Msi Ph61A P35 B3 Owner S Manual

2014-07-06

: Msi Msi-Ph61A-P35-B3-Owner-S-Manual msi-ph61a-p35-b3-owner-s-manual msi pdf

Open the PDF directly: View PDF PDF.
Page Count: 62

PH61A-P35 (B3)/
PH61-P33 (B3)/
PH61-SP35 (B3)
seres
MS-7732 (v1.x) Manboard
G52-77321X1

Preface
MS-7732
Preface
Preface
MS-7732
Preface
Copyrght Notce
The materal n ths document s the ntellectual property of MICRO-STAR INTERNA-
TIONAL. We take every care n the preparaton of ths document, but no guarantee s
gven as to the correctness of ts contents. Our products are under contnual mprove-
ment and we reserve the rght to make changes wthout notce.
Trademarks
All trademarks n ths manual are propertes of ther respectve owners.
MSI® s regstered trademark of Mcro-Star Int’l Co.,Ltd.
NVIDIA® s regstered trademark of NVIDIA Corporaton.
ATI® s regstered trademark of AMD Corporaton.
AMD® s regstered trademarks of AMD Corporaton.
Intel® s regstered trademarks of Intel Corporaton.
Wndows® s regstered trademarks of Mcrosoft Corporaton.
AMI® s regstered trademark of Amercan Megatrends Inc.
Award® s a regstered trademark of Phoenx Technologes Ltd.
Sound Blaster® s regstered trademark of Creatve Technology Ltd.
Realtek® s regstered trademark of Realtek Semconductor Corporaton.
JMcron® s regstered trademark of JMcron Technology Corporaton.
Netware® s a regstered trademark of Novell, Inc.
Lucd® s trademarks of LucdLogx Technologes, Ltd.
VIA® s regstered trademark of VIA Technologes, Inc.
ASMeda® s regstered trademark of ASMeda Technology Inc.
Pad, Phone, and Pod are trademarks of Apple Inc.
Revson Hstory
Revson Revson Hstory Date
V1.0 Frst release for PCB 1.X 2011/04
Techncal Support
If a problem arses wth your system and no soluton can be obtaned from the user’s
manual, please contact your place of purchase or local dstrbutor. Alternatvely, please
try the followng help resources for further gudance.
Vst the MSI webste for techncal gude, BIOS updates, drver updates, and
other nformaton:
http://www.ms.com/servce/download
Contact our techncal sta at:
http://support.ms.com
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
◙
◙
Preface
MS-7732
Preface

Preface
MS-7732
Preface
Safety Instructons
Always read the safety nstructons carefully.
Keep ths User’s Manual for future reference.
Keep ths equpment away from humdty.
Lay ths equpment on a relable at surface before settng t up.
The openngs on the enclosure are for ar convecton hence protects the equpment
from overheatng. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source s at 110/220V before connectng the
equpment to the power nlet.
Place the power cord such a way that people can not step on t. Do not place any-
thng over the power cord.
Always Unplug the Power Cord before nsertng any add-on card or module.
All cautons and warnngs on the equpment should be noted.
Never pour any lqud nto the openng that can cause damage or cause electrcal
shock.
If any of the followng stuatons arses, get the equpment checked by servce
personnel:
The power cord or plug s damaged.
Lqud has penetrated nto the equpment.
The equpment has been exposed to mosture.
The equpment does not work well or you can not get t work accordng to User’s
Manual.
The equpment has been dropped and damaged.
The equpment has obvous sgn of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60oC (140oF),
IT MAY DAMAGE THE EQUIPMENT.
CAUTION: There s a rsk of exploson, f battery s ncorrectly replaced.
Replace only wth the same or equvalent type recommended by the manufacturer.
警告使用者:
這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情況下，
使用者會被要求採取某些適當的對策。
廢電池請回收
For better envronmental protecton, waste batteres should be
collected separately for recyclng specal dsposal.
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
◯
◯
◯
◯
◯
◯
v
Preface
MS-7732
Preface
Preface
MS-7732
Preface
FCC-B Rado Frequency Interference Statement
Ths equpment has been tested and found
to comply wth the lmts for a Class B dg-
tal devce, pursuant to Part 15 of the FCC
Rules. These lmts are desgned to provde
reasonable protecton aganst harmful nter-
ference n a resdental nstallaton. Ths equpment generates, uses and can radate
rado frequency energy and, f not nstalled and used n accordance wth the nstruc-
tons, may cause harmful nterference to rado communcatons. However, there s no
guarantee that nterference wll not occur n a partcular nstallaton. If ths equpment
does cause harmful nterference to rado or televson recepton, whch can be deter-
mned by turnng the equpment o and on, the user s encouraged to try to correct the
nterference by one or more of the measures lsted below.
Reorent or relocate the recevng antenna.
Increase the separaton between the equpment and recever.
Connect the equpment nto an outlet on a crcut derent from that to whch the
recever s connected.
Consult the dealer or an experenced rado/televson techncan for help.
Notce 1
The changes or modcatons not expressly approved by the party responsble for com-
plance could vod the user’s authorty to operate the equpment.
Notce 2
Shelded nterface cables and A.C. power cord, f any, must be used n order to comply
wth the emsson lmts.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
◯
◯
◯
◯
Ths devce comples wth Part 15 of the FCC Rules. Operaton s subject to the follow-
ng two condtons:
ths devce may not cause harmful nterference, and
ths devce must accept any nterference receved, ncludng nterference that may
cause undesred operaton.
1)
2)
Mcro-Star Internatonal
MS-7732
Preface
MS-7732
Preface
v
Preface
MS-7732
Preface
WEEE (Waste Electrcal and Electronc Equpment) Statement
ENGLISH
To protect the global envronment and as an envronmentalst, MSI must re-
mnd you that...
Under the European Unon (“EU”) Drectve on Waste Electrcal and Electron-
c Equpment, Drectve 2002/96/EC, whch takes eect on August 13, 2005,
products of “electrcal and electronc equpment” cannot be dscarded as mu-
ncpal wastes anymore, and manufacturers of covered electronc equpment
wll be oblgated to take back such products at the end of ther useful lfe. MSI wll com-
ply wth the product take back requrements at the end of lfe of MSI-branded products
that are sold nto the EU. You can return these products to local collecton ponts.
DEUTSCH
Hnwes von MSI zur Erhaltung und Schutz unserer Umwelt
Gemäß der Rchtlne 2002/96/EG über Elektro- und Elektronk-Altgeräte dürfen Elek-
tro- und Elektronk-Altgeräte ncht mehr als kommunale Abfälle entsorgt werden. MSI
hat europawet verschedene Sammel- und Recyclngunternehmen beauftragt, de n
de Europäsche Unon n Verkehr gebrachten Produkte, am Ende senes Lebenszyklus
zurückzunehmen. Btte entsorgen Se deses Produkt zum gegebenen Zetpunkt aus-
schlesslch an ener lokalen Altgerätesammelstelle n Ihrer Nähe.
FRANÇAIS
En tant qu’écologste et an de protéger l’envronnement, MSI tent à rappeler cec...
Au sujet de la drectve européenne (EU) relatve aux déchets des équpement élec-
trques et électronques, drectve 2002/96/EC, prenant eet le 13 août 2005, que les
produts électrques et électronques ne peuvent être déposés dans les décharges ou
tout smplement ms à la poubelle. Les fabrcants de ces équpements seront oblgés de
récupérer certans produts en n de ve. MSI prendra en compte cette exgence relatve
au retour des produts en n de ve au sen de la communauté européenne. Par con-
séquent vous pouvez retourner localement ces matérels dans les ponts de collecte.
РУССКИЙ
Компания MSI предпринимает активные действия по защите окружающей среды,
поэтому напоминаем вам, что....
В соответствии с директивой Европейского Союза (ЕС) по предотвращению
загрязнения окружающей среды использованным электрическим и электронным
оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13
августа 2005 года, изделия, относящиеся к электрическому и электронному
оборудованию, не могут рассматриваться как бытовой мусор, поэтому
производители вышеперечисленного электронного оборудования обязаны
принимать его для переработки по окончании срока службы. MSI обязуется
соблюдать требования по приему продукции, проданной под маркой MSI на
территории EC, в переработку по окончании срока службы. Вы можете вернуть
эти изделия в специализированные пункты приема.
v
Preface
MS-7732
Preface
Preface
MS-7732
Preface
ESPAÑOL
MSI como empresa comprometda con la proteccón del medo ambente, recomenda:
Bajo la drectva 2002/96/EC de la Unón Europea en matera de desechos y/o equ-
pos electróncos, con fecha de rgor desde el 13 de agosto de 2005, los productos
clascados como “eléctrcos y equpos electróncos” no pueden ser depostados en
los contenedores habtuales de su muncpo, los fabrcantes de equpos electróncos,
están oblgados a hacerse cargo de dchos productos al termno de su período de vda.
