Motorola V 3600 Users Manual V.3600 Modem User's Guide

2015-01-23

• Title Page
• Copyright
  • Trademarks
  • Notice
  • Updates
• Regulatory Information
  • FCC Fax Branding Requirements
  • FCC Part 15 Declaration Of Conformity
    • FOR HOME OR OFFICE USE Model Name: V.3600, 115 VAC version only
    • Shielded Cables
    • FOR OFFICE USE ONLY Model Name: V.3600, all other versions
    • Shielded Cables
  • Special Requirements For Canada
    • Industry Canada (IC) Requirements
    • Ringer Equivalence Number
    • CANADIAN EMISSION REQUIREMENTS (V.3600, 115 Vac)
    • CANADIAN EMISSION REQUIREMENTS (V.3600, other versions)
• Contents
• Chapter 1 Introduction
  • Shelf-Mount Units
  • Features
    • Data Mode
    • Fax Mode
  • Software
    • Communications Software
    • Class 1 Fax Communications Software
    • Internet Browser
  • Description
    • Functional
    • Physical
    • RM16M Unit
• Chapter 2 Installation
  • Electrical Installation
    • AC Power Connection
    • DC Power Connection
  • DTE Connection
  • Telephone Line Connection
    • Dial Mode: PSTN Connection (DIAL jack)
    • Leased Line Connection (TELSET/LEASED LINE Jack)
  • Shelf-Mount RM16M V.3600 Installation
• Chapter 3 Getting Started
  • Option Selection
  • Power-Up
  • Placing a Call
    • Dialing with a Standard Telephone
    • Autodialing from Front Panel
    • Autodialing from a Terminal with the AT Commands
  • Answering a Call
    • Autoanswering
    • Answering Manually
    • Answering from Terminal with AT Command Set
  • Ending a Call
    • Ending a Call Using the Front Panel
    • Ending a Call from a Terminal with the AT Command Set
    • Reasons for Call Termination
• Chapter 4 Front Panel Operation
  • LED Descriptions
  • LCD Menus
  • LCD Menu Operation
  • Front Panel Security
• Chapter 5 AT Commands
  • Command Categories
  • Operation Modes
    • Offline Command Mode
    • Online Command Mode
    • Data Mode
  • Sending Commands to the Modem
    • Creating a Command Statement — AT
    • Autobaud
    • Guidelines for Creating Command Statements
    • Monitor Display
    • Command Statement Buffer
    • Backspace Key
    • Repeating a Command — A/
    • Numbered Commands
    • Group Commands
  • Response Commands
    • Digit / Word Selection — V
    • Response Displays — Q
    • Negotiation Displays — W
    • Connect Message Codes — \V
    • Call Progress / Connect Speed Messages X
    • Number Code Application — *RC
    • Response Number Codes / Messages
  • Dial Commands
    • Dialing — D
    • Tone Dialing — T
    • Pulse Dialing — P
    • Insert Long Pause — ,
    • Wait for Second Dial Tone — W
    • Hook Flash — !
    • Switching to Answer Mode after Dialing — R
    • Remaining in Command Mode — ;
    • Wait for 5 Seconds of Silence — @
    • Dialing a Stored Telephone Number — Sn
    • Autodial Number Location — *AUn
    • Voice Calls
    • Switching from Voice to Data
  • Answering A Call
    • Manual Answer
    • AT Command Answer — A
    • Autoanswer — S0
    • Caller ID — *ID
    • Distinctive Ring — *DR
  • Terminal Interface Commands
    • Data Carrier Detect — &C
    • Data Set Ready — &S
    • Data Terminal Ready — &D
    • Serial Port Ring Indicator (Pin 22) — \R
    • Request to Send / Clear to Send — &R
    • DTE Controlled Fallback Rate (Pin 23) — *FB
  • General Commands
    • Changing from Data Mode to Command Mode — +++
    • Local Character Echo — E
    • Online Character Echo — F
    • Hanging Up — H, H1
    • Fast Disconnect — H2, H3
    • EPROM Check — I
    • Speaker Volume L
    • Speaker Control — M
    • Return Online — O
    • Long Space Disconnect — Y
    • V.22 bis Guard Tones — &G
