NBS Payment Solutions LUXE8500I Point of Sale Terminal User Manual
NBS Payment Solutions Inc. Point of Sale Terminal
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3238291 |
| Application ID | CjcBmHVZZF4cBqOahbLasA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 73.6kB (919955 bits) |
| Date Submitted | 2016-12-23 00:00:00 |
| Date Available | 2016-12-23 00:00:00 |
| Creation Date | 2016-11-10 15:20:22 |
| Producing Software | GPL Ghostscript 8.15 |
| Document Lastmod | 2016-11-24 14:05:27 |
| Document Title | 940662-001E_RevA_Luxe8000i_install_111016a_Final.pub |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | tshiroma |
LUXE 8000i FAMILY WARNING Non-compliant power adapters may damage the device. • Do not use if visibly damaged. • Do not expose to temperatures below -10 °C or above 60 °C storage (not powered). INSTALLATION GUIDE FOR 8500i & 8700i INSTALLATION GUIDE FOR 8500i & 8700i • Only use the provided Equinox Payments A/C Power Adapter. • Do not disassemble. LUXE 8000i FAMILY • Intended operating humidity range is 5% to 95% rh (non-condensing). • This device is not designed or cerfied to be used in a flammable atmosphere such as a petrol staon or chemical depot where there is a risk of explosion. • Keep out of reach of children or pets. • Do not incinerate or crush. SAFETY INFORMATION The Luxe Family of devices must be used within the operang condions, electrical supply requirements, environmental condions and connecon requirements as specified below: • Power Supply: These devices must be connected to the correct electrical supply. Connecon to an inappropriate supply may damage or destroy this device(s), thereby invalidang its warranty(s). • Only operate these devices within the temperature range of 0 °C - 45 °C. • Hazardous Environments: These devices must NOT be installed in locaons where there is danger of explosion. FCC/IC COMPLIANCE • FCC ID: COL-LUXE8500I • IC: 2279B-LUXE8500I This device complies with Part 15 of FCC Rules and Industry Canada license-exempt RSS standard(s). Operaon is subject to the following two condions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operaon of the device. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separaon between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The equipment fulfills the applicable FCC requirements with respect to RF exposure to electromagnec fields, when used for the purpose and in the way it is intended and described. WARNING: Changes or modificaons to the equipment that are not expressly approved by the responsible party for compliance could void the user’s authority to operate the equipment. • UL/cUL Listed E249765 If trouble is experienced with this device, please contact Equinox Payments at 1.877.497.3726 for repair or warranty informaon. If this device is causing harm to the telephone network, the telephone company may request that you disconnect this device unl the problem is resolved. NOTICES If a power supply was NOT shipped with the Luxe terminal or if there is NOT an immediately available power supply to use with the Luxe terminal, use the following when selecng and using a suitable power supply: • Must use Equinox P/N 870087-00x or 870088-00x or • Must use a suitably safety Listed power supply, output rated 9-12Vdc 1A or greater AND must be a cerfied Limited Power Source (marked “LPS”). SHIPPING CONTENTS* CLEANING DEVICE Luxe 8000i Family (8500i — 010390-00XE) (8700i — 01039X-00XE) WARNING: • Do NOT use industrial strength or an abrasive cleaner as it may damage or scratch the device/screen. • Do NOT immerse device in any liquid. • Do NOT spray water or cleaner into MSR or Smart Card Reader slots or ports. Apply distilled water or mild cleaner on to a soft, lint free cloth. To clean, gently wipe down the terminal. Equinox Payments 9045 E. Pima Center Pkwy, Suite 3, Sco3sdale, AZ 85258, USA | Tel: +1.877.497.3726 | Fax: +1.480.551.7811 | www.EquinoxPayments.com © 2016 Brookfield Equinox LLC (DBA Equinox Payments), all rights reserved. Equinox Payments & the Equinox Payments logo are registered trademarks of Equinox Payments. Informaon within this guide may not match the terminal device and its accessories exactly and thus are subject to change. 940662-001E Rev. A 11/16 * Contents may not match exactly as shown. 940662-001E 9 4066 2-00 1E LUXE 8000i FAMILY INSTALLATION GUIDE STEP 1: Turn Terminal Over & Insert Cable STEP 2: Angle and Push Cable In Against Terminal SIDE VIEW STEP 3: Rotate Cable Down & Press Firmly to Lock in Place, then Screw to Secure ENLARGED VIEW ENLARGED VIEW NOTE: Use small Philips screwdriver (not provided) to install cable. Moun7ng Holes NOTE: Use M3 threaded mounting screws (no more than 8mm of engagement; arranged in a 50mm x 50mm pattern). Use screwdriver to secure cable Rotate Down to Lock Screws not provided. STEP 4: Turn Terminal Over & Connect Power Source INSPECT SLOTS FOR FOREGIN OBJECTS MSR Slot Smart Card Reader Slot ACCESSORIES NOTE: To remove cable, disconnect power source and then turn the terminal over. Use screwdriver to remove the screw from the cable end. Push cable end in (against the terminal), then lift (rotate) cable up to remove. Visually inspect both the MSR & Smart Card Reader slots for any foreign objects that may obstruct, hamper or prevent the sliding or inserting of your card. If an object exists, do NOT use the device and immediately notify your supervisor for the device may be comprised. If no objects exists, use device as normal. To place an order, contact your Equinox Sales person or: • 1.877.497.3726 or 480.551.7800 • info@equinoxpayments.com 940662-001E Power Cord (810003-001) Power Supply (870088-001E) RJ9 to DB9F Cable (810449-001E) NOTE: Use with 870088-001E. NOTE: Use with 810003-001. NOTE: Use with 810450-004E . Power w/Ethernet Adapter Cable (810450-001E) Power w/Serial Adapter Cable (810450-002E) Power w/USB Adapter Cable (810450-003E) PUSB Adapter (810450-004E) NOTE: Use with 810449-001E.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Author : tshiroma Create Date : 2016:11:10 15:20:22Z Modify Date : 2016:11:24 14:05:27-05:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : tshiroma Title : 940662-001E_RevA_Luxe8000i_install_111016a_Final.pub Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2016:11:24 14:05:27-05:00 Producer : GPL Ghostscript 8.15 Document ID : uuid:111d2ed5-ca6e-45d6-9bfd-2598e391888d Instance ID : uuid:30ab45a4-36d1-435f-9239-e1dd8db265b6 Page Count : 2EXIF Metadata provided by EXIF.tools