Msi Z87 G43 Owner S Manual

Msi-H87-G43-Owner-S-Manual msi-h87-g43-owner-s-manual

2014-07-06

: Msi Msi-Z87-G43-Owner-S-Manual msi-z87-g43-owner-s-manual msi pdf

Open the PDF directly: View PDF .
Page Count: 112

Download
Open PDF In Browser	View PDF

Preface

Z87-G43
H87-G43
B85-G43

Motherboard

G52-78161X1

Preface

The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL. We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents. Our products are under
continual improvement and we reserve the right to make changes without notice.

Trademarks
All trademarks in this manual are properties of their respective owners.
￭ MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.
￭ NVIDIA® is registered trademark of NVIDIA Corporation.
￭ ATI® is registered trademark of AMD Corporation.
￭ AMD® is registered trademarks of AMD Corporation.
￭ Intel® is registered trademarks of Intel Corporation.
￭ Windows® is registered trademarks of Microsoft Corporation.
￭ AMI® is registered trademark of American Megatrends Inc.
￭ Award® is a registered trademark of Phoenix Technologies Ltd.
￭ Sound Blaster® is registered trademark of Creative Technology Ltd.
￭ Realtek® is registered trademark of Realtek Semiconductor Corporation.
￭ JMicron® is registered trademark of JMicron Technology Corporation.
￭ Netware® is registered trademark of Novell, Inc.
￭ Lucid® is trademark of LucidLogix Technologies, Ltd.
￭ VIA® is registered trademark of VIA Technologies, Inc.
￭ ASMedia® is registered trademark of ASMedia Technology Inc.
￭ iPad, iPhone, and iPod are trademarks of Apple Inc.
￭ Qualcomm Atheros and Killer are trademarks of Qualcomm Atheros Inc.

Revision History
Revision

Revision History

Date

V1.0

First release

2013/ 03

Preface

MSI+ is a smart web gadget that works as a shopping navigator and
provides specs comparison for IT buyers. With a simple tap of the
smartphone, you'll efficiently locate your ideal products from a wide
variety of choices and, if product details are required, you may easily
download user manuals within minutes. Better yet, the power calculator
provides accurate estimates of power unit capacity for DIY users.

Technical Support
If a problem arises with your system and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor. Alternatively,
please try the following help resources for further guidance.

Visit the MSI website for technical guide, BIOS
updates, driver updates, and other information:

http://www.msi.com/service/download/

Contact our technical staff at:

http://support.msi.com

iii

Preface

Smartphone Application

Safety Instructions
￭ Always read the safety instructions carefully.
￭ Keep this User’s Manual for future reference.

Preface

￭ Keep this equipment away from humidity.
￭ Lay this equipment on a reliable flat surface before setting it up.
￭ The openings on the enclosure are for air convection hence protects the equipment
from overheating. DO NOT COVER THE OPENINGS.
￭ Make sure the voltage of the power source is at 110/220V before connecting the
equipment to the power inlet.
￭ Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
￭ Always Unplug the Power Cord before inserting any add-on card or module.
￭ All cautions and warnings on the equipment should be noted.
￭ Never pour any liquid into the opening that can cause damage or cause electrical
shock.
￭ If any of the following situations arises, get the equipment checked by service
personnel:
◯

The power cord or plug is damaged.

◯

Liquid has penetrated into the equipment.

◯

The equipment has been exposed to moisture.

◯

The equipment does not work well or you can not get it work according to
User’s Manual.

◯

The equipment has been dropped and damaged.

◯

The equipment has obvious sign of breakage.

￭ DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60oC (140oF),
IT MAY DAMAGE THE EQUIPMENT.

Preface

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
measures listed below.
◯

Reorient or relocate the receiving antenna.

◯

Increase the separation between the equipment and receiver.

◯

Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

◯

Consult the dealer or an experienced radio/television technician for help.

Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply
with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

Micro-Star International
MS-7816

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may
cause undesired operation.

CE Conformity
Hereby, Micro-Star International CO., LTD declares that this device is
in compliance with the essential safety requirements and other relevant
provisions set out in the European Directive.

Preface

FCC-B Radio Frequency Interference Statement

Radiation Exposure Statement

Preface

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment and its antenna should be installed and
operated with minimum distance 20 cm between the radiator and your body. This
equipment and its antenna must not be co-located or operating in conjunction with any
other antenna or transmitter.

European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public
to electromagnetic fields (0–300GHz). This wireless device complies with the R&TTE
Directive.

Taiwan Wireless Statements
無線設備警告聲明
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻
率、加大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立
即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線
電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之
干擾。
警告使用者:這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在
這種情況下，使用者會被要求採取某些適當的對策。

Japan VCCI Class B Statement
クラス B 情報技術装置
この装置は、情報技術装置等電波障害自主規制協議会（VCCI）の基準に基づくクラ
スB情報技術装置です。この装置が家庭内でラジオやテレビジョン受信機に近接して
使われると、受信障害を引き起こすことがあります。取扱説明書にしたがって正しい
取り扱いをしてください。

Korea Warning Statements
당해 무선설비는 운용중 전파혼신 가능성이 있음

Preface

Battery Information
Batteries, battery packs, and accumulators should not be disposed of
as unsorted household waste. Please use the public collection system
to return, recycle, or treat them in compliance with the local regulations.

Taiwan:
For better environmental protection, waste batteries should be collected
separately for recycling or special disposal.
廢電池請回收
California, USA:
The button cell battery may contain perchlorate material and requires
special handling when recycled or disposed of in California.
For further information please visit:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
CAUTION: There is a risk of explosion, if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.

Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
http://www.msi.com/html/popup/csr/evmtprtt_pcm.html

vii

Preface

European Union:

WEEE (Waste Electrical and Electronic Equipment) Statement
ENGLISH

Preface

To protect the global environment and as an environmentalist, MSI must
remind you that...
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/EC, which takes effect on August
13, 2005, products of “electrical and electronic equipment” cannot be
discarded as municipal wastes anymore, and manufacturers of covered
electronic equipment will be obligated to take back such products at the end of their
useful life. MSI will comply with the product take back requirements at the end of life
of MSI-branded products that are sold into the EU. You can return these products to
local collection points.

DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen
Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden.
MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt,
die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines
Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen
Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS
En tant qu’écologiste et afin de protéger l’environnement, MSI tient à rappeler ceci...
Au sujet de la directive européenne (EU) relative aux déchets des équipement
électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005,
que les produits électriques et électroniques ne peuvent être déposés dans les
décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements
seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte
cette exigence relative au retour des produits en fin de vie au sein de la communauté
européenne. Par conséquent vous pouvez retourner localement ces matériels dans
les points de collecte.

РУССКИЙ
Компания MSI предпринимает активные действия по защите окружающей среды,
поэтому напоминаем вам, что....
В соответствии с директивой Европейского Союза (ЕС) по предотвращению
загрязнения окружающей среды использованным электрическим и электронным
оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13
августа 2005 года, изделия, относящиеся к электрическому и электронному
оборудованию, не могут рассматриваться как бытовой мусор, поэтому
производители вышеперечисленного электронного оборудования обязаны
принимать его для переработки по окончании срока службы. MSI обязуется
соблюдать требования по приему продукции, проданной под маркой MSI на
территории EC, в переработку по окончании срока службы. Вы можете вернуть
эти изделия в специализированные пункты приема.

Preface

viii

ESPAÑOL
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o
equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos
clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en
los contenedores habituales de su municipio, los fabricantes de equipos electrónicos,
están obligados a hacerse cargo de dichos productos al termino de su período de
vida. MSI estará comprometido con los términos de recogida de sus productos
vendidos en la Unión Europea al final de su periodo de vida. Usted debe depositar
estos productos en el punto limpio establecido por el ayuntamiento de su localidad o
entregar a una empresa autorizada para la recogida de estos residuos.

NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische
en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan
kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort
producten worden verplicht om producten retour te nemen aan het eind van hun
levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten
die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen
geretourneerd worden op lokale inzamelingspunten.

SRPSKI
Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj
sredini, MSI mora da vas podesti da…
Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi,
Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji
spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan
otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju
njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih
proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU.
Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.

POLSKI
Aby chronić nasze środowisko naturalne oraz jako firma dbająca o ekologię, MSI
przypomina, że...
Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów
elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13
sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie
mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów
będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z
użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie
Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w
wyznaczonych punktach zbiorczych.

Preface

MSI como empresa comprometida con la protección del medio ambiente, recomienda:

TÜRKÇE
Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:

Preface

Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC
Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere,
elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik
cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla
yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri
bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi
yerel toplama noktalarına bırakabilirsiniz.

ČESKY
Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků
2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické
výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které
se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení
jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky
MSI, prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete
odevzdat v místních sběrnách.

MAGYAR
Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve
az MSI emlékezteti Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos
és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint
az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági
hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az
ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a
termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n
belül értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket
a legközelebbi gyűjtőhelyre viheti.

ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici
ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti
alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati
come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni
prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i
prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fine
del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta

Preface

▍ Contents
Copyright Notice�������������������������������������������������������������������������������������������������������ii
Trademarks��������������������������������������������������������������������������������������������������������������ii
Revision History�������������������������������������������������������������������������������������������������������ii
Smartphone Application������������������������������������������������������������������������������������������iii
Technical Support���������������������������������������������������������������������������������������������������iii
Safety Instructions���������������������������������������������������������������������������������������������������iv
FCC-B Radio Frequency Interference Statement��������������������������������������������������� v
CE Conformity��������������������������������������������������������������������������������������������������������� v
Radiation Exposure Statement�������������������������������������������������������������������������������vi
European Community Compliance Statement��������������������������������������������������������vi
Taiwan Wireless Statements�����������������������������������������������������������������������������������vi
Japan VCCI Class B Statement������������������������������������������������������������������������������vi
Korea Warning Statements�������������������������������������������������������������������������������������vi
Battery Information�������������������������������������������������������������������������������������������������vii
Chemical Substances Information�������������������������������������������������������������������������vii
WEEE (Waste Electrical and Electronic Equipment) Statement��������������������������� viii

Chapter 1 Getting Started���������������������������������������������������������������������������1-1
Packing Contents������������������������������������������������������������������������������������������������� 1-2
Optional Accessories������������������������������������������������������������������������������������������� 1-2
Assembly Precautions������������������������������������������������������������������������������������������ 1-3
Motherboard Specifications���������������������������������������������������������������������������������� 1-4
Connectors Quick Guide�������������������������������������������������������������������������������������� 1-7
Back Panel Quick Guide�������������������������������������������������������������������������������������� 1-9
CPU (Central Processing Unit)�������������������������������������������������������������������������� 1-11
Introduction to the LGA 1150 CPU�������������������������������������������������������������� 1-11
CPU & Heatsink Installation������������������������������������������������������������������������� 1-12
Memory�������������������������������������������������������������������������������������������������������������� 1-15
Dual-Channel mode Population Rule���������������������������������������������������������� 1-15
Mounting Screw Holes��������������������������������������������������������������������������������������� 1-16
Power Supply����������������������������������������������������������������������������������������������������� 1-17
JPWR1~2: ATX Power Connectors������������������������������������������������������������� 1-17
Expansion Slots������������������������������������������������������������������������������������������������� 1-18
PCI_E1~E4: PCIe Expansion Slot��������������������������������������������������������������� 1-18
Video/ Graphics Cards �������������������������������������������������������������������������������������� 1-19
Single Video Card Installation���������������������������������������������������������������������� 1-19
AMD CrossFire™ (Multi-GPU) Technology������������������������������������������������� 1-20
Internal Connectors�������������������������������������������������������������������������������������������� 1-22
SATA1~6: SATA Connector ����������������������������������������������������������������������� 1-22
xi

Preface

Preface������������������������������������������������������������������������������������������������������������ i

CPUFAN1~2,SYSFAN1~3: Fan Power Connectors������������������������������������ 1-23
JFP1, JFP2: System Panel Connectors������������������������������������������������������ 1-24
JUSB1~2: USB 2.0 Expansion Connector��������������������������������������������������� 1-25

Preface

JTPM1: TPM Module Connector����������������������������������������������������������������� 1-26
JAUD1: Front Panel Audio Connector��������������������������������������������������������� 1-27
JCOM1: Serial Port Connector�������������������������������������������������������������������� 1-28
Jumper��������������������������������������������������������������������������������������������������������������� 1-29
JBAT1: Clear CMOS Jumper����������������������������������������������������������������������� 1-29
Drivers and Utilities�������������������������������������������������������������������������������������������� 1-30
Total Installer����������������������������������������������������������������������������������������������� 1-30

Chapter 2 Quick Installation������������������������������������������������������������������������2-1
CPU Installation��������������������������������������������������������������������������������������������������� 2-2
Memory Installation���������������������������������������������������������������������������������������������� 2-4
Motherboard Installation��������������������������������������������������������������������������������������� 2-5
Power Connectors Installation����������������������������������������������������������������������������� 2-7
SATA HDD Installation����������������������������������������������������������������������������������������� 2-9
mSATA SSD Installation������������������������������������������������������������������������������������ 2-10
Front Panel Connector Installation��������������������������������������������������������������������� 2-11
JFP1 Connecotr Installation������������������������������������������������������������������������� 2-11
Front Panel Audio Connector Installation���������������������������������������������������� 2-11
Peripheral Connector Installation����������������������������������������������������������������������� 2-12
USB2.0 Connector Installation��������������������������������������������������������������������� 2-12
USB3.0 Connector Installation��������������������������������������������������������������������� 2-12
Graphics Card Installation���������������������������������������������������������������������������������� 2-13

Chapter 3 BIOS Setup���������������������������������������������������������������������������������3-1
Entering Setup����������������������������������������������������������������������������������������������������� 3-2
Entering BIOS Setup������������������������������������������������������������������������������������� 3-2
Overview�������������������������������������������������������������������������������������������������������������� 3-3
Operation������������������������������������������������������������������������������������������������������������� 3-5
SETTINGS����������������������������������������������������������������������������������������������������������� 3-6
System Status������������������������������������������������������������������������������������������������ 3-6
Advanced������������������������������������������������������������������������������������������������������� 3-7
Boot������������������������������������������������������������������������������������������������������������� 3-15
Security�������������������������������������������������������������������������������������������������������� 3-15
Save & Exit�������������������������������������������������������������������������������������������������� 3-16
OC���������������������������������������������������������������������������������������������������������������������� 3-17
M-FLASH����������������������������������������������������������������������������������������������������������� 3-27
OC PROFILE����������������������������������������������������������������������������������������������������� 3-28
HARDWARE MONITOR������������������������������������������������������������������������������������ 3-29

Appendix A Realtek Audio�������������������������������������������������������������������������� A-1
Preface

xii

Software Configuration�����������������������������������������������������������������������������������������A-2
Software panel overview��������������������������������������������������������������������������������A-2
Hardware Default Setting�������������������������������������������������������������������������������������A-4

Appendix B Intel RAID�������������������������������������������������������������������������������� B-1
Introduction����������������������������������������������������������������������������������������������������������B-2
Using Intel Rapid Storage Technology Option ROM�������������������������������������������B-3
Degraded RAID Array����������������������������������������������������������������������������������������B-10
System Acceleration (optional)��������������������������������������������������������������������������B-12
RST Synchronization (optional)�������������������������������������������������������������������������B-14

Appendix C Intel SBA��������������������������������������������������������������������������������� C-1
Prerequisites������������������������������������������������������������������������������������������������������� C-2
Installing Intel SBA���������������������������������������������������������������������������������������������� C-3
Software Configuration���������������������������������������������������������������������������������������� C-3
Software panel overview������������������������������������������������������������������������������� C-3
Password settings����������������������������������������������������������������������������������������� C-4
Help Button��������������������������������������������������������������������������������������������������������� C-4

xiii

Preface

Auto popup dialog������������������������������������������������������������������������������������������A-3

Chapter 1

Getting Started
Thank you for choosing the Z87-G43/ H87-G43/ B85-G43 Series (MS7816 v1.X) ATX motherboard. The Z87-G43/ H87-G43/ B85-G43 Series
motherboards are based on Intel® Z87/ H87/ B85 chipset for optimal system
efficiency. Designed to fit the advanced Intel® LGA1150 processor, the Z87G43/ H87-G43/ B85-G43 Series motherboards deliver a high performance
and professional desktop platform solution.

