Msi Z77A G45 Gaming Owner S Manual
2014-07-06
: Msi Msi-Z77A-G45-Gaming-Owner-S-Manual msi-z77a-g45-gaming-owner-s-manual msi pdf
Open the PDF directly: View PDF 
.
Page Count: 96
| Download | |
| Open PDF In Browser | View PDF |
Z77A-G45 GAMING series MS-7752 (v3.x) Motherboard G52-77521XG Preface Copyright Notice The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks in this manual are properties of their respective owners. ￭ MSI® is registered trademark of Micro-Star Int’l Co.,Ltd. ￭ NVIDIA® is registered trademark of NVIDIA Corporation. ￭ ATI® is registered trademark of AMD Corporation. ￭ AMD® is registered trademarks of AMD Corporation. ￭ Intel® is registered trademarks of Intel Corporation. ￭ Windows® is registered trademarks of Microsoft Corporation. ￭ AMI® is registered trademark of American Megatrends Inc. ￭ Award® is a registered trademark of Phoenix Technologies Ltd. ￭ Sound Blaster® is registered trademark of Creative Technology Ltd. ￭ Realtek® is registered trademark of Realtek Semiconductor Corporation. ￭ JMicron® is registered trademark of JMicron Technology Corporation. ￭ Netware® is registered trademark of Novell, Inc. ￭ Lucid® is trademark of LucidLogix Technologies, Ltd. ￭ VIA® is registered trademark of VIA Technologies, Inc. ￭ ASMedia® is registered trademark of ASMedia Technology Inc. ￭ iPad, iPhone, and iPod are trademarks of Apple Inc. ￭ Qualcomm Atheros and Killer are trademarks of Qualcomm Atheros Inc. Revision History Revision Revision History Date V3.0 First release 2013/03 ii MS-7752 Technical Support If a problem arises with your system and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance. http://www.msi.com/service/download/ Contact our technical staff at: http://support.msi.com Safety Instructions ￭ ￭ ￭ ￭ ￭ Always read the safety instructions carefully. Keep this User’s Manual for future reference. Keep this equipment away from humidity. Lay this equipment on a reliable flat surface before setting it up. The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS. ￭ Make sure the voltage of the power source is at 110/220V before connecting the equipment to the power inlet. ￭ Place the power cord such a way that people can not step on it. Do not place anything over the power cord. ￭ Always Unplug the Power Cord before inserting any add-on card or module. ￭ All cautions and warnings on the equipment should be noted. ￭ Never pour any liquid into the opening that can cause damage or cause electrical shock. ￭ If any of the following situations arises, get the equipment checked by service personnel: ◯ The power cord or plug is damaged. ◯ Liquid has penetrated into the equipment. ◯ The equipment has been exposed to moisture. ◯ The equipment does not work well or you can not get it work according to User’s Manual. ◯ The equipment has been dropped and damaged. ◯ The equipment has obvious sign of breakage. ￭ DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60oC (140oF), IT MAY DAMAGE THE EQUIPMENT. iii Preface Visit the MSI website for technical guide, BIOS updates, driver updates, and other information: Preface FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below. ◯ Reorient or relocate the receiving antenna. ◯ Increase the separation between the equipment and receiver. ◯ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ◯ Consult the dealer or an experienced radio/television technician for help. Notice 1 The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Notice 2 Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits. VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU. Micro-Star International MS-7752 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. CE Conformity Hereby, Micro-Star International CO., LTD declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive. iv MS-7752 Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment and its antenna should be installed and operated with minimum distance 20 cm between the radiator and your body. This equipment and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0–300GHz). This wireless device complies with the R&TTE Directive. Taiwan Wireless Statements 無線設備警告聲明 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻 率、加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立 即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線 電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之 干擾。 警告使用者:這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在 這種情況下，使用者會被要求採取某些適當的對策。 Japan VCCI Class B Statement クラス B 情報技術装置 この装置は、情報技術装置等電波障害自主規制協議会（VCCI）の基準に基づくクラ スB情報技術装置です。この装置が家庭内でラジオやテレビジョン受信機に近接して 使われると、受信障害を引き起こすことがあります。取扱説明書にしたがって正しい 取り扱いをしてください。 Korea Warning Statements 당해 무선설비는 운용중 전파혼신 가능성이 있음 Preface European Community Compliance Statement Preface Battery Information European Union: Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations. Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal. 廢電池請回收 California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ CAUTION: There is a risk of explosion, if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Chemical Substances Information In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: http://www.msi.com/html/popup/csr/evmtprtt_pcm.html vi MS-7752 WEEE (Waste Electrical and Electronic Equipment) Statement ENGLISH To protect the global environment and as an environmentalist, MSI must remind you that... DEUTSCH Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe. FRANÇAIS En tant qu’écologiste et afin de protéger l’environnement, MSI tient à rappeler ceci... Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits électriques et électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte cette exigence relative au retour des produits en fin de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte. РУССКИЙ Компания MSI предпринимает активные действия по защите окружающей среды, поэтому напоминаем вам, что.... В соответствии с директивой Европейского Союза (ЕС) по предотвращению загрязнения окружающей среды использованным электрическим и электронным оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005 года, изделия, относящиеся к электрическому и электронному оборудованию, не могут рассматриваться как бытовой мусор, поэтому производители вышеперечисленного электронного оборудования обязаны принимать его для переработки по окончании срока службы. MSI обязуется соблюдать требования по приему продукции, проданной под маркой MSI на территории EC, в переработку по окончании срока службы. Вы можете вернуть эти изделия в специализированные пункты приема. vii Preface Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points. Preface ESPAÑOL MSI como empresa comprometida con la protección del medio ambiente, recomienda: Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al final de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos. NEDERLANDS Om het milieu te beschermen, wil MSI u eraan herinneren dat…. De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten. SRPSKI Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini, MSI mora da vas podesti da… Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje. POLSKI Aby chronić nasze środowisko naturalne oraz jako firma dbająca o ekologię, MSI przypomina, że... Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych. viii MS-7752 TÜRKÇE Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır: ČESKY Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje... Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků 2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI, prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat v místních sběrnách. MAGYAR Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az MSI emlékezteti Önt, hogy ... Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti. ITALIANO Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che…. In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fine del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta ix Preface Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz. Preface ▍ Contents Copyright Notice�������������������������������������������������������������������������������������������� ii Trademarks���������������������������������������������������������������������������������������������������� ii Revision History�������������������������������������������������������������������������������������������� ii Technical Support�����������������������������������������������������������������������������������������iii Safety Instructions�����������������������������������������������������������������������������������������iii FCC-B Radio Frequency Interference Statement����������������������������������������� iv CE Conformity����������������������������������������������������������������������������������������������� iv Radiation Exposure Statement����������������������������������������������������������������������� v European Community Compliance Statement����������������������������������������������� v Taiwan Wireless Statements�������������������������������������������������������������������������� v Japan VCCI Class B Statement��������������������������������������������������������������������� v Korea Warning Statements���������������������������������������������������������������������������� v Battery Information���������������������������������������������������������������������������������������� vi Chemical Substances Information����������������������������������������������������������������� vi WEEE (Waste Electrical and Electronic Equipment) Statement�������������������vii Chapter 1 Getting Started���������������������������������������������������������������������������1-1 Packing Contents������������������������������������������������������������������������������������������������� 1-2 Optional Accessories������������������������������������������������������������������������������������������� 1-2 Assembly Precautions������������������������������������������������������������������������������������������ 1-3 Motherboard Specifications���������������������������������������������������������������������������������� 1-4 Connectors Quick Guide�������������������������������������������������������������������������������������� 1-6 Connectors Reference Guide������������������������������������������������������������������������������� 1-7 Back Panel Quick Guide�������������������������������������������������������������������������������������� 1-8 CPU (Central Processing Unit)�������������������������������������������������������������������������� 1-10 Mounting Screw Holes��������������������������������������������������������������������������������������� 1-14 Power Supply����������������������������������������������������������������������������������������������������� 1-15 Memory�������������������������������������������������������������������������������������������������������������� 1-16 Expansion Slots������������������������������������������������������������������������������������������������� 1-18 Video/ Graphics Cards �������������������������������������������������������������������������������������� 1-19 Internal Connectors�������������������������������������������������������������������������������������������� 1-24 Jumpers������������������������������������������������������������������������������������������������������������� 1-31 LED Status Indicators���������������������������������������������������������������������������������������� 1-32 Drivers and Utilities�������������������������������������������������������������������������������������������� 1-33 Chapter 2 BIOS Setup���������������������������������������������������������������������������������2-1 Entering���������������������������������������������������������������������������������������������������������������� 2-2 Overview�������������������������������������������������������������������������������������������������������������� 2-2 MS-7752 Boot device priority bar���������������������������������������������������������������������������������������� 2-3 Operation������������������������������������������������������������������������������������������������������������� 2-4 SETTINGS����������������������������������������������������������������������������������������������������������� 2-5 OC���������������������������������������������������������������������������������������������������������������������� 2-12 ECO������������������������������������������������������������������������������������������������������������������� 2-19 UTILITIES���������������������������������������������������������������������������������������������������������� 2-21 Updating the BIOS with Live Update������������������������������������������������������������������ 2-23 SECURITY��������������������������������������������������������������������������������������������������������� 2-24 Appendix A Realtek Audio�������������������������������������������������������������������������� A-1 Installing the Realtek HD Audio Driver�����������������������������������������������������������������A-2 Software Configuration�����������������������������������������������������������������������������������������A-3 Hardware Default Setting�������������������������������������������������������������������������������������A-5 Appendix B Intel