Motorola Cp150Tm Users Manual CP150 CP200 User Guide

CP150TM to the manual 0054d8f8-f8aa-4505-b753-c7f0fea87d77

2015-01-23

: Motorola Motorola-Cp150Tm-Users-Manual-272027 motorola-cp150tm-users-manual-272027 motorola pdf

Open the PDF directly: View PDF .
Page Count: 44

Download
Open PDF In Browser	View PDF

309N60-A_cvr.qxd

8/19/2003

10:43 AM

Page 1

MOTOROLA, the Stylized M Logo, and Radius are registered in the US Patent & Trademark Office.
All other product or service names are the property of their respective owners.
© Motorola, Inc. 2002, 2003. All rights reserved. Printed in U.S.A.
MOTOROLA, le logotype au M stylisé et Radius sont enregistrés auprès du Bureau des marques et brevets des États-Unis.
Tous les autres noms de produits et de services sont la propriété de leurs titulaires respectifs.
© Motorola, Inc. 2002, 2003. Tous droits réservés. Imprimé aux États-Unis.

CP150™/CP200™
Commercial Series

*6880309N60*

Two-Way Radio User Guide

6880309N60-A

de la radio bidirectionnelle

Manuel de l'utilisateur

Non-displayTOC.fm Page 1 Monday, November 17, 2003 1:55 PM

CONTENTS

Improved Audio Features . . . . . . . . . . . . . 16
Companding . . . . . . . . . . . . . . . . . . . . 16
Getting Started . . . . . . . . . . . . . . . . . . . . 17

Safety and Warranty . . . . . . . . . . . . . . . . . 3

Battery Information . . . . . . . . . . . . . . . . . .
Charging Your Battery . . . . . . . . . . . . .
Wall Charger. . . . . . . . . . . . . . . . . . . . . . .
Desktop Chargers. . . . . . . . . . . . . . . . . . .
Rapid Charger . . . . . . . . . . . . . . . . . . .
Slow Charger. . . . . . . . . . . . . . . . . . . .
Accessory Information . . . . . . . . . . . . . . .
Attaching the Battery . . . . . . . . . . . . . .
Removing the Battery . . . . . . . . . . . . .
Attaching the Antenna . . . . . . . . . . . . .
Removing the Antenna . . . . . . . . . . . .
Attaching the Belt Clip . . . . . . . . . . . . .
Removing the Belt Clip . . . . . . . . . . . .
Turning the Radio On or Off . . . . . . . . . . .
Adjusting the Volume . . . . . . . . . . . . . . . .
Selecting a Radio Channel . . . . . . . . . . . .
Receiving . . . . . . . . . . . . . . . . . . . . . . . . .
Monitoring . . . . . . . . . . . . . . . . . . . . . . . . .
Transmitting . . . . . . . . . . . . . . . . . . . . . . .
VOX Operation . . . . . . . . . . . . . . . . . . . . .
Connecting a VOX Headset . . . . . . . .
Enabling or Disabling VOX . . . . . . . . .
Enable/Disable Headset Sidetone . . . . . .
VOX Headset. . . . . . . . . . . . . . . . . . . .
Non-VOX Headset with In-Line PTT . .

Product Safety and RF Exposure
Compliance . . . . . . . . . . . . . . . . . . . . . . . . 3
Battery Information . . . . . . . . . . . . . . . . . . . 3
Charging Batteries . . . . . . . . . . . . . . . . . 3
Limited Warranty . . . . . . . . . . . . . . . . . . . . . 4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . 9
Conventional Radio Systems . . . . . . . . . . . 9
CP150™/CP200™ Radio Features . . . . . . 9
Radio Wide Features . . . . . . . . . . . . . . . 9
Signaling Features . . . . . . . . . . . . . . . . . 9
Radio Overview . . . . . . . . . . . . . . . . . . . . 11
Parts of the Radio . . . . . . . . . . . . . . . . . . . 11
CP150/CP200 Models . . . . . . . . . . . . . 11
On/Off/Volume Knob . . . . . . . . . . . . . . 12
Channel Selector Knob . . . . . . . . . . . . 12
Push-to-Talk (PTT) Button . . . . . . . . . . 12
Microphone . . . . . . . . . . . . . . . . . . . . . 12
LED Indicator . . . . . . . . . . . . . . . . . . . . 12
Programmable Buttons . . . . . . . . . . . . 13
Indicator Tones . . . . . . . . . . . . . . . . . . . . . 15
Audio Indicators for Programmable
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 15

CONTENTS

Computer Software Copyrights . . . . . . . . . . 2

17
17
17
18
18
19
20
20
20
21
21
22
22
23
23
23
24
24
24
25
25
25
25
25
26
1

English

CONTENTS

Non-displayTOC.fm Page 2 Monday, November 17, 2003 1:55 PM

Repeater or Talkaround Mode . . . . . . . . . 26
Setting Tight or Normal Squelch. . . . . . . . 26
Setting the Power Level . . . . . . . . . . . . . . 27

COMPUTER SOFTWARE
COPYRIGHTS

Radio Calls . . . . . . . . . . . . . . . . . . . . . . . 29

The Motorola products described in this
manual may include copyrighted Motorola
computer programs stored in semiconductor
memories or other media. Laws in the United
States and other countries preserve for
Motorola certain exclusive rights for
copyrighted computer programs including, but
not limited to, the exclusive right to copy or
reproduce in any form the copyrighted
computer program. Accordingly, any
copyrighted Motorola computer programs
contained in the Motorola products described
in this manual may not be copied, reproduced,
modified, reverse-engineered, or distributed in
any manner without the express written
permission of Motorola. Furthermore, the
purchase of Motorola products shall not be
deemed to grant either directly or by
implication, estoppel, or otherwise, any license
under the copyrights, patents or patent
applications of Motorola, except for the normal
non-exclusive license to use that arises by
operation of law in the sale of a product.