MSI estará comprometdo con los térmnos de recogda de sus productos venddos en
la Unón Europea al nal de su perodo de vda. Usted debe depostar estos productos
en el punto lmpo establecdo por el ayuntamento de su localdad o entregar a una
empresa autorzada para la recogda de estos resduos.
NEDERLANDS
Om het mleu te beschermen, wl MSI u eraan hernneren dat….
De rchtljn van de Europese Une (EU) met betrekkng tot Vervulng van Electrsche
en Electronsche producten (2002/96/EC), de op 13 Augustus 2005 n zal gaan kun-
nen net meer beschouwd worden als vervulng. Fabrkanten van dt soort producten
worden verplcht om producten retour te nemen aan het end van hun levenscyclus.
MSI zal overeenkomstg de rchtljn handelen voor de producten de de merknaam MSI
dragen en verkocht zjn n de EU. Deze goederen kunnen geretourneerd worden op
lokale nzamelngspunten.
SRPSKI
Da b zašttl prrodnu srednu, kao preduzeće koje vod računa o okoln prrodnoj
sredn, MSI mora da vas podest da…
Po Drektv Evropske unje (“EU”) o odbačenoj ekektronskoj elektrčnoj oprem, D-
rektva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, prozvod koj spadaju
pod “elektronsku elektrčnu opremu” ne mogu vše bt odbačen kao občan otpad
prozvođač ove opreme bće prnuđen da uzmu natrag ove prozvode na kraju njhovog
uobčajenog veka trajanja. MSI će poštovat zahtev o preuzmanju ovakvh prozvoda
kojma je stekao vek trajanja, koj maju MSI oznaku koj su prodat u EU. Ove proz-
vode možete vratt na lokalnm mestma za prkupljanje.
POLSKI
Aby chronć nasze środowsko naturalne oraz jako rma dbająca o ekologę, MSI przy-
pomna, że...
Zgodne z Dyrektywą Un Europejskej (“UE”) dotyczącą odpadów produktów elektry-
cznych elektroncznych (Dyrektywa 2002/96/EC), która wchodz w życe 13 serpna
2005, tzw. “produkty oraz wyposażene elektryczne  elektronczne “ ne mogą być trak-
towane jako śmec komunalne, tak węc producenc tych produktów będą zobowązan
do odberana ch w momence gdy produkt jest wycofywany z użyca. MSI wypełn
wymagana UE, przyjmując produkty (sprzedawane na terene Un Europejskej) wy-
cofywane z użyca. Produkty MSI będze można zwracać w wyznaczonych punktach
zborczych.
Preface
MS-7732
Preface
v
Preface
MS-7732
Preface
TÜRKÇE
Çevrec özellğyle blnen MSI dünyada çevrey korumak çn hatırlatır:
Avrupa Brlğ (AB) Kararnames Elektrk ve Elektronk Malzeme Atığı, 2002/96/EC
Kararnames altında 13 Ağustos 2005 tarhnden tbaren geçerl olmak üzere, elektrkl
ve elektronk malzemeler dğer atıklar gb çöpe atılamayacak ve bu elektonk chazların
üretcler, chazların kullanım süreler bttkten sonra ürünler ger toplamakla yükümlü
olacaktır. Avrupa Brlğ’ne satılan MSI markalı ürünlern kullanım süreler bttğnde MSI
ürünlern ger alınması steğ le şbrlğ çersnde olacaktır. Ürünlernz yerel toplama
noktalarına bırakablrsnz.
ČESKY
Záleží nám na ochraně žvotního prostředí - společnost MSI upozorňuje...
Podle směrnce Evropské une (“EU”) o lkvdac elektrckých a elektronckých výrobků
2002/96/EC platné od 13. srpna 2005 je zakázáno lkvdovat “elektrcké a elektroncké
výrobky” v běžném komunálním odpadu a výrobc elektronckých výrobků, na které se
tato směrnce vztahuje, budou povnn odebírat takové výrobky zpět po skončení je-
jch žvotnost. Společnost MSI splní požadavky na odebírání výrobků značky MSI,
prodávaných v zemích EU, po skončení jejch žvotnost. Tyto výrobky můžete odevzdat
v místních sběrnách.
MAGYAR
Annak érdekében, hogy környezetünket megvédjük, lletve környezetvédőként fellépve
az MSI emlékeztet Önt, hogy ...
Az Európa Unó („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elek-
tronkus berendezések hulladékaról szóló 2002/96/EK rányelve szernt az elektromos
és elektronkus berendezések többé nem kezelhetőek lakosság hulladékként, és az
lyen elektronkus berendezések gyártó kötelessé válnak az lyen termékek vsszavé-
telére azok hasznos élettartama végén. Az MSI betartja a termékvsszavétellel kapc-
solatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek
esetében, azok élettartamának végén. Az lyen termékeket a legközelebb gyűjtőhelyre
vhet.
ITALIANO
Per proteggere l’ambente, MSI, da sempre amca della natura, t rcorda che….
In base alla Drettva dell’Unone Europea (EU) sullo Smaltmento de Materal Elettrc
ed Elettronc, Drettva 2002/96/EC n vgore dal 13 Agosto 2005, prodott appartenent
alla categora de Materal Elettrc ed Elettronc non possono pù essere elmnat come
rut muncpal: produttor d dett materal saranno obblgat a rtrare ogn prodotto
alla ne del suo cclo d vta. MSI s adeguerà a tale Drettva rtrando tutt prodott
marchat MSI che sono stat vendut all’nterno dell’Unone Europea alla ne del loro
cclo d vta. È possble portare  prodott nel pù vcno punto d raccolta
v
Preface
MS-7732
Preface
Preface
MS-7732
Preface
CONTENTS
▍
Copyrght Notce ............................................................................................ 
Trademarks .................................................................................................... 
Revson Hstory............................................................................................. 
Techncal Support.......................................................................................... 
Safety Instructons .........................................................................................
FCC-B Rado Frequency Interference Statement.......................................... v
WEEE (Waste Electrcal and Electronc Equpment) Statement .................... v
Chapter 1 Gettng Started............................................................................1-1
Manboard Speccatons ..................................................................................... 1-2
Manboard Layout ................................................................................................ 1-4
Packng Contents ................................................................................................. 1-5
Optonal Accessores ........................................................................................... 1-5
Chapter 2 Hardware Setup ..........................................................................2-1
Quck Components Gude .................................................................................... 2-2
Mountng Screw Holes .........................................................................................2-3
CPU (Central Processng Unt) ............................................................................ 2-4
Memory ................................................................................................................2-8
Power Supply ..................................................................................................... 2-10
Back Panel ......................................................................................................... 2-11
Connectors .........................................................................................................2-13
Jumper ...............................................................................................................2-19
Slots ...................................................................................................................2-20
Chapter 3 BIOS Setup .................................................................................3-1
Enterng Setup ..................................................................................................... 3-2
The Menu Bar ...................................................................................................... 3-4
Man Menu ........................................................................................................... 3-5
Advanced .............................................................................................................3-6
Overclockng ...................................................................................................... 3-12
M-Flash ..............................................................................................................3-17
Securty ..............................................................................................................3-18
Boot .................................................................................................................... 3-19
Save & Ext .........................................................................................................3-20
Preface
MS-7732
Preface
x
Preface
MS-7732
Preface
Appendx A Realtek Audo .......................................................................... A-1
Installng the Realtek HD Audo Drver .................................................................A-2
Software Conguraton .........................................................................................A-3
Hardware Default Settng .....................................................................................A-5
Thank you for choosng the PH61A-P35 (B3)/ PH61-
P33 (B3)/ PH61-SP35 (B3) Seres (MS-7732 v1.X) ATX
manboard. These Seres manboards are based on Intel®
H61 chpsets for optmal system ecency. Desgned to
t the advanced Intel® LGA1155 processor, these Seres
delver a hgh performance and professonal desktop
platform soluton.
