Motorola Sbg6580 Owners Manual Wireless Cable Modem Gateway
2014-11-12
: Motorola Motorola-Sbg6580-Owners-Manual-110543 motorola-sbg6580-owners-manual-110543 motorola pdf
Open the PDF directly: View PDF 
.
Page Count: 74
| Download | |
| Open PDF In Browser | View PDF |
User Guide SURFboard® SBG6580 Wireless Cable Modem Gateway © 2014 ARRIS Enterprises, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from ARRIS Enterprises, Inc. (“ARRIS”). ARRIS reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of ARRIS to provide notification of such revision or change. ARRIS and the ARRIS logo are all trademarks of ARRIS Enterprises, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and the names of their products. ARRIS disclaims proprietary interest in the marks and names of others. Wi-Fi Alliance®, Wi-Fi®, the Wi-Fi logo, the Wi-Fi CERTIFIED logo, Wi-Fi Protected Access® (WPA), the Wi-Fi Protected Setup logo, and WMM® are registered trademarks of Wi-Fi Alliance. Wi-Fi Protected Setup™, Wi-Fi Multimedia™, and WPA2™ are trademarks of Wi-Fi Alliance. ARRIS provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. ARRIS may make improvements or changes in the product(s) described in this manual at any time. The capabilities, system requirements and/or compatibility with third-party products described herein are subject to change without notice. Safety and Regulatory Information i Safety and Regulatory Information IMPORTANT SAFETY INSTRUCTIONS Read This Before You Begin — When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: • Read all of the instructions listed here and/or in the user manual before you operate this device. Give particular attention to all safety precautions. Retain the instructions for future reference. • This device must be installed and used in strict accordance with manufacturer’s instructions, as described in the user documentation that is included with the device. • Comply with all warning and caution statements in the instructions. Observe all warning and caution symbols that are affixed to this device. • To prevent fire or shock hazard, do not expose this device to rain or moisture. The device must not be exposed to dripping or splashing. Do not place objects filled with liquids, such as vases, on the device. • This device was qualified under test conditions that included the use of the supplied cables between system components. To ensure regulatory and safety compliance, use only the provided power and interface cables and install them properly. • Different types of cord sets may be used for connections to the main POWER supply circuit. Use only a main line cord that complies with all applicable device safety requirements of the country of use. • Installation of this device must be in accordance with national wiring codes and conform to local regulations. • Operate this device only from the type of power source indicated on the device’s marking label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. • Do not overload outlets or extension cords, as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire hazard. • Route power supply cords so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords where they are attached to plugs and convenience receptacles, and examine the point where they exit from the device. • Place this device in a location that is close enough to an electrical outlet to accommodate the length of the power cord. • Place the device to allow for easy access when disconnecting the power cord of the device from the AC wall outlet. • Do not connect the plug into an extension cord, receptacle, or other outlet unless the plug can be fully inserted with no part of the blades exposed. • Place this device on a stable surface. • Avoid damaging the device with static by touching the coaxial cable when it is attached to the earth-grounded coaxial cable-TV wall outlet. • Always first touch the coaxial cable connector on the device when disconnecting or reconnecting the Ethernet cable from the device or user’s PC. • It is recommended that the customer install an AC surge protector in the AC outlet to which this device is connected. This is to avoid damaging the device by local lightning strikes and other electrical surges. • Postpone installation until there is no risk of thunderstorm or lightning activity in the area. • Do not use this product near water: for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. • Do not cover the device or block the airflow to the device with any other objects. Keep the device away from excessive heat and humidity and keep the device free from vibration and dust. • Wipe the device with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the device or use forced air to remove dust. • For added protection, unplug the device from the wall outlet and disconnect the cables to avoid damage to this device due to lightning and power surges. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 i Safety and Regulatory Information • Upon completion of any service or repairs to this device, ask the service technician to perform safety checks to determine that the device is in safe operating condition. • Do not open the device. Do not perform any servicing other than that contained in the installation and troubleshooting instructions. Refer all servicing to qualified service personnel. • This device should not be used in an environment that exceeds 104º F (40º C). SAVE THE ABOVE INSTRUCTIONS Note to CATV System Installer — This reminder is provided to call the CATV system installer’s attention to Articles 820.93 and 820.100 of the National Electric Code, which provides guidelines for proper grounding and, in particular, specifies that the Coaxial cable shield shall be connected to the grounding system of the building, as close to the point of cable entry as practical. FCC STATEMENTS FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the device and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION: Any changes or modifications not expressly approved by ARRIS for compliance could void the user’s authority to operate the equipment. FCC RADIATION EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with the FCC RF exposure compliance requirements, the separation distance between the antenna and any person’s body (including hands, wrists, feet and ankles) must be at least 20 cm (8 inches). This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except those already approved in this filing. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destinations. The firmware setting is not accessible by the end user. INDUSTRY CANADA (IC) STATEMENT This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: • This device may not cause interference, and • This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3 (B)/NMB-3 (B) In Canada, RLAN devices are restricted from using the 5600-5650 MHz frequency band. CAUTION: To reduce the potential for harmful interference to co-channel mobile satellite systems, use of the 5150-5250 MHz frequency band is restricted to indoor use only. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz frequency bands. These radars could cause interference and/or damage to License Exempt–Local Area Network (LE-LAN) devices. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 ii Safety and Regulatory Information IC RADIATION EXPOSURE STATEMENT IMPORTANT NOTE: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. AVIS D'INDUSTRIE CANADA (IC) Cet appareil est conforme à la réglementation RSS-210 d'Industrie Canada. Son utilisation est assujettie aux deux conditions suivantes : • Cet appareil ne doit pas causer d'interférences et • Cet appareil doit accepter toute interférence reçue, y compris les interférences causant un fonctionnement non désiré. CAN ICES-3 (B)/NMB-3 (B) Au Canada, les appareils de réseau local sans fil ne sont pas autorisés à utiliser les bandes de fréquence 5600-5650 MHz. AVERTISSEMENT: afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux, les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l'intérieur Les radars à haute puissance sont définis en tant qu'utilisateurs principaux (c.-à-d. prioritaires) des bandes de fréquences 5250-5350 MHz et 5650-5850 MHz. Ces radars peuvent causer de l'interférence ou des dommages susceptibles de nuire aux appareils exempts de licence–réseau local (LAN-EL). DÉCLARATION DE IC SUR L'EXPOSITION AUX RAYONNEMENTS NOTE IMPORTANTE : cet équipement est conforme aux limites d'exposition aux rayonnements établies par IC pour un environnement non contrôlé. Cet équipement doit être installé et utilisé de manière à maintenir une distance d'au moins 20 cm entre la source de rayonnement et votre corps. WIRELESS LAN INFORMATION This device is a wireless network product that uses Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency-Division Multiple Access (OFDMA) radio technologies. The device is designed to be interoperable with any other wireless DSSS and OFDMA products that comply with: • The IEEE 802.11 Standard on Wireless LANs (Revision B, Revision G, and Revision N), as defined and approved by the Institute of Electrical Electronics Engineers • The Wireless Fidelity (Wi-Fi) certification as defined by the Wireless Ethernet Compatibility Alliance (WECA). RESTRICTIONS ON THE USE OF WIRELESS DEVICES In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building or responsible representatives of the organization. For example, using wireless equipment in any environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the applicable policy for the use of wireless equipment in a specific organization or environment, you are encouraged to ask for authorization to use the device prior to turning on the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this product, or the substitution or attachment of connecting cables and equipment other than specified by the manufacturer. Correction of the interference caused by such unauthorized modification, substitution, or attachment is the responsibility of the user. The manufacturer and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from failing to comply with these guidelines. Note: The use of the 5150-5250 MHz frequency band is restricted to Indoor Use Only. SECURITY WARNING: This device allows you to create a wireless network. Wireless network connections may be accessible by unauthorized users. For more information on how to protect your network, see the Change the Default User Name and Password for instructions or visit the ARRIS Support website: www.arrisi.com/consumer. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 iii Safety and Regulatory Information CARING FOR THE ENVIRONMENT BY RECYCLING When you see this symbol on a ARRIS product, do not dispose of the product with residential or commercial waste. Recycling your ARRIS Equipment Please do not dispose of this product with your residential or commercial waste. Some countries or regions, such as the European Union, have set up systems to collect and recycle electrical and electronic waste items. Contact your local authorities for information about practices established for your region. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 iv Contents Contents Safety and Regulatory Information ..................................................................................................................... i Getting Started .................................................................................................................................................... 1 In The Box ............................................................................................................................................................................................................ 1 Additional Items You May Need ................................................................................................................................................................. 2 System Requirements ..................................................................................................................................................................................... 2 Contact Information ........................................................................................................................................................................................ 2 Product Overview ................................................................................................................................................ 3 Front Panel .......................................................................................................................................................................................................... 3 Wi-Fi Protected Setup™ (WPS) ............................................................................................................................................................ 4 Rear Panel ............................................................................................................................................................................................................ 5 Gateway Label ................................................................................................................................................................................................... 6 Installing the Gateway ........................................................................................................................................ 7 Connect the SBG6580 to Your Computer ............................................................................................................................................... 7 Establish an Internet Connection ............................................................................................................................................................... 8 Wall Mount the Gateway ............................................................................................................................................................................... 8 Wall Mounting Template .................................................................................................................................................................... 10 Setting Up a Wireless Network Connection ..................................................................................................... 11 Launch the SBG6580 Quick Start Wizard .............................................................................................................................................. 11 Set Up a Wireless Network Connection Using Your Computer .................................................................................................... 13 Quick Connect Using the Windows Taskbar ............................................................................................................................... 13 Connect Using the Windows Control Panel ................................................................................................................................ 15 Use the SBG6580 WPS Pairing Button .................................................................................................................................................... 17 Test Your Wireless Network Connection ............................................................................................................................................... 18 Managing Your Gateway and Connected Networks ....................................................................................... 