NEC of America KMP6J1F1-1A Dual-Band GSM/ GPRS Phone User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	344469
Application ID	c4w2b7LKT9C3JNzKR84BYA==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	126.1kB (1576212 bits)
Date Submitted	2003-07-30 00:00:00
Date Available	2003-07-30 00:00:00
Creation Date	2003-07-29 11:24:03
Producing Software	Acrobat 5.0 Scan Plug-in for Windows
Document Lastmod	2003-07-30 19:46:39
Document Title	Users Manual 2
Document Creator	Acrobat 5.0 Scan Plug-in for Windows

DTMF Tones
Dual tone multi-frequency (DTMF) tones are used to send digital signals to over—thephone automated services that allow access to
information or accounts, e.g., use a specific language, access to specific information, account number and password to financial
accounts, voice mail, etc. These DTMF tones may be annoying during multi-party calls. You can turn DTMF tone Off to be considerate
so that the participants do not hear these tones when you input the number of another panicipant. The tones can only be sent when a
call is connected.
To turn DTMF tones Off from the Call in progress screen (during a phone call):
i.“ Press MEfllll (Options Menu), 7, and 2.
To turn DTMF tones On:
it Press MENU (Options Menu), 1, and I.
New Call
The associated parties will hear the DTMF tones while you dial another person. Use the instructions in the previous topic to turn Off the
DTMF tones. When the new call is connected, the original call is automatically placed on Hold.
T0 dial a new call while in a multi-party call,
‘ Press MENU (Options Menu) and 3 to display the Dialer screen.
Input the phone number and press!" (Send) to connect to the number.
Conference Calls
it your SIM card is mum-party enabled (the Network supports conference calling), you can make a conference call to more than one
caller. The 3-way and up to 6-way conference call depends on the network service provider. Extra fees may apply for conference calls.
The associated parties will hear the DTMF tones while you dial another person to add to the conference. Use the instructions in the
previous topic to turn Off the DTMF tones. When the call is being dialed, the associated parties of the multi-party call are placed on
mute and cannot hear the conversation until the new caller is added to the conference call.
You can leave the conference call while the remaining participants carry on with the call. (See Flag.)
A multi-party call is considered as one call in progress.
To use the 3»way conference call feature from the Call in progress screen with one call already in progress (first connected call):
0 Input a phone number and press(‘ (Send) to connecta second call and automatically place the first call on hold. If the call is
successful, the Call in progress screen displays showing the first call with on hold status and the highlighted second call with
connected status.
Press MENU (Options Menu) and 5 to briefly display the busy screen and second party is added to the conference call.
To continue adding a third, fourth, and fifth party to conference calling (if Network supported), repeat the two steps of 3-way conference
calling.
It adding a call to conference calling is unsuccessful, the failure screen displays briefly and the phone returns to the previous status.
fl Hoi’afng
* __ Top Dog
2124236363
If you already have 2 calls in
progress (whether active, on hold,
or mutii-party), a third incoming call
can not be accepted because the
Softkey 1 (Accept) wiil not be
displayed on the incoming call
screen.
Do not press 6 (End/On-Ofi) to
reject an incoming call if you
already have 2 calls in progress.
Pressing ® (End/On-Off) with 2
calls in progress does not reject an
incoming call but will disconnect a
mil in progress.
Private Conversation
During a multiparty call, you can select one participant tor a private conversation while the other participants continue the conlerence
call. (See Flag.)
r.‘ Press A (Up) or 7 (Down) navigation key to highlight the participant.
Press MENU (Options Menu) ands to brielly display the busy screen for Private conversation and begin the private
conversation.
Press 65 (End) to end a private conversation and the call,
To end the private conversation and add the party back to the rnultiaparty call:
u— Press MENU (Options Menu) and ti. This combines the two calls back into a single multiparty call and all members are active,
Disconnecting a Party
During a multi—party call, you can disconnect one oi the participants and continue the call with remaining participants lrorn the Call in
progress screen.
0" Press A (Up) or 7 (Down) navigation key to highlight the participant to disconnect.
Press MENU (Options Menu) and 9 to disconnect the participant trorn the conference call.
Recording a Cat!
You can record up to 20 seconds ot a conversation. (See Flag.) A recorded conversation is stored in Voice memo (see page ). To
record a received ordialed call trom the Call in progress screen:
it“ Press MENU (Options Menu), 8, and Sunkey 1 (record) to record. Press Soflksy 2 (Stop) to end recording betore the 20
second time lapse.
At the end of 20 seconds, recording automatically stops and the Call in progress screen displays.
IR Send/ Receive
lR is short for inlrared. The tntrared Data Association, a group oi device manufacturers, developed a standard tor transmitting data via
inlrared light waves through an IR port. Tire intrared port enables you to transfer data lrom one 525 wireless phone to another 525
wireless phone without any cables. The two wireless phones must be within a lew feet of each other and there must be a clear line of
sight between them. Data from the Phone phonebook, Scheduler, and To Do may be transmitted using the IR options.
it)
Two calls are on the phone: the
multi—party call and the active single
call of the private conversation. The
members of the multi-parzy call can
still speak to each other on the one
call while the private conversation is
the other call.
