Motorola Ht600 Users Manual Moto_portable
HT600 ht600-parts-catalog
HT600 to the manual 4e95b3ee-1b69-4cf5-9f7e-1e0b2c4852c6
2015-01-23
: Motorola Motorola-Ht600-Users-Manual-272281 motorola-ht600-users-manual-272281 motorola pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
HT600 Series Parts List 110 8/03 Replacement parts may no longer be available HT600 Series Parts List REF. NO. PART NO. 1 0105956M63 2 0105955N18 3 5 6 1505527P01 3305543P01 0105951N41 7 8 9 ---------- 10 11 12 See Note 0102706J99 0105951N79 13 14 4205123Q02 0105950N92 15 16 See Note 1305676R01 or 1305676R02 17 18 19 20 21 22 23 24 25 26 27 28 0405218Q01 0205163Q01 0405162Q01 0205765L02 0405216L04 0300136785 0484345A06 0205629L02 0405162Q02 3205141Q02 See Note 29 30 31 32 33 See Note 4805729G24 3205131S01 ---3205082E01 DESCRIPTION Assembly, Frame; includes: *Item 1 Frame *Item 40 Assembly, Housing; includes: *Item 2 Housing *Items 56, 58, 59, and 60 Cover, Front Nameplate, Front Assembly, Top Control Panel; includes: *Item 6 Panel *Items 17, 28, 29, and 32 Carrier, Flex Top Shield, Bottom Assembly, Controller Flex; includes: *Item 9 Controller Flex *Items 10, 80, 84, 89, and 90 (The Controller Flex Assembly also includes electrical parts. See Note) *Shield, Center; part of item 9 Cover, Dust Assembly, Knob; includes: *Item 12 Knob *Item 13 Clip, Push; part of item 12 Assembly, Knob; includes: *Item 14 Knob *Item 15 *Clip, Push; part of item 14 Escutcheon (2-Freq. Radios) Escutcheon (6-Freq. Radios) *Pin, Contact (P7); (not field replaceable, order top control panel assembly 0105951N41) Washer Nut, Spanner Washer, Flat Nut, Spanner Washer, Flat Screw, Phillips Hd., 4-40 x 3⁄16˝ Washer, Seal Nut, Hex; 2 req’d Washer, Flat; 2 req’d Gasket, “O” Ring *Bushing, Antenna; part of item 6 *Lug, Antenna; part of item 6 LED, Bicolor (CR413A/CR413B) Seal, LED Stud, Insert; part of item 6 Gasket, “O” Ring REF. NO. PART NO. 34 35 36 37 0300132342 4005148Q05 3205141Q03 1805100Q04 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 4005101Q01 0300140369 See Note 4605945K05 3905127Q01 3205082E24 0705830C02 3905421C13 2905124Q01 0400002625 4105944K01 5505536P01 0300139444 3205082E03 6505214E05 0400009761 0305941K01 6405531P02 3805236Q01 4505535P01 4205534P01 6405186Q01 60 3805187Q01 61 64 0305137Q04 See Note 65 See Note 66 See Note 67 0105951N40 68 70 74 75 76 77B 77C 78 ------2605775R02 0300136783 ------2605578P02 See Note 79 80 81 82 83 0300138620 See Note 1405753R01 2605711R03 ---- DESCRIPTION Screw, Phillips; 2-56 x 1⁄4˝ Switch, Frequency (S2) Gasket, “O” Ring Switch/Pot, On-Off/Volume (S1/R140) Switch, PL (S3) Screw, Flat Hd.; 2-56 x 1⁄8˝ *Insert, Frame; part of item 1 Contact Stud, Battery Contact, B+ Gasket, “O” Ring Support, Contact Contact, Battery Lug Lockwasher, Split #2 Spring, Battery Latch Latch Screw, Phillips Hd.; 2-56 x 5⁄32˝ Gasket, “O” Ring Fuse (F1) Lockwasher, Split #4 Screw Plate, Base *Actuator, PTT part of item 2 Lever, PTT *Retainer, PTT part of item 2 *Plate, Actuator Button; part of item 2 *Button, Actuator; part of item 2 Screw, Phillips; 4-40 x 1⁄2˝ *Seal, Dome (PTT); part of item 67 *Seal, Dome, (Mon); part of item 67 *Contact, Snap Dome; part of item 67 Assembly, B+ PTT Flex; includes: *Item 67 Flex *Items 64, 65, and 66 Housing, VCO Screw, Flat – not available Shield, Main Back Screw, Phillips Hd.; 2-56 x 5⁄16˝ Not used Not used Heatsink (Low Power Models) *Tubing, Heat Shrink; part of item 98 Screw, Phillips; 2-56 x 5⁄16˝ *Header, part of item 9 Insulator, Front Shield Shield Front Insulator, Flex REF. NO. PART NO. 84A 84B 85A 85B 86 See Note See Note See Note See Note ---- 88 0105956M68 89A 89B 90 91 92 93 94 See Note See Note See Note 3205141Q01 