NASCO Fort Atkinson LF01142U Control Transmitter User Manual

Users Manual

Users’ Manual for Nasco Auscultation Remote Control

Summary:

The remote control is the main user interface, where the mode of operation is selected

and the display gives the user feedback about current operation.

Operation:

• To begin using the Auscultation system, press the red Power button. This turns on the

remote control and sends a signal to the stethoscope to activate it, as well. After the unit is

activated, the display will be in the “status” mode, displaying the current menu settings for the

heart and lung conditions.

• To select a new condition, press either the Heart or Lung button. This will put the display into

the menu mode. The user can select a condition by either using the number buttons, or by

viewing the conditions in sequence using the Scroll button.

• When the desired conditions for heart and lung are selected, press the Enter button to

transmit the new set of conditions to the stethoscope. When the Enter button is pressed, the

display will return to status mode. A transmission icon shows that the signal is being sent to

the stethoscope.

• To turn off the unit, press the Power button.

Unit uses two AAA alkaline batteries

WARNING: NO USER SERVICEABLE PARTS INSIDE CASE