Music Tribe Commercial MY Sdn Bhd DW20BR Wireless Systems User Manual 15 DW 20BR UserMan

Download:
Mirror Download [FCC.gov]
Document ID	3634285
Application ID	YFRYx+yhEKiRqohrmOM5Xw==
Document Description	15_DW 20BR UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	38.11kB (476369 bits)
Date Submitted	2017-11-09 00:00:00
Date Available	2017-11-10 00:00:00
Creation Date	2017-11-02 14:12:13
Producing Software	Acrobat Distiller 9.0.0 (Macintosh)
Document Lastmod	2017-11-02 14:12:13
Document Title	FEEL Prod Grap PH_Approval_P0C9S QSG EN A4_2017-11-02_Rev.3.indd
Document Creator	Adobe InDesign CS5 (7.0)
Document Author:	john.elona

AIR LINK DW 20BR
Controls
(1)
(2)
(3)
(4)
(1)
PAIR button – enables the unit to become available for pairing by pressing and
holding the button for 3 seconds. The LED ring will indicate the current status.
See the Getting Started section for details.
3. Activate Bluetooth connectivity on your Bluetooth device. The DW 20BR will
automatically try pair with the most recently connected device, in which case
you can start playing audio right away.
(2)
LEVEL knob – adjusts the volume of the signal sent to the output jacks.
(3)
DC INPUT – accepts the included power adapter.
4. To connect a new device, press and hold the PAIR button for 3 seconds.
The LED ring will flash quickly to indicate that it is ready to pair.
(4)
OUTPUTS – connect to an amp, powered speakers, or mixer via balanced XLR or
unbalanced ¼" TS cables.
5. Select the DW 20BR from the list of available items in the Bluetooth settings
menu of your Bluetooth device.
Note - disable cellular reception when streaming audio from a cell phone.
Getting Started
6. Start playing audio from your Bluetooth device. Adjust the volume on the
Bluetooth device, then turn up the LEVEL knob so that the speaker or mixer
receives a strong signal.
1. Connect the DW 20BR to a mixer or speaker system with either XLR
or ¼" cables. Keep the volume on the speaker or mixer channel turned all
the way down to avoid popping noises.
7. Turn up the volume on your speaker, mixer, amps, etc. until you reach the
desired listening level.
2. Connect the power adapter to the DW 20BR and to a power outlet. The unit
will turn on automatically.
Note - If your Bluetooth audio device is compatible, Play/Pause can be toggled
with a short press of the PAIR button on the DW 20BR while the bluetooth
stream is active.
Specifications
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
Outputs
Connectors
Balanced XLR, unbalanced ¼"
Impedance
240 Ω
Max. output level
4 dBu @ 1 kHz
KLARK TEKNIK
AIR LINK DW 20BR
Bluetooth
Frequency range
2402 - 2480 MHz
Channel number
79
Bluetooth version
4.2
Receiver range
Up to 30 m (100 ft)
Output power
Class 2, <10 dBm
Supported codec
SBC, aptX
Supported profiles
AVRCP 1.4, A2DP 1.2
Responsible Party Name:
MUSIC Group Research
UK Limited
Address:
Klark Industrial Park,
Walter Nash Road,
Kidderminster. Worcestershire.
DY11 7HJ. England.
Phone Number:
+44 1562 741515
System
AIR LINK DW 20BR
Frequency response
20 Hz to 20 kHz (+0/-2 dB)
THD + N (distortion)
0.1% @ 1 kHz
complies with the FCC rules as mentioned in the following paragraph:
Signal-to-noise ratio
>90 dB
Power adaptor
12 V DC, 400 mA, center positive
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Physical
Dimensions (H x W x D)
Without bumpers or antenna
54 x 105 x 105 mm (2.1 x 4.1 x 4.1")
With bumpers, without antenna
62 x 116 x 112 mm (2.4 x 4.6 x 4.4")
With bumpers, upright antenna
210 x 116 x 125 mm (8.3 x 4.6 x 4.9")
Weight incl. bumpers and antenna
0.6 kg (1.3 lbs)
Note: The ¼" output level is 6 dB lower than the XLR outputs
Caution!
The MUSIC Group is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user
authority to operate the equipment.
FCC RF Radiation Exposure Statement:
(1) This Transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
(2) This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
Important information:
Changes or modifications to the equipment not expressly approved by MUSIC Group can
void the user’s authority to use the equipment.
LEGAL DISCLAIMER
MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein.
Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, COOLAUDIO and EUROCOM are trademarks or registered trademarks of MUSIC Group IP Ltd.
© MUSIC Group IP Ltd. 2017 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding MUSIC Group’s Limited Warranty, please see complete details online at music-group.com/warranty.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-21:37:19
Trapped                         : False
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Producer                        : Acrobat Distiller 9.0.0 (Macintosh)
Create Date                     : 2017:11:02 14:12:13+08:00
Modify Date                     : 2017:11:02 14:12:13+08:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Creator                         : john.elona
Title                           : FEEL Prod Grap PH_Approval_P0C9S QSG EN A4_2017-11-02_Rev.3.indd
Author                          : john.elona

EXIF Metadata provided by EXIF.tools