Chapter 1
Gettng Started
1-2
Gettng Started
Manboard Speccatons
Processor Support
Intel® CoreTM 7/ CoreTM 5 /CoreTM 3/ Pentum®/ Celeron® processor n the LGA1155
package
(For the latest nformaton about CPU, please vst
http://www.ms.com/servce/cpu-support)
Chpset
Intel® H61 chpset
Memory Support
2 DDR3 DIMMs support DDR3 1333/ 1066 DRAM (16GB Max)
Supports Dual-Channel mode
(For more nformaton on compatble components, please vst
http://www.ms.com/servce/test-report)
LAN
Supports LAN 10/100/1000 by Realtek® RTL8111E
Audo
HD audo codec ntegrated by Realtek® ALC887
Flexble 8-channel audo wth jack sensng
SATA
4 SATA 3Gb/s (SATA1~4) ports by Intel® H61 PCH (PH61A-P35 (B3)/ PH61-P33
(B3))
2 SATA 3Gb/s (SATA1~2) ports by Intel® H61 PCH (PH61-SP35 (B3))
2 SATA 6Gb/s (SATA5~6) ports ASMeda® ASM1061 (PH61A-P35 (B3))
USB 3.0 (PH61A-P35 (B3))
2 USB 3.0 rear IO ports by ASMeda® ASM1042
Connectors
Back panel
1 PS/2 keyboard port
1 PS/2 mouse port
2 USB 3.0 ports (PH61A-P35 (B3))
4 USB 2.0 ports (PH61A-P35 (B3)/ PH61-SP35 (B3))
6 USB 2.0 ports (PH61-P33 (B3))
1 VGA port*
1 DVI-D port* (PH61A-P35 (B3)/ PH61-SP35 (B3))
1 LAN port
6 exble audo ports (PH61A-P35 (B3)/ PH61-P33 (B3))
3 exble audo ports** (PH61-SP35 (B3))
*(The VGA & DVI-D ports only work wth Integrated Graphcs Processor)
**(If the manboard, whch equps 3 audo jacks, wants to reach the 8-channel sound
eect, the 7th and 8th channels must be output from front panel.)
■
■
■
■
■
■
■
■
■
■
■
■-
-
-
-
-
-
-
-
-
-
1-3
MS-7732
Chapter 1
On-Board
2 USB 2.0 connectors (PH61A-P35 (B3)/ PH61-P33 (B3)
1 USB 2.0 connectors (PH61-SP35 (B3))
1 Chasss Intruson connector
1 S/PDIF-Out connector
1 Front Panel Audo connector
1 TPM Module connector (PH61A-P35 (B3)/ PH61-P33 (B3))
1 Seral port connector
1 Parallel port connector
Slots
1 PCIE x16 slot
2 PCIE x1 slots
3 PCI slots
Form Factor
ATX (30.5 cm X 20.5 cm)
Mountng Screw Holes
6 mountng screw holes
■-
-
-
-
-
-
-
-
■
■
■
■
■
1-4
Gettng Started
PH61A-P35 (B3)/ PH61-P33 (B3)/ PH61-SP35 (B3) Seres
(MS-7732 v1.X) ATX Manboard
Manboard Layout
PCI 1
PCI 2
PCI 3
PCI _E3
DIMM1
DIMM2
PCI _E2
PCI _E1
BATT
+
JUSB1 JUSB2 JFP2 JFP1
SATA5
SATA6
SATA3SATA1
SATA4SATA2
JTPM1 JCOM1
SYSFAN3
SYSFAN4
SYSFAN2
SYSFAN1
CPUFAN
JCI1
ASM
1061
JBAT1
JPWR1
JPWR2
JSP1
JAUD1
Top : mouse
Bottom:
keyboard
Top: LAN Jack
Bottom: USB 2.0 ports
USB 2.0 ports
USB 2.0 ports/
USB 3.0 ports
(Optional)
(Optional)
(Optional)
(Optional) (Optional)
(Optional)
USB 3.0 Chip
LAN Chip
Audio
codce
Top : VGA port
Bottom: DVI-D port
Intel
H61
T:Line-In
M:Line-Out
B:Mic
T:RS-Out
M:CS-Out
B:SS-Out
(Optional)
JLPT1
1-5
MS-7732
Chapter 1
Packng Contents
* These pctures are for reference only and may vary wthout notce.
* The packng contents may vary accordng to the model you purchased.
* If you need to purchase the optonal accessores, please vst http://www.ms.com/n-
dex.php to nqure the part numbers or consult the dealer.
Manboard Drver / Utlty
DVD User Gude Back IO Sheld
SATA Cable
SATA Power
Cable
Optonal Accessores
Ths chapter provdes you wth the nformaton about
hardware setup procedures. Whle performng the nstal-
laton, be careful n holdng the components and follow-
ng the nstallaton procedures. For some components, f
you nstall n the wrong orentaton, the components wll
not work properly.
Use a grounded wrst strap before handlng computer
components. Statc electrcty may damage the compo-
nents.
Chapter 2
Hardware Setup
2-2
Hardware Setup
MS-7732
Chapter 2
Hardware Setup
MS-7732
Chapter 2
Quck Components Gude
Back Panel,
p.2-11
CPU, p.2-4
CPUFAN1, p.2-14
DDR3, p.2-8
JPWR2, p.2-10
PCIE, p.2-20
SYSFAN1, p.2-14
SYSFAN2/4, p.2-14
JAUD1, p.2-15
JSP1, p.2-16
JTPM1, p.2-17
JCI1, p.2-18
JBAT1, p.2-19
JUSB1~2, p.2-15
JFP1/ JFP2, p.2-14
SATA, p.2-13
JPWR1, p.2-10
JCOM1, p.2-16
JLPT1, p.2-18
SATA3SATA1
SATA4SATA2
PCIE, p.2-20
SYSFAN3, p.2-14
Hardware Setup
MS-7732
Chapter 2
2-3
Hardware Setup
MS-7732
Chapter 2
Mountng Screw Holes
When you nstall the manboard, you have to place the manboard nto the chasss n the
correct drecton. The locatons of screws holes on the manboard are shown as below.
Refer above pcture to nstall standos n the approprate locatons on chasss and then
screw through the manboard screw holes nto the standos.
Important
To prevent damage to the manboard, any contact between the manboard crcut and
chasss or unnecessary standos mounted on the chasss s prohbted.
Please make sure there are no metal components placed on the manboard or wthn
the chasss that may cause short crcut of the manboard.
•
•
Screw holes
The sde has to to-
ward the rear, the
poston for the I/O
sheld of the chasss.
SATA3S ATA1
SATA4S ATA2
2-4
Hardware Setup
MS-7732
Chapter 2
Hardware Setup
MS-7732
Chapter 2
CPU (Central Processng Unt)
When you are nstallng the CPU, make sure to nstall the cooler to prevent overheatng.
If you do not have the CPU cooler, consult your dealer before turnng on the computer.
For the latest nformaton about CPU, please vst
http://www.ms.com/servce/cpu-support
Important
Overheatng
Overheatng wll serously damage the CPU and system. Always make sure the coolng
fan can work properly to protect the CPU from overheatng. Make sure that you apply
an even layer of thermal paste (or thermal tape) between the CPU and the heatsnk to
enhance heat dsspaton.
Replacng the CPU
Whle replacng the CPU, always turn o the ATX power supply or unplug the power
supply’s power cord from the grounded outlet rst to ensure the safety of CPU.
Overclockng
Ths manboard s desgned to support overclockng. However, please make sure your
components are able to tolerate such abnormal settng, whle dong overclockng. Any
attempt to operate beyond product speccatons s not recommended. We do not guar-
antee the damages or rsks caused by nadequate operaton or beyond product spec-
catons.
Introducton to LGA 1155 CPU
The surface of LGA 1155 CPU. Remember to apply some thermal paste on t for
better heat dsperson.
Algnment Key
Yellow trangle s the
Pn 1 ndcator
Algnment Key
Hardware Setup
MS-7732
Chapter 2
2-5
Hardware Setup
MS-7732
Chapter 2
CPU & Cooler Installaton
When you are nstallng the CPU, make sure the CPU has a cooler attached on the top
to prevent overheatng. Meanwhle, do not forget to apply some thermal paste on CPU
before nstallng the heat snk/cooler fan for better heat dsperson.
