Murata LB1KA Communication Module User Manual LBWA1ZZ1CA Installation Manual
Murata Manufacturing Co., Ltd. Communication Module LBWA1ZZ1CA Installation Manual
Murata >
(Short-Term Confidential) User Manual
1
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 16 November 2016
Type1KA User Manual
FCC ID and IC No. of this product is as follows.
FCC ID : VPYLB1KA
IC No. : 772C-LB1KA
Contents
1.Notice
2
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 16 November 2016
1. Notice
or
※When the product is small, as for these words mentioned above, the posting to a manual is possible.
Contains Transmitter Module FCC ID:VPYLB1KA Contains FCC ID: VPYLB1KA
This device complies with Part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
For OEM integration only – device cannot be sold to general public.
Therefore we will ask OEM to include the following statements required
by FCC/IC on the product and in the Installation manual Notice.
Please describe the following warning on the final product which contains this module.
Contains IC: 772C-LB1KA
3
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 16 November 2016
1. Notice
Note)
Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm.
Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm.
●When installing it in a portable equipment.
FCC：Class II permissive change application and SAR test are necessary.
IC： Class II permissive change application and SAR test are necessary.
Please contact Murata.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non
contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition
aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement doit être installé et utilisé en gardant une
distance de 20 cm ou plus entre le radiateur et le corps humain.
●When installing it in a mobile equipment.
Please describe the following warning to the manual.
●Please describe the following warning to the manual.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.