4205140Q01 1405135P01 See Note 95 96 97 5005155Q03 4205139Q01 See Note 98 0105956M62 99 101 ---0300138620 102 103 105 106 107 108 109 110 111 112 113 114 115 117 118 120 121 122 3505143Q04 See Note ---See Note 3905509R02 0405534R01 5402446J01 ---1405496R01 3905130N01 2605573S01 1405299Q01 0300136771 7505501R02 2605762R01 0305103S01 7505501R03 2605123S01 DESCRIPTION *Jack (J2), part of item 9 *Jack (J1), part of item 9 *Jack (P2), part of item 86 *Jack (P1), part of item 88 Assembly, Volume Pot Flex; includes: *Item 86 Volume Pot Flex *Items 85A and 106 Assembly, Frequency Switch Flex; includes: *Item 88 Frequency Switch Flex *Item 85B *Jack (J3), part of item 9 *Jack (J4), part of item 9 *Jack (J5), part of item 9 Gasket, “O” Ring Clamp, Speaker Insulator, Microphone *Flex, Microphone; part of item 98 Speaker (LS1) Retainer, Microphone *Boot, Microphone; part of item 98 Assembly, Microphone; includes: *Item 98 Microphone *Items 78, 94, 97, 98, and 103 Pad, Microphone Boot Screw, Flat Phillips Hd.; 2-56 x 7⁄16˝ Felt, Speaker *Plug (P5), part of item 98 Not used *Sockets (J7), part of item 86 Contact, 3 req’d Washer, Flat Label, Instruction Shield, I-F Insulator, I-F Shield Contact Strip Shield Insulator, Speaker Screw, Phillips; 2-56 x 3⁄16˝ Pad, Speaker Shield, Controller Flex Screw, Captive Pad, Front Cover Shield, Back *111NOTE: Not field replaceable, order parent Assembly. Cancelled Product HT600: Aftermarket support criteria has been met for spare parts. Items may no longer be available. https://www.motorola.com/businessonline 111 8/03 HT600 Series Portable Accessories Chargers Chargers Rapid/Regular Rate Desktop Chargers Multi-Unit Chargers A variety of chargers are available to fit the charging capabilities of your batteries. Choose rapid or regular rate, single unit chargers. The rapid chargers are equipped with red and green lights to indicate rapid charging or charge complete. All desktop units will accept any of the three battery sizes, with or without radio attached. NTN4668C Multi-Unit Desktop, Rapid Rate, 117V AC, 50-60 Hz NTN4668C NTN4636A Desktop, Regular Charge Rate, 220V, 50-60 Hz, (supplied with 2 prong plug) NLN7967A Wall Mount for 6 Unit Charger NLN7967A NTN4633C NTN4633C Desktop, Rapid Charge Rate, 117V NTN4634B Desktop, Rapid Charge Rate, 220V, 50-60 Hz, (supplied with 2 prong plug) Vehicular Chargers *NTN5438A 12V DC, Vehicular Charger (16 hour charge rate) PAC-RT compatible NKN6428A 12V Cable Kit. (Only required if not used with a PAC-RT/mobile system) Compact Chargers The compact charger provides a 16 hour charge rate. The charger’s small size and weight make it ideal for users who occasionally charge their radio at home. NTN5368A RF Adapter (Utilizes universal connector, incompatible with audio accessories) NTN4666B Compact, Regular Charge Rate, 117V NTN5368A NTN4667A Compact, Regular Charge Rate, 220V, 50-60 Hz, (supplied with 2 prong plug) NKN6408A RF Cable Kit (Does not include antenna) NTN4666B NKN6408A *Not compatible with Kits NKN6149A, NKN6150A and NKN6151A. 112 8/03 HT600 Series Portable Accessories Battery Maintenance System plus (BMS plus) Battery Optimizing System II (BOS II) Using interchangeable battery adapters (sold separately), the BMSplus is capable of charging and discharging, analyzing, conditioning and cycle test on batteries; tracking battery voltage and capacity (mAh). The BMSplus offers a 3 year warranty. Its easy-to-use design supports hundreds of 2-way, cellular, and camcorder batteries with printer port* (Serial-RS-232C port – uses female 9-pin to male 25-pin cable). WPLN4079BR Six-Station, 110V AC, 50/60 Hz WPLN4080BR Six-Station, 230V AC, 50/60 Hz WPLN4124AR No other battery analyzer