    • Asynchronous / Synchronous Mode Selection — &M
    • Make / Break Dial Pulse Ratio — &P
    • Synchronous Transmit Clock Source — &X
    • V.34 Rate Selection Thresholds — *TH
    • V.34 Asymmetric Bit Rates — *AS
    • Modulation *MM
    • Maximum DCE Speed — %B
    • Minimum DCE Speed — %L
    • Auto Retrain — %E
    • Automatic Rate Adaption — %R
    • Manual Rate Adaption — *RR
    • Product Revision Level %V
    • Online Quick Reference — $H
    • Product Serial Number — $V
    • Talk / Data — *DA
    • V.32 Fast Train — *FT
    • Incoming Call — *IC
    • Line Current Disconnect — *LC
    • Disable AT Command Set — *NT
    • Dial Line Transmit Level — *TDn
  • Private Line Operation
    • 4-Wire Operation
    • 2-Wire Operation
      • 2-Wire Leased Line Operation
      • 2-Wire Dial-up Operation:
    • Dial Backup
    • Dial / Leased Line — &L
    • Dial Backup *DB
    • Return to Leased Line from Dial Backup — *LB
    • Manual Dial Backup — *LD
    • Answer / Originate — *OR
    • Leased Line Transmit Level — *TLn
  • Configuration Commands
  • Configuration Profiles
    • Active Profile
    • Stored Profile
    • Factory Profile
    • Storing a Configuration — &W
    • Powerup Option Set — &Y
    • Load Factory Options — &Fn
    • Reset to Stored Configuration — Z
    • View Configuration Profiles/Received Signal Options &V
    • Storing a Telephone Command Line — &Zx=n, *CNx,n, *ND
    • Retaining / Restoring Options — *RO
    • Soft Download Password — %P1, $Y
  • Remote Configuration
    • Remote Configuration Security
    • Remote Security Code — %P=
    • Entering Remote Configuration — %T=, &T
    • Enabling/Disabling Remote Configuration — *RA
    • Remote Configuration DTE Speed — *RB
    • Remote Configuration Format — *RF
    • Remote Configuration Saving or Discarding Options — *RQ
• Chapter 6 Protocols
  • CCITT V.42 bis Error Control Protocol
  • Reliable Mode
  • Auto-Reliable Mode
  • Constant Speed Interface
  • Data Compression
  • Normal Mode
  • Direct Mode
  • Flow Control
  • Protocol Commands
    • Disconnect Buffer Delay — Q%D
    • Serial Port (DTE) Constant Speed — \J
    • V.42 Optional Detection Phase — \M
    • Operating Mode — \N
    • Auto-Reliable Fallback Character — %An
    • Serial Port Flow Control — \Q
    • XON/XOFF Pass Through — \X
    • Data Link Flow Control — \G
    • Break Control — \Kn
    • Inactivity Timer — \T
    • Maximum Reliable Block Size — \A
    • Transmit Break / Set Break Length — \B
    • Set Auto-Reliable Buffer — \C
    • V.42bis Data Compression — %C
• Chapter 7 Test Mode Operation
  • Test Categories
  • Terminating a Test in Progress — Q&T
  • Testing the Local Modem
    • Local Analog Loopback — &T1
    • Local Analog Loopback with Self Test — &T8
  • Testing the Remote Modem
    • Local Digital Loopback — &T3
    • Grant/Deny RDL Request — &T4, &T5
    • Remote Digital Loopback — &T6
    • Remote Digital Loopback with Self Test — &T7
    • Test Pattern — %T
    • Bilateral Digital Test Enable / Disable — *DG
    • DTE Controlled Remote Digital Loopback (Pin 21) — *RD
    • DTE Controlled Local Analog Loopback (Pin 18) *LA
• Chapter 8 Security
  • Autocallback Security
  • Low Security Operation
    • Operating without Low Security
    • Operating with Low Security
    • Remote Operation
    • Local Operation
    • Passwords
    • LCD Indication of Security
    • Restrictions in Security Operation
  • Low Security Commands
    • Set Password — $S=x
    • Changing a Password — $C=x, y
    • Deleting a Password — $C=x, -
    • Security Reset — $DR
    • Disabling Security — $D=x
    • Security Status — $D?, $E?