Follow the steps below to nstall the CPU & cooler correctly. Wrong nstallaton wll
cause the damage of your CPU & manboard.
The CPU socket has a plastc cap on
t to protect the contact from damage.
Before you nstall CPU, always cover
t to protect the socket pn. Remove
the cap (as the arrow shows).
1. Open the load level.
2.
Lft the load lever up to fully open po-
ston.
3. After conrmng the CPU drecton for
correct matng, put down the CPU n
the socket housng frame. Be sure to
grasp on the edge of the CPU base.
Note that the algnment keys are
matched.
4.
Algnment Key
2-6
Hardware Setup
MS-7732
Chapter 2
Hardware Setup
MS-7732
Chapter 2
Important
Conrm f your CPU cooler s rmly nstalled before turnng on your system.
Do not touch the CPU socket pns to avod damagng.
•
•
Algnment Key
Vsually nspect f the CPU s seated
well nto the socket. If not, take out
the CPU wth pure vertcal moton
and renstall.
5. Engage the load lever whle pressng
down lghtly onto the load plate.
6.
Secure the lever near the hook end
under the retenton tab.
7. Make sure the four hooks are n
proper poston before you nstall the
cooler.
8.
Hardware Setup
MS-7732
Chapter 2
2-7
Hardware Setup
MS-7732
Chapter 2
Manboard
Hook
Important
Read the CPU status n BIOS.
Whenever CPU s not nstalled, always protect your CPU socket pn wth the plastc
cap covered (shown n Fgure 1) to avod damagng.
Manboard photos shown n ths secton are for demonstraton of the CPU/ cooler n-
stallaton only. The appearance of your manboard may vary dependng on the model
you purchase.
Please refer to the documentaton n the CPU fan package for more detals about the
CPU fan nstallaton.
•
•
•
•
Algn the holes on the manboard wth
the heatsnk. Push down the cooler
untl ts four clps get wedged nto the
holes of the manboard.
9. Press the four hooks down to fasten
the cooler.
10.
Turn over the manboard to conrm
that the clp-ends are correctly n-
serted.
11. Fnally, attach the CPU Fan cable to
the CPU fan connector on the man-
board.
12.
2-8
Hardware Setup
MS-7732
Chapter 2
Hardware Setup
MS-7732
Chapter 2
Memory
These DIMM slots are used for nstallng memory modules. For more nformaton on
compatble components, please vst http://www.ms.com/servce/test-report
DDR3
240-pn, 1.5V
48x2=96 pn 72x2=144 pn
Dual-Channel mode Populaton Rule
In Dual-Channel mode, the memory modules can transmt and receve data wth two
data bus lnes smultaneously. Enablng Dual-Channel mode can enhance the system
performance. The followng llustratons explan the populaton rules for Dual-Channel
mode.
DIMM1
DIMM2
Important
DDR3 memory modules are not nterchangeable wth DDR2, and the DDR3 standard
s not backwards compatble. You should always nstall DDR3 memory modules n
the DDR3 DIMM slots.
In Dual-Channel mode, make sure that you nstall memory modules of the same type
and densty n derent channel DIMM slots.
Due to the chpset resource deployment, the system densty wll only be detected up
to 15+GB (not full 16GB) when each DIMM s nstalled wth a 8GB memory module.
•
•
•
Installed
Empty
Hardware Setup
MS-7732
Chapter 2
2-9
Hardware Setup
MS-7732
Chapter 2
Installng Memory Modules
The memory module has only one notch on the center and wll only t n the rght
orentaton.
Insert the memory module vertcally nto the DIMM slot. Then push t n untl the
golden nger on the memory module s deeply nserted n the DIMM slot. The plastc
clp at each sde of the DIMM slot wll automatcally close when the memory module
s properly seated.
Manually check f the memory module has been locked n place by the DIMM slot
clps at the sdes.
Notch
Volt
Important
You can barely see the golden nger f the memory module s properly nserted n the
DIMM slot.
1.
2.
3.
2-10
Hardware Setup
MS-7732
Chapter 2
Hardware Setup
MS-7732
Chapter 2
Power Supply
ATX 24-pn Power Connector: JPWR1
Ths connector allows you to connect an ATX 24-pn power supply. To connect the ATX
24-pn power supply, make sure the plug of the power supply s nserted n the proper
orentaton and the pns are algned. Then push down the power supply rmly nto the
connector.
You may use the 20-pn ATX power supply as you lke. If you’d lke to use the 20-pn
ATX power supply, please plug your power supply along wth pn 1 & pn 13.
13.+3.3V
1.+3.3V
14.-12V
2.+3.3V
15.Ground
3.Ground
16.PS-ON#
4.+5V17.Ground
5.Ground
18.Ground
6.+5V
19.Ground
7.Ground
22.+5V
10.+12V
20.Res
8.PWR OK
23.+5V
11.+12V
21.+5V
9.5VSB
24.Ground
12.+3.3V
ATX 4-pn Power Connector: JPWR2
Ths connector s used to provde the power output to the CPU.
4.+12V
2.Ground
3.+12V
1.Ground
Important
Make sure that all the connectors are connected to proper ATX power supples to en-
sure stable operaton of the manboard.
Hardware Setup
MS-7732
Chapter 2
2-11
Hardware Setup
MS-7732
Chapter 2
Back Panel
Mouse/Keyboard
The standard PS/2® mouse/keyboard DIN connector s for a PS/2® mouse/keyboard.
USB 2.0 Port
The USB 2.0 port s for attachng USB devces such as keyboard, mouse, or other USB-
compatble devces.
USB 3.0 Port (optonal)
USB 3.0 port s backward-compatble wth USB 2.0 devces. Supports data transfer rate
up to 5 Gbt/s (SuperSpeed).
Important
If you want to use a USB 3.0 devce, you must use the USB 3.0 cable to connect to the
USB 3.0 port.
VGA Port
The DB15-pn female connector s provded for montor.
DVI-D Port (optonal)
The DVI-D (Dgtal Vsual Interface - Dgtal) connector allows you to connect a LCD
montor. It provdes a hgh-speed dgtal nterconnecton between the computer and ts
dsplay devce. To connect an LCD montor, smply plug your montor cable nto the DVI
-D connector, and make sure that the other end of the cable s properly connected to
your montor (refer to your montor manual for more nformaton.)
Important
The VGA and DVI-D dsplay nterfaces on the manboard are desgned to serve as IGP
(Integrated Graphcs Processor) used. If you nstalled a processor wthout ntegrated
graphcs chp, these dsplay ports wll have no eect.
▶
▶
▶
▶
▶
Lne-In
Lne-Out
Mc
VGA Port
USB 3.0 Port (PH61A-P35 (B3))
or USB 2.0 Port (PH61-P33 (B3))
DVI-D Port
RS-Out
CS-Out
SS-Out
Mouse
USB 2.0 Port
USB 2.0 Port
LAN
(optonal)
Keyboard
(optonal)
(optonal)
2-12
Hardware Setup
MS-7732
Chapter 2
Hardware Setup
MS-7732
Chapter 2
LAN
The standard RJ-45 LAN jack s for connecton to
the Local Area Network (LAN). You can connect a
network cable to t.
LED Color LED State Condton
Left Yellow O LAN lnk s not establshed.
On(Steady state) LAN lnk s establshed.
On(brghter & pulsng) The computer s communcatng wth another computer on the LAN.
Rght Green O 10 Mbt/sec data rate s selected.
On 100 Mbt/sec data rate s selected.
Orange On 1000 Mbt/sec data rate s selected.
Audo Ports
These audo connectors are used for audo devces. It s easy to derentate between
audo eects accordng to the color of audo jacks.
Lne-In: Blue - Lne In, s used for external CD player, tape-player or other audo
devces.
Lne-Out: Green - Lne Out, s a connector for speakers or headphones.
Mc: Pnk - Mc, s a connector for mcrophones.
RS-Out (optonal): Black - Rear-Surround Out n 4/ 5.1/ 7.1 channel mode.
CS-Out (optonal): Orange - Center/ Subwoofer Out n 5.1/ 7.1 channel mode.
SS-Out (optonal): Gray - Sde-Surround Out 7.1 channel mode.
