NCR Voyix 7777-RBS NCR Orderman Base Station4 User Manual
NCR Corporation, RSD - Atlanta NCR Orderman Base Station4
Contents
- 1. User Manual (Statements).PDF
- 2. User Manual.pdf
User Manual.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2555846 |
| Application ID | b01W+/cg33ITiPAdNCttyg== |
| Document Description | User Manual.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 106.16kB (1326975 bits) |
| Date Submitted | 2015-03-16 00:00:00 |
| Date Available | 2015-03-16 00:00:00 |
| Creation Date | 2015-02-12 13:25:29 |
| Producing Software | Adobe PDF Library 11.0 |
| Document Lastmod | 2015-03-06 10:51:01 |
| Document Title | User Manual.pdf |
| Document Creator | Acrobat PDFMaker 11 für Word |
User Manual NCR Orderman Base Station4 Model 7777-RBS Version 01.04 NCR © 2015 All rights reserved. NCR Orderman Base Station4 User Manual V01.04 General information © 2015 by Orderman GmbH Bachstrasse 59 5023 Salzburg – Austria www.orderman.com We accept no liability for errors or misprints. Copying, even excerpts hereof, is prohibited without the written consent of Orderman GmbH. User Manual NCR Orderman Base Station4 Model 7777-RBS Published February 2015 Version 01.04 Orderman accepts no responsibility for any damage or losses that arise from the use of this manual. Orderman accepts no responsibility for any losses or claims by third parties that arise through the use of Orderman devices. The contents of this manual are subject to changes, which can be implemented without prior notice. This guide does not constitute part of a contract. Trademark: All brand and product names are trademarks or registered trademarks of their corresponding companies. Note: For further questions about operating the device, contact your Orderman partner. Orderman GmbH (Part of NCR Corporation) NCR Orderman Base Station4 User Manual V01.04 General information Contents General information ......................................................................................................... 4 1.1 Warranty .............................................................................................................................................. 4 1.2 Labeling ............................................................................................................................................... 4 1.2.1 1.2.2 Labeling on the unit ............................................................................................................................................. 4 Serial number ...................................................................................................................................................... 5 1.3 Safety notices ..................................................................................................................................... 6 1.3.1 Explanation of symbols........................................................................................................................................ 6 NCR Orderman Base Station4 (OMB4) ........................................................................... 7 2.1 Overview ............................................................................................................................................. 7 2.2 Product description ........................................................................................................................... 8 2.3 NCR Orderman Base Station4 Features .......................................................................................... 8 Installation of the NCR Orderman Base Station4 ........................................................... 9 3.1 Preparation ......................................................................................................................................... 9 3.1.1 3.1.2 3.1.3 3.1.4 Installing the antenna .......................................................................................................................................... 9 Uninstalling the antenna ...................................................................................................................................... 9 Removing/replacing the housing cover.............................................................................................................. 10 Uninstalling/installing the mounting plate........................................................................................................... 11 3.2 Setup.................................................................................................................................................. 