matches the speed, accuracy, and versatility of the Battery Optimizing System II. Ideal for large fleet, public safety, and all other users who rely on their battery performance. Now with increased power, more sophisticated programming options, and easier to use navigation paths, optimizing your batteries was never easier. Key features include: • Support for NiCd, NiMH, Li-ion, and SLA batteries • 100 watt power supply and programmable from 100 mAH to 4 amps per station WPLN4079BR BMS plus Adapter TDN9441A Standard Adapter, HT600 • Interchangeable adapters accomodate all major brands • Includes a variety of user programs and allows for customizable programming • Proprietary recondition cycle restores NiCd and NiMH batteries • Increased processing power and testing resolution – including a three minute Quicktest that measures the batteries State of Health (SoH) • Printer output for reports and labels • Three year warranty WPLN4124AR BOS II, Four-Station, 100-240V AC (US line cord) WPLN4125AR BOS II, Four-Station, 100-240V AC (UK/Euro line cords) BOS II Adapter RL-71173 Standard Adapter, HT600 *Compatible with the STAR Micronics SP200 series printers, available from any STAR Micronics distributor, and other printers with STAR emulation. https://www.motorola.com/businessonline 113 8/03 HT600 Series Portable Accessories Motorola Conditioning Charger (MCC) Carrying Accessories Carrying Cases The MCC will help extend battery life and enhance battery operation. It will safely condition and charge your specified Nickel Cadmium (NiCd) and Nickel Metal Hydride (NiMH) batteries in approximately an hour. A variety of carrying accessories are available for your comfort and convenience. The carrying cases are made of top quality leather and are available in sizes designed to fit your radio and battery. Cases are available with standard belt loop or swivel back covers, with a restraining T-strap. Standard WPPN4009BR 110V AC Base Charge Unit with Adapter Plate WPPN4009AR NTN5460B 3080384G15 Cigarette Lighter Adapter Cord RLN4814A Mounting Bracket for Motorola Conditioning Chargers MCC Multi-Unit Conditioning Chargers WPPN4074BR Four-station, 110V with permanent adapter plates WPPN4075BR Four-station, 220V with permanent adapter plates NTN5460B Leather Carry Case with T-Strap and Spacer, for High or Medium Capacity Battery (Snap) Swivel NTN5461B Leather Carry Case with T-Strap, Spacer and 2-1⁄2˝ Belt Loop, for High or Medium Capacity Battery (Snap) NTN5883A Leather Carry Case with T-strap, Spacer, and Belt Loop, for High or Medium Capacity Battery (Snap), fits 3˝ Belt NTN5450B Leather DTMF Swivel Carry Case, Long (Snap), fits 2-1⁄4˝ Belt NTN5884A Leather DTMF Carry Case, Long (Snap), fits 3˝ Belt 114 8/03 HT600 Series Portable Accessories Carrying Accessories Carrying Accessories Belt Loops 4282421J06 Swivel Belt Loop, 2-1⁄2˝ Carrying Strap 4205857B01 Swivel Belt Loop, 2˝ NTN5243A Carrying Strap, Black NTN5243A Belt Clip 4282421J06 NTN4813B Belt Clip, 1-1⁄2˝ NTN5389B Belt Clip, 2-1⁄4˝ NTN4813B Belt 4200865599 1-3/4˝ Wide Leather Belt, for all models NTN5602A Public Safety Full 3˝ Clip, Black Aluminum 4200865599 T-Straps Belt Clip Carry Holder 4205386S03 T-strap, Nylon for Leather Carrying Cases (Snap) NTN4814C Belt Clip Carry Holder, fits 2-1⁄4˝ Belt 4205386S01 T-Strap, Nylon for Leather Carrying Cases (Velcro) NTN5827A Belt Clip Carry Holder, fits 3˝ Belt 4205386S01 4205447R03 T-Strap, Urethane, for Carry Holder (Snap) NTN4814C 4205447R03 Portable Radio Hanger The portable radio hanger slides over and hangs from the door panel in a vehicle. The radio’s belt clip slides onto the portable hanger allowing convenient, easy mounting. Two sizes are available to