Musical Electronics G650 G-BOOM Wireless Boombox User Manual G Boom QSG native 102412v1
Musical Electronics Ltd G-BOOM Wireless Boombox G Boom QSG native 102412v1
user manual
USB Device
Charging
Rechargeable
Battery
WIRELESS BOOMBOX
G-BOOMG-BOOM
Rugged
Construction
PACKAGE CONTENTS:
• G-BOOM Wireless Boombox
• AC Power Adapter
• 3.5mm Line In Audio Cable
• User Guide
Welcome to G-PROJECT
Thanks for purchasing a G-BOOM and joining the G-Project. With just
the right combination of performance, durability, features, and style at
the right price, our goal is to provide rugged speakers and accessories
that t your modern lifestyle. We hope you agree.
For more info, please visit our website at www.enterG-project.com
™
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
NOTE: Any unapproved changes or modications will void the warranty.
IMPORTANT SAFETY NOTIFICATIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DANGEROUS VOLTAGE: The lightning ash with arrowhead symbol,
within an equilateral triangle is intended to alert the user to the presence
of uninsulated dangerous voltage within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WIRELESS BOOMBOX
G-BOOMG-BOOM
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modications
to this equipment may cause harmful interference unless the modications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modication is made.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU’AU FOND.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Compliance information: This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
WIRELESS BOOMBOX
G-BOOMG-BOOM
SURGE PROTECTORS: It is recommended to use a surge protector for AC connection. Lightning and
power surges ARE NOT covered under warranty for this product.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du Canada.
a. Do not expose this unit or the AC/DC adaptor to dripping or splashing water. Keep liquid-lled
objects, such as vases, away from this unit and AC/DC adaptor.
b. Only use attachments / accessories specied by the manufacturer.
c. Ensure that the AC/DC adaptor is easily accessible.
d. Please note the information printed underneath the unit.
e. Do not impede the ventilation of this unit by covering the ventilation openings with items such as
newspapers, table-cloths, curtains, etc.
f. Keep open ames, such as lighted candles, away from this unit.
g. Do not place this unit in closed bookcases, racks, or other spaces without proper ventilation.
h. Unplug this unit during lightning storms or when unused for long periods of time.
i. This unit contains a built-in rechargeable battery. Disposal of these materials may be regulated
due to environmental considerations. For disposal or recycling information, please contact your
local authorities.
j. Do not expose the battery to ames or dispose of it in a re
SAFETY PRECAUTIONS
LOCATION OF CONTROLS
1. Power Button
2. Bluetooth (Pair) Button
3. EQ Button
4. Reverse Button
5. Play / Pause Button
6. Forward Button
7. Volume – Down Button
8. Volume + Up Button
1 7 82 3 4 5 6
WIRELESS BOOMBOX
G-BOOMG-BOOM
FRONT BACK
12 13 14 15910 11
9. Power LED (White)
10. Cha rgin g and
Low Battery LED (Red)
11. Bluetooth LED (Blue)
12. DC Power Input
13. USB Port
14. 3.5mm Aux input
15. Reset Button
INDICATORS
BLUETOOTH LED
When Bluetooth is in pairing mode, the Bluetooth LED will ash blue.
Once Bluetooth has paired successfully, the Bluetooth LED will turn solid blue.
POWER / CHARGING LED
The red and white LEDs indicate the following statuses:
Power Adapter Battery Power White LED Red LED Status
Connected Full OFF OFF OFF --
Connected Not Full OFF OFF ON Battery charging
Connected Full ON ON OFF --
Connected Not Full ON ON ON Battery charging
Not Connected Not Full ON ON OFF Using battery power
Not Connected Low ON ON Flash Battery low
Not Connected Empty OFF OFF OFF Power off,
Cannot power on
WIRELESS BOOMBOX
G-BOOMG-BOOM
INDICATORS (con’t)
The white LED ashes under following statuses:
•
Play/Pause Button on G-Boom is pressed
•
Forward Button or Reverse Button on G-Boom is pressed
•
Volume Button on G-Boom is pressed
•
EQ Setting indication
NOTE: The Forward and Reverse Button do NOT function when playing music through Line-in.
EQUALIZER (EQ)
There are 3 EQ presets: EQ1 = Flat, EQ2 = Rock, EQ3 = Pop
Press the EQ Button repeatedly to cycle through them. The white LED will ash
1, 2 or 3 times when the EQ Button is pressed to indicate preset EQ1, EQ2 or
EQ3 respectively.
NOTE: The default setting is EQ1 (Flat)
POWER SOURCE
Connect the supplied AC adaptor (DC 12V 2A) to the DC In jack on the back of your
G-BOOM and plug the other end into a standard wall outlet (100~240V 50-60Hz).
NOTES: Disconnect both ends of the power cord when not in use. Use only the supplied
AC adaptor with the following specs: AC In - 100-240V AC, 50/ 60Hz / DC Out - 12V 2A.