Packing Contents

Motherboard

Drivers & Utilities
Disc

Motherboard
User Guide

I/O Shield

Chapter 1

SATA Cable

Optional Accessories

USB 3.0 Bracket

M-Connector

* These pictures are for reference only and may vary without notice.
* The packing contents may vary according to the model you purchased.
* If you need to purchase the optional accessories or request part numbers, please
visit the MSI website at http://www.msi.com/index.php or consult the dealer.

Getting Started

1-2

■ The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
■ Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
■ Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
■ Hold the motherboard by the edges to avoid touching sensitive components.
■ It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is
not available, discharge yourself of static electricity by touching another metal object
before handling the motherboard.
■ Store the motherboard in an electrostatic shielding container or on an antistatic pad
whenever the motherboard is not installed.
■ Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
■ Do not use the computer in a high-temperature environment.
■ Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
■ If you need help during any installation step, please consult a certified computer
technician.

Important
A screwdriver (not included) may be required for computer assembly.

1-3

Getting Started

Chapter 1

Assembly Precautions

Motherboard Specifications
CPU
Support

■ 4th Generation Intel® Core™ i7 / Core™ i5 / Core™ i3 / Pentium® /
Celeron® processors for LGA 1150 socket

Chipset

■ Intel® Z87 Express Chipset (Z87-G43)
■ Intel® H87 Express Chipset (H87-G43)*
■ Intel® B85 Express Chipset (B85-G43)*
* Supports Intel® SBA.

Chapter 1

Memory
Support

■ 4x DDR3 memory slots supporting up to 32GB
■ Supports DDR3 3000(OC)/ 2800(OC)/ 2666(OC)/ 2600(OC)/
2400(OC)/ 2200(OC)/ 2133(OC)/ 2000(OC)/ 1866(OC)/ 1600/ 1333/
1066 MHz
- OC is for Z87-G43 only.
■ Dual channel memory architecture
■ Supports non-ECC, un-buffered memory
■ Supports Intel® Extreme Memory Profile (XMP)

Expansion
Slots

■ 1x PCIe 3.0 x16 slot
■ 1x PCIe 2.0 x16 slot
- Supports up to PCIe 2.0 x4 speed.
■ 2x PCIe 2.0 x1 slots
■ 3x PCI slots

Onboard
Graphics

■ 1x VGA port, supporting a maximum resolution of 1920x1200 @
60Hz
■ 1x HDMI® port, supporting a maximum resolution of
4096x2160@24Hz, 24bpp/ 2560x1600@60Hz, 24bpp/
1920x1080@60Hz, 36bpp
■ 1x DVI-D port, supporting a maximum resolution of 1920x1200 @
60Hz

Multi-GPU
Support

■ Supports 2-Way AMD CrossFireTM Technology*

Storage

■ Intel Z87/ H87/ B85 Express Chipset
- 6x SATA 6Gb/s ports (SATA1~6) (Z87-G43/ H87-G43)
- 4x SATA 6Gb/s ports (SATA1~4) (B85-G43)
- 2x SATA 3Gb/s ports (SATA5~6) (B85-G43)
- Supports RAID 0, RAID1, RAID 5 and RAID 10 (For Z87-G43/
H87-G43)
- Supports Intel Smart Response Technology, Intel® Rapid Start
Technology and Intel® Smart Connect Technology*

* Supports Windows 7 and Windows 8.

* Supports Intel Core processors on Windows 7 and Windows 8.

USB

■ Intel Z87/ H87/ B85 Express Chipset
- 4x USB 3.0 ports (2 ports on the back panel, 2 ports available
through the internal USB connectors)
- 10x USB 2.0 ports (6 ports on the back panel, 4 ports available
through the internal USB connectors)

Audio

■ Realtek® ALC892 Codec
- 7.1-Channel High Definition Audio

LAN

■ 1x Realtek® 8111E Gigabit LAN controller

Getting Started

1-4

■ 1x PS/2 keyboard/ mouse combo port
■ 6x USB 2.0 ports
■ 1x HDMI port
■ 1x VGA port
■ 1x DVI-D port
■ 1x LAN (RJ45) port
■ 2x USB 3.0 ports
■ 6x audio jacks

Internal
Connectors

■ 1x 24-pin ATX main power connector
■ 1x 8-pin ATX 12V power connector
■ 6x SATA 6Gb/s connectors
- For Z87-G43/ H87-G43.
■ 4x SATA 6Gb/s connectors and 2x SATA 3Gb/s connectors
- For B85-G43.
■ 2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)
■ 1x USB 3.0 connectors (supports additional 2 USB 3.0 ports)
■ 2x 4-pin CPU fan connectors
■ 3x 4-pin system fan connectors
■ 1x Clear CMOS jumper
■ 1x Front panel audio connector
■ 2x System panel connectors
■ 1x TPM module connector
■ 1x Serial port connector
■ 1x Parallel port connector
■ 1x Chassis Intrusion connector

I/O
Controller

■ NUVOTON NCT6779 Controller Chip

Hardware
Monitor

■ CPU/System temperature detection
■ CPU/System fan speed detection
■ CPU/System fan speed control

BIOS
Features

■ 64 Mb flash (Z87-G43)
■ 128 Mb flash (H87-G43/ B85-G43)
■ UEFI AMI BIOS
■ ACPI 5.0, PnP 1.0a, SM BIOS 2.7, DMI 2.0
■ Multi-language

Special
Features

■ DigitALL Power
■ Military Class 4
■ OC Genie 4
■ CLICK BIOS 4
■ All Solid CAPs
■ AMD CrossFire
■ PCI Express Gen 3
■ Sound Blaster Cinema (optional)
■ Super RAID
■ USB 3.0
■ SATA 6Gb/s
■ HDMI
■ Command Center
■ Live Update
■ M-Flash

1-5

Getting Started

Chapter 1

Back Panel
Connectors

Chapter 1

Software

■ Drivers
■ MSI
- Command Center
- Super Charger
- Super RAID
- Live Update 5
- Fast Boot
■ 7-ZIP
■ Intel Turbo Boost Monitor
■ Intel Extreme Tuning Utility
■ Intel Small Business Advantage (Optional)
■ Sound Blaster Cinema (Optional)
■ Norton Internet Security Solution
■ Trend Micro SafeSync

Form
Factor

■ ATX Form Factor
■ 12.0 in. x 9.6 in. (30.5 cm x 24.4 cm)
For the latest information about CPU, please visit
http://www.msi.com/service/cpu-support/

For more information on compatible components, please visit
http://www.msi.com/service/test-report/

Getting Started

1-6

Connectors Quick Guide

SYSFAN1

DIMM1
DIMM2
DIMM3
DIMM4
CPUFAN1

CPU Socket

JPWR2

Chapter 1

CPUFAN2

Back
Panel
JPWR1

JUSB3
PCI_E1
JBAT1

PCI_E2

SATA2

PCI_E3

SYSFAN3

PCI1

SATA1

PCI_E4

SATA3_4

PCI2

SATA5_6

PCI3

JCI1
JFP2
JAUD1

JUSB2

JTPM1

JFP1

JUSB1
JLPT1

SYSFAN2
JCOM1

1-7

Getting Started

Connectors Reference Guide

Chapter 1

Port Name

Port Type

Page

Back Panel

I/O Ports

1-9

CPU Socket

LGA1150 CPU Socket

1-12

CPUFAN1~2,SYSFAN1~3

Fan Power Connectors

1-23

DIMM1~4

DDR3 Memory Slots

1-15

JAUD1

Front Panel Audio Connector

1-27

JBAT1

Clear CMOS Jumper

1-29

JCI1

Chassis Intrusion Connector

1-26

JCOM1

Serial Port Connector

1-28

JFP1, JFP2

System Panel Connectors

1-24

JLPT1

Parallel Port Connector

1-27

JPWR1~2

ATX Power Connectors

1-17

JTPM1

TPM Module Connector

1-26

JUSB1~2

USB 2.0 Expansion Connectors

1-25

JUSB3

USB 3.0 Expansion Connector

1-25

PCI_E1, 3

PCIe x1 Expansion Slots

1-18

PCI_E2, 4

PCIe x16 Expansion Slots

1-18

PCI1~3

PCI Expansion Slots

1-18

SATA1~6

SATA Connectors

1-22

Getting Started

1-8

Back Panel Quick Guide
PS/2 Keyboard/
Mouse Combo
Port
USB 2.0 Port

LAN Port

VGA

USB 3.0 Port

Line-In RS-Out
Line-Out CS-Out

HDMI

USB 2.0 Port

Mic

DVI-D Port

SS-Out

▶ PS/2 Keyboard/Mouse Combo Port
A combination of PS/2® mouse/keyboard DIN connector for a PS/2® mouse/keyboard.
▶ VGA Port
The DB15-pin female connector is provided for monitor.
▶ DVI-D Port
The DVI-D (Digital Visual Interface- Digital) connector can be connected to a LCD
monitor, or a CRT monitor with an adapter. To connect a monitor, please refer to the
monitor’s manual for more information.
▶ HDMI Port
The High-Definition Multimedia Interface (HDMI) is an all-digital audio-video interface
that is capable of transmitting uncompressed streams. HDMI supports all types of TV
formats, including standard, enhanced, or high-definition video, plus multi-channel
digital audio on a single cable.

Important
This platform supports dual-display or triple-display function by integrated graphics
output ports.
VGA+DVI-D

DVI-D+HDMI

HDMI+VGA

HDMI+VGA+DVI-D

Extend mode
(Extend the desktop to
the other monitors)

◯

Clone mode
(Monitors have the same
screen)

◯

▶ USB 2.0 Port
The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mouse, or other
USB 2.0-compatible devices.

1-9

Getting Started

Chapter 1

USB 2.0 Port

▶ USB 3.0 Port
USB 3.0 port is backward-compatible with USB 2.0 devices. It supports data transfer
rate up to 5 Gbit/s (SuperSpeed).

Important
In order to use USB 3.0 devices, you must connect to a USB 3.0 port. If a USB cable
is used, it must be USB 3.0 compliant.
▶ LAN Port
The standard RJ-45 LAN jack is for connecting to a Local Area Network (LAN).
LED

Chapter 1

LINK/ACT
LED

SPEED
LED

Link/ Activity LED

Speed LED

LED Status

Description

Off

No link

Yellow

Linked

Blinking

Data activity

Off

10 Mbps connection

Green

100 Mbps connection

Orange

1 Gbps connection

▶ Audio Ports
These connectors are used for audio devices. The color of the jack refers to the
function of the connector.
■ Blue-Line in: Used for connecting external audio outputting devices.
■ Green- Line out: Used as a connector for speakers or headphone.
■ Pink- Mic: Used as a connector for a microphone.
■ Black- RS-Out: Rear surround sound line out in 4/ 5.1/ 7.1 channel mode.
■ Orange- CS-Out: Center/ subwoofer line out in 5.1/ 7.1 channel mode.
■ Gray- SS-Out: Side surround sound line out in 7.1 channel mode.

Getting Started

1-10

CPU (Central Processing Unit)
Introduction to the LGA 1150 CPU
The surface of the LGA 1150 CPU has two notches and a golden triangle to
assist in correctly lining up the CPU for motherboard placement. The golden
triangle is the Pin 1 indicator.

Notch

Chapter 1

Notch

Golden triangle is the Pin 1 indicator

Important
Overheating
Overheating can seriously damage the CPU and motherboard. Always make sure the
cooling fans work properly to protect the CPU from overheating. Be sure to apply an
even layer of thermal paste (or thermal tape) between the CPU and the heatsink to
enhance heat dissipation.
Replacing the CPU
When replacing the CPU, always turn off the system’s power supply and unplug the
power supply’s power cord to ensure the safety of the CPU.
Overclocking
This motherboard is designed to support overclocking. Before attempting to overclock,
please make sure that all other system components can tolerate overclocking. Any
attempt to operate beyond product specifications is not recommend. MSI does not
guarantee the damages or risks caused by inadequate operation beyond product
specifications.

1-11

Getting Started

CPU & Heatsink Installation
When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink
is necessary to prevent overheating and maintain system stability. Follow the steps
below to ensure correct CPU and heatsink installation. Wrong installation can damage
both the CPU and the motherboard.

Video Demonstration
Watch the video to learn how to install CPU & heatsink. at the address
below.
http://youtu.be/bf5La099urI

Chapter 1

1. Push the load lever down to unclip it and lift to the fully open position.
2. The load plate will automatically lift up as the load lever is pushed to the fully open
position.

Load lever

Load plate

Retention tab

Important
Do not touch the socket contacts or the bottom of the CPU.

Getting Started

1-12

3. Align the notches with the socket alignment keys. Lower the CPU straight down,
without tilting or sliding the CPU in the socket. Inspect the CPU to check if it is
properly seated in the socket.
4. Close and slide the load plate under the retention knob. Close and engage the
load lever.

Chapter 1

CPU notches

Alignment Key

Retention knob

5. When you press down the load lever the PnP cap will automatically pop up from
the CPU socket. Do not discard the PnP cap. Always replace the PnP cap if the
CPU is removed from the socket.
6. Evenly spread a thin layer of thermal paste (or thermal tape) on the top of the
CPU. This will help in heat dissipation and prevent CPU overheating.
PnP cap
Thermal paste

1-13

Getting Started

7. Locate the CPU fan connector on the motherboard.
8. Place the heatsink on the motherboard with the fan’s cable facing towards the fan
connector and the fasteners matching the holes on the motherboard.
CPU fan connector

Chapter 1
9. Push down the heatsink until the four fasteners get wedged into the holes on
the motherboard. Press the four fasteners down to fasten the heatsink. As each
fastener locks into position a click should be heard.
10. Inspect the motherboard to ensure that the fastener-ends have been properly
locked in place.
11. Finally, attach the CPU fan cable to the CPU fan connector on the motherboard.

Motherboard

Fastener-end

Important
• Confirm that the CPU heatsink has formed a tight seal with the CPU before booting
your system.
• Whenever the CPU is not installed, always protect the CPU socket pins by covering
the socket with the plastic cap.
• If you purchased a separate CPU and heatsink/ cooler, Please refer to the
documentation in the heatsink/ cooler package for more details about installation.
Getting Started

1-14

Memory
These DIMM slots are used for installing memory modules. For more information on
compatible components, please visit http://www.msi.com/service/test-report/

Chapter 1

DIMM1
DIMM2
DIMM3
DIMM4

Video Demonstration
Watch the video to learn how to install memories at the address below.
http://youtu.be/76yLtJaKlCQ

Dual-Channel mode Population Rule
In Dual-Channel mode, the memory modules can transmit and receive data with two
data bus channels simultaneously. Enabling Dual-Channel mode can enhance system
performance. The following illustrations explain the population rules for Dual-Channel
mode.

DIMM2
DIMM4

DIMM1
DIMM2
DIMM3
DIMM4

Important
• DDR3 memory modules are not interchangeable with DDR2, and the DDR3
standard is not backward compatible. Always install DDR3 memory modules in
DDR3 DIMM slots.
• To ensure system stability, memory modules must be of the same type and density
in Dual-Channel mode.
• Due to chipset resource usage, the system will only detect up to 31+ GB of memory
(not full 32 GB) when all DIMM slots have 8GB memory modules installed.

1-15

Getting Started

Mounting Screw Holes

Chapter 1

The I/O ports should be facing
toward the rear of the computer
case. They should line up with the
holes on the I/O backplate.