RAID�������������������������������������������������������������������������������� B-1 Introduction����������������������������������������������������������������������������������������������������������B-2 Using Intel Rapid Storage Technology Option ROM�������������������������������������������B-3 Installing Driver��������������������������������������������������������������������������������������������������B-10 Degraded RAID Array����������������������������������������������������������������������������������������B-12 System Acceleration (optional)��������������������������������������������������������������������������B-14 RST Synchronization (optional)�������������������������������������������������������������������������B-16 Appendix C Install Windows XP Notes������������������������������������������������������� C-1 Installing Windows XP with IDE Mode���������������������������������������������������������������� C-2 Installing Windows XP with AHCI Mode�������������������������������������������������������������� C-3 xi Preface BROWSER��������������������������������������������������������������������������������������������������������� 2-20 Installing Winki��������������������������������������������������������������������������������������������������� 2-20 Chapter 1 Getting Started Thank you for choosing the Z77A-G45 GAMING Series (MS-7752 v3.X) ATX motherboard. The Series motherboards are based on Intel® Z77 chipset for optimal system efficiency. Designed to fit the advanced Intel® LGA1155 processor, the Z77A-G45 GAMING Series motherboards deliver a high performance and professional desktop platform solution. Getting Started Packing Contents Motherboard Drivers & Utilities Disc User Guide Backplate SATA Cable Optional Accessories USB 2.0 Bracket USB 3.0 Bracket eSATA Power Cable eSATA Bracket M-Connector USB3 to USB2 Connector SATA Power Cable CrossFire Cable SLI Cable MSI MultiConnect Panel * These pictures are for reference only and may vary without notice. * The packing contents may vary according to the model you purchased. * If you need to purchase the optional accessories or request part numbers, please visit the MSI website at http://www.msi.com/index.php or consult the dealer. 1-2 MS-7752 Assembly Precautions Important A screwdriver (not included) may be required for computer assembly. 1-3 Chapter 1 ■ The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. ■ Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component. ■ Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start. ■ Hold the motherboard by the edges to avoid touching sensitive components. ■ It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard. ■ Store the motherboard in an electrostatic shielding container or on an antistatic pad whenever the motherboard is not installed. ■ Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case. ■ Do not use the computer in a high-temperature environment. ■ Do not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user. ■ If you need help during any installation step, please consult a certified computer technician. Getting Started Motherboard Specifications Processor Support ■ 3rd Generation Intel® Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® processors in an LGA 1155 socket Chipset ■ Intel® Z77 chipset Memory Support ■ 4x DDR3 DIMMs support for DDR3-1066/1333/1600/1866*/2000*/2133*(OC), 2200*/ 2400*/2600*/2667*/2800*(OC, 22nm CPU required) MHz up to 32GB max ■ Supports Dual-Channel mode LAN ■ Supports LAN 10/100/1000 Fast Ethernet by Killer® E2205 Gigabit** - **The Killer Network Manager is only available for Windows 7 and Windows 8 currently. The supported drivers for other operating systems would be available on the website if provided by vendor. Audio ■ Integrated HD audio codec by Realtek® ALC892 ■ Supports Sound Blaster Cinema SATA ■ 2x SATA 6Gb/s ports - (SATA1~2) by Intel® Z77 ■ 4x SATA 3Gb/s ports - (SATA3~6) by Intel® Z77 RAID ■ SATA1~6 support Intel® Rapid Storage Technology enterprise (AHCI/ RAID 0/ 1/ 5/ 10) by Intel® Z77 USB 3.0 ■ 2x USB 3.0 rear IO ports by Intel® Z77 ■ 1x USB 3.0 onboard connector by Intel® Z77 Multi-GPU ■ Supports ATI® CrossFireTM Technology ■ Supports NVIDIA® SLITM Technology ■ Supports Lucid® Virtu Universal MVP 1-4 MS-7752 Connectors & Buttons Slots ■ 2x PCIe 3.0 x16 slots ■ 1x PCIe 2.0 x16 slot - PCI_E7 supports up to PCIe x4 speed ■ 4x PCIe 2.0 x1 slots - When PCI_E4 is installed, PCI_E3 will be no function. Form Factor ■ ATX (30.5 cm X 24.5 cm) Mounting Screw Holes ■ 9x mounting holes For the latest information about processors, please visit http://www.msi.com/service/cpu-support/ For more information on compatible components, please visit http://www.msi.com/service/test-report/ 1-5 Chapter 1 ■ Back panel - 1x PS/2 keyboard/ mouse port - 1x Clear CMOS button - 1x Coaxial S/PDIF-out port - 1x Optical S/PDIF-out port - 4x USB 2.0 ports - 2x USB 3.0 ports - 1x LAN port - 6x audio ports - 1x HDMI® port***, supporting a maximum resolution of 1920x1200 - 1x DVI-D port***, supporting a maximum resolution of 1920x1200 - 1x VGA port*** - *** This platform supports dual-display function by any two output ports (HDMI+DVI, DVI+VGA or VGA+HDMI). ■ On-Board - 3x USB 2.0 connectors - 1x USB 3.0 connector - 1x Serial port connector - 1x TPM Module connector - 1x Front Panel Audio connector - 1x Chassis Intrusion connector - 1x Voice Genie connector - 1x MultiConnect Panel connector - 1x V-Check Points Set (optional) Getting Started Connectors Quick Guide DIMM4 DIMM3 DIMM2 DIMM1 SYSFAN2 CPU JPWR2 SYSFAN3 CPUFAN JTURBO1 JPWR1 Back Panel FV1 SYSFAN1 PCI_E1 PCI_E2 SATA1_2 PCI_E3 SATA3_4 PCI_E4 JBAT1 SATA5_6 PCI_E5 JUSB4 PCI_E6 JCI1 PCI_E7 JUSB3 JAUD1 JCOM1 SYSFAN4 JFP2 JDLED3 1-6 JUSB2 JFP1 JTPM1 JUSB1 MS-7752 Connectors Reference Guide Port Name Port Type Page 1-8 CPU LGA1155 CPU Socket 1-10 CPUFAN,SYSFAN1~4 Fan Power Connectors 1-25 DIMM1~4 DDR3 Memory Slots 1-16 FV1 Voltage Checkpoints Connector 1-30 JAUD1 Front Panel Audio Connector 1-26 JBAT1 Clear CMOS Jumper 1-31 JCI1 Chassis Intrusion Connector 1-28 JCOM1 Serial Port Connector 1-29 JDLED3 Voice Genie Connector 1-29 JFP1, JFP2 Front Panel Connectors 1-26 JPWR1 ATX 24-pin Power Connector 1-15 JPWR2 ATX 8-pin Power Connector 1-15 JTPM1 TPM Module connector 1-28 JTURBO1 MultiConnect Panel Connector 1-29 JUSB1~3 USB 2.0 Expansion Connectors 1-27 JUSB4 USB 3.0 Expansion Connector 1-27 PCI_E2, 5, 7 PCIe x16 Expansion Slots 1-18 PCI_E1, 3, 4, 6 PCIe x1 Expansion Slots 1-18 SATA1~2 SATA 6Gb/s Connectors 1-24 SATA3~6 SATA 3Gb/s Connectors 1-24 1-7 Chapter 1 Back Panel Getting Started Back Panel Quick Guide Mouse/Keyboard Coaxial USB 2.0 Port S/PDIF-Out LAN VGA Port Line-In RS-Out Line-Out CS-Out USB 2.0 Port Optical S/PDIF-Out HDMI Port USB 3.0 Port DVI-D Port Mic SS-Out Clear CMOS Button ▶ Mouse/Keyboard A combination PS/2® mouse/keyboard DIN connector for a PS/2® mouse/keyboard. ▶ Clear CMOS Button There is CMOS RAM present on board that is powered by an external battery to store system configuration data. Using CMOS RAM, the system can automatically boot into the operating system (OS) every time it is turned on. If you wish to clear the system configuration, press the button to clear the data. ▶ Coaxial S/PDIF-Out This S/PDIF (Sony & Philips Digital Interconnect Format) connector is provided for digital audio transmission to external speakers through an coaxial cable. ▶ Optical S/PDIF-Out This S/PDIF (Sony & Philips Digital Interconnect Format) connector is provided for digital audio transmission to external speakers through an optical fiber cable. ▶ USB 2.0 Port The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mouse, or other USB 2.0-compatible devices. ▶ HDMI Port The High-Definition Multimedia Interface (HDMI) is an all-digital audio-video interface that is capable of transmitting uncompressed streams. HDMI supports all types of TV formats, including standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable. ▶ USB 3.0 Port USB 3.0 port is backward-compatible with USB 2.0 devices. It supports data transfer rate up to 5 Gbit/s (SuperSpeed). Important In order to use USB 3.0 devices, you must connect to a USB 3.0 port. If a USB cable is used, it must be USB 3.0 compliant. 1-8 MS-7752 ▶ LAN The standard RJ-45 LAN jack is for connecting to a Local Area Network (LAN). Yellow Green/ Orange Color LED State Condition Left Yellow Off LAN link is not established. On(Steady) LAN link is established. On(flashing) The computer is communicating with another computer on the network. Off 10 Mbits/sec data rate Right Green Orange On 100 Mbits/sec data rate On 1000 Mbits/sec data rate ▶ VGA Port The DB15-pin female connector is provided for monitor. ▶ DVI-D Port The DVI-D (Digital Visual Interface- Digital) connector can be connected to a LCD monitor, or a CRT monitor with an adapter. To connect a monitor, please refer to the monitor’s manual for more information. Important This platform supports dual-display function by any two output ports (HDMI+DVI, DVI+VGA or VGA+HDMI). HDMI+DVI DVI+VGA VGA+HDMI Extend mode (Extend the desktop to the second monitor) ◯ ◯ ◯ Clone mode (Two monitors have the same screen) ◯ ◯ ◯ ▶ Audio Ports These connectors are used for audio devices. The color of the jack refers to the function of the connector. ■ Blue-Line in: Used for connecting external audio outputting devices. ■ Green- Line out: Used as a connector for speakers or headphone. ■ Pink- Mic: Used as a connector for a microphone. ■ Black- RS-Out: Rear surround sound line out in 4/ 5.1/ 7.1 channel mode. ■ Orange- CS-Out: Center/ subwoofer line out in 5.1/ 7.1 channel mode. ■ Gray- SS-Out: Side surround sound line out in 7.1 channel mode. 1-9 Chapter 1 LED Getting Started CPU (Central Processing Unit) Introduction to the LGA 1155 CPU The surface of the LGA 1155 CPU has two alignment keys and a yellow triangle to assist in correctly lining up the CPU for motherboard placement. The yellow triangle is the Pin 1 indicator. Alignment Key Alignment Key Yellow triangle is the Pin 1 indicator Important Overheating Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation. Replacing the CPU When replacing the CPU, always turn off the system’s power supply and unplug the power supply’s power cord to ensure the safety of the CPU. Overclocking This motherboard is designed to support overclocking. Before attempting to overclock, please make sure that all other system components can tolerate overclocking. Any attempt to operate beyond product specifications is not recommend. MSI does not guarantee the damages or risks caused by inadequate operation beyond product specifications. 1-10 MS-7752 CPU & Cooler Installation When installing a CPU, always remember to install a CPU cooler. A CPU cooler is necessary to prevent overheating and maintain system stability. Follow the steps below to ensure correct CPU and CPU cooler installation. Wrong installation can damage both the CPU and the motherboard. 2. The loading plate should automatically lift up as the loading lever is pushed to the fully open position. Do not touch any of the CPU socket pins. 3. Line up the CPU to fit the CPU socket. Be sure to hold the CPU by the base with the metal contacts facing downward. The alignment keys on the CPU will line up with the edges of the CPU socket to ensure a correct fit. 4. Close the loading plate and remove the plastic protective cap. Alignment Key 1-11 Chapter 1 1. Unhook and lift the loading lever to the fully open position. Getting Started 5. Inspect the CPU to check if it is properly seated in the socket. Press the loading lever down and lock it under the retention tab. 6. Evenly spread a thin layer of thermal paste (or thermal tape) on the top of the CPU. This will help in heat dissipation and prevent CPU overheating. 7. Locate the CPU fan connector on the motherboard. 8. Place the heatsink on the motherboard with the fan’s wires facing towards the fan connector and the hooks matching the holes on the motherboard. 1-12 MS-7752 9. Push down on the heatsink until the four clips get wedged into the holes on the motherboard. Press the four hooks down to fasten the cooler. As each hook locks into position a click should be heard. 10. Inspect the motherboard to ensure that the clip-ends have been properly locked in place. Chapter 1 Motherboard Hook 11. Finally, attach the CPU fan cable to the CPU fan connector on the motherboard. Important • Do not touch the CPU socket pins. • Confirm that the CPU cooler has formed a tight seal with the CPU before booting your syste. • Whenever the CPU is not installed, always protect the CPU socket pins by covering the socket with the plastic cap. • Please refer to the documentation in the CPU cooler package for more details about CPU cooler installation. 