19 Start the Gateway Web Manager ............................................................................................................................................................. 19 Gateway Web Manager Menu Options ......................................................................................................................................... 20 Get Help ............................................................................................................................................................................................................. 21 Overview Help ........................................................................................................................................................................................ 22 Help Links ................................................................................................................................................................................................. 22 Field Level Help ...................................................................................................................................................................................... 22 View the Gateway Product Information ................................................................................................................................................ 23 View the Gateway Status ............................................................................................................................................................................. 23 Back Up Your Gateway Configuration .................................................................................................................................................... 24 Restore Your Gateway Settings ................................................................................................................................................................ 25 Reset Your Gateway Settings ..................................................................................................................................................................... 25 Exit the SBG6580 Web Manager ............................................................................................................................................................... 26 Protecting & Monitoring Your Wireless Network ............................................................................................ 27 Prevent Unauthorized Access.................................................................................................................................................................... 27 SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 v Contents Change the Default User Name and Password ................................................................................................................................... 27 Set Up Firewall Protection .......................................................................................................................................................................... 29 Set Up Parental Controls ............................................................................................................................................................................. 30 Set Up Port Triggers ...................................................................................................................................................................................... 31 Set Up the DMZ Host .................................................................................................................................................................................... 33 Store Remote Firewall Logs ........................................................................................................................................................................ 33 Creating Wi-Fi Networks ................................................................................................................................... 35 Set Up Your Wireless Primary Network .................................................................................................................................................. 35 Set Up a Wireless Guest Network ............................................................................................................................................................. 36 Change Your Wireless Network Name (SSID) ...................................................................................................................................... 37 Change the Wireless Channel .................................................................................................................................................................... 39 Troubleshooting Tips ........................................................................................................................................ 40 Solutions ............................................................................................................................................................................................................ 40 Front Panel LED Icons and Error Conditions ........................................................................................................................................ 41 Gateway Configuration Screen Definitions ..................................................................................................... 42 Basic Screens .................................................................................................................................................................................................... 42 Basic Setup ............................................................................................................................................................................................... 42 DHCP .......................................................................................................................................................................................................... 43 DDNS .......................................................................................................................................................................................................... 45 Backup and Restore .............................................................................................................................................................................. 46 Advanced Screens .......................................................................................................................................................................................... 47 Options ...................................................................................................................................................................................................... 47 IP Filtering................................................................................................................................................................................................. 49 MAC Filtering........................................................................................................................................................................................... 50 Port Filtering ............................................................................................................................................................................................ 50 Port Triggers ............................................................................................................................................................................................ 51 Port Forwarding ..................................................................................................................................................................................... 52 DMZ Host .................................................................................................................................................................................................. 54 Firewall Screens............................................................................................................................................................................................... 55 Protection Level ..................................................................................................................................................................................... 55 Parental Control ..................................................................................................................................................................................... 56 Local Log ................................................................................................................................................................................................... 58 Remote Log .............................................................................................................................................................................................. 59 Warranty Information ....................................................................................................................................... 61 SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 vi Contents Tables Table 1: SBG6580 Package Contents ........................................................................................................................................................ 1 Table 2: SBG6580 Front Panel LED Icons ................................................................................................................................................. 3 Table 3: SBG6580 Rear Panel Ports & Connectors ................................................................................................................................ 5 Table 4: SBG6580 Web Manager Main Menu Options ..................................................................................................................... 21 Table 5: Troubleshooting Solutions ........................................................................................................................................................ 40 Table 6: Front Panel LED Icons and Error Conditions ....................................................................................................................... 41 Table 7: Basic Setup Screen-Field Descriptions .................................................................................................................................. 43 Table 8: Basic DHCP Screen-Field Descriptions .................................................................................................................................. 44 Table 9: Basic DDNS Screen-Field Descriptions .................................................................................................................................. 45 Table 10: Basic Backup & Restore-Field Descriptions ....................................................................................................................... 46 Table 11: Advanced Options-Field Descriptions ................................................................................................................................ 48 Table 12: Advanced IP Filtering-Field Descriptions .......................................................................................................................... 49 Table 13: Advanced MAC Filtering-Field Descriptions .................................................................................................................... 50 Table 14: Advanced Port Filtering-Field Descriptions ...................................................................................................................... 51 Table 15: Advanced Port Triggers-Field Descriptions ...................................................................................................................... 52 Table 16: Advanced Port Forwarding-Field Descriptions ............................................................................................................... 54 Table 17: Advanced DMZ Host-Field Descriptions ............................................................................................................................ 54 Table 18: Firewall Protection Level-Field Descriptions .................................................................................................................... 56 Table 19: Firewall Parental Control-Set Time Zone-Field Descriptions ..................................................................................... 57 Table 20: Firewall Parental Control-Field Descriptions .................................................................................................................... 57 Table 21: Firewall Local Log-Field Descriptions.................................................................................................................................. 59 Table 22: Firewall Remote Log-Field Descriptions ............................................................................................................................ 60 Figures Figure 1 – SBG6580 Front Views ................................................................................................................................................................. 3 Figure 2 – SBG6580 Rear Views ................................................................................................................................................................... 5 Figure 3 – SBG6580 Gateway Label ........................................................................................................................................................... 6 Figure 4 – SBG6580 Connection Diagram .............................................................................................................................................. 7 Figure 5 – Wall Mount-Screw Head Dimensions .................................................................................................................................. 9 Figure 6 – SBG6580 Wall Mounting Template .................................................................................................................................... 10 Figure 7 – SBG6580 Quick Start Wizard Opening Screen ............................................................................................................... 12 Figure 8 – SBG6580 Quick Start Wizard Welcome Screen .............................................................................................................. 12 Figure 9 – Windows Taskbar Icons........................................................................................................................................................... 13 Figure 10 – Available Wireless Networks .............................................................................................................................................. 14 Figure 11 –Network Connection Window ............................................................................................................................................ 14 Figure 12 –Network Connection-Create Network Password Window ...................................................................................... 15 Figure 13 – Control Panel-Network and Sharing Center Window .............................................................................................. 