▶
▶
■
■
■
■
■
■
Yellow Green/ Orange
Hardware Setup
MS-7732
Chapter 2
2-13
Hardware Setup
MS-7732
Chapter 2
Connectors
Seral ATA Connector: SATA1~6 (SATA3~6 are optonal)
Ths connector s a hgh-speed Seral ATA nterface port. Each connector can connect
to one Seral ATA devce.
* The MB layout n ths gure s for reference only.
SATA1~4 (3Gb/s, by H61)
SATA5~6 (6Gb/s, by ASM1061)
SATA2
SATA1
SATA4
SATA3
SATA6
SATA5
Important
Please do not fold the Seral ATA cable nto a 90-degree angle. Otherwse, data loss
may occur durng transmsson.
2-14
Hardware Setup
MS-7732
Chapter 2
Hardware Setup
MS-7732
Chapter 2
Fan Power Connectors: CPUFAN,SYSFAN1~4
The fan power connectors support system coolng fan wth +12V. When connectng the
wre to the connectors, always note that the red wre s the postve and should be con-
nected to the +12V; the black wre s Ground and should be connected to GND. If the
manboard has a System Hardware Montor chpset on-board, you must use a specally
desgned fan wth speed sensor to take advantage of the CPU fan control.
1.Ground
2.+12V
3.Sensor
4.Control
CPUFAN SYSFAN1~4
Important
Please refer to the recommended CPU fans at processor’s ocal webste or consult
the vendors for proper CPU coolng fan.
CPUFAN support Smart fan control. You can nstall Control Center utlty that wll
automatcally control the CPUFAN speeds accordng to the actual CPUFAN tem-
peratures.
Fan cooler set wth 3 or 4 pns power connector are both avalable for CPUFAN.
Front Panel Connectors: JFP1, JFP2
These connectors are for electrcal connecton to the front panel swtches and LEDs.
The JFP1 s complant wth Intel® Front Panel I/O Connectvty Desgn Gude.
1.Ground
3.Suspend LED
5.Power LED
7.No Pin
8.+
6.-
4.+
2.-
Buzzer
Speaker
1.+
3.-
10.No Pin
5.-Reset Switch
HDD LED
Power Switch
Power LED
7.+
9.Reserved
8.-
6.+
4.-
2.+
JFP1 JFP2
•
•
•
Hardware Setup
MS-7732
Chapter 2
2-15
Hardware Setup
MS-7732
Chapter 2
Front USB Connector: JUSB1~2 (JUSB2 s optonal)
Ths connector, complant wth Intel® I/O Connectvty Desgn Gude, s deal for con-
nectng hgh-speed USB nterface perpherals such as USB HDD, dgtal cameras, MP3
players, prnters, modems and the lke.
115V
1.VCC
3.USB0-
10.NC
5.USB0+
7.Ground
9.No Pin
8.Ground
6.USB1+
4.USB1-
2.VCC
* The MB layout n ths gure s for reference only.
USB Bracket (optonal)
Important
Note that the pns of VCC and GND must be connected correctly to avod possble
damage.
Front Panel Audo Connector: JAUD1
Ths connector allows you to connect the front panel audo and s complant wth Intel®
Front Panel I/O Connectvty Desgn Gude.
1.MIC L
3.MIC R
10.Head Phone Detection
5.Head Phone R
7.SENSE_SEND
9.Head Phone L
8.No Pin
6.MIC Detection
4.NC
2.Ground
2-16
Hardware Setup
MS-7732
Chapter 2
Hardware Setup
MS-7732
Chapter 2
S/PDIF-Out Connector: JSP1
Ths connector s used to connect S/PDIF (Sony & Phlps Dgtal Interconnect Format)
nterface for dgtal audo transmsson.
115V
3.VCC
2.SPDIF
1.Ground
* The MB layout n ths gure s for reference only.
S/PDIF-Out Bracket (optonal)
Seral Port Connector: JCOM1
Ths connector s a 16550A hgh speed communcaton port that sends/receves 16
bytes FIFOs. You can attach a seral devce.
1.DCD
3.SOUT
10.No Pin
5.Ground
7.RTS
9.RI
8.CTS
6.DSR
4.DTR
2.SIN
Hardware Setup
MS-7732
Chapter 2
2-17
Hardware Setup
MS-7732
Chapter 2
TPM Module connector: JTPM1 (optonal)
Ths connector connects to a TPM (Trusted Platform Module) module (optonal). Please
refer to the TPM securty platform manual for more detals and usages.
10.No Pin
14.Ground
8.5V Power
12.Ground
6.Serial IRQ
4.3.3V Power
2.3V Standby power1.LPC Clock
3.LPC Reset
5.LPC address & data pin0
7.LPC address & data pin1
9.LPC address & data pin2
11.LPC address & data pin3
13.LPC Frame
2-18
Hardware Setup
MS-7732
Chapter 2
Hardware Setup
MS-7732
Chapter 2
Parallel Port Connector: JLPT1
Ths connector s used to connect an optonal parallel port bracket. The parallel port s a
standard prnter port that supports Enhanced Parallel Port (EPP) and Extended Capa-
bltes Parallel Port (ECP) mode.
10.Ground
14.Ground
8.LPT_SLIN#
12.Ground
6.PINIT#
4.ERR#
2.AFD#
24.Ground
22.Ground
26.No Pin
20.Ground
18.Ground
16.Ground
1.RSTB#
3.PRND0
5.PRND1
7.PRND2
9.PRND3
11.PRND4
13.PRND5
15.PRND6
17.PRND7
19.ACK#
21.BUSY
23.PE
25.SLCT
Chasss Intruson Connector: JCI1
Ths connector connects to the chasss ntruson swtch cable. If the chasss s opened,
the chasss ntruson mechansm wll be actvated. The system wll record ths status
and show a warnng message on the screen. To clear the warnng, you must enter the
BIOS utlty and clear the record.
1.CINTRU
2.Ground
Hardware Setup
MS-7732
Chapter 2
2-19
Hardware Setup
MS-7732
Chapter 2
Jumper
Clear CMOS Jumper: JBAT1
There s a CMOS RAM on board wth an external battery power supply to preserve the
system conguraton data. Wth the CMOS RAM, the system can automatcally boot
OS every tme t s turned on. If you want to clear the system conguraton, please
temporarly short these two pns to clear data by usng a metal object.
Important
You can clear CMOS by touchng two pns once wth a metal object whle the system s
o. Avod clearng the CMOS whle the system s on; t wll damage the manboard.
Keep Data Clear Data
(Use a metal object to
temporarly short these
two pns.)
2-20
Hardware Setup
MS-7732
Chapter 2
Slots
PCIE (Perpheral Component Interconnect Express) Slot
The PCIE slot supports the PCIE nterface expanson card.
PCIE x16 Slot
PCIE x1 Slot
PCI (Perpheral Component Interconnect) Slot
The PCI slot supports LAN card, SCSI card, USB card, and other add-on cards that
comply wth PCI speccatons.
32-bt PCI Slot
Important
When addng or removng expanson cards, make sure that you unplug the power sup-
ply rst. Read the documentaton for the expanson card to congure any necessary
hardware or software settngs, such as jumpers, swtches or BIOS conguraton.
PCI Interrupt Request Routng
IRQ, or nterrupt request lne, are hardware lnes over whch devces can send nterrupt
sgnals to the mcroprocessor. The PCI IRQ pns are typcally connected to the PCI bus
pns as follows:
Order1 Order2 Order3 Order4
PCI Slot 1 INT A# INT B# INT C# INT D#
PCI Slot 2 INT B# INT C# INT D# INT A#
PCI Slot 3 INT C# INT D# INT A# INT B#
Ths chapter provdes nformaton on the BIOS Setup
program and allows you to congure the system for op-
tmum use.
You may need to run the Setup program when:
An error message appears on the screen durng
the system bootng up, and requests you to run
SETUP.
You want to change the default settngs for cus-
tomzed features.
■
■
Chapter 3
BIOS Setup
3-2
BIOS Setup
MS-7732
Chapter 3
BIOS Setup
MS-7732
Chapter 3
Enterng Setup
Power on the computer and the system wll start POST (Power On Self Test) process.
When the message below appears on the screen, press <DEL> key to enter Setup.
Press DEL to enter Setup Menu, F11 to enter Boot Menu
If the message dsappears before you respond and you stll wsh to enter Setup, restart
the system by turnng t OFF and On or pressng the RESET button. You may also re-
start the system by smultaneously pressng <Ctrl>, <Alt>, and <Delete> keys.