GETTING CHARGED UP
For rst time use, charge the unit for about 6 hours.
After the initial charge, it takes up to 3.5 hours to charge.
Fully charged battery can operate for about ??? hours
NOTES:
•
The battery is internal and cannot be replaced
•
Actual battery life varies with use, settings, and environmental conditions
•
Rechargeable batteries have a limited number of charge cycles
•
Charge the rechargeable battery at least biannually
AC outlet
AC adapter’s plug
WIRELESS BOOMBOX
G-BOOMG-BOOM
BLUETOOTH OPERATION
You can stream audio wirelessly to your G-BOOM from up to 33’ away using your
iPhone, iPad, iPod, Android, laptop or other A2DP Bluetooth enabled device.
1 Press the Power Button to turn on your G-BOOM.
2 Then press the Pair Button. The blue LED on your G-BOOM will ash.
3 Turn on your A2DP Bluetooth device and enable Bluetooth.
4 Search for Bluetooth devices and select “G-BOOM”. If asked for a password,
enter ‘0000’.
5 The Blue LED on your G-BOOM will change from ashing to solid, indicating that
your Bluetooth device is connected to your G-BOOM
NOTE: Press and hold the Pair Button for 3 seconds to disconnect the Bluetooth connection.
Your G-BOOM will return to pairing mode and the Blue LED will ash.
RECONNECTING YOUR
BLUETOOTH DEVICES
Once your Bluetooth device has been paired with your G-BOOM, it is simple to
reconnect them.
1 Make sure that your G-BOOM is powered on and within range.
2 Select “G-BOOM” from the list on your Bluetooth device.
3 The Blue LED on your G-BOOM will change from ashing to solid, indicating that
your Bluetooth device is reconnected to your G-BOOM
NOTES: For best audio performance, turn the volume on your Bluetooth source device all
the way up.
Your G-BOOM can only play audio from one source at a time. If your G-BOOM is connected
to a Line In source, the Bluetooth will not function. Simply unplug the 3.5mm Line In audio
cable and press the Pair Button to switch to Bluetooth (if necessary, select “G-BOOM” on
your Bluetooth device).
WIRELESS BOOMBOX
G-BOOMG-BOOM
LINE IN CONNECTION
You can also play audio from other devices using the included 3.5mm Line In
Audio cable.
1 Press the Power Button to turn on your G-BOOM.
2 Insert one end of the 3.5mm audio cable into the Line In jack on the back of
your G-BO OM.
3 Insert the other end of the 3.5mm audio cable into the Line Out or headphone jack
of your external audio device (e.g. iPad, iPod shufe, mobile phone, MP3 player,
digital media player, etc.)
NOTE: For best audio performance and minimal distortion, avoid turning the volume on your
audio source all the way up.
USB CHARGING PORT
This unit includes a USB port placed on the rear. The USB port supports powering
and charging most devices including iPhones, iPads, iPods, E-readers, digital
cameras and more. (USB cable sold separately).
TROUBLESHOOTING
Solution
Lower the volume on your G-BOOM and/or audio source
Turn up the volume on your G-BOOM and/or audio source
Recharge the batteries using the included Power Adapter
If using Bluetooth, move the audio source and G-BOOM closer together
(within the 33’ range)
Unpair G-BOOM from your Bluetooth device (check with your device
manufacturer for more information about Bluetooth pairing), then re-pair
following the steps in the section BLUETOOTH OPERATION
Conrm your device is A2DP Bluetooth compatible. Ensure that both your
Bluetooth device and G-BOOM are not connected to any other devices
If your G-BOOM is connected to a Line In source, the Bluetooth will not
function. Unplug the 3.5mm Line In cable and press the Pair Button to
switch to Bluetooth
Unpair G-BOOM from your Bluetooth device (check with your device
manufacturer for more information about Bluetooth pairing), then re-pair
following the steps in the section BLUETOOTH OPERATION
Issue
Distortion
Not loud enough
Intermittent sound
Cannot play audio
via Bluetooth
SPECIFICATIONS
Class 2 Bluetooth Ranges..............................................................................................33ft (10m)
Supported Bluetooth prole.................................................................................................. A2DP
Power.............................................................................................................. 2 x 9W <10% THD
Battery.......................................................................... 7.4V, 1500mAh, Rechargeable Li-Polymer
Battery Playback Time.......................................................................................... Up to ??? hours
Battery Recharging Time............................................................................................ ~ 3.5 hours
Power Adaptor AC Input ................................................................................. 100-240V 50-60Hz
Power Adaptor DC Output .................................................................................................12V 2A
USB Jack DC Power Output ................................................................................................5V 1A
NOTE: Specication are subject to change without notice.
For further assistance, please visit our website at www.enterG-project.com
or contact customer service at support@enterG-project.com or 1-855-896-1795
Life Lab International Ltd.