When installing the motherboard, first install the necessary mounting stands required
for an motherboard on the mounting plate in your computer case. If there is an
I/O back plate that came with the computer case, please replace it with the I/O
backplate that came with the motherboard package. The I/O backplate should snap
easily into the computer case without the need for any screws. Align the mounting
plate’s mounting stands with the screw holes on the motherboard and secure the
motherboard with the screws provided with your computer case. The locations of the
screw holes on the motherboard are shown below. For more information, please refer
to the manual that came with the computer case.

Important
• Install the motherboard on a flat surface free from unnecessary debris.
• To prevent damage to the motherboard, any contact between the motherboard
circuitry and the computer case, except for the mounting stands, is prohibited.
• Please make sure there are no loose metal components on the motherboard or
within the computer case that may cause a short circuit of the motherboard.

Getting Started

1-16

Power Supply
Video Demonstration
Watch the video to learn how to install power supply connectors.
http://youtu.be/gkDYyR_83I4

JPWR1~2: ATX Power Connectors

d
n
u d
ro un nd
.G ro u d
4 .G ro un
3 .G ro
2 .G
1

Chapter 1

These connectors allow you to connect an ATX power supply. To connect the ATX
power supply, align the power supply cable with the connector and firmly press the
cable into the connector. If done correctly, the clip on the power cable should be
hooked on the motherboard’s power connector.

JPWR2
V
2
1 V
.+ 2 V
8 .+1 2 V
7 .+1 12
6 .+
5

d
n
u
ro
V
.G 5 V
4
2 3.+ +5 V
d
2 2. +5 s un d
2 . e o n d
1
2 .R Gr ou n #
0
2 9. Gr rou ON d
- n
1 8.
1 7.G PS ou
1 6. Gr 2V V
1 5. 1 .3
1 4.- +3
1 3.
1

V
.3
3 V
.+ 2 V
2 1 2
1 1.+ +1 B OK
1 0. VS R nd
1 5 W u
.
d
9 P ro
.
8 .G 5V un
d
7 .+ ro
6 .G 5V un
5 .+ ro 3V
4 .G . V
3 .+3 3.3
2 .+
1

JPWR1

Important
Make sure that all the power cables are securely connected to a proper ATX power
supply to ensure stable operation of the motherboard.

1-17

Getting Started

Expansion Slots
This motherboard contains numerous slots for expansion cards, such as discrete
graphics or audio cards.

PCI_E1~E4: PCIe Expansion Slot
The PCIe slot supports the PCIe interface expansion card.

PCIe 3.0 x16 Slot

Chapter 1

PCIe 2.0 x16 Slot

PCIe 2.0 x1 Slot

PCI1~3: PCI Expansion Slot
The PCI slot supports additional LAN, SCSI, USB, and other add-on cards that comply
with PCI specifications.

Important
When adding or removing expansion cards, always turn off the power supply and
unplug the power supply power cable from the power outlet. Read the expansion
card’s documentation to check for any necessary additional hardware or software
changes.

Getting Started

1-18

Video/ Graphics Cards
If available, this motherboard takes advantage of the CPU’s integrate graphics
processor, but discrete video cards can be installed by way of the motherboard’s
expansion slots. Adding on one or more discrete video cards will significantly boost
the system’s graphics performance. For best compatibility, MSI graphics cards are
recommended.

Watch the video to learn how to install a graphics card on PCIe x16 slot
with butterfly lock.
http://youtu.be/mG0GZpr9w_A

Single Video Card Installation
1. Determine what type of expansion slot(s) the video card will use. Locate the
expansion slot(s) on the motherboard. Remove any protective expansion slot
covers from the computer case.
2. Line up the video card on top of the expansion slot(s) with the display ports facing
out of the computer case. For a single video card installation, using the PCI_E2
slot is recommended.
3. Push the video card into its expansion slot(s). Depending on the expansion slot(s)
used, there should be clip(s) on the expansion slot(s) that will lock in place.
4. If needed, screw the edge of the graphics card to the computer case. Some video
cards might require a power cable directly from the power supply.
5. Please consult your video card’s manual for further instructions regarding driver
installation or other special settings.

1-19

Getting Started

Chapter 1

Video Demonstration

AMD CrossFire™ (Multi-GPU) Technology
AMD CrossFire™ is a multi-GPU performance gaming platform. By linking together
two or more discrete GPUs, CrossFire™ can significant improve system graphics
performance. It allows the ability to scale a system’s graphics power as needed,
making it the most scalable gaming platform. This motherboard will automatically
detect CrossFire™ technology and make changes in the BIOS as needed. Follow the
instructions below to ensure a successful two-way CrossFire™ installation.
1. Install two AMD Radeon™ HD graphics cards into the PCI_E2 & PCI_E5
expansion slots.

Chapter 1

2. With the two cards installed, a CrossFire™ Video Link cable(optional) is required
to connect the graphics cards. Attach one side of the cable on each of the cards
by way of the metal contacts (please refer to the picture below). Please note that
although two graphics cards have been installed, only the display ports on the
graphics card installed in the first PCIe x16 slot will work. All displays should be
connected to this graphics card.

CrossFire Video Link Cable
(optional)

Important
• Please ensure that all graphics cards used in CrossFire™ mode are of the same
brand and specifications. For best compatibility with the motherboard, MSI graphics
cards are recommended.
• Make sure to connect an adequate power supply to the power connectors on the
graphics cards to ensure stable operation.

Getting Started

1-20

3. Boot up the computer and install the drivers and software included in your video
card package. For more information, please refer to the manual that came with
your video card.

5. The CrossFire™ setting must be enabled to allow CrossFire™ mode to operate.
The follow screen appears in the Catalyst Control Center. Depending on your
operating system, the screen may look different.

Important
A CrossFireTM system has four possible display modes:
• SuperTiling
• Scissor Mode
• Alternate Frame Rendering
• Super Anti-aliasing.

For more details, please consult the graphics card manual.

1-21

Getting Started

Chapter 1

4. After all of the hardware and software has been properly installed, reboot the
system. After entering the operating system (OS), right click on the desktop and
choose the “Catalyst Control Center”.

Internal Connectors
SATA1~6: SATA Connector
This connector is a high-speed SATA interface port. Each connector can connect to
one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD),
and optical drives (CD/ DVD/ Blu-Ray).

Video Demonstration
Watch the video to learn how to Install SATA HDD.
http://youtu.be/RZsMpqxythc

Chapter 1

SATA2
SATA1

SATA6
SATA5

SATA4
SATA3

SATA1~6 (6Gb/s) by Intel® Z87/ H87
SATA1~4 (6Gb/s), SATA5~6 (3Gb/s) by Intel® B85

Important
• Many SATA devices also need a power cable from the power supply. Such devices
include disk drives (HDD), solid state drives (SSD), and optical drives (CD / DVD /
Blu-Ray). Please refer to the device’s manual for further information.
• Many computer cases also require that large SATA devices, such as HDDs, SSDs,
and optical drives, be screwed down into the case. Refer to the manual that came
with your computer case or your SATA device for further installation instructions.
• Please do not fold the SATA cable at a 90-degree angle. Data loss may result
during transmission otherwise.
• SATA cables have identical plugs on either sides of the cable. However, it is
recommended that the flat connector be connected to the motherboard for space
saving purposes.

Getting Started

1-22

CPUFAN1~2,SYSFAN1~3: Fan Power Connectors
The fan power connectors support system cooling fans with +12V. If the motherboard
has a System Hardware Monitor chipset on-board, you must use a specially designed
fan with a speed sensor to take advantage of the CPU fan control. Remember to
connect all system fans. Some system fans may not connect to the motherboard and
will instead connect to the power supply directly. A system fan can be plugged into
any available system fan connector.

CPUFAN1/
CPUFAN2

Chapter 1

o
d
tr
n
n
u
ro 2V e Co
.G 1 s d
1 .+ en e
2 .S pe
3 .S
4
d o
n C
u d
ro ee e
.G p s
1 S en
.
2 .S C
3 .N
4

SYSFAN1/
SYSFAN3/
SYSFAN2

n
tr
o
l

Important
• Please refer to your processor’s official website or consult your vendor to find
recommended CPU heatsink.
• These connectors support Smart Fan Control with liner mode. The Command
Center utility can be installed to automatically control the fan speeds according to
the CPU’s and system’s temperature.
• If there are not enough ports on the motherboard to connect all system fans,
adapters are available to connect a fan directly to a power supply.
• Before first boot up, ensure that there are no cables impeding any fan blades.

1-23

Getting Started

JFP1, JFP2: System Panel Connectors
These connectors connect to the front panel switches and LEDs. The JFP1 connector
is compliant with the Intel® Front Panel I/O Connectivity Design Guide. When
installing the front panel connectors, please use the optional M-Connector to simplify
installation. Plug all the wires from the computer case into the M-Connector and then
plug the M-Connector into the motherboard.

Video Demonstration
Watch the video to learn how to Install front panel connectors.
http://youtu.be/DPELIdVNZUI
ake

Buz

zer

.+
8
.6 .+
4 .

Chapter 1

Spe

D D
in E LE
P rL d
o e n
.N w e d
7 .Po sp n
5 u rou
S
.
3 .G
1

JFP2

P
o
w
e
r
0

in
P o 8.
.+
.N
6
.4 +
.
2

P
r

L
E
D

ch
it
w
d
S
e
t
rv e
D
s
E
se e
L
e R
D
.R
D
9
+
H
.
7 .5 .
3 .+
1

JFP1

Important
• On the connectors coming from the case, pins marked by small triangles are
positive wires. Please use the diagrams above and the writing on the optional MConnectors to determine correct connector orientation and placement.
• The majority of the computer case’s front panel connectors will primarily be plugged
into JFP1.

Getting Started

1-24

JUSB1~2: USB 2.0 Expansion Connector
This connector is designed for connecting high-speed USB peripherals such as USB
HDDs, digital cameras, MP3 players, printers, modems, and many others.

d
C un +
.N o 1
0 r B 1 .G S B1
8
.U S
6 .U C
4 VC
.
2

Chapter 1

in
P nd
o u +
.N r o 0
9 G B 0.
7 .U S B
S C
5
U
.
C
3 .V
1

Important
Note that the VCC and GND pins must be connected correctly to avoid possible
damage.

JUSB3: USB 3.0 Expansion Connector
The USB 3.0 port is backwards compatible with USB 2.0 devices. It supports data
transfer rates up to 5Gbits/s (SuperSpeed).
N
D
_ DP
in
N
P r X _
D
o e _R X
_ P
C D
.N w 3 R
_ _
0 o B _
2 .P S B3 nd X _C
T
9
1 8.U S ou _ X
1 7.U Gr B3 _T
1 6. S B3 nd 1 .U S u .0 +
o
5
1 4.U r B2 .0
1 3.G S B2
1 2.U S
1 1.U
1
N
D
_ DP
N
r X _
D
e R X
_ P
w _
o B3 _R _C _D
.P S 3 d X C
1 .U SB un T _
2 .U ro 3_ TX
3 .G SB 3_ d 4 .U B n 0
5 S u 2. 0 +
.U ro
6 .G SB 2. nd
7 U B u
. S
8 .U ro
9 0.G
1

Important
• Note that the VCC and GND pins must be connected correctly to avoid possible
damage.
• To use a USB 3.0 device, you must connect the device to a USB 3.0 port through
an optional USB 3.0 compliant cable.

1-25

Getting Started

JTPM1: TPM Module Connector
This connector connects to a optional TPM (Trusted Platform Module) Module. Please
refer to the TPM security platform manual for more details and usages.

3
in
p 2
ta in
a p 1
d ta pin 0
n
e s & da ta pi
m s & da ta
a
ra re s
F d s & d
C ad dre ss &
P
re s
.L C d d s
3 P a d re
1 1.L C a dd et
1 .LP C a es k
9 .LP C R loc
7 .LP C C
5 P C
L
.
3 .LP
1

d
n
u nd
r
ro u n r
e
.G ro Pi we Q r ow
4
1 2 . G o P o IR w e y p
1 .N V ial o b
0
1 .5 er P nd
8 S 3V ta
.
6 . S
.3
4 .3V
2

Chapter 1

JCI1: Chassis Intrusion Connector
This connector connects to the chassis intrusion switch cable. If the computer case is
opened, the chassis intrusion mechanism will be activated. The system will record this
intrusion and a warning message will flash on screen. To clear the warning, you must
enter the BIOS utility and clear the record.

d
n
u RU
ro T
.G IN
1 .C
2

Getting Started

1-26

JAUD1: Front Panel Audio Connector
This connector allows you to connect the front audio panel located on your computer
case. This connector is compliant with the Intel® Front Panel I/O Connectivity Design
Guide.
ct
te
e
D
e
n
o
n
h
io
P
ct
d
e
a
e in et
.H P D
0 o
1 .N IC
8 .M C nd
6 .N ou
4 r

io
L
e D
n
o N
h E R
P _S ne
d
o
a E h
e NS P
.H E d
9 .S ea R
7 .H IC L
5 .M IC
3 .M
1

This connector is used to connect an optional parallel port bracket. The parallel port
is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended
Capabilities Parallel Port (ECP) mode.

T
C
L
Y
.S
5 E S
2 .P U K# 7
3
2 1.B C ND 6
2 9.A R ND 5
1 7.P R ND 4
1 5.P R ND 3
1 .P
3 R D 2
1 1.P RN D 1
1 .P N D
9 .P R N D0
7 .PR N B#
5 .PR ST
3 .R
1

in
P d
o un d
.N ro un d
6
2 4.G ro un d
2 2.G ro un d
2 .G ro un d
0
2 .G r o u n d
8
#
1 . G r o u n d IN
6
1 .G ro un L
4
S
1 2.G ro _ #
1 .G PT IT
0
1 .L IN #
8 P R #
.
6 R
.E D
4 .AF
2

1-27

Getting Started

Chapter 1

JLPT1: Parallel Port Connector

JCOM1: Serial Port Connector
This connector is a 16550A high speed communication port that sends/receives 16
bytes FIFOs. You can attach a serial device.

in
P
o
.N S
0 T R
1 .C S
8 D R
.
6 T
.D N
4 SI
.
2
I S d
.R T n
9 . R r ou T
7 .G U
5 . SO C D
3 .D
1

Chapter 1
Getting Started

1-28

Jumper
JBAT1: Clear CMOS Jumper
There is CMOS RAM onboard that is external powered from a battery located on the
motherboard to save system configuration data. With the CMOS RAM, the system can
automatically boot into the operating system (OS) every time it is turned on. If you
want to clear the system configuration, set the jumpers to clear the CMOS RAM.

Keep Data

Chapter 1

Clear Data

Important
You can clear the CMOS RAM by shorting this jumper while the system is off.
Afterwards, open the jumper . Do not clear the CMOS RAM while the system is on
because it will damage the motherboard.

1-29

Getting Started

Drivers and Utilities
After you install the operating system you will need to install drivers to maximize the
performance of the new computer you just built. MSI motherboard comes with a Driver
Disc. Drivers allow the computer to utilize your motherboard more efficiently and take
advantage of any special features we provide.
You can protect your computer from viruses by installing the bundled security
program. The bundle also includes a variety of powerful and creative utilities.

Total Installer

Chapter 1

Total Installer is very easy to use and does a great job of finding necessary drivers.
Please follow the steps below to install drivers and utilities for your new computer.
1. Insert MSI Driver Disc into the optical drive. The setup screen will automatically
appear if autorun is enabled in OS.
2. Click Total Installer. A popup dialogue will appear listing all necessary drivers.

Click here
3. Select all checkbox on driver listing dialog.
4. Click Install button.
5. The software installation will then be in progress, after it has finished it will prompt
you to restart.
6. Click OK button to finish.
7. Restart your computer.
You can also use the same method to install the utilities.

Getting Started

1-30

Chapter 2

Quick Installation
This chapter provides demonstration diagrams about how to install your
computer. Some of the installations also provide video demonstrations.
Please link to the URL to watch it with the web browser on your phone or
tablet. You may have even link to the URL by scanning the QR code.