Recording of phone calls is subject
to varying State and Federal laws
regarding privacy and recording of
phone conversations,
For further inlorrnation regarding
sending data via lit, refer to:
Phonebaok, IR Sending, page
Scheduler, IR Sending, page
To Do List, IR Sending, page
lit Receive, page ,
iRPofl
Personalizing Settings
To access the Settings menu:
(T BD)
Text entries tor messages, Emails, phonebook names, task descriptions, notepad, field entries, etc. are input at the text editor screen.
At any highlighted entry tield, press 0 (Select) to display the text editor screen.
To change the text entry mode between normal text (ABC), T9” Text Entry (T9) or numeric entry (123), prestoflkefl (Mode). The
text entry mode displays at the bottom 01 the display screen above the Sol'tkey 1 indicator.
To toggle between lower case, shiit'r ( upper case for one letter and returns to lower case text entry) and caps loclmtpermanent
upper case), press the* (Asterisk Symbol). Shift and caps lock display on the screen above the Soitkey 2 indicator.
To toggle the active symbol mode On and Ott, press the# (Number Symbol). There are three ditterent symbol tables available on the
next page. The symbols are special characters, symbols, and punctuation available tortext entry.
Press MEIIII (Options Menu) at the text editor screen to display text Options menu that allows you to select settings for text formatting
and characteristics.
Press 4 (Lett), > (Flight), V (Down), orA (Up) navigation key to move the cursor within text, To remove unwanted characters,
press CLR (Clear/Back) key. Remove a single character or space to the left of the cursor with the Clear Mode set as “Backspace” in Edi
settings. Remove a single character or space to the right 01 the cursor with the Clear Mode set as "Delete" in Edit settings.
The maximum numberot characters is defined as the number ol single-byte characters (alphanumeric characters, etc.) allowed in a
field/description. it a double or triple byte character such as a special symbol is used, the number of characters allowed will vary
accordingly.
Normal Text (ABC)
At the text editor screen, pressSoflkey 1 (Mode) until the ABC appears above the Soltkey 1 indicator. ABC text entry is also known as
multi-tap entry. Each number key press contains more than one letter and successive presses are needed to obtain the desired letter.
Press a number key that contains the desired letter. The available characters for the pressed number key replace ABC above the Sottkey
1 indicator until another number key is pressed.
Successive presses oi the same number key displays the next available character on the text editor screen.
With the required character displayed when entering normal (ABC) text, pres} (Right) navigation key to move to the next character
position. It you wait for more than 1 second, the cursor moves one character to the right automatically.
Press 0 to create a space between words.
umbers
At the text editor screen, pressSoflkey 1 (Mode) until the 123 appears above the Soltkey 1 indicator on the display screen. Press the
number keys to enter the desired number(s).
M] o e n e rs ita=1ozc
Mode rerun fiance]
. fer,
123 R=1024
Mode leggy, Cancel,
T9 Text Entr
At the text editor screen, pressSoflkey 1 (Mode) until the T9 appears above the Soltkey 1 indicator on the display screen.
T9 text entry is last, easy and intuitive text input. Press one key per letter in a word, The phone predicts or guesses what you are writing.
For exampie, to enter the word "show,” spell out the word by pressing tour keys: 7, 4, 6, and 9. TD' text input recognizes that the most
commonly used word matching that numeric entn/ sequence is “show."
It more than one word shares the same numeric entry sequence. the most commonly used word displays highlighted. The number of
available words (for example, 1 of l 1) displays beside the T9 above the Softkey 1 indicator. If the highlighted word is not the desired
word, press Soflkey 1 (Prev) or Soflksy Z (Next) until the desired word displays.
Press 0 to insert a space after a word.
It the T9 word list does not contain the desired word:
t.“ Enter any characters tillSoflkey 2 (Next) indicator on the display screen changes toSoflkey 2 (Spell?)
Pressaiéfctgrey 2 (Spell?) to change the text editor into Spell mode. The text entry mode automatically becomes normal text
en ry .
Press cm (Clear/Back) to delete unnecessary letters and input the characters for the new word.
Press Soflksy 1 (T9) to return to T9 text entry.
5 rmbol Mode
In the symbol mode, the screen displays the available symbols (see the symbol screens below). Press thfi’ (Number Symbol) key in
text entry mode to turn On and Oil the symbol mode. Press4 (Left)? (Right),V (Down), orA (Up) navigation key to highlight
the desired symbol and pressSottkey1 (OK) or if) (Select). The required symbol displays on the text editor screen.
Make sure that the cursor is positioned where you want to input the symbol. if a word is highlighted in T9 text entry, move the cursor to
the end of the word. The symbol mode cannot be used if a word is highlighted.
The symbol screen on the left is used by 2 fields: To and Cc lields of New Email. The symbol screen in the center is used by 9 fields
and 3 text editor options: the To and Message fields of SMS; the To and Message fields of EMS; the To field of MMS; To, Subject, and
Message fields of New Email-SMS; Enter address field for Go to webpage; the Edit Text of MMS Composer Options menu; the Add
folder or Bookmark Options menu; and Edit title option of the SM list menu. All other fields and text editor options use the symbol
screen on the right.
g; y i . Enamel
Used for To and cc fields Used by 9 fields and Used by all other fields
of New Email 3 text editor options and text editor options
At any iield to input information (except number lields). pressO (Select) to display the text editor screen An Options menu is available
at the text editor screen that allows:
0 Color. iorrnat, and alignment changes oi the text.
0 Highlight mode turned On and Oil to copy. cut, delete a word. paragraph or all.
0 Paste what is copied in the highlight mode.
0 Create and insert canned text.
0 inserting a graphic from a provided list of emoticons.