Important
The tems under each BIOS category descrbed n ths chapter are under contnuous
update for better system performance. Therefore, the descrpton may be slghtly df-
ferent from the latest BIOS and should be held for reference only.
Upon boot-up, the 1st lne appearng after the memory count s the BIOS verson. It s
usually n the format:
E7732IMS.xxx 022811 where:
1st dgt refers to BIOS type as E = EFI
2nd - 5th dgt refers to the model number.
6th dgt refers to the chpset as I = Intel, N = nVda, A = AMD and V = VIA.
7th - 8th dgt refers to the customer as MS = all standard customers.
xxx refers to the BIOS verson.
022811 refers to the date ths BIOS was released.
•
•
BIOS Setup
MS-7732
Chapter 3
3-3
BIOS Setup
MS-7732
Chapter 3
Control Keys
<↑><↓> Select Item
<←><→> Select Screen
<Enter> Select
<Esc> Jumps to the Ext menu or returns to the man menu from a submenu
<+><-> Change Opton
<F1> General Help
<F6> Load Optmzed Defaults
<F10> Save all the CMOS changes and ext
Gettng Help
After enterng the Setup menu, the rst menu you wll see s the Man Menu.
Man Menu
The man menu lsts the setup functons you can make changes to. You can use the
arrow keys ( ↑↓ ) to select the tem. The on-lne descrpton of the hghlghted setup
functon s dsplayed at the bottom of the screen.
Sub-Menu
If you nd a rght ponter symbol (as shown n the rght vew) appears to the left of certan
elds that means a sub-menu can be launched from ths eld. A sub-menu contans
addtonal optons for a eld parameter. You can use arrow keys ( ↑↓ ) to hghlght the
eld and press <Enter> to call up the sub-menu. Then you can use the control keys to
enter values and move from eld to eld wthn a sub-menu. If you want to return to the
man menu, just press the <Esc >.
General Help <F1>
The BIOS setup program provdes a General Help screen. You can call up ths screen
from any menu by smply pressng <F1>. The Help screen lsts the approprate keys to
use and the possble selectons for the hghlghted tem. Press <Esc> to ext the Help
screen.
3-4
BIOS Setup
MS-7732
Chapter 3
BIOS Setup
MS-7732
Chapter 3
The Menu Bar
Man Menu
Use ths menu for basc system conguratons, such as tme, date etc.
Advanced
Use ths menu to setup the tems of the BIOS specal enhanced features, ntegrated
perpherals, power management and PC health status.
Overclockng
Use ths menu to specfy your settngs for frequency/voltage control and overclockng.
M-Flash
Use ths menu to read/ ash the BIOS from storage drve (FAT/ FAT32 format only).
Securty
Use ths menu to set supervsor and user passwords.
Boot
Use ths menu to specfy the prorty of boot devces.
Save & Ext
Ths menu allows you to load the BIOS default values or factory default settngs nto the
BIOS and ext the BIOS setup utlty wth or wthout changes.
▶
▶
▶
▶
▶
▶
▶
BIOS Setup
MS-7732
Chapter 3
3-5
BIOS Setup
MS-7732
Chapter 3
Man Menu
System Date
Ths allows you to set the system to the date that you want (usually the current date).
The format s <day><month> <date> <year>.
[day] Day of the week, from Sun to Sat, determned by BIOS. Read-
only.
[month] The month from Jan. through Dec.
[date] The date from 1 to 31 can be keyed by numerc functon keys.
[year] The year can be adjusted by users.
System Tme
Ths allows you to set the system tme that you want (usually the current tme). The tme
format s <hour> <mnute> <second>.
SATA Port1~6
Press <Enter> to enter the sub-menu. The sub-menu shows the nformaton of nstalled
SATA devce.
Important
SATA Port1~6 are appearng when you connect the HD devces to the SATA connec-
tors on the manboard.
System Informaton
Ths area shows the CPU nformaton, BIOS verson and memory status of your system
(read only).
▶
▶
▶
▶
3-6
BIOS Setup
MS-7732
Chapter 3
BIOS Setup
MS-7732
Chapter 3
Advanced
PCI Subsystem Settngs
Press <Enter> to enter the sub-menu.
PCI Latency Tmer
Ths tem controls how long each PCI devce can hold the bus before another takes
over. When set to hgher values, every PCI devce can conduct transactons for a
longer tme and thus mprove the eectve PCI bandwdth. For better PCI perfor-
mance, you should set the tem to hgher values.
ACPI Settngs
Press <Enter> to enter the sub-menu.
ACPI Standby State
Ths tem speces the power savng modes for ACPI functon.
Power LED
Ths tem congures how the system uses power LED on the case to ndcate the
sleep/suspend state.
▶
▶
▶
▶
▶
BIOS Setup
MS-7732
Chapter 3
3-7
BIOS Setup
MS-7732
Chapter 3
Integrated Perpherals
Press <Enter> to enter the sub-menu.
Onboard Lan Controller
Ths tem allows you to enable/ dsable the onboard LAN controller.
LAN Opton ROM
Ths tem s used to decde whether to nvoke the Boot ROM of the onboard LAN.
SATA Mode
Ths tem s used to specfy the mode for SATA port.
External SATA 6GB/s Controller Mode
Ths tem s used to specfy the mode for SATA 6Gb/s port.
HD Audo Controller
Ths tem allows you to enable/ dsable the HD audo controller.
HPET
The HPET (Hgh Precson Event Tmers) s a component that s part of the chpset.
You can to enable t, and wll provde you wth the means to get to t va the varous
ACPI methods.
On-Chp VGA Devces
Press <Enter> to enter the sub-menu.
Intate Graphc Adapter
Ths settng speces whch graphc card s the ntal graphcs adapter.
Integrated Graphcs Share Memory
The system shares memory to the onboard graphc. Ths settng controls the exact
memory sze shared to the onboard graphc.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
3-8
BIOS Setup
MS-7732
Chapter 3
BIOS Setup
MS-7732
Chapter 3
DVMT Memory
Specfy the sze of DVMT memory to allocate for vdeo memory.
IGD Mult-Montor
When “Enabled”, the ntegrated graphcs and extra graphcs card can be congured
as mult-montor mode.
USB Conguraton
Press <Enter> to enter the sub-menu.
USB Devces:
Ths tem shows the type of nstalled USB devce.
USB Controller
Ths tem allows you to enable/ dsable the onchp USB controller.
Legacy USB Support
Select [Enabled] f you need to use a USB2.0-nterfaced devce n the operatng
system.
Onboard USB 3.0 Controller
Ths tem allows you to enable/ dsable the onboard USB 3.0 controller.
USB3.0 Legacy mode Support
Select [Enabled] f you need to use a USB3.0-nterfaced devce n the operatng
system.
Super IO Conguraton
Press <Enter> to enter the sub-menu.
Seral (COM) Port 0 Conguraton
Press <Enter> to enter the sub-menu.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
BIOS Setup
MS-7732
Chapter 3
3-9
BIOS Setup
MS-7732
Chapter 3
Seral (COM) Port0
Ths tem allows you to enable/ dsable the seral port.
Seral (COM) Port0 Settngs
Select an address and correspondng nterrupt for the seral port.
Parallel (LPT) Port Conguraton
Press <Enter> to enter the sub-menu.
Parallel (LPT) Port
Ths tem allows you to enable/ dsable the parallel port.
Parallel (LPT) Port Settngs
Select an address and correspondng nterrupt for the seral port.
Devce Mode
Select a devce mode for parallel port.
Hardware Montor
Press <Enter> to enter the sub-menu.
CPU Smart Fan Target
The Smart Fan functon controls the CPU fan speed automatcally dependng on the
current temperature to keep t wth n a specc range. You can enable a fan target
value here. If the current CPU fan temperature reaches to the target value, the smart
fan functon wll be actvated.
SYS Fan 1 Control/ SYS Fan2 Control
These tems allow users to select how percentage of speed for the SYSFAN1/ SYS-
FAN2.
▶
▶
▶
▶
▶
▶
▶
▶
▶
3-10
BIOS Setup
MS-7732
Chapter 3
BIOS Setup
MS-7732
Chapter 3
CPU/ System Temperature, CPU FAN/ SYS FAN 1/ 2 Speed, CPU Vcore Voltage,
CPU IO Voltage, DRAM Voltage, GPU Voltage, 3.3V, 5V, 12V
These tems show the current status of all of the montored hardware devces/com-
ponents such as CPU voltage, temperatures and all fans’ speeds.