Important
The diagrams in this chapter are for reference only and may vary from the
product you purchased.

CPU Installation

http://youtu.be/bf5La099urI

Chapter 2

Quick Installation

2-2

Chapter 2

2-3

Quick Installation

Memory Installation

http://youtu.be/76yLtJaKlCQ

Chapter 2

Quick Installation

2-4

Motherboard Installation

Chapter 2

2-5

Quick Installation

Chapter 2
Quick Installation

2-6

Power Connectors Installation
1

http://youtu.be/gkDYyR_83I4

Chapter 2

88
E6 SI
M C4
M

88
E6 SI
M C4
M
88
E6 SI
M C4
M

2-7

88
E6 SI
M C4
M

Quick Installation

88
E6 SI
M C4
M

Chapter 2
Quick Installation

2-8

SATA HDD Installation

http://youtu.be/RZsMpqxythc

Chapter 2

88
E6 I
MS 4
MC
88
E6 I
MS 4
MC

88
E6 I
MS 4
MC

8
E68
MSI
MC4

or
88
E6 I
MS 4
MC
88
E6 I
MS 4
MC

88
E6 I
MS 4
MC

8
E68
MSI
MC4

2-9

Quick Installation

mSATA SSD Installation

Chapter 2
Quick Installation

2-10

Front Panel Connector Installation
JFP1 Connecotr Installation

8
E68
MSI
MC4

88
E6 I
MS 4
MC
88
E6 I
MS 4
MC

POWER SW

POWER LED

REST SW

88
E6 I
MS 4
MC

Front Panel Audio Connector Installation

88
E6 SI
M C4
M
88
E6 SI
M C4
M
88
E6 SI
M C4
M

8
E68
MSI
MC4

88
E6 SI
M C4
M

2-11

Quick Installation

Chapter 2

8
E68
MSI
MC4

PWR_SWPWR_SW+
FP PWR/SLP
FP PWR/SLP

HD_LED+
HD_LEDRST_SWRST_SW+
RSVD_DNU

88
E6 I
MS 4
MC

8
E68
MSI
MC4

HD_LED+
HD_LEDRST_SWRST_SW+
RSVD_DNU

H.D.D. LED

http://youtu.be/DPELIdVNZUI

Peripheral Connector Installation
USB2.0 Connector Installation

88
E6 SI
M C4
M

Chapter 2

8
E68
MSI
MC4

E68
MSI
MC4

8
E68
MSI
MC4

8
E68
MSI
MC4
8
E68
MSI
MC4

8
E68
MSI
MC4

88
E6 SI
M C4
M

USB3.0 Connector Installation

88
E6 SI
M C4
M

8
E68
MSI
MC4

88
E6 SI
M C4
M
88
E6 SI
M C4
M
88
E6 SI
M C4
M

Quick Installation

8
E68
MSI
MC4

2-12

8
E68
MSI
MC4
8
E68
MSI
MC4

8
E68
MSI
MC4

Graphics Card Installation

http://youtu.be/mG0GZpr9w_A

Chapter 2

2-13

Quick Installation

Chapter 2
5

Quick Installation

2-14

Chapter 3

BIOS Setup
CLICK BIOS is a revolutionary UEFI interface that allows you to setup and
configure your system for optimum use. Using your mouse and keyboard,
users can change BIOS settings, monitor CPU temperature, select the boot
device priority and view system information such as the CPU name, DRAM
capacity, the OS version and the BIOS version. Users can import and export
parameter data for backup or for sharing with friends. By connecting to the
Internet within CLICK BIOS, users can browse webpages, check mail and use
Live Update in your system.

Important

• The items under each BIOS category described in this chapter are
under continuous update for better system performance. Therefore, the
description may be slightly different from the latest BIOS and should be held
for reference only.
• The pictures in this chpater are for reference only and may vary from the
product you purchased. Please refer to the actual screens of your system
for detailed information.
• Please clear the CMOS data and restore the default settings if the system
becomes unbootable after changing BIOS settings. (Refer to the Clear
CMOS jumper/ button section to clear the CMOS data, select the "Restore
Defaults" and press in BIOS to load the default settings.)

Entering Setup
The default settings offer the optimal performance for system stability in normal
conditions. You may need to run the Setup program when:
■ An error message appears on the screen during the system booting up, and
requests you to run SETUP.
■ You want to change the default settings for customized features.

Important

• Please load the default settings to restore the optimal system performance and
stability if the system becomes unstable after changing BIOS settings. Select the
"Restore Defaults" and press in BIOS to load the default settings.
• Please clear the CMOS data and restore the default settings if the system becomes
unbootable after changing BIOS settings. (Refer to the Clear CMOS jumper/ button
section to clear the CMOS data, select the "Restore Defaults" and press in
BIOS to load the default settings.)
• If you are unfamiliar with the BIOS settings, we recommend that you keep the
default settings to avoid possible system damage or failure booting due to
inappropriate BIOS configuration.

Entering BIOS Setup
Power on the computer and the system will start the Power On Self Test (POST)
process. When the message below appears on the screen, please key to enter
BIOS:

Press DEL key to enter Setup Menu, F11 to enter Boot Menu

Chapter 3

If the message disappears before you respond and you still need to enter BIOS,
restart the system by turning the computer OFF then back ON or pressing the RESET
button. You may also restart the system by simultaneously pressing , , and
keys.
MSI additionally provides two methods to enter the BIOS setup. You can click the
“GO2BIOS” tab on “MSI Fast Boot” utility screen or press the physical “GO2BIOS"
button (optional) on the motherboard to enable the system going to BIOS setup
directly at next boot.

Click "GO2BIOS" tab on
"MSI Fast Boot" utility
screen.

Important

Please be sure to install the “MSI Fast Boot” utility before using it to enter the BIOS
setup.

BOIS Setup

3-2

Overview
After entering BIOS, the following screen is displayed.
Temperature monitor

Language

Model
name
Virtual OC
Genie Button

System
information

Boot device
priority bar

BIOS menu
selection
BIOS menu
selection

▶ Temperature monitor
Shows the temperatures of the processor and the motherboard.
▶ Language
Allows you to select the language of the BIOS setup.
▶ System information
Shows the time, date, CPU name, CPU frequency, DRAM frequency, DRAM capacity
and the BIOS version.
▶ BIOS menu selection
The following options are available:
■ SETTINGS - Uses this menu to specify the parameters for chipset and boot
devices.
■ OC - This menu contains the frequency and voltage adjustments. Increasing
the frequency can get better performance, however high frequency and heat
can cause instability, we do not recommend general users to overclock.
■ M-FLASH - This menu provides the way to update BIOS with a USB flash
disk.
■ OC PROFILE -This menu is used to set various overclocking profiles.
■ HARDWARE MONITOR - This menu is used to set the speeds of fans and
monitor voltages of system.
■ BOARD EXPLORER - It will provide the information of the installed devices on
the motherboard.

3-3

BIOS Setup

Chapter 3

Menu display

▶ Boot device priority bar
You can move the device icons to change the boot priority.

High priority

Low priority

▶ Menu display
This area provides BIOS settings and information to be configured.
▶ Virtual OC Genie Button
Enables or disables the OC Genie function by clicking on this button. When enabled,
this button will be light. Enabling OC Genie function can automatically overclock with
MSI optimized overclocking profile.

Important

• We recommend that you do not to make any modification in OC menu and do not to
load defaults after enabling the OC Genie function.
• Updating BIOS or clearing CMOS is not allowed in OC Genie mode, and it may
cause OC Genie function fail or other effect.
▶ Model Name
Shows the model name of motherboard.

General Help

Chapter 3

Sub-Menu

Scroll bar

▶ Sub-menu
If you find a point symbol to the left of certain items, that means a sub-menu can be
launched for additional options. You can use the arrow keys or mouse to highlight the
item and press or double-click the left mouse button to enter the sub-menu.
▶ Scroll bar
Slide the scroll bar or use the arrow keys to display the other items that are available
on the "menu display" area.
▶ General Help
The General Help displays a brief description to assist you in grasping the selected
item.

BOIS Setup

3-4

Operation
You can control BIOS settings with the mouse and the keyboard. The following table
lists and describes the hot keys and the mouse operations.
Hot key

Mouse

<↑↓→← >

Description
Select Item

.
Move the cursor

Select Icon/ Field

Click/ Double-click
the left button

Jump to the Exit menu or return to the previous
from a submenu

<+>

Increase the numeric value or make changes

<->

Decrease the numeric value or make changes

General Help

CPU Specifications

Enter Memory-Z

Load optimized defaults

OC Profile Load From USB

OC Profile Save to USB

Save Change and Reset

Save a screenshot to a FAT/FAT32 USB drive

3-5

BIOS Setup

Chapter 3

Click the right button

SETTINGS

System Status
▶ System Date
Sets the system date. Use tab key to switch between date elements.
The format is .

Day of the week, from Sun to Sat, determined by BIOS. Read-only.

The month from Jan. through Dec.

The date from 1 to 31 can be keyed by numeric function keys.

The year can be adjusted by users.

Chapter 3

▶ System Time
Sets the system time. Use tab key to switch between time elements.
The time format is .
▶ SATA Port
Show the information of connected SATA device.

Important

If the connected SATA device is not displayed, turn off computer and re-check SATA
cable and power cable connections of the device and motherboard.
▶ System Information
Shows detailed system information, including CPU type, BIOS version, and Memory
(read only).

BOIS Setup

3-6

Advanced
▶ PCI Subsystem Settings
Sets PCI, PCI express interface protocol and latency timer. Press to enter the
sub-menu.
▶ PEG0/ 1 - Gen X [Auto]
Sets PCI Express protocol for matching different installed devices. PEG0 and
PEG1 are as first and second PCIe x16 slots.
[Auto]
Enables all PCIe Gen1, Gen2 and Gen3. supports.
[Gen1]
Enables PCIe Gen1 support only.
[Gen2]
Enables PCIe Gen2 support only.
[Gen3]
Enables PCIe Gen3 support only.
▶ PCI Latency Timer [32]
Sets latency timer of PCI interface device.
[Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks]
▶ ACPI Settings
Sets ACPI parameters of onboard power LED behaviors. Press to enter the
sub-menu.
▶ Power LED [Blinking]
Sets shining behaviors of the onboard Power LED.
[Dual Color] The power LED turns to another color to indicate the S3 state.
[Blinking]
The power LED blinks to indicate the S3 state.
▶ Integrated Peripherals
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press
to enter the sub-menu.

▶ LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings.
This item will appear when "Onboard LAN Controller" is enabled.
[Enabled]
Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.
▶ Network Stack [Disabled]
Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled]
Enables UEFI network stack.
[Disabled] Disables UEFI network stack.
▶ Ipv4 PXE Support [Enabled]
When “Enabled”, the system UEFI network stack will support Ipv4 protocol. This
item will appear when “Network Stack” is enabled.
[Enabled]
Enables the Ipv4 PXE boot support.
[Disabled]
Disables the Ipv4 PXE boot support.

3-7

BIOS Setup

Chapter 3

▶ Onboard LAN Controller [Enabled]
Enables or disables the onboard LAN controller.

▶ Ipv6 PXE Support [Enabled]
When “Enabled”, the system UEFI network stack will support Ipv6 protocol. This
item will appear when “Network Stack” is enabled.
[Enabled]
Enables the Ipv6 PXE boot support.
[Disabled]
Disables the Ipv6 PXE boot support.
▶ SATA Mode [AHCI Mode]
Sets the operation mode of the onboard SATA controller. The default mode is
AHCI.
[Disabled]
Disables the SATA function.
[IDE Mode] Specify the IDE mode for SATA storage devices.
[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced
Host Controller Interface) offers some advanced features to enhance
the speed and performance of SATA storage device, such as Native
Command Queuing (NCQ) and hot-plugging.
[RAID Mode]* Enables RAID function for SATA storage devices.
* B85-G43 does not support RAID mode.
▶ SATA1~6 Hot Plug [Disabled]
Allows user to enable or disable the SATA hot plug support. This item will appear
when the “SATA Mode” set to [AHCI]/ [RAID].
[Enabled]
Enables hot plug support for the SATA ports.
[Disabled] Disables hot plug support for the SATA ports.
▶ HD Audio Controller [Enabled]
Enables or disables the onboard High Definition Audio controller.
▶ HPET [Enabled]
Enables or disables the HPET (High Precision Event Timers) support.
▶ Integrated Graphics Configuration
Adjusts integrated graphics settings for optimum system. Press to enter the
sub-menu.

Chapter 3

▶ Initiate Graphic Adapter [PEG]
Selects a graphics device as the primary boot device.
[IGD]
Integrated Graphics Display.
[PEG]
PCI-Express Graphics Device.
▶ Integrated Graphics Share Memory [64M]
Selects a fixed amount of system memory allocated to the onboard graphics. This
item defines the exact memory size shared to the onboard graphics. [Options: 32M,
64M, 128M, 256M]
▶ DVMT Memory [256MB]
DVMT memory can dynamically allocate system memory for running graphicsintensive applications, such as 2D/3D games. [Options: 128MB, 256MB, Maximum]

BOIS Setup

3-8

▶ IGD Multi-Monitor [Disabled]
Enables or disables the multi-screen output from integrated graphics and external
graphics card. To support the Lucid Virtu MVP Technology, please enable this
item.
[Enabled]
Enables IGD multi-screen function.
[Disabled] Disables IGD multi-screen function.
▶ Intel(R) Rapid Start Technology
Sets Intel® Rapid Start Technology for optimizing the system resume operation. Press
to enter the sub-menu.
▶ Intel(R) Rapid Start Technology [Disabled]
Intel® Rapid Start Technology lets the system resume from sleep mode quickly.
This function is available when an SSD is installed.
[Enabled]
Enables Intel Rapid Start Technology.
[Disabled] Disables Intel Rapid Start Technology.
▶ Entry on S3 RTC Wake [Enabled]
Enables or disables to support S3 RTC wake up with Intel Rapid Start Technology.
This item will appear when “Intel(R) Rapid Start Technology” is enabled.
[Enabled]
Allows the system to enter the sleep mode with Intel Rapid Start
Technology.
[Disabled] Disables this function.
▶ Entry After [10 minutes]
Sets a timer for system to enter the sleep mode with Intel Rapid Start
Technology. This item will appear when “Intel(R) Rapid Start Technology” is
enabled. [Options: 1 minute ~ 120 minutes]

▶ Active Memory Threshold
Sets Rapid Start partition size for Active Page Threshold. This item will appear
when “Active Page Threshold Support” is enabled.

Important

The partition size must be larger then the amount of memory.
▶ Hybrid Hard Disk Support [Disabled]
Enables or disables the Intel Rapid Start Technology to support hybrid hard disk
drive.
[Enabled]
Enables hybrid hard disk support.
[Disabled] Disables hybrid hard disk support.

3-9

BIOS Setup

Chapter 3

▶ Active Page Threshold Support [Enabled]
Enables or disables to support Active Page Threshold when the Rapid Start
partition size is less than the system DRAM size.
[Enabled]
Enables the additional partition size of SSD for iRST.
[Disabled] Disables this function.

▶ RapidStart Display Save/Restore [Enabled]
Enables or disables the Intel Rapid Start Display screen to be saved or restored.
The screen will be saved before the system enters sleep mode. Then the system
will restore the screen when wakened.
[Enabled]
Enables this function.
[Disabled] Disables this function.
▶ RapidStart Display Type [BIOS Save/Restore]
Selects the screen type of Intel Rapid Start Display.
[BIOS Save/Restore]
The BIOS POST splash screen will be saved/ restored.
[DeskTop Save/Restore] The desktop image will be saved/ restored.
▶ LakeTiny Feature [Disabled]
Enables or disables Intel Lake Tiny technology with iRST for SSD. This item
appears when "Intel C-State" is enabled.
[Enabled]
Enhance the dynamic IO load adjusted performance for accelerating
the SSD speed.
[Disabled]
Disables this feature.
▶ USB Configuration
Sets the onboard USB controller and device function. Press to enter the submenu.
▶ USB Controller [Enabled]
Enables or disables the onboard USB controller.
▶ Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto]
The system will automatically detect if any USB device is connected
and enables or disables the legacy USB support.
[Enabled]
Enable the USB support for legacy operating systems that do not
support USB.
[Disabled] The USB devices are available only for UEFI applications.