0 Insening a sound. or picture irom 3 provided list.
0 identity the T9 text entry language.
0 Edit setting changes.
Not all at the menu options are available for all lields. An option is grayed out when it is not available for text entry.
Text Color
At the text editor screen,
if Press MENU (Options Menu) and1 to display the Text Color screen.
Press 4 Left). P (Right), V (Down). orA (Up) navigation key to highlight the desired text color or background color and
press D( elect).
Press Softkey 1 (OK) to save the changes or pressSottkey 2 (Cancel) to cancel the changes and return to the text editor
screen.
Text Format
At the text editor screen.
it Press MENU (Options Menu) and2 to display the Text Format screen.
Highlight the Font field and press4 (Left) or} (Right) navigation key to cycle the tont names.
Highlight the desired Text Format field and press?) (Select) to check or uncheck the text format box.
Press Soflkey 1 (0K) to save the changes or pressSoflkey 2 (Cancel) to cancel the
changes and return to the text editor screen,
Text Alignment
At the text editor screen.
if Press MENU (Options Menu) ands to display the Text Alignment screen.
Highlight the desired Text Alignment field and pressD (Select). Radio button for the field
is n.
Press Softkey 1 (OK) to save the changes or pressSoftkey 2 (Cancel) to cancel the
changes and return to the text editor screen.
mam a‘rmi
Options
1; Text color...
" nl Quasi?
a smile Text
‘Fem Normal 0
Textfcrme‘t
. J Bald
' '..l italics
Text Paste
After selecting the text in the Highlight mode that was copied or cut (explained in the next topic), return to the text editor Si‘ an. At the
text editor screen:
il‘ Use the navigation keys to place the cursor where the text is to be inserted/pasted.
Press MENU (Options Menu) and4 to insert/paste the text.
Continue with text entry.
Text Highlight
Highlight mode provides an Options menu to:
0 Change the text color or text format ot selected text,
0 Copy or cut selected text in highlight mode to be inserted/pasted (explained in previous topic) into the text editor screen.
0 Delete selected text.
0 Highlight a word, paragraph, or all text.
At the text editor screen,
fl“ Press MENU (Options Menu) ands to display the text editor screen in Highlight mode.
To move the cursor without highlighting, (PressSoflke 1 (Oh) turn Oh the highlight mode. Once the cursor is positioned, press
Soflkey 1 (On) to turn the highlight mo e On. (See F ag.)
Press 4 (Lelt) or P (Right) navigation key to highlight the wordis) or paragraph(s) or position the cursor.
With the selected text highlighted (a word, paragbraph, or all text), prestIENlJ (Options Menu) to display the Highlight mode
Options menu and input the corresponding num er: _
1 To change the text color ol the selected text on the text editor screen.
2 To change the text tormat ot the selected text on the text editor screen.
3 To cop the selected text. . .
4 To cu remove the selected text where it is located on the text editor screen.
5 To delete the selected text train the text editor screen.
With the cursor positioned and highlight modetturned Oil (the Sottkey1 indicator displays On), presMEllIl (Options Menu) to
display the Hi hlight mode Options menu and input the corresponding number:
a To ighlight the word that the cursor is positioned wtthin . .
7 To highlight the paragra hthat the cursor is positioned Within on the text editor screen.
a To highlight all text on t e text editor screen.
Press out (Clear/Back) to end highlight mode and return to the text editor screen.
Selected text (a word, paragraph, or all text) that has been copied or cut may be pasted within the same text editor screen. a new
message, a new Email, or application description lieId (Scheduler, To Do, or Notepad). Follow the instructions provided in the previous
topic Text Paste.
5.3) CW!
51“) Out
53} Delete
é) Select word .
‘iy S etect pnmgra ph
e,- S e iect oil
When the highlight mode is turned
On, the Soft/rey i indicator displays
Off. When the highlight mode is
turned Off, the Soltkey 1 indicator
displays On. Use smflray 1 to
toggle highlight mode Oil/Off
Text Object
The Insert object menu provides a list of canned text items, sounds, animations, pictures , and emoticons that may be added to the text
editor screen. Canned text may be created and saved to add to the text editor screen.
At the text editor screen:
if Position the cursor at the location to add an object.
Press MENU (Options Menu) and Ii to display the Insert object menu. Input the corresponding number:
1 To display the Add Quick text screen with a list of canned text.
2 To display the Sound list screen.
3 To display the Picture'Files screen,
4 To display the Animations screen.
5 To display the Emoticons screen.
it To display the Pictograph screen.
Use the navigation keys to highlight the desired object in the list,
Press Snflkey 1 (Preview to view the object. Pressan (Clear/Back) orSoflkey 2 (Stop/Cancel) end viewing and return to
the previous list screen. ( ee Flag.) [7] Cannolpreview Emoticons,
With the object highlighted in the list screen, press 0 (Select) to return to the text editor screen and the oblect is inserted.
In the Preview screen lor sounds, pictures, animations, and pictographs, press‘G (Select) osmkeyl (Insert) to return to the
text editor screen and the obiect is inserted.