12 3.2.1 3.2.2 3.2.3 Standing position ............................................................................................................................................... 13 Wall/ceiling installation ...................................................................................................................................... 14 Installation in a false ceiling ............................................................................................................................... 16 3.3 Cabling .............................................................................................................................................. 17 Operation ........................................................................................................................ 18 4.1 Operation with power supply unit .................................................................................................. 18 4.2 Operation with Power over Ethernet (network-powered)............................................................. 18 4.3 Status indicator ................................................................................................................................ 18 Cleaning instructions..................................................................................................... 19 Technical specifications ................................................................................................ 20 Troubleshooting ............................................................................................................. 21 7.1 Troubleshooting and corrective actions........................................................................................ 21 7.2 Factory reset on the OBS ................................................................................................................ 22 Country list ..................................................................................................................... 23 Index ............................................................................................................................... 24 10 Glossary.......................................................................................................................... 25 Orderman GmbH (Part of NCR Corporation) NCR Orderman Base Station4 User Manual V01.04 General information General information This manual is intended for use with the NCR Orderman Base Station4 (OBS) Model 7777-RBS. The “NCR Orderman Base Station4” is used for radio transmission, and forms the connecting link between the Orderman handheld radio units and the PC-based POS systems. In this manual, we refer to the “NCR Orderman Base Station4” as the "OBS". 1.1 Warranty All warranty claims must be addressed to your local Orderman contractual partners. 1.2 Labeling The labeling provides information on certifications, standards, product descriptions and manufacturer specifications. 1.2.1 Labeling on the unit The labeling (model plate) is located on top of the unit. Fig. 1: Labeling Housing Orderman GmbH (Part of NCR Corporation) Model plate NCR Orderman Base Station4 1.2.2 User Manual V01.04 General information Serial number The serial number is used to uniquely identify the unit. The serial number is located on the model plate. Fig. 2: Serial number Serial number Orderman GmbH (Part of NCR Corporation) NCR Orderman Base Station4 User Manual V01.04 1.3 Safety notices 1.3.1 Explanation of symbols General information Icons and signal words indicate the degree of danger that will result, unless actions to reduce damage are taken. Caution Caution means that minor property damage can occur. Caution is highlighted by horizontal lines above and below the text. Warning Warning means that minor personal injury or serious damage to property can occur. Warnings are highlighted by horizontal lines above and below the text. Danger Danger means that serious personal injury can occur. In particularly serious cases, there is danger to life. Danger is highlighted by horizontal lines above and below the text. Notes Notes are indicated in the text by the adjoining icon. In cases in which there are no imminent dangers for personnel or equipment, notices contain important information. Notes are highlighted by horizontal lines above and below the text. Tips Tips describe non-binding recommendations. Tips are highlighted by horizontal lines above and below the text. Orderman GmbH (Part of NCR Corporation) NCR Orderman Base Station4 User Manual V01.04 NCR Orderman Base Station4 (OMB4) NCR Orderman Base Station4 (OMB4) 2.1 Overview Fig. 3: NCR Orderman Base Station4 (OMB4) Antenna Housing cover Orderman GmbH (Part of NCR Corporation) Housing Mounting plate NCR Orderman Base Station4 2.2 User Manual V01.04 NCR Orderman Base Station4 (OMB4) Product description The NCR Orderman Base Station4 is specially designed to connect with an Orderman secure radio (OSR). The NCR Orderman Base Station4 can be installed in standing position, hanging from a wall or ceiling, or suspended in a false ceiling. 