NEC of America KMP6J1T1 Single-Band PCS GSM Phone User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	468113
Application ID	sw9Zl63YRK0CXV1K/YtZOg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	136.02kB (1700228 bits)
Date Submitted	2004-09-13 00:00:00
Date Available	2004-10-25 00:00:00
Creation Date	2004-08-20 21:23:12
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2004-09-13 10:44:37
Document Title	Manual.book
Document Creator	FrameMaker 7.0
Document Author:	ichikawa

N401i_BT_v1.1_English_master
Software version: ADED0703_E04
Personalization: 04FRADED0701N401i_00.01
Radio Frequency (RF) Signals(900/1800MHz)
THIS NEC PHONE (MODEL N401i) COMPLIES WITH THE EU REQUIREMENTS FOR EXPOSURE
TO RADIO WAVES.
Your mobile phone is a radio transceiver, designed and manufactured not to exceed the SAR* limits** for
exposure to radio-frequency (RF) energy, which SAR* value , when tested for compliance against the
standard was (TBD)W/kg. While there may be differences between the SAR* levels of various phones and
at various positions, they all meet*** the EU requirements for RF exposure.
*The exposure standard for mobile phones employs a unit of measurement known as the Specific
Absorption Rate, or SAR.
**The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged over ten
grams of tissue, recommended by The Council of the European Union. The limit incorporates a substantial
margin of safety to give additional protection for the public and to account for any variations in
measurements.
*** Tests for SAR have been conducted using standard operating positions with the phone transmitting at its
highest certified power level in all tested frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while operating can be well below the maximum
value. This is because the phone is designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a base station antenna, the lower the power
output.
Radio Frequency (RF) Signals(1900MHz)
THIS NEC PHONE (MODEL N401i) COMPLIES WITH THE USA REQUIREMENTS FOR EXPOSURE
TO RADIO WAVES.
Your wireless phone contains a radio transmitter and receiver. Your NEC phone is designed and
manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the
Federal Communications Commission of the U. S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general population. The guidelines are based
on standards that were developed by independent scientific organizations through periodic and thorough
evaluation of scientific studies.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using
standard operating positions accepted by the FCC with the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value. This is because the
phone is designed to operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna, the lower the output.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it
does not exceed the limit established by the government- adopted requirement for safe exposure. The tests
are performed on position and locations (for example, at the ear and worn on the body) as required by FCC
for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at
the ear is (TBD) W/ kg, and when worn on the body, is (TBD) W/ kg. (Body- worn measurements differ
among phone models, depending upon available accessories and FCC requirements). While there may be
differences between the SAR levels of various phones and at various positions, they all meet the government
requirement.
* In the United States, the SAR limit for wireless mobile phones used by the public is 1.6 watts/ kg (W/ kg)
averaged over one gram of tissue. SAR values may vary depending upon national reporting requirements
and the network band.
Body- worn Operation
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is
on file with the FCC and can be found under the Display Grant section at http:// www. fcc. gov/ oet/ fccid
after search on FCC ID A98－KMP6J1T1.
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used
with a NEC accessory designated for this product or when used with an accessory that contains no metal and
that positions the handset a minimum of 1.5 cm from the body.
Emergency Services and
Emergency Services and Safety
Safety Precautions
Precautions
Emergency Services
To make an emergency call in any country
☛
Press 1 1 2
Ask the operator for the service which you require: Police,
Ambulance, Fire Brigade, Coastguard or Mountain Rescue
Services. Give your position and, if possible, remain
stationary to maintain phone contact.
The 112 emergency number service is available on every
digital network service. The number 999 is an alternative
emergency number for the UK only, and can only be used
with a valid SIM card.
2 Due to the nature of the cellular system, the
success of emergency calls cannot be
guaranteed.
General Care
A cellphone contains delicate electronic circuitry, magnets,
and battery systems. You should treat it with care and give
particular attention to the following points.
• Do not allow the phone or its accessories to come into
contact with liquid or moisture at any time.
• Do not place anything in the folded phone.
• Do not expose your phone to extreme high or low
temperatures.
• Do not expose your phone to naked flame, cigars or
cigarettes.
• Do not paint your phone.
• Do not drop or subject your phone to rough treatment.
• Do not place the phone alongside computer disks, credit
cards, travel cards and other magnetic media. The
information contained on disks or cards may be affected
by the phone.
• Do not leave the phone or the battery in places where the
temperature could exceed 60°C; e.g. on a car dashboard
or on a window sill, behind glass in direct sunlight, etc.
• Do not remove the phone’s battery while the phone is
switched on.
• Take care not to allow metal objects, such as coins or key
rings, to contact or short-circuit the battery terminals.
• Do not dispose of battery packs in a fire. Your phone's Liion batteries may be safely disposed of at Li-ion recycling
points. For more specific battery and power supply
information, see page 3.
• Do not put your phone's battery in your mouth as battery
electrolytes may be toxic if swallowed.
• Do not attempt to dismantle the phone or any of its
accessories.
• This equipment is fitted with an internal battery that can
only be replaced by a qualified service engineer. There is
a risk of explosion if the battery is replaced by an
incorrect type. Dispose of the used battery in accordance
with the manufacturer's instructions.
• Using any battery pack, AC adapter, Vehicle power
adapter (option) or Desktop charger (option) not
specified by the manufacturer for use with this phone
creates a potential safety hazard.
• The earpiece may become warm during normal use and
the unit itself may become warm during charging.
• Use a damp or anti-static cloth to clean the phone. Do
NOT use a dry cloth or electrostatically charged cloth. Do
not use chemical or abrasive cleaners as these could
damage the case.
• Remember to recycle: the cardboard packaging supplied
with this phone is ideal for recycling.
• Do not leave the battery pack empty or disconnected for
a long time, otherwise some data may be initialized.
• Your phone contains metal which may cause you an itch,
a rash or eczema depending on your constitution or
physical condition.
• Take care not to put your phone in the back pocket of
your trousers or skirt and then sit on it. Also, do not put
your phone at the bottom of bag where it may subject to
excessive weight or pressure.
Doing so may damage the LCD and camera lens and
cause them malfunction.
• Take care not to hold the Light too close to your or other
people’s eyes when the Light is lit.
• Do not aim or direct the InfraRed (IR) data port towards
your or other people’s eyes when using the IR data
exchange.
• The foam covers the earpiece of the headset. Do not put
any other part of the headset in your ears.
Aircraft Safety
• Switch off your phone and remove its battery when inside
or near aircraft. The use of cellphones in aircraft is illegal.
It may be dangerous to the operation of the aircraft and it
may disrupt the cellular network. Failure to observe this
instruction may lead to suspension or denial of cellphone
service to the offender, or legal action, or both.
• Do not use your phone on the ground without the
permission of the ground crew.
Hospital Safety
• Switch off your phone in areas where the use of
cellphones is prohibited. Follow the instructions given by
the respective medical facility regarding the use of
cellphones on their premises.
General Safety
• Observe ‘Turn off 2-way radio’ signs, such as those near
stores of fuel, chemicals or explosives.
• Do not allow children to play with the phone, charger or
batteries.
• Small parts are included in your phone. Keep them out of
reach of small children, for whom it could be a choking
hazard.
• The operation of some medical electronic devices, such
as hearing aids and pacemakers, may be affected if a
cellphone is used next to them. Observe any warning
signs and manufacturer's recommendations.
• If you have a weak heart, you should take extra
precautions when setting functions such as the Vibrator
and Ringer volume functions for incoming calls.
• If you set the Vibrator setting to anything other than OFF,
be careful that the phone is not near a source of heat
(e.g. a heater) and that it does not fall from a desk due to
the vibration.
Road Safety
• You MUST exercise proper control of your vehicle at all
times. Give full attention to driving.
• Observe all the recommendations contained in your local
traffic safety documentation.
• Pull off the road and park before making or answering a
call if driving conditions so require.
• You MUST NOT stop on the hard shoulder of a motorway
to answer or make a call, except in an emergency.
• Switch off your phone at a refuelling point, such as a
petrol station, even if you are not refuelling your own car.
• Do not store or carry flammable or explosive materials in
the same compartment where a radio transmitter, such
as a cellphone, is placed.
• Electronic vehicle systems, such as anti-lock brakes,
speed control and fuel injection systems are not normally
affected by radio transmissions. The manufacturer of
such equipment can advise if it is adequately shielded
from radio transmissions. If you suspect vehicle
problems caused by radio transmissions, consult your
dealer and do not switch on your phone until it has been
checked by qualified approved installers.
Vehicles Equipped with an Air Bag
An air bag inflates with great force. Do not place objects,
including either installed or portable
wireless equipment, in the area over the air bag or in the
air bag deployment area. If in-vehicle wireless equipment
is improperly installed and the air bag inflates, serious
injury could result.
Third Party Equipment
The use of third party equipment, cables or accessories,
not made or authorized by NEC, may invalidate the
warranty of your cellphone and also adversely affect the
phone’s operation. For example use only the NEC mains
cable supplied with the AC charger.
Service
The cellphone, batteries and charger contain no userserviceable parts. We recommend that your NEC
cellphone is serviced or repaired by an NEC authorized
service centre. Please contact your Service Provider or
NEC for advice.
Non-Ionizing Radiations
The radio equipment shall be connected to the antenna via
a non-radiating cable (e.g. coax).
The antenna shall be mounted in a position such that no
part of the human body will normally rest close to any part
of the antenna unless there is an intervening metallic
screen, for example, the metallic roof.
Use only an antenna that has been specifically designed
for your phone. Use of unauthorized antennas,
modifications or attachments could damage your phone
and may violate the appropriate regulations, causing loss
of performance and radio frequency (RF) energy above the
recommended limits.
Efficient Use
For optimum performance with minimum power
consumption, note the following:
• Your phone has the internal antenna. Do not cover part
of the internal antenna of the phone with your hands. This
affects call quality, may cause the phone to operate at a
higher power level than needed and may shorten talk and
standby times.
Radio Frequency Energy
Your phone is a low-power radio transmitter and receiver.
When it is turned on, it
intermittently receives and transmits radio frequency (RF)
energy (radio waves). The system that handles the call
controls the power level at which the phone transmits.
Exposure to Radio Frequency Energy
Your phone is designed not to exceed the limits for
exposure to RF energy set by national authorities and
international health agencies. * These limits are part of
comprehensive guidelines and establish permitted levels
of radio wave exposure for the general population. The
guidelines were developed by independent scientific
ii
organizations such as ICNIRP (International Commission
on Non-Ionizing Radiation Protection) through periodic and
thorough evaluation of scientific studies. The limits include
a substantial safety margin designed to assure the safety
of all persons, regardless of age and health, and to account
for any variations in measurements.
*Examples of radio frequency exposure guidelines and
standards that your phone is designed to conform to:
• ICNIRP, “Guidelines for limiting exposure to time-varying
electric, magnetic, and electromagnetic fields (up to 300
G Hz)-International Commission on Non-Ionizing
Radiation Protection (ICNIRP)”.
Health Physics, vol. 74. pp, 494-522, April 1998.
• 99/519/EC Council Recommendation on the limitation of
exposure to the general public toelectromagnetic fields
0 Hz-300 GHz, Official Journal of the European
Communities, July 12,1999.
• ANSI/IEEE C95.1-1992. “Safety levels with respect to
human exposure to radio frequencyelectromagnetic
fields, 3kHz to 300 GHz”. The Institute of Electrical and
Electronics Engineers Inc., New York, 1991.
• FCC Report and Order, ET Docket 93-62, FCC 96-326,
Federal Communications Commission (FCC), August
1996.
• Radio communications (Electromagnetic Radiation
Human Exposure) Standard 1999, Australian
Communications Authority (ACA), May 1999.
Declaration of Conformity
• This product complies with the requirements of the
R&TTE Directive 1999/5/EC. The ‘Declaration of
Conformity’ leaflet can be found within this box.
License
• T9® Text Input and the T9 logo are registered trademarks
of Tegic Communication.
“T9 Text Input is licensed under one or more of the
following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,
5,945,928, 6,011,554, and 6,307,548; Australian Pat.
No. 727539; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No. 2238414B; Hong Kong Standard Pat.
No. HK0940329; Republic of Singapore Pat. No. 51383;
Euro. Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR,
IT, NL, PT. ES, SE, GB; Republic of Korea Pat. Nos.
KR201211B1 and KR226206B1; and additional patents
are pending worldwide”
• USE OF THIS PRODUCT IN ANY MANNER THAT
COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS
PROHIBITED, EXCEPT FOR USE DIRECTLY
RELATED TO (A) DATA OR INFORMATION ENCODED
BY A CONSUMER FOR PERSONAL AND NONCOMMERCIAL USE WITHOUT REMUNERATION; (B)
DATA OR INFORMATION (i) GENERATED BY AND
OBTAINED WITHOUT CHARGE FROM A CONSUMER
NOT THEREBY ENGAGED IN A BUSINESS
ENTERPRISE, AND (ii) FOR PERSONAL USE ONLY;
AND (C) OTHER USES SPECIFICALLY AND
SEPARATELY LICENSED BY MPEG LA, L.L.C.
• Helvetica is a registered Trademark of Heidelberger
Druckmaschinen AG which may be registered in certain
jurisdictions.
• ©2002 Music Airport Inc., http://www.music-airport.com/
• Java and all Java-based trademarks and logos are
trademarks or registered trademarks of Sun
Microsystems, Inc in the U.S. and other countries.
• This product contains ACCESS Co., LTD’s Compact
NetFront™ Plus internet browser software.
Copyright © 1998-2004 ACCESS CO., LTD.
Compact NetFront™ is a registered trademark or
trademark of ACCESS CO., LTD in Japan and selected
countries worldwide.
• This product contains ACCESS CO., LTD’s JV-Lite2™
Java virtual machine software.
Copyright © 2000-2004 ACCESS CO., LTD.
JV-Lite2™ is a registered trade mark or trademark of
ACCESS COl, LTD, in Japan and selected countries
world wide.
• This product contains ACCESS CO., LTD's IrFront®
Infrared communication software.
Copyright ©1996-2004 ACCESS CO.,LTD.
• i-mode and i-mode logos are trademarks or registered
trademarks of NTT DoCoMo.
For the purpose of improvement, the specifications for
this product and its accessories are subject to complete
or partial change without prior notice.
Before You Start
User’s manual conventions
The instructions in this user’s manual make use of the shortcuts selection except special cases.
The following markers are used throughout the user’s manual to attract your attention:
/ This type of paragraph will contain details of where to find information related to the topic in question.
2 This type of paragraph will contain information worth noting.
, This type of paragraph will contain important information.
☛ This type of description will contain procedures to operate your phone.
Menu shortcuts selection
The alternative shortcuts method of selection lets you jump straight to a menu or function without highlighting an icon and scrolling through the
intermediate menu options. The selection are made by pressing numbers on the keypad which relate to the displayed menu options.
2 The instructions in this user’s manual make use of the shortcuts selection, except in special cases.
Reading the titles
Some titles in this manual contain information on how to access the functions. In these titles, M stands for
, the numbers indicate the menu shortcut
numbers (see “Overview of menu function” on page ix for details) and ... (three periods) indicate that there are more operations described in the
paragraph.
Reading the procedures
▼
▼
“Highlight” means to use the four way navigation keys (▲▼
) to move the area emphasized with different colouring.
“Select” means to highlight an item and then press .
Procedures are written omitting the verb “press”, except in some special cases.
For example,
1 2 means to:
☛
☛
Start from the standby screen ➔ Press
to display the Main menu screen
Press 1 to display the Phone screen ➔ Press 2 to display the Phone modes screen
Simple procedures are connected by arrows (➔).
Check box/Radio button
A check box enables/disables an option out of a set of options, and multiple check boxes can be selected at the same time. On the other hand, selecting
a radio button automatically cancels the previous selection, so only one radio button can be selected at one time.
A check box/radio button option can be selected/cancelled by highlighting it and pressing .
iii
Display information
Status bar area
This area contains the
automatically displayed
and the manually created
desktop icons. They
provide shortcuts to
certain items/functions.
This area contains icons which
indicate the battery strength, new
SMS/MMS message(s), signal
strength, etc. (see page vii).
On screens other than the
standby screen, the clock display
is placed in this area.
Help area
Shortcut number
This area contains help
information appropriate
for the current screen
(e.g. key presses
remaining when
composing a message).
Softkey area
This area contains context sensitive descriptions of the
Softkeys’ functions appropriate for the current screen.
Menu title
Press the appropriate number to
jump straight to a next menu. The
row colour is changed when selected
(e.g. to activate/deactivate a facility).
Help icons
Displayed when you can use the key
represented by these icons (see page vii).
Shortcut menu
number
The current menu
number is displayed.
Page scroll bar
Displayed when
you can press ▼
to scroll to the next
page.
Next menu icon
Displayed when you can press or the
shortcut number to show the next menu.
▼
Desktop icon area
, The Liquid Crystal Displays (LCD) on your phone are manufactured using high-precision technology. Even so, the LCD may contain pixels
(dots) that fail to light or that remain permanently lit. Note that this is normal and does not indicate a problem with your display.
iv
Parts and functions
Speaker
Earpiece
2nd-LCD
Main-LCD
LED & light
Camera
Side up key
Side down key
4 way navigation key
(▲▼
▲
▲
Through-hole
for straps
Softkey1(SK1)
Menu (
) key
Send (
) key
Internal antenna
Select key ( )
Softkey2(SK2)
Phonebook (
)key
Clear (CLR)/Back key
End/on-off (
Earphone
jack cover
Rear cover
for battery
) key
IR port
Alphanumeric keys
Mouthpiece
Charger connector cover
Keypad shortcuts
The following operations are available from the standby screen.
Key
Operation that involves pressing a key
Operation that involves pressing and holding a key
See page
20
SK1
Accessing the Mail screen
40
Accessing the Inbox screen
41
SK2
Accessing the i-mode menu screen
37
Accessing the Java™ applications screen
64
Accessing the Phonebook list screen
46
Accessing the Message screen
27
21
Setting the phone to Meeting mode/Returning to the previous
mode
21
▲
Accessing the Phone modes screen
▼
Accessing the My data screen
59
Accessing the voice recall
Accessing the received calls list
10
Accessing the received calls list
10
▼
Setting/Cancelling the Side key lock
▼
ix
Accessing the missed calls list
10
Accessing the missed calls list
10
Accessing the dialled calls list
10
Accessing the dialled calls list
10
Highlighting a desktop icon
18
Accessing the homepage
39
Ending a call or returning to the standby screen
–
Powering off
Deletes all the automatically displayed desktop icons
18
CLR
Deleting character or returning to the previous screen
–
Deleting all characters when you enter text
–
Entering phone numbers
Calling the Voice mail centre
53
2 to 9
Entering phone numbers
Going to the corresponding phone number in the phonebook(SIM) (One-touch dial)
Entering phone numbers
Entering + when you make an international call
12
Entering #
Entering a pause
–
Entering
Switching the ALS line 1/2 (if the SIM card supports ALS)
20
Accessing the volume control screen when your phone is open
(Use ▲ ▼, Side keys or 0 to 9 keys to adjust the volume.)