Receiving a Selective Call . . . . . . . . . . . . 29
Receiving a Call Alert Page . . . . . . . . . . . 29
Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Talkback . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting System Scan . . . . . . . . . . . . . . . .
Stopping System Scan . . . . . . . . . . . . . . .
Starting Auto Scan . . . . . . . . . . . . . . . . . .
Stopping Auto Scan . . . . . . . . . . . . . . . . .
Deleting a Nuisance Channel . . . . . . . . . .
Restoring a Channel to the Scan List .
Prioritizing a Scan List Member . . . . . . . .

31
31
31
31
31
32
32
33

Accessories . . . . . . . . . . . . . . . . . . . . . . 35
Carry Accessories. . . . . . . . . . . . . . . . . . .
Chargers . . . . . . . . . . . . . . . . . . . . . . . . . .
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . .
Headsets . . . . . . . . . . . . . . . . . . . . . . . . .
Surveillance Accessories . . . . . . . . . . . . .
Remote Speaker Microphones . . . . . . . . .
Ear Microphone Systems . . . . . . . . . . . . .
Antennas . . . . . . . . . . . . . . . . . . . . . . . . .
Miscellaneous . . . . . . . . . . . . . . . . . . . . . .

English

35
35
35
36
36
37
37
38
38

00_SafetyNA.fm Page 3 Monday, November 17, 2003 1:55 PM

SAFETY AND WARRANTY
PRODUCT SAFETY AND RF
EXPOSURE COMPLIANCE

!
Caution

Before using this product, read
the operating instructions for safe
usage contained in the Product
Safety and RF Exposure booklet
enclosed with your radio.

This radio is restricted to occupational use
only to satisfy FCC RF energy exposure
requirements. Before using this product, read
the RF energy awareness information and
operating instructions in the Product Safety
and RF Exposure booklet enclosed with your
radio (Motorola Publication part number
68P81095C98) to ensure compliance with RF
energy exposure limits.
For a list of Motorola-approved antennas,
batteries, and other accessories, visit the
following web site which lists approved
accessories: http://www.motorola.com/cgiss/
index.shtml.

Charging Batteries
This product is powered by a nickel-cadmium
(NICd) or lithium-ion (Lilon) rechargeable
battery. Charge the battery before use to
ensure optimum capacity and performance.
The battery was designed specifically to be
used with a Motorola charger. Charging in nonMotorola equipment may lead to battery
damage and void the battery warranty.
SAFETY AND
WARRANTY

ATTENTION!

BATTERY INFORMATION

Note: When charging a battery attached to a
radio, turn the radio off to ensure a full
charge.
The battery should be at about 77°F (25°C)
(room temperature), whenever possible.
Charging a cold battery (below 50° F [10°C])
may result in leakage of electrolyte and
ultimately in failure of the battery. Charging a
hot battery (above 95°F [35°C]) results in
reduced discharge capacity, affecting the
performance of the radio. Motorola rapid-rate
battery chargers contain a temperaturesensing circuit to ensure that batteries are
charged within the temperature limits stated
above.

English

00_SafetyNA.fm Page 4 Monday, November 17, 2003 1:55 PM

LIMITED WARRANTY
MOTOROLA COMMUNICATION
PRODUCTS
I. WHAT THIS WARRANTY COVERS AND
FOR HOW LONG:

SAFETY AND
WARRANTY

MOTOROLA INC. (“MOTOROLA”) warrants the
MOTOROLA manufactured Communication
Products listed below (“Product”) against defects
in material and workmanship under normal use
and service for a period of time from the date of
purchase as scheduled below:
CP150/CP200 Portable Units
Product Accessories

Motorola, at its option, will at no charge either
repair the Product (with new or reconditioned
parts), replace it (with a new or reconditioned
Product), or refund the purchase price of the
Product during the warranty period provided it is
returned in accordance with the terms of this
warranty. Replaced parts or boards are
warranted for the balance of the original
applicable warranty period. All replaced parts of
Product shall become the property of
MOTOROLA.

English

Two (2) Years
One (1) Year

This express limited warranty is extended by
MOTOROLA to the original end user purchaser
only and is not assignable or transferable to any
other party. This is the complete warranty for the
Product manufactured by MOTOROLA.
MOTOROLA assumes no obligations or liability
for additions or modifications to this warranty
unless made in writing and signed by an officer
of MOTOROLA. Unless made in a separate
agreement between MOTOROLA and the
original end user purchaser, MOTOROLA does
not warrant the installation, maintenance or
service of the Product.
MOTOROLA cannot be responsible in any way
for any ancillary equipment not furnished by
MOTOROLA which is attached to or used in
connection with the Product, or for operation of
the Product with any ancillary equipment, and all
such equipment is expressly excluded from this
warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims
liability for range, coverage, or operation of the
system as a whole under this warranty.

00_SafetyNA.fm Page 5 Monday, November 17, 2003 1:55 PM

II. GENERAL PROVISIONS:

SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES OR
LIMITATION ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE
LIMITATION OR EXCLUSIONS MAY NOT
APPLY.
This warranty gives specific legal rights, and
there may be other rights which may vary from
state to state.

IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the
date of purchase and Product item serial number)
in order to receive warranty service and, also,
deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty
service location. Warranty service will be
provided by Motorola through one of its
authorized warranty service locations. If you first
contact the company which sold you the Product
(e.g., dealer or communication service provider),
it can facilitate your obtaining warranty service.
You can also call Motorola at 1-800-927-2744
US/Canada.

SAFETY AND
WARRANTY

This warranty sets forth the full extent of
MOTOROLA's responsibilities regarding the
Product. Repair, replacement or refund of the
purchase price, at MOTOROLA’s option, is the
exclusive remedy. THIS WARRANTY IS GIVEN
IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL
MOTOROLA BE LIABLE FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL
LOSS, LOST PROFITS OR SAVINGS OR
OTHER INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT
OF THE USE OR INABILITY TO USE SUCH
PRODUCT, TO THE FULL EXTENT SUCH MAY
BE DISCLAIMED BY LAW.

