Murata LXRF032 UHF RFID Reader/Writer Device User Manual 05

Murata Manufacturing Co., Ltd. UHF RFID Reader/Writer Device 05

05 User Manual

User Manual Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification (installation procedure). The following information must be indicated on the host device of this module; [for FCC] Contains Transmitter Module FCC ID: VPYLXRF032 or Contains FCC ID: VPYLXRF032 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. *If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual. [for IC] Contains IC: 772C-LXRF032
The following statements must be described on the user manual of the host device of this module; [for FCC] FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. [for IC] This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.
The following statement is for host manufacturer, therefore isn’t described on the user manual of the host device. This radio transmitter 772C-LXRF032 has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Antenna type: Circular polarized antenna Gain: -2.6 dBi (without cable) Antenna type: Circular polarized antenna Gain: -2.9 dBi (with cable) Antenna type: Near field Loop Antenna Gain: -18.0 dBi (without cable) Antenna type: Near field Loop Antenna Gain: -18.3 dBi (with cable) Antenna type: Cable Antenna (1m) Gain: -4.7 dBi Antenna type: Cable Antenna (2m) Gain:-4.7 dBi Le présent émetteur radio 772C-LXRF032 a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci‑dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Type d’antenne: Circular polarized antenna Gain: -2.6 dBi (sans câble) Type d’antenne: Circular polarized antenna Gain: -2.9 dBi (avec câble) Type d’antenne: Near field Loop Antenna Gain: -18.0 dBi (sans câble) Type d’antenne: Near field Loop Antenna Gain: -18.3 dBi (avec câble) Type d’antenne: Cable Antenna (1m) Gain: -4.7 dBi Type d’antenne: Cable Antenna (2m) Gain: -4.7 dBi

Navigation menu