2.3 NCR Orderman Base Station4 Features Feature Radio Network Power supply Status indicator 433 MHz or 915 MHz Ethernet 10Mbit/100Mbit/1Gbit 2 Ethernet ports Power supply unit or Power over Ethernet (PoE) Status LED Orderman GmbH (Part of NCR Corporation) NCR Orderman Base Station4 User Manual V01.04 Installation of the NCR Orderman Base Station4 Installation of the NCR Orderman Base Station4 3.1 Preparation 3.1.1 Installing the antenna The antenna is screwed into the housing with a right-hand thread. Turn the antenna in a clockwise direction (using finger force) into the housing until it hits the end stop. It is not necessary to use a tool. Fig. 4: Screwing in the antenna 3.1.2 Uninstalling the antenna The antenna is connected to the housing with a right-hand thread. To remove the antenna from the housing, turn it in a counter-clockwise direction. Fig. 5: Unscrewing the antenna Orderman GmbH (Part of NCR Corporation) NCR Orderman Base Station4 3.1.3 User Manual V01.04 Installation of the NCR Orderman Base Station4 Removing/replacing the housing cover For connection, i.e. for installation, you must remove the housing cover. It is not necessary to remove the antenna. 3.1.3.1 Removing the housing cover Press on the housing cover with one hand on the opposite side of the cable outlet. Lift the housing cover with a finger at the cable outlet. Fig. 6: Removing the housing cover Cable outlet rderman 3.1.3.2 Replacing the housing cover To install the housing cover, press the opposite side of the cable outlet into the holder for the housing. Then press the housing cover (cable outlet side) downward until it latches into place. Fig. 7: Replacing the housing cover Cable outlet Orderman GmbH (Part of NCR Corporation) 10 NCR Orderman Base Station4 3.1.4 User Manual V01.04 Installation of the NCR Orderman Base Station4 Uninstalling/installing the mounting plate 3.1.4.1 Uninstalling the mounting plate To remove the mounting plate from the housing, release the two retaining clips by pressing them away from the housing. The mounting plate is released by pressing the retaining clips. Fig. 8: Removing the housing from the mounting plate Housing Retaining clips 3.1.4.2 Installing the mounting plate Place the housing above the mounting plate. The retaining clips should stick through the housing. By lightly pressing on the housing, the retaining clips snap into place (clicking sound). Check whether the housing has latched properly into place on both sides by lightly pressing the retaining clips. Fig. 9: Placing the housing on the mounting plate housing Retaining clips Orderman GmbH (Part of NCR Corporation) 11 NCR Orderman Base Station4 3.2 User Manual V01.04 Installation of the NCR Orderman Base Station4 Setup The NCR Orderman Base Station4 is designed to be set up indoors. It can be positioned standing, on the wall, overhead (ceiling mount) or suspended in a false ceiling. For optimal radio performance, avoid installation close to metal objects. Note: For installation of more than one OBS, the following minimum clearances are required: - minimum of 4 meters from one OBS to the next OBS - minimum of 8 meters from one OBS to the next OBS2 or OBS3 Caution: The operating temperature (ambient temperature) for the OBS is 0°C to +50°C. The operating temperature (ambient temperature) for the Orderman power supply is 0°C to +40°C. Operation outside of specified operating temperature limits is prohibited. Note Use only the Orderman power supply unit provided in the delivery scope. If the NCR Orderman Base Station4 is operated with the power supply unit, the operating temperature limits for the power supply unit also apply. You will find more information on the subject of putting the unit into operation in Orderman's installation instructions. Orderman GmbH (Part of NCR Corporation) 12 NCR Orderman Base Station4 3.2.1 User Manual V01.04 Installation of the NCR Orderman Base Station4 Standing position Rubber nubs on the underside of the mounting plate increase the stability. Fig. 10: Standing position Rubber nubs Orderman GmbH (Part of NCR Corporation) 13 NCR Orderman Base Station4 3.2.2 User Manual V01.04 Installation of the NCR Orderman Base Station4 Wall/ceiling installation For wall/ceiling installation, the mounting plate has 2 mount holes. As the fastening means for concrete masonry