    • Enabling Security — $E=x
  • High Security
    • Compatibility
    • Capacity
    • Operating without High Security
    • Operating with High Security
  • Security Levels
    • Level 1: Password Only
    • Level 2: Password with Callback
    • Level 3: Password with Callback and Password Re-Entry
  • Superuser
    • Passwords
    • Default Passwords
  • High Security Commands
    • Enabling High Security — $EH=pw
    • Disabling High Security — $D
    • Setting Passwords — $Pn=pw$pw
    • Set Security Levels — $Ln=m
    • Set User Callback Number — $Cn=m
    • Extended Features — $W
      • $W1
      • $W2
      • $W0
    • Display Extended Feature Status — $W?
    • Display/Reset Illegal Access Attempt Counters — $M, $Mn, $M*
    • Factory Reset — $F=pw$pw
    • Removing a User — $Rn
    • Security Status — $E?
    • Display User Status — $S?
    • Verify User Information — $In, $IBn
    • Request Superuser Privilege — $S=pw
    • Local Logon Command — $n=pw
    • Local Logoff Command — $$
    • Remote Logon Procedure — $n=pw
• Chapter 9 Fax Operation
  • Fax Operation
  • Modem Initialization
  • Fax Defaults
    • Fax Autoanswer
  • Fax Associated Options
    • Stored Fax Profile
  • Class 1 Details
  • Class 1 Commands
    • Dial Command — D
      • AT Responses to the ATD Command
    • Answer Command — A
    • On Hook — H
    • Off Hook — H1
    • Class 0 Operation — +FCLASS=0
    • Class 1 Operation — +FCLASS=1
    • Service Class Indication — +FCLASS?
    • Service Class Capabilities — +FCLASS=?
    • Transmit Silence — +FTS=(Time)
    • Receive Silence — +FRS=(Time)
    • Fax Transmit and Receive Modes
    • Facsimile Transmit — +FTM=(Mod)
    • Facsimile Receive — +FRM=(Mod)
    • HDLC Transmit — +FTH=(Mod)
    • HDLC Receive — +FRH=(Mod)
    • Test Supported Range of Values — +FTx=?, +FRx=?
    • Class 1 Result Code — +FCERROR
    • Fax Autoanswer — +FAA=
    • DTE Autobaud for Fax Autoanswer — *FR
  • Binary File Transfer
• Chapter 10 Status Registers
  • S-Registers
  • S-Register Operation — Sn?, Sn?^
    • Changing Register Values — Sn=v, Sn=^v
    • Individual Bit Command — Sn . # =v
    • Autoanswer — S0
    • Ring Count — S1
    • Escape Character — S2
    • End-of-Line Character — S3
    • Line-Feed Character — S4
    • Backspace Character — S5
    • Pause Before Dialing — S6
    • Pause for Ringback and Carrier Detection / Wait for 2nd Dial Tone — S7
    • Pause Interval for Comma — S8
    • Carrier Detect Time — S9
    • Lost Carrier Detect Time — S10
    • DTMF Tone Duration — S11
    • Escape Sequence Pause — S12
    • S13
    • Bit Mapped — S14
    • S15
    • System Tests — S16
    • S17
    • Test Timeout — S18
    • S19, 20
    • Bit Mapped — S21
    • Bit Mapped — S22
    • Bit Mapped — S23
    • S24
    • DTR State Recognition — S25
    • RTS/CTS Delay — S26
    • Bit Mapped — S27
    • Lookback Timer — S28
    • Bit Mapped — S29
    • Bit Mapped — S30
    • S31
    • Bit Mapped — S32
    • S33
    • Bit Mapped — S34
    • DTR / Dial Backup Number to Dial — S35
    • S36-S40
    • Remote Configuration Escape Character — S41
    • Remote Configuration Guard Time — S42
    • S43
    • XON Character from DTE — S44
    • XOFF Character from DTE — S45
    • S46-48
    • XON Character to DTE — S49
    • XOFF Character to DTE — S50
    • Dial Line Transmit Level — S51
    • Leased Line Transmit Level — S52
    • Automatic Rate Adaption Threshold — S53
    • Flow Control — S54
    • S55
    • V.42 Compression Control — S56
    • Bit Mapped — S57
    • Inactivity Timer — S58
    • Break Control — S59
    • Bit Mapped — S60
    • DTE Options — S61
    • Disconnect Buffer Delay — S62
    • Maximum Transmit Block Size — S63
    • Auto-Reliable Fallback Character — S64
    • S65-66
    • Link Speed Status — S67
    • S68
    • DCE Independent Speed — S69