20
Accessing the camera view finder screen
54
Activating the ring silencer function when you receive a call
20
Turning on the light
(To turn it off, press any key or open/close your phone.)
–
Side up
Accessing the volume control screen when your phone is open
Side down (Use ▲ ▼, Side keys or 0 to 9 keys to adjust the volume.)
Activating the ring silencer function when you receive a call
vi
See page
Accessing the Main menu screen
20
20
LCD and displayed icons
Main-LCD
See “Desktop icons” on page 18 for details.
3 4 5 6
7 8
Indicates that the memory for mail/MMS is full.
12
Indicates the call diversion is set.
(red, green/red, green)
Indicates that new voice mail messages are on the
network (No ALS/ALS Line 1/2).
10
Indicates the Meeting mode, Pocket mode, Car
mode.
2 No icon appears for the Normal mode.
Indicates secured communication on SSL.
15
16
17
(gray)
Indicates that the phone is in the GSM (Global
System for Mobile communication) network service
area and GPRS is active.
(yellow)
Indicates that the GPRS is available and i-mode is
active.
12
13
14
Indicates the battery level.
(red, green, blue)
Indicates the battery charging status(fast, slow,
pause).
Indicates that the i-mode connection is carried out.
Indicates the IR modem is set to on, the auto start of
a Java™ application has failed.
Date
13
14 Day of week
15 Remote time
16 Local time
17
Indicates that you can use the options menu by
pressing
Indicates that the i-mode lock is on.
2 No icon appears when the phone is outside
Indicates that there is a new message(s) in your phone.
the GSM network service area, or when
the phone is in the GSM network service
area and GPRS is not attached.
Indicates that there is a new message(s) on the network.
Indicates that the SIM memory is full.
Indicates alarm-on, sound-off, vibrator-on, soundoff/vibrator-on.
Indicates that GPRS is active for purposes other
than i-mode connections.
11
Indicates that the Inbox in your phone is full.
(pink)
Indicates that there is (are) a mail/MMS/both mail
and MMS on the server.
(orange)
Indicates that there is a new mail/MMS in your
phone.
2 This orange icon blinks while a mail/MMS
is being downloaded
Indicates that you can use the phonebook list by
pressing .
Indicates the line status (ALS line 1/2 no ALS).The
icon with
displayed in red indicates that the
ALS line 1or 2 is unencrypted/no ALS.
Indicates the usable keys in black, while a Java™
application is in operation.
Indicates that the help display is available when
using SIM toolkit
Indicates the signal strength level.
10
Appears when you are outside the service area.
Network name (indicated in orange when using
roaming service)
11 Desktop icons

Indicates single/burst mode (camera).
vii
2nd-LCD
Indicates the video mode is on or the video is
recording.
4 5
Indicates that the phone is in the Car mode.
No icon appears for the Normal mode.
Indicates the signal strength level.
Indicates that the self timer is on.
Indicates the quality of the picture (super fine, fine,
normal, economy or super economy).
Indicates the quality of the video.
Indicates the photo/video screen size.
Indicates the battery level.
(red, green, blue)
Indicates the battery charging status (fast, slow,
pause).
Appears when you are outside the service area.

Indicates that there is a new message(s) in your phone.
11
Indicates that there is a new message(s) on the network.
Indicates the shooting environment.
Indicates that the SIM memory is full.
Indicates the brightness setting. The “+2” setting is
the brightest.
Indicates the zoom level.

Indicates the video mode is on, the video is playing,
on pause, fast forwarding, or rewinding.
Indicates the track information of the video (the video
file only, the video and audio file, or the audio file
only).
Indicates the video is played in normal/enlarged
screen size.
Displays the current volume level. The 0 is mute and
9 is the maximum.
viii
Indicates that the Inbox in your phone is full.
(pink)
Indicates that there is (are) a mail/MMS/both mail
and MMS on the server.
(orange)
Indicates that there is a new mail/MMS in your
phone.
Indicates that the memory for a mail/MMS is full.
(red, green/red, green)
Indicates that a new voice mail message is on the
network (No ALS/ALS Line 1/2).
2 The left image is when the phone is folded,
and the right image is when the phone is
open.
Indicates single or burst mode of the camera.
(blue)
Indicates that the video mode.
(red)
Indicates the video is recording.
10
Indicates that the self timer is on.
11
Indicates the photo/video screen size.
Indicates that the alarm is set.
Indicates that the vibrator is set.
Indicates that the phone is in the Meeting mode.
Indicates that the phone is in the Pocket mode.
10
12
12
Indicates the battery level.
Overview of menu function
Standby screen
Main menu screen
➡ ➡
▼
▼
The Main menu has a set of icons for its top levels of options (examples of the top level are shown right)
) and
(menu
which can be selected either using a combination of the 4-way navigation key (▲ ▼
selection), or just the keypad (shortcuts selection).
2 The title of the selected option will be displayed in the Help area.
2 SIM toolkit icon is displayed only when your SIM card supports this function.
2 With the Main menu screen displayed, press 0 to display your own number.
➡ ➡
CLR
or
Softkey 2
Key
Main menu
Settings
Message
Second level menu
Phone
Phone modes
Main-LCD
2nd-LCD
Power saving
Calls
Security
Network
Reset settings
Inbox
Drafts
Outbox
Sent
Folder1
Folder2
CB
Key
Main menu
i-mode
Phonebook
Camera
My data
Second level menu
i-mode
Settings
Lists
Information #
Call options
Camera
Video recorder
Pictures
Videos
Music
Sounds
Key
Main menu
Java
Accessory
SIM toolkit
Second level menu
Programs
Prog backlight
Music player
Calculator
Clock alarm
Scheduler
ToDo list
Notepad
Voice memo
Currency
Infrared
ix
Getting Started
Basic Calls & Phone Use
Text Entry
14
IR Data Exchange
16
Desktop icons
18
Settings (M1)
20
Message (M2)
26
i-mode (M3)
32
Phonebook (M4)
46
Camera (M5)
54
My data (M6)
59
Java™ (M7)
64
Accessory (M8)
66
Index
75
Before You Start
iii
User’s manual conventions............................................. iii
Display information ......................................................... iv
Parts and functions .......................................................... v
LCD and displayed icons ............................................... vii
Overview of menu function ............................................. ix
Getting Started
Preparing the phone ........................................................1
Standby and talk times.....................................................3
Checking the battery ........................................................3
Low battery alarm ............................................................3
Other battery alarms ........................................................3
Attaching and Removing the Emblem..............................4
Start-up ............................................................................4
Basic Calls & Phone Use
Making basic calls............................................................5
Ending a call ....................................................................5
Receiving an incoming call ..............................................5
Unsuccessful calls ...........................................................6
Emergency calls...............................................................6
Last number redial ...........................................................6
One-touch dial..................................................................6
Fast dialling......................................................................7
Displaying your own phone number (M0/M416) ..............7
Voice recall ......................................................................7
Options menu (during a call)............................................7
Putting a call on hold........................................................8
Mute .................................................................................8
Transferring a call ............................................................8
Multi-party calls ................................................................ 8
Recording a call ............................................................... 9
Call options (M43)............................................................ 9
Call settings (M16) ......................................................... 11
International dialling codes ............................................ 12
Roaming......................................................................... 13
Text Entry
14
Mode change ................................................................. 14
T9® English text input .................................................... 14
Normal text input............................................................ 15
Numeric input................................................................. 15
Key allocations............................................................... 15
IR Data Exchange
16
Positioning of the phones............................................... 16
IR send........................................................................... 16
IR receive (M891) .......................................................... 17
IR modem (M892) .......................................................... 17
Desktop icons
18
Settings (M1)
20
Phone (M11) .................................................................. 20
Phone modes (M12) ...................................................... 21
Main-LCD (M13) ............................................................ 22
2nd-LCD (M14) .............................................................. 23
Power saving (M15) ....................................................... 23
Calls (M16)..................................................................... 23
Security (M17)................................................................ 24
Network (M18) ............................................................... 25
xi
Reset settings (M19)...................................................... 25
Message (M2)
26
Message overview ......................................................... 26
Reading a message (M21) ............................................ 27
Creating a message....................................................... 30
Cell broadcast (M27) ..................................................... 32
i-mode (M3)
32
i-mode operation guide .................................................. 32
i-mode screen ................................................................ 37
i-mode menu screen ...................................................... 37
iMenu screen ................................................................. 39
Mail screen .................................................................... 40
i-mode glossary ............................................................. 45
Phonebook (M4)
46
Phonebook types ........................................................... 46
Accessing your phonebook (M4) ................................... 47
Phonebook list Options menu........................................ 48
Personal data Options menu ......................................... 52
Scratchpad number ....................................................... 53
Voice mail (M417).......................................................... 53
Camera (M5)
54
Notes on using the camera............................................ 54
Taking a picture (M51) ................................................... 55
Recording a video (M52) ............................................... 57
My data (M6)
59
Pictures (M61) ............................................................... 59
xii
Videos (M62) ................................................................. 60
Music (M63) ................................................................... 61
Sounds (M64) ................................................................ 61
File selector Options menu ............................................ 62
Java™ (M7)
64
Programs (M71)............................................................. 64
Prog backlight (M72)...................................................... 65
Accessory (M8)
66
Music player (M81) ........................................................ 66
Calculator (M82) ............................................................ 67
Clock alarm (M83) ......................................................... 67
Scheduler (M84) ............................................................ 68
ToDo list (M85) .............................................................. 70
Notepad (M86)............................................................... 71
Voice memo (M87) ........................................................ 72
Currency (M88).............................................................. 73
Infrared (M89) ................................................................ 74
Index
75
Getting Started
Preparing the phone
Before trying to use your phone, make sure that a valid Subscriber Identity Module (SIM) card is inserted and the battery is charged.
SIM card
Before using your phone, you must sign-up with one of the digital network service providers. In addition to your subscription details you will receive a
personal SIM (Subscriber Identity Module) card which is inserted into your phone.
If the SIM card is removed, the phone becomes unusable until a valid SIM card is fitted. It is possible to transfer your SIM card to another compatible
phone and resume your network subscription. The screen on your phone will display appropriate messages if no SIM card is fitted.
, If the phone, or the SIM card, is lost or stolen then you should contact your service provider immediately in order to bar it from use.
2 The phone supports a number of languages and the keyboard symbols have been chosen for world-wide operation.
2 The digital technology of your phone helps to ensure that your conversations are kept secure.
2 The SIM card contains personal data such as your electronic phonebook, messages (see “Message (M2)” on page 26) and also details of the network
services you have subscribed to. The phone will not work (except for emergency calls on some networks) unless a valid SIM card is fitted.
, Be sure to turn the phone off before inserting and removing a SIM card. Otherwise damage to the SIM card can occur.
Inserting a SIM card
, Be sure to turn the phone off before removing the battery pack.
☛ While pressing down the areas marked with
☛
☛
☛
☛
of the rear cover as indicated by arrows ➀, slide the rear cover about 3 mm in the direction of
arrows ➁ with your finger tips. Then, lift the cover up in the direction of arrow ➂ to remove it.
Lift the finger tab of the battery pack up in the direction of arrow ➃. Then lift the battery pack out in the direction of arrow ➄.
With the metal part facing down, insert the straight end of the SIM card under the holder in the direction of arrow ➅. Slide the SIM card all the way
until it reaches the end.
Align the
marks on the battery pack with the
marks on the phone. Insert it into the cavity in the phone body in the direction of arrow
➇, making sure that the tabs on the battery pack fit properly into the notches in the phone. Then, press the battery pack down in the direction of
arrow ➈ to clip it into the phone.
Make sure that the battery pack is securely attached to the phone and align the rear cover with the grooves on the phone so that there is a gap
of about 3 mm at the end of the cover. After making sure that there is no gap between the rear cover and the phone body, slide the rear cover in
the direction of arrows ➉ until you hear a click.
Notches
Finger tab
Battery
Rear cover
Holder
Tabs
About 3 mm
About 3 mm
SIM card
Check that there is no gap
between the rear cover
and the phone body.
, If the SIM card is not fully inserted when the battery is replaced, damage to the SIM card can occur.
/ If the SIM card is already fitted, see “Start-up” on page 4.
Removing a SIM card
☛ With the battery removed, push the short and straight end of the SIM card with your thumb to
slide it gently in the direction of arrow ➆ ➔ Lift the SIM card after it is completely removed from
the holder.
Charging the battery
Charger connector
Charger connector
Before trying to use your phone, insert the phone’s battery, connect the NEC battery charger (AC
cover
adapter) supplied with your phone to a suitable mains power socket.
☛ Pull open the charger connector cover gently.
, Be careful when handling the charger connector cover. Do not pull strongly.
Charger plug
☛ Connect the charger plug (AC adapter) into the charger connector at the bottom of the phone. If
your phone is turned on and charging starts, the battery icon will flash. LED will turn on in red
while charging. When charging is complete, the LED will turn off.
2 You are recommended to switch off the phone while charging. If you need to receive calls, your phone can be switched on and left in standby
while being charged, although the total time taken to charge is then increased.
The colour on the display shows the charging status of battery.
(red) Fast battery charging
(green) Slow battery charging while the phone is in use
(blue) Battery charging is stopped due to overheat
, Using any battery pack, AC adapter, vehicle power adapter (option) not specified by NEC for use with this phone can be dangerous and
may invalidate any warranty and approval given to the cellphone. Do not leave the charger connected to the mains supply when it is not
in use.
, Do not try to charge the battery if the ambient temperature is below 5°C (41°F) or above 35°C (95°F).
, DO NOT connect a charger or any other external DC source until the phone’s battery is inserted.
If the phone does not respond, please wait for a few minutes. The charging will then start.
If you use the phone while charging, handle the phone carefully since the cable or adapter is connected.
If you make/receive a call while charging, the charging may temporarily be interrupted.
Charging takes approximately 3 hours with your phone turned off.
, IMPORTANT BATTERY CHARGING INFORMATION
Charging a very low battery
The battery’s charge continues to drop after the low battery warning is displayed. In extreme cases where the battery is left uncharged for some
considerable time after this warning, a trickle charge is used to slowly top-up the battery to the safe level at which the fast charging can begin. The
phone can be in trickle charge for a few minutes before the fast charging starts.
, DO NOT connect a charger or any other external DC source if the phone’s battery is not inserted.
Standby and talk times
Your phone works closely with the network you are using to provide the services you need, and the standby and talk times achieved will depend on how
you use the phone and choices made by the network operator.
In particular, factors such as your location within the network, the frequency at which this location is updated, the type of SIM card you have, your
reception of area messages or cell broadcast messages and the use of full rate or enhanced full rate speech, will affect both standby and talk times.
Checking the battery
☛ Check icon at the top of the standby screen.
The block on the display shows the charge of your battery pack.
Full battery power
Partial battery power
Low battery power
Battery empty
Low battery alarm
When the battery voltage falls below the working level, a low battery warning is displayed on the screen accompanied by LED illumination and a short
tone along with an empty battery icon. The phone will automatically power down shortly afterwards.
2 Please charge the battery as much as possible when the battery is very low.
Other battery alarms
Your phone may display warnings when the battery temperature is too high, or the voltage of the battery or the charger is over the appropriate level.
Follow the instruction given by these warnings immediately, such as turning off the phone and removing the battery or charger.
Attaching and Removing the Emblem
Removing the emblem
Attaching the emblem
Depressions
Depressions
Attach the emblem, aligning the holes to
fit the 2nd-LCD, LED and camera.
Make sure the emblem is fitted over the square
depressions on each side of the phone.
Depressions
Depressions
Remove the emblem by hooking your finger tips
near the square depressions.
Start-up
Switching the phone on
☛ Hold down for about a second to switch on. The screen will display the selected greeting (see page 22) and the phone is then in standby.
2 You may need to charge the battery before using your phone.
2 When your phone is turned on, the specified ringer may sound.
2 If your phone is accidentally turned off while downloading or deleting Java™ application, it will take longer than usual to start up the phone the next
time you turn on the power.
Switching the phone off
☛ Hold down until the display shows the switch off message.
PIN code
The SIM card issued by your service provider has a security feature called PIN code protection. The Personal Identification Number (PIN) is a number
put on to the card by your service provider, and is 4 to 8 digits long. Some service providers supply SIM cards which will cause your phone to prompt for
a PIN code when it is turned on. If this is the case, enter your code with the phone’s keypad. If you insert a SIM card other than your own, information
such as call logs may be lost.
Basic Calls & Phone Use
Making basic calls
You make a simple call in the same way as you would with a normal phone, except that you need to press
after entering the area Subscriber Trunk
Dialling (STD) code and the phone number. To make international calls, you must first enter the international dialling code (see page 12).
2 Use the full STD area code even if you are calling to a person in the same town. If the numbers are too long to be displayed within one line, excess
part is deleted and ‘...’ is added at its end.
2 The main-LCD display shows the strength of the radio signal that links your phone to the network. The maximum signal strength is shown by 4 shaded
blocks and the minimum signal strength by 1 block.
Starting a call
☛ Key in the phone number. Check the number on the display ➔ to send the input number to start the call
☛ Before the other party answers the call, you can end the call by pressing briefly, pressing SK2 or folding your phone. When you use the headset,
you can also end the call by pressing or holding the button on it.
When the call is sent, the screen displays the number called or the name stored in the phonebook and a connection graphic or a Calling Line Identification
(CLI) picture that has been allocated to the number called (see page 45).
Correcting mistakes
and
to move the cursor and then press CLR to clear individual digits, or hold down CLR to completely clear a phone number.
▼
▼
Use the
Ending a call
☛ While talking, press
briefly or close your phone. The phone returns to the standby screen.
2 If is held down, your phone will turn off.
2 When you use the headset, you can also end a call by pressing or holding the button on it.
Receiving an incoming call
When someone calls your number, the ringer will play (if set - see page 21), the LED glows in the specified colour, and the phone number of the caller
may be displayed if the calling line identification facility is available and the caller has activated the feature. If the caller’s phone number has been related
and stored in your phonebook with a name and a CLI picture (see page 50), that name and picture will be displayed. If the caller has withheld their identity,
the screen will give a message that the caller’s number is being withheld.
2 You also have options for holding and forwarding calls. These options depend on your network and your subscription arrangements.
Accepting an incoming call
☛ While receiving an incoming call, press .
2 When you use the headset, you can also accept an incoming call by pressing the button on it.
Rejecting an incoming call
☛ While receiving an incoming call, press briefly or close your phone.