Orderman recommends a 6 x 30 mm wall plug and a 4 x 35 mm universal screw with countersunk head. For other masonry, the proper plugs and screws must be used (screw with countersunk head, max. thread diameter of 4.5mm). Fig. 11: Ceiling installation Ceiling Countersunk screw (4 x 35) Plug (6 x 30) Fig. 12: Wall installation Wall Countersunk screw (4 x 30) Plug (6 x 30) Orderman GmbH (Part of NCR Corporation) 14 NCR Orderman Base Station4 User Manual V01.04 Installation of the NCR Orderman Base Station4 Note: For the wall and ceiling installation, the mounting surface must be absolutely level. For a wall mount, we recommend you install the mounting plate with the cable outlet point downward. The arrow in the mounting plate must point upward. Fig. 13: Wall installation Arrow (should point upward) 2 mounting holes Cable outlet Note: Turn the screws with care until countersunk. Too high a torque on the screws can damage the mounting plate. Orderman GmbH (Part of NCR Corporation) 15 NCR Orderman Base Station4 3.2.3 User Manual V01.04 Installation of the NCR Orderman Base Station4 Installation in a false ceiling For installation in a false ceiling, clips are provided to compensate for the wedge profile of the housing. The following steps must be followed: Press both distancing strips as shown in the figure until the clips click into place in the counter surface. Break or cut the two retaining clips from the mounting plate with a knife. Warning: Breaking off or cutting off the retaining clips may result in sharp edges (risk of injury). Fig. 14: Installation in a false ceiling Mounting plate Retaining clips Distancing strips Fig. 15: Installation in a false ceiling Ø 35 mm Orderman GmbH (Part of NCR Corporation) 16 Housing False ceiling Hole in a false ceiling Antenna Distancing strip Mounting plate NCR Orderman Base Station4 3.3 User Manual V01.04 Installation of the NCR Orderman Base Station4 Cabling The NCR Orderman Base Station4 can only be connected with an Ethernet network. Two RJ45 ports are located on the top of the housing. The port labeled PoE can also be used for power supply via the network (accessory required). Note: If another Ethernet device is connected to the second Ethernet port (ETH), this device cannot be supplied with voltage via the network. Fig. 16: Connections PoE (Power over Ethernet) RJ45 Port for Orderman 12V power supply Orderman GmbH (Part of NCR Corporation) ETH RJ45 Ethernet 17 NCR Orderman Base Station4 User Manual V01.04 Operation 4.1 Operation with power supply unit Operation Note: Comply with the operating temperature range (ambient temperature) for the power supply unit. Use only the original power supply unit for the NCR Orderman Base Station4. 4.2 Operation with Power over Ethernet (network-powered) There are two options for using Power over Ethernet: 4.3 Direct supply via PoE network switch Use of a PoE injector (available as Orderman accessory) Status indicator The OBS's light ring displays information about the following operating states: Color Status Blue Startup, booting up Green Connection to host system is active Pink Not connected to network Yellow No connection to host system Red Error Does not light up No or very low power supply Fig. 17: Light ring Light ring Orderman GmbH (Part of NCR Corporation) 18 NCR Orderman Base Station4 User Manual V01.04 Cleaning instructions Cleaning instructions Observe the following care tips: Wipe the surface with a damp, soft cloth. Do not use abrasive agents or cloths with a rough surface. Clean the ports: Never clean the sockets with compressed air or pointed objects! Note: Never use alcohol or corrosive liquids to clean the Orderman units. Orderman GmbH (Part of NCR Corporation) 19 NCR Orderman Base Station4 User Manual V01.04 Technical specifications Technical specifications Function Radio frequency 433 MHz, 915 MHz* Frequency band OBS version 433MHz = 433,150MHz – 434,650MHz OBS version 915MHz = 902,000MHz – 928,000MHz Transmitting power less than 1 mW ERP Power over Ethernet (PoE) IEEE 802.3at-2009 Type 1 (IEEE 802.3af-2003 compatible) Protection type IPX4 Dimensions L/W/H mm without antenna with antenna 160x160x50 160x160x190 Weight 750 grams *see country list DETACHABLE ANTENNA USAGE This radio transmitter (IC: 470B-7777RBS / Model: 7777-RBS) has been approved by Industry Canada to operate with the antenna type listed below with maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (IC: 470B-7777RBS / Model: 7777-RBS) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Approved antenna(s) list Type Gain Brand Model No. Frequency range Country Dipole 2.15 dBi NCR 497-0503602 902 - 928MHz FCC/IC Dipole 2 dBi Panorama Antennas