NBB Controls Components CMPCTV915 COMPACT-V User Manual

NBB Controls + Components AG COMPACT-V

User Manual

®XXXReceiver Type /VersionFactory No.FrequencyTransmitter Type /VersionFactory No.Frequency
%%Receiver with integrated mounting holes.Multi-pin connecting cable for the receiver according to yourspecifications.For explanatory notes on obtaining an operating permit please refer to registration docu-ments enclosed in the appendix of this operating instruction. Observe all applicable work-safety and accident prevention regulations carefully. Only fully trained, authorized per-sonnel may use the NBB radio control equipment. Components, etc. built into the NBBequipment for safety purposes must be regularly inspected.Failure to observe these recommendations will put both you yourself and others at risk.Under these circumstances, NBB rescinds the guarantee and any other form of liability.This radio control unit is designed exclusively for the control of construction machinesand industrial plants. Only under these conditions are the safety systems (STOP, resp.EMERGENCY STOP, zero setting) fully effective. No other form of use is permitted. Anynon-observance of this condition will relieve NBB of all liability.Optional:The actual delivery specification is as detailed on the confirmation of order or the deliverynote accompanying the goods!Even if you are accustomed to working with radio control systems, read these operatinginstructions carefully before using this equipment. Only this document contains the latestinformation relating to your NBB radio control system.If the NBB radio control unit determines a fault, it must be shut down immediately. Thetransmitter should be switched off with the STOP key, resp. EMERGENCY STOP switch.The connecting cable must be disconnected at the receiver from the connecting socket(terminal) of the unit to be controlled . The repair of the equipment must not be carried outother than by NBB or an NBB authorized technician.1. STANDARD SPECIFICATION2. SAFETY PRECAUTIONS
3. RECEIVERCompact-VMounting possibility of the receiverCompact-V..WRONGMounting on a tower slewing crane.Top slewing crane: Mount the antenna withextension cable horizontally.RIGHTThe receiver is connected to the unit to be controlled with the multi-pin connectingcable supplied. Please observe the instructions issued by the manufacturer of the unitto be controlled!The power supply of the receiver is generally effected by the connecting cable.We recommend urgently to realize this connection via a central, wellaccessible, multi-pin plug connector (for example HTS-plug connector seriesHE/HB/HN/HA or comparable ones of other manufacturers) to make possible a quickand clear fault diagnosis in the service case and to take off the receiver without anexpenditure of assembly.In general, an earth lead is required in case the units to be controlled have not pre-viously been operated by radio control. Failing this, thereceiver electronic circuit will not receive any power supply. Ensure that the opera-ting voltage of the receivercomplieswiththeelectricalspecificationsofthe unit to be controlled. The applicable operating voltage is specified in the supp-lement.Never expose the receiver to a high pressure cleaning jet. This applies to thetransmitter also.The receiver should always be fixed vertically at the outside panel of the swit-ching cabinet. (The antenna should always reach over the top of the panel.)You have to make sure that the antenna is not shielded by metal parts totally or part-ly.Mounting the receiver in a cabine or in a switching cabinet the antenna should belayed with an extension cable to the outside and be attached with the fasteningstrapping as horizontally as possible with distance to the shielding metal parts.In general the antenna should always be mounted in such a way so that the antennais still visible with each change of position of the transmitter.%%%%%%WRONGRIGHTCompact-V
To maintain operational safety, a regular function check of the NBB radio remote control isnecessary. In single-shift day-to-day operation, we recommend performing this check atleast once a week. Checking is possible using the display lights provided on the receiver.To do so, the transmitter must be set to the ready-to-operate state.First connect just the receiver - the transmitter remains switched off.Ensure in particular that there is nobody in the danger area.Irregular flashing means that the HF channel is probably atfault - please set another channel.If this LED flashes, the HF channel is at fault (not in thescanner operation).Steady light notifies the operator that an output function iscritical due to over current.%%%%%ACCIDENT RISK!STOP, resp.Activate the transmitter by unlocking the EMERGENCY STOP switch, resp.pressing the key "START/ON/HORN".Now check the commands (always start with the lowest stage) and check forcorrect function of the unit to be controlled.Press the EMERGENCY STOP switch at thetransmitter until the switch engages, resp. press the STOP key. Then observe ifthe unit to be controlled is switched off (time to switch off according tothe application).Service plug: For NBB service only.EMERGENCY STOP check.Checking the LED's at the receiver Compact-V:LED 1 green: POWER ON. If LED fails to come on, check the power supply.If the power lead is OK, call in the after-sales service.LED 2 yellow: HF PRESENT. Steady light when transmitter is switched on(insignificant for scanner operation).LED 3 green: Flashes evenly during fault-free operation.LED 4 red:4. FUNCTION CHECK1 2www.n bb.de®COMPACT-VX3.820.1195LEDSSERVICE PLUG