1-13 Getting Started Mounting Screw Holes When installing the motherboard, first install the necessary mounting stands required for an motherboard on the mounting plate in your computer case. If there is an I/O back plate that came with the computer case, please replace it with the I/O backplate that came with the motherboard package. The I/O backplate should snap easily into the computer case without the need for any screws. Align the mounting plate’s mounting stands with the screw holes on the motherboard and secure the motherboard with the screws provided with your computer case. The locations of the screw holes on the motherboard are shown below. For more information, please refer to the manual that came with the computer case. The I/O ports should be facing toward the rear of the computer case. They should line up with the holes on the I/O backplate. Important • Install the motherboard on a flat surface free from unnecessary debris. • To prevent damage to the motherboard, any contact between the motherboard circuitry and the computer case, except for the mounting stands, is prohibited. • Please make sure there are no loose metal components on the motherboard or within the computer case that may cause a short circuit of the motherboard. 1-14 MS-7752 Power Supply JPWR1: ATX 24-pin Power Connector d n u ro V .G 5 V 4 2 3.+ +5 V d 2 2. +5 s un d 2 1. e o n d 2 0.R Gr rou un # 2 9. G ro ON d - n 1 8. 1 7.G PS ou 1 6. Gr 2V V 1 . 1 .3 5 1 4.- +3 1 3. 1 V .3 3 V .+ 2 V 2 1 2 1 1.+ +1 B OK 1 0. VS R nd 1 .5 W u 9 .P ro nd 8 .G 5V u d 7 .+ ro 6 .G 5V un 5 .+ ro 3V 4 G . V . 3 .+3 3.3 2 .+ 1 JPWR2: ATX 8-pin Power Connector This connector provides 12V power to the CPU. d n u d ro un nd .G ro u d 4 G ro un . 3 .G ro 2 .G 1 V 2 1 V .+ 2 V 8 .+1 2 V 7 .+1 12 6 .+ 5 Important Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard. 1-15 Chapter 1 This connector allows you to connect an ATX 24-pin power supply. To connect the ATX 24-pin power supply, align the power supply cable with the connector and firmly press the cable into the connector. If done correctly, the clip on the power cable should be hooked on the motherboard’s power connector. Getting Started Memory These DIMM slots are used for installing memory modules. For more information on compatible components, please visit http://www.msi.com/service/test-report DDR3 240-pin, 1.5V 48x2=96 pin 72x2=144 pin Dual-Channel mode Population Rule In Dual-Channel mode, the memory modules can transmit and receive data with two data bus channels simultaneously. Enabling Dual-Channel mode can enhance system performance. The following illustrations explain the population rules for Dual-Channel mode. 1 DIMM1 DIMM2 DIMM3 DIMM4 2 DIMM1 DIMM2 DIMM3 DIMM4 Installed Empty Important • DDR3 memory modules are not interchangeable with DDR2, and the DDR3 standard is not backward compatible. Always install DDR3 memory modules in DDR3 DIMM slots. • To ensure system stability, memory modules must be of the same type and density in Dual-Channel mode. • Due to chipset resource usage, the system will only detect up to 31+ GB of memory (not full 32 GB) when all DIMM slots have 8GB memory modules installed. 1-16 MS-7752 Installing Memory Modules 1. Unlock the DIMM slot by pushing the mounting clips to the side. Vertically insert the memory module into the DIMM slot. The memory module has an off-center notch on the bottom that will only allow it to fit one way into the DIMM slot. 3. Manually check if the memory module has been locked in place by the DIMM slot’s side clips. Notch Volt 1-17 Chapter 1 2. Push the memory module deep into the DIMM slot. The plastic clips at each side of the DIMM slot will automatically close when the memory module is properly seat and an audible click should be heard. Getting Started Expansion Slots This motherboard contains numerous ports for expansion cards, such as discrete graphics or audio cards. PCIe (Peripheral Component Interconnect Express) Slot The PCIe slot supports the PCIe interface expansion card. PCIe 3.0 x16 Slot PCIe 2.0 x16 Slot PCIe 2.0 x1 Slot Important When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card’s documentation to check for any necessary additional hardware or software changes. 1-18 MS-7752 Video/ Graphics Cards If available, this motherboard takes advantage of the CPU’s integrate graphics processor, but discrete video cards can be installed by way of the motherboard’s expansion slots. Adding on one or more discrete video cards will significantly boost the system’s graphics performance. For best compatibility, MSI graphics cards are recommended. 1. Determine what type of expansion slot(s) the video card will use. Locate the expansion slot(s) on the motherboard. Remove any protective expansion slot covers from the computer case. 2. Line up the video card on top of the expansion slot(s) with the display ports facing out of the computer case. For a single video card installation, using the PCI_E2 slot is recommended. 3. Push the video card into its expansion slot(s). Depending on the expansion slot(s) used, there should be clip(s) on the expansion slot(s) that will lock in place. 4. If needed, screw the edge of the graphics card to the computer case. Some video cards might require a power cable directly from the power supply. 5. Please consult your video card’s manual for further instructions regarding driver installation or other special settings. 1-19 Chapter 1 Single Video Card Installation Getting Started AMD CrossFire™ (Multi-GPU) Technology AMD CrossFire™ is a multi-GPU performance gaming platform. By linking together two or more discrete GPUs, CrossFire™ can significant improve system graphics performance. It allows the ability to scale a system’s graphics power as needed, making it the most scalable gaming platform. This motherboard will automatically detect CrossFire™ technology and make changes in the BIOS as needed. Follow the instructions below to ensure a successful two-way CrossFire™ installation. 1. Install two AMD Radeon™ HD graphics cards into the PCI_E2 & PCI_E5 expansion slots. 2. With the two cards installed, two CrossFire™ Video Link cable are required to connect the graphics cards. Attach one side of the cable on each of the cards by way of the metal contacts (please refer to the picture below). Please note that although two graphics cards have been installed, only the display ports on the graphics card installed in the first PCIe x16 slot will work. All displays should be connected to this graphics card. CrossFireTM Video Link cable Important • Please ensure that all graphics cards used in CrossFire™ mode are of the same brand and specifications. For best compatibility with the motherboard, MSI graphics cards are recommended. • Make sure to connect an adequate power supply to the power connectors on the graphics cards to ensure stable operation. • Only Windows® XP with Service Pack 2 (SP2), Windows™ XP Professional x64 Edition & Windows™ 7 will support CrossFire™ mode. 1-20 MS-7752 3. Boot up the computer and install the drivers and software included in your video card package. For more information, please refer to the manual that came with your video card. 4. After all of the hardware and software has been properly installed, reboot the system. After entering the operating system (OS), right click on the desktop and choose the “Catalyst Control Center II”. Chapter 1 5. The CrossFire™ setting must be enabled to allow CrossFire™ mode to operate. The follow screen appears in the Catalyst Control Center II. Depending on your operating system, the screen may look different. Important A CrossFireTM system has four possible display modes: • SuperTiling • Scissor Mode • Alternate Frame Rendering • Super Anti-aliasing. For more details, please consult the graphics card manual. 1-21 Getting Started NVIDIA® SLI Technology NVIDIA’s SLI (Scalable Link Interface) technology allows two or more GPUs to run in tandem within a system to achieve significant graphics performance gains. To utilize this technology, the GPU cards must be connected by an SLI Video Link. If you intend to use SLI mode, please follow the instructions below to properly set up SLI mode. The instructions below are meant for a two video card SLI configuration. 1. Install two NVIDIA graphics cards in the PCI_E2 and the PCI_E5 slots. 2. With the two cards installed, a SLI Video Link cable is required to connect the graphics cards. Attach one side of the cable on each of the cards by way of the metal contacts (please refer to the picture below). Please note that although two graphics cards have been installed, only the display ports on the graphics card installed in the first PCIe x16 slot will work. All displays should be connected to this graphics card. SLI Video Link Card 3. Boot up the computer and install the drivers and software included in your video card package. For more information, please refer to the manual that came with your video card. 1-22 MS-7752 4. After all of the hardware and software has been properly installed, reboot the system. After entering the operating system (OS), right click on the desktop and choose the “NVIDIA Control Panel”. Chapter 1 5. Enter the NVIDIA Control Panel. Choose the “Maximize 3D Performance” setting to enable SLI mode. The configuration screen is shown below. Depending on your operating system, the screen may look different. Choose this item Important • Please ensure that all graphics cards used in SLI mode are of the same brand and specifications. For best compatibility with the motherboard, MSI graphics cards are recommended. • Make sure to connect an adequate power supply to the power connectors on the graphics cards to ensure stable operation. • If you wish to remove one graphics card and quit the SLI function, make sure the “Maximize 3D Performance” function is disabled before removing the graphics card. 1-23 Getting Started Internal Connectors SATA1~6: SATA Connector This connector is a high-speed SATA interface port. Each connector can connect to one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD), and optical drives (CD/ DVD/ Blu-Ray). * The MB layout in this figure is for reference only. SATA6 SATA5 SATA4 SATA3 SATA2 SATA1 SATA1~2 (6Gb/s, by Intel® Z77) SATA3~6 (3Gb/s, by Intel® Z77) Important • Many SATA devices also need a power cable from the power supply. Such devices include disk drives (HDD), solid state drives (SSD), and optical drives (CD / DVD / Blu-Ray). Please refer to the device’s manual for further information. • Many computer cases also require that large SATA devices, such as HDDs, SSDs, and optical drives, be screwed down into the case. Refer to the manual that came with your computer case or your SATA device for further installation instructions. • Please do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission otherwise. • SATA cables have identical plugs on either sides of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes. 1-24 MS-7752 CPUFAN,SYSFAN1~4: Fan Power Connectors CPUFAN d n u ro 2V or l .G 1 s o 1 .+ en tr 2 .S on 3 .C 4 d n u ro 2V or .G 1 s e 1 + en Us . 2 .S o 3 .N 4 SYSFAN1/ SYSFAN2 d n u ro 2V se .G 1 1 .+ o U 2 .N 3 SYSFAN3/ SYSFAN4 Important • Please refer to your processor’s official website or consult your vendor to find recommended CPU cooling fans. • The CPUFAN, SYSFAN1, SYSFAN2 connectors support Smart Fan Control with liner mode. The Control Center II utility can be installed to automatically control the fan speeds according to the CPU’s and system’s temperature. • If there are not enough ports on the motherboard to connect all system fans, adapters are available to connect a fan directly to a power supply. • Before first boot up, ensure that there are no cables impeding any fan blades. 1-25 Chapter 1 The fan power connectors support system cooling fans with +12V. If the motherboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with a speed sensor to take advantage of the CPU fan control. Remember to connect all system fans. Some system fans may not connect to the motherboard and will instead connect to the power supply directly. A system fan can be plugged into any available system fan connector. Getting Started JFP1, JFP2: Front Panel Connectors 2 .+ 8 . 6 .+ 4 . These connectors connect to the front panel switches and LEDs. The JFP1 connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide. When installing the front panel connectors, please use the enclosed mConnectors to simplify installation. Plug all the wires from the computer case into the mConnectors and then plug the mConnectors into the motherboard. r ake Spe zer Buz D D in E LE P rL d o e n .N w e d 7 .Po sp n 5 .Su rou 3 .G 1 JFP2 P o w e r 0 in P o 8. + . .N 6 . 4 + . 2 e ch w it o w 1 S P r L E D ch it w d S e t rv se D E se e L e R D .R D 9 .+ H 7 . 5 .3 .+ 1 JFP1 Important • On the connectors coming from the case, pins marked by small triangles are positive wires. Please use the diagrams above and the writing on the mConnectors to determine correct connector orientation and placement. • The majority of the computer case’s front panel connectors will primarily be plugged into JFP1. JAUD1: Front Panel Audio Connector This connector allows you to connect the front audio panel located on your computer case. This connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide. ct te e D e n o n h io P ct d e a e in et .H P D 0 o 1 .N IC 8 .M C nd 6 N ou . 4 Gr . 2 io n L e D n o N h E R P _S ne d o a E h e NS P .H E d 9 .S a R 7 .He IC L 5 M IC . 3 .M 1 1-26 MS-7752 JUSB1~3: USB 2.0 Expansion Connectors This connector is designed for connecting high-speed USB peripherals such as USB HDDs, digital cameras, MP3 players, printers, modems, and many others. 115V Chapter 1 d C un + .N o 1 0 r B 11 .G 8 US B . S 6 .U C 4 VC . 2 in P nd o u + .N ro 0 9 .G SB 07 U B . S 5 .U CC 3 .V 1 * The MB layout in this figure is for reference only. USB 2.0 Bracket (optional) Important Note that the VCC and GND pins must be connected correctly to avoid possible damage. JUSB4: USB 3.0 Expansion Connector The USB 3.0 port is backwards compatible with USB 2.0 devices. It supports data transfer rates up to 5Gbits/s (SuperSpeed). 