Music Tribe Commercial MY Sdn Bhd PPA500BT Portable PA System User Manual Manual

MUSIC Group Services PH Corp Portable PA System Manual

Contents

Manual

Terminals marked with this symbol carry electrical current of sufficient magnitude toconstitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS ortwist-locking plugs pre-installed. All other installation or modification should be performed onlyby qualified personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerousvoltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock This symbol, wherever it appears, alerts you to important operating and maintenanceinstructions in the accompanying literature. Please read the manual. Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. Theapparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids,such as vases, shall be placed on the apparatus.CautionThese service instructions are for use by qualified service personnel only. To reduce the risk ofelectric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings.
4 Follow all instructions. 5 Do not use this apparatus near water.6 Clean only with dry cloth.7Do not block any ventilation openings. Install in accordance with the manufacturersinstructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a thirdgrounding prong. The wide blade or the third prong are provided for your safety. If the providedplug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Use only attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by themanufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has beenspilled or objects have fallen into the apparatus, the apparatus has been exposed to rain ormoisture, does not operate normally, or has been dropped. 15 The apparatus shall be connected to a MAINS socket outlet with a protective earthingconnection. 16 Where the MAINS plug or an appliance coupler is used as the disconnect device, thedisconnect device shall remain readily operable. LEGAL DISCLAIMER TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGEWITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, AND TURBOSOUND ARE PART OF THE MUSIC GROUP(MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS
WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR INPART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUPPRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS ORIMPLIEDUNDERTAKING OR REPRESENTATION. THIS MANUALIS COPYRIGHTED. NOPART OF THIS MANUAL MAYBE REPRODUCED OR TRANSMITTED IN ANY FORMORBY ANY MEANS, ELECTRONIC OR MECHANICAL,INCLUDING PHOTOCOPYING AND RECORDING OF ANYKIND, FOR ANY PURPOSE WITHOUT THE EXPRESSWRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED. © 2013MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146,Road Town, Tortola, British Virgin Islands LIMITED WARRANTYFor the applicable warranty terms and conditions and additional information regarding MUSIC Groups Limited Warranty, please see complete details online at www.music-group.com/warranty.
EUROPORT PPA2000BT/PPA500BT Set-upStep 1: Hook-Up Debate Centre de débat Podiumsdiskussion
Step 2: Set-up1,Release the top latch beneath the carrying handle2,Release the side latches by pressing and then lifting them. 3,Remove the speakers and place them in appropriate locations.
4,Stand the mixer upright.(Make sure the include speaker cables can reach bothspeakers)
Step 3: Controls.FX knob determines how much of each channel’s signal goes to the DIGITALEFFECTS PROCESSOR.EQ KNOBS adjust the high and lowfrequencies for each channel.
PAN knob positions each channel in thestereo field.LEVEL knob adjusts thevolume of the individualchannel in the overall mix. CLIP LED lights when theinput signals overloads thechannel. PROGRAM[PUSH] knob controls the effects settings. Rotate this knobto scroll through the effect patches, and push to select a patch.MULTI-FX PROCESSOR unit adds a selected sound effect to any channels which have theirEFFECTS knob turned up.Effects include reverb, chorus,delay, and pitch shifter.FX[LEVEL] knob controls the amount of effects added to themain mix.
GRAPHIC EQadjusts specific frequencies in the sound spectrum.EQ buttonactivates theGRAPHIC EQ.FBQ button activates the FBQ detection system. The EQ IN button must also beactivated for this feature to work.MAIN LEVEL CONTROLadjusts the overall volume ofthe main mix. The MODEswitch selects stereo or mono operation.LINE IN jack connects, CD players, sub-mixers, or otherline-level source using cables with ¼"plugs. These jacksaccept bothbalanced and PAD function reduces thechannel input signal by 20dB.Engage this button if the CLIPLED lights up on a channel.STEREO CHANNELS accept and rightsends from a single sound source usingeither RCA cables or14’’ TS plugs.