2 When you use the headset, you can also reject an incoming call by pressing and holding the button on it.
If your phone receives a call and you do not answer it, the screen will display the phone number (or the name if stored) of the caller (if available). This
information is stored in the missed calls list. Up to 10 missed calls are stored in this list.
2 You can set your phone to answer a call when any key is pressed (see “Any key answer” on page 20).
2 If you are making a call, the phone gives priority to receiving a call unless you have already pressed
/ See also: “Call diversion (M161)” on page 11 and “Call waiting and holding (M162)” on page 12.
/ See also: “Call options (M43)” on page 9.
Unsuccessful calls
If dialled call is not successfully connected, the display will give an appropriate message.
If your phone has the auto redial function activated, the number will be automatically called again after a short delay (see page 12).
Emergency calls
The standard emergency number of 112 can be used.
☛ Key in 1 1 2 ➔ to connect the call to the local emergency services.
2 On some networks, emergency calls can be made using the 112 number without a SIM card inserted.
Last number redial
You can redial the last number you called:
☛ Ensure that the standby screen is displayed and no phone number is shown ➔
twice to dial the last number you called.
/ See also: “Call options (M43)” on page 9.
One-touch dial
One-touch dial for the phonebook (SIM) is available by pressing and holding the number keys between 2 and 9.
2 A number for the One-touch dial corresponds to the location number in the phonebook (SIM).
2 One-touch dial is available only for the phone numbers with the location number 2 to 9 stored in the phonebook (SIM).
Fast dialling
Fast dialling is activated in Abbreviated Dialling Numbers (ADN) by entering a number 1 to 255 (depending on the SIM card),
Fast dialling is also activated by entering the location number 1 to 500 of your phonebook (Phone) and then and .
and
Displaying your own phone number (M0/M416)
☛
0 or
416
Voice recall
You can store up to 10 voice recall recordings which can be allocated to a personal data stored in the phonebook (Phone). To store the voice recall
sound, see page 50. To use the voice recall function, use the following procedure:
☛ Press and hold ▼
2 When you use the headset, you can also activate the voice recall function by pressing and holding the button on it from the standby screen.
2 Within 4 seconds, say the word or words you have recorded to identify the record you wish to recall. If the word or words were recognized, the
phonebook contents will be called automatically.
Options menu (during a call)
☛ During a call,
to display the options menu
No. Options menu (during a call)
Main menu
Displays the Main menu screen. See “Overview of menu function” on page ix for details.
Hold/Retrieve
Puts the highlighted call on hold or retrieves the call.
Mute/Unmute
Mutes or unmutes all active calls.
Transfer call
Enables to transfer the call and connect other parties.
2 After transferring the call, your call will be dropped.
Add to conference
Merges calls and makes a multi-party call.
Private call
Make a private call to the highlighted party within the multi-party call.
Record call
Records the call while talking.
No. Options menu (during a call) (Continued)
Disconnect party
Disconnects the highlighted party.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Putting a call on hold
☛ To put the received or dialled call on hold, SK1 or
2. To retrieve the call, SK1.
Mute
You can mute the sound from the mouthpiece during a call. When your call is muted, the other party cannot hear any sound from your phone, but you
can still hear the sound from the other party.
☛ To mute the sound during a call, press
3. To retrieve the sound, press
3 again.
2 The mute function is automatically released after the call ends.
Transferring a call
When you have an active call and a held call, you can transfer the call and connect the two parties, then you can drop from the line while leaving those
two calls active.
☛ To transfer the call,
4 or 4
2 After dropping from the call with the other two parties, if you have a call waiting, you can proceed the call with it.
Multi-party calls
If your SIM card is multi-party enabled, you can make a conference call to more than one caller. You can even leave the call while the remaining
participants carry on with the call.
Receiving the second call
☛ SK1 or to accept the second call ➔ SK2 or
5 to merge both calls.
2 When you accept the second call, the first call will be put on hold.
Making the second call
☛ SK1 to put the first call on hold ➔ Key in the phone number ➔ SK1 or
or
5 to merge both calls.
to make the second call ➔ After the second participant answers, SK2
Putting the multi-party calls on hold
☛ SK1 or
2 to put both the first and second calls on hold ➔ To retrieve the call, press SK1 or
2 again.
Making a private call
While on the multi-party call, you can make a private call to a specific party.
☛ Highlight the desired party you want to make a private call to ➔
6 ➔ To end the private call and return to the normal multi-party call,
5 or 2 .
2 While you are on a private call, other parties can continue with their conversation.
Ending the multi-party calls
☛ To end all calls, or SK2. To disconnect a specific party on a multi-party call, highlight the party you wish to disconnect ➔
, Multi-party call facilities are and network dependent.
Recording a call
You can record the conversation during the call.
☛ During a call, press and hold ▼ or
7 to start the recording ➔ To stop and save the recording,
playing voice memo or setting speaker” on page 73.
➔ To play the recording, see “Recording/
Call options (M43)
From Call options, you can display the list of missed, received and dialled calls, the duration of the last call made and all calls, charge information and
the redial blacklist
☛
4 3 to display the Call options screen.
No.
Call options
Missed calls
Displays the list of missed calls.
Received calls
Displays the list of received calls.
Dialled calls
Displays the list of dialled calls.
Last call duration
Displays the duration of the last call made on your phone.
☛ SK1 to reset the display to zero.
Total calls duration
Displays the duration of the total calls made on your phone.
☛ SK1 ➔ 1 to reset the duration of the total dialled calls, 2 to reset the duration of the total received calls,
or 3 to reset the duration of all calls.
▼
can also be used.
▼
can also be used.
can also be used.
No.
Call options (Continued)
Charge info
Redial blacklist
Displays the charge information (Advice of Charge - AOC).
, The AoC facility is SIM card and network dependent.
2 To reset the display to zero, set the maximum charges or edit the unit price, you may be prompted to
enter the PIN2 code.
Total charge
Displays the total charge.
☛ SK1 to reset the display to zero.
Maximum charge
Displays the maximum charge.
☛ Key in the maximum number of units allowed ➔ SK1
Unit price
Displays the unit price.
☛ Highlight the whole number (integer), the decimal number or the currency
field ➔ Key in the required value for the whole number and decimal
number fields. For the currency field, key in the currency type using a
maximum of three characters ➔ SK1
Accesses the numbers in the blacklist.
2 If dialled call is not successfully connected (e.g. number busy), the auto redial facility will be offered (see
page 12). If you have set auto redial and the call still fails, the number called will be added to the blacklist.
2 Depending on the conditions, some options may be displayed in gray and not be available.
▼
▼
Display missed/received/dialled calls Options menu (M431M/M432M/M433M)
☛ or
4 3 1 for missed calls, or
4 3 2 for received calls, or
or
4 3 3 for dialled calls.
☛ Highlight a number in the list ➔
No.
10
Missed calls/Received calls/Dialled calls Options menu
Call
Calls the current number.
Send
Creates a new SMS or MMS message to the highlighted phone number.
Add to phonebook
Adds the current number to the phonebook.
☛ 1 to add it as a new personal data, 2 to add it to an existing personal data ➔ Press the appropriate
number for the storage destination ➔ Press the appropriate number for the phonebook data field to
copy the current number to.
Delete one
Deletes the current number.
Delete all
Deletes all the numbers in the list.
No.
Missed calls/Received calls/Dialled calls Options menu (Continued)
Info
Displays information on the current number.
Add desktop icon
Creates a desktop icon of the selected number.
Items/Page
Selects either to display 4 or 8 phone numbers in one screen.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Call settings (M16)
From the Calls screen, you can change various call settings: the call diversion, call waiting and holding, auto redial and line identification.
Call diversion (M161)
Setting Call diversion
☛
1 6 1 ➔ Highlight the type of call you wish to divert
2 There will be a delay while your phone checks its divert status with your network.
☛ Highlight one of the conditions ➔ When the phone number field of a divert condition is highlighted, either enter the phone number to divert to, or
delete any existing phone number.
☛ If you have made any mistake, highlight the appropriate field ➔ SK1 to clear any mistakes
☛ If the settings are correct,
, There will be a short delay while the network sends the divert status of your phone.
, There may be an additional charge for this service depending on your network.
, There may be unavailable settings depending on your network.
Call diversion edit options menu
☛ Highlight the required edit field ➔
No.
Call diversion edit options menu
Copy
Copies the number in the edit field.
Paste
Pastes the previously copied number.
Disable all
Disables all fields.
Phonebook
Inserts a phone number in the edit field.
Add to phonebook Adds the number to the phonebook as a new personal data or saves the number in an existing personal data.
2 Depending on the conditions, some options may be displayed in gray and not be available.
11
Call waiting and holding (M162)
This facility informs you that another call is being made to your phone while an existing call is in progress.
Setting up call waiting
☛
1 6 2 ➔ 1 1 to activate, or 1 2 to deactivate the call waiting ➔ 2 to check the status of call waiting.
Using call waiting
☛ If you are on a call and another comes in, you will be alerted by a beep in the earpiece ➔ SK1 to put the current call on hold ➔ SK1 to accept
the incoming call
☛ To switch the calls, SK1
☛ To merge the calls, SK2 (see “Multi-party calls” on page 8)
☛ To end the current call,
☛ To retrieve the held call SK1
Auto redial (M163)
With the auto redial facility, your phone will redial a number up to 10 times if the first attempt fails. A tone will be heard at each redial attempt. Your phone
cannot connect a call if the other party is busy or if there are network problems. Pressing SK2 during a redial attempt will abort it.
☛
1 6 3 ➔ 1 to activate or 2 to deactivate the auto redial facility.
Line ID (M164)
, The line ID (identification) facility is network dependent.
The line ID facility enables you to choose whether or not to send your own phone number when you make a call
and also whether or not to display a caller’s phone number when you receive a call.
☛
1 6 4 to display the Line ID screen with a ✔ over an activated line and a ✘ over a deactivated line.
☛ To set the status of each line (see the table on the right), highlight a line (the line will flash when selected).
☛ SK1 to set the line identification on or off ➔
to save the current settings.
Line type Setting
Outgoing Send own #
Show connected #
Incoming Show Incoming #
Return own #
International dialling codes
When you make an international call from any country, you must start by dialling a special international access code. Your phone has the facility to prefix
a + symbol to the numbers, so that you need not enter the access code for the country that you are calling from.
Entering international dialling codes
☛ Hold down 0. The 0 character displayed will change to a + character ➔ Key in the country code, area code, and phone number that you wish to call.
The UK country code is always 44, no matter what country you are dialling from. For example, a typical UK number of 0131 1234567 is entered as:
12
International access country code
area code
phone number
131
1234567
44
Roaming
, You will be charged for calls forwarded to you while roaming.
The roaming facility enables you to use your phone in many parts of the world and pay all charges through your normal service provider. Your network
operator usually has agreements with named networks in other countries so that automatic roaming can take place with these named networks. The
phone also allows you to set network preferences of your own.
When dialling, you will need to add the international access codes if required. So, storing all numbers with the codes (such as +44 for UK) is helpful (see
page 12).
2 Before leaving your home country, you should select any preferences such as bar calls or call diversion.
Setting Automatic or Manual network selection (M181)
☛
1 8 1 ➔ 1 to select the automatic mode or 2 to select the manual mode.
, Before you manually select a network, ensure it is covered under the agreement you have with your service provider.
New search (M182)
☛
1 8 2 to search the available networks➔ Highlight the desired network ➔
to connect to it
Viewing/editing network list (M183)
, Before editing your network list, please consult with your service provider.
☛
1 8 3 to read the network list in the SIM memory ➔ Highlight the required network ➔
No.
SIM list Options menu
Add
Adds a new network to the list.
Move
Moves the highlighted network within the list.
☛ Use ▲ and ▼ to move the network ➔ SK1
Remove
Deletes the highlighted network.
Selecting the frequency band (M184)
You have to select the frequency band to suit the location.
☛
1 8 4 ➔ Select the required frequency band.
2 Frequency bands must be adjusted to suit the location when roaming (Europe, US, etc.), for the phone to work properly.
13
Text Entry
This section describes how you enter text. The same method of text entry can be used in phonebook editing.
Mode change
☛ With a text entry screen displayed, SK1 to change the text entry mode: T9® English text, Normal text (ABC), Numeric input
T9® English text input
Your phone incorporates T9® Text Input, enabling fast, easy and intuitive text input. For each letter to be keyed in, you only need to press the
alphanumeric key once. The screen will display the word you may require based on the internal English dictionary of your phone.
☛ With a text entry screen displayed, SK1 until the entry mode is T9® English input.
i) For example, to enter “Good”:
☛ Press 4 6 6 3, and then press 0 to confirm the word.
ii) To enter “Peter is good”:
☛ Press to shift to upper case (for one letter). You will see a green arrow in the Help area.
☛ Press 7 3 8 3 7 to display “Peter”, and then press 0 to confirm.
☛ Press 4 7 to display “is”, and then press 0 to confirm.
☛ Press 4 6 6 3 to display “good”, and then press 0 to confirm and the sentence is completed
Key
Function
Confirms a word and inserts a space.
SK1(List)
Displays the list of other matching words.
SK1(Spell)
Activates the spell mode which temporarily deactivates T9 for you to spell the word in Normal text input. The
spell mode ends when you key in 0 to enter a space.
SK2(Dismiss)
Cancels the T9 matching word list.
SK2(Next) or #
Displays the next candidate.
▼
▼
or
CLR
Places the cursor.
Deletes any character.
Toggles between lower case, shift (upper case for one letter) and caps lock (permanent upper case).
14
Activates symbol mode when no word is highlighted.
Normal text input
☛ With a text entry screen displayed, press SK1 until the entry mode is Normal text (ABC) input.
☛ Use alphanumeric keys to enter letters. For example, to enter “e”, press 3 twice; to enter “f”, press 3 three times. For other functions, see the table
below.
Key
Function
Toggles between lower case, shift (upper case for one letter) and caps lock (permanent upper case).
Inserts a space.
CLR
Deletes any character.
▼
▼
or
Places the cursor.
Activates symbol mode.
▼
▼
▼
2 If you have made a mistake, use ▲ ▼
to place the cursor to the right of the incorrect character and then press CLR.
2 When entering normal (ABC) text, and the character you require is displayed, use key to move to the next character position (if you wait for more
than 1 second, the cursor will move one character to the right automatically).
Numeric input
☛ With a text entry screen displayed, press SK1 until the entry mode is Numeric input.
☛ Use alphanumeric keys to enter numbers.
Key allocations
Whenever you need to enter text (for short messages, storing names with numbers, etc.), successive presses of an alphanumeric key will display different
characters. Pressing in T9® English text input or Normal text (ABC) input toggles between lower case, shift (upper case for one letter) and caps lock
(permanent upper case). Whenever a text entry screen is displayed, pressing SK1 enables you to select Normal text input (ABC), T9® Text input (T9) or
Numeric input (123).
Symbol mode
In the symbol mode, pressing each key will input a symbol according to its position on the Symbols screen. By pressing # in a text entry mode, the Symbol
screen will be displayed. Use ▲ and ▼ to select the row, and then press the appropriate number on the column of the required symbol.
15
IR Data Exchange
Your phone is equipped with an InfraRed (IR) data port which enables you to send and receive phonebook/picture/video/sound excluding MP3/schedule/
ToDo list/note data with cellphones or other devices equipped with IR ports.
, Do not aim or direct the IR data port towards your or other people’s eyes when using IR data exchange.
, Do not aim or direct the IR data port towards another IR device as this may cause the device to malfunction.
2 Depending on the other party’s cellphone or device, the data may not be received correctly.
Positioning of the phones
, Open both sending and receiving phones vertically and place them as
their IR ports face each other with less than 20cm of interval.
Do not place anything between IR ports.
The angle made of two IR ports must be within 30°.
Do not move the phones until the data exchange is complete.
The phones may not communicate successfully if they are placed under direct
sunlight or fluorescent light, or close to other infrared devices.
2 While sending or receiving data through IR, your phone is automatically placed out of
service, so phone call, message and i-mode access are disabled.
15° or less
r les
mo
20c
IR send
You can send phonebook/picture/video/sound excluding MP3/schedule/ToDo list/note data as a file through the IR port.
/ Before starting to send data, the other party must be ready to receive data.
Phonebook entry (M413...)
2 You can only send Name, Home, Mobile, Work, Fax, 2 Email addresses and 2 pieces of descriptive information.
2 Your phone sends data according to the vCard 2.1 specification.
☛ To display the phonebook (Phone), (for required number of times) or
4 1 3 ➔ Highlight a phonebook entry.
☛
0 or
3 ➔ The phonebook entry will be sent through the IR port.
Picture/video/sound file (M84...)
☛
6 ➔ 1 (Picture), 2 (Videos) or 4 (Sounds) ➔ Highlight a folder ➔
(Sounds) ➔ The schedule entry will be sent through the IR port.
16
➔ Highlight a file ➔
➔
2 ➔ 3 (Picture/Videos) or 4
Schedule entry (M84...)
☛
8 4 ➔ Highlight a date ➔
➔ Highlight a schedule entry ➔
ToDo entry (M85...)
☛
8 5 ➔ Highlight Public, Private or All ➔
Note (M862...)
☛
8 6 2 ➔ Highlight a note ➔
➔
➔ Highlight a ToDo entry ➔
and 9 ➔ The schedule entry will be sent through the IR port.
7 ➔ The ToDo entry will be sent through the IR port.
2 ➔ The note entry will be sent through the IR port.
IR receive (M891)
You can standby your phone to receive data (phonebook/picture/video/sound excluding MP3/schedule/ToDo list/note data) from other devices or a phone
of the same model.
Receiving data through IR (M891)
☛
8 9 1 ➔ Start sending data from the other end.
2 Once the transmission completes, your phone automatically judges the type of received data.
2 If your phone does not have enough space to store the received data, a message will be displayed indicating lack of space. In such a case, delete
unnecessary data and try the data exchange again.
2 Received picture/video/sound files are stored in the Download folder of My data (see “My data (M6)” on page 59).
IR modem (M892)
You can use your phone as a modem for a PC via the IR port to establish a dial-up connection to an Internet service provider.
Activating the IR port for modem use
☛
8 9 2 ➔The phone will be in standby status for IR transmission from the external device.
2 If the IR transmission is not established in 30 seconds, the standby status will end.
2 While on active call or connecting to the external device such as USB, IR modem is not available. Check your service provider to use your phone
as a modem to connect to the Internet.
, Your phone consumes a lot of battery power when used as a modem. After using your phone as a modem, be sure to deactivate the
modem function from your PC or press (for the CSD connection only). When the modem function is deactivated, the idle screen will
be displayed without the Infrared icon and GPRS icon.