III. STATE LAW RIGHTS:

English

00_SafetyNA.fm Page 6 Monday, November 17, 2003 1:55 PM

SAFETY AND
WARRANTY

V. WHAT THIS WARRANTY DOES NOT
COVER:

English

A Product which, due to illegal or
unauthorized alteration of the software/
firmware in the Product, does not function in
accordance with MOTOROLA’s published
specifications or the FCC type acceptance
labeling in effect for the Product at the time
the Product was initially distributed from
MOTOROLA.

Defects or damage resulting from use of the
Product in other than its normal and
customary manner.

Defects or damage from misuse, accident,
water, or neglect.

Defects or damage from improper testing,
operation, maintenance, installation,
alteration, modification, or adjustment.

Scratches or other cosmetic damage to
Product surfaces that does not affect the
operation of the Product.

Breakage or damage to antennas unless
caused directly by defects in material
workmanship.

Normal and customary wear and tear.

VI. PATENT AND SOFTWARE PROVISIONS:

A Product subjected to unauthorized
Product modifications, disassemblies or
repairs (including, without limitation, the
addition to the Product of non-Motorola
supplied equipment) which adversely affect
performance of the Product or interfere with
Motorola's normal warranty inspection and
testing of the Product to verify any warranty
claim.

MOTOROLA will defend, at its own expense, any
suit brought against the end user purchaser to
the extent that it is based on a claim that the
Product or parts infringe a United States patent,
and MOTOROLA will pay those costs and
damages finally awarded against the end user
purchaser in any such suit which are attributable
to any such claim, but such defense and
payments are conditioned on the following:

Product which has had the serial number
removed or made illegible.

Freight costs to the repair depot.

that MOTOROLA will be notified promptly in
writing by such purchaser of any notice of
such claim;

00_SafetyNA.fm Page 7 Monday, November 17, 2003 1:55 PM

that MOTOROLA will have sole control of the
defense of such suit and all negotiations for
its settlement or compromise; and

should the Product or parts become, or in
MOTOROLA’s opinion be likely to become,
the subject of a claim of infringement of a
United States patent, that such purchaser
will permit MOTOROLA, at its option and
expense, either to procure for such
purchaser the right to continue using the
Product or parts or to replace or modify the
same so that it becomes non-infringing or to
grant such purchaser a credit for the Product
or parts as depreciated and accept its
return. The depreciation will be an equal
amount per year over the lifetime of the
Product or parts as established by
MOTOROLA.

MOTOROLA will have no liability with respect to
any claim of patent infringement which is based
upon the combination of the Product or parts
furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will
MOTOROLA have any liability for the use of
ancillary equipment or software not furnished by
MOTOROLA which is attached to or used in
connection with the Product. The foregoing
states the entire liability of MOTOROLA with

respect to infringement of patents by the Product
or any parts thereof.
Laws in the United States and other countries
preserve for MOTOROLA certain exclusive rights
for copyrighted MOTOROLA software such as
the exclusive rights to reproduce in copies and
distribute copies of such Motorola software.
MOTOROLA software may be used in only the
Product in which the software was originally
embodied and such software in such Product
may not be replaced, copied, distributed,
modified in any way, or used to produce any
derivative thereof. No other use including,
without limitation, alteration, modification,
reproduction, distribution, or reverse engineering
of such MOTOROLA software or exercise of
rights in such MOTOROLA software is permitted.
No license is granted by implication, estoppel or
otherwise under MOTOROLA patent rights or
copyrights.

SAFETY AND
WARRANTY

VII. GOVERNING LAW:
This Warranty is governed by the laws of the
State of Illinois, USA.

English

00_SafetyNA.fm Page 8 Monday, November 17, 2003 1:55 PM

SAFETY AND
WARRANTY

Notes:

English

01_Introduction.fm Page 9 Monday, November 17, 2003 3:49 PM

INTRODUCTION

•
•

Monitor and Sticky Monitor
System Scan with Single Priority Scan

Signaling Features

CONVENTIONAL RADIO SYSTEMS
Conventional radio systems typically refer to
unit-to-unit communications through a single
channel. Conventional systems also allow
radio users to extend communication coverage
by relaying their messages through a repeater.
To ensure coordinated use by multiple users,
each radio user must monitor the channel or
repeater before transmitting to verify that the
system is not currently busy.

•

- Selective Radio
Inhibit Decode
- Radio Check
Decode
•

CP150™/CP200™ RADIO
FEATURES
Radio Wide Features

•
•
•

4 or 16 Channels
2 Programmable Feature Buttons
Busy Channel Lockout
High/Low Power Settings (Available for 4W
& 5W models only)
Repeater/Talkaround
Voice Operated Transmit
Transmit Time-Out Timer

Quik-Call II Signaling (Available for 4W &
5W models only)
- Call Alert
Decode

•

- PTT ID Decode
- PTT ID Encode
- Selective Inhibit
Decode

- Selective Call
Decode

DTMF Signaling
INTRODUCTION

•
•
•
•

MDC 1200 Signaling (Available for 4W &
5W models only)

- DTMF PTT ID
Encode

English

01_Introduction.fm Page 10 Monday, November 17, 2003 1:56 PM

INTRODUCTION

Notes:

English

02_Overview.fm Page 11 Monday, November 17, 2003 1:56 PM

PARTS OF THE RADIO

RADIO OVERVIEW

CP150/CP200 Models

On/Off/Volume
Knob
Push-to-Talk
(PTT) Button

Channel Selector
Knob
LED Indicator

Side Button 1
(programmable)

Side Button 2
(programmable)

Microphone

Accessory Connector
with a Dust Cover

English

02_Overview.fm Page 12 Monday, November 17, 2003 1:56 PM

RADIO OVERVIEW

On/Off/Volume Knob
Turns the radio on or off, and adjusts the
radio’s volume.

