NEC of America 7N2R13A PCS GSM Phone with RFID User Manual

NEC Corporation of America PCS GSM Phone with RFID Users Manual

a href="https://usermanual.wiki/NEC-of-America" itemprop="url"> NEC of America >

Users Manual

1Making a Voice/Videophone Call1Enter the phone number of the other partyThe “Enter phone number screen” appears. Always start by entering the area code, even for calls within the same area. You can enter up to 80 digits for the phone number. However, only the last 26 digits are displayed. <When you enter a wrong number>■To insert a numberPress v to move the cursor to the number to the left of the position where you want to insert the number, then enter the number. ■To delete a numberPress v to move the cursor to the number you want to delete, then press t. Hold down t for 1 second or longer to delete all the numbers to the left of the cursor and the number in the cursor position. ■To re-enter the numberMove the cursor to the beginning or end of the number and hold down t for 1 second or longer to return to the standby screen. 2r (voice call) /o (V. phone)* As N-03A is not equipped with the front camera, during a videophone call, you can send only the substitute image (Chara-den) or image from the rear camera to the other party. You can change the substitute image (Chara-den) to other data such as an image of My picture in “Select image”.→P. 7 1<Videophone>■To change the substitute image (Chara-den)XFu (FUNC)X“Select image”X“Chara-den” XSelect Chara-denEnter phone numberFunction menu¨P. 3<Voice call>The “In-call screen” appears. “ ” flashes while dialing and lights up during the call. ■If you hear the busy toneThe line is busy. Call again after a while. ■If you hear a message saying that the other party cannot be reachedThe other party’s mobile phone is not turned on or is out of signal range. Call again after a while. ■If you hear a message requesting your caller IDCall again with caller ID notification enabled. →PP.48, 59<Videophone>The “Videophone in-call screen” appears. “ ” flashes while dialing a videophone call and lights up during the call. ■If a videophone call is not connected→P.2■To switch between substitute image and camera imageXFDd (Change)Each time you press FDd (Change), the substitute image and camera image switches. ■To switch the main screenXDd (1 second or longer)“Change main disp.”→P. 3■To enlarge the camera image to be sentXAdjust the zoom using FvZoom→P.138■To mute the voice to sendXSa (マナー ) (1 second or longer)The “ ” icon is displayed. To cancel muting, press Sa (マナー ) for 1 second or longer again. In-callVideophone in-callFunction menu¨P. 3
Download:
Mirror Download [FCC.gov]
Document ID1005289
Application IDwQ8BdxdT9NkgxK8Nte4vKQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize68.69kB (858591 bits)
Date Submitted2008-09-23 00:00:00
Date Available2009-03-22 00:00:00
Creation Date2007-10-29 14:36:49
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2008-09-23 10:29:46
Document TitleUsers Manual
Document CreatorFrameMaker 7.1
FCC ID Filing: A98-7N2R13A

Navigation menu