2 Check with your service provider to use your phone as a modem to connect to the Internet.
17
Desktop icons
Desktop icons are shortcuts to functions or items. You can activate a desktop icon on the standby screen (desktop) in stead of following the menu and
pressing the shortcut numbers.
The desktop icons are displayed in two rows on the standby screen. See “LCD and displayed icons” on page vii for the actual location of the desktop
icon area.
There are two types of desktop icons: the automatically displayed and the manually created.
Automatically displayed desktop icons
The following automatically displayed icons are displayed on the upper row of the desktop icon area:
Icon name
Image
Description
Missed call
Displayed when there is a new entry in the Missed calls list.
Missed message
Displayed when there is a new message you have not acknowledged.
Missed Mail
Displayed when there is a new Mail you have not acknowledged.
2 You can delete all the automatically displayed icons by pressing and holding CLR on the standby screen.
2 If you turn the phone off, all the automatically displayed desktop icons are deleted.
Manually created desktop icons
The following manually created icons are displayed on the lower row of the desktop icon area:
Icon name
18
Image Description
Phone number
Displays a dialer screen with the registered phone number displayed.
Mail address
Displays the Msg type screen. A new message edit screen is displayed with the registered mail address in the To
field.
URL
Activates the browser and accesses the registered URL.
Picture
Displays the image file.
Notepad
Displays the Notepad screen with the note file displayed.
Camera
Displays the camera view finder screen.
Video
Displays the video view finder screen.
Music player
Displays the Music player screen.
Creating a desktop icon manually
☛ Activate the required function (camera/video/music player) or display the item (image file/note file/phone number/mail address/URL).
☛
to display the Options menu and select Add desktop icon (for an image/note file, this menu is under Use item, and for camera/video, under
Other settings).
2 You can create up to 10 desktop icons.
2 If you have more than 5 desktop icons, an arrow will be displayed to indicate that you can scroll for more icons.
2 The phone number, mail address or URL desktop icon data will not be updated when the original data is modified. Delete the old desktop icon
and create a new one in such a case.
2 When you create a desktop icon of an image file or notepad file, the data will be automatically protected. The default title will be the file name,
even if this title is changed the original file name will remain the same.
2 Each manually created desktop icon has a title that you can edit.
Activating a desktop icon
☛
➔ Highlight the required desktop icon ➔
2 If you do not press any key for three minutes after highlighting a desktop icon, the highlight is cancelled and the screen goes back to the normal
standby screen.
2 If you activate an automatically displayed desktop icon, it will be deleted automatically.
Desktop icon Options menu
☛ Highlight a desktop icon ➔
No.
Desktop icon Options menu
Edit title
Edits the title of the highlighted desktop icon.
Delete one
Deletes the highlighted desktop icon.
Delete all
Deletes all the manually created desktop icons.
19
Settings (M1)
Phone (M11)
☛
11
No. Phone
Voice volume
Adjusts the sound volume output from the earpiece.
☛ Use ▲ ▼, Side keys or alphanumeric keys (0 to 9) to adjust the volume.
2 You can also press the Side keys to display the volume control screen and to adjust the volume setting.
2 During a call, you can press the Side keys to adjust the setting of the volume as required.
Answer options
1 Any key answer
On: Any key (except , SK2, the Side keys) is valid to answer a call
Off: Only
and SK1 are valid to answer a call
2 Ring silencer
On: Pressing one of the Side keys stops the ringer sound and the vibrator while
receiving a call.
2 This function cannot be used if your phone is folded and the Side keys are
locked.
/ See also: “Mute” on page 8.
3 Fold answer
On: You can answer an incoming call by opening your phone.
Side key
Disable: Side keys are locked while your phone is folded.
2 You can also lock/unlock the Side keys by pressing and holding
ALS setup
, The Alternate Line Service (ALS) facility is SIM card and network dependent.
Clock
on the standby screen.
If your SIM card supports ALS, you can setup which line to use for Outgoing call or Voice mail.
20
1 Show clock
Sets to display the local time, both the local and remote times or no time on the
main-LCD.
2 Set time
Sets the time for the local or remote time.
3 Set date
Sets the date.
4 Set date format
Selects the date display format.
5 Set time format
Selects the time display format from 12 hour or 24 hour.
No. Phone (Continued)
5 Clock (Continued)
6 Set timezone
Sets the timezone. (A ✔ is placed on the currently selected timezone.)
☛ Highlight the required timezone➔Press SK1 to save the change.
2 If the highlighted timezone has Daylight Savings, a check box will be
displayed at the bottom of the screen. Press to activate (✔)/deactivate
the setting.
6 Language
Selects the language the phone displays.
2 When you have switched the language to be displayed, please wait until the new setting becomes active.
7 LED
Selects the Light Emitting Diode (LED) colour for incoming calls/SMS/Mail or during a call.
8 Earphone type
Selects the earphone type from Stereo or Monaural, depending on your earphones (headset).
Phone modes (M12)
Your phone can be set to one of the following modes: Normal mode, Meeting mode, Pocket mode or Car mode.
, Any changes made to the settings while in a particular mode will be stored and used when that mode is selected again.
Selecting your phone mode
☛ ▲ or
1 2➔ Press the appropriate key for the required mode.
2 You can also set the Meeting mode or return to the previous mode by pressing and holding ▲ on the standby screen.
Editing the mode settings
☛ ▲ or
1 2 ➔ Highlight the required mode ➔ SK1 ➔ Press the appropriate number for the required setting in the following table.
☛ For any volume setting, use ▲ ▼, Side keys or alphanumeric keys (0 to 9).
No. Phone mode setting
Ringer
Ringer volume
Selects the Sound or Video for incoming calls. (See “Sounds (M64)” on page 61 or “Videos (M62)” on page 60 for
details.)
Sets the sound volume for incoming calls.
2 While receiving a call with your phone open, the ringer volume can also be adjusted by pressing the Side keys.
SMS tone
Selects the ringtone for incoming SMS messages. (See “Sounds (M64)” on page 61 for details.)
SMS tone volume
Sets the sound volume for incoming SMS messages.
21
No. Phone mode setting (Continued)
Mail tone
Selects the ringtone for incoming Mail or MMS messages. (See “Sounds (M64)” on page 61 for details.)
Mail tone volume
Sets the sound volume for incoming Mail or MMS messages.
Key tone
Turns on/off the key tone.
Service tone
Turns on/off the service tone.
Alarm volume
Sets the sound volume for Clock alarm and Schedule alarm.
Vibrator
Turns on/off the vibrator function.
Earphone setting
Selects the sound output from Speaker and Earphone or Earphone only.
Auto answer
Selects whether to answer an incoming call automatically.
2 If the selected mode is Car mode, the backlight will always be turned on. This will reduce battery life.
Main-LCD (M13)
☛
13
No. Main-LCD
Greetings
Selects the greeting which is displayed on the main-LCD during phone start-up from No greeting, Text or
Animation.
☛ If you select Text greeting, press SK1 to edit the greeting text. Key in a greeting text and press .
Wallpaper
Selects a image/video file to use as the background for the main-LCD.
Main menu style
Selects and resets the background and icons for the Main menu screen.
Colour style
Selects the phone’s colour theme.
2nd-LCD (M14)
☛
14
No. 2nd-LCD
22
Clock/Event display
Selects which items to display on the 2nd-LCD from Clock&Event, Clock only, Event only or Off.
No. 2nd-LCD (Continued)
Clock orientation
Selects whether to display a horizontal clock or a vertical clock.
2 When you select to display a vertical clock, it is read from the camera and LED end.
2 The event displays and incoming call numbers are shown along the long end according to the Display
direction.
Incoming call No.
Turns on/off the function to display the incoming call number on 2nd-LCD.
Display direction
Selects which direction to display the 2nd-LCD.
2 This setting does not effect the vertical clock.
Contrast
Sets the contrast level of the 2nd-LCD.
Power saving (M15)
☛
15
No.
Power saving
Level setting
Function key LED
Selects the power saving level from Level 1 (minimum power save setting), Level 2 (moderate) or Level 3
(maximum).
2 The main-LCD backlight will turn dim and then turn off after a given amount of time with no operation.
2 When the phone is folded, Power saving level also applies to the 2nd-LCD.
2 If the selected mode is Car mode, this function is not available.
Selects whether to flash the LED of SK1and SK2 when the main-LCD and its backlight are turned off.
2 If the selected mode is Car mode or the camera view finder screen is displayed, the main-LCD backlight will
always be on.
Calls (M16)
☛
16
/ For settings provided on the Calls screen, see “Call settings (M16)” on page 11.
Security (M17)
☛
17
The security settings will help to protect your phone from improper and unauthorized use. You may be required to enter one of the five codes (shown
below). When the phone prompts you for one of these codes, key in the appropriate number.
23
• PIN code (provided by your network service provider to protect your SIM card if it is stolen)
• PIN2 code (provided by your network service provider for charge information and Fixed dialling services protection)
• PUK code (personal unblocking key in case you forget PIN code)
• PUK2 code (personal unblocking key in case you forget PIN2 code)
• Security code
, If you forget any of these codes, ALWAYS contact your service provider as they are the ONLY source for your codes.
PIN code
Your phone can be set up so that your PIN code must be entered at power up before the phone can be used at all. If the PIN code is not entered, not
even incoming calls can be answered. Entering your PIN code incorrectly 3 times (not necessarily in the same session) will invalidate the correct PIN
code. In such a case you will have to contact your service provider for a PUK code to unblock your SIM card.
2 Some SIM cards are set up so that PIN number entry cannot be turned off.
2 When SIM PIN lock is enabled, you can change the PIN code.
PIN2 code
Your phone supports advanced feature that may require a PIN2 code to be entered before they can be accessed or modified. Entering your PIN2 code
incorrectly 3 times (not necessarily in the same session) will invalidate the correct PIN2 code. In this case you will have to contact your service provider
for a PUK2 code.
, The PIN2 code is SIM card related and may only be available from your service provider.
No.
24
Security
Change PINs
Changes the PIN or PIN2 code.
PIN activate
Turns on/off the PIN code entry required at starting up the phone-up.
Change security code
Change the security code which is used to unlock the Personal Information Manager (PIM) features.
2 The default setting of the security code is “0000”.
Phone lock
Turns on/off the Phone lock function which will lock the phone: you can only make emergency calls or enter
the security code. After entering the correct security code, you can use the phone normally.
2 Upon power-up, you are prompted to enter the security code if the Phone lock was active when the phone
was powered down.
Bar calls
You can bar the following calls made/received on your phone: All outgoing (dialled) calls, international
outgoing (dialled) calls, international outgoing (dialled) calls except to home, all incoming (received) calls or
incoming (received) calls when roaming.
No.
Security (Continued)
Bar calls (Continued)
Fixed dialling
☛ Highlight the type of restriction and the call type, and then
Change settings
➔
to save
changes.
☛ Key in your bar calls password to verify user identification to the network
➔ SK1 to confirm and save changes to the network.
2 The selected settings have red bars over their icons.
Set password
, Bar calls facilities are network services and may require a password.
Changes the bar calls password.
Turns on/off the fixed dialling which restricts the use of dialled number to only the Fixed Dialling Numbers
(FDN).
, The FDN facility is network dependent.
/ See also: “Fixed dialling numbers (FDN)” on page 46.
Network (M18)
☛
18
/ For settings provided on the Network screen, see “Roaming” on page 13.
Reset settings (M19)
☛
19
This function will reset your phone to its factory settings.
, By restoring the factory settings, any changes you have made to your phone except the following will return to the factory settings (the
following data/settings will not be reset):
• Settings: Set time, Set date, Language, Power saving settings for Level 1/2/3, all settings in Calls other than Auto redial, all Security settings, SIM
list settings in Network.
• Camera & Video: The settings for Camera (Shoot environment, Effect, Burst mode, Frame, Self timer, Light, Full screen, Switch finder, Zoom and
Brightness). The settings for Video (Shoot environment, Effect, Light, View finder, Brightness, Volume, Full screen and Zoom). The settings for
Video preview screen (Full screen and Screen size).
• All call lists and call information
• Phonebook: All Phonebook entries. The settings for Groups.
• Accessory: All Schedule, ToDo, Notepad and Voice memo entries. All the settings other than Clock alarm, Play list for Music player, View events
for Scheduler and Sort for ToDo.
• i-mode: All Bookmarks and Saved pages. All the i-mode related settings.
25
• Java: All the Java™ applications.
• Message: All the stored messages. The settings for Msg filter and Msg filter details, SMS centre number, Slide settings, MMS message settings
and MMS centre.
• My data: All stored files.
Message (M2)
Message overview
Message services
Your phone supports the following messaging services:
• Short Messaging Service (SMS) allows you to send short messages (160 half-pitch characters max.) to a phone number. To send an SMS
message, the destination phone number must be a mobile phone with an SMS service subscription. SMS service also supports Enhanced
Messaging Service (EMS) for which the maximum length of the message you can send depends on the number of linked messages (maximum of
10 linked messages are available).
, The Short Messaging Service is network dependent.
• Mail (i-mode messaging service) allows you to send a message to not only other cellphones but also to PCs and other devices that uses Email
addresses. You can attach files from Pictures, Videos and Sounds folders in My data (see page 59). Mail facility is available from the Mail screen
under the i-mode facility. For details on the mail service, see “i-mode (M3)” on page 32.
• Multimedia Messaging Service (MMS) is a service that allows you to send messages of a slideshow of text and multimedia files. When you receive
an MMS message, you will be notified by a message from the MMS centre. You can either automatically or manually receive the contents of an
MMS message. MMS facility is available from the Mail screen under the i-mode facility. For details on the mail service, see “i-mode (M3)” on
page 32.
Standard messages
While a message is being sent or received, a name, a number and a CLI picture will be displayed (if a name and CLI picture have been stored with the
number in your phonebook). The received messages are stored on the SIM card or in your phone memory. When you receive a message, your phone
will ring or beep during a call, and a new message icon will be shown on your phone’s display and its LED will glow.
Your phone will automatically send a message to the service centre when your SIM memory for the message is full. The service centre will stop sending
your phone any further messages until your phone automatically notifies the centre that there is some free message space.
2 Please delete the unnecessary messages in the folders from time to time. The phone cannot receive any messages when the Inbox folder is full.
26
Message screen
☛ To display the Message screen,
No.
2 ➔ Press the appropriate key for the required option.
Message screen menu
Inbox
The received messages are stored here.
Drafts
The messages currently being edited are stored here.
Outbox
The messages that failed to be sent are stored here.
Sent
The sent messages are stored here.
Folder1/Folder2
The messages moved by Move msg (see “Message list Options menu” on page 28) are stored here.
CB
The received broadcast messages are saved. See “Cell broadcast (M27)” on page 32 for details.
5, 6
2 If there is no message in a message list, the list will be displayed in gray and you cannot select it.
Reading a message (M21)
☛ To display the Message view screen of a new message,
2 1 ➔ Highlight the new message ➔
☛ The new (unread) messages are displayed in bold.If the message cannot be displayed in one page, press ▲ and ▼ keys to scroll through the
message.
The following icons will be displayed.
Icons Descriptions
Message type icons
SMS message
Incomplete SMS message
Storing location icons
Highlighted message stored in SIM
Highlighted message stored in the phone memory
Sorting status icons
Messages sorted by Date
Messages sorted by Name
Messages sorted by Read/Unread status
Messages sorted by Size
Messages sorted by Ascending order
Messages sorted by Descending order
Icons Descriptions
Read / Unread status icons
New / Unread message(s)
Read message(s)
Filtering status icons
SMS messages filtered by status (incomplete)
SMS messages filtered by location (SIM)
SMS messages filtered by location (the phone memory)
Filtered SMS messages
Sent message status icons
Sent but failed message
Sent message
27
Message Options menu (M2M)
☛
No. Message Options menu
SMS settings
SMS centre
Edits the SMS centre number (this number is saved in the SIM card).
Auto display
Turns on/off the automatic display function that displays the received SMS messages
automatically.
Receipt request
Selects whether to request a receipt of the sent SMS messages.
Max linked msgs
Sets the maximum number of linked SMS messages. This function divides an SMS with
the message text exceeding the maximum number of characters allowed into multiple
messages.
Validity period
Selects the period of time an SMS message is stored at the SMS centre, while trying to
deliver the message.
Enable
1 to receive none, 2 to receive all, or 3 to specify a list or Cell Broadcast Message
Identifier (CBMI) to receive broadcast from.
Languages
Selects which language to receive the cell broadcast messages in.
CB settings
View msg status Displays the number of messages stored in your phone and SIM card, and their total data size.
Rename folder
Renames Folder1 and Folder2 folders.
View all
Displays all the messages in all folders on the same list.
Msg filter
Sets the type(s) of messages to be displayed by selecting the desired filter option.
, The receipt request and linking of SMS messages are network dependant.
2 Depending on the selected folder, some options may be displayed in gray and not be available.
Message list Options menu
☛ Display the message list in the Inbox, Sent, Drafts, Outbox, Folder1 or Folder2 ➔
No.
28
Message list Options menu
Reply
Replies to the sender of the highlighted message.
Reply all
Replies to the sender and all other recipients of the highlighted message.
Delete
Deletes the highlighted message.
Delete all
Deletes all the messages in the current folder.
No.
Message list Options menu (Continued)
Forward
Forwards the message text of the highlighted message.
Msgs/page
Selects either to display 3 or 7 messages in one screen.
Move msg
Moves the highlighted message to another folder, to the SIM card, or to the phone memory.
Sort msg
By:
Order:
Search
Searches messages by alphabets.
View details
Displays detailed information on the highlighted message.
–
Add desktop icon
Creates a desktop icon of the highlighted message.
–
Edit
Edits the highlighted message (Drafts and Outbox only).
–
Resend
Resends the highlighted message in the folder (Outbox only).
The entire message or only the packets that failed to reach the recipient(s) can be sent.
Sorts the messages by date, name, read/unread status or size.
Sorts the messages in ascending or descending order.
2 Depending on the selected folder, the menu number and available options may vary.
2 Depending on the selected folder, some options may be displayed in gray and not be available.
Message view Options menu
☛ Display the message list in the Inbox, Sent, Drafts, Outbox, Folder1 or Folder2 ➔ Highlight a message ➔
No.
➔
Message view Options menu
Reply
Replies to the sender of the highlighted message.
Reply all
Replies to the sender and all other recipients of the highlighted message.
Delete
Deletes the highlighted message.
View details
Displays detailed information on the highlighted message. The detailed information includes Msg status,
From, To, Date, Msg type, Size and Folder.
Forward
Forwards the message text of the highlighted message.
Save object
Saves the highlighted object to a folder in My data.
Move msg
Moves the highlighted message to another folder, to the SIM card, or to the phone memory
Highlight mode
Activates the Highlight mode.
Add desktop icon
Creates a desktop icon of the highlighted message.