At the Emoticon screen, use the navigation keys to highlight the desired object and press”; (Select) osmkeyt (0K) to
return to the text editor screen and the emoticon is inserted.
Canned text provides a list of items to be added to the Add Quick Text list. The Quick Text menu provides options to add new canned
text items, edit and delete existing canned text items, and restore the list to the original delault canned text list.
To add, edit, delete or restore canned text, begin at the text editor screen and:
D Press MENU (Options Menu), 5, and 1 to display the Add Quick Text list screen.
Highlight the canned text item to edit or delete,
Press MEllll (Options Menu) to display the Quick Text menu.
lnput1 to displa the Create Quick Text screen or2 to displ _v the Edit Quick Text screen. PressSoflkey 1 (Mode) to select the
text ent mode (ABC, 123, or T96 and input the text. Pressi} Select/Save) to save the entry and return to the Add Quick Text
screen. ress Softkey 2 (Cance to cancel the add or edit an return to the Quick Text menu.
lnput3 to delete and a decision screen displays, “Delete selected text message?" PresSoflkey 1 (Delete) to confirm the
deletion or press Soflkey 2 (Cancel) to cancel the deletion.
Input 4 to restore and _a screen displays,l“Restore deladlts: Thiswill destroy your personal text messagesl” PresSoflke 1
(OK) to confirm restoring to the deiau t list and a bus screen dis lays, “Please wait while default text messages are res cred..."
coniirmation screen displays, “Default text restore PressSo key 2 (Cancel) to cancel restoring the default list,
y Canned?
3; Sound
3; Picture...
s Animation...
53 Emoticon".
as P “a: on ..
T9 Text Language
n- Press MENU (Options Menu) and 1 to display the T9 language screen. m i“ at 53 TX;
Input the number or use the navigation keys to highlight the preferred language and pressC! (Select) to return to the text editor , ' g ' '
screen tesEnghs
@ Francois
Text Edit Settings it Espcfiol
U“ Press MEIIIJ (Options Menu) ands to display the Edit Settings screen.
gste the navigation keys to highlight the type oi write mode and clear mode ol text entry and pressO (Select) to select the radi
U on.
Press Soflkey 1 (0K) to save the settings and return to the text editor screen.
‘Cleqr'tvlede
"‘ Entokspnce
J Delete
OK | Wt
Messaging and Voice Mail
(TBD)
eb Browser
(T 5D)
P on 00K
To access Phonebook option 0! the main menu:
(TBD)
(T BD)
(TBD)
. pplications
(TBD)
F” To purchase NEC Authentic
Authorized Accessories Accessories“, please contact the
. . . M i . . A NEC customer Care Center at
NEC recommends usrng only NEC Authentic Accessories With your Wireless phone lo ensure optimum quality performance. (See 1-800-637-5977 in the United
Flags and Warnings.) The NEC authorized accessories include the lollowmg: States.
Vehicle Power Adapter AC Adapter and Charger Unil , ‘
(Part Number 155-0546) (Part Number 155. 0541) Ffl Looklor the NEC Authentic
Accessories“ logo to know it the
/ item has been approved by NEC for
use with the 525,
mu;
Hands-tree Headset USB Synchronization Cable
(Part Number 155-0543Y (Pan Number 204-0433)
on
W Not using NEC Authentic
Accessoriesm or not using NED
approved accessories may void
your phone ‘s warranty.
i“? WARNING! The power cords of
Battery this product contain lead, a
(pan Number 155.0542y chemical Imown to the State of
California to cause birth
defects or other reproductive
harm. Wash hands after
handling.
* These accessories are purchased and included in the wireless phone package
Battery
Refer to Battery Care and Disposal (see page 13) and Preparing the Battery (see page 17) tor information the proper care, disposal, and
charging the battery tor use.
AC Adapter and Charger‘Uni‘t
“L“? CAUTION: POSSIBLE SHOCK HAZARD!
Do not touch the AC adapter main unit, the AC cord, or electrical outlet with wet hands.
Do not connect a charger or any other eternal DC source it the phone’s battery is not inserted.
Do not pull the AC cord when removing it from the electrical outlet.
Use the correct voltage range. The AC adapter is 1ODV-240V,
Do not leave the AC adapter plugged in when not in use.
Hands-tree Headset
The foam covered ear piece (see picture is placed withing your ear. Do not put any other part of the headset in your ear.
Attach the clip near the neckline of your clothing so that the microphone is near your mouth. Do not attach the clip to any part of your
body.
The hands tree microphone is on one side with 0n/Ott switch on the opposite side as shown in the picture. Press the round button to
answer/connect a call. When the conversation is over, press the round button to disconnect the call,
Vehicte Power Adapter
Connect the vehicle power adapter with the power adapter inserted into the cigarette lighter or vehicle power outlet. Do not insen the
end oi the cable that attaches to the 525 wireless phone into the vehicle power outlet.
USB Connector Cable
Connect the USB PC Link cable according to the picture on the right,
The 525 plug end has release clips (see picture). Squeeze the release clips and insen into the 525 adapter port. When in
plug, be sure that the rectangular opening on the connector is lined up with the rectangular opening in the phone, The pl ,
easily into the phone. DO NOT FORCE THE PLUG! When removing the plug from the phone, squeeze both release clips and gently pull
straight out. The computer end is a standard USB connection.