Power Management Setup
Press <Enter> to enter the sub-menu.
EuP 2013
Ths tem s desgned for energy usng products lot 6 2013 (EuP) aka energy related
products (ErP); to reduce power consumpton durng system o or standby mode.
Note: Enablng EuP 2013 wll dsable support for RTC Wake Up Event.
Restore after AC Power Loss
Ths tem speces whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[Power O] Always leaves the computer n the power o state.
[Power On] Always leaves the computer n the power on state.
[Last State] Restore the system to the status before power falure or nterrupt
occurred.
CPU Phase Control
Ths tem allows you to select the power phase mode to reach the best power savng
functon.
Wake Up Event Setup
Press <Enter> to enter the sub-menu.
Wake Up Event By
Settng to [BIOS] actvates the followng elds, and use the followng elds to set the
wake up events. Settng to [OS], the wake up events wll be dened by OS.
Resume By RTC Alarm
The eld s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
▶
▶
▶
▶
▶
▶
▶
▶
BIOS Setup
MS-7732
Chapter 3
3-11
BIOS Setup
MS-7732
Chapter 3
Date/ HH:MM:SS
If Resume By RTC Alarm s set to [Enabled], the system wll automatcally resume
(boot up) on a specc date/hour/mnute/second speced n these elds (usng the
<+> and <-> to select the date & tme settngs).
Resume By PCI or PCI-E Devce
The tem allows the actvty of the PCI/ PCI-E devce to wake up the system.
Resume From S3 by USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus-
pend to RAM) sleep state.
Resume From S3/S4/S5 by PS/2 Mouse/ KB
These tems determne whether the system wll be awakened from S3/S4/S5 state
when nput sgnal of the PS/2 mouse/ keyboard s detected.
▶
▶
▶
▶
3-12
BIOS Setup
MS-7732
Chapter 3
BIOS Setup
MS-7732
Chapter 3
Overclockng
Current CPU / DRAM Frequency
These tems show the current clocks of CPU and Memory speed. Read-only.
Adjust CPU Rato
Ths tem controls the multpler that s used to determne the nternal clock speed of the
processor relatve to the external or motherboard clock speed. It s avalable only when
the processor supports ths functon.
Adjusted CPU Frequency
It shows the adjusted CPU frequency. Read-only.
Internal PLL Overvoltage
Ths tem are used to adjust the PLL voltage.
EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of
the mcroprocessor whether the computer s runnng on battery or AC power. Ths eld
wll appear after you nstalled the CPU whch supports speedstep technology.
Intel Turbo Booster
Ths tem wll appear when you nstall a CPU wth Intel Turbo Boost technology. Ths
tem s used to enable/ dsable Intel Turbo Boost technology. It can scale processor
frequency hgher dynamcally when applcatons demand more performance and TDP
headroom exsts. It also can delver seamless power scalablty (Dynamcally scale up,
Speed-Step Down). It s the Intel newly technology wthn newly CPU.
▶
▶
▶
▶
▶
▶
BIOS Setup
MS-7732
Chapter 3
3-13
BIOS Setup
MS-7732
Chapter 3
OC Gene Button Operaton
Ths eld s used to enable/ dsable OC Gene functon.
DRAM Frequency
Ths settng controls the memory frequency to enable the memory to run at derent
frequency combnatons.
Adjusted DRAM Frequency
It shows the adjusted DRAM frequency. Read-only.
DRAM Tmng Mode
Select whether DRAM tmng s controlled by the SPD (Seral Presence Detect) EE-
PROM on the DRAM module. Settng to [Auto] enables DRAM tmngs and the followng
“Advanced DRAM Conguraton” sub-menu to be determned by BIOS based on the
conguratons on the SPD. Selectng [Lnk] or [Unlnk] allows users to congure the
DRAM tmngs and the followng related “Advanced DRAM Conguraton” sub-menu
manually.
Advanced DRAM Conguraton
Press <Enter> to enter the sub-menu.
Command Rate
Ths settng controls the DRAM command rate.
tCL
Ths controls the CAS latency, whch determnes the tmng delay (n clock cycles)
before SDRAM starts a read command after recevng t.
tRCD
When DRAM s refreshed, both rows and columns are addressed separately. Ths
setup tem allows you to determne the tmng of the transton from RAS (row ad-
dress strobe) to CAS (column address strobe). The less the clock cycles, the faster
the DRAM performance.
tRP
Ths settng controls the number of cycles for Row Address Strobe (RAS) to be
allowed to precharge. If nsucent tme s allowed for the RAS to accumulate ts
charge before DRAM refresh, refreshng may be ncomplete and DRAM may fal
to retan data. Ths tem apples only when synchronous DRAM s nstalled n the
system.
▶
▶
▶
▶
▶
▶
▶
▶
▶
3-14
BIOS Setup
MS-7732
Chapter 3
BIOS Setup
MS-7732
Chapter 3
tRAS
Ths settng determnes the tme RAS takes to read from and wrte to memory cell.
tRFC
Ths settng determnes the tme RFC takes to read from and wrte to a memory
cell.
tWR
Mnmum tme nterval between end of wrte data burst and the start of a precharge
command. Allows sense amplers to restore data to cells.
tWTR
Mnmum tme nterval between the end of wrte data burst and the start of a col-
umn-read command. It allows I/O gatng to overdrve sense amplers before read
command starts.
tRRD
Speces the actve-to-actve delay of derent banks.
tRTP
Tme nterval between a read and a precharge command.
tFAW
Ths tem s used to set the tFAW (four actvate wndow delay) tmng.
tWCL
Ths tem s used to set the tWCL (Wrte CAS Latency) tmng.
tCKE
Ths tem s used to set the tCKE tmng.
tRTL
Ths tem s used to set the tRTL tmng.
Advanced Channel 1/ 2 Tmng Conguraton
Press <Enter> to enter the sub-menu. And you can set the advanced memory tmng
for each channel.
GT OverClockng
Ths tem allows you to enable/ dsable the overclockng of ntegrated graphcs.
GT Rato
Ths settng controls the rato of ntegrated graphcs frequency to enable the ntegrated
graphcs to run at derent frequency combnatons.
Adjusted GT Frequency
It shows the adjusted ntegrated graphcs frequency. Read-only.
Spread Spectrum
When the manboard’s clock generator pulses, the extreme values (spkes) of the pulses
create EMI (Electromagnetc Interference). The Spread Spectrum functon reduces the
EMI generated by modulatng the pulses so that the spkes of the pulses are reduced
to atter curves.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
BIOS Setup
MS-7732
Chapter 3
3-15
BIOS Setup
MS-7732
Chapter 3
Important
If you do not have any EMI problem, leave the settng at [Dsabled] for optmal system
stablty and performance. But f you are plagued by EMI, select the value of Spread
Spectrum for EMI reducton.
The greater the Spread Spectrum value s, the greater the EMI s reduced, and the
system wll become less stable. For the most sutable Spread Spectrum value, please
consult your local EMI regulaton.
Remember to dsable Spread Spectrum f you are overclockng because even a slght
jtter can ntroduce a temporary boost n clock speed whch may just cause your over-
clocked processor to lock up.
DRAM Voltage
Ths tem s used to adjust the memory voltage.
CPU Features
Press <Enter> to enter the sub-menu.
Actve Processor Cores
Ths tem allows you to select the number of actve processor cores.
Lmt CPUID Maxmum
It s desgned to lmt the lsted speed of the processor to older operatng systems.
Execute Dsable Bt
Intel’s Execute Dsable Bt functonalty can prevent certan classes of malcous
“buer overow” attacks when combned wth a supportng operatng system. Ths
functonalty allows the processor to classfy areas n memory by where applcaton
code can execute and where t cannot. When a malcous worm attempts to nsert
code n the buer, the processor dsables code executon, preventng damage or
worm propagaton.
Intel Vrtualzaton Tech
Ths tem s used to enable/dsable the Intel Vrtualzaton technology. For further
nformaton please refer to Intel’s ocal webste.
Power Technology
Ths tem allows you to select the Intel Dynamc Power technology mode.
C1E Support
To enable ths tem to read the CPU power consumpton whle dle. Not all processors
support Enhanced Halt state (C1E).