fit door panels. TDN9327A Portable Radio Hanger, for Door Panels up to 2-3⁄4˝ Spacer Enables light capacity battery to fit in a small case and medium capacity battery to fit in a medium case. Spacer is included in every carry case. 4305525R02 Spacer (spare) TDN9373A Portable Radio Hanger, for Door Panels 2-3⁄4˝ to 3-1⁄4˝ Button Back Cover TDN9327A NTN5497A T-Bar Button Back Cover Kit, Black (order swivel belt loop separately) NTN5497A https://www.motorola.com/businessonline 115 8/03 HT600 Series Portable Accessories Carrying Accessories Universal Carry Accessories HLN6602A Universal Chest Pack with Radio Holder, Pen Holder and Velcro Secured Pocket Audio Accessories NTN5050A UHF Public Safety Speaker Microphone with velcro back and straight cord (order antenna and velcro patch separately) Antennas for Public Safety Microphones 8505309N09...........400-440 MHz 1505596Z02 Replacement Strap for HLN6602 8505309N10...........440-470 MHz RLN4815A Universal RadioPAK™ with Radio Holder. Worn around waist HLN6602A with adjustable belt. Includes attached 6” by 8” zippered pouch for other job necessities RLN4570A Break-A-Way Chest Pack; all of the same features as the original chest pack (HLN6602A) plus break-a-way tabs that allow that allow the entire pack to be pulled off with approximately 10 lbs of pressure. 4280384F89 Universal RadioPAK™ belt lengthener; fits waists larger than 40” 8505309N11...........470-512 MHz NLN8410A Velcro pin attachment NLN8410A Ear Piece 5083693B01 Earphone and volume control (requires NTN4812B) 5083693B04 Earpiece and Volume Control (2.5 mm) 5880378B84 2.5 to 3.5 Jack Adapter 5880380B35 3.5 to 2.5 Jack Adapter NTN4812B Earphone Jack Adapter Audio Accessories Flexible Ear Receiver Remote Speaker Microphone NMN6156B This speaker microphone provides remote talk and listen capability. By attaching the microphone to the universal connector, you can use the remote speaker microphone to transmit or receive while the radio remains comfortably on the belt in the case. NMN6145B Remote Speaker Microphone with Clip, Coil Cord and 2.5 mm Earphone Jack NMN6156B Remote Speaker/ Microphone with Clip and Coil Cord NTN5493A UHF Public Safety Remote Speaker Microphone with Clip Back and Straight Cord (Order required antenna separately) BDN6717B BDN6717B Ear receiver with 3.5 mm plug rests on the outside of the ear, to be used with adapter NTN4812 Surveillance ZMN6031A Three wire surveillance accessory with microphone and push-to-talk separate. Factory Mutual Approved. Requires NTN5075B ZMN6032A Two wire surveillance accessory with microphone and push-to-talk combined. Factory Mutual Approved. Requires NTN5075B ZMN6031A NTN5075B Hirose Adapter for Two- and Three-Wire Surveillance Accessories. 116 8/03 HT600 Series Portable Accessories Audio Accessories RLN4294A Audio Accessories Epaulet Strap Ear Microphone System Black leather epaulet straps secure remote speaker microphones to epaulet of shirts or jackets and attach around cord. Allows reliable communications in hostile environments with Velcro or clip style strap. This compact unit picks up the voice through bone vibrations in the ear canal. Ideal for use in high noise environments. Available in PTT or Voice activated (VOX) capabilities for total hands free communications. Order Interface Module separately. *BDN6677A Ear Microphone for Standard Noise Levels (up to 95 dB), Black RLN4294A Epaulet Strap, Velcro *BDN6678A Ear Microphone for Standard Noise Levels (up to 95 dB), Beige RLN4295A Epaulet Strap, Small Clip BDN6677A *BDN6641A Ear Microphone for High Noise Levels (up to 105 dB), Grey RLN4295A Interface Modules Ear Mics Single unit microphone and speaker worn in the ear. Eliminates