Murata LB1JS955 Communication Module User Manual Users manual
Murata Manufacturing Co., Ltd. Communication Module Users manual
Murata >
Contents
- 1. Users manual
- 2. 05 User Manual_FCC
Users manual
1
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 13 December 2016
Type1JS User Manual
FCC ID of this product is as follows.
FCC ID: VPYLB1JS955
Contents
1.Notice
2
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 13 December 2016
1. Notice
Contains Transmitter Module FCC ID:VPYLB1JS955
Contains FCC ID: VPYLB1JS955
or
Please describe the following warning on the final product which contains this module.
※When the product is small, as for these words mentioned above, the posting to a manual is possible.
●Please describe the following warning to the manual.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
For OEM integration only – device cannot be sold to general public.
Therefore we will ask OEM to include the following statements required
by FCC on the product and in the Installation manual Notice.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
3
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 13 December 2016
1. Notice
Note)
Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm.
Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm.
●RF Exposure Compliance
Please describe the following warning on the final product which contains this module.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed
to comply without testing of specific absorption rate(SAR).