115V N D _ DP in N P r X _ D o e _R X _ P C D .N w 3 R _ _ 0 o B _ 2 .P S B3 nd X _C T 9 1 8.U S ou _ X 1 7.U Gr B3 _T 1 6. S B3 nd 1 .U S u .0 + o 5 1 .U r B2 .0 4 1 3.G S B2 1 2.U S 1 1.U 1 N D _ DP N r X _ D e R X _ P w _ o B3 _R _C _D .P S 3 d X C 1 U B n T _ . 2 .US rou 3_ TX 3 .G SB 3_ d 4 .U B n 0 5 US rou 2. 0 + . 6 .G SB 2. nd 7 U B u . S 8 .U ro 9 0.G 1 * The MB layout in this figure is for reference only. USB 3.0 Bracket (optional) Important • Note that the VCC and GND pins must be connected correctly to avoid possible damage. • To use a USB 3.0 device, you must connect the device to a USB 3.0 port through an optional USB 3.0 compliant cable. 1-27 Getting Started JCI1: Chassis Intrusion Connector This connector connects to the chassis intrusion switch cable. If the computer case is opened, the chassis intrusion mechanism will be activated. The system will record this intrusion and a warning message will flash on screen. To clear the warning, you must enter the BIOS utility and clear the record. d n u RU ro T .G IN 2 .C 1 JTPM1: TPM Module connector This connector connects to a TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages. TPM module is optional 115V 3 in p 2 ta in a p 1 d ta pin 0 n e s & da ta pi m s & da ta a ra re s F d s & d C ad dre ss & P re s .L C d d s 3 P a d re 1 1.L C a dd et 1 .LP C a es k 9 .LP C R loc 7 .LP C C 5 .LP C 3 .LP 1 d n u d r ro un n r e .G ro Pi we Q r ow 4 1 2.G o Po IR we y p l 1 .N a o b V i 0 1 .5 er P nd 8 .S 3V ta 6 .3. S 4 .3V 2 * The MB layout in this figure is for reference only. 1-28 MS-7752 JDLED3: Voice Genie Connector (optional) This connector is used to link to the voice control module (optional). Please refer to its user guide for more details and usages. in p d n d u rve ro se d in p .G e n l in u p 3 1 .R ro tro l in 11 .G on tro l p o n 9 C tr . 7 .Co n B o 5 C S . 3 .5V 1 Chapter 1 in p n l i o p tr l n o in o tr p n n .C o Pi ol 4 in 1 2.C o tr p 1 .N n 3 l pin o 0 1 .C C tro l 8 .VC n ro t 6 Co n . 4 .Co 2 JTURBO1: MultiConnect Panel Connector (optional) This connector is used to connect an optional front panel for controling the OC Genie and some additional functions. Please refer to its user guide for more details and usages. in lP o tr n O o RB .C 2 .TU 1 in P O o RB .N 4 .TU 3 JCOM1: Serial Port Connector This connector is a 16550A high speed communication port that sends/receives 16 bytes FIFOs. You can attach a serial device. in P o .N S 0 T R 1 .C S 8 D R . 6 T .D N 4 SI . 2 I S d .R T n 9 . R r ou T 7 .G U 5 SO C D . 3 .D 1 1-29 Getting Started FV1: Voltage Checkpoints Connector (optional) These voltage checkpoint are used to measure the current system voltages. A multimeter (not included) will be required to check voltages. To check the voltage, please use the included voltage checkpoint cables included in the motherboard package. Attach the positive lead of the multimeter to the voltage checkpoint cable and the negative lead to the ground connector. 7 GND GND PCH_1P05 VCC_DDR CPU_GFX CPU_VTT 1 VCCP Point Description GND (pin 6, pin 7) Ground PCH_1P05 (pin 5) PCH 1.5 voltage. The PCH voltage is the voltage supplied to the Platform Controller Hub. VCC_DDR (pin 4) Memory voltage. The DDR memory voltage is the voltage supplied to the DDR memory modules on the motherboard. Lower memory timings may require higher voltages to maintain system stability. CPU_GFX (pin 3) The CPU_GFX voltage is the voltage supplied to the integrated graphics processor located on the CPU. CPU_VTT (pin 2) CPU IO voltage (Uncore). The CPU IO voltage is the voltage supplied to the Uncore on the CPU. Higher overclocks may require a higher CPU IO voltage to maintain stability. VCCP (pin 1) CPU core voltage. The CPU voltage is the voltage suppoied to the CPU core. Higher overclocks may require higher CPU core voltages to maintain stability. 1-30 MS-7752 Jumpers JBAT1: Clear CMOS Jumper 1 Keep Data 1 Clear Data Important You can clear the CMOS RAM by shorting this jumper while the system is off. Afterwards, open the jumper . Do not clear the CMOS RAM while the system is on because it will damage the motherboard. 1-31 Chapter 1 There is CMOS RAM onboard that is external powered from a battery located on the motherboard to save system configuration data. With the CMOS RAM, the system can automatically boot into the operating system (OS) every time it is turned on. If you want to clear the system configuration, set the jumpers to clear the CMOS RAM. Getting Started LED Status Indicators CPU_PHASE LEDs CPU_PHASE LEDs These LEDs will change according to CPU loading. The higher the power phase number, the more reliable the power flow to the processor. 1-32 MS-7752 Drivers and Utilities After you install the operating system you will need to install drivers to maximize the performance of the new computer you just built. MSI motherbaord comes with a Driver Disc. Drivers allow the computer to utilize your motherboard more efficiently and take advantage of any special features we provide. Total Installer is very easy to use and does a great job of finding necessary drivers. Please follow the steps below to install drivers and utilities for your new computer. 1. Insert MSI Driver Disc into the optical drive. The setup screen will automatically appear if autorun is enabled in OS. 2. Click Total Installer. A popup dialog will appear listing all necessary drivers. 3. Select all checkbox on driver listing dialogue. Click here 4. Click Install button. 5. The software installation will then be in progress, after it has finished it will prompt you to restart. 6. Click OK button to finish. 7. Restart your computer. You can also use the same method to install the utilities. 1-33 Chapter 1 Total Installer Chapter 2 BIOS Setup CLICK BIOS II is a revolutionary UEFI interface that allows you to setup and configure your system for optimum use. Using your mouse and keyboard, users can change BIOS settings, monitor CPU temperature, select the boot device priority and view system information such as the CPU name, DRAM capacity, the OS version and the BIOS version. Users can import and export parameter data for backup or for sharing with friends. By connecting to the Internet within CLICK BIOS II, users can browse webpages, check mail and use Live Update iyour system. BIOS Setup Entering Power on the computer and the system will start the Power On Self Test (POST) process. When the message below appears on the screen, pleasekey to enter CLICK BIOS II: Press DEL key to enter Setup Menu, F11 to enter Boot Menu If the message disappears before you respond and you still need to enter CLICK BIOS II, restart the system by turning the computer OFF then back ON or pressing the RESET button. You may also restart the system by simultaneously pressing, , and keys. Important The items under each BIOS category described in this chapter are under continuous update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be held for reference only. Overview After entering Click BIOS II, the following screen is displayed. Temperature monitor Mode selection System information Boot menu Boot device priority bar BIOS menu selection BIOS menu selection Menu display Important The pictures in this guide are for reference only and may vary from the product you purchased. Please refer to the actual screens of your system for detailed information. ▶ Temperature monitor This block shows the temperature of the processor and the motherboard. 2-2 MS-7752 Boot device priority bar This bar shows the priority of the boot devices. The lighted icons indicate that the devices are available. High priority Low priority Click and draw the icon to left or right to specify the boot priority. ■ Boot device icon list Hard disk USB Drive drive Optical disk LAN BEV USB hard disk drive USB optical drive UEFI Disable USB floppy 2-3 Chapter 2 ▶ System information This block shows the time, date, CPU name, CPU frequency, DRAM frequency, DRAM capacity and the BIOS version. ▶ BIOS menu selection The following options are available: ■ SETTINGS - Use this menu to specify your settings for chipset features and boot devices. ■ OC - This menu contains items of the frequency and voltage adjustments. Increasing the frequency can get better performance, however high frequency and heat can cause instability, we do not recommend general users to overclock. ■ ECO - This menu is related to energy-saving settings. ■ BROWSER - This feature is used to enter the MSI Winki web browser. ■ UTILITIES - This menu contains utilities for backup and update. ■ SECURITY - The security menu is used to keep unauthorized people from making any changes to the settings. You can use these security features to protect your system. ▶ Boot device priority bar You can move the device icons to change the boot priority. ▶ Boot menu This button is used to open a boot menu. Click the item to boot the system from the device instantly. ▶ Mode selection This feature allows you to load presets of energy saving or overclocking. ▶ Menu display This area provides BIOS settings and information to be configured. BIOS Setup Operation CLICK BIOS II allows you to control BIOS settings with the mouse and the keyboard. The following table lists and describes the hot keys and the mouse operations. Hot key Mouse <↑↓→← > Description Select Item . Move the cursor Select Icon/ Field Click/ Double-click the left button Jump to the Exit menu or return to the previous from a submenu Click the right button <+> Increase the numeric value or make changes <-> Decrease the numeric value or make changes General Help CPU Specifications Enter Memory-Z Load optimized defaults OC Profile Load From USB OC Profile Save to USB Save Change and Reset Save a screenshot to a FAT/FAT32 USB drive Sub-Menu If you find a point symbol to the left of certain fields, that means a sub-menu can be launched for additional options. You can use the arrow keys or mouse to highlight the field and press or double-click the left mouse button to enter the sub-menu. If you want to return to the previous menu, just press or click the right mouse button. General Help The General Help screen lists the appropriate keys to use for navigation. You can call up this screen from any menu by simply pressing . Press to exit the Help screen. 2-4 MS-7752 SETTINGS Chapter 2 System Status ▶ System Date This allows you to set the system date that you want (usually the current date). The format is . day Day of the week, from Sun to Sat, determined by BIOS. Read-only. month The month from Jan. through Dec. date The date from 1 to 31 can be keyed by numeric function keys. year The year can be adjusted by users. ▶ System Time This allows you to set the system time that you want (usually the current time). The time format is . ▶ SATA Port1~6 Shows devices connected to specific SATA ports. Important If your device is not displayed, turn off computer and re-check SATA cable and power cable connections to the device. ▶ System Information Shows detailed system information, including CPU type, BIOS version, and Memory (read only). 2-5 BIOS Setup Advanced ▶ PCI Subsystem Settings Press to enter the sub-menu. ▶ PCIE GEN3 When set to [Enabled], the feature allows PCIe 3.0 slots support expansion cards with PCIe generation 3.0 link speed. To avoid PCIe 1.0, 2.0 card compatibility problems, you can set to [Disabled]. ▶ PCI Latency Timer Controls how long each PCI device can hold the bus before another takes over. When set to higher values, every PCI device can conduct transactions for a longer time and thus improve the effective PCI bandwidth. ▶ ACPI Settings Press to enter the sub-menu. ▶ ACPI Standby State Specifies the power saving mode for ACPI function [S1] Sleep Mode. Hardware remains on. [S3] Suspend to RAM. Turns off hardware. (Recommended) ▶ Power LED Configures how the system uses power LEDs on the case to indicate sleep/ suspend state. [Blinking] The power LED blinks to indicate the sleep/suspend state. [Dual Color] The power LED changes its color to indicate the sleep/suspend state. ▶ Integrated Peripherals Press to enter the sub-menu. ▶ Onboard LAN Controller This item allows you to enable/ disable the onboard LAN controller. ▶ LAN Option ROM This item is used to decide whether to invoke the Boot ROM of the onboard LAN. ▶ Network Stack This item is used to enable/ disable UEFI network stack. ▶ Ipv4 PXE Support This item appears when you set “Enabled” in [Network Stack] field and is used to enable/ disable the Ipv4 PXE boot support. ▶ Ipv6 PXE Support This item appears when you set “Enabled” in [Network Stack] field and is used to enable/ disable the Ipv6 PXE boot support. ▶ SATA Mode This item is used to specify RAID/ IDE/ AHCI mode for SATA port. 2-6 MS-7752 Important You cannot switch between AHCI and IDE if you already have your operating system installed. If you have installed your OS using AHCI and you clear your BIOS/reset to default settings, you will need to change this function back to AHCI to ensure proper functionality. ▶ Port 1~6 Hot Plug These items are used to enable/ disable the SATA ports hot plug support. ▶ HPET The HPET (High Precision Event Timers) is a component that is part of the chipset. You can enable it, and will provide you with the