Myfox BU2002 Open sensor for alarm system User Manual 2

Myfox Open sensor for alarm system Users Manual 2

Contents

Users Manual 2

Download: Myfox BU2002 Open sensor for alarm system User Manual 2
Mirror Download [FCC.gov]Myfox BU2002 Open sensor for alarm system User Manual 2
Document ID2632168
Application IDh4qcn5br+l5nVAebg/YBew==
Document DescriptionUsers Manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize6.35kB (79326 bits)
Date Submitted2015-06-01 00:00:00
Date Available2015-06-01 00:00:00
Creation Date2015-04-03 09:16:18
Producing SoftwareAdobe PDF Library 11.0
Document Lastmod2015-04-03 09:56:15
Document TitleUsers Manual 2
Document CreatorAdobe InDesign CC 2014 (Macintosh)

Sunlight Damage: Do not leave the Products in direct sunlight for more
than several hours at a time. Exposure to direct sunlight can damage the
Products.
These warnings are periodically updated for completeness. Check getmyfox.
com/warnings for the latest version.
In the event you have any question or problem with your Myfox Product,
please contact our support on www.getmyfox.com/support/
FCC Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
• Consult the dealer or an experienced radio/television technician for help
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter should be installed and operated with a minimum distance of 20 centimeters between the radiator and
your body and must not be collocated or operating in conjunction with any
other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could
void the user authority to operate the equipment.
IC Statement
This device complies with Industry Canada licence- exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil est conforme à la norme RSS-210 d’Industrie Canada et aux
réglementations de la FCC. Son utilisation est soumise aux deux conditions
suivantes : (1) cet appareil ne doit pas provoquer d’interférence nuisible et (2)
cet appareil doit être capable de recevoir différentes interférences, y compris
les interférences susceptibles de provoquer un dysfonctionnement. Cet appareil numérique de classe B est conforme à la norme NMB-003 du Canada.
BU0201 - User Manual v1.0. - February 24th, 2015.
LEGAL NOTICE
© 2014, Myfox, All rights reserved
iPad, iPhone and iPod Touch are trademarks of Apple Inc.
Due to their small size, some products of the Myfox Home Alarm range cannot
be properly marked with the legal information required by FCC and IC standards.
They are listed below:
Key Fob for
Myfox Home Alarm
Model:
BU3001
FCC ID:
2ADLABU3001
IC ID:
12538A-BU3001
IntelliTAG for
Myfox Home Alarm
Model:
BU2002
FCC ID:
2ADLABU2002
IC ID:
12538A-BU2002
legalnoticeMHA020432015US.indd 1-2
03/04/2015 09:16
MYFOX PRODUCT & SERVICES WARRANTY & SAFETY WARNINGS
These Myfox Product & Services Warranty and Safety Warnings set
forth certain legal terms applicable to your use of the products and
services provided by Myfox Inc. or any of its subsidiaries, parents, and
affiliates (“Myfox”).
The terms below form one part of the master commercial agreement
between you (“Customer” or “you”) and Myfox (the “Master Agreement”), which includes the following (each, a “Myfox Agreement”),
found at www.getmyfox.com/legal/:
• Myfox Sales Terms & Conditions Agreement
• Myfox Hardware, Applications, and Embedded Software
Agreement
• Myfox Services Agreement
• Myfox Product & Services Warranty and Safety Warnings
• Myfox Additional Terms Applicable to Specific Territories
By establishing an account with Myfox or purchasing or using a Myfox
Product or Myfox Services, you agree to be bound by all terms of the
Master Agreement and any Sub-Agreement that are applicable in the
territory where you are located. Myfox retains the right to modify and
change the Master Agreement or any of the Sub-Agreements, subject
to applicable law, and your continued use of the Myfox Product and/
or Myfox Services indicates your continued acceptance of the Master
Agreement and/or the applicable Sub-Agreement.
For the avoidance of doubt, the Myfox Product & Services Warranty
and Safety Warnings incorporate and are subject to the Myfox Master
Agreement, and also includes and incorporate by reference the Requirements for Proper Use of the Myfox Products.
MYFOX LIMITED WARRANTY
Myfox («Seller») warrants that all Seller hardware («Hardware”) will be
free of material defects in materials and workmanship (the «Warranty»)
for a period of two (2) years from the date of purchase («Warranty Period»). Third party products packaged or shipped with the Hardware are
not covered by this Warranty, and are instead covered by the warranty
provided by their manufacturer, if any.
You must provide Seller with an invoice addressed to you or other valid
proof of purchase for your Product in order to be covered under this
Warranty, and it is your responsibility to retain such proof. Except where
prohibited by applicable law, the Warranty is nontransferable and is limited to the original purchaser. The Warranty gives you specific legal
rights, and you may also have other rights that vary under local laws.
In order to receive Warranty service, you must submit a claim to Seller
by contacting Seller’s warranty hotline at www.getmyfox.com/support/.
If Seller determines that you and the Hardware are covered by this Warranty, you will be provided an RMA authorization number and further
instructions you must follow to obtain Warranty service or replacement
Hardware.
This Warranty does not apply to any Hardware that has been misused,
abused, disassembled, or altered, as determined in Seller’s sole discretion upon Seller’s inspection of the Hardware. In addition, this Warranty
shall not cover: (a) any Hardware whose serial or batch number has
been damaged, amended or erased, (b) damage caused by breach of
the installation or maintenance instructions provided by Seller, (c) failures linked to the power supply, or (d) Hardware with a microprocessor showing signs of impact, overvoltage, or even slight overheating.
