Murphy Diagnostic Display Pv10 Users Manual 0810305 Bulletin

PV10 to the manual 7c810e6b-48ad-4bf0-bbc0-7f437023ca9e

: Murphy Murphy-Diagnostic-Display-Pv10-Users-Manual-396860 murphy-diagnostic-display-pv10-users-manual-396860 murphy pdf

Open the PDF directly: View PDF .
Page Count: 2

0810305

10-21-08

Section 78

PowerView™ - Model PV10 – Diagnostic Display

Features

• Display supports electronically controlled engines and

equipment applications that use SAE J1939 Controller Area

Networks.

• Displays Active and Stored diagnostic trouble codes for

diagnosing equipment malfunctions.

• Displays Engine Hours, SPN, FMI, and OC information on a

graphic display.

• Provides enhanced visual alarm indication using Ultra-bright

ALARM or SHUTDOWN LEDs (amber and red).

• Simple installation and connections to the system bus.

• Rugged design for demanding applications includes backlit

display and is sunlight viewable.

Product Description

The PV10 Diagnostic display is a CAN device that receives data from a

controller or ECU and then displays Active and Stored Fault messages and

Engine Hours.

The default mode provides hourmeter data from the ECU for cumulative

engine hours.

The PV10 is equipped with two buttons to quickly select between Active or

Stored Faults, a graphic display, two LED to indicate the Active fault's Alarm

or Shutdown status in a sealed enclosure that matches the PowerView line

of gages.

Fault Messages

Fault messages are formatted to display SPN (Suspect Parameter Number), FMI (Failure Mode Indicator) and OC

(Occurrence Count) codes that conform to the SAEJ1939 protocol.

Bezel Styles

AB

A-20 Style A

A-20 Style BB

Low Profile SAE Style DB

Low Curved Style

Warranty

- A limited warranty on materials and workmanship is given with this FW Murphy product. A copy of the warranty

may be viewed or printed by going to www.fwmurphy.com/support/warranty.htm

In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.

MURPHY, the Murphy logo, MurphyLink

™

and PowerView

™

are registered and/or common law trademarks of Murphy Industries, Inc. This document,

including textual matter and illustrations, is copyright protected by Murphy Industries, Inc., with all rights reserved. (c) 2008 Murphy Industries, Inc.

Product Dimensions

Specifications

Operating Voltage

 6.0 VDC minimum to 36 VDC maximum

Power Supply Operating Current

 460mA max @ 12VDC

 810mA max @ 24VDC

Reversed Polarity: Withstands reversed battery

terminal polarity.

Environmental

 Operating Temperature: -40°C to 70°C

(-40°F to 158°F)

 Storage Temperature: -55°C to 85°C

(-67°F to 185°F)

 Sealing: IP68

CAN Bus: SAE J1939 compliant

Connectors

 4-pin AMP ”Mini-universal Mate-N-Lok connector”

 AMP Plug: P/N 172338-1

 AMP Socket: P/N 171639-1 (4 each, assumes 18

gauge wire. See AMP Plug specification to match

socket and wire size.)

Maximum Panel Thickness: 3/8 inch (9.6 mm)

Shipping Weights (all models): 0.2 lb. (0.1 kg.)

Shipping Dimensions (all models): 3-7/8 x 2-3/4 x 2-3/4

in. (98.4 x 69.85 x 69.85 mm)

How to Order

Accessories

Wiring Harness, PVW-PDA-12 PowerView 10 CAN and Power (P/N 78-00-0613)

Wiring Harness, PA-30 PowerView 10 Loose Wiring (P/N 78-00-0614)

Terminating Resistor, PVMJR (PN 78-00-0480)