means to get to it via the various ACPI methods. ▶ Integrated Graphics Configuration Press to enter the sub-menu. ▶ Initiate Graphic Adapter Choose which adapter you wish to make the primary option [PEG] PCI-Express Graphics Device [IGD] Integrated Graphics Display ▶ Integrated Graphics Share Memory The system shares memory to the integrated graphics. This setting controls the exact memory size shared to the integrated graphics. ▶ DVMT Memory Specify the size of DVMT memory to allocate for video memory. ▶ IGD Multi-Monitor Enables both integrated and discrete graphics at the same time. When disabled, it will default to Initiated Graphics Adapter selection. ▶ Intel(R) Rapid Start Technology Press to enter the sub-menu. ▶ Intel(R) Rapid Start Technology This feature can make your system fast start up from hibernation. This item allows you to enable/ disable Intel Rapid Start Technology. ▶ USB Configuration Press to enter the sub-menu. ▶ USB Controller This item allows you to enable/ disable the integrated USB 2.0 controller. ▶ Legacy USB Support Enable or disable support for USB keyboards, mice and floppy drives. You will be able to use these devices with operating systems that do not support USB. 2-7 Chapter 2 ▶ HD Audio Controller This item allows you to enable/ disable the HD audio controller. BIOS Setup ▶ Super IO Configuration Press to enter the sub-menu. ▶ Serial(COM) Port 0 Configuration Press to enter the sub-menu. ▶ Serial (COM) Port0 This item allows you to enable/ disable the serial port. ▶ Serial (COM) Port0 Settings Select an address and corresponding interrupt for the serial port. ▶ Hardware Monitor Press to enter the sub-menu. ▶ CPU Smart Fan Target Controls CPU fan speed automatically depending on the current temperature and to keep it with a specific range. If the current CPU temperature reaches the target value, the smart fan function will be activated. ▶ SYS Fan1/ 2 Control These items allow users to select how percentage of speed for the SYSFAN1/ 2. ▶ CPU/ System Temperature, CPU FAN/ SYS FAN 1/ 2 Speed These items show the current status of all of the monitored hardware devices/ components such as CPU temperature/ system temperature and all fans’ speeds. ▶ Intel(R) Smart Connect Configuration Press to enter the sub-menu. ▶ Intel(R) Smart Connect Technology This feature can update applications (ex. email and social networks) by periodically waking your system from sleep mode. And you do not have to wait for the applications to update when you wake up the system. [Enabled] Enables Intel smart connect technology. [Disabled] Disables Intel smart connect technology. ▶ Power Management Setup Press to enter the sub-menu. ▶ EuP 2013 Energy Using Products Lot 6 2013 (EUP) reduces power consumption when system is off or in standby mode. Note: When enabled, the system will not support RTC wake up event functions. ▶ Restore after AC Power Loss This item specifies whether your system will reboot after a power failure or interrupt occurs. Settings are: [Power Off] Always leaves the computer in the power off state. [Power On] Always leaves the computer in the power on state. [Last State] Restore the system to the status before power failure or interrupt occurred. 2-8 MS-7752 ▶ Windows 8 Configuration Press to enter the sub-menu. ▶ Windows 8 Feature When enabled, the system will switch to the UEFI mode to meet the Windows 8 logo requirement. Before enabling this item, please make sure all installed devices & utilities (hardware & software) meet the Windows 8 system requirements. [Enabled] Enables the Windows 8 support. [Disabled] Disables the Windows 8 support. ▶ Fast Boot This item will only be available When "MSI Fast Boot" is disabled. [Enabled] Enables the Windows 8 Fast Boot function and some items will be showed up for users to set the Windows 8 Fast Boot events. [Disabled] Disables the Windows 8 Fast Boot function. ▶ USB Support This item appears when “Fast Boot” is enabled. [Disabled] Disables all initializations of USB devices during POST for faster boot time. [Full Initial] Enables all initializations of USB devices during POST. It will extend the boot time. ▶ PS2 Devices Support This item appears when “Fast Boot” is enabled. [Disabled] Disables the PS2 devices during POST for faster boot time. [Enabled] Enables the PS2 devices. It will extend the boot time. ▶ SATA Device Support This item appears when “Fast Boot” is enabled. [Disabled] Disables the SATA devices during POST for faster boot time. [Enabled] Enables the SATA devices. It will extend the boot time. ▶ Internal GOP Configuration This sub-menu shows the related GOP information. ▶ Secure Boot Press to enter the sub-menu. This sub-menu allows you to set the related secure boot settings and keys of Windows to prevent the unauthorized access. ▶ Wake Up Event Setup Press to enter the sub-menu. ▶ Wake Up Event By Setting to [BIOS] activates the following fields, and use the following fields to set the wake up events. Setting to [OS], the wake up events will be defined by OS. 2-9 Chapter 2 ▶ MSI Fast Boot MSI Fast Boot function provides the optimal fast boot performance. [Enabled] Enables the MSI Fast Boot function. And the following related "Fast Boot" items will be disabled and fixed. [Disabled] Disables the MSI Fast Boot function. BIOS Setup ▶ Resume By RTC Alarm The field is used to enable or disable the feature of booting up the system on a scheduled time/date. ▶ Date/ HH:MM:SS If Resume By RTC Alarm is set to [Enabled], the system will automatically resume (boot up) on a specific date/hour/minute/second specified in these fields (using the <+> and <-> to select the date & time settings). ▶ Resume By PCI-E Device When set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PCIe device. ▶ Resume From S3 by USB Device The item allows the activity of the USB device to wake up the system from S3 (Suspend to RAM) sleep state. ▶ Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard These items determine whether the system will be awakened from what power saving modes when input signal of the PS/2 mouse/ keyboard is detected. 2-10 MS-7752 Boot ▶ Full Screen Logo Display This item enables this system to show the company logo on the boot-up screen. [Enabled] Shows a still image (logo) on the full screen at boot. [Disabled] Shows the POST messages at boot. ▶ Boot mode select This item determines if the system boot from Legacy or UEFI architecture rely on the requirement of OS installation. == FIXED BOOT ORDER Priorities== ▶ Hard Disk Drive BBS Priorities/ CD/DVD ROM Drive BBS Priorities/ USB HardDisk Drive BBS Priorities/ UEFI Boot Drive BBS Priorities ▶ Boot Option #1~#13 These items are used to prioritize the installed Hard Disk Drive/ CD/DVD ROM Drive/ USB HardDisk drives/ UEFI boot drives. Save & Exit ▶ Discard Changes and Exit Use this item to abandon all changes and exit setup. ▶ Save Changes and Reboot Use this item to save changes and reset the system. ▶ Save Changes Use this item to save changes. ▶ Discard Changes Use this item to abandon all changes. ▶ Restore Defaults Use this item to load the optimized default values set by the BIOS vendor. == Boot Override == The installed storage devices will appear on this menu, you can select one of them be a boot device. ▶ Built-in EFI Shell Use this item to enter the EFI Shell. 2-11 Chapter 2 ▶ Boot Option #1~#13 These items are used to prioritize the installed boot devices. BIOS Setup OC Important • Overclocking your PC manually is only recommended for advanced users. • Overclocking is not guaranteed, and if done improperly, can void your warranty or severely damage your hardware. • If you are unfamiliar with overclocking, we advise you to use OC Genie for easy overclocking. ▶ Current CPU / DRAM Frequency These items show the current clocks of CPU and Memory speed. Read-only. ▶ CPU Base Frequency [10KHz] Allows you to set the CPU Base clock (in 10KHz increments). You may overclock the CPU by adjusting this value. Please note that overclocking behavior and stability is not guaranteed. ▶ Adjust CPU Ratio Controls the multiplier that is used to determine internal clock speed of the processor. This feature can only be changed if the processor supports this function. ▶ Adjusted CPU Frequency It shows the adjusted CPU frequency. Read-only. ▶ Adjust CPU Ratio in OS Enable this item to allow CPU ratio changes in the OS by using MSI Control Center. ▶ Internal PLL Overvoltage This item is used to adjust the PLL voltage. 2-12 MS-7752 ▶ EIST Enhanced Intel SpeedStep technology allows you to set the performance level of the microprocessor whether the computer is running on battery or AC power. This field only appears with installed CPUs that support this technology. ▶ Intel Turbo Boost Enables or disables Intel Turbo Boost which automatically boosts CPU performance above rated specifications (when applications requests the highest performance state of the processor). ▶ OC Genie Function Control OC Genie function will over-clock the CPU settings to optimal performance automatically. [By BIOS Options] Determines whether the OC Genie function is enabled by BIOS. [By Onboard Button] Determines whether the OC Genie function is enabled by onboard OC Genie button. ▶ My OC Genie This item is used to select whether OC Genie parameters are customized by user. Setting to [MSI] OC Genie will use default OC related parameters to overclock the system. Selecting [Customize] allows you to configure the following related “My OC Genie option” sub-menu manually for OC Genie. ▶ My OC Genie option Press to enter the sub-menu. ▶ Customize CPU Ratio This item allows you to specific the CPU ratio for OC Genie function. ▶ My GT Overclock This item allows you to enable/ disable the overclocking of integrated graphics for OC Genie function. ▶ GT Ratio This item allows you to specific the GT ratio for OC Genie function. ▶ Adjusted my GT Ratio It shows the iGPU frequency when OC Genie is started. Read-only. ▶ Customize DRAM Frequency This item allows you to specific the DRAM frequency for OC Genie function. ▶ Adjusted My DRAM Frequency It shows the adjusted DRAM frequency when OC Genie is started. Read-only. ▶ Extreme Memory Profile (X.M.P) This item is used to enable/disable the Intel Extreme Memory Profile (XMP) when OC Genie is started. 2-13 Chapter 2 ▶ Enhanced Turbo [Enabled] Frequencies of all CPU cores will be increased to the maximum in Intel Turbo Boost mode. [Disabled] Disables this function. BIOS Setup ▶ My OC Genie Intel C-State This item is used to enable/disable the Intel C-State when OC Genie is started. ▶ My OC Genie Package C State limit This field allows you to specific the C-state mode for OC Genie function. ▶ My OC Genie Long duration power limit This field allows you to customize Long duration power limit for OC Genie function. ▶ My OC Genie Long duration maintained This field allows you to customize Long duration maintained for OC Genie function. ▶ My OC Genie Short duration power limit This field allows you to customize Short duration power imit for OC Genie function. ▶ My CPU Core Voltage/ My OC Genie CPU I/O Voltage/ My OC Genie DRAM Voltage/ My OC Genie GPU Voltage These items are used to specific the voltage of CPU, Memory, GPU and chipset for OC Genie function. ▶ Current CPU Core Voltage/ Current CPU I/O Core Voltage/ Current DRAM Voltage/ Current GPU Voltage These items show current CPU/ CPU I/O/ DRAM/ GPU voltage. Read-only. ▶ DRAM Reference Clock This item allows you to specific the DRAM Reference Clock for CPU. Please note the overclocking behavior is not guaranteed. ▶ DRAM Frequency This item allows you to adjust the DRAM frequency. Please note the overclocking behavior is not guaranteed. ▶ Adjusted DRAM Frequency It shows the adjusted DRAM frequency. Read-only. ▶ DRAM Timing Mode Select whether DRAM timing is controlled by the SPD (Serial Presence Detect) EEPROM on the DRAM module. Setting to [Auto] enables DRAM timings and the following “Advanced DRAM Configuration” sub-menu to be determined by BIOS based on the configurations on the SPD. Selecting [Link] or [Unlink] allows users to configure the DRAM timings for each channel and the following related “Advanced DRAM Configuration” sub-menu manually. ▶ Advanced DRAM Configuration Press to enter the sub-menu. ▶ Command Rate This setting controls the DRAM command rate. ▶ tCL Controls CAS latency which determines the timing delay (in clock cycles) of starting a read command after receiving data. ▶ tRCD Determines the timing of the transition from RAS (row address strobe) to CAS (column address strobe). The less clock cycles, the faster the DRAM performance. 