quick Start Guide http://www.symbol.com/mc35 SYMBOL TECHNOLOGIES, INC. One Symbol Plaza Holtsville, New York 11742-1300 Charging LED: Flashing orange: Battery charging On the Today screen, tap the Wireless Manager icon. or 7 72-93873-01 Rev A - December 2006 Notifications 3 Turn On the Phone Function 1 Launch the Wireless Manager application. 1 Vehicle Kit - Auto Mounting Kit - Auto Charger - Hands-free Headset Leather Case USB Charge/Sync Cable MC35 4 2 Slide the SD/MMC card into the slot and push in until it locks into place. Accessories © 2006 Symbol Technologies, Inc. 5 1 Information on using programs on the MC35 MC35 Regulatory Guide 2 On the Wireless Manager screen, tap Phone to turn off phone function. 3 Enter the PIN from your service provider. 4 Tap Enter. ActiveSync®Help on the host computer. To view help, start ActiveSync®, click Help - Microsoft ActiveSync Help. Service and Warranty 2 Tap Start > Phone. 8 Reinstall the battery pack. 6 On the Today screen, tap the signal icon Wireless Manager. Solid orange: Charging complete and select 2 On the Wireless Manager screen, tap Phone to turn on the phone function. The signal icon changes indicating the MC35 is searching for a mobile connection. This may take a few seconds. The signal icon changes to and to once a mobile connection is established. GSM Status/Notification LED: Fast flashing green: GSM activity Solid green: Voice call in progress Flashing red: System notification 1 Place the Camera/Bar Code switch to the Bar Code position. 2 Launch a bar code reading application on MC35. 3 Point the MC35 toward the bar code and align if necessary. 4 Press the Camera button to read the bar code data.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Copy, Extract, Print high-res XMP Toolkit : 3.1-702 About : uuid:c2a1e59b-95e6-42bc-85c9-60ab657dcafa Producer : Adobe PDF library 6.66 Creator Tool : Illustrator Create Date : 2007:01:04 16:44:46-04:00 Modify Date : 2007:03:16 08:51:10-04:00 Metadata Date : 2007:03:16 08:51:10-04:00 Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 156 Thumbnail Image : (Binary data 17637 bytes, use -b option to extract) Document ID : uuid:3F038284359CDB1192D7B91489317EE7 Instance ID : uuid:e03162a8-5995-4af4-b07e-12cf0a9d6e20 Derived From Instance ID : uuid:51ac5bf8-6568-482f-b771-960df1e3458c Derived From Document ID : uuid:5DDF2C6A5C8EDB1193FC8FC024DCFF3D Format : application/pdf Title : MC35 Quick Start Guide Creator : Symbol Technologies, Inc. Page Count : 2 Author : Symbol TechnologiesEXIF Metadata provided by EXIF.tools