15 SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 vii Contents Figure 14 – Manually Connect to a Wireless Network Window ................................................................................................... 16 Figure 15 – Manually Connect to a Wireless Network Window ................................................................................................... 16 Figure 16 – SBG6580 Main Screen ........................................................................................................................................................... 20 Figure 17 – SBG6580 Web Manager Main Menu Buttons............................................................................................................... 20 Figure 18 – SBG6580 Web Manager Main Menu Links .................................................................................................................... 21 Figure 19 – Help Overview Screen ........................................................................................................................................................... 22 Figure 20 – Help Links Screen.................................................................................................................................................................... 22 Figure 21 – SBG6580 Status – Product Information Screen ........................................................................................................... 23 Figure 22 – SBG6580 Status Connection Screen ................................................................................................................................ 24 Figure 23 – SBG6580 Backup and Restore Screen ............................................................................................................................. 25 Figure 24 – Restore Factory Defaults Screen ....................................................................................................................................... 26 Figure 25 – Change User Name Screen.................................................................................................................................................. 28 Figure 26 – Change User Password Screen .......................................................................................................................................... 28 Figure 27 – Firewall Protection Level Screen....................................................................................................................................... 29 Figure 28 – Parental Control-Change Time Zone Screen ............................................................................................................... 30 Figure 29 – Firewall Parental Control Screen....................................................................................................................................... 31 Figure 30 – Advanced Port Triggers Screen ......................................................................................................................................... 32 Figure 31 – Create Port Triggers Screen ................................................................................................................................................ 32 Figure 32 – Advanced DMZ Host Screen............................................................................................................................................... 33 Figure 33 – Firewall Remote Log Screen ............................................................................................................................................... 34 Figure 34 – Wireless Primary Network Screen..................................................................................................................................... 35 Figure 35 – Wireless Guest Network Screen ........................................................................................................................................ 37 Figure 36 – Wireless Primary Network Page ........................................................................................................................................ 38 Figure 37 – Wireless 802.11 Radio Screen............................................................................................................................................. 39 Figure 38 – Basic Setup Screen ................................................................................................................................................................. 42 Figure 39 – Basic DHCP Screen ................................................................................................................................................................. 44 Figure 40 – Basic DDNS Screen ................................................................................................................................................................. 45 Figure 41 – Basic Backup & Restore Screen .......................................................................................................................................... 46 Figure 42 – Advanced Options Screen ................................................................................................................................................... 47 Figure 43 – Advanced IP Filtering Screen ............................................................................................................................................. 49 Figure 44 – Advanced MAC Filtering Screen ....................................................................................................................................... 50 Figure 45 – Advanced Port Filtering Screen......................................................................................................................................... 51 Figure 46 – Advanced Create Port Triggers Screen .......................................................................................................................... 51 Figure 47 – Advanced Port Triggers Screen ......................................................................................................................................... 52 Figure 48 – Commonly Used Port Forwarding Port Numbers List .............................................................................................. 53 Figure 49 – Advanced Create Port Forwarding Screen ................................................................................................................... 53 Figure 50 – Advanced Port Forwarding Screen .................................................................................................................................. 53 Figure 51 – Advanced DMZ Host Screen............................................................................................................................................... 54 Figure 52 – Firewall Protection Level Screen....................................................................................................................................... 55 Figure 53 – Firewall Parental Control-Set Time Zone Screen ........................................................................................................ 56 Figure 54 – Firewall Parental Control Screen....................................................................................................................................... 57 SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 viii Contents Figure 55 – Firewall Local Log Screen .................................................................................................................................................... 58 Figure 56 – Firewall Remote Log Screen ............................................................................................................................................... 60 SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 ix Getting Started Getting Started 1 The ARRIS Motorola SURFboard® SBG6580 Wireless Cable Modem Gateway is an all in one wireless DOCSIS 3.0® cable modem and four-port Ethernet router device. It provides secure ultra high-speed wired and wireless broadband connections for your computer and other wireless network devices on your home or small business network. The SBG6580 also includes a Wi-Fi® Pairing button option for quick and easy connections for your wireless devices. This guide provides instructions for installing and configuring the SBG6580, setting up secure wireless network connections, and managing your gateway and network configurations. Note: The information in this user guide is based on the SBG6580 Firmware version 8.6.0.0 or higher. Some of the changes implemented in this newer firmware version may not be applicable to earlier firmware releases. If the information and graphics in this guide do not match your SBG6580, please refer to an earlier version of the SBG6580 User Guide (Part number: 574808-001-e). In The Box Note: For retail purchases only, if you purchased the SBG6580 Wireless Cable Modem Gateway from a retail store, the items listed below should be included in the box. Otherwise, if you received your SBG6580 from your service provider, some of the listed items may not be included with the gateway. Before installing the SBG6580, check that the following items are also included in the box. If any items are missing, please contact your service provider for assistance or call ARRIS Technical Support at 1-877-466-8646. Table 1: SBG6580 Package Contents Item Description SBG6580 Wireless Cable Modem Gateway (Retail or Service Provider) High-speed DOCSIS 3.0 cable modem, wireless access point, and 4-port Ethernet router Power Supply Power adapter and cord for an electrical wall outlet connection SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 1 Getting Started Item Description Ethernet Cable Standard Category 5 (CAT5) or higher network cable Software License & Regulatory Card Safety and regulatory information, software license, and warranty for the gateway SBG6580 Quick Start Guide Provides basic information for installing the gateway and setting up a secure wireless connection on your home network. Additional Items You May Need • Coaxial (coax) cable, if one is not already connected to a cable wall outlet System Requirements • High-speed Internet access account • Web browser access – Internet Explorer, Google Chrome, Firefox, or Safari • Compatible operating systems: ο Windows® 8 ο Windows 7 Service Pack 1 (SP1) ο Windows Vista™ SP2 or later ο Windows XP SP3 Note: Microsoft no longer supports Windows XP. However, the SBG6580 should still function without any problems. ο Mac® 10.4 or higher ο UNIX® ο Linux® Contact Information For technical support and additional ARRIS product information: • Visit the ARRIS Support website: www.arrisi.com/consumer • Call ARRIS Technical Support: 1-877-466-8646 When you call, you may need the following information listed on the gateway label located on the bottom of the SBG6580: ο Gateway model name (SBG6580) ο Gateway MAC address (HFC MAC ID) ο Gateway serial number (S/N) SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 2 Product Overview Product Overview 2 Front Panel Figure 1 – SBG6580 Front Views Table 2: SBG6580 Front Panel LED Icons LED Icon Blinking On (Solid) Not applicable – icon does not flash Green: Power is properly connected Scanning for a downstream (receive) channel connection Green: Non-bonded downstream channel is connected Blue*: High-speed Internet connection with bonded downstream channels Scanning for an upstream (send) channel connection Green: Non-bonded upstream channel is connected Blue*: High-speed Internet connection with bonded upstream channels Scanning for an Internet connection SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 Green: Startup process completed 3 Product Overview LED Icon Blinking On (Solid) Green: Wi-Fi enabled with encrypted wireless data activity. Green: 2.4 GHz wireless connection is made between the SBG6580 and another Wi-Fi enabled device on your network; for example, printer, tablet, or laptop. Amber: Wi-Fi enabled with unencrypted wireless data activity Not applicable – no LED on button Amber: Flashes during the wireless pairing process and lights SOLID green after five seconds or less. Not applicable – no LED on button The Wireless LED (see above) will flash Amber to indicate the WPS pairing process is in progress. *Indicates DOCSIS 3.0 operation (high-speed Internet access) which may not be available in all locations. Check with your service provider for availability in your area. Wi-Fi Protected Setup™ (WPS) Wi-Fi Protected Setup (WPS) is a wireless network setup option that provides a quick and easy solution for setting up a secure wireless network connection for any WPS-enabled device; such as a computer, tablet, gaming device, or printer. WPS automatically configures your wireless network connections and sets up wireless security. See Use the SBG6580 WPS Pairing Button for more information. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 4 Product Overview Rear Panel Figure 2 – SBG6580 Rear Views Table 3: SBG6580 Rear Panel Ports & Connectors Port Name 1 Description Four one-gigabit Ethernet ports for RJ-45 cable connections: • Green - LED is ON - Indicates a device connection is detected • Green - LED is Blinking - Indicates data traffic is in progress 2 Reset button Recessed button can be used to reboot the gateway or reset the gateway settings. • To reboot (or restart) the gateway, press the indented Reset button once using the end of a paper clip or other small object with a narrow tip, and then release. • To reset the gateway configuration back to the factory default settings, press and hold the indented Reset button for 15 seconds using the end of a paper clip or other small object with a narrow tip, and then release. See Reset Your Gateway Settings for more information on an alternative method to reset the gateway settings using the SBG6580 Web Manager. WARNING! Reset will also delete any custom gateway configurations, including your user passwords and other security settings. You should back up the gateway configuration files before resetting the gateway. See Back Up Your Gateway Configuration for more information. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 5 Product Overview Port Name Description 3 Coaxial cable connector 4 +12VDC Power connector WARNING! To avoid any damage to your SBG6580 Gateway, only use the power adapter and cord provided in the box. Gateway Label Figure 3 – SBG6580 Gateway Label The gateway label is located on the bottom of the SBG6580. It contains specific gateway ID information that you may need when contacting your service provider or ARRIS Technical Support. To receive Internet service, you will have to contact your service provider for assistance. Make sure you have the gateway Model (SBG6580), Gateway MAC address (HFC MAC ID), and Serial number (S/N) listed on the gateway label on the bottom of the SBG6580. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 6 Installing the Gateway Installing the Gateway 3 This product is for indoor use only. Do not route the Ethernet cable(s) outside of the building. Exposure of the cables to lightning could create a safety hazard and damage the product. Connect the SBG6580 to Your Computer Before installing the SBG6580: • • Check with your service provider to ensure broadband cable service is available in your area. Choose a location in your home where your computer and gateway are preferably near existing cable and electrical wall outlets. For the best Wi-Fi coverage, a central location in your home or building is recommended. Note: The following installation procedure covers the wired Ethernet connection process so that you can confirm that the SBG6580 was properly installed and can connect to the Internet. Figure 4 – SBG6580 Connection Diagram 1. Check that a coaxial cable is already connected to a cable wall outlet or RF splitter (optional). 