Motorola Radius Gm300 Users Manual 6880902Z26 A Operating Instructions For The 8 Channel Conventional FM Radio

GM300 to the manual d70def8f-6f98-46ae-aebb-155d563cf840

: Motorola Motorola-Radius-Gm300-Users-Manual-272096 motorola-radius-gm300-users-manual-272096 motorola pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Operating Instructions for the Motorola
Radius® GM300 8-Channel, Conventional FM Radio
ON/OFF CHANNEL MONITOR SCAN
VOLUME
UP
LED
LED

TRANSMIT/
BUSY LED

+

MICROPHONE
CONNECTOR

CHANNEL
DOWN

MONITOR

SELECT

SPEAKER

SCAN

To turn the radio on
Turn the ON/OFF VOLUME knob to the right until it clicks. The LED lights will show the last status of the radio, and a start-up tone will be heard.
To receive
Set the volume by turning the ON/OFF VOLUME knob clockwise.
Select the channel by pressing the UP/DOWN (
through the channels.

/

) button. An extended press will scroll

To monitor a channel, push the MONITOR ( ) button or take the microphone off hook. When
in the monitor mode, the amber MONITOR LED will light steadily.
To unsquelch the radio, press and hold the MONITOR (
To leave the unsquelched mode, press the MONITOR (
radio to the coded squelch (PL/DPL) mode.

) button for two seconds.
) button again. This will return the

A short beep tone will be heard whenever a keypress is made.
To transmit
When the channel is clear, press and hold down the Push-to-Talk (PTT) button on the side of the
microphone, and speak slowly and clearly. The TRANSMIT/BUSY LED will remain red until the
PTT button is released to indicate that you are “on the air”.
The red TRANSMIT/BUSY LED will flash whenever there is another carrier on the selected channel.
NOTE:

If your radio has the Time-out-timer (TOT) function activated, transmission will terminate if you hold the PTT button down for over 60 seconds or the programmed time
period. When this occurs, an alert tone sounds four seconds before the transmission is
cut. To resume transmitting, release the PTT and push again.

*6880902Z26*
6880902Z26-A

CHANNEL SCAN
The 8-channel, GM300 mobile may have a single-user scan list which can be programmed from
the front panel.
To turn scan on or off
Press the SCAN (

) button. The radio will only scan when the microphone is on-hook.

The green scan LED will turn on, and display segments will light to indicate that scan is functional. Use the SELECT button to advance through the various scan types:
User Scan

Priority User Scan

When an active channel is detected, the channel number will be displayed and you will hear the
call. To leave scan, press the SCAN ( ) button.
To respond to scanned channel activity
When the microphone is lifted off-hook, the radio will suspend scanning and return to the channel displayed before entering scan. If you wish to transmit on another channel, press the
UP/DOWN (
/ ) button to reach the desired channel. Scan will resume after replacing the
microphone on-hook.
When scanning with priority, the green scan LED will flash to indicate activity on Priority One
and light steady for Priority Two.
To delete a nuisance channel
While receiving an undesired transmission, hold down the SELECT ( + ) button for two seconds
and the nuisance channel will be temporarily deleted (until scan is exited or the radio is turned
off). Priority channels and the home channel cannot be deleted.
To create or modify the user list
Hold the SCAN ( ) button for two seconds until you hear a second chirp tone and the channel
number flashes. The displayed channel can be added or deleted from the user list by pressing the
SELECT ( + ) button.
A vertical segment in the upper left corner of the display will light and
flash, alternating with the channel number to indicate that the flashing
channel has been added to the scan list. The segment will disappear when
the channel is deleted.
Use the UP/DOWN (
/ ) and SELECT ( + ) buttons to add or delete
other desired channels in the user list.
To select priorities for the user list
Go to the desired channel and hold the SELECT ( + ) button down for two seconds. The scan LED
will flash to indicate that this is the first priority channel. Repeat the process to select a second
priority channel. Priority Two will be indicated by a steady light on the scan LED.
The Priority-One channel must be programmed first, followed by the Priority-Two channel.
Deleting either of the priority channels will delete both channels simultaneously.

© 1997 by Motorola, Inc.
8000 West Sunrise Blvd.
Ft. Lauderdale, FL 33322

, Motorola, MaxTrac, PL, and DPL
are trademarks of Motorola, Inc.

Printed in U.S.A.
All Rights Reserved.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Create Date                     : 1998:06:30 15:20:16Z
Subject                         : Operating Instructions
Keywords                        : 02Z26, 6880902Z26, Operating Instructions, Radius, GM300, 8-Channel, Conventional, FM, Operator Card
Modify Date                     : 2002:09:23 22:13:26-06:00
Page Count                      : 2
Page Mode                       : UseOutlines
Page Layout                     : SinglePage
Creation Date                   : 1998:06:30 15:20:16Z
Producer                        : Acrobat Distiller 3.01 for Power Macintosh
Author                          : Motorola
Mod Date                        : 2002:09:23 22:13:26-06:00
Metadata Date                   : 2002:09:23 22:13:26-06:00
Creator                         : Motorola
Title                           : 6880902Z26-A Operating Instructions for the Motorola Radius GM300 8-Channel Conventional FM Radio
Description                     : Operating Instructions

EXIF Metadata provided by EXIF.tools