the need for handheld microphones or conventional headsets. Compact, rugged design allows use under hearing protectors and protective clothing. Order cable separately. *BDN6656B Push-To-Talk Interface Module *BDN6657B Voice-Activated Interface Module BDN6657B (shown with BDN6677A) Optional Accessories RMN4001B Ear Mike, EM200 0180359A39 Interface Cable for HT600 0180300E25 Earguard with Adjustable Loop RMN4001B *0180358B38 Remote Push-To-Talk Ring Switch 0180358B38 0180358B32 Earholder, Black, Size Small; Secures microphone in ear 0180358B33 Earholder, Black, Size Medium; Secures microphone in ear 0180359A51 Optional PTT Ring Switch for RMN4001A only 0180358B34 Earholder, Black, Size Large; Secures microphone in ear 0180356B97 Optional PTT Ring Switch for RMN4001B Only 0180358B35 Earholder, Clear, Size Small; Secures microphone in ear 0180359A51 0180358B33 0180358B36 Earholder, Clear, Size Medium, Secures microphone in ear 0180358B37 Earholder, Clear, Size Large; Secures microphone in ear 4280369E44 Replaceable Belt Clip with Screws 5080358B28 Eartips, Black, Size Medium (10 per pack) 5080358B29 Eartips, Black, Size Large (10 per pack) 5080358B30 Eartips, Beige, Size Medium (10 per pack) 5080358B31 Eartips, Beige, Size Large (10 per pack) * Intrinsically safe https://www.motorola.com/businessonline 117 8/03 HT600 Series Portable Accessories Audio Accessories Audio Accessories Headsets Vehicular Adapter Accessories High noise level headset (up to 125 dB) with noise cancelling microphone and push-to-talk switch located on ear cup. Vox module contained within headset on voice activated units. Factory Mutual Approved. NOTE: Can be worn with or without hard hat or fire helmet. The Basic MVA console kits may be ordered separately. These items allow use of the portable radio in a mobile application. Order antenna separately. NSN6054A 12-watt External Speaker BDN6639A Radio Adapter Cable for BDN6635, BDN6636 and BDN6645 HMN1035C Microphone, Heavy-Duty Palm NSN6054A BDN6645A Push-To-Talk Headset with Boom Microphone, Requires Adapter Cable. BDN6645A BDN6636B Voice-Activated Headset with Throat Microphone, Requires Adapter Cable, Includes 110V Charger RMN4015A Lightweight Headset with Swivel Boom Microphone, single speaker and in-line PTT BDN6636B 0180357B05 Spare Vox Headset Charger 6881126E79 Instruction Manual for BDN6645A 6881126E78 Instruction Manual for BDN6635B and BDN6636B 8/03 HMN3013A Microphone, DTMF HMN1056D BDN6635B Voice-Activated Headset with Boom Microphone, Requires Adapter Cable, Includes 110V Charger 118 HMN1056D Microphone, Compact Palm HT600 Series Antennas, Batteries Portable Antennas Portable Batteries Heliflex Antenna Nickel-Cadmium Premium Motorola Heliflex antennas are specifically engineered for maximum output and greatest communication coverage. 8505816K01 Heliflex Molded, 136-150.8 MHz, 6.5” 8505816K21 Heliflex Molded, 150.8-162 MHz, 6” 8505816K23 Heliflex Molded, 162-174 MHz, 6” 8505816K24 Heliflex Molded, 403-433 MHz, 3” 8505816K23 8505816K25 Heliflex Molded, 440-470 MHz, 3” 8505816K26 Heliflex Molded, 470-512 MHz, 3” 8505816K26 Part Number: Volts: Avg. mAh: Height: Intrinsically Safe: NTN4564B 10 550 2-7⁄16˝ Yes Part Number: Volts: Avg. mAh: Height: Intrinsically Safe: NTN4584BR 10 630 2-7⁄16˝ No Part Number: Volts: Avg. mAh: Height: Intrinsically Safe: NTN5414BR 10 1100 3-5⁄16˝ No Part Number: Volts: Avg. mAh: Height: Intrinsically Safe: NTN5415B 10 1000 3-5⁄16˝ Yes NTN4564B NTN5414BR Flexible Whip Flexible Whip antennas have a one-piece finish and steel core for optimal radiation characteristics. Provides more comfort when radio is worn on the belt. 8505247K06 Flexible Whip, 403-512 MHz, 5.5” Nickel Metal Hydride