2. Connect the other end of the coaxial cable to the Cable connector on the SBG6580. Use your hand to tighten the connectors to avoid damaging them. 3. Connect the Ethernet cable to an available Ethernet port on the SBG6580. 4. Connect the other end of the Ethernet cable to the Ethernet port on your computer. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 7 Installing the Gateway Optional: Repeat steps 3 and 4 for each additional computer or other network device that you want to install as a wired connection on your home network. 5. Connect the power cord to the Power port on the SBG6580. 6. Plug the other end of the power cord into an electrical wall outlet. Note: This automatically powers ON the SBG6580. Establish an Internet Connection Although your computer may already be configured to automatically access the Internet, you should still perform the following gateway connectivity test to verify that the devices were connected properly. 1. Power ON the computer connected to the SBG6580 if it is turned off, and then log in. 2. Contact your service provider to activate (provision) the SBG6580. You may have to provide the HFC MAC ID listed on the gateway label. Note: Your service provider may allow for automatic activation which will automatically launch its own special website when you open a web browser. 3. After the SBG6580 is activated, open a web browser (Internet Explorer, Google Chrome, Firefox, or Safari) on your computer. If the special website did not open, continue with step 4. If it did open, proceed to step 5. 4. Type a valid URL (www.arrisi.com) in the address bar and then click or press Enter. The ARRIS website should open. If it did not open, please contact your service provider for assistance. 5. Check that the Power, Receive, Send, and Online front panel LEDs on the SBG6580 light up in sequential order. See Front Panel for additional LED status information. ο If all four LEDs did not light up solid and you also do not have an Internet connection, you may have to contact your service provider to reactivate the SBG6580 or check for signal issues. ο If you still cannot connect to the Internet, your SBG6580 may be defective. Please contact ARRIS Technical Support at 1-877-466-8646 for assistance. Wall Mount the Gateway Note: The SBG6580 is wall mountable. Please note that wall mounting the SBG6580 is for convenience only. It may degrade the optimal Wi-Fi performance on the SBG6580. If you choose to mount the SBG6580 on a wall, please read the following before starting: • Locate the unit as specified by the local or national codes governing residential or business cable TV and communications services. • • Follow all local standards for installing a network interface unit/network interface device (NIU/NID). • • Decide if you are mounting the SBG6580 horizontally or vertically on the wall. Unplug the power cord on the SBG6580 from the electrical wall outlet and verify that all the cables are repositioned away from the back of the SBG6580 before mounting it on the wall. Gather the following items: ο Wall-mounting template or ruler/measuring tape ο Applicable screwdriver: Phillips or flathead SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 8 Installing the Gateway ο Two M3.5 (#6) screws with a flat underside and maximum screw head diameter of 9.0 mm to mount the SBG6580. Note: Contact a qualified installer to determine the appropriate screw length needed for mounting a gateway. See the dimensioned view below for the spacing needed between the screw heads and wall: Figure 5 – Wall Mount-Screw Head Dimensions Note: If possible, mount the SBG6580 to concrete, masonry, wooden stud, or some other solid wall material. Use anchor bolts if necessary (for example, if you mount the unit on drywall). Before drilling holes in the wall, check the structure for potential damage to water, gas, or electrical lines. Perform the following steps to wall mount the SBG6580: 1. Use the wall mounting template as a guide for drilling holes in the wall (see Figure 6). WARNING! The wall mounting template is intended as a sample representation of the SBG6580 side view. The mounting hole dimensions shown on the template may not be accurate. BEFORE drilling any holes in the wall, check to ensure that your measurements match the hole markings on the side of the SBG6580. There must be .10 inch (2.5 mm) between the wall and underside of the screw head. 2. Select an appropriate depth and diameter to drill the holes to a depth of at least 1½ inches (3.8 cm). Note: The installer must determine the depth of the hole, the necessary hardware and must be careful to select the appropriate depth and diameter. 3. Attach the SBG6580 to the two screws on the wall. Check that it is securely mounted. 4. Reconnect the coaxial and Ethernet cables. 5. Re-plug the power cord into the SBG6580 and the electrical outlet. 6. Arrange the cables to prevent any safety hazards. 7. Check that the gateway is still securely mounted on the wall. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 9 Installing the Gateway Wall Mounting Template Figure 6 – SBG6580 Wall Mounting Template SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 10 Setting Up a Wireless Network Connection Setting Up a Wireless Network Connection 4 It is highly recommended that you first verify that your computer can connect to the Internet using an Ethernet connection before configuring your wireless network. You must already have access to an Internet service in your home before setting up a wireless network connection. Also, make sure your computer and the SBG6580 are connected through an Ethernet connection. Choose one of the following options to set up your wireless network connection: • • • Launch the SBG6580 Quick Start Wizard Set Up a Wireless Network Connection Using Your Computer Use the SBG6580 WPS Pairing Button After setting up your wireless network connection, check to make sure your wireless network connection was set up properly. See Test Your Wireless Network Connection for more information. Launch the SBG6580 Quick Start Wizard The SBG6580 Quick Start Wizard is a six-step application to help you quickly configure the default wireless network settings on your SBG6580. It configures your wireless network name (SSID), Wi-Fi Security key (network password), and Wi-Fi Security code. IMPORTANT NOTE: The quick start wizard uses default settings already configured for your SBG6580 to set up your wireless network. You can keep the default settings for now to quickly connect your wireless network and then customize your wireless network at a later time (highly recommended). Or, you can customize your wireless network settings using the quick start wizard. 1. Open a web browser (Internet Explorer, Google Chrome, Firefox, or Safari) on the computer connected to the SBG6580. 2. Type the default LAN IP address, http://192.168.0.1, in the Address bar and then press Enter. The gateway Login screen displays. 3. Type the default username and password. Both entries are case-sensitive. Username: admin Password: motorola 4. Click Login to open the SBG6580 Web Manager. The Launch Quick Start Wizard screen displays (see Figure 7). Note: If the default user name and password are not working, your service provider may have to set up alternate login credentials. Please contact your service provider or ARRIS Technical Support for assistance. 5. Click Launch Quick Start Wizard to start the wizard. The Welcome screen displays (see Figure 8). SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 11 Setting Up a Wireless Network Connection Figure 7 – SBG6580 Quick Start Wizard Opening Screen Note: The ARRIS logo shown here and on other screenshots throughout this user guide represents the company logo for the manufacturer of the SURFboard SBG6580 Wireless Cable Modem Gateway. Figure 8 – SBG6580 Quick Start Wizard Welcome Screen 6. Click Next to open the Wi-Fi Network Name & Passphrase screen. 7. Do one of the following to set up your wireless network name in the Network Name (SSID) field: ο Keep the default network name or SSID (listed on the SBG6580 Gateway label). ο Enter a name of your choice for your wireless network. Your new network name must contain from one to 32 alphanumeric characters. Note: You have the option to customize your wireless network name (SSID) after completing the initial wireless network connection. However, you must use the default SSID listed on the gateway label for the initial gateway installation. See Change Your Wireless Network Name (SSID) for more information. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 12 Setting Up a Wireless Network Connection 8. Do one of the following to set up your wireless network password in the Passphrase / Wi-Fi Security Key field: ο Keep the default passphrase or Wi-Fi Security key (listed on the SBG6580 Gateway label). ο Enter a password of your choice for your wireless network password. The passphrase or Wi-Fi Security key is the sign-on access code for your wireless network. The access code must contain from eight to 64 characters consisting of any combination of letters, numbers, and symbols. It should be as unique as possible to protect your wireless network and deter hackers or unauthorized access to your wireless network. 9. Click Next to open the Security Configuration screen. WPA2-PSK is automatically set as the default Wi-Fi Security code for your wireless network. It is the highest wireless network security level. 10. Click Next to open the Wi-Fi Band Selection screen. 11. Do one of the following to select your wireless network frequency band in the Wi-Fi Band Selection field: ο Keep the default 2.4 GHz Band (recommended). ο Select 5 GHz Band. Note: The 2.4 GHz frequency range is recommended for backward compatibility purposes because older wireless devices cannot connect to 5 GHz frequencies. 12. Click Next to open the Review Settings screen and verify your wireless network settings. 13. Click Apply to accept the wireless network settings and open the Settings Applied screen or click Previous to go back and make changes. 14. Click Exit on the Settings Applied screen. Note: You can click Print for a printout of your wireless network settings for later use for logging onto your network or changing your wireless network settings. Set Up a Wireless Network Connection Using Your Computer Use one of the following options to create your wireless network: • Quick Connect Using the Windows Taskbar • Connect Using the Windows Control Panel Note: The steps for setting up a wireless network may differ slightly depending on the Windows operating system running on your computer. The steps used here apply to Windows 7. Quick Connect Using the Windows Taskbar 1. From the Windows taskbar, click the Wireless Link icon to open the list of available wireless networks (see Figure 10). If the icon is not visible, click the Show hidden icons button (see Figure 9). Figure 9 – Windows Taskbar Icons SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 13 Setting Up a Wireless Network Connection Figure 10 – Available Wireless Networks 2. Locate the Motorola wireless network name or SSID (MOTOROLA-#####) for your SBG6580 from the list of wireless network connections. The SSID is located on the gateway label on the bottom of your SBG6580. Note: You have the option to customize your wireless network name or SSID after completing your initial wireless network connection. However, you must use the default SSID listed on the gateway label for the initial gateway installation. See Change Your Wireless Network Name (SSID) for more information. 3. Select Connect automatically to set up your wireless devices for automatic connections to your home network upon log on and then click Connect. Figure 11 –Network Connection Window SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 14 Setting Up a Wireless Network Connection 4. Enter a wireless network security code or passphrase for your wireless network password in the Security key field. You can use the Wi-Fi Security Key code listed on the SBG6580 gateway label or create your own personal password. Note: Remember to use a unique combination of letters, numbers, and characters to create a more secure password. See Prevent Unauthorized Access for more information. 5. Select Hide characters and then click OK to encrypt your network Security key or network password. Figure 12 –Network Connection-Create Network Password Window Connect Using the Windows Control Panel 1. From the Windows taskbar, click Start button and then click Control Panel. 2. Click Network and Sharing Center to open the Network and Sharing Center window. Figure 13 – Control Panel-Network and Sharing Center Window SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 15 Setting Up a Wireless Network Connection 3. Click Manage wireless networks under Control Panel Home to open the Manage Wireless Networks window. 4. Click Add to open the Manually Connect to a Wireless Network window. Figure 14 – Manually Connect to a Wireless Network Window 5. Click Manually create a network profile to open another Manually Connect to a Wireless Network window. Figure 15 – Manually Connect to a Wireless Network Window 6. Enter the Motorola wireless network name or SSID (MOTOROLA-#####) for your SBG6580 in the Network name field. The SSID name is located on the gateway label on the bottom of your SBG6580. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 16 Setting Up a Wireless Network Connection Note: You have the option to customize your wireless network name or SSID after completing your initial wireless network connection. However, you must use the default SSID listed on the gateway label for the initial gateway installation. See Change Your Wireless Network Name (SSID) for more information. 7. Select the wireless Security level for your wireless network from the Security type drop-down list. Note: Select WPA2-Personal which is the highest security level. This is also the default security level for the SBG6580. 8. Select the password encryption type from the Encryption type drop-down list. This is used for securing your wireless network. ο TKIP – Temporal Key Integrity Protocol ο AES – Advanced Encryption Standard (recommended) This is the default encryption type for the SBG6580. 9. Enter a Security code or passphrase for your wireless network password in the Security Key field. You can use the WI-FI SECURITY KEY listed on the SBG6580 gateway label or create your own personal password. Note: Remember to use a unique combination of letters, numbers, and characters to create a more secure password. See Prevent Unauthorized Access for more information. 10. Select Hide characters to prevent your Security Key or password from displaying in the field. 11. Select Start this connection automatically so that your wireless devices will automatically connect to the wireless network upon login. 12. Click Next to complete the wireless network setup. The Successfully addedmessage for your new wireless network should appear. 