Motorola Other Bluetooth Headsets H300 Owners Manual C

: Motorola Motorola-Other-Bluetooth-Headsets-H300-Owners-Manual motorola-other-bluetooth-headsets-h300-owners-manual motorola pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

BEFORE YOU
BEGIN

Start Here > > >

Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.

H300
Bluetooth®
Handsfree Headset
Get Connected in
4 Quick Steps
1 - INSERT BATTERY
2 - START
BLUETOOTH
FEATURE
3 - PAIR
4 - TEST AND USE

Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
1-800-461-4575 (Canada)
Part Number: 6809495A08-A
If you need more help, contact us at
1-877-MOTOBLU.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The Bluetooth trademarks are
owned by their proprietor and used by Motorola, Inc. under
license. All other product or service names are the property of
their respective owners.
The use of wireless devices and their accessories may be
prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.
© Motorola, Inc. 2005.

1

INSERT BATTERY
In Your Headset

Call
Button

Volume
Buttons

Insert a new battery into your headset:

Microphone

Speaker

Earhook

Your phone's Bluetooth feature is off by
default. To use your headset, turn on the
Bluetooth feature in your phone.
For most Motorola phones:
(Menu ) > Settings > Connection >
1 Select M(

Bluetooth Link > Setup.

1 Open the battery door at the back of the
headset.

Battery
Door

START BLUETOOTH
Feature
On Your Phone

Take a moment before you get started to
familiarize yourself with your new
H300 Handsfree Headset.
Blue
Indicator
Light

2

2 Insert a new battery so that the + and 3

2 Scroll to Power.
3 Press Change.

markings match the markings in the
battery compartment.

4 Scroll to On.

Close the battery door.

5 Press Select to turn on the Bluetooth

feature. Bluetooth feature remains on until
you turn it off.

Note: These steps are for most Motorola phones. For
other phones, see your phone's user's guide.

3

PAIR

PAIR

Your Phone

Your Headset

Step A - PUT HEADSET IN PAIRING MODE
Before you can use your headset, you must
pair (link) it with your phone.
Call
Button

Blue
Indicator
Light

1 With the headset power off, press and hold
the Call button for 6 to 10 seconds until the
blue indicator light turns on and remains
steadily lit. (The light will flash while you
hold the Call button.)

Step B - SET THE PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
(Menu ) > Settings > Connection >
1 Select M(

Bluetooth Link > Handsfree > Look for Devices.
The phone lists all Bluetooth devices it finds.
Select Motorola H300.

TEST AND USE

Your phone and headset are now paired and
ready to make and receive calls. To confirm
they are operating properly, make a call:

1 Place the headset over your ear. See

"Wearing the Headset" on the reverse side
of this guide.

2
3 Press OK or Yes to pair (link) the handsfree

2 On your phone, dial the number you want

4

3 If your phone and headset are successfully

device.
Enter the passkey 0000 and press OK.
Note: Passkey cannot be changed
from 0000.

2 If the indicator light is flashing or does not

When your headset is successfully paired with
your phone, the blue indicator light changes
from steadily lit to flashing.

Note: To turn off headset, see "Turning On and Off" on the
reverse side of this guide.

Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.

remain steadily lit, turn off the headset and
repeat step 1.

4

to call and press the Send key.

paired, you will hear ringing on the headset.

After you have successfully paired your phone
and headset, you do not need to repeat these
initial setup steps each time you use the
headset.

TROUBLESHOOTING
My phone does not find my headset.
Make sure the blue light on your headset is
steadily lit when your phone is searching for
devices (see step 3).
My headset worked before but now it's
not working.
Make sure your phone is on and the
Bluetooth feature is turned on in your phone
(see step 2). If the Bluetooth feature has
been turned off or was turned on only
temporarily, you may need to restart the
Bluetooth feature (see step 2). If you have
confirmed the Bluetooth feature is on in your
phone, pair your phone and headset again
(see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/bluetooth and click
Support.

USING YOUR H300
See Features and Functions Guide
on the reverse side
of this guide
for information on
using your H300.

WEARING THE
HEADSET

TURNING ON AND OFF
H300
Bluetooth®
Handsfree Headset

IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H300.
FOR MORE INFORMATION ON USING
YOUR MOTOROLA H300
Visit us at www.hellomoto.com/bluetooth and
click Support.
SUPPORT
If you need more help, contact us at
1-877-MOTOBLU.