Chapter 3

▶ Super IO Configuration
Sets system Super I/O chip parameters including LPT and COM ports. Press
to enter the sub-menu.
▶ Serial (COM) Port 0 Configuration
Sets detailed configuration of serial(COM) port 0. Press to enter the submenu.
▶ Serial (COM) Port 0 [Enabled]
Enables or disables serial (COM) port 0.
▶ Serial (COM) Port 0 Settings [Auto]
Sets serial port 0 (COM). If set to "Auto", BIOS will optimize the IRQ
automatically or you can set it manually.
▶ Parallel (LPT) Port Configuration
Sets detailed configuration of parallel port (LPT). Press to enter the submenu.

BOIS Setup

3-10

▶ Parallel (LPT) Port [Enabled]
Enables or disables parallel(LPT) port.
▶ Parallel (LPT) Port Settings [Auto]
Sets parallel port (LPT). If set to "Auto", BIOS will optimize the IRQ
automatically or you can set it manually.
▶ Device Mode [Printer Mode]
Selects an operating mode for parallel port.
[Printer Mode]
Printer port mode
[SPP]
Standard Parallel Port mode
[EPP-1.9/ 1.7 + SPP] Enhanced Parallel Port-1.9/ 1.7 mode + Standard

Parallel Port mode.
[ECP]
Extended Capability Port mode
[ECP + EPP-1.9/ 1.7] Extended Capability Port mode + Enhanced Parallel

Port-1.9/ 1.7 mode.
▶ Intel(R) Smart Connect Configuration
Sets Intel Smart Connect Technology for optimizing system network performance in
sleep mode. Press to enter the sub-menu.
▶ Intel(R) Smart Connect Technology [Enabled]
Enables or disables Intel(R) Smart Connect Technology. This feature can update
applications (ex. email and social networks) by periodically waking your system
from sleep mode. And you do not need to wait for the applications to update when
you wake up the system.
[Enabled]
Enables Intel smart connect technology.
[Disabled] Disables Intel smart connect technology.

▶ EuP 2013 [Disabled]
Enables or disables the system power consumption according to EuP2013
regulation.
[Enabled]
Optimize the system power consumption according to EuP 2013
regulation.
[Disabled] Disables this function.
Note: When enabled, the system will not support RTC wake up event functions.
▶ Restore after AC Power Loss [Power Off]
Sets the system behaviors while encountering the AC power loss.
[Power Off] Leaves the system in power off state after restoring AC power.
[Power On] Boot up the system after restoring AC power.
[Last State] Restores the system to the previous state (power on/ power off)
before AC power loss.

3-11

BIOS Setup

Chapter 3

▶ Power Management Setup
Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press
to enter the sub-menu.

▶ Windows 8 Configuration
Sets Windows 8 detailed configuration and behaviors. Press to enter the submenu.
▶ Windows 8 Feature [Disabled]
Enables the supports for Windows 8 or disables for other operating systems.
Before enabling this item, make sure all installed devices & utilities (hardware &
software) should meet the Windows 8 requirements.
[Enabled]
The system will switch to UEFI mode to meet the Windows 8
requirement.
[Disabled] Disables this function.
▶ MSI Fast Boot [Disabled]
MSI Fast Boot is the fastest way to boot the system. When enabled, the USB, PS2
and SATA devices will not be detected while booting.
[Enabled]
Enables the MSI Fast Boot function to minimize booting time. And
the following related "Fast Boot" items will be disabled and fixed.
[Disabled] Disables MSI Fast Boot.

Important

If you want to enter BIOS with enabled “MSI Fast Boot” mode, you have to click
the "GO2BIOS" tab on MSI Fast Boot utility screen or press the "GO2BIOS" button
(optional) on the motherboard. And then the system will enter to BIOS setup directly at
next boot.
▶ Fast Boot [Enabled for Windows 8, Disabled for other OS]
Windows 8 fast boot allows user to enable or disable the USB, PS2 and SATA
devices to accelerate system boot. This item will only be available when "MSI Fast
Boot" is disabled.
[Enabled]
Enables the Fast Boot configuration.
[Disabled] Disables the Fast Boot configuration.

Chapter 3

▶ USB Support [Full Initial]
Disabling the USB devices temporarily during POST will accelerate the system
boot. The USB devices will be available after entering the operating system. This
item will appear when “Fast Boot” is enabled.
[Disabled] Disables the USB devices during POST for faster boot time.
[Full Initial] Enables the USB devices during POST.
▶ PS2 Devices Support [Enabled]
Disabling the PS2 devices temporarily during POST will accelerate the system
boot. The PS2 devices will be available after entering the operating system. This
item will appear when “Fast Boot” is enabled.
[Disabled] Disables the PS2 devices during POST for faster boot time.
[Enabled]
Enables the PS2 devices during POST.

BOIS Setup

3-12

Important

If you disable the PS/2 or USB devices and you want to enter BIOS with PS/2 or USB
keyborard, you have to click the "GO2BIOS" tab on MSI Fast Boot utility screen or
press the "GO2BIOS" button (optional) on the motherboard. And then the system will
enter to BIOS setup directly at next boot.
▶ SATA Device Support [Enabled]
Disabling the SATA devices temporarily during POST will accelerate the system
boot. The SATA devices will be available after entering the operating system. This
item will appear when “Fast Boot” is enabled.
[Disabled] Disables the SATA devices during POST for faster boot time.
[Enabled]
Enables the SATA devices during POST.
▶ Internal GOP Configuration
Manages the onboard Graphics Output Protocol (GOP). Press to enter
the sub-menu. This menu shows the iGFX Driver version for system information
management. This sub-menu will appear when “Windows 8 Feature” is enabled.
▶ Secure Boot
Sets the Windows secure boot to prevent the unauthorized accessing. Press
to enter the sub-menu. This sub-menu will appear when “Windows 8
Feature” is enabled.

▶ Secure Boot Mode [Standard]
Selects the secure boot mode. This item is to select how the secure boot keys
be loaded. This item appears when "Secure Boot" is enabled.
[Standard] The system will automatically load the secure keys from BIOS.
[Custom]
Allows user to configure the secure boot settings and manually
load the secure keys.
▶ Image Execution Policy
Sets the policy when the system image execution policy on Security Violation.
Press to enter the sub-menu. This sub-menu will appear when “Secure
Boot Mode” sets to [Custom].
▶ Key Management
Manages the secure boot keys. Press to enter the sub-menu. This submenu will appear when “Secure Boot Mode” sets to [Custom].
▶ Wake Up Event Setup
Sets system wake up behaviors for different sleep modes. Press to enter the
sub-menu.

3-13

BIOS Setup

Chapter 3

▶ Secure Boot Control [Disabled]
Enables or disables secure boot.
[Enabled]
Enables the secure boot function and allow you to set the secure
boot settings.
[Disabled]
Disables this function.

▶ Wake Up Event By [BIOS]
Selects the wake up event by BIOS or operating system.
[BIOS]
Activates the following items, and use these items to set the wake up
events.
[OS]
The wake up events will be defined by OS.
▶ Resume By RTC Alarm [Disabled]
Disables or enables the system wake up by RTC Alarm.
[Enabled]
Enables the system to boot up on a scheduled time/ date.
[Disabled]
Disables this function.
▶ Date (of month) Alarm/ Time (hh:mm:ss) Alarm
Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the
system will automatically resume (boot up) on a specified date/hour/minute/second
in these fields (using the <+> and <-> to select the date & time settings).
▶ Resume By PCI or PCI-E Device [Disabled]
Disables or enables the system wake up by PCI or PCI express device.
[Enabled]
Enables the system to be awakened from the power saving modes
when activity or input signal of PCI/ PCIe device is detected.
[Disabled]
Disables this function.
▶ Resume By Onboard LAN [Disabled]
Disables or enables the system wake up by Onboard LAN.
[Enabled]
Enables the system to be awakened from the power saving modes
when activity or input signal of LAN device is detected.
[Disabled]
Disables this function.
▶ Resume From S3 by USB Device [Disabled]
Disables or enables the system wake up by USB devices.
[Enabled]
Enables the system to be awakened from S3 (Suspend to RAM)
sleep state when activity of USB device is detected.
[Disabled]
Disables this function.

Chapter 3

▶ Resume From S3/S4/S5 by PS/2 Mouse [Disabled]
Disables or enables the system wake up by PS/2 mouse.
[Enabled]
Enables the system to be awakened from S3/ S4/ S5 state when
activity of PS/2 mouse is detected.
[Disabled]
Disables this function.
▶ Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]
Disables or enables the system wake up by PS/2 keyboard.
[Any Key]
Enables the system to be awakened from S3/ S4/ S5 state when
activity of any key on PS/2 keyboard is detected.
[Hot Key]
Enables the system to be awakened from S3/ S4/ S5 state when
activity of hot key on PS/2 keyboard is detected.
[Disabled]
Disables this function.
▶ Realtek PCIe GBE Family Controller
Shows driver information and configures ethernet controller parameter. Press
to enter the sub-menu.

BOIS Setup

3-14

Boot
Sets the sequence of system boot devices.
▶ Full Screen Logo Display [Enabled]
Enables or disables to show the full screen logo while system POST.
[Enabled]
The OS boots straight to the GUI without showing the POST screen.
[Disabled]
Shows the POST messages at booting.
▶ Boot Mode Select [LEGACY+UEFI]
Sets the system boot mode from legacy or UEFI architecture depending on OS
installation requirement.
[UEFI]
Enables UEFI BIOS boot mode support only.
[LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot

mode.
▶ FIXED BOOT ORDER Priorities
Sets device priority for system boot.
▶ Boot Option #1~N
These items are used to prioritize the installed boot devices.

Security
▶ Administrator Password
Sets administrator password for system security. Enters the administrator password if
set; user has full rights to change the BIOS items.
▶ User Password
Sets User Password for system security. Enters the user password if set; but user
might have limited rights to change the BIOS items.

To clear a set password, press when you are prompted to enter a new
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.
▶ U-Key [Disabled]
Enables or disables U-Key as user's password to access the system.
▶ Make U-Key at
Makes a key at the USB flash drive to prevent other people from accessing the
system. Only the user who has the key with the flash drive can access the system.

3-15

BIOS Setup

Chapter 3

Important

When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press . The password typed now will
replace any previous set password from CMOS memory. You will be prompted to
confirm the password. You may also press to abort the selection.

▶ Trusted Computing
Sets TPM (Trusted Platform Module) function.
▶ TPM SUPPORT [Disabled]
Enables or disables the TPM function to build the endorsement key for accessing
the system.
▶ Chassis Intrusion Configuration
Press to enter the sub-menu.
▶ Chassis Intrusion [Disabled]
This function will be available if the chassis equips a chassis intrusion switch.
Once the chassis is opened, the system will record and issue a warning message.
To clear the warning message, set the item to [Reset], then it will return to
[Enabled] later. [Options: Disabled, Enabled, Reset]

Save & Exit
▶ Discard Changes and Exit
Exit BIOS setup without saving any change. This it is used to abandon all changes
and exit BIOS setup.
▶ Save Changes and Reboot
This item is used to save all changes and reboot the system.
▶ Save Changes
This item is used to save current changes.
▶ Discard Changes
This item is used to discard current all changes and restore to the previous values.
▶ Restore Defaults
This item is used to restore/ load all default values by the BIOS vendor.
▶ Boot Override
The installed boot-able devices will appear on this menu, you can select one of them
be a boot device to start booting.

Chapter 3
BOIS Setup

3-16

Important

• Overclocking your PC manually is only recommended for advanced users.
• Overclocking is not guaranteed, and if done improperly, can void your warranty or
severely damage your hardware.
• If you are unfamiliar with overclocking, we advise you to use OC Genie for easy
overclocking.

▶ CPU Base Clock (MHz) [Default]
Sets the CPU Base clock. You may overclock the CPU by adjusting this value. Please
note that overclocking behavior and stability is not guaranteed. This item appears
when the installed processor supports this function.
▶ Current CPU Base Clock Strap (Z87-G43)
Shows the current CPU Base clock strap. Read only. This item can only be changed if
the processor supports this function.
▶ Adjust CPU Base Clock Strap [Auto] (Z87-G43)
Sets the CPU Base Clock Strap. You may overclock the CPU Base Clock by adjusting
this value. Please note that overclocking behavior and stability is not guaranteed.
This item can only be changed if the processor supports this function. If set to "Auto",
BIOS will configure this setting automatically. [Options: Auto, 1.00, 1.25, 1.67]

3-17

BIOS Setup

Chapter 3

▶ Current CPU/ DRAM/ Ring Frequency
These items show the current frequencies of installed CPU and Memory. Read-only.

▶ CPU Base Clock Apply Mode [Auto]
Sets the applying mode for adjusted CPU base clock.
[Auto]
This setting will be configured automatically by BIOS.
[Next Boot] CPU will run the adjusted CPU base clock after reboot.
[Immediate] CPU runs the adjusted CPU base clock immediately.
▶ CPU PCIE PLL [Auto] (Z87-G43)
Selects a PLL (Phase Lock Loop) mode for CPU PCIe. This item appears when the
installed CPU supports this setting.
[Auto]
This setting will be configured automatically by BIOS.
[LC PLL]
Enables LC PLL for normal usage.
[SB PLL]
Enables SB PLL for extreme overclocking.
▶ Filter PLL [Auto] (Z87-G43)
Enables or disables the filter PLL for CPU. This item appears when the installed CPU
supports this setting.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled]
Provides wide range of base clock for overclocking when base clock
strap be set to higher value.
[Disabled]
Provides normal range of base clock.
▶ CPU Ratio Mode [Auto]
Selects the CPU Ratio operating mode.
[Auto]
This setting will be configured automatically by BIOS.
[Fixed Mode]
Fixes the CPU ratio.
[Dynamic Mode] CPU ratio will be changed dynamically according to the CPU

loading.
▶ Adjust CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be
changed if the processor supports this function.
▶ Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.

Chapter 3

▶ EIST [Enabled]
Enables or disables the Enhanced Intel® SpeedStep Technology.
[Enabled]
Enables the EIST to adjust CPU voltage and core frequency
dynamically. It can decrease average power consumption and average
heat production.
[Disabled] Disables EIST.
▶ Intel Turbo Boost [Enabled]
Enables or disables the Intel® Turbo Boost. This item appears when the installed CPU
supports this function.
[Enabled]
Enables this function to boost CPU performance automatically above
rated specifications when system request the highest performance
state.
[Disabled] Disables this function.

BOIS Setup

3-18

▶ Enhanced Turbo [Auto]
Enables or disables Enhanced Turbo function for all CPU cores to boost CPU
performance.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled]
All CPU cores would be increased to maximum turbo ratio.
[Disabled] Disables this function.
▶ Adjust Ring Ratio [Auto]
Sets the ring ratio. The valid value range depends on the installed CPU.
▶ Adjusted Ring Frequency
Shows the adjusted Ring frequency. Read-only.
▶ Adjust GT Ratio [Auto]
Sets the integrated graphics ratio. The valid value range depends on the installed
CPU.
▶ Adjusted GT Frequency
Shows the adjusted integrated graphics frequency. Read-only.
▶ DRAM Reference Clock [Auto]
Sets the DRAM reference clock. The valid value range depends on the installed CPU.
This item appears when a CPU that supports this adjustment is installed.
▶ DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.