2-14 MS-7752 ▶ tRP Controls number of cycles for RAS (row address strobe) to be allowed to pre-charge. If insufficient time is allowed for RAS to accumulate before DRAM refresh, the DRAM may fail to retain data. This item applies only when synchronous DRAM is installed in the system. ▶ tRAS Determines the time RAS (row address strobe) takes to read from and write to memory cell. ▶ tWR Determines minimum time interval between end of write data burst and the start of a pre-charge command. Allows sense amplifiers to restore data to cell. ▶ tWTR Determines minimum time interval between the end of write data burst and the start of a column-read command; allows I/O gating to overdrive sense amplifies before read command starts. ▶ tRRD Specifies the active-to-active delay of different banks. ▶ tRTP Time interval between a read and a precharge command. ▶ tFAW This item is used to set the tFAW (four activate window delay) timing. ▶ tWCL This item is used to set the tWCL (Write CAS Latency) timing. ▶ tCKE This item is used to set the Pulse Width for DRAM module. ▶ tRTL This item is used to set Round Trip Latency settings. ▶ Advanced Channel 1/ 2 Timing Configuration Press to enter the sub-menu. And you can set the advanced memory timing for each channel. ▶ GT OverClocking This item allows you to enable/ disable the overclocking of integrated graphics. ▶ GT Ratio This setting controls the ratio of integrated graphics frequency to enable the integrated graphics to run at different frequency combinations. ▶ Adjusted GT Frequency It shows the iGPU frequency. Read-only. 2-15 Chapter 2 ▶ tRFC This setting determines the time RFC takes to read from and write to a memory cell. BIOS Setup ▶ Spread Spectrum This function reduces the EMI (Electromagnetic Interference) generated by modulating clock generator pulses. Important • If you do not have any EMI problem, leave the setting at [Disabled] for optimal system stability and performance. But if you are plagued by EMI, select the value of Spread Spectrum for EMI reduction. • The greater the Spread Spectrum value is, the greater the EMI is reduced, and the system will become less stable. For the most suitable Spread Spectrum value, please consult your local EMI regulation. • Remember to disable Spread Spectrum if you are overclocking because even a slight jitter can introduce a temporary boost in clock speed which may just cause your overclocked processor to lock up. ▶ Vdroop Offset Control This item is used to select the CPU core Vdroop offset control mode. ▶ Digital Compensation Level This item is used to select the current compensation speed when the MOS phases be changed. For overclocking or full-loading of system, it is recommended this field set to [high]. Please note that overclocking behavior and stability is not guaranteed. ▶ CPU Core OCP Expander This item is used to expand the limitation of CPU Over Current Protection. The higher expanding value indicates less CPU protection. So please adjust the CPU voltage carefully if needed. ▶ CPU Core Switching Frequency This item allows you to specific the CPU core switching frequency. ▶ CPU Core Voltage/ DRAM Voltage/ GPU Voltage/ System Agent Voltage (SA)/ CPU PLL Voltage/ DDR_VREF_CA_A/ DDR_VREF_CA_B/ DDR_VREF_DA_A/ DDR_VREF_ DA_B/ PCH 1.05 These items are used to adjust the voltage of CPU, Memory, GPU and chipset. ▶ Current CPU Core Voltage/ Current CPU I/O Core Voltage/ Current DRAM Voltage/ Current GPU Voltage These items show current CPU/ CPU I/O/ DRAM/ GPU voltage. Read-only. ▶ Overclocking Profiles Press to enter the sub-menu. ▶ Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Press to enter the sub-menu. ▶ Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Give a name by typing in this item. ▶ Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Save the current overclocking settings to ROM for selected profile. 2-16 MS-7752 ▶ Load/ Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Load/ Clear the stored profile settings from ROM. ▶ OC Profile Save to USB Save the current overclocking settings to USB drive. ▶ OC Profile Load from USB Load the stored settings from USB drive. ▶ CPU Technology Support Press to enter the sub-menu. The sub-menu shows the installed CPU technologies. Read only. ▶ MEMORY-Z Press to enter the sub-menu. This sub-menu highlights all the settings and timings of your DIMMs. This information will vary by model and is read-only. You can also access this information at any time by pressing [F5]. Press to enter the sub-men ▶ DIMM1~4 Memory SPD Press to enter the sub-menu. The sub-menu displays the informations of installed memory. ▶ CPU Features Press to enter the sub-menu. ▶ Hyper-threading The processor uses Hyper-threading technology to increase transaction rates and reduces end-user response times. The technology treats the two cores inside the processor as two logical processors that can execute instructions simultaneously. In this way, the system performance is highly improved. If you disable the function, the processor will use only one core to execute the instructions. Please disable this item if your operating system doesn’t support HT Function, or unreliability and instability may occur. ▶ Active Processor Cores This item allows you to select the number of active processor cores. ▶ Limit CPUID Maximum It is designed to limit the listed speed of the processor to older operating systems. ▶ Execute Disable Bit Can prevent certain classes of malicious “buffer overflow” attacks where worms can try to execute code to damage your system. It is recommended you keep this enabled always. ▶ Intel Virtualization Tech Enhances virtualization and allows the system to act as multiple virtual systems. See Intel’s official website for more information. 2-17 Chapter 2 ▶ CPU Specifications Press to enter the sub-menu. This sub-menu highlights all the key features of your CPU. The information will vary by model and is read-only. You can also access this information at any time by pressing [F4]. Press to enter the sub-menu. BIOS Setup ▶ Intel VT-D Tech This item is used to enable/disable the Intel VT-D technology. For further information please refer to Intel’s official website. ▶ Power Technology This item allows you to select the Intel Dynamic Power technology mode. ▶ C1E Support Enable system to reduce CPU power consumption while idle. Not all processors support Enhanced Halt state (C1E). ▶ OverSpeed Protection Monitors current CPU draw as well as power consumption; if it exceeds a certain level, the processor automatically reduces its clock speed. For overclocking, it is recommended this feature is disabled. ▶ Intel C-State C-state is a power management state that detects when the system is idle and lowers power consumption accordingly. ▶ Package C State limit This field allows you to select a C-state mode. ▶ Long duration power limit (W) This field allows you to adjust the TDP power limit for the long duration. ▶ Long duration maintained (s) This field allows you to adjust the maintaining time for long duration power limit. ▶ Short duration power limit (W) This field allows you to adjust the TDP power limit for the short duration. ▶ Primary/ Secondary plane turbo power limit (W) These fields allow you to adjust the TDP limit for the primary/ secondary plane turbo. ▶ 1/2/3/4-Core Ratio Limit These fields show the 1/2/3/4 core ratio limit of CPU. 2-18 MS-7752 ECO Chapter 2 Important Once you click the “ECO” button in the pre-set area, some items in ECO menu will be fixed and un-adjustable. ▶ EuP 2013 Energy Using Products Lot 6 2013 (EUP) reduces power consumption when system is off or in standby mode. Note: When enabled, the system will not support RTC wake up event functions. ▶ CPU Phase Control These items allow you to enable (Auto)/ disable (disabled) the CPU power phase switch feature to reach the best power saving. ▶ Motherboard LED Control This item allows you to enable (Auto)/ disable (disabled) the motherboard phase LED. ▶ C1E Support To enable this item to reduce the CPU power consumption while idle. Not all processors support Enhanced Halt state (C1E). ▶ Intel C-State C-state is a power management state that detects when the system is idle and lowers power consumption accordingly. ▶ Package C State limit This field allows you to select a C-state mode. ▶ CPU Core Voltage/ CPU I/O Voltage/ GPU Voltage/ DRAM Voltage/ 3.3V/ 5V/ 12V These items show the amperages. Read only. 2-19 BIOS Setup BROWSER Please install the MSI "Winki" application first in the Windows operating system with the MSI Driver Disc before using the browser. Then you can click the BROWSER to access the Internet, e-mail and instant messaging. Installing Winki To install Winki, follow the steps below: 1. Power on your computer and enter Windows operating system. 2. Insert MSI Driver Disc into the optical drive. The setup screen will automatically appear. 3. Click Driver tab. 4. Click OTHERS button. 5. Select Winki to start installing. 6. When finished, restart your computer. 2-20 MS-7752 UTILITIES Chapter 2 ▶ HDD Backup Hard disk storage backups and restoring is one of the most common and important tasks. Use this utility to create an image of your HDD partitions and re-load them when necessary. Important The HDD Backup can’t back up (/restore) image to (/from) a partition where itself was installed, so it’s strongly recommended to divide HDD into 2 partitions at least (1st for OS; 2nd for data). For HDD with single partition only, the requirements for HDD Backup are: 1. An additional partition from another HDD (ex. USB HDD) for HDD Backup to back up (/restore) image to (/from) it. 2. Executing Winki stored in USB flash drive/ MSI Driver Disc by pressing to choose boot device during POST. ▶ Live Update This tool can detect and update your BIOS online so that you won’t need to spend time searching manually. Important HDD Backup and Live Update request Winki, please install the "Winki" software application from MSI Driver Disc in Windows first. And then you can access these two utilities by clicking their respective buttons. 2-21 BIOS Setup ▶ M-Flash ▶ BIOS Boot Function This allows you to enable/ disable the system to boot from the BIOS file inside USB drive (FAT/ 32 format only). ▶ Select UEFI file to boot from When the BIOS Boot function as sets to [Enabled], this item is selectable. This item allows to select particular BIOS file from the USB/ Storage (FAT/ 32 format only) drive. And the system will boot from selected BIOS file. ▶ Save current UEFI rom to file Please setup a specific folder in specific USB/ Storage drive to save BIOS file from BIOS ROM chip data. Note: it only supports FAT/ 32 file system drive. ▶ Select UEFI file to flash This item allows you to select a particular BIOS file from the USB/ Storage (FAT/ 32 format only) drive for updating BIOS. 2-22 MS-7752 Updating the BIOS with Live Update This section tells you how to update the BIOS by using the Live Update utility before entering Operating System. Live Update will update the BIOS automatically when connecting to the Internet. To update the BIOS with the Live Update utility: 1. Click Live Update button installed). on the BIOS UTILITIES menu. (The Winki must be 2. Setup the connection by click the setting button 3. Click the next button if necessary. . 5. Click the confirm button to update the BIOS. Important Do not unplug or shut off your system during BIOS Flash. Incorrect BIOS flashing can cause the motherboard to not POST. Please ensure you have the correct version and model of your motherboard BIOS when updating. 2-23 Chapter 2 4. Live Update will automatically detect the version of BIOS and download the appropriate file. BIOS Setup SECURITY ▶ Administrator Password Set the administrative password that will be required to enter the BIOS. ▶ User Password Set the user password that will be required to enter the operating system. Important When selecting the Administrative / User Password items, a password box will appear on the screen. Type the password then press . The password typed now will replace any previous set password from CMOS memory. You will be prompted to confirm the password. You may also press to abort the selection. To clear a set password, press when you are prompted to enter a new password. A message will confirm the password is being disabled. Once the password is disabled, you can enter the setup and OS without authorization. ▶ U-Key Enable or disable USB driver device as key. This requires the USB device to be plugged in for access to the computer.. ▶ Make U-Key at When the “U-Key” as sets to [Enabled], this item is selectable. This item allows you to specify the USB drive. ▶ Chassis Intrusion Configuration Press to enter the sub-menu. ▶ Chassis Intrusion Enables or disables the feature of recording the chassis intrusion status and issuing a warning message if opened. To clear the warning logs, set the field to [Reset]. The setting of the field will return to [Enabled] later. 2-24 Appendix A Realtek Audio The Realtek audio provides 10-channel DAC that simultaneously supports 7.1 sound playback and 2 channels of independent stereo sound output (multiple streaming) through the Front-Out-Left and Front-Out-Right channels. Realtek Audio Installing the Realtek HD Audio Driver You need to install the HD audio driver for Realtek audio codec to function properly before you can get access to 2-, 4-, 6-, 8- channel or 7.1+2 channel audio operations. Follow the procedures described below to install the drivers for different operating systems. Installation for Windows® For Windows® XP, you must install Windows® XP Service Pack3 or later before installing the driver. The following illustrations are based on Windows® 7 environment and could look slightly different if you install the drivers in different operating systems. 1. Insert the application DVD into the DVD-ROM drive. The setup screen will automatically appear. 2. Click Driver tab. 3. Click AUDIO button. Click here 4. Select Realtek HD Audio Drivers to start installing the drivers. 5. Click Next to install the Realtek High Definition Audio Driver. 6. Follow the on-screen instructions to install drivers. 