AUX IN inputs route stereo signals directly into the mainmix through either asginle1/8’’TRSstereo plug or leftand right1/4’’plugsBLUETOOTH PATRINGbutton and indicator connectyour Bluetooth device.PHANTOM button sends 48V ofphantom power topower condensermicrophones.MIC INPUT jacks acceptdynamic(handheld)or condenser microphonesusing XLR cables.DIGITAL WEIRELESS USB input accepts the optional BEHRINGER wireless microphone receiver. The LEDsindicate wireless microphonesignal input, connecting the wireless microphone systemdisables the MIC 1 and MIC 2FXFOOTSW jack connectsan optionalfootswitchusing a 14’’TRS plugSUB OUTjack sends thelow frequencies ofthe main mono signal to an activesubwoofer ot
STEREO AUX INinputs route stereosignals directly into themain mix through either a signal’s 1/8’’ TRSstereo plug or left andright 1/4’’plugs.RECORDING OUT jackssend the main mix signal out to an external recording device or another mixer.SPEAKER OUTPUTS connect to thespeakers using speaker cables with 1/4;;plugs.DONOT USE INTRUMENT CABLES AND ONLY USE THE INCLUDED SPEAKERS.
Step 4: Getting startedPOWER switch turnsthe power to the uniton and off .POWER SOURCE accepts the included IEC power cable into this jack.
1,Connect the included speaker cables to the speakers and to the rear SPEAKER OUTPUTS on the mixer.2, Make all the appropriate audio connections to the mixer. Power down all externaldevices.3, Set all the channel controls as shown (TREBLE, BASS, and BAL centered; EFFECTS and LEVEL down/off). 4,Center the GRAPHIC EQ faders. 5, Set the MAIN LEVEL CONTROL knobs all the way down.
6,Power up all external devices. 7, Power up the PPA2000BT/PPA500BT by pressing the POWER button.8,If you are using BEHRINGER wireless microphones, plug the wireless dongle into theDIGITAL WIRELESS USB input, The DIGITAL WIRELESS LEDs will light up when the wireless microphones become active. 9, Slowly turn the MAIN LEVEL CONTROL knobs up 1/3 of the way.10, Adjust the relative levels of microphones
11, If a channel’s CLIP LED lights, press the PAD button. If the PAD button is alreadyengaged, turn the LEVEL knob down. Always use the pad button with line level inputs.12, Adjust the left-right position of a channel in the stereo field by turning thechannel’s PAN knob.
13, Make final volume adjustments using the MAIN LEVEL CONTROL knobs.
Step 5: Adding Effects1,Set the FX [LEVEL] knob on the DIGITAL EFFECTS PROCESSOR to approximately a75% setting.2, Scroll through the available effects by turning the PROGRAM [PUSH] knob. The number in the display will flash.3, Press the PROGRAM [PUSH] knob to select the effect. The number will stop flashing.4, While speaking, singing, or playing, turn the channel FX knob up to the desired level on each channel to which you wish to add effects.
5, Adjust the FX [LEVEL] knob on the DIGITAL EFFECTS PROCESSOR up or down fromthe initial 75% setting to achieve your desired overall effects level in the main mix.Step 6: Feedback Detection“Feedback” is the undesirable high-pitched sound created by sound waves looping between the speakers and the microphones.1, If feedback occurs, press the EQ and FBQ ON buttons.2, An LED will light on the EQ slider that corresponds with the specific sound frequency
feeding back.3, Lower the lit EQ slider until feedback stops.
SpecificationsINPUTS 1-44xXLR,electronically balanced Type4x1/4TRS jack, electronically balancedApprox2.2 kohm, balancedImpedance Approx 1.1 kohm, unbalancedInput -21 dBu @PAD/OFF Max.gain +30dB to +10dB Phantom power supply +48VSignal-to-noise ratio -90dB, A-weighted Channel separation 70dB INPUTS 5-84x1/4TS jack, unbalancedType4xRCA jack, unbalanced Impedance Approx,20ohm, unbalancedInput sensitivity -15dBu Max.gain +20dB Signal-to-noise ratio -85dB,A-weightedSTEREO AUXIN1x1/4TS jack, unbalancedType1x stereo minijack, unbalanced Impedance 100Kohm, unbalanced Input sensitivity -8dBu Signal-to-noise ratio -90dB,A-weightedTAPE OUTType 2x RCA , unbalancedImpedance Approx 1KohmMax.output level +17dB, unbalancedChannel separation >70 dB SUB OUTType 1x1/4 mono jack, unbalancedImpedance Approx 1KohmMax.output level +21dBu, unbalanced CHANNEL EQ
BASS ±15dB @80Hz TREBLE ±15dB @12kHzEFFECTSConverter 24-bit delta-sigma Sampling frequency 40kHz Display 2-digit, 7-segment EQType 7-bandLOUDSPEAKER OUTPUTSType 2x1/4 TS jackLoad impedance 8ohm OUTPUT POWER PPA500BTRMS(@8ohm) 2x60 Watts RMS(@4ohm) 2x100 Watts PEAK power(@8ohm) 2x125 Watts PEAK power(@4ohm) 2x250 Watts PPA2000BTRMS(@8ohm) 2x160 Watts RMS(@4ohm) 2x500 Watts PEAK power(@8ohm) 2x250 Watts PEAK power(@4ohm) 2x1000 WattsSYSTEM SPECIFICATIONSFrequency response 50Hz to 20kHz, ±3dBDistortion 0.32%@1W POWER SUPPLYPower consumption 500W for PPA500BT 2000W for PPA2000BT Fuse T 10A H250V(100-120V~,50/60Hz)
T 5A H250V(220-240V~,50/60Hz) Power input AC 100-120V,50/60Hz AC 220-240V,50/60Hz DIMENSIONS/WEIGHTDimensions(HxWxD) Approx.26.0x13.9x34.8Approx.660x354x883mmWeight Approx.68.34 Ibs/approx.31 kg WIRELESS SYSTEMConnector USB Frequency response 20Hz-15kHz,+0/-3dB Weight Approx.68.34 Ibs/approx.31 kg Range Max 120mBLUETOOTH Frequency Range 2402~2480 MHz Channel Number 79 Version Bluetooth spec V2.1+EDR compliant Output power 4dBmModulation Type GFSK ,π/4- DQPSK, 8DPSK Date Rate 3 Mb/s

Navigation menu