NEC of America NII5120 PCS GSM Phone User Manual

NEC Corporation of America PCS GSM Phone Users Manual

Users Manual

1Making a Voice/Videophone Call1Enter the phone number of the other partyThe “Enter phone number screen” appears. Always start by entering the area code, even for calls within the same area. You can enter up to 80 digits for the phone number. However, only the last 26 digits are displayed. <When you enter a wrong number>■To insert a numberPress v to move the cursor to the number to the left of the position where you want to insert the number, then enter the number. ■To delete a numberPress v to move the cursor to the number you want to delete, then press t. Hold down t for 1 second or longer to delete all the numbers to the left of the cursor and the number in the cursor position. ■To re-enter the numberMove the cursor to the beginning or end of the number and hold down t for 1 second or longer to return to the standby screen. 2r (voice call) /o (V. phone)* As N-06B is not equipped with the front camera, during a videophone call, you can send only the substitute image (Chara-den) or image from the rear camera to the other party. You can change the substitute image (Chara-den) to other data such as an image of My picture in “Select image”.→P.67<Videophone>■To change the substitute image (Chara-den)XFu (FUNC)X“Select image”X“Chara-den” XSelect Chara-denEnter phone numberFunction menu¨P.48<Voice call>The “In-call screen” appears. “ ” flashes while dialing and lights up during the call. ■If you hear the busy toneThe line is busy. Call again after a while. ■If you hear a message saying that the other party cannot be reachedThe other party’s mobile phone is not turned on or is out of signal range. Call again after a while. ■If you hear a message requesting your caller IDCall again with caller ID notification enabled. →PP.44, 56<Videophone>The “Videophone in-call screen” appears. “ ” flashes while dialing a videophone call and lights up during the call. ■If a videophone call is not connected→P.2■To switch between substitute image and camera imageXDd (Change)Each time you press Dd (Change), the substitute image and camera image switches. ■To switch the main screenXDd (1 second or longer)“Change main disp.”→P.48■To enlarge the camera image to be sentXAdjust the zoom using GvZoom→P.203■To mute the voice to sendXSa (マナー ) (1 second or longer)The “ ” icon is displayed. To cancel muting, press Sa (マナー ) for 1 second or longer again. In-callVideophone in-callFunction menu¨P.48
2■To switch the setting of Hyper Clear Voice→P.5■To switch a voice/videophone call during a call→P.3■To put the current voice/videophone call on hold→P.62■When the 2in1 is in Dual modeThe Outgoing number selection screen appears. Select a phone number. 3To end the call, press y●If a videophone call is not connectedWhen a videophone call is not connected, the cause of the failure appears. zThe cause may not appear depending on the situation. zDepending on the type of other party’s phone or the possible lack of a network service subscription, the reason may not accurately reflect the other party’s actual status. zIf the videophone call is not connected, your call is automatically switched to a voice call when you set “Auto redial as voice” to “ON”. However, the call may not be handled in this way if you call an ISDN synchronous 64K or an ISDN videophone which does not support the 3G-324M standard (as of September, 2008) or if you dial a wrong number. Note that call charge may be applied in some cases.Display CauseCheck number then redialThe called phone number is not usedBusy The line is busy• This message may also appear during packet communication. Busy with packet transmissionThe other party is using packet communicationOut of service area/power offThe other party is out of service area or the phone is turned offYour call is being forwardedThe call is being forwarded (A Videophone call is made when the forwarding number is for a 3G-324M-compatible videophone)Redial using voice callThe phone for the forwarding number is not compatible with videophone callsPlease activate caller ID before dialing againThe other party sets the Caller ID request serviceThis number is not availableThe other party sets the Nuisance call blocking serviceUpper limit has been exceeded Connection failedThe upper limit set for a Limit billing plan (Type Limit and Family Wide limit) is exceededConnection failed You connected without notifying your caller ID (when dialing into visualnet, etc.)• This message may also appear in other situationsSet the caller ID notification to “ON” and retryPlease make your call from the i-mode web pageYou attempted to make a videophone call to watch V-live without browsing the i-mode official siteDisplay Cause
