NEC of America RSZ3446 GSM/EGPRS/WCDMA/LTE MOBILE PHONE User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	1872063
Application ID	2FaRqrJHZ/cKJ8jceV/iZg==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.25kB (103093 bits)
Date Submitted	2012-12-31 00:00:00
Date Available	2013-06-29 00:00:00
Creation Date	2017-10-28 21:05:29
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-28 21:05:29
Document Title	User Manual 2
Document Creator	Word 用 Acrobat PDFMaker 9.1
Document Author:	Takanori Oikawa

FCC Regulations
This mobile phone complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This product may not cause harmful interference,
and (2) this product must accept any interference received, including interference
that may cause undesired operation.
This mobile phone has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This product generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation; if this product does cause
harmful interference to radio or television reception, which can be determined by
turning the product off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the product and receiver.
 Connect the product into an outlet on a circuit different from that to which the
receiver is connected.
 Consult the dealer or an experienced radio / TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
R a d io F r e q u e n c y (R F ) S ig n a ls
THIS MODEL PHONE MEETS THE U.S. GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone contains a radio transmitter and receiver. Your phone is designed and
manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the U.S. Government. These limits are part
of comprehensive guidelines and establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific studies.
The exposure standard for wireless mobile phones employs a unit of measurement known as
the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR
are conducted using standard operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required to reach the network. In
general, the closer you are to a wireless base station antenna, the lower the output.
Before a phone model is available for sale to the public, it must be tested and certified to the
FCC that it does not exceed the limit established by the U.S. government-adopted requirement
for safe exposure. The tests are performed on position and locations (for example, at the ear
and worn on the body) as required by FCC for each model. The highest SAR value for this
model phone as reported to the FCC when tested for use at the ear is 0.999 W/kg, and when
worn on the body, is 1.045 W/kg. (Body-worn measurements differ among phone models,
depending upon available accessories and FCC requirements). While there may be
differences between the SAR levels of various phones and at various positions, they all meet
the U.S. government requirement.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on
this model phone is on file with the FCC and can be found under the Display Grant section at
https://gullfoss2.fcc.gov/oetcf/eas/reports/GenericSearch.cfm after search on
FCC ID A98-RSZ3446.
For body worn operation, this phone has been tested and meets the FCC RF exposure
guidelines when used with an accessory designated for this product or when used with an
accessory that contains no metal and that positions the handset a minimum of 1.0 cm from the
body. Non-compliance with the above restrictions may result in violation of FCC RF Exposure
guidelines.
* In the United States, the SAR limit for wireless mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. SAR values may vary depending upon national reporting requirements
and the network band.
F C C H e a r in g -A id C o m p a tib ilit y ( H A C )
R e g u la tio n s fo r W ir e le s s D e v ic e s
On July 10, 2003, the U.S.
Federal Communications Commission (FCC) Report and Order
in WT Docket 01-309 modified the exception of wireless phones
under the Hearing Aid Compatibility Act of 1988 (HAC Act) to
require digital wireless phones be compatible with hearing-aids.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some hearing
devices (hearing aids and cochlear implants), users may detect
a buzzing, humming, or whining noise. Some hearing devices
are more immune than others to this interference noise, and
phones also vary in the amount of interference they generate.
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users to find
phones that may be compatible with their hearing devices. Not
all phones have been rated. Phones that are rated have the
rating on their box or a label located on the box.
The ratings are not guarantees. Results will vary depending on
the user’s hearing device and hearing loss. If your hearing
device happens to be vulnerable to interference, you may not be
able to use a rated phone successfully. Trying out the phone with
your hearing device is the best way to evaluate it for your
personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of
5 is considered acceptable for normal use. A sum of 6 is
considered for best use.
In the example shown, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This should provide the hearing aid user
with “normal usage” while using their hearing aid with the
particular wireless phone.
“Normal usage” in this context is defined as a signal quality
that’s acceptable for normal operation.
The M mark is intended to be synonymous with the U mark.
The T mark is intended to be synonymous with the UT mark.
The M and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules. The
HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
When you’re talking over the cell phone, it’s recommended you’d
turn the BT (Bluetooth ®) mode off for HAC.
According to HAC policy (NE-201A1A), we state this handset
has not been rated for hearing aid compatibility with respect to
the Wi-Fi capability.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Takanori Oikawa
Create Date                     : 2012:12:24 15:56:45+08:00
Modify Date                     : 2012:12:26 09:47:30+08:00
Subject                         : 
Title                           : 
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2012:12:26 09:47:30+08:00
Creator Tool                    : Word 用 Acrobat PDFMaker 9.1
Format                          : application/pdf
Creator                         : Takanori Oikawa
Document ID                     : uuid:21ebdaf0-ce48-4bef-865b-d048fdbffb57
Instance ID                     : uuid:3082d430-7388-44ba-8fa7-cf5267a6d138
Producer                        : Adobe Acrobat Pro 9.1.2
Page Count                      : 4

EXIF Metadata provided by EXIF.tools