MU.S. FDA’s Consumer Update
The Food and Drug Administration’s (FDA) Center for Devices and Radiological Health Consumer Update on Wireless Phones,
1.
2. What is FDA's role concerning the satety of wireless phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as wireless phones before they can
be sold, as it does with new drugs or medical devices. However, the agency has authority to take action it wireless phones are
shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the
manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard
no longer exists.
Although the existing scientific data does not justify FDA regulatory actions at this time, FDA has urged the mobile phone industry
to take a number of steps, including the following:
0 Support needed research into possible biological effects of RF of the type emitted by mobile phones;
0 Design mobile phones in a way that minimizes any RF exposure to the user that is not necessary [or device function; and
0 Cooperate in providing wireless phone users with the best possible information on what is known about possible effects of
wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have responsibility for dilterent aspects of mobile phone
safety to ensure coordinated efforts at the tedeml level. These following agencies that belong to this working group are:
0 National institute for Occupational Safety and Health
0 Environmental Protection Agency
0 Federal Communications Commission (FCC)
0 Occupational Safety and Health Administration (OSHA)
0 National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health
agencies for safety questions about wireless phones.
FDA Consumer Update
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no
proof, however. that wireless phones are absolutely sate. Wireless phones emit low levels of radio frequency energy (RF) in the
microwave range while being used. They also emit very low levels of RF when in the idle mode, Whereas high levels of RF can
produce health effects (by heating tissue), exposure to low level RF that does not produce heating eflects causes no known
adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have
suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.
FDA Consumer Update
100 also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power
t an do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of
times lower than those they can get lrorn wireless phones. Base stations are, thus, not the subject of the safety questions
discussed herein.
3. What kinds of phones are subject of this update?
he term "wireless phone" refers here to hand-held wireless phones with built-in antennas, often called "cell, mobile," or
‘PCS" phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the
hon distance between the phone and the user's head. These RF exposures are limited by Federal Communications Commission
atety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is
ocated at greater distances from the user, the exposure to RF is drastically lower because a person’s RF exposure decreases
rapidly with increasing distance from the source. The so-called "cordless phones," which have a base unit connected to the
elephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety
imits.
4. What are the results of the research done already/i
he research done thus far has produced conflicting results, and many studies have suffered from flaw in their research methods.
Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of wireless phones have
yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that
ow levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed
increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as
to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to therefore for up to 22
hours per day. These conditions are not similar to the condition under which people use wireless phones, so we don't know with
certainty what the results of such studies mean for human health.
unv-
hree large epidemiology studies have been published since December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumor of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful
health effects from wireless phone RF exposures. However, none of the studies can answer questions about long»term exposures,
since the average period of phone use in these studies was around three years.
FDA Consumer Update
FDA Cons mgr Update
5.
What research is needed to decide whether RF exposure from wireless phones poses a health risk?
A combination oi laboratory studies and epidemiological studies of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could be completed in a few years, However, very large numbers of
animals would be needed to provide reliable proof of a cancer promoting effect, if one exists. Epidemiological studies can provide
data that is directly applicable to human populations, but to or more years” follow-up may be needed to provide answers about
some health effects, such as cancer. This is because to interval between the time of exposure to a cancer-causing agent and the
time tumors develop - it they do - may be many years, The interpretation of epidemiological studies is hampered by difficulties in
measuring actual RF exposure during dat»to-day use of wireless phones. Many factors affect this measurement, such as the angle
at which the phone is held, or which model oi phone is used.
What is FDA doing to find out more about the possible health effects of wireless phone RF?
FDA is working with the US. National Toxicology Program and with groups 01 investigators around the world to ensure that high
priority animal studies are conducted to address important questions about the effect of exposure to radio lrequency energy (RF),
FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Protect since its
inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has
driven the establishment of new research programs around the world. The Project has also helped develop a series ol public
intorrnation documents on EMF issues.
FDA and the Cellular Telecommunications and Internet Association (CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input lrom experts
in government. industry, and academic organizations. CTlA-funded research is conducted through contracts to independent
investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also
include abroad assessment 01 additional research needs in the context oi the latest research development around the world.
How can I find out how much radio frequency energy exposure I can get by using my wireless phone?
All phones sold in the United States must comply with Federal Communications Commission (FCC) guidelines in consultation
with FDA and the other federal health and safety agencies. The FCC limit for RF exposure from wireless phones is set at a Specific
Absorption Rafe (SAR) of 1 ,6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed by
the Institute of Electrical and Electronic Engineering (IEEE) and the National Council on Radiation Protection and Measurement.
The exposure limit takes into consideration the body's ability to remove heat from the tissues that absorb energy from the wireless
phone and is set well below levels known to have effects.
Manufacturers of wireless phones must report the RF exposure level tor each model of phone to the FCC. The FCC website
(http://www.fcc.gov/oet/rtsatety) give directions for locating the FCC identification number on your phone so you can find your
phone’s RF exposure level in the online listing.