3Switching a Voice/Videophone Call during a Call (Caller)zYou can use this function with the terminals compatible with voice call/videophone call switch. zYou can switch the voice call only when you are the caller. zTo switch the call, the receiver needs to set “Ntfy switch-mode” to notify the switch beforehand. →P.68<Example: To switch a voice call to a videophone call>1In-call screen (P.1)Xd (V. phone) X “YES”While switching, the screen which indicates that the calls are being switched appears and the voice guidance is played. ■To switch a videophone call to a voice callXVideophone in-call screen (P.1)Xu (FUNC) X“Change to voice”Making International Calls<WORLD CALL>WORLD CALL is an international dialing service that can be used from DOCOMO mobile phones. FOMA service subscribers are also subscribed to “WORLD CALL” when they subscribe to the FOMA service. (This excludes subscribers who declared that they did not require the service.)zWORLD CALL can be used to call around 240 countries and regions worldwide. zThe “WORLD CALL” is charged with your monthly call charges. zIn addition to directly dialing a phone number, you can make an international call by adding “+” or selecting “Int’l call” or “Prefix numbers” from the function menu in the enter phone number screen, Redial/Dialed calls screen, Received calls screen or Phonebook detail screen. zThis service is not available in some payment plans. The digital communication fee is charged after the appearance of this screen.For additional information regarding WORLD CALL, refer to the contact information provided on the back of the manual. “International videophone calls” can be made by users of some specific overseas 3G mobile terminals by pressing o (V. phone) to make the call after using the dialing procedure below. zSee the DOCOMO website for information on accessible countries and operators. zDepending on the other party’s terminal, the image of the other party displayed on your FOMA terminal may be distorted or the connection may fail when making an international videophone call.
4Using dial keys to make international calls1Dial the number in the following order: 010→Country code→Area code (Long distance code)→The other party’s phone numberYou can also dial the number in this order: 009130→010→Country code→Area code (Long distance code)→The other party’s phone number.If the area code (long distance code) begins with “0”, omit the first “0”. However, to call to ordinary phones in Italy, “0” is required. 2rThe international call is made. Quick and simple procedures for making an international callzYou can store the country codes and IDD prefix codes in “Int’l dial assistance”. ●Using “+” to make an international callBy using the “+” that is automatically replaced with the “IDD Prefix Code” set in “Auto int’l call set.”, you can make international calls without dialing the IDD prefix code. zAs “Auto int’l call set.” in “Int’l dial assistance” is set to “ON” (automatically added) at the time of purchase, the FOMA terminal automatically dials the IDD prefix code. 1On the standby screen, dial the following; + (0 (1 second or longer))→Country code→Area code (Long distance code)→The other party’s phone numberIf the area code (long distance code) begins with “0”, omit the first “0”. However, to call to ordinary phones in Italy, “0” is required. 2rX“Dial”The international call is made. ■To make a call without converting “+” into the IDD prefix codeX“Original phone No.”■To cancel the callX“Cancel”●Making an international call from the function menuYou can make an international call by adding a country code and IDD prefix code from the function menu. zYou can use the international dial function from the “Enter phone number screen” and the detail screens of “Phonebook/Received calls/Dialed calls/Redial” screens. <Example: To use the international dial function from the enter phone number screen>1Enter the phone number of the other party2u (FUNC)X“Int’l call”XSelect the country codeXSelect the IDD prefix codeThe selected country code and IDD prefix code are added. If the area code (long distance code) begins with “0”, the first “0” is automatically deleted (except when “Italy” is selected for the country code). 3rThe international call is made.
5Making the setting for the international call<Int’l dial assistance>You can set the automatic conversion of “+”, and also edit and store the country codes and IDD prefix code for international calls. 1iX“Settings”X“Dialing”X“Int’l dial assistance”XSelect any item: Auto int’l call set.……You can set the automatic conversion of “+” when you make an international call. X“ON”XSelect a country codeXSelect an IDD prefix code■When you do not convert automaticallyX“OFF”Country Code setting……Stores up to 22 country names and country codes used when you make an international call. See the DOCOMO website for information on country codes. XHighlight an itemXo (Edit)XEnter the country nameXEnter the country codeIDD Prefix setting……Stores the IDD prefix name and IDD prefix code used when you make an international call. Up to 3 entries can be stored. XHighlight an item to be stored or changedXo (Edit)XEnter the IDD prefix nameXEnter the IDD prefix codeClear Earpiece Volume <Hyper Clear Voice>This function detects ambient noise and enables you to hear the other party’s voice clearly. zWhen Hands-free is “ON” or a Flat-plug Earphone/Microphone with Switch (optional) is connected, this function is disabled.1In-call screen (P.1) Xp(//)The mode switches as follows each time you press p; “High”→“OFF”→“Low”. High…… Regardless of ambient noise level, the function activates even in the quiet environment. Low……The function activates only when the ambient noise level is high. OFF……This function does not apply.■To set from the main menuYou can also set from “Hyper Clear Voice” of “Settings” in the main menu. →P.369Country Code settingFunction menu¨P.51IDD Prefix settingFunction menu¨P.58
6Using the Redial/Dialed Calls/Received Calls Record<Redial/Dialed calls/Received calls>Information on dialed or received calls, including the caller’s phone number and the date and time are stored in the Redial/Dialed calls/Received calls record. You can make a call to the other party easily by using these records. zWhen you make calls to the same phone number repeatedly, the latest entry is stored as the Redial record and separate entries are stored for the Dialed calls record. zThe Redial record can hold up to 30 phone numbers for voice/videophone calls. zThe Dialed calls/Received calls record stores up to 30 voice/videophone call entries and 30 packet communication or 64K data communication entries. zIf the maximum number of logs is exceeded, logs are overwritten starting with the oldest one. <Example: To make a call from the Redial/Received calls list screen>1On the standby screenXj (Redial)/h (Received calls)The “Redial screen (list)”/“Received calls screen (list)” appears. ■To check the Dialed callsXiX“Own data”X “Dialed calls”The “Dialed calls screen (list)” appears. 2Highlight the Redial/Received calls record entry■To make a call after checking the details of the Redial/Received calls recordXSelect the Redial/Received calls record entryThe “Redial screen (detail)” or “Received calls screen (detail)” appears. 3r (voice call)/o (V. phone)Receiving a Voice/Videophone Call1Voice/Videophone call is receivedThe ring tone sounds and the incoming call animation is displayed in “My Signal”. The “Ringing screen”/“Videophone ringing screen” appears.■When you receive a call with Chaku-mojiThe Chaku-moji appears on the ringing screen/videophone ringing screen. →P.56■To put a voice/videophone call on hold while the FOMA terminal is ringing→P.622rThe “In-call screen”/“Videophone in-call screen” appears. ■Operations during a videophone callYou can perform various operations during a videophone call such as switching between the substitute image and the camera image and muting the sound. →P.1■When the other party switches a voice/videophone call during a call→P.7■To put the current voice/videophone call on hold→P.623To end the call, press yEx. Redial (list)Function menu¨P.54Ex. Redial (detail)Function menu¨P.54* As N-06B is not equipped with the front camera, during a videophone call, you can send only the substitute image (Chara-den) or image from the rear camera to the other party. You can change the substitute image (Chara-den) to other data such as an image of My picture in “Select image”.→P.67Ringing Videophone ringingFunction menu¨P.59 Function menu¨P.59
7When the Other Party Switches a Voice/Videophone Call (Caller)When you receive a voice/videophone call, the other party can switch the call between voice call and videophone call. zThe receiver cannot switch a voice call to a videophone call. zTo switch the call, the receiver needs to set “Ntfy switch-mode” to notify the switch beforehand. →P.68zYou can use this function with the terminals compatible with voice call/videophone call switch. <Example: When the other party switched a voice call to a videophone call>1In-call screen (P.1)XThe other party switches to a videophone callWhile switching, the screen which indicates that the calls are being switched appears and the voice guidance is played. When the voice call is switched to the videophone call, the substitute image is sent to the other party.■When the other party switched a videophone call to a voice callXVideophone in-call screen (P.1)XThe other party switches to a voice callThe videophone call is switched to the voice call. Using the Dial Keys to Answer a Call<Answer setting>You can use this setting to turn off the ring tone or answer the phone quickly when you receive a call. 1iX“Settings”X“Incoming call”X “Answer setting”XSelect any item: Any key answer……Valid for voice calls. You can answer the call by pressing any of the following keys. r, d (Answer) , 0 to 9, w, t, o, p, a (マナー ), b* For videophone calls, you can answer the call only by ordinary key operations (r, d (Subst.)). Quick silent ……Pressing any of the following keys or opening the FOMA terminal stops the ring tone while the caller continues to hear the ring tone. 0 to 9, w, t, b, p, a (マナー ) or o (for voice calls only)To answer the call, press r, d (Answer/Subst.).OFF……You can answer the call only with r, d (Answer/Subst.).

Navigation menu