2 Depending on the conditions, some options may be displayed in gray and not be available.
29
▼
and to highlight a phone number, Email address or URL in the message ➔
The columns shows the menu numbers for P: Phone number highlighted, E: Email address highlighted and U: URL highlighted.
▼
☛
2 The reply facility uses the phone number of the person who sent the message.
2 The Save object Options menu will be displayed only if an object is highlighted.
Message view Options menu
–
Add to phonebook
Adds the highlighted phone number or Email address to a phonebook.
–
–
Dial phone number
Dials the selected phone number.
–
–
Add to bookmark
Adds the highlighted URL to the bookmarks.
–
–
Launch browser
Activates the web browser to access the highlighted URL.
Create message
P:
E:
U:
–
Add desktop icon
Creates a desktop icon of the highlighted phone number/Email address/URL.
Creates a new SMS/Mail/MMS message with the highlighted phone number in the To field.
Creates a new SMS/Mail/MMS message with the highlighted Email address in the To field.
Creates a new SMS/Mail message with the highlighted URL in the message text or in the
slide text.
Creating a message
(green)
Indicates that an upper case letter will be input next.
(red)
Indicates the capital lock.
(no arrow) Indicates that a lower case letter will be input next.
30
☛ To display the Message composer screen,
2 and SK1 ( ➔
to display
the Message composer Options menu)
☛ To address the message, highlight the To field ➔ ➔ Input the required phone
number ➔
2 To scroll the phone numbers in the To field, or
☛ To key in the message, highlight the Message field ➔ ➔ Key in the message
➔
2 Pressing
while keying in the To/Message field displays the Message edit
Options menu screen.
☛ Press SK1 to send the message.
2 When you are in the ABC (normal text) mode, any word entered that is not in the
T9 dictionary will be added automatically.
2 When you are keying in your message, press SK1 to change the text entry mode.
2 If you display another screen or receive a call while you are editing a message
more than 1 character, the message will be saved automatically in Drafts.
▼
This area contains the
information on the message.
S indicates the size of the
message equivalent to the
number of SMS messages, and
R indicates the remaining
number of characters
available.
▼
Help area
Message composer Options menu
☛
2 SK1 ➔ Highlight To or Message field ➔
No.
Message composer Options menu
Add/Edit
Adds or edits a recipient phone number or a message.
Preview msg
Displays a message preview screen.
Delete
Deletes the highlighted recipient, message, or object.
Delete all
Deletes all the recipients, messages, or objects.
Save
Saves the message in Drafts folder.
Phonebook
Displays the phonebook list to insert a recipient phone number.
Resend list
Inserts a phone number from the redial list.
Insert
Inserts a new recipient phone number (To field only).
Address list
Displays the recipient of the message (To field only).
2 Depending on the selected field, some options may be displayed in gray and not be available.
Message edit Options menu
☛
2 SK1 ➔ Highlight To or Message field ➔
➔
No.
Message edit Options menu
Text colour
Selects the colour of text and background.
Text format
Selects the font size (normal, large or small) and font style (bold, italics, underline or strikethrough).
Text alignment Sets the text alignment (left, centred or right).
Paste
Pastes the text which has been copied onto the clipboard in the Highlight mode.
2 This function can be used only when text has been selected in the Highlight mode.
Highlight mode Activates the Highlight mode at the cursor position.
2 To toggle the highlight mode on/off, SK1 and to go back to the normal mode, CLR
2 To display the Highlight mode Options menu,
(see “Highlight mode Options menu” on page 31).
Insert object
Inserts Text, Sound, Picture, Animation, Emoticons or Pictograph into the message at the cursor position.
T9 Language
Selects the language for T9 text input.
Edit settings
Sets the Write mode (Insert or Overwrite) and Clear mode (Backspace or Delete).
2 Depending on the conditions, some options may be displayed in gray and not be available.
Highlight mode Options menu
☛
2 SK1 ➔ Highlight To or Message field ➔
➔
5➔
2 The first two options (Text colour, Text format) will operate similar to those in the Message edit Options menu, however, only for the highlighted
text.
31
No.
Highlight mode Options menu
Copy
Copies the highlighted part of text onto the clipboard.
Cut
Cuts the highlighted part of text.
Delete
Deletes the highlighted part of text.
Select word
Selects (highlights) the nearest word to the current cursor position.
Select paragraph
Selects (highlights) the nearest paragraph to the current cursor position.
Select all
Selects (highlights) the entire text.
Save to text file
Saves the highlighted part of text as a text file.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Cell broadcast (M27)
Cell Broadcast (CB) messages (e.g. weather reports, news) are sent by the network to all phones in a certain area.
☛
27
, Broadcast messages service is network dependent. Please contact your service provider for details.
i-mode (M3)
Using your phone’s browser facility, you can enjoy i-mode services such as browsing information on i-mode sites (programs) and other Internet web
pages, and sending/receiving i-mode messages which include the mail and MMS (including SMIL).
2 You can download melody files, images, animations, videos and Java™ applications to your phone’s memory. Some files with restrictions cannot be
saved to your phone's memory, even though they can be downloaded and played or displayed.
/ For the definitions of the icons related to i-mode, see “LCD and displayed icons” on page vii.
i-mode operation guide
You can access various i-mode functions by selecting the menus on the main four i-mode related screens such as i-mode screen, i-mode menu screen,
iMenu screen and Mail screen. The following table gives an outline of the procedures related to the i-mode services.
Action
Procedure
Browsing the i-mode sites/Internet web pages
Display the homepage
32
☛ Press and hold
2 You need to set the homepage URL in Home page beforehand (see “Set home page” on page 39).
Display the URL of the current page
Bookmark a web page
Display a bookmarked web page
Save a web page
Display a saved page
Save an image
Save a phone number
Display the certificate information
of the current page
Download a file
SK2 ➔ 6 ➔ 1 to key in the address, 2 to select an address in the history, or 3 to go to the homepage.
While browsing a webpage,
While browsing a webpage,
With the web page you want to bookmark displayed,
SK2 ➔ 5 or
2 while displaying another page ➔ highlight a bookmark ➔
With the page to save displayed,
SK2 ➔ 7 ➔ highlight a saved page ➔
3➔
With the page including the image to save displayed,
With the highlighted phone number to on the page,
With a page displayed,
You can also refer to a saved page’s certificate information by displaying the page and
3.
Highlight the link to the file to download ➔ ➔ When the download is complete, check that the
downloaded file is stored in My data (see page 59) or the Applications screen of Java™ (see page 64).
☛ While connecting to i-mode,
▼
Returning to the previous screen/
moving forward to the next screen
☛
☛
☛
☛
☛
☛
☛
☛
☛
☛
☛
next screen (if any).
to return to the previous screen (if any), or
to move forward to the
▼
Reload the current page
Procedure
▼ ▼
▼ ▼
Action
Display a web page
Mail/MMS
Create a mail
Create an MMS
Read a mail /MMS
Check for new mail/MMS
☛
☛
☛
☛
SK1 ➔ 1 (for details, see “Creating a new mail” on page 33)
SK1 ➔ 2 (for details, see “Creating a new MMS” on page 34)
SK1 ➔ 3 ➔ Highlight a message ➔
SK1 ➔ 6
Settings for i-mode
Change the mail settings
Change the browser settings
Change the phone settings related
to i-mode
☛ SK1 ➔ 7 (for details, see “Mail settings” on page 43)
☛ SK2 ➔ 8 (for details, see “Settings” on page 39)
☛
3 2 (for details, see page 37)
Mail/MMS operations
Creating a new mail
☛ SK1 ➔ 1
33
☛ Set the addressee.
☛
☛
☛
☛
☛
Highlight the To field ➔ ➔ key in the destination ➔
To refer to the phonebook,
➔ Open phonebook to retrieve the destination
To send the mail to more than one addressee,
➔ Add To/Cc/Bcc
To change the To/Cc/Bcc status of an already set addressee, highlight the destination ➔
➔ Change to To/Cc/Bcc
To delete an already set addressee, highlight the To field ➔
➔ Del. address
Key in the subject.
Highlight the Subject field ➔ ➔ key in the subject ➔
Key in the message.
Highlight the Message field ➔ ➔ key in the message ➔
To attach a header,
➔ Attach header
To attach a signature,
➔ Attach sign.
Attach a file if necessary.
Highlight the Attachment field ➔ ➔ select a file to attach from the My data screen
To delete an already attached file, highlight the attachment field ➔
➔ Delete attachment
To preview the attached file, highlight the attachment field ➔
➔ Play/View file
You can attach files up to 299 KB in total, or 10 files.
To send the mail, highlight Send ➔
To save the mail, highlight Save ➔
To delete the currently edited message,
➔ Del. message
Creating a new MMS
☛ SK1 ➔ 2 ➔ The Compose menu screen is displayed
☛ Using Compose menu options, create an MMS (for details, see the table “Compose menu options” on page 34) ➔ SK2 ➔ The Compose MMS
screen is displayed
☛ Set the addressee and key in the subject (see “Creating a new mail” on page 33 for details).
☛ Highlight SMIL ➔ ➔ The SMIL Compose menu screen is displayed. Use these menus to create slides with combinations of text, image, video
and sound..
No.
–
34
Compose menu options
Add/Delete media
1 Add/Delete text
Adds new text data or deletes the text data in the text field on the slide.
2 Add/Delete image
Adds an image file or deletes the image file in the image field on the slide.
3 Add/Delete audio
Adds a sound file or deletes the sound file in the sound field on the slide.
4 Add/Delete video
Adds a video file or deletes the video file on the slide.
No.
Compose menu options (Continued)
–
Exit
Shifts to the Compose MMS screen.
–
Save
Saves the currently created MMS.
–
Play video
Plays the video file on the slide.
–
Preview
Displays the created slides in order from the beginning at the preset playback time for each.
–
Add slide
1 Add slide
Adds a new slide after the currently displayed slide.
2 Insert slide
Inserts a new slide just before the currently displayed slide.
–
Delete slide
Deletes the currently displayed slide.
–
Text colour
Selects the Text colour from the 16 different colours.
–
Background colour
Selects the Background colour from the 16 different colours.
–
Set Fit mode
Selects the size in which the image/video is displayed.
1 Hidden
Displays the image/video in the actual size.
2 Fill
Displays the image/video in the reduced size so that the height and width fit
into the image/video display area.
3 Meet
Displays the image/video in the reduced size so that the longer side of the
height or width fits the corresponding side of the image/video display area.
4 Slice
Displays the image/video in the reduced size so that the shorter side of the
height or width fits the corresponding side of the image/video display area.
–
Options
Sets the length of time a slide is displayed, and sets the beginning and end times for text, image or sound
within that slide display time.
2 You cannot set the beginning and end time for video files.
–
Resize region
Changes the region size of the image/video field and the text field, using the ▲ and ▼ keys.
–
Switch positions
Switches positioning of the image/video field and text field on the slide.
–
Previous slide
Displays the previous slide.
–
Next slide
Displays the next slide.
2 Depending on the conditions, some options may be displayed in gray and not be available.
☛ When you finish editing SMIL, CLR to return to the Compose MMS screen.
☛ If necessary, edit the composed MMS using the Edit menu options menu (see “Editing the composed mail/MMS” for details).
35
Editing the composed mail/MMS
☛ With the Compose mail/MMS screen displayed,
No.
➔ Edit the mail/MMS using the options menu.
Edit menu options
–
Send
Sends the mail.
–
Save
Saves the mail being edited to the draft folder.
–
Attach file
Attaches a file to the mail.
–
Delete attachment
Deletes the attached file(s).
–
Play/View file
Plays or displays the attached file.
–
Open phonebk.
Adds the destination directly from the phonebook.
–
Add To/Cc/Bcc
Adds a To/Cc/Bcc field.
–
Change to To/Cc/Bcc Changes the highlighted Cc/Bcc/To field to a To/Cc/Bcc field.
–
Del. address
Deletes a destination field.
–
Attach header/sign.
Attaches a stored opening sentence at the start or a stored signature at the end of the text.
–
Del. message
Deletes the message of the mail being edited.
–
Del. mail
Deletes the new mail currently edited.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Reading a received mail/MMS
SK1 ➔ 3 ➔ The list of mail/MMS in the Inbox folder will be displayed.
Highlight the message to read ➔ ➔ The message content will be displayed. Scroll the message content.
To view the previous message , to view the next message,
While reading a received mail/MMS in the Inbox folder, you can use various functions. See “Inbox” on page 41.
If Auto play is on (see “Auto play” on page 43), the MMS/SMIL will be automatically played/displayed. if not, press SK1 to start playing.
You can change the font size by pressing and holding the and . enlarges the font size, while reduces it.
i-mode screen
From the i-mode screen you can change the i-mode related settings of your phone.
☛
3 ➔ The i-mode screen will be displayed.
36
▼
▼
▼
▼
▼
▼
☛
☛
☛
No.
i-mode screen menus
i-mode
Settings
Displays the i-mode menu screen (For details, see “i-mode menu screen menus” on page 37).
Ringer time
Sets the ringtone duration to 3-10 seconds for incoming mail/MMS.
Connection No.
Selects the connection number settings to use. The following settings are
available:
Factory setting
2/3 User setting 1/2
Uses the default connection numbers.
Uses and changes the following settings.
Access point
i-mode server (Gateway address)
Portal server (i-mode server)
Mail
User data
Port No.
User name
Password
HTTP Port No.
SSL Port No.
i-mode lock
Locks the i-mode function, including mail/MMS.
i-mode menu screen
From the i-mode menu screen you can access to the iMenu/Mail/Message screen, your bookmarks, the entry screen for a URL to be displayed, the
access history, the saved pages and the list of Java™ applications.
☛ SK2 or
3 1 to display the i-mode menu screen.
No.
i-mode menu screen menus (Sheet 1 of 3)
iMenu
Accesses the iMenu screen. (See “iMenu screen” on page 39.)
Mail
Displays the Mail screen, on which you can display received mail/MMS, saved draft messages and sent messages,
and also create new mail/MMS (see “Mail screen” on page 40).
Java application
Displays the list of Java™ applications (see “Java™ (M7)” on page 64 for details).
SMS
Displays the Message screen, on which you can read received SMS and create new SMS (see “Message (M2)” on
page 26).
37
No.
i-mode menu screen menus (Sheet 2 of 3)
Bookmarks
Displays the list of bookmarked web pages.
Bookmarks Options menu
Go to webpage
Saved pages
Open
Displays the highlighted bookmark.
Copy address
Copies the highlighted bookmark address.
Edit title
Edits the title of the highlighted bookmark.
Add desktop icon
Creates a desktop icon of the URL of the selected bookmark.
Create message
Creates a new message with the highlighted bookmark address in the message text.
Delete one
Deletes the highlighted bookmark.
Delete all
Deletes all the bookmarks.
Displays the URL you key in, or displays the URL in the address history.
Enter address
Prompts you to key in a web page address.
Address history
Displays the list of addresses in the access history for you to select from.
Go to home
Displays the homepage set in Home page of Settings (See page 39).
Back
Returns to the i-mode menu screen.
Displays the list of saved pages. Saved pages are stored in your phone memory so you can see them offline.
Saved pages list Options menu
Open
Displays the current saved page.
Edit title
Edits the title of the current saved page.
Protect On/Off
Protects or unprotects the current page.
Delete one
Deletes the current saved page.
Delete all
Deletes all the saved pages excluding the protected.
Delete all + Pr.
Deletes all the saved pages including the protected.
Saved pages details Options menu
38
Save image
Saves an image as a file on the current saved page.
Edit title
Edits the title of the current saved page.
Certificate info
Displays the certificate information on the current saved page.
No.
i-mode menu screen menus (Sheet 3 of 3)
Saved pages
(continued)
Settings
Page info
Displays the URL on the current saved page.
Protect On/Off
Protects or unprotects the current page.
Delete
Deletes the current saved page.
Changes the settings of your browser.
Set time out
Disconnects the connection after the set time. You can set 60 seconds or 90 seconds,
or disable this function.
Load images
Sets whether to display images contained in web pages.
Wrap text
Sets whether to display text as is on web pages and mail/SMIL text, or wrap it to fit
your phone’s screen.
Certificates
Displays the certificate information and validates/invalidates a certificate.
Send terminal info Sets whether to send the terminal information to the Information Providers (IPs).
, If you agree to send private information (e.g. production serial No. and SIM
No.) to the IPs via the Internet, it may be obtained by others.
Set homepage
Validates the homepage and sets the URL.
2 You can display the homepage by pressing and holding the Side up key from the
standby screen.
Video auto play
Sets whether to play a video file automatically after the download is completed.
Check settings
Displays all the options set for the settings (browser).
Back
Returns to the i-mode menu screen (see “i-mode menu screen” on page 37).
2 Depending on the conditions, some options may be displayed in gray and not be available.
iMenu screen
From the iMenu screen you can access the various services, and also use the function menus of your browser such as adding a bookmark, saving a web
page and creating a message.
☛ SK2 or
3 1 to display the i-mode menu screen ➔ 1 to display the iMenu screen ➔
to display the browser options menu.
No.
–
Browser options menu
Add bookmark
Bookmarks the current page.
39
No.
Browser options menu (Continued)
–
Bookmarks
Displays the Bookmark list.
2 This option is displayed only when one or more bookmarks are registered.
–
Save image
Saves an image on the current page.
2 This option is displayed only when one or more images are displayed on the current screen.
–
Save page
Saves the current page.
–
Add to phonebook
Saves the phone number displayed in the current page in the phonebook.
2 This option is displayed only when one or more phone numbers are displayed on the current screen.
–
Certificate info
Displays the server certificate of the current page.
2 This option is displayed only when the current page is a SSL page.
–
Go to webpage
Displays a page by keying in the URL or using the access history (see “Go to webpage” on page 38).
–
Reload
Updates the data on the current page.
–
Page info
Displays the URL of the current page.
–
Add desktop icon
Creates a desktop icon of the URL of the current page.
–
Create message
Displays the Create message screen with the highlighted phone number or Email address in the message text.
, If you agree to send private information (e.g. production serial No. and SIM No.) to the IPs via the Internet, it may be obtained by others.
2 Pressing CLR or
may not bring back the previous screen. Screen operations depend on the current screen content.
Mail screen
From the Mail screen you can use the i-mode message services.
☛ SK1 or
3 1 2 to display the Mail screen.
2 The available options differ depending on the operators.
2 If an error occurs while sending mail, it will be saved in the Draft folder as an unsent mail.
2 The same mail can be sent to up to five addresses.
2 If you save a mail while editing, it will be saved in the Draft folder.
No.
40
Mail screen menus (Sheet 1 of 5)
Compose mail
Displays the Compose mail screen (see “Creating a new mail” on page 33).
Compose MMS
Displays the Compose MMS screen (see “Creating a new MMS” on page 34).
No.
Mail screen menus (Sheet 2 of 5)
Inbox
Displays the list of received mail/MMS.