▶ Extreme Memory Profile (X.M.P) [Disabled]
X.M.P. (Extreme Memory Profile) is the overclocking technology by memory module.
This item will be available when you install the memory modules that support X.M.P.
technology.
[Disabled]
Disables this function.
[Profile 1]
Uses profile1 over-clocking settings of installed XMP memory module.
[Profile 2]
Uses profile2 over-clocking settings of installed XMP memory module.
▶ DRAM Timing Mode [Auto]
Selects the memory timing mode.
[Auto]
DRAM timings will be determined based on SPD (Serial Presence
Detect) of installed memory modules.
[Link]
Allows user to configure the DRAM timing manually for all memory
channel.
[UnLink]
Allows user to configure the DRAM timing manually for respective
memory channel.
▶ Advanced DRAM Configuration
Press to enter the sub-menu. This sub-menu will be activated after setting
[Link] or [Unlink] in “DRAM Timing Mode”. User can set the memory timing for each
memory channel. The system may become unstable or unbootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.)

3-19

BIOS Setup

Chapter 3

▶ Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.

▶ DRAM Training Configuration
Press to enter the sub-menu. Enables or disables the various training ways of
DRAM. The system may become unstable or unbootable after changing these items
in this sub-menu. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.)
▶ Memory Fast Boot [Auto]
Enables or disables the initiation and training for memory every booting.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled]
Memory will completely imitate the archive of first initiation and first
training. After that, the memory will not be initialed and trained when
booting to accelerate the system booting time.
[Disabled]
The memory will be initialed and trained every booting.
▶ DigitALL Power
Press to enter the sub-menu. Controls the digital powers related to CPU
PWM.
▶ CPU Phase Control [Auto]
Controls PWM phase proportionally to the CPU loading. If set to "Auto", BIOS will
optimize the CPU PWM phase automatically.
[Auto]
This setting will be configured automatically by BIOS.
[Disabled]
Disables the PWM power phase switching feature.
▶ CPU Vdroop Offset Control [Auto]
Sets a percentage of offset voltage for CPU vdroop. If set to "Auto", BIOS will
configure this setting automatically. [Options: Auto, +12.5%, +25%, +37.5%, +50%,
+62.5%, +75%, +87.5%, +100%]
▶ CPU Over Voltage Protection [Auto]
Sets the voltage limit for CPU over-voltage protection. If set to "Auto", BIOS will
configure this setting automatically. Higher voltage provides less protection and
may damage the system.

Chapter 3

▶ CPU Under Voltage Protection [Auto]
Sets the voltage limit for CPU under-voltage protection. If set to "Auto", BIOS will
configure this setting automatically. Higher voltage provides less protection and
may damage the system.
▶ CPU Over Current Protection [Auto]
Sets the current limit for CPU over-current protection. If set to "Auto", BIOS will
configure this setting automatically. Higher percentage provides less protection and
may damage the system.
▶ Phase Over Current Protection [Enabled]
Enables or disables the phase over-current protection.
[Enabled]
Sets the current limit on the phase for over-current protection.
[Disabled]
Disables this function.

BOIS Setup

3-20

▶ CPU Switching Frequency [Auto]
Sets the PWM working speed to stabilize CPU Core voltage and minimize ripple
range. Increasing the PWM working speed will cause higher temperature of
MOSFET. So please make sure a cooling solution is well-prepared for MOSFET
before you increase the value. If set to "Auto", BIOS will configure this setting
automatically.
▶ CPU VRM Over Temperature Protection [Enabled]
Enables or disables the CPU VRM over-temperature protection.
[Enabled]
Sets the temperature limit on CPU VRM for over-temperature
protection.
[Disabled]
Disables this function.
▶ Digital Compensation Level [Auto]
Sets the current compensation level for CPU PWM when the MOS phases are
changed. If set to "Auto", BIOS will configure this setting automatically. Higher
compensation level provides more overclocking ability.
▶ Imon Overwrite [Auto]
Sets the Imon current for CPU.
[Auto]
This setting will be configured automatically by BIOS.
[Quarter]
Sets the Imon current into quarter.
[Half]
Sets the Imon current into half.
[Disabled]
Sets the default values for Imon current.

▶ SVID Communication [Auto]
Enables or disables SVID (Serial Voltage Identification) support.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled]
PWM phase will be changed dynamically according to the CPU SVID
(Serial Voltage Identification).
[Disabled]
Disables SVID (Serial Voltage Identification) support.
▶ VCCIN Voltage [Auto]
Sets the CPU input voltage. The CPU input voltage is the CPU power source that is
shared with components of the CPU.
▶ Current VCCIN Voltage
Shows current CPU VCCIN voltage. Read-only.
▶ CPU Core Voltage Mode/ CPU Ring Voltage Mode/ CPU GT Voltage Mode [Auto]
Selects the control modes for these voltages.
[Auto]
This setting will be configured automatically by BIOS.
[Adaptive Mode] Sets adaptive voltages automatically for optimizing the system

performance.
[Override Mode]
Allows you to set these voltages manually.

3-21

BIOS Setup

Chapter 3

▶ Transient Boost [Disabled]
Enables or disables the transient boost.
[Enabled]
Enables this function may lead into a stable system under heavy
system loading.
[Disabled]
Disables this function.

▶ CPU Core Voltage/ CPU Ring Voltage/ CPU GT Voltage [Auto]
Sets these voltages. If set to "Auto", BIOS will set these voltages automatically or you
can set it manually.
▶ CPU Core Voltage Offset Mode/ CPU Ring Voltage Offset Mode/ CPU GT Voltage
Offset Mode/ CPU SA Voltage Offset Mode/ CPU IO Analog Voltage Offset Mode/
CPU IO Digital Voltage Offset Mode [Auto]
Selects the voltage offset modes.
[Auto]
This setting will be configured automatically by BIOS.
[+]
Allows you to set the positive offset voltage.
[-]
Allows you to set the negative offset voltage.
▶ CPU Core Voltage Offset/ CPU Ring Voltage Offset/ CPU GT Voltage Offset/ CPU
SA Voltage Offset/ CPU IO Analog Voltage Offset/ CPU IO Digital Voltage Offset
[Auto]
Set the offset values for these voltages.
▶ Current CPU Core Voltage/ Current CPU Ring Voltage/ Current CPU GT Voltage/
Current CPU SA Voltage/ Current CPU IO Digital Voltage
Show the current voltages. Read-only.
▶ Internal VR OVP OCP Protection [Auto]
Enables or disables the over-voltage protection and over-current protection for CPU
internal VR (Voltage Regulator).
[Auto]
This setting will be configured automatically by BIOS.
[Enabled]
Sets the voltage limit on the CPU internal VR for over-voltage protection
and over-current protection.
[Disabled]
Disables this function for overclocking.
▶ Internal VR Efficiency Management [Auto]
Enables or disables the CPU internal VR efficiency management.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled]
Enables the VR effciency management for power-saving control.
[Disabled]
Disables this function.

Chapter 3

▶ DRAM Voltage [Auto]
Sets the memory voltage. If set to "Auto", BIOS will set memory voltage automatically
or you can set it manually.
▶ Current DRAM Voltage
Shows current memory voltage. Read only.
▶ DDR_VREF_CA/ DDR_VREF_DQ_A/ DDR_VREF_DQ_B/ PCH 1.05 Voltage/ PCH
1.5 Voltage
Set these voltages. If set to "Auto", BIOS will set these voltages automatically or you
can set it manually.
▶ Current PCH 1.05 Voltage
Shows current PCH 1.05 voltage. Read only.

BOIS Setup

3-22

▶ CPU Memory Changed Detect [Enabled]
Enables or disables the system to issue a warning message during boot when the
CPU or memory has been replaced.
[Enabled]
The system will issue a warning message during boot and than needs
to load the default settings for new devices.
[Disabled]
Disables this function and keeps the current BIOS settings.
▶ Spread Spectrum
This function reduces the EMI (Electromagnetic Interference) generated by modulating
clock generator pulses.
[Enabled]
Enables the spread spectrum function to reduce the EMI
(Electromagnetic Interference) problem.
[Disabled]
Enhances the overclocking ability of CPU Base clock.

Important

• If you do not have any EMI problem, leave the setting at [Disabled] for optimal
system stability and performance. But if you are plagued by EMI, select the value of
Spread Spectrum for EMI reduction.
• The greater the Spread Spectrum value is, the greater the EMI is reduced, and
the system will become less stable. For the most suitable Spread Spectrum value,
please consult your local EMI regulation.
• Remember to disable Spread Spectrum if you are overclocking because even a
slight jitter can introduce a temporary boost in clock speed which may just cause
your overclocked processor to lock up.
▶ CPU Specifications
Press to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.

▶ MEMORY-Z
Press to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory. You can also access this information menu at any time by
pressing [F5].
▶ DIMM1~4 Memory SPD
Press to enter the sub-menu. The sub-menu displays the information of
installed memory. Read only.
▶ CPU Features
Press to enter the sub-menu.

3-23

BIOS Setup

Chapter 3

▶ CPU Technology Support
Press to enter the sub-menu. The sub-menu shows what the key features
does the installed CPU support. Read only.

▶ Hyper-Threading Technology [Enabled]
The processor uses Hyper-Threading technology to increase transaction rates
and reduces end-user response times. Intel Hyper-Threading technology treats
the multi cores inside the processor as multi logical processors that can execute
instructions simultaneously. In this way, the system performance is highly
improved.
[Enable]
Enables Intel Hyper-Threading technology.
[Disabled] Disables this item if the system does not support HT function.
▶ Active Processor Cores [All]
This item allows you to select the number of active processor cores.
▶ Limit CPUID Maximum [Disabled]
Enables or disables the extended CPUID value.
[Enabled]
BIOS will limit the maximum CPUID input value to circumvent
boot problems with older operating system that do not support the
processor with extended CPUID value.
[Disabled]
Use the actual maximum CPUID input value.
▶ Execute Disable Bit [Enabled]
Intel’s Execute Disable Bit functionality can prevent certain classes of malicious
“buffer overflow” attacks where worms attempt to execute code to damage the
system. It is recommended that keeps this item enabled always.
[Enabled]
Enables NO-Execution protection to prevent the malicious attacks
and worms.
[Disabled]
Disables this function.
▶ Intel Virtualization Tech [Enabled]
Enables or disables Intel Virtualization technology.
[Enabled]
Enables Intel Virtualization technology and allows a platform to run
multiple operating systems in independent partitions. The system
can function as multiple systems virtually.
[Disabled]
Disables this function.

Chapter 3

▶ Hardware Prefetcher [Enabled]
Enables or disables the hardware prefetcher (MLC Streamer prefetcher).
[Enabled]
Allows the hardware prefetcher to automatically pre-fetch data
and instructions into L2 cache from memory for tuning the CPU
performance.
[Disabled]
Disables the hardware prefetcher.
▶ Adjacent Cache Line Prefetch [Enabled]
Enables or disables the CPU hardware prefetcher (MLC Spatial prefetcher).
[Enabled]
Enables adjacent cache line prefetching for reducing the cache
latency time and tuning the performance to the specific application.
[Disabled]
Enables the requested cache line only.

BOIS Setup

3-24

▶ CPU AES Instructions [Enabled]
Enables or disables the CPU AES (Advanced Encryption Standard-New
Instructions) support. This item appears when a CPU supports this function.
[Enabled]
Enables Intel AES support.
[Disabled]
Disables Intel AES support.
▶ Intel Adaptive Thermal Monitor [Enabled]
Enables or disables the Intel adaptive thermal monitor function to protect the CPU
from overheating.
[Enabled]
Throttles down the CPU core clock speed when the CPU is over the
adaptive temperature.
[Disabled]
Disables this function.
▶ Intel C-State [Enabled]
C-state is a processor power management technology defined by ACPI.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled]
Detects the idle state of system and reduce CPU power consumption
accordingly.
[Disabled] Disable this function.
▶ C1E Support [Disabled]
Enables or disables the C1E function for power-saving in halt state. This item
appears when "Intel C-Statel" is enabled.
[Enabled]
Enables C1E function to reduce the CPU frequency and voltage for
power-saving in halt state.
[Disabled]
Disables this function.

▶ LakeTiny Feature [Disabled]
Enables or disables Intel Lake Tiny technology with iRST for SSD. This item
appears when "Intel C-State" is enabled.
[Enabled]
Enhance the dynamic IO load adjusted performance for accelerating
the SSD speed.
[Disabled]
Disables this feature.

3-25

BIOS Setup

Chapter 3

▶ Package C State limit [Auto]
This item allows you to select a CPU C-state mode for power-saving when system
is idle. This item appears when "Intel C-Statel" is enabled.
[Auto]
This setting will be configured automatically by BIOS.
[C0~C7s] The power-saving level from high to low is C7s, C7, C6, C3, C2,
then C0.
[No limit]
No c-state limit for CPU.

Note: The following items will appear when "Intel Turbo Boost " is enabled.
▶ Long Duration Power Limit (W) [Auto]
Sets the long duration TDP power limit for CPU in Turbo Boost mode.
▶ Long Duration Maintained (s) [Auto]
Sets the maintaining time for "Long duration power Limit(W)".
▶ Short Duration Power Limit (W) [Auto]
Sets the short duration TDP power limit for CPU in Turbo Boost mode.
▶ CPU Current limit (A) [Auto]
Sets maximum current limit of CPU package in Turbo Boost mode. When the
current is over the specified limit value, the CPU will automatically reduce the core
frequency for reducing the current.
▶ 1/2/3/4-Core Ratio Limit [Auto]
These items only appear when a CPU that support this function is installed. These
items allow you to set the CPU ratios for different number of active cores in turbo
boost mode. These items appear when the installed processor supports this
function.

Chapter 3
BOIS Setup

3-26

M-FLASH

Important

M-Flash funcion allows you to update BIOS from USB flash disk (FAT32/ NTFS format
only), or allows the system to boot from the BIOS file inside USB flash disk (FAT/
FAT32 format only).

▶ Select one file to boot
Selects a BIOS file in the USB flash disk (NTFS/ FAT 32 format) to boot the system.
This item will selectable when the “BIOS Boot function” is enabled.
▶ Save BIOS to storage
Saves the current BIOS file to the USB flash disk. The USB flash disk drive should be
in FAT32 format.
▶ Update BIOS
Selects a BIOS file in the USB flash disk (NTFS/ FAT 32 format) to update the BIOS.
▶ Select one file to update BIOS
Selects a BIOS file in the USB flash disk (NTFS/ FAT 32 format) to update the
BIOS. The system will reboot after updating.
▶ Select one file to update BIOS and ME
Selects a BIOS file, includes the ME management settings, in the USB flash disk
(NTFS/ FAT 32 format) to update the BIOS and ME. The system will reboot after
updating.

3-27

BIOS Setup

Chapter 3

▶ BIOS Boot Function [Disabled]
Enables or disables the system to boot form USB flash disk with BIOS file.
[Enabled]
Enables the system to boot from the BIOS within USB flash disk.
[Disabled]
Enables the system to boot from the BIOS within ROM on motherboard.
*This may cause system unstable, MSI recommend it only for power users.

OC PROFILE

▶ Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press to enter the submenu.
▶ Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Names the current overclocking profile.
▶ Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Saves the current overclocking profile.
▶ Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Loads the current overclocking profile.

Chapter 3

▶ Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Clears the current overclocking profile.
▶ OC Profile Save to USB
Saves OC profile to the USB flash disk drive. The USB flash disk should be FAT32
format only.
▶ OC Profile Load from USB
Loads OC profile from the USB flash disk drive. The USB flash disk should be FAT32
format only.

BOIS Setup

3-28

HARDWARE MONITOR
Temperature &
Speed
graphic display

Current
Temperature & Speed
information

Fan
control field

Voltage
display

▶ Current Temperature & Speed information
Shows the current CPU temperature, system temperature and fans' speeds.