FDA Consumer Update
FDA Cons ate
8. What has the FDA done to measure the radio frequency energy coming irom wireless phones?
The Institute oi Electrical and E ectronic Engineers (lEEE) is developing a technical standard for measuring the radio frequency
energy (RF) exposure from wire ess phones and other wireless handsets with the participation and leadership of FDA scientists
and engineers. The standard, “Recommended Practice for Determining the Spatial-Peak Specilic Absorption Rate (SAR) in the
Human Body Due to Wireless Communications Devices: Experimental Techniques," sets forth the first consistent test methodolog
for measuring the rate at which RF is deposited in the heads oi wireless phone users The test method uses a tissue-simulating
model of the human head. Standardized SAR test methodology is expected to greatly improve the consistency oi measurements
made at different laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by
the whole body or a small part of the body, it is measured in watts/kg (or milliwattts/g) oi matter. This measurement is used to
determine whether a wireless ptone complies with safety guidelines.
9. What steps can I take to reduce my exposure to radio irequency energy from my wireless phones?
If there is a risk from these pro ucts--and at this point we do not know there is--it is probably very small. But if you are concerned
about avoiding even potential risks, you can take a iew simple steps to minimize your exposure to radio frequency energy (RF).
Since time is a key factor in how much exposure a person receives, reducing the amount oi time spent using a wireless phone will
reduce RF exposure.
0 If you must conduct extende conversations by wireless phone every day, you could place more distance between your body
and the source of the RF, since the exposure level drops oft dramatically with distance. For example, you could use a headset
and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.
Again, the scientific data does not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure
irom these products, you can use measure like those described above to reduce your RF exposure from wireless phone use.
10. What about children using wire ess phones?
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take
steps to lower exposure to radio frequency energy (RF), the measures described above would apply to children and teenagers
using wireless phones. Reducing the time of wireless phone use and increasing the distance between the userand the RF source
will reduce RF exposure.
Some groups sponsored by other national governments have advised that children be discouraged irom using wireless phones at
all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December
2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that
any health hazard exists.
FDA Consumer Update
FDA Cons mgr Update
11.
12.
FDA Consumer Update
What about wireless phone interference with medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic devices For this reason, FDA helped develop
a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators lrom
wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement ot Medical
Instrumentation (Am!) The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was
completed in late 2000, This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from
wireless phone EMI,
The FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance
requirements tor hearing aids and wireless phones so that no interierence occurs when a person uses a “compatible" phone and a
"compatible” hearing aid at the same time. This standard was approved by the IEEE in 2000.
The FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmiul
interference be found to occur, the FDA will conduct testing to assess the interference and work to resolve the problems
Where can I find additional information?
0 FDA webpage on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
0 Federal Communications Commission (FCC) RF Satety Program
(http://www.fcc.gov/oet/rtsafety)
0 International Commission on Non-ionizing Radiation Protection
(http://www.icnirp.de)
0 World health Organization (WHO) International EMF Project
(http://www.who.int/emi)
0 National Radiological Protection Board (UK)
(httpt/lwwwnrpbiorgiukl)
arranty and Service
Limited Warranty
1. What products may be covered by this limited warranty? _ . .
The following products (the “Products" or the “Product") purchased through an NEC America, Inc. (NECAM) Authorized Dealer (the “Dealer") in the Ued States on or after April 1,
2003 maybe covered by this warranty:
NEC 525 WIRELESS PHONE
2. What does this warranty cover?
NECAM warrants to the original end~user product purchaser (“You") that the Products will reasonably conform to the applicable published specitidahs in ettect at the time ol
shipment trom NECAM to the Dealer, and that the Products will be tree from detects in materials or workmanship that result in product lailure under noahuse during the warranty
period described in Paragraph 4.
3. When does your warranty begin?
The warranty period will begin on the date you purchase the product. Dated prool of purchase is necessary to accompany and product returned tor warraplservice consideration.
Valid proot of purchase must identity the point or purchase, date ol purchase, product model or trade name, and Electronic Serial Number.
4. How long does the coverage last?
The warranty period for the product is:
ONE (1) YEAR
Any products repaired or replaced under the terms of this warranty are covered under the warranty tor the remainder of the original warranty period oinety (90) days from the date oi
service return shipping, whichever is longer.
5. What will the manufacturer do it the product becomes delective in materials or workmanship during the warranty period?
If any product covered under this warranty becomes detective in materials or workmanship resulting in product lailure during the applicable warrariperiod, NECAM will, at its option,
either repair the detective product without charge tor parts and labor, or provide a replacement in exchange tor the detective Product.
6. What is not covered by this warranty/Z
(a) THIS WARRANTY DOES NOT EXTEND TO:
(i) Products which have been subjected to misuse, accident, physical damage, improper installation, abnormal operation or handling, neglect, indation, fire, water, or other
liquid intrusion, or;
(ii) Damage caused by computer viruses.
(iii) Products which have been damaged due to repair, altered, or modilied by anyone other than an AUTHORIZED service warranty component~level reprentative ot NECAM,
or;
(iv) Detects caused by components, pans, or accessories not compatible with the watmnted Product, or:
(y) Products whose warranty/quality labels, product serial number plates or electronic serial numbers have been removed, altered, or rendered idele, or;
(vi) Accessory items such as antenna, cables, curl cords, cases, etc., or;
(vii) Products shipped to NECAM for repair lrom outside the United States
(viii) Defects in appearance, cosmetic, decorative, or structural items including framing and nonoperative parts.
(b) ANY OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHAIJ. BE
LIMITED TO THE DURATION OF THIS WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS YOUR SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU.