13. Click Close to exit. Use the SBG6580 WPS Pairing Button Use the WPS Pairing Button option to connect your WPS-enabled devices. The WPS Pairing button automatically assigns a random wireless network name (SSID) and Wi-Fi Security Key to the SBG6580 and other WPS-enabled devices to connect to your wireless home network. Note: To use the WPS Pairing button option, your computer hardware must support WPS and also have WPA security compatibility. 1. Power ON your gateway and other WPS-enabled devices that you want to connect to your wireless network. 2. Press and hold the WPS button located on the bottom of the SBG6580 front panel for five to 10 seconds and then release (see Figure 1 for the SBG6580 front view). 3. If applicable, press the WPS button on your WPS-enabled computer or other WPS device. 4. Repeat step 3 for each additional WPS-enabled device that you want to connect to your wireless network. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 17 Setting Up a Wireless Network Connection Test Your Wireless Network Connection Perform the following connectivity test to check that the SBG6580 and other wireless devices are connected to your wireless home network: 1. If the devices are connected, disconnect the Ethernet cable from your computer and the SBG6580. 2. Open a web browser on your computer. 3. Type a valid URL (www.arrisi.com) in the address bar, and then click or press Enter. If the website did not open, please contact your service provider or call ARRIS Technical Support at 1-877-466-8646 for assistance. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 18 Managing Your Gateway and Connected Networks Managing Your Gateway and Connected Networks 5 Use the SBG6580 Web Manager to view and monitor the configuration settings and operational status of your gateway. You can also configure your network connections and wireless security settings. See Protecting & Monitoring Your Wireless Network for more information. Note: If you did not purchase your gateway from a retail store, you may notice a few blocked configuration settings in the SBG6580 Web Manager that cannot be modified. This may be due to some restrictions set up by your service provider to prevent unauthorized changes to certain configuration parameters. Start the Gateway Web Manager Note: You must use the default user name and password (listed below) to log in to the SBG6580 Web Manager for the first time. For network security purposes, we highly recommend that you should change the gateway default user name and password after logging onto the SBG6580 for the first time. See Change the Default User Name and Password for more information. 1. Open any web browser on the computer connected to the SBG6580. 2. In the Address bar, type 192.168.0.1 for the Gateway Web Manager IP address, and then press Enter. The gateway Login screen displays. 3. Type the default user name and password. Both entries are case-sensitive. ο Username: admin ο Password: motorola 4. Click Login to open the SBG6580 Web Manager. The SBG6580 Main Screen displays (see Figure 16). Note: If the default user name and password are not working, your service provider may have to set up alternate login credentials. Please contact your service provider or ARRIS Technical Support for assistance. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 19 Managing Your Gateway and Connected Networks Figure 16 – SBG6580 Main Screen Gateway Web Manager Menu Options Main Menu Buttons The SBG6580 main menu buttons are displayed along the top of the SBG6580 Web Manager screen. To display the drop-down submenu options, click the menu button. Figure 17 – SBG6580 Web Manager Main Menu Buttons Main Menu Links The SBG6580 main menu and related submenu option links are also displayed along the bottom of the SBG6580 Web Manager screen. To open a submenu option, click the link. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 20 Managing Your Gateway and Connected Networks Figure 18 – SBG6580 Web Manager Main Menu Links Table 4: SBG6580 Web Manager Main Menu Options Menu Option Function Home Displays the Quick Start Wizard main screen Status Provides information about the gateway hardware and software, MAC address, gateway IP address, serial number, and related information. Additional screens provide diagnostic tools and also allow you to change your gateway user name and password. Basic Configures the gateway IP-related configuration data, including Network Configuration, WAN Connection Type, DHCP, and DDNS Advanced Controls Internet protocols which configure and monitor how the gateway routes IP traffic on the SBG6580 Wireless Configures and monitors the gateway wireless networking features Firewall Configures and monitors the gateway firewall Help Provides general information to help you set up your home network Logout Closes the SBG6580 Web Manager Get Help You can choose any of the following three options to obtain help information for any SBG6580 Web Manager function. General help information is available for any SBG6580 menu option when you click the Help button on that page. • • • Overview Help Help Links Field Level Help SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 21 Managing Your Gateway and Connected Networks Overview Help General help information is available when you click Help, Overview on the SBG6580 Main Menu. Figure 19 – Help Overview Screen Help Links Provides a concise list of your gateway configuration settings with applicable links for easy access when you click Help, About on the SBG6580 Main Menu. The link opens the related configuration screen. Figure 20 – Help Links Screen Field Level Help More specific help information is available throughout the web manager for field level help when you click the Help link located to the right of the applicable field. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 22 Managing Your Gateway and Connected Networks View the Gateway Product Information The Status Product Information screen displays general product information, including the firmware version and the current network connection status of the gateway. To open the Status Product Information page: 1. Click Status on the SBG6580 Main Menu. 2. Click Product Information from the Status submenu options. 3. Click the Refresh button (F5) in your web browser to reload the information on the screen. Figure 21 – SBG6580 Status – Product Information Screen View the Gateway Status The Status Connection screen displays information about the RF upstream and downstream channels, including downstream channel frequency, upstream channel ID, and upstream and downstream signal power and modulation. This screen also displays IP lease information including the current IP address of the cable modem, the duration of both leases, the expiration time of both leases, and the current system time from the DOCSIS time server. To open the Status Connection screen: 1. Click Status on the SBG6580 Main Menu. 2. Click Connection from the Status submenu options. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 23 Managing Your Gateway and Connected Networks Figure 22 – SBG6580 Status Connection Screen Back Up Your Gateway Configuration You can save a backup copy of the current gateway settings to your local computer. You can use the backup file to restore your custom gateway settings in the event that you made changes that you no longer want. We highly recommend that you perform the gateway configuration backup using the SBG6580 default login username and password. To create a back up copy of your gateway settings: 1. Click Basic on the SBG6580 Main Menu. 2. Click Backup and Restore from the Basic submenu options. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 24 Managing Your Gateway and Connected Networks Figure 23 – SBG6580 Backup and Restore Screen 3. Click Backup and then click OK at the Select ‘Save’ prompt. 4. Click Save in the File Download dialog box to open the Save As window. 5. Select Desktop from the pull-down list. 6. Select the default GatewaySettings.bin file. 7. Select bin Document for the Save as document type. 8. Click Save and then Close to create a backup file of your SBG6580 configuration settings. Restore Your Gateway Settings WARNING! This action will delete your current gateway configuration settings and allow you to restore a previously saved gateway configuration. Note: After the configuration settings are restored, the gateway will automatically reboot and you will have to log on using the default username (admin) and password (motorola). 1. Click Basic on the SBG6580 Main Menu. 2. Click Backup and Restore from the Basic submenu options. 3. Click Browse to search for a previously saved gateway configuration file. 4. Click Restore. The gateway will automatically reboot. Reset Your Gateway Settings At any time, you can reset the SBG6580 gateway configuration settings and your user name and password back to the default factory settings. There are two methods available for resetting the gateway configurations on the SBG6580: • • Using the SBG6580 Reset button, see Reset button Using the SBG6580 Web Manager (see next page) WARNING! The factory reset process will delete all custom gateway configurations you may have already created. We recommend that you create a backup copy of your gateway configuration before resetting the gateway. See Back Up Your Gateway Configuration for more information. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 25 Managing Your Gateway and Connected Networks From the SBG6580 Web Manager, do the following to open the Status Security screen: 1. Click Status on the SBG6580 Main Menu. 2. Click Security from the Status submenu options. Figure 24 – Restore Factory Defaults Screen 3. Select Yes under Restore Factory Defaults. 4. Click Apply to reset the default username and password, and restore the original gateway configuration. The message, This action will restore factory default settings. Please reboot the modem for new settings to take effect, displays. 5. Click OK. 6. Click Status on the SBG6580 Main Menu. 7. Click Configuration from the Status submenu options to display the Status Configuration screen. 8. Click Reboot. 9. Log back in using the default username and password. ο Username: admin ο Password: motorola Exit the SBG6580 Web Manager To log out and close the SBG6580 Web Manager: • Click Logout located in the upper right corner of the screen above the SBG6580 Main Menu. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 26 Protecting & Monitoring Your Wireless Network Protecting & Monitoring Your Wireless Network 6 After you have successfully connected the SBG6580 gateway and your wireless devices, you should configure the gateway to protect your wireless network from unwanted and unauthorized access by any wireless devices within range of your wireless network. Although security for the SBG6580 gateway is already configured, you can use the SBG6580 Configuration Manager to tailor the level of security and access that you want to allow on your network. Prevent Unauthorized Access To prevent unauthorized access and configuration to your wireless network, we highly recommend that you immediately change the default user name and password after connecting to the Internet and logging on to the SBG6580 for the first time. One of the most important recommendations for securing your wireless home network is to change the default administrator password on your SBG6580 and other wireless devices as well. Default passwords are commonly used and shared on the Internet. To ensure that your wireless home network is secure, it is recommended that you follow these best practices for user passwords: • • • • Always create a secure password or passphrase that is not easily guessed. Use phrases instead of names so that it may be easier for you to remember. Use a combination of upper and lowercase letters, numbers, and symbols. Continue to change your administrator password on a regular basis. Note: If your service provider supplied the SBG6580, you may not have the necessary user privileges to change the log in user name. Change the Default User Name and Password To change the default user name for logging onto the Gateway Web Manager: 1. Log in to the SBG6580 from any web browser on the computer connected to the SBG6580. 2. Type the Gateway Web Manager IP address, http://192.168.0.1, in the Address bar and then press Enter. The gateway Login screen displays. 3. Type the default username and password as they appear below: ο Username: admin ο Password: motorola 4. Click Login to open the SBG6580 Web Manager. The SBG6580 Status Connection screen displays. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 27 Protecting & Monitoring Your Wireless Network 5. Click the Status menu button and then click Security to display the Status Security screen. 6. Confirm that Change Username is displayed in the drop-down selection box. 7. Complete each field entry, but note the following: ο All fields (for example, Current Username & Current Password) are case-sensitive. Note: For first time logons, the current username is admin and the current password is motorola. ο Make sure No is selected under Restore Factory Defaults. Figure 25 – Change User Name Screen 8. Click Apply to update your user name. 9. Click Change Username drop-down arrow to display Change Password. 10. Complete each field entry, but note the following: ο Username is the Current Username. ο All fields are case-sensitive. ο Make sure No is selected for Restore Factory Defaults. ο Find a secure place to write down and keep your new user name and password. 11. Click Apply to update your password. Figure 26 – Change User Password Screen SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 28 Protecting & Monitoring Your Wireless Network Set Up Firewall Protection You can set up firewall filters and firewall alert notifications on your wireless home network. You can also block Java Applets, Cookies, ActiveX controls, popup windows, Proxies, and website access. See Protection Level for more information. To set the firewall protection level: 1. From any screen, click the Firewall-Protection Level menu link or click the Firewall menu button on the SBG6580 Main Menu and then select Protection Level. Figure 27 – Firewall Protection Level Screen 2. Click the Firewall Protection Setting drop-down button to select the firewall protection level. Possible values: ο Off ο Low ο Medium ο High (recommended) Note: Selecting Off will disable firewall protection on your home network. Your computer(s) and other Ethernet-enabled devices on your network will be at risk for possible attacks from viruses and hackers. 3. Select each Web filter that you want to set for the firewall and then click Apply. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 29 Protecting & Monitoring Your Wireless Network Set Up Parental Controls You can set up the following Parental Controls on your home network: • Allow or block access to specific Internet sites. • Allow or block access to specific MAC addresses. • Set time limitations for computer usage or Internet access Note: Any Parental Control filters that do not include assigned ports, will apply to all ports. This also applies to MAC addresses as well. You can also link each user on your network to specified rules for login, time-access, and content filtering. See Parental Control for more information. To set Parental Controls: 1. From any screen, click the Firewall-Parental Control menu link or click the Firewall menu button on the SBG6580 Main Menu and then select Parental Control. Figure 28 – Parental Control-Change Time Zone Screen 2. Click Current Time Zone drop-down button to select your time zone. 3. Select Yes or No to automatically adjust the time for Daylight Saving Time. 4. Click Create to continue setting up Parental Controls. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 30 Protecting & Monitoring Your Wireless Network Figure 29 – Firewall Parental Control Screen 5. Enter a name for the user profile that you want to create in the Description field. 6. Enter the 12-digit (hexadecimal) MAC address of the device for which you are creating Parental Controls in the MAC Address field. 7. Enter the web address of the Internet site that you want to block or access. 8. Enter the Starting port number of the in the Start Port field. 9. Enter the Ending port number of the in the End Port field. 10. Select the days of the week that you want to allow the selected user to access the Internet. 11. Select the time range that you want to allow the selected user to access the Internet. 12. Select to Allow or Block Internet access for the time and days you set previously. 13. Select On or Off in the Enabled field to enable or disable this Parental Control restriction. 14. Click Apply, when done. Set Up Port Triggers You can use Port Triggers to configure dynamic triggers to specific devices on the LAN. This allows special applications that require specific port numbers with bi-directional traffic to function properly. Applications such as video conferencing, voice, gaming, and some messaging program features may require these special settings. Note: If you enable the firewall and set up custom port triggers, then you must configure the firewall to allow traffic through those custom ports. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 31 Protecting & Monitoring Your Wireless Network To configure Port Triggers: 1. Click Advanced on the SBG6580 Main Menu bar. 2. Click Port Triggers from the Advanced submenu options. Figure 30 – Advanced Port Triggers Screen 3. Click Create Port Triggers button to open the Add Port Triggering Entry window. 4. Enter the starting port number for the port to be triggered in the Trigger Start Port field. 5. Enter the ending port number for the port to be triggered in the Trigger End Port field. 6. Enter the starting port number of the Port Trigger range in the Target Start Port field. 7. Enter the ending port number of the Port Trigger range in the Target End Port field. 8. Select TCP, UDP, or BOTH from the Protocol drop-down list. 9. Enter a unique name in the Description field. 10. Select On to enable IP port triggers or Off to disable them. 11. Click Apply to create your port triggers. Figure 31 – Create Port Triggers Screen 12. Repeat steps 3 thru 11 for each additional port trigger that you want to create. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 32 Protecting & Monitoring Your Wireless Network Set Up the DMZ Host WARNING! The gaming DMZ host is not protected by the SBG6580 gateway firewall. It is exposed to the Internet and thus vulnerable to attacks or hacking from any computer on the Internet. Consider carefully before configuring a device to be in the DMZ. You can configure one computer on your home network to be the DMZ Host. That computer will operate outside of the SBG6580 firewall and allow remote access from the Internet to your computer, gaming device, or other IP-enabled device. The DMZ Host feature will only allow outside users to have direct access to the designated DMZ Host device and not your home network. See DMZ Host for more information. To create the DMZ Host: 1. Click Advanced on the SBG6580 Main Menu bar. 2. Click DMZ Host from the Advanced submenu options. Figure 32 – Advanced DMZ Host Screen 3. Enter the last one to three digits (from 2 to 254) of the IP address of the computer or gaming device that you are setting up as the DMZ host. 4. Click Apply. Note: Remember to reset the IP address back to 0 (zero) to close all the ports when you are finished with the needed application. If you do not reset the IP address, that computer will be exposed to the public Internet. Store Remote Firewall Logs You can store firewall attack reports or logs on a computer in your home, so that multiple instances can be logged over a period of time. You can select individual attack or configuration items to send to the SysLog server, so that only the items of interest will be monitored. Note: The SysLog server must be on the same network as the Private LAN behind the Configuration Manager (typically 192.168.0.x). To store remote Firewall logs: 1. Click the Firewall-Remote Log menu link or click the Firewall menu button on the SBG6580 Main Menu and then select Remote Log. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 33 Protecting & Monitoring Your Wireless Network Figure 33 – Firewall Remote Log Screen 2. Select all desired event types that you want to monitor. This will activate the SysLog monitoring feature. 3. Enter the last digits from 10 to 254 of the SysLog server’s IP address. Note: Normally, the IP address of this SysLog server is hard-coded so that the address always agrees with the entry on this page. 4. Click Apply. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 34 Creating Wi-Fi Networks 7 Creating Wi-Fi Networks The SBG6580 supports a secure method for setting up multiple wireless access points on your wireless home network. This enables you to designate a guest network for visitors, friends, or other family members without giving them access to your files or other devices on your primary network. You have the option to create a PIN or pushbutton method for logging onto your wireless network. Set Up Your Wireless Primary Network 1. Open a web browser and log onto the SBG6580 to open the SBG6580 Web Manager. See Start the Gateway Web Manager for more information. 2. Click Wireless on the SBG6580 Main Menu bar. 3. Click Primary Network Settings from the Wireless submenu options. Figure 34 – Wireless Primary Network Screen 4. Select Enabled or Disabled in the Wireless Network field to turn ON or OFF wireless networking on your home network. 5. Keep the default ARRIS or Motorola network name (also listed on the gateway label) or enter a name of your choice for your wireless primary network in the Network Name (SSID) field. 6. Select Enabled or Disabled in the Network Name (SSID) Broadcast field to turn ON or OFF access to the selected wireless network. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 35 Creating Wi-Fi Networks 7. Select one of the following wireless network security options for your wireless network from the Wireless Security drop-down list: ο WPA: Wi-Fi Protected Access ο WPA-PSK: Wi-Fi Protected Access with Pre-Shared Key, standard encryption ο WPA2: Wi-Fi Protected Access version 2 with Pre-Shared Key, standard encryption with the AES encryption type ο WPA2-PSK: Wi-Fi Protected Access version 2 with Pre-Shared Key (recommended) 8. Choose the wireless network encryption type in the Encryption field: ο AES – Advanced Encryption Standard: Provides the strongest encryption (recommended) ο AES+TKIP – Advanced Encryption Standard and Temporal Key Integrity Protocol: Allows both AES and TKIP-capable clients to connect to your wireless network 9. Enter any combination of characters and words in the Passphrase field. 10. Select Enabled or Disabled in the WPS field to turn ON or OFF the Wi-Fi Protected Security (WPS) network security on your home network. 11. Select one of the following methods to add or pair WPS-enabled devices: ο Push Button – Press the WPS button on the SBG6580 to start the pairing process with the WPS-enabled wireless devices you want to connect to your wireless network ο Gateway PIN – Click Generate PIN to automatically create a new numeric password for logging onto your wireless network ο Client PIN – Enter a numeric password for connecting to your wireless network and then click Add 12. Click Apply when done. Set Up a Wireless Guest Network Note: This feature may be disabled on your SBG6580. Some service providers or cable operators do not allow for secondary (or guest) wireless networks on their gateway devices. 1. Open a web browser and log onto the SBG6580 to open the SBG6580 Web Manager. See Start the Gateway Web Manager for more information. 2. Click Wireless on the SBG6580 Main Menu bar. 3. Click Guest Network on the Wireless submenu options (see Figure 35). 4. Select the guest network from the Selected Guest Network drop-down list. 5. Select Enabled or Disabled in the Guest Network field to turn ON or OFF access to the selected wireless guest network. 6. Keep the default ARRIS or Motorola network name (also listed on the gateway label) or enter a name of your choice for your wireless guest network in the Guest Network Name (SSID) field. See Change Your Wireless Network Name (SSID) for more information. 7. Select Guest from the IP Network drop-down list. 8. Enter the gateway’s IP Address for the Guest Network in the IP Address field. 9. Enter the subnet mask for the guest network in the Subnet Mask field. 10. Enter the starting IP address for the guest network lease pool in the Lease Pool Starting IP Address field. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 36 Creating Wi-Fi Networks Figure 35 – Wireless Guest Network Screen 11. Enter the ending IP address for the guest network lease pool in the Lease Pool Ending IP Address field. 12. Enter the lease time for the guest network lease pool in the Lease Time field. 13. Select Enabled or Disabled in the UPnP (Universal Plug and Play) Enable field to allow or disallow any network devices, such as smartphones, tablets, or laptops to automatically connect to your wireless home network. 14. Select Enabled or Disabled in the Firewall Enable field to turn ON or OFF the gateway firewall. 15. Select Enabled or Disabled in the DHCPv6 Server field to allow the DHCP server to send leases to the guest network clients from the guest network lease pool you specified earlier. Note: If the DHCP server is disabled, you must assign static IP addresses to the guest network STAs. 16. Select Encrypted or Unencrypted in the Wireless Security field to turn ON or OFF encryption. 17. Click Apply, when done. Change Your Wireless Network Name (SSID) The SSID (Service Set Identification) is the wireless network name assigned to your SBG6580 wireless primary and guest networks. The default SSID which is listed on the gateway label is automatically populated in the network configuration screens. A list of SSIDs of available wireless networks in close proximity of your home (for example, neighbors or local businesses) will display when you or someone else in your home attempt to establish a wireless network connection. For security purposes and quick recognition of your wireless network, it is recommended that you change the default SSID. You should also consider changing the default wireless password or passphrase (see Prevent Unauthorized Access for more information). Note: When you change the SSID, any wireless devices that are already connected to your wireless network will be disconnected from the network. The wireless devices will have to be reconnected to the wireless network using the new SSID. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 37 Creating Wi-Fi Networks Do the following to change your wireless network name or SSID: 1. Open a web browser and log onto the SBG6580 to open the SBG6580 Web Manager. See Start the Gateway Web Manager for more information. 2. Click Wireless on the SBG6580 Main Menu bar. 3. Click Primary Network Settings from the Wireless submenu options to open the Wi-Fi Network screen (see Figure 36). Figure 36 – Wireless Primary Network Page 4. Make sure Enabled is selected in the Wireless Network field to turn ON wireless networking on your home network. 5. Delete the current network name in the Network Name (SSID) field and then enter a new name of your choice for your wireless network. The network name can contain any combination of up to 32 alphanumeric characters. 6. Make sure Enabled is selected in the Network Name (SSID) Broadcast field. 7. Delete the current wireless password (passphrase) in the Passphrase field and enter a new passphrase for the wireless network password. See Prevent Unauthorized Access for more information. 8. Click Apply at the bottom of the screen. The new wireless network name should appear in the list of available wireless networks when you reconnect your wireless devices. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 38 Creating Wi-Fi Networks Change the Wireless Channel Network interference may occur at any time when using a wireless network connection. This may be caused by other wireless access points that are using the same wireless channel as your SBG6580 and are also operating within close proximity in your home. When experiencing wireless network interference, changing the wireless channel on the SBG6580 can improve network connectivity (or signal strength) and avoid network interference. By default, the SBG6580 is set on Channel 1. Do the following to change the wireless channel on the SBG6580: 1. Open a web browser and log onto the SBG6580 to open the SBG6580 Web Manager. See Start the Gateway Web Manager for more information. 2. Click Wireless on the SBG6580 Main Menu bar. 3. Click 802.11 Radio from the Wireless submenu options to open the Wireless 802.11 Radio screen (see Figure 37). Figure 37 – Wireless 802.11 Radio Screen 4. Select a channel number from the Channel drop-down list that is different from the channel number listed as the Current Channel. Note: It is recommended to use Channel 6 or 11, if it is not listed as the Current Channel. In the Wi-Fi spectrum, there are multiple channels that overlap and thus degrade wireless network performance. Channels 1, 6, and 11 are used for better network performance and stability because they do not overlap. 5. Click Apply. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 39 Troubleshooting Tips Troubleshooting Tips A If the solutions listed in this section do not solve your problem, contact your service provider for assistance. Your service provider may ask for the status of the gateway LEDs as described in Front Panel LED Icons and Error Conditions. You may have to reset the SBG6580 gateway configuration to its original factory settings if the gateway is not functioning properly. Solutions Table 5: Troubleshooting Solutions Gateway Problem Possible Solution POWER LED Icon is OFF • Check the power connection on the gateway and to the electrical outlet. • Check that the electrical outlet is working (is the outlet controlled by a light switch?). If so, disconnect the gateway power cord and connect to another electrical outlet that is not controlled by a light switch. Cannot Send or Receive Data • Check each end of the coaxial cable connection on the gateway and cable outlet. Hand tighten each connector, if necessary. • Check the Ethernet cable to make sure it is properly connected to the gateway and computer. • On the front panel, check the status of the LED icons and refer to Front Panel LED Icons and Error Conditions to identify the problem. • If you have cable television service, check your television to ensure your cable service is operating properly. • If none of the above resolves the problem, contact your service provider for further assistance or call ARRIS Technical Support for assistance at 1-877-466-8646. Cannot Access the Internet • Check that all cable and power connections are properly connected. • Check that the Power, Online, and Wireless LED icons on the front panel are lit up solid. • Contact your service provider for assistance. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 40 Troubleshooting Tips Gateway Problem Possible Solution Wireless devices cannot send or receive data • If the problem still persists after checking the coaxial cable and Ethernet connections and your IP address, check the Wireless Security Mode setting on the Wireless Primary Network screen. • If you enabled WPA and configured a passphrase on the gateway, be sure each affected wireless client has the identical passphrase. If this does not solve the problem, check if the wireless client supports WPA. • If you enabled WEP and configured a key on the gateway, be sure each affected wireless client has the identical WEP key. If this does not solve the problem, check whether the client’s wireless adapter supports the type of WEP key configured on the gateway. Front Panel LED Icons and Error Conditions The SBG6580 front panel LED icons provide status information for the following error conditions: Table 6: Front Panel LED Icons and Error Conditions LED Icon Status If, During Startup: If, During Normal Operation OFF Gateway is not properly plugged into the electrical outlet Gateway is unplugged FLASHING Downstream receive channel cannot be acquired Downstream channel is lost FLASHING Upstream send channel cannot be acquired Upstream channel is lost FLASHING OFF IP registration is unsuccessful Led is disabled SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 IP registration is lost Led is disabled 41 Gateway Configuration Screen Definitions Gateway Configuration Screen Definitions B This section provides detailed field definitions for the following ARRIS SBG6580 network configuration screens: • • • Basic Advanced Firewall Basic Screens Basic Setup You can use the SBG6580 Basic Setup screen to configure basic SBG6580 IP-related configuration data, including your local network configuration, and WAN connection type. Figure 38 – Basic Setup Screen SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 42 Gateway Configuration Screen Definitions Table 7: Basic Setup Screen-Field Descriptions Field Description Gateway Mode Sets the device mode: Routed: Allows the internal network devices to use IP addresses from the WAN subnet. Bridged: Disables the network address and port translation settings on the gateway. NAPT: Network Address Port Translation – this is the most common form of network address translation (NAT) between public and private IP addresses. NAPT maps one public IP address to multiple private IP addresses. If NAPT is set on the Basic Setup screen, one public IP address is mapped to an individual private IP address for up to 245 LAN clients. Primary Network Only Mode Sets the device mode for the primary network only: Routed: Allows the internal network devices to use IP addresses from the WAN subnet. Bridged: Disables the network address and port translation settings on the gateway. LAN IP Address MAC Address WAN IP Address MAC Address WAN (continued) Duration Expires The IP address of the SBG6580 on your home network (LAN). Media Access Control address is set of 12 hexadecimal digits that are assigned during manufacturing to uniquely identify the hardware address of the SBG6580 access point. The public WAN IP address of your SBG6580, which is either dynamically or statically assigned by the cable operator Media Access Control address — a set of 12 hexadecimal digits assigned during manufacturing that uniquely identifies the hardware address of the SBG6580 access point. Describes how long before your Internet connection expires, The WAN lease will automatically renew itself when it expires. Displays the exact time and date the WAN lease expires Release WAN Lease Click to release the WAN lease Renew WAN Lease Click to renew the WAN lease DHCP You can use the Basic DHCP (Dynamic Host Configuration Protocol) screen to configure the IP settings of your SBG6580 gateway and the DHCP server on your home network. You can also view the status of the optional internal SBG6580 DHCP server. WARNING! Do not modify these setting unless you are an experienced network administrator with a strong understanding of IP addressing, sub-netting, and DHCP. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 43 Gateway Configuration Screen Definitions Figure 39 – Basic DHCP Screen Table 8: Basic DHCP Screen-Field Descriptions Field Description LAN Network Configuration LAN IP Address The IP address of the SBG6580 on your home network (LAN). Enable DHCP Server Checkmark Enabled to enable the SBG6580 DHCP Server. Uncheck Enabled to disable the SBG6580 DHCP Server. Starting Local Address Enter the starting IP address to be assigned by the SBG6580 DHCP server to clients in dotted-decimal format. Default is 192.168.0.2. Max Number of Network Devices Sets the maximum number of clients for the SBG6580 DHCP server to assign a private IP address. Lease Time Sets the time in seconds that the SBG6580 DHCP server leases an IP address to a client. The default is 3600 seconds (60 minutes). Reserve IP Address Lists clients in which the DHCP server reserves a specific IP address on the home network (LAN) Client List Lists the DHCP client device information. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 44 Gateway Configuration Screen Definitions DDNS You can use the Basic DDNS (Dynamic Domain Name System) screen to set up the DDNS service to assign a static Internet domain name to a dynamic IP address. This allows various servers on the Internet to access your computer for processing your requests when you are visiting various Internet sites. Figure 40 – Basic DDNS Screen Table 9: Basic DDNS Screen-Field Descriptions Field Description DDNS Service Select Disabled or select wwwDynDNS.org to enable the DDNS service Username Enter your user name for the Dynamic Domain Name system Password Enter your password for the Dynamic Domain Name system Host Name Enter the host name for the Dynamic Domain Name system IP Address Displays the IP address Status Shows if the DDNS service is Enabled or Disabled SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 45 Gateway Configuration Screen Definitions Backup and Restore You can use the Basic Backup and Restore screen to save a backup copy of the current SBG6580 gateway configuration settings locally on your computer or restore previously saved gateway configurations. Figure 41 – Basic Backup & Restore Screen Table 10: Basic Backup & Restore-Field Descriptions Field Description Browse Allows you to search for a file on your computer to retrieve or save the gateway configuration. Restore Restores a previously saved gateway configuration. Backup Creates a back up copy of the current gateway configuration. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 46 Gateway Configuration Screen Definitions Advanced Screens Options You can use the Advanced Options to set the operating modes for adjusting how the SBG6580 routes IP traffic on your home network. Figure 42 – Advanced Options Screen SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 47 Gateway Configuration Screen Definitions Table 11: Advanced Options-Field Descriptions Field Description WAN Blocking Prevents the SBG6580 Web Manager or the computers behind it from being visible to other computers on the SBG6580 WAN. IPsec Pass-through Enables the IPsec Pass-through protocol to be used through the SBG6580 Web Manager so that a VPN device (or software) may communicate properly with the WAN. PPTP Pass-through Enables the Point-to-Point Tunneling Protocol (PPTP) Pass-through protocol to be used through the SBG6580 Web Manager so that a VPN device (or software) may communicate properly with the WAN. Remote Config Management Allows remote access to the SBG6580 Web Manager. This enables you to configure the SBG6580 WAN by accessing the WAN IP address at Port 8080 of the SBG6580 Web Manager from anywhere on the Internet. For example, in the Internet browser URL window, type http://WanIPAddress:8080/ to access the SBG6580 Web Manager remotely. Multicast Enable Allows multicast-specific traffic (denoted by a multicast specific address) to be passed to and from the computers on the home network (LAN) behind the SBG6580 Web Manager. UPnP Enable Turns on the Universal Plug and Play protocol (UPnP) agent in the SBG6580 Web Manager. Select this option, if you are running a CPE (client) application that requires UPnP. NAT ALG Status Turn ON or OFF the various Network Address Translation (NAT) and Application Level Gateway (ALG) status options on your wireless network Add MAC Address Enter the MAC address for the computer you want to block and click Add MAC Address button. Repeat for up to 20 MAC addresses. Remove MAC Address Enter the MAC address filter that you want to delete or block, then click Remove MAC Address button. Clear All button Deletes all of your MAC Address filters. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 48 Gateway Configuration Screen Definitions IP Filtering IP filtering allows you to define which local computers will be denied access to the SBG6580 WAN. You can configure IP address filters to block Internet traffic to specific network devices on your home network by entering the starting and ending IP address ranges. Note: You only have to enter the LSB (Least-significant byte) of the IP address; the upper bytes of the IP address are set automatically from the SBG6580 Web Manager’s IP address. Figure 43 – Advanced IP Filtering Screen Table 12: Advanced IP Filtering-Field Descriptions Field Description Start Address Enter the starting IP address range of the computers for which you want to deny access to the SBG6580 WAN. Be sure to only enter the least significant byte of the IP address. End Address Enter the ending IP address range of the computers you want to deny access to the SBG6580 WAN. Be sure to only enter the least significant byte of the IP address. Enabled Activates the IP address filter, when selected. Select Enabled for each range of IP addresses you want to deny access to the SBG6580 WAN. When done, click Apply to activate and save your settings. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 49 Gateway Configuration Screen Definitions MAC Filtering MAC filtering allows you to define up to twenty Media Access Control (MAC) address filters to prevent computers from sending outgoing TCP/UDP traffic to the WAN via their MAC addresses. This is useful because the MAC address of a specific NIC card never changes, unlike its IP address, which can be assigned via the DHCP server or hard-coded to various addresses over time. Figure 44 – Advanced MAC Filtering Screen Table 13: Advanced MAC Filtering-Field Descriptions Field Description Add MAC Address Enter the MAC address for the computer you want to block and click Add MAC Address button. Repeat for up to 20 MAC addresses. Remove MAC Address Enter the MAC address filter that you want to delete block and click Remove MAC Address button. Clear All button Deletes all of your MAC Address filters. Port Filtering Port filtering allows you to define port filters to prevent all devices from sending outgoing TCP/UDP traffic to the WAN on specific IP port numbers. By specifying a starting and ending port range, you can determine what TCP/UDP traffic is allowed out to the WAN on a per-port basis. Note: The specified port ranges are blocked for ALL computers, and this setting is not IP address or MAC address specific. For example, if you wanted to block all computers on your home network from accessing HTTP sites (or web surfing), you would create the following port filter and then click Apply when done: • • • • Set Start Port to 80 Set End Port to 80 Set Protocol to TCP Select Enabled SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 50 Gateway Configuration Screen Definitions Figure 45 – Advanced Port Filtering Screen Table 14: Advanced Port Filtering-Field Descriptions Field Description Start Port The starting port number of the Port Filtering range. End Port The ending port number of the Port Filtering range. Protocol Select TCP, UDP, or BOTH from the drop-down list. Enabled Select to activate or deselect to deactivate the selected IP port triggers. Port Triggers You can use Port Triggers to configure dynamic triggers to specific devices on the LAN. This allows special applications that require specific port numbers with bi-directional traffic to function properly. Applications such as video conferencing, voice, gaming, and some messaging program features may require these special settings. Figure 46 – Advanced Create Port Triggers Screen SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 51 Gateway Configuration Screen Definitions Figure 47 – Advanced Port Triggers Screen Table 15: Advanced Port Triggers-Field Descriptions Field Description Trigger Start Port The starting port number of the Port Trigger range. Trigger End Port The ending port number of the Port Trigger range. Target Start Port The starting port number of the Port Target range. Target End Port The ending port number of the Port Target range. Protocol Available protocols: TCP, UDP, or BOTH Description Name to identify the port trigger. Enabled Lets you turn On or Off the selected IP port triggers. Port Forwarding Port forwarding allows you to run a publicly accessible server on your home network by specifying the mapping of TCP/UDP ports to a local computer. This enables incoming requests on specific port numbers to reach web servers, FTP servers, and mail servers, for example; so that they can be accessible from the Internet. To map a port, you must enter the range of port numbers that want forwarded locally and the IP address to which traffic to those ports should be sent. If you only want a single port specification, enter the same port number in the start and end locations for that IP address. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 52 Gateway Configuration Screen Definitions A table of commonly used port numbers is also displayed on the page for your convenience. These are some of the ports used by common applications: Figure 48 – Commonly Used Port Forwarding Port Numbers List Figure 49 – Advanced Create Port Forwarding Screen Figure 50 – Advanced Port Forwarding Screen SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 53 Gateway Configuration Screen Definitions Table 16: Advanced Port Forwarding-Field Descriptions Field Description External IP Address & Start/End Port The range of ports that you want to allow for incoming traffic to be forwarded from a remote IP address. Local IP Address & Start/End Port The range of ports that you want to allow for incoming traffic to be forwarded from a local IP address. Description Name to identify the port trigger. Protocol Available protocols: TCP, UDP, or BOTH Enabled Lets you turn On or Off port forwarding. DMZ Host You can configure one computer on your home network as the DMZ Host. That computer will operate outside of the SBG6580 firewall. This feature allows you to set up a separate subnetwork for remote access from the Internet to your computer, gaming devices, or other IP-enabled device so that your home network is not exposed to hackers or other external attacks from the Internet. Outside users will only have direct access to the designated DMZ Host device and not your home network. If you set up a computer as the DMZ Host, remember to set the IP address back to zero (0) when you are finished with the needed application, since this computer will be exposed to the Internet. Although the computer is protected from Denial of Service (DoS) attacks via the SBG6580 firewall, it is still exposed to the Internet. Figure 51 – Advanced DMZ Host Screen Table 17: Advanced DMZ Host-Field Descriptions Field Description DMZ Host Enter the IP address of the selected computer you are setting up as the DMZ host. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 54 Gateway Configuration Screen Definitions Firewall Screens You can configure firewall filters and alert notifications for your home network. The SBG6580 firewall protects the SBG6580 LAN from unwanted attacks and other intrusions on the Internet. Firewall protection also provides the following benefits: • Advanced, integrated stateful-inspection firewall supporting intrusion detection, session tracking, and denial-of-service attack prevention. • • Maintains state data for every TCP/IP session on the OSI network and transport layers. • Monitors all incoming and outgoing packets, applies the firewall policy to each one, and screens for improper packets and intrusion attempts. Generates comprehensive notifications for the following: ο User authentications ο Rejected internal and external connection requests ο Session creation and termination ο Outside attacks (intrusion detection) Protection Level The Firewall Protection Level screen has various settings related to blocking or exclusively allowing different types of data through the SBG6580 from the WAN to the LAN. There are three security firewall protection levels which correspond to how many services are allowed: • • • • High - Safest configuration, highest security Medium - Common configuration, modest risk Low - Minimum security, higher risk Off - No security, highest risk Firewall protection enables the Stateful Packet Inspection (SPI) firewall features. Block Fragmented IP packets prevent all fragmented IP packets from passing through the firewall. Port Scan Detection detects and blocks port scan activity originating on both the LAN and WAN. IP Flood Detection detects and blocks packet floods originating on both the LAN and WAN. You can block Java Applets, Cookies, ActiveX controls, pop up windows, and Proxies. Figure 52 – Firewall Protection Level Screen SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 55 Gateway Configuration Screen Definitions Table 18: Firewall Protection Level-Field Descriptions Field Description Firewall Protection Level • Select Low, Medium, or High to set the level of firewall protection that you want for your gateway. • Select Off to disable firewall protection. Note: If you choose to disable firewall protection, your computer(s) and other Ethernet-enabled devices on your home network will be at risk for possible attacks from viruses and hackers. Firewall Settings • Checkmark to enable each filter that you want to set for the firewall. • Click Apply, when done. Allowed Services Listing of the websites you selected to allow access to from your home network. Parental Control You can use the Parental Control screen to set up user access restrictions on a specific device connected to your SBG6580 network. You can set up the following Parental Controls: • • • • Allow or block access to specific Internet sites. Allow or block access to specific MAC addresses. Allow or block Internet access based on specific day and time settings. Enable or disable Internet session duration timers to limit the amount of time for Internet access. Note: When creating Parental Control access filters, remember to assign the Start and End ports. Otherwise, any filters without assigned ports will apply to all ports. This also applies to MAC addresses. Figure 53 – Firewall Parental Control-Set Time Zone Screen SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 56 Gateway Configuration Screen Definitions Table 19: Firewall Parental Control-Set Time Zone-Field Descriptions Field Description Current Time Enter the current time. Current Time Zone Select your time zone. Automatically Adjust for Daylight Saving Time Select Yes or No if you want the time to change for Daylight Saving Time. Figure 54 – Firewall Parental Control Screen Table 20: Firewall Parental Control-Field Descriptions Field Description Description Enter a name to create a new user profile. MAC Address Enter the 12-digit (hexadecimal) hardware address of the device that you are setting up for parental controls. The MAC addressed is assigned by the hardware manufacturer and should be located on the device label. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 57 Gateway Configuration Screen Definitions Field Description URL Enter the web address of the Internet site that you want to block or access. Start Port Enter the starting port number of the range of ports for which you want to block incoming or outgoing access. Default port is 0. End Port Enter the ending port number of the range of ports for which you want to block incoming or outgoing access. Default port is 0. Protocol Select TCP, UDP, or Both for the Internet protocol. Days Select the days of the week that the selected user can access the Internet. Time Set the start and end time of day that the selected user can access the Internet. Allow/Block Set to allow or block Internet access for the time defined above. Enabled Turn ON or OFF this Parental Control restriction. Time Zone Update the related time information for your location. Local Log You can use either of the following two formats to send your firewall event log notifications: • • Individual e-mail alerts sent out automatically each time the firewall is under attack Local log stored within the gateway and displayed in table form on the Local Log page Figure 55 – Firewall Local Log Screen SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 58 Gateway Configuration Screen Definitions Table 21: Firewall Local Log-Field Descriptions Field Description Contact Email Address Your email address SMTP Server Name Name of the email Simple Mail Transfer Protocol (SMTP) server The firewall page requires the name of your email server for sending a firewall log to your email address. You can obtain the SMTP server name from your service provider. SMTP Username Your user name for your email account. Check with your email service provider. SMTP Password Your user password for your email account. Check with your email service provider. Email Alerts Enable or disable emailing firewall alerts. Remote Log You can send firewall attack reports out to a standard SysLog server, so that many instances can be logged over a long period of time. You can select individual attack or configuration items to send to the SysLog server so that only the items of interest will be monitored. There are four types of Firewall reports that you can monitor and log: • Permitted Connections – Select to notify the server to send you email logs identifying who is connecting to your network. • Blocked Connections – Select to notify the server to send you email logs identifying who was blocked from connecting to your network. • Known Internet Attacks – Select to notify the server to send you email logs of known Internet attacks against your network. • Product Configuration Events – Select to notify the server to send you email logs of the basic product configuration events logs. The SysLog server must be on the same network as the Private LAN behind the Configuration Manager (typically 192.168.0.x). To activate the SysLog monitoring feature, check all desired event types to monitor and enter the last byte of the IP address of the SysLog server. Normally, the IP address of this SysLog server is hard coded so that the address always agrees with the entry on this page. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 59 Gateway Configuration Screen Definitions Figure 56 – Firewall Remote Log Screen Table 22: Firewall Remote Log-Field Descriptions Field Description Permitted Connections Select if you want email notification of who is connecting to your network. Blocked Connections Select if you want email notification of who is blocked from connecting to your network. Known Internet Attacks Select if you want email notification of known Internet attacks against your network. Product Configuration Events Select if you want email notification of the basic product configuration events. to Syslog server at 192.168.0.x Enter the last digit(s) of your SysLog server’s IP address. Possible values: 10 to 254 SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 60 Warranty Information C Warranty Information SURFboard & Touchstone SBG6580 Wireless Cable Modem Gateways ARRIS Enterprises, Inc. (“ARRIS”) Retail Purchasers: If you purchased this Product directly from ARRIS or from an authorized ARRIS retail reseller, ARRIS warrants to you, the original end user customer, that (A) the Product, excluding Software, will be free from defects in materials and workmanship under normal use, and (B) with respect to Software, (i) the media on which the Software is provided will be free from defects in material and workmanship under normal use, and (ii) the Software will perform substantially as described in its documentation. This Limited Warranty to you, the original end user customer, continues (A) for Software and the media upon which it is provided, for a period of ninety (90) days from the date of purchase from ARRIS or an authorized ARRIS reseller, and (B) for the Product (excluding Software), for a period of one (1) year from the date of purchase from ARRIS or from an authorized ARRIS reseller. To take advantage of this Limited Warranty or to obtain technical support, you must call the ARRIS toll-free phone number 1-877-466-8646. Technical support charges may apply. ARRIS’ sole and exclusive obligation under this Limited Warranty for retail sales shall be to repair or replace any Product or Software that does not meet this Limited Warranty. All warranty claims must be made within the applicable Warranty Period. Cable Operator or Service Provider Arrangements. If you did not purchase this Product directly from ARRIS or from a ARRIS authorized retail reseller, ARRIS does not warrant this Product to you, the enduser. A limited warranty for this Product (including Software) may have been provided to your cable operator or Internet Service Provider (“Service Provider”) from whom you obtained the Product. Please contact your Service Provider if you experience problems with this Product. General Information. The warranties described in this Section shall not apply: (i) to any Product subjected to accident, misuse, neglect, alteration, Acts of God, improper handling, improper transport, improper storage, improper use or application, improper installation, improper testing or unauthorized repair; or (ii) to cosmetic problems or defects which result from normal wear and tear under ordinary use, and do not affect the performance or use of the Product. ARRIS’ warranties apply only to a Product that is manufactured by ARRIS and identified by ARRIS owned trademark, trade name or product identification logos affixed to the Product. ARRIS does not warrant to you, the end user, or to anyone else that the Software will perform error free or without bugs. ARRIS IS NOT RESPONSIBLE FOR, AND PROVIDES “AS IS” ANY SOFTWARE SUPPLIED BY 3RD PARTIES. EXCEPT AS EXPRESSLY STATED IN THIS SECTION (“WARRANTY INFORMATION”), THERE ARE NO WARRANTIES OF ANY KIND RELATING TO THE PRODUCT, EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR THE WARRANTY AGAINST INFRINGEMENT PROVIDED IN THE UNIFORM COMMERCIAL CODE. Some states do not allow for the exclusion of implied warranties, so the above exclusion may not apply to you. What additional provisions should I be aware of? Because it is impossible for ARRIS to know the purposes for which you acquired this Product or the uses to which you will put this Product, you assume full responsibility for the selection of the Product for its installation and use. While every reasonable effort has been made to insure that you will receive a Product that you can use and enjoy, ARRIS does not warrant that the functions of the Product will meet your requirements or that the operation of the Product will be uninterrupted or error-free. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 61 Warranty Information ARRIS IS NOT RESPONSIBLE FOR PROBLEMS OR DAMAGE CAUSED BY THE INTERACTION OF THE PRODUCT WITH ANY OTHER SOFTWARE OR HARDWARE. ALL WARRANTIES ARE VOID IF THE PRODUCT IS OPENED, ALTERED, AND/OR DAMAGED. THESE ARE YOUR SOLE AND EXCLUSIVE REMEDIES for any and all claims that you may have arising out of or in connection with this Product, whether made or suffered by you or another person and whether based in contract or tort. IN NO EVENT SHALL ARRIS BE LIABLE TO YOU OR ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION OR ANY OTHER PECUNIARY LOSS), OR FROM ANY BREACH OF WARRANTY, EVEN IF ARRIS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL ARRIS’ LIABILITY EXCEED THE AMOUNT YOU PAID FOR THE PRODUCT. These matters are governed by the laws of the Commonwealth of Pennsylvania, without regard to conflict of laws principles and excluding the provisions of the United Nations Convention on Contracts for the International Sale of Goods. Retail Purchasers Only. If you purchased this Product directly from ARRIS or from a ARRIS authorized retail reseller, please call the ARRIS toll-free number, 1-877-466-8646 for warranty service or technical support. Technical support charges may apply. Cable Operator or Service Provider Arrangements. If you did not purchase this Product directly from ARRIS or from a ARRIS authorized retail reseller, please contact your Service Provider for technical support. SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide 365-095-25397-x.1 62 ARRIS Enterprises, Inc. 3871 Lakefield Drive, Suwanee, GA 30024 www.arrisi.com 365-095-25397 x.1 06/14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Anyta Jackson Category : User Guide Change Log : 1.3 Changed "Motorola, Inc." to "Motorola, LLC"; inserted new Getting Help text; removed Univers Condensed font. 1.2 Revised help text Comments : SBG6580 Wireless Cable Modem Gateway User Guide Company : Motorola Mobility Control : This document is uncontrolled pending incorporation in an ARRIS CMS Create Date : 2014:06:11 15:15:59-04:00 DCM Authors : Anyta Jackson DCM Date : 06/11/2014 DCM Doc Rev : x.1 DCM Document Number : 365-095-25397 DCM Sec Lev : 1 DCM Title : SURFboard SBG6580 Wireless Cable Modem Gateway, User Guide Date Completed : D:20140606 Document Number : 365-095-25397 Document Revision : x.1 Keywords : cable modem gateway, DOCSIS 3.0 Modify Date : 2014:06:19 08:38:12-07:00 Release Number : Change in Release Number custom property Replaces Release : Change in Replaces Release custom property Security Level : 1 Source Modified : D:20140611191510 Status : Draft Subject : SURFboard® SBG6580 Template Version : IO_ARRIS_01.14.2014 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2014:06:19 08:38:12-07:00 Creator Tool : Acrobat PDFMaker 10.1 for Word Document ID : uuid:e9d6620c-30fa-4d04-96fd-ea6696f3bb88 Instance ID : uuid:227505eb-74c9-4bf7-9cfa-72d902ab6344 Format : application/pdf Title : Wireless Cable Modem Gateway Description : SURFboard® SBG6580 Creator : Anyta Jackson Producer : Adobe PDF Library 10.0 Document 0020number : 365-095-25397 Document 0020revision : x.1 Date 0020completed : D:20140606 Template 0020version : IO_ARRIS_01.14.2014 Security 0020level : 1 Release 0020number : Change in Release Number custom property Replaces 0020release : Change in Replaces Release custom property Change 0020log : 1.3 Changed "Motorola, Inc." to "Motorola, LLC"; inserted new Getting Help text; removed Univers Condensed font. 1.2 Revised help text Headline : SURFboard® SBG6580 Page Layout : SinglePage Page Mode : UseOutlines Page Count : 74EXIF Metadata provided by EXIF.tools