▶ Fan control field
This motherboard provides a fan speed control feature call “Smart Fan Control”.
Smart Fan Control automatically controls fan speed depending on the current CPU/
system temperature and to keep it with a specific operating speed. When the current
CPU/ system temperature is over the maximum temperature, the CPU/ system fan
will run at the maximum speed. When the current CPU/ system temperature is under
the minimum temperature, the CPU/ system fan will run at the minimum speed. In this
field, you can set the CPU and system fans’ speeds and target temperatures.

3-29

BIOS Setup

Chapter 3

▶ Temperature & Speed graphic display
The red graph shows the minimum and maximum temperatures that be set on the
“Fan control field”. The yellow graph shows current CPU/ system temperature. The
green shows current CPU/ System fan speed.

Please follow the description below to set the temperatures and fan speeds.
a
b
c

d
e
f

■
■
■
■
■
■

a - Selects a fan you want to specify the speed.
b - Checks this item to activate the following items for changing default values.
c - Slides the Min and Max tabs to set the minimum and maximum
temperatures.
d - Slides the arrow symbol to set the minimum fan speed in percentage.
e - Slides the arrow symbol to set the maximum fan speed in percentage.
f - Click the "Default" button to restore the default values. Or click the
"Cancel" button to abandon all changes and restore to the previous values.

Important

The minimum values of temperature and speed can not be set larger then the
maximum values.
▶ Voltage display
Shows the current voltages of CPU, system and memory.

Chapter 3
BOIS Setup

3-30

Appendix A

Realtek Audio
The Realtek audio provides 10-channel DAC that simultaneously supports 7.1
sound playback and 2 channels of independent stereo sound output (multiple
streaming) through the Front-Out-Left and Front-Out-Right channels.

Software Configuration
Appendix A

After installing the audio driver (see Chapter 1 - Driver and Utilities), the “Realtek HD
Audio Manager” icon will appear at the notification area (lower right of the screen).
You may double click the icon and the GUI will pop up accordingly.

double click the icon

It is also available to enable the audio driver by clicking the Realtek HD Audio
Manager from the Control Panel.

Software panel overview
The following figure describes the function of the Realtek HD Audio Manager panel.
Application Enhancement

Device Selection

Volume Adjustment

Realtek Audio

Jack status panel

A-2

▶ Volume Adjustment
You can control the volume or balance the right/left side of the speakers that you
plugged in front or rear panel by adjust the bar.
▶ Application Enhancement
The array of options will provide you a complete guidance of anticipated sound effect
for both output and input device.
▶ Jack status panel
This panel depicts all render and capture devices currently connected with your
computer.

Auto popup dialog
When you plug into the device at the jack, a dialogue window will pop up asking you
which device is current connected.

As you know, each jack corresponds to its default setting, you can refer to the next
section “Hardware Default Setting”.

A-3

Realtek Audio

Appendix A

▶ Device Selection
Here you can select a audio output source to change the related options. The “check”
sign (in orange) indicates the devices as default.

Hardware Default Setting
The following diagrams are audio back panel default setting.

Appendix A

■

Backpanel audio jacks to 2-channel speakers diagram
Fro

■

Backpanel audio jacks to 4-channel speakers diagram
Fro

Rea

Realtek Audio

A-4

Backpanel audio jacks to 6-channel speakers diagram
Fro

Cen

■

ter

ubw

Rea
oof

Backpanel audio jacks to 8-channel speakers diagram
Fro

Cen

ter
S id

A-5

&S
eS

ubw

urro

Rea
oof

und

Realtek Audio

Appendix A

■

Appendix B

Intel RAID
This appendix will assist users in configuring and enabling RAID functionality
and accelerating system on platforms

Introduction
The motherboard comes with the Intel RAID controller that allows you to configure
SATA hard drives as RAID sets.
SATA hard drives deliver blistering transfer speeds up to 6 Gb/s. Serial ATA uses
long, thin cables, making it easier to connect your drive and improving the airflow
inside your PC. The most outstanding features are:
1. Supports 3 Gb/s or 6 Gb/s transfers with CRC error checking.
2. Supports Hot-plug-n-play feature.
3. Data handling optimizations including tagged command queuing, elevator seek
and packet chain command.

Appendix B

Intel® RAID controller offers RAID level 0 (Striping), RAID level 1 (Mirroring and
Duplexing), RAID level 5 (Block Interleaved Distributed Parity), RAID level 10 (A Stripe
of Mirrors) , Intel® Rapid Storage Technology.
RAID 0 breaks the data into blocks which are written to separate hard drives.
Spreading the hard drive I/O load across independent channels greatly improves I/O
performance.
RAID 1 provides data redundancy by mirroring data between the hard drives and
provides enhanced read performance.
RAID 5 Provides data striping at the byte level and also stripe error correction
information. This results in excellent performance and good fault tolerance. Level 5 is
one of the most popular implementations of RAID.
RAID 10 Not one of the original RAID levels, multiple RAID 1 mirrors are created, and
a RAID 0 stripe is created over these.
Intel® Rapid Storage Technology is the advanced ability for two RAID volumes to share
the combined space of two hard drives being used in unison.
Intel® Rapid Storage Technology utilizes RAID 1 functionality to copy data from a
designated Master drive to a designated Recovery drive. The size of the Master drive
must be less than or equal to the size of the Recovery drive. When a Recovery volume
is created, complete capacity of the Master drive will be used as the Master volume.
Only one Recovery Volume can exist on a system. There are 2 methods of updating
the data on the Master to the Recovery drive. They are Continuous Update Policy and
On Request Update Policy.

Important
The least number of hard drives for RAID 0, RAID 1, Recovery or Matrix mode is 2.
The least number of hard drives for RAID 10 mode is 4. And the least number of hard
drives for RAID 5 mode is 3.
All the information/ volumes/ pictures listed in your system might differ from the
illustrations in this appendix.

Intel RAID

B-2

Using Intel Rapid Storage Technology Option ROM

Creating, Deleting and Resetting RAID Volumes:
The Serial ATA RAID volume may be configured using the RAID Configuration utility
stored within the Intel RAID Option ROM. During the Power-On Self Test (POST), the
following message will appear for a few seconds.

Important
The “Device Model”, “Serial #” and “Size” in the following example might be different
from your system.
RAID Volumes
None defined.
Physical Disks:
Port Device Model
1
XXXXXXXXXXXXX
2
XXXXXXXXXXXXX

Serial #
XXXXXXXXXXXXX
XXXXXXXXXXXXX

Size
XXX.XGB
XXX.XGB

Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk

Press to enter Configuration Utility..

After the above message shows, press and keys simultaneously to enter
the Intel Rapid Storage Technology Option ROM.

Important
The following procedure is only available with a newly-built system or if you are
reinstalling your OS. It should not be used to migrate an existing system to RAID.

B-3

Intel RAID

Appendix B

The Intel Rapid Storage Technology Option ROM should be integrated with the
system BIOS on all motherboards with a supported Intel chipset. The Intel Rapid
Storage Technology Option ROM is the Intel RAID implementation and provides BIOS
and DOS disk services. Please use + keys to enter the “Intel® RAID for
Serial ATA” status screen, which should appear early in system boot-up, during the
POST (Power-On Self Test). Also, you need to enable the RAID function in BIOS to
create, delete and reset RAID volumes.

After pressing the and keys simultaneously, the following window will
appear:

[ [ MAIN
MAIN MENU ] ]
1.
2.
3.

4.
Recovery Volume Options
Create RAID Volume
5.
Acceleration Options
Delete RAID Volume
6.
Exit
Reset Disks to Non-RAID
[ DISK / VOLUME INFORMATION ]

RAID Volumes :
None defined.

Appendix B

Physical Devices :
Port Device Model
1
XXXX-XXXXXXXX
2
XXXX-XXXXXXXX

[ ↑↓] - Select

Serial #
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX

[ESC] - Exit

Size Type/Status (Vol ID)
XXX.XGB Non-RAID Disk
XXX.XGB Non-RAID Disk

[ENTER] - Select Menu

■ Create RAID Volume
1. Select option 1 “Create RAID Volume” and press key. The following
screen appears. Then in the Name field, specify a RAID Volume name and then
press the or key to go to the next field.
2. Use the arrow keys to select the RAID level best suited to your usage model in
RAID Level.
[ CREATE VOLUME MENU ]
Name :
RAID Level :
Disks :
Strip Size :
Capacity :
Sync :

Volume0
RAID1(Mirror)
Select Disks
N/A
XXX.X GB
N/A
Create Volume
[ HELP ]

RAID 1 : Mirrors data (redundancy) .

[ ↑↓] - Change

Intel RAID

[TAB] - Next

[ESC] - Previous Menu

B-4

[ENTER] - Select

3. In the Disk field, press key and use key to select the disks you
want to create for the RAID volume, then click key to finish selection. This
field will become available according to the selected RAID level.
4. Then select the strip size for the RAID array by using the “upper arrow” or “down
arrow” keys to scroll through the available values, and pressing the key
to select and advance to the next field. The available values range from 4KB to
128 KB in power of 2 increments. The strip size should be chosen based on the
planned drive usage. Here are some typical values:
RAID0 -128KB / RAID10 - 64KB / RAID5 - 64KB. This field will become available
according to the selected RAID level.

Appendix B

5. Then select the capacity of the volume in the Capacity field. The default value is
the maximum volume capacity of the selected disks.

[ CREATE VOLUME MENU ]
Name :
RAID Level :
Disks :
Strip Size :
Capacity :
Sync :

Volume0
RAID1(Mirror)
Select Disks
N/A
XXX.X GB
N/A
Create Volume
[ HELP ]

The default value indicates the maximum capacity using the selected
disks. Entering a lower capacity allows you to create a second
volume on these disks.

[ ↑↓] - Change

[TAB] - Next

[ESC] - Previous Menu

[ENTER] - Select

Important
Since you want to create two volumes, this default size (maximum) needs to be
reduced. Type in a new size for the first volume. As an example: if you want the
first volume to span the first half of the two disks, re-type the size to be half of what
is shown by default. The second volume, when created, will automatically span the
remainder of two hard drives.

B-5

Intel RAID

6. Go to the Create Volume field and press , the following screen appears for
you to confirm if you are sure to create the RAID volume. Press to continue.
[ CREATE VOLUME MENU ]
Name :
RAID Level :
Disks :
Strip Size :
Capacity :
Sync :

Volume0
RAID1(Mirror)
Select Disks
N/A
XXX.X GB
N/A
Create Volume
WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST.
HELP
[
Are you sure you want to create] this volume? (Y / N) :

Appendix B

Press ENTER to create the specified volume.

[ ↑↓] - Change

[TAB] - Next

[ESC] - Previous Menu

[ENTER] - Select

7. Then the following screen appears to indicate that the creation is finished.

[ [ MAIN
MAIN MENU ] ]
1.
2.
3.

4.
Recovery Volume Options
Create RAID Volume
5.
Acceleration Options
Delete RAID Volume
6.
Exit
Reset Disks to Non-RAID
[ DISK / VOLUME INFORMATION ]

RAID Volumes :
ID
Name
0
Volume0
Physical Devices :
Port Device Model
1
XXXX-XXXXXXXX
2
XXXX-XXXXXXXX

[ ↑↓] - Select

Intel RAID

Level
RAID1(Mirror)

Strip
N/A

Serial #
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX

[ESC] - Exit

B-6

Size Status
XXX.XGB Normal

Bootable
Yes

Size Type/Status (Vol ID)
XXX.XGB Member Disk(0)
XXX.XGB Member Disk(0)

[ENTER] - Select Menu

■ Delete RAID Volume
Here you can delete the RAID volume, but please be noted that all data on RAID
drives will be lost.

Important

Select option 2 Delete RAID Volume from the main menu screen and press
key to select a RAID volume for deletion. Then press key to
delete the selected RAID volume. The following screen appears.
[ DELETE VOLUME MENU ]
Name
Volume0

Level
RAID1(Mirror)

Drives
2

Capacity
XXX.XGB

Status
Normal

Bootable
Yes

[ DELETE VOLUME VERIFICATION ]
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
HELP “Volume0”?
]
Are you sure you want to[ delete
(Y / N) :

Deleting a volume will reset the disks to non-RAID.
WARNING : ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)

[ ↑↓] - Select

[ESC] - Previous Menu

[DEL] - Delete Volume

Press key to accept the volume deletion.

B-7

Intel RAID

Appendix B

If your system currently boots to RAID and you delete the RAID volume in the Intel
RAID Option ROM, your system will become un-bootable.

■ Reset Disks to Non-RAID
Select option 3 Reset Disks to Non-RAID and press to delete the RAID
volume and remove any RAID structures from the drives. The following screen
appears:
[ MAIN MENU

]

4.
Recovery Volume Options
Create RAID Volume
4. ] Recovery Volume Options
Delete RAID Volume [ RESET RAID DATA
5. remove
Exit its RAID structures
Resetting RAID disk will
VOLUME INFORMATION
and revert [ it DISK
to a / non-RAID
disk.
]

1.
2.

RAID VolumesWARNING
:
: Resetting a disk causes all data on the disk to be lost.
None defined.
(This does not apply to Recovery volumes)

Appendix B

PortDevices
Drive : Model
Serial #
Physical
1
XXXX-XXXXXXXX

Port Device
Model
Serial
# XXXXXXXXXXXXXX
2
XXXX-XXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXX
1
XXXX-XXXXXXXX
2
XXXX-XXXXXXXX
XXXXXXXXXXXXXX

Size Status
XXX.XGB
Member Disk
Size Type/Status
(Vol ID)
XXX.XGB
MemberDisk
Disk
XXX.XGB
Non-RAID
XXX.XGB Non-RAID Disk

Select the disks that should be reset.
[ ↑↓] - Previous/ Next
[ ↑↓] - Select

[SPACE] - Selects
[ESC] - Exit

[ENTER] - Selection Complete
[ENTER] - Select Menu

Use the key to select the disks and press key. A confirmation
sentence will appear below, and then press key to accept the selection.

Important
• You will lose all data on the RAID drives and any internal RAID structures when you
perform this operation.
• Possible reasons to “Reset Disks to Non-RAID” could include issues such as
incompatible RAID configurations or a failed volume or failed disk.

Intel RAID

B-8

■ Recovery Volume Options
Select option 4 Recovery Volume Options and press to change recovery
volume mode. The following screen appears:
[ RECOVERY VOLUME OPTIONS ]
1.
2.

Enable Only Recovery Disk
Enable Only Master Disk
[ HELP ]

[ ↑↓] - select

[ESC] - Previous Menu

Appendix B

Enable Only Recovery Disk - enables recovery disk if available and
disables master disk.
Enable Only Master Disk - enables master disk if available and
disables recovery disk.
Actions will result in change from Continuous Update mode to On-Request.

[ENTER] - Select

Recovery mode will change from Continuous Update to On-Request after you
enable “Only Recovery Disk” or “Only Master Disk”.

B-9

Intel RAID

Degraded RAID Array
A RAID 1, RAID 5 or RAID 10 volume is reported as degraded when one of its hard
drive members fails or is temporarily disconnected, and data mirroring is lost. As a
result, the system can only utilize the remaining functional hard drive member. To
re-establish data mirroring and restore data redundancy, refer to the procedure below
that corresponds to the current situation.
Missing Hard Drive Member
1. Make sure the system is powered off.
2. Reconnect the hard drive.
3. Reboot the system to Windows; the rebuild will occur automatically.

Appendix B

Failed Hard Drive Member
1. Make sure the system is powered off.
2. Replace the failed hard drive with a new one that is of equal or greater capacity.
3. Reboot the system to Intel RAID Option ROM by press and keys
simultaneously during the Power-On Self Test (POST).
RAID Volumes
ID
Name
0
Volume0

Level
RAID 1(Mirror)

Physical Disks:
Port Device Model
1
XXXXXXXXXXXXX
2
XXXXXXXXXXXXX

Strip
N/A

Size
XXX.XGB

Serial #
XXXXXXXXXXXXX
XXXXXXXXXXXXX

Status
Degraded

Size
XXX.XGB
XXX.XGB

Bootable
Yes

Type/Status(Vol ID)
Member Disk (0)
Member Disk (0)

Press to enter Configuration Utility..