To turn your headset on, press and hold
the Call button until the indicator light
flashes. Then, release the button.
To turn your headset off, press and hold
the Call button until the indicator light
flashes rapidly and then turns off.

1 Open the earhook.
2 Loop the earhook over your ear.
3 Press the headset to your ear.

CHANGING FOR USE
ON OTHER EAR
You can wear your H300 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:

2 Press the Call button and the Volume

2 Gently lift and pull the

1 Open Earhook

top of the earhook up
and off the upper hinge
pin. Then, pull it away to
remove it.

2 Pull Earhook Up
040059o

3 Flip the headset over.

Call
Button

4 Hook the bottom of the

earhook onto the lower
hinge pin, then lift and pull
the top of the earhook over
the upper hinge pin.

MAKING CALLS

MAKING CALLS CONTINUED

Function

Action

Function

Action

Make a voice dial call

Tap the Call button
and speak the
name after the tone

Toggle between two
active calls

Press and hold
the Call button

End a call

Tap the Call button

Join a 3-way call

Press and hold
both Volume buttons

Receive a call

Tap the Call button

Reject a call

Press and hold the
Call button until you
hear a beep

Put an active call on
hold or resume a call
on hold

Press and hold the
Call button until you
hear a beep

Transfer a call from the
phone to the headset

Tap the Call button

Disable or enable the
indicator light

Press and hold
both Volume
buttons for 3 to 4
seconds

Mute or unmute a call

Tap both Volume
buttons

Redial last call

Press and hold the
Call button until you
hear a beep

Answer a second
incoming call

Press and hold the
Call button (places
first call on hold)

Note: Your H300 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.

Note: Some features are phone/network dependent.

If you change your headset to wear on the
other ear, you can also change the
orientation of the Volume buttons.

1 Turn the headset power off.

1 Open the earhook 90
degrees from the
headset.

To conserve battery power, turn off your
headset when you don't plan to use it for
a while.

CHANGING VOLUME
BUTTON ORIENTATION

button you want to assign as the
"volume up" button until the blue
indicator light flashes twice.
The headset power turns on.
Call
Button

Volume
Buttons

Hinge Pin

INDICATOR LIGHTS

AUDIO TONES

The indicator lights provide information about
your headset status.

The audio tones provide information about your
headset status.

Indicator Light
Off
On (steady)
10 rapid flashes
Slow pulse

Audio Tone
Single high tone when
pressing volume button
Five rapid high tones
repeated every 60 sec.
No audio indications;
deteriorating quality
Ring tone
Single high tone
Single low tone
Dual high/low tone

Quick flash

Headset Status
Power off
Pairing mode
Pairing successful
Connected
(on a call)
Standby
(not on call)

Note: After 5 minutes of inactivity, the light stops flashing
to conserve power, but the headset remains in standby
mode.

Single high tone
Low to high tone
Two ascending tones
Two descending tones

Headset Status
Volume at minimum
or maximum
Low battery
Out of range
Incoming call
Pairing confirmation
Voice activation
Voice tag not
recognized
End call
Phone network
not available
Mute enabled
Mute disabled



---

Source Exif Data:

File Type                       : AI
File Type Extension             : ai
MIME Type                       : application/vnd.adobe.illustrator
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
About                           : uuid:fce96fff-abfe-40f0-b899-1d0be935e35c
Producer                        : Adobe PDF library 5.00
Create Date                     : 2005:09:15 15:02:56-05:00
Modify Date                     : 2005:09:19 14:51:09-04:00
Creator Tool                    : Adobe Illustrator 10.0
Metadata Date                   : 2005:09:19 14:51:09-04:00
Document ID                     : uuid:00f35e15-1728-4ed4-a3f6-a2ec23e3a624
Instance ID                     : uuid:eb891e05-1287-48cd-b639-1b2ae00efc03
Format                          : application/pdf
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 10.0
For                             : Rick Lazier, Harbor Light Communications, Inc.
Title                           : C:\Harbor Light Communications\Projects\MOT\Work Files\H300\QSG\Rev A\Latest\9495a08a_Front.eps
Bounding Box                    : -54 -649 1103 54
Container Version               : 9
Creator Version                 : 10

EXIF Metadata provided by EXIF.tools