Inbox list Options menu
–
Show all
Displays all the received mail/MMS.
–
Show unread
Displays only the unread mail/MMS.
–
Show read
Displays only the read mail/MMS.
–
Show protect.
Displays only the protected mails/MMS.
–
Delete one
Deletes the currently selected mail/MMS.
–
Delete read mail
Deletes all the read mails except protected mails/MMS.
–
Delete all
Deletes all the mails/MMS.
–
Title sort
Sorts the received mails/MMS by title.
–
Address sort
Sorts the received mails/MMS by address.
–
Date sort
Sorts the received mails/MMS by date.
Inbox details Options menu
–
Reply
Replies to the received mail/MMS.
–
Reply quoted
Replies to the received mail quoted.
–
Reply all
Replies to all the received mails/MMS.
–
Reply quoted all
Replies to all the received mails quoted.
–
Forward
Forwards the received mail/MMS.
–
Delete
Deletes the received mail/MMS you are viewing.
–
Save address
Saves the address of the sender into the phonebook.
–
Add to phonebook Saves the highlighted phone number into the phonebook.
–
Create message
Creates a new mail/MMS with the highlighted Email address or phone number.
–
Save melody
Saves the melody attached to the received mail.
–
Save attachment
Saves the attached file.
–
Copy message
Copies the message text.
–
Copy subject
Copies the desired subject text.
41
No.
Mail screen menus (Sheet 3 of 5)
Inbox (Continued)
–
Copy address
Copies the desired address.
–
Play SMIL
Plays the SMIL content based on the content setting.
–
Play SMIL
Play SMIL Options menu
–
Browse SMIL
Copy text
Copies the text data on the slide.
Save image
Saves the image file on the slide.
Save audio
Saves the audio file on the slide.
Save video
Saves the video file on the slide.
Play video
Plays the video file on the slide.
Plays the SMIL content manually.
Browse SMIL Options menu
–
Sent mail
Protect On/Off
Copy text
Copies the text data on the slide.
Save image
Saves the image file on the slide.
Save audio
Saves the audio file on the slide.
Save video
Saves the video file on the slide.
Add to phonebook
Saves the phone number in the slide text.
Create message
Creates a message to the destination in the slide text.
Protects or unprotects the received mail/MMS.
Displays the list of sent mail/MMS.
Sent mail list Options menu
–
Title sort
Sorts the sent mail/MMS by their titles.
–
Address sort
Sorts the sent mail/MMS by their first destination addresses.
–
Date sort
Sorts the sent mail/MMS by the date they were sent.
–
Delete one
Deletes the selected mail/MMS.
–
Delete all
Deletes all the sent mail/MMS.
Sent mail details Options menu
42
–
Re-edit
Displays the composer to edit the sent mail/MMS again.
–
Delete
Deletes the sent mail.
No.
Mail screen menus (Sheet 4 of 5)
Sent mail
(Continued)
Draft
–
Save address
–
Add to phonebook Saves the phone number and mail address contained in the message part.
Saves the destination address to the phonebook.
–
Create message
Creates a new message to the highlighted Email address or phone number.
–
Copy message
Starts the copy mode in the message part.
–
Copy subject
Starts the copy mode in the subject part.
–
Play SMIL
Plays the SMIL content based on the content setting (see “Play SMIL” on page 42).
–
Browse SMIL
Plays the SMIL content manually (see “Browse SMIL” on page 42).
–
Protect On/Off
Protects or unprotects the received mail/MMS.
Displays the unsent and the saved draft mail/MMS.
Draft Options menu
Delete one
Deletes the selected mail/MMS.
Delete all
Deletes all mail/MMS.
Check new mail
Checks if there is any new i-mode messages (mail/MMS) for you stored at the mail server.
Mail settings
Changes the mail settings.
Edit header
Edits the header to be added at the beginning of a mail, and sets whether to add it
automatically.
☛ Highlight the checkbox ➔ to place a check, to automatically add a header.
☛ Highlight the text box ➔ to edit the header ➔ Edit the text ➔
Edit signature
Edits the signature to be added at the end of a mail, and sets whether to add it
automatically.
☛ Highlight the checkbox ➔ to place a check, to automatically add the signature.
☛ Highlight the text box ➔ to edit the signature ➔ Edit the text ➔
Reply marker
Edits the reply markers to be added when replying to a mail with quotations from the
original.
☛ Highlight the text box ➔ to edit the reply marker ➔ Edit the text ➔
Auto play
Sets whether to automatically play or display the sound, image or video file attached,
when you open the mail.
43
No.
Mail screen menus (Sheet 5 of 5)
Mail settings
(Continued)
Back
Auto reception
Sets whether to automatically retrieve a mail after receiving the incoming mail
notification.
2 When this setting is turned on your phone will automatically receive mail. If it is
turned off, you will have to manually retrieve from your i-mode service provider
using the Check new mail of iMenu screen (see “Check new mail” on page 43).
Receive
attachment
Sets the attachment file type that can be received.
☛ Highlight the file type ➔ to place a check.
Attachment data
Selects whether to receive Melody For i-mode (MFi) files attached to a mail.
Font size
Sets the font size to display the mail/MMS.
Check settings
Displays the values set to the above mail settings.
Back
Returns to the Mail screen.
Returns to the i-mode screen.
2 Depending on the conditions, some options may be displayed in gray and not be available.
i-mode glossary
The following defines the basic terms used in this section.
Term
Definition
Site (program)
An Internet contents page especially designed for i-mode users, which can be accessed from your i-mode top screen of your
IP.
Mail
Mail is the messaging service of i-mode. You can not only exchange messages with other cellphones, but also with PCs,
PDAs, etc.
MMS
Multimedia Messaging Service lets you send messages with image/video/sound files attached. The MMS type message is
also referred to as an MMS.
SMIL
The SMIL lets you combine text, sound, image and video into a slide, to create original slideshows. The message created by
SMIL is also referred to as a SMIL. A SMIL message is a kind of MMS message.
Access history Your phone stores up to 10 URLs you have accessed. You can refer to this list when you want to go to a web page you have
accessed recently.
Web page
44
An Internet contents page compatible to i-mode services, which can be browsed using your phone, including the sites
(programs).
Term
Definition
Bookmark
A bookmark contains the URL of a web page. You can save up to 50 bookmarks and use them for easier accesses.
Certificate
information
If you are displaying a Secure Sockets Layer (SSL) page designed to enable safe data transmission, you will be able to see
its certificate information.
IP
Information Provider. Your IP provides you the i-mode sites (programs).
Home page
A web page that is set in your profile as the page to connect to when you press and hold the Side up key from the standby
screen.
Saved pages
You can save up to 20 web pages in your phone memory, for quick off-line access.
Phonebook (M4)
Phonebook types
Your phone can have up to 7 directories stored on your SIM card and in your phone memory:
• Complete (a list of all the numbers stored in the ADN and FDN)
• Personal directories (ADN) in the SIM card
• Personal directories (ADN) in the phone memory
• Service dialling numbers (SDN)
• Fixed dialling numbers (FDN)
• Own number
• Voice mail number
2 When viewing any of the directories described, you can switch to the other directories (if your SIM card supports them) by pressing
2 The maximum number of phone numbers that can be stored on a SIM card is the total of the ADN, FDN and SDN directories.
2 When you activate the phonebook, the directory which you were referring to the last time will open.
Personal directory (ADN)
These numbers are known as abbreviated dialling numbers (ADN). There are two types of ADN, one is the phonebook stored in the phone memory
(the phonebook (Phone)) and the other is the phonebook stored on the SIM card (the phonebook (SIM)).
Phonebook (SIM)
• Up to 255 personal data can be stored in the SIM card.
• Each personal data contains a phone number, a name and a location number.
2 The number of phone numbers that can be stored on a SIM card depends on the SIM card capability.
45
Phonebook (Phone)
Up to 500 personal data can be stored in your phone memory. Each personal data is given a location number (1 to 500), and it can be allocated to a
group.
To each personal data, you can set the following:
• 7 phone numbers (Home, Mobile, Work, Data, Fax, Other phone x 2)
• 2 Email addresses
• 2 descriptive information
• LED colour, a CLI picture and a ringer tone
2 Up to 10 phone numbers can have a voice recognition recording allocated to them.
Fixed dialling numbers (FDN)
Fixed dialling numbers are a means of limiting which numbers can be called from your phone. With the FDN feature switched on (see page 46), you can
call with your phone the numbers you have stored in this phonebook and the emergency number only.
, Although FDN is supported by your phone, it must be present on your SIM card - check with your service provider.
Service dialling numbers (SDN)
The numbers stored in the SDN directory are pre-installed by your service provider. They will call numbers and services as agreed with your supplier
(e.g. customer enquiries, billing information, sportslines, weatherlines, etc.) and cannot be edited by you.
You will not be able to see the number which will be dialled but only the associated text title.
, Although SDN is supported by your phone, it must be present on your SIM card - check with your service provider.
Phonebook list screen
Personal data screen
SK2
Accessing your phonebook (M4)
You can store personal information in the phonebook of your phone or your SIM card.
46
Displaying a phonebook directory (M41)
☛
4 1 and the appropriate key for the desired directory or
➔
until the required directory is displayed ➔ Highlight the required personal data
Displaying information about your phonebook (M42)
☛
4 2 to display the information about your phonebook.
Call options (M43)
☛
4 3 to display the Call options screen.
/ For details on the Call options screen, see “Call options (M43)” on page 9.
Phonebook list Options menu
2 When editing the data in FDN, you will be prompted to enter PIN2 code.
2 Depending on the condition, some options may be displayed in gray and not be available.
☛
4 1 and the appropriate key for the desired directory or
until the required directory is displayed ➔ Highlight the required personal data
➔
No.
Phonebook list Options menu
Add new
Adds a new personal data.
Edit
Displays the data edit screen to edit the currently highlighted personal data.
Copy
Copies the currently highlighted personal data or the whole list to the following:
Current copy
☛ Press the appropriate key for the desired destination (SIM, Phone, FDN, own
Package copy
☛ Press the appropriate key for the desired destination (SIM, Phone or FDN) ➔
number or voice mail number) ➔ Key in the desired location number ➔
Key in the desired location number ➔
2 If you select the Phone, you have to select whether to just copy the first phone
number or copy all the registered numbers.
Move
Moves the currently highlighted personal data.
☛ Press the appropriate key for the desired destination (SIM, Phone, FDN, Own number or Voice mail
number) ➔ Key in the desired location number ➔
47
No.
Phonebook list Options menu (Continued)
Delete
Deletes personal data.
2 This option operates only when the phonebook (Phone) or phonebook (SIM) is displayed before pressing
to display the Phonebook list Options menu screen.
Groups
Delete current
Deletes the currently highlighted personal data.
☛ SK1 to complete the operation.
Delete all
Deletes all the data in the list.
☛ SK1 to complete the operation.
2 Only available for phonebook (Phone)/phonebook (SIM).
Displays the list of groups.
☛ Highlight the group you wish to edit ➔ SK1 and the appropriate number for the required option.
2 If the personal settings for the LED colour, CLI picture, or the ringer are also set, they have priority over
those of the Group settings.
Group n field
Info field
Sets the information on the selected group.
LED field
Selects the LED colour of the selected group.
☛ 1 to change the LED colour ➔ Highlight the desired colour ➔
set the change
➔ SK1 to
Selects the CLI picture of the selected group.
☛ 1 to change the CLI picture ➔ Highlight the desired picture ➔
set the change
➔ SK1 to
Picture field
Sound/Video field
Sort
Selects the ringer for the selected group.
☛ 1 for selecting the Sound or 2 for the Video ➔ Highlight the desired ringtone or
video ➔
➔ SK1 to set the change.
Sorts the personal data in the order of alphabets, or location number.
2 Sorting may take time depending on the number of personal data entries, the number of characters
contained in each entry and the type of language.
48
Renames the selected group name.
☛ Key in the name of the group ➔
Alphabetic
Sorts the personal data alphabetically.
2 You can jump directly to a name beginning with specific characters by pressing
the appropriate key (e.g. press 5 once to jump to names beginning with J, or twice
to jump to names beginning with K).
No.
Phonebook list Options menu (Continued)
Location
Searches for the personal data by the location number.
☛ Key in the desired location number ➔ SK1 to display the Phonebook list screen with the selected
personal data highlighted.
☛ Press to call the phone number displayed in the Help area.
2 When viewing the phonebook (Phone) list screen, use the and keys to display the other stored
numbers and Email addresses, if any, in the same personal data for the highlighted name. Also, when an
Email address is displayed in the Help area, you can press SK1 to create a new MMS or new Mail.
Location
Sorts the personal data in memory location number.
Show
Displays phonebook information.
▼
Sort (Continued)
▼
Summary
Displays the summary of phonebook contents.
Voice tag list
Displays the telephone numbers with the voice recognition tags recorded.
IR send
Sends the currently highlighted personal data to another device through the IR port.
/ See also: “IR send” on page 16.
Add desktop icon
Creates a desktop icon of the highlighted personal data.
2 When you have chosen the personal data which includes more than one phone number/Email address for a destination that allows only one
number to be stored, the Origin number screen will be displayed where you can choose item to be copied.
2 When you copy or move a phonebook entry to the phonebook (Phone), the Number type screen will be displayed where you can choose the
number type.
2 When copying a personal data from the phonebook (Phone) to other directories, only the items which are supported by the destination directory
can be copied.
2 If you choose to copy all phone numbers and there is any personal data which includes more than one phone number/Email address for a
destination that allows only one number stored, a new personal data for each number is created in the destination directory to store the number(s).
Adding a new personal data
☛
4 1 and the appropriate key for the directory or
➔ SK2 ➔ Select the directory to which you wish to store the personal data ➔ Enter
the name and other necessary information ➔ SK1 (see “Editing an existing personal data” below).
2 It is best to store numbers using the international number format.
Editing an existing personal data
☛
4 1 and the appropriate key for the desired directory or
➔
until the required directory is displayed ➔ Highlight the required personal data
49
2 For the phonebook (SIM) and FDN, only the name, phone number and the location number can be added or edited in the following procedures.
2 For the own number and voice mail number settings, only the name and phone number can be added or edited in the following procedures.
Adding/editing phone numbers, mail addresses & personal information
☛
☛
☛
Highlight the field you wish to edit or add information to ➔
Add the required number or information or make necessary changes to the selected field ➔
Highlight another field to make further changes, if required ➔ SK1 to save the changes.
You can also edit the Name, Phone number, Email address and Info fields by the above method.
Allocating a group
☛ Highlight the Group field ➔
➔ Highlight the group you wish to add the current personal data to ➔
➔ SK1 to save the changes.
Voice recall functions
Adding a Voice recall recording
☛ Highlight the Voice tag field ➔ ➔ 1
☛ Say the name you wish to record as a voice tag ➔ Say the name again for confirmation according to the displayed message.
Playing a Voice recall recording
☛ Highlight the Voice tag field ➔
➔2
Deleting a Voice recall recording
☛ Highlight the Voice tag field ➔ ➔ 3 ➔ SK1 to save the changes.
2 Up to 10 voice tags can be stored.
2 You can check the number of stored voice tag and list of those tags (see “Displaying information about your phonebook (M42)” on page 47).
Allocating a LED colour
☛ Highlight the LED colour field ➔
➔ 1 ➔ Highlight the desired colour ➔
➔ SK1 to save the changes.
Allocating a CLI picture
☛ Highlight the Picture field ➔ ➔ 1
☛ Highlight the desired CLI picture ➔ SK1 to preview the picture or to select the highlighted picture ➔ SK1 to save the changes.
2 A ✔ is displayed on the icon for which the item is currently selected.
2 If both the CLI picture and the Video are set, the Video will be displayed on the screen.
/ See also: “Pictures (M61)” on page 59.
50
Allocating a ringtone or video
☛
☛
☛
Highlight the Sound/Video field ➔
➔ 1 to display the ringtone list screen or 2 to display the video list screen
Highlight the desired ringtone or video ➔ SK1 to preview ➔ SK1 again to stop the preview and select, or SK2 to stop the preview without selecting
SK1 to save the changes.
A ✔ is displayed on the icon for which the item is currently selected.
See also: “Sounds (M64)” on page 61.
Allocating a location number
☛ Highlight the Location number field ➔
➔ Key in the desired location number ➔
➔ SK1 to save the changes.
Personal data Options menu
☛
4 1 and the appropriate key for the desired directory or
until the required directory is displayed
☛ Highlight the required data ➔ ➔ Highlight the required field ➔
No. Personal data Options menu
Call
Calls the highlighted phone number.
Create message
Creates an SMS/Mail/MMS to the highlighted phone number or Email address.
/ For details on the procedures to create new messages, see “Creating a message” on page 30, “Creating
a new mail” on page 33 and “Creating a new MMS” on page 34.
2 You cannot send an SMS to the Email address.
IR send
Sends the selected personal data to another device through the IR port.
Edit
Edits the selected personal data.
Copy
Copies the selected phone number(s)/Email address(es).
☛ Press the appropriate key for the desired destination (SIM, Phone, FDN, Own number or Voice mail
number) ➔ Key in the desired location number ➔
Move
Moves the currently highlighted personal data.
☛ Press the appropriate key for the desired destination (SIM, Phone, FDN, Own number or Voice mail
number) ➔ Key in the desired location number ➔
Delete current
Deletes the selected personal data.
Add desktop icon
Creates a desktop icon of the selected personal data.
/ See also: “Phonebook list Options menu” on page 47 for the operation of 4 (Edit), 5 (Copy), 6 (Move) and 7 (Delete current).
51
Scratchpad number
Your phone has a scratchpad facility that enables you to take down a phone number during a call and then make a call to it when you have finished. This
scratchpad number can be stored in memory for future use.
Noting & calling a scratchpad number
☛ During a call, key in the number to be placed in the scratchpad. It will be shown on your phone’s screen ➔
will still be displayed. Press
to dial the displayed number.
when the call is finished. The number
Voice mail (M417)
Voice mail function enables you to forward received calls to the Voice mail centre, and the caller can leave voice messages in your voice mail mailbox.
You may be notified by an icon on the standby screen if the caller leaves a voice message.
, The voice mail service is network dependent. Contact your service provider for details on your voice mail number.
Setting the Voice mail number
2 This function is available when the Voice mail number has not been set.
☛
4 1 7 ➔ Highlight the required line ➔
twice ➔
➔ key in the voice mail number ➔
➔ SK1 to save the change.
Forwarding a call to the Voice mail centre
☛ Set the voice mail centre number (see “Setting the Voice mail number” for details) ➔ Set up Call diversion (see “Call diversion (M161)” on page 11
for details). When you receive a call set to be diverted, the call will be diverted to the voice mail centre.