Red

Transmitting

Channel Selector Knob

Flashing Red

Receiving

Switches the radio to different channels.

Scan

LED State/Color

Flashing Green

Indication

Scanning for activity

Push-to-Talk (PTT) Button

Call

Press and hold down this button to talk
(transmit); release it to listen.

Flashing Yellow

Microphone

Flashing Yellow

When sending a message, hold the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth, and speak clearly into it.

Sticky Monitor/Open Squelch

LED Indicator
Indicates power-up, transmit, receive, scan
status, Call Alert™, Selective Call, Monitor,
and battery status.

English

Basic Features

Alert†

Selective

Indicates receiving a Call Alert

Call†

Yellow

Indicates receiving a Selective
Call
While monitoring

Low Battery
Flashing Red
Low battery level
when transmitting
†Available for 4W and 5W models only.

02_Overview.fm Page 13 Monday, November 17, 2003 1:56 PM

Battery Charge Status

Battery
Level

LED
Indicator

Good

Green

Sufficient

Yellow

Low

Flashing Red

Very Low

None

Programmable Buttons
The two side buttons on your radio can be
programmed by your dealer as shortcuts to
various radio features.
Check with your dealer for a complete list of
functions your radio supports.

•

short press — quickly pressing and releasing the programmable buttons

•

long press — pressing and holding the
programmable buttons for a period of time
(default 1 1/2 seconds or programmed
value) before releasing

•

hold down — pressing and holding down
the programmable buttons while checking
status or making adjustments

RADIO OVERVIEW

You can check battery charge status if your
dealer has preprogrammed one of the
programmable buttons. Hold down the
preprogrammed Battery Indicator button. The
charge status is shown by the color of the
radio’s LED indicator.

Some buttons can access up to two features,
depending on the type of button press:

Depending on how your radio has been
programmed by your dealer, these functions
are activated EITHER through a short press
OR a long press, but NOT both.
A summary of programmable radio features
and corresponding page references appears
beginning on page 14.
In the “Feature” column, have your dealer write
down the programmable buttons next to the
features that have been programmed to them.

English

RADIO OVERVIEW

02_Overview.fm Page 14 Monday, November 17, 2003 1:56 PM

Feature
Battery
Indicator

Short Press/Long Press

—

Page

Checks the battery charge status.

Monitors the selected channel for
any activity.

Sticky Monitor/
Monitor

A long press of the Monitor button
initiates. A short press of the
Monitor button cancels.

Volume Set

Sounds a tone for adjusting the radio’s volume level.

Voice Operated
Transmission
(VOX)

Toggle VOX on and off.

—

Power Level†

Toggles your radio’s transmit power
level between High and Low power.

—

Repeater/
Talkaround

Toggles between using a repeater
and transmitting directly to another
radio.

—

Squelch

Toggles your radio’s squelch level
between tight and normal squelch.

—

†Available for 4W and 5W models only.

English

Hold Down

Button

02_Overview.fm Page 15 Monday, November 17, 2003 1:56 PM

Short Press/Long Press

Hold Down

Page

Scan

Starts or stops the Scan operation.

—

Nuisance
Channel Delete

Deletes a nuisance channel while
scanning.

—

INDICATOR TONES
High pitched tone

Low pitched tone

Button

AUDIO INDICATORS FOR
PROGRAMMABLE BUTTONS

RADIO OVERVIEW

Feature

Some programmable buttons use tones to
indicate one of two modes:
Self Test Pass Tone
Button
Self Test Fail Tone

Negative
Indicator Tone

Scan

Start scan

Stop scan

Power Level†

High power
selected

Low power
selected

Squelch

Tight squelch

Normal squelch

Repeater/
Talkaround

Does not use
repeater

Uses repeater

VOX

VOX enabled

VOX disabled

Positive Indicator Tone

Negative Indicator Tone

Positive
Indicator Tone

†Available for 4W and 5W models only.

English

RADIO OVERVIEW

02_Overview.fm Page 16 Monday, November 17, 2003 1:56 PM

IMPROVED AUDIO FEATURES
Companding
Companding is a feature that allows further
improvement of voice quality. It compresses
your voice at transmission, and expands it
when receiving while simultaneously reducing
extraneous noise. However, to enjoy this
benefit, all transmitting and receiving radios
must have this feature activated.

English

03_GetStarted.fm Page 17 Monday, November 17, 2003 1:56 PM

GETTING STARTED

To Charge the Battery
1

Turn the radio off.

Lift the dust cover to expose the audio
accessory connector.

Insert the charging adapter into the
accessory connector.

Plug the charging adapter into an electrical
outlet.

BATTERY INFORMATION
Charging Your Battery

•

Note: Batteries are shipped uncharged from
the factory. Always charge a new
battery 14 to 16 hours before initial
use, regardless of the status indicated
by the charger.
Note: Do not use the wall charger and
desktop charger at the same time
when charging.

WALL CHARGER
Note: Do not use the wall charger if using
lithium-ion (Li-Ion) or nickel-metal hyride
(NiMH) batteries. The wall charger is for
nickel-cadmium (NiCd) batteries only.

The LED on the charging adapter lights
Red while the charger is plugged into an
electrical outlet.

Note:

Do not leave the charger connected
to the radio when it is not connected
to the electrical outlet.

GETTING STARTED

If a battery is new, or its charge level is very
low, you will need to charge it before you can
use it. When the battery level is low and the
radio is in transmit mode you will see the LED
indicator flash red. Upon release of the PTT
button, you will hear an alert tone.

Unplug the charger from the electrical outlet
and radio after 10 hours.
Note:

After the initial charge of 14 to 16
hours, do not charge the battery
more than 10 hours.

English

03_GetStarted.fm Page 18 Monday, November 17, 2003 1:56 PM

DESKTOP CHARGERS

LED color

Rapid Charger
1

Turn the radio off.

Place the battery, with or without the radio, in
the charger pocket.

GETTING STARTED

•

LED color

Status

No LED Indication

Battery inserted incorrectly
or battery not detected.

Single Green Flash

Successful charger
power-up.

Flashing Red*

Battery unchargeable or not
making proper contact.

Steady Red

Battery is in Rapid charge
mode.

Flashing Yellow

Battery in charger but waiting to be charged. The battery temperature may be too
hot or too cold. The voltage
may be lower than the predetermined threshold level
for charging.

English

The charger LED indicates the charging
progress.

Status

Flashing Green†

Battery 90% (or more)
charged. Trickle charging.

Green

Battery fully charged.

* Remove the battery from the charger and
use a pencil eraser to clean the three metal
contacts at the back of the battery. Place the
battery back into the charger. If the LED
indicator continues to flash red, replace the
battery.
† A standard battery may require 90 minutes to
charge to 90% capacity. Even though new
batteries might prematurely indicate a full
charge (steady green LED), charge the
battery for 14 to 16 hours prior to initial use
for best performance.

A list of Motorola authorized batteries and
battery chargers appears on page 35. The
listed chargers will charge only Motorola
authorized batteries. Other batteries may not
charge.

03_GetStarted.fm Page 19 Monday, November 17, 2003 1:56 PM

Slow Charger
1

Turn the radio off.

Place the battery, with or without the radio, in
the charger pocket.
•

The charger LED indicates the charging
progress.
Status

No LED Indication

Battery inserted incorrectly
or battery not detected.

Steady Red

Battery is in over night
charge mode. The battery is
fully charged after 11 hours.

GETTING STARTED

LED color

English

03_GetStarted.fm Page 20 Monday, November 17, 2003 1:56 PM

ACCESSORY INFORMATION

Removing the Battery

GETTING STARTED

Attaching the Battery

Battery Latch

Align the battery to the battery rails on the
back of the radio (approximately 1/2 in. from
the top of the radio.)

Press the battery firmly to the radio and slide the
battery upward until the latch snaps into place.

Slide the battery latch, located on radio bottom,
into the lock position.

English

Turn off the radio if it is turned on (see page 23).

Slide the battery latch into the unlock position.
Disengage by pushing downward and holding
the latch towards the front of the radio.

With the battery latch disengaged, slide the
battery down from the top of the radio about
1/2 in. Once the battery is free from the
battery rails, lift it directly away from the radio.

03_GetStarted.fm Page 21 Monday, November 17, 2003 1:56 PM

Attaching the Antenna

Removing the Antenna

GETTING STARTED

Turn the antenna clockwise to attach it.

Turn the antenna counter-clockwise to remove
it.

English

03_GetStarted.fm Page 22 Monday, November 17, 2003 1:56 PM

Attaching the Belt Clip

Removing the Belt Clip

GETTING STARTED

Belt Clip Tab

Align the grooves of the belt clip with those of
the battery.

Use a key to press the belt clip tab away from
the battery to unlock the belt clip.

Press the belt clip downward until you hear a
click.

Slide the belt clip upward to remove it.

English

03_GetStarted.fm Page 23 Monday, November 17, 2003 1:56 PM

TURNING THE RADIO ON OR OFF

Turn the On/Off/
Volume Control knob
counter-clockwise until
you hear a click.

Hold down the Volume Set button (see page
14); you will hear a continuous tone.

Turn the On/Off/Volume Control knob to the
desired volume level.

Release the Volume Set button.

SELECTING A RADIO CHANNEL
Your radio offers 4 or 16 channels.
Note: Due to government regulations, some
channels may not be programmed. Ask
your dealer for more information.
To select a channel, turn the Channel
Selector knob clockwise or counterclockwise
until you reach the desired channel.

GETTING STARTED

Turn the On/Off/
Volume Control
knob clockwise. If
power-up is
successful, you will
hear the Self-Test
Pass Tone
(
) and
see the LED flash
green.

OFF

ADJUSTING THE VOLUME

If the radio fails to
power up, you will
hear the Self Test
Fail Tone
(
).

English

03_GetStarted.fm Page 24 Monday, November 17, 2003 1:56 PM

RECEIVING
1

Turn your radio on.

Adjust the radio’s volume (see page 23).

Switch to the desired channel. To respond,
hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.

A short press of the Monitor button cancels
Sticky Monitor mode and returns the radio to
normal operation.

GETTING STARTED

TRANSMITTING
1

Turn your radio on.

Use the Channel Selector knob to select the
desired channel.

MONITORING

It is important to monitor traffic before
transmitting to ensure that you do not “talk
over” someone who is already transmitting.

Hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.

Release the PTT to listen.

Press and hold the preprogrammed
Monitor button to access channel traffic.

Once channel traffice has cleared, proceed
with your call by pressing the PTT button.

A long press of the preprogrammed Monitor
button places the radio in Sticky Monitor
mode.
•

English

You hear a high-pitched tone.

03_GetStarted.fm Page 25 Monday, November 17, 2003 1:56 PM

VOX OPERATION
When hands-free operation is desired, your
radio can be activated by voice alone using the
VOX feature when you speak through an
accessory that is connected to your radio.

You can select channels to enable or disable
VOX as preprogrammed by your dealer.
1

Note:

Connecting a VOX Headset
Turn off your radio.

Connect the VOX accessory to your radio and
turn the radio on.

Enabling or Disabling VOX
To enable or disable VOX operation, press the
preprogrammed VOX button (see page 14).

Pressing the PTT button disables
VOX.

Select a channel that has not been
preprogrammed by your dealer to disable
VOX.

ENABLE/DISABLE HEADSET
SIDETONE

Note: Pressing the PTT button disables VOX.

Your dealer can program your radio so you can
hear your voice through a headset while you
speak.

– or –

VOX Headset
1

Turn off your radio.

Connect the VOX accessory to your radio.

Turn the radio on. During transmit, you will
hear your voice through the headset while
you speak.

GETTING STARTED

Select a channel that has been
preprogrammed by your dealer to enable
VOX.

English

03_GetStarted.fm Page 26 Monday, November 17, 2003 1:56 PM

To disable the headset sidetone, turn off your
radio and turn the radio on again.

GETTING STARTED

Non-VOX Headset with In-Line PTT
1

Turn off your radio.

Connect the non-VOX accessory to your
radio.

Press and hold the In-line PTT on your
headset.

Turn the radio on and release the PTT once
the radio has completed start-up. During
transmit, you will hear your voice through the
headset while you speak.

To disable the headset sidetone, turn off your
radio and turn the radio on again.

REPEATER OR TALKAROUND
MODE
Talkaround Mode enables you to communicate
with another radio when either:
•

the repeater is not operating
– or –

•

your radio is out of the repeater’s range but
within communicating distance of another
radio.

Press the preprogrammed Repeater/
Talkaround button (see page 14) to toggle
between Repeater mode and Talkaround Mode.

SETTING TIGHT OR NORMAL
SQUELCH
Use this feature to filter out nuisance (unwanted)
calls and/or background noise. However,
tightening squelch could cause calls from remote
locations to be filtered out as well. In this case,
normal squelch may be more desirable.
Press the preprogrammed Squelch button
(see page 14) to toggle between tight and
normal squelch.

English

03_GetStarted.fm Page 27 Monday, November 17, 2003 1:56 PM

SETTING THE POWER LEVEL
(Available for 4W and 5W models only)
Each channel in your radio has a predefined
transmit power level that can be changed.
•

High power allows you to reach a radio that
is farther away.

•

Low power conserves the battery’s charge.
GETTING STARTED

Press the preprogrammed Power Level button
(see page 14) to toggle between low and high
power.

English

03_GetStarted.fm Page 28 Monday, November 17, 2003 1:56 PM

GETTING STARTED

Notes:

English

04_RadioCall.fm Page 29 Monday, November 17, 2003 1:57 PM

RADIO CALLS
RECEIVING A SELECTIVE CALL
(Available for 4W and 5W models only)
When you receive a Selective Call:
•

The LED indicator flashes yellow, if programmed by your dealer.

•

You hear two high pitched tones.
1

To acknowledge the call, press and release
the PTT button.

Press and hold the PTT button to talk;
release to listen.

RECEIVING A CALL ALERT PAGE
(Available for 4W and 5W models only)
When you receive a Call Alert page:
The LED indicator flashes yellow, if programmed by your dealer.

•

You hear four high pitched tones.

RADIO CALLS

•

To acknowledge the page, press and release
the PTT button; to cancel the page, press any
other key.
29

English

04_RadioCall.fm Page 30 Monday, November 17, 2003 1:57 PM

RADIO CALLS

Notes:

English

05_Scan.fm Page 31 Monday, November 17, 2003 1:57 PM

SCAN
Your radio is equipped with the Scan feature,
which allows you to monitor multiple channels
for voice activity. The radio will stop on a
channel when it detects activity on it.

STARTING SYSTEM SCAN

Your radio automatically switches to a channel
within the scan list when it detects activity.

Press the preprogrammed Scan button (see
page 14).

The LED indicator blinks green during a scan
operation and stops blinking when the radio
switches to a channel.

STOPPING SYSTEM SCAN

There are two types of Scan available in your
radio:

STARTING AUTO SCAN

• System Scan

Auto Scan automatically starts scanning once
a channel with Auto Scan enabled is selected.

• Auto Scan

TALKBACK
The Talkback feature allows you to respond to
a transmission while scanning. If a
transmission is detected on a channel while
scanning, the radio will stop on that channel for
a default period of time after activity has
ceased. This is referred to as “hangtime”.
During this hangtime you may respond by
pressing the PTT button.

SCAN

Note: The LED scan indicator stops blinking
while the radio is in hangtime. If the
PTT button is not pressed during the
preprogrammed hangtime, the radio
returns to scanning channels.

Press the preprogrammed Scan button.

Select the channel that your dealer has
preprogrammed for Auto Scan.

STOPPING AUTO SCAN
Select a channel that has not been
preprogrammed for Auto Scan.

English

05_Scan.fm Page 32 Monday, November 17, 2003 1:57 PM

SCAN

DELETING A NUISANCE CHANNEL
Note: Your dealer must preprogram a button
to Nuisance Delete (see page 14) to
access this feature.
If a channel continually generates unwanted
calls or noise (a “nuisance” channel), you can
temporarily remove it from the scan list:
1

While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance
Channel Delete button until you hear a tone.
Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note:

English

You cannot temporarily delete the
channel that has been preprogrammed as your designated scan
channel, a priority channel, or the
last remaining channel in the scan
list.

Restoring a Channel to the Scan List
1

Power off the radio. Once the radio is powered
on again, the deleted nuisance channels are
restored to the scan list.

– or –
1

Press the preprogrammed Scan button to stop
the scan.

Press the preprogrammed Scan button again
to start scanning again. The Deleted Nuisance
Channels are restored to the scan list.

– or –
1

Select a different channel. Once you return to
the original channel, the deleted nuisance
channels are restored to the scan list.

05_Scan.fm Page 33 Monday, November 17, 2003 1:57 PM

PRIORITIZING A SCAN LIST
MEMBER

Priority Channel

SCAN

You may want your radio to scan a specific
channel more frequently for calls. Your dealer
can prioritize scan list members for you. Check
with your dealer for details.
Scanning Sequence

None specified

Ch1➠Ch2➠Ch3➠
Ch4➠...Ch1

Channel 2

Ch2➠Ch1➠Ch2➠Ch3➠
Ch2➠Ch4➠Ch2➠...Ch1

Even though your radio has switched to a nonpriority channel, it will still check for activity on
the priority channel. If activity is detected, the
radio will switch to the priority channel.

English

05_Scan.fm Page 34 Monday, November 17, 2003 1:57 PM

SCAN

Notes:

English

06_Accessory.fm Page 35 Monday, December 1, 2003 3:21 PM

ACCESSORIES
Motorola offers a number of accessories to
enhance the productivity of your two-way radio.
Many of the available accessories are listed
below.

CARRY ACCESSORIES

CHARGERS
WPLN4138_R

Rapid Desktop Charger w/US NA
120 V Plug

EPNN7997

10 Hr. US NA 120 V Plug (plugs
directly into radio accessory
connector, used ONLY with battery
NNTN4496)

WPLN4155_R

10 Hr. Desktop Charger w/US NA
120 V Plug (used ONLY with battery
NNTN4496)

Nylon Case with Belt Loop

RLN5383

Leather Case with Belt Loop

EPNN7994

Rapid US NA 120 V Plug

RLN5384

Leather Case with 2-1/2 inch Swivel

WPLN4161_R

RLN5385

Leather Case with 3 inch Swivel

Rapid Six (6) Pocket Multi-Unit
Charger w/US NA 120 V Plug

HLN8255

3 inch Spring Action Belt Clip

RLN5644

2 inch Spring Action Belt Clip

HLN6602

Universal Chest Pack

1505596Z02

Replacement Strap for HLN6602
Universal Chest Pack

RLN4815

ACCESSORIES

HLN9701

BATTERIES
NNTN4496_R

NiCd, 1100 mAH

NNTN4497_R

Li-lon, 1800 mAH

Universal RadioPak

NNTN4851

NiMH, 1400 mAH

4280384F89

Replacement Belt Lengthener for
RLN4815 Universal RadioPak

NNTN4970

Slim Li-Ion, 1600 mAH

NTN5243

Shoulder Strap for Hard Leather
Cases (attaches to D-Shaped Rings
on case)

HLN9985

Waterproof Bag

English

06_Accessory.fm Page 36 Monday, December 1, 2003 3:21 PM

ACCESSORIES

HEADSETS

Adapter Cable (for use with headset
RMN5015)

RLN5411

Ultra-Lite Breeze Behind the Head
Headset

RKN4094

In-Line PTT Adapter (for use with
headset RMN4051)

PMMN4001

Ultra-Lite Earset with Mic and PTT

REX4648

Replacement Foam Ear Pad and
Windscreen Kit (for use with
headsets RMN9013 & RMN4016)

7580376E34

Replacement Ear Seals (for use with
headsets HMN9021 & HMN9022)

5080371E66

Replacement Ear Pad (for use with
headset BDN6647)

3580371E59

Replacement Wind Screen (for use
with headset BDN6647)

HMN9013

Lightweight Headset w/o In-line PTT

RMN4016

Lightweight Headset with In-line PTT

RLN5238

Lightweight Headset with In-line PTT,
NFL Style

HMN9021

Medium Weight Over the Head Dual
Muff Headset

HMN9022

Medium Weight Behind the Head
Dual Muff Headset

BDN6647

Medium Weight Single Speaker
Headset

BDN6648

Heavy Duty Dual Muff Headset with
Noise Canceling Microphone

RMN5015

Heavy Duty Dual Muff Racing
Headset (requires RKN4090
Headset Adapter Cable)

RMN4051

2-Way Hard Hat Mount, Black, Noise
Reduction Rating (22 dB) (requires
RKN4094)

RMN4054

Receive-Only Hard Hat Mount
Headset w/3.5mm Right Angle Plug

RMN4055

Receive-Only Headband Style
Headset w/3.5mm Right Angle Plug

English

RKN4090

SURVEILLANCE ACCESSORIES
HMN9752

Earpiece with Volume Control,
1-Wire (plastic earloop) (Beige)

HMN9727

Earpiece without Volume Control,
1-Wire (plastic earloop) (Beige)

RLN4894

Earpiece without Volume Control,
1-Wire (plastic earloop) (Black)

HMN9754

Earpiece with Microphone & PTT
Combined, 2-Wire (Beige)

RLN4895

Earpiece with Microphone & PTT
Combined, 2-Wire (Black)

06_Accessory.fm Page 37 Monday, December 1, 2003 3:21 PM

Earpiece with Microphone & PTT
Combined, 2-Wire w/Low Noise Kit
NTN8371 (Beige)

RLN4765

Large Custom Clear Earpiece,
Left Ear (for use with low noise kit
NTN8371)

BDN6720

Flexible Ear Receiver without Volume
Control (RX only)

5080384F72

Replacement Noise Attenuating Plug
for NTN8370

HMN9036

Earbud with Microphone & PTT
Combined, 2-Wire (Black)

5080371E73

Replacement Ear Tip (for use with
low noise kit NTN8371) (Beige)

HLN9132

Earbud Single Wire Receive Only
(Black)

5080371E75

Replacement Ear Tip (for use with
low noise kit NTN8371) (Black)

NTN8370

Extreme Noise Kit

7580372E11

NTN8371

Low Noise Kit

Replacement Ear Cushion (for use
with earpiece BDN6720)

RLN4760

Small Custom Clear Earpiece,
Right Ear (for use with low noise kit
NTN8371)

RLN4763

Small Custom Clear Earpiece,
Left Ear (for use with low noise kit
NTN8371)

RLN4761

Medium Custom Clear Earpiece,
Right Ear (for use with low noise kit
NTN8371)

RLN4764

Medium Custom Clear Earpiece,
Left Ear (for use with low noise kit
NTN8371)

RLN4762

Large Custom Clear Earpiece,
Right Ear (for use with low noise kit
NTN8371)

REMOTE SPEAKER MICROPHONES
HMN9030

Remote Speaker Microphone with
Coil Cord and Clip Back

HKN9094

Replacement Cord (for use with
remote speaker microphone
HMN9030)

ACCESSORIES

RLN5198

EAR MICROPHONE SYSTEMS
BDN6646

Standard Ear Mic with PTT Only
Interface

BDN6706

Standard Ear Mic with PTT and VOX
Interface

English

ACCESSORIES

06_Accessory.fm Page 38 Monday, December 1, 2003 3:21 PM

0180358B38

Ring Push-to-Talk Switch (for use
with ear microphone systems
BDN6646 & BDN6706)

0180300E83

Body Switch Push-to-Talk (for use
with ear microphone systems
BDN6646 & BDN6706)

0180300E25

Ear Guard with Adjustable Loop

0180358B32

Ear Holder, Black, Small

0180358B33

Ear Holder, Black, Medium

0180358B34

Ear Holder, Black, Large

0180358B35

Ear Holder, Clear, Small

0180358B36

Ear Holder, Clear, Medium

0180358B37

Ear Holder, Clear, Large

ANTENNAS
NAD6502_R

VHF Heliflex Antenna 14cm,
146-174 MHz

HAD9742

VHF Stubby Antenna, 9cm,
146-162 MHz

HAD9743

VHF Stubby Antenna, 9cm,
162-174 MHz

NAE6522_R

UHF Heliflex Stubby Antenna 9cm,
438-470 MHz

8505816K26

UHF Heliflex Stubby Antenna 7.1cm,
470-520 MHz

NAE6483_R

Flexible Whip Antenna, 403-520 MHz

English

MISCELLANEOUS
RLN5500

Accessory Retainer Kit (for use with
any audio accessory that needs to be
secured to the radio due to
demanding customer environments)

TDN9327

Portable Radio Hanger for door
panels up to 2.75 inch (slides over
and hangs from the door panel in
vehicle, radio belt clip required)

TDN9373

Portable Radio Hanger for door
panels up to 2.75 to 3.25 inch (slides
over and hangs from the door panel
in vehicle, radio belt clip required)

QR-Card.fm Page 39 Monday, November 17, 2003 1:58 PM

LED Indicators
LED State/Color

Indication

Red
Flashing Red

Transmitting
Receiving

Scan
Flashing Green

Scanning for activity

Low Battery
Flashing Red while
transmitting

Low battery level

Call Alert†
Flashing Yellow

Indicates receiving a Call Alert

Selective Call†
Flashing Yellow

Indicates receiving a Selective
Call

Sticky Monitor/
Monitor
Yellow

While monitoring.

Battery Charge
Status
Green
Yellow
Flashing Red
None

CP150™/CP200™ Quick Reference Card
On/Off/Volume Knob
Channel Selector Knob

Good
Sufficient
Low
Very Low

PTT
1

LED
Indicator

SP:
LP:

Microphone
2

SP:
LP:

†Available for 4W and 5W models only.
NOTE: Enter the functions for your radio’s two
programmable buttons in the boxes provided above.
SP represents Short Press, while LP represents
Long Press.

QR-Card.fm Page 40 Monday, November 17, 2003 1:58 PM

Turning On the Radio
• Turn On/Off/Volume Control knob clockwise. If the
radio successfully powers up, you will hear the Self
Test Pass tone and see the LED light green. If the
radio fails to power up, you will hear the Self Test
Fail tone.

Audio Indicators for Programmable Buttons
Programmable
Buttons

Adjusting the Radio Volume
1. Press and hold Volume Set button (preprogrammed
by your dealer) until you hear a continuous tone.
2. Turn On/Off/Volume Control knob to adjust volume
level.
3. Release Volume Set button at desired volume level.

Selecting a Radio Channel
• Turn Channel Selector knob clockwise or counterclockwise to reach desired channel.

Receiving
1. Turn on the radio.
2. Adjust the volume level.
3. Select the radio channel.

Transmitting
1. With radio on, turn Channel Selector knob to
required channel.
2. Press PTT and speak clearly with mouth about 2.5
to 5 cm (1 to 2 inches) away from microphone.
3. Release PTT when call is completed.

Negative
Indicator
Tone

Scan

Start Scan
operation

Stop Scan
operation

Power Level†

Radio transmits
at high power

Radio transmits
at low power

Squelch

Radio operates
in tight squelch

Radio operates
in normal
squelch

Repeater/
Talkaround

Radio DOES
NOT use the
repeater

Radio uses the
repeater

VOX

VOX enabled

VOX disabled

Turning Off the Radio
• Turn On/Off/Volume Control knob counterclockwise until you hear a click.

Positive
Indicator
Tone

†Available for 4W and 5W models only.

Starting or Stopping Scan
1. Press the preprogrammed Scan button to start scan.
The LED indictor blinks green during scan operation.
Or, select a channel that has been preprogrammed
for Auto Scan to start scan.
2. Press the Scan button again to stop scan. Or, select
a channel that has not been preprogrammed for
Auto Scan to stop scan.

Deleting a Nuisance Channel
1. With radio on a Nuisance Channel, press and hold
the preprogrammed Nuisance Delete button until
you hear a tone.
2. Release the Nuisance Delete button.

309N60-A_cvr.qxd

8/19/2003

10:43 AM

Page 1

CP150™/CP200™
Commercial Series

*6880309N60*

Two-Way Radio User Guide

6880309N60-A

de la radio bidirectionnelle

Manuel de l'utilisateur

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 44
Page Mode                       : UseOutlines
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:684c73cc-b5d7-4101-9daa-4f77ed1c677a
Producer                        : Acrobat Distiller 5.0 (Windows)
Create Date                     : 2003:08:19 15:43:04Z
Modify Date                     : 2007:05:21 14:56:17-05:00
Metadata Date                   : 2007:05:21 14:56:17-05:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : uuid:c4b47b7f-7d51-439a-9e75-c469a65a2898
Format                          : application/pdf
Creator                         : ckc015
Title                           : CP150-CP200 User Guide
Author                          : ckc015

EXIF Metadata provided by EXIF.tools

Motorola Cp150Tm Users Manual CP150 CP200 User Guide

CP150TM to the manual 0054d8f8-f8aa-4505-b753-c7f0fea87d77

Navigation menu

Versions of this User Manual:

Views

Navigation