Premium 8505247K06 Part Number: Volts: Avg. mAh: Height: Intrinsically Safe: NTN7016A 10 950 2-7⁄16˝ No NTN7016A https://www.motorola.com/businessonline 119 8/03 HT600 Series Service Tools, Aids Alignment Tool Service Aids 6605106N01 Tuning Tool, Adjusts Tunable Coils, Preselector, Reference Oscillator Frequency and Trimmer Capacitors 6605106N01 Battery Adapter Replaces radio housing during servicing and provides easy mounting for battery eliminator, RTL4226B. 1580368B62 Battery Adapter Service Tools RSX4043A 1580368B62 Cloning Cable RSX4043A Torque Screwdriver, Order Bits Separately 6680321B86 #0 Phillips Bit for Radio Screws Enables the frequencies, squelch codes, squelch and deviation settings to be duplicated from one radio to another. Only identical models and sub-models are compatible for cloning. 6680321B79 #1 Phillips Power Bit for Radio Screws NKN6376A Cloning Cable 6680370B95 Spanner Tool Bit for Toggle Switch Nut 6680371B34 6680321B86 6680371B34 Spanner Bit for Antenna Bushing 6680371B03 Nut Driver Bit for Volume Control and Frequency Select Switch NKN6376A Antenna Adapters NTN5368A Adapter for HT600 NKN6408A Cable Adapter for HT600 Service Aids Radio Test and Programming Cable Battery Eliminator Used with Portable Radio Test Set, RTX4005, for transmitter, receiver alignment and performance checks. Also used in programming radio. The Battery Eliminator acts like a battery with a cable to access a DC external power supply. It is ideal to inspect transmitters and receivers on incoming radios. Reverse supply polarity protection and input fuse protection are provided. RTL4226B Battery Eliminator 120 8/03 RTK4205C RTL4226B RTK4205C Test and Programming Cable HT600 Series Service Aids, Manuals Service Aids Service Aids Radio Interface Box Field Modification Kit Links radio programming cable and computer interface together. Provides required voltage shift to enable communications between radio and computer. Requires computer RLN4008E interface cable, radio test and programming cable, and a 9 volt snap type battery (6082728J01), order separately. Allows for quick field modification of RTX4005 “A” test sets to provide operation with the HT600 Radio. RPX4665A Field Modification, RTX4005A RLN4008E Radio Interface Box Computer Interface Cable Used to connect computer’s serial adapter to radio interface box. 3080369B71 Cable, RIB to 25 pin D RPX4665A Programming Aid 3080369B72 Cable, RIB to 9 pin D Enables programming of the DTMF pad from outside of HT600 DTMF optioned radios. 3080369B71 REN4000A 0180358A59 Programming Aid Controller Flex Extender Programming Software Allows access to all electrical points on the controller flex and the interior of the RF board for troubleshooting purposes. Utilizing your personal computer, this software enables you to add or reprogram frequencies as your requirements change. Compatible with IBM, XT, AT, Model 30 50, 60 and 80. Requires Radio Interface Box and proper cables, order separately. REN4000A Controller Flex Extender RVN4005H Programming Software, 3-1⁄2˝ diskettes (includes manual and software box) Manuals Wall Mounted Power Supply Used to supply power to the radio interface box, RLN4008E 0180357A57 Wall Mounted Power Supply, 110 Volts 6881065C75 Service Manual 0180305J46 Ear Microphone System and Temple Transducer CD-ROM 0180358A56 Wall Mounted Power Supply, 220 Volts 01800357A57 https://www.motorola.com/businessonline 121 8/03
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 12 Producer : AFPL Ghostscript 8.54 Create Date : 2007:04:13 17:17:27 Modify Date : 2007:04:13 17:17:27 Title : moto_portable.pdf Creator : PrimoPDF http://www.primopdf.com Author : BobEXIF Metadata provided by EXIF.tools