4. Select the port of the destination disk for rebuilding, and then press ENTER.
[ MAIN MENU
1.
2.

]

4.
Recovery Volume Options
Create RAID Volume
[ DEGRADED VOLUME DETECTED ]
4.
Recovery Volume Options
Delete RAID Volume
“Degraded” volume and disk available
for rebuilding detected. Selecting
5.
Exit
a disk initiates a rebuild.
Rebuild
completes
in
the
operating
system.
[ DISK / VOLUME INFORMATION
]

RAID Volumes :
Select the port of the destination disk for rebuilding (ESC to exit):
None defined.
Port Drive Model
Serial #
Size
1
XXXX-XXXXXXXX
XXXXXXXXXXXXXX
XXX.XGB
Physical Devices :
Port Device Model
Serial #
Size Type/Status (Vol ID)
1
XXXX-XXXXXXXX
XXXXXXXXXXXXXX
XXX.XGB Non-RAID Disk
[ ↑↓] - Previous/ Next [ENTER] - Select [ESC] - Exit
2
XXXX-XXXXXXXX
XXXXXXXXXXXXXX
XXX.XGB Non-RAID Disk

[ ↑↓] - Select

Intel RAID

[ESC] - Exit

B-10

[ENTER] - Select Menu

5. Exit Intel RAID Option ROM, and then reboot to Windows system.
6. When prompted to rebuild the RAID volume, click ‘Yes’.

Appendix B

7. The Intel Rapid Storage Technology application will be launched. Right-click
the new hard drive and select ‘Rebuild to this Disk’. The ‘Rebuild Wizard’ will be
launched which will guide you through the process of rebuilding to the new hard
drive.

B-11

Intel RAID

System Acceleration (optional)
Intel® Rapid Storage Technology use a SSD as a cache. Which can store frequently
used data without having to use a slow virtual disk or depend on RAM. The SSD
cache with the advantages of high-speed read/write and non-volatile memory to
accelerate the system performance.

Important
Check your SSD manufacturer's website, upgrade firmware in order to support Intel®
Rapid Storage Technology.

Appendix B

Intel® Rapid Storage Technology can only work with RAID mode. Even though there is
only one hard drive, you must set the SATA Mode to RAID in BIOS. The OS must be
installed in the RAID ready disk in order to use the SSD caching.
Follow these steps to enable system acceleration. If Windows has been installed in
RAID mode, skip to the step 5.
1. Reboot and enter the BIOS steup.
2. Set the SATA Mode to RAID in BIOS.
3. Install Intel® RAID controller driver. Please refer to the section "Installing Driver".
4. Install Windows operating system.
5. Powered off.
6. Connect the SSD.
7. Reboot the system to Windows.
8. Insert the MSI DVD into the DVD-ROM drive.

Click here

9. Click the “STORAGE” on the Setup screen.

10. Click the "Intel RAID Driver" to install Intel® Rapid Storage Technology application.
Intel RAID

B-12

11. Run Intel® Rapid Storage Technology application.
12. Click "Enable acceleration" under Accelerate.

Click here

Appendix B

13. Select the acceleration options.

14. Click OK and reboot the system.
The page refreshes and reports the new acceleration configuration in the Acceleration
View.

Important
You can click “More help on this page” or "More help" of the Intel® Rapid Storage
Technology application to view more information.

B-13

Intel RAID

RST Synchronization (optional)
If you are using Maximized mode as the Acceleration mode, the data on the hard disk
is not always synchronized with the data in the SSD cache. In some situations, you
may want to manually sync the disks for avoiding data loss.
Follow these steps to sync manually.
1. Reboot system, during the Power-On Self Test (POST) press, press and
keys simultaneously to enter the Intel Rapid Storage Technology Option ROM.
2. Select option 5 “Acceleration Options” and press key. The following
screen appears.

Appendix B

[ ACCELERATION OPTIONS ]
Name
DISK PORT 0

Type
Non-RAID Disk

Capacity Mode
153.4GB Maximized

Status
No Sync

[ HELP ]
Press 's' to synchronize data from the cache device to
the Accelerated Disk/Volume.
Press 'r' to remove the Disk/Volume Acceleration.
WARNING: IT IS RECOMMENDED THAT YOU [ERFORM A SYNCHRONIZATION
BEFORE REMOVING ACCELERATION.
[ ↑↓] - Select

[ESC] - Previous Menu

3. Press to synchronize data.
[ SYNCHRONIZATION VERIFICATION ]
5. MAY
Exit TAKE SEVERAL MINUTES.
SYNCHRONIZING THE DATA
/ VOLUME INFORMATION
[ DISK
]
DO
NOT INTERRUPT
THE PROCESS!
Are you sure you want to synchronize data to
"DISK PORT 0"? (Y/N):

4. When prompted, press to confirm.
[ ACCELERATION OPTIONS ]
Name
DISK PORT 0

Type
Non-RAID Disk

Capacity Mode
153.4GB Maximized

Status
In Sync

5. Once synchronization is complete, the status will change to In Sync.

Intel RAID

B-14

Appendix C

Intel SBA
Intel® Small Business Advantage (Intel® SBA) provides an out-of-the-box
hardware-based security and productivity suite designed for the small
business user. Intel® SBA includes a customizable user interface and several
bundled Intel applications.

Prerequisites

Appendix C

■ Supported Operating Systems
Intel SBA supports following OS:
■ Windows 7 Professional 64-bit and 32-bit
■ Windows 7 Enterprise 64-bit
■ Windows 8 PRO 64-bit and 32-bit
■ Required User Permissions
You must run the installer and the customization wizard with a user that has local
administrator permissions on the computer.
■ Windows Update Settings
In certain conditions, the Windows Update task in the PC Health Center application is
disabled and cannot be enabled. This can occur if Intel SBA is installed on a computer
where Windows Update was disabled during installation of the Windows operating
system. The Windows Update task is shown in the GUI but is grayed out (disabled).
Even if the end user enables Windows Update in the operating system, the PC Health
Center task cannot be enabled. This means that the end user cannot use PC Health
Center to manage Windows Update.
To prevent this, make sure that you do NOT select the Never check for updates option
when installing the Windows operating system.
■ Windows Task Scheduler
Some PC Health Center tasks are applications that can also be used directly from
the operating system and scheduled via the Windows Task Scheduler. When a task
is set via PC Health Center, an alarm clock is set that will wake up the computer if it
is turned off. Defining a scheduled time for an application/task outside of PC Health
Center does not set an alarm clock. This means that the computer will not be woken
up to do the task.
For this reason, it is NOT recommended to define schedules for these applications:
■ Windows Updates
■ Windows Backup and Restore
■ Disk defragmentation
Instead, let the end user set the schedule for all these tasks via PC Health Center.

Intel SBA

C-2

Installing Intel SBA
This procedure describes how to install Intel SBA.
■ To install Intel SBA:
1. Logon to the computer with a user that has administrator privileges.
2. Insert the application DVD into the DVD-ROM drive. The setup screen will
automatically appear.
3. Click OTHERS tab.
4. Select Intel SBA to start installing.
5. Follow the on-screen instructions to install.

Software Configuration
After installation of the Intel SBA software is complete, the Intel SBA service is started.
The desktop, system tray, and programs menu include shortcuts to the GUI of Intel
SBA.

Software panel overview

Appendix C

The following figure describes the function of the Intel SBA control panel.

Tabs Selection

Applications Selection

C-3

Applications Description

Intel SBA

Password settings
By default, the system is in an unconfigured state. Before the hardware capabilities
can be used by Intel SBA software, the system must be configured. This is done in the
Settings > Password Settings tab in the main menu of the GUI.

Appendix C
Fill out the form to create the new password and click “Save”. You will be asked to
enter the password when you want to start using Intel SBA.

Important
• Upon completion of the password settings, please keep your password secure.
• Please remember your answers to the security questions.

Help Button
There is a help button
on the top right. If you need to know detailed introductions.
Just click on the help button, to get the information.

Intel SBA

C-4

Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1.1-111 Instance ID : uuid:2182d03a-663c-4b14-b46d-319881b3db90 Document ID : adobe:docid:indd:9cd3bbcc-96b9-11e2-881a-d5aa6e6407a7 Rendition Class : proof:pdf Derived From Instance ID : 9cd3bbcb-96b9-11e2-881a-d5aa6e6407a7 Derived From Document ID : adobe:docid:indd:50d6fb44-8ae0-11e2-ba45-e29e7a23280e Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:58a7f74c-cd9b-45e1-84fd-b85b31b454be, uuid:f214f501-aa18-4818-9f6e-50919bbe5281, xmp.iid:4C675901E7C4E111A54DC4833359FBED, uuid:f214f501-aa18-4818-9f6e-50919bbe5281, uuid:333bde19-e22a-4c76-87a2-3de9c4669814, uuid:a99897f5-92b1-460f-91fc-cd1600e3ddd1, uuid:a4e8660a-c75b-4a77-b008-aafe2064507b, uuid:914ba0d7-848d-478d-8de5-86e42f511ec2, uuid:fb75caa5-af74-419e-bcfb-ca2838b1d8ee, uuid:9cc10d0f-fa6c-4805-bf65-31b965faf327, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:e1a36bec-62a0-44f5-94ed-7a250a58d4dd, uuid:4f14414a-843c-4512-a3e7-c2d1f04f3b3c, uuid:a05435dc-2228-4bc9-8b9c-d9728af60b52, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:d8514012-515d-4295-a809-009f1417923b, uuid:f5629ca7-a146-4cdf-a198-f3b15ff38120, uuid:2b174265-ab40-421d-ba82-abbbf4252af0, uuid:65dea89f-6c4a-4199-9567-2112edc9d66d, uuid:eaa84639-8c99-488b-af0b-102946699467, uuid:aa0db7da-ecbb-40f0-8f66-9cada1bca33a, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:023fc2da-50ca-48d0-a250-087add71a2e5, uuid:020b320d-a9e4-4a3b-97ad-570ebaac4e25, uuid:a99a56fe-a3e2-4c2c-80fa-bf0d123a09ba, uuid:d8514012-515d-4295-a809-009f1417923b, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:d8514012-515d-4295-a809-009f1417923b, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:d8514012-515d-4295-a809-009f1417923b, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:d8514012-515d-4295-a809-009f1417923b, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:d8514012-515d-4295-a809-009f1417923b, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:4f14414a-843c-4512-a3e7-c2d1f04f3b3c, uuid:a05435dc-2228-4bc9-8b9c-d9728af60b52, uuid:f5629ca7-a146-4cdf-a198-f3b15ff38120, uuid:2b174265-ab40-421d-ba82-abbbf4252af0, uuid:65dea89f-6c4a-4199-9567-2112edc9d66d, uuid:eaa84639-8c99-488b-af0b-102946699467, uuid:d8514012-515d-4295-a809-009f1417923b, uuid:023fc2da-50ca-48d0-a250-087add71a2e5, uuid:020b320d-a9e4-4a3b-97ad-570ebaac4e25, uuid:a99a56fe-a3e2-4c2c-80fa-bf0d123a09ba, uuid:d8514012-515d-4295-a809-009f1417923b, uuid:d8514012-515d-4295-a809-009f1417923b, uuid:d8514012-515d-4295-a809-009f1417923b, uuid:d8514012-515d-4295-a809-009f1417923b, uuid:d8514012-515d-4295-a809-009f1417923b, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:8f5c5849-56b5-499f-8eb3-c4e869fb8c26, uuid:e3716b51-17d7-46c6-9370-6f90ccf67770, uuid:3d682d3a-b448-4f3c-8581-b450a81c7c5c, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:333bde19-e22a-4c76-87a2-3de9c4669814, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423, uuid:9fb19e3c-c51f-41e7-858f-2813cbf0a423 Manifest Reference Document ID : uuid:5B275E43E5CCDD119F0ED9C29D6E5017, uuid:2535AB770FBEDE11B089B3619C8772C0, xmp.did:4C675901E7C4E111A54DC4833359FBED, uuid:2535AB770FBEDE11B089B3619C8772C0, uuid:4ADF5D1795D0DD11868AEC5BFA43170E, uuid:a8c49613-6b2b-4fd0-b43e-f2d30d6f82c2, uuid:bca3da8d-3ca8-4826-b648-f54d95e12fab, uuid:82c1655c-8f1e-4341-abc1-0aeb47a74a49, uuid:50b57111-20b7-43c1-bbfd-37b1a067ee4c, uuid:1cf075a2-0b79-4f1c-b5eb-8eb11247b2f0, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:9700f99f-affb-4349-a92e-4cfce0a268c9, uuid:3f55b211-f790-4162-bed0-052dfca359a9, uuid:afb2a0f6-77ca-4056-9b2c-a50f45b3b09f, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:496b3f6e-3d7e-46fb-969d-7e3061798dcf, uuid:145acae2-cec4-44f7-bd45-e34f6a430077, uuid:21a852d1-7cae-4250-a20b-6eaab1413037, uuid:fa176846-a5f4-479b-a0e6-16c619690117, uuid:9bd4070e-45da-470f-a33b-4afae6bab005, uuid:d21d4bec-bbad-4ad4-8d0c-4e2928ccb628, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:303e844a-85f0-45b1-ba52-15f99e1e1cd7, uuid:9dde5861-05bd-4074-8b43-c3aa69e9d4f9, uuid:ca202b3f-2153-4375-8a98-3e004b514b8a, uuid:496b3f6e-3d7e-46fb-969d-7e3061798dcf, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:496b3f6e-3d7e-46fb-969d-7e3061798dcf, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:496b3f6e-3d7e-46fb-969d-7e3061798dcf, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:496b3f6e-3d7e-46fb-969d-7e3061798dcf, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:496b3f6e-3d7e-46fb-969d-7e3061798dcf, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:3f55b211-f790-4162-bed0-052dfca359a9, uuid:afb2a0f6-77ca-4056-9b2c-a50f45b3b09f, uuid:145acae2-cec4-44f7-bd45-e34f6a430077, uuid:21a852d1-7cae-4250-a20b-6eaab1413037, uuid:fa176846-a5f4-479b-a0e6-16c619690117, uuid:9bd4070e-45da-470f-a33b-4afae6bab005, uuid:496b3f6e-3d7e-46fb-969d-7e3061798dcf, uuid:303e844a-85f0-45b1-ba52-15f99e1e1cd7, uuid:9dde5861-05bd-4074-8b43-c3aa69e9d4f9, uuid:ca202b3f-2153-4375-8a98-3e004b514b8a, uuid:496b3f6e-3d7e-46fb-969d-7e3061798dcf, uuid:496b3f6e-3d7e-46fb-969d-7e3061798dcf, uuid:496b3f6e-3d7e-46fb-969d-7e3061798dcf, uuid:496b3f6e-3d7e-46fb-969d-7e3061798dcf, uuid:496b3f6e-3d7e-46fb-969d-7e3061798dcf, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:96395012-3320-4d29-b2a8-6efc4af3a171, uuid:bfda2104-0718-4063-8aae-2cd1c2ac75c5, uuid:1ad8cbde-8d0c-4c77-81c3-6cb414b64d95, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:4ADF5D1795D0DD11868AEC5BFA43170E, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa, uuid:ee416845-3761-405e-ae49-2342ce77aafa Create Date : 2013:03:28 10:08:18+08:00 Modify Date : 2013:03:28 10:08:42+08:00 Metadata Date : 2013:03:28 10:08:42+08:00 Creator Tool : Adobe InDesign CS2 (4.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 3647 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 112 Creator : Adobe InDesign CS2 (4.0)
EXIF Metadata provided by EXIF.tools

Msi Z87 G43 Owner S Manual

Msi-H87-G43-Owner-S-Manual msi-h87-g43-owner-s-manual

Navigation menu

Versions of this User Manual:

Views

Navigation