If Seller determines in its sole discretion that any defect in material or
workmanship has occurred during the applicable Warranty Period in any
of the Hardware, your sole and exclusive remedy shall be repair or replacement of the defective Hardware at Seller’s option.
Seller reserves the right to clarify, amend, restate or otherwise modify
the terms of the Warranty in its sole discretion. Prior to submitting a
Warranty claim, Seller recommends you visit the support section at
www.getmyfox.com for technical support.
EXCEPT AS SPECIFICALLY PROVIDED IN THIS WARRANTY, SELLER
DISCLAIMS ALL OTHER EXPRESS OR IMPLIED WARRANTIES OF ANY
KIND RELATING TO THE HARDWARE, INCLUDING WITHOUT LIMITATION WARRANTIES OF TITLE OR IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE, TO THE FULLEST EXTENT PERMITTED UNDER APPLICABLE
LAW.
TO THE FULLEST EXTENT PERMITTED BY ANY APPLICABLE LAW,
SELLER HEREBY DISCLAIMS ALL LIABILITY FOR ANY DAMAGES
OR INJURY WHATSOEVER CAUSED BY OR RELATED TO USE OF,
OR INABILITY TO USE, THE HARDWARE UNDER ANY CAUSE OR
ACTION WHATSOEVER OF ANY JURISDICTION, INCLUDING, WIT-
legalnoticeMHA020432015US.indd 3-4
HOUT LIMITATION, ACTIONS FOR BREACH OF WARRANTY, BREACH
OF CONTRACT OR TORT (INCLUDING NEGLIGENCE) AND SELLER
SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY OR CONSEQUENTIAL DAMAGES, INCLUDING FOR LOSS
OF PROFITS, GOODWILL OR DATA, IN ANY WAY WHATSOEVER ARISING OUT OF THE USE OF, OR INABILITY TO USE, THE HARDWARE.
WHEN YOU INSTALL, SET UP, OR USE THE HARDWARE, YOU ARE
GIVEN THE OPPORTUNITY TO ALTER DEFAULTS OR CHOOSE PARTICULAR SETTINGS. THE CHOICES YOU MAKE CAN LEAD TO NON-RECOMMENDED OPERATION OF THE HARDWARE AND/OR YOUR
OTHER EQUIPMENT. YOU ASSUME ALL LIABILITY FOR ANY LOSS
OR OTHER DAMAGE OR LIABILITY RELATING TO YOUR FAILURE TO
MEET THE REQUIREMENTS FOR PROPER USE OF THE PRODUCTS
AND YOUR CHOICE OF PARTICULAR SETTINGS AND SELECTION OR
ADJUSTMENT DEFAULTS.
MYFOX WARNINGS
Please ensure that you read the warnings below before using the products provided by Myfox, including without limitation Myfox Home
Alarm, Myfox Security Camera, and Myfox HC2 (the “Products”).
Limitations of the Products: The Products are not constantly monitored
by Myfox personnel and are inherently subject to failure for a variety of
reasons, including insufficient WiFi signal, third party service outages,
and others. The Products are not a lifesaving solution for people or property at risk in the home, and are no substitute for a monitored emergency notification and response system or trained emergency response
professionals.
Before Using the System: Read and follow all setup and operating instructions provided with the Products, and test the Products after setup
to make sure they are functioning properly. Failure to follow all instructions relating to the Products may compromise their effectiveness.
WiFi and radio Interference: The Products are only effective if your
home WiFi network functions properly and the radio connections
between the Products are working properly. The size, thickness, and materials of the walls, wallpaper, and other materials in your home or the
surrounding environment can interfere with wireless signals and affect
the range and functioning of the Products.
Children: This product should not be used by children under the age
of 13.
Alarm Sound: Sound at high volumes can cause irreparable damage
to your hearing. Do not stand close to the Products while the alarm is
sounding.
Usage Environment: Do not use the Products outside unless the user
manual indicates the Product may be used outdoors. Do not place the
Products in humid areas or other areas where the Products are likely
to get wet, such as a bathroom, as the Products may be damaged by
moisture. Outdoor use of Products that are not designed to function
outdoors may damage the Products and impair the functioning of the
Product, as well as the functioning of any system of which the Product
is a part.
Radio Frequency Interference: The Products can emit radio waves that can
affect the operation of nearby electronics, including cardiac pacemakers. If
you have a pacemaker or other implanted medical device, do not use the
headset without first consulting your doctor or the manufacturer of your
medical device.
Electrical Shock:
To reduce risk of electric shock:
• Do not modify or disassemble any of the components provided
• Do not use the Product if any cable is damaged or any wires
are exposed
• Use only the types of batteries specified in the manual, and
do not use any batteries that appear to be damaged
If a power adapter is provided:
• Do not expose the power adapter to water or moisture
• Unplug the power adapter before cleaning, and clean only
with a dry cloth
• Keep the power adapter away from open flames and other
heat sources
• Use only the power adapter provided with the Product
03/04/2015 09:16

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2015:04:03 09:16:18+02:00
Creator                         : Adobe InDesign CC 2014 (Macintosh)
Modify Date                     : 2015:04:03 09:56:15+02:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:04:03 09:56:15+02:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Instance ID                     : uuid:0c563916-c1dc-44af-8331-492de8f2156a
Original Document ID            : xmp.did:aaefcdab-ff5a-410d-bc33-bba63ebc4ab6
Document ID                     : xmp.id:41815673-a154-4527-b6bd-d40ddef1cfee
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:650dc590-8c37-4d74-bf8f-b04e88c33e58
Derived From Document ID        : xmp.did:650dc590-8c37-4d74-bf8f-b04e88c33e58
Derived From Original Document ID: xmp.did:aaefcdab-ff5a-410d-bc33-bba63ebc4ab6
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2015:04:03 09:16:18+02:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ADLABU2002

Navigation menu