PCG-TNC-921 880 – 960MHz FCC/IC Orderman GmbH (Part of NCR Corporation) 20 NCR Orderman Base Station4 User Manual V01.04 Troubleshooting 7.1 Troubleshooting and corrective actions Troubleshooting Error Possible cause Possible solution Cannot connect to Orderman radio network No network connection from NCR Orderman Base Station4 to host system Check the cables and power supply to the OBS Range exceeded Change position of the OBS accordingly Radio interference (other Orderman radio network) Change radio channel Network configuration was changed Check/change network configuration Very long transmission times on the radio path Radio interference from other devices (baby monitor, handheld radio transmitter, remote control, etc.) NCR Orderman Base Station status indicator Pink Not connected to network Yellow No connection to host system There is no network connection to the NCR Orderman Base Station4 Check the OBS network cable There is no network connection to the NCR Orderman Base Station4 Host system is switched off or network problem at host Check firewall settings Firewall settings Red Error in configuration System Center − Check the status of the OBS in the System Center Error − Eliminate error in configuration − Reset the OBS in the System Center − Run a factory reset in the System Center OBS − Hardware is defective Orderman GmbH (Part of NCR Corporation) 21 Run a factory reset by pressing the Reset button on the OBS Send the unit to the service department NCR Orderman Base Station4 7.2 User Manual V01.04 Troubleshooting Factory reset on the OBS Action Press and hold Reset button for 20 seconds Time Status 2 seconds 5 seconds The status indicator lights up blue for 5 seconds 10 seconds The status indicator does not light up for 10 seconds 3 seconds The status indicator lights up white for 3 seconds This triggers the factory reset function. After running a factory resent, the indicator lights up red (unit not configured) Configure the unit in the System Center Orderman GmbH (Part of NCR Corporation) After successful configuration, the status indicator is green 22 NCR Orderman Base Station4 User Manual V01.04 Country list Country list The NCR Orderman Base Station4 is available in two different frequency versions. Note: Make sure that the right OBS version is installed (see table) to match the country selected. Country OBS Versions European Union 433MHz Switzerland 433MHz Turkey 433MHz Russia 433MHz USA 915MHz Canada 915MHz Note: Use of frequency bandwidths is regulated by federal laws and must be strictly observed. OBS frequencies are in the range of the SRD bandwidth (SRD – short range devices) In these frequency bandwidths, which differ somewhat worldwide, the transmitting power and the interference for neighboring frequency ranges are regulated. Orderman GmbH (Part of NCR Corporation) 23 NCR Orderman Base Station4 User Manual V01.04 Index Index Care tips 20 Certifications 4 Labeling 4 Manufacturer information 4 Model plate 4 Orderman contractual partners 4 Orderman partner 2 Orderman Secure Radio (OSR) 8 Product name 4 Orderman GmbH (Part of NCR Corporation) 24 Radio base station 22 Serial number 5 Standards 4 Warranty claims 4 NCR Orderman Base Station4 10 User Manual V01.04 Glossary Glossary Firmware As firmware refers to the operating software (Operating System) of the electronic devices. Handheld A handheld in this manual refers to all the versions of Orderman handhelds. LED (Light-Emitting Diode) LEDs convert electrical energy into very energy-efficient light. LEDs have a very long life. NCR Orderman Base Station4 (OBS) The NCR Orderman Base Station4 enables users to connect Orderman handhelds to a host system. Orderman Secure Radio The Orderman secure radio uses the 433MHz or 915MHz, depending on application area. The ability to penetrate solid objects, the large range, the minimal power consumption, the interference resistant and hacker-proof design are considerably better than other radio networks. Wireless LAN (Wireless Local Area Network) Wireless LAN is the term used for local radio networks. Orderman GmbH (Part of NCR Corporation) 25
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Copy, Extract Tagged PDF : Yes Page Mode : UseOutlines XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2015:03:06 10:51:01+08:00 Create Date : 2015:02:12 13:25:29+01:00 Metadata Date : 2015:03:06 10:51:01+08:00 Creator Tool : Acrobat PDFMaker 11 für Word Document ID : uuid:01c0a7b7-d332-4a43-bf4e-304bccadb3ac Instance ID : uuid:17fb30cb-5ea5-481a-b0f1-225369ddf002 Format : application/pdf Title : Creator : Producer : Adobe PDF Library 11.0 Page Count : 25 Author :EXIF Metadata provided by EXIF.tools