The identification plates state the type of transmitter or receiver, the factory number, thefrequency range and the approval number for non EU countries.Always state the factory number in all your queries.Your NBB radio remote control is largely maintenance-free. Nevertheless, please noticethe following points:Remove any leftover building materials!During electro-welding work on the unit to be controlled, disconnect the receiver fromthe current supply! Otherwise there is a risk of damage to the receiver's electronic sy-stem!Check wear and tear parts like dust shield tops regular!We grant a function warranty for 12 months after the sale date for all NBB radio remotecontrols (transmitter, receiver, charger). The warranty covers working time and materialused. Shipping costs shall be charged to the customer. The warranty shall not cover:wear and tear parts, relays and batteries. The function warranty shall be invalidated in thecase of damage, accident damage, negligence, incorrect use, non-compliance with ope-rating conditions, non-compliance with operating, testing and maintenance instructions,and repairs or unit modifications not authorised by NBB.NBB shall not be liable for indirect damage and reserves the right to decide on repair orre-placement.Do not attempt to continue working with a defective NBB radio remote control. Even initial-ly minor defects might be the start of a more extensive defect.Do not try to repair the NBB radio remote control yourself. If there is any fault please con-tact your dealer or our company.%%%Example:XXTransmitter Type / Version:Factory No.:Frequency:HyPro999 899 4990MhzXReceiver Type / Version:Factory No.:Frequency:Compact-V999 899 4990Mhz8. IN CASE OF DEFECTS7. WARRANTY6. MAINTENANCE5. IDENTIFICATION PLATESPage 6
USA:IC CANADA:NOTE: This equipment has been tested and found to comply with the limits for a Class Adigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference when the equipment is operated inacommercialenvironment.Thisequipmentgenerates,uses,andcanradiateradiofrequency energy and, if not installed and used in accordance with the instruction manual,may cause harmful interference to radio communications. Operation of this equipmentin a residential area is likely to cause harmful interference in which casetheuserwillberequired to correct the interference at his own expense.The installer of this radio equipment must ensure that the antenna is locatedor pointed such that it does not emit RF field in excess of Health Canada limits for thegeneral population; consult Safety Code 6, obtainable from Health Canada’s websitewww.hcsc.gc.ca/rpbThis device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause unde-sired operation of the device.RSS-GEN 8.3 statement:This radio transmitter (identify the device by certification number) has been approved byIndustry Canada to operate with the antenna types listed below with the maximum permis-sible gain indicated. Antenna types not included in this list, having a gain greater than themaximum gain indicated for that type, are strictly prohibited for use with this device.Please update accordinglyCet appareil est conforme avec Industrie Canada exempt de licence Rss standard(s).Son fonctionnement est soumis aux deux conditions suivantes :(1) cet appareil ne peut causer d'interférences, et(2) cet appareil doit accepter toute interférence, y compris des interférences qui peuventprovoquer un fonctionnement indésirable du périphérique.ATTENTION:Changes or modifications not expressly approved by the manufacturer could void theuser's authority to operate the equipment!FCC part 15.203 statement:This device is delivered and installed by the original manufacturer of the machine ordelivered and installed by NBB Controls Inc, Richmond VA. It is approved by FCC tooperate with the antenna originally supplied by the original manufacturer of themachine or NBB Controls, Inc, Richmond VA. It is unlawful to change the antenna orchange the antenna installation. Only antennas declared as original spareparts areallowed. Otherwise there is now allowance and it is illegal to operate this device !Attention:9. US-FCC and CANADA IC
®TECHNICAL DATA
Bedienungsanleitung Compact-V,Englisch, Teile-Nr. 3.150.1251, Stand 04.08®APPROVALS AND CERTIFICATESApprovals EU countries:EC Declaration of ConformityM-Zert mbHXXEnclosure:Obtainable at demand:Certificate DIN EN ISO 9001:2008©NBBControls+ComponentsGmbHOtto-Hahn-Straße 3-5DE-75248 Ölbronn-DürrnTel.: 0 72 37 / 9 99 - 0Fax: 0 72 37 / 9 99 - 1 99eMail: sales @nbb.dehttp://www.nbb.deWe reserve the right to alter specifications without notice.

Navigation menu