•
•
•
▶
▶
▶
▶
▶
▶
▶
▶
3-16
BIOS Setup
MS-7732
Chapter 3
BIOS Setup
MS-7732
Chapter 3
OverSpeed Protecton
Overspeed Protecton functon can montor the current CPU draws as well as ts
power consumpton. If t exceeds a certan level, the processor automatcally reduces
ts clock speed. If you want to overclock your CPU, set t to [Dsabled].
Intel C-State
C-state s a power management state that sgncantly reduces the power of the
processor durng dle. Ths eld wll appear after you nstalled the CPU whch sup-
ports c-state technology.
Package C State lmt
Ths eld allows you to select a C-state lmt.
Long duraton power lmt(W)
Ths eld allows you to adjust the TDP power lmt for the long duraton.
Long duraton mantaned(ms)
Ths eld allows you to adjust the mantanng tme for long duraton power lmt.
Short duraton power lmt(W)
Ths eld allows you to adjust the TDP power lmt for the short duraton.
Prmary/ Secondary plane turbo power lmt (W)
These elds allow you to adjust the TDP lmt for the prmary/ secondary plane tur-
bo.
▶
▶
▶
▶
▶
▶
▶
BIOS Setup
MS-7732
Chapter 3
3-17
BIOS Setup
MS-7732
Chapter 3
M-Flash
BIOS Boot Functon
Ths allows you to enable/ dsable the system to boot from the BIOS le nsde USB
drve (FAT/ 32 format only).
Select UEFI le to boot from
When the BIOS Boot functon as sets to [Enabled], ths tem s selectable. Ths tem
allows to select partcular BIOS le from the USB/ Storage (FAT/ 32 format only) drve.
And the system wll boot from selected BIOS le.
Save current UEFI rom to le
Please setup a specc folder n specc USB/ Storage drve to save BIOS le from
BIOS ROM chp data. Note: t only supports FAT/ 32 le system drve.
Select UEFI le to ash
Ths tem allows you to select partcular BIOS le from the USB/ Storage (FAT/ 32 for-
mat only) drve for updatng BIOS.
▶
▶
▶
▶
3-18
BIOS Setup
MS-7732
Chapter 3
BIOS Setup
MS-7732
Chapter 3
Securty
Admnstrator Password
Ths tem s used to set the admnstrator password. When a admnstrator password
has been set, you wll be prompted to enter t every tme you try to enter BIOS Setup.
User Password
Ths tem s used to set the user password. When a user password has been set, you
wll be prompted to enter t every tme you try to enter the operatng system.
Important
When you select the Admnstrator Password / User Password tem, a password box wll
appear on the screen. Type the password, and press <Enter>. The password typed now
wll replace any prevously set password from CMOS memory. You wll be prompted to
conrm the password. Retype the password and press <Enter>. You may also press
<Esc> to abort the selecton and not enter a password.
To clear a set password, just press <Enter> when you are prompted to enter the pass-
word. A message wll show up conrmng the password wll be dsabled. Once the
password s dsabled, the system wll boot and you can enter Setup/ OS wthout enter-
ng any password.
These two tems prevent an unauthorzed person from changng any part of your system
conguraton.
Chasss Intruson Conguraton
Press <Enter> to enter the sub-menu.
Chasss Intruson
Ths tem enables or dsables the feature of recordng the chasss ntruson status
and ssung a warnng message f the chasss s once opened. To clear the warnng
message, set the eld to [Reset]. The settng of the eld wll automatcally return to
[Enabled] later.
▶
▶
▶
▶
BIOS Setup
MS-7732
Chapter 3
3-19
BIOS Setup
MS-7732
Chapter 3
Boot
Full Screen Logo Dsplay
Ths tem enables ths system to show the company logo on the boot-up screen. Set-
tngs are:
[Enabled] Shows a stll mage (logo) on the full screen at boot.
[Dsabled] Shows the POST messages at boot.
== Set Boot Prorty ==
1st~8th Boot
You can select the boot prortes n these Boot Opton tems.
Hard Dsk/ USB HardDsk/ UEFI Boot Drve BBS Prortes
Boot Opton
You can select the hard dsk/ USB hard dsk/ UEFI Boot prortes n these Boot Op-
ton tems.
▶
▶
▶
▶
3-20
BIOS Setup
MS-7732
Chapter 3
Save & Ext
Dscard Changes and Ext
Use ths tem to abandon all changes and ext setup.
Save Changes and Reboot
Use ths tem to save changes and reboot the system.
Save Changes
Use ths tem to save changes.
Dscard Changes
Use ths tem to abandon all changes.
Restore Defaults
Use ths tem to load the optmzed default values set by the BIOS vendor.
== Boot Overrde ==
The nstalled storage devces wll appear on ths menu, you can select one of them be
a boot devce.
▶
▶
▶
▶
▶
The Realtek audo provdes 10-channel DAC that smul-
taneously supports 7.1 sound playback and 2 channels
of ndependent stereo sound output (multple streamng)
through the Front-Out-Left and Front-Out-Rght chan-
nels.
Appendx A
Realtek Audo
A-2
Realtek Audo
MS-7732
Appendx A
Realtek Audo
MS-7732
Appendx A
Installng the Realtek HD Audo Drver
You need to nstall the HD audo drver for Realtek audo codec to functon properly
before you can get access to 2-, 4-, 6-, 8- channel or 7.1+2 channel audo operatons.
Follow the procedures descrbed below to nstall the drvers for derent operatng sys-
tems.
Installaton for Wndows®
For Wndows® XP, you must nstall Wndows® XP Servce Pack3 or later before nstallng
the drver.
The followng llustratons are based on Wndows® 7 envronment and could look slghtly
derent f you nstall the drvers n derent operatng systems.
Insert the applcaton DVD nto the DVD-ROM drve. The setup screen wll automat-
cally appear.
Clck Drver tab.
Clck AUDIO button.
1.
2.
3.
Clck here
Select Realtek HD Audo Drvers to start nstallng the drvers.
Clck Next to nstall the Realtek Hgh Denton Audo Drver.
Follow the on-screen nstructons to nstall drvers.
Clck Fnsh to restart the system.
Important
The HD Audo Conguraton software utlty s under contnuous update to enhance au-
do applcatons. Hence, the program screens shown here n ths secton may be slghtly
derent from the latest software utlty and shall be held for reference only.
4.
5.
6.
7.
Realtek Audo
MS-7732
Appendx A
A-3
Realtek Audo
MS-7732
Appendx A
Software Conguraton
After nstallng the audo drver, the “Realtek HD Audo Manager” con wll appear at the
notcaton area (lower rght of the screen). You may double clck the con and the GUI
wll pop up accordngly.
Double clck the con
It s also avalable to enable the audo drver by clckng the Realtek HD Audo Manager
from the Control Panel.
Software panel overvew
The followng gure descrbes the functon of the Realtek HD Audo Manager panel.
Devce Selecton
Volume Adjustment
Applcaton Enhancement
Jack status panel
A-4
Realtek Audo
MS-7732
Appendx A
Realtek Audo
MS-7732
Appendx A
Devce Selecton
Here you can select a audo output source to change the related optons. The “check”
sgn (n orange) ndcates the devces as default.
Volume Adjustment
You can control the volume or balance the rght/left sde of the speakers that you
plugged n front or rear panel by adjust the bar.
Applcaton Enhancement
The array of optons wll provde you a complete gudance of antcpated sound eect for
both output and nput devce.
Jack status panel
Ths panel depcts all render and capture devces currently connected wth your com-
puter.
Auto popup dalog
When you plug nto the devce at the jack, a dalogue wndow wll pop up askng you
whch devce s current connected.
As you know, each jack corresponds to ts default settng, you can refer to the next sec-
ton “Hardware Default Settng”.
■
■
■
■
Realtek Audo
MS-7732
Appendx A
A-5
Realtek Audo
MS-7732
Appendx A
Hardware Default Settng
The followng dagrams are audo back panel default settng.
Backpanel audo jacks to 2-channel speakers dagram
Front
Backpanel audo jacks to 4-channel speakers dagram
Rear
Front
■
■
A-6
Realtek Audo
MS-7732
Appendx A
Backpanel audo jacks to 6-channel speakers dagram
Rear
Front
Center&Subwoofer
Backpanel audo jacks to 8-channel speakers dagram
Rear
Front
Center&Subwoofer
Side Surround
■
■

Navigation menu