(0) NECAM'S TOTAL LIABILITY FOR DAMAGES FOR ANY CAUSE RELATED TO OR ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, WHETHER IN CONTRACT.
NEGLIGENCE, STRICT TORT, OR BASED ON ANY OTHER LEGAL THEORY, SHALL NOT EXCEED THE ORIGINAL PRICE PAID FOR THE PRODUCT LESS A REASONABLE
AMOUNT FOR USAGE
(d) IN NO CASE SHALL NECAM BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF
CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL THEORY, SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF SAVINGS
OR REVENUES. INABILITY TO USE THE PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES OR
SERVICES, CLAIMS BY THIRD PARTIES OTHER THAN YOU, AND INJURY TO PROPERTY. THESE LIMITATIONS DO NOT APPLY TO CLAIMS FOR PERSONAL INJURY. SOME
STATES DO NOT ALLOW THE EXCLUSION OR UMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
(e) THE REMEDIES CONTAINED HEREIN ARE YOUR SOLE AND EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY.
7. How do you get warranty service?
It your product requires warranty service, it must be returned to a NECAM Distribution Center with shipping paid by You, along with a description ot tIteoduct mallunction or
difficulty. You are required to substantiate warranty status with a dated prool of purchase (as explained in item #3), with the IMEI (International Mite station Equipment Identity).
You may contact NECAM by calling (800) 637-5917 to obtain the address oi the nearest NECAM Distribution Center. NECAM assumes no risk for damage or lose transit.
ll, in NECAM's sole opinion, the Product lailure is not covered under this warranty, or proot of purchase does not meet the terms of this warranty, you tlibe notified and your
authorization will be requested for any further repair activity. Products repaired under warranty will be returned to you, transportation prepaith all other cases, you will be required to
pay return shipping costs.
8. How does state law apply to this warranty?
This warranty gives you specific legal rights, and you may also have other rights which vary lrorn state to state.
9. This warranty is the entire agreement.
Unless modltled in writing, signed by both You and NECAM, this warranty is understood to be the complete and exclusive agreement.
NEC Authorized Accessorf ‘
Limited Warranty
1. What products may be covered by this limited warranty!
The following products (the ”Products" or the “Product”) purchased through an NEC America, Inc. (NECAM) Authorized Dealer (the "Dealer") in the Ueil States on or alter April 1,
2003 may be covered by this warranty:
NEC AUTHORIZED WIRELESS TELEPHONE ACCESSORIES
2. What does this limited warranty cover?
NECAM warrants only to the original end-user Product purchaser (“You") that the Products will conlorm to the applicable published specifications infect at the time of shipment
trom NECAM to the Dealer, and that the Products will be free from defects in materials or workmanship under normal use and service during the warranty p’ed described in
Paragraph 4,
3. When does your limited warranty begin?
The warranty period begins on the date you purchase the Product. Dated prool oi purchase is necessary to accompany any Product returned for warranty pace consideration. Valid
proof of purchase must identity the point oi purchase, date of Product purchase, and the model or Product purchased. However, if such dated proof of puhase identifying the date or
Product purchase, and model of Product is not available, the warranty period begins on the date the Product is shipped from NECAM to the Dealer,
4. How long does the coverage last?
The warranty period for the Product is:
Ninety (90) Days
Any Products repaired or replaced under the terms or this warranty. are covered under the warranty for the remainder of the original wananty period.
5. What will NECAM do if the product becomes defective in materials or workmanship during the warranty period?
If any Product covered under this warranty becomes defective in materials or workmanship during the applicable warranty period, NECAM will, at its him, either repair the detective
Product without charge for parts and labor, or provide a replacement in exchange for the detective Product.
6. What is not covered by this warranty?
(3) THIS WARRANTY DOES NOT EXTEND TO:
(i) Products which have been subjected to misuse, abuse, accident, physical damage, improper installation, negligence in use, abnormal operation handling, neglect,
water or other liquid intrusion, improper temperature, humidity or other environmental condition, including but not limited to, lightening, inuadon or fire; or,
(ii) Products which have been repaired, altered or modilied by anyone other than Authorized Service Warranty Representative of NECAM; or,
(iii) Defects caused by equipment, components, pans or accessories not sold by NECAM or use of equipment, components, parts or accessories not compble with the
warranted product; or,
(iv) Products whose warranty/quality labels, or product serial number plates have been removed, altered, or rendered illegible; or,
(v) Products shipped to NECAM for repair lrom outside the United States.
(b) ANY OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE
DISCLAIMED OR LIMITED TO THE DURATION OF THIS WARRANTY. SOME STATES DO NOT ALLOW DISCLAIMERS OR LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU,
(0) NECAM'S TOTAL LIABILITY FOR DAMAGES FOR ANY CAUSE RELATED TO, OR ARISING OUT OF THE USE OR INABIUTY TO USE THE PRODUCT, WHETHER IN CONTRACT,
NEGLIGENCE, STRICT TORT, OR BASED ON ANY OTHER LEGAL THEORY, SHALL NOT EXCEED THE MANUFACTURER’S SUGGESTED RETAIL PRICE FOR THE PRODUCT.