    • Operating Mode — S70
    • Operating Mode Status — S71
    • Bit Mapped — S72
    • Password Timeout — S73
    • Callback Delay — S74
    • Callback Retry — S75
    • Callback Retry Delay — S76
    • Lockout Threshold — S77
    • Autocallback Timer — S78
    • Break Length — S79
    • Serial Port or DTE Speed — S80
    • Minimum DCE Speed — S81
    • Negotiation Status — S82
    • S83
    • Bit Mapped — S84
    • S85-S87
    • Modulation Type S88
    • S89-S90
    • Current Modulation S91
    • S92 - S94
    • V.34 Settings — S95
    • V.34 Asymmetric Settings — S96
    • Bit Mapped — S97
    • S98- S100
• Chapter 11 V.25 bis Autodialer
  • Autodialer Command Strings and Parameters
  • Software Guidelines
    • Invalid Responses
  • Dial Parameters
  • V.25 bis Commands and Responses
    • Dial Command — CRN nn...n
    • Program Number Command — PRN a;nn...n
    • Intermediate Call Progress Response
    • Dial Stored Number — CRS a
    • Request List of Stored Numbers — RLN
    • Disregard Incoming Call — DIC
    • Connect Incoming Call — CIC
    • Redial Last Number — CRR n
    • Link Number by Address — PRL a;b
    • Request List of Delayed Numbers — RLD
    • If there is no response to the RLD command, there are no numbers on the delayed call list.
    • For numbers on the delayed call list, the response structure is as follows:
    • Request List of Linked Numbers — RLL
    • Request List of Version — RLV
    • Modem Options Command — PRO xxx;yy;0;0...
    • Save Current Settings — PRK
    • Restore Factory Settings — PRP n
    • Request List of Stored Options — RLO xxx; yy
  • Options
• Chapter 12 Maintenance
  • General
  • Fuse Replacement
  • Maintenance
  • Calling Technical Support
• Appendix A Specifications
  • Size
  • Environmental Conditions
  • Power Requirements
  • Telephone Line
  • Digital Interface
  • Modem Data Rates
  • Fax Rates
  • Modulations
  • Fax Modulation
  • Internal Transmit Clock Frequency
  • External Transmit Clock Frequency
  • Transmit Output Level
  • Operation
  • Carrier Detect Level
  • Telco Connection
  • Testing
  • Line Equalization
  • RTS/CTS Delay
  • Link Layer Protocols
• Appendix B Phone Jack Descriptions
  • DIAL Pin Functions
  • TELSET/LEASED LINE Pin Functions
• Appendix C Hardware Options
  • Jumper Option Selection
  • Removing the Cover
    • Ground Option Jumper
  • Replacing the Cover
• Appendix D Fault Isolation Procedure
  • Fault Isolation Procedure
    • Telephone Interface
    • Standard Phone
  • Modem and Telephone Line Check
    • Part I
    • Part II
• Appendix E Command Index and Defaults
  • General
    • Caller ID Commands
    • Distinctive Ring Commands
    • Fax Commands
    • Class 1 Commands Valid in Only Fax Mode
    • Security Commands
    • Remote Configuration Commands
  • Status Registers
  • V.25 bis Dialer Commands
    • V.25 Response Messages
  • Factory Option Sets
    • Factory Option Set #1
    • Factory Option Set # 2
    • Factory Option Set #3
    • Factory Option Set # 4
    • Factory Option Set #5
    • Factory Option Set # 6
    • Factory Option Set # 7
    • Factory Option Set # 8
    • Factory Option Set #9
• Appendix F ASCII and EBCDIC Characters
• Appendix H Flash Upgrade
  • What You Need
  • Steps For Downloading
  • Troubleshooting
• Appendix I Country-Specific Parameters
  • Introduction
    • Questions About Product Shipment or Technical Assistance
    • To Access the Motorola ING Internet Web Pages
    • Sales-Related Issues
    • Information on Product Training
    • Questions About Billing
    • Comments About the Guide
    • To Order Additional Motorola ING User Documentation
    • Two Year Limited Hardware Warranty
    • What This Warranty Does Not Cover
    • General Provisions
• Service and Support
• Motorola Limited Hardware Warranty
• Index