7. Click Finish to restart the system. Important The HD Audio Configuration software utility is under continuous update to enhance audio applications. Hence, the program screens shown here in this section may be slightly different from the latest software utility and shall be held for reference only. A-2 MS-7752 Software Configuration After installing the audio driver, the “Realtek HD Audio Manager” icon will appear at the notification area (lower right of the screen). You may double click the icon and the GUI will pop up accordingly. double click the icon Software panel overview The following figure describes the function of the Realtek HD Audio Manager panel. Device Selection Volume Adjustment Application Enhancement Jack status panel A-3 Appendix A It is also available to enable the audio driver by clicking the Realtek HD Audio Manager from the Control Panel. Realtek Audio ■ Device Selection Here you can select a audio output source to change the related options. The “check” sign (in orange) indicates the devices as default. ■ Volume Adjustment You can control the volume or balance the right/left side of the speakers that you plugged in front or rear panel by adjust the bar. ■ Application Enhancement The array of options will provide you a complete guidance of anticipated sound effect for both output and input device. ■ Jack status panel This panel depicts all render and capture devices currently connected with your computer. Auto popup dialog When you plug into the device at the jack, a dialogue window will pop up asking you which device is current connected. As you know, each jack corresponds to its default setting, you can refer to the next section “Hardware Default Setting”. A-4 MS-7752 Hardware Default Setting The following diagrams are audio back panel default setting. ■ Backpanel audio jacks to 2-channel speakers diagram Fro nt Appendix A ■ Backpanel audio jacks to 4-channel speakers diagram Fro nt Rea r A-5 Realtek Audio ■ Backpanel audio jacks to 6-channel speakers diagram Fro nt Cen ■ ter ubw Rea oof r er Backpanel audio jacks to 8-channel speakers diagram Fro nt Cen ter S id A-6 &S &S eS ubw urro Rea oof er und r Appendix B Intel RAID This appendix will assist users in configuring and enabling RAID functionality and accelerating system on platforms Intel RAID Introduction The motherboard comes with the Intel RAID controller that allows you to configure SATA hard drives as RAID sets. SATA hard drives deliver blistering transfer speeds up to 6 Gb/s. Serial ATA uses long, thin cables, making it easier to connect your drive and improving the airflow inside your PC. The most outstanding features are: 1. Supports 3 Gb/s or 6 Gb/s transfers with CRC error checking. 2. Supports Hot-plug-n-play feature. 3. Data handling optimizations including tagged command queuing, elevator seek and packet chain command. Intel® RAID controller offers RAID level 0 (Striping), RAID level 1 (Mirroring and Duplexing), RAID level 5 (Block Interleaved Distributed Parity), RAID level 10 (A Stripe of Mirrors) , Intel® Rapid Storage Technology. RAID 0 breaks the data into blocks which are written to separate hard drives. Spreading the hard drive I/O load across independent channels greatly improves I/O performance. RAID 1 provides data redundancy by mirroring data between the hard drives and provides enhanced read performance. RAID 5 Provides data striping at the byte level and also stripe error correction information. This results in excellent performance and good fault tolerance. Level 5 is one of the most popular implementations of RAID. RAID 10 Not one of the original RAID levels, multiple RAID 1 mirrors are created, and a RAID 0 stripe is created over these. Intel® Rapid Storage Technology is the advanced ability for two RAID volumes to share the combined space of two hard drives being used in unison. Intel® Rapid Storage Technology utilizes RAID 1 functionality to copy data from a designated Master drive to a designated Recovery drive. The size of the Master drive must be less than or equal to the size of the Recovery drive. When a Recovery volume is created, complete capacity of the Master drive will be used as the Master volume. Only one Recovery Volume can exist on a system. There are 2 methods of updating the data on the Master to the Recovery drive. They are Continuous Update Policy and On Request Update Policy. Important The least number of hard drives for RAID 0, RAID 1, Recovery or Matrix mode is 2. The least number of hard drives for RAID 10 mode is 4. And the least number of hard drives for RAID 5 mode is 3. All the information/ volumes/ pictures listed in your system might differ from the illustrations in this appendix. B-2 MS-7752 Using Intel Rapid Storage Technology Option ROM The Intel Rapid Storage Technology Option ROM should be integrated with the system BIOS on all motherboards with a supported Intel chipset. The Intel Rapid Storage Technology Option ROM is the Intel RAID implementation and provides BIOS and DOS disk services. Please use + keys to enter the “Intel® RAID for Serial ATA” status screen, which should appear early in system boot-up, during the POST (PowerOn Self Test). Also, you need to enable the RAID function in BIOS to create, delete and reset RAID volumes. Creating, Deleting and Resetting RAID Volumes: The Serial ATA RAID volume may be configured using the RAID Configuration utility stored within the Intel RAID Option ROM. During the Power-On Self Test (POST), the following message will appear for a few seconds. Important The “Device Model”, “Serial #” and “Size” in the following example might be different from your system. Appendix B RAID Volumes None defined. Physical Disks: Port Device Model 1 XXXXXXXXXXXXX 2 XXXXXXXXXXXXX Serial # XXXXXXXXXXXXX XXXXXXXXXXXXX Size XXX.XGB XXX.XGB Type/Status(Vol ID) Non-RAID Disk Non-RAID Disk Press to enter Configuration Utility.. After the above message shows, press and keys simultaneously to enter the Intel Rapid Storage Technology Option ROM. Important The following procedure is only available with a newly-built system or if you are reinstalling your OS. It should not be used to migrate an existing system to RAID. B-3 Intel RAID After pressing the and keys simultaneously, the following window will appear: [ [ MAIN MAIN MENU ] ] 1. 2. 3. 4. Recovery Volume Options Create RAID Volume 5. Acceleration Options Delete RAID Volume 6. Exit Reset Disks to Non-RAID [ DISK / VOLUME INFORMATION ] RAID Volumes : None defined. Physical Devices : Port Device Model 1 XXXX-XXXXXXXX 2 XXXX-XXXXXXXX [ ↑↓] - Select Serial # XXXXXXXXXXXXXX XXXXXXXXXXXXXX [ESC] - Exit Size Type/Status (Vol ID) XXX.XGB Non-RAID Disk XXX.XGB Non-RAID Disk [ENTER] - Select Menu ■ Create RAID Volume 1. Select option 1 “Create RAID Volume” and press key. The following screen appears. Then in the Name field, specify a RAID Volume name and then press the or key to go to the next field. 2. Use the arrow keys to select the RAID level best suited to your usage model in RAID Level. [ CREATE VOLUME MENU ] Name : RAID Level : Disks : Strip Size : Capacity : Sync : Volume0 RAID1(Mirror) Select Disks N/A XXX.X GB N/A Create Volume [ HELP ] RAID 1 : Mirrors data (redundancy) . [ ↑↓] - Change B-4 [TAB] - Next [ESC] - Previous Menu [ENTER] - Select MS-7752 3. In the Disk field, press key and use key to select the disks you want to create for the RAID volume, then click key to finish selection. This field will become available according to the selected RAID level. 4. Then select the strip size for the RAID array by using the “upper arrow” or “down arrow” keys to scroll through the available values, and pressing the key to select and advance to the next field. The available values range from 4KB to 128 KB in power of 2 increments. The strip size should be chosen based on the planned drive usage. Here are some typical values: RAID0 -128KB / RAID10 - 64KB / RAID5 - 64KB. This field will become available according to the selected RAID level. 5. Then select the capacity of the volume in the Capacity field. The default value is the maximum volume capacity of the selected disks. [ CREATE VOLUME MENU ] Volume0 RAID1(Mirror) Select Disks N/A XXX.X GB N/A Create Volume Appendix B Name : RAID Level : Disks : Strip Size : Capacity : Sync : [ HELP ] The default value indicates the maximum capacity using the selected disks. Entering a lower capacity allows you to create a second volume on these disks. [ ↑↓] - Change [TAB] - Next [ESC] - Previous Menu [ENTER] - Select Important Since you want to create two volumes, this default size (maximum) needs to be reduced. Type in a new size for the first volume. As an example: if you want the first volume to span the first half of the two disks, re-type the size to be half of what is shown by default. The second volume, when created, will automatically span the remainder of two hard drives. B-5 Intel RAID 6. Go to the Create Volume field and press , the following screen appears for you to confirm if you are sure to create the RAID volume. Press to continue. [ CREATE VOLUME MENU ] Name : RAID Level : Disks : Strip Size : Capacity : Sync : Volume0 RAID1(Mirror) Select Disks N/A XXX.X GB N/A Create Volume WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want[ toHELP create] this volume? (Y / N) : Press ENTER to create the specified volume. [ ↑↓] - Change [TAB] - Next [ESC] - Previous Menu [ENTER] - Select 7. Then the following screen appears to indicate that the creation is finished. [ [ MAIN MAIN MENU ] ] 1. 2. 3. 4. Recovery Volume Options Create RAID Volume 5. Acceleration Options Delete RAID Volume 6. Exit Reset Disks to Non-RAID [ DISK / VOLUME INFORMATION ] RAID Volumes : ID Name 0 Volume0 Physical Devices : Port Device Model 1 XXXX-XXXXXXXX 2 XXXX-XXXXXXXX [ ↑↓] - Select B-6 Level RAID1(Mirror) Serial # XXXXXXXXXXXXXX XXXXXXXXXXXXXX [ESC] - Exit Strip N/A Size Status XXX.XGB Normal Bootable Yes Size Type/Status (Vol ID) XXX.XGB Member Disk(0) XXX.XGB Member Disk(0) [ENTER] - Select Menu MS-7752 ■ Delete RAID Volume Here you can delete the RAID volume, but please be noted that all data on RAID drives will be lost. Important If your system currently boots to RAID and you delete the RAID volume in the Intel RAID Option ROM, your system will become un-bootable. Select option 2 Delete RAID Volume from the main menu screen and press key to select a RAID volume for deletion. Then press key to delete the selected RAID volume. The following screen appears. [ DELETE VOLUME MENU ] Name Volume0 Level RAID1(Mirror) Drives 2 Capacity XXX.XGB Status Normal Bootable Yes Appendix B [ DELETE VOLUME VERIFICATION ] ALL DATA IN THE VOLUME WILL BE LOST! (This does not apply to Recovery volumes) HELP “Volume0”? ] Are you sure you want to[ delete (Y / N) : Deleting a volume will reset the disks to non-RAID. WARNING : ALL DISK DATA WILL BE DELETED. (This does not apply to Recovery volumes) [ ↑↓] - Select [ESC] - Previous Menu [DEL] - Delete Volume Press key to accept the volume deletion. B-7 Intel RAID ■ Reset Disks to Non-RAID Select option 3 Reset Disks to Non-RAID and press to delete the RAID volume and remove any RAID structures from the drives. The following screen appears: [ MAIN MENU ] 4. Recovery Volume Options Create RAID Volume 4. ] Recovery Volume Options Delete RAID Volume [ RESET RAID DATA 5. remove Exit its RAID structures Resetting RAID disk will VOLUME INFORMATION and revert [ it DISK to a / non-RAID disk. ] 1. 2. RAID VolumesWARNING : : Resetting a disk causes all data on the disk to be lost. None defined. (This does not apply to Recovery volumes) PortDevices Drive : Model Serial # Physical 1 XXXX-XXXXXXXX Port Device Model Serial # XXXXXXXXXXXXXX 2 XXXX-XXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX 1 XXXX-XXXXXXXX 2 XXXX-XXXXXXXX XXXXXXXXXXXXXX Size Status XXX.XGB Member Disk Size Type/Status (Vol ID) XXX.XGB MemberDisk Disk XXX.XGB Non-RAID XXX.XGB Non-RAID Disk Select the disks that should be reset. [ ↑↓] - Previous/ Next [ ↑↓] - Select [SPACE] - Selects [ESC] - Exit [ENTER] - Selection Complete [ENTER] - Select Menu Use the key to select the disks and press key. A confirmation sentence will appear below, and then press key to accept the selection. Important • You will lose all data on the RAID drives and any internal RAID structures when you perform this operation. • Possible reasons to “Reset Disks to Non-RAID” could include issues such as incompatible RAID configurations or a failed volume or failed disk. B-8 MS-7752 ■ Recovery Volume Options Select option 4 Recovery Volume Options and press to change recovery volume mode. The following screen appears: [ RECOVERY VOLUME OPTIONS ] 1. 2. Enable Only Recovery Disk Enable Only Master Disk [ HELP ] Enable Only Recovery Disk - enables recovery disk if available and disables master disk. Enable Only Master Disk - enables master disk if available and disables recovery disk. Actions will result in change from Continuous Update mode to On-Request. [ESC] - Previous Menu [ENTER] - Select Recovery mode will change from Continuous Update to On-Request after you enable “Only Recovery Disk” or “Only Master Disk”. B-9 Appendix B [ ↑↓] - select Intel RAID Installing Driver ■ New Windows 7/ Windows 8/ Windows XP Installation The following details the installation of the drivers while installing operating system. 1. When you start installing Windows XP, you may encounter a message stating, “Setup could not determine the type of one or more mass storage devices installed in your system”. If this is the case, then you are already in the right place and are ready to supply the driver. If this is not the case, then press F6 when prompted at the beginning of Windows setup. 2. Press the “S” key to select “Specify Additional Device”. 3. You should be prompted to insert a floppy disk containing the Intel® RAID driver into the A: drive. Note: For Windows XP, you can use the USB floppy drive only. For Windows 7/ 8 you can use CD/ DVD/ USB drive. Important Please follow the instruction below to make an “Intel® RAID Driver” for yourself. • Insert the MSI DVD into the DVD-ROM drive. • Click the “Browse CD” on the Setup screen. • Copy all the contents in \\Storage\Intel\PCH 7\f6flpy-x86 or f6flpy-x64 to a formatted floppy diskette. • The driver diskette for Intel® RAID Controller is done. 4. For Windows 7/ 8: During the Operating system installation, after selecting the location to install Windows 7 click on “Load Driver” button to install a third party SCSI or RAID driver. 5. When prompted, insert the floppy disk or media (CD/DVD or USB) you created in step 3 and press Enter. 6. You should be shown a list of available SCSI Adapters. 7. Select the appropriate Intel RAID controller and press ENTER. 8. The next screen should confirm that you have selected the Intel® RAID controller. Press ENTER again to continue. 9. You have successfully installed the Intel® Rapid Storage Technology driver, and Windows setup should continue. 10. Leave the disk in the floppy drive until the system reboots itself. Windows setup will need to copy the files from the floppy again after the RAID volume is formatted, and Windows setup starts copying files. B-10 MS-7752 ■ Existing Windows Driver Installation 1. Insert the MSI DVD into the DVD-ROM drive. 2. The DVD will auto-run and the setup screen will appear. 3. Under the Driver tab, click on Intel RAID Drivers. 4. The drivers will be automatically installed. ■ Confirming Windows Driver Installation 1. From Windows, open the Control Panel from My Computer followed by the System icon. 2. Choose the Hardware tab, then click the Device Manager tab. 3. Click the “+” in front of the SCSI and RAID Controllers hardware type. The driver Intel(R) SATA RAID Controller should appear. Appendix B B-11 Intel RAID Degraded RAID Array A RAID 1, RAID 5 or RAID 10 volume is reported as degraded when one of its hard drive members fails or is temporarily disconnected, and data mirroring is lost. As a result, the system can only utilize the remaining functional hard drive member. To re-establish data mirroring and restore data redundancy, refer to the procedure below that corresponds to the current situation. Missing Hard Drive Member 1. Make sure the system is powered off. 2. Reconnect the hard drive. 3. Reboot the system to Windows; the rebuild will occur automatically. Failed Hard Drive Member 1. Make sure the system is powered off. 2. Replace the failed hard drive with a new one that is of equal or greater capacity. 3. Reboot the system to Intel RAID Option ROM by press and keys simultaneously during the Power-On Self Test (POST). RAID Volumes ID Name 0 Volume0 Level RAID 1(Mirror) Physical Disks: Port Device Model 1 XXXXXXXXXXXXX 2 XXXXXXXXXXXXX Strip N/A Size XXX.XGB Serial # XXXXXXXXXXXXX XXXXXXXXXXXXX Status Degraded Size XXX.XGB XXX.XGB Bootable Yes Type/Status(Vol ID) Member Disk (0) Member Disk (0) Press to enter Configuration Utility.. 4. Select the port of the destination disk for rebuilding, and then press ENTER. [ MAIN MENU 1. 2. ] 4. Recovery Volume Options Create RAID Volume [ DEGRADED VOLUME DETECTED ] 4. Recovery Volume Options Delete RAID Volume “Degraded” volume and disk available for rebuilding detected. Selecting 5. Exit a disk initiates a rebuild. Rebuild completes in the operating system. [ DISK / VOLUME INFORMATION ] RAID Volumes : Select the port of the destination disk for rebuilding (ESC to exit): None defined. Port Drive Model Serial # Size 1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Physical Devices : Port Device Model Serial # Size Type/Status (Vol ID) 1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Disk [ ↑↓] - Previous/ Next [ENTER] - Select [ESC] - Exit 2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Disk [ ↑↓] - Select B-12 [ESC] - Exit [ENTER] - Select Menu MS-7752 5. Exit Intel RAID Option ROM, and then reboot to Windows system. 6. When prompted to rebuild the RAID volume, click ‘Yes’. 7. The Intel Rapid Storage Technology application will be launched. Right-click the new hard drive and select ‘Rebuild to this Disk’. The ‘Rebuild Wizard’ will be launched which will guide you through the process of rebuilding to the new hard drive. Appendix B B-13 Intel RAID System Acceleration (optional) Intel® Rapid Storage Technology use a SSD as a cache. Which can store frequently used data without having to use a slow virtual disk or depend on RAM. The SSD cache with the advantages of high-speed read/write and non-volatile memory to accelerate the system performance. Important Check your SSD manufacturer's website, upgrade firmware in order to support Intel® Rapid Storage Technology. Intel® Rapid Storage Technology can only work with RAID mode. Even though there is only one hard drive, you must set the SATA Mode to RAID in BIOS. The OS must be installed in the RAID ready disk in order to use the SSD caching. Follow these steps to enable system acceleration. If Windows has been installed in RAID mode, skip to the step 5. 1. Reboot and enter the BIOS steup. 2. Set the SATA Mode to RAID in BIOS. 3. Install Intel® RAID controller driver. Please refer to the section "Installing Driver". 4. Install Windows operating system. 5. Powered off. 6. Connect the SSD. 7. Reboot the system to Windows. 8. Insert the MSI DVD into the DVD-ROM drive. Click here 9. Click the “STORAGE” on the Setup screen. 10. Click the "Intel RAID Driver" to install Intel® Rapid Storage Technology application. B-14 MS-7752 11. Run Intel® Rapid Storage Technology application. 12. Click "Enable acceleration" under Accelerate. Click here 13. Select the acceleration options. Important You can click “More help on this page” or "More help" of the Intel® Rapid Storage Technology application to view more information. B-15 Appendix B 14. Click OK and reboot the system. The page refreshes and reports the new acceleration configuration in the Acceleration View. Intel RAID RST Synchronization (optional) If you are using Maximized mode as the Acceleration mode, the data on the hard disk is not always synchronized with the data in the SSD cache. In some situations, you may want to manually sync the disks for avoiding data loss. Follow these steps to sync manually. 1. Reboot system, during the Power-On Self Test (POST) press, press and keys simultaneously to enter the Intel Rapid Storage Technology Option ROM. 2. Select option 5 “Acceleration Options” and press key. The following screen appears. [ ACCELERATION OPTIONS ] Name DISK PORT 0 Type Non-RAID Disk Capacity Mode 153.4GB Maximized Status No Sync [ HELP ] Press 's' to synchronize data from the cache device to the Accelerated Disk/Volume. Press 'r' to remove the Disk/Volume Acceleration. WARNING: IT IS RECOMMENDED THAT YOU [ERFORM A SYNCHRONIZATION BEFORE REMOVING ACCELERATION. [ ↑↓] - Select [ESC] - Previous Menu 3. Press to synchronize data. [ SYNCHRONIZATION VERIFICATION ] 5. MAY Exit TAKE SEVERAL MINUTES. SYNCHRONIZING THE DATA / VOLUME INFORMATION [ DISK ] DO NOT INTERRUPT THE PROCESS! Are you sure you want to synchronize data to "DISK PORT 0"? (Y/N): 4. When prompted, pressto confirm. [ ACCELERATION OPTIONS ] Name DISK PORT 0 Type Non-RAID Disk Capacity Mode 153.4GB Maximized Status In Sync 5. Once synchronization is complete, the status will change to In Sync. B-16 Appendix C Install Windows XP Notes This chapter describes how to install Windows XP with IDE or AHCI mode. Install Windows XP Notes Installing Windows XP with IDE Mode You will fail and encounter a blue screen while installing Windows XP, because it is not natively supported to be installed in the storage device with AHCI mode. If you still prefer to install Windows XP as the operating system, please change the BIOS item as below. 1. Refer to Chapter 2 to access BIOS. 2. Go to SETTINGS → Integrated Peripherals → SATA Mode. 3. Set this item to IDE mode. 4. Go to SETTINGS → Save & Exit → Save changes and reboot. 5. Install the Windows XP operating system. C-2 MS-7752 Installing Windows XP with AHCI Mode If you prefer to install Windows XP as the operating system with AHCI mode, please prepare AHCI drivers for Windows XP in advanced. Creating a Intel AHCI Driver Disc Please follow the instruction below to make an “Intel® AHCI Driver” for yourself. ■ Insert the MSI DVD into the DVD-ROM drive. ■ Click the “Browse CD” on the Setup screen. ■ Copy all the contents from \\Storage\Intel\PCH 7\f6flpy-x86 or f6flpy-x64 to a formatted floppy diskette. ■ The driver diskette is done. Important You can download the driver from http://download3.msi.com/files/downloads/dvr_exe/intel7x_rst_floppy_mb.zip Installing the Windows XP Operating System: Please follow the below steps: 1. Access BIOS, set SATA Mode to AHCI mode, save, exit and reboot. 2. Ensure the USB Floppy Disk Drive is connected to the computer. 4. Insert the floppy disk containing the AHCI drivers into the floppy disk drive. 5. When the next screen appears, press the “S” key to specify an additional device. 6. From the provided list, select the Intel(R) 7 Series SATA AHCI Controller. 7. Follow the on-screen instructions to complete the installation. C-3 Appendix C 3. Install Windows XP. When Windows Setup screen appears a message “Press F6 if you need to install a third party SCSI or RAID driver....”, press “F6” key.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1.1-111 Instance ID : uuid:d2757235-7a29-4cb4-a576-70742d45d837 Document ID : adobe:docid:indd:670940e6-5969-11e2-b86a-a37ce233e602 Rendition Class : proof:pdf Derived From Instance ID : 670940e5-5969-11e2-b86a-a37ce233e602 Derived From Document ID : adobe:docid:indd:bed7263e-513b-11e1-b94f-8212e8517925 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 180.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 180.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:58a7f74c-cd9b-45e1-84fd-b85b31b454be, uuid:f214f501-aa18-4818-9f6e-50919bbe5281, xmp.iid:4C675901E7C4E111A54DC4833359FBED, uuid:f214f501-aa18-4818-9f6e-50919bbe5281, uuid:333bde19-e22a-4c76-87a2-3de9c4669814, xmp.iid:85FA72663304E111B6ABFA104E26934A, xmp.iid:84FA72663304E111B6ABFA104E26934A, xmp.iid:FB19F90C83D7E011A0DDEC518A459A47, xmp.iid:C6438DADA5DEE0119AB68EC13D68B676, xmp.iid:08712E02097BE2118760DDABEACED8D1, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9c500819-ab42-4b62-8154-fef9dd2609bb, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:39fece6f-5712-496f-81c2-c6f3059844d4, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:4d5a0605-952b-4f25-8db3-4034c4f4263d, uuid:054c6259-a53d-418a-9cc4-f99810a4b277, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:054c6259-a53d-418a-9cc4-f99810a4b277, uuid:f65c430f-8a72-44ef-8c61-79b00755e2a0, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:28e41c5f-d82a-45db-829b-221402743b92, uuid:B69554869FC7DF119164A520FBF4BDAC, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:333bde19-e22a-4c76-87a2-3de9c4669814, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:8f5c5849-56b5-499f-8eb3-c4e869fb8c26, uuid:e3716b51-17d7-46c6-9370-6f90ccf67770, uuid:3d682d3a-b448-4f3c-8581-b450a81c7c5c, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:333bde19-e22a-4c76-87a2-3de9c4669814 Manifest Reference Document ID : uuid:5B275E43E5CCDD119F0ED9C29D6E5017, uuid:2535AB770FBEDE11B089B3619C8772C0, xmp.did:4C675901E7C4E111A54DC4833359FBED, uuid:2535AB770FBEDE11B089B3619C8772C0, uuid:4ADF5D1795D0DD11868AEC5BFA43170E, xmp.did:85FA72663304E111B6ABFA104E26934A, xmp.did:84FA72663304E111B6ABFA104E26934A, xmp.did:FA19F90C83D7E011A0DDEC518A459A47, xmp.did:C5438DADA5DEE0119AB68EC13D68B676, DBDBE6BAAA0AEC3CA5A9732437B98043, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:fe5cb946-4151-48bc-8daa-8e55cb458b89, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:11353023B2BFDF119892E6AA95A9D70F, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ebfe258c-5c68-45e6-9d9b-7f172587f1d2, uuid:384E2116D35EDE11ADE3AEC2EE756150, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:384E2116D35EDE11ADE3AEC2EE756150, uuid:344E2116D35EDE11ADE3AEC2EE756150, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:33F4139853ACE0119A2D8448DC8610E6, uuid:B59554869FC7DF119164A520FBF4BDAC, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:4ADF5D1795D0DD11868AEC5BFA43170E, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:96395012-3320-4d29-b2a8-6efc4af3a171, uuid:bfda2104-0718-4063-8aae-2cd1c2ac75c5, uuid:1ad8cbde-8d0c-4c77-81c3-6cb414b64d95, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:4ADF5D1795D0DD11868AEC5BFA43170E Create Date : 2013:02:27 13:30:43+08:00 Modify Date : 2013:02:27 13:31:10+08:00 Metadata Date : 2013:02:27 13:31:10+08:00 Creator Tool : Adobe InDesign CS2 (4.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8136 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 96 Creator : Adobe InDesign CS2 (4.0)EXIF Metadata provided by EXIF.tools