(d) IN NO CASE SHALL NECAM BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF
CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL THEORY, SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF (SAVINGS
OR REVENUES, INABILITY TO USE THE PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES OR
SERVICES, CLAIMS BY THIRD PARTIES OTHER THAN YOU, AND INJURY TO PROPERTY. THESE LIMITATIONS DO NOT APPLY TO CLAIMS FOR PERSONAL INJURY. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
7. How do you get warranty service?
It your Product requires warranty service, it must be returned to a NECAM Distribution Center. at your expense, along with a description 01 the Produciialiunciion or difficulty. To
obtain the address of the nearest NECAM Distribution Center contact the Dealer from which you purchased the Product or NECAM. You may contact NECAM byalting (800)
637-5917 or at the following Internet web-site addresswwwnecwirelesscom/supportl, (Email address: support@necwireless.com). You are required to substantiate warranty status
with a dated proof oi purchase (as explained in item #3). NECAM assumes no risk ior any damage, loss or misdirection in transit at any kind.
It, in NECAM’s sole opinion, the Product failure is not covered under this warranty, you will be notilied and Your authorization will be requested lone iunher repair activity Products
repaired under warranty will returned to you, transportation prepaid, You must pay return shipping costs tor the Products repaired which are not com by warranty,
8. How does State law apply to this warranty?
This warranty gives you specific rights, and you may also have other rights, which vary irom state to state.
9, This warranty is the entire agreement.
Unless modified in writing, signed by both You and NECAM, this warranty in understood to be the complete and exclusive agreement between the partiewperseding all prior
agreements, oral or written and all other communication between the parties relating to the subject matter of this limited warranty. No agent, Dealer employee oi NECAM is
authorized to make modifications to this limited warranty and any such representations should not be relied upon,
NEC Customer Service Su ort
NEC Service Support can assist you with any additional inlormation that you may need in the operation your NEC cellular telephone and NEC Authentic Amoriesw. Contact NEC
Service Support at the tollowing (The 800 number listed provides access to NEC Repair Service and Parts Sales):
M1 Writing”: Emil: Mm;
1—800-637-5917 NEG America, Inc. support@necwireless.com wwwnecwirelesscom
Service Suppon
6555 N State Hwy 161
lrving, Texas 75039—2402
To locate the nearest retailer, contact Leno-2556664 or send an Email to: sales@necwireless.com.
*Send only written correspondence to the above address. Do not send the wireless phone or accessories to this address for repair or service,
Cellular Telecommunicatlons Industry Association D er Safety T' 5
Your wireless telephone gives you the powerlul ability to communicate by voice almost anywhere, anytime whenever wireless phone
service is available and safe conditions allow. However, an important responsibility accompanies the benefits of wireless phones, on
that every user must uphold.
When driving a car, driving is your first responsibility. If you find it necessary to use your wireless phone behind the wheel of a car,
practice good common sense and remember the following tips:
1. Get to know your wireless phone and its features such as speed giapng redial. If available, these features help you to place your
call without taking your attention oil the road.
2. When gvailgp e se a hands free dev'ge If possible, add an additional layer of convenience and safety to your wireless phone
with one of the many hands free accessories available today.
3. Position your wireless phone within easy reaeh Be able to access your wireless phone without removing your eyes from the
road. If you get an received call at an inconvenient time, if possible, let your voice mail answer it for you,
4. Let the person you are speak'pg with know you are driving it necessary, suspend the call in heavy traffic or hazardous weather
conditions: rain, sleet, snow, ice, and even heavy traffic can be hazardous,
Do not take notes or look up phone numbers while griv'ng Jotting down a “to do” list or flipping through your address book
takes attention away lrom your primary responsibility, driving safely.
6. Dial sensibly and assess the treffip- ‘f poss'p e place calls when you are not moving or before p I'pp ‘ptp natticTry to plan
calls when your car will be stationary, If you need to make a call while moving, dial only a few numbers, check the road and you
mirrors, and then continue
7. Do not engage in stressful or emptipna pppyersatiogs that may be distractingMake people you are talking with aware you are
driving and suspend conversations that have the potential to divert your attention irorn the road
8, Use your wireless phone to call for help Dial 94-1 or the local emergency number in the case of fire, traffic accident, or
medical emergency.‘
9. t §§ ye rw're esp phone to help others in emergenc‘es If you see an auto accident, crime in progress. or other serious
emergency where lives are in danger, call 9—1-1 or the local emergency number, as you would want others to do for you.
10, Call roadside assistanpe or a spep‘a gogemergency wirelese aes'stappe number when necesgryl. lyou see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor trallic accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other special non-emergency wireless numberf
Wherever wireless phone service is available
Check the laws and regulations on the use of wireless telephones and their accessories in the areas where you drive Always obey them
The use of these devices may be prohibited or restricted in certain areas
"The wireless industry reminds you to use your phone safely when driving." For more information, please call 1-888-901-SAFE, or visit
the Cellular Telecommunications Industry Association (CTIA) website, www.wow-com.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:07:30 19:46:39-03:00
Create Date                     : 2003:07:29 11:24:03-03:00
Creator                         : Acrobat 5.0 Scan Plug-in for Windows
Page Count                      : 29
Mod Date                        : 2003:07:30 19:46:39-03:00
Creation Date                   : 2003:07:29 11:24:03-03:00
Producer                        : Acrobat 5.0 Scan Plug-in for Windows
Metadata Date                   : 2003:07:30 19:46:39-03:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools