Murata Electronics North America 2410M Modular 2.4 GHz Transceiver User Manual 01 0057

Download:
Mirror Download [FCC.gov]
Document ID	141342
Application ID	Pe+E0Cla08XSN6CAwOBooQ==
Document Description	Updated Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	0.74kB (9203 bits)
Date Submitted	2001-03-23 00:00:00
Date Available	2001-03-29 00:00:00
Creation Date	2001-03-23 09:25:30
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	01-0057.PDF
Document Creator	Microsoft Word
Document Author:	Workstation

FCC ID: HSW-2410M
SECTION 4
USER'S MANUAL
FCC ID: HSW-2410M
The following statement will be placed in the front of the users manual:
Notice to users/installers using the 24 dBi parabolic dish antenna in conjunction
with the WIT2410 module. FCC rules limit the use of this antenna, when connected to the
WIT2410 module, to point-to-point applications only. It is the responsibility of the installer
to ensure that the system is prohibited from being used in point-to-multipoint applications,
omnidirectional applications, and applications where there are multiple co-located
intentional radiators transmitting the same information. Any other mode of operation using
this antenna is forbidden.
In order to meet FCC’s MPE requirements, Cirronet Corporation will add the following
statements to the users manual
Information to user/installer regarding FCC’s Maximum Permissible Exposure (MPE)
limits.
Notice to WIT2410 users/installers using the following fixed antennas:
Andrews 24dBi parabolic dish,
Andrews 18dBi parabolic dish,
Mobile Mark 9dBi Corner Reflector,
Mobile Mark 14dBi Corner Reflector,
Cushcraft 15dBi Yagi
The field strength radiated by any one of these antennas, when connected to a
transmitting WIT2410 module, may exceed FCC mandated RF exposure limits. FCC
rules require professional installation of these antennas in such a way that the general
public will not be closer than 2 m from the radiating aperture of any of these antennas.
End users of these systems must also be informed that RF exposure limits may be
exceeded if personnel come closer than 2 m to the apertures of any of these antennas.
Notice to WIT2410 users/installers using the following mobile antennas:
Mobile Mark 12dBi omnidirectional,
Mobile Mark 9dBi omnidirectional,
Cirronet 6dBi patch,
Ace 2dBi dipole,
Mobile Mark 2dBi Stub,
MaxRad 5dBi whip
The field strength radiated by any one of these antennas, when connected to a
transmitting WIT2410 module, may exceed FCC mandated RF exposure limits. FCC
rules require professional installation of these antennas in such a way that the general
public will not be closer than 20 cm from the radiating aperture of any of these
antennas. End users of these systems must also be informed that RF exposure limits
may be exceeded if personnel come closer than 20 cm to the apertures of any of these
antennas.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 2
Creator                         : Microsoft Word
Create Date                     : 2001:03:23 09:25:30
Title                           : 01-0057.PDF
Author                          : Workstation
Producer                        : Acrobat PDFWriter 4.0 for Windows

EXIF Metadata provided by EXIF.tools