Retrieving a Voice mail
2 This function is available when the Voice mail number has been set.
☛
4 1 7 ➔ Highlight the required line ➔
2 You can also retrieve a voice mail by pressing and holding 1 from the standby screen.
2 To set up the line to call the voice mail centre, see “ALS setup” on page 20 for details.
52
Camera (M5)
Camera function enables you to take pictures or record videos and save them as Joint Photographic Expert Group (JPEG) files and 3rd Generation
Partnership Project (3GPP) files respectively. You can enjoy the picture and video files in many ways: send them attached to an MMS or Mail, set a
picture file as the wallpaper for your phone, etc.
Notes on using the camera
Handling the Camera
, Your phone’s camera is constructed using extremely high precision technology, but there may be lines or dots on the screen that
appear permanently dark or bright. Note also that the amount of noise in the image (white lines etc.) may increase noticeably when you
take pictures in dimly-lit places.
, Be careful not to apply force to the lens when closing your phone. This could damage the lens.
2 Fingerprints or grease on the lens can result in focusing problems or dark images. Wipe the lens clean with a soft cloth before use.
2 The image quality may be degraded after your phone has been left for a long period in a warm place.
2 Exposing the camera to direct sunlight for a long period could discolour the camera’s internal colour filter and cause discoloured images.
2 Camera mode is automatically cancelled if none of the phone’s keys are pressed for 3 minutes or longer.
Precautions when taking pictures/recording videos
2 You cannot switch the camera’s shutter sound off. The shutter makes a clicking sound when you take a picture or start/end a video recording,
even when the phone is in Meeting mode.
2 Avoid camera shake. Moving the phone when you take a picture will result in a blurred image. Hold the camera firmly to keep it still when you take
a picture, or use the auto timer to take the shot.
2 As there is a slight delay from the time you press the shutter ( ) until the picture is actually taken, do not move the camera until you hear the
shutter sound.
2 If taking a picture with not enough light, try to hold the phone still as much as possible, and for a longer period of time after the shutter sound: the
shutter speed may be slower in a darker environment.
2 Note that if you attempt to shoot directly into a strong light source, such as the sun, another bright light or the high reflecting target with strong
light, the image may contain washed-out white highlights or be disrupted.
2 While recording, be careful not to cover the mouthpiece of your phone as it is used as the microphone to record sound along with the video.
54
Copyright information
2 Images and videos shot or recorded on your phone cannot be used in ways that infringe copyright laws without the consent of the copyright holder,
unless intended only for personal use. Note that some restrictions apply to the photographing of stage performances, entertainments and exhibits,
even when intended purely for personal use.
2 Users are also asked to note that the transfer of images protected under copyright laws is only permissible within the restrictions imposed by those
copyright laws.
, Be considerate of other people’s privacy when you take a picture or record a video using the camera of your phone and send it to others.
Taking a picture (M51)
☛
☛
☛
To activate the camera function, press and hold Side up or press
51
Look into the camera view finder screen and adjust the camera position to place the target on the screen.
You can switch the camera view finder screen between the main-LCD and the 2nd-LCD by pressing .
You can take a picture while the phone is closed.
Hold the phone still ➔ To use the shutter, or Side up ➔ Check the picture ➔ If successfully taken, ➔ Saved as a JPEG file in the Pictures
After taking a picture, pressing SK1 will display the Compose mail screen, and pressing SK2 will discard the picture.
The default file name for the picture is the date, month, year and sequence number. When you take pictures in burst mode, the saved files will be
named by the default file names plus a consecutive two-digit number at the end.
2 If a call comes in while you are checking or saving a photographed image, image storage is cancelled. When this occurs, the next time you select
camera function a message appears to say that you have an image that was not stored, allowing you to check and store the image.
2 Before taking a picture, you can switch to the video camera function by pressing SK2. This use of SK2, however, is invalid if the self-timer function
is activated.
▼
▼
Operations when taking a picture
☛ To turn the light on or off, SK1 or Side down
2 Take care not to hold the light too close to your or other people’s eyes when the light is lit.
☛ To zoom in and out, ▲ or ▼
2 You can also select x1,x2,x3 or x4 magnification from the Zoom setting on the Camera Options menu.
☛ To turn on/off the camera view finder on the full screen, press #.
2 Depending on the photo size, there may be parts not seen on the full screen view finder display in the saved picture.
☛ To control the brightness level of the picture, or
55
Camera Options menu (before taking a picture)
No. Camera Options menu (before taking a picture)
Single mode/Burst mode
Switches the shooting mode to Single/Burst mode (serial shooting).
Shoot environment
Changes the camera settings to suit the environment. Select from Standard, Person, Room or Darkness.
Effect
Applies special effect to the picture. Select from Off, Sepia, Monochrome, Negative film, or Posterization.
Photo size
Sets the picture size to Sub-QCIF (128x96), QCIF (176x144), Wallpaper (176x220), CIF (352x288), or
VGA (640x480).
2 You cannot use the Zoom function for VGA, and you can select only x1 or x2 magnification for
Wallpaper and CIF.
2 You cannot use the Frame and Burst mode functions for CIF and VGA.
2 You cannot use the Full screen function for Sub-QCIF and QCIF.
2 If you select Wallpaper, CIF or VGA, the picture on the camera view finder screen will be displayed as
a smaller picture than the actual size. Also on the camera view finder screen, the picture size before
shooting differs from the size after shooting.
Image quality
Sets the image quality to Super fine, Fine, Normal, Economy or Super economy.
Frame
Selects whether to use a frame when taking pictures, and sets the desired frame with which a picture will
be taken.
Self timer/Self timer cancel Activates or deactivates the self-timer function.
Sound
Pictures
Selects the shutter sound and self timer sound.
Displays the Pictures screen.
Other settings
Add desktop icon:
Automatic save:
Light:
Brightness:
Zoom:
Thumbnail view:
Video:
Flicker control:
Switch finder
Creates a desktop icon of the camera function on the standby screen.
Selects whether to save taken pictures automatically or not.
Turns the light on or off.
Changes the brightness level of the picture between -2 and +2.
Changes the zoom magnification from x1, x2, x3 or x4.
Selects whether to display the pictures taken in the Burst mode as thumbnails or
slides.
Activates the video function.
Selects 50Hz, 60Hz or Auto to prevent flickers when taking a picture under a
fluorescent light.
Selects whether to display the camera view finder on the main-LCD or the 2nd-LCD.
2 On the 2nd-LCD view finder, the object appears as a mirrored image.
56
No. Camera Options menu (before taking a picture) (Continued)
Full screen
Turns the Full screen on or off.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Camera Options menu (after taking a picture)
No.
Camera Options menu (after taking a picture)
Save current
Saves the currently displayed picture.
Save all
Saves all pictures taken in Burst mode.
Create message
Sends the file attached to a mail (see page 33).
Set as wallpaper
Sets the picture as the wallpaper.
Display as normal image/
Display as mirror image
Selects whether to display the taken picture as a normal or mirror image on the main-LCD
preview screen when you select the 2nd-LCD as a camera view finder.
Save as mirror image
Saves the picture as a mirror image when you select the 2nd-LCD as a camera view finder.
Thumbnail view
Selects whether to display the pictures taken in the Burst mode as thumbnails or slides.
Automatic save
Selects whether to save taken pictures automatically or not.
Pictures
Opens the Pictures folder in My data.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Recording a video (M52)
Recording a video
, To record a video, keep your phone open at all time. Unlike taking a picture, you cannot record a video while the phone is closed.
☛
☛
☛
Press and hold Side up then SK2, or press
5 2 ➔ Look into the view finder screen and adjust the camera position.
You can switch the camera view finder screen between the main-LCD and the 2nd-LCD by pressing .
To start recording, or Side up ➔ The progress bar will show the ratio of how much you have recorded already.
While recording, be careful not to cover the mouthpiece of your phone as it is used as the microphone to record sound along with the video.
While recording, the key tones are deactivated.
Move the camera to capture the scenes you want ➔ To stop recording, or the Side up
After the set video file size is reached, the recording automatically stops.
After recording, pressing SK1 will replay the recorded video, and pressing SK2 will display a new MMS editor screen with the video file attached
(the video file size must be set to Mail).
57
2 While replaying, you can fast forward by pressing
▼
▼
or rewind by pressing . Pressing SK1 or will stop the fast forwarding/rewinding. Then,
pressing SK1 will restart and continue the replay.
2 You can discard the recorded video by pressing or CLR.
☛ To save the recorded video, . The recorded video is saved as a 3GPP file in the Videos - My movie folder in My data (see page 59).
2 Pressing # before/while playing a video file will enlarge the replay screen size, and pressing # will return the screen size to normal.
2 The video file will be saved as a file named from the date, month, year and sequence number.
/ For the operations while replaying the video, see “Videos (M62)” on page 60.
/ For the operations while recording a video, see “Operations when taking a picture” on page 55.
2 If a call comes in while you are checking or saving a video, video storage is cancelled. If this occurs, the next time you select camera function a
message appears to say that you have a video that was not stored, allowing you to check and store the video.
2 Before recording a video, you can switch to the camera function by pressing SK2. This use of SK2, however, is invalid if the self-timer function is
activated.
▼
▼
Operations when recording a video
☛ To turn the light on or off, SK1 or Side down
2 Take care not to hold the light too close to your or other people’s eyes when the light is lit.
☛ To zoom in and out, ▲ or ▼
☛ To control the brightness level of the picture, or
Camera Options menu (before recording a video)
No. Camera Options menu (before recording a video)
58
Shoot environment
Changes the camera settings to suit the conditions. Select from Standard, Person, Room or Darkness.
Effect
Applies special effect to the video. Select from Off, Sepia, Monochrome, Negative film, or Posterization.
Screen size
Sets the video screen size to Sub-QCIF (128x96) or QCIF (176x144).
Video file size
Sets the video file size to Fast mail or Long mail.
Quality
Sets the video quality to High or Standard.
Self timer/Self timer cancel Activates or deactivates the self-timer function.
Self timer sound
Selects the self timer sound from Sound1, Sound2 or Sound3.
Videos
Opens the Videos folder in My data.
Other settings
Creates a desktop icon of the camera function on the standby screen, changes the Light, Brightness and
Zoom settings, activates the camera function, and selects the frequency or auto setting of the Flicker
control.
Switch finder
Selects whether to display the viewfinder on the Main-LCD or the 2nd-LCD.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Camera Options menu (after recording a video)
No.
Camera Options menu (after recording a video)
Save
Saves the currently displayed video.
Create message
Sends the file attached to a mail message (see page 33 and see page 34).
Set as wallpaper
Sets the video as the wallpaper.
Full screen
View detail
Displays detailed information on the selected video.
Videos
Opens the Videos folder in My data.
Selects whether to enlarge the replay screen size.
2 You cannot use the Full screen function for QICF.
My data (M6)
Using My data, you can playback sound and music (MP3) files, or display pictures and videos downloaded from the Internet or captured with the camera
function of your phone.
Pictures (M61)
The Pictures function allows you to display images and animations, which were obtained with the camera function of your phone, received as a file
attached to MMS messages, or downloaded from the Internet. The images can also be edited using this function. From the Pictures function you can
also attach images and animations to MMS messages you compose. There are five pre-set folders: Photo, Preset, Download, Frame and Stamp.
▼
Cutting the image
☛ Highlight or display the image file you wish to edit ➔
screen.
☛ Move the frame position ➔
▼
▼
Displaying the Pictures view screen
☛ ▼ 1 or
6 1 ➔ Highlight a folder ➔ or ➔ Highlight an image file you wish to display ➔
☛ To display the previous/next image file, ▲ or ▼
2 When the flat view function is activated, the Pictures folder top screen is not displayed. The list of all the stored image file is displayed.
2 If you wish to move to another hierarchy folder while the Thumbnail view is turned off, use and
1 3 ➔ Select the image size ➔ A frame indicating the cut area appears on the preview
➔ SK1 if the image is favorable
59
2 When you select Free, a cross indicator appears on the preview screen. Move it to the point to start a frame and
expand the frame into the required size and
to confirm.
Reducing the image size
☛ Highlight or display the image file you wish to edit ➔
to confirm the position. Then,
1 4 ➔ Select the image size ➔ SK1 if the image is favorable
Rotating the image
☛ Highlight or display the image file you wish to edit ➔
1 5 ➔ SK1 to rotate the image 90 degrees clockwise
☛ Keep pressing SK1 until the image is at the required angle ➔ to confirm
Decorating the image with stamps
☛ Highlight or display the image file you wish to edit ➔
16
☛ To apply a marker stamp, 1 ➔ Highlight the required stamp ➔ SK1
☛ To apply a text stamp, 2 ➔ Key in the text (or insert emoticons: see “Insert object” on page 31 for details) ➔
➔ The text stamp position is
displayed in centre
☛ Move the stamp position ➔ to confirm ➔ The text stamp preview is displayed again. Repeat applying if necessary. ➔ SK1 when finished
applying the text stamp (the text stamp preview will not be applied this time)
Adding a frame to the image
☛ Highlight or display the image file you wish to edit ➔
various frames by ▲ and ▼ ➔
to confirm.
1 7 ➔ Highlight a frame ➔
to preview the resulting image ➔ Scroll through the
Saving the edited image
☛ After any edition, SK1 or to save the edited image ➔ Select the Save Quality ➔ Edit the name (if required) ➔
Videos (M62)
In the following section, how to playback video files (videos) stored in your phone is described. You can either record videos using your phone, download
them from the Internet, receive them attached to MMS messages. There are two pre-set folders: My movie and Download.
▼
60
▼
▼
Replaying the video files
☛ ▼ 2 or
6 2 ➔ Highlight a folder ➔ or ➔ Highlight a video file you wish to replay ➔ ➔ The video file will be replayed
2 When the flat view function is activated, the Videos folder top screen is not displayed. The list of all the stored video files is displayed.
2 If you wish to move to another hierarchy folder, use and
2 Pressing # before playing a video file will enlarge the replay screen size, and pressing # again will return the screen size to normal.
2 For the definitions of the icons displayed while replaying, see “LCD and displayed icons” on page vii.
▼
▼
Operations while replaying video
☛ To stop, SK2
☛ To pause, SK1 ➔ While pausing, SK1 again to restart and continue the replay.
☛ To fast forward/rewind, or ➔ SK1 or will stop the fast forwarding/rewinding.
☛ To adjust the volume, Side keys.
☛ To display the previous/next file, ▲ or ▼
Music (M63)
In the following section, the procedures to display and play your music files from the Music folder are described.
2 For details, see “Music player (M81)” on page 66.
Selecting and playing a music file
☛ ▼ 3 or
6 3 ➔ Highlight the music file you want to play ➔
2 When the flat view function is activated, the Music folder top screen is not displayed. The list of all the stored music files is displayed.
Operations while playing a music file
☛ To stop, SK2
☛ To adjust the volume, Side keys.
☛ To replay the previous/next file, ▲ or ▼
Sounds (M64)
In the following section, procedures to playback and delete desired sound items are described. There are three pre-set folders: Download, Preset and
Voice memo.
▼
▼
▼
Selecting and playing sound
☛ ▼ 4 or
6 4 ➔ Highlight a folder ➔ or ➔ Highlight a sound file you wish to replay ➔
2 When the flat view function is activated, the Sounds folder top screen is not displayed. The list of all the stored sounds files is displayed.
2 If you wish to move to another hierarchy folder, use and
2 When a folder is highlighted, you cannot use SK1.
61
Operations while playing sound
☛ To stop, SK2
☛ To adjust the volume, Side keys.
☛ To replay the previous/next file, ▲ or ▼
File selector Options menu
☛ Display the Pictures/Videos/Sounds list screen ➔
No.
File Selector Options menu
Edit item
Rename item:
Set protection:
Cut:
Reduce:
Rotate:
Stamp tool:
Frame:
62
Edits the User title or File name of the selected folder or file.
Changes the protection settings of the selected folder or file.
Cuts the selected image into Sub-QCIF (128x96), QCIF (176x144), Wallpaper
(176x220), or Free.
Reduces the selected image to fit within Sub-QCIF (128x96), QCIF (176x144), or
Wallpaper (176x220)
Rotates the selected image.
Adds a marker or text stamp on the selected image.
Sets a frame to the selected image.
Use item (Pictures)
Uses the selected file by setting as wallpaper or adding to desktop.
Set as wallpaper:
Sets the selected image to be the main-LCD wallpaper.
Add desktop icon:
Creates a desktop icon for the selected image on the standby screen.
IR send:
Sends the selected image through the IR port to other devices or a cellphone.
Use item (Videos)
Uses the selected file by setting as ringtone or as wallpaper.
Set as ring tone:
Sets the selected video to be the ringer tone.
Set as wallpaper:
Sets the selected video to be the main-LCD wallpaper.
IR send:
Sends the selected video through the IR port to other devices or a cellphone.
Use item (Sounds)
Uses the selected file by setting as SMS or MMS tone.
Set as ring tone:
Sets the selected sound to be the ring tone.
Set as SMS tone:
Sets the selected sound to be the SMS tone.
Set as Mail tone:
Sets the selected sound to be the Mail tone.
IR send:
Sends the selected sound through the IR port to other devices or a cellphone.
Create message
Sends the file attached to a mail.
Delete item
Deletes the selected file and folder.
Delete all
Deletes all the files in the current folder.
No.
File Selector Options menu (Continued)
Copy item
Copies the selected file to any folder.
Move item
Cuts the selected file and pastes it into any folder.
Move all
Cuts all the files in the current folder and pastes them into any folder.
Create folder
Creates a new folder under the current folder.
Storage detail
Displays the current storage information of your phone memory.
View detail
Displays the details of the selected folder or file.
2 You can also display the details on the highlighted folder or file by pressing
Options menu.
Options
without displaying the
Sorting order:
Info column:
Sorts the files by date or alphabetically.
Sets whether to display the second column on the list screen, and the information to
be shown there.
None: No second column showing
Size: Approximate size of the file
Type: File type
2 You can also change the information on the second column by pressing # without displaying the Options
menu.
Thumbnail view:
Displays the files as thumbnails.
Flat view:
Displays the list of all the stored image files regardless of the folder hierarchy.
Save options:
Saves the current option settings.
Reset options:
Resets the option settings.
2 Depending on the conditions, some options may be displayed in gray and not be available.
2 Neither protected data, preset data nor data in sub-folders can be deleted or moved.
63
Java™ (M7)
You can download Java™ applications (games etc.) from i-mode sites and run them on your phone.
Programs (M71)
How to run software
▼
▼
To run a software (Java™ application), perform the following.
☛
7 1 or press and hold Softkey 2➔ Highlight an application containing the software you want to run ➔ or
➔ The software menu will
be displayed.
2 When you display the Java™ applications list screen for the first time after downloading a program(s), it may take a while for your phone to verify
the program(s). A message will be displayed during this process, and you may activate the program(s) after it is completed.
☛ Highlight the software you want to run ➔ or ➔ The software will start.
, After downloading the software, always make sure that you check the downloaded program is displayed in the Applications screen.
2 When you display the Applications screen for the first time after downloading a program(s), it may take a while for your phone to verify the
program(s). A message will be displayed during this process, and you may activate the program(s) after it is completed.
, Do not remove the battery while the software is running as data to that point may not be saved.
2 While the software is active, the Java™ operation icon is displayed (see page vii).
Java™ System menu
☛
7 1 ➔ Highlight an application ➔
No. System menu
Description setting Selects whether to display the information of the selected application.
Delete all
Deletes all the applications.
Storage status
Displays the status of Java™ applications currently stored in your phone.
Trace info.
Displays the trace information.
About
Displays the information of the Java™ system.
2 Depending on the conditions, some options may be displayed in gray and not be available.
or
▼
Application menu
☛
7 1 ➔ Highlight an application you want to run ➔
No.
64
➔ SK 1
Application menu
Properties
Displays the information of the selected software.
No.
Application menu
Upgrade
Make an enquiry on whether the selected software has an upgrade. If there is, starts downloading
the data.
Delete
Deletes the selected software.
Network connection
Permits/prohibits the Java™ application software to connect to the network.
☛ Press 1 to enable the software to connect to the network.
☛ Press 2 to disable the software to connect to the network.
Auto start setting
Enables or disables the automatic start of a complying Java™ application.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Prog backlight (M72)
You can set the backlight mode of your phone.
☛
7 2 ➔ 1 to set your phone to follow the normal backlight setting, or press 2 to let the backlight be controlled by the Java™ application.
2 If you set your phone to follow the normal backlight setting, the current power save settings will be active (see “Power saving (M15)” on page 23).
2 When the software is not running, the backlight operation depends on your phone’s backlight settings.
65
l
Accessory (M8)
Music player (M81)
This feature allows you to play MP3 music files saved in the Playlist. You can add MP3 music files saved in the Music folder of My data to the Playlist
(see “My data (M6)” on page 59). You can also create a desktop icon of the Music player function on the standby screen.
☛
8 1 ➔ Highlight a music file and SK1 to play and SK2 to stop.
2 If there are no music files saved in the Playlist, the Playlist screen will be displayed.
Music player Options menu
☛
81
No.
Music player Options menu
Playlist
Displays a list of MP3 music files.
☛
to add, move, delete or display the properties of the selected music file, or SK1 to add an MP3 music
file.
2 You can save up to 30 MP3 music files in the Playlist.
Play mode
Normal:
Repeat all:
Repeat one:
Equalizer
Selects from Rock, Jazz, Pop and Off to obtain the desired tone.
2 The selected Equalizer setting applies to all the music files in the Playlist.
Add desktop icon Creates a desktop icon of the Music player function on the standby screen.
Plays all the music files in order from top to bottom of the Playlist once.
Plays all the music files in the Playlist repeatedly.
Plays the selected music file repeatedly.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Playlist Options menu
☛
81
No.
66
Playlist Options menu
Add item
Adds a music file to the Playlist.
Move item
Moves the highlighted music file in the Playlist.
Delete item
Deletes the highlighted music file from the Playlist.
Delete all
Deletes all the music files from the Playlist.
No.
Playlist Options menu (Continued)
View detail
Displays the properties (file name, title, artist name and recording time) of the highlighted music file.
Calculator (M82)
You can perform addition, subtraction, multiplication and division with the calculator. It also has a memory function.
☛
82
2 The calculator can display a result of up to 9 digits. If a calculation results in a number exceeding the maximum, the screen displays error in the
calculation field.
Calculator Key Assignment
For calculator function, the keys are assigned different functions. The following shows the key assignment:
Operation
Addition (+)
▲
Multiplication (×)
Equals to (=)
SK1
Key
Operation
▼
▼
Key
Subtraction (–)
▼
Division (÷)
SK2
Memory Recall (2nd)/Memory Cancel
Memory Addition (2nd)/Memory Store
Percent (%)
Inversion (±)
Exit calculator
Decimal Point (.)
CLR
Delete digit (if held, all clear)
Clock alarm (M83)
This feature enables you to switch the clock alarm function on/off and to set the time, repetition and alarm tone.
Turning the alarm on/off
☛
83
Clock alarm setting
On/Off
Turns on or off the alarm.
Set time
Sets the time (in 24 hour format) at which the alarm will sound.
Set alarm tone
Sets the melody to be played when the alarm occurs (optional). See “Sounds (M64)” on page 61
67
Clock alarm setting (Continued)
Alarm repeat
Selects alarm repeat for once, daily or day of the week.
2 You can select more than one day of the week at the same time.
2 You can remove the check by highlighting and pressing again.
Enter alarm text
Sets the message (e.g. Wake up!) which is displayed when the alarm occurs (optional).
☛ When all settings are done, SK1 to save the setting.
2 The selected melody will be played when the alarm occurs if the ringer is turned on based on the current phone mode. If vibration is turned on, you
will be notified of the alarm by vibration.
2 The phone follows the volume and vibration settings of the currently selected phone modes.
2 Even if the phone has been switched off, the phone automatically switches itself on and sounds the alarm or vibrates at the specified time.
2 You can stop the alarm tone or vibration by pressing any key.
Scheduler (M84)
Scheduler enables you to enter reminders and appointments for particular time and date.
Adding a new event
☛
8 4 ➔ Highlight the day ➔
to display the day’s schedule list screen (if any) ➔ SK1.
Scheduler setting
Event date/time
Sets the day, month, year and time (in 24 hour format) of the event.
Description
Sets the event description (optional).
Repeat
Selects repeat for One time only, Daily, Weekly or Monthly.
Reminder
Turns on or off the reminder.
Reminder tone
Associates a reminder tone with an event.
2 You can set the reminder tone only when the Reminder is turned on.
Private
Sets the event as a private event.
☛ Place a check to set the event as a private event. To set the event as a public event, do not place a check.
☛ When all settings are done, SK1 to save the setting.
2 The selected melody will be played when the scheduled event occurs if the ringer is turned on based on the current phone mode. If vibration is turned
on, you will be notified of the event by vibration.
2 The phone follows the volume and vibration settings of the currently selected phone modes.
68
2 If the phone has been switched off, the phone does not switch itself on to sound the reminder or vibrate at the specified time.
2 You can stop the reminder tone or vibration by pressing any key.
2 If the event is a private event, the reminder will be sound at the specified time but the entered description will not be displayed on the LCD. You are
prompted to enter the security code to view the details of the private event.
Viewing the scheduled events
☛
8 4 ➔ Highlight a day
☛ to display the day’s schedule list screen (SK1 to display the previous monthly/weekly view screen or SK2 to display the next monthly/weekly
Scheduler Options menu
☛
8 4 ➔ Highlight the day ➔
No.
or )
▼
view screen).
to display the detail screen of the highlighted schedule. (To display the previous/next day’s schedule list screen,
▼
☛
to display the day’s schedule list screen (if any) ➔ Highlight the required scheduled event ➔
Scheduler Options menu
Add new
Adds a new entry.
Edit
Edits the highlighted event.
Copy
Copies the highlighted event.
Delete
Deletes event(s). Press the appropriate keys for the event category (the currently selected event, all the public/
private events on the day, all the past public/private events, all the public/private events or all the events) to
delete.
Go to date
Displays the selected date.
Monthly calendar/ Switches the weekly view screen to the monthly view screen, or the monthly view screen to the weekly view
Weekly calendar screen.
View summary
Displays a summary of all the events.
View events
Displays the events. Press the appropriate keys for the event category (Public only, Private only or All) to display.
2 You are required to key in the security code to display the private events or all events.
IR send
Sends the selected schedule through the IR port to other devices or a cellphone.
2 The IR send function is not available during a call.
2 Depending on the conditions, some options may be displayed in gray and not be available.
69
ToDo list (M85)
This feature allows you to set up to 100 ToDo tasks that should be finished by a certain date. You can choose to display either all ToDo tasks, or those
just finished or unfinished. Each task is identified by a description (of up to 256 characters) and its start/due date.
Adding a new ToDo task
☛
8 5 ➔ Highlight the list ➔
➔ SK1
ToDo list setting
Start date
Sets the day, month and year to start the ToDo task.
Due date
Sets the date to end the ToDo task. Key in the date or press the appropriate key for the date.
2 If you select to key in the date yourself, input the day, month and year of the date to end the Todo task, then SK1.
Description
Sets the ToDo task description (e.g. Pay the rent).
Category
Sets the category (Business, Personal or Other).
Priority
Sets the priority (Normal, Low or High).
Private
Sets the ToDo task as private.
☛ When all settings are done, SK1 to save the setting.
When a ToDo task is completed
☛
8 5 ➔ Highlight the list ➔ ➔ Highlight the task ➔
Viewing ToDo task details
☛
8 5 ➔ Highlight the list ➔
➔
1 and 1, or SK2 to save the task as completed.
➔ To view the details of the previous or next ToDo task in the list,
▼
▼
➔ Highlight the required ToDo task ➔
or
☛ To edit the currently displayed task, SK1.
ToDo Options menu
☛ To display the ToDo Options menu,
8 5 ➔ Highlight the list ➔ ➔ Highlight the required ToDo task ➔
☛ To display the ToDo detail Options menu,
8 5 ➔ Highlight the list ➔ ➔ Highlight the required ToDo task ➔ Highlight a ToDo entry ➔
➔
70
Column L shows the ToDo options menu, and column D shows the ToDo detail Options menu.
ToDo Options menu
Add new
Adds a ToDo task based on the highlighted ToDo task (see “Adding a new ToDo task” on page 70, from the
second step).
–
Status
Changes the completion status of the highlighted ToDo task.
Edit
Edits the highlighted ToDo task (see “Adding a new ToDo task” on page 70, from the second step).
–
Delete
Deletes ToDo task(s). Press the appropriate keys for the ToDo task category (the currently selected ToDo task,
all the public/private ToDo tasks, all the completed public/private ToDo tasks or all the ToDo tasks) to delete.
–
Delete current
Deletes the highlighted ToDo task.
–
Display filter
Sets the type(s) of ToDo tasks to be displayed by selecting the desired filter option (None, Incomplete or
Complete).
–
Sort list
Displays a list of ToDo tasks rearranged according to the selected sort key (Due date, Category, Priority, or
Status).
–
View summary
Displays the number of unfinished and finished tasks and how many more tasks can be created.
IR send
Sends the selected ToDo task through IR port to other devices or a cellphone.
2 The IR send function is not available during a call.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Notepad (M86)
Notepad function allows you to record and store a note as a text file.
Creating a new memo (M861)
☛
8 6 1 ➔ Key in text ➔ to save the entry as a text file. The first few words are displayed on the text list screen.
Displaying a memo (M862)
☛
8 6 2➔ Highlight the list ➔
to preview the memo, or SK1 to edit the memo
71
Notepad Options menu
☛
8 6 2 ➔ Highlight the a text (note) ➔
No.
Notepad Options menu
Edit item
Changes the protection settings of the selected file.
Rename item:
Edits the User title or File name of the selected file.
Set protection:
Changes the protection settings of the selected folder or file.
Use item
Add desktop icon:
Creates a desktop icon of the selected file on the standby screen.
IR send:
Sends the selected file through IR port to other devices or a cellphone.
2 The IR send function is not available during a call.
Create message
Creates a new SMS/Mail with the highlighted text (note) in the Message field.
Delete item
Deletes the selected file or folder if it is unprotected.
Delete all
Deletes all the notes unprotected from the list.
Copy item
Copies the selected note.
Move item
Cuts and pastes the selected note.
Move all
Cuts and pastes all the notes in the current folder.
Create folder
Creates a new folder under the current folder.
Storage detail
Displays the current storage information of your phone memory.
View detail
Displays the detail of the selected file.
Options
Sorting order:
Info column:
Flat view:
Save options:
Reset options:
Sorts the files by date or alphabetically.
Sets whether to display the second column on the list screen, and the information to
be shown there.
None: No second column showing
Size:
Approximate size of the file
Type:
File type
Displays the list of all the stored files regardless of the folder hierarchy.
Saves the current option settings.
Resets the option settings.
2 Depending on the conditions, some options may be displayed in gray and not be available.
72
Voice memo (M87)
Voice memo function allows you to record up to 60 seconds of sound/voice, using your phone’s microphone.
Recording/playing voice memo or setting speaker
☛
87
No.
Voice memo setting
Record
Records a voice memo.
☛ SK1 to start recording.
2 You can finish recording and save the data as a file by pressing SK2 even before the recording is
completed.
Play
Plays a voice memo or recorded call.
☛ Highlight a voice memo ➔ SK1 to start playing and SK2 to stop playing.
/ See “Recording a call” on page 9 for how to record a call.
Speaker setting
Selects between speaker and earpiece to play the voice memo.
☛ 1 for the Speaker, or 2 for the Earpiece.
/ See also: “Sounds (M64)” on page 61.
Currency (M88)
Currency function allows you to convert an amount of money in one currency to another.
Converting currency
☛
88
Currency setting
From
Sets the source currency code.
To
Sets the destination currency code.
Exchange rate
Sets the exchange rate.
☛ If you wish to change the exchange rate, CLR to delete the displayed exchange rate and key in the required number
(for decimal point, SK1).
☛ To clear the rate in order to re-enter it completely, SK2.
Amount
Sets the amount of money you wish to convert (for decimal point, SK1).
73
2 If you have made a mistake in entering the amount, CLR to delete individual number or SK2 to clear the entire screen, and then start again.
Resetting the currencies
☛
8 8 SK2
Infrared (M89)
Infrared function enables you to receive data (phonebook/picture/video/sound excluding MP3/schedule/ToDo list/note data) from other devices, or a
cellphone of the same model via the infrared port. This function also enables you to use your phone as a modem for your PC via the infrared port to
establish a dial-up connection to an Internet service provider
2 This function is not available during a call.
/ For details, see “IR Data Exchange” on page 16.
☛
89
No.
Infrared setting
IR receive
IR modem
Receives data via infrared.
☛ After the data has been received, SK1 to save the received data.
Uses your phone as a modem for your PC via infrared.
2 After the IR connection is established, the idle screen with an Infrared icon and a General Packet Radio
Service (GPRS) icon will be displayed for GPRS connection, and the Circuit Switched Data (CSD) connection
screen will be displayed for CSD connection.
, Your phone consumes a lot of battery power when used as a modem. After using your phone as a modem, be sure to deactivate the modem
function from your PC or press (for the CSD connection only). When the modem function is deactivated, the idle screen will be displayed
without the Infrared icon and GPRS icon.
74
Index
Numerics
2nd-LCD
3GPP
4 way navigation key
viii
54
AC adapter
Accepting an incoming call
Access history
45
Accessory
66
ADN
7, 46
Alarm volume
22
ALS setup
20
Animation
59
Any key answer
20
AOC
10
Auto answer
22
Auto redial
12
Band
Bar calls
Basic calls & phone use
Battery charging
Battery level icons
Battery pack
Bookmark
Broadcast messages
13
25
vii, 3
45
32
Calculator
Call diversion
Call lists
67
11
10
Call waiting and holding
Camera
Recording a video
Taking a picture
Car mode
CB
Certificate information
CLI
Clock
Clock alarm
Clock orientation
Clock/Event display
Colour style
Contrast
Correcting mistakes
CSD
Currency
12
54
57
55
21
32
45
21
67
23
23
22
23
74
73
21
21
18
10
23
33
Date
Date format
Desktop icons
Dialled calls list
Direction
Download
Earphone
Earphone type
Emblem
Emergency calls
Ending a call
22
21
Fast dialling
FDN
Flicker control
Fold answer
Frame
Function key LED
47
56
20
25, 60
23
General care
GPRS
Greetings
Groups
GSM
74
22
49
vii
icons
i-mode
Certificate information
i-mode menu screen
i-mode operations
i-mode screen
IP
Mail
MMS
Site (program)
Web page
i-mode menu screen
32
37
27
23
12
12
45
16
74
74
Java™
JPEG
64
54
Headset
Holding a call
Homepage
i-mode operations
i-mode screen
Inbox
Incoming call No.
International calls
International dialling codes
IP
IR
IR modem
IR receive
21
46
Key allocations
Key tone
Keypad shortcuts
15
22
vi
vii
32, 40
45
37
32
37
45
45
45
45
45
37
Language
Last call duration
Last number redial
LCD
LED
Low battery alarm
21
iv
21
Mail
Mail screen
Mail tone
Mail tone volume
Main menu
45
40
22
22
ix
75
Main menu style
Main-LCD
Making basic calls
Meeting mode
Menu functions
Menu shortcuts selection
Message
MFi
Missed calls list
MMS
MMS messages
Multi-party calls
Music
Music player
Mute
My data
22
vii
21
ix
iii
26
45
10
45
26
61
66
59
Network selection
Normal mode
Normal text (ABC) input
Notepad
Numeric input
13
21
15
71
15
One-touch dial
Options menu (during a call)
Own phone number display
Parts and functions
Phone lock
Phone modes
Phonebook
Pictures
PIM
76
24
21
46
59
24
PIN activate
PIN code
PIN2 code
Pocket mode
Power saving
Power saving level
Preparing the phone
PUK
24
4, 24
24
21
23
23
24
Reading a message
Received calls list
Recording a call
Redial blacklist
Redial the last number
Rejecting an incoming call
Reset settings
Ring silencer
Ringer
Ringer volume
Roaming
27
10
10
25
20
22
22
13
Safety precautions
Saved pages
Scheduler
Scratchpad number
SDN
Service tone
Settings
Shortcuts selection
Side key lock
SIM
SIM card
SIM card insertion
46
68
53
47
22
20
ix
20
SIM card removal
Site (program)
SMIL
SMS messages
SMS tone
SMS tone volume
Sounds
Stamp
Standby screen
Standby talk times
Starting a call
Start-up
STD
Switching the phone off
Switching the phone on
45
45
26
22
22
61
60
ix
Voice volume
20
Wallpaper
Web page
22
45
Zoom
56
T9 English text input
Talk time
Text entry
Time
Time format
Timezone
ToDo list
Transferring a call
14
14
21
21
21
70
Unsuccessful calls
User’s manual conventions
iii
Vibrator
Videos
Voice mail
Voice memo
Voice recall
22
60
53
72
1_10804

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2004:09:13 10:44:37-03:00
Create Date                     : 2004:08:20 21:23:12Z
Page Count                      : 89
Creation Date                   : 2004:08:20 21:23:12Z
Mod Date                        : 2004:09:13 10:44:37-03:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : ichikawa
Metadata Date                   : 2004:09:13 10:44:37-03:00
Creator                         : ichikawa
Title                           : Manual.book
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools